|
1 /******************************************************************************* |
|
2 |
|
3 Intel PRO/1000 Linux driver |
|
4 Copyright(c) 1999 - 2006 Intel Corporation. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms and conditions of the GNU General Public License, |
|
8 version 2, as published by the Free Software Foundation. |
|
9 |
|
10 This program is distributed in the hope it will be useful, but WITHOUT |
|
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
13 more details. |
|
14 |
|
15 You should have received a copy of the GNU General Public License along with |
|
16 this program; if not, write to the Free Software Foundation, Inc., |
|
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
|
18 |
|
19 The full GNU General Public License is included in this distribution in |
|
20 the file called "COPYING". |
|
21 |
|
22 Contact Information: |
|
23 Linux NICS <linux.nics@intel.com> |
|
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
26 |
|
27 *******************************************************************************/ |
|
28 |
|
29 #include "e1000.h" |
|
30 |
|
31 /* This is the only thing that needs to be changed to adjust the |
|
32 * maximum number of ports that the driver can manage. |
|
33 */ |
|
34 |
|
35 #define E1000_MAX_NIC 32 |
|
36 |
|
37 #define OPTION_UNSET -1 |
|
38 #define OPTION_DISABLED 0 |
|
39 #define OPTION_ENABLED 1 |
|
40 |
|
41 /* All parameters are treated the same, as an integer array of values. |
|
42 * This macro just reduces the need to repeat the same declaration code |
|
43 * over and over (plus this helps to avoid typo bugs). |
|
44 */ |
|
45 |
|
46 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } |
|
47 #define E1000_PARAM(X, desc) \ |
|
48 static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ |
|
49 static unsigned int num_##X; \ |
|
50 module_param_array_named(X, X, int, &num_##X, 0); \ |
|
51 MODULE_PARM_DESC(X, desc); |
|
52 |
|
53 /* Transmit Descriptor Count |
|
54 * |
|
55 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers |
|
56 * Valid Range: 80-4096 for 82544 and newer |
|
57 * |
|
58 * Default Value: 256 |
|
59 */ |
|
60 E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); |
|
61 |
|
62 /* Receive Descriptor Count |
|
63 * |
|
64 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers |
|
65 * Valid Range: 80-4096 for 82544 and newer |
|
66 * |
|
67 * Default Value: 256 |
|
68 */ |
|
69 E1000_PARAM(RxDescriptors, "Number of receive descriptors"); |
|
70 |
|
71 /* User Specified Speed Override |
|
72 * |
|
73 * Valid Range: 0, 10, 100, 1000 |
|
74 * - 0 - auto-negotiate at all supported speeds |
|
75 * - 10 - only link at 10 Mbps |
|
76 * - 100 - only link at 100 Mbps |
|
77 * - 1000 - only link at 1000 Mbps |
|
78 * |
|
79 * Default Value: 0 |
|
80 */ |
|
81 E1000_PARAM(Speed, "Speed setting"); |
|
82 |
|
83 /* User Specified Duplex Override |
|
84 * |
|
85 * Valid Range: 0-2 |
|
86 * - 0 - auto-negotiate for duplex |
|
87 * - 1 - only link at half duplex |
|
88 * - 2 - only link at full duplex |
|
89 * |
|
90 * Default Value: 0 |
|
91 */ |
|
92 E1000_PARAM(Duplex, "Duplex setting"); |
|
93 |
|
94 /* Auto-negotiation Advertisement Override |
