Added first systemd support.
authorFlorian Pose <fp@igh-essen.com>
Wed, 04 Jan 2012 18:00:36 +0100
changeset 2189 002b978df979
parent 2188 08f547145c91
child 2190 3fe304fea395
Added first systemd support.
.hgignore
NEWS
configure.ac
script/Makefile.am
script/ethercat.conf
script/ethercat.service.in
script/ethercatctl.in
--- a/.hgignore	Wed Jan 04 15:57:10 2012 +0100
+++ b/.hgignore	Wed Jan 04 18:00:36 2012 +0100
@@ -129,6 +129,8 @@
 modules.order
 script/Makefile
 script/Makefile.in
+script/ethercat.service
+script/ethercatctl
 script/init.d/Makefile
 script/init.d/Makefile.in
 script/init.d/ethercat
--- a/NEWS	Wed Jan 04 15:57:10 2012 +0100
+++ b/NEWS	Wed Jan 04 18:00:36 2012 +0100
@@ -77,6 +77,7 @@
 * A sync manager is always enabled, if it contains registered process data.
 * Added a configuration switch --enable-wildcards to use 0xffffffff as a
 * wildcard for vendor ID and product code.
+* Added support for systemd.
 
 Changes in 1.4.0:
 
--- a/configure.ac	Wed Jan 04 15:57:10 2012 +0100
+++ b/configure.ac	Wed Jan 04 18:00:36 2012 +0100
@@ -1,6 +1,6 @@
 #------------------------------------------------------------------------------
 #
-#  $Id: configure.ac,v 1baafcd263cc 2011/07/06 14:37:40 fp $
+#  $Id$
 #
 #  Copyright (C) 2006-2009  Florian Pose, Ingenieurgemeinschaft IgH
 #
@@ -798,26 +798,28 @@
         examples/mini/Makefile
         examples/rtai/Kbuild
         examples/rtai/Makefile
+        examples/rtai_rtdm/Makefile
         examples/tty/Kbuild
         examples/tty/Makefile
         examples/user/Makefile
         examples/xenomai/Makefile
         examples/xenomai_posix/Makefile
-        examples/rtai_rtdm/Makefile
         include/Makefile
         lib/Makefile
         m4/Makefile
         master/Kbuild
         master/Makefile
+        rtdm/Kbuild
+        rtdm/Makefile
         script/Makefile
+        script/ethercat.service
+        script/ethercatctl
         script/init.d/Makefile
         script/init.d/ethercat
         script/sysconfig/Makefile
         tool/Makefile
         tty/Kbuild
         tty/Makefile
-        rtdm/Makefile
-        rtdm/Kbuild
 ])
 AC_OUTPUT
 
--- a/script/Makefile.am	Wed Jan 04 15:57:10 2012 +0100
+++ b/script/Makefile.am	Wed Jan 04 18:00:36 2012 +0100
@@ -24,15 +24,29 @@
 #  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 #
 #  ---
-#  
-#  The license mentioned above concerns the source code only. Using the EtherCAT
-#  technology and brand is only permitted in compliance with the industrial
-#  property and similar rights of Beckhoff Automation GmbH.
+#
+#  The license mentioned above concerns the source code only. Using the
+#  EtherCAT technology and brand is only permitted in compliance with the
+#  industrial property and similar rights of Beckhoff Automation GmbH.
 #
 #------------------------------------------------------------------------------
 
 SUBDIRS = init.d sysconfig
 
-EXTRA_DIST = ifup-eoe.sh
+sbin_SCRIPTS = ethercatctl
+
+systemddir = $(libdir)/systemd/system
+systemd_DATA = ethercat.service
+
+sysconf_DATA = ethercat.conf
+
+EXTRA_DIST = \
+	ethercatctl.in \
+	ethercat.service.in \
+	ifup-eoe.sh
+
+BUILT_SOURCES = \
+	ethercatctl \
+	ethercat.service
 
