1

-------------------------------------------------------------------------------

     2

     3

$Id$

     4

     5

-------------------------------------------------------------------------------

     6

     7

Changes in version 1.4.0:

     8

     9

* Realtime interface changes:

    10

    - Replaced ec_slave_t with ec_slave_config_t, separating the slave objects

    11

      from the requested bus configuration. Therefore, renamed

    12

      ecrt_master_get_slave() to ecrt_master_slave_config().

    13

    - Replaced slave address string with alias and position values. See

    14

      ecrt_master_slave_config().

    15

    - Removed ecrt_master_get_slave_by_pos(), because it is no longer

    16

      necessary due to alias/position addressing.

    17

    - Added ec_slave_config_state_t for the new method

    18

      ecrt_slave_config_state().

    19

    - Process data memory for a domain can now be allocated externally. This

    20

      offers the possibility to use a shared-memory region. Therefore,

    21

      added the domain methods ecrt_domain_size() and

    22

      ecrt_domain_external_memory().

    23

    - Replaced the process data pointers in the Pdo entry registration

    24

      functions with a process data offset, that is now returned by

    25

      ecrt_slave_config_reg_pdo_entry(). This was necessary for the external

    26

      domain memory. An additional advantage is, that the returned offset value

    27

      is directly usable. If the domain's process data is allocated internally,

    28

      the start address can be retrieved with ecrt_domain_data().

    29

    - Replaced ecrt_slave_pdo_mapping/add/clear() with

    30

      ecrt_slave_config_pdo() to add a Pdo to the mapping and

    31

      ecrt_slave_config_pdo_entry() to add a Pdo entry to a Pdo configuration.

    32

      ecrt_slave_config_mapping() is a convenience function for

    33

      both, that uses the new data types ec_pdo_info_t and ec_pdo_entry_info_t.

    34

      Mapped Pdo entries can now immediately be registered.

    35

    - Renamed ec_bus_status_t, ec_master_status_t to ec_bus_state_t and

    36

      ec_master_state_t, respectively. Renamed ecrt_master_get_status() to

    37

      ecrt_master_state(), for consistency reasons.

    38

    - Added ec_domain_state_t and ec_wc_state_t for a new output parameter

    39

      of ecrt_domain_state(). The domain state object does now contain

    40

      information, if the process data was exchanged completely.

    41

    - Former "Pdo registration" meant Pdo entry registration in fact, therefore

    42

      renamed ec_pdo_reg_t to ec_pdo_entry_reg_t and ecrt_domain_register_pdo()

    43

      to ecrt_slave_config_reg_pdo_entry().

    44

    - Removed ecrt_domain_register_pdo_range(), because it's functionality can

    45

      be reached by specifying an explicit Pdo mapping and registering those

    46

      Pdo entries.

    47

    - Added an Sdo access interface, working with Sdo requests. These can be

    48

      scheduled for reading and writing during realtime operation.

    49

    - Exported ecrt_slave_config_sdo(), the generic Sdo configuration

    50

      function.

    51

    - Removed the bus_state and bus_tainted flags from ec_master_state_t.

    52

* Replaces the Sysfs interface with a new 'ethercat' command-line tool. See

    53

  'ethercat --help'.

    54

* Removed include/ecdb.h.

    55

* Sdo dictionaries will now also be fetched in operation mode.

    56

* SII write requests will now also be processed in operation mode.

    57

* Mapping of Pdo entries is now supported.

    58

* Current Pdo assignment/mapping is now read via CoE during bus scan, using

    59

  direct Sdo access, independent of the dictionary.

    60

* Network driver news:

    61

    - Added 8139too driver for kernel 2.6.22, thanks to Erwin Burgstaller.

    62

    - Added 8139too driver for kernel 2.6.23, thanks to Richard Hacker.

    63

    - Added 8139too driver for kernel 2.6.24.

    64

    - Added e1000 driver for kernel 2.6.22.

    65

    - Added e1000 driver for kernel 2.6.24, thanks to Matthias Luescher.

    66

    - Added alpha support for the Reaktek r8169 chipset, thanks to Scott

    67

      Hassan.

    68

* Removed the "bus validation" routines. Slave scanning is now done any time

    69

  the bus topology changes, even during realtime operation. Because of this,

    70

  the bus_tainted flag was deprecated and removed.

