Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:44:30 +0300] rev 1605
fix issue that in Debug mode LD instance doesn't show correctly its state after
continuation of FBD_Connector.
Previously state signals doesn't propogate through FBD_Connector.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:36:04 +0300] rev 1604
fix issue with task rename if "Name" column label is translated into
other language
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 14 Dec 2016 12:31:06 +0300] rev 1603
fix issue with compiling SFC POU with non-connected transition (type "connection")
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:47:34 +0300] rev 1602
fix bug with recent projects menu, remove path to the project from menu, if project directory doesn't exist
Sergey Surkov <surkovsv93@gmail.com> [Tue, 13 Dec 2016 17:40:03 +0300] rev 1601
fix bug with empty directories in recent projects menu
remove path to a project from recent projects menu, if project directory is empty
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Dec 2016 14:29:40 +0300] rev 1600
fix list of recent projects in File menu, add path to current project after Save As
Sergey Surkov <surkovsv93@gmail.com> [Thu, 08 Dec 2016 17:54:43 +0300] rev 1599
by default init input and output in step sfc block, and output for initial step sfc block
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:28:13 +0300] rev 1598
update PLC status after initialization
This is necessary especially if existed PLC program is loaded, but PLC
is not started automatically. In this case taskbar icon shows that PLC
isn't empty.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:25:58 +0300] rev 1597
always load existing PLC program from the working directory
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 19:24:16 +0300] rev 1596
stop PLC before unloading
This fixes segmentation fault if service was quit without stopping it.
It has happened if Beremiz service was quit using taskbar icon or by
closing Beremiz IDE (in case of autostarted local service).
In second case to trigger the bug following step has to be done:
1. Open Beremiz IDE
2. Open project, compile and connect to LOCAL:// runtime
3. Transfer and start the PLC program
4. Open other project without disconneting the PLC runtime
5. Close Beremiz IDE
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:32:34 +0300] rev 1595
add internatialization support for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:25:37 +0300] rev 1594
fix issue with changing annonced Pyro service name via taskbar icon
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:23:59 +0300] rev 1593
don't crash on trying to change IP interface for Beremiz_service using taskbar icon if IP wasn't previously
By default IP is not set (None) and service listen only on localhost interface.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 18:15:04 +0300] rev 1592
start/stop from taskbar icon only if PLC is stopped/started
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:54:41 +0300] rev 1591
close Pyro socket after daemon stop
without that socket port is open after daemon shutdown.
As a result if you restart daemon with new settings (service name, for example),
it can't listen on already used port and opens the next free TCP port
regardless of requested settings.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 07 Dec 2016 17:51:20 +0300] rev 1590
add python-wxgtk3.0 support to Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 02 Dec 2016 17:48:26 +0300] rev 1589
make about dialog on Windows not so big
It was automatically expanded to place description in one line.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:31:10 +0300] rev 1588
update Russian translation
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 01 Dec 2016 18:30:34 +0300] rev 1587
add i18n to PLC status
Extra strings are added to the code to make mki18n.py to find these
strings in source files and put them into i18n/messages.pot.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:59:16 +0300] rev 1586
remove clear and reset execution order buttons in popup menu in SFC and LD viewers.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:52:28 +0300] rev 1585
fix initial(equal to the min) number of sequences in SFC Divergence dialog.
Sergey Surkov <surkovsv93@gmail.com> [Thu, 01 Dec 2016 16:40:49 +0300] rev 1584
make only correct blocks(by IEC 61131-3 standard) available in wire popup menu in SFC Viewer
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 30 Nov 2016 14:27:18 +0300] rev 1583
move EnhancedStatusBar.py to the right location
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 29 Nov 2016 11:41:09 +0300] rev 1582
add internatialization support to startup messages during checking software updates
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:47:01 +0300] rev 1581
fix translation strings with multiple parameters
this fixes a lot of warnings given by msgmerge:
../PLCOpenEditor.py:196: warning: 'msgid' format string with unnamed arguments cannot be properly localized:
The translator cannot reorder the arguments.
