1

/******************************************************************************

     2

 *

     3

 *  $Id$

     4

 *

     5

 *  Copyright (C) 2006-2008  Florian Pose, Ingenieurgemeinschaft IgH

     6

 *

     7

 *  This file is part of the IgH EtherCAT Master.

     8

 *

     9

 *  The IgH EtherCAT Master is free software; you can redistribute it and/or

    10

 *  modify it under the terms of the GNU General Public License version 2, as

    11

 *  published by the Free Software Foundation.

    12

 *

    13

 *  The IgH EtherCAT Master is distributed in the hope that it will be useful,

    14

 *  but WITHOUT ANY WARRANTY; without even the implied warranty of

    15

 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General

    16

 *  Public License for more details.

    17

 *

    18

 *  You should have received a copy of the GNU General Public License along

    19

 *  with the IgH EtherCAT Master; if not, write to the Free Software

    20

 *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    21

 *

    22

 *  ---

    23

 *

    24

 *  The license mentioned above concerns the source code only. Using the

    25

 *  EtherCAT technology and brand is only permitted in compliance with the

    26

 *  industrial property and similar rights of Beckhoff Automation GmbH.

    27

 *

    28

 *****************************************************************************/

    29

    30

/**

    31

   \file

    32

   EtherCAT driver for RTL8139-compatible NICs.

    33

*/

    34

    35

/*****************************************************************************/

    36

    37

/*

    38

  Former documentation:

    39

    40

	8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.

    41

    42

	Maintained by Jeff Garzik <jgarzik@pobox.com>

    43

	Copyright 2000-2002 Jeff Garzik

    44

    45

	Much code comes from Donald Becker's rtl8139.c driver,

    46

	versions 1.13 and older.  This driver was originally based

    47

	on rtl8139.c version 1.07.  Header of rtl8139.c version 1.13:

    48

    49

	-----<snip>-----

    50

    51

        	Written 1997-2001 by Donald Becker.

    52

		This software may be used and distributed according to the

    53

		terms of the GNU General Public License (GPL), incorporated

    54

		herein by reference.  Drivers based on or derived from this

    55

		code fall under the GPL and must retain the authorship,

    56

		copyright and license notice.  This file is not a complete

    57

		program and may only be used when the entire operating

    58

		system is licensed under the GPL.

    59

    60

		This driver is for boards based on the RTL8129 and RTL8139

    61

		PCI ethernet chips.

    62

    63

		The author may be reached as becker@scyld.com, or C/O Scyld

    64

		Computing Corporation 410 Severn Ave., Suite 210 Annapolis

    65

		MD 21403

    66

    67

		Support and updates available at

    68

		http://www.scyld.com/network/rtl8139.html

    69

    70

		Twister-tuning table provided by Kinston

    71

		<shangh@realtek.com.tw>.

    72

    73

	-----<snip>-----

    74

    75

	This software may be used and distributed according to the terms

    76

	of the GNU General Public License, incorporated herein by reference.

    77

    78

	Contributors:

    79

    80

		Donald Becker - he wrote the original driver, kudos to him!

    81

		(but please don't e-mail him for support, this isn't his driver)

    82

    83

		Tigran Aivazian - bug fixes, skbuff free cleanup

    84

    85

		Martin Mares - suggestions for PCI cleanup

    86

    87

		David S. Miller - PCI DMA and softnet updates

    88

    89

		Ernst Gill - fixes ported from BSD driver

    90

    91

		Daniel Kobras - identified specific locations of

    92

			posted MMIO write bugginess

    93

    94

		Gerard Sharp - bug fix, testing and feedback

    95

    96

		David Ford - Rx ring wrap fix

    97

    98

		Dan DeMaggio - swapped RTL8139 cards with me, and allowed me

    99

		to find and fix a crucial bug on older chipsets.

   100

   101

		Donald Becker/Chris Butterworth/Marcus Westergren -

   102

		Noticed various Rx packet size-related buglets.