|
95 * |
|
96 * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber) |
|
97 * |
|
98 * The AutoNeg value is a bit mask describing which speed and duplex |
|
99 * combinations should be advertised during auto-negotiation. |
|
100 * The supported speed and duplex modes are listed below |
|
101 * |
|
102 * Bit 7 6 5 4 3 2 1 0 |
|
103 * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10 |
|
104 * Duplex Full Full Half Full Half |
|
105 * |
|
106 * Default Value: 0x2F (copper); 0x20 (fiber) |
|
107 */ |
|
108 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); |
|
109 #define AUTONEG_ADV_DEFAULT 0x2F |
|
110 #define AUTONEG_ADV_MASK 0x2F |
|
111 |
|
112 /* User Specified Flow Control Override |
|
113 * |
|
114 * Valid Range: 0-3 |
|
115 * - 0 - No Flow Control |
|
116 * - 1 - Rx only, respond to PAUSE frames but do not generate them |
|
117 * - 2 - Tx only, generate PAUSE frames but ignore them on receive |
|
118 * - 3 - Full Flow Control Support |
|
119 * |
|
120 * Default Value: Read flow control settings from the EEPROM |
|
121 */ |
|
122 E1000_PARAM(FlowControl, "Flow Control setting"); |
|
123 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL |
|
124 |
|
125 /* XsumRX - Receive Checksum Offload Enable/Disable |
|
126 * |
|
127 * Valid Range: 0, 1 |
|
128 * - 0 - disables all checksum offload |
|
129 * - 1 - enables receive IP/TCP/UDP checksum offload |
|
130 * on 82543 and newer -based NICs |
|
131 * |
|
132 * Default Value: 1 |
|
133 */ |
|
134 E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); |
|
135 |
|
136 /* Transmit Interrupt Delay in units of 1.024 microseconds |
|
137 * Tx interrupt delay needs to typically be set to something non zero |
|
138 * |
|
139 * Valid Range: 0-65535 |
|
140 */ |
|
141 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); |
|
142 #define DEFAULT_TIDV 8 |
|
143 #define MAX_TXDELAY 0xFFFF |
|
144 #define MIN_TXDELAY 0 |
|
145 |
|
146 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds |
|
147 * |
|
148 * Valid Range: 0-65535 |
|
149 */ |
|
150 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); |
|
151 #define DEFAULT_TADV 32 |
|
152 #define MAX_TXABSDELAY 0xFFFF |
|
153 #define MIN_TXABSDELAY 0 |
|
154 |
|
155 /* Receive Interrupt Delay in units of 1.024 microseconds |
|
156 * hardware will likely hang if you set this to anything but zero. |
|
157 * |
|
158 * Valid Range: 0-65535 |
|
159 */ |
|
160 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); |
|
161 #define DEFAULT_RDTR 0 |
|
162 #define MAX_RXDELAY 0xFFFF |
|
163 #define MIN_RXDELAY 0 |
|
164 |
|
165 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds |
|
166 * |
|
167 * Valid Range: 0-65535 |
|
168 */ |
|
169 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); |
|
170 #define DEFAULT_RADV 8 |
|
171 #define MAX_RXABSDELAY 0xFFFF |
|
172 #define MIN_RXABSDELAY 0 |
|
173 |
|
174 /* Interrupt Throttle Rate (interrupts/sec) |
|
175 * |
|
176 * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) |
|
177 */ |
|
178 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); |
|
179 #define DEFAULT_ITR 3 |
|
180 #define MAX_ITR 100000 |
|
181 #define MIN_ITR 100 |
|
182 |
|
