--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/script/ethercat.conf	Wed Jan 04 18:00:36 2012 +0100
@@ -0,0 +1,55 @@
+#------------------------------------------------------------------------------
+#
+#  EtherCAT master configuration file for use with ethercatctl.
+#
+#  $Id$
+#
+#------------------------------------------------------------------------------
+
+#
+# Master devices.
+#
+# The MASTER<X>_DEVICE variable specifies the Ethernet device for a master
+# with index 'X'.
+#
+# Specify the MAC address (hexadecimal with colons) of the Ethernet device to
+# use. Example: "00:00:08:44:ab:66"
+#
+# The broadcast address "ff:ff:ff:ff:ff:ff" has a special meaning: It tells
+# the master to accept the first device offered by any Ethernet driver.
+#
+# The MASTER<X>_DEVICE variables also determine, how many masters will be
+# created: A non-empty variable MASTER0_DEVICE will create one master, adding a
+# non-empty variable MASTER1_DEVICE will create a second master, and so on.
+#
+MASTER0_DEVICE=""
+#MASTER1_DEVICE=""
+
+#
+# Ethernet driver modules to use for EtherCAT operation.
+#
+# Specify a non-empty list of Ethernet drivers, that shall be used for EtherCAT
+# operation.
+#
+# Except for the generic Ethernet driver module, the init script will try to
+# unload the usual Ethernet driver modules in the list and replace them with
+# the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not
+# found, a warning will appear.
+#
+# Possible values: 8139too, e100, e1000, e1000e, r8169, generic. Separate
+# multiple drivers with spaces.
+#
+# Note: The e100, e1000, e1000e, r8169 and generic drivers are not built by
+# default.  Enable them with the --enable-<driver> configure switches.
+#
+DEVICE_MODULES=""
+
+#
+# Flags for loading kernel modules.
+#
+# This can usually be left empty. Adjust this variable, if you have problems
+# with module loading.
+#
+#MODPROBE_FLAGS="-b"
+
+#------------------------------------------------------------------------------