   103

   104

		Santiago Garcia Mantinan - testing and feedback

   105

   106

		Jens David - 2.2.x kernel backports

   107

   108

		Martin Dennett - incredibly helpful insight on undocumented

   109

		features of the 8139 chips

   110

   111

		Jean-Jacques Michel - bug fix

   112

   113

		Tobias Ringström - Rx interrupt status checking suggestion

   114

   115

		Andrew Morton - Clear blocked signals, avoid

   116

		buffer overrun setting current->comm.

   117

   118

		Kalle Olavi Niemitalo - Wake-on-LAN ioctls

   119

   120

		Robert Kuebel - Save kernel thread from dying on any signal.

   121

   122

	Submitting bug reports:

   123

   124

		"rtl8139-diag -mmmaaavvveefN" output

   125

		enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log

   126

   127

*/

   128

   129

#define DRV_NAME	"ec_8139too"

   130

#define DRV_VERSION	"0.9.27"

   131

   132

   133

#include <linux/config.h>

   134

#include <linux/module.h>

   135

#include <linux/kernel.h>

   136

#include <linux/compiler.h>

   137

#include <linux/pci.h>

   138

#include <linux/init.h>

   139

#include <linux/ioport.h>

   140

#include <linux/netdevice.h>

   141

#include <linux/etherdevice.h>

   142

#include <linux/rtnetlink.h>

   143

#include <linux/delay.h>

   144

#include <linux/ethtool.h>

   145

#include <linux/mii.h>

   146

#include <linux/completion.h>

   147

#include <linux/crc32.h>

   148

#include <asm/io.h>

   149

#include <asm/uaccess.h>

   150

#include <asm/irq.h>

   151

   152

#include "../globals.h"

   153

#include "ecdev.h"

   154

   155

#define RTL8139_DRIVER_NAME DRV_NAME \

   156

                            " EtherCAT-capable Fast Ethernet driver " \

   157

                            DRV_VERSION ", master " EC_MASTER_VERSION

   158

   159

#define PFX DRV_NAME ": "

   160

   161

/* Default Message level */

   162

#define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \

   163

                                 NETIF_MSG_PROBE  | \

   164

                                 NETIF_MSG_LINK)

   165

   166

   167

/* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */

   168

#ifdef CONFIG_8139TOO_PIO

   169

#define USE_IO_OPS 1

   170

#endif

   171

   172

/* define to 1, 2 or 3 to enable copious debugging info */

   173

#define RTL8139_DEBUG 0

   174

   175

/* define to 1 to disable lightweight runtime debugging checks */

   176

#undef RTL8139_NDEBUG

   177

   178

   179

#if RTL8139_DEBUG

   180

/* note: prints function name for you */

   181

#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)

   182

#else

   183

#  define DPRINTK(fmt, args...)

   184

#endif

   185

   186

#ifdef RTL8139_NDEBUG

   187

#  define assert(expr) do {} while (0)

   188

#else

   189

#  define assert(expr) \

   190

        if(unlikely(!(expr))) {				        \

   191

        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n",	\

   192

        #expr,__FILE__,__FUNCTION__,__LINE__);		        \

   193

        }

   194

#endif

   195

   196

   197

/* A few user-configurable values. */

   198

/* media options */

   199

#define MAX_UNITS 8

   200

static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};

   201

static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};

   202

   203

/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).

   204

   The RTL chips use a 64 element hash table based on the Ethernet CRC.  */

   205

static int multicast_filter_limit = 32;

   206

   207

/* bitmapped message enable number */

   208

static int debug = -1;

   209

   210

/*

   211

 * Receive ring size 

   212

 * Warning: 64K ring has hardware issues and may lock up.

   213

 */

   214

#if defined(CONFIG_SH_DREAMCAST)

   215

#define RX_BUF_IDX	1	/* 16K ring */

   216

#else

   217

#define RX_BUF_IDX	2	/* 32K ring */

   218

#endif

   219

#define RX_BUF_LEN	(8192 << RX_BUF_IDX)

   220

#define RX_BUF_PAD	16

   221

#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */

   222

   223

#if RX_BUF_LEN == 65536

   224

#define RX_BUF_TOT_LEN	RX_BUF_LEN

   225

#else

   226

#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)

   227

#endif

   228

   229

/* Number of Tx descriptor registers. */

   230

#define NUM_TX_DESC	4

   231

   232

/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/

   233

#define MAX_ETH_FRAME_SIZE	1536

   234

   235

/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */

   236

#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE

   237

#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)