 #------------------------------------------------------------------------------
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/script/ethercat.conf	Wed Jan 04 18:00:36 2012 +0100
@@ -0,0 +1,55 @@
+#------------------------------------------------------------------------------
+#
+#  EtherCAT master configuration file for use with ethercatctl.
+#
+#  $Id$
+#
+#------------------------------------------------------------------------------
+
+#
+# Master devices.
+#
+# The MASTER<X>_DEVICE variable specifies the Ethernet device for a master
+# with index 'X'.
+#
+# Specify the MAC address (hexadecimal with colons) of the Ethernet device to
+# use. Example: "00:00:08:44:ab:66"
+#
+# The broadcast address "ff:ff:ff:ff:ff:ff" has a special meaning: It tells
+# the master to accept the first device offered by any Ethernet driver.
+#
+# The MASTER<X>_DEVICE variables also determine, how many masters will be
+# created: A non-empty variable MASTER0_DEVICE will create one master, adding a
+# non-empty variable MASTER1_DEVICE will create a second master, and so on.
+#
+MASTER0_DEVICE=""
+#MASTER1_DEVICE=""
+
+#
+# Ethernet driver modules to use for EtherCAT operation.
+#
+# Specify a non-empty list of Ethernet drivers, that shall be used for EtherCAT
+# operation.
+#
+# Except for the generic Ethernet driver module, the init script will try to
+# unload the usual Ethernet driver modules in the list and replace them with
+# the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not
+# found, a warning will appear.
+#
+# Possible values: 8139too, e100, e1000, e1000e, r8169, generic. Separate
+# multiple drivers with spaces.
+#
+# Note: The e100, e1000, e1000e, r8169 and generic drivers are not built by
+# default.  Enable them with the --enable-<driver> configure switches.
+#
+DEVICE_MODULES=""
+
+#
+# Flags for loading kernel modules.
+#
+# This can usually be left empty. Adjust this variable, if you have problems
+# with module loading.
+#
+#MODPROBE_FLAGS="-b"
+
+#------------------------------------------------------------------------------
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/script/ethercat.service.in	Wed Jan 04 18:00:36 2012 +0100
@@ -0,0 +1,12 @@
+#
+# EtherCAT Master Kernel Modules
+#
+
+[Unit]
+Description=EtherCAT Master Kernel Modules
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=@prefix@/sbin/ethercatctl start
+ExecStop=@prefix@/sbin/ethercatctl stop
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/script/ethercatctl.in	Wed Jan 04 18:00:36 2012 +0100
@@ -0,0 +1,211 @@
+#!/bin/sh
+
+#------------------------------------------------------------------------------
+#
+#  Start script for EtherCAT to use with systemd
+#
+#  $Id$
+#
+#  Copyright (C) 2006-2012  Florian Pose, Ingenieurgemeinschaft IgH
+#
+#  This file is part of the IgH EtherCAT Master.
+#
+#  The IgH EtherCAT Master is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License version 2, as
+#  published by the Free Software Foundation.
+#
+#  The IgH EtherCAT Master is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with the IgH EtherCAT Master; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#  ---
+#
+#  The license mentioned above concerns the source code only. Using the
+#  EtherCAT technology and brand is only permitted in compliance with the
+#  industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#  vim: expandtab sw=4 tw=78
+#
+#------------------------------------------------------------------------------
+
+MODPROBE=/sbin/modprobe
+RMMOD=/sbin/rmmod
+MODINFO=/sbin/modinfo
+
+ETHERCAT=@prefix@/bin/ethercat
+
+#------------------------------------------------------------------------------
+
+ETHERCAT_CONFIG=/etc/ethercat.conf
+
+if [ ! -r ${ETHERCAT_CONFIG} ]; then
+    echo ${ETHERCAT_CONFIG} not existing;
+    exit 6
+fi
+
+. ${ETHERCAT_CONFIG}
+
+#------------------------------------------------------------------------------
+
+parse_mac_address() {
+    if [ -z "${1}" ]; then
+        MAC=""