    71

* Slave configuration is not done during ecrt_master_activate() any more, but

    72

  later during realtime operation. The state of the configuration can be

    73

  queried via the ecrt_domain_state() and ecrt_slave_config_state() functions.

    74

* Added support for slaves that do not support the LRW datagram type. Separate

    75

  domains have to be used for inputs and output.

    76

* Allow gaps in PDO mapping read from CoE.

    77

* Fixed bug in CoE code.

    78

* Ansynchronous handling of CoE Emergency requests.

    79

* Improved handling of large EEPROM contents.

    80

* Renamed ec_master module parameters main and backup to main_devices and

    81

  backup_devices to avoid warnings of some compilers.

    82

* List end evaluate CoE detail flags from general category, list

    83

  'Flags' from general category in slave info file.

    84

* Added MODPROBE_FLAGS variable in start script and sysconfig file.

    85

* Implemented missing datagram types.

    86

* Allow multiple sync manager categories in SII.

    87

* Changed all occurrences of 'EEPROM' to 'SII', renamed the eeprom sysfs file

    88

  to sii, in particular.

    89

    90

-------------------------------------------------------------------------------

    91

    92

Changes in version 1.3.2:

    93

    94

* New feature: Read dynamic PDO mapping from SDO dictionary.

    95

* Implemented SII writing workaround for some broken slaves.

    96

* Improved handling for spontaneous AL state changes.

    97

* Master takes mailbox sync manager configurations from EEPROM words

    98

  0x0018-0x001b, if no sync manager configurations are provided.

    99

* Calculate checksum when writing EEPROM or alias address.

   100

* Fixed source MAC address setting bug.

   101

* Removed config.kbuild and replaced Kbuild files by Kbuild.in files.

   102

   103

-------------------------------------------------------------------------------

   104

   105

Changes in version 1.3.1:

   106

   107

* Improved EoE handling: Avoided skipping of datagrams and release lock

   108

  while processing.

   109

* Added some statistics to the datagram structure.

   110

* Master state machine clears all station addresses with a broadcast datagram

   111

  before setting them.

   112

* Added --enable-eoe conditional.

   113

* Minor extensions of the master info file.

   114

* Improved handling of unexpected working counters.

   115

* Create network interfaces for EoE devices with alias as eoeXaY.

   116

* Fixed problems on big-endian systems.

   117

* Added documentation on how to set up an EoE network.

   118

   119

-------------------------------------------------------------------------------

   120

   121

Changes in version 1.3.0:

   122

   123

* Added Intel PRO/1000 Gigabit Ethernet driver (e1000).

   124

* Added testing version of Intel PRO/100 Ethernet driver (e100).

   125

* Added testing version of NVIDIA nForce Ethernet driver (forcedeth).

   126

* Removed "ec_eoeif_count" master module parameter. EoE handlers are created

   127

  dynamically instead.

   128

* Added "main" and "backup" parameters to master module to hand over the

   129

  MAC addresses of the devices to wait for. This made the ec_device_index

   130

  parameter of the Ethernet drivers obsolete. The broadcast MAC address means,

   131

  that the master accepts the first device offered by any Ethernet driver.

   132

* Changed format of sysconfig file and accordingly adjusted functionality

   133

  of the init script to handle the above MAC address lists.

   134

* Realtime interface changes:

   135

  - ecrt_master_run() became obsolete, because the master state machine is now

   136

    run in process context.

   137

  - Parameter changes in PDO registration functions ecrt_domain_register_pdo()

   138

    and ecrt_register_pdo_range(): Replaced slave_address, vendor ID and

   139

    product code arguments with a slave pointer, which has to be obtained with

   140

    a prior call to ecrt_master_get_slave().

   141

  - ecrt_master_get_slave() got additional parameters to check for vendor ID

   142

    and product code.

   143

  - Removed addressing scheme "X:Y" for ecrt_master_get_slave().

   144

  - Added ecrt_master_get_slave_by_pos() to avoid the string handling of

   145

    ecrt_master_get_slave().

   146

  - Added ecrt_master_get_status() to get status information about the bus.

   147

  - Added functions to set up an alternative PDO mapping for a slave, i. e.

   148

    ec_slave_pdo_mapping_clear(), ec_slave_pdo_mapping_add() and

   149

    ec_slave_pdo_mapping().

