1

/**************************************************************************************************

     2

*

     3

*                          msr_module.c

     4

*

     5

*           Kernelmodul f�ür 2.6 Kernel zur Me�ßdatenerfassung, Steuerung und Regelung

     6

*           Zeitgeber ist der Timerinterrupt (tq)

     7

*           

     8

*           Autor: Wilhelm Hagemeister

     9

*

    10

*           (C) Copyright IgH 2002

    11

*           Ingenieurgemeinschaft IgH

    12

*           Heinz-B�äcker Str. 34

    13

*           D-45356 Essen

    14

*           Tel.: +49 201/61 99 31

    15

*           Fax.: +49 201/61 98 36

    16

*           E-mail: hm@igh-essen.com

    17

*

    18

*

    19

*           $RCSfile: msr_module.c,v $

    20

*           $Revision: 1.1 $

    21

*           $Author: hm $

    22

*           $Date: 2005/11/14 20:32:57 $

    23

*           $State: Exp $

    24

*

    25

*

    26

*           $Log: msr_module.c,v $

    27

*           Revision 1.1  2005/11/14 20:32:57  hm

    28

*           Initial revision

    29

*

    30

*           Revision 1.13  2005/06/17 11:35:13  hm

    31

*           *** empty log message ***

    32

*

    33

*

    34

*           Hello Emacs: -*- c-basic-offset: 2; -*-

    35

*

    36

**************************************************************************************************/

    37

    38

    39

/*--includes-------------------------------------------------------------------------------------*/

    40

    41

    42

#ifndef __KERNEL__

    43

#  define __KERNEL__

    44

#endif

    45

#ifndef MODULE

    46

#  define MODULE

    47

#endif

    48

    49

#include <linux/config.h>

    50

#include <linux/module.h>

    51

    52

#include <linux/sched.h>

    53

#include <linux/kernel.h>

    54

#include <linux/vmalloc.h> 

    55

#include <linux/fs.h>     /* everything... */

    56

#include <linux/proc_fs.h>

    57

#include <linux/time.h>

    58

#include <linux/timer.h>

    59

#include <linux/timex.h>  /* fuer get_cycles */

    60

#include <linux/errno.h>  /* error codes */

    61

#include <asm/msr.h> /* maschine-specific registers */

    62

#include <linux/param.h> /* fuer HZ */

    63

#include <linux/ipipe.h>

    64

    65

#include "msr_param.h"   //wird im Projektverzeichnis erwartet

    66

    67

//#include <msr_control.h>

    68

#include <msr_lists.h>

    69

#include <msr_charbuf.h>

    70

#include <msr_reg.h>

    71

#include <msr_error_reg.h>

    72

#include <msr_messages.h>

    73

#include <msr_proc.h>

    74

#include <msr_utils.h>

    75

#include <msr_main.h>

    76

    77

    78

#include <msr_float.h>

    79

    80

#include "../drivers/ec_master.h"

    81

#include "../drivers/ec_device.h"

    82

#include "../drivers/ec_types.h"

    83

#include "../drivers/ec_module.h"

    84

    85

#include "msr_jitter.h"

    86

    87

MODULE_AUTHOR("Wilhelm Hagemeister, Ingenieurgemeinschaft IgH");

    88

MODULE_LICENSE("GPL");

    89

    90

/*--external functions---------------------------------------------------------------------------*/

    91

    92

/*--external data--------------------------------------------------------------------------------*/

    93

    94

#define HZREDUCTION (MSR_ABTASTFREQUENZ/HZ)

    95

    96

extern wait_queue_head_t msr_read_waitqueue;

    97

    98

extern struct msr_char_buf *msr_kanal_puffer;

    99

   100

extern int proc_abtastfrequenz;

   101

   102

/*--public data----------------------------------------------------------------------------------*/

   103

/*--local data-----------------------------------------------------------------------------------*/

   104

//struct timer_list timer;

   105

   106

extern struct timeval process_time;           

   107

struct timeval msr_time_increment;                    // Increment per Interrupt

   108

   109

//adeos

   110

   111

static struct ipipe_domain this_domain;

   112

   113

static struct ipipe_sysinfo sys_info;

   114

   115

static EtherCAT_master_t *ecat_master = NULL;

