Wed, 07 Dec 2016 19:25:58 +0300always load existing PLC program from the working directory
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:25:58 +0300] rev 1597
always load existing PLC program from the working directory

Wed, 07 Dec 2016 19:24:16 +0300stop PLC before unloading
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:24:16 +0300] rev 1596
stop PLC before unloading


This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).

In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE

Wed, 07 Dec 2016 18:32:34 +0300add internatialization support for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:32:34 +0300] rev 1595
add internatialization support for Beremiz_service.py

Wed, 07 Dec 2016 18:25:37 +0300fix issue with changing annonced Pyro service name via taskbar icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:25:37 +0300] rev 1594
fix issue with changing annonced Pyro service name via taskbar icon

Wed, 07 Dec 2016 18:23:59 +0300don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:23:59 +0300] rev 1593
don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously


By default IP is not set (None) and service listen only on localhost interface.

Wed, 07 Dec 2016 18:15:04 +0300start/stop from taskbar icon only if PLC is stopped/started
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:15:04 +0300] rev 1592
start/stop from taskbar icon only if PLC is stopped/started

Wed, 07 Dec 2016 17:54:41 +0300close Pyro socket after daemon stop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:54:41 +0300] rev 1591
close Pyro socket after daemon stop


without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.

Wed, 07 Dec 2016 17:51:20 +0300add python-wxgtk3.0 support to Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:51:20 +0300] rev 1590
add python-wxgtk3.0 support to Beremiz_service.py

Fri, 02 Dec 2016 17:48:26 +0300make about dialog on Windows not so big
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Dec 2016 17:48:26 +0300] rev 1589
make about dialog on Windows not so big


It was automatically expanded to place description in one line.

Thu, 01 Dec 2016 18:31:10 +0300update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:31:10 +0300] rev 1588
update Russian translation

Thu, 01 Dec 2016 18:30:34 +0300add i18n to PLC status
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:30:34 +0300] rev 1587
add i18n to PLC status

Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.

Thu, 01 Dec 2016 16:59:16 +0300remove clear and reset execution order buttons in popup menu in SFC and LD viewers.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:59:16 +0300] rev 1586
remove clear and reset execution order buttons in popup menu in SFC and LD viewers.

Thu, 01 Dec 2016 16:52:28 +0300fix initial(equal to the min) number of sequences in SFC Divergence dialog.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:52:28 +0300] rev 1585
fix initial(equal to the min) number of sequences in SFC Divergence dialog.

Thu, 01 Dec 2016 16:40:49 +0300make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:40:49 +0300] rev 1584
make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer

Wed, 30 Nov 2016 14:27:18 +0300move EnhancedStatusBar.py to the right location
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 30 Nov 2016 14:27:18 +0300] rev 1583
move EnhancedStatusBar.py to the right location

Tue, 29 Nov 2016 11:41:09 +0300add internatialization support to startup messages during checking software updates
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 29 Nov 2016 11:41:09 +0300] rev 1582
add internatialization support to startup messages during checking software updates

Mon, 28 Nov 2016 16:47:01 +0300fix translation strings with multiple parameters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:47:01 +0300] rev 1581
fix translation strings with multiple parameters


this fixes a lot of warnings given by msgmerge:

../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,

Mon, 28 Nov 2016 16:27:24 +0300change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:27:24 +0300] rev 1580
change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net

make error message to be the same as in Beremiz IDE

Mon, 28 Nov 2016 16:12:27 +0300fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:12:27 +0300] rev 1579
fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file

closes #11

Thu, 24 Nov 2016 18:33:56 +0300add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 18:33:56 +0300] rev 1578
add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop

Thu, 24 Nov 2016 15:46:17 +0300fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:46:17 +0300] rev 1577
fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).

It's not neccessary to carry about label size. YToRow() does the work.

Thu, 24 Nov 2016 15:37:03 +0300increase size for time buttons in LogViewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:37:03 +0300] rev 1576
increase size for time buttons in LogViewer

The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12

Thu, 24 Nov 2016 13:17:06 +0300don't rebuild the makefile based project if only companyName, projectName or productName are changed
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 13:17:06 +0300] rev 1575
don't rebuild the makefile based project if only companyName, projectName or productName are changed

And this fix current encoding issues, because all these information fields can
contain non-latin characters.

Tue, 22 Nov 2016 18:42:48 +0300add progress bar to status bar
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Nov 2016 18:42:48 +0300] rev 1574
add progress bar to status bar

It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.

Sat, 19 Nov 2016 23:42:49 +0100fix warning: 'return' with no value in function startPLC
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 23:42:49 +0100] rev 1573
fix warning: 'return' with no value in function startPLC

Sat, 19 Nov 2016 22:20:19 +0100fix inconsistent whitespace
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 22:20:19 +0100] rev 1572
fix inconsistent whitespace

Fri, 18 Nov 2016 13:57:42 +0300fix license notices in source files and license files under GPLv2+
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Nov 2016 13:57:42 +0300] rev 1571
fix license notices in source files and license files under GPLv2+

Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.

Thu, 17 Nov 2016 22:57:20 +0300fix PLC autostart option for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:57:20 +0300] rev 1570
fix PLC autostart option for Beremiz_service.py

Thu, 17 Nov 2016 22:41:41 +0300remove old debug code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:41:41 +0300] rev 1569
remove old debug code

Thu, 17 Nov 2016 14:11:48 +0300fix wrong font family in CustromGrid control
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 14:11:48 +0300] rev 1568
fix wrong font family in CustromGrid control

closes #10

Thu, 17 Nov 2016 14:04:44 +0300now only correct chart can be created in SFC Viewer
Sergey Surkov <surkovsv93@gmail.com> [Thu, 17 Nov 2016 14:04:44 +0300] rev 1567
now only correct chart can be created in SFC Viewer

if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red

Thu, 17 Nov 2016 13:48:36 +0300add Russian translations for About dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:36 +0300] rev 1566
add Russian translations for About dialogs

Thu, 17 Nov 2016 13:48:04 +0300make about dialog boxes use standard wx about dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:04 +0300] rev 1565
make about dialog boxes use standard wx about dialogs

Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.

Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.

Tue, 08 Nov 2016 18:14:30 +0300fix highlighting error and warning messages with non-lating characters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:14:30 +0300] rev 1564
fix highlighting error and warning messages with non-lating characters

Tue, 08 Nov 2016 18:06:30 +0300fix breaking non-latin description and comments in FBD, LD, SFC and
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:06:30 +0300] rev 1563
fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation

Wed, 02 Nov 2016 14:23:24 +0300fix borders of pull-down choice list box in Config tab, in Project Properties
Sergey Surkov <surkovsv93@gmail.com> [Wed, 02 Nov 2016 14:23:24 +0300] rev 1562
fix borders of pull-down choice list box in Config tab, in Project Properties

Tue, 01 Nov 2016 14:44:22 +0300add version.py needed for previous commit '4ce8492'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:44:22 +0300] rev 1561
add version.py needed for previous commit '4ce8492'

Tue, 01 Nov 2016 14:03:14 +0300add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:03:14 +0300] rev 1560
add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor

Mon, 31 Oct 2016 13:59:56 +0300ignore generated bugreports and output of i18n script
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 31 Oct 2016 13:59:56 +0300] rev 1559
ignore generated bugreports and output of i18n script

Fri, 28 Oct 2016 18:28:10 +0300now dialogs Find and Search in Project can be closed with ESC button
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:28:10 +0300] rev 1558
now dialogs Find and Search in Project can be closed with ESC button

Fri, 28 Oct 2016 18:17:35 +0300fix russian translation of "direction" in Find dialog
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:17:35 +0300] rev 1557
fix russian translation of "direction" in Find dialog

Fri, 28 Oct 2016 18:11:43 +0300fix major bugs in Find and Search in Project functionality.
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:11:43 +0300] rev 1556
fix major bugs in Find and Search in Project functionality.

fix case sensitive and regexp search, remove duplicating code

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 28 Oct 2016 17:21:42 +0300fix issue with non-updated button 'generated IECCode' after Build and Clean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Oct 2016 17:21:42 +0300] rev 1555
fix issue with non-updated button 'generated IECCode' after Build and Clean

Thu, 27 Oct 2016 17:07:44 +0300increase dialog size for edit SFC transition, so buttons are visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 17:07:44 +0300] rev 1554
increase dialog size for edit SFC transition, so buttons are visible

Thu, 27 Oct 2016 16:24:13 +0300fix issue that sometimes period for cyclic task wasn't saved.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 16:24:13 +0300] rev 1553
fix issue that sometimes period for cyclic task wasn't saved.

This is complete fix for the problem described in 8626bba.

Thu, 27 Oct 2016 15:31:43 +0300add first steps example, that shows how use all IEC 61131 languages
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 15:31:43 +0300] rev 1552
add first steps example, that shows how use all IEC 61131 languages

Wed, 26 Oct 2016 19:13:26 +0300fix issue with empty frame with generated ST code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 19:13:26 +0300] rev 1551
fix issue with empty frame with generated ST code

Wed, 26 Oct 2016 15:51:20 +0300fix not saving location address from variable panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 15:51:20 +0300] rev 1550
fix not saving location address from variable panel

this regression was introduced by commit 3518d10

Mon, 24 Oct 2016 18:02:53 +0300add $(Beremiz installation)/mingw/bin in PATH on Windows platform
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 24 Oct 2016 18:02:53 +0300] rev 1549
add $(Beremiz installation)/mingw/bin in PATH on Windows platform

This fixes issue if multiple gcc installation are found in user's
PATH. Now gcc from Beremiz is used by default.

Fri, 21 Oct 2016 13:06:31 +0300fix issue with non-working global hotkeys in IEC code panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 21 Oct 2016 13:06:31 +0300] rev 1548
fix issue with non-working global hotkeys in IEC code panel

Thu, 20 Oct 2016 14:45:27 +0300add more comments to svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:27 +0300] rev 1547
add more comments to svgui example

Thu, 20 Oct 2016 14:45:11 +0300cleanup traffic lights example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 20 Oct 2016 14:45:11 +0300] rev 1546
cleanup traffic lights example

Wed, 19 Oct 2016 16:32:10 +0300cleanup svgui example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 19 Oct 2016 16:32:10 +0300] rev 1545
cleanup svgui example

Tue, 18 Oct 2016 17:44:08 +0300Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Sergey Surkov <surkovsv93@gmail.com> [Tue, 18 Oct 2016 17:44:08 +0300] rev 1544
Fix bug with two or more wires connected to one input. Now only one wire can be connected to one input, except BOOLean signals in LD and SFC. If user trying to connect wire with already connected input, wire highlight will become red.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

Fri, 14 Oct 2016 18:04:22 +0300fix issue with sequence of multiple whitespaces in makefile command
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 18:04:22 +0300] rev 1543
fix issue with sequence of multiple whitespaces in makefile command
line from project configuration

for every additional whitespace '""' was inserted in result command line.

Fri, 14 Oct 2016 14:03:38 +0300fix minor issue and do some cleanup work in genericmake example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 14 Oct 2016 14:03:38 +0300] rev 1542
fix minor issue and do some cleanup work in genericmake example