   150

* Device interface changes:

   151

  - Replaced ecdev_register() and ecdev_unregister() with ecdev_offer() and

   152

    ecdev_withdraw(), respectively. The device modules now offer all their

   153

    devices to the master. The master then decides, which ones to register.

   154

  - Replaced ecdev_link_state() with ecdev_set_link(); added ecdev_get_link().

   155

* All EEPROM write operations from user space are now blocking until

   156

  writing has finished. Appropriate error codes are returned.

   157

* Implemented setting of the "Secondary slave address" (alias) via sysfs.

   158

* Implemented SDO reading in operation mode via sysfs.

   159

* Removed annoying eeprom_write_enable file. EEPROM writing always enabled.

   160

* Slave configuration is now done exclusively from the master thread. Removed

   161

  ec_master_sync_io(). Userspace threads are now waiting for events in the

   162

  state machine.

   163

* Master state machine scheduled with timeout if idle, otherwise is executed

   164

  as fast as possible (with schedule()).

   165

* Added dummy module for simulation purposes.

   166

* Limited infinite EEPROM reading, if 0xffff limiter word is missing.

   167

* Init script works now properly on non-SUSE distros (no rc.status dependency

   168

  any more).

   169

* Removed EtherCAT line comments from 8139too drivers.

   170

   171

-------------------------------------------------------------------------------

   172

   173

Changes in version 1.2.0:

   174

   175

* Several fixes of bugs and stability issues. Master should now run fine

   176

  with kernels 2.6.17 to 2.6.19.

   177

* Realtime interface changes:

   178

  - Re-introduced ecrt_domain_queue() to allow datagram queuing apart

   179

    from datagram processing. The queuing of a domain's datagrams is not

   180

    done in ecrt_domain_process() any more!

   181

  - Removed ecrt_master_deactivate(). Its functionality was moved into

   182

    ecrt_master_release().

   183

  - Removed ecrt_master_prepare(). Its functionality was moved into

   184

    ecrt_master_activate().

   185

  - Renamed ecdev_start() and ecdev_stop() to ecdev_open() and ecdev_close().

   186

    These two functions now take a pointer to ec_device_t as their arguments.

   187

  - The data_ptr parameter of ecrt_domain_register_pdo(),

   188

    ecrt_domain_register_pdo_list() and ecrt_domain_register_pdo_range() may

   189

    not be NULL any more.

   190

  - Removed ecrt_slave_pdo_size(). This function was deprecated long before.

   191

  - Introduced ECRT_VERSION_MAGIC macro and ecrt_version_magic() function.

   192

* Device interface changes:

   193

  - ec_isr_t was replaced by ec_pollfunc_t, the device driver has to supply

   194

    a poll function to call its ISR. This was introduced because some network

   195

    drivers' interrupt functions have different arguments.

   196

* State machines now try to re-send datagrams on datagram timeout.

   197

* New option -c of the lsec script, displays slave current consumptions and

   198

  remaining current.

   199

* Added frame counter in master info file.

   200

   201

-------------------------------------------------------------------------------

   202

   203

Changes in version 1.1.1:

   204

   205

* State change FSM: Clearing of sync managers before PREOP.

   206

* Added modules_install make target.

   207

* Device modules for kernel 2.6.17.

   208

* SDO configurations available in Sysfs.

   209

* FMMU configurations cleared when going to INIT.

   210

* Slave-specific logs only at debug level 1 (for large buses).

   211

* Slave flags (error, online) available in Sysfs.

   212

* Acknowledging of spontaneous state changes in master FSMs.

   213

* ecrt_master_deactivate() deprecated.

   214

* Persistent slave lists. Slave structures are only regenerated on topology

   215

  change in IDLE mode.

   216

* SDO reading via Sysfs.

   217

* Added ecrt_domain_register_pdo_range()

   218

* Fetching of SDO dictionary.

   219

* Better timing behaviour when starting up under high CPU load.

   220

* Applied Autotools.

   221

* Improved output of lsec.

   222

* SDO download state machine.

   223

   224

-------------------------------------------------------------------------------

   225

   226

Changes in version 1.1:

   227

   228

* Improved realtime interface.

   229

   230

-------------------------------------------------------------------------------