   116

   117

static EtherCAT_slave_t ecat_slaves[] =

   118

{

   119

   120

   121

#if 1

   122

    // Block 1

   123

    ECAT_INIT_SLAVE(Beckhoff_EK1100),

   124

    ECAT_INIT_SLAVE(Beckhoff_EL4102),

   125

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   126

    ECAT_INIT_SLAVE(Beckhoff_EL3162),

   127

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   128

    ECAT_INIT_SLAVE(Beckhoff_EL3102),

   129

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   130

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   131

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   132

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   133

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   134

   135

    // Block 2

   136

    ECAT_INIT_SLAVE(Beckhoff_EK1100),

   137

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   138

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   139

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   140

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   141

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   142

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   143

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   144

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   145

    ECAT_INIT_SLAVE(Beckhoff_EL2004),

   146

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   147

    ECAT_INIT_SLAVE(Beckhoff_EL1014),

   148

    ECAT_INIT_SLAVE(Beckhoff_EL1014)

   149

#endif

   150

   151

#if 1

   152

    // Block 3

   153

   ,ECAT_INIT_SLAVE(Beckhoff_EK1100),

   154

    ECAT_INIT_SLAVE(Beckhoff_EL3162),

   155

    ECAT_INIT_SLAVE(Beckhoff_EL3162),

   156

    ECAT_INIT_SLAVE(Beckhoff_EL3162),

   157

    ECAT_INIT_SLAVE(Beckhoff_EL3162),

   158

    ECAT_INIT_SLAVE(Beckhoff_EL3102),

   159

    ECAT_INIT_SLAVE(Beckhoff_EL3102),

   160

    ECAT_INIT_SLAVE(Beckhoff_EL3102),

   161

    ECAT_INIT_SLAVE(Beckhoff_EL4102),

   162

    ECAT_INIT_SLAVE(Beckhoff_EL4102),

   163

    ECAT_INIT_SLAVE(Beckhoff_EL4102),

   164

    ECAT_INIT_SLAVE(Beckhoff_EL4102),

   165

    ECAT_INIT_SLAVE(Beckhoff_EL4132)

   166

   167

   168

#endif

   169

};

   170

   171

#define ECAT_SLAVES_COUNT (sizeof(ecat_slaves) / sizeof(EtherCAT_slave_t))

   172

   173

#define USE_MSR_LIB

   174

   175

#ifdef USE_MSR_LIB

   176

double value;

   177

int dig1;

   178

#endif

   179

   180

/******************************************************************************

   181

 *

   182

 * Function: next2004

   183

 *

   184

 *****************************************************************************/

   185

   186

   187

   188

static int next2004(int *wrap)

   189

{

   190

    static int i = 0;

   191

    unsigned int j = 0;

   192

   193

    *wrap = 0;

   194

   195

    for (j = 0; j < ECAT_SLAVES_COUNT; j++)

   196

    {

   197

        i++;

   198

   199

        i %= ECAT_SLAVES_COUNT;

   200

   201

        if (i == 0) *wrap = 1;

   202

   203

        if (ecat_slaves[i].desc == Beckhoff_EL2004)

   204

        {

   205

            return i;

   206

        }

   207

    }

   208

   209

    return -1;

   210

}

   211

   212

   213

/******************************************************************************

   214

 *

   215

 * Function: msr_controller_run()

   216

 *

   217

 *****************************************************************************/

   218

   219

static void msr_controller_run(void)

   220

{

   221

    static int ms = 0;

   222

    static int cnt = 0;

   223

    static unsigned long int k = 0;

   224

    static int firstrun = 1;

   225

   226

    static int klemme = 0;

   227

    static int kanal = 0;

   228

    static int up_down = 0;

   229

    int wrap = 0;

   230

   231

   232

    // Prozessdaten lesen

   233

    msr_jitter_run(MSR_ABTASTFREQUENZ);

   234

   235

    if (!firstrun)

   236

    {

   237

        EtherCAT_read_process_data(ecat_master);

   238

   239

        // Daten lesen und skalieren

   240

#ifdef USE_MSR_LIB

   241

        value = EtherCAT_read_value(&ecat_master->slaves[5], 0) / 3276.0; 