   238

   239

/* PCI Tuning Parameters

   240

   Threshold is bytes transferred to chip before transmission starts. */

   241

#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */

   242

   243

/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */

   244

#define RX_FIFO_THRESH	7	/* Rx buffer level before first PCI xfer.  */

   245

#define RX_DMA_BURST	7	/* Maximum PCI burst, '6' is 1024 */

   246

#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */

   247

#define TX_RETRY	8	/* 0-15.  retries = 16 + (TX_RETRY * 16) */

   248

   249

/* Operational parameters that usually are not changed. */

   250

/* Time in jiffies before concluding the transmitter is hung. */

   251

#define TX_TIMEOUT  (6*HZ)

   252

   253

   254

enum {

   255

	HAS_MII_XCVR = 0x010000,

   256

	HAS_CHIP_XCVR = 0x020000,

   257

	HAS_LNK_CHNG = 0x040000,

   258

};

   259

   260

#define RTL_NUM_STATS 4		/* number of ETHTOOL_GSTATS u64's */

   261

#define RTL_REGS_VER 1		/* version of reg. data in ETHTOOL_GREGS */

   262

#define RTL_MIN_IO_SIZE 0x80

   263

#define RTL8139B_IO_SIZE 256

   264

   265

#define RTL8129_CAPS	HAS_MII_XCVR

   266

#define RTL8139_CAPS	HAS_CHIP_XCVR|HAS_LNK_CHNG

   267

   268

typedef enum {

   269

	RTL8139 = 0,

   270

	RTL8129,

   271

} board_t;

   272

   273

   274

/* indexed by board_t, above */

   275

static struct {

   276

	const char *name;

   277

	u32 hw_flags;

   278

} board_info[] __devinitdata = {

   279

	{ "RealTek RTL8139", RTL8139_CAPS },

   280

	{ "RealTek RTL8129", RTL8129_CAPS },

   281

};

   282

   283

   284

static struct pci_device_id rtl8139_pci_tbl[] = {

   285

	{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   286

	{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   287

	{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   288

	{0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   289

	{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   290

	{0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   291

	{0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   292

	{0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   293

	{0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   294

	{0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   295

	{0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   296

	{0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   297

	{0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   298

	{0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   299

	{0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   300

	{0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   301

	{0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   302

	{0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   303

	{0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 

   304

   305

#ifdef CONFIG_SH_SECUREEDGE5410

   306

	/* Bogus 8139 silicon reports 8129 without external PROM :-( */

   307

	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },

   308

#endif

   309

#ifdef CONFIG_8139TOO_8129

   310

	{0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },

   311

#endif

   312

   313

	/* some crazy cards report invalid vendor ids like

   314

	 * 0x0001 here.  The other ids are valid and constant,

   315

	 * so we simply don't match on the main vendor id.

   316

	 */

   317

	{PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },

   318

	{PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },

   319

	{PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },

   320

   321

	{0,}

   322

};

   323

   324

/* prevent driver from being loaded automatically */

   325

//MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);

   326

   327

static struct {

   328

	const char str[ETH_GSTRING_LEN];

   329

} ethtool_stats_keys[] = {

   330

	{ "early_rx" },

   331

	{ "tx_buf_mapped" },

   332

	{ "tx_timeouts" },

   333

	{ "rx_lost_in_ring" },

   334

};

