--- a/drivers/ec_command.c	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_command.c	Fri Nov 18 11:46:20 2005 +0000
@@ -112,7 +112,7 @@
                             const unsigned char *data)
 {
   if (node_address == 0x0000)
-    EC_DBG(KERN_WARNING "WARNING: Using node address 0x0000!\n");
+    EC_DBG(KERN_WARNING "EtherCAT: Using node address 0x0000!\n");
 
   ECAT_FUNC_HEADER;
 

--- a/drivers/ec_device.c	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_device.c	Fri Nov 18 11:46:20 2005 +0000
@@ -253,28 +253,30 @@
 
    @param ecd EtherCAT-Gerät
    @param data Zeiger auf den Speicherbereich, in den die
-   empfangenen Daten kopiert werden sollen
-   @param size Größe des angegebenen Speicherbereichs
+               empfangenen Daten kopiert werden sollen
 
    @return Anzahl der kopierten Bytes bei Erfolg, sonst < 0
 */
 
 int EtherCAT_device_receive(EtherCAT_device_t *ecd,
-                            unsigned char *data,
-                            unsigned int size)
-{
-  int cnt;
-
+                            unsigned char *data)
+{
   if (ecd->state != ECAT_DS_RECEIVED)
   {
     EC_DBG(KERN_ERR "EtherCAT: receive - Nothing received!\n");
     return -1;
   }
 
-  cnt = min(ecd->rx_data_length, size);
-  memcpy(data,ecd->rx_data, cnt);
-
-  return cnt;
+  if (ecd->rx_data_length > ECAT_FRAME_BUFFER_SIZE)
+  {
+    EC_DBG(KERN_ERR "EtherCAT: receive - Reveived frame too long (%i Bytes)!\n",
+           ecd->rx_data_length);
+    return -1;
+  }
+
+  memcpy(data, ecd->rx_data, ecd->rx_data_length);
+
+  return ecd->rx_data_length;
 }
 
 /***************************************************************/

--- a/drivers/ec_device.h	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_device.h	Fri Nov 18 11:46:20 2005 +0000
@@ -77,7 +77,7 @@
 int EtherCAT_device_close(EtherCAT_device_t *);
 
 int EtherCAT_device_send(EtherCAT_device_t *, unsigned char *, unsigned int);
-int EtherCAT_device_receive(EtherCAT_device_t *, unsigned char *, unsigned int);
+int EtherCAT_device_receive(EtherCAT_device_t *, unsigned char *);
 void EtherCAT_device_call_isr(EtherCAT_device_t *);
 
 void EtherCAT_device_debug(EtherCAT_device_t *);

--- a/drivers/ec_globals.h	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_globals.h	Fri Nov 18 11:46:20 2005 +0000
@@ -15,17 +15,7 @@
 /**
    Maximale Größe eines EtherCAT-Frames
 */
-#define ECAT_FRAME_BUFFER_SIZE 1600
-
-/**
-   Anzahl der Kommandos in einem Master-Kommandoring
-*/
-#define ECAT_COMMAND_RING_SIZE 10
-
-/**
-   Anzahl der Versuche beim Asynchronen Senden/Empfangen
-*/
-#define ECAT_NUM_RETRIES 10
+#define ECAT_FRAME_BUFFER_SIZE 1500
 
 /**
    NULL-Define, falls noch nicht definiert.

--- a/drivers/ec_master.c	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_master.c	Fri Nov 18 11:46:20 2005 +0000
@@ -25,7 +25,7 @@
 
    @param master Zeiger auf den zu initialisierenden
    EtherCAT-Master
-   @param dev Zeiger auf das EtherCAT-gerät, mit dem der
+   @param dev Zeiger auf das EtherCAT-Gerät, mit dem der
    Master arbeiten soll
 
    @return 0 bei Erfolg, sonst < 0 (= dev ist NULL)
@@ -96,10 +96,12 @@
 
   if (EtherCAT_simple_send(master, cmd) < 0) return -1;
 