   242

        dig1 = EtherCAT_read_value(&ecat_master->slaves[2], 0);

   243

#endif

   244

    }

   245

    else

   246

        klemme = next2004(&wrap);

   247

   248

   249

    ms++;

   250

    ms %= 1000;

   252

    {

   253

        cnt = 0;

   254

   255

        if (++kanal > 3)

   256

        {

   257

            kanal = 0;

   258

            klemme = next2004(&wrap);

   259

   260

            if (wrap == 1)

   261

            {

   262

                if (up_down == 1) up_down = 0;

   263

                else up_down = 1;

   264

            }

   265

        }

   266

    }

   267

   268

    if (klemme >= 0) {

   269

        EtherCAT_write_value(&ecat_master->slaves[klemme], kanal,up_down);

   270

	//printk("ECAT write: Klemme: %d, Kanal: %d, Wert: %d\n",klemme,kanal,up_down); 

   271

    }

   272

   273

#if 0

   274

    EtherCAT_write_value(&ecat_master->slaves[13], 1, ms > 500 ? 0 : 1);

   275

    EtherCAT_write_value(&ecat_master->slaves[14], 2, ms > 500 ? 0 : 1);

   276

    EtherCAT_write_value(&ecat_master->slaves[15], 3, ms > 500 ? 1 : 0);

   277

#endif

   278

   279

    // Prozessdaten schreiben

   280

    rdtscl(k);

   281

    EtherCAT_write_process_data(ecat_master);

   282

    firstrun = 0;

   283

   284

}

   285

   286

/*

   287

***************************************************************************************************

   288

*

   289

* Function: msr_run(_interrupt)

   290

*

   291

* Beschreibung: Routine wird zyklisch im Timerinterrupt ausgef�ührt

   292

*               (hier mu�ß alles rein, was Echtzeit ist ...)

   293

*

   294

* Parameter: Zeiger auf msr_data

   295

*

   296

* R�ückgabe:

   297

*

   298

* Status: exp

   299

*

   300

***************************************************************************************************

   301

*/

   302

   303

   304

void msr_run(unsigned irq)

   305

{

   306

   307

  static int counter = 0;

   308

#ifdef USE_MSR_LIB

   309

   310

    timeval_add(&process_time,&process_time,&msr_time_increment);

   311

   312

    MSR_ADEOS_INTERRUPT_CODE(

   313

	msr_controller_run();

   314

	msr_write_kanal_list();

   315

	);

   316

#else

   317

    msr_controller_run();

   318

#endif

   319

    /* und wieder in die Timerliste eintragen */

   320

    /* und neu in die Taskqueue eintragen */

   321

//    timer.expires += 1;

   322

//    add_timer(&timer);

   323

   325

    if(counter++ > HZREDUCTION) {

   327

	counter = 0;

   328

    }

   329

   330

   331

}

   332

   334

    printk("Domain %s started.\n",	ipipe_current_domain->name);

   335

   336

   337

    ipipe_get_sysinfo(&sys_info);

   338

    ipipe_virtualize_irq(ipipe_current_domain,sys_info.archdep.tmirq,

   339

			 &msr_run, NULL, IPIPE_HANDLE_MASK);

   340

   341

    ipipe_tune_timer(1000000000UL/MSR_ABTASTFREQUENZ,0); 

   342

   343

}

   344

   345

/*

   346

*******************************************************************************

   347

*

   348

* Function: msr_register_channels

   349

*

   350

* Beschreibung: KanŽäle registrieren

   351

*

   352

* Parameter:

   353

*

   354

* RŽückgabe: 

   355

*               

   356

* Status: exp

   357

*

   358

*******************************************************************************

   359

*/

   360

   361

int msr_globals_register(void)

   362

{

   363

#ifdef USE_MSR_LIB

   364

    msr_reg_kanal("/value", "V", &value, TDBL);

   365

    msr_reg_kanal("/dig1", "", &dig1, TINT);

   366

#endif

   367

/*  msr_reg_kanal("/Taskinfo/Ecat/TX-Delay","us",&ecat_tx_delay,TUINT);

   368

  msr_reg_kanal("/Taskinfo/Ecat/RX-Delay","us",&ecat_rx_delay,TUINT);

