diff -r 5fcbd29151d2 -r fa0af75bfbe9 script/sysconfig-file
--- a/script/sysconfig-file	Tue Feb 13 13:42:37 2007 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,58 +0,0 @@
-#------------------------------------------------------------------------------
-#
-#  EtherCAT sysconfig file
-#
-#  $Id$
-#
-#------------------------------------------------------------------------------
-
-#
-#  PCI index of the (RTL8139-)EtherCAT device
-#  Setting this is mandatory for the EtherCAT init script!
-#
-#DEVICE_INDEX=99
-
-#
-#  Number of Ethernet-over-EtherCAT interfaces every master shall create
-#  on startup. Default is 0.
-#
-#EOE_INTERFACES=0
-
-#
-#  Bridge all EoE interfaces after master startup
-#  This variable shall contain the name of the EoE bridge to set up.
-#  If the variable is empty or undefined, no EoE bridge will be built.
-#
-#EOE_BRIDGE=eoebr0
-
-#
-#  IP address of the EoE bridge
-#  Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate
-#  with devices on the EoE bridge.
-#
-#EOE_IP_ADDRESS=192.168.X.X
-
-#
-#  IP netmask of the EoE bridge
-#  See EOE_IP_ADDRESS.
-#
-#EOE_IP_NETMASK=255.255.255.0
-
-#
-#  Renew default gateway after bridge installation.
-#  Set this to the new default gateway, if the default route shall
-#  be renewed after the bridge has been installed.
-#
-#EOE_GATEWAY=192.168.X.X
-
-#
-#  List of extra interfaces to include in the EoE bridge.
-#  Set this to interconnect the EoE bridge with other local interfaces.
-#  If EOE_BRIDGE is empty or undefined, setting this variable has no effect.
-#  Important: The IP address of these interfaces will be cleared. Set
-#  EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to
-#  extra interfaces.
-#
-#EOE_EXTRA_INTERFACES=eth0
-
-#------------------------------------------------------------------------------