-  tries_left = 100;
-  while (cmd->state == ECAT_CS_SENT && tries_left)
-  {
-    udelay(10);
+  EtherCAT_device_call_isr(master->dev);
+
+  tries_left = 1000;
+  while (master->dev->state == ECAT_DS_SENT && tries_left)
+  {
+    udelay(1);
     EtherCAT_device_call_isr(master->dev);
     tries_left--;
   }
@@ -137,6 +139,13 @@
 
   length = cmd->data_length + 12;
   framelength = length + 2;
+
+  if (framelength > ECAT_FRAME_BUFFER_SIZE)
+  {
+    EC_DBG(KERN_ERR "EtherCAT: Frame too long (%i)!\n", framelength);
+    return -1;
+  }
+
   if (framelength < 46) framelength = 46;
 
   if (master->debug_level > 0)
@@ -223,32 +232,32 @@
 int EtherCAT_simple_receive(EtherCAT_master_t *master,
                             EtherCAT_command_t *cmd)
 {
-  unsigned int rx_data_length, length;
+  unsigned int length;
+  int receive_ret;
   unsigned char command_type, command_index;
 
-  rx_data_length = EtherCAT_device_receive(master->dev, master->rx_data,
-                                           ECAT_FRAME_BUFFER_SIZE);
-
-  if (rx_data_length < 2)
+  if ((receive_ret = EtherCAT_device_receive(master->dev,
+                                             master->rx_data)) < 0)
+  {
+    return -1;
+  }
+
+  master->rx_data_length = (unsigned int) receive_ret;
+
+  if (master->rx_data_length < 2)
   {
     EC_DBG(KERN_ERR "EtherCAT: Received frame with incomplete EtherCAT header!\n");
-    EC_DBG(KERN_DEBUG "EtherCAT: tx_data content:\n");
-    output_debug_data(master->tx_data, master->tx_data_length);
-    EC_DBG(KERN_DEBUG "EtherCAT: rx_data content:\n");
-    output_debug_data(master->rx_data, rx_data_length);
+    output_debug_data(master);
     return -1;
   }
 
   // Länge des gesamten Frames prüfen
   length = ((master->rx_data[1] & 0x07) << 8) | (master->rx_data[0] & 0xFF);
 
-  if (length > rx_data_length)
+  if (length > master->rx_data_length)
   {
     EC_DBG(KERN_ERR "EtherCAT: Received corrupted frame (length does not match)!\n");
-    EC_DBG(KERN_DEBUG "EtherCAT: tx_data content:\n");
-    output_debug_data(master->tx_data, master->tx_data_length);
-    EC_DBG(KERN_DEBUG "EtherCAT: rx_data content:\n");
-    output_debug_data(master->rx_data, rx_data_length);
+    output_debug_data(master);
     return -1;
   }
 
@@ -256,13 +265,10 @@
   command_index = master->rx_data[2 + 1];
   length = (master->rx_data[2 + 6] & 0xFF) | ((master->rx_data[2 + 7] & 0x07) << 8);
 
-  if (rx_data_length - 2 < length + 12)
+  if (master->rx_data_length - 2 < length + 12)
   {
     EC_DBG(KERN_ERR "EtherCAT: Received frame with incomplete command data!\n");
-    EC_DBG(KERN_DEBUG "EtherCAT: tx_data content:\n");
-    output_debug_data(master->tx_data, master->tx_data_length);
-    EC_DBG(KERN_DEBUG "EtherCAT: rx_data content:\n");
-    output_debug_data(master->rx_data, rx_data_length);
+    output_debug_data(master);
     return -1;
   }
 
@@ -283,10 +289,7 @@
   else
   {
     EC_DBG(KERN_WARNING "EtherCAT: WARNING - Send/Receive anomaly!\n");
-    EC_DBG(KERN_DEBUG "EtherCAT: tx_data content:\n");
-    output_debug_data(master->tx_data, master->tx_data_length);
-    EC_DBG(KERN_DEBUG "EtherCAT: rx_data content:\n");
-    output_debug_data(master->rx_data, rx_data_length);
+    output_debug_data(master);
   }
 
   master->dev->state = ECAT_DS_READY;
@@ -991,8 +994,24 @@
 
 int EtherCAT_read_process_data(EtherCAT_master_t *master)
 {
+  unsigned int tries_left;
+
   EtherCAT_device_call_isr(master->dev);
 
