1 #------------------------------------------------------------------------------ |
|
2 # |
|
3 # EtherCAT sysconfig file |
|
4 # |
|
5 # $Id$ |
|
6 # |
|
7 #------------------------------------------------------------------------------ |
|
8 |
|
9 # |
|
10 # PCI index of the (RTL8139-)EtherCAT device |
|
11 # Setting this is mandatory for the EtherCAT init script! |
|
12 # |
|
13 #DEVICE_INDEX=99 |
|
14 |
|
15 # |
|
16 # Number of Ethernet-over-EtherCAT interfaces every master shall create |
|
17 # on startup. Default is 0. |
|
18 # |
|
19 #EOE_INTERFACES=0 |
|
20 |
|
21 # |
|
22 # Bridge all EoE interfaces after master startup |
|
23 # This variable shall contain the name of the EoE bridge to set up. |
|
24 # If the variable is empty or undefined, no EoE bridge will be built. |
|
25 # |
|
26 #EOE_BRIDGE=eoebr0 |
|
27 |
|
28 # |
|
29 # IP address of the EoE bridge |
|
30 # Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate |
|
31 # with devices on the EoE bridge. |
|
32 # |
|
33 #EOE_IP_ADDRESS=192.168.X.X |
|
34 |
|
35 # |
|
36 # IP netmask of the EoE bridge |
|
37 # See EOE_IP_ADDRESS. |
|
38 # |
|
39 #EOE_IP_NETMASK=255.255.255.0 |
|
40 |
|
41 # |
|
42 # Renew default gateway after bridge installation. |
|
43 # Set this to the new default gateway, if the default route shall |
|
44 # be renewed after the bridge has been installed. |
|
45 # |
|
46 #EOE_GATEWAY=192.168.X.X |
|
47 |
|
48 # |
|
49 # List of extra interfaces to include in the EoE bridge. |
|
50 # Set this to interconnect the EoE bridge with other local interfaces. |
|
51 # If EOE_BRIDGE is empty or undefined, setting this variable has no effect. |
|
52 # Important: The IP address of these interfaces will be cleared. Set |
|
53 # EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to |
|
54 # extra interfaces. |
|
55 # |
|
56 #EOE_EXTRA_INTERFACES=eth0 |
|
57 |
|
58 #------------------------------------------------------------------------------ |
|