SVGHMI: More configuration parameters : network interface, TCP port, URL path and watchdog enabling.
/* File generated by Beremiz (PlugGenerate_C method of modbus Plugin instance) */
/*
* Copyright (c) 2016 Mario de Sousa (msousa@fe.up.pt)
*
* This file is part of the Modbus library for Beremiz and matiec.
*
* This Modbus library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
* General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this Modbus library. If not, see <http://www.gnu.org/licenses/>.
*
* This code is made available on the understanding that it will not be
* used in safety-critical situations without a full and competent review.
*/
#include "mb_addr.h"
#include "mb_tcp_private.h"
#include "mb_master_private.h"
#define DEF_REQ_SEND_RETRIES 0
#define MODBUS_PARAM_STRING_SIZE 64
// Used by the Modbus server node
#define MEM_AREA_SIZE 65536
typedef struct{
u16 ro_bits [MEM_AREA_SIZE];
u16 rw_bits [MEM_AREA_SIZE];
u16 ro_words[MEM_AREA_SIZE];
u16 rw_words[MEM_AREA_SIZE];
/* Two flags to count the number of Modbus requests (read and write) we have
* successfully received from any remote Modbus master.
* Two boolean flags that are set whenever we successfully process a
* Modbus request sent from a remote client.
* These flags will be mapped onto located variables
* so the user's IEC 61131-3 code can check whether we are being
* polled by a Modbus master.
* The counters will roll over to 0 upon reaching maximum value.
* The user will probably periodically reset the boolean flags to false,
* and use this as a communication timeout
* (when it remains false in two consecutive periods)
*
* u8 for BOOL variable/flag
* u32 for UDINT variable/counter
*/
u8 flag_write_req_flag;
u8 flag_read_req_flag;
u32 flag_write_req_counter;
u32 flag_read_req_counter;
} server_mem_t;
/*
* Beremiz has a program to run on the PLC (Beremiz_service.py)
* to handle downloading of compiled programs, start/stop of PLC, etc.
* (see runtime/PLCObject.py for start/stop, loading, ...)
*
* This service also includes a web server to access PLC state (start/stop)
* and to change some basic confiuration parameters.
* (see runtime/NevowServer.py for the web server)
*
* The web server allows for extensions, where additional configuration
* parameters may be changed on the running/downloaded PLC.
* Modbus plugin also comes with an extension to the web server, through
* which the basic Modbus plugin configuration parameters may be changed
*
* This means that most values in the server_node_t and client_node_t
* may be changed after the co,piled code (.so file) is loaded into
* memory, and before the code starts executing.
* Since the we will also want to change the host and port (TCP) and the
* serial device (RTU) at this time, it is best if we allocate memory for
* these strings that may be overwritten by the web server (i.e., do not use
* const strings) in the server_node_t and client_node_t structures.
*
* The following structure members
* - node_addr_t.addr.tcp.host
* - node_addr_t.addr.tcp.service (i.e. the port)
* - node_addr_t.addr.rtu.device
* are all char *, and do not allocate memory for the strings.
*
* We therefore include two generic char arrays, str1 and str2,
* that will store the above strings, and the C code will initiliaze
* the node_addre_t.addr string pointers to these strings.
* i.e., either addr.rtu.device will point to str1,
* or
* addr.tcp.host and addr.tcp.service
* will point to str1 and str2 respectively
*/
typedef struct{
const char *location;
const char *config_name;
char str1[MODBUS_PARAM_STRING_SIZE];
char str2[MODBUS_PARAM_STRING_SIZE];
u8 slave_id;
node_addr_t node_address;
int mb_nd; // modbus library node used for this server
int init_state; // store how far along the server's initialization has progressed
/* entries from this point forward are not statically initialized when the variable is declared */
/* they will be initialized by the code itself in the init() function */
pthread_t thread_id; // thread handling this server
server_mem_t mem_area;
} server_node_t;
// Used by the Modbus client node
typedef struct{
const char *location;
const char *config_name;
char str1[MODBUS_PARAM_STRING_SIZE];
char str2[MODBUS_PARAM_STRING_SIZE];
node_addr_t node_address;
int mb_nd; // modbus library node used for this client
int init_state; // store how far along the client's initialization has progressed
u64 comm_period;// period to use when periodically sending requests to remote server
int prev_error; // error code of the last printed error message (0 when no error)
pthread_t thread_id; // thread handling all communication for this client node
pthread_t timer_thread_id; // thread handling periodical timer for this client node
pthread_mutex_t mutex; // mutex to be used with the following condition variable
pthread_cond_t condv; // used to signal the client thread when to start new modbus transactions
int execute_req; /* used, in association with condition variable,
* to signal when to send the modbus request to the server
* Note that we cannot simply rely on the condition variable to signal
* when to activate the client thread, as the call to
* pthread_cond_wait() may return without having been signaled!
* From the manual:
* Spurious wakeups from the
* pthread_cond_timedwait() or pthread_cond_wait() functions may occur.
* Since the return from pthread_cond_timedwait() or pthread_cond_wait()
* does not imply anything about the value of this predicate, the predi-
* cate should be re-evaluated upon such return.
*/
int periodic_act; /* (boolen) flag will be set when the client node's thread was activated
* (by signaling the above condition variable) by the periodic timer.