+  tries_left = 1000;
+  while (master->dev->state == ECAT_DS_SENT && tries_left)
+  {
+    udelay(1);
+    EtherCAT_device_call_isr(master->dev);
+    tries_left--;
+  }
+
+  if (!tries_left)
+  {
+    EC_DBG(KERN_ERR "EtherCAT: Timeout while receiving process data!\n");
+    return -1;
+  }
+
   if (EtherCAT_simple_receive(master, &master->process_data_command) < 0)
   {
     EC_DBG(KERN_ERR "EtherCAT: Could not receive cyclic command!\n");
@@ -1029,58 +1048,37 @@
 /***************************************************************/
 
 /**
-   Setzt einen Byte-Wert im Speicher.
-
-   @param data Startadresse
-   @param offset Byte-Offset
-   @param value Wert
-*/
-
-void set_byte(unsigned char *data,
-              unsigned int offset,
-              unsigned char value)
-{
-  data[offset] = value;
-}
-
-/***************************************************************/
-
-/**
-   Setzt einen Word-Wert im Speicher.
-
-   @param data Startadresse
-   @param offset Byte-Offset
-   @param value Wert
-*/
-
-void set_word(unsigned char *data,
-              unsigned int offset,
-              unsigned int value)
-{
-  data[offset] = value & 0xFF;
-  data[offset + 1] = (value & 0xFF00) >> 8;
-}
-
-/***************************************************************/
-
-/**
    Gibt Frame-Inhalte zwecks Debugging aus.
 
    @param data Startadresse
    @param length Länge der Daten
 */
 
-void output_debug_data(unsigned char *data, unsigned int length)
+void output_debug_data(const EtherCAT_master_t *master)
 {
   unsigned int i;
 
+  EC_DBG(KERN_DEBUG "EtherCAT: tx_data content (%i Bytes):\n",
+         master->tx_data_length);
+
   EC_DBG(KERN_DEBUG);
-  for (i = 0; i < length; i++)
-  {
-    EC_DBG("%02X ", data[i]);
+  for (i = 0; i < master->tx_data_length; i++)
+  {
+    EC_DBG("%02X ", master->tx_data[i]);
     if ((i + 1) % 16 == 0) EC_DBG("\n" KERN_DEBUG);
   }
   EC_DBG("\n");
-}
-
-/***************************************************************/
+
+  EC_DBG(KERN_DEBUG "EtherCAT: rx_data content (%i Bytes):\n",
+         master->rx_data_length);
+
+  EC_DBG(KERN_DEBUG);
+  for (i = 0; i < master->rx_data_length; i++)
+  {
+    EC_DBG("%02X ", master->rx_data[i]);
+    if ((i + 1) % 16 == 0) EC_DBG("\n" KERN_DEBUG);
+  }
+  EC_DBG("\n");
+}
+
+/***************************************************************/

--- a/drivers/ec_master.h	Fri Nov 18 10:30:01 2005 +0000
+++ b/drivers/ec_master.h	Fri Nov 18 11:46:20 2005 +0000
@@ -44,6 +44,7 @@
   unsigned char rx_data[ECAT_FRAME_BUFFER_SIZE]; /**< Statische Speicher für
                                                     eine Kopie des Rx-Buffers
                                                     im EtherCAT-Gerät */
+  unsigned int rx_data_length; /**< Länge der Daten im Empfangsspeicher */
 
   unsigned char *process_data; /**< Zeiger auf Speicher mit Prozessdaten */
   unsigned int process_data_length; /**< Länge der Prozessdaten */
@@ -82,9 +83,7 @@
 void EtherCAT_clear_process_data(EtherCAT_master_t *);
 
 // Private functions
-void set_byte(unsigned char *, unsigned int, unsigned char);
-void set_word(unsigned char *, unsigned int, unsigned int);
-void output_debug_data(unsigned char *, unsigned int);
+void output_debug_data(const EtherCAT_master_t *);
 
 /***************************************************************/