183 /* Enable Smart Power Down of the PHY |
|
184 * |
|
185 * Valid Range: 0, 1 |
|
186 * |
|
187 * Default Value: 0 (disabled) |
|
188 */ |
|
189 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); |
|
190 |
|
191 struct e1000_option { |
|
192 enum { enable_option, range_option, list_option } type; |
|
193 const char *name; |
|
194 const char *err; |
|
195 int def; |
|
196 union { |
|
197 struct { /* range_option info */ |
|
198 int min; |
|
199 int max; |
|
200 } r; |
|
201 struct { /* list_option info */ |
|
202 int nr; |
|
203 const struct e1000_opt_list { int i; char *str; } *p; |
|
204 } l; |
|
205 } arg; |
|
206 }; |
|
207 |
|
208 static int __devinit e1000_validate_option(unsigned int *value, |
|
209 const struct e1000_option *opt, |
|
210 struct e1000_adapter *adapter) |
|
211 { |
|
212 if (*value == OPTION_UNSET) { |
|
213 *value = opt->def; |
|
214 return 0; |
|
215 } |
|
216 |
|
217 switch (opt->type) { |
|
218 case enable_option: |
|
219 switch (*value) { |
|
220 case OPTION_ENABLED: |
|
221 e_dev_info("%s Enabled\n", opt->name); |
|
222 return 0; |
|
223 case OPTION_DISABLED: |
|
224 e_dev_info("%s Disabled\n", opt->name); |
|
225 return 0; |
|
226 } |
|
227 break; |
|
228 case range_option: |
|
229 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { |
|
230 e_dev_info("%s set to %i\n", opt->name, *value); |
|
231 return 0; |
|
232 } |
|
233 break; |
|
234 case list_option: { |
|
235 int i; |
|
236 const struct e1000_opt_list *ent; |
|
237 |
|
238 for (i = 0; i < opt->arg.l.nr; i++) { |
|
239 ent = &opt->arg.l.p[i]; |
|
240 if (*value == ent->i) { |
|
241 if (ent->str[0] != '\0') |
|
242 e_dev_info("%s\n", ent->str); |
|
243 return 0; |
|
244 } |
|
245 } |
|
246 } |
|
247 break; |
|
248 default: |
|
249 BUG(); |
|
250 } |
|
251 |
|
252 e_dev_info("Invalid %s value specified (%i) %s\n", |
|
253 opt->name, *value, opt->err); |
|
254 *value = opt->def; |
|
255 return -1; |
|
256 } |
|
257 |
|
258 static void e1000_check_fiber_options(struct e1000_adapter *adapter); |
|
259 static void e1000_check_copper_options(struct e1000_adapter *adapter); |
|
260 |
|
261 /** |
|
262 * e1000_check_options - Range Checking for Command Line Parameters |
|
263 * @adapter: board private structure |
|
264 * |
|
265 * This routine checks all command line parameters for valid user |
|
266 * input. If an invalid value is given, or if no user specified |
|
267 * value exists, a default value is used. The final value is stored |
|
268 * in a variable in the adapter structure. |
|
269 **/ |
|
270 |
|
271 void __devinit e1000_check_options(struct e1000_adapter *adapter) |
|
272 { |
|
273 struct e1000_option opt; |
|
274 int bd = adapter->bd_number; |
|
275 |
|
276 if (bd >= E1000_MAX_NIC) { |
|
277 e_dev_warn("Warning: no configuration for board #%i " |
|
278 "using defaults for all values\n", bd); |
|
279 } |
|
280 |
|
281 { /* Transmit Descriptor Count */ |
|
282 struct e1000_tx_ring *tx_ring = adapter->tx_ring; |
|
283 int i; |
|
284 e1000_mac_type mac_type = adapter->hw.mac_type; |
|
285 |
|
286 opt = (struct e1000_option) { |
|
287 .type = range_option, |
|
288 .name = "Transmit Descriptors", |
|
289 .err = "using default of " |
|
290 __MODULE_STRING(E1000_DEFAULT_TXD), |
