--- a/bacnet/BacnetSlaveEditor.py Fri Aug 10 17:45:33 2018 +0300
+++ b/bacnet/BacnetSlaveEditor.py Fri Aug 10 18:07:38 2018 +0300
@@ -23,329 +23,327 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+from __future__ import absolute_import
+from collections import Counter
+
import wx
-from collections import Counter
-from pickle import dump
+
+# Import some libraries on Beremiz code
from util.BitmapLibrary import GetBitmap
-
-
-
-# Import some libraries on Beremiz code...
-from controls.CustomGrid import CustomGrid
-from controls.CustomTable import CustomTable
+from controls.CustomGrid import CustomGrid
+from controls.CustomTable import CustomTable
from editors.ConfTreeNodeEditor import ConfTreeNodeEditor
-from graphics.GraphicCommons import ERROR_HIGHLIGHT
-
+from graphics.GraphicCommons import ERROR_HIGHLIGHT
# BACnet Engineering units taken from: ASHRAE 135-2016, clause/chapter 21
-BACnetEngineeringUnits = [
- ('(Acceleration) meters-per-second-per-second (166)', 166 ),
- ('(Area) square-meters (0)', 0 ),
- ('(Area) square-centimeters (116)', 116 ),
- ('(Area) square-feet (1)', 1 ),
- ('(Area) square-inches (115)', 115 ),
- ('(Currency) currency1 (105)', 105 ),
- ('(Currency) currency2 (106)', 106 ),
- ('(Currency) currency3 (107)', 107 ),
- ('(Currency) currency4 (108)', 108 ),
- ('(Currency) currency5 (109)', 109 ),
- ('(Currency) currency6 (110)', 110 ),
- ('(Currency) currency7 (111)', 111 ),
- ('(Currency) currency8 (112)', 112 ),
- ('(Currency) currency9 (113)', 113 ),
- ('(Currency) currency10 (114)', 114 ),
- ('(Electrical) milliamperes (2)', 2 ),
- ('(Electrical) amperes (3)', 3 ),
- ('(Electrical) amperes-per-meter (167)', 167 ),
- ('(Electrical) amperes-per-square-meter (168)', 168 ),
- ('(Electrical) ampere-square-meters (169)', 169 ),
- ('(Electrical) decibels (199)', 199 ),
- ('(Electrical) decibels-millivolt (200)', 200 ),
- ('(Electrical) decibels-volt (201)', 201 ),
- ('(Electrical) farads (170)', 170 ),
- ('(Electrical) henrys (171)', 171 ),
- ('(Electrical) ohms (4)', 4 ),
- ('(Electrical) ohm-meter-squared-per-meter (237)', 237 ),
- ('(Electrical) ohm-meters (172)', 172 ),
- ('(Electrical) milliohms (145)', 145 ),
- ('(Electrical) kilohms (122)', 122 ),
- ('(Electrical) megohms (123)', 123 ),
- ('(Electrical) microsiemens (190)', 190 ),
- ('(Electrical) millisiemens (202)', 202 ),
- ('(Electrical) siemens (173)', 173 ),
- ('(Electrical) siemens-per-meter (174)', 174 ),
- ('(Electrical) teslas (175)', 175 ),
- ('(Electrical) volts (5)', 5 ),
- ('(Electrical) millivolts (124)', 124 ),
- ('(Electrical) kilovolts (6)', 6 ),
- ('(Electrical) megavolts (7)', 7 ),
- ('(Electrical) volt-amperes (8)', 8 ),
- ('(Electrical) kilovolt-amperes (9)', 9 ),
- ('(Electrical) megavolt-amperes (10)', 10 ),
- ('(Electrical) volt-amperes-reactive (11)', 11 ),
- ('(Electrical) kilovolt-amperes-reactive (12)', 12 ),
- ('(Electrical) megavolt-amperes-reactive (13)', 13 ),
- ('(Electrical) volts-per-degree-kelvin (176)', 176 ),
- ('(Electrical) volts-per-meter (177)', 177 ),
- ('(Electrical) degrees-phase (14)', 14 ),
- ('(Electrical) power-factor (15)', 15 ),
- ('(Electrical) webers (178)', 178 ),