Please consider using a format string with named arguments,
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:27:24 +0300] rev 1580
change bug report address for PLCOpenEditor to beremiz-devel@lists.sourceforge.net
make error message to be the same as in Beremiz IDE
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 28 Nov 2016 16:12:27 +0300] rev 1579
fix segmentation fault on clicking red point in compilation console if that compilation error coverts several units in plcopen file
closes #11
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 18:33:56 +0300] rev 1578
add localization to time strings in DebugVariablePanel and to dialog shown after variable drag'n'drop
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:46:17 +0300] rev 1577
fix issue that if located variable was dropped in location column, then address was changed in wrong row (row - 1).
It's not neccessary to carry about label size. YToRow() does the work.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 15:37:03 +0300] rev 1576
increase size for time buttons in LogViewer
The buttons are slightly bigger now. This gives more space for label
translations in other languages.
closes #12
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 24 Nov 2016 13:17:06 +0300] rev 1575
don't rebuild the makefile based project if only companyName, projectName or productName are changed
And this fix current encoding issues, because all these information fields can
contain non-latin characters.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 Nov 2016 18:42:48 +0300] rev 1574
add progress bar to status bar
It can be used to display progress during program upload.
To use it call ShowPLCProgress (like ShowPLCProgress("transfered",
10)) in your PLCObject implementation.
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 23:42:49 +0100] rev 1573
fix warning: 'return' with no value in function startPLC
ctbenergy <ewald.weinahndl@gmail.com> [Sat, 19 Nov 2016 22:20:19 +0100] rev 1572
fix inconsistent whitespace
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 18 Nov 2016 13:57:42 +0300] rev 1571
fix license notices in source files and license files under GPLv2+
Previously a lot of files were referenced to GNU Public License 2.1,
which never existed.
All copyright attributions are kept the same.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:57:20 +0300] rev 1570
fix PLC autostart option for Beremiz_service.py
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 22:41:41 +0300] rev 1569
remove old debug code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 14:11:48 +0300] rev 1568
fix wrong font family in CustromGrid control
closes #10
Sergey Surkov <surkovsv93@gmail.com> [Thu, 17 Nov 2016 14:04:44 +0300] rev 1567
now only correct chart can be created in SFC Viewer
if user trying to connect incompatible blocks (by IEC 61131-3 standard), wire highlight will become red
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:36 +0300] rev 1566
add Russian translations for About dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 17 Nov 2016 13:48:04 +0300] rev 1565
make about dialog boxes use standard wx about dialogs
Any information in dialog can be easily changed without much effort
and the dialog can be easy translated.
Unfortunately on Windows there is no good standard about dialog,
therefore own implementation is used there.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:14:30 +0300] rev 1564
fix highlighting error and warning messages with non-lating characters
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 08 Nov 2016 18:06:30 +0300] rev 1563
fix breaking non-latin description and comments in FBD, LD, SFC and
project settings after Undo operation
Sergey Surkov <surkovsv93@gmail.com> [Wed, 02 Nov 2016 14:23:24 +0300] rev 1562
fix borders of pull-down choice list box in Config tab, in Project Properties
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:44:22 +0300] rev 1561
add version.py needed for previous commit '4ce8492'
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 01 Nov 2016 14:03:14 +0300] rev 1560
add version with commit hash to 'About' dialogs for Beremiz IDE and PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 31 Oct 2016 13:59:56 +0300] rev 1559
ignore generated bugreports and output of i18n script
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:28:10 +0300] rev 1558
now dialogs Find and Search in Project can be closed with ESC button
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:17:35 +0300] rev 1557
fix russian translation of "direction" in Find dialog
Sergey Surkov <surkovsv93@gmail.com> [Fri, 28 Oct 2016 18:11:43 +0300] rev 1556
fix major bugs in Find and Search in Project functionality.
fix case sensitive and regexp search, remove duplicating code
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 28 Oct 2016 17:21:42 +0300] rev 1555
fix issue with non-updated button 'generated IECCode' after Build and Clean
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 17:07:44 +0300] rev 1554
increase dialog size for edit SFC transition, so buttons are visible
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 16:24:13 +0300] rev 1553
fix issue that sometimes period for cyclic task wasn't saved.
This is complete fix for the problem described in 8626bba.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 27 Oct 2016 15:31:43 +0300] rev 1552
add first steps example, that shows how use all IEC 61131 languages
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 19:13:26 +0300] rev 1551
fix issue with empty frame with generated ST code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 26 Oct 2016 15:51:20 +0300] rev 1550
fix not saving location address from variable panel
this regression was introduced by commit 3518d10