--- a/configure.ac Fri Sep 08 13:50:06 2017 +0200
+++ b/configure.ac Fri Sep 08 14:39:38 2017 +0200
@@ -432,6 +432,54 @@
AC_SUBST(E1000E_LAYOUT, [$e1000elayout])
#------------------------------------------------------------------------------
+# igb driver
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([igb],
+ AS_HELP_STRING([--enable-igb],
+ [Enable igb driver]),
+ [
+ case "${enableval}" in
+ yes) enableigb=1
+ ;;
+ no) enableigb=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-igb])
+ ;;
+ esac
+ ],
+ [enableigb=0] # disabled by default
+)
+
+AM_CONDITIONAL(ENABLE_IGB, test "x$enableigb" = "x1")
+AC_SUBST(ENABLE_IGB,[$enableigb])
+
+AC_ARG_WITH([igb-kernel],
+ AC_HELP_STRING(
+ [--with-igb-kernel=<X.Y.Z>],
+ [igb kernel (only if differing)]
+ ),
+ [
+ kerneligb=[$withval]
+ ],
+ [
+ kerneligb=$linuxversion
+ ]
+)
+
+if test "x${enableigb}" = "x1"; then
+ AC_MSG_CHECKING([for kernel for igb driver])
+
+ if test ! -f "${srcdir}/devices/igb/igb_main-${kerneligb}-orig.c"; then
+ AC_MSG_ERROR([kernel $kerneligb not available for igb driver!])
+ fi
+
+ AC_MSG_RESULT([$kerneligb])
+fi
+
+AC_SUBST(KERNEL_IGB,[$kerneligb])
+
+#------------------------------------------------------------------------------
# r8169 driver
#------------------------------------------------------------------------------
@@ -1044,6 +1092,8 @@
devices/e1000/Makefile
devices/e1000e/Kbuild
devices/e1000e/Makefile
+ devices/igb/Kbuild
+ devices/igb/Makefile
ethercat.spec
examples/Kbuild
examples/Makefile
--- a/devices/Kbuild.in Fri Sep 08 13:50:06 2017 +0200
+++ b/devices/Kbuild.in Fri Sep 08 14:39:38 2017 +0200
@@ -70,6 +70,10 @@
obj-m += e1000e/
endif
+ifeq (@ENABLE_IGB@,1)
+ obj-m += igb/
+endif
+
ifeq (@ENABLE_R8169@,1)
EC_R8169_OBJ := r8169-@KERNEL_R8169@-ethercat.o
obj-m += ec_r8169.o
--- a/devices/Makefile.am Fri Sep 08 13:50:06 2017 +0200
+++ b/devices/Makefile.am Fri Sep 08 14:39:38 2017 +0200
@@ -30,12 +30,14 @@
SUBDIRS = \
ccat \
e1000 \
- e1000e
+ e1000e \
+ igb
DIST_SUBDIRS = \
ccat \
e1000 \
- e1000e
+ e1000e \
+ igb
# using HEADERS to enable tags target
noinst_HEADERS = \
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/Kbuild.in Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,64 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2017 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+# ---
+#
+# vim: syntax=make
+#
+#------------------------------------------------------------------------------
+
+TOPDIR := $(src)/../..
+
+REV := $(shell if test -s $(TOPDIR)/revision; then \
+ cat $(TOPDIR)/revision; \
+ else \
+ hg id -i $(TOPDIR) 2>/dev/null || echo "unknown"; \
+ fi)
+
+ifeq (@ENABLE_IGB@,1)
+ obj-m += ec_igb.o
+
+ ec_igb-objs := \
+ e1000_82575-@KERNEL_IGB@-ethercat.o \
+ e1000_i210-@KERNEL_IGB@-ethercat.o \
+ e1000_mac-@KERNEL_IGB@-ethercat.o \
+ e1000_mbx-@KERNEL_IGB@-ethercat.o \
+ e1000_nvm-@KERNEL_IGB@-ethercat.o \
+ e1000_phy-@KERNEL_IGB@-ethercat.o \
+ igb_ethtool-@KERNEL_IGB@-ethercat.o \
+ igb_hwmon-@KERNEL_IGB@-ethercat.o \
+ igb_main-@KERNEL_IGB@-ethercat.o \
+ igb_ptp-@KERNEL_IGB@-ethercat.o
+
+ CFLAGS_igb_main-@KERNEL_IGB@-ethercat.o = -DREV=$(REV)
+endif
+
+KBUILD_EXTRA_SYMBOLS := \
+ @abs_top_builddir@/$(LINUX_SYMVERS) \
+ @abs_top_builddir@/master/$(LINUX_SYMVERS)
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/Makefile.am Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,85 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2017 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+EXTRA_DIST = \
+ e1000_82575-3.18-ethercat.c
+ e1000_82575-3.18-ethercat.h
+ e1000_82575-3.18-orig.c
+ e1000_82575-3.18-orig.h
+ e1000_defines-3.18-ethercat.h
+ e1000_defines-3.18-orig.h
+ e1000_hw-3.18-ethercat.h
+ e1000_hw-3.18-orig.h
+ e1000_i210-3.18-ethercat.c
+ e1000_i210-3.18-ethercat.h
+ e1000_i210-3.18-orig.c
+ e1000_i210-3.18-orig.h
+ e1000_mac-3.18-ethercat.c
+ e1000_mac-3.18-ethercat.h
+ e1000_mac-3.18-orig.c
+ e1000_mac-3.18-orig.h
+ e1000_mbx-3.18-ethercat.c
+ e1000_mbx-3.18-ethercat.h
+ e1000_mbx-3.18-orig.c
+ e1000_mbx-3.18-orig.h
+ e1000_nvm-3.18-ethercat.c
+ e1000_nvm-3.18-ethercat.h
+ e1000_nvm-3.18-orig.c
+ e1000_nvm-3.18-orig.h
+ e1000_phy-3.18-ethercat.c
+ e1000_phy-3.18-ethercat.h
+ e1000_phy-3.18-orig.c
+ e1000_phy-3.18-orig.h
+ e1000_regs-3.18-ethercat.h
+ e1000_regs-3.18-orig.h
+ igb-3.18-ethercat.h
+ igb-3.18-orig.h
+ igb_ethtool-3.18-ethercat.c
+ igb_ethtool-3.18-orig.c
+ igb_hwmon-3.18-ethercat.c
+ igb_hwmon-3.18-orig.c
+ igb_main-3.18-ethercat.c
+ igb_main-3.18-orig.c
+ igb_ptp-3.18-ethercat.c
+ igb_ptp-3.18-orig.c
+
+BUILT_SOURCES = \
+ Kbuild
+
+modules:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
+
+modules_install:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" \
+ INSTALL_MOD_DIR="$(INSTALL_MOD_DIR)" modules_install
+
+clean-local:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_82575-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,2884 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* e1000_82575
+ * e1000_82576
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/i2c.h>
+
+#include "e1000_mac-3.18-ethercat.h"
+#include "e1000_82575-3.18-ethercat.h"
+#include "e1000_i210-3.18-ethercat.h"
+
+static s32 igb_get_invariants_82575(struct e1000_hw *);
+static s32 igb_acquire_phy_82575(struct e1000_hw *);
+static void igb_release_phy_82575(struct e1000_hw *);
+static s32 igb_acquire_nvm_82575(struct e1000_hw *);
+static void igb_release_nvm_82575(struct e1000_hw *);
+static s32 igb_check_for_link_82575(struct e1000_hw *);
+static s32 igb_get_cfg_done_82575(struct e1000_hw *);
+static s32 igb_init_hw_82575(struct e1000_hw *);
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
+static s32 igb_reset_hw_82575(struct e1000_hw *);
+static s32 igb_reset_hw_82580(struct e1000_hw *);
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
+static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *, bool);
+static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *, bool);
+static s32 igb_setup_copper_link_82575(struct e1000_hw *);
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
+ u16 *);
+static s32 igb_get_phy_id_82575(struct e1000_hw *);
+static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
+static bool igb_sgmii_active_82575(struct e1000_hw *);
+static s32 igb_reset_init_script_82575(struct e1000_hw *);
+static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
+static const u16 e1000_82580_rxpbs_table[] = {
+ 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
+
+/**
+ * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
+ * @hw: pointer to the HW structure
+ *
+ * Called to determine if the I2C pins are being used for I2C or as an
+ * external MDIO interface since the two options are mutually exclusive.
+ **/
+static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
+{
+ u32 reg = 0;
+ bool ext_mdio = false;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ reg = rd32(E1000_MDIC);
+ ext_mdio = !!(reg & E1000_MDIC_DEST);
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ reg = rd32(E1000_MDICNFG);
+ ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
+ break;
+ default:
+ break;
+ }
+ return ext_mdio;
+}
+
+/**
+ * igb_check_for_link_media_swap - Check which M88E1112 interface linked
+ * @hw: pointer to the HW structure
+ *
+ * Poll the M88E1112 interfaces to see which interface achieved link.
+ */
+static s32 igb_check_for_link_media_swap(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ u8 port = 0;
+
+ /* Check the copper medium. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (data & E1000_M88E1112_STATUS_LINK)
+ port = E1000_MEDIA_PORT_COPPER;
+
+ /* Check the other medium. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ /* reset page to 0 */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+
+ if (data & E1000_M88E1112_STATUS_LINK)
+ port = E1000_MEDIA_PORT_OTHER;
+
+ /* Determine if a swap needs to happen. */
+ if (port && (hw->dev_spec._82575.media_port != port)) {
+ hw->dev_spec._82575.media_port = port;
+ hw->dev_spec._82575.media_changed = true;
+ } else {
+ ret_val = igb_check_for_link_82575(hw);
+ }
+
+ return 0;
+}
+
+/**
+ * igb_init_phy_params_82575 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u32 ctrl_ext;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ goto out;
+ }
+
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if (igb_sgmii_active_82575(hw)) {
+ phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else {
+ phy->ops.reset = igb_phy_hw_reset;
+ ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ }
+
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ igb_reset_mdicnfg_82580(hw);
+
+ if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
+ phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
+ phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
+ } else {
+ switch (hw->mac.type) {
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ phy->ops.read_reg = igb_read_phy_reg_gs40g;
+ phy->ops.write_reg = igb_write_phy_reg_gs40g;
+ break;
+ default:
+ phy->ops.read_reg = igb_read_phy_reg_igp;
+ phy->ops.write_reg = igb_write_phy_reg_igp;
+ }
+ }
+
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
+ /* Set phy->phy_addr and phy->id. */
+ ret_val = igb_get_phy_id_82575(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Verify phy id and set remaining function pointers */
+ switch (phy->id) {
+ case M88E1543_E_PHY_ID:
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ phy->type = e1000_phy_m88;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ if (phy->id != M88E1111_I_PHY_ID)
+ phy->ops.get_cable_length =
+ igb_get_cable_length_m88_gen2;
+ else
+ phy->ops.get_cable_length = igb_get_cable_length_m88;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ /* Check if this PHY is confgured for media swap. */
+ if (phy->id == M88E1112_E_PHY_ID) {
+ u16 data;
+
+ ret_val = phy->ops.write_reg(hw,
+ E1000_M88E1112_PAGE_ADDR,
+ 2);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw,
+ E1000_M88E1112_MAC_CTRL_1,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >>
+ E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT;
+ if (data == E1000_M88E1112_AUTO_COPPER_SGMII ||
+ data == E1000_M88E1112_AUTO_COPPER_BASEX)
+ hw->mac.ops.check_for_link =
+ igb_check_for_link_media_swap;
+ }
+ break;
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->ops.get_phy_info = igb_get_phy_info_igp;
+ phy->ops.get_cable_length = igb_get_cable_length_igp_2;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
+ break;
+ case I82580_I_PHY_ID:
+ case I350_I_PHY_ID:
+ phy->type = e1000_phy_82580;
+ phy->ops.force_speed_duplex =
+ igb_phy_force_speed_duplex_82580;
+ phy->ops.get_cable_length = igb_get_cable_length_82580;
+ phy->ops.get_phy_info = igb_get_phy_info_82580;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ break;
+ case I210_I_PHY_ID:
+ phy->type = e1000_phy_i210;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_init_nvm_params_82575 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_nvm_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u16 size;
+
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+
+ /* Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* Just in case size is out of range, cap it to the largest
+ * EEPROM size supported
+ */
+ if (size > 15)
+ size = 15;
+
+ nvm->word_size = 1 << size;
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ?
+ 16 : 8;
+ break;
+ }
+ if (nvm->word_size == (1 << 15))
+ nvm->page_size = 128;
+
+ nvm->type = e1000_nvm_eeprom_spi;
+
+ /* NVM Function Pointers */
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ nvm->ops.release = igb_release_nvm_82575;
+ nvm->ops.write = igb_write_nvm_spi;
+ nvm->ops.validate = igb_validate_nvm_checksum;
+ nvm->ops.update = igb_update_nvm_checksum;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+
+ /* override generic family function pointers for specific descendants */
+ switch (hw->mac.type) {
+ case e1000_82580:
+ nvm->ops.validate = igb_validate_nvm_checksum_82580;
+ nvm->ops.update = igb_update_nvm_checksum_82580;
+ break;
+ case e1000_i354:
+ case e1000_i350:
+ nvm->ops.validate = igb_validate_nvm_checksum_i350;
+ nvm->ops.update = igb_update_nvm_checksum_i350;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_init_mac_params_82575 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ switch (mac->type) {
+ case e1000_82576:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ break;
+ case e1000_82580:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+ break;
+ default:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ break;
+ }
+ /* reset */
+ if (mac->type >= e1000_82580)
+ mac->ops.reset_hw = igb_reset_hw_82580;
+ else
+ mac->ops.reset_hw = igb_reset_hw_82575;
+
+ if (mac->type >= e1000_i210) {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_i210;
+
+ } else {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
+ }
+
+ /* Set if part includes ASF firmware */
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ /* enable EEE on i350 parts and later parts */
+ if (mac->type >= e1000_i350)
+ dev_spec->eee_disable = false;
+ else
+ dev_spec->eee_disable = true;
+ /* Allow a single clear of the SW semaphore on I210 and newer */
+ if (mac->type >= e1000_i210)
+ dev_spec->clear_semaphore_once = true;
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? igb_setup_copper_link_82575
+ : igb_setup_serdes_link_82575;
+
+ if (mac->type == e1000_82580) {
+ switch (hw->device_id) {
+ /* feature not supported on these id's */
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ break;
+ default:
+ hw->dev_spec._82575.mas_capable = true;
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * igb_set_sfp_media_type_82575 - derives SFP module media type.
+ * @hw: pointer to the HW structure
+ *
+ * The media type is chosen based on SFP module.
+ * compatibility flags retrieved from SFP ID EEPROM.
+ **/
+static s32 igb_set_sfp_media_type_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_ERR_CONFIG;
+ u32 ctrl_ext = 0;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
+ u8 tranceiver_type = 0;
+ s32 timeout = 3;
+
+ /* Turn I2C interface ON and power on sfp cage */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA);
+
+ wrfl();
+
+ /* Read SFP module data */
+ while (timeout) {
+ ret_val = igb_read_sfp_data_byte(hw,
+ E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET),
+ &tranceiver_type);
+ if (ret_val == 0)
+ break;
+ msleep(100);
+ timeout--;
+ }
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = igb_read_sfp_data_byte(hw,
+ E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET),
+ (u8 *)eth_flags);
+ if (ret_val != 0)
+ goto out;
+
+ /* Check if there is some SFP module plugged and powered */
+ if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) ||
+ (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) {
+ dev_spec->module_plugged = true;
+ if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) {
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ } else if (eth_flags->e100_base_fx) {
+ dev_spec->sgmii_active = true;
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ } else if (eth_flags->e1000_base_t) {
+ dev_spec->sgmii_active = true;
+ hw->phy.media_type = e1000_media_type_copper;
+ } else {
+ hw->phy.media_type = e1000_media_type_unknown;
+ hw_dbg("PHY module has not been recognized\n");
+ goto out;
+ }
+ } else {
+ hw->phy.media_type = e1000_media_type_unknown;
+ }
+ ret_val = 0;
+out:
+ /* Restore I2C interface setting */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ return ret_val;
+}
+
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ s32 ret_val;
+ u32 ctrl_ext = 0;
+ u32 link_mode = 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575EB_COPPER:
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ mac->type = e1000_82575;
+ break;
+ case E1000_DEV_ID_82576:
+ case E1000_DEV_ID_82576_NS:
+ case E1000_DEV_ID_82576_NS_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ case E1000_DEV_ID_82576_SERDES_QUAD:
+ mac->type = e1000_82576;
+ break;
+ case E1000_DEV_ID_82580_COPPER:
+ case E1000_DEV_ID_82580_FIBER:
+ case E1000_DEV_ID_82580_QUAD_FIBER:
+ case E1000_DEV_ID_82580_SERDES:
+ case E1000_DEV_ID_82580_SGMII:
+ case E1000_DEV_ID_82580_COPPER_DUAL:
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ mac->type = e1000_82580;
+ break;
+ case E1000_DEV_ID_I350_COPPER:
+ case E1000_DEV_ID_I350_FIBER:
+ case E1000_DEV_ID_I350_SERDES:
+ case E1000_DEV_ID_I350_SGMII:
+ mac->type = e1000_i350;
+ break;
+ case E1000_DEV_ID_I210_COPPER:
+ case E1000_DEV_ID_I210_FIBER:
+ case E1000_DEV_ID_I210_SERDES:
+ case E1000_DEV_ID_I210_SGMII:
+ case E1000_DEV_ID_I210_COPPER_FLASHLESS:
+ case E1000_DEV_ID_I210_SERDES_FLASHLESS:
+ mac->type = e1000_i210;
+ break;
+ case E1000_DEV_ID_I211_COPPER:
+ mac->type = e1000_i211;
+ break;
+ case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
+ case E1000_DEV_ID_I354_SGMII:
+ case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
+ mac->type = e1000_i354;
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ }
+
+ /* Set media type */
+ /* The 82575 uses bits 22:23 for link mode. The mode can be changed
+ * based on the EEPROM. We cannot rely upon device ID. There
+ * is no distinguishable difference between fiber and internal
+ * SerDes mode on the 82575. There can be an external PHY attached
+ * on the SGMII interface. For this, we'll set sgmii_active to true.
+ */
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = false;
+ dev_spec->module_plugged = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK;
+ switch (link_mode) {
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* Get phy control interface type set (MDIO vs. I2C)*/
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
+ break;
+ }
+ /* fall through for I2C based SGMII */
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+ /* read media type from SFP EEPROM */
+ ret_val = igb_set_sfp_media_type_82575(hw);
+ if ((ret_val != 0) ||
+ (hw->phy.media_type == e1000_media_type_unknown)) {
+ /* If media type was not identified then return media
+ * type defined by the CTRL_EXT settings.
+ */
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+
+ if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) {
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
+ }
+
+ break;
+ }
+
+ /* do not change link mode for 100BaseFX */
+ if (dev_spec->eth_flags.e100_base_fx)
+ break;
+
+ /* change current link mode setting */
+ ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
+
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII;
+ else
+ ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ break;
+ default:
+ break;
+ }
+
+ /* mac initialization and operations */
+ ret_val = igb_init_mac_params_82575(hw);
+ if (ret_val)
+ goto out;
+
+ /* NVM initialization */
+ ret_val = igb_init_nvm_params_82575(hw);
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ ret_val = igb_init_nvm_params_i210(hw);
+ break;
+ default:
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ /* if part supports SR-IOV then initialize mailbox parameters */
+ switch (mac->type) {
+ case e1000_82576:
+ case e1000_i350:
+ igb_init_mbx_params_pf(hw);
+ break;
+ default:
+ break;
+ }
+
+ /* setup PHY parameters */
+ ret_val = igb_init_phy_params_82575(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_acquire_phy_82575 - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * Acquire access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ return hw->mac.ops.acquire_swfw_sync(hw, mask);
+}
+
+/**
+ * igb_release_phy_82575 - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static void igb_release_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+/**
+ * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the serial gigabit media independent
+ * interface and stores the retrieved information in data.
+ **/
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %u is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the serial gigabit
+ * media independent interface.
+ **/
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_id_82575 - Retrieve PHY addr and id
+ * @hw: pointer to the HW structure
+ *
+ * Retrieves the PHY address and ID for both PHY's which do and do not use
+ * sgmi interface.
+ **/
+static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+ u32 ctrl_ext;
+ u32 mdic;
+
+ /* Extra read required for some PHY's on i354 */
+ if (hw->mac.type == e1000_i354)
+ igb_get_phy_id(hw);
+
+ /* For SGMII PHYs, we try the list of possible addresses until
+ * we find one that works. For non-SGMII PHYs
+ * (e.g. integrated copper PHYs), an address of 1 should
+ * work. The result of this function should mean phy->phy_addr
+ * and phy->id are set correctly.
+ */
+ if (!(igb_sgmii_active_82575(hw))) {
+ phy->addr = 1;
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ mdic = rd32(E1000_MDIC);
+ mdic &= E1000_MDIC_PHY_MASK;
+ phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ mdic = rd32(E1000_MDICNFG);
+ mdic &= E1000_MDICNFG_PHY_MASK;
+ phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ /* Power on sgmii phy if it is disabled */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+ wrfl();
+ msleep(300);
+
+ /* The address field in the I2CCMD register is 3 bits and 0 is invalid.
+ * Therefore, we need to test 1-7
+ */
+ for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+ ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+ if (ret_val == 0) {
+ hw_dbg("Vendor ID 0x%08X read at address %u\n",
+ phy_id, phy->addr);
+ /* At the time of this writing, The M88 part is
+ * the only supported SGMII PHY product.
+ */
+ if (phy_id == M88_VENDOR)
+ break;
+ } else {
+ hw_dbg("PHY address %u was unreadable\n", phy->addr);
+ }
+ }
+
+ /* A valid PHY type couldn't be found. */
+ if (phy->addr == 8) {
+ phy->addr = 0;
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ } else {
+ ret_val = igb_get_phy_id(hw);
+ }
+
+ /* restore previous sfp cage power state */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ /* This isn't a true "hard" reset, but is the only reset
+ * available to us at this time.
+ */
+
+ hw_dbg("Soft resetting SGMII attached PHY...\n");
+
+ /* SFP documentation requires the following to configure the SPF module
+ * to work on SGMII. No further documentation is given.
+ */
+ ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_phy_sw_reset(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u16 data;
+
+ data = rd32(E1000_82580_PHY_POWER_MGMT);
+
+ if (active) {
+ data |= E1000_82580_PM_D0_LPLU;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ data &= ~E1000_82580_PM_SPD;
+ } else {
+ data &= ~E1000_82580_PM_D0_LPLU;
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on)
+ data |= E1000_82580_PM_SPD;
+ else if (phy->smart_speed == e1000_smart_speed_off)
+ data &= ~E1000_82580_PM_SPD; }
+
+ wr32(E1000_82580_PHY_POWER_MGMT, data);
+ return 0;
+}
+
+/**
+ * igb_set_d3_lplu_state_82580 - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u16 data;
+
+ data = rd32(E1000_82580_PHY_POWER_MGMT);
+
+ if (!active) {
+ data &= ~E1000_82580_PM_D3_LPLU;
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on)
+ data |= E1000_82580_PM_SPD;
+ else if (phy->smart_speed == e1000_smart_speed_off)
+ data &= ~E1000_82580_PM_SPD;
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= E1000_82580_PM_D3_LPLU;
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ data &= ~E1000_82580_PM_SPD;
+ }
+
+ wr32(E1000_82580_PHY_POWER_MGMT, data);
+ return 0;
+}
+
+/**
+ * igb_acquire_nvm_82575 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_acquire_nvm(hw);
+
+ if (ret_val)
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_nvm_82575 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_82575(struct e1000_hw *hw)
+{
+ igb_release_nvm(hw);
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /* Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_82575 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * igb_get_cfg_done_82575 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * 0. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_NVM_CFG_DONE_PORT_2;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_NVM_CFG_DONE_PORT_3;
+
+ while (timeout) {
+ if (rd32(E1000_EEMNGCTL) & mask)
+ break;
+ usleep_range(1000, 2000);
+ timeout--;
+ }
+ if (!timeout)
+ hw_dbg("MNG configuration cycle has not completed.\n");
+
+ /* If EEPROM is not marked present, init the PHY manually */
+ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3))
+ igb_phy_init_script_igp3(hw);
+
+ return 0;
+}
+
+/**
+ * igb_get_link_up_info_82575 - Get link speed/duplex info
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * This is a wrapper function, if using the serial gigabit media independent
+ * interface, use PCS to retrieve the link speed and duplex information.
+ * Otherwise, use the generic function to get the link speed and duplex info.
+ **/
+static s32 igb_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 ret_val;
+
+ if (hw->phy.media_type != e1000_media_type_copper)
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, speed,
+ duplex);
+ else
+ ret_val = igb_get_speed_and_duplex_copper(hw, speed,
+ duplex);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_link_82575 - Check for link
+ * @hw: pointer to the HW structure
+ *
+ * If sgmii is enabled, then use the pcs register to determine link, otherwise
+ * use the generic interface for determining link.
+ **/
+static s32 igb_check_for_link_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 speed, duplex;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+ &duplex);
+ /* Use this flag to determine if link needs to be checked or
+ * not. If we have link clear the flag so that we do not
+ * continue to check for link.
+ */
+ hw->mac.get_link_status = !hw->mac.serdes_has_link;
+
+ /* Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg("Error configuring flow control\n");
+ } else {
+ ret_val = igb_check_for_copper_link(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ * @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return;
+
+ /* Enable PCS to turn on link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg |= E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* Power up the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ usleep_range(1000, 2000);
+}
+
+/**
+ * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Using the physical coding sub-layer (PCS), retrieve the current speed and
+ * duplex, then store the values in the pointers provided.
+ **/
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 pcs, status;
+
+ /* Set up defaults for the return values of this function */
+ mac->serdes_has_link = false;
+ *speed = 0;
+ *duplex = 0;
+
+ /* Read the PCS Status register for link state. For non-copper mode,
+ * the status register is not accurate. The PCS status register is
+ * used instead.
+ */
+ pcs = rd32(E1000_PCS_LSTAT);
+
+ /* The link up bit determines when link is up on autoneg. The sync ok
+ * gets set once both sides sync up and agree upon link. Stable link
+ * can be determined by checking for both link up and link sync ok
+ */
+ if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
+ mac->serdes_has_link = true;
+
+ /* Detect and store PCS speed */
+ if (pcs & E1000_PCS_LSTS_SPEED_1000)
+ *speed = SPEED_1000;
+ else if (pcs & E1000_PCS_LSTS_SPEED_100)
+ *speed = SPEED_100;
+ else
+ *speed = SPEED_10;
+
+ /* Detect and store PCS duplex */
+ if (pcs & E1000_PCS_LSTS_DUPLEX_FULL)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ /* Check if it is an I354 2.5Gb backplane connection. */
+ if (mac->type == e1000_i354) {
+ status = rd32(E1000_STATUS);
+ if ((status & E1000_STATUS_2P5_SKU) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ *speed = SPEED_2500;
+ *duplex = FULL_DUPLEX;
+ hw_dbg("2500 Mbs, ");
+ hw_dbg("Full Duplex\n");
+ }
+ }
+
+ }
+
+ return 0;
+}
+
+/**
+ * igb_shutdown_serdes_link_82575 - Remove link during power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of fiber serdes, shut down optics and PCS on driver unload
+ * when management pass thru is not enabled.
+ **/
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ if (hw->phy.media_type != e1000_media_type_internal_serdes &&
+ igb_sgmii_active_82575(hw))
+ return;
+
+ if (!igb_enable_mng_pass_thru(hw)) {
+ /* Disable PCS to turn off link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg &= ~E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* shutdown the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg |= E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ usleep_range(1000, 2000);
+ }
+}
+
+/**
+ * igb_reset_hw_82575 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_reset_hw_82575(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 20000);
+
+ ctrl = rd32(E1000_CTRL);
+
+ hw_dbg("Issuing a global reset to MAC\n");
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ rd32(E1000_ICR);
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_init_hw_82575 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 igb_init_hw_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ if ((hw->mac.type >= e1000_i210) &&
+ !(igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_pll_workaround_i210(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Initialize identification LED */
+ ret_val = igb_id_led_init(hw);
+ if (ret_val) {
+ hw_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
+ hw_dbg("Initializing the IEEE VLAN\n");
+ if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
+ igb_clear_vfta_i350(hw);
+ else
+ igb_clear_vfta(hw);
+
+ /* Setup the receive address */
+ igb_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ hw_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(E1000_MTA, i, 0);
+
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igb_setup_link(hw);
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igb_clear_hw_cntrs_82575(hw);
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link_82575 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u32 phpm_reg;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ wr32(E1000_CTRL, ctrl);
+
+ /* Clear Go Link Disconnect bit on supported devices */
+ switch (hw->mac.type) {
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ phpm_reg = rd32(E1000_82580_PHY_POWER_MGMT);
+ phpm_reg &= ~E1000_82580_PM_GO_LINKD;
+ wr32(E1000_82580_PHY_POWER_MGMT, phpm_reg);
+ break;
+ default:
+ break;
+ }
+
+ ret_val = igb_setup_serdes_link_82575(hw);
+ if (ret_val)
+ goto out;
+
+ if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+ /* allow time for SFP cage time to power up phy */
+ msleep(300);
+
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+ switch (hw->phy.type) {
+ case e1000_phy_i210:
+ case e1000_phy_m88:
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1543_E_PHY_ID:
+ case I210_I_PHY_ID:
+ ret_val = igb_copper_link_setup_m88_gen2(hw);
+ break;
+ default:
+ ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ }
+ break;
+ case e1000_phy_igp_3:
+ ret_val = igb_copper_link_setup_igp(hw);
+ break;
+ case e1000_phy_82580:
+ ret_val = igb_copper_link_setup_82580(hw);
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_setup_copper_link(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_serdes_link_82575 - Setup link for serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configure the physical coding sub-layer (PCS) link. The PCS link is
+ * used on copper connections where the serialized gigabit media independent
+ * interface (sgmii), or serdes fiber is being used. Configures the link
+ * for auto-negotiation or forces speed/duplex.
+ **/
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl_ext, ctrl_reg, reg, anadv_reg;
+ bool pcs_autoneg;
+ s32 ret_val = 0;
+ u16 data;
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return ret_val;
+
+
+ /* On the 82575, SerDes loopback mode persists until it is
+ * explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+ /* power on the sfp cage if present and turn on I2C */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg |= E1000_CTRL_SLU;
+
+ if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+ /* set both sw defined pins */
+ ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+ /* Set switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg |= E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+ }
+
+ reg = rd32(E1000_PCS_LCTL);
+
+ /* default pcs_autoneg to the same setting as mac autoneg */
+ pcs_autoneg = hw->mac.autoneg;
+
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* sgmii mode lets the phy handle forcing speed/duplex */
+ pcs_autoneg = true;
+ /* autoneg time out should be disabled for SGMII mode */
+ reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ /* disable PCS autoneg and support parallel detect only */
+ pcs_autoneg = false;
+ default:
+ if (hw->mac.type == e1000_82575 ||
+ hw->mac.type == e1000_82576) {
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+ if (ret_val) {
+ hw_dbg(KERN_DEBUG "NVM Read Error\n\n");
+ return ret_val;
+ }
+
+ if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+ pcs_autoneg = false;
+ }
+
+ /* non-SGMII modes only supports a speed of 1000/Full for the
+ * link so it is best to just force the MAC and let the pcs
+ * link either autoneg or be forced to 1000/Full
+ */
+ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+ E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+ /* set speed of 1000/Full if speed/duplex is forced */
+ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+ break;
+ }
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* New SerDes mode allows for forcing speed or autonegotiating speed
+ * at 1gb. Autoneg should be default set by most drivers. This is the
+ * mode that will be compatible with older link partners and switches.
+ * However, both are supported by the hardware and some drivers/tools.
+ */
+ reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+ E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+ if (pcs_autoneg) {
+ /* Set PCS register for autoneg */
+ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+
+ /* Disable force flow control for autoneg */
+ reg &= ~E1000_PCS_LCTL_FORCE_FCTRL;
+
+ /* Configure flow control advertisement for autoneg */
+ anadv_reg = rd32(E1000_PCS_ANADV);
+ anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE);
+ switch (hw->fc.requested_mode) {
+ case e1000_fc_full:
+ case e1000_fc_rx_pause:
+ anadv_reg |= E1000_TXCW_ASM_DIR;
+ anadv_reg |= E1000_TXCW_PAUSE;
+ break;
+ case e1000_fc_tx_pause:
+ anadv_reg |= E1000_TXCW_ASM_DIR;
+ break;
+ default:
+ break;
+ }
+ wr32(E1000_PCS_ANADV, anadv_reg);
+
+ hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
+ } else {
+ /* Set PCS register for forced link */
+ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
+
+ /* Force flow control for forced link */
+ reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
+ }
+
+ wr32(E1000_PCS_LCTL, reg);
+
+ if (!pcs_autoneg && !igb_sgmii_active_82575(hw))
+ igb_force_mac_fc(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_sgmii_active_82575 - Return sgmii state
+ * @hw: pointer to the HW structure
+ *
+ * 82575 silicon has a serialized gigabit media independent interface (sgmii)
+ * which can be enabled for use in the embedded applications. Simply
+ * return the current state of the sgmii interface.
+ **/
+static bool igb_sgmii_active_82575(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ return dev_spec->sgmii_active;
+}
+
+/**
+ * igb_reset_init_script_82575 - Inits HW defaults after reset
+ * @hw: pointer to the HW structure
+ *
+ * Inits recommended HW defaults after a reset when there is no EEPROM
+ * detected. This is only for the 82575.
+ **/
+static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
+{
+ if (hw->mac.type == e1000_82575) {
+ hw_dbg("Running reset init script for 82575\n");
+ /* SerDes configuration via SERDESCTRL */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
+
+ /* CCM configuration via CCMCTL register */
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
+
+ /* PCIe lanes configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+ /* PCIe PLL Configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_mac_addr_82575 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = igb_check_alt_mac_addr(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_mac_addr(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+ igb_power_down_phy_copper(hw);
+}
+
+/**
+ * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+ igb_clear_hw_cntrs_base(hw);
+
+ rd32(E1000_PRC64);
+ rd32(E1000_PRC127);
+ rd32(E1000_PRC255);
+ rd32(E1000_PRC511);
+ rd32(E1000_PRC1023);
+ rd32(E1000_PRC1522);
+ rd32(E1000_PTC64);
+ rd32(E1000_PTC127);
+ rd32(E1000_PTC255);
+ rd32(E1000_PTC511);
+ rd32(E1000_PTC1023);
+ rd32(E1000_PTC1522);
+
+ rd32(E1000_ALGNERRC);
+ rd32(E1000_RXERRC);
+ rd32(E1000_TNCRS);
+ rd32(E1000_CEXTERR);
+ rd32(E1000_TSCTC);
+ rd32(E1000_TSCTFC);
+
+ rd32(E1000_MGTPRC);
+ rd32(E1000_MGTPDC);
+ rd32(E1000_MGTPTC);
+
+ rd32(E1000_IAC);
+ rd32(E1000_ICRXOC);
+
+ rd32(E1000_ICRXPTC);
+ rd32(E1000_ICRXATC);
+ rd32(E1000_ICTXPTC);
+ rd32(E1000_ICTXATC);
+ rd32(E1000_ICTXQEC);
+ rd32(E1000_ICTXQMTC);
+ rd32(E1000_ICRXDMTC);
+
+ rd32(E1000_CBTMPC);
+ rd32(E1000_HTDPMC);
+ rd32(E1000_CBRMPC);
+ rd32(E1000_RPTHC);
+ rd32(E1000_HGPTC);
+ rd32(E1000_HTCBDPC);
+ rd32(E1000_HGORCL);
+ rd32(E1000_HGORCH);
+ rd32(E1000_HGOTCL);
+ rd32(E1000_HGOTCH);
+ rd32(E1000_LENERRS);
+
+ /* This register should not be read in copper configurations */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+ igb_sgmii_active_82575(hw))
+ rd32(E1000_SCVPC);
+}
+
+/**
+ * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
+ * @hw: pointer to the HW structure
+ *
+ * After rx enable if managability is enabled then there is likely some
+ * bad data at the start of the fifo and possibly in the DMA fifo. This
+ * function clears the fifos and flushes any packets that came in as rx was
+ * being enabled.
+ **/
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+ u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+ int i, ms_wait;
+
+ if (hw->mac.type != e1000_82575 ||
+ !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+ return;
+
+ /* Disable all RX queues */
+ for (i = 0; i < 4; i++) {
+ rxdctl[i] = rd32(E1000_RXDCTL(i));
+ wr32(E1000_RXDCTL(i),
+ rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+ }
+ /* Poll all queues to verify they have shut down */
+ for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+ usleep_range(1000, 2000);
+ rx_enabled = 0;
+ for (i = 0; i < 4; i++)
+ rx_enabled |= rd32(E1000_RXDCTL(i));
+ if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+ break;
+ }
+
+ if (ms_wait == 10)
+ hw_dbg("Queue disable timed out after 10ms\n");
+
+ /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+ * incoming packets are rejected. Set enable and wait 2ms so that
+ * any packet that was coming in as RCTL.EN was set is flushed
+ */
+ rfctl = rd32(E1000_RFCTL);
+ wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+ rlpml = rd32(E1000_RLPML);
+ wr32(E1000_RLPML, 0);
+
+ rctl = rd32(E1000_RCTL);
+ temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+ temp_rctl |= E1000_RCTL_LPE;
+
+ wr32(E1000_RCTL, temp_rctl);
+ wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+ wrfl();
+ usleep_range(2000, 3000);
+
+ /* Enable RX queues that were previously enabled and restore our
+ * previous state
+ */
+ for (i = 0; i < 4; i++)
+ wr32(E1000_RXDCTL(i), rxdctl[i]);
+ wr32(E1000_RCTL, rctl);
+ wrfl();
+
+ wr32(E1000_RLPML, rlpml);
+ wr32(E1000_RFCTL, rfctl);
+
+ /* Flush receive errors generated by workaround */
+ rd32(E1000_ROC);
+ rd32(E1000_RNBC);
+ rd32(E1000_MPC);
+}
+
+/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /* if capabilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /* for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
+ * igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ * @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ * enables/disables L2 switch anti-spoofing functionality.
+ **/
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+ u32 reg_val, reg_offset;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ reg_offset = E1000_DTXSWC;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ reg_offset = E1000_TXSWC;
+ break;
+ default:
+ return;
+ }
+
+ reg_val = rd32(reg_offset);
+ if (enable) {
+ reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs
+ */
+ reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ }
+ wr32(reg_offset, reg_val);
+}
+
+/**
+ * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables L2 switch loopback functionality.
+ **/
+void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 dtxswc;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ dtxswc = rd32(E1000_DTXSWC);
+ if (enable)
+ dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ else
+ dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ wr32(E1000_DTXSWC, dtxswc);
+ break;
+ case e1000_i354:
+ case e1000_i350:
+ dtxswc = rd32(E1000_TXSWC);
+ if (enable)
+ dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ else
+ dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ wr32(E1000_TXSWC, dtxswc);
+ break;
+ default:
+ /* Currently no other hardware supports loopback */
+ break;
+ }
+
+}
+
+/**
+ * igb_vmdq_set_replication_pf - enable or disable vmdq replication
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables replication of packets across multiple pools.
+ **/
+void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 vt_ctl = rd32(E1000_VT_CTL);
+
+ if (enable)
+ vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
+ else
+ vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
+
+ wr32(E1000_VT_CTL, vt_ctl);
+}
+
+/**
+ * igb_read_phy_reg_82580 - Read 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_82580 - Write 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
+ * @hw: pointer to the HW structure
+ *
+ * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * the values found in the EEPROM. This addresses an issue in which these
+ * bits are not restored from EEPROM after reset.
+ **/
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 mdicnfg;
+ u16 nvm_data = 0;
+
+ if (hw->mac.type != e1000_82580)
+ goto out;
+ if (!igb_sgmii_active_82575(hw))
+ goto out;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ mdicnfg = rd32(E1000_MDICNFG);
+ if (nvm_data & NVM_WORD24_EXT_MDIO)
+ mdicnfg |= E1000_MDICNFG_EXT_MDIO;
+ if (nvm_data & NVM_WORD24_COM_MDIO)
+ mdicnfg |= E1000_MDICNFG_COM_MDIO;
+ wr32(E1000_MDICNFG, mdicnfg);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_hw_82580 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets function or entire device (all ports, etc.)
+ * to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ /* BH SW mailbox bit in SW_FW_SYNC */
+ u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+ u32 ctrl;
+ bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+ hw->dev_spec._82575.global_device_reset = false;
+
+ /* due to hw errata, global device reset doesn't always
+ * work on 82580
+ */
+ if (hw->mac.type == e1000_82580)
+ global_device_reset = false;
+
+ /* Get current control state. */
+ ctrl = rd32(E1000_CTRL);
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 11000);
+
+ /* Determine whether or not a global dev reset is requested */
+ if (global_device_reset &&
+ hw->mac.ops.acquire_swfw_sync(hw, swmbsw_mask))
+ global_device_reset = false;
+
+ if (global_device_reset &&
+ !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+ ctrl |= E1000_CTRL_DEV_RST;
+ else
+ ctrl |= E1000_CTRL_RST;
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ /* Add delay to insure DEV_RST has time to complete */
+ if (global_device_reset)
+ usleep_range(5000, 6000);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* clear global device reset status bit */
+ wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ rd32(E1000_ICR);
+
+ ret_val = igb_reset_mdicnfg_82580(hw);
+ if (ret_val)
+ hw_dbg("Could not reset MDICNFG based on EEPROM\n");
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ /* Release semaphore */
+ if (global_device_reset)
+ hw->mac.ops.release_swfw_sync(hw, swmbsw_mask);
+
+ return ret_val;
+}
+
+/**
+ * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ * @data: data received by reading RXPBS register
+ *
+ * The 82580 uses a table based approach for packet buffer allocation sizes.
+ * This function converts the retrieved value into the correct table value
+ * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ * 0x0 36 72 144 1 2 4 8 16
+ * 0x8 35 70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+ u16 ret_val = 0;
+
+ if (data < ARRAY_SIZE(e1000_82580_rxpbs_table))
+ ret_val = e1000_82580_rxpbs_table[data];
+
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_with_offset - Validate EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+ u16 offset)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_with_offset - Update EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
+ &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 eeprom_regions_count = 1;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
+ /* if checksums compatibility bit is set validate checksums
+ * for all 4 ports.
+ */
+ eeprom_regions_count = 4;
+ }
+
+ for (j = 0; j < eeprom_regions_count; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_82580 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum compatibility bit.\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
+ /* set compatibility bit to validate checksums appropriately */
+ nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
+ ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Write Error while updating checksum compatibility bit.\n");
+ goto out;
+ }
+ }
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_i350 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * __igb_access_emi_reg - Read/write EMI register
+ * @hw: pointer to the HW structure
+ * @addr: EMI address to program
+ * @data: pointer to value to read/write from/to the EMI address
+ * @read: boolean flag to indicate read or write
+ **/
+static s32 __igb_access_emi_reg(struct e1000_hw *hw, u16 address,
+ u16 *data, bool read)
+{
+ s32 ret_val = 0;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address);
+ if (ret_val)
+ return ret_val;
+
+ if (read)
+ ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data);
+ else
+ ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data);
+
+ return ret_val;
+}
+
+/**
+ * igb_read_emi_reg - Read Extended Management Interface register
+ * @hw: pointer to the HW structure
+ * @addr: EMI address to program
+ * @data: value to be read from the EMI address
+ **/
+s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
+{
+ return __igb_access_emi_reg(hw, addr, data, true);
+}
+
+/**
+ * igb_set_eee_i350 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @adv1G: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
+ *
+ * Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M)
+{
+ u32 ipcnfg, eeer;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ goto out;
+ ipcnfg = rd32(E1000_IPCNFG);
+ eeer = rd32(E1000_EEER);
+
+ /* enable or disable per user setting */
+ if (!(hw->dev_spec._82575.eee_disable)) {
+ u32 eee_su = rd32(E1000_EEE_SU);
+
+ if (adv100M)
+ ipcnfg |= E1000_IPCNFG_EEE_100M_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN;
+
+ if (adv1G)
+ ipcnfg |= E1000_IPCNFG_EEE_1G_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN;
+
+ eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+
+ /* This bit should not be set in normal operation. */
+ if (eee_su & E1000_EEE_SU_LPI_CLK_STP)
+ hw_dbg("LPI Clock Stop Bit should not be set!\n");
+
+ } else {
+ ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
+ E1000_IPCNFG_EEE_100M_AN);
+ eeer &= ~(E1000_EEER_TX_LPI_EN |
+ E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+ }
+ wr32(E1000_IPCNFG, ipcnfg);
+ wr32(E1000_EEER, eeer);
+ rd32(E1000_IPCNFG);
+ rd32(E1000_EEER);
+out:
+
+ return 0;
+}
+
+/**
+ * igb_set_eee_i354 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @adv1G: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
+ *
+ * Enable/disable EEE legacy mode based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data;
+
+ if ((hw->phy.media_type != e1000_media_type_copper) ||
+ (phy->id != M88E1543_E_PHY_ID))
+ goto out;
+
+ if (!hw->dev_spec._82575.eee_disable) {
+ /* Switch to PHY page 18. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= E1000_M88E1543_EEE_CTRL_1_MS;
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Return the PHY to page 0. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+ if (ret_val)
+ goto out;
+
+ /* Turn on EEE advertisement. */
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ if (adv100M)
+ phy_data |= E1000_EEE_ADV_100_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_100_SUPPORTED;
+
+ if (adv1G)
+ phy_data |= E1000_EEE_ADV_1000_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED;
+
+ ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ phy_data);
+ } else {
+ /* Turn off EEE advertisement. */
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED |
+ E1000_EEE_ADV_1000_SUPPORTED);
+ ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ phy_data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_eee_status_i354 - Get EEE status
+ * @hw: pointer to the HW structure
+ * @status: EEE status
+ *
+ * Get EEE status by guessing based on whether Tx or Rx LPI indications have
+ * been received.
+ **/
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data;
+
+ /* Check if EEE is supported on this device. */
+ if ((hw->phy.media_type != e1000_media_type_copper) ||
+ (phy->id != M88E1543_E_PHY_ID))
+ goto out;
+
+ ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
+ E1000_PCS_STATUS_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD |
+ E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false;
+
+out:
+ return ret_val;
+}
+
+static const u8 e1000_emc_temp_data[4] = {
+ E1000_EMC_INTERNAL_DATA,
+ E1000_EMC_DIODE1_DATA,
+ E1000_EMC_DIODE2_DATA,
+ E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+ E1000_EMC_INTERNAL_THERM_LIMIT,
+ E1000_EMC_DIODE1_THERM_LIMIT,
+ E1000_EMC_DIODE2_THERM_LIMIT,
+ E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+#ifdef CONFIG_IGB_HWMON
+/**
+ * igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ **/
+static s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return 0;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > E1000_MAX_SENSORS)
+ num_sensors = E1000_MAX_SENSORS;
+
+ for (i = 1; i < num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0)
+ hw->phy.ops.read_i2c_byte(hw,
+ e1000_emc_temp_data[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ }
+ return 0;
+}
+
+/**
+ * igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Sets the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+static s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+ data->sensor[0].location = 0x1;
+ data->sensor[0].caution_thresh =
+ (rd32(E1000_THHIGHTC) & 0xFF);
+ data->sensor[0].max_op_thresh =
+ (rd32(E1000_THLOWTC) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return 0;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+ NVM_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+ for (i = 1; i <= num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ e1000_emc_therm_limit[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ therm_limit);
+
+ if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return 0;
+}
+
+#endif
+static struct e1000_mac_operations e1000_mac_ops_82575 = {
+ .init_hw = igb_init_hw_82575,
+ .check_for_link = igb_check_for_link_82575,
+ .rar_set = igb_rar_set,
+ .read_mac_addr = igb_read_mac_addr_82575,
+ .get_speed_and_duplex = igb_get_link_up_info_82575,
+#ifdef CONFIG_IGB_HWMON
+ .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+ .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
+};
+
+static struct e1000_phy_operations e1000_phy_ops_82575 = {
+ .acquire = igb_acquire_phy_82575,
+ .get_cfg_done = igb_get_cfg_done_82575,
+ .release = igb_release_phy_82575,
+ .write_i2c_byte = igb_write_i2c_byte,
+ .read_i2c_byte = igb_read_i2c_byte,
+};
+
+static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
+ .acquire = igb_acquire_nvm_82575,
+ .read = igb_read_nvm_eerd,
+ .release = igb_release_nvm_82575,
+ .write = igb_write_nvm_spi,
+};
+
+const struct e1000_info e1000_82575_info = {
+ .get_invariants = igb_get_invariants_82575,
+ .mac_ops = &e1000_mac_ops_82575,
+ .phy_ops = &e1000_phy_ops_82575,
+ .nvm_ops = &e1000_nvm_ops_82575,
+};
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_82575-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,279 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 *data);
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 data);
+
+#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
+#define E1000_RAR_ENTRIES_82575 16
+#define E1000_RAR_ENTRIES_82576 24
+#define E1000_RAR_ENTRIES_82580 24
+#define E1000_RAR_ENTRIES_I350 32
+
+#define E1000_SW_SYNCH_MB 0x00000100
+#define E1000_STAT_DEV_RST_SET 0x00100000
+#define E1000_CTRL_DEV_RST 0x20000000
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+#define E1000_SRRCTL_TIMESTAMP 0x40000000
+
+
+#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
+#define E1000_MRQC_ENABLE_VMDQ 0x00000003
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
+
+#define E1000_EICR_TX_QUEUE ( \
+ E1000_EICR_TX_QUEUE0 | \
+ E1000_EICR_TX_QUEUE1 | \
+ E1000_EICR_TX_QUEUE2 | \
+ E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+ E1000_EICR_RX_QUEUE0 | \
+ E1000_EICR_RX_QUEUE1 | \
+ E1000_EICR_RX_QUEUE2 | \
+ E1000_EICR_RX_QUEUE3)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ struct {
+ __le16 pkt_info; /* RSS type, Packet type */
+ __le16 hdr_info; /* Split Head, buf len */
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+/* Adv ctxt IPSec ESP len mask */
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
+#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
+
+/* Additional DCA related definitions, note change in position of CPUID */
+#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
+#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
+#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
+#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE (1 << 26)
+#define E1000_ETQF_1588 (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP 0x00008000
+#define E1000_FTQF_1588_TIME_STAMP 0x08000000
+#define E1000_FTQF_MASK 0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP 0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575 0x0400
+#define MAX_NUM_VFS 8
+
+#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
+#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC (1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN (1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
+#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */
+
+#define E1000_DVMOLR_HIDEVLAN 0x20000000 /* Hide vlan enable */
+#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
+#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */
+
+#define E1000_VLVF_ARRAY_SIZE 32
+#define E1000_VLVF_VLANID_MASK 0x00000FFF
+#define E1000_VLVF_POOLSEL_SHIFT 12
+#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT)
+#define E1000_VLVF_LVLAN 0x00100000
+#define E1000_VLVF_VLANID_ENABLE 0x80000000
+
+#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
+
+#define E1000_IOVCTL 0x05BBC
+#define E1000_IOVCTL_REUSE_VFQ 0x00000001
+
+#define E1000_RPLOLR_STRVLAN 0x40000000
+#define E1000_RPLOLR_STRCRC 0x80000000
+
+#define E1000_DTXCTL_8023LL 0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN 0x0020
+#define E1000_DTXCTL_SPOOF_INT 0x0040
+
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14)
+
+#define ALL_QUEUES 0xFFFF
+
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
+void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
+void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
+u16 igb_rxpbs_adjust_82580(u32 data);
+s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
+s32 igb_set_eee_i350(struct e1000_hw *, bool adv1G, bool adv100M);
+s32 igb_set_eee_i354(struct e1000_hw *, bool adv1G, bool adv100M);
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status);
+
+#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define E1000_EMC_INTERNAL_DATA 0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20
+#define E1000_EMC_DIODE1_DATA 0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT 0x19
+#define E1000_EMC_DIODE2_DATA 0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A
+#define E1000_EMC_DIODE3_DATA 0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT 0x30
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_82575-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,2884 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* e1000_82575
+ * e1000_82576
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/i2c.h>
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+#include "e1000_i210.h"
+
+static s32 igb_get_invariants_82575(struct e1000_hw *);
+static s32 igb_acquire_phy_82575(struct e1000_hw *);
+static void igb_release_phy_82575(struct e1000_hw *);
+static s32 igb_acquire_nvm_82575(struct e1000_hw *);
+static void igb_release_nvm_82575(struct e1000_hw *);
+static s32 igb_check_for_link_82575(struct e1000_hw *);
+static s32 igb_get_cfg_done_82575(struct e1000_hw *);
+static s32 igb_init_hw_82575(struct e1000_hw *);
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
+static s32 igb_reset_hw_82575(struct e1000_hw *);
+static s32 igb_reset_hw_82580(struct e1000_hw *);
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
+static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *, bool);
+static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *, bool);
+static s32 igb_setup_copper_link_82575(struct e1000_hw *);
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
+ u16 *);
+static s32 igb_get_phy_id_82575(struct e1000_hw *);
+static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
+static bool igb_sgmii_active_82575(struct e1000_hw *);
+static s32 igb_reset_init_script_82575(struct e1000_hw *);
+static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
+static const u16 e1000_82580_rxpbs_table[] = {
+ 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
+
+/**
+ * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
+ * @hw: pointer to the HW structure
+ *
+ * Called to determine if the I2C pins are being used for I2C or as an
+ * external MDIO interface since the two options are mutually exclusive.
+ **/
+static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
+{
+ u32 reg = 0;
+ bool ext_mdio = false;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ reg = rd32(E1000_MDIC);
+ ext_mdio = !!(reg & E1000_MDIC_DEST);
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ reg = rd32(E1000_MDICNFG);
+ ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
+ break;
+ default:
+ break;
+ }
+ return ext_mdio;
+}
+
+/**
+ * igb_check_for_link_media_swap - Check which M88E1112 interface linked
+ * @hw: pointer to the HW structure
+ *
+ * Poll the M88E1112 interfaces to see which interface achieved link.
+ */
+static s32 igb_check_for_link_media_swap(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ u8 port = 0;
+
+ /* Check the copper medium. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (data & E1000_M88E1112_STATUS_LINK)
+ port = E1000_MEDIA_PORT_COPPER;
+
+ /* Check the other medium. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ /* reset page to 0 */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
+ if (ret_val)
+ return ret_val;
+
+ if (data & E1000_M88E1112_STATUS_LINK)
+ port = E1000_MEDIA_PORT_OTHER;
+
+ /* Determine if a swap needs to happen. */
+ if (port && (hw->dev_spec._82575.media_port != port)) {
+ hw->dev_spec._82575.media_port = port;
+ hw->dev_spec._82575.media_changed = true;
+ } else {
+ ret_val = igb_check_for_link_82575(hw);
+ }
+
+ return 0;
+}
+
+/**
+ * igb_init_phy_params_82575 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u32 ctrl_ext;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ goto out;
+ }
+
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if (igb_sgmii_active_82575(hw)) {
+ phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else {
+ phy->ops.reset = igb_phy_hw_reset;
+ ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ }
+
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ igb_reset_mdicnfg_82580(hw);
+
+ if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
+ phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
+ phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
+ } else {
+ switch (hw->mac.type) {
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ phy->ops.read_reg = igb_read_phy_reg_gs40g;
+ phy->ops.write_reg = igb_write_phy_reg_gs40g;
+ break;
+ default:
+ phy->ops.read_reg = igb_read_phy_reg_igp;
+ phy->ops.write_reg = igb_write_phy_reg_igp;
+ }
+ }
+
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
+ /* Set phy->phy_addr and phy->id. */
+ ret_val = igb_get_phy_id_82575(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Verify phy id and set remaining function pointers */
+ switch (phy->id) {
+ case M88E1543_E_PHY_ID:
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ phy->type = e1000_phy_m88;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ if (phy->id != M88E1111_I_PHY_ID)
+ phy->ops.get_cable_length =
+ igb_get_cable_length_m88_gen2;
+ else
+ phy->ops.get_cable_length = igb_get_cable_length_m88;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ /* Check if this PHY is confgured for media swap. */
+ if (phy->id == M88E1112_E_PHY_ID) {
+ u16 data;
+
+ ret_val = phy->ops.write_reg(hw,
+ E1000_M88E1112_PAGE_ADDR,
+ 2);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw,
+ E1000_M88E1112_MAC_CTRL_1,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >>
+ E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT;
+ if (data == E1000_M88E1112_AUTO_COPPER_SGMII ||
+ data == E1000_M88E1112_AUTO_COPPER_BASEX)
+ hw->mac.ops.check_for_link =
+ igb_check_for_link_media_swap;
+ }
+ break;
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->ops.get_phy_info = igb_get_phy_info_igp;
+ phy->ops.get_cable_length = igb_get_cable_length_igp_2;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
+ break;
+ case I82580_I_PHY_ID:
+ case I350_I_PHY_ID:
+ phy->type = e1000_phy_82580;
+ phy->ops.force_speed_duplex =
+ igb_phy_force_speed_duplex_82580;
+ phy->ops.get_cable_length = igb_get_cable_length_82580;
+ phy->ops.get_phy_info = igb_get_phy_info_82580;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ break;
+ case I210_I_PHY_ID:
+ phy->type = e1000_phy_i210;
+ phy->ops.check_polarity = igb_check_polarity_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+ phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_init_nvm_params_82575 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_nvm_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u16 size;
+
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+
+ /* Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* Just in case size is out of range, cap it to the largest
+ * EEPROM size supported
+ */
+ if (size > 15)
+ size = 15;
+
+ nvm->word_size = 1 << size;
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ?
+ 16 : 8;
+ break;
+ }
+ if (nvm->word_size == (1 << 15))
+ nvm->page_size = 128;
+
+ nvm->type = e1000_nvm_eeprom_spi;
+
+ /* NVM Function Pointers */
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ nvm->ops.release = igb_release_nvm_82575;
+ nvm->ops.write = igb_write_nvm_spi;
+ nvm->ops.validate = igb_validate_nvm_checksum;
+ nvm->ops.update = igb_update_nvm_checksum;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+
+ /* override generic family function pointers for specific descendants */
+ switch (hw->mac.type) {
+ case e1000_82580:
+ nvm->ops.validate = igb_validate_nvm_checksum_82580;
+ nvm->ops.update = igb_update_nvm_checksum_82580;
+ break;
+ case e1000_i354:
+ case e1000_i350:
+ nvm->ops.validate = igb_validate_nvm_checksum_i350;
+ nvm->ops.update = igb_update_nvm_checksum_i350;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_init_mac_params_82575 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ switch (mac->type) {
+ case e1000_82576:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ break;
+ case e1000_82580:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+ break;
+ default:
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ break;
+ }
+ /* reset */
+ if (mac->type >= e1000_82580)
+ mac->ops.reset_hw = igb_reset_hw_82580;
+ else
+ mac->ops.reset_hw = igb_reset_hw_82575;
+
+ if (mac->type >= e1000_i210) {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_i210;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_i210;
+
+ } else {
+ mac->ops.acquire_swfw_sync = igb_acquire_swfw_sync_82575;
+ mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
+ }
+
+ /* Set if part includes ASF firmware */
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ /* enable EEE on i350 parts and later parts */
+ if (mac->type >= e1000_i350)
+ dev_spec->eee_disable = false;
+ else
+ dev_spec->eee_disable = true;
+ /* Allow a single clear of the SW semaphore on I210 and newer */
+ if (mac->type >= e1000_i210)
+ dev_spec->clear_semaphore_once = true;
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? igb_setup_copper_link_82575
+ : igb_setup_serdes_link_82575;
+
+ if (mac->type == e1000_82580) {
+ switch (hw->device_id) {
+ /* feature not supported on these id's */
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ break;
+ default:
+ hw->dev_spec._82575.mas_capable = true;
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * igb_set_sfp_media_type_82575 - derives SFP module media type.
+ * @hw: pointer to the HW structure
+ *
+ * The media type is chosen based on SFP module.
+ * compatibility flags retrieved from SFP ID EEPROM.
+ **/
+static s32 igb_set_sfp_media_type_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_ERR_CONFIG;
+ u32 ctrl_ext = 0;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
+ u8 tranceiver_type = 0;
+ s32 timeout = 3;
+
+ /* Turn I2C interface ON and power on sfp cage */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA);
+
+ wrfl();
+
+ /* Read SFP module data */
+ while (timeout) {
+ ret_val = igb_read_sfp_data_byte(hw,
+ E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET),
+ &tranceiver_type);
+ if (ret_val == 0)
+ break;
+ msleep(100);
+ timeout--;
+ }
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = igb_read_sfp_data_byte(hw,
+ E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET),
+ (u8 *)eth_flags);
+ if (ret_val != 0)
+ goto out;
+
+ /* Check if there is some SFP module plugged and powered */
+ if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) ||
+ (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) {
+ dev_spec->module_plugged = true;
+ if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) {
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ } else if (eth_flags->e100_base_fx) {
+ dev_spec->sgmii_active = true;
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ } else if (eth_flags->e1000_base_t) {
+ dev_spec->sgmii_active = true;
+ hw->phy.media_type = e1000_media_type_copper;
+ } else {
+ hw->phy.media_type = e1000_media_type_unknown;
+ hw_dbg("PHY module has not been recognized\n");
+ goto out;
+ }
+ } else {
+ hw->phy.media_type = e1000_media_type_unknown;
+ }
+ ret_val = 0;
+out:
+ /* Restore I2C interface setting */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ return ret_val;
+}
+
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ s32 ret_val;
+ u32 ctrl_ext = 0;
+ u32 link_mode = 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575EB_COPPER:
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ mac->type = e1000_82575;
+ break;
+ case E1000_DEV_ID_82576:
+ case E1000_DEV_ID_82576_NS:
+ case E1000_DEV_ID_82576_NS_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ case E1000_DEV_ID_82576_SERDES_QUAD:
+ mac->type = e1000_82576;
+ break;
+ case E1000_DEV_ID_82580_COPPER:
+ case E1000_DEV_ID_82580_FIBER:
+ case E1000_DEV_ID_82580_QUAD_FIBER:
+ case E1000_DEV_ID_82580_SERDES:
+ case E1000_DEV_ID_82580_SGMII:
+ case E1000_DEV_ID_82580_COPPER_DUAL:
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ mac->type = e1000_82580;
+ break;
+ case E1000_DEV_ID_I350_COPPER:
+ case E1000_DEV_ID_I350_FIBER:
+ case E1000_DEV_ID_I350_SERDES:
+ case E1000_DEV_ID_I350_SGMII:
+ mac->type = e1000_i350;
+ break;
+ case E1000_DEV_ID_I210_COPPER:
+ case E1000_DEV_ID_I210_FIBER:
+ case E1000_DEV_ID_I210_SERDES:
+ case E1000_DEV_ID_I210_SGMII:
+ case E1000_DEV_ID_I210_COPPER_FLASHLESS:
+ case E1000_DEV_ID_I210_SERDES_FLASHLESS:
+ mac->type = e1000_i210;
+ break;
+ case E1000_DEV_ID_I211_COPPER:
+ mac->type = e1000_i211;
+ break;
+ case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
+ case E1000_DEV_ID_I354_SGMII:
+ case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
+ mac->type = e1000_i354;
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ }
+
+ /* Set media type */
+ /* The 82575 uses bits 22:23 for link mode. The mode can be changed
+ * based on the EEPROM. We cannot rely upon device ID. There
+ * is no distinguishable difference between fiber and internal
+ * SerDes mode on the 82575. There can be an external PHY attached
+ * on the SGMII interface. For this, we'll set sgmii_active to true.
+ */
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = false;
+ dev_spec->module_plugged = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK;
+ switch (link_mode) {
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* Get phy control interface type set (MDIO vs. I2C)*/
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
+ break;
+ }
+ /* fall through for I2C based SGMII */
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+ /* read media type from SFP EEPROM */
+ ret_val = igb_set_sfp_media_type_82575(hw);
+ if ((ret_val != 0) ||
+ (hw->phy.media_type == e1000_media_type_unknown)) {
+ /* If media type was not identified then return media
+ * type defined by the CTRL_EXT settings.
+ */
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+
+ if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) {
+ hw->phy.media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = true;
+ }
+
+ break;
+ }
+
+ /* do not change link mode for 100BaseFX */
+ if (dev_spec->eth_flags.e100_base_fx)
+ break;
+
+ /* change current link mode setting */
+ ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
+
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII;
+ else
+ ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ break;
+ default:
+ break;
+ }
+
+ /* mac initialization and operations */
+ ret_val = igb_init_mac_params_82575(hw);
+ if (ret_val)
+ goto out;
+
+ /* NVM initialization */
+ ret_val = igb_init_nvm_params_82575(hw);
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ ret_val = igb_init_nvm_params_i210(hw);
+ break;
+ default:
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ /* if part supports SR-IOV then initialize mailbox parameters */
+ switch (mac->type) {
+ case e1000_82576:
+ case e1000_i350:
+ igb_init_mbx_params_pf(hw);
+ break;
+ default:
+ break;
+ }
+
+ /* setup PHY parameters */
+ ret_val = igb_init_phy_params_82575(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_acquire_phy_82575 - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * Acquire access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ return hw->mac.ops.acquire_swfw_sync(hw, mask);
+}
+
+/**
+ * igb_release_phy_82575 - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static void igb_release_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+/**
+ * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the serial gigabit media independent
+ * interface and stores the retrieved information in data.
+ **/
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %u is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the serial gigabit
+ * media independent interface.
+ **/
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_id_82575 - Retrieve PHY addr and id
+ * @hw: pointer to the HW structure
+ *
+ * Retrieves the PHY address and ID for both PHY's which do and do not use
+ * sgmi interface.
+ **/
+static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+ u32 ctrl_ext;
+ u32 mdic;
+
+ /* Extra read required for some PHY's on i354 */
+ if (hw->mac.type == e1000_i354)
+ igb_get_phy_id(hw);
+
+ /* For SGMII PHYs, we try the list of possible addresses until
+ * we find one that works. For non-SGMII PHYs
+ * (e.g. integrated copper PHYs), an address of 1 should
+ * work. The result of this function should mean phy->phy_addr
+ * and phy->id are set correctly.
+ */
+ if (!(igb_sgmii_active_82575(hw))) {
+ phy->addr = 1;
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ mdic = rd32(E1000_MDIC);
+ mdic &= E1000_MDIC_PHY_MASK;
+ phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ mdic = rd32(E1000_MDICNFG);
+ mdic &= E1000_MDICNFG_PHY_MASK;
+ phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ /* Power on sgmii phy if it is disabled */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+ wrfl();
+ msleep(300);
+
+ /* The address field in the I2CCMD register is 3 bits and 0 is invalid.
+ * Therefore, we need to test 1-7
+ */
+ for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+ ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+ if (ret_val == 0) {
+ hw_dbg("Vendor ID 0x%08X read at address %u\n",
+ phy_id, phy->addr);
+ /* At the time of this writing, The M88 part is
+ * the only supported SGMII PHY product.
+ */
+ if (phy_id == M88_VENDOR)
+ break;
+ } else {
+ hw_dbg("PHY address %u was unreadable\n", phy->addr);
+ }
+ }
+
+ /* A valid PHY type couldn't be found. */
+ if (phy->addr == 8) {
+ phy->addr = 0;
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ } else {
+ ret_val = igb_get_phy_id(hw);
+ }
+
+ /* restore previous sfp cage power state */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ /* This isn't a true "hard" reset, but is the only reset
+ * available to us at this time.
+ */
+
+ hw_dbg("Soft resetting SGMII attached PHY...\n");
+
+ /* SFP documentation requires the following to configure the SPF module
+ * to work on SGMII. No further documentation is given.
+ */
+ ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_phy_sw_reset(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u16 data;
+
+ data = rd32(E1000_82580_PHY_POWER_MGMT);
+
+ if (active) {
+ data |= E1000_82580_PM_D0_LPLU;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ data &= ~E1000_82580_PM_SPD;
+ } else {
+ data &= ~E1000_82580_PM_D0_LPLU;
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on)
+ data |= E1000_82580_PM_SPD;
+ else if (phy->smart_speed == e1000_smart_speed_off)
+ data &= ~E1000_82580_PM_SPD; }
+
+ wr32(E1000_82580_PHY_POWER_MGMT, data);
+ return 0;
+}
+
+/**
+ * igb_set_d3_lplu_state_82580 - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u16 data;
+
+ data = rd32(E1000_82580_PHY_POWER_MGMT);
+
+ if (!active) {
+ data &= ~E1000_82580_PM_D3_LPLU;
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on)
+ data |= E1000_82580_PM_SPD;
+ else if (phy->smart_speed == e1000_smart_speed_off)
+ data &= ~E1000_82580_PM_SPD;
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= E1000_82580_PM_D3_LPLU;
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ data &= ~E1000_82580_PM_SPD;
+ }
+
+ wr32(E1000_82580_PHY_POWER_MGMT, data);
+ return 0;
+}
+
+/**
+ * igb_acquire_nvm_82575 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_acquire_nvm(hw);
+
+ if (ret_val)
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_nvm_82575 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_82575(struct e1000_hw *hw)
+{
+ igb_release_nvm(hw);
+ hw->mac.ops.release_swfw_sync(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /* Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_82575 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * igb_get_cfg_done_82575 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * 0. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_NVM_CFG_DONE_PORT_2;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_NVM_CFG_DONE_PORT_3;
+
+ while (timeout) {
+ if (rd32(E1000_EEMNGCTL) & mask)
+ break;
+ usleep_range(1000, 2000);
+ timeout--;
+ }
+ if (!timeout)
+ hw_dbg("MNG configuration cycle has not completed.\n");
+
+ /* If EEPROM is not marked present, init the PHY manually */
+ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3))
+ igb_phy_init_script_igp3(hw);
+
+ return 0;
+}
+
+/**
+ * igb_get_link_up_info_82575 - Get link speed/duplex info
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * This is a wrapper function, if using the serial gigabit media independent
+ * interface, use PCS to retrieve the link speed and duplex information.
+ * Otherwise, use the generic function to get the link speed and duplex info.
+ **/
+static s32 igb_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 ret_val;
+
+ if (hw->phy.media_type != e1000_media_type_copper)
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, speed,
+ duplex);
+ else
+ ret_val = igb_get_speed_and_duplex_copper(hw, speed,
+ duplex);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_link_82575 - Check for link
+ * @hw: pointer to the HW structure
+ *
+ * If sgmii is enabled, then use the pcs register to determine link, otherwise
+ * use the generic interface for determining link.
+ **/
+static s32 igb_check_for_link_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 speed, duplex;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+ &duplex);
+ /* Use this flag to determine if link needs to be checked or
+ * not. If we have link clear the flag so that we do not
+ * continue to check for link.
+ */
+ hw->mac.get_link_status = !hw->mac.serdes_has_link;
+
+ /* Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg("Error configuring flow control\n");
+ } else {
+ ret_val = igb_check_for_copper_link(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ * @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return;
+
+ /* Enable PCS to turn on link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg |= E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* Power up the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ usleep_range(1000, 2000);
+}
+
+/**
+ * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Using the physical coding sub-layer (PCS), retrieve the current speed and
+ * duplex, then store the values in the pointers provided.
+ **/
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 pcs, status;
+
+ /* Set up defaults for the return values of this function */
+ mac->serdes_has_link = false;
+ *speed = 0;
+ *duplex = 0;
+
+ /* Read the PCS Status register for link state. For non-copper mode,
+ * the status register is not accurate. The PCS status register is
+ * used instead.
+ */
+ pcs = rd32(E1000_PCS_LSTAT);
+
+ /* The link up bit determines when link is up on autoneg. The sync ok
+ * gets set once both sides sync up and agree upon link. Stable link
+ * can be determined by checking for both link up and link sync ok
+ */
+ if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
+ mac->serdes_has_link = true;
+
+ /* Detect and store PCS speed */
+ if (pcs & E1000_PCS_LSTS_SPEED_1000)
+ *speed = SPEED_1000;
+ else if (pcs & E1000_PCS_LSTS_SPEED_100)
+ *speed = SPEED_100;
+ else
+ *speed = SPEED_10;
+
+ /* Detect and store PCS duplex */
+ if (pcs & E1000_PCS_LSTS_DUPLEX_FULL)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ /* Check if it is an I354 2.5Gb backplane connection. */
+ if (mac->type == e1000_i354) {
+ status = rd32(E1000_STATUS);
+ if ((status & E1000_STATUS_2P5_SKU) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ *speed = SPEED_2500;
+ *duplex = FULL_DUPLEX;
+ hw_dbg("2500 Mbs, ");
+ hw_dbg("Full Duplex\n");
+ }
+ }
+
+ }
+
+ return 0;
+}
+
+/**
+ * igb_shutdown_serdes_link_82575 - Remove link during power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of fiber serdes, shut down optics and PCS on driver unload
+ * when management pass thru is not enabled.
+ **/
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ if (hw->phy.media_type != e1000_media_type_internal_serdes &&
+ igb_sgmii_active_82575(hw))
+ return;
+
+ if (!igb_enable_mng_pass_thru(hw)) {
+ /* Disable PCS to turn off link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg &= ~E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* shutdown the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg |= E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ usleep_range(1000, 2000);
+ }
+}
+
+/**
+ * igb_reset_hw_82575 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_reset_hw_82575(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 20000);
+
+ ctrl = rd32(E1000_CTRL);
+
+ hw_dbg("Issuing a global reset to MAC\n");
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ rd32(E1000_ICR);
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_init_hw_82575 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 igb_init_hw_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ if ((hw->mac.type >= e1000_i210) &&
+ !(igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_pll_workaround_i210(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Initialize identification LED */
+ ret_val = igb_id_led_init(hw);
+ if (ret_val) {
+ hw_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
+ hw_dbg("Initializing the IEEE VLAN\n");
+ if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
+ igb_clear_vfta_i350(hw);
+ else
+ igb_clear_vfta(hw);
+
+ /* Setup the receive address */
+ igb_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ hw_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(E1000_MTA, i, 0);
+
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igb_setup_link(hw);
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igb_clear_hw_cntrs_82575(hw);
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link_82575 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u32 phpm_reg;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ wr32(E1000_CTRL, ctrl);
+
+ /* Clear Go Link Disconnect bit on supported devices */
+ switch (hw->mac.type) {
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ phpm_reg = rd32(E1000_82580_PHY_POWER_MGMT);
+ phpm_reg &= ~E1000_82580_PM_GO_LINKD;
+ wr32(E1000_82580_PHY_POWER_MGMT, phpm_reg);
+ break;
+ default:
+ break;
+ }
+
+ ret_val = igb_setup_serdes_link_82575(hw);
+ if (ret_val)
+ goto out;
+
+ if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+ /* allow time for SFP cage time to power up phy */
+ msleep(300);
+
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+ switch (hw->phy.type) {
+ case e1000_phy_i210:
+ case e1000_phy_m88:
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1543_E_PHY_ID:
+ case I210_I_PHY_ID:
+ ret_val = igb_copper_link_setup_m88_gen2(hw);
+ break;
+ default:
+ ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ }
+ break;
+ case e1000_phy_igp_3:
+ ret_val = igb_copper_link_setup_igp(hw);
+ break;
+ case e1000_phy_82580:
+ ret_val = igb_copper_link_setup_82580(hw);
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_setup_copper_link(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_serdes_link_82575 - Setup link for serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configure the physical coding sub-layer (PCS) link. The PCS link is
+ * used on copper connections where the serialized gigabit media independent
+ * interface (sgmii), or serdes fiber is being used. Configures the link
+ * for auto-negotiation or forces speed/duplex.
+ **/
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl_ext, ctrl_reg, reg, anadv_reg;
+ bool pcs_autoneg;
+ s32 ret_val = 0;
+ u16 data;
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return ret_val;
+
+
+ /* On the 82575, SerDes loopback mode persists until it is
+ * explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+ /* power on the sfp cage if present and turn on I2C */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg |= E1000_CTRL_SLU;
+
+ if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+ /* set both sw defined pins */
+ ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+ /* Set switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg |= E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+ }
+
+ reg = rd32(E1000_PCS_LCTL);
+
+ /* default pcs_autoneg to the same setting as mac autoneg */
+ pcs_autoneg = hw->mac.autoneg;
+
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* sgmii mode lets the phy handle forcing speed/duplex */
+ pcs_autoneg = true;
+ /* autoneg time out should be disabled for SGMII mode */
+ reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ /* disable PCS autoneg and support parallel detect only */
+ pcs_autoneg = false;
+ default:
+ if (hw->mac.type == e1000_82575 ||
+ hw->mac.type == e1000_82576) {
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+ if (ret_val) {
+ hw_dbg(KERN_DEBUG "NVM Read Error\n\n");
+ return ret_val;
+ }
+
+ if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+ pcs_autoneg = false;
+ }
+
+ /* non-SGMII modes only supports a speed of 1000/Full for the
+ * link so it is best to just force the MAC and let the pcs
+ * link either autoneg or be forced to 1000/Full
+ */
+ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+ E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+ /* set speed of 1000/Full if speed/duplex is forced */
+ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+ break;
+ }
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* New SerDes mode allows for forcing speed or autonegotiating speed
+ * at 1gb. Autoneg should be default set by most drivers. This is the
+ * mode that will be compatible with older link partners and switches.
+ * However, both are supported by the hardware and some drivers/tools.
+ */
+ reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+ E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+ if (pcs_autoneg) {
+ /* Set PCS register for autoneg */
+ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+
+ /* Disable force flow control for autoneg */
+ reg &= ~E1000_PCS_LCTL_FORCE_FCTRL;
+
+ /* Configure flow control advertisement for autoneg */
+ anadv_reg = rd32(E1000_PCS_ANADV);
+ anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE);
+ switch (hw->fc.requested_mode) {
+ case e1000_fc_full:
+ case e1000_fc_rx_pause:
+ anadv_reg |= E1000_TXCW_ASM_DIR;
+ anadv_reg |= E1000_TXCW_PAUSE;
+ break;
+ case e1000_fc_tx_pause:
+ anadv_reg |= E1000_TXCW_ASM_DIR;
+ break;
+ default:
+ break;
+ }
+ wr32(E1000_PCS_ANADV, anadv_reg);
+
+ hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
+ } else {
+ /* Set PCS register for forced link */
+ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
+
+ /* Force flow control for forced link */
+ reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
+ }
+
+ wr32(E1000_PCS_LCTL, reg);
+
+ if (!pcs_autoneg && !igb_sgmii_active_82575(hw))
+ igb_force_mac_fc(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_sgmii_active_82575 - Return sgmii state
+ * @hw: pointer to the HW structure
+ *
+ * 82575 silicon has a serialized gigabit media independent interface (sgmii)
+ * which can be enabled for use in the embedded applications. Simply
+ * return the current state of the sgmii interface.
+ **/
+static bool igb_sgmii_active_82575(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ return dev_spec->sgmii_active;
+}
+
+/**
+ * igb_reset_init_script_82575 - Inits HW defaults after reset
+ * @hw: pointer to the HW structure
+ *
+ * Inits recommended HW defaults after a reset when there is no EEPROM
+ * detected. This is only for the 82575.
+ **/
+static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
+{
+ if (hw->mac.type == e1000_82575) {
+ hw_dbg("Running reset init script for 82575\n");
+ /* SerDes configuration via SERDESCTRL */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
+
+ /* CCM configuration via CCMCTL register */
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
+
+ /* PCIe lanes configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+ /* PCIe PLL Configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_mac_addr_82575 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = igb_check_alt_mac_addr(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_mac_addr(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+ igb_power_down_phy_copper(hw);
+}
+
+/**
+ * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+ igb_clear_hw_cntrs_base(hw);
+
+ rd32(E1000_PRC64);
+ rd32(E1000_PRC127);
+ rd32(E1000_PRC255);
+ rd32(E1000_PRC511);
+ rd32(E1000_PRC1023);
+ rd32(E1000_PRC1522);
+ rd32(E1000_PTC64);
+ rd32(E1000_PTC127);
+ rd32(E1000_PTC255);
+ rd32(E1000_PTC511);
+ rd32(E1000_PTC1023);
+ rd32(E1000_PTC1522);
+
+ rd32(E1000_ALGNERRC);
+ rd32(E1000_RXERRC);
+ rd32(E1000_TNCRS);
+ rd32(E1000_CEXTERR);
+ rd32(E1000_TSCTC);
+ rd32(E1000_TSCTFC);
+
+ rd32(E1000_MGTPRC);
+ rd32(E1000_MGTPDC);
+ rd32(E1000_MGTPTC);
+
+ rd32(E1000_IAC);
+ rd32(E1000_ICRXOC);
+
+ rd32(E1000_ICRXPTC);
+ rd32(E1000_ICRXATC);
+ rd32(E1000_ICTXPTC);
+ rd32(E1000_ICTXATC);
+ rd32(E1000_ICTXQEC);
+ rd32(E1000_ICTXQMTC);
+ rd32(E1000_ICRXDMTC);
+
+ rd32(E1000_CBTMPC);
+ rd32(E1000_HTDPMC);
+ rd32(E1000_CBRMPC);
+ rd32(E1000_RPTHC);
+ rd32(E1000_HGPTC);
+ rd32(E1000_HTCBDPC);
+ rd32(E1000_HGORCL);
+ rd32(E1000_HGORCH);
+ rd32(E1000_HGOTCL);
+ rd32(E1000_HGOTCH);
+ rd32(E1000_LENERRS);
+
+ /* This register should not be read in copper configurations */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+ igb_sgmii_active_82575(hw))
+ rd32(E1000_SCVPC);
+}
+
+/**
+ * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
+ * @hw: pointer to the HW structure
+ *
+ * After rx enable if managability is enabled then there is likely some
+ * bad data at the start of the fifo and possibly in the DMA fifo. This
+ * function clears the fifos and flushes any packets that came in as rx was
+ * being enabled.
+ **/
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+ u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+ int i, ms_wait;
+
+ if (hw->mac.type != e1000_82575 ||
+ !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+ return;
+
+ /* Disable all RX queues */
+ for (i = 0; i < 4; i++) {
+ rxdctl[i] = rd32(E1000_RXDCTL(i));
+ wr32(E1000_RXDCTL(i),
+ rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+ }
+ /* Poll all queues to verify they have shut down */
+ for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+ usleep_range(1000, 2000);
+ rx_enabled = 0;
+ for (i = 0; i < 4; i++)
+ rx_enabled |= rd32(E1000_RXDCTL(i));
+ if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+ break;
+ }
+
+ if (ms_wait == 10)
+ hw_dbg("Queue disable timed out after 10ms\n");
+
+ /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+ * incoming packets are rejected. Set enable and wait 2ms so that
+ * any packet that was coming in as RCTL.EN was set is flushed
+ */
+ rfctl = rd32(E1000_RFCTL);
+ wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+ rlpml = rd32(E1000_RLPML);
+ wr32(E1000_RLPML, 0);
+
+ rctl = rd32(E1000_RCTL);
+ temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+ temp_rctl |= E1000_RCTL_LPE;
+
+ wr32(E1000_RCTL, temp_rctl);
+ wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+ wrfl();
+ usleep_range(2000, 3000);
+
+ /* Enable RX queues that were previously enabled and restore our
+ * previous state
+ */
+ for (i = 0; i < 4; i++)
+ wr32(E1000_RXDCTL(i), rxdctl[i]);
+ wr32(E1000_RCTL, rctl);
+ wrfl();
+
+ wr32(E1000_RLPML, rlpml);
+ wr32(E1000_RFCTL, rfctl);
+
+ /* Flush receive errors generated by workaround */
+ rd32(E1000_ROC);
+ rd32(E1000_RNBC);
+ rd32(E1000_MPC);
+}
+
+/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /* if capabilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /* for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
+ * igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ * @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ * enables/disables L2 switch anti-spoofing functionality.
+ **/
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+ u32 reg_val, reg_offset;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ reg_offset = E1000_DTXSWC;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ reg_offset = E1000_TXSWC;
+ break;
+ default:
+ return;
+ }
+
+ reg_val = rd32(reg_offset);
+ if (enable) {
+ reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs
+ */
+ reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ }
+ wr32(reg_offset, reg_val);
+}
+
+/**
+ * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables L2 switch loopback functionality.
+ **/
+void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 dtxswc;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ dtxswc = rd32(E1000_DTXSWC);
+ if (enable)
+ dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ else
+ dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ wr32(E1000_DTXSWC, dtxswc);
+ break;
+ case e1000_i354:
+ case e1000_i350:
+ dtxswc = rd32(E1000_TXSWC);
+ if (enable)
+ dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ else
+ dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ wr32(E1000_TXSWC, dtxswc);
+ break;
+ default:
+ /* Currently no other hardware supports loopback */
+ break;
+ }
+
+}
+
+/**
+ * igb_vmdq_set_replication_pf - enable or disable vmdq replication
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables replication of packets across multiple pools.
+ **/
+void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 vt_ctl = rd32(E1000_VT_CTL);
+
+ if (enable)
+ vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
+ else
+ vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
+
+ wr32(E1000_VT_CTL, vt_ctl);
+}
+
+/**
+ * igb_read_phy_reg_82580 - Read 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_82580 - Write 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
+ * @hw: pointer to the HW structure
+ *
+ * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * the values found in the EEPROM. This addresses an issue in which these
+ * bits are not restored from EEPROM after reset.
+ **/
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 mdicnfg;
+ u16 nvm_data = 0;
+
+ if (hw->mac.type != e1000_82580)
+ goto out;
+ if (!igb_sgmii_active_82575(hw))
+ goto out;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ mdicnfg = rd32(E1000_MDICNFG);
+ if (nvm_data & NVM_WORD24_EXT_MDIO)
+ mdicnfg |= E1000_MDICNFG_EXT_MDIO;
+ if (nvm_data & NVM_WORD24_COM_MDIO)
+ mdicnfg |= E1000_MDICNFG_COM_MDIO;
+ wr32(E1000_MDICNFG, mdicnfg);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_hw_82580 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets function or entire device (all ports, etc.)