- ('(Energy) ampere-seconds (238)', 238 ),
- ('(Energy) volt-ampere-hours (239)', 239 ),
- ('(Energy) kilovolt-ampere-hours (240)', 240 ),
- ('(Energy) megavolt-ampere-hours (241)', 241 ),
- ('(Energy) volt-ampere-hours-reactive (242)', 242 ),
- ('(Energy) kilovolt-ampere-hours-reactive (243)', 243 ),
- ('(Energy) megavolt-ampere-hours-reactive (244)', 244 ),
- ('(Energy) volt-square-hours (245)', 245 ),
- ('(Energy) ampere-square-hours (246)', 246 ),
- ('(Energy) joules (16)', 16 ),
- ('(Energy) kilojoules (17)', 17 ),
- ('(Energy) kilojoules-per-kilogram (125)', 125 ),
- ('(Energy) megajoules (126)', 126 ),
- ('(Energy) watt-hours (18)', 18 ),
- ('(Energy) kilowatt-hours (19)', 19 ),
- ('(Energy) megawatt-hours (146)', 146 ),
- ('(Energy) watt-hours-reactive (203)', 203 ),
- ('(Energy) kilowatt-hours-reactive (204)', 204 ),
- ('(Energy) megawatt-hours-reactive (205)', 205 ),
- ('(Energy) btus (20)', 20 ),
- ('(Energy) kilo-btus (147)', 147 ),
- ('(Energy) mega-btus (148)', 148 ),
- ('(Energy) therms (21)', 21 ),
- ('(Energy) ton-hours (22)', 22 ),
- ('(Enthalpy) joules-per-kilogram-dry-air (23)', 23 ),
- ('(Enthalpy) kilojoules-per-kilogram-dry-air (149)', 149 ),
- ('(Enthalpy) megajoules-per-kilogram-dry-air (150)', 150 ),
- ('(Enthalpy) btus-per-pound-dry-air (24)', 24 ),
- ('(Enthalpy) btus-per-pound (117)', 117 ),
- ('(Entropy) joules-per-degree-kelvin (127)', 127 ),
- ('(Entropy) kilojoules-per-degree-kelvin (151)', 151 ),
- ('(Entropy) megajoules-per-degree-kelvin (152)', 152 ),
- ('(Entropy) joules-per-kilogram-degree-kelvin (128)', 128 ),
- ('(Force) newton (153)', 153 ),
- ('(Frequency) cycles-per-hour (25)', 25 ),
- ('(Frequency) cycles-per-minute (26)', 26 ),
- ('(Frequency) hertz (27)', 27 ),
- ('(Frequency) kilohertz (129)', 129 ),
- ('(Frequency) megahertz (130)', 130 ),
- ('(Frequency) per-hour (131)', 131 ),
- ('(Humidity) grams-of-water-per-kilogram-dry-air (28)', 28 ),
- ('(Humidity) percent-relative-humidity (29)', 29 ),
- ('(Length) micrometers (194)', 194 ),
- ('(Length) millimeters (30)', 30 ),
- ('(Length) centimeters (118)', 118 ),
- ('(Length) kilometers (193)', 193 ),
- ('(Length) meters (31)', 31 ),
- ('(Length) inches (32)', 32 ),
- ('(Length) feet (33)', 33 ),
- ('(Light) candelas (179)', 179 ),
- ('(Light) candelas-per-square-meter (180)', 180 ),
- ('(Light) watts-per-square-foot (34)', 34 ),
- ('(Light) watts-per-square-meter (35)', 35 ),
- ('(Light) lumens (36)', 36 ),
- ('(Light) luxes (37)', 37 ),
- ('(Light) foot-candles (38)', 38 ),
- ('(Mass) milligrams (196)', 196 ),
- ('(Mass) grams (195)', 195 ),
- ('(Mass) kilograms (39)', 39 ),
- ('(Mass) pounds-mass (40)', 40 ),
- ('(Mass) tons (41)', 41 ),
- ('(Mass Flow) grams-per-second (154)', 154 ),
- ('(Mass Flow) grams-per-minute (155)', 155 ),
- ('(Mass Flow) kilograms-per-second (42)', 42 ),
- ('(Mass Flow) kilograms-per-minute (43)', 43 ),
- ('(Mass Flow) kilograms-per-hour (44)', 44 ),
- ('(Mass Flow) pounds-mass-per-second (119)', 119 ),
- ('(Mass Flow) pounds-mass-per-minute (45)', 45 ),
- ('(Mass Flow) pounds-mass-per-hour (46)', 46 ),
- ('(Mass Flow) tons-per-hour (156)', 156 ),
- ('(Power) milliwatts (132)', 132 ),