+    elif echo ${1} | grep -qE '^([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}$'; then
+        MAC=${1}
+    else
+        echo Invalid MAC address \"${1}\" in ${ETHERCAT_CONFIG}
+        exit 1
+    fi
+}
+
+#------------------------------------------------------------------------------
+
+case "${1}" in
+
+start)
+    # construct DEVICES and BACKUPS from configuration variables
+    DEVICES=""
+    BACKUPS=""
+    MASTER_INDEX=0
+
+    while true; do
+        DEVICE=$(eval echo "\${MASTER${MASTER_INDEX}_DEVICE}")
+        BACKUP=$(eval echo "\${MASTER${MASTER_INDEX}_BACKUP}")
+        if [ -z "${DEVICE}" ]; then break; fi
+
+        if [ ${MASTER_INDEX} -gt 0 ]; then
+            DEVICES=${DEVICES},
+            BACKUPS=${BACKUPS},
+        fi
+
+        parse_mac_address ${DEVICE}
+        DEVICES=${DEVICES}${MAC}
+
+        parse_mac_address ${BACKUP}
+        BACKUPS=${BACKUPS}${MAC}
+
+        MASTER_INDEX=$(expr ${MASTER_INDEX} + 1)
+    done
+
+    # load master module
+    if ! ${MODPROBE} ${MODPROBE_FLAGS} ec_master \
+            main_devices=${DEVICES} backup_devices=${BACKUPS}; then
+        exit 1
+    fi
+
+    LOADED_MODULES=ec_master
+
+    # check for modules to replace
+    for MODULE in ${DEVICE_MODULES}; do
+        ECMODULE=ec_${MODULE}
+        if ! ${MODINFO} ${ECMODULE} > /dev/null; then
+            continue # ec_* module not found
+        fi
+
+        if [ ${MODULE} != "generic" ]; then
+            # try to unload standard module
+            if lsmod | grep "^${MODULE} " > /dev/null; then
+                if ! ${RMMOD} ${MODULE}; then
+                    ${RMMOD} ${LOADED_MODULES}
+                    exit 1
+                fi
+            fi
+        fi
+
+        if ! ${MODPROBE} ${MODPROBE_FLAGS} ${ECMODULE}; then
+            if [ ${MODULE} != "generic" ]; then
+                ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE} # try to restore
+            fi
+            ${RMMOD} ${LOADED_MODULES}
+            exit 1
+        fi
+
+        LOADED_MODULES=${ECMODULE} ${LOADED_MODULES}
+    done
+
+    exit 0
+    ;;
+
+#------------------------------------------------------------------------------
+
+stop)
+    # unload EtherCAT device modules
+    for MODULE in ${DEVICE_MODULES} master; do
+        ECMODULE=ec_${MODULE}
+        if ! lsmod | grep -q "^${ECMODULE} "; then
+            continue # ec_* module not loaded
+        fi
+        if ! ${RMMOD} ${ECMODULE}; then
+            exit 1
+        fi;
+    done
+
+    sleep 1
+
+    # load standard modules again
+    for MODULE in ${DEVICE_MODULES}; do
+        if [ ${MODULE} == "generic" ]; then
+            continue
+        fi
+        ${MODPROBE} ${MODPROBE_FLAGS} ${MODULE}
+    done
+
+    exit 0
+    ;;
+
+#------------------------------------------------------------------------------
+
+restart)
+    $0 stop || exit 1
+    sleep 1
+    $0 start
+    ;;
+
+#------------------------------------------------------------------------------
+
+status)
+    echo "Checking for EtherCAT master @VERSION@ "
+
+    # count masters in configuration file
+    MASTER_COUNT=0
+    while true; do
+        DEVICE=$(eval echo "\${MASTER${MASTER_COUNT}_DEVICE}")
+        if [ -z "${DEVICE}" ]; then break; fi
+        MASTER_COUNT=$(expr ${MASTER_COUNT} + 1)
+    done
+
+    RESULT=0
+
+    for i in `seq 0 $(expr ${MASTER_COUNT} - 1)`; do
+        echo -n "Master${i} "
+
+        # Check if the master is in idle or operation phase
+        ${ETHERCAT} master --master ${i} 2>/dev/null | \
+            grep -qE 'Phase:[[:space:]]*Idle|Phase:[[:space:]]*Operation'
+        EXITCODE=$?
+
+        if [ ${EXITCODE} -eq 0 ]; then
+            echo " running"
+        else
+            echo " dead"
+            RESULT=1
+        fi
+    done
+
+    exit ${RESULT}
+    ;;
+
+#------------------------------------------------------------------------------
+
+*)
+    echo "USAGE: $0 {start|stop|restart|status}"
+    exit 1
+    ;;
+esac
+
+#------------------------------------------------------------------------------