|
291 .def = E1000_DEFAULT_TXD, |
|
292 .arg = { .r = { |
|
293 .min = E1000_MIN_TXD, |
|
294 .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD |
|
295 }} |
|
296 }; |
|
297 |
|
298 if (num_TxDescriptors > bd) { |
|
299 tx_ring->count = TxDescriptors[bd]; |
|
300 e1000_validate_option(&tx_ring->count, &opt, adapter); |
|
301 tx_ring->count = ALIGN(tx_ring->count, |
|
302 REQ_TX_DESCRIPTOR_MULTIPLE); |
|
303 } else { |
|
304 tx_ring->count = opt.def; |
|
305 } |
|
306 for (i = 0; i < adapter->num_tx_queues; i++) |
|
307 tx_ring[i].count = tx_ring->count; |
|
308 } |
|
309 { /* Receive Descriptor Count */ |
|
310 struct e1000_rx_ring *rx_ring = adapter->rx_ring; |
|
311 int i; |
|
312 e1000_mac_type mac_type = adapter->hw.mac_type; |
|
313 |
|
314 opt = (struct e1000_option) { |
|
315 .type = range_option, |
|
316 .name = "Receive Descriptors", |
|
317 .err = "using default of " |
|
318 __MODULE_STRING(E1000_DEFAULT_RXD), |
|
319 .def = E1000_DEFAULT_RXD, |
|
320 .arg = { .r = { |
|
321 .min = E1000_MIN_RXD, |
|
322 .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD |
|
323 }} |
|
324 }; |
|
325 |
|
326 if (num_RxDescriptors > bd) { |
|
327 rx_ring->count = RxDescriptors[bd]; |
|
328 e1000_validate_option(&rx_ring->count, &opt, adapter); |
|
329 rx_ring->count = ALIGN(rx_ring->count, |
|
330 REQ_RX_DESCRIPTOR_MULTIPLE); |
|
331 } else { |
|
332 rx_ring->count = opt.def; |
|
333 } |
|
334 for (i = 0; i < adapter->num_rx_queues; i++) |
|
335 rx_ring[i].count = rx_ring->count; |
|
336 } |
|
337 { /* Checksum Offload Enable/Disable */ |
|
338 opt = (struct e1000_option) { |
|
339 .type = enable_option, |
|
340 .name = "Checksum Offload", |
|
341 .err = "defaulting to Enabled", |
|
342 .def = OPTION_ENABLED |
|
343 }; |
|
344 |
|
345 if (num_XsumRX > bd) { |
|
346 unsigned int rx_csum = XsumRX[bd]; |
|
347 e1000_validate_option(&rx_csum, &opt, adapter); |
|
348 adapter->rx_csum = rx_csum; |
|
349 } else { |
|
350 adapter->rx_csum = opt.def; |
|
351 } |
|
352 } |
|
353 { /* Flow Control */ |
|
354 |
|
355 struct e1000_opt_list fc_list[] = |
|
356 {{ E1000_FC_NONE, "Flow Control Disabled" }, |
|
357 { E1000_FC_RX_PAUSE,"Flow Control Receive Only" }, |
|
358 { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" }, |
|
359 { E1000_FC_FULL, "Flow Control Enabled" }, |
|
360 { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; |
|
361 |
|
362 opt = (struct e1000_option) { |
|
363 .type = list_option, |
|
364 .name = "Flow Control", |
|
365 .err = "reading default settings from EEPROM", |
|
366 .def = E1000_FC_DEFAULT, |
|
367 .arg = { .l = { .nr = ARRAY_SIZE(fc_list), |
|
368 .p = fc_list }} |
|
369 }; |
|
370 |
|
371 if (num_FlowControl > bd) { |
|
372 unsigned int fc = FlowControl[bd]; |
|
373 e1000_validate_option(&fc, &opt, adapter); |
|
374 adapter->hw.fc = adapter->hw.original_fc = fc; |
|
375 } else { |
|
376 adapter->hw.fc = adapter->hw.original_fc = opt.def; |
|
377 } |
|
378 } |
|
379 { /* Transmit Interrupt Delay */ |
|
380 opt = (struct e1000_option) { |
|
381 .type = range_option, |
|
382 .name = "Transmit Interrupt Delay", |
|
383 .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), |
|