- ('(Power) watts (47)', 47 ),
- ('(Power) kilowatts (48)', 48 ),
- ('(Power) megawatts (49)', 49 ),
- ('(Power) btus-per-hour (50)', 50 ),
- ('(Power) kilo-btus-per-hour (157)', 157 ),
- ('(Power) joule-per-hours (247)', 247 ),
- ('(Power) horsepower (51)', 51 ),
- ('(Power) tons-refrigeration (52)', 52 ),
- ('(Pressure) pascals (53)', 53 ),
- ('(Pressure) hectopascals (133)', 133 ),
- ('(Pressure) kilopascals (54)', 54 ),
- ('(Pressure) millibars (134)', 134 ),
- ('(Pressure) bars (55)', 55 ),
- ('(Pressure) pounds-force-per-square-inch (56)', 56 ),
- ('(Pressure) millimeters-of-water (206)', 206 ),
- ('(Pressure) centimeters-of-water (57)', 57 ),
- ('(Pressure) inches-of-water (58)', 58 ),
- ('(Pressure) millimeters-of-mercury (59)', 59 ),
- ('(Pressure) centimeters-of-mercury (60)', 60 ),
- ('(Pressure) inches-of-mercury (61)', 61 ),
- ('(Temperature) degrees-celsius (62)', 62 ),
- ('(Temperature) degrees-kelvin (63)', 63 ),
- ('(Temperature) degrees-kelvin-per-hour (181)', 181 ),
- ('(Temperature) degrees-kelvin-per-minute (182)', 182 ),
- ('(Temperature) degrees-fahrenheit (64)', 64 ),
- ('(Temperature) degree-days-celsius (65)', 65 ),
- ('(Temperature) degree-days-fahrenheit (66)', 66 ),
- ('(Temperature) delta-degrees-fahrenheit (120)', 120 ),
- ('(Temperature) delta-degrees-kelvin (121)', 121 ),
- ('(Time) years (67)', 67 ),
- ('(Time) months (68)', 68 ),
- ('(Time) weeks (69)', 69 ),
- ('(Time) days (70)', 70 ),
- ('(Time) hours (71)', 71 ),
- ('(Time) minutes (72)', 72 ),
- ('(Time) seconds (73)', 73 ),
- ('(Time) hundredths-seconds (158)', 158 ),
- ('(Time) milliseconds (159)', 159 ),
- ('(Torque) newton-meters (160)', 160 ),
- ('(Velocity) millimeters-per-second (161)', 161 ),
- ('(Velocity) millimeters-per-minute (162)', 162 ),
- ('(Velocity) meters-per-second (74)', 74 ),
- ('(Velocity) meters-per-minute (163)', 163 ),
- ('(Velocity) meters-per-hour (164)', 164 ),
- ('(Velocity) kilometers-per-hour (75)', 75 ),
- ('(Velocity) feet-per-second (76)', 76 ),
- ('(Velocity) feet-per-minute (77)', 77 ),
- ('(Velocity) miles-per-hour (78)', 78 ),
- ('(Volume) cubic-feet (79)', 79 ),
- ('(Volume) cubic-meters (80)', 80 ),
- ('(Volume) imperial-gallons (81)', 81 ),
- ('(Volume) milliliters (197)', 197 ),
- ('(Volume) liters (82)', 82 ),
- ('(Volume) us-gallons (83)', 83 ),
- ('(Volumetric Flow) cubic-feet-per-second (142)', 142 ),
- ('(Volumetric Flow) cubic-feet-per-minute (84)', 84 ),
- ('(Volumetric Flow) million-standard-cubic-feet-per-minute (254)', 254 ),
- ('(Volumetric Flow) cubic-feet-per-hour (191)', 191 ),
- ('(Volumetric Flow) cubic-feet-per-day (248)', 248 ),
- ('(Volumetric Flow) standard-cubic-feet-per-day (47808)', 47808 ),
- ('(Volumetric Flow) million-standard-cubic-feet-per-day (47809)', 47809 ),
- ('(Volumetric Flow) thousand-cubic-feet-per-day (47810)', 47810 ),
- ('(Volumetric Flow) thousand-standard-cubic-feet-per-day (47811)', 47811 ),
- ('(Volumetric Flow) pounds-mass-per-day (47812)', 47812 ),
- ('(Volumetric Flow) cubic-meters-per-second (85)', 85 ),
- ('(Volumetric Flow) cubic-meters-per-minute (165)', 165 ),
- ('(Volumetric Flow) cubic-meters-per-hour (135)', 135 ),
