1

-------------------------------------------------------------------------------

     2

     3

$Id$

     4

     5

-------------------------------------------------------------------------------

     6

     7

Changes in version 1.3.0:

     8

     9

* Added testing version of Intel PRO/100 ethernet driver (e100).

    10

* Added testing version of NVIDIA nForce ethernet driver (forcedeth).

    11

* Removed "ec_eoeif_count" master module parameter.

    12

* Added "main" and "backup" parameters to master module to hand over the

    13

  MAC addresses of the devices to wait for. This made the ec_device_index

    14

  parameter of the ethercat drivers obsolete.

    15

* Changed format of sysconfig file and accordingly adjusted functionality

    16

  of the init script to handle MAC address lists.

    17

* Realtime interface changes:

    18

  - ecrt_master_run() became obsolete, because the master state machine is now

    19

    run in process context.

    20

  - Parameter changes in PDO registration functions ecrt_domain_register_pdo()

    21

    and ecrt_register_pdo_range(): Replaced slave_address, vendor ID and

    22

    product code arguments with a slave pointer, which has to be optained with

    23

    a prior call to ecrt_master_get_slave().

    24

  - ecrt_master_get_slave() got additional parameters to check for vendor ID

    25

    and product code.

    26

  - Removed addressing scheme "X:Y" for ecrt_master_get_slave().

    27

  - Added ecrt_master_get_status() to get information about the bus.

    28

  - Added functions to set up an alternative PDO mapping, i. e.

    29

    ec_slave_pdo_mapping_clear(), ec_slave_pdo_mapping_add() and

    30

    ec_slave_pdo_mapping().

    31

* Device interface changes:

    32

  - Replaced ecdev_register() and ecdev_unregister() with ecdev_offer() and

    33

    ecdev_withdraw(), respectively. The device modules now offer all their

    34

    devices to the master, which decides, which ones to register.

    35

* All EEPROM write operations from user space are now blocking until

    36

  writing has finished and return appropriate error codes.

    37

* Implemented setting of secondary slave address (alias) via sysfs.

    38

* Implemented SDO reading in operation mode via sysfs.

    39

* Removed annoying eeprom_write_enable file. EEPROM writing always enabled.

    40

* Master state machine scheduled with timeout if idle, otherwise is executed

    41

  as fast as possible (with schedule()).

    42

* Removed EtherCAT line comments from 8139too drivers.

    43

    44

-------------------------------------------------------------------------------

    45

    46

Changes in version 1.2.0:

    47

    48

* Serveral fixes of bugs and stability issues. Master should now run fine

    49

  with kernels 2.6.17 to 2.6.19.

    50

* Realtime interface changes:

    51

  - Re-introduced ecrt_domain_queue() to allow datagram queuing apart

    52

    from datagram processing. The queuing of a domain's datagrams is not

    53

    done in ecrt_domain_process() any more!

    54

  - Removed ecrt_master_deactivate(). Its functionality was moved into

    55

    ecrt_master_release().

    56

  - Removed ecrt_master_prepare(). Its functionality was moved into

    57

    ecrt_master_activate().

    58

  - Renamed ecdev_start() and ecdev_stop() to ecdev_open() and ecdev_close().

    59

    These two functions now take a pointer to ec_device_t as their arguments.

    60

  - The data_ptr parameter of ecrt_domain_register_pdo(),

    61

    ecrt_domain_register_pdo_list() and ecrt_domain_register_pdo_range() may

    62

    not be NULL any more.

    63

  - Removed ecrt_slave_pdo_size(). This function was deprecated long before.

    64

  - Introduced ECRT_VERSION_MAGIC macro and ecrt_version_magic() function.

    65

* Device interface changes:

    66

  - ec_isr_t was replaced by ec_pollfunc_t, the device driver has to supply

    67

    a poll function to call its ISR. This was introduced because some network

    68

    drivers' interrupt functions have different arguments.

    69

* State machines now try to re-send datagrams on datagram timeout.

    70

* New option -c of the lsec script, displays slave current consumptions and

    71

  remaining current.

    72

* Added frame counter in master info file.

    73

    74

-------------------------------------------------------------------------------

    75

    76

Changes in version 1.1.1:

    77

    78

* State change FSM: Clearing of sync managers before PREOP.

    79

* Added modules_install make target.

    80

* Device modules for kernel 2.6.17.

    81

* SDO configurations available in Sysfs.

    82

* FMMU configurations cleared when going to INIT.

    83

* Slave-specific logs only at debug level 1 (for large busses).

    84

* Slave flags (error, online) available in Sysfs.

    85

* Acknowledging of spontaneous state changes in master FSMs.

    86

* ecrt_master_deactivate() deprecated.

    87

* Persistent slave lists. Slave structures are only regenerated on topology

    88

  change in IDLE mode.

    89

* SDO reading via Sysfs.

    90

* Added ecrt_domain_register_pdo_range()

    91

* Fetching of SDO dictionary.

    92

* Better timing behaviour when starting up under high CPU load.

    93

* Applied Autotools.

    94

* Improved output of lsec.

    95

* SDO download state machine.

    96

    97

-------------------------------------------------------------------------------

    98

    99

Changes in version 1.1:

   100

   101

* Improved realtime interface.

   102

   103

-------------------------------------------------------------------------------