384 .def = DEFAULT_TIDV, |
|
385 .arg = { .r = { .min = MIN_TXDELAY, |
|
386 .max = MAX_TXDELAY }} |
|
387 }; |
|
388 |
|
389 if (num_TxIntDelay > bd) { |
|
390 adapter->tx_int_delay = TxIntDelay[bd]; |
|
391 e1000_validate_option(&adapter->tx_int_delay, &opt, |
|
392 adapter); |
|
393 } else { |
|
394 adapter->tx_int_delay = opt.def; |
|
395 } |
|
396 } |
|
397 { /* Transmit Absolute Interrupt Delay */ |
|
398 opt = (struct e1000_option) { |
|
399 .type = range_option, |
|
400 .name = "Transmit Absolute Interrupt Delay", |
|
401 .err = "using default of " __MODULE_STRING(DEFAULT_TADV), |
|
402 .def = DEFAULT_TADV, |
|
403 .arg = { .r = { .min = MIN_TXABSDELAY, |
|
404 .max = MAX_TXABSDELAY }} |
|
405 }; |
|
406 |
|
407 if (num_TxAbsIntDelay > bd) { |
|
408 adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; |
|
409 e1000_validate_option(&adapter->tx_abs_int_delay, &opt, |
|
410 adapter); |
|
411 } else { |
|
412 adapter->tx_abs_int_delay = opt.def; |
|
413 } |
|
414 } |
|
415 { /* Receive Interrupt Delay */ |
|
416 opt = (struct e1000_option) { |
|
417 .type = range_option, |
|
418 .name = "Receive Interrupt Delay", |
|
419 .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), |
|
420 .def = DEFAULT_RDTR, |
|
421 .arg = { .r = { .min = MIN_RXDELAY, |
|
422 .max = MAX_RXDELAY }} |
|
423 }; |
|
424 |
|
425 if (num_RxIntDelay > bd) { |
|
426 adapter->rx_int_delay = RxIntDelay[bd]; |
|
427 e1000_validate_option(&adapter->rx_int_delay, &opt, |
|
428 adapter); |
|
429 } else { |
|
430 adapter->rx_int_delay = opt.def; |
|
431 } |
|
432 } |
|
433 { /* Receive Absolute Interrupt Delay */ |
|
434 opt = (struct e1000_option) { |
|
435 .type = range_option, |
|
436 .name = "Receive Absolute Interrupt Delay", |
|
437 .err = "using default of " __MODULE_STRING(DEFAULT_RADV), |
|
438 .def = DEFAULT_RADV, |
|
439 .arg = { .r = { .min = MIN_RXABSDELAY, |
|
440 .max = MAX_RXABSDELAY }} |
|
441 }; |
|
442 |
|
443 if (num_RxAbsIntDelay > bd) { |
|
444 adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; |
|
445 e1000_validate_option(&adapter->rx_abs_int_delay, &opt, |
|
446 adapter); |
|
447 } else { |
|
448 adapter->rx_abs_int_delay = opt.def; |
|
449 } |
|
450 } |
|
451 { /* Interrupt Throttling Rate */ |
|
452 opt = (struct e1000_option) { |
|
453 .type = range_option, |
|
454 .name = "Interrupt Throttling Rate (ints/sec)", |
|
455 .err = "using default of " __MODULE_STRING(DEFAULT_ITR), |
|
456 .def = DEFAULT_ITR, |
|
457 .arg = { .r = { .min = MIN_ITR, |
|
458 .max = MAX_ITR }} |
|
459 }; |
|
460 |
|
461 if (num_InterruptThrottleRate > bd) { |
|
462 adapter->itr = InterruptThrottleRate[bd]; |
|
463 switch (adapter->itr) { |
|
464 case 0: |
|
465 e_dev_info("%s turned off\n", opt.name); |
|
466 break; |
|
467 case 1: |
|
468 e_dev_info("%s set to dynamic mode\n", |
|
469 opt.name); |
|
470 adapter->itr_setting = adapter->itr; |
|
471 adapter->itr = 20000; |
|
472 break; |
|
473 case 3: |
|
474 e_dev_info("%s set to dynamic conservative " |
|
475 "mode\n", opt.name); |
|
476 adapter->itr_setting = adapter->itr; |
|
477 adapter->itr = 20000; |
|
478 break; |
|
479 case 4: |
|
480 e_dev_info("%s set to simplified " |
|
481 "(2000-8000) ints mode\n", opt.name); |