- ('(Volumetric Flow) cubic-meters-per-day (249)', 249 ),
- ('(Volumetric Flow) imperial-gallons-per-minute (86)', 86 ),
- ('(Volumetric Flow) milliliters-per-second (198)', 198 ),
- ('(Volumetric Flow) liters-per-second (87)', 87 ),
- ('(Volumetric Flow) liters-per-minute (88)', 88 ),
- ('(Volumetric Flow) liters-per-hour (136)', 136 ),
- ('(Volumetric Flow) us-gallons-per-minute (89)', 89 ),
- ('(Volumetric Flow) us-gallons-per-hour (192)', 192 ),
- ('(Other) degrees-angular (90)', 90 ),
- ('(Other) degrees-celsius-per-hour (91)', 91 ),
- ('(Other) degrees-celsius-per-minute (92)', 92 ),
- ('(Other) degrees-fahrenheit-per-hour (93)', 93 ),
- ('(Other) degrees-fahrenheit-per-minute (94)', 94 ),
- ('(Other) joule-seconds (183)', 183 ),
- ('(Other) kilograms-per-cubic-meter (186)', 186 ),
- ('(Other) kilowatt-hours-per-square-meter (137)', 137 ),
- ('(Other) kilowatt-hours-per-square-foot (138)', 138 ),
- ('(Other) watt-hours-per-cubic-meter (250)', 250 ),
- ('(Other) joules-per-cubic-meter (251)', 251 ),
- ('(Other) megajoules-per-square-meter (139)', 139 ),
- ('(Other) megajoules-per-square-foot (140)', 140 ),
- ('(Other) mole-percent (252)', 252 ),
- ('(Other) no-units (95)', 95 ),
- ('(Other) newton-seconds (187)', 187 ),
- ('(Other) newtons-per-meter (188)', 188 ),
- ('(Other) parts-per-million (96)', 96 ),
- ('(Other) parts-per-billion (97)', 97 ),
- ('(Other) pascal-seconds (253)', 253 ),
- ('(Other) percent (98)', 98 ),
- ('(Other) percent-obscuration-per-foot (143)', 143 ),
- ('(Other) percent-obscuration-per-meter (144)', 144 ),
- ('(Other) percent-per-second (99)', 99 ),
- ('(Other) per-minute (100)', 100 ),
- ('(Other) per-second (101)', 101 ),
- ('(Other) psi-per-degree-fahrenheit (102)', 102 ),
- ('(Other) radians (103)', 103 ),
- ('(Other) radians-per-second (184)', 184 ),
- ('(Other) revolutions-per-minute (104)', 104 ),
- ('(Other) square-meters-per-newton (185)', 185 ),
- ('(Other) watts-per-meter-per-degree-kelvin (189)', 189 ),
- ('(Other) watts-per-square-meter-degree-kelvin (141)', 141 ),
- ('(Other) per-mille (207)', 207 ),
- ('(Other) grams-per-gram (208)', 208 ),
- ('(Other) kilograms-per-kilogram (209)', 209 ),
- ('(Other) grams-per-kilogram (210)', 210 ),
- ('(Other) milligrams-per-gram (211)', 211 ),
- ('(Other) milligrams-per-kilogram (212)', 212 ),
- ('(Other) grams-per-milliliter (213)', 213 ),
- ('(Other) grams-per-liter (214)', 214 ),
- ('(Other) milligrams-per-liter (215)', 215 ),
- ('(Other) micrograms-per-liter (216)', 216 ),
- ('(Other) grams-per-cubic-meter (217)', 217 ),
- ('(Other) milligrams-per-cubic-meter (218)', 218 ),
- ('(Other) micrograms-per-cubic-meter (219)', 219 ),
- ('(Other) nanograms-per-cubic-meter (220)', 220 ),
- ('(Other) grams-per-cubic-centimeter (221)', 221 ),
- ('(Other) becquerels (222)', 222 ),
- ('(Other) kilobecquerels (223)', 223 ),
- ('(Other) megabecquerels (224)', 224 ),
- ('(Other) gray (225)', 225 ),
- ('(Other) milligray (226)', 226 ),
- ('(Other) microgray (227)', 227 ),
- ('(Other) sieverts (228)', 228 ),
- ('(Other) millisieverts (229)', 229 ),
- ('(Other) microsieverts (230)', 230 ),
- ('(Other) microsieverts-per-hour (231)', 231 ),