+ * to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ /* BH SW mailbox bit in SW_FW_SYNC */
+ u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+ u32 ctrl;
+ bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+ hw->dev_spec._82575.global_device_reset = false;
+
+ /* due to hw errata, global device reset doesn't always
+ * work on 82580
+ */
+ if (hw->mac.type == e1000_82580)
+ global_device_reset = false;
+
+ /* Get current control state. */
+ ctrl = rd32(E1000_CTRL);
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 11000);
+
+ /* Determine whether or not a global dev reset is requested */
+ if (global_device_reset &&
+ hw->mac.ops.acquire_swfw_sync(hw, swmbsw_mask))
+ global_device_reset = false;
+
+ if (global_device_reset &&
+ !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+ ctrl |= E1000_CTRL_DEV_RST;
+ else
+ ctrl |= E1000_CTRL_RST;
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ /* Add delay to insure DEV_RST has time to complete */
+ if (global_device_reset)
+ usleep_range(5000, 6000);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* clear global device reset status bit */
+ wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ rd32(E1000_ICR);
+
+ ret_val = igb_reset_mdicnfg_82580(hw);
+ if (ret_val)
+ hw_dbg("Could not reset MDICNFG based on EEPROM\n");
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ /* Release semaphore */
+ if (global_device_reset)
+ hw->mac.ops.release_swfw_sync(hw, swmbsw_mask);
+
+ return ret_val;
+}
+
+/**
+ * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ * @data: data received by reading RXPBS register
+ *
+ * The 82580 uses a table based approach for packet buffer allocation sizes.
+ * This function converts the retrieved value into the correct table value
+ * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ * 0x0 36 72 144 1 2 4 8 16
+ * 0x8 35 70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+ u16 ret_val = 0;
+
+ if (data < ARRAY_SIZE(e1000_82580_rxpbs_table))
+ ret_val = e1000_82580_rxpbs_table[data];
+
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_with_offset - Validate EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+ u16 offset)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_with_offset - Update EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
+ &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 eeprom_regions_count = 1;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
+ /* if checksums compatibility bit is set validate checksums
+ * for all 4 ports.
+ */
+ eeprom_regions_count = 4;
+ }
+
+ for (j = 0; j < eeprom_regions_count; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_82580 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum compatibility bit.\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
+ /* set compatibility bit to validate checksums appropriately */
+ nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
+ ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Write Error while updating checksum compatibility bit.\n");
+ goto out;
+ }
+ }
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_i350 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * __igb_access_emi_reg - Read/write EMI register
+ * @hw: pointer to the HW structure
+ * @addr: EMI address to program
+ * @data: pointer to value to read/write from/to the EMI address
+ * @read: boolean flag to indicate read or write
+ **/
+static s32 __igb_access_emi_reg(struct e1000_hw *hw, u16 address,
+ u16 *data, bool read)
+{
+ s32 ret_val = 0;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address);
+ if (ret_val)
+ return ret_val;
+
+ if (read)
+ ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data);
+ else
+ ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data);
+
+ return ret_val;
+}
+
+/**
+ * igb_read_emi_reg - Read Extended Management Interface register
+ * @hw: pointer to the HW structure
+ * @addr: EMI address to program
+ * @data: value to be read from the EMI address
+ **/
+s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
+{
+ return __igb_access_emi_reg(hw, addr, data, true);
+}
+
+/**
+ * igb_set_eee_i350 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @adv1G: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
+ *
+ * Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M)
+{
+ u32 ipcnfg, eeer;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ goto out;
+ ipcnfg = rd32(E1000_IPCNFG);
+ eeer = rd32(E1000_EEER);
+
+ /* enable or disable per user setting */
+ if (!(hw->dev_spec._82575.eee_disable)) {
+ u32 eee_su = rd32(E1000_EEE_SU);
+
+ if (adv100M)
+ ipcnfg |= E1000_IPCNFG_EEE_100M_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN;
+
+ if (adv1G)
+ ipcnfg |= E1000_IPCNFG_EEE_1G_AN;
+ else
+ ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN;
+
+ eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+
+ /* This bit should not be set in normal operation. */
+ if (eee_su & E1000_EEE_SU_LPI_CLK_STP)
+ hw_dbg("LPI Clock Stop Bit should not be set!\n");
+
+ } else {
+ ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
+ E1000_IPCNFG_EEE_100M_AN);
+ eeer &= ~(E1000_EEER_TX_LPI_EN |
+ E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+ }
+ wr32(E1000_IPCNFG, ipcnfg);
+ wr32(E1000_EEER, eeer);
+ rd32(E1000_IPCNFG);
+ rd32(E1000_EEER);
+out:
+
+ return 0;
+}
+
+/**
+ * igb_set_eee_i354 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @adv1G: boolean flag enabling 1G EEE advertisement
+ * @adv100m: boolean flag enabling 100M EEE advertisement
+ *
+ * Enable/disable EEE legacy mode based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data;
+
+ if ((hw->phy.media_type != e1000_media_type_copper) ||
+ (phy->id != M88E1543_E_PHY_ID))
+ goto out;
+
+ if (!hw->dev_spec._82575.eee_disable) {
+ /* Switch to PHY page 18. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= E1000_M88E1543_EEE_CTRL_1_MS;
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Return the PHY to page 0. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+ if (ret_val)
+ goto out;
+
+ /* Turn on EEE advertisement. */
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ if (adv100M)
+ phy_data |= E1000_EEE_ADV_100_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_100_SUPPORTED;
+
+ if (adv1G)
+ phy_data |= E1000_EEE_ADV_1000_SUPPORTED;
+ else
+ phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED;
+
+ ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ phy_data);
+ } else {
+ /* Turn off EEE advertisement. */
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED |
+ E1000_EEE_ADV_1000_SUPPORTED);
+ ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
+ E1000_EEE_ADV_DEV_I354,
+ phy_data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_eee_status_i354 - Get EEE status
+ * @hw: pointer to the HW structure
+ * @status: EEE status
+ *
+ * Get EEE status by guessing based on whether Tx or Rx LPI indications have
+ * been received.
+ **/
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data;
+
+ /* Check if EEE is supported on this device. */
+ if ((hw->phy.media_type != e1000_media_type_copper) ||
+ (phy->id != M88E1543_E_PHY_ID))
+ goto out;
+
+ ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
+ E1000_PCS_STATUS_DEV_I354,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD |
+ E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false;
+
+out:
+ return ret_val;
+}
+
+static const u8 e1000_emc_temp_data[4] = {
+ E1000_EMC_INTERNAL_DATA,
+ E1000_EMC_DIODE1_DATA,
+ E1000_EMC_DIODE2_DATA,
+ E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+ E1000_EMC_INTERNAL_THERM_LIMIT,
+ E1000_EMC_DIODE1_THERM_LIMIT,
+ E1000_EMC_DIODE2_THERM_LIMIT,
+ E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+#ifdef CONFIG_IGB_HWMON
+/**
+ * igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ **/
+static s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return 0;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > E1000_MAX_SENSORS)
+ num_sensors = E1000_MAX_SENSORS;
+
+ for (i = 1; i < num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0)
+ hw->phy.ops.read_i2c_byte(hw,
+ e1000_emc_temp_data[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ }
+ return 0;
+}
+
+/**
+ * igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Sets the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+static s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+ data->sensor[0].location = 0x1;
+ data->sensor[0].caution_thresh =
+ (rd32(E1000_THHIGHTC) & 0xFF);
+ data->sensor[0].max_op_thresh =
+ (rd32(E1000_THLOWTC) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return 0;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+ NVM_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+ for (i = 1; i <= num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ e1000_emc_therm_limit[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ therm_limit);
+
+ if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return 0;
+}
+
+#endif
+static struct e1000_mac_operations e1000_mac_ops_82575 = {
+ .init_hw = igb_init_hw_82575,
+ .check_for_link = igb_check_for_link_82575,
+ .rar_set = igb_rar_set,
+ .read_mac_addr = igb_read_mac_addr_82575,
+ .get_speed_and_duplex = igb_get_link_up_info_82575,
+#ifdef CONFIG_IGB_HWMON
+ .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+ .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
+};
+
+static struct e1000_phy_operations e1000_phy_ops_82575 = {
+ .acquire = igb_acquire_phy_82575,
+ .get_cfg_done = igb_get_cfg_done_82575,
+ .release = igb_release_phy_82575,
+ .write_i2c_byte = igb_write_i2c_byte,
+ .read_i2c_byte = igb_read_i2c_byte,
+};
+
+static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
+ .acquire = igb_acquire_nvm_82575,
+ .read = igb_read_nvm_eerd,
+ .release = igb_release_nvm_82575,
+ .write = igb_write_nvm_spi,
+};
+
+const struct e1000_info e1000_82575_info = {
+ .get_invariants = igb_get_invariants_82575,
+ .mac_ops = &e1000_mac_ops_82575,
+ .phy_ops = &e1000_phy_ops_82575,
+ .nvm_ops = &e1000_nvm_ops_82575,
+};
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_82575-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,279 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 *data);
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr,
+ u8 data);
+
+#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
+#define E1000_RAR_ENTRIES_82575 16
+#define E1000_RAR_ENTRIES_82576 24
+#define E1000_RAR_ENTRIES_82580 24
+#define E1000_RAR_ENTRIES_I350 32
+
+#define E1000_SW_SYNCH_MB 0x00000100
+#define E1000_STAT_DEV_RST_SET 0x00100000
+#define E1000_CTRL_DEV_RST 0x20000000
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+#define E1000_SRRCTL_TIMESTAMP 0x40000000
+
+
+#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
+#define E1000_MRQC_ENABLE_VMDQ 0x00000003
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
+
+#define E1000_EICR_TX_QUEUE ( \
+ E1000_EICR_TX_QUEUE0 | \
+ E1000_EICR_TX_QUEUE1 | \
+ E1000_EICR_TX_QUEUE2 | \
+ E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+ E1000_EICR_RX_QUEUE0 | \
+ E1000_EICR_RX_QUEUE1 | \
+ E1000_EICR_RX_QUEUE2 | \
+ E1000_EICR_RX_QUEUE3)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ struct {
+ __le16 pkt_info; /* RSS type, Packet type */
+ __le16 hdr_info; /* Split Head, buf len */
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+/* Adv ctxt IPSec ESP len mask */
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
+#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
+
+/* Additional DCA related definitions, note change in position of CPUID */
+#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
+#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
+#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
+#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE (1 << 26)
+#define E1000_ETQF_1588 (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP 0x00008000
+#define E1000_FTQF_1588_TIME_STAMP 0x08000000
+#define E1000_FTQF_MASK 0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP 0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575 0x0400
+#define MAX_NUM_VFS 8
+
+#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
+#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC (1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN (1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
+#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */
+
+#define E1000_DVMOLR_HIDEVLAN 0x20000000 /* Hide vlan enable */
+#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
+#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */
+
+#define E1000_VLVF_ARRAY_SIZE 32
+#define E1000_VLVF_VLANID_MASK 0x00000FFF
+#define E1000_VLVF_POOLSEL_SHIFT 12
+#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT)
+#define E1000_VLVF_LVLAN 0x00100000
+#define E1000_VLVF_VLANID_ENABLE 0x80000000
+
+#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
+
+#define E1000_IOVCTL 0x05BBC
+#define E1000_IOVCTL_REUSE_VFQ 0x00000001
+
+#define E1000_RPLOLR_STRVLAN 0x40000000
+#define E1000_RPLOLR_STRCRC 0x80000000
+
+#define E1000_DTXCTL_8023LL 0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN 0x0020
+#define E1000_DTXCTL_SPOOF_INT 0x0040
+
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14)
+
+#define ALL_QUEUES 0xFFFF
+
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
+void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
+void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
+u16 igb_rxpbs_adjust_82580(u32 data);
+s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data);
+s32 igb_set_eee_i350(struct e1000_hw *, bool adv1G, bool adv100M);
+s32 igb_set_eee_i354(struct e1000_hw *, bool adv1G, bool adv100M);
+s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status);
+
+#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define E1000_EMC_INTERNAL_DATA 0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20
+#define E1000_EMC_DIODE1_DATA 0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT 0x19
+#define E1000_EMC_DIODE2_DATA 0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A
+#define E1000_EMC_DIODE3_DATA 0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT 0x30
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_defines-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,1016 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
+#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */
+#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */
+
+/* Physical Func Reset Done Indication */
+#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+/* Interrupt delay cancellation */
+/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
+/* Interrupt acknowledge Auto-mask */
+/* Clear Interrupt timers after IMS clear */
+/* packet buffer parity error detection enabled */
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a))
+#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a))
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
+#define E1000_IVAR_VALID 0x80
+#define E1000_GPIE_NSICR 0x00000001
+#define E1000_GPIE_MSIX_MODE 0x00000010
+#define E1000_GPIE_EIAME 0x40000000
+#define E1000_GPIE_PBA 0x80000000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_TS 0x10000 /* Pkt was time stamped */
+
+#define E1000_RXDEXT_STATERR_LB 0x00040000
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_EN_BMC2OS 0x10000000 /* OSBMC is Enabled or not */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+
+/* Receive Control */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_DPF 0x00400000 /* Discard Pause Frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x1
+#define E1000_SWFW_PHY0_SM 0x2
+#define E1000_SWFW_PHY1_SM 0x4
+#define E1000_SWFW_PHY2_SM 0x20
+#define E1000_SWFW_PHY3_SM 0x40
+
+/* FACTPS Definitions */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+/* Reset both PHY ports, through PHYRST_N pin */
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
+#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+/* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_CONNSW_PHYSD 0x400
+#define E1000_CONNSW_PHY_PDN 0x800
+#define E1000_CONNSW_SERDESD 0x200
+#define E1000_CONNSW_AUTOSENSE_CONF 0x2
+#define E1000_CONNSW_AUTOSENSE_EN 0x1
+#define E1000_PCS_CFG_PCS_EN 8
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+/* Change in Dock/Undock state. Clear on write '0'. */
+/* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
+/* BMC external code execution disabled */
+
+#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */
+#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */
+/* Constants used to intrepret the masked PCI-X bus speed. */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+
+/* DMA Coalescing register fields */
+#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coal Watchdog Timer */
+#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coal Rx Threshold */
+#define E1000_DMACR_DMACTHR_SHIFT 16
+#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe trans */
+#define E1000_DMACR_DMAC_LX_SHIFT 28
+#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */
+/* DMA Coalescing BMC-to-OS Watchdog Enable */
+#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000
+
+#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coal Tx Threshold */
+
+#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */
+
+#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Rx Traffic Rate Thresh */
+#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rx pkt rate curr window */
+
+#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rx Current Cnt */
+
+#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* FC Rx Thresh High val */
+#define E1000_FCRTC_RTH_COAL_SHIFT 4
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */
+
+/* Timestamp in Rx buffer */
+#define E1000_RXPBS_CFG_TS_EN 0x80000000
+
+#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
+#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_LEF 0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* PBA constants */
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_64K 0x0040 /* 64KB */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
+#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */
+#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC | \
+ E1000_IMS_DOUTSYNC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */
+#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */
+
+/* Extended Interrupt Cause Set */
+/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
+#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */
+
+
+/* Transmit Descriptor Control */
+/* Enable the counting of descriptors still to be processed. */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* Transmit Config Word */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX 15
+#define E1000_ERR_INVALID_ARGUMENT 16
+#define E1000_ERR_NO_SPACE 17
+#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_INVM_VALUE_NOT_FOUND 19
+#define E1000_ERR_I2C 20
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
+/* Time Sync Interrupt Cause/Mask Register Bits */
+
+#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */
+#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */
+#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */
+#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */
+
+#define TSYNC_INTERRUPTS TSINTR_TXTS
+#define E1000_TSICR_TXTS TSINTR_TXTS
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */
+#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */
+#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */
+#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */
+#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */
+#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */
+#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */
+#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */
+#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */
+#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */
+#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */
+#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */
+#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */
+#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */
+
+#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */
+#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */
+#define E1000_MDICNFG_PHY_MASK 0x03E00000
+#define E1000_MDICNFG_PHY_SHIFT 21
+
+#define E1000_MEDIA_PORT_COPPER 1
+#define E1000_MEDIA_PORT_OTHER 2
+#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2
+#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3
+#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */
+#define E1000_M88E1112_MAC_CTRL_1 0x10
+#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */
+#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7
+#define E1000_M88E1112_PAGE_ADDR 0x16
+#define E1000_M88E1112_STATUS 0x01
+
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
+/* mPHY Address Control and Data Registers */
+#define E1000_MPHY_ADDR_CTL 0x0024 /* mPHY Address Control Register */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
+#define E1000_MPHY_DATA 0x0E10 /* mPHY Data Register */
+
+/* mPHY PCS CLK Register */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 /* mPHY PCS CLK AFE CSR Offset */
+/* mPHY Near End Digital Loopback Override Bit */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
+
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LSTS_AN_COMPLETE 0x10000
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */
+/* Secure FLASH mode requires removing MSb */
+#define E1000_I210_FW_PTR_MASK 0x7FFF
+/* Firmware code revision field word offset*/
+#define E1000_I210_FW_VER_OFFSET 328
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+
+
+/* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+
+/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */
+#define NVM_VERSION 0x0005
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+#define NVM_COMPATIBILITY_REG_3 0x0003
+#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+#define NVM_MAC_ADDR 0x0000
+#define NVM_SUB_DEV_ID 0x000B
+#define NVM_SUB_VEN_ID 0x000C
+#define NVM_DEV_ID 0x000D
+#define NVM_VEN_ID 0x000E
+#define NVM_INIT_CTRL_2 0x000F
+#define NVM_INIT_CTRL_4 0x0013
+#define NVM_LED_1_CFG 0x001C
+#define NVM_LED_0_2_CFG 0x001F
+#define NVM_ETRACK_WORD 0x0042
+#define NVM_ETRACK_HIWORD 0x0043
+#define NVM_COMB_VER_OFF 0x0083
+#define NVM_COMB_VER_PTR 0x003d
+
+/* NVM version defines */
+#define NVM_MAJOR_MASK 0xF000
+#define NVM_MINOR_MASK 0x0FF0
+#define NVM_IMAGE_ID_MASK 0x000F
+#define NVM_COMB_VER_MASK 0x00FF
+#define NVM_MAJOR_SHIFT 12
+#define NVM_MINOR_SHIFT 4
+#define NVM_COMB_VER_SHFT 8
+#define NVM_VER_INVALID 0xFFFF
+#define NVM_ETRACK_SHIFT 16
+#define NVM_ETRACK_VALID 0x8000
+#define NVM_NEW_DEC_MASK 0x0F00
+#define NVM_HEX_CONV 16
+#define NVM_HEX_TENS 10
+
+#define NVM_ETS_CFG 0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT 6
+#define NVM_ETS_TYPE_MASK 0x0038
+#define NVM_ETS_TYPE_SHIFT 3
+#define NVM_ETS_TYPE_EMC 0x000
+#define NVM_ETS_NUM_SENSORS_MASK 0x0007
+#define NVM_ETS_DATA_LOC_MASK 0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT 10
+#define NVM_ETS_DATA_INDEX_MASK 0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT 8
+#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed external */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_ASM_DIR 0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+
+/* length of string needed to store part num */
+#define E1000_PBANUM_LENGTH 11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_RESERVED_WORD 0xFFFF
+#define NVM_PBA_PTR_GUARD 0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+
+/* NVM Commands - Microwire */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCIE_DEVICE_CONTROL2 0x28
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define M88E1112_E_PHY_ID 0x01410C90
+#define I347AT4_E_PHY_ID 0x01410DC0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define I82580_I_PHY_ID 0x015403A0
+#define I350_I_PHY_ID 0x015403B0
+#define M88_VENDOR 0x0141
+#define I210_I_PHY_ID 0x01410C00
+#define M88E1543_E_PHY_ID 0x01410EA0
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/* 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+/* 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+
+/* Intel i347-AT4 Registers */
+
+#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT 0x16
+
+/* i347-AT4 Extended PHY Specific Control Register */
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000
+
+/* i347-AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
+
+/* Marvell 1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE 0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+#define E1000_MDIC_DEST 0x80000000
+
+/* Thermal Sensor */
+#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */
+#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Speed Throttle Event */
+
+/* Energy Efficient Ethernet */
+#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* EEE Enable 1G AN */
+#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
+#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
+#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
+#define E1000_EEER_FRC_AN 0x10000000 /* Enable EEE in loopback */
+#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
+#define E1000_EEE_SU_LPI_CLK_STP 0X00800000 /* EEE LPI Clock Stop */
+#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */
+#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */
+#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */
+#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */
+#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */
+#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */
+#define E1000_M88E1543_EEE_CTRL_1 0x0
+#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */
+#define E1000_EEE_ADV_DEV_I354 7
+#define E1000_EEE_ADV_ADDR_I354 60
+#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */
+#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */
+#define E1000_PCS_STATUS_DEV_I354 3
+#define E1000_PCS_STATUS_ADDR_I354 1
+#define E1000_PCS_STATUS_TX_LPI_IND 0x0200 /* Tx in LPI state */
+#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400
+#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#define E1000_VFTA_ENTRY_SHIFT 5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+/* DMA Coalescing register fields */
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power on DMA coal */
+
+/* Tx Rate-Scheduler Config fields */
+#define E1000_RTTBCNRC_RS_ENA 0x80000000
+#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF
+#define E1000_RTTBCNRC_RF_INT_SHIFT 14
+#define E1000_RTTBCNRC_RF_INT_MASK \
+ (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_defines-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,1016 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP2_DATA 0x00000040 /* Value of SW Defineable Pin 2 */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
+#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */
+#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */
+
+/* Physical Func Reset Done Indication */
+#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+/* Interrupt delay cancellation */
+/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
+/* Interrupt acknowledge Auto-mask */
+/* Clear Interrupt timers after IMS clear */
+/* packet buffer parity error detection enabled */
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a))
+#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a))
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
+#define E1000_IVAR_VALID 0x80
+#define E1000_GPIE_NSICR 0x00000001
+#define E1000_GPIE_MSIX_MODE 0x00000010
+#define E1000_GPIE_EIAME 0x40000000
+#define E1000_GPIE_PBA 0x80000000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_TS 0x10000 /* Pkt was time stamped */
+
+#define E1000_RXDEXT_STATERR_LB 0x00040000
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_EN_BMC2OS 0x10000000 /* OSBMC is Enabled or not */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+
+/* Receive Control */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_DPF 0x00400000 /* Discard Pause Frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x1
+#define E1000_SWFW_PHY0_SM 0x2
+#define E1000_SWFW_PHY1_SM 0x4
+#define E1000_SWFW_PHY2_SM 0x20
+#define E1000_SWFW_PHY3_SM 0x40
+
+/* FACTPS Definitions */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+/* Reset both PHY ports, through PHYRST_N pin */
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
+#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+/* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_CONNSW_PHYSD 0x400
+#define E1000_CONNSW_PHY_PDN 0x800
+#define E1000_CONNSW_SERDESD 0x200
+#define E1000_CONNSW_AUTOSENSE_CONF 0x2
+#define E1000_CONNSW_AUTOSENSE_EN 0x1
+#define E1000_PCS_CFG_PCS_EN 8
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+/* Change in Dock/Undock state. Clear on write '0'. */
+/* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
+/* BMC external code execution disabled */
+
+#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */
+#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */
+/* Constants used to intrepret the masked PCI-X bus speed. */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+
+/* DMA Coalescing register fields */
+#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coal Watchdog Timer */
+#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coal Rx Threshold */
+#define E1000_DMACR_DMACTHR_SHIFT 16
+#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe trans */
+#define E1000_DMACR_DMAC_LX_SHIFT 28
+#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */
+/* DMA Coalescing BMC-to-OS Watchdog Enable */
+#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000
+
+#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coal Tx Threshold */
+
+#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */
+
+#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Rx Traffic Rate Thresh */
+#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rx pkt rate curr window */
+
+#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rx Current Cnt */
+
+#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* FC Rx Thresh High val */
+#define E1000_FCRTC_RTH_COAL_SHIFT 4
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */
+
+/* Timestamp in Rx buffer */
+#define E1000_RXPBS_CFG_TS_EN 0x80000000
+
+#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
+#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_LEF 0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* PBA constants */
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_64K 0x0040 /* 64KB */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
+#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */
+#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC | \
+ E1000_IMS_DOUTSYNC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */
+#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */
+
+/* Extended Interrupt Cause Set */
+/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
+#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */
+
+
+/* Transmit Descriptor Control */
+/* Enable the counting of descriptors still to be processed. */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* Transmit Config Word */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX 15
+#define E1000_ERR_INVALID_ARGUMENT 16
+#define E1000_ERR_NO_SPACE 17
+#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_INVM_VALUE_NOT_FOUND 19
+#define E1000_ERR_I2C 20
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
+/* Time Sync Interrupt Cause/Mask Register Bits */
+
+#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */
+#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */
+#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */
+#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */
+
+#define TSYNC_INTERRUPTS TSINTR_TXTS
+#define E1000_TSICR_TXTS TSINTR_TXTS
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */
+#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */
+#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */
+#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */
+#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */
+#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */
+#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */
+#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */
+#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */
+#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */
+#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */
+#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */
+#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */
+#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */
+#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */
+
+#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */
+#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */
+#define E1000_MDICNFG_PHY_MASK 0x03E00000
+#define E1000_MDICNFG_PHY_SHIFT 21
+
+#define E1000_MEDIA_PORT_COPPER 1
+#define E1000_MEDIA_PORT_OTHER 2
+#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2
+#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3
+#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */
+#define E1000_M88E1112_MAC_CTRL_1 0x10
+#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */
+#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7
+#define E1000_M88E1112_PAGE_ADDR 0x16
+#define E1000_M88E1112_STATUS 0x01
+
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
+/* mPHY Address Control and Data Registers */
+#define E1000_MPHY_ADDR_CTL 0x0024 /* mPHY Address Control Register */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
+#define E1000_MPHY_DATA 0x0E10 /* mPHY Data Register */
+
+/* mPHY PCS CLK Register */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 /* mPHY PCS CLK AFE CSR Offset */
+/* mPHY Near End Digital Loopback Override Bit */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
+
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LSTS_AN_COMPLETE 0x10000
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */
+/* Secure FLASH mode requires removing MSb */
+#define E1000_I210_FW_PTR_MASK 0x7FFF
+/* Firmware code revision field word offset*/
+#define E1000_I210_FW_VER_OFFSET 328
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+
+
+/* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+
+/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */
+#define NVM_VERSION 0x0005
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+#define NVM_COMPATIBILITY_REG_3 0x0003
+#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+#define NVM_MAC_ADDR 0x0000
+#define NVM_SUB_DEV_ID 0x000B
+#define NVM_SUB_VEN_ID 0x000C
+#define NVM_DEV_ID 0x000D
+#define NVM_VEN_ID 0x000E
+#define NVM_INIT_CTRL_2 0x000F
+#define NVM_INIT_CTRL_4 0x0013
+#define NVM_LED_1_CFG 0x001C
+#define NVM_LED_0_2_CFG 0x001F
+#define NVM_ETRACK_WORD 0x0042
+#define NVM_ETRACK_HIWORD 0x0043
+#define NVM_COMB_VER_OFF 0x0083
+#define NVM_COMB_VER_PTR 0x003d
+
+/* NVM version defines */
+#define NVM_MAJOR_MASK 0xF000
+#define NVM_MINOR_MASK 0x0FF0
+#define NVM_IMAGE_ID_MASK 0x000F
+#define NVM_COMB_VER_MASK 0x00FF
+#define NVM_MAJOR_SHIFT 12
+#define NVM_MINOR_SHIFT 4
+#define NVM_COMB_VER_SHFT 8
+#define NVM_VER_INVALID 0xFFFF
+#define NVM_ETRACK_SHIFT 16
+#define NVM_ETRACK_VALID 0x8000
+#define NVM_NEW_DEC_MASK 0x0F00
+#define NVM_HEX_CONV 16
+#define NVM_HEX_TENS 10
+
+#define NVM_ETS_CFG 0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT 6
+#define NVM_ETS_TYPE_MASK 0x0038
+#define NVM_ETS_TYPE_SHIFT 3
+#define NVM_ETS_TYPE_EMC 0x000
+#define NVM_ETS_NUM_SENSORS_MASK 0x0007
+#define NVM_ETS_DATA_LOC_MASK 0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT 10
+#define NVM_ETS_DATA_INDEX_MASK 0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT 8
+#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed external */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_ASM_DIR 0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+
+/* length of string needed to store part num */
+#define E1000_PBANUM_LENGTH 11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_RESERVED_WORD 0xFFFF
+#define NVM_PBA_PTR_GUARD 0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+
+/* NVM Commands - Microwire */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCIE_DEVICE_CONTROL2 0x28
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define M88E1112_E_PHY_ID 0x01410C90
+#define I347AT4_E_PHY_ID 0x01410DC0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define I82580_I_PHY_ID 0x015403A0
+#define I350_I_PHY_ID 0x015403B0
+#define M88_VENDOR 0x0141
+#define I210_I_PHY_ID 0x01410C00
+#define M88E1543_E_PHY_ID 0x01410EA0
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/* 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+/* 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+
+/* Intel i347-AT4 Registers */
+
+#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT 0x16
+
+/* i347-AT4 Extended PHY Specific Control Register */
+
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000
+
+/* i347-AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
+
+/* Marvell 1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE 0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+#define E1000_MDIC_DEST 0x80000000
+
+/* Thermal Sensor */
+#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */
+#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Speed Throttle Event */
+
+/* Energy Efficient Ethernet */
+#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* EEE Enable 1G AN */
+#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
+#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
+#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
+#define E1000_EEER_FRC_AN 0x10000000 /* Enable EEE in loopback */
+#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
+#define E1000_EEE_SU_LPI_CLK_STP 0X00800000 /* EEE LPI Clock Stop */
+#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */
+#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */
+#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */
+#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */
+#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */
+#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */
+#define E1000_M88E1543_EEE_CTRL_1 0x0
+#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */
+#define E1000_EEE_ADV_DEV_I354 7
+#define E1000_EEE_ADV_ADDR_I354 60
+#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */
+#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */
+#define E1000_PCS_STATUS_DEV_I354 3
+#define E1000_PCS_STATUS_ADDR_I354 1
+#define E1000_PCS_STATUS_TX_LPI_IND 0x0200 /* Tx in LPI state */
+#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400
+#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#define E1000_VFTA_ENTRY_SHIFT 5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+/* DMA Coalescing register fields */
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power on DMA coal */
+
+/* Tx Rate-Scheduler Config fields */
+#define E1000_RTTBCNRC_RS_ENA 0x80000000
+#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF
+#define E1000_RTTBCNRC_RF_INT_SHIFT 14
+#define E1000_RTTBCNRC_RF_INT_MASK \
+ (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_hw-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,568 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+#include "e1000_regs-3.18-ethercat.h"
+#include "e1000_defines-3.18-ethercat.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576 0x10C9
+#define E1000_DEV_ID_82576_FIBER 0x10E6
+#define E1000_DEV_ID_82576_SERDES 0x10E7
+#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
+#define E1000_DEV_ID_82576_NS 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES 0x1518
+#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
+#define E1000_DEV_ID_82575EB_COPPER 0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
+#define E1000_DEV_ID_82580_COPPER 0x150E
+#define E1000_DEV_ID_82580_FIBER 0x150F
+#define E1000_DEV_ID_82580_SERDES 0x1510
+#define E1000_DEV_ID_82580_SGMII 0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
+#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527
+#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
+#define E1000_DEV_ID_I350_COPPER 0x1521
+#define E1000_DEV_ID_I350_FIBER 0x1522
+#define E1000_DEV_ID_I350_SERDES 0x1523
+#define E1000_DEV_ID_I350_SGMII 0x1524
+#define E1000_DEV_ID_I210_COPPER 0x1533
+#define E1000_DEV_ID_I210_FIBER 0x1536
+#define E1000_DEV_ID_I210_SERDES 0x1537
+#define E1000_DEV_ID_I210_SGMII 0x1538
+#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B
+#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C
+#define E1000_DEV_ID_I211_COPPER 0x1539
+#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40
+#define E1000_DEV_ID_I354_SGMII 0x1F41
+#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45
+
+#define E1000_REVISION_2 2
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
+#define E1000_FUNC_2 2
+#define E1000_FUNC_3 3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_82575,
+ e1000_82576,
+ e1000_82580,
+ e1000_i350,
+ e1000_i354,
+ e1000_i210,
+ e1000_i211,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+ e1000_media_type_unknown = 0,
+ e1000_media_type_copper = 1,
+ e1000_media_type_fiber = 2,
+ e1000_media_type_internal_serdes = 3,
+ e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+ e1000_nvm_unknown = 0,
+ e1000_nvm_none,
+ e1000_nvm_eeprom_spi,
+ e1000_nvm_flash_hw,
+ e1000_nvm_invm,
+ e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+ e1000_nvm_override_none = 0,
+ e1000_nvm_override_spi_small,
+ e1000_nvm_override_spi_large,
+};
+
+enum e1000_phy_type {
+ e1000_phy_unknown = 0,
+ e1000_phy_none,
+ e1000_phy_m88,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_82580,
+ e1000_phy_i210,
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full,
+ e1000_fc_default = 0xFF
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 tor;
+ u64 tot;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+ u64 cbtmpc;
+ u64 htdpmc;
+ u64 cbrdpc;
+ u64 cbrmpc;
+ u64 rpthc;
+ u64 hgptc;
+ u64 htcbdpc;
+ u64 hgorc;
+ u64 hgotc;
+ u64 lenerrs;
+ u64 scvpc;
+ u64 hrmpc;
+ u64 doosync;
+ u64 o2bgptc;
+ u64 o2bspc;
+ u64 b2ospc;
+ u64 b2ogprc;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options;
+ u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH 252
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header;
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header;
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac-3.18-ethercat.h"
+#include "e1000_phy-3.18-ethercat.h"
+#include "e1000_nvm-3.18-ethercat.h"
+#include "e1000_mbx-3.18-ethercat.h"
+
+struct e1000_mac_operations {
+ s32 (*check_for_link)(struct e1000_hw *);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ bool (*check_mng_mode)(struct e1000_hw *);
+ s32 (*setup_physical_interface)(struct e1000_hw *);
+ void (*rar_set)(struct e1000_hw *, u8 *, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+ s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
+ void (*release_swfw_sync)(struct e1000_hw *, u16);
+#ifdef CONFIG_IGB_HWMON
+ s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+#endif
+
+};
+
+struct e1000_phy_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*check_polarity)(struct e1000_hw *);
+ s32 (*check_reset_block)(struct e1000_hw *);
+ s32 (*force_speed_duplex)(struct e1000_hw *);
+ s32 (*get_cfg_done)(struct e1000_hw *hw);
+ s32 (*get_cable_length)(struct e1000_hw *);
+ s32 (*get_phy_info)(struct e1000_hw *);
+ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*reset)(struct e1000_hw *);
+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
+ s32 (*write_reg)(struct e1000_hw *, u32, u16);
+ s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
+};
+
+struct e1000_nvm_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
+ s32 (*update)(struct e1000_hw *);
+ s32 (*validate)(struct e1000_hw *);
+ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
+};
+
+#define E1000_MAX_SENSORS 3
+
+struct e1000_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+ struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
+struct e1000_info {
+ s32 (*get_invariants)(struct e1000_hw *);
+ struct e1000_mac_operations *mac_ops;
+ struct e1000_phy_operations *phy_ops;
+ struct e1000_nvm_operations *nvm_ops;
+};
+
+extern const struct e1000_info e1000_82575_info;
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ u32 mc_filter_type;
+ u32 txcw;
+
+ u16 mta_reg_count;
+ u16 uta_reg_count;
+
+ /* Maximum size of the MTA register table in all supported adapters */
+ #define MAX_MTA_REG 128
+ u32 mta_shadow[MAX_MTA_REG];
+ u16 rar_entry_count;
+
+ u8 forced_speed_duplex;
+
+ bool adaptive_ifs;
+ bool arc_subsystem_valid;
+ bool asf_firmware_present;
+ bool autoneg;
+ bool autoneg_failed;
+ bool disable_hw_init_bits;
+ bool get_link_status;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool report_tx_early;
+ bool serdes_has_link;
+ bool tx_pkt_filtering;
+ struct e1000_thermal_sensor_data thermal_sensor_data;
+};
+
+struct e1000_phy_info {
+ struct e1000_phy_operations ops;
+
+ enum e1000_phy_type type;
+
+ enum e1000_1000t_rx_status local_rx;
+ enum e1000_1000t_rx_status remote_rx;
+ enum e1000_ms_type ms_type;
+ enum e1000_ms_type original_ms_type;
+ enum e1000_rev_polarity cable_polarity;
+ enum e1000_smart_speed smart_speed;
+
+ u32 addr;
+ u32 id;
+ u32 reset_delay_us; /* in usec */
+ u32 revision;
+
+ enum e1000_media_type media_type;
+
+ u16 autoneg_advertised;
+ u16 autoneg_mask;
+ u16 cable_length;
+ u16 max_cable_length;
+ u16 min_cable_length;
+
+ u8 mdix;
+
+ bool disable_polarity_correction;
+ bool is_mdix;
+ bool polarity_correction;
+ bool reset_disable;
+ bool speed_downgraded;
+ bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+ struct e1000_nvm_operations ops;
+ enum e1000_nvm_type type;
+ enum e1000_nvm_override override;
+
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+
+ u16 word_size;
+ u16 delay_usec;
+ u16 address_bits;
+ u16 opcode_bits;
+ u16 page_size;
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
+ enum e1000_bus_width width;
+
+ u32 snoop;
+
+ u16 func;
+ u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_mode current_mode; /* Type of flow control */
+ enum e1000_fc_mode requested_mode;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct e1000_hw *, u16);
+ s32 (*check_for_ack)(struct e1000_hw *, u16);
+ s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_82575 {
+ bool sgmii_active;
+ bool global_device_reset;
+ bool eee_disable;
+ bool clear_semaphore_once;
+ struct e1000_sfp_flags eth_flags;
+ bool module_plugged;
+ u8 media_port;
+ bool media_changed;
+ bool mas_capable;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
+ struct e1000_mbx_info mbx;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+ union {
+ struct e1000_dev_spec_82575 _82575;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
+#define hw_dbg(format, arg...) \
+ netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
+
+/* These functions must be implemented by drivers */
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_hw-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,568 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+#include "e1000_regs.h"
+#include "e1000_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576 0x10C9
+#define E1000_DEV_ID_82576_FIBER 0x10E6
+#define E1000_DEV_ID_82576_SERDES 0x10E7
+#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
+#define E1000_DEV_ID_82576_NS 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES 0x1518
+#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
+#define E1000_DEV_ID_82575EB_COPPER 0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
+#define E1000_DEV_ID_82580_COPPER 0x150E
+#define E1000_DEV_ID_82580_FIBER 0x150F
+#define E1000_DEV_ID_82580_SERDES 0x1510
+#define E1000_DEV_ID_82580_SGMII 0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
+#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527
+#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
+#define E1000_DEV_ID_I350_COPPER 0x1521
+#define E1000_DEV_ID_I350_FIBER 0x1522
+#define E1000_DEV_ID_I350_SERDES 0x1523
+#define E1000_DEV_ID_I350_SGMII 0x1524
+#define E1000_DEV_ID_I210_COPPER 0x1533
+#define E1000_DEV_ID_I210_FIBER 0x1536
+#define E1000_DEV_ID_I210_SERDES 0x1537
+#define E1000_DEV_ID_I210_SGMII 0x1538
+#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B
+#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C
+#define E1000_DEV_ID_I211_COPPER 0x1539
+#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40
+#define E1000_DEV_ID_I354_SGMII 0x1F41
+#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45
+
+#define E1000_REVISION_2 2
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
+#define E1000_FUNC_2 2
+#define E1000_FUNC_3 3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_82575,
+ e1000_82576,
+ e1000_82580,
+ e1000_i350,
+ e1000_i354,
+ e1000_i210,
+ e1000_i211,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+ e1000_media_type_unknown = 0,
+ e1000_media_type_copper = 1,
+ e1000_media_type_fiber = 2,
+ e1000_media_type_internal_serdes = 3,
+ e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+ e1000_nvm_unknown = 0,
+ e1000_nvm_none,
+ e1000_nvm_eeprom_spi,
+ e1000_nvm_flash_hw,
+ e1000_nvm_invm,
+ e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+ e1000_nvm_override_none = 0,
+ e1000_nvm_override_spi_small,
+ e1000_nvm_override_spi_large,
+};
+
+enum e1000_phy_type {
+ e1000_phy_unknown = 0,
+ e1000_phy_none,
+ e1000_phy_m88,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_82580,
+ e1000_phy_i210,
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full,
+ e1000_fc_default = 0xFF
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 tor;
+ u64 tot;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+ u64 cbtmpc;
+ u64 htdpmc;
+ u64 cbrdpc;
+ u64 cbrmpc;
+ u64 rpthc;
+ u64 hgptc;
+ u64 htcbdpc;
+ u64 hgorc;
+ u64 hgotc;
+ u64 lenerrs;
+ u64 scvpc;
+ u64 hrmpc;
+ u64 doosync;
+ u64 o2bgptc;
+ u64 o2bspc;
+ u64 b2ospc;
+ u64 b2ogprc;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options;
+ u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH 252
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header;
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header;
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_mbx.h"
+
+struct e1000_mac_operations {
+ s32 (*check_for_link)(struct e1000_hw *);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ bool (*check_mng_mode)(struct e1000_hw *);
+ s32 (*setup_physical_interface)(struct e1000_hw *);
+ void (*rar_set)(struct e1000_hw *, u8 *, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+ s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
+ void (*release_swfw_sync)(struct e1000_hw *, u16);
+#ifdef CONFIG_IGB_HWMON
+ s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+#endif
+
+};
+
+struct e1000_phy_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*check_polarity)(struct e1000_hw *);
+ s32 (*check_reset_block)(struct e1000_hw *);
+ s32 (*force_speed_duplex)(struct e1000_hw *);
+ s32 (*get_cfg_done)(struct e1000_hw *hw);
+ s32 (*get_cable_length)(struct e1000_hw *);
+ s32 (*get_phy_info)(struct e1000_hw *);
+ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*reset)(struct e1000_hw *);
+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
+ s32 (*write_reg)(struct e1000_hw *, u32, u16);
+ s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
+};
+
+struct e1000_nvm_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
+ s32 (*update)(struct e1000_hw *);
+ s32 (*validate)(struct e1000_hw *);
+ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
+};
+
+#define E1000_MAX_SENSORS 3
+
+struct e1000_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+ struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
+struct e1000_info {
+ s32 (*get_invariants)(struct e1000_hw *);
+ struct e1000_mac_operations *mac_ops;
+ struct e1000_phy_operations *phy_ops;
+ struct e1000_nvm_operations *nvm_ops;
+};
+
+extern const struct e1000_info e1000_82575_info;
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ u32 mc_filter_type;
+ u32 txcw;
+
+ u16 mta_reg_count;
+ u16 uta_reg_count;
+
+ /* Maximum size of the MTA register table in all supported adapters */
+ #define MAX_MTA_REG 128
+ u32 mta_shadow[MAX_MTA_REG];
+ u16 rar_entry_count;
+
+ u8 forced_speed_duplex;
+
+ bool adaptive_ifs;
+ bool arc_subsystem_valid;
+ bool asf_firmware_present;
+ bool autoneg;
+ bool autoneg_failed;
+ bool disable_hw_init_bits;
+ bool get_link_status;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool report_tx_early;
+ bool serdes_has_link;
+ bool tx_pkt_filtering;
+ struct e1000_thermal_sensor_data thermal_sensor_data;
+};
+
+struct e1000_phy_info {
+ struct e1000_phy_operations ops;
+
+ enum e1000_phy_type type;
+
+ enum e1000_1000t_rx_status local_rx;
+ enum e1000_1000t_rx_status remote_rx;
+ enum e1000_ms_type ms_type;
+ enum e1000_ms_type original_ms_type;
+ enum e1000_rev_polarity cable_polarity;
+ enum e1000_smart_speed smart_speed;
+
+ u32 addr;
+ u32 id;
+ u32 reset_delay_us; /* in usec */
+ u32 revision;
+
+ enum e1000_media_type media_type;
+
+ u16 autoneg_advertised;
+ u16 autoneg_mask;
+ u16 cable_length;
+ u16 max_cable_length;
+ u16 min_cable_length;
+
+ u8 mdix;
+
+ bool disable_polarity_correction;
+ bool is_mdix;
+ bool polarity_correction;
+ bool reset_disable;
+ bool speed_downgraded;
+ bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+ struct e1000_nvm_operations ops;
+ enum e1000_nvm_type type;
+ enum e1000_nvm_override override;
+
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+
+ u16 word_size;
+ u16 delay_usec;
+ u16 address_bits;
+ u16 opcode_bits;
+ u16 page_size;
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
+ enum e1000_bus_width width;
+
+ u32 snoop;
+
+ u16 func;
+ u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_mode current_mode; /* Type of flow control */
+ enum e1000_fc_mode requested_mode;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct e1000_hw *, u16);
+ s32 (*check_for_ack)(struct e1000_hw *, u16);
+ s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_82575 {
+ bool sgmii_active;
+ bool global_device_reset;
+ bool eee_disable;
+ bool clear_semaphore_once;
+ struct e1000_sfp_flags eth_flags;
+ bool module_plugged;
+ u8 media_port;
+ bool media_changed;
+ bool mas_capable;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
+ struct e1000_mbx_info mbx;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+ union {
+ struct e1000_dev_spec_82575 _82575;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
+#define hw_dbg(format, arg...) \
+ netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
+
+/* These functions must be implemented by drivers */
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_i210-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,902 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* e1000_i210
+ * e1000_i211
+ */
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "e1000_hw-3.18-ethercat.h"
+#include "e1000_i210-3.18-ethercat.h"
+
+static s32 igb_update_flash_i210(struct e1000_hw *hw);
+
+/**
+ * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ */
+static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ /* In rare circumstances, the SW semaphore may already be held
+ * unintentionally. Clear the semaphore once before giving up.
+ */
+ if (hw->dev_spec._82575.clear_semaphore_once) {
+ hw->dev_spec._82575.clear_semaphore_once = false;
+ igb_put_hw_semaphore(hw);
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ }
+ }
+
+ /* If we do not have the semaphore here, we have to give up. */
+ if (i == timeout) {
+ hw_dbg("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_NVM;
+ }
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_acquire_nvm_i210 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
+{
+ return igb_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_release_nvm_i210 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_i210(struct e1000_hw *hw)
+{
+ igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore_i210(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /* Firmware currently using resource (fwmask) */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_i210 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore_i210(hw))
+ ; /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the Shadow Ram to read
+ * @words: number of words to read
+ * @data: word read from the Shadow Ram
+ *
+ * Reads a 16 bit word from the Shadow Ram using the EERD register.
+ * Uses necessary synchronization semaphores.
+ **/
+static s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (!(hw->nvm.ops.acquire(hw))) {
+ status = igb_read_nvm_eerd(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_write_nvm_srwr - Write to Shadow Ram using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow Ram to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow Ram
+ *
+ * Writes data to Shadow Ram at offset using EEWR register.
+ *
+ * If igb_update_nvm_checksum is not called after this function , the
+ * Shadow Ram will most likely contain an invalid checksum.
+ **/
+static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, k, eewr = 0;
+ u32 attempts = 100000;
+ s32 ret_val = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ (data[i] << E1000_NVM_RW_REG_DATA) |
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_SRWR, eewr);
+
+ for (k = 0; k < attempts; k++) {
+ if (E1000_NVM_RW_REG_DONE &
+ rd32(E1000_SRWR)) {
+ ret_val = 0;
+ break;
+ }
+ udelay(5);
+ }
+
+ if (ret_val) {
+ hw_dbg("Shadow RAM write EEWR timed out\n");
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow RAM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ * Writes data to Shadow RAM at offset using EEWR register.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * data will not be committed to FLASH and also Shadow RAM will most likely
+ * contain an invalid checksum.
+ *
+ * If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ * partially written.
+ **/
+static s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to write in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (!(hw->nvm.ops.acquire(hw))) {
+ status = igb_write_nvm_srwr(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_read_invm_word_i210 - Reads OTP
+ * @hw: pointer to the HW structure
+ * @address: the word address (aka eeprom offset) to read
+ * @data: pointer to the data read
+ *
+ * Reads 16-bit words from the OTP. Return error when the word is not
+ * stored in OTP.
+ **/
+static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
+{
+ s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ u32 invm_dword;
+ u16 i;
+ u8 record_type, word_address;
+
+ for (i = 0; i < E1000_INVM_SIZE; i++) {
+ invm_dword = rd32(E1000_INVM_DATA_REG(i));
+ /* Get record type */
+ record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
+ if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
+ break;
+ if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
+ i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
+ i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
+ word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
+ if (word_address == address) {
+ *data = INVM_DWORD_TO_WORD_DATA(invm_dword);
+ hw_dbg("Read INVM Word 0x%02x = %x\n",
+ address, *data);
+ status = 0;
+ break;
+ }
+ }
+ }
+ if (status)
+ hw_dbg("Requested word 0x%02x not found in OTP\n", address);
+ return status;
+}
+
+/**
+ * igb_read_invm_i210 - Read invm wrapper function for I210/I211
+ * @hw: pointer to the HW structure
+ * @words: number of words to read
+ * @data: pointer to the data read
+ *
+ * Wrapper function to return data formerly found in the NVM.
+ **/
+static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset,
+ u16 words __always_unused, u16 *data)
+{
+ s32 ret_val = 0;
+
+ /* Only the MAC addr is required to be present in the iNVM */
+ switch (offset) {
+ case NVM_MAC_ADDR:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, &data[0]);
+ ret_val |= igb_read_invm_word_i210(hw, (u8)offset+1,
+ &data[1]);
+ ret_val |= igb_read_invm_word_i210(hw, (u8)offset+2,
+ &data[2]);
+ if (ret_val)
+ hw_dbg("MAC Addr not found in iNVM\n");
+ break;
+ case NVM_INIT_CTRL_2:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_INIT_CTRL_2_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_INIT_CTRL_4:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_INIT_CTRL_4_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_LED_1_CFG:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_LED_1_CFG_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_LED_0_2_CFG:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_LED_0_2_CFG_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_ID_LED_SETTINGS:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = ID_LED_RESERVED_FFFF;
+ ret_val = 0;
+ }
+ break;
+ case NVM_SUB_DEV_ID:
+ *data = hw->subsystem_device_id;
+ break;
+ case NVM_SUB_VEN_ID:
+ *data = hw->subsystem_vendor_id;
+ break;
+ case NVM_DEV_ID:
+ *data = hw->device_id;
+ break;
+ case NVM_VEN_ID:
+ *data = hw->vendor_id;
+ break;
+ default:
+ hw_dbg("NVM word 0x%02x is not mapped.\n", offset);
+ *data = NVM_RESERVED_WORD;
+ break;
+ }
+ return ret_val;
+}
+
+/**
+ * igb_read_invm_version - Reads iNVM version and image type
+ * @hw: pointer to the HW structure
+ * @invm_ver: version structure for the version read
+ *
+ * Reads iNVM version and image type.
+ **/
+s32 igb_read_invm_version(struct e1000_hw *hw,
+ struct e1000_fw_version *invm_ver) {
+ u32 *record = NULL;
+ u32 *next_record = NULL;
+ u32 i = 0;
+ u32 invm_dword = 0;
+ u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
+ E1000_INVM_RECORD_SIZE_IN_BYTES);
+ u32 buffer[E1000_INVM_SIZE];
+ s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ u16 version = 0;
+
+ /* Read iNVM memory */
+ for (i = 0; i < E1000_INVM_SIZE; i++) {
+ invm_dword = rd32(E1000_INVM_DATA_REG(i));
+ buffer[i] = invm_dword;
+ }
+
+ /* Read version number */
+ for (i = 1; i < invm_blocks; i++) {
+ record = &buffer[invm_blocks - i];
+ next_record = &buffer[invm_blocks - i + 1];
+
+ /* Check if we have first version location used */
+ if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
+ version = 0;
+ status = 0;
+ break;
+ }
+ /* Check if we have second version location used */
+ else if ((i == 1) &&
+ ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
+ version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+ status = 0;
+ break;
+ }
+ /* Check if we have odd version location
+ * used and it is the last one used
+ */
+ else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&
+ ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
+ (i != 1))) {
+ version = (*next_record & E1000_INVM_VER_FIELD_TWO)
+ >> 13;
+ status = 0;
+ break;
+ }
+ /* Check if we have even version location
+ * used and it is the last one used
+ */
+ else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) &&
+ ((*record & 0x3) == 0)) {
+ version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+ status = 0;
+ break;
+ }
+ }
+
+ if (!status) {
+ invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK)
+ >> E1000_INVM_MAJOR_SHIFT;
+ invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK;
+ }
+ /* Read Image Type */
+ for (i = 1; i < invm_blocks; i++) {
+ record = &buffer[invm_blocks - i];
+ next_record = &buffer[invm_blocks - i + 1];
+
+ /* Check if we have image type in first location used */
+ if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) {
+ invm_ver->invm_img_type = 0;
+ status = 0;
+ break;
+ }
+ /* Check if we have image type in first location used */
+ else if ((((*record & 0x3) == 0) &&
+ ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) ||
+ ((((*record & 0x3) != 0) && (i != 1)))) {
+ invm_ver->invm_img_type =
+ (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23;
+ status = 0;
+ break;
+ }
+ }
+ return status;
+}
+
+/**
+ * igb_validate_nvm_checksum_i210 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 status = 0;
+ s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
+
+ if (!(hw->nvm.ops.acquire(hw))) {
+
+ /* Replace the read function with semaphore grabbing with
+ * the one that skips this for a while.
+ * We have semaphore taken already here.
+ */
+ read_op_ptr = hw->nvm.ops.read;
+ hw->nvm.ops.read = igb_read_nvm_eerd;
+
+ status = igb_validate_nvm_checksum(hw);
+
+ /* Revert original read operation. */
+ hw->nvm.ops.read = read_op_ptr;
+
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * igb_update_nvm_checksum_i210 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM. Next commit EEPROM data onto the Flash.
+ **/
+static s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ ret_val = igb_read_nvm_eerd(hw, 0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("EEPROM read failed\n");
+ goto out;
+ }
+
+ if (!(hw->nvm.ops.acquire(hw))) {
+ /* Do not use hw->nvm.ops.write, hw->nvm.ops.read
+ * because we do not want to take the synchronization
+ * semaphores twice here.
+ */
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = igb_read_nvm_eerd(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = igb_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
+ &checksum);
+ if (ret_val) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Write Error while updating checksum.\n");
+ goto out;
+ }
+
+ hw->nvm.ops.release(hw);
+
+ ret_val = igb_update_flash_i210(hw);
+ } else {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_pool_flash_update_done_i210 - Pool FLUDONE status.
+ * @hw: pointer to the HW structure
+ *
+ **/
+static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_NVM;
+ u32 i, reg;
+
+ for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
+ reg = rd32(E1000_EECD);
+ if (reg & E1000_EECD_FLUDONE_I210) {
+ ret_val = 0;
+ break;
+ }
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_get_flash_presence_i210 - Check if flash device is detected.
+ * @hw: pointer to the HW structure
+ *
+ **/
+bool igb_get_flash_presence_i210(struct e1000_hw *hw)
+{
+ u32 eec = 0;
+ bool ret_val = false;
+
+ eec = rd32(E1000_EECD);
+ if (eec & E1000_EECD_FLASH_DETECTED_I210)
+ ret_val = true;
+
+ return ret_val;
+}
+
+/**
+ * igb_update_flash_i210 - Commit EEPROM to the flash
+ * @hw: pointer to the HW structure
+ *
+ **/
+static s32 igb_update_flash_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 flup;
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val == -E1000_ERR_NVM) {
+ hw_dbg("Flash update time out\n");
+ goto out;
+ }
+
+ flup = rd32(E1000_EECD) | E1000_EECD_FLUPD_I210;
+ wr32(E1000_EECD, flup);
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val)
+ hw_dbg("Flash update complete\n");
+ else
+ hw_dbg("Flash update time out\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default_i210 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch (hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_I210_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT_I210;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * __igb_access_xmdio_reg - Read/write XMDIO register
+ * @hw: pointer to the HW structure
+ * @address: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: pointer to value to read/write from/to the XMDIO address
+ * @read: boolean flag to indicate read or write
+ **/
+static s32 __igb_access_xmdio_reg(struct e1000_hw *hw, u16 address,
+ u8 dev_addr, u16 *data, bool read)
+{
+ s32 ret_val = 0;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
+ dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ if (read)
+ ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
+ else
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
+ if (ret_val)
+ return ret_val;
+
+ /* Recalibrate the device back to 0 */
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
+ if (ret_val)
+ return ret_val;
+
+ return ret_val;
+}
+
+/**
+ * igb_read_xmdio_reg - Read XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be read from the EMI address
+ **/
+s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, data, true);
+}
+
+/**
+ * igb_write_xmdio_reg - Write XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be written to the XMDIO address
+ **/
+s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false);
+}
+
+/**
+ * igb_init_nvm_params_i210 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+s32 igb_init_nvm_params_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ struct e1000_nvm_info *nvm = &hw->nvm;
+
+ nvm->ops.acquire = igb_acquire_nvm_i210;
+ nvm->ops.release = igb_release_nvm_i210;
+ nvm->ops.valid_led_default = igb_valid_led_default_i210;
+
+ /* NVM Function Pointers */
+ if (igb_get_flash_presence_i210(hw)) {
+ hw->nvm.type = e1000_nvm_flash_hw;
+ nvm->ops.read = igb_read_nvm_srrd_i210;
+ nvm->ops.write = igb_write_nvm_srwr_i210;
+ nvm->ops.validate = igb_validate_nvm_checksum_i210;
+ nvm->ops.update = igb_update_nvm_checksum_i210;
+ } else {
+ hw->nvm.type = e1000_nvm_invm;
+ nvm->ops.read = igb_read_invm_i210;
+ nvm->ops.write = NULL;
+ nvm->ops.validate = NULL;
+ nvm->ops.update = NULL;
+ }
+ return ret_val;
+}
+
+/**
+ * igb_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+s32 igb_pll_workaround_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+ u16 nvm_word, phy_word, pci_word, tmp_nvm;
+ int i;
+
+ /* Get and set needed register values */
+ wuc = rd32(E1000_WUC);
+ mdicnfg = rd32(E1000_MDICNFG);
+ reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+ wr32(E1000_MDICNFG, reg_val);
+
+ /* Get data from NVM, or set default */
+ ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+ &nvm_word);
+ if (ret_val)
+ nvm_word = E1000_INVM_DEFAULT_AL;
+ tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+ /* check current state directly from internal PHY */
+ igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
+ if ((phy_word & E1000_PHY_PLL_UNCONF)
+ != E1000_PHY_PLL_UNCONF) {
+ ret_val = 0;
+ break;
+ } else {
+ ret_val = -E1000_ERR_PHY;
+ }
+ /* directly reset the internal PHY */
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ wr32(E1000_WUC, 0);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ pci_word |= E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ usleep_range(1000, 2000);
+ pci_word &= ~E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ /* restore WUC register */
+ wr32(E1000_WUC, wuc);
+ }
+ /* restore MDICNFG setting */
+ wr32(E1000_MDICNFG, mdicnfg);
+ return ret_val;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_i210-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,93 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_I210_H_
+#define _E1000_I210_H_
+
+s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
+s32 igb_read_invm_version(struct e1000_hw *hw,
+ struct e1000_fw_version *invm_ver);
+s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
+s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
+s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
+bool igb_get_flash_presence_i210(struct e1000_hw *hw);
+s32 igb_pll_workaround_i210(struct e1000_hw *hw);
+
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
+
+#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
+ (u8)((invm_dword) & 0x7)
+#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
+ (u8)(((invm_dword) & 0x0000FE00) >> 9)
+#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
+ (u16)(((invm_dword) & 0xFFFF0000) >> 16)
+
+enum E1000_INVM_STRUCTURE_TYPE {
+ E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00,
+ E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01,
+ E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02,
+ E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03,
+ E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04,
+ E1000_INVM_INVALIDATED_STRUCTURE = 0x0F,
+};
+
+#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8
+#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1
+#define E1000_INVM_ULT_BYTES_SIZE 8
+#define E1000_INVM_RECORD_SIZE_IN_BYTES 4
+#define E1000_INVM_VER_FIELD_ONE 0x1FF8
+#define E1000_INVM_VER_FIELD_TWO 0x7FE000
+#define E1000_INVM_IMGTYPE_FIELD 0x1F800000
+
+#define E1000_INVM_MAJOR_MASK 0x3F0
+#define E1000_INVM_MINOR_MASK 0xF
+#define E1000_INVM_MAJOR_SHIFT 4
+
+#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_OFF2))
+#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
+/* NVM offset defaults for i211 device */
+#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243
+#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1
+#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
+#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
+
+/* PLL Defines */
+#define E1000_PCI_PMCSR 0x44
+#define E1000_PCI_PMCSR_D3 0x03
+#define E1000_MAX_PLL_TRIES 5
+#define E1000_PHY_PLL_UNCONF 0xFF
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_REG 0x000E
+#define E1000_INVM_DEFAULT_AL 0x202F
+#define E1000_INVM_AUTOLOAD 0x0A
+#define E1000_INVM_PLL_WO_VAL 0x0010
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_i210-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,902 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* e1000_i210
+ * e1000_i211
+ */
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "e1000_hw.h"
+#include "e1000_i210.h"
+
+static s32 igb_update_flash_i210(struct e1000_hw *hw);
+
+/**
+ * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ */
+static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ /* In rare circumstances, the SW semaphore may already be held
+ * unintentionally. Clear the semaphore once before giving up.
+ */
+ if (hw->dev_spec._82575.clear_semaphore_once) {
+ hw->dev_spec._82575.clear_semaphore_once = false;
+ igb_put_hw_semaphore(hw);
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ }
+ }
+
+ /* If we do not have the semaphore here, we have to give up. */
+ if (i == timeout) {
+ hw_dbg("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_NVM;
+ }
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_acquire_nvm_i210 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
+{
+ return igb_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_release_nvm_i210 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_i210(struct e1000_hw *hw)
+{
+ igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore_i210(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /* Firmware currently using resource (fwmask) */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_i210 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore_i210(hw))
+ ; /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the Shadow Ram to read
+ * @words: number of words to read
+ * @data: word read from the Shadow Ram
+ *
+ * Reads a 16 bit word from the Shadow Ram using the EERD register.
+ * Uses necessary synchronization semaphores.
+ **/
+static s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (!(hw->nvm.ops.acquire(hw))) {
+ status = igb_read_nvm_eerd(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_write_nvm_srwr - Write to Shadow Ram using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow Ram to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow Ram
+ *
+ * Writes data to Shadow Ram at offset using EEWR register.
+ *
+ * If igb_update_nvm_checksum is not called after this function , the
+ * Shadow Ram will most likely contain an invalid checksum.
+ **/
+static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, k, eewr = 0;
+ u32 attempts = 100000;
+ s32 ret_val = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ (data[i] << E1000_NVM_RW_REG_DATA) |
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_SRWR, eewr);
+
+ for (k = 0; k < attempts; k++) {
+ if (E1000_NVM_RW_REG_DONE &
+ rd32(E1000_SRWR)) {
+ ret_val = 0;
+ break;
+ }
+ udelay(5);
+ }
+
+ if (ret_val) {
+ hw_dbg("Shadow RAM write EEWR timed out\n");
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow RAM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ * Writes data to Shadow RAM at offset using EEWR register.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * data will not be committed to FLASH and also Shadow RAM will most likely
+ * contain an invalid checksum.
+ *
+ * If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ * partially written.
+ **/
+static s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to write in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (!(hw->nvm.ops.acquire(hw))) {
+ status = igb_write_nvm_srwr(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * igb_read_invm_word_i210 - Reads OTP
+ * @hw: pointer to the HW structure
+ * @address: the word address (aka eeprom offset) to read
+ * @data: pointer to the data read
+ *
+ * Reads 16-bit words from the OTP. Return error when the word is not
+ * stored in OTP.
+ **/
+static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
+{
+ s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ u32 invm_dword;
+ u16 i;
+ u8 record_type, word_address;
+
+ for (i = 0; i < E1000_INVM_SIZE; i++) {
+ invm_dword = rd32(E1000_INVM_DATA_REG(i));
+ /* Get record type */
+ record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
+ if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
+ break;
+ if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
+ i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
+ i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
+ if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
+ word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
+ if (word_address == address) {
+ *data = INVM_DWORD_TO_WORD_DATA(invm_dword);
+ hw_dbg("Read INVM Word 0x%02x = %x\n",
+ address, *data);
+ status = 0;
+ break;
+ }
+ }
+ }
+ if (status)
+ hw_dbg("Requested word 0x%02x not found in OTP\n", address);
+ return status;
+}
+
+/**
+ * igb_read_invm_i210 - Read invm wrapper function for I210/I211
+ * @hw: pointer to the HW structure
+ * @words: number of words to read
+ * @data: pointer to the data read
+ *
+ * Wrapper function to return data formerly found in the NVM.
+ **/
+static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset,
+ u16 words __always_unused, u16 *data)
+{
+ s32 ret_val = 0;
+
+ /* Only the MAC addr is required to be present in the iNVM */
+ switch (offset) {
+ case NVM_MAC_ADDR:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, &data[0]);
+ ret_val |= igb_read_invm_word_i210(hw, (u8)offset+1,
+ &data[1]);
+ ret_val |= igb_read_invm_word_i210(hw, (u8)offset+2,
+ &data[2]);
+ if (ret_val)
+ hw_dbg("MAC Addr not found in iNVM\n");
+ break;
+ case NVM_INIT_CTRL_2:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_INIT_CTRL_2_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_INIT_CTRL_4:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_INIT_CTRL_4_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_LED_1_CFG:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_LED_1_CFG_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_LED_0_2_CFG:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = NVM_LED_0_2_CFG_DEFAULT_I211;
+ ret_val = 0;
+ }
+ break;
+ case NVM_ID_LED_SETTINGS:
+ ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
+ if (ret_val) {
+ *data = ID_LED_RESERVED_FFFF;
+ ret_val = 0;
+ }
+ break;
+ case NVM_SUB_DEV_ID:
+ *data = hw->subsystem_device_id;
+ break;
+ case NVM_SUB_VEN_ID:
+ *data = hw->subsystem_vendor_id;
+ break;
+ case NVM_DEV_ID:
+ *data = hw->device_id;
+ break;
+ case NVM_VEN_ID:
+ *data = hw->vendor_id;
+ break;
+ default:
+ hw_dbg("NVM word 0x%02x is not mapped.\n", offset);
+ *data = NVM_RESERVED_WORD;
+ break;
+ }
+ return ret_val;
+}
+
+/**
+ * igb_read_invm_version - Reads iNVM version and image type
+ * @hw: pointer to the HW structure
+ * @invm_ver: version structure for the version read
+ *
+ * Reads iNVM version and image type.
+ **/
+s32 igb_read_invm_version(struct e1000_hw *hw,
+ struct e1000_fw_version *invm_ver) {
+ u32 *record = NULL;
+ u32 *next_record = NULL;
+ u32 i = 0;
+ u32 invm_dword = 0;
+ u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
+ E1000_INVM_RECORD_SIZE_IN_BYTES);
+ u32 buffer[E1000_INVM_SIZE];
+ s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ u16 version = 0;
+
+ /* Read iNVM memory */
+ for (i = 0; i < E1000_INVM_SIZE; i++) {
+ invm_dword = rd32(E1000_INVM_DATA_REG(i));
+ buffer[i] = invm_dword;
+ }
+
+ /* Read version number */
+ for (i = 1; i < invm_blocks; i++) {
+ record = &buffer[invm_blocks - i];
+ next_record = &buffer[invm_blocks - i + 1];
+
+ /* Check if we have first version location used */
+ if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
+ version = 0;
+ status = 0;
+ break;
+ }
+ /* Check if we have second version location used */
+ else if ((i == 1) &&
+ ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
+ version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+ status = 0;
+ break;
+ }
+ /* Check if we have odd version location
+ * used and it is the last one used
+ */
+ else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&
+ ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
+ (i != 1))) {
+ version = (*next_record & E1000_INVM_VER_FIELD_TWO)
+ >> 13;
+ status = 0;
+ break;
+ }
+ /* Check if we have even version location
+ * used and it is the last one used
+ */
+ else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) &&
+ ((*record & 0x3) == 0)) {
+ version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
+ status = 0;
+ break;
+ }
+ }
+
+ if (!status) {
+ invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK)
+ >> E1000_INVM_MAJOR_SHIFT;
+ invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK;
+ }
+ /* Read Image Type */
+ for (i = 1; i < invm_blocks; i++) {
+ record = &buffer[invm_blocks - i];
+ next_record = &buffer[invm_blocks - i + 1];
+
+ /* Check if we have image type in first location used */
+ if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) {
+ invm_ver->invm_img_type = 0;
+ status = 0;
+ break;
+ }
+ /* Check if we have image type in first location used */
+ else if ((((*record & 0x3) == 0) &&
+ ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) ||
+ ((((*record & 0x3) != 0) && (i != 1)))) {
+ invm_ver->invm_img_type =
+ (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23;
+ status = 0;
+ break;
+ }
+ }
+ return status;
+}
+
+/**
+ * igb_validate_nvm_checksum_i210 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 status = 0;
+ s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
+
+ if (!(hw->nvm.ops.acquire(hw))) {
+
+ /* Replace the read function with semaphore grabbing with
+ * the one that skips this for a while.
+ * We have semaphore taken already here.
+ */
+ read_op_ptr = hw->nvm.ops.read;
+ hw->nvm.ops.read = igb_read_nvm_eerd;
+
+ status = igb_validate_nvm_checksum(hw);
+
+ /* Revert original read operation. */
+ hw->nvm.ops.read = read_op_ptr;
+
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * igb_update_nvm_checksum_i210 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM. Next commit EEPROM data onto the Flash.
+ **/
+static s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ ret_val = igb_read_nvm_eerd(hw, 0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("EEPROM read failed\n");
+ goto out;
+ }
+
+ if (!(hw->nvm.ops.acquire(hw))) {
+ /* Do not use hw->nvm.ops.write, hw->nvm.ops.read
+ * because we do not want to take the synchronization
+ * semaphores twice here.
+ */
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = igb_read_nvm_eerd(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = igb_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
+ &checksum);
+ if (ret_val) {
+ hw->nvm.ops.release(hw);
+ hw_dbg("NVM Write Error while updating checksum.\n");
+ goto out;
+ }
+
+ hw->nvm.ops.release(hw);
+
+ ret_val = igb_update_flash_i210(hw);
+ } else {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_pool_flash_update_done_i210 - Pool FLUDONE status.
+ * @hw: pointer to the HW structure
+ *
+ **/
+static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_NVM;
+ u32 i, reg;
+
+ for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
+ reg = rd32(E1000_EECD);
+ if (reg & E1000_EECD_FLUDONE_I210) {
+ ret_val = 0;
+ break;
+ }
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_get_flash_presence_i210 - Check if flash device is detected.
+ * @hw: pointer to the HW structure
+ *
+ **/
+bool igb_get_flash_presence_i210(struct e1000_hw *hw)
+{
+ u32 eec = 0;
+ bool ret_val = false;
+
+ eec = rd32(E1000_EECD);
+ if (eec & E1000_EECD_FLASH_DETECTED_I210)
+ ret_val = true;
+
+ return ret_val;
+}
+
+/**
+ * igb_update_flash_i210 - Commit EEPROM to the flash
+ * @hw: pointer to the HW structure
+ *
+ **/
+static s32 igb_update_flash_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 flup;
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val == -E1000_ERR_NVM) {
+ hw_dbg("Flash update time out\n");
+ goto out;
+ }
+
+ flup = rd32(E1000_EECD) | E1000_EECD_FLUPD_I210;
+ wr32(E1000_EECD, flup);
+
+ ret_val = igb_pool_flash_update_done_i210(hw);
+ if (ret_val)
+ hw_dbg("Flash update complete\n");
+ else
+ hw_dbg("Flash update time out\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default_i210 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch (hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_I210_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT_I210;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * __igb_access_xmdio_reg - Read/write XMDIO register
+ * @hw: pointer to the HW structure
+ * @address: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: pointer to value to read/write from/to the XMDIO address
+ * @read: boolean flag to indicate read or write
+ **/
+static s32 __igb_access_xmdio_reg(struct e1000_hw *hw, u16 address,
+ u8 dev_addr, u16 *data, bool read)
+{
+ s32 ret_val = 0;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
+ dev_addr);
+ if (ret_val)
+ return ret_val;
+
+ if (read)
+ ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
+ else
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
+ if (ret_val)
+ return ret_val;
+
+ /* Recalibrate the device back to 0 */
+ ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
+ if (ret_val)
+ return ret_val;
+
+ return ret_val;
+}
+
+/**
+ * igb_read_xmdio_reg - Read XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be read from the EMI address
+ **/
+s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, data, true);
+}
+
+/**
+ * igb_write_xmdio_reg - Write XMDIO register
+ * @hw: pointer to the HW structure
+ * @addr: XMDIO address to program
+ * @dev_addr: device address to program
+ * @data: value to be written to the XMDIO address
+ **/
+s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
+{
+ return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false);
+}
+
+/**
+ * igb_init_nvm_params_i210 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+s32 igb_init_nvm_params_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ struct e1000_nvm_info *nvm = &hw->nvm;
+
+ nvm->ops.acquire = igb_acquire_nvm_i210;
+ nvm->ops.release = igb_release_nvm_i210;
+ nvm->ops.valid_led_default = igb_valid_led_default_i210;
+
+ /* NVM Function Pointers */
+ if (igb_get_flash_presence_i210(hw)) {
+ hw->nvm.type = e1000_nvm_flash_hw;
+ nvm->ops.read = igb_read_nvm_srrd_i210;
+ nvm->ops.write = igb_write_nvm_srwr_i210;
+ nvm->ops.validate = igb_validate_nvm_checksum_i210;
+ nvm->ops.update = igb_update_nvm_checksum_i210;
+ } else {
+ hw->nvm.type = e1000_nvm_invm;
+ nvm->ops.read = igb_read_invm_i210;
+ nvm->ops.write = NULL;
+ nvm->ops.validate = NULL;
+ nvm->ops.update = NULL;
+ }
+ return ret_val;
+}
+
+/**
+ * igb_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+s32 igb_pll_workaround_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+ u16 nvm_word, phy_word, pci_word, tmp_nvm;
+ int i;
+
+ /* Get and set needed register values */
+ wuc = rd32(E1000_WUC);
+ mdicnfg = rd32(E1000_MDICNFG);
+ reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+ wr32(E1000_MDICNFG, reg_val);
+
+ /* Get data from NVM, or set default */
+ ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+ &nvm_word);
+ if (ret_val)
+ nvm_word = E1000_INVM_DEFAULT_AL;
+ tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+ /* check current state directly from internal PHY */
+ igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
+ if ((phy_word & E1000_PHY_PLL_UNCONF)
+ != E1000_PHY_PLL_UNCONF) {
+ ret_val = 0;
+ break;
+ } else {
+ ret_val = -E1000_ERR_PHY;
+ }
+ /* directly reset the internal PHY */
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ wr32(E1000_WUC, 0);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ pci_word |= E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ usleep_range(1000, 2000);
+ pci_word &= ~E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ /* restore WUC register */
+ wr32(E1000_WUC, wuc);
+ }
+ /* restore MDICNFG setting */
+ wr32(E1000_MDICNFG, mdicnfg);
+ return ret_val;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_i210-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,93 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_I210_H_
+#define _E1000_I210_H_
+
+s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
+s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
+s32 igb_read_invm_version(struct e1000_hw *hw,
+ struct e1000_fw_version *invm_ver);
+s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
+s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
+s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
+bool igb_get_flash_presence_i210(struct e1000_hw *hw);
+s32 igb_pll_workaround_i210(struct e1000_hw *hw);
+
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
+
+#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
+ (u8)((invm_dword) & 0x7)
+#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
+ (u8)(((invm_dword) & 0x0000FE00) >> 9)
+#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
+ (u16)(((invm_dword) & 0xFFFF0000) >> 16)
+
+enum E1000_INVM_STRUCTURE_TYPE {
+ E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00,
+ E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01,
+ E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02,
+ E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03,
+ E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04,
+ E1000_INVM_INVALIDATED_STRUCTURE = 0x0F,
+};
+
+#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8
+#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1
+#define E1000_INVM_ULT_BYTES_SIZE 8
+#define E1000_INVM_RECORD_SIZE_IN_BYTES 4
+#define E1000_INVM_VER_FIELD_ONE 0x1FF8
+#define E1000_INVM_VER_FIELD_TWO 0x7FE000
+#define E1000_INVM_IMGTYPE_FIELD 0x1F800000
+
+#define E1000_INVM_MAJOR_MASK 0x3F0
+#define E1000_INVM_MINOR_MASK 0xF
+#define E1000_INVM_MAJOR_SHIFT 4
+
+#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_OFF2))
+#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
+/* NVM offset defaults for i211 device */
+#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243
+#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1
+#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
+#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
+
+/* PLL Defines */
+#define E1000_PCI_PMCSR 0x44
+#define E1000_PCI_PMCSR_D3 0x03
+#define E1000_MAX_PLL_TRIES 5
+#define E1000_PHY_PLL_UNCONF 0xFF
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_REG 0x000E
+#define E1000_INVM_DEFAULT_AL 0x202F
+#define E1000_INVM_AUTOLOAD 0x0A
+#define E1000_INVM_PLL_WO_VAL 0x0010
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mac-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,1606 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "e1000_mac-3.18-ethercat.h"
+
+#include "igb-3.18-ethercat.h"
+
+static s32 igb_set_default_fc(struct e1000_hw *hw);
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
+
+/**
+ * igb_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+ u32 reg;
+ u16 pcie_link_status;
+
+ bus->type = e1000_bus_type_pci_express;
+
+ ret_val = igb_read_pcie_cap_reg(hw,
+ PCI_EXP_LNKSTA,
+ &pcie_link_status);
+ if (ret_val) {
+ bus->width = e1000_bus_width_unknown;
+ bus->speed = e1000_bus_speed_unknown;
+ } else {
+ switch (pcie_link_status & PCI_EXP_LNKSTA_CLS) {
+ case PCI_EXP_LNKSTA_CLS_2_5GB:
+ bus->speed = e1000_bus_speed_2500;
+ break;
+ case PCI_EXP_LNKSTA_CLS_5_0GB:
+ bus->speed = e1000_bus_speed_5000;
+ break;
+ default:
+ bus->speed = e1000_bus_speed_unknown;
+ break;
+ }
+
+ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCI_EXP_LNKSTA_NLW) >>
+ PCI_EXP_LNKSTA_NLW_SHIFT);
+ }
+
+ reg = rd32(E1000_STATUS);
+ bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+
+ return 0;
+}
+
+/**
+ * igb_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ array_wr32(E1000_VFTA, offset, 0);
+ wrfl();
+ }
+}
+
+/**
+ * igb_write_vfta - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ array_wr32(E1000_VFTA, offset, value);
+ wrfl();
+}
+
+/* Due to a hw errata, if the host tries to configure the VFTA register
+ * while performing queries from the BMC or DMA, then the VFTA in some
+ * cases won't be written.
+ */
+
+/**
+ * igb_clear_vfta_i350 - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta_i350(struct e1000_hw *hw)
+{
+ u32 offset;
+ int i;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ for (i = 0; i < 10; i++)
+ array_wr32(E1000_VFTA, offset, 0);
+
+ wrfl();
+ }
+}
+
+/**
+ * igb_write_vfta_i350 - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ int i;
+
+ for (i = 0; i < 10; i++)
+ array_wr32(E1000_VFTA, offset, value);
+
+ wrfl();
+}
+
+/**
+ * igb_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setups the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
+
+ /* Setup the receive address */
+ hw_dbg("Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++)
+ hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ * igb_vfta_set - enable or disable vlan in VLAN filter table
+ * @hw: pointer to the HW structure
+ * @vid: VLAN id to add or remove
+ * @add: if true add filter, if false remove
+ *
+ * Sets or clears a bit in the VLAN filter table array based on VLAN id
+ * and if we are adding or removing the filter
+ **/
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
+{
+ u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
+ u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ u32 vfta;
+ struct igb_adapter *adapter = hw->back;
+ s32 ret_val = 0;
+
+ vfta = adapter->shadow_vfta[index];
+
+ /* bit was set/cleared before we started */
+ if ((!!(vfta & mask)) == add) {
+ ret_val = -E1000_ERR_CONFIG;
+ } else {
+ if (add)
+ vfta |= mask;
+ else
+ vfta &= ~mask;
+ }
+ if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
+ igb_write_vfta_i350(hw, index, vfta);
+ else
+ igb_write_vfta(hw, index, vfta);
+ adapter->shadow_vfta[index] = vfta;
+
+ return ret_val;
+}
+
+/**
+ * igb_check_alt_mac_addr - Check for alternate MAC addr
+ * @hw: pointer to the HW structure
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
+ * address and must override the actual permanent MAC address. If an
+ * alternate MAC address is found it is saved in the hw struct and
+ * programmed into RAR0 and the function returns success, otherwise the
+ * function returns an error.
+ **/
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
+{
+ u32 i;
+ s32 ret_val = 0;
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ALEN];
+
+ /* Alternate MAC address is handled by the option ROM for 82580
+ * and newer. SW support not required.
+ */
+ if (hw->mac.type >= e1000_82580)
+ goto out;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+ (nvm_alt_mac_addr_offset == 0x0000))
+ /* There is no Alternate MAC Address */
+ goto out;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+ if (hw->bus.func == E1000_FUNC_2)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2;
+
+ if (hw->bus.func == E1000_FUNC_3)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3;
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
+ ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+ alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+ }
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (is_multicast_ether_addr(alt_mac_addr)) {
+ hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+ goto out;
+ }
+
+ /* We have a valid alternate MAC address, and we want to treat it the
+ * same as the normal permanent MAC address stored by the HW into the
+ * RAR. Do this by mapping this address into RAR0.
+ */
+ hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ /* Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+/**
+ * igb_mta_set - Set multicast filter table address
+ * @hw: pointer to the HW structure
+ * @hash_value: determines the MTA register and bit to set
+ *
+ * The multicast table address is a register array of 32-bit registers.
+ * The hash_value is used to determine what register the bit is in, the
+ * current value is read, the new bit is OR'd in and the new value is
+ * written back into the register.
+ **/
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg, mta;
+
+ /* The MTA is a register array of 32-bit registers. It is
+ * treated like an array of (32*mta_reg_count) bits. We want to
+ * set bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The (hw->mac.mta_reg_count - 1) serves as a
+ * mask to bits 31:5 of the hash value which gives us the
+ * register we're modifying. The hash bit within that register
+ * is determined by the lower 5 bits of the hash value.
+ */
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ mta = array_rd32(E1000_MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ array_wr32(E1000_MTA, hash_reg, mta);
+ wrfl();
+}
+
+/**
+ * igb_hash_mc_addr - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * igb_mta_set()
+ **/
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ /* The portion of the address that is used for the hash table
+ * is determined by the mc_filter_type setting.
+ * The algorithm is such that there is a total of 8 bits of shifting.
+ * The bit_shift for a mc_filter_type of 0 represents the number of
+ * left-shifts where the MSB of mc_addr[5] would still fall within
+ * the hash_mask. Case 0 does this exactly. Since there are a total
+ * of 8 bits of shifting, then mc_addr[4] will shift right the
+ * remaining number of bits. Thus 8 - bit_shift. The rest of the
+ * cases are a variation of this algorithm...essentially raising the
+ * number of bits to shift mc_addr[5] left, while still keeping the
+ * 8-bit shifting total.
+ *
+ * For example, given the following Destination MAC Address and an
+ * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+ * we can see that the bit_shift for case 0 is 4. These are the hash
+ * values resulting from each mc_filter_type...
+ * [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ *
+ * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+ * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+ * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
+ default:
+ case 0:
+ break;
+ case 1:
+ bit_shift += 1;
+ break;
+ case 2:
+ bit_shift += 2;
+ break;
+ case 3:
+ bit_shift += 4;
+ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
+/**
+ * igb_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+ rd32(E1000_CRCERRS);
+ rd32(E1000_SYMERRS);
+ rd32(E1000_MPC);
+ rd32(E1000_SCC);
+ rd32(E1000_ECOL);
+ rd32(E1000_MCC);
+ rd32(E1000_LATECOL);
+ rd32(E1000_COLC);
+ rd32(E1000_DC);
+ rd32(E1000_SEC);
+ rd32(E1000_RLEC);
+ rd32(E1000_XONRXC);
+ rd32(E1000_XONTXC);
+ rd32(E1000_XOFFRXC);
+ rd32(E1000_XOFFTXC);
+ rd32(E1000_FCRUC);
+ rd32(E1000_GPRC);
+ rd32(E1000_BPRC);
+ rd32(E1000_MPRC);
+ rd32(E1000_GPTC);
+ rd32(E1000_GORCL);
+ rd32(E1000_GORCH);
+ rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH);
+ rd32(E1000_RNBC);
+ rd32(E1000_RUC);
+ rd32(E1000_RFC);
+ rd32(E1000_ROC);
+ rd32(E1000_RJC);
+ rd32(E1000_TORL);
+ rd32(E1000_TORH);
+ rd32(E1000_TOTL);
+ rd32(E1000_TOTH);
+ rd32(E1000_TPR);
+ rd32(E1000_TPT);
+ rd32(E1000_MPTC);
+ rd32(E1000_BPTC);
+}
+
+/**
+ * igb_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+s32 igb_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /* We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ /* Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ igb_check_downshift(hw);
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /* Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ igb_config_collision_dist(hw);
+
+ /* Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg("Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+s32 igb_setup_link(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (igb_check_reset_block(hw))
+ goto out;
+
+ /* If requested flow control is set to default, set flow control
+ * based on the EEPROM flow control settings.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = igb_set_default_fc(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ hw_dbg("Initializing the Flow Control address, type and timer regs\n");
+ wr32(E1000_FCT, FLOW_CONTROL_TYPE);
+ wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ wr32(E1000_FCTTV, hw->fc.pause_time);
+
+ ret_val = igb_set_fc_watermarks(hw);
+
+out:
+
+ return ret_val;
+}
+
+/**
+ * igb_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void igb_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
+ tctl = rd32(E1000_TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ wr32(E1000_TCTL, tctl);
+ wrfl();
+}
+
+/**
+ * igb_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * tansmission as well.