   335

   336

/* The rest of these values should never change. */

   337

   338

/* Symbolic offsets to registers. */

   339

enum RTL8139_registers {

   340

	MAC0 = 0,		/* Ethernet hardware address. */

   341

	MAR0 = 8,		/* Multicast filter. */

   342

	TxStatus0 = 0x10,	/* Transmit status (Four 32bit registers). */

   343

	TxAddr0 = 0x20,		/* Tx descriptors (also four 32bit). */

   344

	RxBuf = 0x30,

   345

	ChipCmd = 0x37,

   346

	RxBufPtr = 0x38,

   347

	RxBufAddr = 0x3A,

   348

	IntrMask = 0x3C,

   349

	IntrStatus = 0x3E,

   350

	TxConfig = 0x40,

   351

	RxConfig = 0x44,

   352

	Timer = 0x48,		/* A general-purpose counter. */

   353

	RxMissed = 0x4C,	/* 24 bits valid, write clears. */

   354

	Cfg9346 = 0x50,

   355

	Config0 = 0x51,

   356

	Config1 = 0x52,

   357

	FlashReg = 0x54,

   358

	MediaStatus = 0x58,

   359

	Config3 = 0x59,

   360

	Config4 = 0x5A,		/* absent on RTL-8139A */

   361

	HltClk = 0x5B,

   362

	MultiIntr = 0x5C,

   363

	TxSummary = 0x60,

   364

	BasicModeCtrl = 0x62,

   365

	BasicModeStatus = 0x64,

   366

	NWayAdvert = 0x66,

   367

	NWayLPAR = 0x68,

   368

	NWayExpansion = 0x6A,

   369

	/* Undocumented registers, but required for proper operation. */

   370

	FIFOTMS = 0x70,		/* FIFO Control and test. */

   371

	CSCR = 0x74,		/* Chip Status and Configuration Register. */

   372

	PARA78 = 0x78,

   373

	PARA7c = 0x7c,		/* Magic transceiver parameter register. */

   374

	Config5 = 0xD8,		/* absent on RTL-8139A */

   375

};

   376

   377

enum ClearBitMasks {

   378

	MultiIntrClear = 0xF000,

   379

	ChipCmdClear = 0xE2,

   380

	Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),

   381

};

   382

   383

enum ChipCmdBits {

   384

	CmdReset = 0x10,

   385

	CmdRxEnb = 0x08,

   386

	CmdTxEnb = 0x04,

   387

	RxBufEmpty = 0x01,

   388

};

   389

   390

/* Interrupt register bits, using my own meaningful names. */

   391

enum IntrStatusBits {

   392

	PCIErr = 0x8000,

   393

	PCSTimeout = 0x4000,

   394

	RxFIFOOver = 0x40,

   395

	RxUnderrun = 0x20,

   396

	RxOverflow = 0x10,

   397

	TxErr = 0x08,

   398

	TxOK = 0x04,

   399

	RxErr = 0x02,

   400

	RxOK = 0x01,

   401

   402

	RxAckBits = RxFIFOOver | RxOverflow | RxOK,

   403

};

   404

   405

enum TxStatusBits {

   406

	TxHostOwns = 0x2000,

   407

	TxUnderrun = 0x4000,

   408

	TxStatOK = 0x8000,

   409

	TxOutOfWindow = 0x20000000,

   410

	TxAborted = 0x40000000,

   411

	TxCarrierLost = 0x80000000,

   412

};

   413

enum RxStatusBits {

   414

	RxMulticast = 0x8000,

   415

	RxPhysical = 0x4000,

   416

	RxBroadcast = 0x2000,

   417

	RxBadSymbol = 0x0020,

   418

	RxRunt = 0x0010,

   419

	RxTooLong = 0x0008,

   420

	RxCRCErr = 0x0004,

   421

	RxBadAlign = 0x0002,

   422

	RxStatusOK = 0x0001,

   423

};

   424

   425

/* Bits in RxConfig. */

   426

enum rx_mode_bits {

   427

	AcceptErr = 0x20,

   428

	AcceptRunt = 0x10,

   429

	AcceptBroadcast = 0x08,

   430

	AcceptMulticast = 0x04,

   431

	AcceptMyPhys = 0x02,

   432

	AcceptAllPhys = 0x01,

   433

};

   434

   435

/* Bits in TxConfig. */

   436

enum tx_config_bits {

   437

   438

        /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */

   439

        TxIFGShift = 24,

   440

        TxIFG84 = (0 << TxIFGShift),    /* 8.4us / 840ns (10 / 100Mbps) */

   441

        TxIFG88 = (1 << TxIFGShift),    /* 8.8us / 880ns (10 / 100Mbps) */

   442

        TxIFG92 = (2 << TxIFGShift),    /* 9.2us / 920ns (10 / 100Mbps) */

   443

        TxIFG96 = (3 << TxIFGShift),    /* 9.6us / 960ns (10 / 100Mbps) */

   444

   445

	TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */

   446

	TxCRC = (1 << 16),	/* DISABLE appending CRC to end of Tx packets */

   447

	TxClearAbt = (1 << 0),	/* Clear abort (WO) */

   448

	TxDMAShift = 8,		/* DMA burst value (0-7) is shifted this many bits */

   449

	TxRetryShift = 4,	/* TXRR value (0-15) is shifted this many bits */

   450

   451

	TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */

   452

};