- ('(Other) millirems (47814)', 47814 ),
- ('(Other) millirems-per-hour (47815)', 47815 ),
- ('(Other) decibels-a (232)', 232 ),
- ('(Other) nephelometric-turbidity-unit (233)', 233 ),
- ('(Other) pH (234)', 234 ),
- ('(Other) grams-per-square-meter (235)', 235 ),
- ('(Other) minutes-per-degree-kelvin (236)', 236 )
- ] # BACnetEngineeringUnits
-
-
-
+BACnetEngineeringUnits = [
+ ('(Acceleration) meters-per-second-per-second (166)', 166),
+ ('(Area) square-meters (0)', 0),
+ ('(Area) square-centimeters (116)', 116),
+ ('(Area) square-feet (1)', 1),
+ ('(Area) square-inches (115)', 115),
+ ('(Currency) currency1 (105)', 105),
+ ('(Currency) currency2 (106)', 106),
+ ('(Currency) currency3 (107)', 107),
+ ('(Currency) currency4 (108)', 108),
+ ('(Currency) currency5 (109)', 109),
+ ('(Currency) currency6 (110)', 110),
+ ('(Currency) currency7 (111)', 111),
+ ('(Currency) currency8 (112)', 112),
+ ('(Currency) currency9 (113)', 113),
+ ('(Currency) currency10 (114)', 114),
+ ('(Electrical) milliamperes (2)', 2),
+ ('(Electrical) amperes (3)', 3),
+ ('(Electrical) amperes-per-meter (167)', 167),
+ ('(Electrical) amperes-per-square-meter (168)', 168),
+ ('(Electrical) ampere-square-meters (169)', 169),
+ ('(Electrical) decibels (199)', 199),
+ ('(Electrical) decibels-millivolt (200)', 200),
+ ('(Electrical) decibels-volt (201)', 201),
+ ('(Electrical) farads (170)', 170),
+ ('(Electrical) henrys (171)', 171),
+ ('(Electrical) ohms (4)', 4),
+ ('(Electrical) ohm-meter-squared-per-meter (237)', 237),
+ ('(Electrical) ohm-meters (172)', 172),
+ ('(Electrical) milliohms (145)', 145),
+ ('(Electrical) kilohms (122)', 122),
+ ('(Electrical) megohms (123)', 123),
+ ('(Electrical) microsiemens (190)', 190),
+ ('(Electrical) millisiemens (202)', 202),
+ ('(Electrical) siemens (173)', 173),
+ ('(Electrical) siemens-per-meter (174)', 174),
+ ('(Electrical) teslas (175)', 175),
+ ('(Electrical) volts (5)', 5),
+ ('(Electrical) millivolts (124)', 124),
+ ('(Electrical) kilovolts (6)', 6),
+ ('(Electrical) megavolts (7)', 7),
+ ('(Electrical) volt-amperes (8)', 8),
+ ('(Electrical) kilovolt-amperes (9)', 9),
+ ('(Electrical) megavolt-amperes (10)', 10),
+ ('(Electrical) volt-amperes-reactive (11)', 11),
+ ('(Electrical) kilovolt-amperes-reactive (12)', 12),
+ ('(Electrical) megavolt-amperes-reactive (13)', 13),
+ ('(Electrical) volts-per-degree-kelvin (176)', 176),
+ ('(Electrical) volts-per-meter (177)', 177),
+ ('(Electrical) degrees-phase (14)', 14),
+ ('(Electrical) power-factor (15)', 15),
+ ('(Electrical) webers (178)', 178),
+ ('(Energy) ampere-seconds (238)', 238),
+ ('(Energy) volt-ampere-hours (239)', 239),
+ ('(Energy) kilovolt-ampere-hours (240)', 240),
+ ('(Energy) megavolt-ampere-hours (241)', 241),
+ ('(Energy) volt-ampere-hours-reactive (242)', 242),
+ ('(Energy) kilovolt-ampere-hours-reactive (243)', 243),
+ ('(Energy) megavolt-ampere-hours-reactive (244)', 244),
+ ('(Energy) volt-square-hours (245)', 245),
+ ('(Energy) ampere-square-hours (246)', 246),
+ ('(Energy) joules (16)', 16),
+ ('(Energy) kilojoules (17)', 17),
+ ('(Energy) kilojoules-per-kilogram (125)', 125),
+ ('(Energy) megajoules (126)', 126),