+ **/
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 fcrtl = 0, fcrth = 0;
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
+ if (hw->fc.current_mode & e1000_fc_tx_pause) {
+ /* We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ fcrtl = hw->fc.low_water;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
+ fcrth = hw->fc.high_water;
+ }
+ wr32(E1000_FCRTL, fcrtl);
+ wr32(E1000_FCRTH, fcrth);
+
+ return ret_val;
+}
+
+/**
+ * igb_set_default_fc - Set flow control default values
+ * @hw: pointer to the HW structure
+ *
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
+static s32 igb_set_default_fc(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 lan_offset;
+ u16 nvm_data;
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->mac.type == e1000_i350) {
+ lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func);
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG
+ + lan_offset, 1, &nvm_data);
+ } else {
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG,
+ 1, &nvm_data);
+ }
+
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc.requested_mode = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else
+ hw->fc.requested_mode = e1000_fc_full;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * device control register to reflect the adapter settings. TFCE and RFCE
+ * need to be explicitly set by software when a copper PHY is used because
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igb_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = 0;
+
+ ctrl = rd32(E1000_CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc.current_mode" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+ hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ wr32(E1000_CTRL, ctrl);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * speed and duplex were not forced. If the link needed to be forced, then
+ * flow control needs to be forced also. If auto-negotiation is enabled
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ ret_val = igb_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ret_val = igb_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+ hw_dbg("Copper PHY and Auto Neg has not completed.\n");
+ goto out;
+ }
+
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (Address 4) and the Auto_Negotiation Base
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ goto out;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ hw_dbg("Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ hw_dbg("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->fc.requested_mode == e1000_fc_none) ||
+ (hw->fc.requested_mode == e1000_fc_tx_pause) ||
+ (hw->fc.strict_ieee)) {
+ hw->fc.current_mode = e1000_fc_none;
+ hw_dbg("Flow Control = NONE.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ hw_dbg("Error getting link speed and duplex\n");
+ goto out;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+ }
+ /* Check for the case where we have SerDes media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_internal_serdes)
+ && mac->autoneg) {
+ /* Read the PCS_LSTS and check to see if AutoNeg
+ * has completed.
+ */
+ pcs_status_reg = rd32(E1000_PCS_LSTAT);
+
+ if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) {
+ hw_dbg("PCS Auto Neg has not completed.\n");
+ return ret_val;
+ }
+
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (PCS_ANADV) and the Auto_Negotiation Base
+ * Page Ability Register (PCS_LPAB) to determine how
+ * flow control was negotiated.
+ */
+ pcs_adv_reg = rd32(E1000_PCS_ANADV);
+ pcs_lp_ability_reg = rd32(E1000_PCS_LPAB);
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (PCS_ANADV) and two bits in the Auto Negotiation Base
+ * Page Ability Register (PCS_LPAB) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | e1000_fc_full
+ *
+ */
+ if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) {
+ /* Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise Rx
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ hw_dbg("Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = Rx PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+ (pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ hw_dbg("Flow Control = Tx PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+ !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = Rx PAUSE frames only.\n");
+ } else {
+ /* Per the IEEE spec, at this point flow control
+ * should be disabled.
+ */
+ hw->fc.current_mode = e1000_fc_none;
+ hw_dbg("Flow Control = NONE.\n");
+ }
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ pcs_ctrl_reg = rd32(E1000_PCS_LCTL);
+ pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+ wr32(E1000_PCS_LCTL, pcs_ctrl_reg);
+
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ u32 status;
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ hw_dbg("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ hw_dbg("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ hw_dbg("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ }
+
+ return 0;
+}
+
+/**
+ * igb_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igb_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = 0;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access device - SMBI bit is set.\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+void igb_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
+ * igb_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
+s32 igb_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+ s32 ret_val = 0;
+
+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
+ if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
+ break;
+ usleep_range(1000, 2000);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
+ hw_dbg("Auto read by HW from NVM has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch (hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_82575_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ /* i210 and i211 devices have different LED mechanism */
+ if ((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211))
+ ret_val = igb_valid_led_default_i210(hw, &data);
+ else
+ ret_val = igb_valid_led_default(hw, &data);
+
+ if (ret_val)
+ goto out;
+
+ mac->ledctl_default = rd32(E1000_LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_cleanup_led - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
+s32 igb_cleanup_led(struct e1000_hw *hw)
+{
+ wr32(E1000_LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * igb_blink_led - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the led's which are set to be on.
+ **/
+s32 igb_blink_led(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* Set the blink bit for each LED that's "on" (0x0E)
+ * (or "off" if inverted) in ledctl_mode2. The blink
+ * logic in hardware only works when mode is set to "on"
+ * so it must be changed accordingly when the mode is
+ * "off" and inverted.
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 32; i += 8) {
+ u32 mode = (hw->mac.ledctl_mode2 >> i) &
+ E1000_LEDCTL_LED0_MODE_MASK;
+ u32 led_default = hw->mac.ledctl_default >> i;
+
+ if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_ON)) ||
+ ((led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_OFF))) {
+ ledctl_blink &=
+ ~(E1000_LEDCTL_LED0_MODE_MASK << i);
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_MODE_LED_ON) << i;
+ }
+ }
+ }
+
+ wr32(E1000_LEDCTL, ledctl_blink);
+
+ return 0;
+}
+
+/**
+ * igb_led_off - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
+s32 igb_led_off(struct e1000_hw *hw)
+{
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 (0) if successful, else returns -10
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ * the master requests to be disabled.
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+s32 igb_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+ s32 ret_val = 0;
+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ wr32(E1000_CTRL, ctrl);
+
+ while (timeout) {
+ if (!(rd32(E1000_STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("Master requests are pending.\n");
+ ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_mdi_setting - Verify MDI/MDIx settings
+ * @hw: pointer to the HW structure
+ *
+ * Verify that when not using auto-negotitation that MDI/MDIx is correctly
+ * set, which is forced to MDI mode only.
+ **/
+s32 igb_validate_mdi_setting(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* All MDI settings are supported on 82580 and newer. */
+ if (hw->mac.type >= e1000_82580)
+ goto out;
+
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+ hw_dbg("Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
+ * @hw: pointer to the HW structure
+ * @reg: 32bit register offset such as E1000_SCTL
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes an address/data control type register. There are several of these
+ * and they all have the format address << 8 | data and bit 31 is polled for
+ * completion.
+ **/
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data)
+{
+ u32 i, regvalue = 0;
+ s32 ret_val = 0;
+
+ /* Set up the address and data */
+ regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+ wr32(reg, regvalue);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+ udelay(5);
+ regvalue = rd32(reg);
+ if (regvalue & E1000_GEN_CTL_READY)
+ break;
+ }
+ if (!(regvalue & E1000_GEN_CTL_READY)) {
+ hw_dbg("Reg %08x did not indicate ready\n", reg);
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_enable_mng_pass_thru - Enable processing of ARP's
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
+ **/
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
+ if (!hw->mac.asf_firmware_present)
+ goto out;
+
+ manc = rd32(E1000_MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
+ goto out;
+
+ if (hw->mac.arc_subsystem_valid) {
+ fwsm = rd32(E1000_FWSM);
+ factps = rd32(E1000_FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+ ret_val = true;
+ goto out;
+ }
+ } else {
+ if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ ret_val = true;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mac-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,87 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+#include "e1000_hw-3.18-ethercat.h"
+
+#include "e1000_phy-3.18-ethercat.h"
+#include "e1000_nvm-3.18-ethercat.h"
+#include "e1000_defines-3.18-ethercat.h"
+#include "e1000_i210-3.18-ethercat.h"
+
+/* Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+s32 igb_blink_led(struct e1000_hw *hw);
+s32 igb_check_for_copper_link(struct e1000_hw *hw);
+s32 igb_cleanup_led(struct e1000_hw *hw);
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw);
+s32 igb_disable_pcie_master(struct e1000_hw *hw);
+s32 igb_force_mac_fc(struct e1000_hw *hw);
+s32 igb_get_auto_rd_done(struct e1000_hw *hw);
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw);
+s32 igb_get_hw_semaphore(struct e1000_hw *hw);
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+s32 igb_id_led_init(struct e1000_hw *hw);
+s32 igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count);
+s32 igb_setup_link(struct e1000_hw *hw);
+s32 igb_validate_mdi_setting(struct e1000_hw *hw);
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data);
+
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
+void igb_clear_vfta(struct e1000_hw *hw);
+void igb_clear_vfta_i350(struct e1000_hw *hw);
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
+void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
+void igb_put_hw_semaphore(struct e1000_hw *hw);
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
+
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mac-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,1606 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "e1000_mac.h"
+
+#include "igb.h"
+
+static s32 igb_set_default_fc(struct e1000_hw *hw);
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
+
+/**
+ * igb_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+ u32 reg;
+ u16 pcie_link_status;
+
+ bus->type = e1000_bus_type_pci_express;
+
+ ret_val = igb_read_pcie_cap_reg(hw,
+ PCI_EXP_LNKSTA,
+ &pcie_link_status);
+ if (ret_val) {
+ bus->width = e1000_bus_width_unknown;
+ bus->speed = e1000_bus_speed_unknown;
+ } else {
+ switch (pcie_link_status & PCI_EXP_LNKSTA_CLS) {
+ case PCI_EXP_LNKSTA_CLS_2_5GB:
+ bus->speed = e1000_bus_speed_2500;
+ break;
+ case PCI_EXP_LNKSTA_CLS_5_0GB:
+ bus->speed = e1000_bus_speed_5000;
+ break;
+ default:
+ bus->speed = e1000_bus_speed_unknown;
+ break;
+ }
+
+ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCI_EXP_LNKSTA_NLW) >>
+ PCI_EXP_LNKSTA_NLW_SHIFT);
+ }
+
+ reg = rd32(E1000_STATUS);
+ bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+
+ return 0;
+}
+
+/**
+ * igb_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ array_wr32(E1000_VFTA, offset, 0);
+ wrfl();
+ }
+}
+
+/**
+ * igb_write_vfta - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ array_wr32(E1000_VFTA, offset, value);
+ wrfl();
+}
+
+/* Due to a hw errata, if the host tries to configure the VFTA register
+ * while performing queries from the BMC or DMA, then the VFTA in some
+ * cases won't be written.
+ */
+
+/**
+ * igb_clear_vfta_i350 - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta_i350(struct e1000_hw *hw)
+{
+ u32 offset;
+ int i;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ for (i = 0; i < 10; i++)
+ array_wr32(E1000_VFTA, offset, 0);
+
+ wrfl();
+ }
+}
+
+/**
+ * igb_write_vfta_i350 - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ int i;
+
+ for (i = 0; i < 10; i++)
+ array_wr32(E1000_VFTA, offset, value);
+
+ wrfl();
+}
+
+/**
+ * igb_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setups the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
+
+ /* Setup the receive address */
+ hw_dbg("Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++)
+ hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ * igb_vfta_set - enable or disable vlan in VLAN filter table
+ * @hw: pointer to the HW structure
+ * @vid: VLAN id to add or remove
+ * @add: if true add filter, if false remove
+ *
+ * Sets or clears a bit in the VLAN filter table array based on VLAN id
+ * and if we are adding or removing the filter
+ **/
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
+{
+ u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
+ u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ u32 vfta;
+ struct igb_adapter *adapter = hw->back;
+ s32 ret_val = 0;
+
+ vfta = adapter->shadow_vfta[index];
+
+ /* bit was set/cleared before we started */
+ if ((!!(vfta & mask)) == add) {
+ ret_val = -E1000_ERR_CONFIG;
+ } else {
+ if (add)
+ vfta |= mask;
+ else
+ vfta &= ~mask;
+ }
+ if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
+ igb_write_vfta_i350(hw, index, vfta);
+ else
+ igb_write_vfta(hw, index, vfta);
+ adapter->shadow_vfta[index] = vfta;
+
+ return ret_val;
+}
+
+/**
+ * igb_check_alt_mac_addr - Check for alternate MAC addr
+ * @hw: pointer to the HW structure
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
+ * address and must override the actual permanent MAC address. If an
+ * alternate MAC address is found it is saved in the hw struct and
+ * programmed into RAR0 and the function returns success, otherwise the
+ * function returns an error.
+ **/
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
+{
+ u32 i;
+ s32 ret_val = 0;
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ALEN];
+
+ /* Alternate MAC address is handled by the option ROM for 82580
+ * and newer. SW support not required.
+ */
+ if (hw->mac.type >= e1000_82580)
+ goto out;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+ (nvm_alt_mac_addr_offset == 0x0000))
+ /* There is no Alternate MAC Address */
+ goto out;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+ if (hw->bus.func == E1000_FUNC_2)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2;
+
+ if (hw->bus.func == E1000_FUNC_3)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3;
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
+ ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+ alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+ }
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (is_multicast_ether_addr(alt_mac_addr)) {
+ hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+ goto out;
+ }
+
+ /* We have a valid alternate MAC address, and we want to treat it the
+ * same as the normal permanent MAC address stored by the HW into the
+ * RAR. Do this by mapping this address into RAR0.
+ */
+ hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ /* Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+/**
+ * igb_mta_set - Set multicast filter table address
+ * @hw: pointer to the HW structure
+ * @hash_value: determines the MTA register and bit to set
+ *
+ * The multicast table address is a register array of 32-bit registers.
+ * The hash_value is used to determine what register the bit is in, the
+ * current value is read, the new bit is OR'd in and the new value is
+ * written back into the register.
+ **/
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg, mta;
+
+ /* The MTA is a register array of 32-bit registers. It is
+ * treated like an array of (32*mta_reg_count) bits. We want to
+ * set bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The (hw->mac.mta_reg_count - 1) serves as a
+ * mask to bits 31:5 of the hash value which gives us the
+ * register we're modifying. The hash bit within that register
+ * is determined by the lower 5 bits of the hash value.
+ */
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ mta = array_rd32(E1000_MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ array_wr32(E1000_MTA, hash_reg, mta);
+ wrfl();
+}
+
+/**
+ * igb_hash_mc_addr - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * igb_mta_set()
+ **/
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ /* The portion of the address that is used for the hash table
+ * is determined by the mc_filter_type setting.
+ * The algorithm is such that there is a total of 8 bits of shifting.
+ * The bit_shift for a mc_filter_type of 0 represents the number of
+ * left-shifts where the MSB of mc_addr[5] would still fall within
+ * the hash_mask. Case 0 does this exactly. Since there are a total
+ * of 8 bits of shifting, then mc_addr[4] will shift right the
+ * remaining number of bits. Thus 8 - bit_shift. The rest of the
+ * cases are a variation of this algorithm...essentially raising the
+ * number of bits to shift mc_addr[5] left, while still keeping the
+ * 8-bit shifting total.
+ *
+ * For example, given the following Destination MAC Address and an
+ * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+ * we can see that the bit_shift for case 0 is 4. These are the hash
+ * values resulting from each mc_filter_type...
+ * [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ *
+ * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+ * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+ * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
+ default:
+ case 0:
+ break;
+ case 1:
+ bit_shift += 1;
+ break;
+ case 2:
+ bit_shift += 2;
+ break;
+ case 3:
+ bit_shift += 4;
+ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
+/**
+ * igb_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+ rd32(E1000_CRCERRS);
+ rd32(E1000_SYMERRS);
+ rd32(E1000_MPC);
+ rd32(E1000_SCC);
+ rd32(E1000_ECOL);
+ rd32(E1000_MCC);
+ rd32(E1000_LATECOL);
+ rd32(E1000_COLC);
+ rd32(E1000_DC);
+ rd32(E1000_SEC);
+ rd32(E1000_RLEC);
+ rd32(E1000_XONRXC);
+ rd32(E1000_XONTXC);
+ rd32(E1000_XOFFRXC);
+ rd32(E1000_XOFFTXC);
+ rd32(E1000_FCRUC);
+ rd32(E1000_GPRC);
+ rd32(E1000_BPRC);
+ rd32(E1000_MPRC);
+ rd32(E1000_GPTC);
+ rd32(E1000_GORCL);
+ rd32(E1000_GORCH);
+ rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH);
+ rd32(E1000_RNBC);
+ rd32(E1000_RUC);
+ rd32(E1000_RFC);
+ rd32(E1000_ROC);
+ rd32(E1000_RJC);
+ rd32(E1000_TORL);
+ rd32(E1000_TORH);
+ rd32(E1000_TOTL);
+ rd32(E1000_TOTH);
+ rd32(E1000_TPR);
+ rd32(E1000_TPT);
+ rd32(E1000_MPTC);
+ rd32(E1000_BPTC);
+}
+
+/**
+ * igb_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+s32 igb_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /* We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ /* Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ igb_check_downshift(hw);
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /* Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ igb_config_collision_dist(hw);
+
+ /* Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg("Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+s32 igb_setup_link(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (igb_check_reset_block(hw))
+ goto out;
+
+ /* If requested flow control is set to default, set flow control
+ * based on the EEPROM flow control settings.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = igb_set_default_fc(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ hw_dbg("Initializing the Flow Control address, type and timer regs\n");
+ wr32(E1000_FCT, FLOW_CONTROL_TYPE);
+ wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ wr32(E1000_FCTTV, hw->fc.pause_time);
+
+ ret_val = igb_set_fc_watermarks(hw);
+
+out:
+
+ return ret_val;
+}
+
+/**
+ * igb_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void igb_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
+ tctl = rd32(E1000_TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ wr32(E1000_TCTL, tctl);
+ wrfl();
+}
+
+/**
+ * igb_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * tansmission as well.
+ **/
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 fcrtl = 0, fcrth = 0;
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
+ if (hw->fc.current_mode & e1000_fc_tx_pause) {
+ /* We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ fcrtl = hw->fc.low_water;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
+ fcrth = hw->fc.high_water;
+ }
+ wr32(E1000_FCRTL, fcrtl);
+ wr32(E1000_FCRTH, fcrth);
+
+ return ret_val;
+}
+
+/**
+ * igb_set_default_fc - Set flow control default values
+ * @hw: pointer to the HW structure
+ *
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
+static s32 igb_set_default_fc(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 lan_offset;
+ u16 nvm_data;
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->mac.type == e1000_i350) {
+ lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func);
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG
+ + lan_offset, 1, &nvm_data);
+ } else {
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG,
+ 1, &nvm_data);
+ }
+
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc.requested_mode = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else
+ hw->fc.requested_mode = e1000_fc_full;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * device control register to reflect the adapter settings. TFCE and RFCE
+ * need to be explicitly set by software when a copper PHY is used because
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igb_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = 0;
+
+ ctrl = rd32(E1000_CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc.current_mode" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+ hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ wr32(E1000_CTRL, ctrl);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * speed and duplex were not forced. If the link needed to be forced, then
+ * flow control needs to be forced also. If auto-negotiation is enabled
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ ret_val = igb_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ret_val = igb_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+ hw_dbg("Copper PHY and Auto Neg has not completed.\n");
+ goto out;
+ }
+
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (Address 4) and the Auto_Negotiation Base
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ goto out;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ hw_dbg("Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ hw_dbg("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->fc.requested_mode == e1000_fc_none) ||
+ (hw->fc.requested_mode == e1000_fc_tx_pause) ||
+ (hw->fc.strict_ieee)) {
+ hw->fc.current_mode = e1000_fc_none;
+ hw_dbg("Flow Control = NONE.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ hw_dbg("Error getting link speed and duplex\n");
+ goto out;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+ }
+ /* Check for the case where we have SerDes media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_internal_serdes)
+ && mac->autoneg) {
+ /* Read the PCS_LSTS and check to see if AutoNeg
+ * has completed.
+ */
+ pcs_status_reg = rd32(E1000_PCS_LSTAT);
+
+ if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) {
+ hw_dbg("PCS Auto Neg has not completed.\n");
+ return ret_val;
+ }
+
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (PCS_ANADV) and the Auto_Negotiation Base
+ * Page Ability Register (PCS_LPAB) to determine how
+ * flow control was negotiated.
+ */
+ pcs_adv_reg = rd32(E1000_PCS_ANADV);
+ pcs_lp_ability_reg = rd32(E1000_PCS_LPAB);
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (PCS_ANADV) and two bits in the Auto Negotiation Base
+ * Page Ability Register (PCS_LPAB) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | e1000_fc_full
+ *
+ */
+ if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) {
+ /* Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise Rx
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ hw_dbg("Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = Rx PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+ (pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ hw_dbg("Flow Control = Tx PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
+ (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
+ !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
+ (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = Rx PAUSE frames only.\n");
+ } else {
+ /* Per the IEEE spec, at this point flow control
+ * should be disabled.
+ */
+ hw->fc.current_mode = e1000_fc_none;
+ hw_dbg("Flow Control = NONE.\n");
+ }
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ pcs_ctrl_reg = rd32(E1000_PCS_LCTL);
+ pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+ wr32(E1000_PCS_LCTL, pcs_ctrl_reg);
+
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ u32 status;
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ hw_dbg("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ hw_dbg("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ hw_dbg("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ }
+
+ return 0;
+}
+
+/**
+ * igb_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igb_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = 0;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access device - SMBI bit is set.\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+void igb_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
+ * igb_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
+s32 igb_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+ s32 ret_val = 0;
+
+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
+ if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
+ break;
+ usleep_range(1000, 2000);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
+ hw_dbg("Auto read by HW from NVM has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch (hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_82575_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ /* i210 and i211 devices have different LED mechanism */
+ if ((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211))
+ ret_val = igb_valid_led_default_i210(hw, &data);
+ else
+ ret_val = igb_valid_led_default(hw, &data);
+
+ if (ret_val)
+ goto out;
+
+ mac->ledctl_default = rd32(E1000_LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_cleanup_led - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
+s32 igb_cleanup_led(struct e1000_hw *hw)
+{
+ wr32(E1000_LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * igb_blink_led - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the led's which are set to be on.
+ **/
+s32 igb_blink_led(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* Set the blink bit for each LED that's "on" (0x0E)
+ * (or "off" if inverted) in ledctl_mode2. The blink
+ * logic in hardware only works when mode is set to "on"
+ * so it must be changed accordingly when the mode is
+ * "off" and inverted.
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 32; i += 8) {
+ u32 mode = (hw->mac.ledctl_mode2 >> i) &
+ E1000_LEDCTL_LED0_MODE_MASK;
+ u32 led_default = hw->mac.ledctl_default >> i;
+
+ if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_ON)) ||
+ ((led_default & E1000_LEDCTL_LED0_IVRT) &&
+ (mode == E1000_LEDCTL_MODE_LED_OFF))) {
+ ledctl_blink &=
+ ~(E1000_LEDCTL_LED0_MODE_MASK << i);
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_MODE_LED_ON) << i;
+ }
+ }
+ }
+
+ wr32(E1000_LEDCTL, ledctl_blink);
+
+ return 0;
+}
+
+/**
+ * igb_led_off - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
+s32 igb_led_off(struct e1000_hw *hw)
+{
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 (0) if successful, else returns -10
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ * the master requests to be disabled.
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+s32 igb_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+ s32 ret_val = 0;
+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ wr32(E1000_CTRL, ctrl);
+
+ while (timeout) {
+ if (!(rd32(E1000_STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("Master requests are pending.\n");
+ ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_mdi_setting - Verify MDI/MDIx settings
+ * @hw: pointer to the HW structure
+ *
+ * Verify that when not using auto-negotitation that MDI/MDIx is correctly
+ * set, which is forced to MDI mode only.
+ **/
+s32 igb_validate_mdi_setting(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* All MDI settings are supported on 82580 and newer. */
+ if (hw->mac.type >= e1000_82580)
+ goto out;
+
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+ hw_dbg("Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
+ * @hw: pointer to the HW structure
+ * @reg: 32bit register offset such as E1000_SCTL
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes an address/data control type register. There are several of these
+ * and they all have the format address << 8 | data and bit 31 is polled for
+ * completion.
+ **/
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data)
+{
+ u32 i, regvalue = 0;
+ s32 ret_val = 0;
+
+ /* Set up the address and data */
+ regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+ wr32(reg, regvalue);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+ udelay(5);
+ regvalue = rd32(reg);
+ if (regvalue & E1000_GEN_CTL_READY)
+ break;
+ }
+ if (!(regvalue & E1000_GEN_CTL_READY)) {
+ hw_dbg("Reg %08x did not indicate ready\n", reg);
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_enable_mng_pass_thru - Enable processing of ARP's
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
+ **/
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
+ if (!hw->mac.asf_firmware_present)
+ goto out;
+
+ manc = rd32(E1000_MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
+ goto out;
+
+ if (hw->mac.arc_subsystem_valid) {
+ fwsm = rd32(E1000_FWSM);
+ factps = rd32(E1000_FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+ ret_val = true;
+ goto out;
+ }
+ } else {
+ if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ ret_val = true;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mac-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,87 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+#include "e1000_hw.h"
+
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_defines.h"
+#include "e1000_i210.h"
+
+/* Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+s32 igb_blink_led(struct e1000_hw *hw);
+s32 igb_check_for_copper_link(struct e1000_hw *hw);
+s32 igb_cleanup_led(struct e1000_hw *hw);
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw);
+s32 igb_disable_pcie_master(struct e1000_hw *hw);
+s32 igb_force_mac_fc(struct e1000_hw *hw);
+s32 igb_get_auto_rd_done(struct e1000_hw *hw);
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw);
+s32 igb_get_hw_semaphore(struct e1000_hw *hw);
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+s32 igb_id_led_init(struct e1000_hw *hw);
+s32 igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count);
+s32 igb_setup_link(struct e1000_hw *hw);
+s32 igb_validate_mdi_setting(struct e1000_hw *hw);
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data);
+
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
+void igb_clear_vfta(struct e1000_hw *hw);
+void igb_clear_vfta_i350(struct e1000_hw *hw);
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
+void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
+void igb_put_hw_semaphore(struct e1000_hw *hw);
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
+
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mbx-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,443 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000_mbx-3.18-ethercat.h"
+
+/**
+ * igb_read_mbx - Reads a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfully read message from buffer
+ **/
+s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (mbx->ops.read)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = 0;
+
+ if (size > mbx->size)
+ ret_val = -E1000_ERR_MBX;
+
+ else if (mbx->ops.write)
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg - checks to see if someone sent us mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_msg)
+ ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack - checks to see if someone sent us ACK
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_ack)
+ ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst - checks to see if other side has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_rst)
+ ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = igb_poll_for_msg(hw, mbx_id);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = igb_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
+{
+ u32 mbvficr = rd32(E1000_MBVFICR);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbvficr & mask) {
+ ret_val = 0;
+ wr32(E1000_MBVFICR, mask);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg_pf - checks to see if the VF has sent mail
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack_pf - checks to see if the VF has ACKed
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst_pf - checks to see if the VF has reset
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ u32 vflre = rd32(E1000_VFLRE);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (vflre & (1 << vf_number)) {
+ ret_val = 0;
+ wr32(E1000_VFLRE, (1 << vf_number));
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_obtain_mbx_lock_pf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+ u32 p2v_mailbox;
+
+ /* Take ownership of the buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+ /* reserve mailbox for vf use */
+ p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+ if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+ ret_val = 0;
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx_pf - Places a message in the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ igb_check_for_msg_pf(hw, vf_number);
+ igb_check_for_ack_pf(hw, vf_number);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ array_wr32(E1000_VMBMEM(vf_number), i, msg[i]);
+
+ /* Interrupt VF to tell it a message has been sent and release buffer*/
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+ return ret_val;
+
+}
+
+/**
+ * igb_read_mbx_pf - Read a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * This function copies a message from the mailbox buffer to the caller's
+ * memory buffer. The presumption is that the caller knows that there was
+ * a message due to a VF request so no polling for message is needed.
+ **/
+static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = array_rd32(E1000_VMBMEM(vf_number), i);
+
+ /* Acknowledge the message and release buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * e1000_init_mbx_params_pf - set initial values for pf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+s32 igb_init_mbx_params_pf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ mbx->timeout = 0;
+ mbx->usec_delay = 0;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = igb_read_mbx_pf;
+ mbx->ops.write = igb_write_mbx_pf;
+ mbx->ops.read_posted = igb_read_posted_mbx;
+ mbx->ops.write_posted = igb_write_posted_mbx;
+ mbx->ops.check_for_msg = igb_check_for_msg_pf;
+ mbx->ops.check_for_ack = igb_check_for_ack_pf;
+ mbx->ops.check_for_rst = igb_check_for_rst_pf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return 0;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mbx-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,73 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "e1000_hw-3.18-ethercat.h"
+
+#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
+#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
+#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+/* Messages below or'd with this are the ACK */
+#define E1000_VT_MSGTYPE_ACK 0x80000000
+/* Messages below or'd with this are the NACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000
+/* Indicates that VF is still clear to send requests */
+#define E1000_VT_MSGTYPE_CTS 0x20000000
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_check_for_msg(struct e1000_hw *, u16);
+s32 igb_check_for_ack(struct e1000_hw *, u16);
+s32 igb_check_for_rst(struct e1000_hw *, u16);
+s32 igb_init_mbx_params_pf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mbx-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,443 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "e1000_mbx.h"
+
+/**
+ * igb_read_mbx - Reads a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfully read message from buffer
+ **/
+s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (mbx->ops.read)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = 0;
+
+ if (size > mbx->size)
+ ret_val = -E1000_ERR_MBX;
+
+ else if (mbx->ops.write)
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg - checks to see if someone sent us mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_msg)
+ ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack - checks to see if someone sent us ACK
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_ack)
+ ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst - checks to see if other side has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_rst)
+ ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = igb_poll_for_msg(hw, mbx_id);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = igb_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
+{
+ u32 mbvficr = rd32(E1000_MBVFICR);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbvficr & mask) {
+ ret_val = 0;
+ wr32(E1000_MBVFICR, mask);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg_pf - checks to see if the VF has sent mail
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack_pf - checks to see if the VF has ACKed
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst_pf - checks to see if the VF has reset
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ u32 vflre = rd32(E1000_VFLRE);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (vflre & (1 << vf_number)) {
+ ret_val = 0;
+ wr32(E1000_VFLRE, (1 << vf_number));
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_obtain_mbx_lock_pf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+ u32 p2v_mailbox;
+
+ /* Take ownership of the buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+ /* reserve mailbox for vf use */
+ p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+ if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+ ret_val = 0;
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx_pf - Places a message in the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ igb_check_for_msg_pf(hw, vf_number);
+ igb_check_for_ack_pf(hw, vf_number);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ array_wr32(E1000_VMBMEM(vf_number), i, msg[i]);
+
+ /* Interrupt VF to tell it a message has been sent and release buffer*/
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+ return ret_val;
+
+}
+
+/**
+ * igb_read_mbx_pf - Read a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * This function copies a message from the mailbox buffer to the caller's
+ * memory buffer. The presumption is that the caller knows that there was
+ * a message due to a VF request so no polling for message is needed.
+ **/
+static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = array_rd32(E1000_VMBMEM(vf_number), i);
+
+ /* Acknowledge the message and release buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * e1000_init_mbx_params_pf - set initial values for pf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+s32 igb_init_mbx_params_pf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ mbx->timeout = 0;
+ mbx->usec_delay = 0;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = igb_read_mbx_pf;
+ mbx->ops.write = igb_write_mbx_pf;
+ mbx->ops.read_posted = igb_read_posted_mbx;
+ mbx->ops.write_posted = igb_write_posted_mbx;
+ mbx->ops.check_for_msg = igb_check_for_msg_pf;
+ mbx->ops.check_for_ack = igb_check_for_ack_pf;
+ mbx->ops.check_for_rst = igb_check_for_rst_pf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return 0;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_mbx-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,73 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "e1000_hw.h"
+
+#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
+#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
+#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+/* Messages below or'd with this are the ACK */
+#define E1000_VT_MSGTYPE_ACK 0x80000000
+/* Messages below or'd with this are the NACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000
+/* Indicates that VF is still clear to send requests */
+#define E1000_VT_MSGTYPE_CTS 0x20000000
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_check_for_msg(struct e1000_hw *, u16);
+s32 igb_check_for_ack(struct e1000_hw *, u16);
+s32 igb_check_for_rst(struct e1000_hw *, u16);
+s32 igb_init_mbx_params_pf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_nvm-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,801 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac-3.18-ethercat.h"
+#include "e1000_nvm-3.18-ethercat.h"
+
+/**
+ * igb_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ wr32(E1000_EECD, eecd);
+ wrfl();
+
+ udelay(nvm->delay_usec);
+
+ igb_raise_eec_clk(hw, &eecd);
+ igb_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ igb_raise_eec_clk(hw, &eecd);
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ igb_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = rd32(E1000_EERD);
+ else
+ reg = rd32(E1000_EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE) {
+ ret_val = 0;
+ break;
+ }
+
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = rd32(E1000_EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+ s32 ret_val = 0;
+
+
+ wr32(E1000_EECD, eecd | E1000_EECD_REQ);
+ eecd = rd32(E1000_EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = rd32(E1000_EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+ hw_dbg("Could not acquire NVM grant\n");
+ ret_val = -E1000_ERR_NVM;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void igb_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = rd32(E1000_EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ igb_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * igb_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igb_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = rd32(E1000_EECD);
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ s32 ret_val = 0;
+ u16 timeout = 0;
+ u8 spi_stat_reg;
+
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(1);
+ timeout = NVM_MAX_RETRY_SPI;
+
+ /* Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ igb_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("SPI NVM Status error\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_spi - Read EEPROM's using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM.
+ **/
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i = 0;
+ s32 ret_val;
+ u16 word_in;
+ u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ igb_standby_nvm(hw);
+
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ read_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+ /* Read the data. SPI NVMs increment the address with each byte
+ * read and will roll over if reading beyond the end. This allows
+ * us to read the whole NVM from any offset
+ */
+ for (i = 0; i < words; i++) {
+ word_in = igb_shift_in_eec_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+
+release:
+ nvm->ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_EERD, eerd);
+ ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (rd32(E1000_EERD) >>
+ E1000_NVM_RW_REG_DATA);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likley contain an invalid checksum.
+ **/
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val = -E1000_ERR_NVM;
+ u16 widx = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ return ret_val;
+ }
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val) {
+ nvm->ops.release(hw);
+ return ret_val;
+ }
+
+ igb_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ igb_standby_nvm(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+
+ word_out = (word_out >> 8) | (word_out << 8);
+ igb_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ igb_standby_nvm(hw);
+ break;
+ }
+ }
+ usleep_range(1000, 2000);
+ nvm->ops.release(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_read_part_string - Read device part number
+ * @hw: pointer to the HW structure
+ * @part_num: pointer to device part number
+ * @part_num_size: size of part number buffer
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in part_num.
+ **/
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
+{
+ s32 ret_val;
+ u16 nvm_data;
+ u16 pointer;
+ u16 offset;
+ u16 length;
+
+ if (part_num == NULL) {
+ hw_dbg("PBA string buffer was null\n");
+ ret_val = E1000_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ /* if nvm_data is not ptr guard the PBA must be in legacy format which
+ * means pointer is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (nvm_data != NVM_PBA_PTR_GUARD) {
+ hw_dbg("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (part_num_size < 11) {
+ hw_dbg("PBA string buffer too small\n");
+ return E1000_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pointer */
+ part_num[0] = (nvm_data >> 12) & 0xF;
+ part_num[1] = (nvm_data >> 8) & 0xF;
+ part_num[2] = (nvm_data >> 4) & 0xF;
+ part_num[3] = nvm_data & 0xF;
+ part_num[4] = (pointer >> 12) & 0xF;
+ part_num[5] = (pointer >> 8) & 0xF;
+ part_num[6] = '-';
+ part_num[7] = 0;
+ part_num[8] = (pointer >> 4) & 0xF;
+ part_num[9] = pointer & 0xF;
+
+ /* put a null character on the end of our string */
+ part_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (part_num[offset] < 0xA)
+ part_num[offset] += '0';
+ else if (part_num[offset] < 0x10)
+ part_num[offset] += 'A' - 0xA;
+ }
+
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ hw_dbg("NVM PBA number section invalid length\n");
+ ret_val = E1000_ERR_NVM_PBA_SECTION;
+ goto out;
+ }
+ /* check if part_num buffer is big enough */
+ if (part_num_size < (((u32)length * 2) - 1)) {
+ hw_dbg("PBA string buffer too small\n");
+ ret_val = E1000_ERR_NO_SPACE;
+ goto out;
+ }
+
+ /* trim pba length from start of string */
+ pointer++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ part_num[offset * 2] = (u8)(nvm_data >> 8);
+ part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+ }
+ part_num[offset * 2] = '\0';
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_mac_addr - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 igb_read_mac_addr(struct e1000_hw *hw)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = rd32(E1000_RAH(0));
+ rar_low = rd32(E1000_RAL(0));
+
+ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return 0;
+}
+
+/**
+ * igb_validate_nvm_checksum - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_fw_version - Get firmware version information
+ * @hw: pointer to the HW structure
+ * @fw_vers: pointer to output structure
+ *
+ * unsupported MAC types will return all 0 version structure
+ **/
+void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
+{
+ u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
+ u8 q, hval, rem, result;
+ u16 comb_verh, comb_verl, comb_offset;
+
+ memset(fw_vers, 0, sizeof(struct e1000_fw_version));
+
+ /* basic eeprom version numbers and bits used vary by part and by tool
+ * used to create the nvm images. Check which data format we have.
+ */
+ hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+ switch (hw->mac.type) {
+ case e1000_i211:
+ igb_read_invm_version(hw, fw_vers);
+ return;
+ case e1000_82575:
+ case e1000_82576:
+ case e1000_82580:
+ /* Use this format, unless EETRACK ID exists,
+ * then use alternate format
+ */
+ if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
+ hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+ fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+ >> NVM_MAJOR_SHIFT;
+ fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK)
+ >> NVM_MINOR_SHIFT;
+ fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
+ goto etrack_id;
+ }
+ break;
+ case e1000_i210:
+ if (!(igb_get_flash_presence_i210(hw))) {
+ igb_read_invm_version(hw, fw_vers);
+ return;
+ }
+ /* fall through */
+ case e1000_i350:
+ /* find combo image version */
+ hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
+ if ((comb_offset != 0x0) &&
+ (comb_offset != NVM_VER_INVALID)) {
+
+ hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
+ + 1), 1, &comb_verh);
+ hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
+ 1, &comb_verl);
+
+ /* get Option Rom version if it exists and is valid */
+ if ((comb_verh && comb_verl) &&
+ ((comb_verh != NVM_VER_INVALID) &&
+ (comb_verl != NVM_VER_INVALID))) {
+
+ fw_vers->or_valid = true;
+ fw_vers->or_major =
+ comb_verl >> NVM_COMB_VER_SHFT;
+ fw_vers->or_build =
+ (comb_verl << NVM_COMB_VER_SHFT)
+ | (comb_verh >> NVM_COMB_VER_SHFT);
+ fw_vers->or_patch =
+ comb_verh & NVM_COMB_VER_MASK;
+ }
+ }
+ break;
+ default:
+ return;
+ }
+ hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+ fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+ >> NVM_MAJOR_SHIFT;
+
+ /* check for old style version format in newer images*/
+ if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
+ eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
+ } else {
+ eeprom_verl = (fw_version & NVM_MINOR_MASK)
+ >> NVM_MINOR_SHIFT;
+ }
+ /* Convert minor value to hex before assigning to output struct
+ * Val to be converted will not be higher than 99, per tool output
+ */
+ q = eeprom_verl / NVM_HEX_CONV;
+ hval = q * NVM_HEX_TENS;
+ rem = eeprom_verl % NVM_HEX_CONV;
+ result = hval + rem;
+ fw_vers->eep_minor = result;
+
+etrack_id:
+ if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
+ hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
+ hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
+ fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
+ | eeprom_verl;
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_nvm-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,56 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+s32 igb_acquire_nvm(struct e1000_hw *hw);
+void igb_release_nvm(struct e1000_hw *hw);
+s32 igb_read_mac_addr(struct e1000_hw *hw);
+s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
+ u32 part_num_size);
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw);
+s32 igb_update_nvm_checksum(struct e1000_hw *hw);
+
+struct e1000_fw_version {
+ u32 etrack_id;
+ u16 eep_major;
+ u16 eep_minor;
+ u16 eep_build;
+
+ u8 invm_major;
+ u8 invm_minor;
+ u8 invm_img_type;
+
+ bool or_valid;
+ u16 or_major;
+ u16 or_build;
+ u16 or_patch;
+};
+void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_nvm-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,801 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_nvm.h"
+
+/**
+ * igb_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ wr32(E1000_EECD, eecd);
+ wrfl();
+
+ udelay(nvm->delay_usec);
+
+ igb_raise_eec_clk(hw, &eecd);
+ igb_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ igb_raise_eec_clk(hw, &eecd);
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ igb_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = rd32(E1000_EERD);
+ else
+ reg = rd32(E1000_EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE) {
+ ret_val = 0;
+ break;
+ }
+
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = rd32(E1000_EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+ s32 ret_val = 0;
+
+
+ wr32(E1000_EECD, eecd | E1000_EECD_REQ);
+ eecd = rd32(E1000_EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = rd32(E1000_EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+ hw_dbg("Could not acquire NVM grant\n");
+ ret_val = -E1000_ERR_NVM;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void igb_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = rd32(E1000_EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ igb_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * igb_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igb_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = rd32(E1000_EECD);
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ s32 ret_val = 0;
+ u16 timeout = 0;
+ u8 spi_stat_reg;
+
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(1);
+ timeout = NVM_MAX_RETRY_SPI;
+
+ /* Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ igb_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("SPI NVM Status error\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_spi - Read EEPROM's using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM.
+ **/
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i = 0;
+ s32 ret_val;
+ u16 word_in;
+ u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ igb_standby_nvm(hw);
+
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ read_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+ /* Read the data. SPI NVMs increment the address with each byte
+ * read and will roll over if reading beyond the end. This allows
+ * us to read the whole NVM from any offset
+ */
+ for (i = 0; i < words; i++) {
+ word_in = igb_shift_in_eec_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+
+release:
+ nvm->ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_EERD, eerd);
+ ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (rd32(E1000_EERD) >>
+ E1000_NVM_RW_REG_DATA);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likley contain an invalid checksum.
+ **/
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val = -E1000_ERR_NVM;
+ u16 widx = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ return ret_val;
+ }
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val) {
+ nvm->ops.release(hw);
+ return ret_val;
+ }
+
+ igb_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ igb_standby_nvm(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+
+ word_out = (word_out >> 8) | (word_out << 8);
+ igb_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ igb_standby_nvm(hw);
+ break;
+ }
+ }
+ usleep_range(1000, 2000);
+ nvm->ops.release(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_read_part_string - Read device part number
+ * @hw: pointer to the HW structure
+ * @part_num: pointer to device part number
+ * @part_num_size: size of part number buffer
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in part_num.
+ **/
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
+{
+ s32 ret_val;
+ u16 nvm_data;
+ u16 pointer;
+ u16 offset;
+ u16 length;
+
+ if (part_num == NULL) {
+ hw_dbg("PBA string buffer was null\n");
+ ret_val = E1000_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ /* if nvm_data is not ptr guard the PBA must be in legacy format which
+ * means pointer is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (nvm_data != NVM_PBA_PTR_GUARD) {
+ hw_dbg("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (part_num_size < 11) {
+ hw_dbg("PBA string buffer too small\n");
+ return E1000_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pointer */
+ part_num[0] = (nvm_data >> 12) & 0xF;
+ part_num[1] = (nvm_data >> 8) & 0xF;
+ part_num[2] = (nvm_data >> 4) & 0xF;
+ part_num[3] = nvm_data & 0xF;
+ part_num[4] = (pointer >> 12) & 0xF;
+ part_num[5] = (pointer >> 8) & 0xF;
+ part_num[6] = '-';
+ part_num[7] = 0;
+ part_num[8] = (pointer >> 4) & 0xF;
+ part_num[9] = pointer & 0xF;
+
+ /* put a null character on the end of our string */
+ part_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (part_num[offset] < 0xA)
+ part_num[offset] += '0';
+ else if (part_num[offset] < 0x10)
+ part_num[offset] += 'A' - 0xA;
+ }
+
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ hw_dbg("NVM PBA number section invalid length\n");
+ ret_val = E1000_ERR_NVM_PBA_SECTION;
+ goto out;
+ }
+ /* check if part_num buffer is big enough */
+ if (part_num_size < (((u32)length * 2) - 1)) {
+ hw_dbg("PBA string buffer too small\n");
+ ret_val = E1000_ERR_NO_SPACE;
+ goto out;
+ }
+
+ /* trim pba length from start of string */
+ pointer++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ part_num[offset * 2] = (u8)(nvm_data >> 8);
+ part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+ }
+ part_num[offset * 2] = '\0';
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_mac_addr - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 igb_read_mac_addr(struct e1000_hw *hw)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = rd32(E1000_RAH(0));
+ rar_low = rd32(E1000_RAL(0));
+
+ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return 0;
+}
+
+/**
+ * igb_validate_nvm_checksum - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_fw_version - Get firmware version information
+ * @hw: pointer to the HW structure
+ * @fw_vers: pointer to output structure
+ *
+ * unsupported MAC types will return all 0 version structure
+ **/
+void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
+{
+ u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
+ u8 q, hval, rem, result;
+ u16 comb_verh, comb_verl, comb_offset;
+
+ memset(fw_vers, 0, sizeof(struct e1000_fw_version));
+
+ /* basic eeprom version numbers and bits used vary by part and by tool
+ * used to create the nvm images. Check which data format we have.
+ */
+ hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
+ switch (hw->mac.type) {
+ case e1000_i211:
+ igb_read_invm_version(hw, fw_vers);
+ return;
+ case e1000_82575:
+ case e1000_82576:
+ case e1000_82580:
+ /* Use this format, unless EETRACK ID exists,
+ * then use alternate format
+ */
+ if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
+ hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+ fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+ >> NVM_MAJOR_SHIFT;
+ fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK)
+ >> NVM_MINOR_SHIFT;
+ fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
+ goto etrack_id;
+ }
+ break;
+ case e1000_i210:
+ if (!(igb_get_flash_presence_i210(hw))) {
+ igb_read_invm_version(hw, fw_vers);
+ return;
+ }
+ /* fall through */
+ case e1000_i350:
+ /* find combo image version */
+ hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
+ if ((comb_offset != 0x0) &&
+ (comb_offset != NVM_VER_INVALID)) {
+
+ hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
+ + 1), 1, &comb_verh);
+ hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
+ 1, &comb_verl);
+
+ /* get Option Rom version if it exists and is valid */
+ if ((comb_verh && comb_verl) &&
+ ((comb_verh != NVM_VER_INVALID) &&
+ (comb_verl != NVM_VER_INVALID))) {
+
+ fw_vers->or_valid = true;
+ fw_vers->or_major =
+ comb_verl >> NVM_COMB_VER_SHFT;
+ fw_vers->or_build =
+ (comb_verl << NVM_COMB_VER_SHFT)
+ | (comb_verh >> NVM_COMB_VER_SHFT);
+ fw_vers->or_patch =
+ comb_verh & NVM_COMB_VER_MASK;
+ }
+ }
+ break;
+ default:
+ return;
+ }
+ hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
+ fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
+ >> NVM_MAJOR_SHIFT;
+
+ /* check for old style version format in newer images*/
+ if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
+ eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
+ } else {
+ eeprom_verl = (fw_version & NVM_MINOR_MASK)
+ >> NVM_MINOR_SHIFT;
+ }
+ /* Convert minor value to hex before assigning to output struct
+ * Val to be converted will not be higher than 99, per tool output
+ */
+ q = eeprom_verl / NVM_HEX_CONV;
+ hval = q * NVM_HEX_TENS;
+ rem = eeprom_verl % NVM_HEX_CONV;
+ result = hval + rem;
+ fw_vers->eep_minor = result;
+
+etrack_id:
+ if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
+ hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
+ hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
+ fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
+ | eeprom_verl;
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_nvm-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,56 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+s32 igb_acquire_nvm(struct e1000_hw *hw);
+void igb_release_nvm(struct e1000_hw *hw);
+s32 igb_read_mac_addr(struct e1000_hw *hw);
+s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
+ u32 part_num_size);
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw);
+s32 igb_update_nvm_checksum(struct e1000_hw *hw);
+
+struct e1000_fw_version {
+ u32 etrack_id;
+ u16 eep_major;
+ u16 eep_minor;
+ u16 eep_build;
+
+ u8 invm_major;
+ u8 invm_minor;
+ u8 invm_img_type;
+
+ bool or_valid;
+ u16 or_major;
+ u16 or_build;
+ u16 or_patch;
+};
+void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_phy-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,2511 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac-3.18-ethercat.h"
+#include "e1000_phy-3.18-ethercat.h"
+
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
+static s32 igb_wait_autoneg(struct e1000_hw *hw);
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_m88_cable_length_table) / \
+ sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_igp_2_cable_length_table) / \
+ sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ * igb_check_reset_block - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return 0, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
+s32 igb_check_reset_block(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ manc = rd32(E1000_MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ * igb_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+s32 igb_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+
+ ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.write_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /* Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ wr32(E1000_MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Read did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ *data = (u16) mdic;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /* Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ wr32(E1000_MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Write did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_i2c - Read PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the i2c interface and stores the
+ * retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+
+ /* Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ (E1000_I2CCMD_OPCODE_READ));
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Need to byte-swap the 16-bit value. */
+ *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+ return 0;
+}
+
+/**
+ * igb_write_phy_reg_i2c - Write PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+ u16 phy_data_swapped;
+
+ /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
+ if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
+ hw_dbg("PHY I2C Address %d is out of range.\n",
+ hw->phy.addr);
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Swap the data bytes for the I2C interface */
+ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+ /* Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_WRITE |
+ phy_data_swapped);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_sfp_data_byte - Reads SFP module data.
+ * @hw: pointer to the HW structure
+ * @offset: byte location offset to be read
+ * @data: read data buffer pointer
+ *
+ * Reads one byte from SFP module data stored
+ * in SFP resided EEPROM memory or SFP diagnostic area.
+ * Function should be called with
+ * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ * access
+ **/
+s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
+{
+ u32 i = 0;
+ u32 i2ccmd = 0;
+ u32 data_local = 0;
+
+ if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
+ hw_dbg("I2CCMD command address exceeds upper limit\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Set up Op-code, EEPROM Address,in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * EEPROM to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_READ);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ data_local = rd32(E1000_I2CCMD);
+ if (data_local & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(data_local & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (data_local & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+ *data = (u8) data_local & 0xFF;
+
+ return 0;
+}
+
+/**
+ * igb_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (phy->type == e1000_phy_82580) {
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
+
+ /* Enable downshift */
+ phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
+
+ ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Set MDI/MDIX mode */
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ goto out;
+ phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
+ /* Options:
+ * 0 - Auto (default)
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ */
+ switch (hw->phy.mdix) {
+ case 1:
+ break;
+ case 2:
+ phy_data |= I82580_PHY_CTRL2_MANUAL_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= I82580_PHY_CTRL2_AUTO_MDI_MDIX;
+ break;
+ }
+ ret_val = hw->phy.ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ if (phy->revision < E1000_REVISION_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((phy->revision == E1000_REVISION_2) &&
+ (phy->id == M88E1111_I_PHY_ID)) {
+ /* 82573L PHY - set the downshift counter to 5x. */
+ phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ * Also enables and sets the downshift parameters.
+ **/
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable)
+ return 0;
+
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ /* M88E1112 does not support this mode) */
+ if (phy->id != M88E1112_E_PHY_ID) {
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ }
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ /* Enable downshift and setting it to X6 */
+ if (phy->id == M88E1543_E_PHY_ID) {
+ phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE;
+ ret_val =
+ phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+ }
+
+ phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+ ret_val = igb_set_master_slave_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ return 0;
+}
+
+/**
+ * igb_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+
+ /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
+ msleep(100);
+
+ /* The NVM settings will configure LPLU in D3 for
+ * non-IGP1 PHYs.
+ */
+ if (phy->type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ if (phy->ops.set_d3_lplu_state)
+ ret_val = phy->ops.set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D3\n");
+ goto out;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = phy->ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D0\n");
+ goto out;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (phy->mdix) {
+ case 1:
+ data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ /* set auto-master slave resolution settings */
+ if (hw->mac.autoneg) {
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default.
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Set auto Master/Slave resolution process */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~CR_1000T_MS_ENABLE;
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ /* load defaults for future use */
+ phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+ ((data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy->ms_type) {
+ case e1000_ms_force_master:
+ data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ data |= CR_1000T_MS_ENABLE;
+ data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_autoneg - Setup/Enable autoneg for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Performs initial bounds checking on autoneg advertisement parameter, then
+ * configure to advertise the full capability. Setup the PHY to autoneg
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ /* Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ */
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
+ hw_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = igb_phy_setup_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error Setting up Auto-Negotiation\n");
+ goto out;
+ }
+ hw_dbg("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = igb_wait_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error while waiting for autoneg to complete\n");
+ goto out;
+ }
+ }
+
+ hw->mac.get_link_status = true;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_setup_autoneg - Configure PHY for auto-negotiation
+ * @hw: pointer to the HW structure
+ *
+ * Reads the MII auto-neg advertisement register and/or the 1000T control
+ * register and if the PHY is already setup for auto-negotiation, then
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+ &mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+ NWAY_AR_100TX_HD_CAPS |
+ NWAY_AR_10T_FD_CAPS |
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+ hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+ hw_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+ hw_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+ hw_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+ hw_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+ hw_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+ hw_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+ * negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause:
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause:
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full:
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ ret_val = phy->ops.write_reg(hw,
+ PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * speed and duplex. Then we check for link, once link is established calls
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ bool link;
+
+ if (hw->mac.autoneg) {
+ /* Setup autoneg and flow control advertisement and perform
+ * autonegotiation.
+ */
+ ret_val = igb_copper_link_autoneg(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
+ hw_dbg("Forcing Speed and Duplex\n");
+ ret_val = hw->phy.ops.force_speed_duplex(hw);
+ if (ret_val) {
+ hw_dbg("Error Forcing Speed and Duplex\n");
+ goto out;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
+ if (ret_val)
+ goto out;
+
+ if (link) {
+ hw_dbg("Valid link established!!!\n");
+ igb_config_collision_dist(hw);
+ ret_val = igb_config_fc_after_link_up(hw);
+ } else {
+ hw_dbg("Unable to establish link!!!\n");
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("IGP PSCR: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 10000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 10000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Resets the PHY to commit the
+ * changes. If time expires while waiting for link up, we reset the DSP.
+ * After reset, TX_CLK and CRS on TX must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /* I210 and I211 devices support Auto-Crossover in forced operation. */
+ if (phy->type != e1000_phy_i210) {
+ /* Clear Auto-Crossover to force MDI manually. M88E1000
+ * requires MDI forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("M88E1000 PSCR: %X\n", phy_data);
+ }
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Reset the phy to commit changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ bool reset_dsp = true;
+
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
+ reset_dsp = false;
+ break;
+ default:
+ if (hw->phy.type != e1000_phy_m88)
+ reset_dsp = false;
+ break;
+ }
+ if (!reset_dsp)
+ hw_dbg("Link taking longer than expected.\n");
+ else {
+ /* We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = phy->ops.write_reg(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ goto out;
+ ret_val = igb_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+ if (hw->phy.type != e1000_phy_m88 ||
+ hw->phy.id == I347AT4_E_PHY_ID ||
+ hw->phy.id == M88E1112_E_PHY_ID ||
+ hw->phy.id == I210_I_PHY_ID)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Resetting the phy means we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock from
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * Forces speed and duplex on the PHY by doing the following: disable flow
+ * control, force speed/duplex on the MAC, disable auto speed detection,
+ * disable auto-negotiation, configure duplex, configure speed, configure
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
+ /* Turn off flow control when forcing speed/duplex */
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ /* Disable Auto Speed Detection */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Disable autoneg on the phy */
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Forcing Full or Half Duplex? */
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ hw_dbg("Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ hw_dbg("Forcing 10mb\n");
+ }
+
+ igb_config_collision_dist(hw);
+
+ wr32(E1000_CTRL, ctrl);
+}
+
+/**
+ * igb_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 data;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_downshift - Checks whether a downshift in speed occurred
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
+s32 igb_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ switch (phy->type) {
+ case e1000_phy_i210:
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ case e1000_phy_igp_2:
+ case e1000_phy_igp:
+ case e1000_phy_igp_3:
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ break;
+ default:
+ /* speed downshift not supported */
+ phy->speed_downgraded = false;
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask) ? true : false;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_m88 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+s32 igb_check_polarity_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_igp - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY port status register, and the
+ * current speed (since there is no polarity at 100Mbps).
+ **/
+static s32 igb_check_polarity_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data, offset, mask;
+
+ /* Polarity is determined based on the speed of
+ * our connection.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
+ } else {
+ /* This really only applies to 10Mbps since
+ * there is no polarity for 100Mbps (always 0).
+ */
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_wait_autoneg - Wait for auto-neg completion
+ * @hw: pointer to the HW structure
+ *
+ * Waits for auto-negotiation to complete or for the auto-negotiation time
+ * limit to expire, which ever happens first.
+ **/
+static s32 igb_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
+ msleep(100);
+ }
+
+ /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ * has completed.
+ */
+ return ret_val;
+}
+
+/**
+ * igb_phy_has_link - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ * @success: pointer to whether polling was successful or not
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ for (i = 0; i < iterations; i++) {
+ /* Some PHYs require the PHY_STATUS register to be read
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val && usec_interval > 0) {
+ /* If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+
+ *success = (i < iterations) ? true : false;
+
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * information. The cable length is determined by averaging the minimum and
+ * maximum values to get the "average" cable length. The m88 PHY has four
+ * possible cable length values, which are:
+ * Register Value Cable Length
+ * 0 < 50 meters
+ * 1 50 - 80 meters
+ * 2 80 - 110 meters
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
+s32 igb_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, phy_data2, index, default_page, is_cm;
+
+ switch (hw->phy.id) {
+ case I210_I_PHY_ID:
+ /* Get cable length from PHY Cable Diagnostics Control Reg */
+ ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+ (I347AT4_PCDL + phy->addr),
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check if the unit of cable length is meters or cm */
+ ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+ I347AT4_PCDC, &phy_data2);
+ if (ret_val)
+ return ret_val;
+
+ is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+ /* Populate the phy structure with cable length in meters */
+ phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->cable_length = phy_data / (is_cm ? 100 : 1);
+ break;
+ case M88E1543_E_PHY_ID:
+ case I347AT4_E_PHY_ID:
+ /* Remember the original page select and set it to 7 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+ if (ret_val)
+ goto out;
+
+ /* Get cable length from PHY Cable Diagnostics Control Reg */
+ ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Check if the unit of cable length is meters or cm */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+ if (ret_val)
+ goto out;
+
+ is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+ /* Populate the phy structure with cable length in meters */
+ phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+ /* Reset the page selec to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+ break;
+ case M88E1112_E_PHY_ID:
+ /* Remember the original page select and set it to 5 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length +
+ phy->max_cable_length) / 2;
+
+ /* Reset the page select to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * received signal, adjusting for the attenuation produced by the
+ * cable. By reading the AGC registers, which represent the
+ * combination of coarse and fine gain value, the value can be put
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data, i, agc_value = 0;
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Getting bits 15:9, which represent the combination of
+ * coarse and fine gain values. The result is a number
+ * that can be put into the lookup table to obtain the
+ * approximate cable length.
+ */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0)) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * to verify that link is up. Read the PHY special control register to
+ * determine the polarity and 10base-T extended distance. Read the PHY
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ if (phy->media_type != e1000_media_type_copper) {
+ hw_dbg("Phy info is only valid for copper media\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+ ? true : false;
+
+ ret_val = igb_check_polarity_m88(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ /* Set values to "undefined" */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_igp(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
+s32 igb_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_ctrl;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= MII_CR_RESET;
+ ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * semaphore (if necessary) and read/set/write the device control reset
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and release the semaphore (if necessary).
+ **/
+s32 igb_phy_hw_reset(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl;
+
+ ret_val = igb_check_reset_block(hw);
+ if (ret_val) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+ wrfl();
+
+ udelay(phy->reset_delay_us);
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ udelay(150);
+
+ phy->ops.release(hw);
+
+ ret_val = phy->ops.get_cfg_done(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ hw_dbg("Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to TX amplitude in Giga mode */
+ hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+ /* Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+ /* Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
+/**
+ * igb_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, restore the link to previous settings.
+ **/
+void igb_power_up_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igb_power_down_phy_copper - Power down copper PHY
+ * @hw: pointer to the HW structure
+ *
+ * Power down PHY to save power when interface is down and wake on lan
+ * is not enabled.
+ **/
+void igb_power_down_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+ usleep_range(1000, 2000);
+}
+
+/**
+ * igb_check_polarity_82580 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Clear Auto-Crossover to force MDI manually. 82580 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
+
+ ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_82580 - Retrieve I82580 PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_82580(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
+
+ if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
+ I82580_PHY_STATUS2_SPEED_1000MBPS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_82580 - Determine cable length for 82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igb_get_cable_length_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, length;
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
+ I82580_DSTATUS_CABLE_LENGTH_SHIFT;
+
+ if (length == E1000_CABLE_LENGTH_UNDEFINED)
+ ret_val = -E1000_ERR_PHY;
+
+ phy->cable_length = length;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+ *
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Master/slave mode
+ **/
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Resolve Master/Slave mode */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (hw->phy.ms_type) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ /* fall-through */
+ default:
+ break;
+ }
+
+ return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_phy-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,174 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+enum e1000_ms_type {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+};
+
+s32 igb_check_downshift(struct e1000_hw *hw);
+s32 igb_check_reset_block(struct e1000_hw *hw);
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 igb_get_phy_id(struct e1000_hw *hw);
+s32 igb_get_phy_info_igp(struct e1000_hw *hw);
+s32 igb_get_phy_info_m88(struct e1000_hw *hw);
+s32 igb_phy_sw_reset(struct e1000_hw *hw);
+s32 igb_phy_hw_reset(struct e1000_hw *hw);
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 igb_setup_copper_link(struct e1000_hw *hw);
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+void igb_power_up_phy_copper(struct e1000_hw *hw);
+void igb_power_down_phy_copper(struct e1000_hw *hw);
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw);
+s32 igb_get_phy_info_82580(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
+s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_check_polarity_m88(struct e1000_hw *hw);
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+#define I82580_ADDR_REG 16
+#define I82580_CFG_REG 22
+#define I82580_CFG_ASSERT_CRS_ON_TX (1 << 15)
+#define I82580_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
+#define I82580_CTRL_REG 23
+#define I82580_CTRL_DOWNSHIFT_MASK (7 << 10)
+
+/* 82580 specific PHY registers */
+#define I82580_PHY_CTRL_2 18
+#define I82580_PHY_LBK_CTRL 19
+#define I82580_PHY_STATUS_2 26
+#define I82580_PHY_DIAG_STATUS 31
+
+/* I82580 PHY Status 2 */
+#define I82580_PHY_STATUS2_REV_POLARITY 0x0400
+#define I82580_PHY_STATUS2_MDIX 0x0800
+#define I82580_PHY_STATUS2_SPEED_MASK 0x0300
+#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82580_PHY_STATUS2_SPEED_100MBPS 0x0100
+
+/* I82580 PHY Control 2 */
+#define I82580_PHY_CTRL2_MANUAL_MDIX 0x0200
+#define I82580_PHY_CTRL2_AUTO_MDI_MDIX 0x0400
+#define I82580_PHY_CTRL2_MDIX_CFG_MASK 0x0600
+
+/* I82580 PHY Diagnostics Status */
+#define I82580_DSTATUS_CABLE_LENGTH 0x03FC
+#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* 82580 PHY Power Management */
+#define E1000_82580_PHY_POWER_MGMT 0xE14
+#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */
+#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */
+#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */
+#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */
+
+/* Enable flexible speed on link-up */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+/* GS40G - I210 PHY defines */
+#define GS40G_PAGE_SELECT 0x16
+#define GS40G_PAGE_SHIFT 16
+#define GS40G_OFFSET_MASK 0xFFFF
+#define GS40G_PAGE_2 0x20000
+#define GS40G_MAC_REG2 0x15
+#define GS40G_MAC_LB 0x4140
+#define GS40G_MAC_SPEED_1G 0X0006
+#define GS40G_COPPER_SPEC 0x0010
+#define GS40G_LINE_LB 0x4000
+
+/* SFP modules ID memory locations */
+#define E1000_SFF_IDENTIFIER_OFFSET 0x00
+#define E1000_SFF_IDENTIFIER_SFF 0x02
+#define E1000_SFF_IDENTIFIER_SFP 0x03
+
+#define E1000_SFF_ETH_FLAGS_OFFSET 0x06
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct e1000_sfp_flags {
+ u8 e1000_base_sx:1;
+ u8 e1000_base_lx:1;
+ u8 e1000_base_cx:1;
+ u8 e1000_base_t:1;
+ u8 e100_base_lx:1;
+ u8 e100_base_fx:1;
+ u8 e10_base_bx10:1;
+ u8 e10_base_px:1;
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_phy-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,2511 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
+static s32 igb_wait_autoneg(struct e1000_hw *hw);
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_m88_cable_length_table) / \
+ sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_igp_2_cable_length_table) / \
+ sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ * igb_check_reset_block - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return 0, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
+s32 igb_check_reset_block(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ manc = rd32(E1000_MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ * igb_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+s32 igb_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+
+ ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.write_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /* Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ wr32(E1000_MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Read did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ *data = (u16) mdic;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /* Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ wr32(E1000_MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Write did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_i2c - Read PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the i2c interface and stores the
+ * retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+
+ /* Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ (E1000_I2CCMD_OPCODE_READ));
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Need to byte-swap the 16-bit value. */
+ *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+ return 0;
+}
+
+/**
+ * igb_write_phy_reg_i2c - Write PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+ u16 phy_data_swapped;
+
+ /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
+ if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
+ hw_dbg("PHY I2C Address %d is out of range.\n",
+ hw->phy.addr);
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Swap the data bytes for the I2C interface */
+ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+ /* Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_WRITE |
+ phy_data_swapped);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_sfp_data_byte - Reads SFP module data.
+ * @hw: pointer to the HW structure
+ * @offset: byte location offset to be read
+ * @data: read data buffer pointer
+ *
+ * Reads one byte from SFP module data stored
+ * in SFP resided EEPROM memory or SFP diagnostic area.
+ * Function should be called with
+ * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
+ * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
+ * access
+ **/
+s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
+{
+ u32 i = 0;
+ u32 i2ccmd = 0;
+ u32 data_local = 0;
+
+ if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
+ hw_dbg("I2CCMD command address exceeds upper limit\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Set up Op-code, EEPROM Address,in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * EEPROM to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_READ);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ data_local = rd32(E1000_I2CCMD);
+ if (data_local & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(data_local & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (data_local & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+ *data = (u8) data_local & 0xFF;
+
+ return 0;
+}
+
+/**
+ * igb_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (phy->type == e1000_phy_82580) {
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
+
+ /* Enable downshift */
+ phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
+
+ ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Set MDI/MDIX mode */
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ goto out;
+ phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
+ /* Options:
+ * 0 - Auto (default)
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ */
+ switch (hw->phy.mdix) {
+ case 1:
+ break;
+ case 2:
+ phy_data |= I82580_PHY_CTRL2_MANUAL_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= I82580_PHY_CTRL2_AUTO_MDI_MDIX;
+ break;
+ }
+ ret_val = hw->phy.ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ if (phy->revision < E1000_REVISION_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((phy->revision == E1000_REVISION_2) &&
+ (phy->id == M88E1111_I_PHY_ID)) {
+ /* 82573L PHY - set the downshift counter to 5x. */
+ phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ * Also enables and sets the downshift parameters.
+ **/
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable)
+ return 0;
+
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ /* M88E1112 does not support this mode) */
+ if (phy->id != M88E1112_E_PHY_ID) {
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ }
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ /* Enable downshift and setting it to X6 */
+ if (phy->id == M88E1543_E_PHY_ID) {
+ phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE;
+ ret_val =
+ phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+ }
+
+ phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+ ret_val = igb_set_master_slave_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ return 0;
+}
+
+/**
+ * igb_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+
+ /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
+ msleep(100);
+
+ /* The NVM settings will configure LPLU in D3 for
+ * non-IGP1 PHYs.
+ */
+ if (phy->type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ if (phy->ops.set_d3_lplu_state)
+ ret_val = phy->ops.set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D3\n");
+ goto out;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = phy->ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D0\n");
+ goto out;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (phy->mdix) {
+ case 1:
+ data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ /* set auto-master slave resolution settings */
+ if (hw->mac.autoneg) {
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default.
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Set auto Master/Slave resolution process */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~CR_1000T_MS_ENABLE;
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ /* load defaults for future use */
+ phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+ ((data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy->ms_type) {
+ case e1000_ms_force_master:
+ data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ data |= CR_1000T_MS_ENABLE;
+ data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_autoneg - Setup/Enable autoneg for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Performs initial bounds checking on autoneg advertisement parameter, then
+ * configure to advertise the full capability. Setup the PHY to autoneg
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ /* Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ */
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
+ hw_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = igb_phy_setup_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error Setting up Auto-Negotiation\n");
+ goto out;
+ }
+ hw_dbg("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = igb_wait_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error while waiting for autoneg to complete\n");
+ goto out;
+ }
+ }
+
+ hw->mac.get_link_status = true;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_setup_autoneg - Configure PHY for auto-negotiation
+ * @hw: pointer to the HW structure
+ *
+ * Reads the MII auto-neg advertisement register and/or the 1000T control
+ * register and if the PHY is already setup for auto-negotiation, then
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+ &mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+ NWAY_AR_100TX_HD_CAPS |
+ NWAY_AR_10T_FD_CAPS |
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+ hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+ hw_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+ hw_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+ hw_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+ hw_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+ hw_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+ hw_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+ * negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause:
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause:
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full:
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ ret_val = phy->ops.write_reg(hw,
+ PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * speed and duplex. Then we check for link, once link is established calls
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ bool link;
+
+ if (hw->mac.autoneg) {
+ /* Setup autoneg and flow control advertisement and perform
+ * autonegotiation.
+ */
+ ret_val = igb_copper_link_autoneg(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
+ hw_dbg("Forcing Speed and Duplex\n");
+ ret_val = hw->phy.ops.force_speed_duplex(hw);
+ if (ret_val) {
+ hw_dbg("Error Forcing Speed and Duplex\n");
+ goto out;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
+ if (ret_val)
+ goto out;
+
+ if (link) {
+ hw_dbg("Valid link established!!!\n");
+ igb_config_collision_dist(hw);
+ ret_val = igb_config_fc_after_link_up(hw);
+ } else {
+ hw_dbg("Unable to establish link!!!\n");
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("IGP PSCR: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 10000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 10000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Resets the PHY to commit the
+ * changes. If time expires while waiting for link up, we reset the DSP.
+ * After reset, TX_CLK and CRS on TX must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /* I210 and I211 devices support Auto-Crossover in forced operation. */
+ if (phy->type != e1000_phy_i210) {
+ /* Clear Auto-Crossover to force MDI manually. M88E1000
+ * requires MDI forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("M88E1000 PSCR: %X\n", phy_data);
+ }
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Reset the phy to commit changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ bool reset_dsp = true;
+
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case I210_I_PHY_ID:
+ reset_dsp = false;
+ break;
+ default:
+ if (hw->phy.type != e1000_phy_m88)
+ reset_dsp = false;
+ break;
+ }
+ if (!reset_dsp)
+ hw_dbg("Link taking longer than expected.\n");
+ else {
+ /* We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = phy->ops.write_reg(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ goto out;
+ ret_val = igb_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+ if (hw->phy.type != e1000_phy_m88 ||
+ hw->phy.id == I347AT4_E_PHY_ID ||
+ hw->phy.id == M88E1112_E_PHY_ID ||
+ hw->phy.id == I210_I_PHY_ID)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Resetting the phy means we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock from
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * Forces speed and duplex on the PHY by doing the following: disable flow
+ * control, force speed/duplex on the MAC, disable auto speed detection,
+ * disable auto-negotiation, configure duplex, configure speed, configure
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
+ /* Turn off flow control when forcing speed/duplex */
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ /* Disable Auto Speed Detection */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Disable autoneg on the phy */
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Forcing Full or Half Duplex? */
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ hw_dbg("Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ hw_dbg("Forcing 10mb\n");
+ }
+
+ igb_config_collision_dist(hw);
+
+ wr32(E1000_CTRL, ctrl);
+}
+
+/**
+ * igb_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 data;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_downshift - Checks whether a downshift in speed occurred
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
+s32 igb_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ switch (phy->type) {
+ case e1000_phy_i210:
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ case e1000_phy_igp_2:
+ case e1000_phy_igp:
+ case e1000_phy_igp_3:
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ break;
+ default:
+ /* speed downshift not supported */
+ phy->speed_downgraded = false;
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask) ? true : false;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_m88 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+s32 igb_check_polarity_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_igp - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY port status register, and the
+ * current speed (since there is no polarity at 100Mbps).
+ **/
+static s32 igb_check_polarity_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data, offset, mask;
+
+ /* Polarity is determined based on the speed of
+ * our connection.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
+ } else {
+ /* This really only applies to 10Mbps since
+ * there is no polarity for 100Mbps (always 0).
+ */
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_wait_autoneg - Wait for auto-neg completion
+ * @hw: pointer to the HW structure
+ *
+ * Waits for auto-negotiation to complete or for the auto-negotiation time
+ * limit to expire, which ever happens first.
+ **/
+static s32 igb_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
+ msleep(100);
+ }
+
+ /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ * has completed.
+ */
+ return ret_val;
+}
+
+/**
+ * igb_phy_has_link - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ * @success: pointer to whether polling was successful or not
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ for (i = 0; i < iterations; i++) {
+ /* Some PHYs require the PHY_STATUS register to be read
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val && usec_interval > 0) {
+ /* If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+
+ *success = (i < iterations) ? true : false;
+
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * information. The cable length is determined by averaging the minimum and
+ * maximum values to get the "average" cable length. The m88 PHY has four
+ * possible cable length values, which are:
+ * Register Value Cable Length
+ * 0 < 50 meters
+ * 1 50 - 80 meters
+ * 2 80 - 110 meters
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
+s32 igb_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, phy_data2, index, default_page, is_cm;
+
+ switch (hw->phy.id) {
+ case I210_I_PHY_ID:
+ /* Get cable length from PHY Cable Diagnostics Control Reg */
+ ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+ (I347AT4_PCDL + phy->addr),
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check if the unit of cable length is meters or cm */
+ ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
+ I347AT4_PCDC, &phy_data2);
+ if (ret_val)
+ return ret_val;
+
+ is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+ /* Populate the phy structure with cable length in meters */
+ phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->cable_length = phy_data / (is_cm ? 100 : 1);
+ break;
+ case M88E1543_E_PHY_ID:
+ case I347AT4_E_PHY_ID:
+ /* Remember the original page select and set it to 7 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+ if (ret_val)
+ goto out;
+
+ /* Get cable length from PHY Cable Diagnostics Control Reg */
+ ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Check if the unit of cable length is meters or cm */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+ if (ret_val)
+ goto out;
+
+ is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+ /* Populate the phy structure with cable length in meters */
+ phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+ /* Reset the page selec to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+ break;
+ case M88E1112_E_PHY_ID:
+ /* Remember the original page select and set it to 5 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length +
+ phy->max_cable_length) / 2;
+
+ /* Reset the page select to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * received signal, adjusting for the attenuation produced by the
+ * cable. By reading the AGC registers, which represent the
+ * combination of coarse and fine gain value, the value can be put
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data, i, agc_value = 0;
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Getting bits 15:9, which represent the combination of
+ * coarse and fine gain values. The result is a number
+ * that can be put into the lookup table to obtain the
+ * approximate cable length.
+ */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0)) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * to verify that link is up. Read the PHY special control register to
+ * determine the polarity and 10base-T extended distance. Read the PHY
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ if (phy->media_type != e1000_media_type_copper) {
+ hw_dbg("Phy info is only valid for copper media\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+ ? true : false;
+
+ ret_val = igb_check_polarity_m88(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ /* Set values to "undefined" */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_igp(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
+s32 igb_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_ctrl;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= MII_CR_RESET;
+ ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * semaphore (if necessary) and read/set/write the device control reset
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and release the semaphore (if necessary).
+ **/
+s32 igb_phy_hw_reset(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl;
+
+ ret_val = igb_check_reset_block(hw);
+ if (ret_val) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+ wrfl();
+
+ udelay(phy->reset_delay_us);
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ udelay(150);
+
+ phy->ops.release(hw);
+
+ ret_val = phy->ops.get_cfg_done(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ hw_dbg("Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to TX amplitude in Giga mode */
+ hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+ /* Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+ /* Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
+/**
+ * igb_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, restore the link to previous settings.
+ **/
+void igb_power_up_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igb_power_down_phy_copper - Power down copper PHY
+ * @hw: pointer to the HW structure
+ *
+ * Power down PHY to save power when interface is down and wake on lan
+ * is not enabled.
+ **/
+void igb_power_down_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+ usleep_range(1000, 2000);
+}
+
+/**
+ * igb_check_polarity_82580 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Clear Auto-Crossover to force MDI manually. 82580 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
+
+ ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_82580 - Retrieve I82580 PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_82580(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
+
+ if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
+ I82580_PHY_STATUS2_SPEED_1000MBPS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_82580 - Determine cable length for 82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igb_get_cable_length_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, length;
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
+ I82580_DSTATUS_CABLE_LENGTH_SHIFT;
+
+ if (length == E1000_CABLE_LENGTH_UNDEFINED)
+ ret_val = -E1000_ERR_PHY;
+
+ phy->cable_length = length;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to write to
+ * upper half is page to use.
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
+ * @hw: pointer to the HW structure
+ * @offset: lower half is register offset to read to
+ * upper half is page to use.
+ * @data: data to read at register offset
+ *
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = offset >> GS40G_PAGE_SHIFT;
+
+ offset = offset & GS40G_OFFSET_MASK;
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
+ if (ret_val)
+ goto release;
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+release:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * igb_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Master/slave mode
+ **/
+static s32 igb_set_master_slave_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Resolve Master/Slave mode */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (hw->phy.ms_type) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ /* fall-through */
+ default:
+ break;
+ }
+
+ return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_phy-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,174 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+enum e1000_ms_type {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+};
+
+s32 igb_check_downshift(struct e1000_hw *hw);
+s32 igb_check_reset_block(struct e1000_hw *hw);
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 igb_get_phy_id(struct e1000_hw *hw);
+s32 igb_get_phy_info_igp(struct e1000_hw *hw);
+s32 igb_get_phy_info_m88(struct e1000_hw *hw);
+s32 igb_phy_sw_reset(struct e1000_hw *hw);
+s32 igb_phy_hw_reset(struct e1000_hw *hw);
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 igb_setup_copper_link(struct e1000_hw *hw);
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+void igb_power_up_phy_copper(struct e1000_hw *hw);
+void igb_power_down_phy_copper(struct e1000_hw *hw);
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw);
+s32 igb_get_phy_info_82580(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
+s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_check_polarity_m88(struct e1000_hw *hw);
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+#define I82580_ADDR_REG 16
+#define I82580_CFG_REG 22
+#define I82580_CFG_ASSERT_CRS_ON_TX (1 << 15)
+#define I82580_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
+#define I82580_CTRL_REG 23
+#define I82580_CTRL_DOWNSHIFT_MASK (7 << 10)
+
+/* 82580 specific PHY registers */
+#define I82580_PHY_CTRL_2 18
+#define I82580_PHY_LBK_CTRL 19
+#define I82580_PHY_STATUS_2 26
+#define I82580_PHY_DIAG_STATUS 31
+
+/* I82580 PHY Status 2 */
+#define I82580_PHY_STATUS2_REV_POLARITY 0x0400
+#define I82580_PHY_STATUS2_MDIX 0x0800
+#define I82580_PHY_STATUS2_SPEED_MASK 0x0300
+#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82580_PHY_STATUS2_SPEED_100MBPS 0x0100
+
+/* I82580 PHY Control 2 */
+#define I82580_PHY_CTRL2_MANUAL_MDIX 0x0200
+#define I82580_PHY_CTRL2_AUTO_MDI_MDIX 0x0400
+#define I82580_PHY_CTRL2_MDIX_CFG_MASK 0x0600
+
+/* I82580 PHY Diagnostics Status */
+#define I82580_DSTATUS_CABLE_LENGTH 0x03FC
+#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* 82580 PHY Power Management */
+#define E1000_82580_PHY_POWER_MGMT 0xE14
+#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */
+#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */
+#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */
+#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */
+
+/* Enable flexible speed on link-up */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+/* GS40G - I210 PHY defines */
+#define GS40G_PAGE_SELECT 0x16
+#define GS40G_PAGE_SHIFT 16
+#define GS40G_OFFSET_MASK 0xFFFF
+#define GS40G_PAGE_2 0x20000
+#define GS40G_MAC_REG2 0x15
+#define GS40G_MAC_LB 0x4140
+#define GS40G_MAC_SPEED_1G 0X0006
+#define GS40G_COPPER_SPEC 0x0010
+#define GS40G_LINE_LB 0x4000
+
+/* SFP modules ID memory locations */
+#define E1000_SFF_IDENTIFIER_OFFSET 0x00
+#define E1000_SFF_IDENTIFIER_SFF 0x02
+#define E1000_SFF_IDENTIFIER_SFP 0x03
+
+#define E1000_SFF_ETH_FLAGS_OFFSET 0x06
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct e1000_sfp_flags {
+ u8 e1000_base_sx:1;
+ u8 e1000_base_lx:1;
+ u8 e1000_base_cx:1;
+ u8 e1000_base_t:1;
+ u8 e100_base_lx:1;
+ u8 e100_base_fx:1;
+ u8 e10_base_bx10:1;
+ u8 e10_base_px:1;
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_regs-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,426 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_TSSDP 0x0003C /* Time Sync SDP Configuration Register - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_LEDMUX 0x08130 /* LED MUX Control */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */
+#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */
+#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */
+#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */
+#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */
+
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_TRGTTIML0 0x0B644 /* Target Time Register 0 Low - RW */
+#define E1000_TRGTTIMH0 0x0B648 /* Target Time Register 0 High - RW */
+#define E1000_TRGTTIML1 0x0B64C /* Target Time Register 1 Low - RW */
+#define E1000_TRGTTIMH1 0x0B650 /* Target Time Register 1 High - RW */
+#define E1000_AUXSTMPL0 0x0B65C /* Auxiliary Time Stamp 0 Register Low - RO */
+#define E1000_AUXSTMPH0 0x0B660 /* Auxiliary Time Stamp 0 Register High - RO */
+#define E1000_AUXSTMPL1 0x0B664 /* Auxiliary Time Stamp 1 Register Low - RO */
+#define E1000_AUXSTMPH1 0x0B668 /* Auxiliary Time Stamp 1 Register High - RO */
+#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */
+#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */
+#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */
+
+/* Filtering Registers */
+#define E1000_SAQF(_n) (0x5980 + 4 * (_n))
+#define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
+#define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
+#define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
+#define E1000_SAQF0 E1000_SAQF(0)
+#define E1000_DAQF0 E1000_DAQF(0)
+#define E1000_SPQF0 E1000_SPQF(0)
+#define E1000_FTQF0 E1000_FTQF(0)
+#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
+#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
+/* DMA Coalescing registers */
+#define E1000_DMACR 0x02508 /* Control Register */
+#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
+#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
+#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
+#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
+#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* TX Rate Limit Registers */
+#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
+#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */
+#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
+
+/* Split and Replication RX Control - RW */
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+
+/* Thermal sensor configuration and status registers */
+#define E1000_THMJT 0x08100 /* Junction Temperature */
+#define E1000_THLOWTC 0x08104 /* Low Threshold Control */
+#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */
+#define E1000_THHIGHTC 0x0810C /* High Threshold Control */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
+/* Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
+ : (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
+ : (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
+ : (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
+ : (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
+ : (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
+ : (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
+ : (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
+ : (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
+ : (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
+ : (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
+ : (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
+ : (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
+ : (0x0E028 + ((_n) * 0x40)))
+#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \
+ (0x0C014 + ((_n) * 0x40)))
+#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n)
+#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \
+ (0x0E014 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n)
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
+ : (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
+ : (0x0E03C + ((_n) * 0x40)))
+
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
+
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXPTC 0x04104
+/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICRXATC 0x04108
+/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C
+/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXATC 0x04110
+/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQEC 0x04118
+/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICTXQMTC 0x0411C
+/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
+#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
+
+/* RSS registers */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
+/* MSI-X Allocation Register (_i) - RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
+/* Redirection Table - RW Array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
+
+/* VT Registers */
+#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
+#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
+#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
+#define E1000_VFRE 0x00C8C /* VF Receive Enables */
+#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
+#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
+#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
+#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
+#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
+#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
+#define E1000_TXSWC 0x05ACC /* Tx Switch Control */
+#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */
+/* These act per VF so an array friendly macro is used */
+#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
+#define E1000_DVMOLR(_n) (0x0C038 + (64 * (_n)))
+#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN VM Filter */
+#define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
+
+struct e1000_hw;
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg);
+
+/* write operations, indexed using DWORDS */
+#define wr32(reg, val) \
+do { \
+ u8 __iomem *hw_addr = ACCESS_ONCE((hw)->hw_addr); \
+ if (!E1000_REMOVED(hw_addr)) \
+ writel((val), &hw_addr[(reg)]); \
+} while (0)
+
+#define rd32(reg) (igb_rd32(hw, reg))
+
+#define wrfl() ((void)rd32(E1000_STATUS))
+
+#define array_wr32(reg, offset, value) \
+ wr32((reg) + ((offset) << 2), (value))
+
+#define array_rd32(reg, offset) \
+ (readl(hw->hw_addr + reg + ((offset) << 2)))
+
+/* DMA Coalescing registers */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* Energy Efficient Ethernet "EEE" register */
+#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
+#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
+#define E1000_EEE_SU 0X0E34 /* EEE Setup */
+#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */
+#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */
+#define E1000_MMDAC 13 /* MMD Access Control */
+#define E1000_MMDAAD 14 /* MMD Access Address/Data */
+
+/* Thermal Sensor Register */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
+/* OS2BMC Registers */
+#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
+
+#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */
+#define E1000_I210_FLMNGCTL 0x12038
+#define E1000_I210_FLMNGDATA 0x1203C
+#define E1000_I210_FLMNGCNT 0x12040
+
+#define E1000_I210_FLSWCTL 0x12048
+#define E1000_I210_FLSWDATA 0x1204C
+#define E1000_I210_FLSWCNT 0x12050
+
+#define E1000_I210_FLA 0x1201C
+
+#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n))
+#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */
+
+#define E1000_REMOVED(h) unlikely(!(h))
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/e1000_regs-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,426 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_TSSDP 0x0003C /* Time Sync SDP Configuration Register - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_LEDMUX 0x08130 /* LED MUX Control */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */
+#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */
+#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */
+#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */
+#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */
+
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_TRGTTIML0 0x0B644 /* Target Time Register 0 Low - RW */
+#define E1000_TRGTTIMH0 0x0B648 /* Target Time Register 0 High - RW */
+#define E1000_TRGTTIML1 0x0B64C /* Target Time Register 1 Low - RW */
+#define E1000_TRGTTIMH1 0x0B650 /* Target Time Register 1 High - RW */
+#define E1000_AUXSTMPL0 0x0B65C /* Auxiliary Time Stamp 0 Register Low - RO */
+#define E1000_AUXSTMPH0 0x0B660 /* Auxiliary Time Stamp 0 Register High - RO */
+#define E1000_AUXSTMPL1 0x0B664 /* Auxiliary Time Stamp 1 Register Low - RO */
+#define E1000_AUXSTMPH1 0x0B668 /* Auxiliary Time Stamp 1 Register High - RO */
+#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */
+#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */
+#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */
+
+/* Filtering Registers */
+#define E1000_SAQF(_n) (0x5980 + 4 * (_n))
+#define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
+#define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
+#define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
+#define E1000_SAQF0 E1000_SAQF(0)
+#define E1000_DAQF0 E1000_DAQF(0)
+#define E1000_SPQF0 E1000_SPQF(0)
+#define E1000_FTQF0 E1000_FTQF(0)
+#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
+#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
+/* DMA Coalescing registers */
+#define E1000_DMACR 0x02508 /* Control Register */
+#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
+#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
+#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
+#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
+#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* TX Rate Limit Registers */
+#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
+#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */
+#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
+
+/* Split and Replication RX Control - RW */
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+
+/* Thermal sensor configuration and status registers */
+#define E1000_THMJT 0x08100 /* Junction Temperature */
+#define E1000_THLOWTC 0x08104 /* Low Threshold Control */
+#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */
+#define E1000_THHIGHTC 0x0810C /* High Threshold Control */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
+/* Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
+ : (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
+ : (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
+ : (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
+ : (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
+ : (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
+ : (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
+ : (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
+ : (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
+ : (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
+ : (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
+ : (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
+ : (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
+ : (0x0E028 + ((_n) * 0x40)))
+#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \
+ (0x0C014 + ((_n) * 0x40)))
+#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n)
+#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \
+ (0x0E014 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n)
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
+ : (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
+ : (0x0E03C + ((_n) * 0x40)))
+
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
+
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXPTC 0x04104
+/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICRXATC 0x04108
+/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C
+/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXATC 0x04110
+/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQEC 0x04118
+/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICTXQMTC 0x0411C
+/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
+#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
+
+/* RSS registers */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
+/* MSI-X Allocation Register (_i) - RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
+/* Redirection Table - RW Array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
+
+/* VT Registers */
+#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
+#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
+#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
+#define E1000_VFRE 0x00C8C /* VF Receive Enables */
+#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
+#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
+#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
+#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
+#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
+#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
+#define E1000_TXSWC 0x05ACC /* Tx Switch Control */
+#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */
+/* These act per VF so an array friendly macro is used */
+#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
+#define E1000_DVMOLR(_n) (0x0C038 + (64 * (_n)))
+#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN VM Filter */
+#define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
+
+struct e1000_hw;
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg);
+
+/* write operations, indexed using DWORDS */
+#define wr32(reg, val) \
+do { \
+ u8 __iomem *hw_addr = ACCESS_ONCE((hw)->hw_addr); \
+ if (!E1000_REMOVED(hw_addr)) \
+ writel((val), &hw_addr[(reg)]); \
+} while (0)
+
+#define rd32(reg) (igb_rd32(hw, reg))
+
+#define wrfl() ((void)rd32(E1000_STATUS))
+
+#define array_wr32(reg, offset, value) \
+ wr32((reg) + ((offset) << 2), (value))
+
+#define array_rd32(reg, offset) \
+ (readl(hw->hw_addr + reg + ((offset) << 2)))
+
+/* DMA Coalescing registers */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* Energy Efficient Ethernet "EEE" register */
+#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
+#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
+#define E1000_EEE_SU 0X0E34 /* EEE Setup */
+#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */
+#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */
+#define E1000_MMDAC 13 /* MMD Access Control */
+#define E1000_MMDAAD 14 /* MMD Access Address/Data */
+
+/* Thermal Sensor Register */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
+/* OS2BMC Registers */
+#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
+
+#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */
+#define E1000_I210_FLMNGCTL 0x12038
+#define E1000_I210_FLMNGDATA 0x1203C
+#define E1000_I210_FLMNGCNT 0x12040
+
+#define E1000_I210_FLSWCTL 0x12048
+#define E1000_I210_FLSWDATA 0x1204C
+#define E1000_I210_FLSWCNT 0x12050
+
+#define E1000_I210_FLA 0x1201C
+
+#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n))
+#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */
+
+#define E1000_REMOVED(h) unlikely(!(h))
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb-3.18-ethercat.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,575 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGB_H_
+#define _IGB_H_
+
+#include "e1000_mac-3.18-ethercat.h"
+#include "e1000_82575-3.18-ethercat.h"
+
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/pci.h>
+#include <linux/mdio.h>
+
+struct igb_adapter;
+
+#define E1000_PCS_CFG_IGN_SD 1
+
+/* Interrupt defines */
+#define IGB_START_ITR 648 /* ~6000 ints/sec */
+#define IGB_4K_ITR 980
+#define IGB_20K_ITR 196
+#define IGB_70K_ITR 56
+
+/* TX/RX descriptor defines */
+#define IGB_DEFAULT_TXD 256
+#define IGB_DEFAULT_TX_WORK 128
+#define IGB_MIN_TXD 80
+#define IGB_MAX_TXD 4096
+
+#define IGB_DEFAULT_RXD 256
+#define IGB_MIN_RXD 80
+#define IGB_MAX_RXD 4096
+
+#define IGB_DEFAULT_ITR 3 /* dynamic */
+#define IGB_MAX_ITR_USECS 10000
+#define IGB_MIN_ITR_USECS 10
+#define NON_Q_VECTORS 1
+#define MAX_Q_VECTORS 8
+#define MAX_MSIX_ENTRIES 10
+
+/* Transmit and receive queues */
+#define IGB_MAX_RX_QUEUES 8
+#define IGB_MAX_RX_QUEUES_82575 4
+#define IGB_MAX_RX_QUEUES_I211 2
+#define IGB_MAX_TX_QUEUES 8
+#define IGB_MAX_VF_MC_ENTRIES 30
+#define IGB_MAX_VF_FUNCTIONS 8
+#define IGB_MAX_VFTA_ENTRIES 128
+#define IGB_82576_VF_DEV_ID 0x10CA
+#define IGB_I350_VF_DEV_ID 0x1520
+
+/* NVM version defines */
+#define IGB_MAJOR_MASK 0xF000
+#define IGB_MINOR_MASK 0x0FF0
+#define IGB_BUILD_MASK 0x000F
+#define IGB_COMB_VER_MASK 0x00FF
+#define IGB_MAJOR_SHIFT 12
+#define IGB_MINOR_SHIFT 4
+#define IGB_COMB_VER_SHFT 8
+#define IGB_NVM_VER_INVALID 0xFFFF
+#define IGB_ETRACK_SHIFT 16
+#define NVM_ETRACK_WORD 0x0042
+#define NVM_COMB_VER_OFF 0x0083
+#define NVM_COMB_VER_PTR 0x003d
+
+struct vf_data_storage {
+ unsigned char vf_mac_addresses[ETH_ALEN];
+ u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
+ u16 num_vf_mc_hashes;
+ u16 vlans_enabled;
+ u32 flags;
+ unsigned long last_nack;
+ u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+ u16 pf_qos;
+ u16 tx_rate;
+ bool spoofchk_enabled;
+};
+
+#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */
+#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8)
+#define IGB_RX_HTHRESH 8
+#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
+#define IGB_TX_HTHRESH 1
+#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
+ (adapter->flags & IGB_FLAG_HAS_MSIX)) ? 1 : 4)
+#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \
+ (adapter->flags & IGB_FLAG_HAS_MSIX)) ? 1 : 16)
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define IGB_RXBUFFER_256 256
+#define IGB_RXBUFFER_2048 2048
+#define IGB_RX_HDR_LEN IGB_RXBUFFER_256
+#define IGB_RX_BUFSZ IGB_RXBUFFER_2048
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGB_EEPROM_APME 0x0400
+
+#ifndef IGB_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define IGB_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define IGB_MNG_VLAN_NONE -1
+
+enum igb_tx_flags {
+ /* cmd_type flags */
+ IGB_TX_FLAGS_VLAN = 0x01,
+ IGB_TX_FLAGS_TSO = 0x02,
+ IGB_TX_FLAGS_TSTAMP = 0x04,
+
+ /* olinfo flags */
+ IGB_TX_FLAGS_IPV4 = 0x10,
+ IGB_TX_FLAGS_CSUM = 0x20,
+};
+
+/* VLAN info */
+#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT 16
+
+/* The largest size we can write to the descriptor is 65535. In order to
+ * maintain a power of two alignment we have to limit ourselves to 32K.
