1

-------------------------------------------------------------------------------

     2

     3

$Id$

     4

     5

-------------------------------------------------------------------------------

     6

     7

Changes in version 1.3.0:

     8

     9

* Added testing version of Intel PRO/100 ethernet driver (e100).

    10

* Added testing version of NVIDIA nForce ethernet driver (forcedeth).

    11

* Removed "ec_eoeif_count" master module parameter. EoE handlers are created

    12

  dynamically instead.

    13

* Added "main" and "backup" parameters to master module to hand over the

    14

  MAC addresses of the devices to wait for. This made the ec_device_index

    15

  parameter of the ethernet drivers obsolete.

    16

* Changed format of sysconfig file and accordingly adjusted functionality

    17

  of the init script to handle the above MAC address lists.

    18

* Realtime interface changes:

    19

  - ecrt_master_run() became obsolete, because the master state machine is now

    20

    run in process context.

    21

  - Parameter changes in PDO registration functions ecrt_domain_register_pdo()

    22

    and ecrt_register_pdo_range(): Replaced slave_address, vendor ID and

    23

    product code arguments with a slave pointer, which has to be obtained with

    24

    a prior call to ecrt_master_get_slave().

    25

  - ecrt_master_get_slave() got additional parameters to check for vendor ID

    26

    and product code.

    27

  - Removed addressing scheme "X:Y" for ecrt_master_get_slave().

    28

  - Added ecrt_master_get_status() to get status information about the bus.

    29

  - Added functions to set up an alternative PDO mapping for a slave, i. e.

    30

    ec_slave_pdo_mapping_clear(), ec_slave_pdo_mapping_add() and

    31

    ec_slave_pdo_mapping().

    32

* Device interface changes:

    33

  - Replaced ecdev_register() and ecdev_unregister() with ecdev_offer() and

    34

    ecdev_withdraw(), respectively. The device modules now offer all their

    35

    devices to the master. The master then decides, which ones to register.

    36

* All EEPROM write operations from user space are now blocking until

    37

  writing has finished. Appropriate error codes are returned.

    38

* Implemented setting of the "Secondary slave address" (alias) via sysfs.

    39

* Implemented SDO reading in operation mode via sysfs.

    40

* Removed annoying eeprom_write_enable file. EEPROM writing always enabled.

    41

* Slave configuration is now done exclusively from the master thread. Removed

    42

  ec_master_sync_io(). Userspace threads are now waiting for events in the

    43

  state machine.

    44

* Master state machine scheduled with timeout if idle, otherwise is executed

    45

  as fast as possible (with schedule()).

    47

* Removed EtherCAT line comments from 8139too drivers.

    48

    49

-------------------------------------------------------------------------------

    50

    51

Changes in version 1.2.0:

    52

    53

* Serveral fixes of bugs and stability issues. Master should now run fine

    54

  with kernels 2.6.17 to 2.6.19.

    55

* Realtime interface changes:

    56

  - Re-introduced ecrt_domain_queue() to allow datagram queuing apart

    57

    from datagram processing. The queuing of a domain's datagrams is not

    58

    done in ecrt_domain_process() any more!

    59

  - Removed ecrt_master_deactivate(). Its functionality was moved into

    60

    ecrt_master_release().

    61

  - Removed ecrt_master_prepare(). Its functionality was moved into

    62

    ecrt_master_activate().

    63

  - Renamed ecdev_start() and ecdev_stop() to ecdev_open() and ecdev_close().

    64

    These two functions now take a pointer to ec_device_t as their arguments.

    65

  - The data_ptr parameter of ecrt_domain_register_pdo(),

    66

    ecrt_domain_register_pdo_list() and ecrt_domain_register_pdo_range() may

    67

    not be NULL any more.

    68

  - Removed ecrt_slave_pdo_size(). This function was deprecated long before.

    69

  - Introduced ECRT_VERSION_MAGIC macro and ecrt_version_magic() function.

    70

* Device interface changes:

    71

  - ec_isr_t was replaced by ec_pollfunc_t, the device driver has to supply

    72

    a poll function to call its ISR. This was introduced because some network

    73

    drivers' interrupt functions have different arguments.

    74

* State machines now try to re-send datagrams on datagram timeout.

    75

* New option -c of the lsec script, displays slave current consumptions and

    76

  remaining current.

    77

* Added frame counter in master info file.

    78

    79

-------------------------------------------------------------------------------

    80

    81

Changes in version 1.1.1:

    82

    83

* State change FSM: Clearing of sync managers before PREOP.

    84

* Added modules_install make target.

    85

* Device modules for kernel 2.6.17.

    86

* SDO configurations available in Sysfs.

    87

* FMMU configurations cleared when going to INIT.

    88

* Slave-specific logs only at debug level 1 (for large busses).

    89

* Slave flags (error, online) available in Sysfs.

    90

* Acknowledging of spontaneous state changes in master FSMs.

    91

* ecrt_master_deactivate() deprecated.

    92

* Persistent slave lists. Slave structures are only regenerated on topology

    93

  change in IDLE mode.

    94

* SDO reading via Sysfs.

    95

* Added ecrt_domain_register_pdo_range()

    96

* Fetching of SDO dictionary.

    97

* Better timing behaviour when starting up under high CPU load.

    98

* Applied Autotools.

    99

* Improved output of lsec.

   100

* SDO download state machine.

   101

   102

-------------------------------------------------------------------------------

   103

   104

Changes in version 1.1:

   105

   106

* Improved realtime interface.

   107

   108

-------------------------------------------------------------------------------