+ ('(Energy) watt-hours (18)', 18),
+ ('(Energy) kilowatt-hours (19)', 19),
+ ('(Energy) megawatt-hours (146)', 146),
+ ('(Energy) watt-hours-reactive (203)', 203),
+ ('(Energy) kilowatt-hours-reactive (204)', 204),
+ ('(Energy) megawatt-hours-reactive (205)', 205),
+ ('(Energy) btus (20)', 20),
+ ('(Energy) kilo-btus (147)', 147),
+ ('(Energy) mega-btus (148)', 148),
+ ('(Energy) therms (21)', 21),
+ ('(Energy) ton-hours (22)', 22),
+ ('(Enthalpy) joules-per-kilogram-dry-air (23)', 23),
+ ('(Enthalpy) kilojoules-per-kilogram-dry-air (149)', 149),
+ ('(Enthalpy) megajoules-per-kilogram-dry-air (150)', 150),
+ ('(Enthalpy) btus-per-pound-dry-air (24)', 24),
+ ('(Enthalpy) btus-per-pound (117)', 117),
+ ('(Entropy) joules-per-degree-kelvin (127)', 127),
+ ('(Entropy) kilojoules-per-degree-kelvin (151)', 151),
+ ('(Entropy) megajoules-per-degree-kelvin (152)', 152),
+ ('(Entropy) joules-per-kilogram-degree-kelvin (128)', 128),
+ ('(Force) newton (153)', 153),
+ ('(Frequency) cycles-per-hour (25)', 25),
+ ('(Frequency) cycles-per-minute (26)', 26),
+ ('(Frequency) hertz (27)', 27),
+ ('(Frequency) kilohertz (129)', 129),
+ ('(Frequency) megahertz (130)', 130),
+ ('(Frequency) per-hour (131)', 131),
+ ('(Humidity) grams-of-water-per-kilogram-dry-air (28)', 28),
+ ('(Humidity) percent-relative-humidity (29)', 29),
+ ('(Length) micrometers (194)', 194),
+ ('(Length) millimeters (30)', 30),
+ ('(Length) centimeters (118)', 118),
+ ('(Length) kilometers (193)', 193),
+ ('(Length) meters (31)', 31),
+ ('(Length) inches (32)', 32),
+ ('(Length) feet (33)', 33),
+ ('(Light) candelas (179)', 179),
+ ('(Light) candelas-per-square-meter (180)', 180),
+ ('(Light) watts-per-square-foot (34)', 34),
+ ('(Light) watts-per-square-meter (35)', 35),
+ ('(Light) lumens (36)', 36),
+ ('(Light) luxes (37)', 37),
+ ('(Light) foot-candles (38)', 38),
+ ('(Mass) milligrams (196)', 196),
+ ('(Mass) grams (195)', 195),
+ ('(Mass) kilograms (39)', 39),
+ ('(Mass) pounds-mass (40)', 40),
+ ('(Mass) tons (41)', 41),
+ ('(Mass Flow) grams-per-second (154)', 154),
+ ('(Mass Flow) grams-per-minute (155)', 155),
+ ('(Mass Flow) kilograms-per-second (42)', 42),
+ ('(Mass Flow) kilograms-per-minute (43)', 43),
+ ('(Mass Flow) kilograms-per-hour (44)', 44),
+ ('(Mass Flow) pounds-mass-per-second (119)', 119),
+ ('(Mass Flow) pounds-mass-per-minute (45)', 45),
+ ('(Mass Flow) pounds-mass-per-hour (46)', 46),
+ ('(Mass Flow) tons-per-hour (156)', 156),
+ ('(Power) milliwatts (132)', 132),
+ ('(Power) watts (47)', 47),
+ ('(Power) kilowatts (48)', 48),
+ ('(Power) megawatts (49)', 49),
+ ('(Power) btus-per-hour (50)', 50),
+ ('(Power) kilo-btus-per-hour (157)', 157),
+ ('(Power) joule-per-hours (247)', 247),
+ ('(Power) horsepower (51)', 51),
+ ('(Power) tons-refrigeration (52)', 52),
+ ('(Pressure) pascals (53)', 53),
+ ('(Pressure) hectopascals (133)', 133),
+ ('(Pressure) kilopascals (54)', 54),
+ ('(Pressure) millibars (134)', 134),
+ ('(Pressure) bars (55)', 55),
+ ('(Pressure) pounds-force-per-square-inch (56)', 56),
+ ('(Pressure) millimeters-of-water (206)', 206),
+ ('(Pressure) centimeters-of-water (57)', 57),