+ */
+#define IGB_MAX_TXD_PWR 15
+#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD)
+#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+
+/* EEPROM byte offsets */
+#define IGB_SFF_8472_SWAP 0x5C
+#define IGB_SFF_8472_COMP 0x5E
+
+/* Bitmasks */
+#define IGB_SFF_ADDRESSING_MODE 0x4
+#define IGB_SFF_8472_UNSUP 0x00
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct igb_tx_buffer {
+ union e1000_adv_tx_desc *next_to_watch;
+ unsigned long time_stamp;
+ struct sk_buff *skb;
+ unsigned int bytecount;
+ u16 gso_segs;
+ __be16 protocol;
+
+ DEFINE_DMA_UNMAP_ADDR(dma);
+ DEFINE_DMA_UNMAP_LEN(len);
+ u32 tx_flags;
+};
+
+struct igb_rx_buffer {
+ dma_addr_t dma;
+ struct page *page;
+ unsigned int page_offset;
+};
+
+struct igb_tx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 restart_queue;
+ u64 restart_queue2;
+};
+
+struct igb_rx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 drops;
+ u64 csum_err;
+ u64 alloc_failed;
+};
+
+struct igb_ring_container {
+ struct igb_ring *ring; /* pointer to linked list of rings */
+ unsigned int total_bytes; /* total bytes processed this int */
+ unsigned int total_packets; /* total packets processed this int */
+ u16 work_limit; /* total work allowed per interrupt */
+ u8 count; /* total number of rings in vector */
+ u8 itr; /* current ITR setting for ring */
+};
+
+struct igb_ring {
+ struct igb_q_vector *q_vector; /* backlink to q_vector */
+ struct net_device *netdev; /* back pointer to net_device */
+ struct device *dev; /* device pointer for dma mapping */
+ union { /* array of buffer info structs */
+ struct igb_tx_buffer *tx_buffer_info;
+ struct igb_rx_buffer *rx_buffer_info;
+ };
+ void *desc; /* descriptor ring memory */
+ unsigned long flags; /* ring specific flags */
+ void __iomem *tail; /* pointer to ring tail register */
+ dma_addr_t dma; /* phys address of the ring */
+ unsigned int size; /* length of desc. ring in bytes */
+
+ u16 count; /* number of desc. in the ring */
+ u8 queue_index; /* logical index of the ring*/
+ u8 reg_idx; /* physical index of the ring */
+
+ /* everything past this point are written often */
+ u16 next_to_clean;
+ u16 next_to_use;
+ u16 next_to_alloc;
+
+ union {
+ /* TX */
+ struct {
+ struct igb_tx_queue_stats tx_stats;
+ struct u64_stats_sync tx_syncp;
+ struct u64_stats_sync tx_syncp2;
+ };
+ /* RX */
+ struct {
+ struct sk_buff *skb;
+ struct igb_rx_queue_stats rx_stats;
+ struct u64_stats_sync rx_syncp;
+ };
+ };
+} ____cacheline_internodealigned_in_smp;
+
+struct igb_q_vector {
+ struct igb_adapter *adapter; /* backlink */
+ int cpu; /* CPU for DCA */
+ u32 eims_value; /* EIMS mask value */
+
+ u16 itr_val;
+ u8 set_itr;
+ void __iomem *itr_register;
+
+ struct igb_ring_container rx, tx;
+
+ struct napi_struct napi;
+ struct rcu_head rcu; /* to avoid race with update stats on free */
+ char name[IFNAMSIZ + 9];
+
+ /* for dynamic allocation of rings associated with this q_vector */
+ struct igb_ring ring[0] ____cacheline_internodealigned_in_smp;
+};
+
+enum e1000_ring_flags_t {
+ IGB_RING_FLAG_RX_SCTP_CSUM,
+ IGB_RING_FLAG_RX_LB_VLAN_BSWAP,
+ IGB_RING_FLAG_TX_CTX_IDX,
+ IGB_RING_FLAG_TX_DETECT_HANG
+};
+
+#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS)
+
+#define IGB_RX_DESC(R, i) \
+ (&(((union e1000_adv_rx_desc *)((R)->desc))[i]))
+#define IGB_TX_DESC(R, i) \
+ (&(((union e1000_adv_tx_desc *)((R)->desc))[i]))
+#define IGB_TX_CTXTDESC(R, i) \
+ (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i]))
+
+/* igb_test_staterr - tests bits within Rx descriptor status and error fields */
+static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc,
+ const u32 stat_err_bits)
+{
+ return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits);
+}
+
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+#ifdef CONFIG_IGB_HWMON
+
+#define IGB_HWMON_TYPE_LOC 0
+#define IGB_HWMON_TYPE_TEMP 1
+#define IGB_HWMON_TYPE_CAUTION 2
+#define IGB_HWMON_TYPE_MAX 3
+
+struct hwmon_attr {
+ struct device_attribute dev_attr;
+ struct e1000_hw *hw;
+ struct e1000_thermal_diode_data *sensor;
+ char name[12];
+ };
+
+struct hwmon_buff {
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+ struct attribute *attrs[E1000_MAX_SENSORS * 4 + 1];
+ struct hwmon_attr hwmon_list[E1000_MAX_SENSORS * 4];
+ unsigned int n_hwmon;
+ };
+#endif
+
+#define IGB_RETA_SIZE 128
+
+/* board specific private data structure */
+struct igb_adapter {
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+ struct net_device *netdev;
+
+ unsigned long state;
+ unsigned int flags;
+
+ unsigned int num_q_vectors;
+ struct msix_entry msix_entries[MAX_MSIX_ENTRIES];
+
+ /* Interrupt Throttle Rate */
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /* TX */
+ u16 tx_work_limit;
+ u32 tx_timeout_count;
+ int num_tx_queues;
+ struct igb_ring *tx_ring[16];
+
+ /* RX */
+ int num_rx_queues;
+ struct igb_ring *rx_ring[16];
+
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 wol;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+ bool fc_autoneg;
+ u8 tx_timeout_factor;
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* OS defined structs */
+ struct pci_dev *pdev;
+
+ spinlock_t stats64_lock;
+ struct rtnl_link_stats64 stats64;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+
+ u32 test_icr;
+ struct igb_ring test_tx_ring;
+ struct igb_ring test_rx_ring;
+
+ int msg_enable;
+
+ struct igb_q_vector *q_vector[MAX_Q_VECTORS];
+ u32 eims_enable_mask;
+ u32 eims_other;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ u16 tx_ring_count;
+ u16 rx_ring_count;
+ unsigned int vfs_allocated_count;
+ struct vf_data_storage *vf_data;
+ int vf_rate_link_speed;
+ u32 rss_queues;
+ u32 wvbr;
+ u32 *shadow_vfta;
+
+ struct ptp_clock *ptp_clock;
+ struct ptp_clock_info ptp_caps;
+ struct delayed_work ptp_overflow_work;
+ struct work_struct ptp_tx_work;
+ struct sk_buff *ptp_tx_skb;
+ struct hwtstamp_config tstamp_config;
+ unsigned long ptp_tx_start;
+ unsigned long last_rx_ptp_check;
+ unsigned long last_rx_timestamp;
+ spinlock_t tmreg_lock;
+ struct cyclecounter cc;
+ struct timecounter tc;
+ u32 tx_hwtstamp_timeouts;
+ u32 rx_hwtstamp_cleared;
+
+ char fw_version[32];
+#ifdef CONFIG_IGB_HWMON
+ struct hwmon_buff *igb_hwmon_buff;
+ bool ets;
+#endif
+ struct i2c_algo_bit_data i2c_algo;
+ struct i2c_adapter i2c_adap;
+ struct i2c_client *i2c_client;
+ u32 rss_indir_tbl_init;
+ u8 rss_indir_tbl[IGB_RETA_SIZE];
+
+ unsigned long link_check_timeout;
+ int copper_tries;
+ struct e1000_info ei;
+ u16 eee_advert;
+};
+
+#define IGB_FLAG_HAS_MSI (1 << 0)
+#define IGB_FLAG_DCA_ENABLED (1 << 1)
+#define IGB_FLAG_QUAD_PORT_A (1 << 2)
+#define IGB_FLAG_QUEUE_PAIRS (1 << 3)
+#define IGB_FLAG_DMAC (1 << 4)
+#define IGB_FLAG_PTP (1 << 5)
+#define IGB_FLAG_RSS_FIELD_IPV4_UDP (1 << 6)
+#define IGB_FLAG_RSS_FIELD_IPV6_UDP (1 << 7)
+#define IGB_FLAG_WOL_SUPPORTED (1 << 8)
+#define IGB_FLAG_NEED_LINK_UPDATE (1 << 9)
+#define IGB_FLAG_MEDIA_RESET (1 << 10)
+#define IGB_FLAG_MAS_CAPABLE (1 << 11)
+#define IGB_FLAG_MAS_ENABLE (1 << 12)
+#define IGB_FLAG_HAS_MSIX (1 << 13)
+#define IGB_FLAG_EEE (1 << 14)
+
+/* Media Auto Sense */
+#define IGB_MAS_ENABLE_0 0X0001
+#define IGB_MAS_ENABLE_1 0X0002
+#define IGB_MAS_ENABLE_2 0X0004
+#define IGB_MAS_ENABLE_3 0X0008
+
+/* DMA Coalescing defines */
+#define IGB_MIN_TXPBSIZE 20408
+#define IGB_TX_BUF_4096 4096
+#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */
+
+#define IGB_82576_TSYNC_SHIFT 19
+#define IGB_TS_HDR_LEN 16
+enum e1000_state_t {
+ __IGB_TESTING,
+ __IGB_RESETTING,
+ __IGB_DOWN,
+ __IGB_PTP_TX_IN_PROGRESS,
+};
+
+enum igb_boards {
+ board_82575,
+};
+
+extern char igb_driver_name[];
+extern char igb_driver_version[];
+
+int igb_up(struct igb_adapter *);
+void igb_down(struct igb_adapter *);
+void igb_reinit_locked(struct igb_adapter *);
+void igb_reset(struct igb_adapter *);
+int igb_reinit_queues(struct igb_adapter *);
+void igb_write_rss_indir_tbl(struct igb_adapter *);
+int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
+int igb_setup_tx_resources(struct igb_ring *);
+int igb_setup_rx_resources(struct igb_ring *);
+void igb_free_tx_resources(struct igb_ring *);
+void igb_free_rx_resources(struct igb_ring *);
+void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+void igb_setup_tctl(struct igb_adapter *);
+void igb_setup_rctl(struct igb_adapter *);
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *);
+void igb_unmap_and_free_tx_resource(struct igb_ring *, struct igb_tx_buffer *);
+void igb_alloc_rx_buffers(struct igb_ring *, u16);
+void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
+bool igb_has_link(struct igb_adapter *adapter);
+void igb_set_ethtool_ops(struct net_device *);
+void igb_power_up_link(struct igb_adapter *);
+void igb_set_fw_version(struct igb_adapter *);
+void igb_ptp_init(struct igb_adapter *adapter);
+void igb_ptp_stop(struct igb_adapter *adapter);
+void igb_ptp_reset(struct igb_adapter *adapter);
+void igb_ptp_rx_hang(struct igb_adapter *adapter);
+void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb);
+void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va,
+ struct sk_buff *skb);
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr);
+#ifdef CONFIG_IGB_HWMON
+void igb_sysfs_exit(struct igb_adapter *adapter);
+int igb_sysfs_init(struct igb_adapter *adapter);
+#endif
+static inline s32 igb_reset_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.reset)
+ return hw->phy.ops.reset(hw);
+
+ return 0;
+}
+
+static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ if (hw->phy.ops.read_reg)
+ return hw->phy.ops.read_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ if (hw->phy.ops.write_reg)
+ return hw->phy.ops.write_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_get_phy_info(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.get_phy_info)
+ return hw->phy.ops.get_phy_info(hw);
+
+ return 0;
+}
+
+static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring)
+{
+ return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index);
+}
+
+#endif /* _IGB_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb-3.18-orig.h Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,575 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGB_H_
+#define _IGB_H_
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/pci.h>
+#include <linux/mdio.h>
+
+struct igb_adapter;
+
+#define E1000_PCS_CFG_IGN_SD 1
+
+/* Interrupt defines */
+#define IGB_START_ITR 648 /* ~6000 ints/sec */
+#define IGB_4K_ITR 980
+#define IGB_20K_ITR 196
+#define IGB_70K_ITR 56
+
+/* TX/RX descriptor defines */
+#define IGB_DEFAULT_TXD 256
+#define IGB_DEFAULT_TX_WORK 128
+#define IGB_MIN_TXD 80
+#define IGB_MAX_TXD 4096
+
+#define IGB_DEFAULT_RXD 256
+#define IGB_MIN_RXD 80
+#define IGB_MAX_RXD 4096
+
+#define IGB_DEFAULT_ITR 3 /* dynamic */
+#define IGB_MAX_ITR_USECS 10000
+#define IGB_MIN_ITR_USECS 10
+#define NON_Q_VECTORS 1
+#define MAX_Q_VECTORS 8
+#define MAX_MSIX_ENTRIES 10
+
+/* Transmit and receive queues */
+#define IGB_MAX_RX_QUEUES 8
+#define IGB_MAX_RX_QUEUES_82575 4
+#define IGB_MAX_RX_QUEUES_I211 2
+#define IGB_MAX_TX_QUEUES 8
+#define IGB_MAX_VF_MC_ENTRIES 30
+#define IGB_MAX_VF_FUNCTIONS 8
+#define IGB_MAX_VFTA_ENTRIES 128
+#define IGB_82576_VF_DEV_ID 0x10CA
+#define IGB_I350_VF_DEV_ID 0x1520
+
+/* NVM version defines */
+#define IGB_MAJOR_MASK 0xF000
+#define IGB_MINOR_MASK 0x0FF0
+#define IGB_BUILD_MASK 0x000F
+#define IGB_COMB_VER_MASK 0x00FF
+#define IGB_MAJOR_SHIFT 12
+#define IGB_MINOR_SHIFT 4
+#define IGB_COMB_VER_SHFT 8
+#define IGB_NVM_VER_INVALID 0xFFFF
+#define IGB_ETRACK_SHIFT 16
+#define NVM_ETRACK_WORD 0x0042
+#define NVM_COMB_VER_OFF 0x0083
+#define NVM_COMB_VER_PTR 0x003d
+
+struct vf_data_storage {
+ unsigned char vf_mac_addresses[ETH_ALEN];
+ u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
+ u16 num_vf_mc_hashes;
+ u16 vlans_enabled;
+ u32 flags;
+ unsigned long last_nack;
+ u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+ u16 pf_qos;
+ u16 tx_rate;
+ bool spoofchk_enabled;
+};
+
+#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */
+#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8)
+#define IGB_RX_HTHRESH 8
+#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
+#define IGB_TX_HTHRESH 1
+#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
+ (adapter->flags & IGB_FLAG_HAS_MSIX)) ? 1 : 4)
+#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \
+ (adapter->flags & IGB_FLAG_HAS_MSIX)) ? 1 : 16)
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define IGB_RXBUFFER_256 256
+#define IGB_RXBUFFER_2048 2048
+#define IGB_RX_HDR_LEN IGB_RXBUFFER_256
+#define IGB_RX_BUFSZ IGB_RXBUFFER_2048
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGB_EEPROM_APME 0x0400
+
+#ifndef IGB_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define IGB_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define IGB_MNG_VLAN_NONE -1
+
+enum igb_tx_flags {
+ /* cmd_type flags */
+ IGB_TX_FLAGS_VLAN = 0x01,
+ IGB_TX_FLAGS_TSO = 0x02,
+ IGB_TX_FLAGS_TSTAMP = 0x04,
+
+ /* olinfo flags */
+ IGB_TX_FLAGS_IPV4 = 0x10,
+ IGB_TX_FLAGS_CSUM = 0x20,
+};
+
+/* VLAN info */
+#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT 16
+
+/* The largest size we can write to the descriptor is 65535. In order to
+ * maintain a power of two alignment we have to limit ourselves to 32K.
+ */
+#define IGB_MAX_TXD_PWR 15
+#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD)
+#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+
+/* EEPROM byte offsets */
+#define IGB_SFF_8472_SWAP 0x5C
+#define IGB_SFF_8472_COMP 0x5E
+
+/* Bitmasks */
+#define IGB_SFF_ADDRESSING_MODE 0x4
+#define IGB_SFF_8472_UNSUP 0x00
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct igb_tx_buffer {
+ union e1000_adv_tx_desc *next_to_watch;
+ unsigned long time_stamp;
+ struct sk_buff *skb;
+ unsigned int bytecount;
+ u16 gso_segs;
+ __be16 protocol;
+
+ DEFINE_DMA_UNMAP_ADDR(dma);
+ DEFINE_DMA_UNMAP_LEN(len);
+ u32 tx_flags;
+};
+
+struct igb_rx_buffer {
+ dma_addr_t dma;
+ struct page *page;
+ unsigned int page_offset;
+};
+
+struct igb_tx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 restart_queue;
+ u64 restart_queue2;
+};
+
+struct igb_rx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 drops;
+ u64 csum_err;
+ u64 alloc_failed;
+};
+
+struct igb_ring_container {
+ struct igb_ring *ring; /* pointer to linked list of rings */
+ unsigned int total_bytes; /* total bytes processed this int */
+ unsigned int total_packets; /* total packets processed this int */
+ u16 work_limit; /* total work allowed per interrupt */
+ u8 count; /* total number of rings in vector */
+ u8 itr; /* current ITR setting for ring */
+};
+
+struct igb_ring {
+ struct igb_q_vector *q_vector; /* backlink to q_vector */
+ struct net_device *netdev; /* back pointer to net_device */
+ struct device *dev; /* device pointer for dma mapping */
+ union { /* array of buffer info structs */
+ struct igb_tx_buffer *tx_buffer_info;
+ struct igb_rx_buffer *rx_buffer_info;
+ };
+ void *desc; /* descriptor ring memory */
+ unsigned long flags; /* ring specific flags */
+ void __iomem *tail; /* pointer to ring tail register */
+ dma_addr_t dma; /* phys address of the ring */
+ unsigned int size; /* length of desc. ring in bytes */
+
+ u16 count; /* number of desc. in the ring */
+ u8 queue_index; /* logical index of the ring*/
+ u8 reg_idx; /* physical index of the ring */
+
+ /* everything past this point are written often */
+ u16 next_to_clean;
+ u16 next_to_use;
+ u16 next_to_alloc;
+
+ union {
+ /* TX */
+ struct {
+ struct igb_tx_queue_stats tx_stats;
+ struct u64_stats_sync tx_syncp;
+ struct u64_stats_sync tx_syncp2;
+ };
+ /* RX */
+ struct {
+ struct sk_buff *skb;
+ struct igb_rx_queue_stats rx_stats;
+ struct u64_stats_sync rx_syncp;
+ };
+ };
+} ____cacheline_internodealigned_in_smp;
+
+struct igb_q_vector {
+ struct igb_adapter *adapter; /* backlink */
+ int cpu; /* CPU for DCA */
+ u32 eims_value; /* EIMS mask value */
+
+ u16 itr_val;
+ u8 set_itr;
+ void __iomem *itr_register;
+
+ struct igb_ring_container rx, tx;
+
+ struct napi_struct napi;
+ struct rcu_head rcu; /* to avoid race with update stats on free */
+ char name[IFNAMSIZ + 9];
+
+ /* for dynamic allocation of rings associated with this q_vector */
+ struct igb_ring ring[0] ____cacheline_internodealigned_in_smp;
+};
+
+enum e1000_ring_flags_t {
+ IGB_RING_FLAG_RX_SCTP_CSUM,
+ IGB_RING_FLAG_RX_LB_VLAN_BSWAP,
+ IGB_RING_FLAG_TX_CTX_IDX,
+ IGB_RING_FLAG_TX_DETECT_HANG
+};
+
+#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS)
+
+#define IGB_RX_DESC(R, i) \
+ (&(((union e1000_adv_rx_desc *)((R)->desc))[i]))
+#define IGB_TX_DESC(R, i) \
+ (&(((union e1000_adv_tx_desc *)((R)->desc))[i]))
+#define IGB_TX_CTXTDESC(R, i) \
+ (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i]))
+
+/* igb_test_staterr - tests bits within Rx descriptor status and error fields */
+static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc,
+ const u32 stat_err_bits)
+{
+ return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits);
+}
+
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+#ifdef CONFIG_IGB_HWMON
+
+#define IGB_HWMON_TYPE_LOC 0
+#define IGB_HWMON_TYPE_TEMP 1
+#define IGB_HWMON_TYPE_CAUTION 2
+#define IGB_HWMON_TYPE_MAX 3
+
+struct hwmon_attr {
+ struct device_attribute dev_attr;
+ struct e1000_hw *hw;
+ struct e1000_thermal_diode_data *sensor;
+ char name[12];
+ };
+
+struct hwmon_buff {
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+ struct attribute *attrs[E1000_MAX_SENSORS * 4 + 1];
+ struct hwmon_attr hwmon_list[E1000_MAX_SENSORS * 4];
+ unsigned int n_hwmon;
+ };
+#endif
+
+#define IGB_RETA_SIZE 128
+
+/* board specific private data structure */
+struct igb_adapter {
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+ struct net_device *netdev;
+
+ unsigned long state;
+ unsigned int flags;
+
+ unsigned int num_q_vectors;
+ struct msix_entry msix_entries[MAX_MSIX_ENTRIES];
+
+ /* Interrupt Throttle Rate */
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /* TX */
+ u16 tx_work_limit;
+ u32 tx_timeout_count;
+ int num_tx_queues;
+ struct igb_ring *tx_ring[16];
+
+ /* RX */
+ int num_rx_queues;
+ struct igb_ring *rx_ring[16];
+
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 wol;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+ bool fc_autoneg;
+ u8 tx_timeout_factor;
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* OS defined structs */
+ struct pci_dev *pdev;
+
+ spinlock_t stats64_lock;
+ struct rtnl_link_stats64 stats64;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+
+ u32 test_icr;
+ struct igb_ring test_tx_ring;
+ struct igb_ring test_rx_ring;
+
+ int msg_enable;
+
+ struct igb_q_vector *q_vector[MAX_Q_VECTORS];
+ u32 eims_enable_mask;
+ u32 eims_other;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ u16 tx_ring_count;
+ u16 rx_ring_count;
+ unsigned int vfs_allocated_count;
+ struct vf_data_storage *vf_data;
+ int vf_rate_link_speed;
+ u32 rss_queues;
+ u32 wvbr;
+ u32 *shadow_vfta;
+
+ struct ptp_clock *ptp_clock;
+ struct ptp_clock_info ptp_caps;
+ struct delayed_work ptp_overflow_work;
+ struct work_struct ptp_tx_work;
+ struct sk_buff *ptp_tx_skb;
+ struct hwtstamp_config tstamp_config;
+ unsigned long ptp_tx_start;
+ unsigned long last_rx_ptp_check;
+ unsigned long last_rx_timestamp;
+ spinlock_t tmreg_lock;
+ struct cyclecounter cc;
+ struct timecounter tc;
+ u32 tx_hwtstamp_timeouts;
+ u32 rx_hwtstamp_cleared;
+
+ char fw_version[32];
+#ifdef CONFIG_IGB_HWMON
+ struct hwmon_buff *igb_hwmon_buff;
+ bool ets;
+#endif
+ struct i2c_algo_bit_data i2c_algo;
+ struct i2c_adapter i2c_adap;
+ struct i2c_client *i2c_client;
+ u32 rss_indir_tbl_init;
+ u8 rss_indir_tbl[IGB_RETA_SIZE];
+
+ unsigned long link_check_timeout;
+ int copper_tries;
+ struct e1000_info ei;
+ u16 eee_advert;
+};
+
+#define IGB_FLAG_HAS_MSI (1 << 0)
+#define IGB_FLAG_DCA_ENABLED (1 << 1)
+#define IGB_FLAG_QUAD_PORT_A (1 << 2)
+#define IGB_FLAG_QUEUE_PAIRS (1 << 3)
+#define IGB_FLAG_DMAC (1 << 4)
+#define IGB_FLAG_PTP (1 << 5)
+#define IGB_FLAG_RSS_FIELD_IPV4_UDP (1 << 6)
+#define IGB_FLAG_RSS_FIELD_IPV6_UDP (1 << 7)
+#define IGB_FLAG_WOL_SUPPORTED (1 << 8)
+#define IGB_FLAG_NEED_LINK_UPDATE (1 << 9)
+#define IGB_FLAG_MEDIA_RESET (1 << 10)
+#define IGB_FLAG_MAS_CAPABLE (1 << 11)
+#define IGB_FLAG_MAS_ENABLE (1 << 12)
+#define IGB_FLAG_HAS_MSIX (1 << 13)
+#define IGB_FLAG_EEE (1 << 14)
+
+/* Media Auto Sense */
+#define IGB_MAS_ENABLE_0 0X0001
+#define IGB_MAS_ENABLE_1 0X0002
+#define IGB_MAS_ENABLE_2 0X0004
+#define IGB_MAS_ENABLE_3 0X0008
+
+/* DMA Coalescing defines */
+#define IGB_MIN_TXPBSIZE 20408
+#define IGB_TX_BUF_4096 4096
+#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */
+
+#define IGB_82576_TSYNC_SHIFT 19
+#define IGB_TS_HDR_LEN 16
+enum e1000_state_t {
+ __IGB_TESTING,
+ __IGB_RESETTING,
+ __IGB_DOWN,
+ __IGB_PTP_TX_IN_PROGRESS,
+};
+
+enum igb_boards {
+ board_82575,
+};
+
+extern char igb_driver_name[];
+extern char igb_driver_version[];
+
+int igb_up(struct igb_adapter *);
+void igb_down(struct igb_adapter *);
+void igb_reinit_locked(struct igb_adapter *);
+void igb_reset(struct igb_adapter *);
+int igb_reinit_queues(struct igb_adapter *);
+void igb_write_rss_indir_tbl(struct igb_adapter *);
+int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
+int igb_setup_tx_resources(struct igb_ring *);
+int igb_setup_rx_resources(struct igb_ring *);
+void igb_free_tx_resources(struct igb_ring *);
+void igb_free_rx_resources(struct igb_ring *);
+void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+void igb_setup_tctl(struct igb_adapter *);
+void igb_setup_rctl(struct igb_adapter *);
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *);
+void igb_unmap_and_free_tx_resource(struct igb_ring *, struct igb_tx_buffer *);
+void igb_alloc_rx_buffers(struct igb_ring *, u16);
+void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
+bool igb_has_link(struct igb_adapter *adapter);
+void igb_set_ethtool_ops(struct net_device *);
+void igb_power_up_link(struct igb_adapter *);
+void igb_set_fw_version(struct igb_adapter *);
+void igb_ptp_init(struct igb_adapter *adapter);
+void igb_ptp_stop(struct igb_adapter *adapter);
+void igb_ptp_reset(struct igb_adapter *adapter);
+void igb_ptp_rx_hang(struct igb_adapter *adapter);
+void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb);
+void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va,
+ struct sk_buff *skb);
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr);
+#ifdef CONFIG_IGB_HWMON
+void igb_sysfs_exit(struct igb_adapter *adapter);
+int igb_sysfs_init(struct igb_adapter *adapter);
+#endif
+static inline s32 igb_reset_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.reset)
+ return hw->phy.ops.reset(hw);
+
+ return 0;
+}
+
+static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ if (hw->phy.ops.read_reg)
+ return hw->phy.ops.read_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ if (hw->phy.ops.write_reg)
+ return hw->phy.ops.write_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_get_phy_info(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.get_phy_info)
+ return hw->phy.ops.get_phy_info(hw);
+
+ return 0;
+}
+
+static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring)
+{
+ return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index);
+}
+
+#endif /* _IGB_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_ethtool-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,3052 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* ethtool support for igb */
+
+#include <linux/vmalloc.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/ethtool.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/highmem.h>
+#include <linux/mdio.h>
+
+#include "igb-3.18-ethercat.h"
+
+struct igb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IGB_STAT(_name, _stat) { \
+ .stat_string = _name, \
+ .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
+ .stat_offset = offsetof(struct igb_adapter, _stat) \
+}
+static const struct igb_stats igb_gstrings_stats[] = {
+ IGB_STAT("rx_packets", stats.gprc),
+ IGB_STAT("tx_packets", stats.gptc),
+ IGB_STAT("rx_bytes", stats.gorc),
+ IGB_STAT("tx_bytes", stats.gotc),
+ IGB_STAT("rx_broadcast", stats.bprc),
+ IGB_STAT("tx_broadcast", stats.bptc),
+ IGB_STAT("rx_multicast", stats.mprc),
+ IGB_STAT("tx_multicast", stats.mptc),
+ IGB_STAT("multicast", stats.mprc),
+ IGB_STAT("collisions", stats.colc),
+ IGB_STAT("rx_crc_errors", stats.crcerrs),
+ IGB_STAT("rx_no_buffer_count", stats.rnbc),
+ IGB_STAT("rx_missed_errors", stats.mpc),
+ IGB_STAT("tx_aborted_errors", stats.ecol),
+ IGB_STAT("tx_carrier_errors", stats.tncrs),
+ IGB_STAT("tx_window_errors", stats.latecol),
+ IGB_STAT("tx_abort_late_coll", stats.latecol),
+ IGB_STAT("tx_deferred_ok", stats.dc),
+ IGB_STAT("tx_single_coll_ok", stats.scc),
+ IGB_STAT("tx_multi_coll_ok", stats.mcc),
+ IGB_STAT("tx_timeout_count", tx_timeout_count),
+ IGB_STAT("rx_long_length_errors", stats.roc),
+ IGB_STAT("rx_short_length_errors", stats.ruc),
+ IGB_STAT("rx_align_errors", stats.algnerrc),
+ IGB_STAT("tx_tcp_seg_good", stats.tsctc),
+ IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
+ IGB_STAT("rx_flow_control_xon", stats.xonrxc),
+ IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
+ IGB_STAT("tx_flow_control_xon", stats.xontxc),
+ IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
+ IGB_STAT("rx_long_byte_count", stats.gorc),
+ IGB_STAT("tx_dma_out_of_sync", stats.doosync),
+ IGB_STAT("tx_smbus", stats.mgptc),
+ IGB_STAT("rx_smbus", stats.mgprc),
+ IGB_STAT("dropped_smbus", stats.mgpdc),
+ IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+ IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+ IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
+ IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+ IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+ IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+};
+
+#define IGB_NETDEV_STAT(_net_stat) { \
+ .stat_string = __stringify(_net_stat), \
+ .sizeof_stat = FIELD_SIZEOF(struct rtnl_link_stats64, _net_stat), \
+ .stat_offset = offsetof(struct rtnl_link_stats64, _net_stat) \
+}
+static const struct igb_stats igb_gstrings_net_stats[] = {
+ IGB_NETDEV_STAT(rx_errors),
+ IGB_NETDEV_STAT(tx_errors),
+ IGB_NETDEV_STAT(tx_dropped),
+ IGB_NETDEV_STAT(rx_length_errors),
+ IGB_NETDEV_STAT(rx_over_errors),
+ IGB_NETDEV_STAT(rx_frame_errors),
+ IGB_NETDEV_STAT(rx_fifo_errors),
+ IGB_NETDEV_STAT(tx_fifo_errors),
+ IGB_NETDEV_STAT(tx_heartbeat_errors)
+};
+
+#define IGB_GLOBAL_STATS_LEN \
+ (sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
+#define IGB_NETDEV_STATS_LEN \
+ (sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
+#define IGB_RX_QUEUE_STATS_LEN \
+ (sizeof(struct igb_rx_queue_stats) / sizeof(u64))
+
+#define IGB_TX_QUEUE_STATS_LEN 3 /* packets, bytes, restart_queue */
+
+#define IGB_QUEUE_STATS_LEN \
+ ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
+ IGB_RX_QUEUE_STATS_LEN) + \
+ (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
+ IGB_TX_QUEUE_STATS_LEN))
+#define IGB_STATS_LEN \
+ (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
+
+static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
+
+static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
+ u32 status;
+ u32 speed;
+
+ status = rd32(E1000_STATUS);
+ if (hw->phy.media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP |
+ SUPPORTED_Pause);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->mac.autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->phy.autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy.addr;
+ ecmd->transceiver = XCVR_INTERNAL;
+ } else {
+ ecmd->supported = (SUPPORTED_FIBRE |
+ SUPPORTED_1000baseKX_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause);
+ ecmd->advertising = (ADVERTISED_FIBRE |
+ ADVERTISED_1000baseKX_Full);
+ if (hw->mac.type == e1000_i354) {
+ if ((hw->device_id ==
+ E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ ecmd->supported |= SUPPORTED_2500baseX_Full;
+ ecmd->supported &=
+ ~SUPPORTED_1000baseKX_Full;
+ ecmd->advertising |= ADVERTISED_2500baseX_Full;
+ ecmd->advertising &=
+ ~ADVERTISED_1000baseKX_Full;
+ }
+ }
+ if (eth_flags->e100_base_fx) {
+ ecmd->supported |= SUPPORTED_100baseT_Full;
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ }
+ if (hw->mac.autoneg == 1)
+ ecmd->advertising |= ADVERTISED_Autoneg;
+
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+ if (hw->mac.autoneg != 1)
+ ecmd->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+
+ switch (hw->fc.requested_mode) {
+ case e1000_fc_full:
+ ecmd->advertising |= ADVERTISED_Pause;
+ break;
+ case e1000_fc_rx_pause:
+ ecmd->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ case e1000_fc_tx_pause:
+ ecmd->advertising |= ADVERTISED_Asym_Pause;
+ break;
+ default:
+ ecmd->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ }
+ if (status & E1000_STATUS_LU) {
+ if ((status & E1000_STATUS_2P5_SKU) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ speed = SPEED_2500;
+ } else if (status & E1000_STATUS_SPEED_1000) {
+ speed = SPEED_1000;
+ } else if (status & E1000_STATUS_SPEED_100) {
+ speed = SPEED_100;
+ } else {
+ speed = SPEED_10;
+ }
+ if ((status & E1000_STATUS_FD) ||
+ hw->phy.media_type != e1000_media_type_copper)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ speed = SPEED_UNKNOWN;
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ }
+ ethtool_cmd_speed_set(ecmd, speed);
+ if ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ /* MDI-X => 2; MDI =>1; Invalid =>0 */
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ ETH_TP_MDI;
+ else
+ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+ if (hw->phy.mdix == AUTO_ALL_MODES)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
+ return 0;
+}
+
+static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed
+ */
+ if (igb_check_reset_block(hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot change link characteristics when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ /* MDI setting is only allowed when autoneg enabled because
+ * some hardware doesn't allow MDI setting when speed or
+ * duplex is forced.
+ */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ if (hw->phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (ecmd->autoneg != AUTONEG_ENABLE)) {
+ dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ return -EINVAL;
+ }
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->mac.autoneg = 1;
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ switch (adapter->link_speed) {
+ case SPEED_2500:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_2500baseX_Full;
+ break;
+ case SPEED_1000:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_1000baseT_Full;
+ break;
+ case SPEED_100:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_100baseT_Full;
+ break;
+ default:
+ break;
+ }
+ } else {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ }
+ ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.requested_mode = e1000_fc_default;
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ /* calling this overrides forced MDI setting */
+ if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return -EINVAL;
+ }
+ }
+
+ /* MDI-X => 2; MDI => 1; Auto => 3 */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ /* fix up the value for auto (3 => 0) as zero is mapped
+ * internally to auto
+ */
+ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ hw->phy.mdix = AUTO_ALL_MODES;
+ else
+ hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ }
+
+ /* reset the link */
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return 0;
+}
+
+static u32 igb_get_link(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ /* If the link is not reported up to netdev, interrupts are disabled,
+ * and so the physical link state may have changed since we last
+ * looked. Set get_link_status to make sure that the true link
+ * state is interrogated, rather than pulling a cached and possibly
+ * stale link state from the driver.
+ */
+ if (!netif_carrier_ok(netdev))
+ mac->get_link_status = 1;
+
+ return igb_has_link(adapter);
+}
+
+static void igb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc.current_mode == e1000_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int igb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ /* 100basefx does not support setting link flow control */
+ if (hw->dev_spec._82575.eth_flags.e100_base_fx)
+ return -EINVAL;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ hw->fc.requested_mode = e1000_fc_default;
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else {
+ igb_reset(adapter);
+ }
+ } else {
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_none;
+
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+ igb_force_mac_fc(hw) : igb_setup_link(hw));
+ }
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return retval;
+}
+
+static u32 igb_get_msglevel(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igb_get_regs_len(struct net_device *netdev)
+{
+#define IGB_REGS_LEN 739
+ return IGB_REGS_LEN * sizeof(u32);
+}
+
+static void igb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 i;
+
+ memset(p, 0, IGB_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = rd32(E1000_CTRL);
+ regs_buff[1] = rd32(E1000_STATUS);
+ regs_buff[2] = rd32(E1000_CTRL_EXT);
+ regs_buff[3] = rd32(E1000_MDIC);
+ regs_buff[4] = rd32(E1000_SCTL);
+ regs_buff[5] = rd32(E1000_CONNSW);
+ regs_buff[6] = rd32(E1000_VET);
+ regs_buff[7] = rd32(E1000_LEDCTL);
+ regs_buff[8] = rd32(E1000_PBA);
+ regs_buff[9] = rd32(E1000_PBS);
+ regs_buff[10] = rd32(E1000_FRTIMER);
+ regs_buff[11] = rd32(E1000_TCPTIMER);
+
+ /* NVM Register */
+ regs_buff[12] = rd32(E1000_EECD);
+
+ /* Interrupt */
+ /* Reading EICS for EICR because they read the
+ * same but EICS does not clear on read
+ */
+ regs_buff[13] = rd32(E1000_EICS);
+ regs_buff[14] = rd32(E1000_EICS);
+ regs_buff[15] = rd32(E1000_EIMS);
+ regs_buff[16] = rd32(E1000_EIMC);
+ regs_buff[17] = rd32(E1000_EIAC);
+ regs_buff[18] = rd32(E1000_EIAM);
+ /* Reading ICS for ICR because they read the
+ * same but ICS does not clear on read
+ */
+ regs_buff[19] = rd32(E1000_ICS);
+ regs_buff[20] = rd32(E1000_ICS);
+ regs_buff[21] = rd32(E1000_IMS);
+ regs_buff[22] = rd32(E1000_IMC);
+ regs_buff[23] = rd32(E1000_IAC);
+ regs_buff[24] = rd32(E1000_IAM);
+ regs_buff[25] = rd32(E1000_IMIRVP);
+
+ /* Flow Control */
+ regs_buff[26] = rd32(E1000_FCAL);
+ regs_buff[27] = rd32(E1000_FCAH);
+ regs_buff[28] = rd32(E1000_FCTTV);
+ regs_buff[29] = rd32(E1000_FCRTL);
+ regs_buff[30] = rd32(E1000_FCRTH);
+ regs_buff[31] = rd32(E1000_FCRTV);
+
+ /* Receive */
+ regs_buff[32] = rd32(E1000_RCTL);
+ regs_buff[33] = rd32(E1000_RXCSUM);
+ regs_buff[34] = rd32(E1000_RLPML);
+ regs_buff[35] = rd32(E1000_RFCTL);
+ regs_buff[36] = rd32(E1000_MRQC);
+ regs_buff[37] = rd32(E1000_VT_CTL);
+
+ /* Transmit */
+ regs_buff[38] = rd32(E1000_TCTL);
+ regs_buff[39] = rd32(E1000_TCTL_EXT);
+ regs_buff[40] = rd32(E1000_TIPG);
+ regs_buff[41] = rd32(E1000_DTXCTL);
+
+ /* Wake Up */
+ regs_buff[42] = rd32(E1000_WUC);
+ regs_buff[43] = rd32(E1000_WUFC);
+ regs_buff[44] = rd32(E1000_WUS);
+ regs_buff[45] = rd32(E1000_IPAV);
+ regs_buff[46] = rd32(E1000_WUPL);
+
+ /* MAC */
+ regs_buff[47] = rd32(E1000_PCS_CFG0);
+ regs_buff[48] = rd32(E1000_PCS_LCTL);
+ regs_buff[49] = rd32(E1000_PCS_LSTAT);
+ regs_buff[50] = rd32(E1000_PCS_ANADV);
+ regs_buff[51] = rd32(E1000_PCS_LPAB);
+ regs_buff[52] = rd32(E1000_PCS_NPTX);
+ regs_buff[53] = rd32(E1000_PCS_LPABNP);
+
+ /* Statistics */
+ regs_buff[54] = adapter->stats.crcerrs;
+ regs_buff[55] = adapter->stats.algnerrc;
+ regs_buff[56] = adapter->stats.symerrs;
+ regs_buff[57] = adapter->stats.rxerrc;
+ regs_buff[58] = adapter->stats.mpc;
+ regs_buff[59] = adapter->stats.scc;
+ regs_buff[60] = adapter->stats.ecol;
+ regs_buff[61] = adapter->stats.mcc;
+ regs_buff[62] = adapter->stats.latecol;
+ regs_buff[63] = adapter->stats.colc;
+ regs_buff[64] = adapter->stats.dc;
+ regs_buff[65] = adapter->stats.tncrs;
+ regs_buff[66] = adapter->stats.sec;
+ regs_buff[67] = adapter->stats.htdpmc;
+ regs_buff[68] = adapter->stats.rlec;
+ regs_buff[69] = adapter->stats.xonrxc;
+ regs_buff[70] = adapter->stats.xontxc;
+ regs_buff[71] = adapter->stats.xoffrxc;
+ regs_buff[72] = adapter->stats.xofftxc;
+ regs_buff[73] = adapter->stats.fcruc;
+ regs_buff[74] = adapter->stats.prc64;
+ regs_buff[75] = adapter->stats.prc127;
+ regs_buff[76] = adapter->stats.prc255;
+ regs_buff[77] = adapter->stats.prc511;
+ regs_buff[78] = adapter->stats.prc1023;
+ regs_buff[79] = adapter->stats.prc1522;
+ regs_buff[80] = adapter->stats.gprc;
+ regs_buff[81] = adapter->stats.bprc;
+ regs_buff[82] = adapter->stats.mprc;
+ regs_buff[83] = adapter->stats.gptc;
+ regs_buff[84] = adapter->stats.gorc;
+ regs_buff[86] = adapter->stats.gotc;
+ regs_buff[88] = adapter->stats.rnbc;
+ regs_buff[89] = adapter->stats.ruc;
+ regs_buff[90] = adapter->stats.rfc;
+ regs_buff[91] = adapter->stats.roc;
+ regs_buff[92] = adapter->stats.rjc;
+ regs_buff[93] = adapter->stats.mgprc;
+ regs_buff[94] = adapter->stats.mgpdc;
+ regs_buff[95] = adapter->stats.mgptc;
+ regs_buff[96] = adapter->stats.tor;
+ regs_buff[98] = adapter->stats.tot;
+ regs_buff[100] = adapter->stats.tpr;
+ regs_buff[101] = adapter->stats.tpt;
+ regs_buff[102] = adapter->stats.ptc64;
+ regs_buff[103] = adapter->stats.ptc127;
+ regs_buff[104] = adapter->stats.ptc255;
+ regs_buff[105] = adapter->stats.ptc511;
+ regs_buff[106] = adapter->stats.ptc1023;
+ regs_buff[107] = adapter->stats.ptc1522;
+ regs_buff[108] = adapter->stats.mptc;
+ regs_buff[109] = adapter->stats.bptc;
+ regs_buff[110] = adapter->stats.tsctc;
+ regs_buff[111] = adapter->stats.iac;
+ regs_buff[112] = adapter->stats.rpthc;
+ regs_buff[113] = adapter->stats.hgptc;
+ regs_buff[114] = adapter->stats.hgorc;
+ regs_buff[116] = adapter->stats.hgotc;
+ regs_buff[118] = adapter->stats.lenerrs;
+ regs_buff[119] = adapter->stats.scvpc;
+ regs_buff[120] = adapter->stats.hrmpc;
+
+ for (i = 0; i < 4; i++)
+ regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[129 + i] = rd32(E1000_RDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[133 + i] = rd32(E1000_RDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[137 + i] = rd32(E1000_RDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[141 + i] = rd32(E1000_RDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[145 + i] = rd32(E1000_RDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
+
+ for (i = 0; i < 10; i++)
+ regs_buff[153 + i] = rd32(E1000_EITR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[163 + i] = rd32(E1000_IMIR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[179 + i] = rd32(E1000_RAL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[195 + i] = rd32(E1000_RAH(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[211 + i] = rd32(E1000_TDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[215 + i] = rd32(E1000_TDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[219 + i] = rd32(E1000_TDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[223 + i] = rd32(E1000_TDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[227 + i] = rd32(E1000_TDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
+
+ regs_buff[547] = rd32(E1000_TDFH);
+ regs_buff[548] = rd32(E1000_TDFT);
+ regs_buff[549] = rd32(E1000_TDFHS);
+ regs_buff[550] = rd32(E1000_TDFPC);
+
+ if (hw->mac.type > e1000_82580) {
+ regs_buff[551] = adapter->stats.o2bgptc;
+ regs_buff[552] = adapter->stats.b2ospc;
+ regs_buff[553] = adapter->stats.o2bspc;
+ regs_buff[554] = adapter->stats.b2ogprc;
+ }
+
+ if (hw->mac.type != e1000_82576)
+ return;
+ for (i = 0; i < 12; i++)
+ regs_buff[555 + i] = rd32(E1000_SRRCTL(i + 4));
+ for (i = 0; i < 4; i++)
+ regs_buff[567 + i] = rd32(E1000_PSRTYPE(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[571 + i] = rd32(E1000_RDBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[583 + i] = rd32(E1000_RDBAH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[595 + i] = rd32(E1000_RDLEN(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[607 + i] = rd32(E1000_RDH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[619 + i] = rd32(E1000_RDT(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[631 + i] = rd32(E1000_RXDCTL(i + 4));
+
+ for (i = 0; i < 12; i++)
+ regs_buff[643 + i] = rd32(E1000_TDBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[655 + i] = rd32(E1000_TDBAH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[667 + i] = rd32(E1000_TDLEN(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[679 + i] = rd32(E1000_TDH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[691 + i] = rd32(E1000_TDT(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[703 + i] = rd32(E1000_TXDCTL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[715 + i] = rd32(E1000_TDWBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[727 + i] = rd32(E1000_TDWBAH(i + 4));
+}
+
+static int igb_get_eeprom_len(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.nvm.word_size * 2;
+}
+
+static int igb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->nvm.type == e1000_nvm_eeprom_spi)
+ ret_val = hw->nvm.ops.read(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int igb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if ((hw->mac.type >= e1000_i210) &&
+ !igb_get_flash_presence_i210(hw)) {
+ return -EOPNOTSUPP;
+ }
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->nvm.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word
+ * only the second byte of the word is being modified
+ */
+ ret_val = hw->nvm.ops.read(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word
+ * only the first byte of the word is being modified
+ */
+ ret_val = hw->nvm.ops.read(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = hw->nvm.ops.write(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum if nvm write succeeded */
+ if (ret_val == 0)
+ hw->nvm.ops.update(hw);
+
+ igb_set_fw_version(adapter);
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void igb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ strlcpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version));
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 82575 controllers
+ */
+ strlcpy(drvinfo->fw_version, adapter->fw_version,
+ sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->n_stats = IGB_STATS_LEN;
+ drvinfo->testinfo_len = IGB_TEST_LEN;
+ drvinfo->regdump_len = igb_get_regs_len(netdev);
+ drvinfo->eedump_len = igb_get_eeprom_len(netdev);
+}
+
+static void igb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ ring->rx_max_pending = IGB_MAX_RXD;
+ ring->tx_max_pending = IGB_MAX_TXD;
+ ring->rx_pending = adapter->rx_ring_count;
+ ring->tx_pending = adapter->tx_ring_count;
+}
+
+static int igb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *temp_ring;
+ int i, err = 0;
+ u16 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
+ new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
+ new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring_count) &&
+ (new_rx_count == adapter->rx_ring_count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
+ if (adapter->num_tx_queues > adapter->num_rx_queues)
+ temp_ring = vmalloc(adapter->num_tx_queues *
+ sizeof(struct igb_ring));
+ else
+ temp_ring = vmalloc(adapter->num_rx_queues *
+ sizeof(struct igb_ring));
+
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igb_down(adapter);
+
+ /* We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the Tx and Rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring_count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->tx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_tx_count;
+ err = igb_setup_tx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_tx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+ }
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ igb_free_tx_resources(adapter->tx_ring[i]);
+
+ memcpy(adapter->tx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->tx_ring_count = new_tx_count;
+ }
+
+ if (new_rx_count != adapter->rx_ring_count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->rx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_rx_count;
+ err = igb_setup_rx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_rx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ igb_free_rx_resources(adapter->rx_ring[i]);
+
+ memcpy(adapter->rx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->rx_ring_count = new_rx_count;
+ }
+err_setup:
+ igb_up(adapter);
+ vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return err;
+}
+
+/* ethtool register test data */
+struct igb_reg_test {
+ u16 reg;
+ u16 reg_offset;
+ u16 array_len;
+ u16 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x100 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* i210 reg test */
+static struct igb_reg_test reg_test_i210[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i210, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x900FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0, 0 }
+};
+
+/* i350 reg test */
+static struct igb_reg_test reg_test_i350[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i350, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82580 reg test */
+static struct igb_reg_test reg_test_82580[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* RDH is read-only for 82580, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82576 reg test */
+static struct igb_reg_test reg_test_82576[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* Enable all RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82576, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82575 register test */
+static struct igb_reg_test reg_test_82575[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* Enable all four RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82575, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pat, val;
+ static const u32 _test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
+ wr32(reg, (_test[pat] & write));
+ val = rd32(reg) & mask;
+ if (val != (_test[pat] & write & mask)) {
+ dev_err(&adapter->pdev->dev,
+ "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+ reg, val, (_test[pat] & write & mask));
+ *data = reg;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 val;
+
+ wr32(reg, write & mask);
+ val = rd32(reg);
+ if ((write & mask) != (val & mask)) {
+ dev_err(&adapter->pdev->dev,
+ "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+ reg, (val & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_test *test;
+ u32 value, before, after;
+ u32 i, toggle;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_i350:
+ case e1000_i354:
+ test = reg_test_i350;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ test = reg_test_i210;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82580:
+ test = reg_test_82580;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82576:
+ test = reg_test_82576;
+ toggle = 0x7FFFF3FF;
+ break;
+ default:
+ test = reg_test_82575;
+ toggle = 0x7FFFF3FF;
+ break;
+ }
+
+ /* Because the status register is such a special case,
+ * we handle it separately from the rest of the register
+ * tests. Some bits are read-only, some toggle, and some
+ * are writable on newer MACs.
+ */
+ before = rd32(E1000_STATUS);
+ value = (rd32(E1000_STATUS) & toggle);
+ wr32(E1000_STATUS, toggle);
+ after = rd32(E1000_STATUS) & toggle;
+ if (value != after) {
+ dev_err(&adapter->pdev->dev,
+ "failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+ after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ wr32(E1000_STATUS, before);
+
+ /* Perform the remainder of the register test, looping through
+ * the test table until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * test->reg_offset));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return 0;
+}
+
+static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* Validate eeprom on all parts but flashless */
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (igb_get_flash_presence_i210(hw)) {
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ }
+ break;
+ default:
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ break;
+ }
+
+ return *data;
+}
+
+static irqreturn_t igb_test_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= rd32(E1000_ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, ics_mask, i = 0, shared_int = true;
+ u32 irq = adapter->pdev->irq;
+
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ if (request_irq(adapter->msix_entries[0].vector,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ shared_int = false;
+ if (request_irq(irq,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, adapter)) {
+ shared_int = false;
+ } else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
+ netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ /* Define all writable bits for ICS */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ ics_mask = 0x37F47EDD;
+ break;
+ case e1000_82576:
+ ics_mask = 0x77D4FBFD;
+ break;
+ case e1000_82580:
+ ics_mask = 0x77DCFED5;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ ics_mask = 0x77DCFED5;
+ break;
+ default:
+ ics_mask = 0x7FFFFFFF;
+ break;
+ }
+
+ /* Test each interrupt */
+ for (; i < 31; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!(mask & ics_mask))
+ continue;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMS, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, ~mask);
+ wr32(E1000_ICS, ~mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (adapter->test_icr & mask) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ /* Unhook test interrupt handler */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ free_irq(adapter->msix_entries[0].vector, adapter);
+ else
+ free_irq(irq, adapter);
+
+ return *data;
+}
+
+static void igb_free_desc_rings(struct igb_adapter *adapter)
+{
+ igb_free_tx_resources(&adapter->test_tx_ring);
+ igb_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int igb_setup_desc_rings(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+ tx_ring->count = IGB_DEFAULT_TXD;
+ tx_ring->dev = &adapter->pdev->dev;
+ tx_ring->netdev = adapter->netdev;
+ tx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_tx_resources(tx_ring)) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ igb_setup_tctl(adapter);
+ igb_configure_tx_ring(adapter, tx_ring);
+
+ /* Setup Rx descriptor ring and Rx buffers */
+ rx_ring->count = IGB_DEFAULT_RXD;
+ rx_ring->dev = &adapter->pdev->dev;
+ rx_ring->netdev = adapter->netdev;
+ rx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_rx_resources(rx_ring)) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+
+ /* set the default queue to queue 0 of PF */
+ wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
+
+ /* enable receive ring */
+ igb_setup_rctl(adapter);
+ igb_configure_rx_ring(adapter, rx_ring);
+
+ igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring));
+
+ return 0;
+
+err_nomem:
+ igb_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void igb_phy_disable_receiver(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ igb_write_phy_reg(hw, 29, 0x001F);
+ igb_write_phy_reg(hw, 30, 0x8FFC);
+ igb_write_phy_reg(hw, 29, 0x001A);
+ igb_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+
+ hw->mac.autoneg = false;
+
+ if (hw->phy.type == e1000_phy_m88) {
+ if (hw->phy.id != I210_I_PHY_ID) {
+ /* Auto-MDI/MDIX Off */
+ igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
+ /* autoneg off */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+ } else {
+ /* force 1000, set loopback */
+ igb_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0);
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+ }
+ } else if (hw->phy.type == e1000_phy_82580) {
+ /* enable MII loopback */
+ igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+ }
+
+ /* add small delay to avoid loopback test failure */
+ msleep(50);
+
+ /* force 1000, set loopback */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD | /* Force Duplex to FULL */
+ E1000_CTRL_SLU); /* Set link up enable bit */
+
+ if (hw->phy.type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy.type == e1000_phy_m88)
+ igb_phy_disable_receiver(adapter);
+
+ mdelay(500);
+ return 0;
+}
+
+static int igb_set_phy_loopback(struct igb_adapter *adapter)
+{
+ return igb_integrated_phy_loopback(adapter);
+}
+
+static int igb_setup_loopback_test(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ reg = rd32(E1000_CTRL_EXT);
+
+ /* use CTRL_EXT to identify link type as SGMII can appear as copper */
+ if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP) ||
+ (hw->device_id == E1000_DEV_ID_I354_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_I354_BACKPLANE_2_5GBPS)) {
+ /* Enable DH89xxCC MPHY for near end loopback */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ reg = rd32(E1000_RCTL);
+ reg |= E1000_RCTL_LBM_TCVR;
+ wr32(E1000_RCTL, reg);
+
+ wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK);
+
+ reg = rd32(E1000_CTRL);
+ reg &= ~(E1000_CTRL_RFCE |
+ E1000_CTRL_TFCE |
+ E1000_CTRL_LRST);
+ reg |= E1000_CTRL_SLU |
+ E1000_CTRL_FD;
+ wr32(E1000_CTRL, reg);
+
+ /* Unset switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg &= ~E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+
+ /* Unset sigdetect for SERDES loopback on
+ * 82580 and newer devices.
+ */
+ if (hw->mac.type >= e1000_82580) {
+ reg = rd32(E1000_PCS_CFG0);
+ reg |= E1000_PCS_CFG_IGN_SD;
+ wr32(E1000_PCS_CFG0, reg);
+ }
+
+ /* Set PCS register for forced speed */
+ reg = rd32(E1000_PCS_LCTL);
+ reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/
+ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
+ E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
+ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
+ E1000_PCS_LCTL_FSD | /* Force Speed */
+ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
+ wr32(E1000_PCS_LCTL, reg);
+
+ return 0;
+ }
+
+ return igb_set_phy_loopback(adapter);
+}
+
+static void igb_loopback_cleanup(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP) ||
+ (hw->device_id == E1000_DEV_ID_I354_SGMII)) {
+ u32 reg;
+
+ /* Disable near end loopback on DH89xxCC */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ wr32(E1000_RCTL, rctl);
+
+ hw->mac.autoneg = true;
+ igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
+ igb_phy_sw_reset(hw);
+ }
+}
+
+static void igb_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size /= 2;
+ memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+ memset(&skb->data[frame_size + 10], 0xBE, 1);
+ memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer,
+ unsigned int frame_size)
+{
+ unsigned char *data;
+ bool match = true;
+
+ frame_size >>= 1;
+
+ data = kmap(rx_buffer->page);
+
+ if (data[3] != 0xFF ||
+ data[frame_size + 10] != 0xBE ||
+ data[frame_size + 12] != 0xAF)
+ match = false;
+
+ kunmap(rx_buffer->page);
+
+ return match;
+}
+
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+ struct igb_ring *tx_ring,
+ unsigned int size)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_rx_buffer *rx_buffer_info;
+ struct igb_tx_buffer *tx_buffer_info;
+ u16 rx_ntc, tx_ntc, count = 0;
+
+ /* initialize next to clean and descriptor values */
+ rx_ntc = rx_ring->next_to_clean;
+ tx_ntc = tx_ring->next_to_clean;
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+
+ while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) {
+ /* check Rx buffer */
+ rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
+
+ /* sync Rx buffer for CPU read */
+ dma_sync_single_for_cpu(rx_ring->dev,
+ rx_buffer_info->dma,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* verify contents of skb */
+ if (igb_check_lbtest_frame(rx_buffer_info, size))
+ count++;
+
+ /* sync Rx buffer for device write */
+ dma_sync_single_for_device(rx_ring->dev,
+ rx_buffer_info->dma,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* unmap buffer on Tx side */
+ tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
+ igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+
+ /* increment Rx/Tx next to clean counters */
+ rx_ntc++;
+ if (rx_ntc == rx_ring->count)
+ rx_ntc = 0;
+ tx_ntc++;
+ if (tx_ntc == tx_ring->count)
+ tx_ntc = 0;
+
+ /* fetch next descriptor */
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+ }
+
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ /* re-map buffers to ring, store next to clean values */
+ igb_alloc_rx_buffers(rx_ring, count);
+ rx_ring->next_to_clean = rx_ntc;
+ tx_ring->next_to_clean = tx_ntc;
+
+ return count;
+}
+
+static int igb_run_loopback_test(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ u16 i, j, lc, good_cnt;
+ int ret_val = 0;
+ unsigned int size = IGB_RX_HDR_LEN;
+ netdev_tx_t tx_ret_val;
+ struct sk_buff *skb;
+
+ /* allocate test skb */
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb)
+ return 11;
+
+ /* place data into test skb */
+ igb_create_lbtest_frame(skb, size);
+ skb_put(skb, size);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ /* reset count of good packets */
+ good_cnt = 0;
+
+ /* place 64 packets on the transmit queue*/
+ for (i = 0; i < 64; i++) {
+ skb_get(skb);
+ tx_ret_val = igb_xmit_frame_ring(skb, tx_ring);
+ if (tx_ret_val == NETDEV_TX_OK)
+ good_cnt++;
+ }
+
+ if (good_cnt != 64) {
+ ret_val = 12;
+ break;
+ }
+
+ /* allow 200 milliseconds for packets to go from Tx to Rx */
+ msleep(200);
+
+ good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+ if (good_cnt != 64) {
+ ret_val = 13;
+ break;
+ }
+ } /* end loop count loop */
+
+ /* free the original skb */
+ kfree_skb(skb);
+
+ return ret_val;
+}
+
+static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
+{
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active
+ */
+ if (igb_check_reset_block(&adapter->hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot do PHY loopback test when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+
+ if (adapter->hw.mac.type == e1000_i354) {
+ dev_info(&adapter->pdev->dev,
+ "Loopback test not supported on i354.\n");
+ *data = 0;
+ goto out;
+ }
+ *data = igb_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = igb_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = igb_run_loopback_test(adapter);
+ igb_loopback_cleanup(adapter);
+
+err_loopback:
+ igb_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int igb_link_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+
+ hw->mac.serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes
+ */
+ do {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.autoneg)
+ msleep(5000);
+
+ if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
+ *data = 1;
+ }
+ return *data;
+}
+
+static void igb_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u16 autoneg_advertised;
+ u8 forced_speed_duplex, autoneg;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IGB_TESTING, &adapter->state);
+
+ /* can't do offline tests on media switching devices */
+ if (adapter->hw.dev_spec._82575.mas_capable)
+ eth_test->flags &= ~ETH_TEST_FL_OFFLINE;
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+ autoneg = adapter->hw.mac.autoneg;
+
+ dev_info(&adapter->pdev->dev, "offline testing starting\n");
+
+ /* power up link for link test */
+ igb_power_up_link(adapter);
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
+ if (igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ igb_reset(adapter);
+
+ if (igb_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ /* power up link for loopback test */
+ igb_power_up_link(adapter);
+ if (igb_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+ adapter->hw.mac.autoneg = autoneg;
+
+ /* force this routine to wait until autoneg complete/timeout */
+ adapter->hw.phy.autoneg_wait_to_complete = true;
+ igb_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = false;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ dev_info(&adapter->pdev->dev, "online testing starting\n");
+
+ /* PHY is powered down when interface is down */
+ if (if_running && igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ else
+ data[4] = 0;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ wol->wolopts = 0;
+
+ if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
+ return;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY;
+
+ /* apply any specific unsupported masks here */
+ switch (adapter->hw.device_id) {
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & E1000_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+}
+
+static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= E1000_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* bit defines for adapter->led_status */
+#define IGB_LED_ON 0
+
+static int igb_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ igb_blink_led(hw);
+ return 2;
+ case ETHTOOL_ID_ON:
+ igb_blink_led(hw);
+ break;
+ case ETHTOOL_ID_OFF:
+ igb_led_off(hw);
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ igb_led_off(hw);
+ clear_bit(IGB_LED_ON, &adapter->led_status);
+ igb_cleanup_led(hw);
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->tx_coalesce_usecs > 3) &&
+ (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->tx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+ return -EINVAL;
+
+ /* If ITR is disabled, disable DMAC */
+ if (ec->rx_coalesce_usecs == 0) {
+ if (adapter->flags & IGB_FLAG_DMAC)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ }
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+ else
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+ /* convert to rate of irq's per second */
+ if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+ adapter->tx_itr_setting = adapter->rx_itr_setting;
+ else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+ else
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+ if (q_vector->rx.ring)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ else
+ q_vector->itr_val = adapter->tx_itr_setting;
+ if (q_vector->itr_val && q_vector->itr_val <= 3)
+ q_vector->itr_val = IGB_START_ITR;
+ q_vector->set_itr = 1;
+ }
+
+ return 0;
+}
+
+static int igb_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->rx_itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+ else
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+ if (adapter->tx_itr_setting <= 3)
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+ else
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+ }
+
+ return 0;
+}
+
+static int igb_nway_reset(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ return 0;
+}
+
+static int igb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IGB_STATS_LEN;
+ case ETH_SS_TEST:
+ return IGB_TEST_LEN;
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static void igb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct rtnl_link_stats64 *net_stats = &adapter->stats64;
+ unsigned int start;
+ struct igb_ring *ring;
+ int i, j;
+ char *p;
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, net_stats);
+
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
+ data[i] = (igb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
+ p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
+ data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < adapter->num_tx_queues; j++) {
+ u64 restart2;
+
+ ring = adapter->tx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
+ data[i] = ring->tx_stats.packets;
+ data[i+1] = ring->tx_stats.bytes;
+ data[i+2] = ring->tx_stats.restart_queue;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp2);
+ restart2 = ring->tx_stats.restart_queue2;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp2, start));
+ data[i+2] += restart2;
+
+ i += IGB_TX_QUEUE_STATS_LEN;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ ring = adapter->rx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
+ data[i] = ring->rx_stats.packets;
+ data[i+1] = ring->rx_stats.bytes;
+ data[i+2] = ring->rx_stats.drops;
+ data[i+3] = ring->rx_stats.csum_err;
+ data[i+4] = ring->rx_stats.alloc_failed;
+ } while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
+ i += IGB_RX_QUEUE_STATS_LEN;
+ }
+ spin_unlock(&adapter->stats64_lock);
+}
+
+static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igb_gstrings_test,
+ IGB_TEST_LEN*ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_net_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_restart", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_drops", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_csum_err", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_alloc_failed", i);
+ p += ETH_GSTRING_LEN;
+ }
+ /* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static int igb_get_ts_info(struct net_device *dev,
+ struct ethtool_ts_info *info)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+
+ if (adapter->ptp_clock)
+ info->phc_index = ptp_clock_index(adapter->ptp_clock);
+ else
+ info->phc_index = -1;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82575:
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
+ return 0;
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ info->tx_types =
+ (1 << HWTSTAMP_TX_OFF) |
+ (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = 1 << HWTSTAMP_FILTER_NONE;
+
+ /* 82576 does not support timestamping all packets. */
+ if (adapter->hw.mac.type >= e1000_82580)
+ info->rx_filters |= 1 << HWTSTAMP_FILTER_ALL;
+ else
+ info->rx_filters |=
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int igb_get_rss_hash_opts(struct igb_adapter *adapter,
+ struct ethtool_rxnfc *cmd)
+{
+ cmd->data = 0;
+
+ /* Report default options for RSS on igb */
+ switch (cmd->flow_type) {
+ case TCP_V4_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case UDP_V4_FLOW:
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case SCTP_V4_FLOW:
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case IPV4_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case TCP_V6_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case UDP_V6_FLOW:
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case SCTP_V6_FLOW:
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case IPV6_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+ u32 *rule_locs)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = adapter->num_rx_queues;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXFH:
+ ret = igb_get_rss_hash_opts(adapter, cmd);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+#define UDP_RSS_FLAGS (IGB_FLAG_RSS_FIELD_IPV4_UDP | \
+ IGB_FLAG_RSS_FIELD_IPV6_UDP)
+static int igb_set_rss_hash_opt(struct igb_adapter *adapter,
+ struct ethtool_rxnfc *nfc)
+{
+ u32 flags = adapter->flags;
+
+ /* RSS does not support anything other than hashing
+ * to queues on src and dst IPs and ports
+ */
+ if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3))
+ return -EINVAL;
+
+ switch (nfc->flow_type) {
+ case TCP_V4_FLOW:
+ case TCP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST) ||
+ !(nfc->data & RXH_L4_B_0_1) ||
+ !(nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ break;
+ case UDP_V4_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST))
+ return -EINVAL;
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ flags &= ~IGB_FLAG_RSS_FIELD_IPV4_UDP;
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ flags |= IGB_FLAG_RSS_FIELD_IPV4_UDP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case UDP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST))
+ return -EINVAL;
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ flags &= ~IGB_FLAG_RSS_FIELD_IPV6_UDP;
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ flags |= IGB_FLAG_RSS_FIELD_IPV6_UDP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case SCTP_V4_FLOW:
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case SCTP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST) ||
+ (nfc->data & RXH_L4_B_0_1) ||
+ (nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* if we changed something we need to update flags */
+ if (flags != adapter->flags) {
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc = rd32(E1000_MRQC);
+
+ if ((flags & UDP_RSS_FLAGS) &&
+ !(adapter->flags & UDP_RSS_FLAGS))
+ dev_err(&adapter->pdev->dev,
+ "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n");
+
+ adapter->flags = flags;
+
+ /* Perform hash on these packet types */
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP;
+
+ mrqc &= ~(E1000_MRQC_RSS_FIELD_IPV4_UDP |
+ E1000_MRQC_RSS_FIELD_IPV6_UDP);
+
+ if (flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
+
+ if (flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
+
+ wr32(E1000_MRQC, mrqc);
+ }
+
+ return 0;
+}
+
+static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_SRXFH:
+ ret = igb_set_rss_hash_opt(adapter, cmd);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ret_val;
+ u16 phy_data;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ return -EOPNOTSUPP;
+
+ edata->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full);
+ if (!hw->dev_spec._82575.eee_disable)
+ edata->advertised =
+ mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+
+ /* The IPCNFG and EEER registers are not supported on I354. */
+ if (hw->mac.type == e1000_i354) {
+ igb_get_eee_status_i354(hw, (bool *)&edata->eee_active);
+ } else {
+ u32 eeer;
+
+ eeer = rd32(E1000_EEER);
+
+ /* EEE status on negotiated link */
+ if (eeer & E1000_EEER_EEE_NEG)
+ edata->eee_active = true;
+
+ if (eeer & E1000_EEER_TX_LPI_EN)
+ edata->tx_lpi_enabled = true;
+ }
+
+ /* EEE Link Partner Advertised */
+ switch (hw->mac.type) {
+ case e1000_i350:
+ ret_val = igb_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+ break;
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210,
+ E1000_EEE_LP_ADV_DEV_I210,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ break;
+ default:
+ break;
+ }
+
+ edata->eee_enabled = !hw->dev_spec._82575.eee_disable;
+
+ if ((hw->mac.type == e1000_i354) &&
+ (edata->eee_enabled))
+ edata->tx_lpi_enabled = true;
+
+ /* Report correct negotiated EEE status for devices that
+ * wrongly report EEE at half-duplex
+ */
+ if (adapter->link_duplex == HALF_DUPLEX) {
+ edata->eee_enabled = false;
+ edata->eee_active = false;
+ edata->tx_lpi_enabled = false;
+ edata->advertised &= ~edata->advertised;
+ }
+
+ return 0;
+}
+
+static int igb_set_eee(struct net_device *netdev,
+ struct ethtool_eee *edata)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_curr;
+ bool adv1g_eee = true, adv100m_eee = true;
+ s32 ret_val;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ return -EOPNOTSUPP;
+
+ memset(&eee_curr, 0, sizeof(struct ethtool_eee));
+
+ ret_val = igb_get_eee(netdev, &eee_curr);
+ if (ret_val)
+ return ret_val;
+
+ if (eee_curr.eee_enabled) {
+ if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ /* Tx LPI timer is not implemented currently */
+ if (edata->tx_lpi_timer) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+
+ if (!edata->advertised || (edata->advertised &
+ ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL))) {
+ dev_err(&adapter->pdev->dev,
+ "EEE Advertisement supports only 100Tx and/or 100T full duplex\n");
+ return -EINVAL;
+ }
+ adv100m_eee = !!(edata->advertised & ADVERTISE_100_FULL);
+ adv1g_eee = !!(edata->advertised & ADVERTISE_1000_FULL);
+
+ } else if (!edata->eee_enabled) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE options are not supported with EEE disabled\n");
+ return -EINVAL;
+ }
+
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+ if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) {
+ hw->dev_spec._82575.eee_disable = !edata->eee_enabled;
+ adapter->flags |= IGB_FLAG_EEE;
+
+ /* reset link */
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ else
+ igb_reset(adapter);
+ }
+
+ if (hw->mac.type == e1000_i354)
+ ret_val = igb_set_eee_i354(hw, adv1g_eee, adv100m_eee);
+ else
+ ret_val = igb_set_eee_i350(hw, adv1g_eee, adv100m_eee);
+
+ if (ret_val) {
+ dev_err(&adapter->pdev->dev,
+ "Problem setting EEE advertisement options\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = 0;
+ u16 sff8472_rev, addr_mode;
+ bool page_swap = false;
+
+ if ((hw->phy.media_type == e1000_media_type_copper) ||
+ (hw->phy.media_type == e1000_media_type_unknown))
+ return -EOPNOTSUPP;
+
+ /* Check whether we support SFF-8472 or not */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev);
+ if (status)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode);
+ if (status)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) {
+ hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
+ page_swap = true;
+ }
+
+ if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) {
+ /* We have an SFP, but it does not support SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else {
+ /* We have an SFP which supports a revision of SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = 0;
+ u16 *dataword;
+ u16 first_word, last_word;
+ int i = 0;
+
+ if (ee->len == 0)
+ return -EINVAL;
+
+ first_word = ee->offset >> 1;
+ last_word = (ee->offset + ee->len - 1) >> 1;
+
+ dataword = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
+ if (!dataword)
+ return -ENOMEM;
+
+ /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
+ if (status) {
+ /* Error occurred while reading module */
+ kfree(dataword);
+ return -EIO;
+ }
+
+ be16_to_cpus(&dataword[i]);
+ }
+
+ memcpy(data, (u8 *)dataword + (ee->offset & 1), ee->len);
+ kfree(dataword);
+
+ return 0;
+}
+
+static int igb_ethtool_begin(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_get_sync(&adapter->pdev->dev);
+ return 0;
+}
+
+static void igb_ethtool_complete(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_put(&adapter->pdev->dev);
+}
+
+static u32 igb_get_rxfh_indir_size(struct net_device *netdev)
+{
+ return IGB_RETA_SIZE;
+}
+
+static int igb_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ indir[i] = adapter->rss_indir_tbl[i];
+
+ return 0;
+}
+
+void igb_write_rss_indir_tbl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg = E1000_RETA(0);
+ u32 shift = 0;
+ int i = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ shift = 6;
+ break;
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ shift = 3;
+ break;
+ default:
+ break;
+ }
+
+ while (i < IGB_RETA_SIZE) {
+ u32 val = 0;
+ int j;
+
+ for (j = 3; j >= 0; j--) {
+ val <<= 8;
+ val |= adapter->rss_indir_tbl[i + j];
+ }
+
+ wr32(reg, val << shift);
+ reg += 4;
+ i += 4;
+ }
+}
+
+static int igb_set_rxfh(struct net_device *netdev, const u32 *indir,
+ const u8 *key)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+ u32 num_queues;
+
+ num_queues = adapter->rss_queues;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ num_queues = 2;
+ break;
+ default:
+ break;
+ }
+
+ /* Verify user input. */
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ if (indir[i] >= num_queues)
+ return -EINVAL;
+
+
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ adapter->rss_indir_tbl[i] = indir[i];
+
+ igb_write_rss_indir_tbl(adapter);
+
+ return 0;
+}
+
+static unsigned int igb_max_channels(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int max_combined = 0;
+
+ switch (hw->mac.type) {
+ case e1000_i211:
+ max_combined = IGB_MAX_RX_QUEUES_I211;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ max_combined = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ if (!!adapter->vfs_allocated_count) {
+ max_combined = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_combined = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
+ case e1000_i354:
+ default:
+ max_combined = IGB_MAX_RX_QUEUES;
+ break;
+ }
+
+ return max_combined;
+}
+
+static void igb_get_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ /* Report maximum channels */
+ ch->max_combined = igb_max_channels(adapter);
+
+ /* Report info for other vector */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ ch->max_other = NON_Q_VECTORS;
+ ch->other_count = NON_Q_VECTORS;
+ }
+
+ ch->combined_count = adapter->rss_queues;
+}
+
+static int igb_set_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ unsigned int count = ch->combined_count;
+
+ /* Verify they are not requesting separate vectors */
+ if (!count || ch->rx_count || ch->tx_count)
+ return -EINVAL;
+
+ /* Verify other_count is valid and has not been changed */
+ if (ch->other_count != NON_Q_VECTORS)
+ return -EINVAL;
+
+ /* Verify the number of channels doesn't exceed hw limits */
+ if (count > igb_max_channels(adapter))
+ return -EINVAL;
+
+ if (count != adapter->rss_queues) {
+ adapter->rss_queues = count;
+
+ /* Hardware has to reinitialize queues and interrupts to
+ * match the new configuration.