* Note that this same thread may also be activated (condition variable is signaled)
* by other sources, such as when the user program requests that a specific
* client MB transation be executed (flag_exec_req in client_request_t)
*/
} client_node_t;
// Used by the Modbus client plugin
typedef enum {
req_input,
req_output,
no_request /* just for tests to quickly disable a request */
} iotype_t;
#define REQ_BUF_SIZE 2000
typedef struct{
const char *location;
int client_node_id;
u8 slave_id;
iotype_t req_type;
u8 mb_function;
u16 address;
u16 count;
int retries;
u8 mb_error_code; // modbus error code (if any) of last executed request
u8 tn_error_code; // transaction error code (if any) of last executed request
int prev_error; // error code of the last printed error message (0 when no error)
struct timespec resp_timeout;
u8 write_on_change; // boolean flag. If true => execute MB request when data to send changes
// buffer used to store located PLC variables
u16 plcv_buffer[REQ_BUF_SIZE];
// buffer used to store data coming from / going to server
u16 coms_buffer[REQ_BUF_SIZE];
pthread_mutex_t coms_buf_mutex; // mutex to access coms_buffer[]
/* boolean flag that will be mapped onto a (BOOL) located variable
* (u8 because IEC 61131-3 BOOL are mapped onto u8 in C code! )
* -> allow PLC program to request when to start the MB transaction
* -> will be reset once the MB transaction has completed
*/
u8 flag_exec_req;
/* flag that works in conjunction with flag_exec_req
* (does not really need to be u8 as it is not mapped onto a located variable. )
* -> used by internal logic to indicate that the client thread
* that will be executing the MB transaction
* requested by flag exec_req has already been activated.
* -> will be reset once the MB transaction has completed
*/
u8 flag_exec_started;
/* flag that will be mapped onto a (BYTE) located variable
* (u8 because the flag is a BYTE! )
* -> will store the result of the last executed MB transaction
* 1 -> error accessing IP network, or serial interface
* 2 -> reply received from server was an invalid frame
* 3 -> server did not reply before timeout expired
* 4 -> server returned a valid Modbus error frame
* -> will be reset (set to 0) once this MB transaction has completed sucesfully
*
* In other words, this variable is a copy of tn_error_code, reset after each request attempt completes.
* We map this copy (instead of tn_error_code) onto a located variable in case the user program decides
* to overwrite its value and mess up the plugin logic.
*/
u8 flag_tn_error_code;
/* flag that will be mapped onto a (BYTE) located variable
* (u8 because the flag is a BYTE! )
* -> if flag_tn_error_code is 4, this flag will store the MB error code returned by the MB server in a MB error frame
* -> will be reset (set to 0) once this MB transaction has completed succesfully
*
* In other words, this variable is a copy of mb_error_code, reset after each request attempt completes.
* We map this copy (instead of mb_error_code) onto a located variable in case the user program decides
* to overwrite its value and mess up the plugin logic.
*/
u8 flag_mb_error_code;
} client_request_t;
/* The total number of nodes, needed to support _all_ instances of the modbus plugin */
#define TOTAL_TCPNODE_COUNT %(total_tcpnode_count)s
#define TOTAL_RTUNODE_COUNT %(total_rtunode_count)s
#define TOTAL_ASCNODE_COUNT %(total_ascnode_count)s
/* Values for instance %(locstr)s of the modbus plugin */
#define MAX_NUMBER_OF_TCPCLIENTS %(max_remote_tcpclient)s
#define NUMBER_OF_TCPSERVER_NODES %(tcpserver_node_count)s
#define NUMBER_OF_TCPCLIENT_NODES %(tcpclient_node_count)s
#define NUMBER_OF_TCPCLIENT_REQTS %(tcpclient_reqs_count)s
#define NUMBER_OF_RTUSERVER_NODES %(rtuserver_node_count)s
#define NUMBER_OF_RTUCLIENT_NODES %(rtuclient_node_count)s
#define NUMBER_OF_RTUCLIENT_REQTS %(rtuclient_reqs_count)s
#define NUMBER_OF_ASCIISERVER_NODES %(ascserver_node_count)s
#define NUMBER_OF_ASCIICLIENT_NODES %(ascclient_node_count)s
#define NUMBER_OF_ASCIICLIENT_REQTS %(ascclient_reqs_count)s
#define NUMBER_OF_SERVER_NODES (NUMBER_OF_TCPSERVER_NODES + \
NUMBER_OF_RTUSERVER_NODES + \
NUMBER_OF_ASCIISERVER_NODES)
#define NUMBER_OF_CLIENT_NODES (NUMBER_OF_TCPCLIENT_NODES + \
NUMBER_OF_RTUCLIENT_NODES + \
NUMBER_OF_ASCIICLIENT_NODES)
#define NUMBER_OF_CLIENT_REQTS (NUMBER_OF_TCPCLIENT_REQTS + \
NUMBER_OF_RTUCLIENT_REQTS + \
NUMBER_OF_ASCIICLIENT_REQTS)
/*initialization following all parameters given by user in application*/
static client_node_t client_nodes[NUMBER_OF_CLIENT_NODES] = {
%(client_nodes_params)s
};
static client_request_t client_requests[NUMBER_OF_CLIENT_REQTS] = {
%(client_req_params)s
};
static server_node_t server_nodes[NUMBER_OF_SERVER_NODES] = {
%(server_nodes_params)s
}
;
/*******************/
/*located variables*/
/*******************/
%(loc_vars)s