|
482 adapter->itr_setting = adapter->itr; |
|
483 break; |
|
484 default: |
|
485 e1000_validate_option(&adapter->itr, &opt, |
|
486 adapter); |
|
487 /* save the setting, because the dynamic bits |
|
488 * change itr. |
|
489 * clear the lower two bits because they are |
|
490 * used as control */ |
|
491 adapter->itr_setting = adapter->itr & ~3; |
|
492 break; |
|
493 } |
|
494 } else { |
|
495 adapter->itr_setting = opt.def; |
|
496 adapter->itr = 20000; |
|
497 } |
|
498 } |
|
499 { /* Smart Power Down */ |
|
500 opt = (struct e1000_option) { |
|
501 .type = enable_option, |
|
502 .name = "PHY Smart Power Down", |
|
503 .err = "defaulting to Disabled", |
|
504 .def = OPTION_DISABLED |
|
505 }; |
|
506 |
|
507 if (num_SmartPowerDownEnable > bd) { |
|
508 unsigned int spd = SmartPowerDownEnable[bd]; |
|
509 e1000_validate_option(&spd, &opt, adapter); |
|
510 adapter->smart_power_down = spd; |
|
511 } else { |
|
512 adapter->smart_power_down = opt.def; |
|
513 } |
|
514 } |
|
515 |
|
516 switch (adapter->hw.media_type) { |
|
517 case e1000_media_type_fiber: |
|
518 case e1000_media_type_internal_serdes: |
|
519 e1000_check_fiber_options(adapter); |
|
520 break; |
|
521 case e1000_media_type_copper: |
|
522 e1000_check_copper_options(adapter); |
|
523 break; |
|
524 default: |
|
525 BUG(); |
|
526 } |
|
527 } |
|
528 |
|
529 /** |
|
530 * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version |
|
531 * @adapter: board private structure |
|
532 * |
|
533 * Handles speed and duplex options on fiber adapters |
|
534 **/ |
|
535 |
|
536 static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter) |
|
537 { |
|
538 int bd = adapter->bd_number; |
|
539 if (num_Speed > bd) { |
|
540 e_dev_info("Speed not valid for fiber adapters, parameter " |
|
541 "ignored\n"); |
|
542 } |
|
543 |
|
544 if (num_Duplex > bd) { |
|
545 e_dev_info("Duplex not valid for fiber adapters, parameter " |
|
546 "ignored\n"); |
|
547 } |
|
548 |
|
549 if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) { |
|
550 e_dev_info("AutoNeg other than 1000/Full is not valid for fiber" |
|
551 "adapters, parameter ignored\n"); |
|
552 } |
|
553 } |
|
554 |
|
555 /** |
|
556 * e1000_check_copper_options - Range Checking for Link Options, Copper Version |
|
557 * @adapter: board private structure |
|
558 * |
|
559 * Handles speed and duplex options on copper adapters |
|
560 **/ |
|
561 |
|
562 static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) |
|
563 { |
|
564 struct e1000_option opt; |
|
565 unsigned int speed, dplx, an; |
|
566 int bd = adapter->bd_number; |
|
567 |
|
568 { /* Speed */ |
|
569 static const struct e1000_opt_list speed_list[] = { |
|
570 { 0, "" }, |
|
571 { SPEED_10, "" }, |
|
572 { SPEED_100, "" }, |
|
573 { SPEED_1000, "" }}; |
|
574 |
|
575 opt = (struct e1000_option) { |
|
576 .type = list_option, |
|
577 .name = "Speed", |
|
578 .err = "parameter ignored", |
|
579 .def = 0, |
|
580 .arg = { .l = { .nr = ARRAY_SIZE(speed_list), |
|
581 .p = speed_list }} |
|
582 }; |
|
583 |
|
584 if (num_Speed > bd) { |
|
585 speed = Speed[bd]; |
|
586 e1000_validate_option(&speed, &opt, adapter); |
|
587 } else { |
|