+ */
+ return igb_reinit_queues(adapter);
+ }
+
+ return 0;
+}
+
+static const struct ethtool_ops igb_ethtool_ops = {
+ .get_settings = igb_get_settings,
+ .set_settings = igb_set_settings,
+ .get_drvinfo = igb_get_drvinfo,
+ .get_regs_len = igb_get_regs_len,
+ .get_regs = igb_get_regs,
+ .get_wol = igb_get_wol,
+ .set_wol = igb_set_wol,
+ .get_msglevel = igb_get_msglevel,
+ .set_msglevel = igb_set_msglevel,
+ .nway_reset = igb_nway_reset,
+ .get_link = igb_get_link,
+ .get_eeprom_len = igb_get_eeprom_len,
+ .get_eeprom = igb_get_eeprom,
+ .set_eeprom = igb_set_eeprom,
+ .get_ringparam = igb_get_ringparam,
+ .set_ringparam = igb_set_ringparam,
+ .get_pauseparam = igb_get_pauseparam,
+ .set_pauseparam = igb_set_pauseparam,
+ .self_test = igb_diag_test,
+ .get_strings = igb_get_strings,
+ .set_phys_id = igb_set_phys_id,
+ .get_sset_count = igb_get_sset_count,
+ .get_ethtool_stats = igb_get_ethtool_stats,
+ .get_coalesce = igb_get_coalesce,
+ .set_coalesce = igb_set_coalesce,
+ .get_ts_info = igb_get_ts_info,
+ .get_rxnfc = igb_get_rxnfc,
+ .set_rxnfc = igb_set_rxnfc,
+ .get_eee = igb_get_eee,
+ .set_eee = igb_set_eee,
+ .get_module_info = igb_get_module_info,
+ .get_module_eeprom = igb_get_module_eeprom,
+ .get_rxfh_indir_size = igb_get_rxfh_indir_size,
+ .get_rxfh = igb_get_rxfh,
+ .set_rxfh = igb_set_rxfh,
+ .get_channels = igb_get_channels,
+ .set_channels = igb_set_channels,
+ .begin = igb_ethtool_begin,
+ .complete = igb_ethtool_complete,
+};
+
+void igb_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &igb_ethtool_ops;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_ethtool-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,3052 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+/* ethtool support for igb */
+
+#include <linux/vmalloc.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/ethtool.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/highmem.h>
+#include <linux/mdio.h>
+
+#include "igb.h"
+
+struct igb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IGB_STAT(_name, _stat) { \
+ .stat_string = _name, \
+ .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
+ .stat_offset = offsetof(struct igb_adapter, _stat) \
+}
+static const struct igb_stats igb_gstrings_stats[] = {
+ IGB_STAT("rx_packets", stats.gprc),
+ IGB_STAT("tx_packets", stats.gptc),
+ IGB_STAT("rx_bytes", stats.gorc),
+ IGB_STAT("tx_bytes", stats.gotc),
+ IGB_STAT("rx_broadcast", stats.bprc),
+ IGB_STAT("tx_broadcast", stats.bptc),
+ IGB_STAT("rx_multicast", stats.mprc),
+ IGB_STAT("tx_multicast", stats.mptc),
+ IGB_STAT("multicast", stats.mprc),
+ IGB_STAT("collisions", stats.colc),
+ IGB_STAT("rx_crc_errors", stats.crcerrs),
+ IGB_STAT("rx_no_buffer_count", stats.rnbc),
+ IGB_STAT("rx_missed_errors", stats.mpc),
+ IGB_STAT("tx_aborted_errors", stats.ecol),
+ IGB_STAT("tx_carrier_errors", stats.tncrs),
+ IGB_STAT("tx_window_errors", stats.latecol),
+ IGB_STAT("tx_abort_late_coll", stats.latecol),
+ IGB_STAT("tx_deferred_ok", stats.dc),
+ IGB_STAT("tx_single_coll_ok", stats.scc),
+ IGB_STAT("tx_multi_coll_ok", stats.mcc),
+ IGB_STAT("tx_timeout_count", tx_timeout_count),
+ IGB_STAT("rx_long_length_errors", stats.roc),
+ IGB_STAT("rx_short_length_errors", stats.ruc),
+ IGB_STAT("rx_align_errors", stats.algnerrc),
+ IGB_STAT("tx_tcp_seg_good", stats.tsctc),
+ IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
+ IGB_STAT("rx_flow_control_xon", stats.xonrxc),
+ IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
+ IGB_STAT("tx_flow_control_xon", stats.xontxc),
+ IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
+ IGB_STAT("rx_long_byte_count", stats.gorc),
+ IGB_STAT("tx_dma_out_of_sync", stats.doosync),
+ IGB_STAT("tx_smbus", stats.mgptc),
+ IGB_STAT("rx_smbus", stats.mgprc),
+ IGB_STAT("dropped_smbus", stats.mgpdc),
+ IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+ IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+ IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
+ IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+ IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+ IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+};
+
+#define IGB_NETDEV_STAT(_net_stat) { \
+ .stat_string = __stringify(_net_stat), \
+ .sizeof_stat = FIELD_SIZEOF(struct rtnl_link_stats64, _net_stat), \
+ .stat_offset = offsetof(struct rtnl_link_stats64, _net_stat) \
+}
+static const struct igb_stats igb_gstrings_net_stats[] = {
+ IGB_NETDEV_STAT(rx_errors),
+ IGB_NETDEV_STAT(tx_errors),
+ IGB_NETDEV_STAT(tx_dropped),
+ IGB_NETDEV_STAT(rx_length_errors),
+ IGB_NETDEV_STAT(rx_over_errors),
+ IGB_NETDEV_STAT(rx_frame_errors),
+ IGB_NETDEV_STAT(rx_fifo_errors),
+ IGB_NETDEV_STAT(tx_fifo_errors),
+ IGB_NETDEV_STAT(tx_heartbeat_errors)
+};
+
+#define IGB_GLOBAL_STATS_LEN \
+ (sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
+#define IGB_NETDEV_STATS_LEN \
+ (sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
+#define IGB_RX_QUEUE_STATS_LEN \
+ (sizeof(struct igb_rx_queue_stats) / sizeof(u64))
+
+#define IGB_TX_QUEUE_STATS_LEN 3 /* packets, bytes, restart_queue */
+
+#define IGB_QUEUE_STATS_LEN \
+ ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
+ IGB_RX_QUEUE_STATS_LEN) + \
+ (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
+ IGB_TX_QUEUE_STATS_LEN))
+#define IGB_STATS_LEN \
+ (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
+
+static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
+
+static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
+ u32 status;
+ u32 speed;
+
+ status = rd32(E1000_STATUS);
+ if (hw->phy.media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP |
+ SUPPORTED_Pause);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->mac.autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->phy.autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy.addr;
+ ecmd->transceiver = XCVR_INTERNAL;
+ } else {
+ ecmd->supported = (SUPPORTED_FIBRE |
+ SUPPORTED_1000baseKX_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause);
+ ecmd->advertising = (ADVERTISED_FIBRE |
+ ADVERTISED_1000baseKX_Full);
+ if (hw->mac.type == e1000_i354) {
+ if ((hw->device_id ==
+ E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ ecmd->supported |= SUPPORTED_2500baseX_Full;
+ ecmd->supported &=
+ ~SUPPORTED_1000baseKX_Full;
+ ecmd->advertising |= ADVERTISED_2500baseX_Full;
+ ecmd->advertising &=
+ ~ADVERTISED_1000baseKX_Full;
+ }
+ }
+ if (eth_flags->e100_base_fx) {
+ ecmd->supported |= SUPPORTED_100baseT_Full;
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ }
+ if (hw->mac.autoneg == 1)
+ ecmd->advertising |= ADVERTISED_Autoneg;
+
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+ if (hw->mac.autoneg != 1)
+ ecmd->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+
+ switch (hw->fc.requested_mode) {
+ case e1000_fc_full:
+ ecmd->advertising |= ADVERTISED_Pause;
+ break;
+ case e1000_fc_rx_pause:
+ ecmd->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ case e1000_fc_tx_pause:
+ ecmd->advertising |= ADVERTISED_Asym_Pause;
+ break;
+ default:
+ ecmd->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ }
+ if (status & E1000_STATUS_LU) {
+ if ((status & E1000_STATUS_2P5_SKU) &&
+ !(status & E1000_STATUS_2P5_SKU_OVER)) {
+ speed = SPEED_2500;
+ } else if (status & E1000_STATUS_SPEED_1000) {
+ speed = SPEED_1000;
+ } else if (status & E1000_STATUS_SPEED_100) {
+ speed = SPEED_100;
+ } else {
+ speed = SPEED_10;
+ }
+ if ((status & E1000_STATUS_FD) ||
+ hw->phy.media_type != e1000_media_type_copper)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ speed = SPEED_UNKNOWN;
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ }
+ ethtool_cmd_speed_set(ecmd, speed);
+ if ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ /* MDI-X => 2; MDI =>1; Invalid =>0 */
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ ETH_TP_MDI;
+ else
+ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+ if (hw->phy.mdix == AUTO_ALL_MODES)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
+ return 0;
+}
+
+static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed
+ */
+ if (igb_check_reset_block(hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot change link characteristics when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ /* MDI setting is only allowed when autoneg enabled because
+ * some hardware doesn't allow MDI setting when speed or
+ * duplex is forced.
+ */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ if (hw->phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (ecmd->autoneg != AUTONEG_ENABLE)) {
+ dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ return -EINVAL;
+ }
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->mac.autoneg = 1;
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ switch (adapter->link_speed) {
+ case SPEED_2500:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_2500baseX_Full;
+ break;
+ case SPEED_1000:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_1000baseT_Full;
+ break;
+ case SPEED_100:
+ hw->phy.autoneg_advertised =
+ ADVERTISED_100baseT_Full;
+ break;
+ default:
+ break;
+ }
+ } else {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ }
+ ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.requested_mode = e1000_fc_default;
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ /* calling this overrides forced MDI setting */
+ if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return -EINVAL;
+ }
+ }
+
+ /* MDI-X => 2; MDI => 1; Auto => 3 */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ /* fix up the value for auto (3 => 0) as zero is mapped
+ * internally to auto
+ */
+ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ hw->phy.mdix = AUTO_ALL_MODES;
+ else
+ hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ }
+
+ /* reset the link */
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return 0;
+}
+
+static u32 igb_get_link(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ /* If the link is not reported up to netdev, interrupts are disabled,
+ * and so the physical link state may have changed since we last
+ * looked. Set get_link_status to make sure that the true link
+ * state is interrogated, rather than pulling a cached and possibly
+ * stale link state from the driver.
+ */
+ if (!netif_carrier_ok(netdev))
+ mac->get_link_status = 1;
+
+ return igb_has_link(adapter);
+}
+
+static void igb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc.current_mode == e1000_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int igb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ /* 100basefx does not support setting link flow control */
+ if (hw->dev_spec._82575.eth_flags.e100_base_fx)
+ return -EINVAL;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ hw->fc.requested_mode = e1000_fc_default;
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else {
+ igb_reset(adapter);
+ }
+ } else {
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_none;
+
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+ igb_force_mac_fc(hw) : igb_setup_link(hw));
+ }
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return retval;
+}
+
+static u32 igb_get_msglevel(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igb_get_regs_len(struct net_device *netdev)
+{
+#define IGB_REGS_LEN 739
+ return IGB_REGS_LEN * sizeof(u32);
+}
+
+static void igb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 i;
+
+ memset(p, 0, IGB_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = rd32(E1000_CTRL);
+ regs_buff[1] = rd32(E1000_STATUS);
+ regs_buff[2] = rd32(E1000_CTRL_EXT);
+ regs_buff[3] = rd32(E1000_MDIC);
+ regs_buff[4] = rd32(E1000_SCTL);
+ regs_buff[5] = rd32(E1000_CONNSW);
+ regs_buff[6] = rd32(E1000_VET);
+ regs_buff[7] = rd32(E1000_LEDCTL);
+ regs_buff[8] = rd32(E1000_PBA);
+ regs_buff[9] = rd32(E1000_PBS);
+ regs_buff[10] = rd32(E1000_FRTIMER);
+ regs_buff[11] = rd32(E1000_TCPTIMER);
+
+ /* NVM Register */
+ regs_buff[12] = rd32(E1000_EECD);
+
+ /* Interrupt */
+ /* Reading EICS for EICR because they read the
+ * same but EICS does not clear on read
+ */
+ regs_buff[13] = rd32(E1000_EICS);
+ regs_buff[14] = rd32(E1000_EICS);
+ regs_buff[15] = rd32(E1000_EIMS);
+ regs_buff[16] = rd32(E1000_EIMC);
+ regs_buff[17] = rd32(E1000_EIAC);
+ regs_buff[18] = rd32(E1000_EIAM);
+ /* Reading ICS for ICR because they read the
+ * same but ICS does not clear on read
+ */
+ regs_buff[19] = rd32(E1000_ICS);
+ regs_buff[20] = rd32(E1000_ICS);
+ regs_buff[21] = rd32(E1000_IMS);
+ regs_buff[22] = rd32(E1000_IMC);
+ regs_buff[23] = rd32(E1000_IAC);
+ regs_buff[24] = rd32(E1000_IAM);
+ regs_buff[25] = rd32(E1000_IMIRVP);
+
+ /* Flow Control */
+ regs_buff[26] = rd32(E1000_FCAL);
+ regs_buff[27] = rd32(E1000_FCAH);
+ regs_buff[28] = rd32(E1000_FCTTV);
+ regs_buff[29] = rd32(E1000_FCRTL);
+ regs_buff[30] = rd32(E1000_FCRTH);
+ regs_buff[31] = rd32(E1000_FCRTV);
+
+ /* Receive */
+ regs_buff[32] = rd32(E1000_RCTL);
+ regs_buff[33] = rd32(E1000_RXCSUM);
+ regs_buff[34] = rd32(E1000_RLPML);
+ regs_buff[35] = rd32(E1000_RFCTL);
+ regs_buff[36] = rd32(E1000_MRQC);
+ regs_buff[37] = rd32(E1000_VT_CTL);
+
+ /* Transmit */
+ regs_buff[38] = rd32(E1000_TCTL);
+ regs_buff[39] = rd32(E1000_TCTL_EXT);
+ regs_buff[40] = rd32(E1000_TIPG);
+ regs_buff[41] = rd32(E1000_DTXCTL);
+
+ /* Wake Up */
+ regs_buff[42] = rd32(E1000_WUC);
+ regs_buff[43] = rd32(E1000_WUFC);
+ regs_buff[44] = rd32(E1000_WUS);
+ regs_buff[45] = rd32(E1000_IPAV);
+ regs_buff[46] = rd32(E1000_WUPL);
+
+ /* MAC */
+ regs_buff[47] = rd32(E1000_PCS_CFG0);
+ regs_buff[48] = rd32(E1000_PCS_LCTL);
+ regs_buff[49] = rd32(E1000_PCS_LSTAT);
+ regs_buff[50] = rd32(E1000_PCS_ANADV);
+ regs_buff[51] = rd32(E1000_PCS_LPAB);
+ regs_buff[52] = rd32(E1000_PCS_NPTX);
+ regs_buff[53] = rd32(E1000_PCS_LPABNP);
+
+ /* Statistics */
+ regs_buff[54] = adapter->stats.crcerrs;
+ regs_buff[55] = adapter->stats.algnerrc;
+ regs_buff[56] = adapter->stats.symerrs;
+ regs_buff[57] = adapter->stats.rxerrc;
+ regs_buff[58] = adapter->stats.mpc;
+ regs_buff[59] = adapter->stats.scc;
+ regs_buff[60] = adapter->stats.ecol;
+ regs_buff[61] = adapter->stats.mcc;
+ regs_buff[62] = adapter->stats.latecol;
+ regs_buff[63] = adapter->stats.colc;
+ regs_buff[64] = adapter->stats.dc;
+ regs_buff[65] = adapter->stats.tncrs;
+ regs_buff[66] = adapter->stats.sec;
+ regs_buff[67] = adapter->stats.htdpmc;
+ regs_buff[68] = adapter->stats.rlec;
+ regs_buff[69] = adapter->stats.xonrxc;
+ regs_buff[70] = adapter->stats.xontxc;
+ regs_buff[71] = adapter->stats.xoffrxc;
+ regs_buff[72] = adapter->stats.xofftxc;
+ regs_buff[73] = adapter->stats.fcruc;
+ regs_buff[74] = adapter->stats.prc64;
+ regs_buff[75] = adapter->stats.prc127;
+ regs_buff[76] = adapter->stats.prc255;
+ regs_buff[77] = adapter->stats.prc511;
+ regs_buff[78] = adapter->stats.prc1023;
+ regs_buff[79] = adapter->stats.prc1522;
+ regs_buff[80] = adapter->stats.gprc;
+ regs_buff[81] = adapter->stats.bprc;
+ regs_buff[82] = adapter->stats.mprc;
+ regs_buff[83] = adapter->stats.gptc;
+ regs_buff[84] = adapter->stats.gorc;
+ regs_buff[86] = adapter->stats.gotc;
+ regs_buff[88] = adapter->stats.rnbc;
+ regs_buff[89] = adapter->stats.ruc;
+ regs_buff[90] = adapter->stats.rfc;
+ regs_buff[91] = adapter->stats.roc;
+ regs_buff[92] = adapter->stats.rjc;
+ regs_buff[93] = adapter->stats.mgprc;
+ regs_buff[94] = adapter->stats.mgpdc;
+ regs_buff[95] = adapter->stats.mgptc;
+ regs_buff[96] = adapter->stats.tor;
+ regs_buff[98] = adapter->stats.tot;
+ regs_buff[100] = adapter->stats.tpr;
+ regs_buff[101] = adapter->stats.tpt;
+ regs_buff[102] = adapter->stats.ptc64;
+ regs_buff[103] = adapter->stats.ptc127;
+ regs_buff[104] = adapter->stats.ptc255;
+ regs_buff[105] = adapter->stats.ptc511;
+ regs_buff[106] = adapter->stats.ptc1023;
+ regs_buff[107] = adapter->stats.ptc1522;
+ regs_buff[108] = adapter->stats.mptc;
+ regs_buff[109] = adapter->stats.bptc;
+ regs_buff[110] = adapter->stats.tsctc;
+ regs_buff[111] = adapter->stats.iac;
+ regs_buff[112] = adapter->stats.rpthc;
+ regs_buff[113] = adapter->stats.hgptc;
+ regs_buff[114] = adapter->stats.hgorc;
+ regs_buff[116] = adapter->stats.hgotc;
+ regs_buff[118] = adapter->stats.lenerrs;
+ regs_buff[119] = adapter->stats.scvpc;
+ regs_buff[120] = adapter->stats.hrmpc;
+
+ for (i = 0; i < 4; i++)
+ regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[129 + i] = rd32(E1000_RDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[133 + i] = rd32(E1000_RDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[137 + i] = rd32(E1000_RDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[141 + i] = rd32(E1000_RDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[145 + i] = rd32(E1000_RDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
+
+ for (i = 0; i < 10; i++)
+ regs_buff[153 + i] = rd32(E1000_EITR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[163 + i] = rd32(E1000_IMIR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[179 + i] = rd32(E1000_RAL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[195 + i] = rd32(E1000_RAH(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[211 + i] = rd32(E1000_TDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[215 + i] = rd32(E1000_TDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[219 + i] = rd32(E1000_TDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[223 + i] = rd32(E1000_TDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[227 + i] = rd32(E1000_TDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
+
+ regs_buff[547] = rd32(E1000_TDFH);
+ regs_buff[548] = rd32(E1000_TDFT);
+ regs_buff[549] = rd32(E1000_TDFHS);
+ regs_buff[550] = rd32(E1000_TDFPC);
+
+ if (hw->mac.type > e1000_82580) {
+ regs_buff[551] = adapter->stats.o2bgptc;
+ regs_buff[552] = adapter->stats.b2ospc;
+ regs_buff[553] = adapter->stats.o2bspc;
+ regs_buff[554] = adapter->stats.b2ogprc;
+ }
+
+ if (hw->mac.type != e1000_82576)
+ return;
+ for (i = 0; i < 12; i++)
+ regs_buff[555 + i] = rd32(E1000_SRRCTL(i + 4));
+ for (i = 0; i < 4; i++)
+ regs_buff[567 + i] = rd32(E1000_PSRTYPE(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[571 + i] = rd32(E1000_RDBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[583 + i] = rd32(E1000_RDBAH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[595 + i] = rd32(E1000_RDLEN(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[607 + i] = rd32(E1000_RDH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[619 + i] = rd32(E1000_RDT(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[631 + i] = rd32(E1000_RXDCTL(i + 4));
+
+ for (i = 0; i < 12; i++)
+ regs_buff[643 + i] = rd32(E1000_TDBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[655 + i] = rd32(E1000_TDBAH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[667 + i] = rd32(E1000_TDLEN(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[679 + i] = rd32(E1000_TDH(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[691 + i] = rd32(E1000_TDT(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[703 + i] = rd32(E1000_TXDCTL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[715 + i] = rd32(E1000_TDWBAL(i + 4));
+ for (i = 0; i < 12; i++)
+ regs_buff[727 + i] = rd32(E1000_TDWBAH(i + 4));
+}
+
+static int igb_get_eeprom_len(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.nvm.word_size * 2;
+}
+
+static int igb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->nvm.type == e1000_nvm_eeprom_spi)
+ ret_val = hw->nvm.ops.read(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int igb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if ((hw->mac.type >= e1000_i210) &&
+ !igb_get_flash_presence_i210(hw)) {
+ return -EOPNOTSUPP;
+ }
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->nvm.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word
+ * only the second byte of the word is being modified
+ */
+ ret_val = hw->nvm.ops.read(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word
+ * only the first byte of the word is being modified
+ */
+ ret_val = hw->nvm.ops.read(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = hw->nvm.ops.write(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum if nvm write succeeded */
+ if (ret_val == 0)
+ hw->nvm.ops.update(hw);
+
+ igb_set_fw_version(adapter);
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void igb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ strlcpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version));
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 82575 controllers
+ */
+ strlcpy(drvinfo->fw_version, adapter->fw_version,
+ sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->n_stats = IGB_STATS_LEN;
+ drvinfo->testinfo_len = IGB_TEST_LEN;
+ drvinfo->regdump_len = igb_get_regs_len(netdev);
+ drvinfo->eedump_len = igb_get_eeprom_len(netdev);
+}
+
+static void igb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ ring->rx_max_pending = IGB_MAX_RXD;
+ ring->tx_max_pending = IGB_MAX_TXD;
+ ring->rx_pending = adapter->rx_ring_count;
+ ring->tx_pending = adapter->tx_ring_count;
+}
+
+static int igb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *temp_ring;
+ int i, err = 0;
+ u16 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
+ new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
+ new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring_count) &&
+ (new_rx_count == adapter->rx_ring_count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
+ if (adapter->num_tx_queues > adapter->num_rx_queues)
+ temp_ring = vmalloc(adapter->num_tx_queues *
+ sizeof(struct igb_ring));
+ else
+ temp_ring = vmalloc(adapter->num_rx_queues *
+ sizeof(struct igb_ring));
+
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igb_down(adapter);
+
+ /* We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the Tx and Rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring_count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->tx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_tx_count;
+ err = igb_setup_tx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_tx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+ }
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ igb_free_tx_resources(adapter->tx_ring[i]);
+
+ memcpy(adapter->tx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->tx_ring_count = new_tx_count;
+ }
+
+ if (new_rx_count != adapter->rx_ring_count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->rx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_rx_count;
+ err = igb_setup_rx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_rx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ igb_free_rx_resources(adapter->rx_ring[i]);
+
+ memcpy(adapter->rx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->rx_ring_count = new_rx_count;
+ }
+err_setup:
+ igb_up(adapter);
+ vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return err;
+}
+
+/* ethtool register test data */
+struct igb_reg_test {
+ u16 reg;
+ u16 reg_offset;
+ u16 array_len;
+ u16 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x100 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* i210 reg test */
+static struct igb_reg_test reg_test_i210[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i210, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x900FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0, 0 }
+};
+
+/* i350 reg test */
+static struct igb_reg_test reg_test_i350[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i350, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82580 reg test */
+static struct igb_reg_test reg_test_82580[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* RDH is read-only for 82580, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82576 reg test */
+static struct igb_reg_test reg_test_82576[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* Enable all RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82576, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82575 register test */
+static struct igb_reg_test reg_test_82575[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* Enable all four RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0,
+ E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82575, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pat, val;
+ static const u32 _test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
+ wr32(reg, (_test[pat] & write));
+ val = rd32(reg) & mask;
+ if (val != (_test[pat] & write & mask)) {
+ dev_err(&adapter->pdev->dev,
+ "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+ reg, val, (_test[pat] & write & mask));
+ *data = reg;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 val;
+
+ wr32(reg, write & mask);
+ val = rd32(reg);
+ if ((write & mask) != (val & mask)) {
+ dev_err(&adapter->pdev->dev,
+ "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+ reg, (val & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_test *test;
+ u32 value, before, after;
+ u32 i, toggle;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_i350:
+ case e1000_i354:
+ test = reg_test_i350;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ test = reg_test_i210;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82580:
+ test = reg_test_82580;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82576:
+ test = reg_test_82576;
+ toggle = 0x7FFFF3FF;
+ break;
+ default:
+ test = reg_test_82575;
+ toggle = 0x7FFFF3FF;
+ break;
+ }
+
+ /* Because the status register is such a special case,
+ * we handle it separately from the rest of the register
+ * tests. Some bits are read-only, some toggle, and some
+ * are writable on newer MACs.
+ */
+ before = rd32(E1000_STATUS);
+ value = (rd32(E1000_STATUS) & toggle);
+ wr32(E1000_STATUS, toggle);
+ after = rd32(E1000_STATUS) & toggle;
+ if (value != after) {
+ dev_err(&adapter->pdev->dev,
+ "failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+ after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ wr32(E1000_STATUS, before);
+
+ /* Perform the remainder of the register test, looping through
+ * the test table until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * test->reg_offset));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return 0;
+}
+
+static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* Validate eeprom on all parts but flashless */
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (igb_get_flash_presence_i210(hw)) {
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ }
+ break;
+ default:
+ if (adapter->hw.nvm.ops.validate(&adapter->hw) < 0)
+ *data = 2;
+ break;
+ }
+
+ return *data;
+}
+
+static irqreturn_t igb_test_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= rd32(E1000_ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, ics_mask, i = 0, shared_int = true;
+ u32 irq = adapter->pdev->irq;
+
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ if (request_irq(adapter->msix_entries[0].vector,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ shared_int = false;
+ if (request_irq(irq,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, adapter)) {
+ shared_int = false;
+ } else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
+ netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ /* Define all writable bits for ICS */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ ics_mask = 0x37F47EDD;
+ break;
+ case e1000_82576:
+ ics_mask = 0x77D4FBFD;
+ break;
+ case e1000_82580:
+ ics_mask = 0x77DCFED5;
+ break;
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ ics_mask = 0x77DCFED5;
+ break;
+ default:
+ ics_mask = 0x7FFFFFFF;
+ break;
+ }
+
+ /* Test each interrupt */
+ for (; i < 31; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!(mask & ics_mask))
+ continue;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMS, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, ~mask);
+ wr32(E1000_ICS, ~mask);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ if (adapter->test_icr & mask) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ usleep_range(10000, 11000);
+
+ /* Unhook test interrupt handler */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ free_irq(adapter->msix_entries[0].vector, adapter);
+ else
+ free_irq(irq, adapter);
+
+ return *data;
+}
+
+static void igb_free_desc_rings(struct igb_adapter *adapter)
+{
+ igb_free_tx_resources(&adapter->test_tx_ring);
+ igb_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int igb_setup_desc_rings(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+ tx_ring->count = IGB_DEFAULT_TXD;
+ tx_ring->dev = &adapter->pdev->dev;
+ tx_ring->netdev = adapter->netdev;
+ tx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_tx_resources(tx_ring)) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ igb_setup_tctl(adapter);
+ igb_configure_tx_ring(adapter, tx_ring);
+
+ /* Setup Rx descriptor ring and Rx buffers */
+ rx_ring->count = IGB_DEFAULT_RXD;
+ rx_ring->dev = &adapter->pdev->dev;
+ rx_ring->netdev = adapter->netdev;
+ rx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_rx_resources(rx_ring)) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+
+ /* set the default queue to queue 0 of PF */
+ wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
+
+ /* enable receive ring */
+ igb_setup_rctl(adapter);
+ igb_configure_rx_ring(adapter, rx_ring);
+
+ igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring));
+
+ return 0;
+
+err_nomem:
+ igb_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void igb_phy_disable_receiver(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ igb_write_phy_reg(hw, 29, 0x001F);
+ igb_write_phy_reg(hw, 30, 0x8FFC);
+ igb_write_phy_reg(hw, 29, 0x001A);
+ igb_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+
+ hw->mac.autoneg = false;
+
+ if (hw->phy.type == e1000_phy_m88) {
+ if (hw->phy.id != I210_I_PHY_ID) {
+ /* Auto-MDI/MDIX Off */
+ igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
+ /* autoneg off */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+ } else {
+ /* force 1000, set loopback */
+ igb_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0);
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+ }
+ } else if (hw->phy.type == e1000_phy_82580) {
+ /* enable MII loopback */
+ igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+ }
+
+ /* add small delay to avoid loopback test failure */
+ msleep(50);
+
+ /* force 1000, set loopback */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD | /* Force Duplex to FULL */
+ E1000_CTRL_SLU); /* Set link up enable bit */
+
+ if (hw->phy.type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy.type == e1000_phy_m88)
+ igb_phy_disable_receiver(adapter);
+
+ mdelay(500);
+ return 0;
+}
+
+static int igb_set_phy_loopback(struct igb_adapter *adapter)
+{
+ return igb_integrated_phy_loopback(adapter);
+}
+
+static int igb_setup_loopback_test(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ reg = rd32(E1000_CTRL_EXT);
+
+ /* use CTRL_EXT to identify link type as SGMII can appear as copper */
+ if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP) ||
+ (hw->device_id == E1000_DEV_ID_I354_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_I354_BACKPLANE_2_5GBPS)) {
+ /* Enable DH89xxCC MPHY for near end loopback */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ reg = rd32(E1000_RCTL);
+ reg |= E1000_RCTL_LBM_TCVR;
+ wr32(E1000_RCTL, reg);
+
+ wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK);
+
+ reg = rd32(E1000_CTRL);
+ reg &= ~(E1000_CTRL_RFCE |
+ E1000_CTRL_TFCE |
+ E1000_CTRL_LRST);
+ reg |= E1000_CTRL_SLU |
+ E1000_CTRL_FD;
+ wr32(E1000_CTRL, reg);
+
+ /* Unset switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg &= ~E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+
+ /* Unset sigdetect for SERDES loopback on
+ * 82580 and newer devices.
+ */
+ if (hw->mac.type >= e1000_82580) {
+ reg = rd32(E1000_PCS_CFG0);
+ reg |= E1000_PCS_CFG_IGN_SD;
+ wr32(E1000_PCS_CFG0, reg);
+ }
+
+ /* Set PCS register for forced speed */
+ reg = rd32(E1000_PCS_LCTL);
+ reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/
+ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
+ E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
+ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
+ E1000_PCS_LCTL_FSD | /* Force Speed */
+ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
+ wr32(E1000_PCS_LCTL, reg);
+
+ return 0;
+ }
+
+ return igb_set_phy_loopback(adapter);
+}
+
+static void igb_loopback_cleanup(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP) ||
+ (hw->device_id == E1000_DEV_ID_I354_SGMII)) {
+ u32 reg;
+
+ /* Disable near end loopback on DH89xxCC */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ wr32(E1000_RCTL, rctl);
+
+ hw->mac.autoneg = true;
+ igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
+ igb_phy_sw_reset(hw);
+ }
+}
+
+static void igb_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size /= 2;
+ memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+ memset(&skb->data[frame_size + 10], 0xBE, 1);
+ memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer,
+ unsigned int frame_size)
+{
+ unsigned char *data;
+ bool match = true;
+
+ frame_size >>= 1;
+
+ data = kmap(rx_buffer->page);
+
+ if (data[3] != 0xFF ||
+ data[frame_size + 10] != 0xBE ||
+ data[frame_size + 12] != 0xAF)
+ match = false;
+
+ kunmap(rx_buffer->page);
+
+ return match;
+}
+
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+ struct igb_ring *tx_ring,
+ unsigned int size)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_rx_buffer *rx_buffer_info;
+ struct igb_tx_buffer *tx_buffer_info;
+ u16 rx_ntc, tx_ntc, count = 0;
+
+ /* initialize next to clean and descriptor values */
+ rx_ntc = rx_ring->next_to_clean;
+ tx_ntc = tx_ring->next_to_clean;
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+
+ while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) {
+ /* check Rx buffer */
+ rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
+
+ /* sync Rx buffer for CPU read */
+ dma_sync_single_for_cpu(rx_ring->dev,
+ rx_buffer_info->dma,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* verify contents of skb */
+ if (igb_check_lbtest_frame(rx_buffer_info, size))
+ count++;
+
+ /* sync Rx buffer for device write */
+ dma_sync_single_for_device(rx_ring->dev,
+ rx_buffer_info->dma,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* unmap buffer on Tx side */
+ tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
+ igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+
+ /* increment Rx/Tx next to clean counters */
+ rx_ntc++;
+ if (rx_ntc == rx_ring->count)
+ rx_ntc = 0;
+ tx_ntc++;
+ if (tx_ntc == tx_ring->count)
+ tx_ntc = 0;
+
+ /* fetch next descriptor */
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ntc);
+ }
+
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ /* re-map buffers to ring, store next to clean values */
+ igb_alloc_rx_buffers(rx_ring, count);
+ rx_ring->next_to_clean = rx_ntc;
+ tx_ring->next_to_clean = tx_ntc;
+
+ return count;
+}
+
+static int igb_run_loopback_test(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ u16 i, j, lc, good_cnt;
+ int ret_val = 0;
+ unsigned int size = IGB_RX_HDR_LEN;
+ netdev_tx_t tx_ret_val;
+ struct sk_buff *skb;
+
+ /* allocate test skb */
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb)
+ return 11;
+
+ /* place data into test skb */
+ igb_create_lbtest_frame(skb, size);
+ skb_put(skb, size);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ /* reset count of good packets */
+ good_cnt = 0;
+
+ /* place 64 packets on the transmit queue*/
+ for (i = 0; i < 64; i++) {
+ skb_get(skb);
+ tx_ret_val = igb_xmit_frame_ring(skb, tx_ring);
+ if (tx_ret_val == NETDEV_TX_OK)
+ good_cnt++;
+ }
+
+ if (good_cnt != 64) {
+ ret_val = 12;
+ break;
+ }
+
+ /* allow 200 milliseconds for packets to go from Tx to Rx */
+ msleep(200);
+
+ good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+ if (good_cnt != 64) {
+ ret_val = 13;
+ break;
+ }
+ } /* end loop count loop */
+
+ /* free the original skb */
+ kfree_skb(skb);
+
+ return ret_val;
+}
+
+static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
+{
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active
+ */
+ if (igb_check_reset_block(&adapter->hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot do PHY loopback test when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+
+ if (adapter->hw.mac.type == e1000_i354) {
+ dev_info(&adapter->pdev->dev,
+ "Loopback test not supported on i354.\n");
+ *data = 0;
+ goto out;
+ }
+ *data = igb_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = igb_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = igb_run_loopback_test(adapter);
+ igb_loopback_cleanup(adapter);
+
+err_loopback:
+ igb_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int igb_link_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+
+ hw->mac.serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes
+ */
+ do {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.autoneg)
+ msleep(5000);
+
+ if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
+ *data = 1;
+ }
+ return *data;
+}
+
+static void igb_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u16 autoneg_advertised;
+ u8 forced_speed_duplex, autoneg;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IGB_TESTING, &adapter->state);
+
+ /* can't do offline tests on media switching devices */
+ if (adapter->hw.dev_spec._82575.mas_capable)
+ eth_test->flags &= ~ETH_TEST_FL_OFFLINE;
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+ autoneg = adapter->hw.mac.autoneg;
+
+ dev_info(&adapter->pdev->dev, "offline testing starting\n");
+
+ /* power up link for link test */
+ igb_power_up_link(adapter);
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
+ if (igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ igb_reset(adapter);
+
+ if (igb_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ /* power up link for loopback test */
+ igb_power_up_link(adapter);
+ if (igb_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+ adapter->hw.mac.autoneg = autoneg;
+
+ /* force this routine to wait until autoneg complete/timeout */
+ adapter->hw.phy.autoneg_wait_to_complete = true;
+ igb_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = false;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ dev_info(&adapter->pdev->dev, "online testing starting\n");
+
+ /* PHY is powered down when interface is down */
+ if (if_running && igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ else
+ data[4] = 0;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ wol->wolopts = 0;
+
+ if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
+ return;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY;
+
+ /* apply any specific unsupported masks here */
+ switch (adapter->hw.device_id) {
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & E1000_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+}
+
+static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= E1000_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* bit defines for adapter->led_status */
+#define IGB_LED_ON 0
+
+static int igb_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ igb_blink_led(hw);
+ return 2;
+ case ETHTOOL_ID_ON:
+ igb_blink_led(hw);
+ break;
+ case ETHTOOL_ID_OFF:
+ igb_led_off(hw);
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ igb_led_off(hw);
+ clear_bit(IGB_LED_ON, &adapter->led_status);
+ igb_cleanup_led(hw);
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->tx_coalesce_usecs > 3) &&
+ (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->tx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+ return -EINVAL;
+
+ /* If ITR is disabled, disable DMAC */
+ if (ec->rx_coalesce_usecs == 0) {
+ if (adapter->flags & IGB_FLAG_DMAC)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ }
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+ else
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+ /* convert to rate of irq's per second */
+ if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+ adapter->tx_itr_setting = adapter->rx_itr_setting;
+ else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+ else
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+ if (q_vector->rx.ring)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ else
+ q_vector->itr_val = adapter->tx_itr_setting;
+ if (q_vector->itr_val && q_vector->itr_val <= 3)
+ q_vector->itr_val = IGB_START_ITR;
+ q_vector->set_itr = 1;
+ }
+
+ return 0;
+}
+
+static int igb_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->rx_itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+ else
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+ if (adapter->tx_itr_setting <= 3)
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+ else
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+ }
+
+ return 0;
+}
+
+static int igb_nway_reset(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ return 0;
+}
+
+static int igb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IGB_STATS_LEN;
+ case ETH_SS_TEST:
+ return IGB_TEST_LEN;
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static void igb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct rtnl_link_stats64 *net_stats = &adapter->stats64;
+ unsigned int start;
+ struct igb_ring *ring;
+ int i, j;
+ char *p;
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, net_stats);
+
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
+ data[i] = (igb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
+ p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
+ data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < adapter->num_tx_queues; j++) {
+ u64 restart2;
+
+ ring = adapter->tx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
+ data[i] = ring->tx_stats.packets;
+ data[i+1] = ring->tx_stats.bytes;
+ data[i+2] = ring->tx_stats.restart_queue;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp2);
+ restart2 = ring->tx_stats.restart_queue2;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp2, start));
+ data[i+2] += restart2;
+
+ i += IGB_TX_QUEUE_STATS_LEN;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ ring = adapter->rx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
+ data[i] = ring->rx_stats.packets;
+ data[i+1] = ring->rx_stats.bytes;
+ data[i+2] = ring->rx_stats.drops;
+ data[i+3] = ring->rx_stats.csum_err;
+ data[i+4] = ring->rx_stats.alloc_failed;
+ } while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
+ i += IGB_RX_QUEUE_STATS_LEN;
+ }
+ spin_unlock(&adapter->stats64_lock);
+}
+
+static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igb_gstrings_test,
+ IGB_TEST_LEN*ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_net_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_restart", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_drops", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_csum_err", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_alloc_failed", i);
+ p += ETH_GSTRING_LEN;
+ }
+ /* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static int igb_get_ts_info(struct net_device *dev,
+ struct ethtool_ts_info *info)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+
+ if (adapter->ptp_clock)
+ info->phc_index = ptp_clock_index(adapter->ptp_clock);
+ else
+ info->phc_index = -1;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82575:
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
+ return 0;
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ info->tx_types =
+ (1 << HWTSTAMP_TX_OFF) |
+ (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = 1 << HWTSTAMP_FILTER_NONE;
+
+ /* 82576 does not support timestamping all packets. */
+ if (adapter->hw.mac.type >= e1000_82580)
+ info->rx_filters |= 1 << HWTSTAMP_FILTER_ALL;
+ else
+ info->rx_filters |=
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int igb_get_rss_hash_opts(struct igb_adapter *adapter,
+ struct ethtool_rxnfc *cmd)
+{
+ cmd->data = 0;
+
+ /* Report default options for RSS on igb */
+ switch (cmd->flow_type) {
+ case TCP_V4_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case UDP_V4_FLOW:
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case SCTP_V4_FLOW:
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case IPV4_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case TCP_V6_FLOW:
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case UDP_V6_FLOW:
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ /* Fall through */
+ case SCTP_V6_FLOW:
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case IPV6_FLOW:
+ cmd->data |= RXH_IP_SRC | RXH_IP_DST;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+ u32 *rule_locs)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = adapter->num_rx_queues;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXFH:
+ ret = igb_get_rss_hash_opts(adapter, cmd);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+#define UDP_RSS_FLAGS (IGB_FLAG_RSS_FIELD_IPV4_UDP | \
+ IGB_FLAG_RSS_FIELD_IPV6_UDP)
+static int igb_set_rss_hash_opt(struct igb_adapter *adapter,
+ struct ethtool_rxnfc *nfc)
+{
+ u32 flags = adapter->flags;
+
+ /* RSS does not support anything other than hashing
+ * to queues on src and dst IPs and ports
+ */
+ if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3))
+ return -EINVAL;
+
+ switch (nfc->flow_type) {
+ case TCP_V4_FLOW:
+ case TCP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST) ||
+ !(nfc->data & RXH_L4_B_0_1) ||
+ !(nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ break;
+ case UDP_V4_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST))
+ return -EINVAL;
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ flags &= ~IGB_FLAG_RSS_FIELD_IPV4_UDP;
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ flags |= IGB_FLAG_RSS_FIELD_IPV4_UDP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case UDP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST))
+ return -EINVAL;
+ switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
+ case 0:
+ flags &= ~IGB_FLAG_RSS_FIELD_IPV6_UDP;
+ break;
+ case (RXH_L4_B_0_1 | RXH_L4_B_2_3):
+ flags |= IGB_FLAG_RSS_FIELD_IPV6_UDP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case AH_ESP_V4_FLOW:
+ case AH_V4_FLOW:
+ case ESP_V4_FLOW:
+ case SCTP_V4_FLOW:
+ case AH_ESP_V6_FLOW:
+ case AH_V6_FLOW:
+ case ESP_V6_FLOW:
+ case SCTP_V6_FLOW:
+ if (!(nfc->data & RXH_IP_SRC) ||
+ !(nfc->data & RXH_IP_DST) ||
+ (nfc->data & RXH_L4_B_0_1) ||
+ (nfc->data & RXH_L4_B_2_3))
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* if we changed something we need to update flags */
+ if (flags != adapter->flags) {
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc = rd32(E1000_MRQC);
+
+ if ((flags & UDP_RSS_FLAGS) &&
+ !(adapter->flags & UDP_RSS_FLAGS))
+ dev_err(&adapter->pdev->dev,
+ "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n");
+
+ adapter->flags = flags;
+
+ /* Perform hash on these packet types */
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP;
+
+ mrqc &= ~(E1000_MRQC_RSS_FIELD_IPV4_UDP |
+ E1000_MRQC_RSS_FIELD_IPV6_UDP);
+
+ if (flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
+
+ if (flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
+
+ wr32(E1000_MRQC, mrqc);
+ }
+
+ return 0;
+}
+
+static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_SRXFH:
+ ret = igb_set_rss_hash_opt(adapter, cmd);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ret_val;
+ u16 phy_data;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ return -EOPNOTSUPP;
+
+ edata->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full);
+ if (!hw->dev_spec._82575.eee_disable)
+ edata->advertised =
+ mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+
+ /* The IPCNFG and EEER registers are not supported on I354. */
+ if (hw->mac.type == e1000_i354) {
+ igb_get_eee_status_i354(hw, (bool *)&edata->eee_active);
+ } else {
+ u32 eeer;
+
+ eeer = rd32(E1000_EEER);
+
+ /* EEE status on negotiated link */
+ if (eeer & E1000_EEER_EEE_NEG)
+ edata->eee_active = true;
+
+ if (eeer & E1000_EEER_TX_LPI_EN)
+ edata->tx_lpi_enabled = true;
+ }
+
+ /* EEE Link Partner Advertised */
+ switch (hw->mac.type) {
+ case e1000_i350:
+ ret_val = igb_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+ break;
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210,
+ E1000_EEE_LP_ADV_DEV_I210,
+ &phy_data);
+ if (ret_val)
+ return -ENODATA;
+
+ edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+ break;
+ default:
+ break;
+ }
+
+ edata->eee_enabled = !hw->dev_spec._82575.eee_disable;
+
+ if ((hw->mac.type == e1000_i354) &&
+ (edata->eee_enabled))
+ edata->tx_lpi_enabled = true;
+
+ /* Report correct negotiated EEE status for devices that
+ * wrongly report EEE at half-duplex
+ */
+ if (adapter->link_duplex == HALF_DUPLEX) {
+ edata->eee_enabled = false;
+ edata->eee_active = false;
+ edata->tx_lpi_enabled = false;
+ edata->advertised &= ~edata->advertised;
+ }
+
+ return 0;
+}
+
+static int igb_set_eee(struct net_device *netdev,
+ struct ethtool_eee *edata)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_curr;
+ bool adv1g_eee = true, adv100m_eee = true;
+ s32 ret_val;
+
+ if ((hw->mac.type < e1000_i350) ||
+ (hw->phy.media_type != e1000_media_type_copper))
+ return -EOPNOTSUPP;
+
+ memset(&eee_curr, 0, sizeof(struct ethtool_eee));
+
+ ret_val = igb_get_eee(netdev, &eee_curr);
+ if (ret_val)
+ return ret_val;
+
+ if (eee_curr.eee_enabled) {
+ if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ /* Tx LPI timer is not implemented currently */
+ if (edata->tx_lpi_timer) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+
+ if (!edata->advertised || (edata->advertised &
+ ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL))) {
+ dev_err(&adapter->pdev->dev,
+ "EEE Advertisement supports only 100Tx and/or 100T full duplex\n");
+ return -EINVAL;
+ }
+ adv100m_eee = !!(edata->advertised & ADVERTISE_100_FULL);
+ adv1g_eee = !!(edata->advertised & ADVERTISE_1000_FULL);
+
+ } else if (!edata->eee_enabled) {
+ dev_err(&adapter->pdev->dev,
+ "Setting EEE options are not supported with EEE disabled\n");
+ return -EINVAL;
+ }
+
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+ if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) {
+ hw->dev_spec._82575.eee_disable = !edata->eee_enabled;
+ adapter->flags |= IGB_FLAG_EEE;
+
+ /* reset link */
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ else
+ igb_reset(adapter);
+ }
+
+ if (hw->mac.type == e1000_i354)
+ ret_val = igb_set_eee_i354(hw, adv1g_eee, adv100m_eee);
+ else
+ ret_val = igb_set_eee_i350(hw, adv1g_eee, adv100m_eee);
+
+ if (ret_val) {
+ dev_err(&adapter->pdev->dev,
+ "Problem setting EEE advertisement options\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = 0;
+ u16 sff8472_rev, addr_mode;
+ bool page_swap = false;
+
+ if ((hw->phy.media_type == e1000_media_type_copper) ||
+ (hw->phy.media_type == e1000_media_type_unknown))
+ return -EOPNOTSUPP;
+
+ /* Check whether we support SFF-8472 or not */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev);
+ if (status)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode);
+ if (status)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) {
+ hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
+ page_swap = true;
+ }
+
+ if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) {
+ /* We have an SFP, but it does not support SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else {
+ /* We have an SFP which supports a revision of SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = 0;
+ u16 *dataword;
+ u16 first_word, last_word;
+ int i = 0;
+
+ if (ee->len == 0)
+ return -EINVAL;
+
+ first_word = ee->offset >> 1;
+ last_word = (ee->offset + ee->len - 1) >> 1;
+
+ dataword = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
+ if (!dataword)
+ return -ENOMEM;
+
+ /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
+ if (status) {
+ /* Error occurred while reading module */
+ kfree(dataword);
+ return -EIO;
+ }
+
+ be16_to_cpus(&dataword[i]);
+ }
+
+ memcpy(data, (u8 *)dataword + (ee->offset & 1), ee->len);
+ kfree(dataword);
+
+ return 0;
+}
+
+static int igb_ethtool_begin(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_get_sync(&adapter->pdev->dev);
+ return 0;
+}
+
+static void igb_ethtool_complete(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_put(&adapter->pdev->dev);
+}
+
+static u32 igb_get_rxfh_indir_size(struct net_device *netdev)
+{
+ return IGB_RETA_SIZE;
+}
+
+static int igb_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ indir[i] = adapter->rss_indir_tbl[i];
+
+ return 0;
+}
+
+void igb_write_rss_indir_tbl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg = E1000_RETA(0);
+ u32 shift = 0;
+ int i = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ shift = 6;
+ break;
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ shift = 3;
+ break;
+ default:
+ break;
+ }
+
+ while (i < IGB_RETA_SIZE) {
+ u32 val = 0;
+ int j;
+
+ for (j = 3; j >= 0; j--) {
+ val <<= 8;
+ val |= adapter->rss_indir_tbl[i + j];
+ }
+
+ wr32(reg, val << shift);
+ reg += 4;
+ i += 4;
+ }
+}
+
+static int igb_set_rxfh(struct net_device *netdev, const u32 *indir,
+ const u8 *key)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+ u32 num_queues;
+
+ num_queues = adapter->rss_queues;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ num_queues = 2;
+ break;
+ default:
+ break;
+ }
+
+ /* Verify user input. */
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ if (indir[i] >= num_queues)
+ return -EINVAL;
+
+
+ for (i = 0; i < IGB_RETA_SIZE; i++)
+ adapter->rss_indir_tbl[i] = indir[i];
+
+ igb_write_rss_indir_tbl(adapter);
+
+ return 0;
+}
+
+static unsigned int igb_max_channels(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int max_combined = 0;
+
+ switch (hw->mac.type) {
+ case e1000_i211:
+ max_combined = IGB_MAX_RX_QUEUES_I211;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ max_combined = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ if (!!adapter->vfs_allocated_count) {
+ max_combined = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_combined = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
+ case e1000_i354:
+ default:
+ max_combined = IGB_MAX_RX_QUEUES;
+ break;
+ }
+
+ return max_combined;
+}
+
+static void igb_get_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ /* Report maximum channels */
+ ch->max_combined = igb_max_channels(adapter);
+
+ /* Report info for other vector */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ ch->max_other = NON_Q_VECTORS;
+ ch->other_count = NON_Q_VECTORS;
+ }
+
+ ch->combined_count = adapter->rss_queues;
+}
+
+static int igb_set_channels(struct net_device *netdev,
+ struct ethtool_channels *ch)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ unsigned int count = ch->combined_count;
+
+ /* Verify they are not requesting separate vectors */
+ if (!count || ch->rx_count || ch->tx_count)
+ return -EINVAL;
+
+ /* Verify other_count is valid and has not been changed */
+ if (ch->other_count != NON_Q_VECTORS)
+ return -EINVAL;
+
+ /* Verify the number of channels doesn't exceed hw limits */
+ if (count > igb_max_channels(adapter))
+ return -EINVAL;
+
+ if (count != adapter->rss_queues) {
+ adapter->rss_queues = count;
+
+ /* Hardware has to reinitialize queues and interrupts to
+ * match the new configuration.
+ */
+ return igb_reinit_queues(adapter);
+ }
+
+ return 0;
+}
+
+static const struct ethtool_ops igb_ethtool_ops = {
+ .get_settings = igb_get_settings,
+ .set_settings = igb_set_settings,
+ .get_drvinfo = igb_get_drvinfo,
+ .get_regs_len = igb_get_regs_len,
+ .get_regs = igb_get_regs,
+ .get_wol = igb_get_wol,
+ .set_wol = igb_set_wol,
+ .get_msglevel = igb_get_msglevel,
+ .set_msglevel = igb_set_msglevel,
+ .nway_reset = igb_nway_reset,
+ .get_link = igb_get_link,
+ .get_eeprom_len = igb_get_eeprom_len,
+ .get_eeprom = igb_get_eeprom,
+ .set_eeprom = igb_set_eeprom,
+ .get_ringparam = igb_get_ringparam,
+ .set_ringparam = igb_set_ringparam,
+ .get_pauseparam = igb_get_pauseparam,
+ .set_pauseparam = igb_set_pauseparam,
+ .self_test = igb_diag_test,
+ .get_strings = igb_get_strings,
+ .set_phys_id = igb_set_phys_id,
+ .get_sset_count = igb_get_sset_count,
+ .get_ethtool_stats = igb_get_ethtool_stats,
+ .get_coalesce = igb_get_coalesce,
+ .set_coalesce = igb_set_coalesce,
+ .get_ts_info = igb_get_ts_info,
+ .get_rxnfc = igb_get_rxnfc,
+ .set_rxnfc = igb_set_rxnfc,
+ .get_eee = igb_get_eee,
+ .set_eee = igb_set_eee,
+ .get_module_info = igb_get_module_info,
+ .get_module_eeprom = igb_get_module_eeprom,
+ .get_rxfh_indir_size = igb_get_rxfh_indir_size,
+ .get_rxfh = igb_get_rxfh,
+ .set_rxfh = igb_set_rxfh,
+ .get_channels = igb_get_channels,
+ .set_channels = igb_set_channels,
+ .begin = igb_ethtool_begin,
+ .complete = igb_ethtool_complete,
+};
+
+void igb_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &igb_ethtool_ops;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_hwmon-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,249 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "igb-3.18-ethercat.h"
+#include "e1000_82575-3.18-ethercat.h"
+#include "e1000_hw-3.18-ethercat.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_IGB_HWMON
+static struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
+/* hwmon callback functions */
+static ssize_t igb_hwmon_show_location(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ return sprintf(buf, "loc%u\n",
+ igb_attr->sensor->location);
+}
+
+static ssize_t igb_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value;
+
+ /* reset the temp field */
+ igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw);
+
+ value = igb_attr->sensor->temp;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_cautionthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->caution_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_maxopthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->max_op_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int igb_add_hwmon_attr(struct igb_adapter *adapter,
+ unsigned int offset, int type)
+{
+ int rc;
+ unsigned int n_attr;
+ struct hwmon_attr *igb_attr;
+
+ n_attr = adapter->igb_hwmon_buff->n_hwmon;
+ igb_attr = &adapter->igb_hwmon_buff->hwmon_list[n_attr];
+
+ switch (type) {
+ case IGB_HWMON_TYPE_LOC:
+ igb_attr->dev_attr.show = igb_hwmon_show_location;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_label", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_TEMP:
+ igb_attr->dev_attr.show = igb_hwmon_show_temp;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_input", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_CAUTION:
+ igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_max", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_MAX:
+ igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_crit", offset + 1);
+ break;
+ default:
+ rc = -EPERM;
+ return rc;
+ }
+
+ /* These always the same regardless of type */
+ igb_attr->sensor =
+ &adapter->hw.mac.thermal_sensor_data.sensor[offset];
+ igb_attr->hw = &adapter->hw;
+ igb_attr->dev_attr.store = NULL;
+ igb_attr->dev_attr.attr.mode = S_IRUGO;
+ igb_attr->dev_attr.attr.name = igb_attr->name;
+ sysfs_attr_init(&igb_attr->dev_attr.attr);
+
+ adapter->igb_hwmon_buff->attrs[n_attr] = &igb_attr->dev_attr.attr;
+
+ ++adapter->igb_hwmon_buff->n_hwmon;
+
+ return 0;
+}
+
+static void igb_sysfs_del_adapter(struct igb_adapter *adapter)
+{
+}
+
+/* called from igb_main.c */
+void igb_sysfs_exit(struct igb_adapter *adapter)
+{
+ igb_sysfs_del_adapter(adapter);
+}
+
+/* called from igb_main.c */
+int igb_sysfs_init(struct igb_adapter *adapter)
+{
+ struct hwmon_buff *igb_hwmon;
+ struct i2c_client *client;
+ struct device *hwmon_dev;
+ unsigned int i;
+ int rc = 0;
+
+ /* If this method isn't defined we don't support thermals */
+ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
+ goto exit;
+
+ /* Don't create thermal hwmon interface if no sensors present */
+ rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw));
+ if (rc)
+ goto exit;
+
+ igb_hwmon = devm_kzalloc(&adapter->pdev->dev, sizeof(*igb_hwmon),
+ GFP_KERNEL);
+ if (!igb_hwmon) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+ adapter->igb_hwmon_buff = igb_hwmon;
+
+ for (i = 0; i < E1000_MAX_SENSORS; i++) {
+
+ /* Only create hwmon sysfs entries for sensors that have
+ * meaningful data.
+ */
+ if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+ continue;
+
+ /* Bail if any hwmon attr struct fails to initialize */
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX);
+ if (rc)
+ goto exit;
+ }
+
+ /* init i2c_client */
+ client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+ if (client == NULL) {
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device.\n");
+ rc = -ENODEV;
+ goto exit;
+ }
+ adapter->i2c_client = client;
+
+ igb_hwmon->groups[0] = &igb_hwmon->group;
+ igb_hwmon->group.attrs = igb_hwmon->attrs;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&adapter->pdev->dev,
+ client->name,
+ igb_hwmon,
+ igb_hwmon->groups);
+ if (IS_ERR(hwmon_dev)) {
+ rc = PTR_ERR(hwmon_dev);
+ goto err;
+ }
+
+ goto exit;
+
+err:
+ igb_sysfs_del_adapter(adapter);
+exit:
+ return rc;
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_hwmon-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,249 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "igb.h"
+#include "e1000_82575.h"
+#include "e1000_hw.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_IGB_HWMON
+static struct i2c_board_info i350_sensor_info = {
+ I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
+/* hwmon callback functions */
+static ssize_t igb_hwmon_show_location(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ return sprintf(buf, "loc%u\n",
+ igb_attr->sensor->location);
+}
+
+static ssize_t igb_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value;
+
+ /* reset the temp field */
+ igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw);
+
+ value = igb_attr->sensor->temp;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_cautionthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->caution_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_maxopthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->max_op_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int igb_add_hwmon_attr(struct igb_adapter *adapter,
+ unsigned int offset, int type)
+{
+ int rc;
+ unsigned int n_attr;
+ struct hwmon_attr *igb_attr;
+
+ n_attr = adapter->igb_hwmon_buff->n_hwmon;
+ igb_attr = &adapter->igb_hwmon_buff->hwmon_list[n_attr];
+
+ switch (type) {
+ case IGB_HWMON_TYPE_LOC:
+ igb_attr->dev_attr.show = igb_hwmon_show_location;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_label", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_TEMP:
+ igb_attr->dev_attr.show = igb_hwmon_show_temp;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_input", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_CAUTION:
+ igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_max", offset + 1);
+ break;
+ case IGB_HWMON_TYPE_MAX:
+ igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_crit", offset + 1);
+ break;
+ default:
+ rc = -EPERM;
+ return rc;
+ }
+
+ /* These always the same regardless of type */
+ igb_attr->sensor =
+ &adapter->hw.mac.thermal_sensor_data.sensor[offset];
+ igb_attr->hw = &adapter->hw;
+ igb_attr->dev_attr.store = NULL;
+ igb_attr->dev_attr.attr.mode = S_IRUGO;
+ igb_attr->dev_attr.attr.name = igb_attr->name;
+ sysfs_attr_init(&igb_attr->dev_attr.attr);
+
+ adapter->igb_hwmon_buff->attrs[n_attr] = &igb_attr->dev_attr.attr;
+
+ ++adapter->igb_hwmon_buff->n_hwmon;
+
+ return 0;
+}
+
+static void igb_sysfs_del_adapter(struct igb_adapter *adapter)
+{
+}
+
+/* called from igb_main.c */
+void igb_sysfs_exit(struct igb_adapter *adapter)
+{
+ igb_sysfs_del_adapter(adapter);
+}
+
+/* called from igb_main.c */
+int igb_sysfs_init(struct igb_adapter *adapter)
+{
+ struct hwmon_buff *igb_hwmon;
+ struct i2c_client *client;
+ struct device *hwmon_dev;
+ unsigned int i;
+ int rc = 0;
+
+ /* If this method isn't defined we don't support thermals */
+ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
+ goto exit;
+
+ /* Don't create thermal hwmon interface if no sensors present */
+ rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw));
+ if (rc)
+ goto exit;
+
+ igb_hwmon = devm_kzalloc(&adapter->pdev->dev, sizeof(*igb_hwmon),
+ GFP_KERNEL);
+ if (!igb_hwmon) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+ adapter->igb_hwmon_buff = igb_hwmon;
+
+ for (i = 0; i < E1000_MAX_SENSORS; i++) {
+
+ /* Only create hwmon sysfs entries for sensors that have
+ * meaningful data.
+ */
+ if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+ continue;
+
+ /* Bail if any hwmon attr struct fails to initialize */
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP);
+ if (rc)
+ goto exit;
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX);
+ if (rc)
+ goto exit;
+ }
+
+ /* init i2c_client */
+ client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+ if (client == NULL) {
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device.\n");
+ rc = -ENODEV;
+ goto exit;
+ }
+ adapter->i2c_client = client;
+
+ igb_hwmon->groups[0] = &igb_hwmon->group;
+ igb_hwmon->group.attrs = igb_hwmon->attrs;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&adapter->pdev->dev,
+ client->name,
+ igb_hwmon,
+ igb_hwmon->groups);
+ if (IS_ERR(hwmon_dev)) {
+ rc = PTR_ERR(hwmon_dev);
+ goto err;
+ }
+
+ goto exit;
+
+err:
+ igb_sysfs_del_adapter(adapter);
+exit:
+ return rc;
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_main-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,8105 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/if_ether.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+#include <linux/pm_runtime.h>
+#ifdef CONFIG_IGB_DCA
+#include <linux/dca.h>
+#endif
+#include <linux/i2c.h>
+#include "igb-3.18-ethercat.h"
+
+#define MAJ 5
+#define MIN 2
+#define BUILD 15
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+__stringify(BUILD) "-k"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+ "Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] =
+ "Copyright (c) 2007-2014 Intel Corporation.";
+
+static const struct e1000_info *igb_info_tbl[] = {
+ [board_82575] = &e1000_82575_info,
+};
+
+static const struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void igb_remove(struct pci_dev *pdev);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure(struct igb_adapter *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_ring *);
+static void igb_set_rx_mode(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *);
+static void igb_setup_dca(struct igb_adapter *);
+#endif /* CONFIG_IGB_DCA */
+static int igb_poll(struct napi_struct *, int);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
+static bool igb_clean_rx_irq(struct igb_q_vector *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_mode(struct net_device *netdev,
+ netdev_features_t features);
+static int igb_vlan_rx_add_vid(struct net_device *, __be16, u16);
+static int igb_vlan_rx_kill_vid(struct net_device *, __be16, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
+static void igb_ping_all_vfs(struct igb_adapter *);
+static void igb_msg_task(struct igb_adapter *);
+static void igb_vmm_control(struct igb_adapter *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+ struct ifla_vf_info *ivi);
+static void igb_check_vf_rate_limit(struct igb_adapter *);
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf);
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs);
+#endif
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *);
+#endif
+static int igb_resume(struct device *);
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_suspend(struct device *dev);
+static int igb_runtime_resume(struct device *dev);
+static int igb_runtime_idle(struct device *dev);
+#endif
+static const struct dev_pm_ops igb_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
+ SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
+ igb_runtime_idle)
+};
+#endif
+static void igb_shutdown(struct pci_dev *);
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+#ifdef CONFIG_IGB_DCA
+static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+ .notifier_call = igb_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+ pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static const struct pci_error_handlers igb_err_handler = {
+ .error_detected = igb_io_error_detected,
+ .slot_reset = igb_io_slot_reset,
+ .resume = igb_io_resume,
+};
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = igb_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &igb_pm_ops,
+#endif
+ .shutdown = igb_shutdown,
+ .sriov_configure = igb_pci_sriov_configure,
+ .err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+struct igb_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct igb_reg_info igb_reg_info_tbl[] = {
+
+ /* General Registers */
+ {E1000_CTRL, "CTRL"},
+ {E1000_STATUS, "STATUS"},
+ {E1000_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {E1000_ICR, "ICR"},
+
+ /* RX Registers */
+ {E1000_RCTL, "RCTL"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
+ {E1000_RXDCTL(0), "RXDCTL"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {E1000_TCTL, "TCTL"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
+ {E1000_TXDCTL(0), "TXDCTL"},
+ {E1000_TDFH, "TDFH"},
+ {E1000_TDFT, "TDFT"},
+ {E1000_TDFHS, "TDFHS"},
+ {E1000_TDFPC, "TDFPC"},
+
+ /* List Terminator */
+ {}
+};
+
+/* igb_regdump - register printout routine */
+static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
+{
+ int n = 0;
+ char rname[16];
+ u32 regs[8];
+
+ switch (reginfo->ofs) {
+ case E1000_RDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDLEN(n));
+ break;
+ case E1000_RDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDH(n));
+ break;
+ case E1000_RDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDT(n));
+ break;
+ case E1000_RXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RXDCTL(n));
+ break;
+ case E1000_RDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_RDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAH(n));
+ break;
+ case E1000_TDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_TDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDBAH(n));
+ break;
+ case E1000_TDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDLEN(n));
+ break;
+ case E1000_TDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDH(n));
+ break;
+ case E1000_TDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDT(n));
+ break;
+ case E1000_TXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TXDCTL(n));
+ break;
+ default:
+ pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
+ return;
+ }
+
+ snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
+ pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
+ regs[2], regs[3]);
+}
+
+/* igb_dump - Print registers, Tx-rings and Rx-rings */
+static void igb_dump(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_info *reginfo;
+ struct igb_ring *tx_ring;
+ union e1000_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct igb_ring *rx_ring;
+ union e1000_adv_rx_desc *rx_desc;
+ u32 staterr;
+ u16 i, n;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ pr_info("Device Name state trans_start last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ pr_info(" Register Name Value\n");
+ for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ igb_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ struct igb_tx_buffer *buffer_info;
+ tx_ring = adapter->tx_ring[n];
+ buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+ pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 38 36 35 32 31 24 15 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
+ struct igb_tx_buffer *buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ next_desc = " NTC/U";
+ else if (i == tx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == tx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
+ i, le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp,
+ buffer_info->skb, next_desc);
+
+ if (netif_msg_pktdata(adapter) && buffer_info->skb)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1, buffer_info->skb->data,
+ dma_unmap_len(buffer_info, len),
+ true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info(" %5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 17 16 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
+ struct igb_rx_buffer *buffer_info;
+ buffer_info = &rx_ring->rx_buffer_info[i];
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ if (staterr & E1000_RXD_STAT_DD) {
+ /* Descriptor Done */
+ pr_info("%s[0x%03X] %016llX %016llX ---------------- %s\n",
+ "RWB", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ next_desc);
+ } else {
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %s\n",
+ "R ", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)buffer_info->dma,
+ next_desc);
+
+ if (netif_msg_pktdata(adapter) &&
+ buffer_info->dma && buffer_info->page) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ page_address(buffer_info->page) +
+ buffer_info->page_offset,
+ IGB_RX_BUFSZ, true);
+ }
+ }
+ }
+ }
+
+exit:
+ return;
+}
+
+/**
+ * igb_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ **/
+static int igb_get_i2c_data(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_DATA_IN);
+}
+
+/**
+ * igb_set_i2c_data - Sets the I2C data bit
+ * @data: pointer to hardware structure
+ * @state: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ **/
+static void igb_set_i2c_data(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state)
+ i2cctl |= E1000_I2C_DATA_OUT;
+ else
+ i2cctl &= ~E1000_I2C_DATA_OUT;
+
+ i2cctl &= ~E1000_I2C_DATA_OE_N;
+ i2cctl |= E1000_I2C_CLK_OE_N;
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+
+}
+
+/**
+ * igb_set_i2c_clk - Sets the I2C SCL clock
+ * @data: pointer to hardware structure
+ * @state: state to set clock
+ *
+ * Sets the I2C clock line to state
+ **/
+static void igb_set_i2c_clk(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state) {
+ i2cctl |= E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ } else {
+ i2cctl &= ~E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ }
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+}
+
+/**
+ * igb_get_i2c_clk - Gets the I2C SCL clock state
+ * @data: pointer to hardware structure
+ *
+ * Gets the I2C clock state
+ **/
+static int igb_get_i2c_clk(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_CLK_IN);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+ .setsda = igb_set_i2c_data,
+ .setscl = igb_set_i2c_clk,
+ .getsda = igb_get_i2c_data,
+ .getscl = igb_get_i2c_clk,
+ .udelay = 5,
+ .timeout = 20,
+};
+
+/**
+ * igb_get_hw_dev - return device
+ * @hw: pointer to hardware structure
+ *
+ * used by hardware layer to print debugging information
+ **/
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
+{
+ struct igb_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+ int ret;
+
+ pr_info("%s - version %s\n",
+ igb_driver_string, igb_driver_version);
+ pr_info("%s\n", igb_copyright);
+
+#ifdef CONFIG_IGB_DCA
+ dca_register_notify(&dca_notifier);
+#endif
+ ret = pci_register_driver(&igb_driver);
+ return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+#ifdef CONFIG_IGB_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
+ pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
+/**
+ * igb_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void igb_cache_ring_register(struct igb_adapter *adapter)
+{
+ int i = 0, j = 0;
+ u32 rbase_offset = adapter->vfs_allocated_count;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* The queues are allocated for virtualization such that VF 0
+ * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
+ * In order to avoid collision we start at the first free queue
+ * and continue consuming queues in the same sequence
+ */
+ if (adapter->vfs_allocated_count) {
+ for (; i < adapter->rss_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset +
+ Q_IDX_82576(i);
+ }
+ /* Fall through */
+ case e1000_82575:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Fall through */
+ default:
+ for (; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset + i;
+ for (; j < adapter->num_tx_queues; j++)
+ adapter->tx_ring[j]->reg_idx = rbase_offset + j;
+ break;
+ }
+}
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg)
+{
+ struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
+ u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
+ u32 value = 0;
+
+ if (E1000_REMOVED(hw_addr))
+ return ~value;
+
+ value = readl(&hw_addr[reg]);
+
+ /* reads should not return all F's */
+ if (!(~value) && (!reg || !(~readl(hw_addr)))) {
+ struct net_device *netdev = igb->netdev;
+ hw->hw_addr = NULL;
+ netif_device_detach(netdev);
+ netdev_err(netdev, "PCIe link lost, device now detached\n");
+ }
+
+ return value;
+}
+
+/**
+ * igb_write_ivar - configure ivar for given MSI-X vector
+ * @hw: pointer to the HW structure
+ * @msix_vector: vector number we are allocating to a given ring
+ * @index: row index of IVAR register to write within IVAR table
+ * @offset: column offset of in IVAR, should be multiple of 8
+ *
+ * This function is intended to handle the writing of the IVAR register
+ * for adapters 82576 and newer. The IVAR table consists of 2 columns,
+ * each containing an cause allocation for an Rx and Tx ring, and a
+ * variable number of rows depending on the number of queues supported.
+ **/
+static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
+ int index, int offset)
+{
+ u32 ivar = array_rd32(E1000_IVAR0, index);
+
+ /* clear any bits that are currently set */
+ ivar &= ~((u32)0xFF << offset);
+
+ /* write vector and valid bit */
+ ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
+
+ array_wr32(E1000_IVAR0, index, ivar);
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int rx_queue = IGB_N0_QUEUE;
+ int tx_queue = IGB_N0_QUEUE;
+ u32 msixbm = 0;
+
+ if (q_vector->rx.ring)
+ rx_queue = q_vector->rx.ring->reg_idx;
+ if (q_vector->tx.ring)
+ tx_queue = q_vector->tx.ring->reg_idx;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ /* The 82575 assigns vectors using a bitmask, which matches the
+ * bitmask for the EICR/EIMS/EIMC registers. To assign one
+ * or more queues to a vector, we write the appropriate bits
+ * into the MSIXBM register for that vector.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+ if (tx_queue > IGB_N0_QUEUE)
+ msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) && msix_vector == 0)
+ msixbm |= E1000_EIMS_OTHER;
+ array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+ q_vector->eims_value = msixbm;
+ break;
+ case e1000_82576:
+ /* 82576 uses a table that essentially consists of 2 columns
+ * with 8 rows. The ordering is column-major so we use the
+ * lower 3 bits as the row index, and the 4th bit as the
+ * column offset.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue & 0x7,
+ (rx_queue & 0x8) << 1);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue & 0x7,
+ ((tx_queue & 0x8) << 1) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* On 82580 and newer adapters the scheme is similar to 82576
+ * however instead of ordering column-major we have things
+ * ordered row-major. So we traverse the table by using
+ * bit 0 as the column offset, and the remaining bits as the
+ * row index.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue >> 1,
+ (rx_queue & 0x1) << 4);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue >> 1,
+ ((tx_queue & 0x1) << 4) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ /* add q_vector eims value to global eims_enable_mask */
+ adapter->eims_enable_mask |= q_vector->eims_value;
+
+ /* configure q_vector to set itr on first interrupt */
+ q_vector->set_itr = 1;
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure to initialize
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+ u32 tmp;
+ int i, vector = 0;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->eims_enable_mask = 0;
+
+ /* set vector for other causes, i.e. link changes */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ tmp = rd32(E1000_CTRL_EXT);
+ /* enable MSI-X PBA support*/
+ tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask interrupts upon ICR read. */
+ tmp |= E1000_CTRL_EXT_EIAME;
+ tmp |= E1000_CTRL_EXT_IRCA;
+
+ wr32(E1000_CTRL_EXT, tmp);
+
+ /* enable msix_other interrupt */
+ array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER);
+ adapter->eims_other = E1000_EIMS_OTHER;
+
+ break;
+
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Turn on MSI-X capability first, or our settings
+ * won't stick. And it will take days to debug.
+ */
+ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+ E1000_GPIE_PBA | E1000_GPIE_EIAME |
+ E1000_GPIE_NSICR);
+
+ /* enable msix_other interrupt */
+ adapter->eims_other = 1 << vector;
+ tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+ wr32(E1000_IVAR_MISC, tmp);
+ break;
+ default:
+ /* do nothing, since nothing else supports MSI-X */
+ break;
+ } /* switch (hw->mac.type) */
+
+ adapter->eims_enable_mask |= adapter->eims_other;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ igb_assign_vector(adapter->q_vector[i], vector++);
+
+ wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ * @adapter: board private structure to initialize
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int i, err = 0, vector = 0, free_vector = 0;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_other, 0, netdev->name, adapter);
+ if (err)
+ goto err_out;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+ vector++;
+
+ q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+ if (q_vector->rx.ring && q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else if (q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+ q_vector->tx.ring->queue_index);
+ else if (q_vector->rx.ring)
+ sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else
+ sprintf(q_vector->name, "%s-unused", netdev->name);
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_ring, 0, q_vector->name,
+ q_vector);
+ if (err)
+ goto err_free;
+ }
+
+ igb_configure_msix(adapter);
+ return 0;
+
+err_free:
+ /* free already assigned IRQs */
+ free_irq(adapter->msix_entries[free_vector++].vector, adapter);
+
+ vector--;
+ for (i = 0; i < vector; i++) {
+ free_irq(adapter->msix_entries[free_vector++].vector,
+ adapter->q_vector[i]);
+ }
+err_out:
+ return err;
+}
+
+/**
+ * igb_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.
+ **/
+static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ adapter->q_vector[v_idx] = NULL;
+
+ /* igb_get_stats64() might access the rings on this vector,
+ * we must wait a grace period before freeing it.
+ */
+ if (q_vector)
+ kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * igb_reset_q_vector - Reset config for interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be reset
+ *
+ * If NAPI is enabled it will delete any references to the
+ * NAPI struct. This is preparation for igb_free_q_vector.
+ **/
+static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ /* Coming from igb_set_interrupt_capability, the vectors are not yet
+ * allocated. So, q_vector is NULL so we should stop here.
+ */
+ if (!q_vector)
+ return;
+
+ if (q_vector->tx.ring)
+ adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
+
+ if (q_vector->rx.ring)
+ adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL;
+
+ netif_napi_del(&q_vector->napi);
+
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ pci_disable_msix(adapter->pdev);
+ else if (adapter->flags & IGB_FLAG_HAS_MSI)
+ pci_disable_msi(adapter->pdev);
+
+ while (v_idx--)
+ igb_reset_q_vector(adapter, v_idx);
+}
+
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--) {
+ igb_reset_q_vector(adapter, v_idx);
+ igb_free_q_vector(adapter, v_idx);
+ }
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ * @adapter: board private structure to initialize
+ *
+ * This function resets the device so that it has 0 Rx queues, Tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+ igb_free_q_vectors(adapter);
+ igb_reset_interrupt_capability(adapter);
+}
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
+{
+ int err;
+ int numvecs, i;
+
+ if (!msix)
+ goto msi_only;
+ adapter->flags |= IGB_FLAG_HAS_MSIX;
+
+ /* Number of supported queues. */
+ adapter->num_rx_queues = adapter->rss_queues;
+ if (adapter->vfs_allocated_count)
+ adapter->num_tx_queues = 1;
+ else
+ adapter->num_tx_queues = adapter->rss_queues;
+
+ /* start with one vector for every Rx queue */
+ numvecs = adapter->num_rx_queues;
+
+ /* if Tx handler is separate add 1 for every Tx queue */
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
+
+ /* store the number of vectors reserved for queues */
+ adapter->num_q_vectors = numvecs;
+
+ /* add 1 vector for link status interrupts */
+ numvecs++;
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix_range(adapter->pdev,
+ adapter->msix_entries,
+ numvecs,
+ numvecs);
+ if (err > 0)
+ return;
+
+ igb_reset_interrupt_capability(adapter);
+
+ /* If we can't do MSI-X, try MSI */
+msi_only:
+ adapter->flags &= ~IGB_FLAG_HAS_MSIX;
+#ifdef CONFIG_PCI_IOV
+ /* disable SR-IOV for non MSI-X configurations */
+ if (adapter->vf_data) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+ }
+#endif
+ adapter->vfs_allocated_count = 0;
+ adapter->rss_queues = 1;
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_q_vectors = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGB_FLAG_HAS_MSI;
+}
+
+static void igb_add_ring(struct igb_ring *ring,
+ struct igb_ring_container *head)
+{
+ head->ring = ring;
+ head->count++;
+}
+
+/**
+ * igb_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector. If allocation fails we return -ENOMEM.
+ **/
+static int igb_alloc_q_vector(struct igb_adapter *adapter,
+ int v_count, int v_idx,
+ int txr_count, int txr_idx,
+ int rxr_count, int rxr_idx)
+{
+ struct igb_q_vector *q_vector;
+ struct igb_ring *ring;
+ int ring_count, size;
+
+ /* igb only supports 1 Tx and/or 1 Rx queue per vector */
+ if (txr_count > 1 || rxr_count > 1)
+ return -ENOMEM;
+
+ ring_count = txr_count + rxr_count;
+ size = sizeof(struct igb_q_vector) +
+ (sizeof(struct igb_ring) * ring_count);
+
+ /* allocate q_vector and rings */
+ q_vector = adapter->q_vector[v_idx];
+ if (!q_vector)
+ q_vector = kzalloc(size, GFP_KERNEL);
+ if (!q_vector)
+ return -ENOMEM;
+
+ /* initialize NAPI */
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ igb_poll, 64);
+
+ /* tie q_vector and adapter together */
+ adapter->q_vector[v_idx] = q_vector;
+ q_vector->adapter = adapter;
+
+ /* initialize work limits */
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+
+ /* initialize ITR configuration */
+ q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
+ q_vector->itr_val = IGB_START_ITR;
+
+ /* initialize pointer to rings */
+ ring = q_vector->ring;
+
+ /* intialize ITR */
+ if (rxr_count) {
+ /* rx or rx/tx vector */
+ if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ } else {
+ /* tx only vector */
+ if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
+ q_vector->itr_val = adapter->tx_itr_setting;
+ }
+
+ if (txr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Tx values */
+ igb_add_ring(ring, &q_vector->tx);
+
+ /* For 82575, context index must be unique per ring. */
+ if (adapter->hw.mac.type == e1000_82575)
+ set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
+
+ /* apply Tx specific ring traits */
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = txr_idx;
+
+ u64_stats_init(&ring->tx_syncp);
+ u64_stats_init(&ring->tx_syncp2);
+
+ /* assign ring to adapter */
+ adapter->tx_ring[txr_idx] = ring;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ if (rxr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Rx values */
+ igb_add_ring(ring, &q_vector->rx);
+
+ /* set flag indicating ring supports SCTP checksum offload */
+ if (adapter->hw.mac.type >= e1000_82576)
+ set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
+
+ /* On i350, i354, i210, and i211, loopback VLAN packets
+ * have the tag byte-swapped.
+ */
+ if (adapter->hw.mac.type >= e1000_i350)
+ set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
+
+ /* apply Rx specific ring traits */
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rxr_idx;
+
+ u64_stats_init(&ring->rx_syncp);
+
+ /* assign ring to adapter */
+ adapter->rx_ring[rxr_idx] = ring;
+ }
+
+ return 0;
+}
+
+
+/**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+ int q_vectors = adapter->num_q_vectors;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+ int err;
+
+ if (q_vectors >= (rxr_remaining + txr_remaining)) {
+ for (; rxr_remaining; v_idx++) {
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ 0, 0, 1, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining--;
+ rxr_idx++;
+ }
+ }
+
+ for (; v_idx < q_vectors; v_idx++) {
+ int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+ int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ tqpv, txr_idx, rqpv, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining -= rqpv;
+ txr_remaining -= tqpv;
+ rxr_idx++;
+ txr_idx++;
+ }
+
+ return 0;
+
+err_out:
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ igb_free_q_vector(adapter, v_idx);
+
+ return -ENOMEM;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ igb_set_interrupt_capability(adapter, msix);
+
+ err = igb_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ igb_cache_ring_register(adapter);
+
+ return 0;
+
+err_alloc_q_vectors:
+ igb_reset_interrupt_capability(adapter);
+ return err;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ * @adapter: board private structure to initialize
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ err = igb_request_msix(adapter);
+ if (!err)
+ goto request_done;
+ /* fall back to MSI */
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+ err = igb_init_interrupt_scheme(adapter, false);
+ if (err)
+ goto request_done;
+
+ igb_setup_all_tx_resources(adapter);
+ igb_setup_all_rx_resources(adapter);
+ igb_configure(adapter);
+ }
+
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ err = request_irq(pdev->irq, igb_intr_msi, 0,
+ netdev->name, adapter);
+ if (!err)
+ goto request_done;
+
+ /* fall back to legacy interrupts */
+ igb_reset_interrupt_capability(adapter);
+ adapter->flags &= ~IGB_FLAG_HAS_MSI;
+ }
+
+ err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
+ netdev->name, adapter);
+
+ if (err)
+ dev_err(&pdev->dev, "Error %d getting interrupt\n",
+ err);
+
+request_done:
+ return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int vector = 0, i;
+
+ free_irq(adapter->msix_entries[vector++].vector, adapter);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ free_irq(adapter->msix_entries[vector++].vector,
+ adapter->q_vector[i]);
+ } else {
+ free_irq(adapter->pdev->irq, adapter);
+ }
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* we need to be careful when disabling interrupts. The VFs are also
+ * mapped into these registers and so clearing the bits can cause
+ * issues on the VF drivers so we only need to clear what we set
+ */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 regval = rd32(E1000_EIAM);
+
+ wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+ wr32(E1000_EIMC, adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
+ }
+
+ wr32(E1000_IAM, 0);
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
+ u32 regval = rd32(E1000_EIAC);
+
+ wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
+ wr32(E1000_EIMS, adapter->eims_enable_mask);
+ if (adapter->vfs_allocated_count) {
+ wr32(E1000_MBVFIMR, 0xFF);
+ ims |= E1000_IMS_VMMB;
+ }
+ wr32(E1000_IMS, ims);
+ } else {
+ wr32(E1000_IMS, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ wr32(E1000_IAM, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ }
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !test_bit(old_vid, adapter->active_vlans)) {
+ /* remove VID from filter table */
+ igb_vfta_set(hw, old_vid, false);
+ }
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ igb_get_hw_control(adapter);
+ igb_set_rx_mode(netdev);
+
+ igb_restore_vlan(adapter);
+
+ igb_setup_tctl(adapter);
+ igb_setup_mrqc(adapter);
+ igb_setup_rctl(adapter);
+
+ igb_configure_tx(adapter);
+ igb_configure_rx(adapter);
+
+ igb_rx_fifo_flush_82575(&adapter->hw);
+
+ /* call igb_desc_unused which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
+ }
+}
+
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+ igb_reset_phy(&adapter->hw);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_up_phy_copper(&adapter->hw);
+ else
+ igb_power_up_serdes_link_82575(&adapter->hw);
+
+ igb_setup_link(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_down_phy_copper_82575(&adapter->hw);
+ else
+ igb_shutdown_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * Detect and switch function for Media Auto Sense
+ * @adapter: address of the board private structure
+ **/
+static void igb_check_swap_media(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext, connsw;
+ bool swap_now = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ connsw = rd32(E1000_CONNSW);
+
+ /* need to live swap if current media is copper and we have fiber/serdes
+ * to go to.
+ */
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
+ swap_now = true;
+ } else if (!(connsw & E1000_CONNSW_SERDESD)) {
+ /* copper signal takes time to appear */
+ if (adapter->copper_tries < 4) {
+ adapter->copper_tries++;
+ connsw |= E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ return;
+ } else {
+ adapter->copper_tries = 0;
+ if ((connsw & E1000_CONNSW_PHYSD) &&
+ (!(connsw & E1000_CONNSW_PHY_PDN))) {
+ swap_now = true;
+ connsw &= ~E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ }
+ }
+ }
+
+ if (!swap_now)
+ return;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to fiber/serdes\n");
+ ctrl_ext |=
+ E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ adapter->copper_tries = 0;
+ break;
+ case e1000_media_type_internal_serdes:
+ case e1000_media_type_fiber:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to copper\n");
+ ctrl_ext &=
+ ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ break;
+ default:
+ /* shouldn't get here during regular operation */
+ netdev_err(adapter->netdev,
+ "AMS: Invalid media type found, returning\n");
+ break;
+ }
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+int igb_up(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+ igb_configure(adapter);
+
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ igb_configure_msix(adapter);
+ else
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(adapter->netdev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (!hw->dev_spec._82575.eee_disable))
+ adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
+ return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, rctl;
+ int i;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_tx_stop_all_queues(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ wr32(E1000_TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ wrfl();
+ usleep_range(10000, 11000);
+
+ igb_irq_disable(adapter);
+
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ if (adapter->q_vector[i]) {
+ napi_synchronize(&adapter->q_vector[i]->napi);
+ napi_disable(&adapter->q_vector[i]->napi);
+ }
+ }
+
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netif_carrier_off(netdev);
+
+ /* record the stats before reset*/
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ if (!pci_channel_offline(adapter->pdev))
+ igb_reset(adapter);
+ igb_clean_all_tx_rings(adapter);
+ igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+ /* since we reset the hardware DCA settings were cleared */
+ igb_setup_dca(adapter);
+#endif
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ igb_down(adapter);
+ igb_up(adapter);
+ clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+/** igb_enable_mas - Media Autosense re-enable after swap
+ *
+ * @adapter: adapter struct
+ **/
+static s32 igb_enable_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 connsw;
+ s32 ret_val = 0;
+
+ connsw = rd32(E1000_CONNSW);
+ if (!(hw->phy.media_type == e1000_media_type_copper))
+ return ret_val;
+
+ /* configure for SerDes media detect */
+ if (!(connsw & E1000_CONNSW_SERDESD)) {
+ connsw |= E1000_CONNSW_ENRGSRC;
+ connsw |= E1000_CONNSW_AUTOSENSE_EN;
+ wr32(E1000_CONNSW, connsw);
+ wrfl();
+ } else if (connsw & E1000_CONNSW_SERDESD) {
+ /* already SerDes, no need to enable anything */
+ return ret_val;
+ } else {
+ netdev_info(adapter->netdev,
+ "MAS: Unable to configure feature, disabling..\n");
+ adapter->flags &= ~IGB_FLAG_MAS_ENABLE;
+ }
+ return ret_val;
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_fc_info *fc = &hw->fc;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_82580:
+ pba = rd32(E1000_RXPBS);
+ pba = igb_rxpbs_adjust_82580(pba);
+ break;
+ case e1000_82576:
+ pba = rd32(E1000_RXPBS);
+ pba &= E1000_RXPBS_SIZE_MASK_82576;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ default:
+ pba = E1000_PBA_34K;
+ break;
+ }
+
+ if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ (mac->type < e1000_82576)) {
+ /* adjust PBA for jumbo frames */
+ wr32(E1000_PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB.