   453

   454

/* Bits in Config1 */

   455

enum Config1Bits {

   456

	Cfg1_PM_Enable = 0x01,

   457

	Cfg1_VPD_Enable = 0x02,

   458

	Cfg1_PIO = 0x04,

   459

	Cfg1_MMIO = 0x08,

   460

	LWAKE = 0x10,		/* not on 8139, 8139A */

   461

	Cfg1_Driver_Load = 0x20,

   462

	Cfg1_LED0 = 0x40,

   463

	Cfg1_LED1 = 0x80,

   464

	SLEEP = (1 << 1),	/* only on 8139, 8139A */

   465

	PWRDN = (1 << 0),	/* only on 8139, 8139A */

   466

};

   467

   468

/* Bits in Config3 */

   469

enum Config3Bits {

   470

	Cfg3_FBtBEn    = (1 << 0), /* 1 = Fast Back to Back */

   471

	Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */

   472

	Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */

   473

	Cfg3_CardB_En  = (1 << 3), /* 1 = enable CardBus registers */

   474

	Cfg3_LinkUp    = (1 << 4), /* 1 = wake up on link up */

   475

	Cfg3_Magic     = (1 << 5), /* 1 = wake up on Magic Packet (tm) */

   476

	Cfg3_PARM_En   = (1 << 6), /* 0 = software can set twister parameters */

   477

	Cfg3_GNTSel    = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */

   478

};

   479

   480

/* Bits in Config4 */

   481

enum Config4Bits {

   482

	LWPTN = (1 << 2),	/* not on 8139, 8139A */

   483

};

   484

   485

/* Bits in Config5 */

   486

enum Config5Bits {

   487

	Cfg5_PME_STS     = (1 << 0), /* 1 = PCI reset resets PME_Status */

   488

	Cfg5_LANWake     = (1 << 1), /* 1 = enable LANWake signal */

   489

	Cfg5_LDPS        = (1 << 2), /* 0 = save power when link is down */

   490

	Cfg5_FIFOAddrPtr = (1 << 3), /* Realtek internal SRAM testing */

   491

	Cfg5_UWF         = (1 << 4), /* 1 = accept unicast wakeup frame */

   492

	Cfg5_MWF         = (1 << 5), /* 1 = accept multicast wakeup frame */

   493

	Cfg5_BWF         = (1 << 6), /* 1 = accept broadcast wakeup frame */

   494

};

   495

   496

enum RxConfigBits {

   497

	/* rx fifo threshold */

   498

	RxCfgFIFOShift = 13,

   499

	RxCfgFIFONone = (7 << RxCfgFIFOShift),

   500

   501

	/* Max DMA burst */

   502

	RxCfgDMAShift = 8,

   503

	RxCfgDMAUnlimited = (7 << RxCfgDMAShift),

   504

   505

	/* rx ring buffer length */

   506

	RxCfgRcv8K = 0,

   507

	RxCfgRcv16K = (1 << 11),

   508

	RxCfgRcv32K = (1 << 12),

   509

	RxCfgRcv64K = (1 << 11) | (1 << 12),

   510

   511

	/* Disable packet wrap at end of Rx buffer. (not possible with 64k) */

   512

	RxNoWrap = (1 << 7),

   513

};

   514

   515

/* Twister tuning parameters from RealTek.

   516

   Completely undocumented, but required to tune bad links on some boards. */

   517

enum CSCRBits {

   518

	CSCR_LinkOKBit = 0x0400,

   519

	CSCR_LinkChangeBit = 0x0800,

   520

	CSCR_LinkStatusBits = 0x0f000,

   521

	CSCR_LinkDownOffCmd = 0x003c0,

   522

	CSCR_LinkDownCmd = 0x0f3c0,

   523

};

   524

   525