588 speed = opt.def; |
|
589 } |
|
590 } |
|
591 { /* Duplex */ |
|
592 static const struct e1000_opt_list dplx_list[] = { |
|
593 { 0, "" }, |
|
594 { HALF_DUPLEX, "" }, |
|
595 { FULL_DUPLEX, "" }}; |
|
596 |
|
597 opt = (struct e1000_option) { |
|
598 .type = list_option, |
|
599 .name = "Duplex", |
|
600 .err = "parameter ignored", |
|
601 .def = 0, |
|
602 .arg = { .l = { .nr = ARRAY_SIZE(dplx_list), |
|
603 .p = dplx_list }} |
|
604 }; |
|
605 |
|
606 if (num_Duplex > bd) { |
|
607 dplx = Duplex[bd]; |
|
608 e1000_validate_option(&dplx, &opt, adapter); |
|
609 } else { |
|
610 dplx = opt.def; |
|
611 } |
|
612 } |
|
613 |
|
614 if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) { |
|
615 e_dev_info("AutoNeg specified along with Speed or Duplex, " |
|
616 "parameter ignored\n"); |
|
617 adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; |
|
618 } else { /* Autoneg */ |
|
619 static const struct e1000_opt_list an_list[] = |
|
620 #define AA "AutoNeg advertising " |
|
621 {{ 0x01, AA "10/HD" }, |
|
622 { 0x02, AA "10/FD" }, |
|
623 { 0x03, AA "10/FD, 10/HD" }, |
|
624 { 0x04, AA "100/HD" }, |
|
625 { 0x05, AA "100/HD, 10/HD" }, |
|
626 { 0x06, AA "100/HD, 10/FD" }, |
|
627 { 0x07, AA "100/HD, 10/FD, 10/HD" }, |
|
628 { 0x08, AA "100/FD" }, |
|
629 { 0x09, AA "100/FD, 10/HD" }, |
|
630 { 0x0a, AA "100/FD, 10/FD" }, |
|
631 { 0x0b, AA "100/FD, 10/FD, 10/HD" }, |
|
632 { 0x0c, AA "100/FD, 100/HD" }, |
|
633 { 0x0d, AA "100/FD, 100/HD, 10/HD" }, |
|
634 { 0x0e, AA "100/FD, 100/HD, 10/FD" }, |
|
635 { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" }, |
|
636 { 0x20, AA "1000/FD" }, |
|
637 { 0x21, AA "1000/FD, 10/HD" }, |
|
638 { 0x22, AA "1000/FD, 10/FD" }, |
|
639 { 0x23, AA "1000/FD, 10/FD, 10/HD" }, |
|
640 { 0x24, AA "1000/FD, 100/HD" }, |
|
641 { 0x25, AA "1000/FD, 100/HD, 10/HD" }, |
|
642 { 0x26, AA "1000/FD, 100/HD, 10/FD" }, |
|
643 { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" }, |
|
644 { 0x28, AA "1000/FD, 100/FD" }, |
|
645 { 0x29, AA "1000/FD, 100/FD, 10/HD" }, |
|
646 { 0x2a, AA "1000/FD, 100/FD, 10/FD" }, |
|
647 { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" }, |
|
648 { 0x2c, AA "1000/FD, 100/FD, 100/HD" }, |
|
649 { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" }, |
|
650 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" }, |
|
651 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }}; |
|
652 |
|
653 opt = (struct e1000_option) { |
|
654 .type = list_option, |
|
655 .name = "AutoNeg", |
|
656 .err = "parameter ignored", |
|
657 .def = AUTONEG_ADV_DEFAULT, |
|
658 .arg = { .l = { .nr = ARRAY_SIZE(an_list), |
|
659 .p = an_list }} |
|
660 }; |
|
661 |
|
662 if (num_AutoNeg > bd) { |
|
663 an = AutoNeg[bd]; |
|
664 e1000_validate_option(&an, &opt, adapter); |
|
665 } else { |
|
666 an = opt.def; |
|
667 } |
|
668 adapter->hw.autoneg_advertised = an; |
|
669 } |
|
670 |
|
671 switch (speed + dplx) { |
|
672 case 0: |
|
673 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
674 if ((num_Speed > bd) && (speed != 0 || dplx != 0)) |
|
675 e_dev_info("Speed and duplex autonegotiation " |
|
676 "enabled\n"); |
|
677 break; |
|
678 case HALF_DUPLEX: |
|