   369

  msr_reg_kanal("/Taskinfo/Ecat/TX-Cnt","",&tx_intr,TUINT);

   370

  msr_reg_kanal("/Taskinfo/Ecat/RX-Cnt","",&rx_intr,TUINT);

   371

  msr_reg_kanal("/Taskinfo/Ecat/Total-Cnt","",&total_intr,TUINT);

   372

*/

   373

  return 0;

   374

}

   375

   376

   377

/****************************************************************************************************

   378

 * the init/clean material

   379

 ****************************************************************************************************/

   380

   381

   382

int __init init_module()

   383

{

   384

    struct ipipe_domain_attr attr; //ipipe

   385

   386

    // Als allererstes die RT-lib initialisieren

   387

#ifdef USE_MSR_LIB

   388

    if (msr_rtlib_init(1,MSR_ABTASTFREQUENZ,10,&msr_globals_register) < 0) {

   389

        msr_print_warn("msr_modul: can't initialize rtlib!");

   390

        goto out_return;

   391

    }

   392

#endif

   393

   394

    msr_jitter_init();

   395

   396

    printk(KERN_INFO "=== Starting EtherCAT environment... ===\n");

   397

   398

    if ((ecat_master = EtherCAT_request(0)) == NULL) {

   399

        printk(KERN_ERR "EtherCAT master 0 not available!\n");

   400

        goto out_msr_cleanup;

   401

    }

   402

   403

    printk("Checking EtherCAT slaves.\n");

   404

   405

    if (EtherCAT_check_slaves(ecat_master, ecat_slaves, ECAT_SLAVES_COUNT) != 0) {

   406

        printk(KERN_ERR "EtherCAT: Could not init slaves!\n");

   407

        goto out_release_master;

   408

    }

   409

   410

    printk("Activating all EtherCAT slaves.\n");

   411

   412

    if (EtherCAT_activate_all_slaves(ecat_master) != 0) {

   413

        printk(KERN_ERR "EtherCAT: Could not activate slaves!\n");

   414

        goto out_release_master;

   415

    }

   416

   417

    do_gettimeofday(&process_time);

   418

    msr_time_increment.tv_sec=0;

   419

    msr_time_increment.tv_usec=(unsigned int)(1000000/MSR_ABTASTFREQUENZ);

   420

   421

    ipipe_init_attr (&attr);

   422

    attr.name     = "IPIPE-MSR-MODULE";

   423

    attr.priority = IPIPE_ROOT_PRIO + 1;

   424

    attr.entry    = &domain_entry;

   425

    ipipe_register_domain(&this_domain,&attr);

   426

   427

    return 0;

   428

   429

 out_release_master:

   430

    EtherCAT_release(ecat_master);

   431

   432

 out_msr_cleanup:

   433

    msr_rtlib_cleanup();

   434

   435

 out_return:

   436

    return -1;

   437

}

   438

   439

   440

//****************************************************************************

   441

void __exit cleanup_module()

   442

   443

{

   444

    msr_print_info("msk_modul: unloading...");

   445

   446

    ipipe_tune_timer(1000000000UL/HZ,0); //alten Timertakt wieder herstellen

   447

    ipipe_unregister_domain(&this_domain);

   448

   449

    printk(KERN_INFO "=== Stopping EtherCAT environment... ===\n");

   450

   451

    if (ecat_master)

   452

    {

   453

        EtherCAT_clear_process_data(ecat_master);

   454

        printk(KERN_INFO "Deactivating slaves.\n");

   455

        EtherCAT_deactivate_all_slaves(ecat_master);

   456

        EtherCAT_release(ecat_master);

   457

    }

   458

   459

    printk(KERN_INFO "=== EtherCAT environment stopped. ===\n");

   460

   461

#ifdef USE_MSR_LIB

   462

    msr_rtlib_cleanup();

   463

#endif

   464

}

   465

   466

MODULE_LICENSE("GPL");

   467

MODULE_AUTHOR ("Wilhelm Hagemeister <hm@igh-essen.com>");

   468

MODULE_DESCRIPTION ("EtherCAT test environment");

   469

   470

module_init(init_module);

   471

module_exit(cleanup_module);

   472

   473

   474

   475

   476

   477

   478

   479

   480

   481

   482

   483

   484

   485

   486

   487