1

-------------------------------------------------------------------------------

     2

     3

$Id$

     4

     5

-------------------------------------------------------------------------------

     6

    14

Changes in version 1.3.0:

    15

    19

* Removed "ec_eoeif_count" master module parameter. EoE handlers are created

    20

  dynamically instead.

    21

* Added "main" and "backup" parameters to master module to hand over the

    22

  MAC addresses of the devices to wait for. This made the ec_device_index

    25

* Changed format of sysconfig file and accordingly adjusted functionality

    26

  of the init script to handle the above MAC address lists.

    27

* Realtime interface changes:

    28

  - ecrt_master_run() became obsolete, because the master state machine is now

    29

    run in process context.

    30

  - Parameter changes in PDO registration functions ecrt_domain_register_pdo()

    31

    and ecrt_register_pdo_range(): Replaced slave_address, vendor ID and

    32

    product code arguments with a slave pointer, which has to be obtained with

    33

    a prior call to ecrt_master_get_slave().

    34

  - ecrt_master_get_slave() got additional parameters to check for vendor ID

    35

    and product code.

    36

  - Removed addressing scheme "X:Y" for ecrt_master_get_slave().

    37

  - Added ecrt_master_get_slave_by_pos() to avoid the string handling of

    38

    ecrt_master_get_slave().

    39

  - Added ecrt_master_get_status() to get status information about the bus.

    40

  - Added functions to set up an alternative PDO mapping for a slave, i. e.

    41

    ec_slave_pdo_mapping_clear(), ec_slave_pdo_mapping_add() and

    42

    ec_slave_pdo_mapping().

    43

* Device interface changes:

    44

  - Replaced ecdev_register() and ecdev_unregister() with ecdev_offer() and

    45

    ecdev_withdraw(), respectively. The device modules now offer all their

    46

    devices to the master. The master then decides, which ones to register.

    47

  - Replaced ecdev_link_state() with ecdev_set_link(); added ecdev_get_link().

    48

* All EEPROM write operations from user space are now blocking until

    49

  writing has finished. Appropriate error codes are returned.

    50

* Implemented setting of the "Secondary slave address" (alias) via sysfs.

    51

* Implemented SDO reading in operation mode via sysfs.

    52

* Removed annoying eeprom_write_enable file. EEPROM writing always enabled.

    53

* Slave configuration is now done exclusively from the master thread. Removed

    54

  ec_master_sync_io(). Userspace threads are now waiting for events in the

    55

  state machine.

    56

* Master state machine scheduled with timeout if idle, otherwise is executed

    57

  as fast as possible (with schedule()).

    59

* Limited infinite EEPROM reading, if 0xffff limiter word is missing.

    60

* Init script works now properly on non-SUSE distros (no rc.status dependency

    61

  any more).

    62

* Removed EtherCAT line comments from 8139too drivers.

    63

    64

-------------------------------------------------------------------------------

    65

    66

Changes in version 1.2.0:

    67

    69

  with kernels 2.6.17 to 2.6.19.

    70

* Realtime interface changes:

    71

  - Re-introduced ecrt_domain_queue() to allow datagram queuing apart

    72

    from datagram processing. The queuing of a domain's datagrams is not

    73

    done in ecrt_domain_process() any more!

    74

  - Removed ecrt_master_deactivate(). Its functionality was moved into

    75

    ecrt_master_release().

    76

  - Removed ecrt_master_prepare(). Its functionality was moved into

    77

    ecrt_master_activate().

    78

  - Renamed ecdev_start() and ecdev_stop() to ecdev_open() and ecdev_close().

    79

    These two functions now take a pointer to ec_device_t as their arguments.

    80

  - The data_ptr parameter of ecrt_domain_register_pdo(),

    81

    ecrt_domain_register_pdo_list() and ecrt_domain_register_pdo_range() may

    82

    not be NULL any more.

    83

  - Removed ecrt_slave_pdo_size(). This function was deprecated long before.

    84

  - Introduced ECRT_VERSION_MAGIC macro and ecrt_version_magic() function.

    85

* Device interface changes:

    86

  - ec_isr_t was replaced by ec_pollfunc_t, the device driver has to supply

    87

    a poll function to call its ISR. This was introduced because some network

    88

    drivers' interrupt functions have different arguments.

    89

* State machines now try to re-send datagrams on datagram timeout.

    90

* New option -c of the lsec script, displays slave current consumptions and

    91

  remaining current.

    92

* Added frame counter in master info file.

    93

    94

-------------------------------------------------------------------------------

    95

    96

Changes in version 1.1.1:

    97

    98

* State change FSM: Clearing of sync managers before PREOP.

    99

* Added modules_install make target.

   100

* Device modules for kernel 2.6.17.

   101

* SDO configurations available in Sysfs.

   102

* FMMU configurations cleared when going to INIT.

   104

* Slave flags (error, online) available in Sysfs.

   105

* Acknowledging of spontaneous state changes in master FSMs.

   106

* ecrt_master_deactivate() deprecated.

   107

* Persistent slave lists. Slave structures are only regenerated on topology

   108

  change in IDLE mode.

   109

* SDO reading via Sysfs.

   110

* Added ecrt_domain_register_pdo_range()

   111

* Fetching of SDO dictionary.

   112

* Better timing behaviour when starting up under high CPU load.

   113

* Applied Autotools.

   114

* Improved output of lsec.

   115

* SDO download state machine.

   116

   117

-------------------------------------------------------------------------------

   118

   119

Changes in version 1.1:

   120

   121

* Improved realtime interface.

   122

   123

-------------------------------------------------------------------------------