+ ('(Pressure) inches-of-water (58)', 58),
+ ('(Pressure) millimeters-of-mercury (59)', 59),
+ ('(Pressure) centimeters-of-mercury (60)', 60),
+ ('(Pressure) inches-of-mercury (61)', 61),
+ ('(Temperature) degrees-celsius (62)', 62),
+ ('(Temperature) degrees-kelvin (63)', 63),
+ ('(Temperature) degrees-kelvin-per-hour (181)', 181),
+ ('(Temperature) degrees-kelvin-per-minute (182)', 182),
+ ('(Temperature) degrees-fahrenheit (64)', 64),
+ ('(Temperature) degree-days-celsius (65)', 65),
+ ('(Temperature) degree-days-fahrenheit (66)', 66),
+ ('(Temperature) delta-degrees-fahrenheit (120)', 120),
+ ('(Temperature) delta-degrees-kelvin (121)', 121),
+ ('(Time) years (67)', 67),
+ ('(Time) months (68)', 68),
+ ('(Time) weeks (69)', 69),
+ ('(Time) days (70)', 70),
+ ('(Time) hours (71)', 71),
+ ('(Time) minutes (72)', 72),
+ ('(Time) seconds (73)', 73),
+ ('(Time) hundredths-seconds (158)', 158),
+ ('(Time) milliseconds (159)', 159),
+ ('(Torque) newton-meters (160)', 160),
+ ('(Velocity) millimeters-per-second (161)', 161),
+ ('(Velocity) millimeters-per-minute (162)', 162),
+ ('(Velocity) meters-per-second (74)', 74),
+ ('(Velocity) meters-per-minute (163)', 163),
+ ('(Velocity) meters-per-hour (164)', 164),
+ ('(Velocity) kilometers-per-hour (75)', 75),
+ ('(Velocity) feet-per-second (76)', 76),
+ ('(Velocity) feet-per-minute (77)', 77),
+ ('(Velocity) miles-per-hour (78)', 78),
+ ('(Volume) cubic-feet (79)', 79),
+ ('(Volume) cubic-meters (80)', 80),
+ ('(Volume) imperial-gallons (81)', 81),
+ ('(Volume) milliliters (197)', 197),
+ ('(Volume) liters (82)', 82),
+ ('(Volume) us-gallons (83)', 83),
+ ('(Volumetric Flow) cubic-feet-per-second (142)', 142),
+ ('(Volumetric Flow) cubic-feet-per-minute (84)', 84),
+ ('(Volumetric Flow) million-standard-cubic-feet-per-minute (254)', 254),
+ ('(Volumetric Flow) cubic-feet-per-hour (191)', 191),
+ ('(Volumetric Flow) cubic-feet-per-day (248)', 248),
+ ('(Volumetric Flow) standard-cubic-feet-per-day (47808)', 47808),
+ ('(Volumetric Flow) million-standard-cubic-feet-per-day (47809)', 47809),
+ ('(Volumetric Flow) thousand-cubic-feet-per-day (47810)', 47810),
+ ('(Volumetric Flow) thousand-standard-cubic-feet-per-day (47811)', 47811),
+ ('(Volumetric Flow) pounds-mass-per-day (47812)', 47812),
+ ('(Volumetric Flow) cubic-meters-per-second (85)', 85),
+ ('(Volumetric Flow) cubic-meters-per-minute (165)', 165),
+ ('(Volumetric Flow) cubic-meters-per-hour (135)', 135),
+ ('(Volumetric Flow) cubic-meters-per-day (249)', 249),
+ ('(Volumetric Flow) imperial-gallons-per-minute (86)', 86),
+ ('(Volumetric Flow) milliliters-per-second (198)', 198),
+ ('(Volumetric Flow) liters-per-second (87)', 87),
+ ('(Volumetric Flow) liters-per-minute (88)', 88),
+ ('(Volumetric Flow) liters-per-hour (136)', 136),
+ ('(Volumetric Flow) us-gallons-per-minute (89)', 89),
+ ('(Volumetric Flow) us-gallons-per-hour (192)', 192),
+ ('(Other) degrees-angular (90)', 90),
+ ('(Other) degrees-celsius-per-hour (91)', 91),
+ ('(Other) degrees-celsius-per-minute (92)', 92),
+ ('(Other) degrees-fahrenheit-per-hour (93)', 93),
+ ('(Other) degrees-fahrenheit-per-minute (94)', 94),
+ ('(Other) joule-seconds (183)', 183),