+ */
+ pba = rd32(E1000_PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* the Tx fifo also stores 16 bytes of information about the Tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(union e1000_adv_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation
+ */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* if short on Rx space, Rx wins and must trump Tx
+ * adjustment
+ */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ wr32(E1000_PBA, pba);
+ }
+
+ /* flow control settings */
+ /* The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - 2 * adapter->max_frame_size));
+
+ fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
+ fc->pause_time = 0xFFFF;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ /* disable receive for all VFs and wait one second */
+ if (adapter->vfs_allocated_count) {
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++)
+ adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
+
+ /* ping all the active vfs to let them know we are going down */
+ igb_ping_all_vfs(adapter);
+
+ /* disable transmits and receives */
+ wr32(E1000_VFRE, 0);
+ wr32(E1000_VFTE, 0);
+ }
+
+ /* Allow time for pending master requests to run */
+ hw->mac.ops.reset_hw(hw);
+ wr32(E1000_WUC, 0);
+
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ /* need to resetup here after media swap */
+ adapter->ei.get_invariants(hw);
+ adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
+ }
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (igb_enable_mas(adapter))
+ dev_err(&pdev->dev,
+ "Error enabling Media Auto Sense\n");
+ }
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&pdev->dev, "Hardware Error\n");
+
+ /* Flow control settings reset on hardware reset, so guarantee flow
+ * control is off when forcing speed.
+ */
+ if (!hw->mac.autoneg)
+ igb_force_mac_fc(hw);
+
+ igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+ /* Re-initialize the thermal sensor on i350 devices. */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (mac->type == e1000_i350 && hw->bus.func == 0) {
+ /* If present, re-initialize the external thermal sensor
+ * interface.
+ */
+ if (adapter->ets)
+ mac->ops.init_thermal_sensor_thresh(hw);
+ }
+ }
+#endif
+ /* Re-establish EEE setting */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ igb_set_eee_i350(hw, true, true);
+ break;
+ case e1000_i354:
+ igb_set_eee_i354(hw, true, true);
+ break;
+ default:
+ break;
+ }
+ }
+ if (!netif_running(adapter->netdev))
+ igb_power_down_link(adapter);
+
+ igb_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ /* Re-enable PTP, where applicable. */
+ igb_ptp_reset(adapter);
+
+ igb_get_phy_info(hw);
+}
+
+static netdev_features_t igb_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ /* Since there is no support for separate Rx/Tx vlan accel
+ * enable/disable make sure Tx flag is always in same state as Rx.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
+ return features;
+}
+
+static int igb_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ netdev_features_t changed = netdev->features ^ features;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+ igb_vlan_mode(netdev, features);
+
+ if (!(changed & NETIF_F_RXALL))
+ return 0;
+
+ netdev->features = features;
+
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ else
+ igb_reset(adapter);
+
+ return 0;
+}
+
+static const struct net_device_ops igb_netdev_ops = {
+ .ndo_open = igb_open,
+ .ndo_stop = igb_close,
+ .ndo_start_xmit = igb_xmit_frame,
+ .ndo_get_stats64 = igb_get_stats64,
+ .ndo_set_rx_mode = igb_set_rx_mode,
+ .ndo_set_mac_address = igb_set_mac,
+ .ndo_change_mtu = igb_change_mtu,
+ .ndo_do_ioctl = igb_ioctl,
+ .ndo_tx_timeout = igb_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
+ .ndo_set_vf_mac = igb_ndo_set_vf_mac,
+ .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
+ .ndo_set_vf_rate = igb_ndo_set_vf_bw,
+ .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk,
+ .ndo_get_vf_config = igb_ndo_get_vf_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igb_netpoll,
+#endif
+ .ndo_fix_features = igb_fix_features,
+ .ndo_set_features = igb_set_features,
+};
+
+/**
+ * igb_set_fw_version - Configure version string for ethtool
+ * @adapter: adapter struct
+ **/
+void igb_set_fw_version(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_fw_version fw;
+
+ igb_get_fw_version(hw, &fw);
+
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (!(igb_get_flash_presence_i210(hw))) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%2d.%2d-%d",
+ fw.invm_major, fw.invm_minor,
+ fw.invm_img_type);
+ break;
+ }
+ /* fall through */
+ default:
+ /* if option is rom valid, display its version too */
+ if (fw.or_valid) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x, %d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.etrack_id,
+ fw.or_major, fw.or_build, fw.or_patch);
+ /* no option rom */
+ } else if (fw.etrack_id != 0X0000) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x",
+ fw.eep_major, fw.eep_minor, fw.etrack_id);
+ } else {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.eep_build);
+ }
+ break;
+ }
+}
+
+/**
+ * igb_init_mas - init Media Autosense feature if enabled in the NVM
+ *
+ * @adapter: adapter struct
+ **/
+static void igb_init_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 eeprom_data;
+
+ hw->nvm.ops.read(hw, NVM_COMPAT, 1, &eeprom_data);
+ switch (hw->bus.func) {
+ case E1000_FUNC_0:
+ if (eeprom_data & IGB_MAS_ENABLE_0) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_1:
+ if (eeprom_data & IGB_MAS_ENABLE_1) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_2:
+ if (eeprom_data & IGB_MAS_ENABLE_2) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_3:
+ if (eeprom_data & IGB_MAS_ENABLE_3) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ default:
+ /* Shouldn't get here */
+ netdev_err(adapter->netdev,
+ "MAS: Invalid port configuration, returning\n");
+ break;
+ }
+}
+
+/**
+ * igb_init_i2c - Init I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+ s32 status = 0;
+
+ /* I2C interface supported on i350 devices */
+ if (adapter->hw.mac.type != e1000_i350)
+ return 0;
+
+ /* Initialize the i2c bus which is controlled by the registers.
+ * This bus will use the i2c_algo_bit structue that implements
+ * the protocol through toggling of the 4 bits in the register.
+ */
+ adapter->i2c_adap.owner = THIS_MODULE;
+ adapter->i2c_algo = igb_i2c_algo;
+ adapter->i2c_algo.data = adapter;
+ adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+ adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+ strlcpy(adapter->i2c_adap.name, "igb BB",
+ sizeof(adapter->i2c_adap.name));
+ status = i2c_bit_add_bus(&adapter->i2c_adap);
+ return status;
+}
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igb_adapter *adapter;
+ struct e1000_hw *hw;
+ u16 eeprom_data = 0;
+ s32 ret_val;
+ static int global_quad_port_a; /* global quad port a indication */
+ const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+ int err, pci_using_dac;
+ u8 part_str[E1000_PBANUM_LENGTH];
+
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+
+ err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM),
+ igb_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
+ IGB_MAX_TX_QUEUES);
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ err = -EIO;
+ hw->hw_addr = pci_iomap(pdev, 0, 0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ netdev->netdev_ops = &igb_netdev_ops;
+ igb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = pci_resource_start(pdev, 0);
+ netdev->mem_end = pci_resource_end(pdev, 0);
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* Copy the default MAC, PHY and NVM function pointers */
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ /* Initialize skew-specific constants */
+ err = ei->get_invariants(hw);
+ if (err)
+ goto err_sw_init;
+
+ /* setup the private structure */
+ err = igb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ igb_get_bus_info_pcie(hw);
+
+ hw->phy.autoneg_wait_to_complete = false;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = AUTO_ALL_MODES;
+ hw->phy.disable_polarity_correction = false;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (igb_check_reset_block(hw))
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
+
+ /* features is initialized to 0 in allocation, it might have bits
+ * set by igb_sw_init so we should use an or instead of an
+ * assignment.
+ */
+ netdev->features |= NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_TX;
+
+ /* copy netdev features into list of user selectable features */
+ netdev->hw_features |= netdev->features;
+ netdev->hw_features |= NETIF_F_RXALL;
+
+ /* set this bit last since it cannot be part of hw_features */
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ netdev->vlan_features |= NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_SG;
+
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (hw->mac.type >= e1000_82576) {
+ netdev->hw_features |= NETIF_F_SCTP_CSUM;
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ }
+
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
+
+ /* before reading the NVM, reset the controller to put the device in a
+ * known good starting state
+ */
+ hw->mac.ops.reset_hw(hw);
+
+ /* make sure the NVM is good , i211/i210 parts can have special NVM
+ * that doesn't contain a checksum
+ */
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (igb_get_flash_presence_i210(hw)) {
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev,
+ "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ }
+ break;
+ default:
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ break;
+ }
+
+ /* copy the MAC address out of the NVM */
+ if (hw->mac.ops.read_mac_addr(hw))
+ dev_err(&pdev->dev, "NVM Read Error\n");
+
+ memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* get firmware version for ethtool -i */
+ igb_set_fw_version(adapter);
+
+ /* configure RXPBSIZE and TXPBSIZE */
+ if (hw->mac.type == e1000_i210) {
+ wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
+ wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
+ }
+
+ setup_timer(&adapter->watchdog_timer, igb_watchdog,
+ (unsigned long) adapter);
+ setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igb_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+ /* Initialize link properties that are user-changeable */
+ adapter->fc_autoneg = true;
+ hw->mac.autoneg = true;
+ hw->phy.autoneg_advertised = 0x2f;
+
+ hw->fc.requested_mode = e1000_fc_default;
+ hw->fc.current_mode = e1000_fc_default;
+
+ igb_validate_mdi_setting(hw);
+
+ /* By default, support wake on port A */
+ if (hw->bus.func == 0)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* Check the NVM for wake support on non-port A ports */
+ if (hw->mac.type >= e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
+ else if (hw->bus.func == 1)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+ if (eeprom_data & IGB_EEPROM_APME)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* now that we have the eeprom settings, apply the special cases where
+ * the eeprom may be wrong or the board simply won't support wake on
+ * lan on a particular port
+ */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting
+ */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ else
+ adapter->flags |= IGB_FLAG_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ /* If the device can't wake, don't set software support */
+ if (!device_can_wakeup(&adapter->pdev->dev))
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ if (adapter->flags & IGB_FLAG_WOL_SUPPORTED)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ /* Some vendors want WoL disabled by default, but still supported */
+ if ((hw->mac.type == e1000_i350) &&
+ (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+ adapter->wol = 0;
+ }
+
+ device_set_wakeup_enable(&adapter->pdev->dev,
+ adapter->flags & IGB_FLAG_WOL_SUPPORTED);
+
+ /* reset the hardware with the new settings */
+ igb_reset(adapter);
+
+ /* Init the I2C interface */
+ err = igb_init_i2c(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "failed to init i2c interface\n");
+ goto err_eeprom;
+ }
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+#ifdef CONFIG_IGB_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ }
+
+#endif
+#ifdef CONFIG_IGB_HWMON
+ /* Initialize the thermal sensor on i350 devices. */
+ if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+ u16 ets_word;
+
+ /* Read the NVM to determine if this i350 device supports an
+ * external thermal sensor.
+ */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+ if (ets_word != 0x0000 && ets_word != 0xFFFF)
+ adapter->ets = true;
+ else
+ adapter->ets = false;
+ if (igb_sysfs_init(adapter))
+ dev_err(&pdev->dev,
+ "failed to allocate sysfs resources\n");
+ } else {
+ adapter->ets = false;
+ }
+#endif
+ /* Check if Media Autosense is enabled */
+ adapter->ei = *ei;
+ if (hw->dev_spec._82575.mas_capable)
+ igb_init_mas(adapter);
+
+ /* do hw tstamp init after resetting */
+ igb_ptp_init(adapter);
+
+ dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+ /* print bus type/speed/width info, not applicable to i354 */
+ if (hw->mac.type != e1000_i354) {
+ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+ netdev->name,
+ ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+ "unknown"),
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ?
+ "Width x4" :
+ (hw->bus.width == e1000_bus_width_pcie_x2) ?
+ "Width x2" :
+ (hw->bus.width == e1000_bus_width_pcie_x1) ?
+ "Width x1" : "unknown"), netdev->dev_addr);
+ }
+
+ if ((hw->mac.type >= e1000_i210 ||
+ igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_read_part_string(hw, part_str,
+ E1000_PBANUM_LENGTH);
+ } else {
+ ret_val = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ }
+
+ if (ret_val)
+ strcpy(part_str, "Unknown");
+ dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
+ dev_info(&pdev->dev,
+ "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+ (adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
+ (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (hw->mac.type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ /* Enable EEE for internal copper PHY devices */
+ err = igb_set_eee_i350(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ break;
+ case e1000_i354:
+ if ((rd32(E1000_CTRL_EXT) &
+ E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+ err = igb_set_eee_i354(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ pm_runtime_put_noidle(&pdev->dev);
+ return 0;
+
+err_register:
+ igb_release_hw_control(adapter);
+ memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
+err_eeprom:
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_sw_init:
+ igb_clear_interrupt_scheme(adapter);
+ pci_iounmap(pdev, hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_disable_sriov(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* reclaim resources allocated to VFs */
+ if (adapter->vf_data) {
+ /* disable iov and allow time for transactions to clear */
+ if (pci_vfs_assigned(pdev)) {
+ dev_warn(&pdev->dev,
+ "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
+ return -EPERM;
+ } else {
+ pci_disable_sriov(pdev);
+ msleep(500);
+ }
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&pdev->dev, "IOV Disabled\n");
+
+ /* Re-enable DMA Coalescing flag since IOV is turned off */
+ adapter->flags |= IGB_FLAG_DMAC;
+ }
+
+ return 0;
+}
+
+static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int old_vfs = pci_num_vf(pdev);
+ int err = 0;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) || num_vfs > 7) {
+ err = -EPERM;
+ goto out;
+ }
+ if (!num_vfs)
+ goto out;
+
+ if (old_vfs) {
+ dev_info(&pdev->dev, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
+ old_vfs, max_vfs);
+ adapter->vfs_allocated_count = old_vfs;
+ } else
+ adapter->vfs_allocated_count = num_vfs;
+
+ adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+ sizeof(struct vf_data_storage), GFP_KERNEL);
+
+ /* if allocation failed then we do not support SR-IOV */
+ if (!adapter->vf_data) {
+ adapter->vfs_allocated_count = 0;
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for VF Data Storage\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* only call pci_enable_sriov() if no VFs are allocated already */
+ if (!old_vfs) {
+ err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "%d VFs allocated\n",
+ adapter->vfs_allocated_count);
+ for (i = 0; i < adapter->vfs_allocated_count; i++)
+ igb_vf_configure(adapter, i);
+
+ /* DMA Coalescing is not supported in IOV mode. */
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ goto out;
+
+err_out:
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+out:
+ return err;
+}
+
+#endif
+/**
+ * igb_remove_i2c - Cleanup I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+ /* free the adapter bus structure */
+ i2c_del_adapter(&adapter->i2c_adap);
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void igb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+#endif
+ igb_remove_i2c(adapter);
+ igb_ptp_stop(adapter);
+ /* The watchdog timer may be rescheduled, so explicitly
+ * disable watchdog from being rescheduled.
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+#ifdef CONFIG_IGB_DCA
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ dev_info(&pdev->dev, "DCA disabled\n");
+ dca_remove_requester(&pdev->dev);
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+#endif
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PCI_IOV
+ igb_disable_sriov(pdev);
+#endif
+
+ pci_iounmap(pdev, hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ kfree(adapter->shadow_vfta);
+ free_netdev(netdev);
+
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs. The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void igb_probe_vfs(struct igb_adapter *adapter)
+{
+#ifdef CONFIG_PCI_IOV
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Virtualization features not supported on i210 family. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
+ return;
+
+ pci_sriov_set_totalvfs(pdev, 7);
+ igb_pci_enable_sriov(pdev, max_vfs);
+
+#endif /* CONFIG_PCI_IOV */
+}
+
+static void igb_init_queue_configuration(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 max_rss_queues;
+
+ /* Determine the maximum number of RSS queues supported. */
+ switch (hw->mac.type) {
+ case e1000_i211:
+ max_rss_queues = IGB_MAX_RX_QUEUES_I211;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ max_rss_queues = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ /* I350 cannot do RSS and SR-IOV at the same time */
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
+ case e1000_i354:
+ default:
+ max_rss_queues = IGB_MAX_RX_QUEUES;
+ break;
+ }
+
+ adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
+
+ /* Determine if we need to pair queues. */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i211:
+ /* Device supports enough interrupts without queue pairing. */
+ break;
+ case e1000_82576:
+ /* If VFs are going to be allocated with RSS queues then we
+ * should pair the queues in order to conserve interrupts due
+ * to limited supply.
+ */
+ if ((adapter->rss_queues > 1) &&
+ (adapter->vfs_allocated_count > 6))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ /* fall through */
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ default:
+ /* If rss_queues > half of max_rss_queues, pair the queues in
+ * order to conserve interrupts due to limited supply.
+ */
+ if (adapter->rss_queues > (max_rss_queues / 2))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ break;
+ }
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IGB_DEFAULT_TXD;
+ adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+ /* set default ITR values */
+ adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+ /* set default work limits */
+ adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (max_vfs > 7) {
+ dev_warn(&pdev->dev,
+ "Maximum of 7 VFs per PF, using max\n");
+ max_vfs = adapter->vfs_allocated_count = 7;
+ } else
+ adapter->vfs_allocated_count = max_vfs;
+ if (adapter->vfs_allocated_count)
+ dev_warn(&pdev->dev,
+ "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
+ break;
+ default:
+ break;
+ }
+#endif /* CONFIG_PCI_IOV */
+
+ igb_init_queue_configuration(adapter);
+
+ /* Setup and initialize a copy of the hw vlan table array */
+ adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
+ GFP_ATOMIC);
+
+ /* This call may decrease the number of queues */
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_probe_vfs(adapter);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igb_irq_disable(adapter);
+
+ if (hw->mac.type >= e1000_i350)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+
+ set_bit(__IGB_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int __igb_open(struct net_device *netdev, bool resuming)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+ int i;
+
+ /* disallow open during test */
+ if (test_bit(__IGB_TESTING, &adapter->state)) {
+ WARN_ON(resuming);
+ return -EBUSY;
+ }
+
+ if (!resuming)
+ pm_runtime_get_sync(&pdev->dev);
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = igb_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igb_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ igb_power_up_link(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ igb_configure(adapter);
+
+ err = igb_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* Notify the stack of the actual queue counts. */
+ err = netif_set_real_num_tx_queues(adapter->netdev,
+ adapter->num_tx_queues);
+ if (err)
+ goto err_set_queues;
+
+ err = netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+ if (err)
+ goto err_set_queues;
+
+ /* From here on the code is the same as igb_up() */
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(netdev);
+
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ return 0;
+
+err_set_queues:
+ igb_free_irq(adapter);
+err_req_irq:
+ igb_release_hw_control(adapter);
+ igb_power_down_link(adapter);
+ igb_free_all_rx_resources(adapter);
+err_setup_rx:
+ igb_free_all_tx_resources(adapter);
+err_setup_tx:
+ igb_reset(adapter);
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ return err;
+}
+
+static int igb_open(struct net_device *netdev)
+{
+ return __igb_open(netdev, false);
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the driver's control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int __igb_close(struct net_device *netdev, bool suspending)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+
+ if (!suspending)
+ pm_runtime_get_sync(&pdev->dev);
+
+ igb_down(adapter);
+ igb_free_irq(adapter);
+
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ if (!suspending)
+ pm_runtime_put_sync(&pdev->dev);
+ return 0;
+}
+
+static int igb_close(struct net_device *netdev)
+{
+ return __igb_close(netdev, false);
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+
+ tx_ring->tx_buffer_info = vzalloc(size);
+ if (!tx_ring->tx_buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+
+err:
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = igb_setup_tx_resources(adapter->tx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_tx_resources(adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl;
+
+ /* disable queue 0 which is enabled by default on 82575 and 82576 */
+ wr32(E1000_TXDCTL(0), 0);
+
+ /* Program the Transmit Control Register */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igb_config_collision_dist(hw);
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+
+ wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txdctl = 0;
+ u64 tdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+
+ /* disable the queue */
+ wr32(E1000_TXDCTL(reg_idx), 0);
+ wrfl();
+ mdelay(10);
+
+ wr32(E1000_TDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_tx_desc));
+ wr32(E1000_TDBAL(reg_idx),
+ tdba & 0x00000000ffffffffULL);
+ wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+ ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+ wr32(E1000_TDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ txdctl |= IGB_TX_PTHRESH;
+ txdctl |= IGB_TX_HTHRESH << 8;
+ txdctl |= IGB_TX_WTHRESH << 16;
+
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: Rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+
+ rx_ring->rx_buffer_info = vzalloc(size);
+ if (!rx_ring->rx_buffer_info)
+ goto err;
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+
+err:
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = igb_setup_rx_resources(adapter->rx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_rx_resources(adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc, rxcsum;
+ u32 j, num_rx_queues;
+ static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741,
+ 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE,
+ 0xA32DCB77, 0x0CF23080, 0x3BB7426A,
+ 0xFA01ACBE };
+
+ /* Fill out hash function seeds */
+ for (j = 0; j < 10; j++)
+ wr32(E1000_RSSRK(j), rsskey[j]);
+
+ num_rx_queues = adapter->rss_queues;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ num_rx_queues = 2;
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->rss_indir_tbl_init != num_rx_queues) {
+ for (j = 0; j < IGB_RETA_SIZE; j++)
+ adapter->rss_indir_tbl[j] =
+ (j * num_rx_queues) / IGB_RETA_SIZE;
+ adapter->rss_indir_tbl_init = num_rx_queues;
+ }
+ igb_write_rss_indir_tbl(adapter);
+
+ /* Disable raw packet checksumming so that RSS hash is placed in
+ * descriptor on writeback. No need to enable TCP/UDP/IP checksum
+ * offloads as they are enabled by default
+ */
+ rxcsum = rd32(E1000_RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+
+ if (adapter->hw.mac.type >= e1000_82576)
+ /* Enable Receive Checksum Offload for SCTP */
+ rxcsum |= E1000_RXCSUM_CRCOFL;
+
+ /* Don't need to set TUOFL or IPOFL, they default to 1 */
+ wr32(E1000_RXCSUM, rxcsum);
+
+ /* Generate RSS hash based on packet types, TCP/UDP
+ * port numbers and/or IPv4/v6 src and dst addresses
+ */
+ mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
+
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
+
+ /* If VMDq is enabled then we set the appropriate mode for that, else
+ * we default to RSS so that an RSS hash is calculated per packet even
+ * if we are only using one queue
+ */
+ if (adapter->vfs_allocated_count) {
+ if (hw->mac.type > e1000_82575) {
+ /* Set the default pool for the PF's first queue */
+ u32 vtctl = rd32(E1000_VT_CTL);
+
+ vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+ E1000_VT_CTL_DISABLE_DEF_POOL);
+ vtctl |= adapter->vfs_allocated_count <<
+ E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+ wr32(E1000_VT_CTL, vtctl);
+ }
+ if (adapter->rss_queues > 1)
+ mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+ else
+ mrqc |= E1000_MRQC_ENABLE_VMDQ;
+ } else {
+ if (hw->mac.type != e1000_i211)
+ mrqc |= E1000_MRQC_ENABLE_RSS_4Q;
+ }
+ igb_vmm_control(adapter);
+
+ wr32(E1000_MRQC, mrqc);
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_rctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = rd32(E1000_RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
+ (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /* enable stripping of CRC. It's unlikely this will break BMC
+ * redirection as it did with e1000. Newer features require
+ * that the HW strips the CRC.
+ */
+ rctl |= E1000_RCTL_SECRC;
+
+ /* disable store bad packets and clear size bits. */
+ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
+
+ /* enable LPE to prevent packets larger than max_frame_size */
+ rctl |= E1000_RCTL_LPE;
+
+ /* disable queue 0 to prevent tail write w/o re-config */
+ wr32(E1000_RXDCTL(0), 0);
+
+ /* Attention!!! For SR-IOV PF driver operations you must enable
+ * queue drop for all VF and PF queues to prevent head of line blocking
+ * if an un-trusted VF does not provide descriptors to hardware.
+ */
+ if (adapter->vfs_allocated_count) {
+ /* set all queue drop enable bits */
+ wr32(E1000_QDE, ALL_QUEUES);
+ }
+
+ /* This is useful for sniffing bad packets. */
+ if (adapter->netdev->features & NETIF_F_RXALL) {
+ /* UPE and MPE will be handled by normal PROMISC logic
+ * in e1000e_set_rx_mode
+ */
+ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
+ E1000_RCTL_BAM | /* RX All Bcast Pkts */
+ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+
+ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
+ E1000_RCTL_DPF | /* Allow filtered pause */
+ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+ /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+ * and that breaks VLANs.
+ */
+ }
+
+ wr32(E1000_RCTL, rctl);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* if it isn't the PF check to see if VFs are enabled and
+ * increase the size to support vlan tags
+ */
+ if (vfn < adapter->vfs_allocated_count &&
+ adapter->vf_data[vfn].vlans_enabled)
+ size += VLAN_TAG_SIZE;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+ u32 max_frame_size = adapter->max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+ u16 pf_id = adapter->vfs_allocated_count;
+
+ if (pf_id) {
+ igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+ /* If we're in VMDQ or SR-IOV mode, then set global RLPML
+ * to our max jumbo frame size, in case we need to enable
+ * jumbo frames on one of the rings later.
+ * This will not pass over-length frames into the default
+ * queue because it's gated by the VMOLR.RLPML.
+ */
+ max_frame_size = MAX_JUMBO_FRAME_SIZE;
+ }
+
+ wr32(E1000_RLPML, max_frame_size);
+}
+
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+ int vfn, bool aupe)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* This register exists only on 82576 and newer so if we are older then
+ * we should exit and do nothing
+ */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ if (hw->mac.type == e1000_i350) {
+ u32 dvmolr;
+
+ dvmolr = rd32(E1000_DVMOLR(vfn));
+ dvmolr |= E1000_DVMOLR_STRVLAN;
+ wr32(E1000_DVMOLR(vfn), dvmolr);
+ }
+ if (aupe)
+ vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
+ else
+ vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
+
+ /* clear all bits that might not be set */
+ vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+ if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+ /* for VMDq only allow the VFs and pool 0 to accept broadcast and
+ * multicast packets
+ */
+ if (vfn <= adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
+
+ wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+ u32 srrctl = 0, rxdctl = 0;
+
+ /* disable the queue */
+ wr32(E1000_RXDCTL(reg_idx), 0);
+
+ /* Set DMA base address registers */
+ wr32(E1000_RDBAL(reg_idx),
+ rdba & 0x00000000ffffffffULL);
+ wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+ wr32(E1000_RDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_rx_desc));
+
+ /* initialize head and tail */
+ ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+ wr32(E1000_RDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ /* set descriptor configuration */
+ srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ if (hw->mac.type >= e1000_82580)
+ srrctl |= E1000_SRRCTL_TIMESTAMP;
+ /* Only set Drop Enable if we are supporting multiple queues */
+ if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+ /* set filtering for VMDQ pools */
+ igb_set_vmolr(adapter, reg_idx & 0x7, true);
+
+ rxdctl |= IGB_RX_PTHRESH;
+ rxdctl |= IGB_RX_HTHRESH << 8;
+ rxdctl |= IGB_RX_WTHRESH << 16;
+
+ /* enable receive descriptor fetching */
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ wr32(E1000_RXDCTL(reg_idx), rxdctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+ int i;
+
+ /* set UTA to appropriate mode */
+ igb_set_uta(adapter);
+
+ /* set the correct pool for the PF default MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void igb_free_tx_resources(struct igb_ring *tx_ring)
+{
+ igb_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!tx_ring->desc)
+ return;
+
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_free_tx_resources(adapter->tx_ring[i]);
+}
+
+void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
+ struct igb_tx_buffer *tx_buffer)
+{
+ if (tx_buffer->skb) {
+ dev_kfree_skb_any(tx_buffer->skb);
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_single(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ } else if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ }
+ tx_buffer->next_to_watch = NULL;
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *buffer_info;
+ unsigned long size;
+ u16 i;
+
+ if (!tx_ring->tx_buffer_info)
+ return;
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void igb_free_rx_resources(struct igb_ring *rx_ring)
+{
+ igb_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!rx_ring->desc)
+ return;
+
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_ring *rx_ring)
+{
+ unsigned long size;
+ u16 i;
+
+ if (rx_ring->skb)
+ dev_kfree_skb(rx_ring->skb);
+ rx_ring->skb = NULL;
+
+ if (!rx_ring->rx_buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
+
+ if (!buffer_info->page)
+ continue;
+
+ dma_unmap_page(rx_ring->dev,
+ buffer_info->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ __free_page(buffer_info->page);
+
+ buffer_info->page = NULL;
+ }
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ /* set the correct pool for the new PF MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ return 0;
+}
+
+/**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* The shared function expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ igb_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ igb_rar_set_qsel(adapter, ha->addr,
+ rar_entries--,
+ vfn);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--) {
+ wr32(E1000_RAH(rar_entries), 0);
+ wr32(E1000_RAL(rar_entries), 0);
+ }
+ wrfl();
+
+ return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ u32 rctl, vmolr = 0;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = rd32(E1000_RCTL);
+
+ /* clear the effected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ /* retain VLAN HW filtering if in VT mode */
+ if (adapter->vfs_allocated_count)
+ rctl |= E1000_RCTL_VFE;
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else {
+ /* Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = igb_write_mc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (count) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ }
+ }
+ /* Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
+ */
+ count = igb_write_uc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_UPE;
+ vmolr |= E1000_VMOLR_ROPE;
+ }
+ rctl |= E1000_RCTL_VFE;
+ }
+ wr32(E1000_RCTL, rctl);
+
+ /* In order to support SR-IOV and eventually VMDq it is necessary to set
+ * the VMOLR to enable the appropriate modes. Without this workaround
+ * we will have issues with VLAN tag stripping not being done for frames
+ * that are only arriving because we are the default pool
+ */
+ if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
+ return;
+
+ vmolr |= rd32(E1000_VMOLR(vfn)) &
+ ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+ wr32(E1000_VMOLR(vfn), vmolr);
+ igb_restore_vf_multicasts(adapter);
+}
+
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 wvbr = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ wvbr = rd32(E1000_WVBR);
+ if (!wvbr)
+ return;
+ break;
+ default:
+ break;
+ }
+
+ adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+ int j;
+
+ if (!adapter->wvbr)
+ return;
+
+ for (j = 0; j < adapter->vfs_allocated_count; j++) {
+ if (adapter->wvbr & (1 << j) ||
+ adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+ dev_warn(&adapter->pdev->dev,
+ "Spoof event(s) detected on VF %d\n", j);
+ adapter->wvbr &=
+ ~((1 << j) |
+ (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+ }
+ }
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
+static void igb_update_phy_info(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ igb_get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_has_link - check shared code for link and determine up/down
+ * @adapter: pointer to driver private info
+ **/
+bool igb_has_link(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (!hw->mac.get_link_status)
+ return true;
+ case e1000_media_type_internal_serdes:
+ hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if (((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211)) &&
+ (hw->phy.id == I210_I_PHY_ID)) {
+ if (!netif_carrier_ok(adapter->netdev)) {
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) {
+ adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ }
+ }
+
+ return link_active;
+}
+
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+ bool ret = false;
+ u32 ctrl_ext, thstat;
+
+ /* check for thermal sensor event on i350 copper only */
+ if (hw->mac.type == e1000_i350) {
+ thstat = rd32(E1000_THSTAT);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII))
+ ret = !!(thstat & event);
+ }
+
+ return ret;
+}
+
+/**
+ * igb_check_lvmmc - check for malformed packets received
+ * and indicated in LVMMC register
+ * @adapter: pointer to adapter
+ **/
+static void igb_check_lvmmc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 lvmmc;
+
+ lvmmc = rd32(E1000_LVMMC);
+ if (lvmmc) {
+ if (unlikely(net_ratelimit())) {
+ netdev_warn(adapter->netdev,
+ "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
+ lvmmc);
+ }
+ }
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work,
+ struct igb_adapter,
+ watchdog_task);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_info *phy = &hw->phy;
+ struct net_device *netdev = adapter->netdev;
+ u32 link;
+ int i;
+ u32 connsw;
+
+ link = igb_has_link(adapter);
+
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) {
+ if (time_after(jiffies, (adapter->link_check_timeout + HZ)))
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ else
+ link = false;
+ }
+
+ /* Force link down if we have fiber to swap to */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ connsw = rd32(E1000_CONNSW);
+ if (!(connsw & E1000_CONNSW_AUTOSENSE_EN))
+ link = 0;
+ }
+ }
+ if (link) {
+ /* Perform a reset if the media type changed. */
+ if (hw->dev_spec._82575.media_changed) {
+ hw->dev_spec._82575.media_changed = false;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ igb_reset(adapter);
+ }
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = rd32(E1000_CTRL);
+ /* Links status message must follow this format */
+ netdev_info(netdev,
+ "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
+
+ /* disable EEE if enabled */
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ dev_info(&adapter->pdev->dev,
+ "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
+ adapter->hw.dev_spec._82575.eee_disable = true;
+ adapter->flags &= ~IGB_FLAG_EEE;
+ }
+
+ /* check if SmartSpeed worked */
+ igb_check_downshift(hw);
+ if (phy->speed_downgraded)
+ netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_LINK_THROTTLE))
+ netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ adapter->tx_timeout_factor = 14;
+ break;
+ case SPEED_100:
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+
+ igb_ping_all_vfs(adapter);
+ igb_check_vf_rate_limit(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_PWR_DOWN)) {
+ netdev_err(netdev, "The network adapter was stopped because it overheated\n");
+ }
+
+ /* Links status message must follow this format */
+ netdev_info(netdev, "igb: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ igb_ping_all_vfs(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+
+ /* link is down, time to check for alternate media */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ pm_schedule_suspend(netdev->dev.parent,
+ MSEC_PER_SEC * 5);
+
+ /* also check for alternate media here */
+ } else if (!netif_carrier_ok(netdev) &&
+ (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ }
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = adapter->tx_ring[i];
+ if (!netif_carrier_ok(netdev)) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 eics = 0;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ eics |= adapter->q_vector[i]->eims_value;
+ wr32(E1000_EICS, eics);
+ } else {
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ }
+
+ igb_spoof_check(adapter);
+ igb_ptp_rx_hang(adapter);
+
+ /* Check LVMMC register on i350/i354 only */
+ if ((adapter->hw.mac.type == e1000_i350) ||
+ (adapter->hw.mac.type == e1000_i354))
+ igb_check_lvmmc(adapter);
+
+ /* Reset the timer */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + HZ));
+ else
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * igb_update_ring_itr - update the dynamic ITR value based on packet size
+ * @q_vector: pointer to q_vector
+ *
+ * Stores a new ITR value based on strictly on packet size. This
+ * algorithm is less sophisticated than that used in igb_update_itr,
+ * due to the difficulty of synchronizing statistics across multiple
+ * receive rings. The divisors and thresholds used by this function
+ * were determined based on theoretical maximum wire speed and testing
+ * data, in order to minimize response time while increasing bulk
+ * throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: This function is called only when operating in a multiqueue
+ * receive environment.
+ **/
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
+{
+ int new_val = q_vector->itr_val;
+ int avg_wire_size = 0;
+ struct igb_adapter *adapter = q_vector->adapter;
+ unsigned int packets;
+
+ /* For non-gigabit speeds, just fix the interrupt rate at 4000
+ * ints/sec - ITR timer value of 120 ticks.
+ */
+ if (adapter->link_speed != SPEED_1000) {
+ new_val = IGB_4K_ITR;
+ goto set_itr_val;
+ }
+
+ packets = q_vector->rx.total_packets;
+ if (packets)
+ avg_wire_size = q_vector->rx.total_bytes / packets;
+
+ packets = q_vector->tx.total_packets;
+ if (packets)
+ avg_wire_size = max_t(u32, avg_wire_size,
+ q_vector->tx.total_bytes / packets);
+
+ /* if avg_wire_size isn't set no work was done */
+ if (!avg_wire_size)
+ goto clear_counts;
+
+ /* Add 24 bytes to size to account for CRC, preamble, and gap */
+ avg_wire_size += 24;
+
+ /* Don't starve jumbo frames */
+ avg_wire_size = min(avg_wire_size, 3000);
+
+ /* Give a little boost to mid-size frames */
+ if ((avg_wire_size > 300) && (avg_wire_size < 1200))
+ new_val = avg_wire_size / 3;
+ else
+ new_val = avg_wire_size / 2;
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (new_val < IGB_20K_ITR &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ new_val = IGB_20K_ITR;
+
+set_itr_val:
+ if (new_val != q_vector->itr_val) {
+ q_vector->itr_val = new_val;
+ q_vector->set_itr = 1;
+ }
+clear_counts:
+ q_vector->rx.total_bytes = 0;
+ q_vector->rx.total_packets = 0;
+ q_vector->tx.total_bytes = 0;
+ q_vector->tx.total_packets = 0;
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: pointer to q_vector
+ * @ring_container: ring info to update the itr for
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ **/
+static void igb_update_itr(struct igb_q_vector *q_vector,
+ struct igb_ring_container *ring_container)
+{
+ unsigned int packets = ring_container->total_packets;
+ unsigned int bytes = ring_container->total_bytes;
+ u8 itrval = ring_container->itr;
+
+ /* no packets, exit with status unchanged */
+ if (packets == 0)
+ return;
+
+ switch (itrval) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ itrval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ itrval = bulk_latency;
+ else if ((packets > 35))
+ itrval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ itrval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ itrval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ itrval = low_latency;
+ } else if (bytes < 1500) {
+ itrval = low_latency;
+ }
+ break;
+ }
+
+ /* clear work counters since we have the values we need */
+ ring_container->total_bytes = 0;
+ ring_container->total_packets = 0;
+
+ /* write updated itr to ring container */
+ ring_container->itr = itrval;
+}
+
+static void igb_set_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 new_itr = q_vector->itr_val;
+ u8 current_itr = 0;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = IGB_4K_ITR;
+ goto set_itr_now;
+ }
+
+ igb_update_itr(q_vector, &q_vector->tx);
+ igb_update_itr(q_vector, &q_vector->rx);
+
+ current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (current_itr == lowest_latency &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ current_itr = low_latency;
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
+ break;
+ case low_latency:
+ new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
+ break;
+ case bulk_latency:
+ new_itr = IGB_4K_ITR; /* 4,000 ints/sec */
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != q_vector->itr_val) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > q_vector->itr_val ?
+ max((new_itr * q_vector->itr_val) /
+ (new_itr + (q_vector->itr_val >> 2)),
+ new_itr) : new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ q_vector->itr_val = new_itr;
+ q_vector->set_itr = 1;
+ }
+}
+
+static void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
+ u32 type_tucmd, u32 mss_l4len_idx)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ u16 i = tx_ring->next_to_use;
+
+ context_desc = IGB_TX_CTXTDESC(tx_ring, i);
+
+ i++;
+ tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+ /* set bits to identify this as an advanced context descriptor */
+ type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
+
+ /* For 82575, context index must be unique per ring. */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ mss_l4len_idx |= tx_ring->reg_idx << 4;
+
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = 0;
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+}
+
+static int igb_tso(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ u8 *hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens, type_tucmd;
+ u32 mss_l4len_idx, l4len;
+ int err;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ err = skb_cow_head(skb, 0);
+ if (err < 0)
+ return err;
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ if (first->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM |
+ IGB_TX_FLAGS_IPV4;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM;
+ }
+
+ /* compute header lengths */
+ l4len = tcp_hdrlen(skb);
+ *hdr_len = skb_transport_offset(skb) + l4len;
+
+ /* update gso size and bytecount with header size */
+ first->gso_segs = skb_shinfo(skb)->gso_segs;
+ first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
+ mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
+
+ /* VLAN MACLEN IPLEN */
+ vlan_macip_lens = skb_network_header_len(skb);
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+
+ return 1;
+}
+
+static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens = 0;
+ u32 mss_l4len_idx = 0;
+ u32 type_tucmd = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
+ return;
+ } else {
+ u8 l4_hdr = 0;
+
+ switch (first->protocol) {
+ case htons(ETH_P_IP):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but proto=%x!\n",
+ first->protocol);
+ }
+ break;
+ }
+
+ switch (l4_hdr) {
+ case IPPROTO_TCP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ mss_l4len_idx = tcp_hdrlen(skb) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_SCTP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+ mss_l4len_idx = sizeof(struct sctphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_UDP:
+ mss_l4len_idx = sizeof(struct udphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but l4 proto=%x!\n",
+ l4_hdr);
+ }
+ break;
+ }
+
+ /* update TX checksum flag */
+ first->tx_flags |= IGB_TX_FLAGS_CSUM;
+ }
+
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+}
+
+#define IGB_SET_FLAG(_input, _flag, _result) \
+ ((_flag <= _result) ? \
+ ((u32)(_input & _flag) * (_result / _flag)) : \
+ ((u32)(_input & _flag) / (_flag / _result)))
+
+static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
+{
+ /* set type for advanced descriptor with frame checksum insertion */
+ u32 cmd_type = E1000_ADVTXD_DTYP_DATA |
+ E1000_ADVTXD_DCMD_DEXT |
+ E1000_ADVTXD_DCMD_IFCS;
+
+ /* set HW vlan bit if vlan is present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN,
+ (E1000_ADVTXD_DCMD_VLE));
+
+ /* set segmentation bits for TSO */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO,
+ (E1000_ADVTXD_DCMD_TSE));
+
+ /* set timestamp bit if present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP,
+ (E1000_ADVTXD_MAC_TSTAMP));
+
+ /* insert frame checksum */
+ cmd_type ^= IGB_SET_FLAG(skb->no_fcs, 1, E1000_ADVTXD_DCMD_IFCS);
+
+ return cmd_type;
+}
+
+static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
+ union e1000_adv_tx_desc *tx_desc,
+ u32 tx_flags, unsigned int paylen)
+{
+ u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
+
+ /* 82575 requires a unique index per ring */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ olinfo_status |= tx_ring->reg_idx << 4;
+
+ /* insert L4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_CSUM,
+ (E1000_TXD_POPTS_TXSM << 8));
+
+ /* insert IPv4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_IPV4,
+ (E1000_TXD_POPTS_IXSM << 8));
+
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ struct net_device *netdev = tx_ring->netdev;
+
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it.
+ */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available.
+ */
+ if (igb_desc_unused(tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp2);
+ tx_ring->tx_stats.restart_queue2++;
+ u64_stats_update_end(&tx_ring->tx_syncp2);
+
+ return 0;
+}
+
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ if (igb_desc_unused(tx_ring) >= size)
+ return 0;
+ return __igb_maybe_stop_tx(tx_ring, size);
+}
+
+static void igb_tx_map(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ const u8 hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ struct skb_frag_struct *frag;
+ dma_addr_t dma;
+ unsigned int data_len, size;
+ u32 tx_flags = first->tx_flags;
+ u32 cmd_type = igb_tx_cmd_type(skb, tx_flags);
+ u16 i = tx_ring->next_to_use;
+
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+
+ igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len);
+
+ size = skb_headlen(skb);
+ data_len = skb->data_len;
+
+ dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+ tx_buffer = first;
+
+ for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+ if (dma_mapping_error(tx_ring->dev, dma))
+ goto dma_error;
+
+ /* record length, and DMA address */
+ dma_unmap_len_set(tx_buffer, len, size);
+ dma_unmap_addr_set(tx_buffer, dma, dma);
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+ while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ dma += IGB_MAX_DATA_PER_TXD;
+ size -= IGB_MAX_DATA_PER_TXD;
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+ }
+
+ if (likely(!data_len))
+ break;
+
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ size = skb_frag_size(frag);
+ data_len -= size;
+
+ dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
+ size, DMA_TO_DEVICE);
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ }
+
+ /* write last descriptor with RS and EOP bits */
+ cmd_type |= size | IGB_TXD_DCMD;
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+
+ netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+ /* set the timestamp */
+ first->time_stamp = jiffies;
+
+ /* Force memory writes to complete before letting h/w know there
+ * are new descriptors to fetch. (Only applicable for weak-ordered
+ * memory model archs, such as IA-64).
+ *
+ * We also need this memory barrier to make certain all of the
+ * status bits have been updated before next_to_watch is written.
+ */
+ wmb();
+
+ /* set next_to_watch value indicating a packet is present */
+ first->next_to_watch = tx_desc;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ /* Make sure there is space in the ring for the next send. */
+ igb_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
+ writel(i, tx_ring->tail);
+
+ /* we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
+ mmiowb();
+ }
+ return;
+
+dma_error:
+ dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+ /* clear dma mappings for failed tx_buffer_info map */
+ for (;;) {
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+ if (tx_buffer == first)
+ break;
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ }
+
+ tx_ring->next_to_use = i;
+}
+
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
+ struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *first;
+ int tso;
+ u32 tx_flags = 0;
+ u16 count = TXD_USE_COUNT(skb_headlen(skb));
+ __be16 protocol = vlan_get_protocol(skb);
+ u8 hdr_len = 0;
+
+ /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for context descriptor,
+ * otherwise try next time
+ */
+ if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) {
+ unsigned short f;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+ } else {
+ count += skb_shinfo(skb)->nr_frags;
+ }
+
+ if (igb_maybe_stop_tx(tx_ring, count + 3)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ /* record the location of the first descriptor for this packet */
+ first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+ first->skb = skb;
+ first->bytecount = skb->len;
+ first->gso_segs = 1;
+
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+ struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
+
+ if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS,
+ &adapter->state)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= IGB_TX_FLAGS_TSTAMP;
+
+ adapter->ptp_tx_skb = skb_get(skb);
+ adapter->ptp_tx_start = jiffies;
+ if (adapter->hw.mac.type == e1000_82576)
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ skb_tx_timestamp(skb);
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= IGB_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ /* record initial flags and protocol */
+ first->tx_flags = tx_flags;
+ first->protocol = protocol;
+
+ tso = igb_tso(tx_ring, first, &hdr_len);
+ if (tso < 0)
+ goto out_drop;
+ else if (!tso)
+ igb_tx_csum(tx_ring, first);
+
+ igb_tx_map(tx_ring, first, hdr_len);
+
+ return NETDEV_TX_OK;
+
+out_drop:
+ igb_unmap_and_free_tx_resource(tx_ring, first);
+
+ return NETDEV_TX_OK;
+}
+
+static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
+ struct sk_buff *skb)
+{
+ unsigned int r_idx = skb->queue_mapping;
+
+ if (r_idx >= adapter->num_tx_queues)
+ r_idx = r_idx % adapter->num_tx_queues;
+
+ return adapter->tx_ring[r_idx];
+}
+
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* The minimum packet size with TCTL.PSP set is 17 so pad the skb
+ * in order to meet this minimum size requirement.
+ */
+ if (unlikely(skb->len < 17)) {
+ if (skb_pad(skb, 17 - skb->len))
+ return NETDEV_TX_OK;
+ skb->len = 17;
+ skb_set_tail_pointer(skb, 17);
+ }
+
+ return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+
+ if (hw->mac.type >= e1000_82580)
+ hw->dev_spec._82575.global_device_reset = true;
+
+ schedule_work(&adapter->reset_task);
+ wr32(E1000_EICS,
+ (adapter->eims_enable_mask & ~adapter->eims_other));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter;
+ adapter = container_of(work, struct igb_adapter, reset_task);
+
+ igb_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ **/
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ memcpy(stats, &adapter->stats64, sizeof(*stats));
+ spin_unlock(&adapter->stats64_lock);
+
+ return stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9238
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ /* adjust max frame to be at least the size of a standard frame */
+ if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
+ max_frame = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ /* igb_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+
+ dev_info(&pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+ else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+void igb_update_stats(struct igb_adapter *adapter,
+ struct rtnl_link_stats64 *net_stats)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 reg, mpc;
+ int i;
+ u64 bytes, packets;
+ unsigned int start;
+ u64 _bytes, _packets;
+
+ /* Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ bytes = 0;
+ packets = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ u32 rqdpc = rd32(E1000_RQDPC(i));
+ if (hw->mac.type >= e1000_i210)
+ wr32(E1000_RQDPC(i), 0);
+
+ if (rqdpc) {
+ ring->rx_stats.drops += rqdpc;
+ net_stats->rx_fifo_errors += rqdpc;
+ }
+
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
+ _bytes = ring->rx_stats.bytes;
+ _packets = ring->rx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+
+ net_stats->rx_bytes = bytes;
+ net_stats->rx_packets = packets;
+
+ bytes = 0;
+ packets = 0;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = adapter->tx_ring[i];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
+ _bytes = ring->tx_stats.bytes;
+ _packets = ring->tx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+ net_stats->tx_bytes = bytes;
+ net_stats->tx_packets = packets;
+ rcu_read_unlock();
+
+ /* read stats registers */
+ adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+ adapter->stats.gprc += rd32(E1000_GPRC);
+ adapter->stats.gorc += rd32(E1000_GORCL);
+ rd32(E1000_GORCH); /* clear GORCL */
+ adapter->stats.bprc += rd32(E1000_BPRC);
+ adapter->stats.mprc += rd32(E1000_MPRC);
+ adapter->stats.roc += rd32(E1000_ROC);
+
+ adapter->stats.prc64 += rd32(E1000_PRC64);
+ adapter->stats.prc127 += rd32(E1000_PRC127);
+ adapter->stats.prc255 += rd32(E1000_PRC255);
+ adapter->stats.prc511 += rd32(E1000_PRC511);
+ adapter->stats.prc1023 += rd32(E1000_PRC1023);
+ adapter->stats.prc1522 += rd32(E1000_PRC1522);
+ adapter->stats.symerrs += rd32(E1000_SYMERRS);
+ adapter->stats.sec += rd32(E1000_SEC);
+
+ mpc = rd32(E1000_MPC);
+ adapter->stats.mpc += mpc;
+ net_stats->rx_fifo_errors += mpc;
+ adapter->stats.scc += rd32(E1000_SCC);
+ adapter->stats.ecol += rd32(E1000_ECOL);
+ adapter->stats.mcc += rd32(E1000_MCC);
+ adapter->stats.latecol += rd32(E1000_LATECOL);
+ adapter->stats.dc += rd32(E1000_DC);
+ adapter->stats.rlec += rd32(E1000_RLEC);
+ adapter->stats.xonrxc += rd32(E1000_XONRXC);
+ adapter->stats.xontxc += rd32(E1000_XONTXC);
+ adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+ adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+ adapter->stats.fcruc += rd32(E1000_FCRUC);
+ adapter->stats.gptc += rd32(E1000_GPTC);
+ adapter->stats.gotc += rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH); /* clear GOTCL */
+ adapter->stats.rnbc += rd32(E1000_RNBC);
+ adapter->stats.ruc += rd32(E1000_RUC);
+ adapter->stats.rfc += rd32(E1000_RFC);
+ adapter->stats.rjc += rd32(E1000_RJC);
+ adapter->stats.tor += rd32(E1000_TORH);
+ adapter->stats.tot += rd32(E1000_TOTH);
+ adapter->stats.tpr += rd32(E1000_TPR);
+
+ adapter->stats.ptc64 += rd32(E1000_PTC64);
+ adapter->stats.ptc127 += rd32(E1000_PTC127);
+ adapter->stats.ptc255 += rd32(E1000_PTC255);
+ adapter->stats.ptc511 += rd32(E1000_PTC511);
+ adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+ adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+ adapter->stats.mptc += rd32(E1000_MPTC);
+ adapter->stats.bptc += rd32(E1000_BPTC);
+
+ adapter->stats.tpt += rd32(E1000_TPT);
+ adapter->stats.colc += rd32(E1000_COLC);
+
+ adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+ /* read internal phy specific stats */
+ reg = rd32(E1000_CTRL_EXT);
+ if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+ adapter->stats.rxerrc += rd32(E1000_RXERRC);
+
+ /* this stat has invalid values on i210/i211 */
+ if ((hw->mac.type != e1000_i210) &&
+ (hw->mac.type != e1000_i211))
+ adapter->stats.tncrs += rd32(E1000_TNCRS);
+ }
+
+ adapter->stats.tsctc += rd32(E1000_TSCTC);
+ adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+ adapter->stats.iac += rd32(E1000_IAC);
+ adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+ adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+ adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+ adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+ adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+ adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+ adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+ adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+ /* Fill out the OS statistics structure */
+ net_stats->multicast = adapter->stats.mprc;
+ net_stats->collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
+ net_stats->rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ net_stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ net_stats->rx_crc_errors = adapter->stats.crcerrs;
+ net_stats->rx_frame_errors = adapter->stats.algnerrc;
+ net_stats->rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ net_stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ net_stats->tx_aborted_errors = adapter->stats.ecol;
+ net_stats->tx_window_errors = adapter->stats.latecol;
+ net_stats->tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Management Stats */
+ adapter->stats.mgptc += rd32(E1000_MGTPTC);
+ adapter->stats.mgprc += rd32(E1000_MGTPRC);
+ adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+ /* OS2BMC Stats */
+ reg = rd32(E1000_MANC);
+ if (reg & E1000_MANC_EN_BMC2OS) {
+ adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+ adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+ adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+ adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+ }
+}
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = rd32(E1000_ICR);
+ /* reading ICR causes bit 31 of EICR to be cleared */
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ /* The DMA Out of Sync is also indication of a spoof event
+ * in IOV mode. Check the Wrong VM Behavior register to
+ * see if it is really a spoof event.
+ */
+ igb_check_wvbr(adapter);
+ }
+
+ /* Check for a mailbox event */
+ if (icr & E1000_ICR_VMMB)
+ igb_msg_task(adapter);
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ wr32(E1000_EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_write_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 itr_val = q_vector->itr_val & 0x7FFC;
+
+ if (!q_vector->set_itr)
+ return;
+
+ if (!itr_val)
+ itr_val = 0x4;
+
+ if (adapter->hw.mac.type == e1000_82575)
+ itr_val |= itr_val << 16;
+ else
+ itr_val |= E1000_EITR_CNT_IGNR;
+
+ writel(itr_val, q_vector->itr_register);
+ q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+ struct igb_q_vector *q_vector = data;
+
+ /* Write the ITR value calculated from the previous interrupt. */
+ igb_write_itr(q_vector);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_IGB_DCA
+static void igb_update_tx_dca(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
+ E1000_DCA_TXCTRL_DATA_RRO_EN |
+ E1000_DCA_TXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
+}
+
+static void igb_update_rx_dca(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
+ E1000_DCA_RXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
+}
+
+static void igb_update_dca(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ int cpu = get_cpu();
+
+ if (q_vector->cpu == cpu)
+ goto out_no_update;
+
+ if (q_vector->tx.ring)
+ igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
+
+ if (q_vector->rx.ring)
+ igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
+
+ q_vector->cpu = cpu;
+out_no_update:
+ put_cpu();
+}
+
+static void igb_setup_dca(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
+ return;
+
+ /* Always use CB2 mode, difference is masked in the CB driver. */
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ adapter->q_vector[i]->cpu = -1;
+ igb_update_dca(adapter->q_vector[i]);
+ }
+}
+
+static int __igb_notify_dca(struct device *dev, void *data)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long event = *(unsigned long *)data;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ /* if already enabled, don't do it again */
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+ break;
+ if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ /* without this a class_device is left
+ * hanging around in the sysfs model
+ */
+ dca_remove_requester(dev);
+ dev_info(&pdev->dev, "DCA disabled\n");
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
+ __igb_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_IGB_DCA */
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf)
+{
+ unsigned char mac_addr[ETH_ALEN];
+
+ eth_zero_addr(mac_addr);
+ igb_set_vf_mac(adapter, vf, mac_addr);
+
+ /* By default spoof check is enabled for all VFs */
+ adapter->vf_data[vf].spoofchk_enabled = true;
+
+ return 0;
+}
+
+#endif
+static void igb_ping_all_vfs(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ping;
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
+ ping = E1000_PF_CONTROL_MSG;
+ if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
+ ping |= E1000_VT_MSGTYPE_CTS;
+ igb_write_mbx(hw, &ping, 1, i);
+ }
+}
+
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr = rd32(E1000_VMOLR(vf));
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+ vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
+ IGB_VF_FLAG_MULTI_PROMISC);
+ vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+ vmolr |= E1000_VMOLR_MPME;
+ vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
+ *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+ } else {
+ /* if we have hashes and we are clearing a multicast promisc
+ * flag we need to write the hashes to the MTA as this step
+ * was previously skipped
+ */
+ if (vf_data->num_vf_mc_hashes > 30) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ int j;
+
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ }
+
+ wr32(E1000_VMOLR(vf), vmolr);
+
+ /* there are flags left unprocessed, likely not supported */
+ if (*msgbuf & E1000_VT_MSGINFO_MASK)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int igb_set_vf_multicasts(struct igb_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ int i;
+
+ /* salt away the number of multicast addresses assigned
+ * to this VF for later use to restore when the PF multi cast
+ * list changes
+ */
+ vf_data->num_vf_mc_hashes = n;
+
+ /* only up to 30 hash values supported */
+ if (n > 30)
+ n = 30;
+
+ /* store the hashes for later use */
+ for (i = 0; i < n; i++)
+ vf_data->vf_mc_hashes[i] = hash_list[i];
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+
+ return 0;
+}
+
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data;
+ int i, j;
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ u32 vmolr = rd32(E1000_VMOLR(i));
+
+ vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ vf_data = &adapter->vf_data[i];
+
+ if ((vf_data->num_vf_mc_hashes > 30) ||
+ (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ wr32(E1000_VMOLR(i), vmolr);
+ }
+}
+
+static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pool_mask, reg, vid;
+ int i;
+
+ pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+
+ /* remove the vf from the pool */
+ reg &= ~pool_mask;
+
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
+ (reg & E1000_VLVF_VLANID_ENABLE)) {
+ reg = 0;
+ vid = reg & E1000_VLVF_VLANID_MASK;
+ igb_vfta_set(hw, vid, false);
+ }
+
+ wr32(E1000_VLVF(i), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled = 0;
+}
+
+static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg, i;
+
+ /* The vlvf table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return -1;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return -1;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (add) {
+ if (i == E1000_VLVF_ARRAY_SIZE) {
+ /* Did not find a matching VLAN ID entry that was
+ * enabled. Search for a free filter entry, i.e.
+ * one without the enable bit set
+ */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if (!(reg & E1000_VLVF_VLANID_ENABLE))
+ break;
+ }
+ }
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* Found an enabled/available entry */
+ reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* if !enabled we need to set this up in vfta */
+ if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ reg |= E1000_VLVF_VLANID_ENABLE;
+ }
+ reg &= ~E1000_VLVF_VLANID_MASK;
+ reg |= vid;
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size += 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled++;
+ }
+ } else {
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* remove vf from the pool */
+ reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
+ reg = 0;
+ igb_vfta_set(hw, vid, false);
+ }
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ adapter->vf_data[vf].vlans_enabled--;
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size -= 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+ }
+ }
+ return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (vid)
+ wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+ else
+ wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos)
+{
+ int err = 0;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+ if (vlan || qos) {
+ err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+ if (err)
+ goto out;
+ igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+ igb_set_vmolr(adapter, vf, !vlan);
+ adapter->vf_data[vf].pf_vlan = vlan;
+ adapter->vf_data[vf].pf_qos = qos;
+ dev_info(&adapter->pdev->dev,
+ "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF VLAN has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ } else {
+ igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+ false, vf);
+ igb_set_vmvir(adapter, vlan, vf);
+ igb_set_vmolr(adapter, vf, true);
+ adapter->vf_data[vf].pf_vlan = 0;
+ adapter->vf_data[vf].pf_qos = 0;
+ }
+out:
+ return err;
+}
+
+static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+ u32 reg;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (i >= E1000_VLVF_ARRAY_SIZE)
+ i = -1;
+
+ return i;
+}
+
+static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+ int err = 0;
+
+ /* If in promiscuous mode we need to make sure the PF also has
+ * the VLAN filter set.
+ */
+ if (add && (adapter->netdev->flags & IFF_PROMISC))
+ err = igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ if (err)
+ goto out;
+
+ err = igb_vlvf_set(adapter, vid, add, vf);
+
+ if (err)
+ goto out;
+
+ /* Go through all the checks to see if the VLAN filter should
+ * be wiped completely.
+ */
+ if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
+ u32 vlvf, bits;
+ int regndx = igb_find_vlvf_entry(adapter, vid);
+
+ if (regndx < 0)
+ goto out;
+ /* See if any other pools are set for this VLAN filter
+ * entry other than the PF.
+ */
+ vlvf = bits = rd32(E1000_VLVF(regndx));
+ bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
+ adapter->vfs_allocated_count);
+ /* If the filter was removed then ensure PF pool bit
+ * is cleared if the PF only added itself to the pool
+ * because the PF is in promiscuous mode.
+ */
+ if ((vlvf & VLAN_VID_MASK) == vid &&
+ !test_bit(vid, adapter->active_vlans) &&
+ !bits)
+ igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ }
+
+out:
+ return err;
+}
+
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
+{
+ /* clear flags - except flag that indicates PF has set the MAC */
+ adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
+ adapter->vf_data[vf].last_nack = jiffies;
+
+ /* reset offloads to defaults */
+ igb_set_vmolr(adapter, vf, true);
+
+ /* reset vlans for device */
+ igb_clear_vf_vfta(adapter, vf);
+ if (adapter->vf_data[vf].pf_vlan)
+ igb_ndo_set_vf_vlan(adapter->netdev, vf,
+ adapter->vf_data[vf].pf_vlan,
+ adapter->vf_data[vf].pf_qos);
+ else
+ igb_clear_vf_vfta(adapter, vf);
+
+ /* reset multicast table array for vf */
+ adapter->vf_data[vf].num_vf_mc_hashes = 0;
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+}
+
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+ /* clear mac address as we were hotplug removed/added */
+ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+ eth_zero_addr(vf_mac);
+
+ /* process remaining reset events */
+ igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+ u32 reg, msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* process all the same items cleared in a function level reset */
+ igb_vf_reset(adapter, vf);
+
+ /* set vf mac address */
+ igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
+
+ /* enable transmit and receive for vf */
+ reg = rd32(E1000_VFTE);
+ wr32(E1000_VFTE, reg | (1 << vf));
+ reg = rd32(E1000_VFRE);
+ wr32(E1000_VFRE, reg | (1 << vf));
+
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
+
+ /* reply to reset with ack and vf mac address */
+ msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+ memcpy(addr, vf_mac, ETH_ALEN);
+ igb_write_mbx(hw, msgbuf, 3, vf);
+}
+
+static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
+{
+ /* The VF MAC Address is stored in a packed array of bytes
+ * starting at the second 32 bit word of the msg array
+ */
+ unsigned char *addr = (char *)&msg[1];
+ int err = -1;
+
+ if (is_valid_ether_addr(addr))
+ err = igb_set_vf_mac(adapter, vf, addr);
+
+ return err;
+}
+
+static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ u32 msg = E1000_VT_MSGTYPE_NACK;
+
+ /* if device isn't clear to send it shouldn't be reading either */
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+ time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+ igb_write_mbx(hw, &msg, 1, vf);
+ vf_data->last_nack = jiffies;
+ }
+}
+
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ s32 retval;
+
+ retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
+
+ if (retval) {
+ /* if receive failed revoke VF CTS stats and restart init */
+ dev_err(&pdev->dev, "Error receiving message from VF\n");
+ vf_data->flags &= ~IGB_VF_FLAG_CTS;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ goto out;
+ }
+
+ /* this is a message we already processed, do nothing */
+ if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
+ return;
+
+ /* until the vf completes a reset it should not be
+ * allowed to start any configuration.
+ */
+ if (msgbuf[0] == E1000_VF_RESET) {
+ igb_vf_reset_msg(adapter, vf);
+ return;
+ }
+
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ retval = -1;
+ goto out;
+ }
+
+ switch ((msgbuf[0] & 0xFFFF)) {
+ case E1000_VF_SET_MAC_ADDR:
+ retval = -EINVAL;
+ if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+ retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+ else
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
+ vf);
+ break;
+ case E1000_VF_SET_PROMISC:
+ retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_MULTICAST:
+ retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_LPE:
+ retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
+ break;
+ case E1000_VF_SET_VLAN:
+ retval = -1;
+ if (vf_data->pf_vlan)
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
+ vf);
+ else
+ retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+ retval = -1;
+ break;
+ }
+
+ msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
+ /* notify the VF of the results of what it sent us */
+ if (retval)
+ msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
+ else
+ msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
+
+ igb_write_mbx(hw, msgbuf, 1, vf);
+}
+
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vf;
+
+ for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+ /* process any reset requests */
+ if (!igb_check_for_rst(hw, vf))
+ igb_vf_reset_event(adapter, vf);
+
+ /* process any messages pending */
+ if (!igb_check_for_msg(hw, vf))
+ igb_rcv_msg_from_vf(adapter, vf);
+
+ /* process any acks */
+ if (!igb_check_for_ack(hw, vf))
+ igb_rcv_ack_from_vf(adapter, vf);
+ }
+}
+
+/**
+ * igb_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return;
+
+ for (i = 0; i < hw->mac.uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* read ICR disables interrupts using IAM */
+ u32 icr = rd32(E1000_ICR);
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Legacy Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write
+ */
+ u32 icr = rd32(E1000_ICR);
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_ring_irq_enable(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
+ (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
+ if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
+ igb_set_itr(q_vector);
+ else
+ igb_update_ring_itr(q_vector);
+ }
+
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMS, q_vector->eims_value);
+ else
+ igb_irq_enable(adapter);
+ }
+}
+
+/**
+ * igb_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ **/
+static int igb_poll(struct napi_struct *napi, int budget)
+{
+ struct igb_q_vector *q_vector = container_of(napi,
+ struct igb_q_vector,
+ napi);
+ bool clean_complete = true;
+
+#ifdef CONFIG_IGB_DCA
+ if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+ igb_update_dca(q_vector);
+#endif
+ if (q_vector->tx.ring)
+ clean_complete = igb_clean_tx_irq(q_vector);
+
+ if (q_vector->rx.ring)
+ clean_complete &= igb_clean_rx_irq(q_vector, budget);
+
+ /* If all work not completed, return budget and keep polling */
+ if (!clean_complete)
+ return budget;
+
+ /* If not enough Rx work done, exit the polling mode */
+ napi_complete(napi);
+ igb_ring_irq_enable(q_vector);
+
+ return 0;
+}
+
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: pointer to q_vector containing needed info
+ *
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct igb_ring *tx_ring = q_vector->tx.ring;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int budget = q_vector->tx.work_limit;
+ unsigned int i = tx_ring->next_to_clean;
+
+ if (test_bit(__IGB_DOWN, &adapter->state))
+ return true;
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ i -= tx_ring->count;
+
+ do {
+ union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+ /* if next_to_watch is not set then there is no work pending */
+ if (!eop_desc)
+ break;
+
+ /* prevent any other reads prior to eop_desc */
+ read_barrier_depends();
+
+ /* if DD is not set pending work has not been completed */
+ if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
+ break;
+
+ /* clear next_to_watch to prevent false hangs */
+ tx_buffer->next_to_watch = NULL;
+
+ /* update the statistics for this packet */
+ total_bytes += tx_buffer->bytecount;
+ total_packets += tx_buffer->gso_segs;
+
+ /* free the skb */
+ dev_consume_skb_any(tx_buffer->skb);
+
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+
+ /* clear tx_buffer data */
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ /* clear last DMA location and unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+ }
+ }
+
+ /* move us one more past the eop_desc for start of next pkt */
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* issue prefetch for next Tx descriptor */
+ prefetch(tx_desc);
+
+ /* update budget accounting */
+ budget--;
+ } while (likely(budget));
+
+ netdev_tx_completed_queue(txring_txq(tx_ring),
+ total_packets, total_bytes);
+ i += tx_ring->count;
+ tx_ring->next_to_clean = i;
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.bytes += total_bytes;
+ tx_ring->tx_stats.packets += total_packets;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ q_vector->tx.total_bytes += total_bytes;
+ q_vector->tx.total_packets += total_packets;
+
+ if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
+ clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ if (tx_buffer->next_to_watch &&
+ time_after(jiffies, tx_buffer->time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ dev_err(tx_ring->dev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%p>\n"
+ " jiffies <%lx>\n"
+ " desc.status <%x>\n",
+ tx_ring->queue_index,
+ rd32(E1000_TDH(tx_ring->reg_idx)),
+ readl(tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_buffer->time_stamp,
+ tx_buffer->next_to_watch,
+ jiffies,
+ tx_buffer->next_to_watch->wb.status);
+ netif_stop_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ /* we are about to reset, no point in enabling stuff */
+ return true;
+ }
+ }
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(total_packets &&
+ netif_carrier_ok(tx_ring->netdev) &&
+ igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev,
+ tx_ring->queue_index) &&
+ !(test_bit(__IGB_DOWN, &adapter->state))) {
+ netif_wake_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.restart_queue++;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ }
+ }
+
+ return !!budget;
+}
+
+/**
+ * igb_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void igb_reuse_rx_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *old_buff)
+{
+ struct igb_rx_buffer *new_buff;
+ u16 nta = rx_ring->next_to_alloc;
+
+ new_buff = &rx_ring->rx_buffer_info[nta];
+
+ /* update, and store next to alloc */
+ nta++;
+ rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+ /* transfer page from old buffer to new buffer */
+ *new_buff = *old_buff;
+
+ /* sync the buffer for use by the device */
+ dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
+ old_buff->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+}
+
+static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
+ struct page *page,
+ unsigned int truesize)
+{
+ /* avoid re-using remote pages */
+ if (unlikely(page_to_nid(page) != numa_node_id()))
+ return false;
+
+ if (unlikely(page->pfmemalloc))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= IGB_RX_BUFSZ;
+
+ /* Even if we own the page, we are not allowed to use atomic_set()
+ * This would break get_page_unless_zero() users.
+ */
+ atomic_inc(&page->_count);
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
+ return false;
+
+ /* bump ref count on page before it is given to the stack */
+ get_page(page);
+#endif
+
+ return true;
+}
+
+/**
+ * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool igb_add_rx_frag(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *rx_buffer,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct page *page = rx_buffer->page;
+ unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
+#if (PAGE_SIZE < 8192)
+ unsigned int truesize = IGB_RX_BUFSZ;
+#else
+ unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+#endif
+
+ if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) {
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+ va += IGB_TS_HDR_LEN;
+ size -= IGB_TS_HDR_LEN;
+ }
+
+ memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+ /* we can reuse buffer as-is, just make sure it is local */
+ if (likely((page_to_nid(page) == numa_node_id()) &&
+ !page->pfmemalloc))
+ return true;
+
+ /* this page cannot be reused so discard it */
+ put_page(page);
+ return false;
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ rx_buffer->page_offset, size, truesize);
+
+ return igb_can_reuse_rx_page(rx_buffer, page, truesize);
+}
+
+static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct igb_rx_buffer *rx_buffer;
+ struct page *page;
+
+ rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+
+ page = rx_buffer->page;
+ prefetchw(page);
+
+ if (likely(!skb)) {
+ void *page_addr = page_address(page) +
+ rx_buffer->page_offset;
+
+ /* prefetch first cache line of first page */
+ prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+ prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+ /* allocate a skb to store the frags */
+ skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+ IGB_RX_HDR_LEN);
+ if (unlikely(!skb)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return NULL;
+ }
+
+ /* we will be copying header into skb->data in
+ * pskb_may_pull so it is in our interest to prefetch
+ * it now to avoid a possible cache miss
+ */
+ prefetchw(skb->data);
+ }
+
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* pull page into skb */
+ if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ /* hand second half of page back to the ring */
+ igb_reuse_rx_page(rx_ring, rx_buffer);
+ } else {
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page(rx_ring->dev, rx_buffer->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ }
+
+ /* clear contents of rx_buffer */
+ rx_buffer->page = NULL;
+
+ return skb;
+}
+
+static inline void igb_rx_checksum(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
+ return;
+
+ /* Rx checksum disabled via ethtool */
+ if (!(ring->netdev->features & NETIF_F_RXCSUM))
+ return;
+
+ /* TCP/UDP checksum error bit is set */
+ if (igb_test_staterr(rx_desc,
+ E1000_RXDEXT_STATERR_TCPE |
+ E1000_RXDEXT_STATERR_IPE)) {
+ /* work around errata with sctp packets where the TCPE aka
+ * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+ * packets, (aka let the stack check the crc32c)
+ */
+ if (!((skb->len == 60) &&
+ test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
+ u64_stats_update_begin(&ring->rx_syncp);
+ ring->rx_stats.csum_err++;
+ u64_stats_update_end(&ring->rx_syncp);
+ }
+ /* let the stack verify checksum errors */
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
+ E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dev_dbg(ring->dev, "cksum success: bits %08X\n",
+ le32_to_cpu(rx_desc->wb.upper.status_error));
+}
+
+static inline void igb_rx_hash(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (ring->netdev->features & NETIF_F_RXHASH)
+ skb_set_hash(skb,
+ le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+ PKT_HASH_TYPE_L3);
+}
+
+/**
+ * igb_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean. If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool igb_is_non_eop(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc)
+{
+ u32 ntc = rx_ring->next_to_clean + 1;
+
+ /* fetch, update, and store next to clean */
+ ntc = (ntc < rx_ring->count) ? ntc : 0;
+ rx_ring->next_to_clean = ntc;
+
+ prefetch(IGB_RX_DESC(rx_ring, ntc));
+
+ if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)))
+ return false;
+
+ return true;
+}
+
+/**
+ * igb_pull_tail - igb specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an igb specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void igb_pull_tail(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /* it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ /* retrieve timestamp from buffer */
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+
+ /* update pointers to remove timestamp header */
+ skb_frag_size_sub(frag, IGB_TS_HDR_LEN);
+ frag->page_offset += IGB_TS_HDR_LEN;
+ skb->data_len -= IGB_TS_HDR_LEN;
+ skb->len -= IGB_TS_HDR_LEN;
+
+ /* move va to start of packet data */
+ va += IGB_TS_HDR_LEN;
+ }
+
+ /* we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, IGB_RX_HDR_LEN);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+}
+
+/**
+ * igb_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool igb_cleanup_headers(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (unlikely((igb_test_staterr(rx_desc,
+ E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) {
+ struct net_device *netdev = rx_ring->netdev;
+ if (!(netdev->features & NETIF_F_RXALL)) {
+ dev_kfree_skb_any(skb);
+ return true;
+ }
+ }
+
+ /* place header in linear portion of buffer */
+ if (skb_is_nonlinear(skb))
+ igb_pull_tail(rx_ring, rx_desc, skb);
+
+ /* if skb_pad returns an error the skb was freed */
+ if (unlikely(skb->len < 60)) {
+ int pad_len = 60 - skb->len;
+
+ if (skb_pad(skb, pad_len))
+ return true;
+ __skb_put(skb, pad_len);
+ }
+
+ return false;
+}
+
+/**
+ * igb_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static void igb_process_skb_fields(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct net_device *dev = rx_ring->netdev;
+
+ igb_rx_hash(rx_ring, rx_desc, skb);
+
+ igb_rx_checksum(rx_ring, rx_desc, skb);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) &&
+ !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))
+ igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
+
+ if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
+ u16 vid;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
+ test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
+ vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+ else
+ vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+ }
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+}
+
+static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
+{
+ struct igb_ring *rx_ring = q_vector->rx.ring;
+ struct sk_buff *skb = rx_ring->skb;
+ unsigned int total_bytes = 0, total_packets = 0;
+ u16 cleaned_count = igb_desc_unused(rx_ring);
+
+ while (likely(total_packets < budget)) {
+ union e1000_adv_rx_desc *rx_desc;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+ if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD))
+ break;
+
+ /* This memory barrier is needed to keep us from reading
+ * any other fields out of the rx_desc until we know the
+ * RXD_STAT_DD bit is set
+ */
+ rmb();
+
+ /* retrieve a buffer from the ring */
+ skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);
+
+ /* exit if we failed to retrieve a buffer */
+ if (!skb)
+ break;
+
+ cleaned_count++;
+
+ /* fetch next buffer in frame if non-eop */
+ if (igb_is_non_eop(rx_ring, rx_desc))
+ continue;
+
+ /* verify the packet layout is correct */
+ if (igb_cleanup_headers(rx_ring, rx_desc, skb)) {
+ skb = NULL;
+ continue;
+ }
+
+ /* probably a little skewed due to removing CRC */
+ total_bytes += skb->len;
+
+ /* populate checksum, timestamp, VLAN, and protocol */
+ igb_process_skb_fields(rx_ring, rx_desc, skb);
+
+ napi_gro_receive(&q_vector->napi, skb);
+
+ /* reset skb pointer */
+ skb = NULL;
+
+ /* update budget accounting */
+ total_packets++;
+ }
+
+ /* place incomplete frames back on ring for completion */
+ rx_ring->skb = skb;
+
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.packets += total_packets;
+ rx_ring->rx_stats.bytes += total_bytes;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ q_vector->rx.total_packets += total_packets;
+ q_vector->rx.total_bytes += total_bytes;
+
+ if (cleaned_count)
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ return total_packets < budget;
+}
+
+static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *bi)
+{
+ struct page *page = bi->page;
+ dma_addr_t dma;
+
+ /* since we are recycling buffers we should seldom need to alloc */
+ if (likely(page))
+ return true;
+
+ /* alloc new page for storage */
+ page = __skb_alloc_page(GFP_ATOMIC | __GFP_COLD, NULL);
+ if (unlikely(!page)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ /* map page for use */
+ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+
+ /* if mapping failed free memory back to system since
+ * there isn't much point in holding memory we can't use
+ */
+ if (dma_mapping_error(rx_ring->dev, dma)) {
+ __free_page(page);
+
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ bi->dma = dma;
+ bi->page = page;
+ bi->page_offset = 0;
+
+ return true;
+}
+
+/**
+ * igb_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_rx_buffer *bi;
+ u16 i = rx_ring->next_to_use;
+
+ /* nothing to do */
+ if (!cleaned_count)
+ return;
+
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ bi = &rx_ring->rx_buffer_info[i];
+ i -= rx_ring->count;
+
+ do {
+ if (!igb_alloc_mapped_page(rx_ring, bi))
+ break;
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
+
+ rx_desc++;
+ bi++;
+ i++;
+ if (unlikely(!i)) {
+ rx_desc = IGB_RX_DESC(rx_ring, 0);
+ bi = rx_ring->rx_buffer_info;
+ i -= rx_ring->count;
+ }
+
+ /* clear the hdr_addr for the next_to_use descriptor */
+ rx_desc->read.hdr_addr = 0;
+
+ cleaned_count--;
+ } while (cleaned_count);
+
+ i += rx_ring->count;
+
+ if (rx_ring->next_to_use != i) {
+ /* record the next descriptor to use */
+ rx_ring->next_to_use = i;
+
+ /* update next to alloc since we have filled the ring */
+ rx_ring->next_to_alloc = i;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(i, rx_ring->tail);
+ }
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return igb_mii_ioctl(netdev, ifr, cmd);
+ case SIOCGHWTSTAMP:
+ return igb_ptp_get_ts_config(netdev, ifr);
+ case SIOCSHWTSTAMP:
+ return igb_ptp_set_ts_config(netdev, ifr);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_read_word(adapter->pdev, reg, value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_write_word(adapter->pdev, reg, *value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+ bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX);
+
+ if (enable) {
+ /* enable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Disable CFI check */
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ wr32(E1000_RCTL, rctl);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+ }
+
+ igb_rlpml_set(adapter);
+}
+
+static int igb_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+
+ /* attempt to add filter to vlvf array */
+ igb_vlvf_set(adapter, vid, true, pf_id);
+
+ /* add the filter since PF can receive vlans w/o entry in vlvf */
+ igb_vfta_set(hw, vid, true);
+
+ set_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static int igb_vlan_rx_kill_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+ s32 err;
+
+ /* remove vlan from VLVF table array */
+ err = igb_vlvf_set(adapter, vid, false, pf_id);
+
+ /* if vid was not present in VLVF just remove it from table */
+ if (err)
+ igb_vfta_set(hw, vid, false);
+
+ clear_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+ u16 vid;
+
+ igb_vlan_mode(adapter->netdev, adapter->netdev->features);
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work
+ */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NIC's only allow 1000 gbps Full duplex
+ * and 100Mbps Full duplex for 100baseFx sfp
+ */
+ if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ case SPEED_10 + DUPLEX_FULL:
+ case SPEED_100 + DUPLEX_HALF:
+ goto err_inval;
+ default:
+ break;
+ }
+ }
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
+ return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ bool runtime)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl, status;
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ __igb_close(netdev, true);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ igb_setup_rctl(adapter);
+ igb_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ wr32(E1000_RCTL, rctl);
+ }
+
+ ctrl = rd32(E1000_CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Allow time for pending master requests to run */
+ igb_disable_pcie_master(hw);
+
+ wr32(E1000_WUC, E1000_WUC_PME_EN);
+ wr32(E1000_WUFC, wufc);
+ } else {
+ wr32(E1000_WUC, 0);
+ wr32(E1000_WUFC, 0);
+ }
+
+ *enable_wake = wufc || adapter->en_mng_pt;
+ if (!*enable_wake)
+ igb_power_down_link(adapter);
+ else
+ igb_power_up_link(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *dev)
+{
+ int retval;
+ bool wake;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ retval = __igb_shutdown(pdev, &wake, 0);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int igb_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ if (!pci_device_is_present(pdev))
+ return -ENODEV;
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "igb: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ wr32(E1000_WUS, ~0);
+
+ if (netdev->flags & IFF_UP) {
+ rtnl_lock();
+ err = __igb_open(netdev, true);
+ rtnl_unlock();
+ if (err)
+ return err;
+ }
+
+ netif_device_attach(netdev);
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (!igb_has_link(adapter))
+ pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
+
+ return -EBUSY;
+}
+
+static int igb_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake, 1);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int igb_runtime_resume(struct device *dev)
+{
+ return igb_resume(dev);
+}
+#endif /* CONFIG_PM_RUNTIME */
+#endif
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __igb_shutdown(pdev, &wake, 0);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_sriov_reinit(struct pci_dev *dev)
+{
+ struct net_device *netdev = pci_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ rtnl_lock();
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+ else
+ igb_reset(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+
+ igb_init_queue_configuration(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ igb_open(netdev);
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+static int igb_pci_disable_sriov(struct pci_dev *dev)
+{
+ int err = igb_disable_sriov(dev);
+
+ if (!err)
+ err = igb_sriov_reinit(dev);
+
+ return err;
+}
+
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
+{
+ int err = igb_enable_sriov(dev, num_vfs);
+
+ if (err)
+ goto out;
+
+ err = igb_sriov_reinit(dev);
+ if (!err)
+ return num_vfs;
+
+out:
+ return err;
+}
+
+#endif
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+ if (num_vfs == 0)
+ return igb_pci_disable_sriov(dev);
+ else
+ return igb_pci_enable_sriov(dev, num_vfs);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_q_vector *q_vector;
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMC, q_vector->eims_value);
+ else
+ igb_irq_disable(adapter);
+ napi_schedule(&q_vector->napi);
+ }
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ **/
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ **/
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ pci_ers_result_t result;
+ int err;
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ err = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
+ err);
+ /* non-fatal, continue */
+ }
+
+ return result;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igb_up(adapter)) {
+ dev_err(&pdev->dev, "igb_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+}
+
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+ u8 qsel)
+{
+ u32 rar_low, rar_high;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+
+ if (hw->mac.type == e1000_82575)
+ rar_high |= E1000_RAH_POOL_1 * qsel;
+ else
+ rar_high |= E1000_RAH_POOL_1 << qsel;
+
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+static int igb_set_vf_mac(struct igb_adapter *adapter,
+ int vf, unsigned char *mac_addr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ /* VF MAC addresses start at end of receive addresses and moves
+ * towards the first, as a result a collision should not be possible
+ */
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+
+ memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+
+ igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+ return -EINVAL;
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+ dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+ dev_info(&adapter->pdev->dev,
+ "Reload the VF driver to make this change effective.");
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF MAC address has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_link_mbps(int internal_link_speed)
+{
+ switch (internal_link_speed) {
+ case SPEED_100:
+ return 100;
+ case SPEED_1000:
+ return 1000;
+ default:
+ return 0;
+ }
+}
+
+static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
+ int link_speed)
+{
+ int rf_dec, rf_int;
+ u32 bcnrc_val;
+
+ if (tx_rate != 0) {
+ /* Calculate the rate factor values to set */
+ rf_int = link_speed / tx_rate;
+ rf_dec = (link_speed - (rf_int * tx_rate));
+ rf_dec = (rf_dec * (1 << E1000_RTTBCNRC_RF_INT_SHIFT)) /
+ tx_rate;
+
+ bcnrc_val = E1000_RTTBCNRC_RS_ENA;
+ bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) &
+ E1000_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
+ } else {
+ bcnrc_val = 0;
+ }
+
+ wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
+ /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
+ * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
+ */
+ wr32(E1000_RTTBCNRM, 0x14);
+ wr32(E1000_RTTBCNRC, bcnrc_val);
+}
+
+static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
+{
+ int actual_link_speed, i;
+ bool reset_rate = false;
+
+ /* VF TX rate limit was not set or not supported */
+ if ((adapter->vf_rate_link_speed == 0) ||
+ (adapter->hw.mac.type != e1000_82576))
+ return;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if (actual_link_speed != adapter->vf_rate_link_speed) {
+ reset_rate = true;
+ adapter->vf_rate_link_speed = 0;
+ dev_info(&adapter->pdev->dev,
+ "Link speed has been changed. VF Transmit rate is disabled\n");
+ }
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ if (reset_rate)
+ adapter->vf_data[i].tx_rate = 0;
+
+ igb_set_vf_rate_limit(&adapter->hw, i,
+ adapter->vf_data[i].tx_rate,
+ actual_link_speed);
+ }
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
+ int min_tx_rate, int max_tx_rate)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int actual_link_speed;
+
+ if (hw->mac.type != e1000_82576)
+ return -EOPNOTSUPP;
+
+ if (min_tx_rate)
+ return -EINVAL;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if ((vf >= adapter->vfs_allocated_count) ||
+ (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
+ (max_tx_rate < 0) ||
+ (max_tx_rate > actual_link_speed))
+ return -EINVAL;
+
+ adapter->vf_rate_link_speed = actual_link_speed;
+ adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
+ igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg_val, reg_offset;
+
+ if (!adapter->vfs_allocated_count)
+ return -EOPNOTSUPP;
+
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+
+ reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC;
+ reg_val = rd32(reg_offset);
+ if (setting)
+ reg_val |= ((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ else
+ reg_val &= ~((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ wr32(reg_offset, reg_val);
+
+ adapter->vf_data[vf].spoofchk_enabled = setting;
+ return 0;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+ ivi->vf = vf;
+ memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+ ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
+ ivi->min_tx_rate = 0;
+ ivi->vlan = adapter->vf_data[vf].pf_vlan;
+ ivi->qos = adapter->vf_data[vf].pf_qos;
+ ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;
+ return 0;
+}
+
+static void igb_vmm_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ case e1000_i354:
+ default:
+ /* replication is not supported for 82575 */
+ return;
+ case e1000_82576:
+ /* notify HW that the MAC is adding vlan tags */
+ reg = rd32(E1000_DTXCTL);
+ reg |= E1000_DTXCTL_VLAN_ADDED;
+ wr32(E1000_DTXCTL, reg);
+ /* Fall through */
+ case e1000_82580:
+ /* enable replication vlan tag stripping */
+ reg = rd32(E1000_RPLOLR);
+ reg |= E1000_RPLOLR_STRVLAN;
+ wr32(E1000_RPLOLR, reg);
+ /* Fall through */
+ case e1000_i350:
+ /* none of the above registers are supported by i350 */
+ break;
+ }
+
+ if (adapter->vfs_allocated_count) {
+ igb_vmdq_set_loopback_pf(hw, true);
+ igb_vmdq_set_replication_pf(hw, true);
+ igb_vmdq_set_anti_spoofing_pf(hw, true,
+ adapter->vfs_allocated_count);
+ } else {
+ igb_vmdq_set_loopback_pf(hw, false);
+ igb_vmdq_set_replication_pf(hw, false);
+ }
+}
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 dmac_thr;
+ u16 hwm;
+
+ if (hw->mac.type > e1000_82580) {
+ if (adapter->flags & IGB_FLAG_DMAC) {
+ u32 reg;
+
+ /* force threshold to 0. */
+ wr32(E1000_DMCTXTH, 0);
+
+ /* DMA Coalescing high water mark needs to be greater
+ * than the Rx threshold. Set hwm to PBA - max frame
+ * size in 16B units, capping it at PBA - 6KB.