679 e_dev_info("Half Duplex specified without Speed\n"); |
|
680 e_dev_info("Using Autonegotiation at Half Duplex only\n"); |
|
681 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
682 adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | |
|
683 ADVERTISE_100_HALF; |
|
684 break; |
|
685 case FULL_DUPLEX: |
|
686 e_dev_info("Full Duplex specified without Speed\n"); |
|
687 e_dev_info("Using Autonegotiation at Full Duplex only\n"); |
|
688 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
689 adapter->hw.autoneg_advertised = ADVERTISE_10_FULL | |
|
690 ADVERTISE_100_FULL | |
|
691 ADVERTISE_1000_FULL; |
|
692 break; |
|
693 case SPEED_10: |
|
694 e_dev_info("10 Mbps Speed specified without Duplex\n"); |
|
695 e_dev_info("Using Autonegotiation at 10 Mbps only\n"); |
|
696 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
697 adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | |
|
698 ADVERTISE_10_FULL; |
|
699 break; |
|
700 case SPEED_10 + HALF_DUPLEX: |
|
701 e_dev_info("Forcing to 10 Mbps Half Duplex\n"); |
|
702 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
703 adapter->hw.forced_speed_duplex = e1000_10_half; |
|
704 adapter->hw.autoneg_advertised = 0; |
|
705 break; |
|
706 case SPEED_10 + FULL_DUPLEX: |
|
707 e_dev_info("Forcing to 10 Mbps Full Duplex\n"); |
|
708 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
709 adapter->hw.forced_speed_duplex = e1000_10_full; |
|
710 adapter->hw.autoneg_advertised = 0; |
|
711 break; |
|
712 case SPEED_100: |
|
713 e_dev_info("100 Mbps Speed specified without Duplex\n"); |
|
714 e_dev_info("Using Autonegotiation at 100 Mbps only\n"); |
|
715 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
716 adapter->hw.autoneg_advertised = ADVERTISE_100_HALF | |
|
717 ADVERTISE_100_FULL; |
|
718 break; |
|
719 case SPEED_100 + HALF_DUPLEX: |
|
720 e_dev_info("Forcing to 100 Mbps Half Duplex\n"); |
|
721 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
722 adapter->hw.forced_speed_duplex = e1000_100_half; |
|
723 adapter->hw.autoneg_advertised = 0; |
|
724 break; |
|
725 case SPEED_100 + FULL_DUPLEX: |
|
726 e_dev_info("Forcing to 100 Mbps Full Duplex\n"); |
|
727 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
728 adapter->hw.forced_speed_duplex = e1000_100_full; |
|
729 adapter->hw.autoneg_advertised = 0; |
|
730 break; |
|
731 case SPEED_1000: |
|
732 e_dev_info("1000 Mbps Speed specified without Duplex\n"); |
|
733 goto full_duplex_only; |
|
734 case SPEED_1000 + HALF_DUPLEX: |
|
735 e_dev_info("Half Duplex is not supported at 1000 Mbps\n"); |
|
736 /* fall through */ |
|
737 case SPEED_1000 + FULL_DUPLEX: |
|
738 full_duplex_only: |
|
739 e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex " |
|
740 "only\n"); |
|
741 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
742 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; |
|
743 break; |
|
744 default: |
|
745 BUG(); |
|
746 } |
|
747 |
|
748 /* Speed, AutoNeg and MDI/MDI-X must all play nice */ |
|
749 if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) { |
|
750 e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. " |
|
751 "Setting MDI-X to a compatible value.\n"); |
|
752 } |
|
753 } |
|
754 |