use pregenerated CRC32 lookup tables for retain on Win32 and GNU/Linux

This code could be possible reused on low-end targets with limited RAM.

code to generate lookup table:
[---------------------------------------------------------------------]

/* CRC lookup table and initial state. */
uint32_t crc32_table[256];

/* Generate CRC32 lookup table. */
void GenerateCRC32Table(void)
{
unsigned int i, j;
/* Use CRC-32-IEEE 802.3 polynomial 0x04C11DB7 (bit reflected). */
uint32_t poly = 0xEDB88320;

for (i = 0; i <= 0xFF; i++)
{
uint32_t c = i;
for (j = 0 ; j < 8 ; j++)
c = (c & 1) ? (c >> 1 ) ^ poly : (c >> 1);
crc32_table[i] = c;
}
}

void main(void)
{
GenerateCRC32Table();
int j=0;
for(int i=0; i<256; i++) {
printf("0x%08X, ", crc32_table[i]);
if (++j >= 8) {
j = 0;
printf("\n");
}
}
}
[---------------------------------------------------------------------]

Beremiz installation 
====================

Windows
-------
Download installer, install. 

Linux
-----
Pre-requisites::

    # Ubuntu/Debian :
    sudo apt-get install python-wxgtk2.8 pyro mercurial
    sudo apt-get install build-essential bison flex python-numpy python-nevow

Prepare::

    mkdir ~/Beremiz
    cd ~/Beremiz

Get Source Code::

    cd ~/Beremiz
    
    hg clone http://dev.automforge.net/beremiz
    hg clone http://dev.automforge.net/plcopeneditor
    hg clone http://dev.automforge.net/matiec

Build MatIEC compiler::

    cd ~/Beremiz/matiec
    ./configure
    make

Build CanFestival (optional):: 

    # Only needed for CANopen support. Please read CanFestival 
    # manual to choose CAN interface other than 'virtual'::

    cd ~/Beremiz
    hg clone http://dev.automforge.net/CanFestival-3
    
    cd ~/Beremiz/CanFestival-3
    ./configure --can=virtual
    make

Launch Beremiz::

    cd ~/Beremiz/beremiz
    python Beremiz.py