+ */
+ hwm = 64 * pba - adapter->max_frame_size / 16;
+ if (hwm < 64 * (pba - 6))
+ hwm = 64 * (pba - 6);
+ reg = rd32(E1000_FCRTC);
+ reg &= ~E1000_FCRTC_RTH_COAL_MASK;
+ reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
+ & E1000_FCRTC_RTH_COAL_MASK);
+ wr32(E1000_FCRTC, reg);
+
+ /* Set the DMA Coalescing Rx threshold to PBA - 2 * max
+ * frame size, capping it at PBA - 10KB.
+ */
+ dmac_thr = pba - adapter->max_frame_size / 512;
+ if (dmac_thr < pba - 10)
+ dmac_thr = pba - 10;
+ reg = rd32(E1000_DMACR);
+ reg &= ~E1000_DMACR_DMACTHR_MASK;
+ reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
+ & E1000_DMACR_DMACTHR_MASK);
+
+ /* transition to L0x or L1 if available..*/
+ reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
+
+ /* watchdog timer= +-1000 usec in 32usec intervals */
+ reg |= (1000 >> 5);
+
+ /* Disable BMC-to-OS Watchdog Enable */
+ if (hw->mac.type != e1000_i354)
+ reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
+
+ wr32(E1000_DMACR, reg);
+
+ /* no lower threshold to disable
+ * coalescing(smart fifb)-UTRESH=0
+ */
+ wr32(E1000_DMCRTRH, 0);
+
+ reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
+
+ wr32(E1000_DMCTLX, reg);
+
+ /* free space in tx packet buffer to wake from
+ * DMA coal
+ */
+ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
+ (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+
+ /* make low power state decision controlled
+ * by DMA coal
+ */
+ reg = rd32(E1000_PCIEMISC);
+ reg &= ~E1000_PCIEMISC_LX_DECISION;
+ wr32(E1000_PCIEMISC, reg);
+ } /* endif adapter->dmac is not disabled */
+ } else if (hw->mac.type == e1000_82580) {
+ u32 reg = rd32(E1000_PCIEMISC);
+
+ wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
+ wr32(E1000_DMACR, 0);
+ }
+}
+
+/**
+ * igb_read_i2c_byte - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: device address
+ * @data: value read
+ *
+ * Performs byte read operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = 0;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+
+ status = i2c_smbus_read_byte_data(this_client, byte_offset);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status < 0)
+ return E1000_ERR_I2C;
+ else {
+ *data = status;
+ return 0;
+ }
+}
+
+/**
+ * igb_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: device address
+ * @data: value to write
+ *
+ * Performs byte write operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+ status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status)
+ return E1000_ERR_I2C;
+ else
+ return 0;
+
+}
+
+int igb_reinit_queues(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+
+ igb_reset_interrupt_capability(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ err = igb_open(netdev);
+
+ return err;
+}
+/* igb_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_main-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,8105 @@
+/* Intel(R) Gigabit Ethernet Linux driver
+ * Copyright(c) 2007-2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/if_ether.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+#include <linux/pm_runtime.h>
+#ifdef CONFIG_IGB_DCA
+#include <linux/dca.h>
+#endif
+#include <linux/i2c.h>
+#include "igb.h"
+
+#define MAJ 5
+#define MIN 2
+#define BUILD 15
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+__stringify(BUILD) "-k"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+ "Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] =
+ "Copyright (c) 2007-2014 Intel Corporation.";
+
+static const struct e1000_info *igb_info_tbl[] = {
+ [board_82575] = &e1000_82575_info,
+};
+
+static const struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void igb_remove(struct pci_dev *pdev);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure(struct igb_adapter *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_ring *);
+static void igb_set_rx_mode(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *);
+static void igb_setup_dca(struct igb_adapter *);
+#endif /* CONFIG_IGB_DCA */
+static int igb_poll(struct napi_struct *, int);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
+static bool igb_clean_rx_irq(struct igb_q_vector *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_mode(struct net_device *netdev,
+ netdev_features_t features);
+static int igb_vlan_rx_add_vid(struct net_device *, __be16, u16);
+static int igb_vlan_rx_kill_vid(struct net_device *, __be16, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
+static void igb_ping_all_vfs(struct igb_adapter *);
+static void igb_msg_task(struct igb_adapter *);
+static void igb_vmm_control(struct igb_adapter *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+ struct ifla_vf_info *ivi);
+static void igb_check_vf_rate_limit(struct igb_adapter *);
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf);
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs);
+#endif
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *);
+#endif
+static int igb_resume(struct device *);
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_suspend(struct device *dev);
+static int igb_runtime_resume(struct device *dev);
+static int igb_runtime_idle(struct device *dev);
+#endif
+static const struct dev_pm_ops igb_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
+ SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
+ igb_runtime_idle)
+};
+#endif
+static void igb_shutdown(struct pci_dev *);
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
+#ifdef CONFIG_IGB_DCA
+static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+ .notifier_call = igb_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+ pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static const struct pci_error_handlers igb_err_handler = {
+ .error_detected = igb_io_error_detected,
+ .slot_reset = igb_io_slot_reset,
+ .resume = igb_io_resume,
+};
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = igb_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &igb_pm_ops,
+#endif
+ .shutdown = igb_shutdown,
+ .sriov_configure = igb_pci_sriov_configure,
+ .err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+struct igb_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct igb_reg_info igb_reg_info_tbl[] = {
+
+ /* General Registers */
+ {E1000_CTRL, "CTRL"},
+ {E1000_STATUS, "STATUS"},
+ {E1000_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {E1000_ICR, "ICR"},
+
+ /* RX Registers */
+ {E1000_RCTL, "RCTL"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
+ {E1000_RXDCTL(0), "RXDCTL"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {E1000_TCTL, "TCTL"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
+ {E1000_TXDCTL(0), "TXDCTL"},
+ {E1000_TDFH, "TDFH"},
+ {E1000_TDFT, "TDFT"},
+ {E1000_TDFHS, "TDFHS"},
+ {E1000_TDFPC, "TDFPC"},
+
+ /* List Terminator */
+ {}
+};
+
+/* igb_regdump - register printout routine */
+static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
+{
+ int n = 0;
+ char rname[16];
+ u32 regs[8];
+
+ switch (reginfo->ofs) {
+ case E1000_RDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDLEN(n));
+ break;
+ case E1000_RDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDH(n));
+ break;
+ case E1000_RDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDT(n));
+ break;
+ case E1000_RXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RXDCTL(n));
+ break;
+ case E1000_RDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_RDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAH(n));
+ break;
+ case E1000_TDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_TDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDBAH(n));
+ break;
+ case E1000_TDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDLEN(n));
+ break;
+ case E1000_TDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDH(n));
+ break;
+ case E1000_TDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDT(n));
+ break;
+ case E1000_TXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TXDCTL(n));
+ break;
+ default:
+ pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
+ return;
+ }
+
+ snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
+ pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
+ regs[2], regs[3]);
+}
+
+/* igb_dump - Print registers, Tx-rings and Rx-rings */
+static void igb_dump(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_info *reginfo;
+ struct igb_ring *tx_ring;
+ union e1000_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct igb_ring *rx_ring;
+ union e1000_adv_rx_desc *rx_desc;
+ u32 staterr;
+ u16 i, n;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ pr_info("Device Name state trans_start last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ pr_info(" Register Name Value\n");
+ for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ igb_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ struct igb_tx_buffer *buffer_info;
+ tx_ring = adapter->tx_ring[n];
+ buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+ pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 38 36 35 32 31 24 15 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
+ struct igb_tx_buffer *buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ next_desc = " NTC/U";
+ else if (i == tx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == tx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
+ i, le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)dma_unmap_addr(buffer_info, dma),
+ dma_unmap_len(buffer_info, len),
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp,
+ buffer_info->skb, next_desc);
+
+ if (netif_msg_pktdata(adapter) && buffer_info->skb)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1, buffer_info->skb->data,
+ dma_unmap_len(buffer_info, len),
+ true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info(" %5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 17 16 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
+ struct igb_rx_buffer *buffer_info;
+ buffer_info = &rx_ring->rx_buffer_info[i];
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ if (staterr & E1000_RXD_STAT_DD) {
+ /* Descriptor Done */
+ pr_info("%s[0x%03X] %016llX %016llX ---------------- %s\n",
+ "RWB", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ next_desc);
+ } else {
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %s\n",
+ "R ", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)buffer_info->dma,
+ next_desc);
+
+ if (netif_msg_pktdata(adapter) &&
+ buffer_info->dma && buffer_info->page) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ page_address(buffer_info->page) +
+ buffer_info->page_offset,
+ IGB_RX_BUFSZ, true);
+ }
+ }
+ }
+ }
+
+exit:
+ return;
+}
+
+/**
+ * igb_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ **/
+static int igb_get_i2c_data(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_DATA_IN);
+}
+
+/**
+ * igb_set_i2c_data - Sets the I2C data bit
+ * @data: pointer to hardware structure
+ * @state: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ **/
+static void igb_set_i2c_data(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state)
+ i2cctl |= E1000_I2C_DATA_OUT;
+ else
+ i2cctl &= ~E1000_I2C_DATA_OUT;
+
+ i2cctl &= ~E1000_I2C_DATA_OE_N;
+ i2cctl |= E1000_I2C_CLK_OE_N;
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+
+}
+
+/**
+ * igb_set_i2c_clk - Sets the I2C SCL clock
+ * @data: pointer to hardware structure
+ * @state: state to set clock
+ *
+ * Sets the I2C clock line to state
+ **/
+static void igb_set_i2c_clk(void *data, int state)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ if (state) {
+ i2cctl |= E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ } else {
+ i2cctl &= ~E1000_I2C_CLK_OUT;
+ i2cctl &= ~E1000_I2C_CLK_OE_N;
+ }
+ wr32(E1000_I2CPARAMS, i2cctl);
+ wrfl();
+}
+
+/**
+ * igb_get_i2c_clk - Gets the I2C SCL clock state
+ * @data: pointer to hardware structure
+ *
+ * Gets the I2C clock state
+ **/
+static int igb_get_i2c_clk(void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+ return !!(i2cctl & E1000_I2C_CLK_IN);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+ .setsda = igb_set_i2c_data,
+ .setscl = igb_set_i2c_clk,
+ .getsda = igb_get_i2c_data,
+ .getscl = igb_get_i2c_clk,
+ .udelay = 5,
+ .timeout = 20,
+};
+
+/**
+ * igb_get_hw_dev - return device
+ * @hw: pointer to hardware structure
+ *
+ * used by hardware layer to print debugging information
+ **/
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
+{
+ struct igb_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+ int ret;
+
+ pr_info("%s - version %s\n",
+ igb_driver_string, igb_driver_version);
+ pr_info("%s\n", igb_copyright);
+
+#ifdef CONFIG_IGB_DCA
+ dca_register_notify(&dca_notifier);
+#endif
+ ret = pci_register_driver(&igb_driver);
+ return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+#ifdef CONFIG_IGB_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
+ pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
+/**
+ * igb_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void igb_cache_ring_register(struct igb_adapter *adapter)
+{
+ int i = 0, j = 0;
+ u32 rbase_offset = adapter->vfs_allocated_count;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* The queues are allocated for virtualization such that VF 0
+ * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
+ * In order to avoid collision we start at the first free queue
+ * and continue consuming queues in the same sequence
+ */
+ if (adapter->vfs_allocated_count) {
+ for (; i < adapter->rss_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset +
+ Q_IDX_82576(i);
+ }
+ /* Fall through */
+ case e1000_82575:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Fall through */
+ default:
+ for (; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset + i;
+ for (; j < adapter->num_tx_queues; j++)
+ adapter->tx_ring[j]->reg_idx = rbase_offset + j;
+ break;
+ }
+}
+
+u32 igb_rd32(struct e1000_hw *hw, u32 reg)
+{
+ struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
+ u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
+ u32 value = 0;
+
+ if (E1000_REMOVED(hw_addr))
+ return ~value;
+
+ value = readl(&hw_addr[reg]);
+
+ /* reads should not return all F's */
+ if (!(~value) && (!reg || !(~readl(hw_addr)))) {
+ struct net_device *netdev = igb->netdev;
+ hw->hw_addr = NULL;
+ netif_device_detach(netdev);
+ netdev_err(netdev, "PCIe link lost, device now detached\n");
+ }
+
+ return value;
+}
+
+/**
+ * igb_write_ivar - configure ivar for given MSI-X vector
+ * @hw: pointer to the HW structure
+ * @msix_vector: vector number we are allocating to a given ring
+ * @index: row index of IVAR register to write within IVAR table
+ * @offset: column offset of in IVAR, should be multiple of 8
+ *
+ * This function is intended to handle the writing of the IVAR register
+ * for adapters 82576 and newer. The IVAR table consists of 2 columns,
+ * each containing an cause allocation for an Rx and Tx ring, and a
+ * variable number of rows depending on the number of queues supported.
+ **/
+static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
+ int index, int offset)
+{
+ u32 ivar = array_rd32(E1000_IVAR0, index);
+
+ /* clear any bits that are currently set */
+ ivar &= ~((u32)0xFF << offset);
+
+ /* write vector and valid bit */
+ ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
+
+ array_wr32(E1000_IVAR0, index, ivar);
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int rx_queue = IGB_N0_QUEUE;
+ int tx_queue = IGB_N0_QUEUE;
+ u32 msixbm = 0;
+
+ if (q_vector->rx.ring)
+ rx_queue = q_vector->rx.ring->reg_idx;
+ if (q_vector->tx.ring)
+ tx_queue = q_vector->tx.ring->reg_idx;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ /* The 82575 assigns vectors using a bitmask, which matches the
+ * bitmask for the EICR/EIMS/EIMC registers. To assign one
+ * or more queues to a vector, we write the appropriate bits
+ * into the MSIXBM register for that vector.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+ if (tx_queue > IGB_N0_QUEUE)
+ msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) && msix_vector == 0)
+ msixbm |= E1000_EIMS_OTHER;
+ array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+ q_vector->eims_value = msixbm;
+ break;
+ case e1000_82576:
+ /* 82576 uses a table that essentially consists of 2 columns
+ * with 8 rows. The ordering is column-major so we use the
+ * lower 3 bits as the row index, and the 4th bit as the
+ * column offset.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue & 0x7,
+ (rx_queue & 0x8) << 1);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue & 0x7,
+ ((tx_queue & 0x8) << 1) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* On 82580 and newer adapters the scheme is similar to 82576
+ * however instead of ordering column-major we have things
+ * ordered row-major. So we traverse the table by using
+ * bit 0 as the column offset, and the remaining bits as the
+ * row index.
+ */
+ if (rx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ rx_queue >> 1,
+ (rx_queue & 0x1) << 4);
+ if (tx_queue > IGB_N0_QUEUE)
+ igb_write_ivar(hw, msix_vector,
+ tx_queue >> 1,
+ ((tx_queue & 0x1) << 4) + 8);
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ /* add q_vector eims value to global eims_enable_mask */
+ adapter->eims_enable_mask |= q_vector->eims_value;
+
+ /* configure q_vector to set itr on first interrupt */
+ q_vector->set_itr = 1;
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure to initialize
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+ u32 tmp;
+ int i, vector = 0;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->eims_enable_mask = 0;
+
+ /* set vector for other causes, i.e. link changes */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ tmp = rd32(E1000_CTRL_EXT);
+ /* enable MSI-X PBA support*/
+ tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask interrupts upon ICR read. */
+ tmp |= E1000_CTRL_EXT_EIAME;
+ tmp |= E1000_CTRL_EXT_IRCA;
+
+ wr32(E1000_CTRL_EXT, tmp);
+
+ /* enable msix_other interrupt */
+ array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER);
+ adapter->eims_other = E1000_EIMS_OTHER;
+
+ break;
+
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ case e1000_i211:
+ /* Turn on MSI-X capability first, or our settings
+ * won't stick. And it will take days to debug.
+ */
+ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+ E1000_GPIE_PBA | E1000_GPIE_EIAME |
+ E1000_GPIE_NSICR);
+
+ /* enable msix_other interrupt */
+ adapter->eims_other = 1 << vector;
+ tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+ wr32(E1000_IVAR_MISC, tmp);
+ break;
+ default:
+ /* do nothing, since nothing else supports MSI-X */
+ break;
+ } /* switch (hw->mac.type) */
+
+ adapter->eims_enable_mask |= adapter->eims_other;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ igb_assign_vector(adapter->q_vector[i], vector++);
+
+ wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ * @adapter: board private structure to initialize
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int i, err = 0, vector = 0, free_vector = 0;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_other, 0, netdev->name, adapter);
+ if (err)
+ goto err_out;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+ vector++;
+
+ q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+ if (q_vector->rx.ring && q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else if (q_vector->tx.ring)
+ sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+ q_vector->tx.ring->queue_index);
+ else if (q_vector->rx.ring)
+ sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+ q_vector->rx.ring->queue_index);
+ else
+ sprintf(q_vector->name, "%s-unused", netdev->name);
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_ring, 0, q_vector->name,
+ q_vector);
+ if (err)
+ goto err_free;
+ }
+
+ igb_configure_msix(adapter);
+ return 0;
+
+err_free:
+ /* free already assigned IRQs */
+ free_irq(adapter->msix_entries[free_vector++].vector, adapter);
+
+ vector--;
+ for (i = 0; i < vector; i++) {
+ free_irq(adapter->msix_entries[free_vector++].vector,
+ adapter->q_vector[i]);
+ }
+err_out:
+ return err;
+}
+
+/**
+ * igb_free_q_vector - Free memory allocated for specific interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be freed
+ *
+ * This function frees the memory allocated to the q_vector.
+ **/
+static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ adapter->q_vector[v_idx] = NULL;
+
+ /* igb_get_stats64() might access the rings on this vector,
+ * we must wait a grace period before freeing it.
+ */
+ if (q_vector)
+ kfree_rcu(q_vector, rcu);
+}
+
+/**
+ * igb_reset_q_vector - Reset config for interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_idx: Index of vector to be reset
+ *
+ * If NAPI is enabled it will delete any references to the
+ * NAPI struct. This is preparation for igb_free_q_vector.
+ **/
+static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ /* Coming from igb_set_interrupt_capability, the vectors are not yet
+ * allocated. So, q_vector is NULL so we should stop here.
+ */
+ if (!q_vector)
+ return;
+
+ if (q_vector->tx.ring)
+ adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
+
+ if (q_vector->rx.ring)
+ adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL;
+
+ netif_napi_del(&q_vector->napi);
+
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ pci_disable_msix(adapter->pdev);
+ else if (adapter->flags & IGB_FLAG_HAS_MSI)
+ pci_disable_msi(adapter->pdev);
+
+ while (v_idx--)
+ igb_reset_q_vector(adapter, v_idx);
+}
+
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+ int v_idx = adapter->num_q_vectors;
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--) {
+ igb_reset_q_vector(adapter, v_idx);
+ igb_free_q_vector(adapter, v_idx);
+ }
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ * @adapter: board private structure to initialize
+ *
+ * This function resets the device so that it has 0 Rx queues, Tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+ igb_free_q_vectors(adapter);
+ igb_reset_interrupt_capability(adapter);
+}
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
+{
+ int err;
+ int numvecs, i;
+
+ if (!msix)
+ goto msi_only;
+ adapter->flags |= IGB_FLAG_HAS_MSIX;
+
+ /* Number of supported queues. */
+ adapter->num_rx_queues = adapter->rss_queues;
+ if (adapter->vfs_allocated_count)
+ adapter->num_tx_queues = 1;
+ else
+ adapter->num_tx_queues = adapter->rss_queues;
+
+ /* start with one vector for every Rx queue */
+ numvecs = adapter->num_rx_queues;
+
+ /* if Tx handler is separate add 1 for every Tx queue */
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
+
+ /* store the number of vectors reserved for queues */
+ adapter->num_q_vectors = numvecs;
+
+ /* add 1 vector for link status interrupts */
+ numvecs++;
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix_range(adapter->pdev,
+ adapter->msix_entries,
+ numvecs,
+ numvecs);
+ if (err > 0)
+ return;
+
+ igb_reset_interrupt_capability(adapter);
+
+ /* If we can't do MSI-X, try MSI */
+msi_only:
+ adapter->flags &= ~IGB_FLAG_HAS_MSIX;
+#ifdef CONFIG_PCI_IOV
+ /* disable SR-IOV for non MSI-X configurations */
+ if (adapter->vf_data) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+ }
+#endif
+ adapter->vfs_allocated_count = 0;
+ adapter->rss_queues = 1;
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_q_vectors = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGB_FLAG_HAS_MSI;
+}
+
+static void igb_add_ring(struct igb_ring *ring,
+ struct igb_ring_container *head)
+{
+ head->ring = ring;
+ head->count++;
+}
+
+/**
+ * igb_alloc_q_vector - Allocate memory for a single interrupt vector
+ * @adapter: board private structure to initialize
+ * @v_count: q_vectors allocated on adapter, used for ring interleaving
+ * @v_idx: index of vector in adapter struct
+ * @txr_count: total number of Tx rings to allocate
+ * @txr_idx: index of first Tx ring to allocate
+ * @rxr_count: total number of Rx rings to allocate
+ * @rxr_idx: index of first Rx ring to allocate
+ *
+ * We allocate one q_vector. If allocation fails we return -ENOMEM.
+ **/
+static int igb_alloc_q_vector(struct igb_adapter *adapter,
+ int v_count, int v_idx,
+ int txr_count, int txr_idx,
+ int rxr_count, int rxr_idx)
+{
+ struct igb_q_vector *q_vector;
+ struct igb_ring *ring;
+ int ring_count, size;
+
+ /* igb only supports 1 Tx and/or 1 Rx queue per vector */
+ if (txr_count > 1 || rxr_count > 1)
+ return -ENOMEM;
+
+ ring_count = txr_count + rxr_count;
+ size = sizeof(struct igb_q_vector) +
+ (sizeof(struct igb_ring) * ring_count);
+
+ /* allocate q_vector and rings */
+ q_vector = adapter->q_vector[v_idx];
+ if (!q_vector)
+ q_vector = kzalloc(size, GFP_KERNEL);
+ if (!q_vector)
+ return -ENOMEM;
+
+ /* initialize NAPI */
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ igb_poll, 64);
+
+ /* tie q_vector and adapter together */
+ adapter->q_vector[v_idx] = q_vector;
+ q_vector->adapter = adapter;
+
+ /* initialize work limits */
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+
+ /* initialize ITR configuration */
+ q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0);
+ q_vector->itr_val = IGB_START_ITR;
+
+ /* initialize pointer to rings */
+ ring = q_vector->ring;
+
+ /* intialize ITR */
+ if (rxr_count) {
+ /* rx or rx/tx vector */
+ if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ } else {
+ /* tx only vector */
+ if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
+ q_vector->itr_val = adapter->tx_itr_setting;
+ }
+
+ if (txr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Tx values */
+ igb_add_ring(ring, &q_vector->tx);
+
+ /* For 82575, context index must be unique per ring. */
+ if (adapter->hw.mac.type == e1000_82575)
+ set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
+
+ /* apply Tx specific ring traits */
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = txr_idx;
+
+ u64_stats_init(&ring->tx_syncp);
+ u64_stats_init(&ring->tx_syncp2);
+
+ /* assign ring to adapter */
+ adapter->tx_ring[txr_idx] = ring;
+
+ /* push pointer to next ring */
+ ring++;
+ }
+
+ if (rxr_count) {
+ /* assign generic ring traits */
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ /* configure backlink on ring */
+ ring->q_vector = q_vector;
+
+ /* update q_vector Rx values */
+ igb_add_ring(ring, &q_vector->rx);
+
+ /* set flag indicating ring supports SCTP checksum offload */
+ if (adapter->hw.mac.type >= e1000_82576)
+ set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
+
+ /* On i350, i354, i210, and i211, loopback VLAN packets
+ * have the tag byte-swapped.
+ */
+ if (adapter->hw.mac.type >= e1000_i350)
+ set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
+
+ /* apply Rx specific ring traits */
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rxr_idx;
+
+ u64_stats_init(&ring->rx_syncp);
+
+ /* assign ring to adapter */
+ adapter->rx_ring[rxr_idx] = ring;
+ }
+
+ return 0;
+}
+
+
+/**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+ int q_vectors = adapter->num_q_vectors;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int rxr_idx = 0, txr_idx = 0, v_idx = 0;
+ int err;
+
+ if (q_vectors >= (rxr_remaining + txr_remaining)) {
+ for (; rxr_remaining; v_idx++) {
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ 0, 0, 1, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining--;
+ rxr_idx++;
+ }
+ }
+
+ for (; v_idx < q_vectors; v_idx++) {
+ int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
+ int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
+
+ err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
+ tqpv, txr_idx, rqpv, rxr_idx);
+
+ if (err)
+ goto err_out;
+
+ /* update counts and index */
+ rxr_remaining -= rqpv;
+ txr_remaining -= tqpv;
+ rxr_idx++;
+ txr_idx++;
+ }
+
+ return 0;
+
+err_out:
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+ adapter->num_q_vectors = 0;
+
+ while (v_idx--)
+ igb_free_q_vector(adapter, v_idx);
+
+ return -ENOMEM;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ * @adapter: board private structure to initialize
+ * @msix: boolean value of MSIX capability
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ igb_set_interrupt_capability(adapter, msix);
+
+ err = igb_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ igb_cache_ring_register(adapter);
+
+ return 0;
+
+err_alloc_q_vectors:
+ igb_reset_interrupt_capability(adapter);
+ return err;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ * @adapter: board private structure to initialize
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ err = igb_request_msix(adapter);
+ if (!err)
+ goto request_done;
+ /* fall back to MSI */
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+ err = igb_init_interrupt_scheme(adapter, false);
+ if (err)
+ goto request_done;
+
+ igb_setup_all_tx_resources(adapter);
+ igb_setup_all_rx_resources(adapter);
+ igb_configure(adapter);
+ }
+
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ err = request_irq(pdev->irq, igb_intr_msi, 0,
+ netdev->name, adapter);
+ if (!err)
+ goto request_done;
+
+ /* fall back to legacy interrupts */
+ igb_reset_interrupt_capability(adapter);
+ adapter->flags &= ~IGB_FLAG_HAS_MSI;
+ }
+
+ err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
+ netdev->name, adapter);
+
+ if (err)
+ dev_err(&pdev->dev, "Error %d getting interrupt\n",
+ err);
+
+request_done:
+ return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int vector = 0, i;
+
+ free_irq(adapter->msix_entries[vector++].vector, adapter);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ free_irq(adapter->msix_entries[vector++].vector,
+ adapter->q_vector[i]);
+ } else {
+ free_irq(adapter->pdev->irq, adapter);
+ }
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* we need to be careful when disabling interrupts. The VFs are also
+ * mapped into these registers and so clearing the bits can cause
+ * issues on the VF drivers so we only need to clear what we set
+ */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 regval = rd32(E1000_EIAM);
+
+ wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+ wr32(E1000_EIMC, adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
+ }
+
+ wr32(E1000_IAM, 0);
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
+ u32 regval = rd32(E1000_EIAC);
+
+ wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
+ wr32(E1000_EIMS, adapter->eims_enable_mask);
+ if (adapter->vfs_allocated_count) {
+ wr32(E1000_MBVFIMR, 0xFF);
+ ims |= E1000_IMS_VMMB;
+ }
+ wr32(E1000_IMS, ims);
+ } else {
+ wr32(E1000_IMS, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ wr32(E1000_IAM, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ }
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !test_bit(old_vid, adapter->active_vlans)) {
+ /* remove VID from filter table */
+ igb_vfta_set(hw, old_vid, false);
+ }
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ igb_get_hw_control(adapter);
+ igb_set_rx_mode(netdev);
+
+ igb_restore_vlan(adapter);
+
+ igb_setup_tctl(adapter);
+ igb_setup_mrqc(adapter);
+ igb_setup_rctl(adapter);
+
+ igb_configure_tx(adapter);
+ igb_configure_rx(adapter);
+
+ igb_rx_fifo_flush_82575(&adapter->hw);
+
+ /* call igb_desc_unused which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
+ }
+}
+
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+ igb_reset_phy(&adapter->hw);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_up_phy_copper(&adapter->hw);
+ else
+ igb_power_up_serdes_link_82575(&adapter->hw);
+
+ igb_setup_link(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_down_phy_copper_82575(&adapter->hw);
+ else
+ igb_shutdown_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * Detect and switch function for Media Auto Sense
+ * @adapter: address of the board private structure
+ **/
+static void igb_check_swap_media(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext, connsw;
+ bool swap_now = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ connsw = rd32(E1000_CONNSW);
+
+ /* need to live swap if current media is copper and we have fiber/serdes
+ * to go to.
+ */
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
+ swap_now = true;
+ } else if (!(connsw & E1000_CONNSW_SERDESD)) {
+ /* copper signal takes time to appear */
+ if (adapter->copper_tries < 4) {
+ adapter->copper_tries++;
+ connsw |= E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ return;
+ } else {
+ adapter->copper_tries = 0;
+ if ((connsw & E1000_CONNSW_PHYSD) &&
+ (!(connsw & E1000_CONNSW_PHY_PDN))) {
+ swap_now = true;
+ connsw &= ~E1000_CONNSW_AUTOSENSE_CONF;
+ wr32(E1000_CONNSW, connsw);
+ }
+ }
+ }
+
+ if (!swap_now)
+ return;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to fiber/serdes\n");
+ ctrl_ext |=
+ E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ adapter->copper_tries = 0;
+ break;
+ case e1000_media_type_internal_serdes:
+ case e1000_media_type_fiber:
+ netdev_info(adapter->netdev,
+ "MAS: changing media to copper\n");
+ ctrl_ext &=
+ ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ break;
+ default:
+ /* shouldn't get here during regular operation */
+ netdev_err(adapter->netdev,
+ "AMS: Invalid media type found, returning\n");
+ break;
+ }
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+}
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+int igb_up(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+ igb_configure(adapter);
+
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ igb_configure_msix(adapter);
+ else
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(adapter->netdev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (!hw->dev_spec._82575.eee_disable))
+ adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
+ return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, rctl;
+ int i;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_tx_stop_all_queues(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ wr32(E1000_TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ wrfl();
+ usleep_range(10000, 11000);
+
+ igb_irq_disable(adapter);
+
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ if (adapter->q_vector[i]) {
+ napi_synchronize(&adapter->q_vector[i]->napi);
+ napi_disable(&adapter->q_vector[i]->napi);
+ }
+ }
+
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netif_carrier_off(netdev);
+
+ /* record the stats before reset*/
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ if (!pci_channel_offline(adapter->pdev))
+ igb_reset(adapter);
+ igb_clean_all_tx_rings(adapter);
+ igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+ /* since we reset the hardware DCA settings were cleared */
+ igb_setup_dca(adapter);
+#endif
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ igb_down(adapter);
+ igb_up(adapter);
+ clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+/** igb_enable_mas - Media Autosense re-enable after swap
+ *
+ * @adapter: adapter struct
+ **/
+static s32 igb_enable_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 connsw;
+ s32 ret_val = 0;
+
+ connsw = rd32(E1000_CONNSW);
+ if (!(hw->phy.media_type == e1000_media_type_copper))
+ return ret_val;
+
+ /* configure for SerDes media detect */
+ if (!(connsw & E1000_CONNSW_SERDESD)) {
+ connsw |= E1000_CONNSW_ENRGSRC;
+ connsw |= E1000_CONNSW_AUTOSENSE_EN;
+ wr32(E1000_CONNSW, connsw);
+ wrfl();
+ } else if (connsw & E1000_CONNSW_SERDESD) {
+ /* already SerDes, no need to enable anything */
+ return ret_val;
+ } else {
+ netdev_info(adapter->netdev,
+ "MAS: Unable to configure feature, disabling..\n");
+ adapter->flags &= ~IGB_FLAG_MAS_ENABLE;
+ }
+ return ret_val;
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_fc_info *fc = &hw->fc;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_82580:
+ pba = rd32(E1000_RXPBS);
+ pba = igb_rxpbs_adjust_82580(pba);
+ break;
+ case e1000_82576:
+ pba = rd32(E1000_RXPBS);
+ pba &= E1000_RXPBS_SIZE_MASK_82576;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ default:
+ pba = E1000_PBA_34K;
+ break;
+ }
+
+ if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ (mac->type < e1000_82576)) {
+ /* adjust PBA for jumbo frames */
+ wr32(E1000_PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB.
+ */
+ pba = rd32(E1000_PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* the Tx fifo also stores 16 bytes of information about the Tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(union e1000_adv_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation
+ */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* if short on Rx space, Rx wins and must trump Tx
+ * adjustment
+ */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ wr32(E1000_PBA, pba);
+ }
+
+ /* flow control settings */
+ /* The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - 2 * adapter->max_frame_size));
+
+ fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
+ fc->pause_time = 0xFFFF;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ /* disable receive for all VFs and wait one second */
+ if (adapter->vfs_allocated_count) {
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++)
+ adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
+
+ /* ping all the active vfs to let them know we are going down */
+ igb_ping_all_vfs(adapter);
+
+ /* disable transmits and receives */
+ wr32(E1000_VFRE, 0);
+ wr32(E1000_VFTE, 0);
+ }
+
+ /* Allow time for pending master requests to run */
+ hw->mac.ops.reset_hw(hw);
+ wr32(E1000_WUC, 0);
+
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ /* need to resetup here after media swap */
+ adapter->ei.get_invariants(hw);
+ adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
+ }
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (igb_enable_mas(adapter))
+ dev_err(&pdev->dev,
+ "Error enabling Media Auto Sense\n");
+ }
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&pdev->dev, "Hardware Error\n");
+
+ /* Flow control settings reset on hardware reset, so guarantee flow
+ * control is off when forcing speed.
+ */
+ if (!hw->mac.autoneg)
+ igb_force_mac_fc(hw);
+
+ igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+ /* Re-initialize the thermal sensor on i350 devices. */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (mac->type == e1000_i350 && hw->bus.func == 0) {
+ /* If present, re-initialize the external thermal sensor
+ * interface.
+ */
+ if (adapter->ets)
+ mac->ops.init_thermal_sensor_thresh(hw);
+ }
+ }
+#endif
+ /* Re-establish EEE setting */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ igb_set_eee_i350(hw, true, true);
+ break;
+ case e1000_i354:
+ igb_set_eee_i354(hw, true, true);
+ break;
+ default:
+ break;
+ }
+ }
+ if (!netif_running(adapter->netdev))
+ igb_power_down_link(adapter);
+
+ igb_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ /* Re-enable PTP, where applicable. */
+ igb_ptp_reset(adapter);
+
+ igb_get_phy_info(hw);
+}
+
+static netdev_features_t igb_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ /* Since there is no support for separate Rx/Tx vlan accel
+ * enable/disable make sure Tx flag is always in same state as Rx.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
+ return features;
+}
+
+static int igb_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ netdev_features_t changed = netdev->features ^ features;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
+ igb_vlan_mode(netdev, features);
+
+ if (!(changed & NETIF_F_RXALL))
+ return 0;
+
+ netdev->features = features;
+
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ else
+ igb_reset(adapter);
+
+ return 0;
+}
+
+static const struct net_device_ops igb_netdev_ops = {
+ .ndo_open = igb_open,
+ .ndo_stop = igb_close,
+ .ndo_start_xmit = igb_xmit_frame,
+ .ndo_get_stats64 = igb_get_stats64,
+ .ndo_set_rx_mode = igb_set_rx_mode,
+ .ndo_set_mac_address = igb_set_mac,
+ .ndo_change_mtu = igb_change_mtu,
+ .ndo_do_ioctl = igb_ioctl,
+ .ndo_tx_timeout = igb_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
+ .ndo_set_vf_mac = igb_ndo_set_vf_mac,
+ .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
+ .ndo_set_vf_rate = igb_ndo_set_vf_bw,
+ .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk,
+ .ndo_get_vf_config = igb_ndo_get_vf_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igb_netpoll,
+#endif
+ .ndo_fix_features = igb_fix_features,
+ .ndo_set_features = igb_set_features,
+};
+
+/**
+ * igb_set_fw_version - Configure version string for ethtool
+ * @adapter: adapter struct
+ **/
+void igb_set_fw_version(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_fw_version fw;
+
+ igb_get_fw_version(hw, &fw);
+
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (!(igb_get_flash_presence_i210(hw))) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%2d.%2d-%d",
+ fw.invm_major, fw.invm_minor,
+ fw.invm_img_type);
+ break;
+ }
+ /* fall through */
+ default:
+ /* if option is rom valid, display its version too */
+ if (fw.or_valid) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x, %d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.etrack_id,
+ fw.or_major, fw.or_build, fw.or_patch);
+ /* no option rom */
+ } else if (fw.etrack_id != 0X0000) {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d, 0x%08x",
+ fw.eep_major, fw.eep_minor, fw.etrack_id);
+ } else {
+ snprintf(adapter->fw_version,
+ sizeof(adapter->fw_version),
+ "%d.%d.%d",
+ fw.eep_major, fw.eep_minor, fw.eep_build);
+ }
+ break;
+ }
+}
+
+/**
+ * igb_init_mas - init Media Autosense feature if enabled in the NVM
+ *
+ * @adapter: adapter struct
+ **/
+static void igb_init_mas(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 eeprom_data;
+
+ hw->nvm.ops.read(hw, NVM_COMPAT, 1, &eeprom_data);
+ switch (hw->bus.func) {
+ case E1000_FUNC_0:
+ if (eeprom_data & IGB_MAS_ENABLE_0) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_1:
+ if (eeprom_data & IGB_MAS_ENABLE_1) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_2:
+ if (eeprom_data & IGB_MAS_ENABLE_2) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ case E1000_FUNC_3:
+ if (eeprom_data & IGB_MAS_ENABLE_3) {
+ adapter->flags |= IGB_FLAG_MAS_ENABLE;
+ netdev_info(adapter->netdev,
+ "MAS: Enabling Media Autosense for port %d\n",
+ hw->bus.func);
+ }
+ break;
+ default:
+ /* Shouldn't get here */
+ netdev_err(adapter->netdev,
+ "MAS: Invalid port configuration, returning\n");
+ break;
+ }
+}
+
+/**
+ * igb_init_i2c - Init I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+ s32 status = 0;
+
+ /* I2C interface supported on i350 devices */
+ if (adapter->hw.mac.type != e1000_i350)
+ return 0;
+
+ /* Initialize the i2c bus which is controlled by the registers.
+ * This bus will use the i2c_algo_bit structue that implements
+ * the protocol through toggling of the 4 bits in the register.
+ */
+ adapter->i2c_adap.owner = THIS_MODULE;
+ adapter->i2c_algo = igb_i2c_algo;
+ adapter->i2c_algo.data = adapter;
+ adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+ adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+ strlcpy(adapter->i2c_adap.name, "igb BB",
+ sizeof(adapter->i2c_adap.name));
+ status = i2c_bit_add_bus(&adapter->i2c_adap);
+ return status;
+}
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igb_adapter *adapter;
+ struct e1000_hw *hw;
+ u16 eeprom_data = 0;
+ s32 ret_val;
+ static int global_quad_port_a; /* global quad port a indication */
+ const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+ int err, pci_using_dac;
+ u8 part_str[E1000_PBANUM_LENGTH];
+
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+
+ err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM),
+ igb_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
+ IGB_MAX_TX_QUEUES);
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ err = -EIO;
+ hw->hw_addr = pci_iomap(pdev, 0, 0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ netdev->netdev_ops = &igb_netdev_ops;
+ igb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = pci_resource_start(pdev, 0);
+ netdev->mem_end = pci_resource_end(pdev, 0);
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* Copy the default MAC, PHY and NVM function pointers */
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ /* Initialize skew-specific constants */
+ err = ei->get_invariants(hw);
+ if (err)
+ goto err_sw_init;
+
+ /* setup the private structure */
+ err = igb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ igb_get_bus_info_pcie(hw);
+
+ hw->phy.autoneg_wait_to_complete = false;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = AUTO_ALL_MODES;
+ hw->phy.disable_polarity_correction = false;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (igb_check_reset_block(hw))
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
+
+ /* features is initialized to 0 in allocation, it might have bits
+ * set by igb_sw_init so we should use an or instead of an
+ * assignment.
+ */
+ netdev->features |= NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_TX;
+
+ /* copy netdev features into list of user selectable features */
+ netdev->hw_features |= netdev->features;
+ netdev->hw_features |= NETIF_F_RXALL;
+
+ /* set this bit last since it cannot be part of hw_features */
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ netdev->vlan_features |= NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_SG;
+
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (hw->mac.type >= e1000_82576) {
+ netdev->hw_features |= NETIF_F_SCTP_CSUM;
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ }
+
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
+
+ /* before reading the NVM, reset the controller to put the device in a
+ * known good starting state
+ */
+ hw->mac.ops.reset_hw(hw);
+
+ /* make sure the NVM is good , i211/i210 parts can have special NVM
+ * that doesn't contain a checksum
+ */
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ if (igb_get_flash_presence_i210(hw)) {
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev,
+ "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ }
+ break;
+ default:
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ break;
+ }
+
+ /* copy the MAC address out of the NVM */
+ if (hw->mac.ops.read_mac_addr(hw))
+ dev_err(&pdev->dev, "NVM Read Error\n");
+
+ memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* get firmware version for ethtool -i */
+ igb_set_fw_version(adapter);
+
+ /* configure RXPBSIZE and TXPBSIZE */
+ if (hw->mac.type == e1000_i210) {
+ wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
+ wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
+ }
+
+ setup_timer(&adapter->watchdog_timer, igb_watchdog,
+ (unsigned long) adapter);
+ setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igb_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+ /* Initialize link properties that are user-changeable */
+ adapter->fc_autoneg = true;
+ hw->mac.autoneg = true;
+ hw->phy.autoneg_advertised = 0x2f;
+
+ hw->fc.requested_mode = e1000_fc_default;
+ hw->fc.current_mode = e1000_fc_default;
+
+ igb_validate_mdi_setting(hw);
+
+ /* By default, support wake on port A */
+ if (hw->bus.func == 0)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* Check the NVM for wake support on non-port A ports */
+ if (hw->mac.type >= e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
+ else if (hw->bus.func == 1)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+ if (eeprom_data & IGB_EEPROM_APME)
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+
+ /* now that we have the eeprom settings, apply the special cases where
+ * the eeprom may be wrong or the board simply won't support wake on
+ * lan on a particular port
+ */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting
+ */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ break;
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ else
+ adapter->flags |= IGB_FLAG_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ /* If the device can't wake, don't set software support */
+ if (!device_can_wakeup(&adapter->pdev->dev))
+ adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ if (adapter->flags & IGB_FLAG_WOL_SUPPORTED)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ /* Some vendors want WoL disabled by default, but still supported */
+ if ((hw->mac.type == e1000_i350) &&
+ (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
+ adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
+ adapter->wol = 0;
+ }
+
+ device_set_wakeup_enable(&adapter->pdev->dev,
+ adapter->flags & IGB_FLAG_WOL_SUPPORTED);
+
+ /* reset the hardware with the new settings */
+ igb_reset(adapter);
+
+ /* Init the I2C interface */
+ err = igb_init_i2c(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "failed to init i2c interface\n");
+ goto err_eeprom;
+ }
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+#ifdef CONFIG_IGB_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ }
+
+#endif
+#ifdef CONFIG_IGB_HWMON
+ /* Initialize the thermal sensor on i350 devices. */
+ if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+ u16 ets_word;
+
+ /* Read the NVM to determine if this i350 device supports an
+ * external thermal sensor.
+ */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+ if (ets_word != 0x0000 && ets_word != 0xFFFF)
+ adapter->ets = true;
+ else
+ adapter->ets = false;
+ if (igb_sysfs_init(adapter))
+ dev_err(&pdev->dev,
+ "failed to allocate sysfs resources\n");
+ } else {
+ adapter->ets = false;
+ }
+#endif
+ /* Check if Media Autosense is enabled */
+ adapter->ei = *ei;
+ if (hw->dev_spec._82575.mas_capable)
+ igb_init_mas(adapter);
+
+ /* do hw tstamp init after resetting */
+ igb_ptp_init(adapter);
+
+ dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+ /* print bus type/speed/width info, not applicable to i354 */
+ if (hw->mac.type != e1000_i354) {
+ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+ netdev->name,
+ ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+ "unknown"),
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ?
+ "Width x4" :
+ (hw->bus.width == e1000_bus_width_pcie_x2) ?
+ "Width x2" :
+ (hw->bus.width == e1000_bus_width_pcie_x1) ?
+ "Width x1" : "unknown"), netdev->dev_addr);
+ }
+
+ if ((hw->mac.type >= e1000_i210 ||
+ igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_read_part_string(hw, part_str,
+ E1000_PBANUM_LENGTH);
+ } else {
+ ret_val = -E1000_ERR_INVM_VALUE_NOT_FOUND;
+ }
+
+ if (ret_val)
+ strcpy(part_str, "Unknown");
+ dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
+ dev_info(&pdev->dev,
+ "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+ (adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
+ (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ switch (hw->mac.type) {
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ /* Enable EEE for internal copper PHY devices */
+ err = igb_set_eee_i350(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ break;
+ case e1000_i354:
+ if ((rd32(E1000_CTRL_EXT) &
+ E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+ err = igb_set_eee_i354(hw, true, true);
+ if ((!err) &&
+ (!hw->dev_spec._82575.eee_disable)) {
+ adapter->eee_advert =
+ MDIO_EEE_100TX | MDIO_EEE_1000T;
+ adapter->flags |= IGB_FLAG_EEE;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ pm_runtime_put_noidle(&pdev->dev);
+ return 0;
+
+err_register:
+ igb_release_hw_control(adapter);
+ memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
+err_eeprom:
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_sw_init:
+ igb_clear_interrupt_scheme(adapter);
+ pci_iounmap(pdev, hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_disable_sriov(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* reclaim resources allocated to VFs */
+ if (adapter->vf_data) {
+ /* disable iov and allow time for transactions to clear */
+ if (pci_vfs_assigned(pdev)) {
+ dev_warn(&pdev->dev,
+ "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
+ return -EPERM;
+ } else {
+ pci_disable_sriov(pdev);
+ msleep(500);
+ }
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&pdev->dev, "IOV Disabled\n");
+
+ /* Re-enable DMA Coalescing flag since IOV is turned off */
+ adapter->flags |= IGB_FLAG_DMAC;
+ }
+
+ return 0;
+}
+
+static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int old_vfs = pci_num_vf(pdev);
+ int err = 0;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_HAS_MSIX) || num_vfs > 7) {
+ err = -EPERM;
+ goto out;
+ }
+ if (!num_vfs)
+ goto out;
+
+ if (old_vfs) {
+ dev_info(&pdev->dev, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
+ old_vfs, max_vfs);
+ adapter->vfs_allocated_count = old_vfs;
+ } else
+ adapter->vfs_allocated_count = num_vfs;
+
+ adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+ sizeof(struct vf_data_storage), GFP_KERNEL);
+
+ /* if allocation failed then we do not support SR-IOV */
+ if (!adapter->vf_data) {
+ adapter->vfs_allocated_count = 0;
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for VF Data Storage\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* only call pci_enable_sriov() if no VFs are allocated already */
+ if (!old_vfs) {
+ err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "%d VFs allocated\n",
+ adapter->vfs_allocated_count);
+ for (i = 0; i < adapter->vfs_allocated_count; i++)
+ igb_vf_configure(adapter, i);
+
+ /* DMA Coalescing is not supported in IOV mode. */
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ goto out;
+
+err_out:
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ adapter->vfs_allocated_count = 0;
+out:
+ return err;
+}
+
+#endif
+/**
+ * igb_remove_i2c - Cleanup I2C interface
+ * @adapter: pointer to adapter structure
+ **/
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+ /* free the adapter bus structure */
+ i2c_del_adapter(&adapter->i2c_adap);
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void igb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+#endif
+ igb_remove_i2c(adapter);
+ igb_ptp_stop(adapter);
+ /* The watchdog timer may be rescheduled, so explicitly
+ * disable watchdog from being rescheduled.
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+#ifdef CONFIG_IGB_DCA
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ dev_info(&pdev->dev, "DCA disabled\n");
+ dca_remove_requester(&pdev->dev);
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+#endif
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PCI_IOV
+ igb_disable_sriov(pdev);
+#endif
+
+ pci_iounmap(pdev, hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ kfree(adapter->shadow_vfta);
+ free_netdev(netdev);
+
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs. The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void igb_probe_vfs(struct igb_adapter *adapter)
+{
+#ifdef CONFIG_PCI_IOV
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Virtualization features not supported on i210 family. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
+ return;
+
+ pci_sriov_set_totalvfs(pdev, 7);
+ igb_pci_enable_sriov(pdev, max_vfs);
+
+#endif /* CONFIG_PCI_IOV */
+}
+
+static void igb_init_queue_configuration(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 max_rss_queues;
+
+ /* Determine the maximum number of RSS queues supported. */
+ switch (hw->mac.type) {
+ case e1000_i211:
+ max_rss_queues = IGB_MAX_RX_QUEUES_I211;
+ break;
+ case e1000_82575:
+ case e1000_i210:
+ max_rss_queues = IGB_MAX_RX_QUEUES_82575;
+ break;
+ case e1000_i350:
+ /* I350 cannot do RSS and SR-IOV at the same time */
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 1;
+ break;
+ }
+ /* fall through */
+ case e1000_82576:
+ if (!!adapter->vfs_allocated_count) {
+ max_rss_queues = 2;
+ break;
+ }
+ /* fall through */
+ case e1000_82580:
+ case e1000_i354:
+ default:
+ max_rss_queues = IGB_MAX_RX_QUEUES;
+ break;
+ }
+
+ adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
+
+ /* Determine if we need to pair queues. */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i211:
+ /* Device supports enough interrupts without queue pairing. */
+ break;
+ case e1000_82576:
+ /* If VFs are going to be allocated with RSS queues then we
+ * should pair the queues in order to conserve interrupts due
+ * to limited supply.
+ */
+ if ((adapter->rss_queues > 1) &&
+ (adapter->vfs_allocated_count > 6))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ /* fall through */
+ case e1000_82580:
+ case e1000_i350:
+ case e1000_i354:
+ case e1000_i210:
+ default:
+ /* If rss_queues > half of max_rss_queues, pair the queues in
+ * order to conserve interrupts due to limited supply.
+ */
+ if (adapter->rss_queues > (max_rss_queues / 2))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ break;
+ }
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IGB_DEFAULT_TXD;
+ adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+ /* set default ITR values */
+ adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+ /* set default work limits */
+ adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+ VLAN_HLEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (max_vfs > 7) {
+ dev_warn(&pdev->dev,
+ "Maximum of 7 VFs per PF, using max\n");
+ max_vfs = adapter->vfs_allocated_count = 7;
+ } else
+ adapter->vfs_allocated_count = max_vfs;
+ if (adapter->vfs_allocated_count)
+ dev_warn(&pdev->dev,
+ "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
+ break;
+ default:
+ break;
+ }
+#endif /* CONFIG_PCI_IOV */
+
+ igb_init_queue_configuration(adapter);
+
+ /* Setup and initialize a copy of the hw vlan table array */
+ adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
+ GFP_ATOMIC);
+
+ /* This call may decrease the number of queues */
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_probe_vfs(adapter);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igb_irq_disable(adapter);
+
+ if (hw->mac.type >= e1000_i350)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+
+ set_bit(__IGB_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int __igb_open(struct net_device *netdev, bool resuming)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+ int i;
+
+ /* disallow open during test */
+ if (test_bit(__IGB_TESTING, &adapter->state)) {
+ WARN_ON(resuming);
+ return -EBUSY;
+ }
+
+ if (!resuming)
+ pm_runtime_get_sync(&pdev->dev);
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = igb_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igb_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ igb_power_up_link(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ igb_configure(adapter);
+
+ err = igb_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* Notify the stack of the actual queue counts. */
+ err = netif_set_real_num_tx_queues(adapter->netdev,
+ adapter->num_tx_queues);
+ if (err)
+ goto err_set_queues;
+
+ err = netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+ if (err)
+ goto err_set_queues;
+
+ /* From here on the code is the same as igb_up() */
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ napi_enable(&(adapter->q_vector[i]->napi));
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(netdev);
+
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ return 0;
+
+err_set_queues:
+ igb_free_irq(adapter);
+err_req_irq:
+ igb_release_hw_control(adapter);
+ igb_power_down_link(adapter);
+ igb_free_all_rx_resources(adapter);
+err_setup_rx:
+ igb_free_all_tx_resources(adapter);
+err_setup_tx:
+ igb_reset(adapter);
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
+ return err;
+}
+
+static int igb_open(struct net_device *netdev)
+{
+ return __igb_open(netdev, false);
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the driver's control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int __igb_close(struct net_device *netdev, bool suspending)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+
+ if (!suspending)
+ pm_runtime_get_sync(&pdev->dev);
+
+ igb_down(adapter);
+ igb_free_irq(adapter);
+
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ if (!suspending)
+ pm_runtime_put_sync(&pdev->dev);
+ return 0;
+}
+
+static int igb_close(struct net_device *netdev)
+{
+ return __igb_close(netdev, false);
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+
+ tx_ring->tx_buffer_info = vzalloc(size);
+ if (!tx_ring->tx_buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+
+err:
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = igb_setup_tx_resources(adapter->tx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_tx_resources(adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl;
+
+ /* disable queue 0 which is enabled by default on 82575 and 82576 */
+ wr32(E1000_TXDCTL(0), 0);
+
+ /* Program the Transmit Control Register */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igb_config_collision_dist(hw);
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+
+ wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txdctl = 0;
+ u64 tdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+
+ /* disable the queue */
+ wr32(E1000_TXDCTL(reg_idx), 0);
+ wrfl();
+ mdelay(10);
+
+ wr32(E1000_TDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_tx_desc));
+ wr32(E1000_TDBAL(reg_idx),
+ tdba & 0x00000000ffffffffULL);
+ wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+ ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+ wr32(E1000_TDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ txdctl |= IGB_TX_PTHRESH;
+ txdctl |= IGB_TX_HTHRESH << 8;
+ txdctl |= IGB_TX_WTHRESH << 16;
+
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: Rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+
+ rx_ring->rx_buffer_info = vzalloc(size);
+ if (!rx_ring->rx_buffer_info)
+ goto err;
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+
+err:
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = igb_setup_rx_resources(adapter->rx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_rx_resources(adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc, rxcsum;
+ u32 j, num_rx_queues;
+ static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741,
+ 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE,
+ 0xA32DCB77, 0x0CF23080, 0x3BB7426A,
+ 0xFA01ACBE };
+
+ /* Fill out hash function seeds */
+ for (j = 0; j < 10; j++)
+ wr32(E1000_RSSRK(j), rsskey[j]);
+
+ num_rx_queues = adapter->rss_queues;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /* 82576 supports 2 RSS queues for SR-IOV */
+ if (adapter->vfs_allocated_count)
+ num_rx_queues = 2;
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->rss_indir_tbl_init != num_rx_queues) {
+ for (j = 0; j < IGB_RETA_SIZE; j++)
+ adapter->rss_indir_tbl[j] =
+ (j * num_rx_queues) / IGB_RETA_SIZE;
+ adapter->rss_indir_tbl_init = num_rx_queues;
+ }
+ igb_write_rss_indir_tbl(adapter);
+
+ /* Disable raw packet checksumming so that RSS hash is placed in
+ * descriptor on writeback. No need to enable TCP/UDP/IP checksum
+ * offloads as they are enabled by default
+ */
+ rxcsum = rd32(E1000_RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+
+ if (adapter->hw.mac.type >= e1000_82576)
+ /* Enable Receive Checksum Offload for SCTP */
+ rxcsum |= E1000_RXCSUM_CRCOFL;
+
+ /* Don't need to set TUOFL or IPOFL, they default to 1 */
+ wr32(E1000_RXCSUM, rxcsum);
+
+ /* Generate RSS hash based on packet types, TCP/UDP
+ * port numbers and/or IPv4/v6 src and dst addresses
+ */
+ mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
+
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
+ if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
+
+ /* If VMDq is enabled then we set the appropriate mode for that, else
+ * we default to RSS so that an RSS hash is calculated per packet even
+ * if we are only using one queue
+ */
+ if (adapter->vfs_allocated_count) {
+ if (hw->mac.type > e1000_82575) {
+ /* Set the default pool for the PF's first queue */
+ u32 vtctl = rd32(E1000_VT_CTL);
+
+ vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+ E1000_VT_CTL_DISABLE_DEF_POOL);
+ vtctl |= adapter->vfs_allocated_count <<
+ E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+ wr32(E1000_VT_CTL, vtctl);
+ }
+ if (adapter->rss_queues > 1)
+ mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+ else
+ mrqc |= E1000_MRQC_ENABLE_VMDQ;
+ } else {
+ if (hw->mac.type != e1000_i211)
+ mrqc |= E1000_MRQC_ENABLE_RSS_4Q;
+ }
+ igb_vmm_control(adapter);
+
+ wr32(E1000_MRQC, mrqc);
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_rctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = rd32(E1000_RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
+ (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /* enable stripping of CRC. It's unlikely this will break BMC
+ * redirection as it did with e1000. Newer features require
+ * that the HW strips the CRC.
+ */
+ rctl |= E1000_RCTL_SECRC;
+
+ /* disable store bad packets and clear size bits. */
+ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
+
+ /* enable LPE to prevent packets larger than max_frame_size */
+ rctl |= E1000_RCTL_LPE;
+
+ /* disable queue 0 to prevent tail write w/o re-config */
+ wr32(E1000_RXDCTL(0), 0);
+
+ /* Attention!!! For SR-IOV PF driver operations you must enable
+ * queue drop for all VF and PF queues to prevent head of line blocking
+ * if an un-trusted VF does not provide descriptors to hardware.
+ */
+ if (adapter->vfs_allocated_count) {
+ /* set all queue drop enable bits */
+ wr32(E1000_QDE, ALL_QUEUES);
+ }
+
+ /* This is useful for sniffing bad packets. */
+ if (adapter->netdev->features & NETIF_F_RXALL) {
+ /* UPE and MPE will be handled by normal PROMISC logic
+ * in e1000e_set_rx_mode
+ */
+ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
+ E1000_RCTL_BAM | /* RX All Bcast Pkts */
+ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+
+ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
+ E1000_RCTL_DPF | /* Allow filtered pause */
+ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+ /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+ * and that breaks VLANs.
+ */
+ }
+
+ wr32(E1000_RCTL, rctl);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* if it isn't the PF check to see if VFs are enabled and
+ * increase the size to support vlan tags
+ */
+ if (vfn < adapter->vfs_allocated_count &&
+ adapter->vf_data[vfn].vlans_enabled)
+ size += VLAN_TAG_SIZE;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+ u32 max_frame_size = adapter->max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+ u16 pf_id = adapter->vfs_allocated_count;
+
+ if (pf_id) {
+ igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+ /* If we're in VMDQ or SR-IOV mode, then set global RLPML
+ * to our max jumbo frame size, in case we need to enable
+ * jumbo frames on one of the rings later.
+ * This will not pass over-length frames into the default
+ * queue because it's gated by the VMOLR.RLPML.
+ */
+ max_frame_size = MAX_JUMBO_FRAME_SIZE;
+ }
+
+ wr32(E1000_RLPML, max_frame_size);
+}
+
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+ int vfn, bool aupe)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* This register exists only on 82576 and newer so if we are older then
+ * we should exit and do nothing
+ */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ if (hw->mac.type == e1000_i350) {
+ u32 dvmolr;
+
+ dvmolr = rd32(E1000_DVMOLR(vfn));
+ dvmolr |= E1000_DVMOLR_STRVLAN;
+ wr32(E1000_DVMOLR(vfn), dvmolr);
+ }
+ if (aupe)
+ vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
+ else
+ vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
+
+ /* clear all bits that might not be set */
+ vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+ if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+ /* for VMDq only allow the VFs and pool 0 to accept broadcast and
+ * multicast packets
+ */
+ if (vfn <= adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
+
+ wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+ u32 srrctl = 0, rxdctl = 0;
+
+ /* disable the queue */
+ wr32(E1000_RXDCTL(reg_idx), 0);
+
+ /* Set DMA base address registers */
+ wr32(E1000_RDBAL(reg_idx),
+ rdba & 0x00000000ffffffffULL);
+ wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+ wr32(E1000_RDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_rx_desc));
+
+ /* initialize head and tail */
+ ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+ wr32(E1000_RDH(reg_idx), 0);
+ writel(0, ring->tail);
+
+ /* set descriptor configuration */
+ srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ if (hw->mac.type >= e1000_82580)
+ srrctl |= E1000_SRRCTL_TIMESTAMP;
+ /* Only set Drop Enable if we are supporting multiple queues */
+ if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+ /* set filtering for VMDQ pools */
+ igb_set_vmolr(adapter, reg_idx & 0x7, true);
+
+ rxdctl |= IGB_RX_PTHRESH;
+ rxdctl |= IGB_RX_HTHRESH << 8;
+ rxdctl |= IGB_RX_WTHRESH << 16;
+
+ /* enable receive descriptor fetching */
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ wr32(E1000_RXDCTL(reg_idx), rxdctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+ int i;
+
+ /* set UTA to appropriate mode */
+ igb_set_uta(adapter);
+
+ /* set the correct pool for the PF default MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void igb_free_tx_resources(struct igb_ring *tx_ring)
+{
+ igb_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!tx_ring->desc)
+ return;
+
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_free_tx_resources(adapter->tx_ring[i]);
+}
+
+void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
+ struct igb_tx_buffer *tx_buffer)
+{
+ if (tx_buffer->skb) {
+ dev_kfree_skb_any(tx_buffer->skb);
+ if (dma_unmap_len(tx_buffer, len))
+ dma_unmap_single(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ } else if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ }
+ tx_buffer->next_to_watch = NULL;
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *buffer_info;
+ unsigned long size;
+ u16 i;
+
+ if (!tx_ring->tx_buffer_info)
+ return;
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ netdev_tx_reset_queue(txring_txq(tx_ring));
+
+ size = sizeof(struct igb_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i])
+ igb_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void igb_free_rx_resources(struct igb_ring *rx_ring)
+{
+ igb_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!rx_ring->desc)
+ return;
+
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_ring *rx_ring)
+{
+ unsigned long size;
+ u16 i;
+
+ if (rx_ring->skb)
+ dev_kfree_skb(rx_ring->skb);
+ rx_ring->skb = NULL;
+
+ if (!rx_ring->rx_buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
+
+ if (!buffer_info->page)
+ continue;
+
+ dma_unmap_page(rx_ring->dev,
+ buffer_info->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ __free_page(buffer_info->page);
+
+ buffer_info->page = NULL;
+ }
+
+ size = sizeof(struct igb_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_alloc = 0;
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i])
+ igb_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ /* set the correct pool for the new PF MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ return 0;
+}
+
+/**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* The shared function expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ igb_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ igb_rar_set_qsel(adapter, ha->addr,
+ rar_entries--,
+ vfn);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--) {
+ wr32(E1000_RAH(rar_entries), 0);
+ wr32(E1000_RAL(rar_entries), 0);
+ }
+ wrfl();
+
+ return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ u32 rctl, vmolr = 0;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = rd32(E1000_RCTL);
+
+ /* clear the effected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ /* retain VLAN HW filtering if in VT mode */
+ if (adapter->vfs_allocated_count)
+ rctl |= E1000_RCTL_VFE;
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else {
+ /* Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = igb_write_mc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (count) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ }
+ }
+ /* Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
+ */
+ count = igb_write_uc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_UPE;
+ vmolr |= E1000_VMOLR_ROPE;
+ }
+ rctl |= E1000_RCTL_VFE;
+ }
+ wr32(E1000_RCTL, rctl);
+
+ /* In order to support SR-IOV and eventually VMDq it is necessary to set
+ * the VMOLR to enable the appropriate modes. Without this workaround
+ * we will have issues with VLAN tag stripping not being done for frames
+ * that are only arriving because we are the default pool
+ */
+ if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
+ return;
+
+ vmolr |= rd32(E1000_VMOLR(vfn)) &
+ ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+ wr32(E1000_VMOLR(vfn), vmolr);
+ igb_restore_vf_multicasts(adapter);
+}
+
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 wvbr = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ wvbr = rd32(E1000_WVBR);
+ if (!wvbr)
+ return;
+ break;
+ default:
+ break;
+ }
+
+ adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+ int j;
+
+ if (!adapter->wvbr)
+ return;
+
+ for (j = 0; j < adapter->vfs_allocated_count; j++) {
+ if (adapter->wvbr & (1 << j) ||
+ adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+ dev_warn(&adapter->pdev->dev,
+ "Spoof event(s) detected on VF %d\n", j);
+ adapter->wvbr &=
+ ~((1 << j) |
+ (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+ }
+ }
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
+static void igb_update_phy_info(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ igb_get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_has_link - check shared code for link and determine up/down
+ * @adapter: pointer to driver private info
+ **/
+bool igb_has_link(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (!hw->mac.get_link_status)
+ return true;
+ case e1000_media_type_internal_serdes:
+ hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if (((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211)) &&
+ (hw->phy.id == I210_I_PHY_ID)) {
+ if (!netif_carrier_ok(adapter->netdev)) {
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) {
+ adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ }
+ }
+
+ return link_active;
+}
+
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+ bool ret = false;
+ u32 ctrl_ext, thstat;
+
+ /* check for thermal sensor event on i350 copper only */
+ if (hw->mac.type == e1000_i350) {
+ thstat = rd32(E1000_THSTAT);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII))
+ ret = !!(thstat & event);
+ }
+
+ return ret;
+}
+
+/**
+ * igb_check_lvmmc - check for malformed packets received
+ * and indicated in LVMMC register
+ * @adapter: pointer to adapter
+ **/
+static void igb_check_lvmmc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 lvmmc;
+
+ lvmmc = rd32(E1000_LVMMC);
+ if (lvmmc) {
+ if (unlikely(net_ratelimit())) {
+ netdev_warn(adapter->netdev,
+ "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
+ lvmmc);
+ }
+ }
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work,
+ struct igb_adapter,
+ watchdog_task);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_info *phy = &hw->phy;
+ struct net_device *netdev = adapter->netdev;
+ u32 link;
+ int i;
+ u32 connsw;
+
+ link = igb_has_link(adapter);
+
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) {
+ if (time_after(jiffies, (adapter->link_check_timeout + HZ)))
+ adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
+ else
+ link = false;
+ }
+
+ /* Force link down if we have fiber to swap to */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ connsw = rd32(E1000_CONNSW);
+ if (!(connsw & E1000_CONNSW_AUTOSENSE_EN))
+ link = 0;
+ }
+ }
+ if (link) {
+ /* Perform a reset if the media type changed. */
+ if (hw->dev_spec._82575.media_changed) {
+ hw->dev_spec._82575.media_changed = false;
+ adapter->flags |= IGB_FLAG_MEDIA_RESET;
+ igb_reset(adapter);
+ }
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = rd32(E1000_CTRL);
+ /* Links status message must follow this format */
+ netdev_info(netdev,
+ "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
+
+ /* disable EEE if enabled */
+ if ((adapter->flags & IGB_FLAG_EEE) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ dev_info(&adapter->pdev->dev,
+ "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
+ adapter->hw.dev_spec._82575.eee_disable = true;
+ adapter->flags &= ~IGB_FLAG_EEE;
+ }
+
+ /* check if SmartSpeed worked */
+ igb_check_downshift(hw);
+ if (phy->speed_downgraded)
+ netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_LINK_THROTTLE))
+ netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ adapter->tx_timeout_factor = 14;
+ break;
+ case SPEED_100:
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+
+ igb_ping_all_vfs(adapter);
+ igb_check_vf_rate_limit(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_PWR_DOWN)) {
+ netdev_err(netdev, "The network adapter was stopped because it overheated\n");
+ }
+
+ /* Links status message must follow this format */
+ netdev_info(netdev, "igb: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ igb_ping_all_vfs(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+
+ /* link is down, time to check for alternate media */
+ if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ pm_schedule_suspend(netdev->dev.parent,
+ MSEC_PER_SEC * 5);
+
+ /* also check for alternate media here */
+ } else if (!netif_carrier_ok(netdev) &&
+ (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
+ igb_check_swap_media(adapter);
+ if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
+ schedule_work(&adapter->reset_task);
+ /* return immediately */
+ return;
+ }
+ }
+ }
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = adapter->tx_ring[i];
+ if (!netif_carrier_ok(netdev)) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ if (adapter->flags & IGB_FLAG_HAS_MSIX) {
+ u32 eics = 0;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ eics |= adapter->q_vector[i]->eims_value;
+ wr32(E1000_EICS, eics);
+ } else {
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ }
+
+ igb_spoof_check(adapter);
+ igb_ptp_rx_hang(adapter);
+
+ /* Check LVMMC register on i350/i354 only */
+ if ((adapter->hw.mac.type == e1000_i350) ||
+ (adapter->hw.mac.type == e1000_i354))
+ igb_check_lvmmc(adapter);
+
+ /* Reset the timer */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + HZ));
+ else
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * igb_update_ring_itr - update the dynamic ITR value based on packet size
+ * @q_vector: pointer to q_vector
+ *
+ * Stores a new ITR value based on strictly on packet size. This
+ * algorithm is less sophisticated than that used in igb_update_itr,
+ * due to the difficulty of synchronizing statistics across multiple
+ * receive rings. The divisors and thresholds used by this function
+ * were determined based on theoretical maximum wire speed and testing
+ * data, in order to minimize response time while increasing bulk
+ * throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: This function is called only when operating in a multiqueue
+ * receive environment.
+ **/
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
+{
+ int new_val = q_vector->itr_val;
+ int avg_wire_size = 0;
+ struct igb_adapter *adapter = q_vector->adapter;
+ unsigned int packets;
+
+ /* For non-gigabit speeds, just fix the interrupt rate at 4000
+ * ints/sec - ITR timer value of 120 ticks.
+ */
+ if (adapter->link_speed != SPEED_1000) {
+ new_val = IGB_4K_ITR;
+ goto set_itr_val;
+ }
+
+ packets = q_vector->rx.total_packets;
+ if (packets)
+ avg_wire_size = q_vector->rx.total_bytes / packets;
+
+ packets = q_vector->tx.total_packets;
+ if (packets)
+ avg_wire_size = max_t(u32, avg_wire_size,
+ q_vector->tx.total_bytes / packets);
+
+ /* if avg_wire_size isn't set no work was done */
+ if (!avg_wire_size)
+ goto clear_counts;
+
+ /* Add 24 bytes to size to account for CRC, preamble, and gap */
+ avg_wire_size += 24;
+
+ /* Don't starve jumbo frames */
+ avg_wire_size = min(avg_wire_size, 3000);
+
+ /* Give a little boost to mid-size frames */
+ if ((avg_wire_size > 300) && (avg_wire_size < 1200))
+ new_val = avg_wire_size / 3;
+ else
+ new_val = avg_wire_size / 2;
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (new_val < IGB_20K_ITR &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ new_val = IGB_20K_ITR;
+
+set_itr_val:
+ if (new_val != q_vector->itr_val) {
+ q_vector->itr_val = new_val;
+ q_vector->set_itr = 1;
+ }
+clear_counts:
+ q_vector->rx.total_bytes = 0;
+ q_vector->rx.total_packets = 0;
+ q_vector->tx.total_bytes = 0;
+ q_vector->tx.total_packets = 0;
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: pointer to q_vector
+ * @ring_container: ring info to update the itr for
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * This functionality is controlled by ethtool's coalescing settings.
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ **/
+static void igb_update_itr(struct igb_q_vector *q_vector,
+ struct igb_ring_container *ring_container)
+{
+ unsigned int packets = ring_container->total_packets;
+ unsigned int bytes = ring_container->total_bytes;
+ u8 itrval = ring_container->itr;
+
+ /* no packets, exit with status unchanged */
+ if (packets == 0)
+ return;
+
+ switch (itrval) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ itrval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ itrval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ itrval = bulk_latency;
+ else if ((packets > 35))
+ itrval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ itrval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ itrval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ itrval = low_latency;
+ } else if (bytes < 1500) {
+ itrval = low_latency;
+ }
+ break;
+ }
+
+ /* clear work counters since we have the values we need */
+ ring_container->total_bytes = 0;
+ ring_container->total_packets = 0;
+
+ /* write updated itr to ring container */
+ ring_container->itr = itrval;
+}
+
+static void igb_set_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 new_itr = q_vector->itr_val;
+ u8 current_itr = 0;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = IGB_4K_ITR;
+ goto set_itr_now;
+ }
+
+ igb_update_itr(q_vector, &q_vector->tx);
+ igb_update_itr(q_vector, &q_vector->rx);
+
+ current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (current_itr == lowest_latency &&
+ ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
+ (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
+ current_itr = low_latency;
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
+ break;
+ case low_latency:
+ new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
+ break;
+ case bulk_latency:
+ new_itr = IGB_4K_ITR; /* 4,000 ints/sec */
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != q_vector->itr_val) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > q_vector->itr_val ?
+ max((new_itr * q_vector->itr_val) /
+ (new_itr + (q_vector->itr_val >> 2)),
+ new_itr) : new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ q_vector->itr_val = new_itr;
+ q_vector->set_itr = 1;
+ }
+}
+
+static void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
+ u32 type_tucmd, u32 mss_l4len_idx)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ u16 i = tx_ring->next_to_use;
+
+ context_desc = IGB_TX_CTXTDESC(tx_ring, i);
+
+ i++;
+ tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+ /* set bits to identify this as an advanced context descriptor */
+ type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
+
+ /* For 82575, context index must be unique per ring. */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ mss_l4len_idx |= tx_ring->reg_idx << 4;
+
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = 0;
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+}
+
+static int igb_tso(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ u8 *hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens, type_tucmd;
+ u32 mss_l4len_idx, l4len;
+ int err;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ err = skb_cow_head(skb, 0);
+ if (err < 0)
+ return err;
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ if (first->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM |
+ IGB_TX_FLAGS_IPV4;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ first->tx_flags |= IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_CSUM;
+ }
+
+ /* compute header lengths */
+ l4len = tcp_hdrlen(skb);
+ *hdr_len = skb_transport_offset(skb) + l4len;
+
+ /* update gso size and bytecount with header size */
+ first->gso_segs = skb_shinfo(skb)->gso_segs;
+ first->bytecount += (first->gso_segs - 1) * *hdr_len;
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
+ mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
+
+ /* VLAN MACLEN IPLEN */
+ vlan_macip_lens = skb_network_header_len(skb);
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+
+ return 1;
+}
+
+static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
+{
+ struct sk_buff *skb = first->skb;
+ u32 vlan_macip_lens = 0;
+ u32 mss_l4len_idx = 0;
+ u32 type_tucmd = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
+ return;
+ } else {
+ u8 l4_hdr = 0;
+
+ switch (first->protocol) {
+ case htons(ETH_P_IP):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but proto=%x!\n",
+ first->protocol);
+ }
+ break;
+ }
+
+ switch (l4_hdr) {
+ case IPPROTO_TCP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ mss_l4len_idx = tcp_hdrlen(skb) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_SCTP:
+ type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+ mss_l4len_idx = sizeof(struct sctphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_UDP:
+ mss_l4len_idx = sizeof(struct udphdr) <<
+ E1000_ADVTXD_L4LEN_SHIFT;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but l4 proto=%x!\n",
+ l4_hdr);
+ }
+ break;
+ }
+
+ /* update TX checksum flag */
+ first->tx_flags |= IGB_TX_FLAGS_CSUM;
+ }
+
+ vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
+
+ igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
+}
+
+#define IGB_SET_FLAG(_input, _flag, _result) \
+ ((_flag <= _result) ? \
+ ((u32)(_input & _flag) * (_result / _flag)) : \
+ ((u32)(_input & _flag) / (_flag / _result)))
+
+static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
+{
+ /* set type for advanced descriptor with frame checksum insertion */
+ u32 cmd_type = E1000_ADVTXD_DTYP_DATA |
+ E1000_ADVTXD_DCMD_DEXT |
+ E1000_ADVTXD_DCMD_IFCS;
+
+ /* set HW vlan bit if vlan is present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN,
+ (E1000_ADVTXD_DCMD_VLE));
+
+ /* set segmentation bits for TSO */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO,
+ (E1000_ADVTXD_DCMD_TSE));
+
+ /* set timestamp bit if present */
+ cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP,
+ (E1000_ADVTXD_MAC_TSTAMP));
+
+ /* insert frame checksum */
+ cmd_type ^= IGB_SET_FLAG(skb->no_fcs, 1, E1000_ADVTXD_DCMD_IFCS);
+
+ return cmd_type;
+}
+
+static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
+ union e1000_adv_tx_desc *tx_desc,
+ u32 tx_flags, unsigned int paylen)
+{
+ u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
+
+ /* 82575 requires a unique index per ring */
+ if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
+ olinfo_status |= tx_ring->reg_idx << 4;
+
+ /* insert L4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_CSUM,
+ (E1000_TXD_POPTS_TXSM << 8));
+
+ /* insert IPv4 checksum */
+ olinfo_status |= IGB_SET_FLAG(tx_flags,
+ IGB_TX_FLAGS_IPV4,
+ (E1000_TXD_POPTS_IXSM << 8));
+
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+}
+
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ struct net_device *netdev = tx_ring->netdev;
+
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it.
+ */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available.
+ */
+ if (igb_desc_unused(tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp2);
+ tx_ring->tx_stats.restart_queue2++;
+ u64_stats_update_end(&tx_ring->tx_syncp2);
+
+ return 0;
+}
+
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
+{
+ if (igb_desc_unused(tx_ring) >= size)
+ return 0;
+ return __igb_maybe_stop_tx(tx_ring, size);
+}
+
+static void igb_tx_map(struct igb_ring *tx_ring,
+ struct igb_tx_buffer *first,
+ const u8 hdr_len)
+{
+ struct sk_buff *skb = first->skb;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ struct skb_frag_struct *frag;
+ dma_addr_t dma;
+ unsigned int data_len, size;
+ u32 tx_flags = first->tx_flags;
+ u32 cmd_type = igb_tx_cmd_type(skb, tx_flags);
+ u16 i = tx_ring->next_to_use;
+
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+
+ igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len);
+
+ size = skb_headlen(skb);
+ data_len = skb->data_len;
+
+ dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+ tx_buffer = first;
+
+ for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+ if (dma_mapping_error(tx_ring->dev, dma))
+ goto dma_error;
+
+ /* record length, and DMA address */
+ dma_unmap_len_set(tx_buffer, len, size);
+ dma_unmap_addr_set(tx_buffer, dma, dma);
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
+ while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ dma += IGB_MAX_DATA_PER_TXD;
+ size -= IGB_MAX_DATA_PER_TXD;
+
+ tx_desc->read.buffer_addr = cpu_to_le64(dma);
+ }
+
+ if (likely(!data_len))
+ break;
+
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
+
+ i++;
+ tx_desc++;
+ if (i == tx_ring->count) {
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+ tx_desc->read.olinfo_status = 0;
+
+ size = skb_frag_size(frag);
+ data_len -= size;
+
+ dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
+ size, DMA_TO_DEVICE);
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ }
+
+ /* write last descriptor with RS and EOP bits */
+ cmd_type |= size | IGB_TXD_DCMD;
+ tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
+
+ netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+ /* set the timestamp */
+ first->time_stamp = jiffies;
+
+ /* Force memory writes to complete before letting h/w know there
+ * are new descriptors to fetch. (Only applicable for weak-ordered
+ * memory model archs, such as IA-64).
+ *
+ * We also need this memory barrier to make certain all of the
+ * status bits have been updated before next_to_watch is written.
+ */
+ wmb();
+
+ /* set next_to_watch value indicating a packet is present */
+ first->next_to_watch = tx_desc;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ /* Make sure there is space in the ring for the next send. */
+ igb_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
+ writel(i, tx_ring->tail);
+
+ /* we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
+ mmiowb();
+ }
+ return;
+
+dma_error:
+ dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+ /* clear dma mappings for failed tx_buffer_info map */
+ for (;;) {
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+ if (tx_buffer == first)
+ break;
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ }
+
+ tx_ring->next_to_use = i;
+}
+
+netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
+ struct igb_ring *tx_ring)
+{
+ struct igb_tx_buffer *first;
+ int tso;
+ u32 tx_flags = 0;
+ u16 count = TXD_USE_COUNT(skb_headlen(skb));
+ __be16 protocol = vlan_get_protocol(skb);
+ u8 hdr_len = 0;
+
+ /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for context descriptor,
+ * otherwise try next time
+ */
+ if (NETDEV_FRAG_PAGE_MAX_SIZE > IGB_MAX_DATA_PER_TXD) {
+ unsigned short f;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+ } else {
+ count += skb_shinfo(skb)->nr_frags;
+ }
+
+ if (igb_maybe_stop_tx(tx_ring, count + 3)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ /* record the location of the first descriptor for this packet */
+ first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+ first->skb = skb;
+ first->bytecount = skb->len;
+ first->gso_segs = 1;
+
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+ struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
+
+ if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS,
+ &adapter->state)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= IGB_TX_FLAGS_TSTAMP;
+
+ adapter->ptp_tx_skb = skb_get(skb);
+ adapter->ptp_tx_start = jiffies;
+ if (adapter->hw.mac.type == e1000_82576)
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ skb_tx_timestamp(skb);
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= IGB_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ /* record initial flags and protocol */
+ first->tx_flags = tx_flags;
+ first->protocol = protocol;
+
+ tso = igb_tso(tx_ring, first, &hdr_len);
+ if (tso < 0)
+ goto out_drop;
+ else if (!tso)
+ igb_tx_csum(tx_ring, first);
+
+ igb_tx_map(tx_ring, first, hdr_len);
+
+ return NETDEV_TX_OK;
+
+out_drop:
+ igb_unmap_and_free_tx_resource(tx_ring, first);
+
+ return NETDEV_TX_OK;
+}
+
+static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
+ struct sk_buff *skb)
+{
+ unsigned int r_idx = skb->queue_mapping;
+
+ if (r_idx >= adapter->num_tx_queues)
+ r_idx = r_idx % adapter->num_tx_queues;
+
+ return adapter->tx_ring[r_idx];
+}
+
+static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* The minimum packet size with TCTL.PSP set is 17 so pad the skb
+ * in order to meet this minimum size requirement.
