MQTT: take C part away from python code for readability.
C lines change a bit because of unnecessary escaping for '\'.
#include "canfestival.h"
#include "dcf.h"
/* CanFestival nodes generated OD headers*/
%(nodes_includes)s
#define BOARD_DECL(nodename, busname, baudrate)\
s_BOARD nodename##Board = {busname, baudrate};
/* CAN channels declaration */
%(board_decls)s
/* Keep track of init level to cleanup correctly */
static int init_level=0;
/* Retrieve PLC cycle time */
extern unsigned long long common_ticktime__;
/* Per master node slavebootup callbacks. Checks that
* every node have booted before calling Master_post_SlaveBootup */
%(slavebootups)s
/* One slave node post_sync callback.
* Used to align PLC tick-time on CANopen SYNC
*/
%(post_sync)s
/* Triggers DCF transission
*/
%(pre_op)s
#define NODE_FORCE_SYNC(nodename) \
/* Artificially force sync state to 1 so that it is not started */\
nodename##_Data.CurrentCommunicationState.csSYNC = -1;\
/* Force sync period to common_ticktime__ so that other node can read it*/\
*nodename##_Data.COB_ID_Sync = 0x40000080;\
*nodename##_Data.Sync_Cycle_Period = common_ticktime__ / 1000;
static void DeferedInitAlarm(CO_Data* d, UNS32 id){
/* Node will start beeing active on the network after this */
setState(d, Initialisation);
}
#define NODE_INIT(nodename, nodeid) \
/* Defining the node Id */\
setNodeId(&nodename##_Data, nodeid);\
SetAlarm(&nodename##_Data,0,&DeferedInitAlarm,MS_TO_TIMEVAL(100),0);
#define NODE_MASTER_INIT(nodename, nodeid) \
NODE_FORCE_SYNC(nodename) \
NODE_INIT(nodename, nodeid)
#define NODE_SLAVE_INIT(nodename, nodeid) \
NODE_INIT(nodename, nodeid)
static void InitNodes(CO_Data* d, UNS32 id)
{
%(slavebootup_register)s
%(post_sync_register)s
%(pre_op_register)s
%(nodes_init)s
}
#define NODE_STOP(nodename) \
if(init_level-- > 0)\
{\
masterSendNMTstateChange(&nodename##_Data, 0, NMT_Reset_Node);\
setState(&nodename##_Data, Stopped);\
}
static void Exit(CO_Data* d, UNS32 id)
{
%(nodes_stop)s
}
#define NODE_CLOSE(nodename) \
if(init_level_c-- > 0)\
{\
canClose(&nodename##_Data);\
}
void __cleanup_%(locstr)s(void)
{
// Stop timer thread
if(init_level-- > 0){
int init_level_c = init_level;
StopTimerLoop(&Exit);
%(nodes_close)s
}
TimerCleanup();
}
#ifndef stderr
#define fprintf(...)
#define fflush(...)
#endif
#define NODE_OPEN(nodename)\
if(!canOpen(&nodename##Board,&nodename##_Data)){\
fprintf(stderr,"Cannot open CAN intefrace %%s at speed %%s\n for CANopen node \"" #nodename "\"",nodename##Board.busname, nodename##Board.baudrate);\
fflush(stderr);\
return -1;\
}\
init_level++;
/*************************** INIT *****************************************/
int __init_%(locstr)s(int argc,char **argv)
{
#ifndef NOT_USE_DYNAMIC_LOADING
if( !LoadCanDriver("%(candriver)s") ){
fprintf(stderr, "Cannot load CAN interface library for CanFestival (%(candriver)s)\n");\
fflush(stderr);\
return -1;\
}
#endif
TimerInit();
%(nodes_open)s
// Start timer thread
StartTimerLoop(&InitNodes);
init_level++;
return 0;
}
#define NODE_SEND_SYNC(nodename)\
if(getState(&nodename##_Data)==Operational){\
sendSYNCMessage(&nodename##_Data);\
}
void __retrieve_%(locstr)s(void)
{
/* Locks the stack, so that no changes occurs while PLC access variables
* TODO : implement buffers to avoid such a big lock
* */
EnterMutex();
/* Send Sync */
%(nodes_send_sync)s
}
#define NODE_PROCEED_SYNC(nodename)\
proceedSYNC(&nodename##_Data);
void __publish_%(locstr)s(void)
{
/* Process sync event */
%(nodes_proceed_sync)s
LeaveMutex();
}