+ */
+ if (unlikely(skb->len < 17)) {
+ if (skb_pad(skb, 17 - skb->len))
+ return NETDEV_TX_OK;
+ skb->len = 17;
+ skb_set_tail_pointer(skb, 17);
+ }
+
+ return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+
+ if (hw->mac.type >= e1000_82580)
+ hw->dev_spec._82575.global_device_reset = true;
+
+ schedule_work(&adapter->reset_task);
+ wr32(E1000_EICS,
+ (adapter->eims_enable_mask & ~adapter->eims_other));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter;
+ adapter = container_of(work, struct igb_adapter, reset_task);
+
+ igb_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ **/
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ memcpy(stats, &adapter->stats64, sizeof(*stats));
+ spin_unlock(&adapter->stats64_lock);
+
+ return stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9238
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ /* adjust max frame to be at least the size of a standard frame */
+ if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
+ max_frame = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ /* igb_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+
+ dev_info(&pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+ else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+void igb_update_stats(struct igb_adapter *adapter,
+ struct rtnl_link_stats64 *net_stats)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 reg, mpc;
+ int i;
+ u64 bytes, packets;
+ unsigned int start;
+ u64 _bytes, _packets;
+
+ /* Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ bytes = 0;
+ packets = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ u32 rqdpc = rd32(E1000_RQDPC(i));
+ if (hw->mac.type >= e1000_i210)
+ wr32(E1000_RQDPC(i), 0);
+
+ if (rqdpc) {
+ ring->rx_stats.drops += rqdpc;
+ net_stats->rx_fifo_errors += rqdpc;
+ }
+
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
+ _bytes = ring->rx_stats.bytes;
+ _packets = ring->rx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+
+ net_stats->rx_bytes = bytes;
+ net_stats->rx_packets = packets;
+
+ bytes = 0;
+ packets = 0;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = adapter->tx_ring[i];
+ do {
+ start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
+ _bytes = ring->tx_stats.bytes;
+ _packets = ring->tx_stats.packets;
+ } while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+ net_stats->tx_bytes = bytes;
+ net_stats->tx_packets = packets;
+ rcu_read_unlock();
+
+ /* read stats registers */
+ adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+ adapter->stats.gprc += rd32(E1000_GPRC);
+ adapter->stats.gorc += rd32(E1000_GORCL);
+ rd32(E1000_GORCH); /* clear GORCL */
+ adapter->stats.bprc += rd32(E1000_BPRC);
+ adapter->stats.mprc += rd32(E1000_MPRC);
+ adapter->stats.roc += rd32(E1000_ROC);
+
+ adapter->stats.prc64 += rd32(E1000_PRC64);
+ adapter->stats.prc127 += rd32(E1000_PRC127);
+ adapter->stats.prc255 += rd32(E1000_PRC255);
+ adapter->stats.prc511 += rd32(E1000_PRC511);
+ adapter->stats.prc1023 += rd32(E1000_PRC1023);
+ adapter->stats.prc1522 += rd32(E1000_PRC1522);
+ adapter->stats.symerrs += rd32(E1000_SYMERRS);
+ adapter->stats.sec += rd32(E1000_SEC);
+
+ mpc = rd32(E1000_MPC);
+ adapter->stats.mpc += mpc;
+ net_stats->rx_fifo_errors += mpc;
+ adapter->stats.scc += rd32(E1000_SCC);
+ adapter->stats.ecol += rd32(E1000_ECOL);
+ adapter->stats.mcc += rd32(E1000_MCC);
+ adapter->stats.latecol += rd32(E1000_LATECOL);
+ adapter->stats.dc += rd32(E1000_DC);
+ adapter->stats.rlec += rd32(E1000_RLEC);
+ adapter->stats.xonrxc += rd32(E1000_XONRXC);
+ adapter->stats.xontxc += rd32(E1000_XONTXC);
+ adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+ adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+ adapter->stats.fcruc += rd32(E1000_FCRUC);
+ adapter->stats.gptc += rd32(E1000_GPTC);
+ adapter->stats.gotc += rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH); /* clear GOTCL */
+ adapter->stats.rnbc += rd32(E1000_RNBC);
+ adapter->stats.ruc += rd32(E1000_RUC);
+ adapter->stats.rfc += rd32(E1000_RFC);
+ adapter->stats.rjc += rd32(E1000_RJC);
+ adapter->stats.tor += rd32(E1000_TORH);
+ adapter->stats.tot += rd32(E1000_TOTH);
+ adapter->stats.tpr += rd32(E1000_TPR);
+
+ adapter->stats.ptc64 += rd32(E1000_PTC64);
+ adapter->stats.ptc127 += rd32(E1000_PTC127);
+ adapter->stats.ptc255 += rd32(E1000_PTC255);
+ adapter->stats.ptc511 += rd32(E1000_PTC511);
+ adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+ adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+ adapter->stats.mptc += rd32(E1000_MPTC);
+ adapter->stats.bptc += rd32(E1000_BPTC);
+
+ adapter->stats.tpt += rd32(E1000_TPT);
+ adapter->stats.colc += rd32(E1000_COLC);
+
+ adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+ /* read internal phy specific stats */
+ reg = rd32(E1000_CTRL_EXT);
+ if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+ adapter->stats.rxerrc += rd32(E1000_RXERRC);
+
+ /* this stat has invalid values on i210/i211 */
+ if ((hw->mac.type != e1000_i210) &&
+ (hw->mac.type != e1000_i211))
+ adapter->stats.tncrs += rd32(E1000_TNCRS);
+ }
+
+ adapter->stats.tsctc += rd32(E1000_TSCTC);
+ adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+ adapter->stats.iac += rd32(E1000_IAC);
+ adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+ adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+ adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+ adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+ adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+ adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+ adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+ adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+ /* Fill out the OS statistics structure */
+ net_stats->multicast = adapter->stats.mprc;
+ net_stats->collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
+ net_stats->rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ net_stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ net_stats->rx_crc_errors = adapter->stats.crcerrs;
+ net_stats->rx_frame_errors = adapter->stats.algnerrc;
+ net_stats->rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ net_stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ net_stats->tx_aborted_errors = adapter->stats.ecol;
+ net_stats->tx_window_errors = adapter->stats.latecol;
+ net_stats->tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Management Stats */
+ adapter->stats.mgptc += rd32(E1000_MGTPTC);
+ adapter->stats.mgprc += rd32(E1000_MGTPRC);
+ adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+ /* OS2BMC Stats */
+ reg = rd32(E1000_MANC);
+ if (reg & E1000_MANC_EN_BMC2OS) {
+ adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+ adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+ adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+ adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+ }
+}
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = rd32(E1000_ICR);
+ /* reading ICR causes bit 31 of EICR to be cleared */
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ /* The DMA Out of Sync is also indication of a spoof event
+ * in IOV mode. Check the Wrong VM Behavior register to
+ * see if it is really a spoof event.
+ */
+ igb_check_wvbr(adapter);
+ }
+
+ /* Check for a mailbox event */
+ if (icr & E1000_ICR_VMMB)
+ igb_msg_task(adapter);
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ wr32(E1000_EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_write_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 itr_val = q_vector->itr_val & 0x7FFC;
+
+ if (!q_vector->set_itr)
+ return;
+
+ if (!itr_val)
+ itr_val = 0x4;
+
+ if (adapter->hw.mac.type == e1000_82575)
+ itr_val |= itr_val << 16;
+ else
+ itr_val |= E1000_EITR_CNT_IGNR;
+
+ writel(itr_val, q_vector->itr_register);
+ q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+ struct igb_q_vector *q_vector = data;
+
+ /* Write the ITR value calculated from the previous interrupt. */
+ igb_write_itr(q_vector);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_IGB_DCA
+static void igb_update_tx_dca(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
+ E1000_DCA_TXCTRL_DATA_RRO_EN |
+ E1000_DCA_TXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
+}
+
+static void igb_update_rx_dca(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
+
+ /* We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
+ E1000_DCA_RXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
+}
+
+static void igb_update_dca(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ int cpu = get_cpu();
+
+ if (q_vector->cpu == cpu)
+ goto out_no_update;
+
+ if (q_vector->tx.ring)
+ igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
+
+ if (q_vector->rx.ring)
+ igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
+
+ q_vector->cpu = cpu;
+out_no_update:
+ put_cpu();
+}
+
+static void igb_setup_dca(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
+ return;
+
+ /* Always use CB2 mode, difference is masked in the CB driver. */
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ adapter->q_vector[i]->cpu = -1;
+ igb_update_dca(adapter->q_vector[i]);
+ }
+}
+
+static int __igb_notify_dca(struct device *dev, void *data)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long event = *(unsigned long *)data;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ /* if already enabled, don't do it again */
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+ break;
+ if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ /* without this a class_device is left
+ * hanging around in the sysfs model
+ */
+ dca_remove_requester(dev);
+ dev_info(&pdev->dev, "DCA disabled\n");
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
+ __igb_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_IGB_DCA */
+
+#ifdef CONFIG_PCI_IOV
+static int igb_vf_configure(struct igb_adapter *adapter, int vf)
+{
+ unsigned char mac_addr[ETH_ALEN];
+
+ eth_zero_addr(mac_addr);
+ igb_set_vf_mac(adapter, vf, mac_addr);
+
+ /* By default spoof check is enabled for all VFs */
+ adapter->vf_data[vf].spoofchk_enabled = true;
+
+ return 0;
+}
+
+#endif
+static void igb_ping_all_vfs(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ping;
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
+ ping = E1000_PF_CONTROL_MSG;
+ if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
+ ping |= E1000_VT_MSGTYPE_CTS;
+ igb_write_mbx(hw, &ping, 1, i);
+ }
+}
+
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr = rd32(E1000_VMOLR(vf));
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+ vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
+ IGB_VF_FLAG_MULTI_PROMISC);
+ vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+ vmolr |= E1000_VMOLR_MPME;
+ vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
+ *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+ } else {
+ /* if we have hashes and we are clearing a multicast promisc
+ * flag we need to write the hashes to the MTA as this step
+ * was previously skipped
+ */
+ if (vf_data->num_vf_mc_hashes > 30) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ int j;
+
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ }
+
+ wr32(E1000_VMOLR(vf), vmolr);
+
+ /* there are flags left unprocessed, likely not supported */
+ if (*msgbuf & E1000_VT_MSGINFO_MASK)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int igb_set_vf_multicasts(struct igb_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ int i;
+
+ /* salt away the number of multicast addresses assigned
+ * to this VF for later use to restore when the PF multi cast
+ * list changes
+ */
+ vf_data->num_vf_mc_hashes = n;
+
+ /* only up to 30 hash values supported */
+ if (n > 30)
+ n = 30;
+
+ /* store the hashes for later use */
+ for (i = 0; i < n; i++)
+ vf_data->vf_mc_hashes[i] = hash_list[i];
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+
+ return 0;
+}
+
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data;
+ int i, j;
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ u32 vmolr = rd32(E1000_VMOLR(i));
+
+ vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ vf_data = &adapter->vf_data[i];
+
+ if ((vf_data->num_vf_mc_hashes > 30) ||
+ (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ wr32(E1000_VMOLR(i), vmolr);
+ }
+}
+
+static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pool_mask, reg, vid;
+ int i;
+
+ pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+
+ /* remove the vf from the pool */
+ reg &= ~pool_mask;
+
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
+ (reg & E1000_VLVF_VLANID_ENABLE)) {
+ reg = 0;
+ vid = reg & E1000_VLVF_VLANID_MASK;
+ igb_vfta_set(hw, vid, false);
+ }
+
+ wr32(E1000_VLVF(i), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled = 0;
+}
+
+static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg, i;
+
+ /* The vlvf table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return -1;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return -1;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (add) {
+ if (i == E1000_VLVF_ARRAY_SIZE) {
+ /* Did not find a matching VLAN ID entry that was
+ * enabled. Search for a free filter entry, i.e.
+ * one without the enable bit set
+ */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if (!(reg & E1000_VLVF_VLANID_ENABLE))
+ break;
+ }
+ }
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* Found an enabled/available entry */
+ reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* if !enabled we need to set this up in vfta */
+ if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ reg |= E1000_VLVF_VLANID_ENABLE;
+ }
+ reg &= ~E1000_VLVF_VLANID_MASK;
+ reg |= vid;
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size += 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled++;
+ }
+ } else {
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* remove vf from the pool */
+ reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
+ reg = 0;
+ igb_vfta_set(hw, vid, false);
+ }
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ adapter->vf_data[vf].vlans_enabled--;
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size -= 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+ }
+ }
+ return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (vid)
+ wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+ else
+ wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos)
+{
+ int err = 0;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+ if (vlan || qos) {
+ err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+ if (err)
+ goto out;
+ igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+ igb_set_vmolr(adapter, vf, !vlan);
+ adapter->vf_data[vf].pf_vlan = vlan;
+ adapter->vf_data[vf].pf_qos = qos;
+ dev_info(&adapter->pdev->dev,
+ "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF VLAN has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ } else {
+ igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+ false, vf);
+ igb_set_vmvir(adapter, vlan, vf);
+ igb_set_vmolr(adapter, vf, true);
+ adapter->vf_data[vf].pf_vlan = 0;
+ adapter->vf_data[vf].pf_qos = 0;
+ }
+out:
+ return err;
+}
+
+static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+ u32 reg;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (i >= E1000_VLVF_ARRAY_SIZE)
+ i = -1;
+
+ return i;
+}
+
+static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+ int err = 0;
+
+ /* If in promiscuous mode we need to make sure the PF also has
+ * the VLAN filter set.
+ */
+ if (add && (adapter->netdev->flags & IFF_PROMISC))
+ err = igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ if (err)
+ goto out;
+
+ err = igb_vlvf_set(adapter, vid, add, vf);
+
+ if (err)
+ goto out;
+
+ /* Go through all the checks to see if the VLAN filter should
+ * be wiped completely.
+ */
+ if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
+ u32 vlvf, bits;
+ int regndx = igb_find_vlvf_entry(adapter, vid);
+
+ if (regndx < 0)
+ goto out;
+ /* See if any other pools are set for this VLAN filter
+ * entry other than the PF.
+ */
+ vlvf = bits = rd32(E1000_VLVF(regndx));
+ bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
+ adapter->vfs_allocated_count);
+ /* If the filter was removed then ensure PF pool bit
+ * is cleared if the PF only added itself to the pool
+ * because the PF is in promiscuous mode.
+ */
+ if ((vlvf & VLAN_VID_MASK) == vid &&
+ !test_bit(vid, adapter->active_vlans) &&
+ !bits)
+ igb_vlvf_set(adapter, vid, add,
+ adapter->vfs_allocated_count);
+ }
+
+out:
+ return err;
+}
+
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
+{
+ /* clear flags - except flag that indicates PF has set the MAC */
+ adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
+ adapter->vf_data[vf].last_nack = jiffies;
+
+ /* reset offloads to defaults */
+ igb_set_vmolr(adapter, vf, true);
+
+ /* reset vlans for device */
+ igb_clear_vf_vfta(adapter, vf);
+ if (adapter->vf_data[vf].pf_vlan)
+ igb_ndo_set_vf_vlan(adapter->netdev, vf,
+ adapter->vf_data[vf].pf_vlan,
+ adapter->vf_data[vf].pf_qos);
+ else
+ igb_clear_vf_vfta(adapter, vf);
+
+ /* reset multicast table array for vf */
+ adapter->vf_data[vf].num_vf_mc_hashes = 0;
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+}
+
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+ /* clear mac address as we were hotplug removed/added */
+ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+ eth_zero_addr(vf_mac);
+
+ /* process remaining reset events */
+ igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+ u32 reg, msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* process all the same items cleared in a function level reset */
+ igb_vf_reset(adapter, vf);
+
+ /* set vf mac address */
+ igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
+
+ /* enable transmit and receive for vf */
+ reg = rd32(E1000_VFTE);
+ wr32(E1000_VFTE, reg | (1 << vf));
+ reg = rd32(E1000_VFRE);
+ wr32(E1000_VFRE, reg | (1 << vf));
+
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
+
+ /* reply to reset with ack and vf mac address */
+ msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+ memcpy(addr, vf_mac, ETH_ALEN);
+ igb_write_mbx(hw, msgbuf, 3, vf);
+}
+
+static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
+{
+ /* The VF MAC Address is stored in a packed array of bytes
+ * starting at the second 32 bit word of the msg array
+ */
+ unsigned char *addr = (char *)&msg[1];
+ int err = -1;
+
+ if (is_valid_ether_addr(addr))
+ err = igb_set_vf_mac(adapter, vf, addr);
+
+ return err;
+}
+
+static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ u32 msg = E1000_VT_MSGTYPE_NACK;
+
+ /* if device isn't clear to send it shouldn't be reading either */
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+ time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+ igb_write_mbx(hw, &msg, 1, vf);
+ vf_data->last_nack = jiffies;
+ }
+}
+
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ s32 retval;
+
+ retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
+
+ if (retval) {
+ /* if receive failed revoke VF CTS stats and restart init */
+ dev_err(&pdev->dev, "Error receiving message from VF\n");
+ vf_data->flags &= ~IGB_VF_FLAG_CTS;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ goto out;
+ }
+
+ /* this is a message we already processed, do nothing */
+ if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
+ return;
+
+ /* until the vf completes a reset it should not be
+ * allowed to start any configuration.
+ */
+ if (msgbuf[0] == E1000_VF_RESET) {
+ igb_vf_reset_msg(adapter, vf);
+ return;
+ }
+
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ retval = -1;
+ goto out;
+ }
+
+ switch ((msgbuf[0] & 0xFFFF)) {
+ case E1000_VF_SET_MAC_ADDR:
+ retval = -EINVAL;
+ if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+ retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+ else
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
+ vf);
+ break;
+ case E1000_VF_SET_PROMISC:
+ retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_MULTICAST:
+ retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_LPE:
+ retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
+ break;
+ case E1000_VF_SET_VLAN:
+ retval = -1;
+ if (vf_data->pf_vlan)
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
+ vf);
+ else
+ retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+ retval = -1;
+ break;
+ }
+
+ msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
+ /* notify the VF of the results of what it sent us */
+ if (retval)
+ msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
+ else
+ msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
+
+ igb_write_mbx(hw, msgbuf, 1, vf);
+}
+
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vf;
+
+ for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+ /* process any reset requests */
+ if (!igb_check_for_rst(hw, vf))
+ igb_vf_reset_event(adapter, vf);
+
+ /* process any messages pending */
+ if (!igb_check_for_msg(hw, vf))
+ igb_rcv_msg_from_vf(adapter, vf);
+
+ /* process any acks */
+ if (!igb_check_for_ack(hw, vf))
+ igb_rcv_ack_from_vf(adapter, vf);
+ }
+}
+
+/**
+ * igb_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return;
+
+ for (i = 0; i < hw->mac.uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* read ICR disables interrupts using IAM */
+ u32 icr = rd32(E1000_ICR);
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Legacy Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write
+ */
+ u32 icr = rd32(E1000_ICR);
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (icr & E1000_ICR_TS) {
+ u32 tsicr = rd32(E1000_TSICR);
+
+ if (tsicr & E1000_TSICR_TXTS) {
+ /* acknowledge the interrupt */
+ wr32(E1000_TSICR, E1000_TSICR_TXTS);
+ /* retrieve hardware timestamp */
+ schedule_work(&adapter->ptp_tx_work);
+ }
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_ring_irq_enable(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
+ (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
+ if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
+ igb_set_itr(q_vector);
+ else
+ igb_update_ring_itr(q_vector);
+ }
+
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMS, q_vector->eims_value);
+ else
+ igb_irq_enable(adapter);
+ }
+}
+
+/**
+ * igb_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ **/
+static int igb_poll(struct napi_struct *napi, int budget)
+{
+ struct igb_q_vector *q_vector = container_of(napi,
+ struct igb_q_vector,
+ napi);
+ bool clean_complete = true;
+
+#ifdef CONFIG_IGB_DCA
+ if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+ igb_update_dca(q_vector);
+#endif
+ if (q_vector->tx.ring)
+ clean_complete = igb_clean_tx_irq(q_vector);
+
+ if (q_vector->rx.ring)
+ clean_complete &= igb_clean_rx_irq(q_vector, budget);
+
+ /* If all work not completed, return budget and keep polling */
+ if (!clean_complete)
+ return budget;
+
+ /* If not enough Rx work done, exit the polling mode */
+ napi_complete(napi);
+ igb_ring_irq_enable(q_vector);
+
+ return 0;
+}
+
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: pointer to q_vector containing needed info
+ *
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct igb_ring *tx_ring = q_vector->tx.ring;
+ struct igb_tx_buffer *tx_buffer;
+ union e1000_adv_tx_desc *tx_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int budget = q_vector->tx.work_limit;
+ unsigned int i = tx_ring->next_to_clean;
+
+ if (test_bit(__IGB_DOWN, &adapter->state))
+ return true;
+
+ tx_buffer = &tx_ring->tx_buffer_info[i];
+ tx_desc = IGB_TX_DESC(tx_ring, i);
+ i -= tx_ring->count;
+
+ do {
+ union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+ /* if next_to_watch is not set then there is no work pending */
+ if (!eop_desc)
+ break;
+
+ /* prevent any other reads prior to eop_desc */
+ read_barrier_depends();
+
+ /* if DD is not set pending work has not been completed */
+ if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
+ break;
+
+ /* clear next_to_watch to prevent false hangs */
+ tx_buffer->next_to_watch = NULL;
+
+ /* update the statistics for this packet */
+ total_bytes += tx_buffer->bytecount;
+ total_packets += tx_buffer->gso_segs;
+
+ /* free the skb */
+ dev_consume_skb_any(tx_buffer->skb);
+
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+
+ /* clear tx_buffer data */
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ /* clear last DMA location and unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+ }
+ }
+
+ /* move us one more past the eop_desc for start of next pkt */
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer_info;
+ tx_desc = IGB_TX_DESC(tx_ring, 0);
+ }
+
+ /* issue prefetch for next Tx descriptor */
+ prefetch(tx_desc);
+
+ /* update budget accounting */
+ budget--;
+ } while (likely(budget));
+
+ netdev_tx_completed_queue(txring_txq(tx_ring),
+ total_packets, total_bytes);
+ i += tx_ring->count;
+ tx_ring->next_to_clean = i;
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.bytes += total_bytes;
+ tx_ring->tx_stats.packets += total_packets;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ q_vector->tx.total_bytes += total_bytes;
+ q_vector->tx.total_packets += total_packets;
+
+ if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
+ clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
+ if (tx_buffer->next_to_watch &&
+ time_after(jiffies, tx_buffer->time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ dev_err(tx_ring->dev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%p>\n"
+ " jiffies <%lx>\n"
+ " desc.status <%x>\n",
+ tx_ring->queue_index,
+ rd32(E1000_TDH(tx_ring->reg_idx)),
+ readl(tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_buffer->time_stamp,
+ tx_buffer->next_to_watch,
+ jiffies,
+ tx_buffer->next_to_watch->wb.status);
+ netif_stop_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ /* we are about to reset, no point in enabling stuff */
+ return true;
+ }
+ }
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(total_packets &&
+ netif_carrier_ok(tx_ring->netdev) &&
+ igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev,
+ tx_ring->queue_index) &&
+ !(test_bit(__IGB_DOWN, &adapter->state))) {
+ netif_wake_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.restart_queue++;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ }
+ }
+
+ return !!budget;
+}
+
+/**
+ * igb_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void igb_reuse_rx_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *old_buff)
+{
+ struct igb_rx_buffer *new_buff;
+ u16 nta = rx_ring->next_to_alloc;
+
+ new_buff = &rx_ring->rx_buffer_info[nta];
+
+ /* update, and store next to alloc */
+ nta++;
+ rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+ /* transfer page from old buffer to new buffer */
+ *new_buff = *old_buff;
+
+ /* sync the buffer for use by the device */
+ dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
+ old_buff->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+}
+
+static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
+ struct page *page,
+ unsigned int truesize)
+{
+ /* avoid re-using remote pages */
+ if (unlikely(page_to_nid(page) != numa_node_id()))
+ return false;
+
+ if (unlikely(page->pfmemalloc))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= IGB_RX_BUFSZ;
+
+ /* Even if we own the page, we are not allowed to use atomic_set()
+ * This would break get_page_unless_zero() users.
+ */
+ atomic_inc(&page->_count);
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
+ return false;
+
+ /* bump ref count on page before it is given to the stack */
+ get_page(page);
+#endif
+
+ return true;
+}
+
+/**
+ * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool igb_add_rx_frag(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *rx_buffer,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct page *page = rx_buffer->page;
+ unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
+#if (PAGE_SIZE < 8192)
+ unsigned int truesize = IGB_RX_BUFSZ;
+#else
+ unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+#endif
+
+ if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) {
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+ va += IGB_TS_HDR_LEN;
+ size -= IGB_TS_HDR_LEN;
+ }
+
+ memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+ /* we can reuse buffer as-is, just make sure it is local */
+ if (likely((page_to_nid(page) == numa_node_id()) &&
+ !page->pfmemalloc))
+ return true;
+
+ /* this page cannot be reused so discard it */
+ put_page(page);
+ return false;
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ rx_buffer->page_offset, size, truesize);
+
+ return igb_can_reuse_rx_page(rx_buffer, page, truesize);
+}
+
+static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct igb_rx_buffer *rx_buffer;
+ struct page *page;
+
+ rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
+
+ page = rx_buffer->page;
+ prefetchw(page);
+
+ if (likely(!skb)) {
+ void *page_addr = page_address(page) +
+ rx_buffer->page_offset;
+
+ /* prefetch first cache line of first page */
+ prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+ prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+ /* allocate a skb to store the frags */
+ skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+ IGB_RX_HDR_LEN);
+ if (unlikely(!skb)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return NULL;
+ }
+
+ /* we will be copying header into skb->data in
+ * pskb_may_pull so it is in our interest to prefetch
+ * it now to avoid a possible cache miss
+ */
+ prefetchw(skb->data);
+ }
+
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ IGB_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* pull page into skb */
+ if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ /* hand second half of page back to the ring */
+ igb_reuse_rx_page(rx_ring, rx_buffer);
+ } else {
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page(rx_ring->dev, rx_buffer->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ }
+
+ /* clear contents of rx_buffer */
+ rx_buffer->page = NULL;
+
+ return skb;
+}
+
+static inline void igb_rx_checksum(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
+ return;
+
+ /* Rx checksum disabled via ethtool */
+ if (!(ring->netdev->features & NETIF_F_RXCSUM))
+ return;
+
+ /* TCP/UDP checksum error bit is set */
+ if (igb_test_staterr(rx_desc,
+ E1000_RXDEXT_STATERR_TCPE |
+ E1000_RXDEXT_STATERR_IPE)) {
+ /* work around errata with sctp packets where the TCPE aka
+ * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+ * packets, (aka let the stack check the crc32c)
+ */
+ if (!((skb->len == 60) &&
+ test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
+ u64_stats_update_begin(&ring->rx_syncp);
+ ring->rx_stats.csum_err++;
+ u64_stats_update_end(&ring->rx_syncp);
+ }
+ /* let the stack verify checksum errors */
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
+ E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dev_dbg(ring->dev, "cksum success: bits %08X\n",
+ le32_to_cpu(rx_desc->wb.upper.status_error));
+}
+
+static inline void igb_rx_hash(struct igb_ring *ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (ring->netdev->features & NETIF_F_RXHASH)
+ skb_set_hash(skb,
+ le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
+ PKT_HASH_TYPE_L3);
+}
+
+/**
+ * igb_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean. If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool igb_is_non_eop(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc)
+{
+ u32 ntc = rx_ring->next_to_clean + 1;
+
+ /* fetch, update, and store next to clean */
+ ntc = (ntc < rx_ring->count) ? ntc : 0;
+ rx_ring->next_to_clean = ntc;
+
+ prefetch(IGB_RX_DESC(rx_ring, ntc));
+
+ if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)))
+ return false;
+
+ return true;
+}
+
+/**
+ * igb_pull_tail - igb specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an igb specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void igb_pull_tail(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /* it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) {
+ /* retrieve timestamp from buffer */
+ igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
+
+ /* update pointers to remove timestamp header */
+ skb_frag_size_sub(frag, IGB_TS_HDR_LEN);
+ frag->page_offset += IGB_TS_HDR_LEN;
+ skb->data_len -= IGB_TS_HDR_LEN;
+ skb->len -= IGB_TS_HDR_LEN;
+
+ /* move va to start of packet data */
+ va += IGB_TS_HDR_LEN;
+ }
+
+ /* we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, IGB_RX_HDR_LEN);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+}
+
+/**
+ * igb_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool igb_cleanup_headers(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (unlikely((igb_test_staterr(rx_desc,
+ E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) {
+ struct net_device *netdev = rx_ring->netdev;
+ if (!(netdev->features & NETIF_F_RXALL)) {
+ dev_kfree_skb_any(skb);
+ return true;
+ }
+ }
+
+ /* place header in linear portion of buffer */
+ if (skb_is_nonlinear(skb))
+ igb_pull_tail(rx_ring, rx_desc, skb);
+
+ /* if skb_pad returns an error the skb was freed */
+ if (unlikely(skb->len < 60)) {
+ int pad_len = 60 - skb->len;
+
+ if (skb_pad(skb, pad_len))
+ return true;
+ __skb_put(skb, pad_len);
+ }
+
+ return false;
+}
+
+/**
+ * igb_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static void igb_process_skb_fields(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct net_device *dev = rx_ring->netdev;
+
+ igb_rx_hash(rx_ring, rx_desc, skb);
+
+ igb_rx_checksum(rx_ring, rx_desc, skb);
+
+ if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) &&
+ !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))
+ igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
+
+ if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
+ u16 vid;
+
+ if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
+ test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
+ vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+ else
+ vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+ }
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+}
+
+static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
+{
+ struct igb_ring *rx_ring = q_vector->rx.ring;
+ struct sk_buff *skb = rx_ring->skb;
+ unsigned int total_bytes = 0, total_packets = 0;
+ u16 cleaned_count = igb_desc_unused(rx_ring);
+
+ while (likely(total_packets < budget)) {
+ union e1000_adv_rx_desc *rx_desc;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+ if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD))
+ break;
+
+ /* This memory barrier is needed to keep us from reading
+ * any other fields out of the rx_desc until we know the
+ * RXD_STAT_DD bit is set
+ */
+ rmb();
+
+ /* retrieve a buffer from the ring */
+ skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);
+
+ /* exit if we failed to retrieve a buffer */
+ if (!skb)
+ break;
+
+ cleaned_count++;
+
+ /* fetch next buffer in frame if non-eop */
+ if (igb_is_non_eop(rx_ring, rx_desc))
+ continue;
+
+ /* verify the packet layout is correct */
+ if (igb_cleanup_headers(rx_ring, rx_desc, skb)) {
+ skb = NULL;
+ continue;
+ }
+
+ /* probably a little skewed due to removing CRC */
+ total_bytes += skb->len;
+
+ /* populate checksum, timestamp, VLAN, and protocol */
+ igb_process_skb_fields(rx_ring, rx_desc, skb);
+
+ napi_gro_receive(&q_vector->napi, skb);
+
+ /* reset skb pointer */
+ skb = NULL;
+
+ /* update budget accounting */
+ total_packets++;
+ }
+
+ /* place incomplete frames back on ring for completion */
+ rx_ring->skb = skb;
+
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.packets += total_packets;
+ rx_ring->rx_stats.bytes += total_bytes;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ q_vector->rx.total_packets += total_packets;
+ q_vector->rx.total_bytes += total_bytes;
+
+ if (cleaned_count)
+ igb_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ return total_packets < budget;
+}
+
+static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
+ struct igb_rx_buffer *bi)
+{
+ struct page *page = bi->page;
+ dma_addr_t dma;
+
+ /* since we are recycling buffers we should seldom need to alloc */
+ if (likely(page))
+ return true;
+
+ /* alloc new page for storage */
+ page = __skb_alloc_page(GFP_ATOMIC | __GFP_COLD, NULL);
+ if (unlikely(!page)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ /* map page for use */
+ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+
+ /* if mapping failed free memory back to system since
+ * there isn't much point in holding memory we can't use
+ */
+ if (dma_mapping_error(rx_ring->dev, dma)) {
+ __free_page(page);
+
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ bi->dma = dma;
+ bi->page = page;
+ bi->page_offset = 0;
+
+ return true;
+}
+
+/**
+ * igb_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_rx_buffer *bi;
+ u16 i = rx_ring->next_to_use;
+
+ /* nothing to do */
+ if (!cleaned_count)
+ return;
+
+ rx_desc = IGB_RX_DESC(rx_ring, i);
+ bi = &rx_ring->rx_buffer_info[i];
+ i -= rx_ring->count;
+
+ do {
+ if (!igb_alloc_mapped_page(rx_ring, bi))
+ break;
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
+
+ rx_desc++;
+ bi++;
+ i++;
+ if (unlikely(!i)) {
+ rx_desc = IGB_RX_DESC(rx_ring, 0);
+ bi = rx_ring->rx_buffer_info;
+ i -= rx_ring->count;
+ }
+
+ /* clear the hdr_addr for the next_to_use descriptor */
+ rx_desc->read.hdr_addr = 0;
+
+ cleaned_count--;
+ } while (cleaned_count);
+
+ i += rx_ring->count;
+
+ if (rx_ring->next_to_use != i) {
+ /* record the next descriptor to use */
+ rx_ring->next_to_use = i;
+
+ /* update next to alloc since we have filled the ring */
+ rx_ring->next_to_alloc = i;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(i, rx_ring->tail);
+ }
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return igb_mii_ioctl(netdev, ifr, cmd);
+ case SIOCGHWTSTAMP:
+ return igb_ptp_get_ts_config(netdev, ifr);
+ case SIOCSHWTSTAMP:
+ return igb_ptp_set_ts_config(netdev, ifr);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_read_word(adapter->pdev, reg, value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ if (pcie_capability_write_word(adapter->pdev, reg, *value))
+ return -E1000_ERR_CONFIG;
+
+ return 0;
+}
+
+static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+ bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX);
+
+ if (enable) {
+ /* enable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Disable CFI check */
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ wr32(E1000_RCTL, rctl);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+ }
+
+ igb_rlpml_set(adapter);
+}
+
+static int igb_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+
+ /* attempt to add filter to vlvf array */
+ igb_vlvf_set(adapter, vid, true, pf_id);
+
+ /* add the filter since PF can receive vlans w/o entry in vlvf */
+ igb_vfta_set(hw, vid, true);
+
+ set_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static int igb_vlan_rx_kill_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+ s32 err;
+
+ /* remove vlan from VLVF table array */
+ err = igb_vlvf_set(adapter, vid, false, pf_id);
+
+ /* if vid was not present in VLVF just remove it from table */
+ if (err)
+ igb_vfta_set(hw, vid, false);
+
+ clear_bit(vid, adapter->active_vlans);
+
+ return 0;
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+ u16 vid;
+
+ igb_vlan_mode(adapter->netdev, adapter->netdev->features);
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work
+ */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NIC's only allow 1000 gbps Full duplex
+ * and 100Mbps Full duplex for 100baseFx sfp
+ */
+ if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ case SPEED_10 + DUPLEX_FULL:
+ case SPEED_100 + DUPLEX_HALF:
+ goto err_inval;
+ default:
+ break;
+ }
+ }
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
+ return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ bool runtime)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl, status;
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ __igb_close(netdev, true);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ igb_setup_rctl(adapter);
+ igb_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ wr32(E1000_RCTL, rctl);
+ }
+
+ ctrl = rd32(E1000_CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Allow time for pending master requests to run */
+ igb_disable_pcie_master(hw);
+
+ wr32(E1000_WUC, E1000_WUC_PME_EN);
+ wr32(E1000_WUFC, wufc);
+ } else {
+ wr32(E1000_WUC, 0);
+ wr32(E1000_WUFC, 0);
+ }
+
+ *enable_wake = wufc || adapter->en_mng_pt;
+ if (!*enable_wake)
+ igb_power_down_link(adapter);
+ else
+ igb_power_up_link(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ igb_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int igb_suspend(struct device *dev)
+{
+ int retval;
+ bool wake;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ retval = __igb_shutdown(pdev, &wake, 0);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int igb_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ if (!pci_device_is_present(pdev))
+ return -ENODEV;
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "igb: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+
+ wr32(E1000_WUS, ~0);
+
+ if (netdev->flags & IFF_UP) {
+ rtnl_lock();
+ err = __igb_open(netdev, true);
+ rtnl_unlock();
+ if (err)
+ return err;
+ }
+
+ netif_device_attach(netdev);
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (!igb_has_link(adapter))
+ pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
+
+ return -EBUSY;
+}
+
+static int igb_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake, 1);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int igb_runtime_resume(struct device *dev)
+{
+ return igb_resume(dev);
+}
+#endif /* CONFIG_PM_RUNTIME */
+#endif
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __igb_shutdown(pdev, &wake, 0);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_PCI_IOV
+static int igb_sriov_reinit(struct pci_dev *dev)
+{
+ struct net_device *netdev = pci_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ rtnl_lock();
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+ else
+ igb_reset(adapter);
+
+ igb_clear_interrupt_scheme(adapter);
+
+ igb_init_queue_configuration(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ igb_open(netdev);
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+static int igb_pci_disable_sriov(struct pci_dev *dev)
+{
+ int err = igb_disable_sriov(dev);
+
+ if (!err)
+ err = igb_sriov_reinit(dev);
+
+ return err;
+}
+
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
+{
+ int err = igb_enable_sriov(dev, num_vfs);
+
+ if (err)
+ goto out;
+
+ err = igb_sriov_reinit(dev);
+ if (!err)
+ return num_vfs;
+
+out:
+ return err;
+}
+
+#endif
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+ if (num_vfs == 0)
+ return igb_pci_disable_sriov(dev);
+ else
+ return igb_pci_enable_sriov(dev, num_vfs);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_q_vector *q_vector;
+ int i;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (adapter->flags & IGB_FLAG_HAS_MSIX)
+ wr32(E1000_EIMC, q_vector->eims_value);
+ else
+ igb_irq_disable(adapter);
+ napi_schedule(&q_vector->napi);
+ }
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ **/
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ **/
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ pci_ers_result_t result;
+ int err;
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ err = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
+ err);
+ /* non-fatal, continue */
+ }
+
+ return result;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igb_up(adapter)) {
+ dev_err(&pdev->dev, "igb_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver.
+ */
+ igb_get_hw_control(adapter);
+}
+
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+ u8 qsel)
+{
+ u32 rar_low, rar_high;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+
+ if (hw->mac.type == e1000_82575)
+ rar_high |= E1000_RAH_POOL_1 * qsel;
+ else
+ rar_high |= E1000_RAH_POOL_1 << qsel;
+
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+static int igb_set_vf_mac(struct igb_adapter *adapter,
+ int vf, unsigned char *mac_addr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ /* VF MAC addresses start at end of receive addresses and moves
+ * towards the first, as a result a collision should not be possible
+ */
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+
+ memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+
+ igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+ return -EINVAL;
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+ dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+ dev_info(&adapter->pdev->dev,
+ "Reload the VF driver to make this change effective.");
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF MAC address has been set, but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before attempting to use the VF device.\n");
+ }
+ return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_link_mbps(int internal_link_speed)
+{
+ switch (internal_link_speed) {
+ case SPEED_100:
+ return 100;
+ case SPEED_1000:
+ return 1000;
+ default:
+ return 0;
+ }
+}
+
+static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
+ int link_speed)
+{
+ int rf_dec, rf_int;
+ u32 bcnrc_val;
+
+ if (tx_rate != 0) {
+ /* Calculate the rate factor values to set */
+ rf_int = link_speed / tx_rate;
+ rf_dec = (link_speed - (rf_int * tx_rate));
+ rf_dec = (rf_dec * (1 << E1000_RTTBCNRC_RF_INT_SHIFT)) /
+ tx_rate;
+
+ bcnrc_val = E1000_RTTBCNRC_RS_ENA;
+ bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) &
+ E1000_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
+ } else {
+ bcnrc_val = 0;
+ }
+
+ wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
+ /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
+ * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
+ */
+ wr32(E1000_RTTBCNRM, 0x14);
+ wr32(E1000_RTTBCNRC, bcnrc_val);
+}
+
+static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
+{
+ int actual_link_speed, i;
+ bool reset_rate = false;
+
+ /* VF TX rate limit was not set or not supported */
+ if ((adapter->vf_rate_link_speed == 0) ||
+ (adapter->hw.mac.type != e1000_82576))
+ return;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if (actual_link_speed != adapter->vf_rate_link_speed) {
+ reset_rate = true;
+ adapter->vf_rate_link_speed = 0;
+ dev_info(&adapter->pdev->dev,
+ "Link speed has been changed. VF Transmit rate is disabled\n");
+ }
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ if (reset_rate)
+ adapter->vf_data[i].tx_rate = 0;
+
+ igb_set_vf_rate_limit(&adapter->hw, i,
+ adapter->vf_data[i].tx_rate,
+ actual_link_speed);
+ }
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
+ int min_tx_rate, int max_tx_rate)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int actual_link_speed;
+
+ if (hw->mac.type != e1000_82576)
+ return -EOPNOTSUPP;
+
+ if (min_tx_rate)
+ return -EINVAL;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if ((vf >= adapter->vfs_allocated_count) ||
+ (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
+ (max_tx_rate < 0) ||
+ (max_tx_rate > actual_link_speed))
+ return -EINVAL;
+
+ adapter->vf_rate_link_speed = actual_link_speed;
+ adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
+ igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
+ bool setting)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg_val, reg_offset;
+
+ if (!adapter->vfs_allocated_count)
+ return -EOPNOTSUPP;
+
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+
+ reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC;
+ reg_val = rd32(reg_offset);
+ if (setting)
+ reg_val |= ((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ else
+ reg_val &= ~((1 << vf) |
+ (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
+ wr32(reg_offset, reg_val);
+
+ adapter->vf_data[vf].spoofchk_enabled = setting;
+ return 0;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+ ivi->vf = vf;
+ memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+ ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
+ ivi->min_tx_rate = 0;
+ ivi->vlan = adapter->vf_data[vf].pf_vlan;
+ ivi->qos = adapter->vf_data[vf].pf_qos;
+ ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;
+ return 0;
+}
+
+static void igb_vmm_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_i210:
+ case e1000_i211:
+ case e1000_i354:
+ default:
+ /* replication is not supported for 82575 */
+ return;
+ case e1000_82576:
+ /* notify HW that the MAC is adding vlan tags */
+ reg = rd32(E1000_DTXCTL);
+ reg |= E1000_DTXCTL_VLAN_ADDED;
+ wr32(E1000_DTXCTL, reg);
+ /* Fall through */
+ case e1000_82580:
+ /* enable replication vlan tag stripping */
+ reg = rd32(E1000_RPLOLR);
+ reg |= E1000_RPLOLR_STRVLAN;
+ wr32(E1000_RPLOLR, reg);
+ /* Fall through */
+ case e1000_i350:
+ /* none of the above registers are supported by i350 */
+ break;
+ }
+
+ if (adapter->vfs_allocated_count) {
+ igb_vmdq_set_loopback_pf(hw, true);
+ igb_vmdq_set_replication_pf(hw, true);
+ igb_vmdq_set_anti_spoofing_pf(hw, true,
+ adapter->vfs_allocated_count);
+ } else {
+ igb_vmdq_set_loopback_pf(hw, false);
+ igb_vmdq_set_replication_pf(hw, false);
+ }
+}
+
+static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 dmac_thr;
+ u16 hwm;
+
+ if (hw->mac.type > e1000_82580) {
+ if (adapter->flags & IGB_FLAG_DMAC) {
+ u32 reg;
+
+ /* force threshold to 0. */
+ wr32(E1000_DMCTXTH, 0);
+
+ /* DMA Coalescing high water mark needs to be greater
+ * than the Rx threshold. Set hwm to PBA - max frame
+ * size in 16B units, capping it at PBA - 6KB.
+ */
+ hwm = 64 * pba - adapter->max_frame_size / 16;
+ if (hwm < 64 * (pba - 6))
+ hwm = 64 * (pba - 6);
+ reg = rd32(E1000_FCRTC);
+ reg &= ~E1000_FCRTC_RTH_COAL_MASK;
+ reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
+ & E1000_FCRTC_RTH_COAL_MASK);
+ wr32(E1000_FCRTC, reg);
+
+ /* Set the DMA Coalescing Rx threshold to PBA - 2 * max
+ * frame size, capping it at PBA - 10KB.
+ */
+ dmac_thr = pba - adapter->max_frame_size / 512;
+ if (dmac_thr < pba - 10)
+ dmac_thr = pba - 10;
+ reg = rd32(E1000_DMACR);
+ reg &= ~E1000_DMACR_DMACTHR_MASK;
+ reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
+ & E1000_DMACR_DMACTHR_MASK);
+
+ /* transition to L0x or L1 if available..*/
+ reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
+
+ /* watchdog timer= +-1000 usec in 32usec intervals */
+ reg |= (1000 >> 5);
+
+ /* Disable BMC-to-OS Watchdog Enable */
+ if (hw->mac.type != e1000_i354)
+ reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
+
+ wr32(E1000_DMACR, reg);
+
+ /* no lower threshold to disable
+ * coalescing(smart fifb)-UTRESH=0
+ */
+ wr32(E1000_DMCRTRH, 0);
+
+ reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
+
+ wr32(E1000_DMCTLX, reg);
+
+ /* free space in tx packet buffer to wake from
+ * DMA coal
+ */
+ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
+ (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
+
+ /* make low power state decision controlled
+ * by DMA coal
+ */
+ reg = rd32(E1000_PCIEMISC);
+ reg &= ~E1000_PCIEMISC_LX_DECISION;
+ wr32(E1000_PCIEMISC, reg);
+ } /* endif adapter->dmac is not disabled */
+ } else if (hw->mac.type == e1000_82580) {
+ u32 reg = rd32(E1000_PCIEMISC);
+
+ wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
+ wr32(E1000_DMACR, 0);
+ }
+}
+
+/**
+ * igb_read_i2c_byte - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @dev_addr: device address
+ * @data: value read
+ *
+ * Performs byte read operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = 0;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+
+ status = i2c_smbus_read_byte_data(this_client, byte_offset);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status < 0)
+ return E1000_ERR_I2C;
+ else {
+ *data = status;
+ return 0;
+ }
+}
+
+/**
+ * igb_write_i2c_byte - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @dev_addr: device address
+ * @data: value to write
+ *
+ * Performs byte write operation over I2C interface at
+ * a specified device address.
+ **/
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+ struct i2c_client *this_client = adapter->i2c_client;
+ s32 status;
+ u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+ if (!this_client)
+ return E1000_ERR_I2C;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return E1000_ERR_SWFW_SYNC;
+ status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ if (status)
+ return E1000_ERR_I2C;
+ else
+ return 0;
+
+}
+
+int igb_reinit_queues(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+
+ igb_reset_interrupt_capability(adapter);
+
+ if (igb_init_interrupt_scheme(adapter, true)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ if (netif_running(netdev))
+ err = igb_open(netdev);
+
+ return err;
+}
+/* igb_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_ptp-3.18-ethercat.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,944 @@
+/* PTP Hardware Clock (PHC) driver for the Intel 82576 and 82580
+ *
+ * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/ptp_classify.h>
+
+#include "igb-3.18-ethercat.h"
+
+#define INCVALUE_MASK 0x7fffffff
+#define ISGN 0x80000000
+
+/* The 82580 timesync updates the system timer every 8ns by 8ns,
+ * and this update value cannot be reprogrammed.
+ *
+ * Neither the 82576 nor the 82580 offer registers wide enough to hold
+ * nanoseconds time values for very long. For the 82580, SYSTIM always
+ * counts nanoseconds, but the upper 24 bits are not availible. The
+ * frequency is adjusted by changing the 32 bit fractional nanoseconds
+ * register, TIMINCA.
+ *
+ * For the 82576, the SYSTIM register time unit is affect by the
+ * choice of the 24 bit TININCA:IV (incvalue) field. Five bits of this
+ * field are needed to provide the nominal 16 nanosecond period,
+ * leaving 19 bits for fractional nanoseconds.
+ *
+ * We scale the NIC clock cycle by a large factor so that relatively
+ * small clock corrections can be added or subtracted at each clock
+ * tick. The drawbacks of a large factor are a) that the clock
+ * register overflows more quickly (not such a big deal) and b) that
+ * the increment per tick has to fit into 24 bits. As a result we
+ * need to use a shift of 19 so we can fit a value of 16 into the
+ * TIMINCA register.
+ *
+ *
+ * SYSTIMH SYSTIML
+ * +--------------+ +---+---+------+
+ * 82576 | 32 | | 8 | 5 | 19 |
+ * +--------------+ +---+---+------+
+ * \________ 45 bits _______/ fract
+ *
+ * +----------+---+ +--------------+
+ * 82580 | 24 | 8 | | 32 |
+ * +----------+---+ +--------------+
+ * reserved \______ 40 bits _____/
+ *
+ *
+ * The 45 bit 82576 SYSTIM overflows every
+ * 2^45 * 10^-9 / 3600 = 9.77 hours.
+ *
+ * The 40 bit 82580 SYSTIM overflows every
+ * 2^40 * 10^-9 / 60 = 18.3 minutes.
+ */
+
+#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9)
+#define IGB_PTP_TX_TIMEOUT (HZ * 15)
+#define INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT)
+#define INCVALUE_82576_MASK ((1 << E1000_TIMINCA_16NS_SHIFT) - 1)
+#define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT)
+#define IGB_NBITS_82580 40
+
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
+
+/* SYSTIM read access for the 82576 */
+static cycle_t igb_ptp_read_82576(const struct cyclecounter *cc)
+{
+ struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc);
+ struct e1000_hw *hw = &igb->hw;
+ u64 val;
+ u32 lo, hi;
+
+ lo = rd32(E1000_SYSTIML);
+ hi = rd32(E1000_SYSTIMH);
+
+ val = ((u64) hi) << 32;
+ val |= lo;
+
+ return val;
+}
+
+/* SYSTIM read access for the 82580 */
+static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc)
+{
+ struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc);
+ struct e1000_hw *hw = &igb->hw;
+ u32 lo, hi;
+ u64 val;
+
+ /* The timestamp latches on lowest register read. For the 82580
+ * the lowest register is SYSTIMR instead of SYSTIML. However we only
+ * need to provide nanosecond resolution, so we just ignore it.
+ */
+ rd32(E1000_SYSTIMR);
+ lo = rd32(E1000_SYSTIML);
+ hi = rd32(E1000_SYSTIMH);
+
+ val = ((u64) hi) << 32;
+ val |= lo;
+
+ return val;
+}
+
+/* SYSTIM read access for I210/I211 */
+static void igb_ptp_read_i210(struct igb_adapter *adapter, struct timespec *ts)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 sec, nsec;
+
+ /* The timestamp latches on lowest register read. For I210/I211, the
+ * lowest register is SYSTIMR. Since we only need to provide nanosecond
+ * resolution, we can ignore it.
+ */
+ rd32(E1000_SYSTIMR);
+ nsec = rd32(E1000_SYSTIML);
+ sec = rd32(E1000_SYSTIMH);
+
+ ts->tv_sec = sec;
+ ts->tv_nsec = nsec;
+}
+
+static void igb_ptp_write_i210(struct igb_adapter *adapter,
+ const struct timespec *ts)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Writing the SYSTIMR register is not necessary as it only provides
+ * sub-nanosecond resolution.
+ */
+ wr32(E1000_SYSTIML, ts->tv_nsec);
+ wr32(E1000_SYSTIMH, ts->tv_sec);
+}
+
+/**
+ * igb_ptp_systim_to_hwtstamp - convert system time value to hw timestamp
+ * @adapter: board private structure
+ * @hwtstamps: timestamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions.
+ *
+ * The 'tmreg_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two (or three) 32 bit registers. The first
+ * read latches the value. Ditto for writing.
+ *
+ * In addition, here have extended the system time with an overflow
+ * counter in software.
+ **/
+static void igb_ptp_systim_to_hwtstamp(struct igb_adapter *adapter,
+ struct skb_shared_hwtstamps *hwtstamps,
+ u64 systim)
+{
+ unsigned long flags;
+ u64 ns;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ spin_lock_irqsave(&adapter->tmreg_lock, flags);
+
+ ns = timecounter_cyc2time(&adapter->tc, systim);
+
+ spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ hwtstamps->hwtstamp = ns_to_ktime(ns);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ /* Upper 32 bits contain s, lower 32 bits contain ns. */
+ hwtstamps->hwtstamp = ktime_set(systim >> 32,
+ systim & 0xFFFFFFFF);
+ break;
+ default:
+ break;
+ }
+}
+
+/* PTP clock operations */
+static int igb_ptp_adjfreq_82576(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ struct e1000_hw *hw = &igb->hw;
+ int neg_adj = 0;
+ u64 rate;
+ u32 incvalue;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate = ppb;
+ rate <<= 14;
+ rate = div_u64(rate, 1953125);
+
+ incvalue = 16 << IGB_82576_TSYNC_SHIFT;
+
+ if (neg_adj)
+ incvalue -= rate;
+ else
+ incvalue += rate;
+
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | (incvalue & INCVALUE_82576_MASK));
+
+ return 0;
+}
+
+static int igb_ptp_adjfreq_82580(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ struct e1000_hw *hw = &igb->hw;
+ int neg_adj = 0;
+ u64 rate;
+ u32 inca;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate = ppb;
+ rate <<= 26;
+ rate = div_u64(rate, 1953125);
+
+ inca = rate & INCVALUE_MASK;
+ if (neg_adj)
+ inca |= ISGN;
+
+ wr32(E1000_TIMINCA, inca);
+
+ return 0;
+}
+
+static int igb_ptp_adjtime_82576(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ s64 now;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ now = timecounter_read(&igb->tc);
+ now += delta;
+ timecounter_init(&igb->tc, &igb->cc, now);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_adjtime_i210(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ struct timespec now, then = ns_to_timespec(delta);
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_read_i210(igb, &now);
+ now = timespec_add(now, then);
+ igb_ptp_write_i210(igb, (const struct timespec *)&now);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_gettime_82576(struct ptp_clock_info *ptp,
+ struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ u64 ns;
+ u32 remainder;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ ns = timecounter_read(&igb->tc);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
+ ts->tv_nsec = remainder;
+
+ return 0;
+}
+
+static int igb_ptp_gettime_i210(struct ptp_clock_info *ptp,
+ struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_read_i210(igb, ts);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_settime_82576(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ u64 ns;
+
+ ns = ts->tv_sec * 1000000000ULL;
+ ns += ts->tv_nsec;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ timecounter_init(&igb->tc, &igb->cc, ns);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_settime_i210(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_write_i210(igb, ts);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_feature_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * igb_ptp_tx_work
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb.
+ **/
+static void igb_ptp_tx_work(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work, struct igb_adapter,
+ ptp_tx_work);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsynctxctl;
+
+ if (!adapter->ptp_tx_skb)
+ return;
+
+ if (time_is_before_jiffies(adapter->ptp_tx_start +
+ IGB_PTP_TX_TIMEOUT)) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+ adapter->tx_hwtstamp_timeouts++;
+ dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang\n");
+ return;
+ }
+
+ tsynctxctl = rd32(E1000_TSYNCTXCTL);
+ if (tsynctxctl & E1000_TSYNCTXCTL_VALID)
+ igb_ptp_tx_hwtstamp(adapter);
+ else
+ /* reschedule to check later */
+ schedule_work(&adapter->ptp_tx_work);
+}
+
+static void igb_ptp_overflow_check(struct work_struct *work)
+{
+ struct igb_adapter *igb =
+ container_of(work, struct igb_adapter, ptp_overflow_work.work);
+ struct timespec ts;
+
+ igb->ptp_caps.gettime(&igb->ptp_caps, &ts);
+
+ pr_debug("igb overflow check at %ld.%09lu\n", ts.tv_sec, ts.tv_nsec);
+
+ schedule_delayed_work(&igb->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
+}
+
+/**
+ * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * This watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ **/
+void igb_ptp_rx_hang(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
+ unsigned long rx_event;
+
+ if (hw->mac.type != e1000_82576)
+ return;
+
+ /* If we don't have a valid timestamp in the registers, just update the
+ * timeout counter and exit
+ */
+ if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) {
+ adapter->last_rx_ptp_check = jiffies;
+ return;
+ }
+
+ /* Determine the most recent watchdog or rx_timestamp event */
+ rx_event = adapter->last_rx_ptp_check;
+ if (time_after(adapter->last_rx_timestamp, rx_event))
+ rx_event = adapter->last_rx_timestamp;
+
+ /* Only need to read the high RXSTMP register to clear the lock */
+ if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+ rd32(E1000_RXSTMPH);
+ adapter->last_rx_ptp_check = jiffies;
+ adapter->rx_hwtstamp_cleared++;
+ dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang\n");
+ }
+}
+
+/**
+ * igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp
+ * @adapter: Board private structure.
+ *
+ * If we were asked to do hardware stamping and such a time stamp is
+ * available, then it must have been for this skb here because we only
+ * allow only one such packet into the queue.
+ **/
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 regval;
+
+ regval = rd32(E1000_TXSTMPL);
+ regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+ igb_ptp_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+ skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+}
+
+/**
+ * igb_ptp_rx_pktstamp - retrieve Rx per packet timestamp
+ * @q_vector: Pointer to interrupt specific structure
+ * @va: Pointer to address containing Rx buffer
+ * @skb: Buffer containing timestamp and packet
+ *
+ * This function is meant to retrieve a timestamp from the first buffer of an
+ * incoming frame. The value is stored in little endian format starting on
+ * byte 8.
+ **/
+void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector,
+ unsigned char *va,
+ struct sk_buff *skb)
+{
+ __le64 *regval = (__le64 *)va;
+
+ /* The timestamp is recorded in little endian format.
+ * DWORD: 0 1 2 3
+ * Field: Reserved Reserved SYSTIML SYSTIMH
+ */
+ igb_ptp_systim_to_hwtstamp(q_vector->adapter, skb_hwtstamps(skb),
+ le64_to_cpu(regval[1]));
+}
+
+/**
+ * igb_ptp_rx_rgtstamp - retrieve Rx timestamp stored in register
+ * @q_vector: Pointer to interrupt specific structure
+ * @skb: Buffer containing timestamp and packet
+ *
+ * This function is meant to retrieve a timestamp from the internal registers
+ * of the adapter and store it in the skb.
+ **/
+void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
+ struct sk_buff *skb)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ u64 regval;
+
+ /* If this bit is set, then the RX registers contain the time stamp. No
+ * other packet will be time stamped until we read these registers, so
+ * read the registers to make them available again. Because only one
+ * packet can be time stamped at a time, we know that the register
+ * values must belong to this one here and therefore we don't need to
+ * compare any of the additional attributes stored for it.
+ *
+ * If nothing went wrong, then it should have a shared tx_flags that we
+ * can turn into a skb_shared_hwtstamps.
+ */
+ if (!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+ return;
+
+ regval = rd32(E1000_RXSTMPL);
+ regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+
+ igb_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+
+ /* Update the last_rx_timestamp timer in order to enable watchdog check
+ * for error case of latched timestamp on a dropped packet.
+ */
+ adapter->last_rx_timestamp = jiffies;
+}
+
+/**
+ * igb_ptp_get_ts_config - get hardware time stamping config
+ * @netdev:
+ * @ifreq:
+ *
+ * Get the hwtstamp_config settings to return to the user. Rather than attempt
+ * to deconstruct the settings from the registers, just return a shadow copy
+ * of the last known settings.
+ **/
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config *config = &adapter->tstamp_config;
+
+ return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
+ -EFAULT : 0;
+}
+
+/**
+ * igb_ptp_set_timestamp_mode - setup hardware for timestamping
+ * @adapter: networking device structure
+ * @config: hwtstamp configuration
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't case any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ */
+static int igb_ptp_set_timestamp_mode(struct igb_adapter *adapter,
+ struct hwtstamp_config *config)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+ u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 tsync_rx_cfg = 0;
+ bool is_l4 = false;
+ bool is_l2 = false;
+ u32 regval;
+
+ /* reserved for future extensions */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ tsync_tx_ctl = 0;
+ case HWTSTAMP_TX_ON:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ tsync_rx_ctl = 0;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ is_l2 = true;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_ALL:
+ /* 82576 cannot timestamp all packets, which it needs to do to
+ * support both V1 Sync and Delay_Req messages
+ */
+ if (hw->mac.type != e1000_82576) {
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ }
+ /* fall through */
+ default:
+ config->rx_filter = HWTSTAMP_FILTER_NONE;
+ return -ERANGE;
+ }
+
+ if (hw->mac.type == e1000_82575) {
+ if (tsync_rx_ctl | tsync_tx_ctl)
+ return -EINVAL;
+ return 0;
+ }
+
+ /* Per-packet timestamping only works if all packets are
+ * timestamped, so enable timestamping in all packets as
+ * long as one Rx filter was configured.
+ */
+ if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
+ tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ is_l2 = true;
+ is_l4 = true;
+
+ if ((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211)) {
+ regval = rd32(E1000_RXPBS);
+ regval |= E1000_RXPBS_CFG_TS_EN;
+ wr32(E1000_RXPBS, regval);
+ }
+ }
+
+ /* enable/disable TX */
+ regval = rd32(E1000_TSYNCTXCTL);
+ regval &= ~E1000_TSYNCTXCTL_ENABLED;
+ regval |= tsync_tx_ctl;
+ wr32(E1000_TSYNCTXCTL, regval);
+
+ /* enable/disable RX */
+ regval = rd32(E1000_TSYNCRXCTL);
+ regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+ regval |= tsync_rx_ctl;
+ wr32(E1000_TSYNCRXCTL, regval);
+
+ /* define which PTP packets are time stamped */
+ wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
+
+ /* define ethertype filter for timestamped packets */
+ if (is_l2)
+ wr32(E1000_ETQF(3),
+ (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+ E1000_ETQF_1588 | /* enable timestamping */
+ ETH_P_1588)); /* 1588 eth protocol type */
+ else
+ wr32(E1000_ETQF(3), 0);
+
+ /* L4 Queue Filter[3]: filter by destination port and protocol */
+ if (is_l4) {
+ u32 ftqf = (IPPROTO_UDP /* UDP */
+ | E1000_FTQF_VF_BP /* VF not compared */
+ | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+ | E1000_FTQF_MASK); /* mask all inputs */
+ ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
+
+ wr32(E1000_IMIR(3), htons(PTP_EV_PORT));
+ wr32(E1000_IMIREXT(3),
+ (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+ if (hw->mac.type == e1000_82576) {
+ /* enable source port check */
+ wr32(E1000_SPQF(3), htons(PTP_EV_PORT));
+ ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+ }
+ wr32(E1000_FTQF(3), ftqf);
+ } else {
+ wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+ }
+ wrfl();
+
+ /* clear TX/RX time stamp registers, just to be sure */
+ regval = rd32(E1000_TXSTMPL);
+ regval = rd32(E1000_TXSTMPH);
+ regval = rd32(E1000_RXSTMPL);
+ regval = rd32(E1000_RXSTMPH);
+
+ return 0;
+}
+
+/**
+ * igb_ptp_set_ts_config - set hardware time stamping config
+ * @netdev:
+ * @ifreq:
+ *
+ **/
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config config;
+ int err;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ err = igb_ptp_set_timestamp_mode(adapter, &config);
+ if (err)
+ return err;
+
+ /* save these settings for future reference */
+ memcpy(&adapter->tstamp_config, &config,
+ sizeof(adapter->tstamp_config));
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+void igb_ptp_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 999999881;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
+ adapter->ptp_caps.settime = igb_ptp_settime_82576;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ adapter->cc.read = igb_ptp_read_82576;
+ adapter->cc.mask = CLOCKSOURCE_MASK(64);
+ adapter->cc.mult = 1;
+ adapter->cc.shift = IGB_82576_TSYNC_SHIFT;
+ /* Dial the nominal frequency. */
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
+ break;
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 62499999;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
+ adapter->ptp_caps.settime = igb_ptp_settime_82576;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ adapter->cc.read = igb_ptp_read_82580;
+ adapter->cc.mask = CLOCKSOURCE_MASK(IGB_NBITS_82580);
+ adapter->cc.mult = 1;
+ adapter->cc.shift = 0;
+ /* Enable the timer functions by clearing bit 31. */
+ wr32(E1000_TSAUXC, 0x0);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 62499999;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_i210;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_i210;
+ adapter->ptp_caps.settime = igb_ptp_settime_i210;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ /* Enable the timer functions by clearing bit 31. */
+ wr32(E1000_TSAUXC, 0x0);
+ break;
+ default:
+ adapter->ptp_clock = NULL;
+ return;
+ }
+
+ wrfl();
+
+ spin_lock_init(&adapter->tmreg_lock);
+ INIT_WORK(&adapter->ptp_tx_work, igb_ptp_tx_work);
+
+ /* Initialize the clock and overflow work for devices that need it. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
+ struct timespec ts = ktime_to_timespec(ktime_get_real());
+
+ igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
+ } else {
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+
+ INIT_DELAYED_WORK(&adapter->ptp_overflow_work,
+ igb_ptp_overflow_check);
+
+ schedule_delayed_work(&adapter->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
+ }
+
+ /* Initialize the time sync interrupts for devices that support it. */
+ if (hw->mac.type >= e1000_82580) {
+ wr32(E1000_TSIM, TSYNC_INTERRUPTS);
+ wr32(E1000_IMS, E1000_IMS_TS);
+ }
+
+ adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
+ adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+
+ adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
+ &adapter->pdev->dev);
+ if (IS_ERR(adapter->ptp_clock)) {
+ adapter->ptp_clock = NULL;
+ dev_err(&adapter->pdev->dev, "ptp_clock_register failed\n");
+ } else {
+ dev_info(&adapter->pdev->dev, "added PHC on %s\n",
+ adapter->netdev->name);
+ adapter->flags |= IGB_FLAG_PTP;
+ }
+}
+
+/**
+ * igb_ptp_stop - Disable PTP device and stop the overflow check.
+ * @adapter: Board private structure.
+ *
+ * This function stops the PTP support and cancels the delayed work.
+ **/
+void igb_ptp_stop(struct igb_adapter *adapter)
+{
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ cancel_delayed_work_sync(&adapter->ptp_overflow_work);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ /* No delayed work to cancel. */
+ break;
+ default:
+ return;
+ }
+
+ cancel_work_sync(&adapter->ptp_tx_work);
+ if (adapter->ptp_tx_skb) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+ }
+
+ if (adapter->ptp_clock) {
+ ptp_clock_unregister(adapter->ptp_clock);
+ dev_info(&adapter->pdev->dev, "removed PHC on %s\n",
+ adapter->netdev->name);
+ adapter->flags &= ~IGB_FLAG_PTP;
+ }
+}
+
+/**
+ * igb_ptp_reset - Re-enable the adapter for PTP following a reset.
+ * @adapter: Board private structure.
+ *
+ * This function handles the reset work required to re-enable the PTP device.
+ **/
+void igb_ptp_reset(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!(adapter->flags & IGB_FLAG_PTP))
+ return;
+
+ /* reset the tstamp_config */
+ igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* Dial the nominal frequency. */
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
+ break;
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ /* Enable the timer functions and interrupts. */
+ wr32(E1000_TSAUXC, 0x0);
+ wr32(E1000_TSIM, TSYNC_INTERRUPTS);
+ wr32(E1000_IMS, E1000_IMS_TS);
+ break;
+ default:
+ /* No work to do. */
+ return;
+ }
+
+ /* Re-initialize the timer. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
+ struct timespec ts = ktime_to_timespec(ktime_get_real());
+
+ igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
+ } else {
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/igb/igb_ptp-3.18-orig.c Fri Sep 08 14:39:38 2017 +0200
@@ -0,0 +1,944 @@
+/* PTP Hardware Clock (PHC) driver for the Intel 82576 and 82580
+ *
+ * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/ptp_classify.h>
+
+#include "igb.h"
+
+#define INCVALUE_MASK 0x7fffffff
+#define ISGN 0x80000000
+
+/* The 82580 timesync updates the system timer every 8ns by 8ns,
+ * and this update value cannot be reprogrammed.
+ *
+ * Neither the 82576 nor the 82580 offer registers wide enough to hold
+ * nanoseconds time values for very long. For the 82580, SYSTIM always
+ * counts nanoseconds, but the upper 24 bits are not availible. The
+ * frequency is adjusted by changing the 32 bit fractional nanoseconds
+ * register, TIMINCA.
+ *
+ * For the 82576, the SYSTIM register time unit is affect by the
+ * choice of the 24 bit TININCA:IV (incvalue) field. Five bits of this
+ * field are needed to provide the nominal 16 nanosecond period,
+ * leaving 19 bits for fractional nanoseconds.
+ *
+ * We scale the NIC clock cycle by a large factor so that relatively
+ * small clock corrections can be added or subtracted at each clock
+ * tick. The drawbacks of a large factor are a) that the clock
+ * register overflows more quickly (not such a big deal) and b) that
+ * the increment per tick has to fit into 24 bits. As a result we
+ * need to use a shift of 19 so we can fit a value of 16 into the
+ * TIMINCA register.
+ *
+ *
+ * SYSTIMH SYSTIML
+ * +--------------+ +---+---+------+
+ * 82576 | 32 | | 8 | 5 | 19 |
+ * +--------------+ +---+---+------+
+ * \________ 45 bits _______/ fract
+ *
+ * +----------+---+ +--------------+
+ * 82580 | 24 | 8 | | 32 |
+ * +----------+---+ +--------------+
+ * reserved \______ 40 bits _____/
+ *
+ *
+ * The 45 bit 82576 SYSTIM overflows every
+ * 2^45 * 10^-9 / 3600 = 9.77 hours.
+ *
+ * The 40 bit 82580 SYSTIM overflows every
+ * 2^40 * 10^-9 / 60 = 18.3 minutes.
+ */
+
+#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 9)
+#define IGB_PTP_TX_TIMEOUT (HZ * 15)
+#define INCPERIOD_82576 (1 << E1000_TIMINCA_16NS_SHIFT)
+#define INCVALUE_82576_MASK ((1 << E1000_TIMINCA_16NS_SHIFT) - 1)
+#define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT)
+#define IGB_NBITS_82580 40
+
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
+
+/* SYSTIM read access for the 82576 */
+static cycle_t igb_ptp_read_82576(const struct cyclecounter *cc)
+{
+ struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc);
+ struct e1000_hw *hw = &igb->hw;
+ u64 val;
+ u32 lo, hi;
+
+ lo = rd32(E1000_SYSTIML);
+ hi = rd32(E1000_SYSTIMH);
+
+ val = ((u64) hi) << 32;
+ val |= lo;
+
+ return val;
+}
+
+/* SYSTIM read access for the 82580 */
+static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc)
+{
+ struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc);
+ struct e1000_hw *hw = &igb->hw;
+ u32 lo, hi;
+ u64 val;
+
+ /* The timestamp latches on lowest register read. For the 82580
+ * the lowest register is SYSTIMR instead of SYSTIML. However we only
+ * need to provide nanosecond resolution, so we just ignore it.
+ */
+ rd32(E1000_SYSTIMR);
+ lo = rd32(E1000_SYSTIML);
+ hi = rd32(E1000_SYSTIMH);
+
+ val = ((u64) hi) << 32;
+ val |= lo;
+
+ return val;
+}
+
+/* SYSTIM read access for I210/I211 */
+static void igb_ptp_read_i210(struct igb_adapter *adapter, struct timespec *ts)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 sec, nsec;
+
+ /* The timestamp latches on lowest register read. For I210/I211, the
+ * lowest register is SYSTIMR. Since we only need to provide nanosecond
+ * resolution, we can ignore it.
+ */
+ rd32(E1000_SYSTIMR);
+ nsec = rd32(E1000_SYSTIML);
+ sec = rd32(E1000_SYSTIMH);
+
+ ts->tv_sec = sec;
+ ts->tv_nsec = nsec;
+}
+
+static void igb_ptp_write_i210(struct igb_adapter *adapter,
+ const struct timespec *ts)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Writing the SYSTIMR register is not necessary as it only provides
+ * sub-nanosecond resolution.
+ */
+ wr32(E1000_SYSTIML, ts->tv_nsec);
+ wr32(E1000_SYSTIMH, ts->tv_sec);
+}
+
+/**
+ * igb_ptp_systim_to_hwtstamp - convert system time value to hw timestamp
+ * @adapter: board private structure
+ * @hwtstamps: timestamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions.
+ *
+ * The 'tmreg_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two (or three) 32 bit registers. The first
+ * read latches the value. Ditto for writing.
+ *
+ * In addition, here have extended the system time with an overflow
+ * counter in software.
+ **/
+static void igb_ptp_systim_to_hwtstamp(struct igb_adapter *adapter,
+ struct skb_shared_hwtstamps *hwtstamps,
+ u64 systim)
+{
+ unsigned long flags;
+ u64 ns;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ spin_lock_irqsave(&adapter->tmreg_lock, flags);
+
+ ns = timecounter_cyc2time(&adapter->tc, systim);
+
+ spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ hwtstamps->hwtstamp = ns_to_ktime(ns);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ /* Upper 32 bits contain s, lower 32 bits contain ns. */
+ hwtstamps->hwtstamp = ktime_set(systim >> 32,
+ systim & 0xFFFFFFFF);
+ break;
+ default:
+ break;
+ }
+}
+
+/* PTP clock operations */
+static int igb_ptp_adjfreq_82576(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ struct e1000_hw *hw = &igb->hw;
+ int neg_adj = 0;
+ u64 rate;
+ u32 incvalue;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate = ppb;
+ rate <<= 14;
+ rate = div_u64(rate, 1953125);
+
+ incvalue = 16 << IGB_82576_TSYNC_SHIFT;
+
+ if (neg_adj)
+ incvalue -= rate;
+ else
+ incvalue += rate;
+
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | (incvalue & INCVALUE_82576_MASK));
+
+ return 0;
+}
+
+static int igb_ptp_adjfreq_82580(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ struct e1000_hw *hw = &igb->hw;
+ int neg_adj = 0;
+ u64 rate;
+ u32 inca;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate = ppb;
+ rate <<= 26;
+ rate = div_u64(rate, 1953125);
+
+ inca = rate & INCVALUE_MASK;
+ if (neg_adj)
+ inca |= ISGN;
+
+ wr32(E1000_TIMINCA, inca);
+
+ return 0;
+}
+
+static int igb_ptp_adjtime_82576(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ s64 now;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ now = timecounter_read(&igb->tc);
+ now += delta;
+ timecounter_init(&igb->tc, &igb->cc, now);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_adjtime_i210(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ struct timespec now, then = ns_to_timespec(delta);
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_read_i210(igb, &now);
+ now = timespec_add(now, then);
+ igb_ptp_write_i210(igb, (const struct timespec *)&now);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_gettime_82576(struct ptp_clock_info *ptp,
+ struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ u64 ns;
+ u32 remainder;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ ns = timecounter_read(&igb->tc);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
+ ts->tv_nsec = remainder;
+
+ return 0;
+}
+
+static int igb_ptp_gettime_i210(struct ptp_clock_info *ptp,
+ struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_read_i210(igb, ts);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_settime_82576(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+ u64 ns;
+
+ ns = ts->tv_sec * 1000000000ULL;
+ ns += ts->tv_nsec;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ timecounter_init(&igb->tc, &igb->cc, ns);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_settime_i210(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct igb_adapter *igb = container_of(ptp, struct igb_adapter,
+ ptp_caps);
+ unsigned long flags;
+
+ spin_lock_irqsave(&igb->tmreg_lock, flags);
+
+ igb_ptp_write_i210(igb, ts);
+
+ spin_unlock_irqrestore(&igb->tmreg_lock, flags);
+
+ return 0;
+}
+
+static int igb_ptp_feature_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * igb_ptp_tx_work
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb.
+ **/
+static void igb_ptp_tx_work(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work, struct igb_adapter,
+ ptp_tx_work);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsynctxctl;
+
+ if (!adapter->ptp_tx_skb)
+ return;
+
+ if (time_is_before_jiffies(adapter->ptp_tx_start +
+ IGB_PTP_TX_TIMEOUT)) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+ adapter->tx_hwtstamp_timeouts++;
+ dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang\n");
+ return;
+ }
+
+ tsynctxctl = rd32(E1000_TSYNCTXCTL);
+ if (tsynctxctl & E1000_TSYNCTXCTL_VALID)
+ igb_ptp_tx_hwtstamp(adapter);
+ else
+ /* reschedule to check later */
+ schedule_work(&adapter->ptp_tx_work);
+}
+
+static void igb_ptp_overflow_check(struct work_struct *work)
+{
+ struct igb_adapter *igb =
+ container_of(work, struct igb_adapter, ptp_overflow_work.work);
+ struct timespec ts;
+
+ igb->ptp_caps.gettime(&igb->ptp_caps, &ts);
+
+ pr_debug("igb overflow check at %ld.%09lu\n", ts.tv_sec, ts.tv_nsec);
+
+ schedule_delayed_work(&igb->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
+}
+
+/**
+ * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * This watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ **/
+void igb_ptp_rx_hang(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
+ unsigned long rx_event;
+
+ if (hw->mac.type != e1000_82576)
+ return;
+
+ /* If we don't have a valid timestamp in the registers, just update the
+ * timeout counter and exit
+ */
+ if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) {
+ adapter->last_rx_ptp_check = jiffies;
+ return;
+ }
+
+ /* Determine the most recent watchdog or rx_timestamp event */
+ rx_event = adapter->last_rx_ptp_check;
+ if (time_after(adapter->last_rx_timestamp, rx_event))
+ rx_event = adapter->last_rx_timestamp;
+
+ /* Only need to read the high RXSTMP register to clear the lock */
+ if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+ rd32(E1000_RXSTMPH);
+ adapter->last_rx_ptp_check = jiffies;
+ adapter->rx_hwtstamp_cleared++;
+ dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang\n");
+ }
+}
+
+/**
+ * igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp
+ * @adapter: Board private structure.
+ *
+ * If we were asked to do hardware stamping and such a time stamp is
+ * available, then it must have been for this skb here because we only
+ * allow only one such packet into the queue.
+ **/
+static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 regval;
+
+ regval = rd32(E1000_TXSTMPL);
+ regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+ igb_ptp_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+ skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+}
+
+/**
+ * igb_ptp_rx_pktstamp - retrieve Rx per packet timestamp
+ * @q_vector: Pointer to interrupt specific structure
+ * @va: Pointer to address containing Rx buffer
+ * @skb: Buffer containing timestamp and packet
+ *
+ * This function is meant to retrieve a timestamp from the first buffer of an
+ * incoming frame. The value is stored in little endian format starting on
+ * byte 8.
+ **/
+void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector,
+ unsigned char *va,
+ struct sk_buff *skb)
+{
+ __le64 *regval = (__le64 *)va;
+
+ /* The timestamp is recorded in little endian format.
+ * DWORD: 0 1 2 3
+ * Field: Reserved Reserved SYSTIML SYSTIMH
+ */
+ igb_ptp_systim_to_hwtstamp(q_vector->adapter, skb_hwtstamps(skb),
+ le64_to_cpu(regval[1]));
+}
+
+/**
+ * igb_ptp_rx_rgtstamp - retrieve Rx timestamp stored in register
+ * @q_vector: Pointer to interrupt specific structure
+ * @skb: Buffer containing timestamp and packet
+ *
+ * This function is meant to retrieve a timestamp from the internal registers
+ * of the adapter and store it in the skb.
+ **/
+void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
+ struct sk_buff *skb)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ u64 regval;
+
+ /* If this bit is set, then the RX registers contain the time stamp. No
+ * other packet will be time stamped until we read these registers, so
+ * read the registers to make them available again. Because only one
+ * packet can be time stamped at a time, we know that the register
+ * values must belong to this one here and therefore we don't need to
+ * compare any of the additional attributes stored for it.
+ *
+ * If nothing went wrong, then it should have a shared tx_flags that we
+ * can turn into a skb_shared_hwtstamps.
+ */
+ if (!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+ return;
+
+ regval = rd32(E1000_RXSTMPL);
+ regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+
+ igb_ptp_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+
+ /* Update the last_rx_timestamp timer in order to enable watchdog check
+ * for error case of latched timestamp on a dropped packet.
+ */
+ adapter->last_rx_timestamp = jiffies;
+}
+
+/**
+ * igb_ptp_get_ts_config - get hardware time stamping config
+ * @netdev:
+ * @ifreq:
+ *
+ * Get the hwtstamp_config settings to return to the user. Rather than attempt
+ * to deconstruct the settings from the registers, just return a shadow copy
+ * of the last known settings.
+ **/
+int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config *config = &adapter->tstamp_config;
+
+ return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
+ -EFAULT : 0;
+}
+
+/**
+ * igb_ptp_set_timestamp_mode - setup hardware for timestamping
+ * @adapter: networking device structure
+ * @config: hwtstamp configuration
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't case any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ */
+static int igb_ptp_set_timestamp_mode(struct igb_adapter *adapter,
+ struct hwtstamp_config *config)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+ u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 tsync_rx_cfg = 0;
+ bool is_l4 = false;
+ bool is_l2 = false;
+ u32 regval;
+
+ /* reserved for future extensions */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ tsync_tx_ctl = 0;
+ case HWTSTAMP_TX_ON:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ tsync_rx_ctl = 0;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ is_l2 = true;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_ALL:
+ /* 82576 cannot timestamp all packets, which it needs to do to
+ * support both V1 Sync and Delay_Req messages
+ */
+ if (hw->mac.type != e1000_82576) {
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ }
+ /* fall through */
+ default:
+ config->rx_filter = HWTSTAMP_FILTER_NONE;
+ return -ERANGE;
+ }
+
+ if (hw->mac.type == e1000_82575) {
+ if (tsync_rx_ctl | tsync_tx_ctl)
+ return -EINVAL;
+ return 0;
+ }
+
+ /* Per-packet timestamping only works if all packets are
+ * timestamped, so enable timestamping in all packets as
+ * long as one Rx filter was configured.
+ */
+ if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
+ tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ is_l2 = true;
+ is_l4 = true;
+
+ if ((hw->mac.type == e1000_i210) ||
+ (hw->mac.type == e1000_i211)) {
+ regval = rd32(E1000_RXPBS);
+ regval |= E1000_RXPBS_CFG_TS_EN;
+ wr32(E1000_RXPBS, regval);
+ }
+ }
+
+ /* enable/disable TX */
+ regval = rd32(E1000_TSYNCTXCTL);
+ regval &= ~E1000_TSYNCTXCTL_ENABLED;
+ regval |= tsync_tx_ctl;
+ wr32(E1000_TSYNCTXCTL, regval);
+
+ /* enable/disable RX */
+ regval = rd32(E1000_TSYNCRXCTL);
+ regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+ regval |= tsync_rx_ctl;
+ wr32(E1000_TSYNCRXCTL, regval);
+
+ /* define which PTP packets are time stamped */
+ wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
+
+ /* define ethertype filter for timestamped packets */
+ if (is_l2)
+ wr32(E1000_ETQF(3),
+ (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+ E1000_ETQF_1588 | /* enable timestamping */
+ ETH_P_1588)); /* 1588 eth protocol type */
+ else
+ wr32(E1000_ETQF(3), 0);
+
+ /* L4 Queue Filter[3]: filter by destination port and protocol */
+ if (is_l4) {
+ u32 ftqf = (IPPROTO_UDP /* UDP */
+ | E1000_FTQF_VF_BP /* VF not compared */
+ | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+ | E1000_FTQF_MASK); /* mask all inputs */
+ ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
+
+ wr32(E1000_IMIR(3), htons(PTP_EV_PORT));
+ wr32(E1000_IMIREXT(3),
+ (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+ if (hw->mac.type == e1000_82576) {
+ /* enable source port check */
+ wr32(E1000_SPQF(3), htons(PTP_EV_PORT));
+ ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+ }
+ wr32(E1000_FTQF(3), ftqf);
+ } else {
+ wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+ }
+ wrfl();
+
+ /* clear TX/RX time stamp registers, just to be sure */
+ regval = rd32(E1000_TXSTMPL);
+ regval = rd32(E1000_TXSTMPH);
+ regval = rd32(E1000_RXSTMPL);
+ regval = rd32(E1000_RXSTMPH);
+
+ return 0;
+}
+
+/**
+ * igb_ptp_set_ts_config - set hardware time stamping config
+ * @netdev:
+ * @ifreq:
+ *
+ **/
+int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config config;
+ int err;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ err = igb_ptp_set_timestamp_mode(adapter, &config);
+ if (err)
+ return err;
+
+ /* save these settings for future reference */
+ memcpy(&adapter->tstamp_config, &config,
+ sizeof(adapter->tstamp_config));
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+void igb_ptp_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 999999881;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
+ adapter->ptp_caps.settime = igb_ptp_settime_82576;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ adapter->cc.read = igb_ptp_read_82576;
+ adapter->cc.mask = CLOCKSOURCE_MASK(64);
+ adapter->cc.mult = 1;
+ adapter->cc.shift = IGB_82576_TSYNC_SHIFT;
+ /* Dial the nominal frequency. */
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
+ break;
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 62499999;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_82576;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_82576;
+ adapter->ptp_caps.settime = igb_ptp_settime_82576;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ adapter->cc.read = igb_ptp_read_82580;
+ adapter->cc.mask = CLOCKSOURCE_MASK(IGB_NBITS_82580);
+ adapter->cc.mult = 1;
+ adapter->cc.shift = 0;
+ /* Enable the timer functions by clearing bit 31. */
+ wr32(E1000_TSAUXC, 0x0);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 62499999;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82580;
+ adapter->ptp_caps.adjtime = igb_ptp_adjtime_i210;
+ adapter->ptp_caps.gettime = igb_ptp_gettime_i210;
+ adapter->ptp_caps.settime = igb_ptp_settime_i210;
+ adapter->ptp_caps.enable = igb_ptp_feature_enable;
+ /* Enable the timer functions by clearing bit 31. */
+ wr32(E1000_TSAUXC, 0x0);
+ break;
+ default:
+ adapter->ptp_clock = NULL;
+ return;
+ }
+
+ wrfl();
+
+ spin_lock_init(&adapter->tmreg_lock);
+ INIT_WORK(&adapter->ptp_tx_work, igb_ptp_tx_work);
+
+ /* Initialize the clock and overflow work for devices that need it. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
+ struct timespec ts = ktime_to_timespec(ktime_get_real());
+
+ igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
+ } else {
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+
+ INIT_DELAYED_WORK(&adapter->ptp_overflow_work,
+ igb_ptp_overflow_check);
+
+ schedule_delayed_work(&adapter->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
+ }
+
+ /* Initialize the time sync interrupts for devices that support it. */
+ if (hw->mac.type >= e1000_82580) {
+ wr32(E1000_TSIM, TSYNC_INTERRUPTS);
+ wr32(E1000_IMS, E1000_IMS_TS);
+ }
+
+ adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
+ adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+
+ adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
+ &adapter->pdev->dev);
+ if (IS_ERR(adapter->ptp_clock)) {
+ adapter->ptp_clock = NULL;
+ dev_err(&adapter->pdev->dev, "ptp_clock_register failed\n");
+ } else {
+ dev_info(&adapter->pdev->dev, "added PHC on %s\n",
+ adapter->netdev->name);
+ adapter->flags |= IGB_FLAG_PTP;
+ }
+}
+
+/**
+ * igb_ptp_stop - Disable PTP device and stop the overflow check.
+ * @adapter: Board private structure.
+ *
+ * This function stops the PTP support and cancels the delayed work.
+ **/
+void igb_ptp_stop(struct igb_adapter *adapter)
+{
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ cancel_delayed_work_sync(&adapter->ptp_overflow_work);
+ break;
+ case e1000_i210:
+ case e1000_i211:
+ /* No delayed work to cancel. */
+ break;
+ default:
+ return;
+ }
+
+ cancel_work_sync(&adapter->ptp_tx_work);
+ if (adapter->ptp_tx_skb) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ clear_bit_unlock(__IGB_PTP_TX_IN_PROGRESS, &adapter->state);
+ }
+
+ if (adapter->ptp_clock) {
+ ptp_clock_unregister(adapter->ptp_clock);
+ dev_info(&adapter->pdev->dev, "removed PHC on %s\n",
+ adapter->netdev->name);
+ adapter->flags &= ~IGB_FLAG_PTP;
+ }
+}
+
+/**
+ * igb_ptp_reset - Re-enable the adapter for PTP following a reset.
+ * @adapter: Board private structure.
+ *
+ * This function handles the reset work required to re-enable the PTP device.
+ **/
+void igb_ptp_reset(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!(adapter->flags & IGB_FLAG_PTP))
+ return;
+
+ /* reset the tstamp_config */
+ igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* Dial the nominal frequency. */
+ wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
+ break;
+ case e1000_82580:
+ case e1000_i354:
+ case e1000_i350:
+ case e1000_i210:
+ case e1000_i211:
+ /* Enable the timer functions and interrupts. */
+ wr32(E1000_TSAUXC, 0x0);
+ wr32(E1000_TSIM, TSYNC_INTERRUPTS);
+ wr32(E1000_IMS, E1000_IMS_TS);
+ break;
+ default:
+ /* No work to do. */
+ return;
+ }
+
+ /* Re-initialize the timer. */
+ if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
+ struct timespec ts = ktime_to_timespec(ktime_get_real());
+
+ igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
+ } else {
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+ }
+}