+ ('(Other) kilograms-per-cubic-meter (186)', 186),
+ ('(Other) kilowatt-hours-per-square-meter (137)', 137),
+ ('(Other) kilowatt-hours-per-square-foot (138)', 138),
+ ('(Other) watt-hours-per-cubic-meter (250)', 250),
+ ('(Other) joules-per-cubic-meter (251)', 251),
+ ('(Other) megajoules-per-square-meter (139)', 139),
+ ('(Other) megajoules-per-square-foot (140)', 140),
+ ('(Other) mole-percent (252)', 252),
+ ('(Other) no-units (95)', 95),
+ ('(Other) newton-seconds (187)', 187),
+ ('(Other) newtons-per-meter (188)', 188),
+ ('(Other) parts-per-million (96)', 96),
+ ('(Other) parts-per-billion (97)', 97),
+ ('(Other) pascal-seconds (253)', 253),
+ ('(Other) percent (98)', 98),
+ ('(Other) percent-obscuration-per-foot (143)', 143),
+ ('(Other) percent-obscuration-per-meter (144)', 144),
+ ('(Other) percent-per-second (99)', 99),
+ ('(Other) per-minute (100)', 100),
+ ('(Other) per-second (101)', 101),
+ ('(Other) psi-per-degree-fahrenheit (102)', 102),
+ ('(Other) radians (103)', 103),
+ ('(Other) radians-per-second (184)', 184),
+ ('(Other) revolutions-per-minute (104)', 104),
+ ('(Other) square-meters-per-newton (185)', 185),
+ ('(Other) watts-per-meter-per-degree-kelvin (189)', 189),
+ ('(Other) watts-per-square-meter-degree-kelvin (141)', 141),
+ ('(Other) per-mille (207)', 207),
+ ('(Other) grams-per-gram (208)', 208),
+ ('(Other) kilograms-per-kilogram (209)', 209),
+ ('(Other) grams-per-kilogram (210)', 210),
+ ('(Other) milligrams-per-gram (211)', 211),
+ ('(Other) milligrams-per-kilogram (212)', 212),
+ ('(Other) grams-per-milliliter (213)', 213),
+ ('(Other) grams-per-liter (214)', 214),
+ ('(Other) milligrams-per-liter (215)', 215),
+ ('(Other) micrograms-per-liter (216)', 216),
+ ('(Other) grams-per-cubic-meter (217)', 217),
+ ('(Other) milligrams-per-cubic-meter (218)', 218),
+ ('(Other) micrograms-per-cubic-meter (219)', 219),
+ ('(Other) nanograms-per-cubic-meter (220)', 220),
+ ('(Other) grams-per-cubic-centimeter (221)', 221),
+ ('(Other) becquerels (222)', 222),
+ ('(Other) kilobecquerels (223)', 223),
+ ('(Other) megabecquerels (224)', 224),
+ ('(Other) gray (225)', 225),
+ ('(Other) milligray (226)', 226),
+ ('(Other) microgray (227)', 227),
+ ('(Other) sieverts (228)', 228),
+ ('(Other) millisieverts (229)', 229),
+ ('(Other) microsieverts (230)', 230),
+ ('(Other) microsieverts-per-hour (231)', 231),
+ ('(Other) millirems (47814)', 47814),
+ ('(Other) millirems-per-hour (47815)', 47815),
+ ('(Other) decibels-a (232)', 232),
+ ('(Other) nephelometric-turbidity-unit (233)', 233),
+ ('(Other) pH (234)', 234),
+ ('(Other) grams-per-square-meter (235)', 235),
+ ('(Other) minutes-per-degree-kelvin (236)', 236)
+] # BACnetEngineeringUnits
+
+
# ObjectID (22 bits ID + 10 bits type) => max = 2^22-1 = 4194303
# However, ObjectID 4194303 is not allowed!
-# 4194303 is used as a special value when object Id reference is referencing an undefined object
+# 4194303 is used as a special value when object Id reference is referencing an undefined object
# (similar to NULL in C)
BACnetObjectID_MAX = 4194302
BACnetObjectID_NUL = 4194303
-
# A base class
# what would be a purely virtual class in C++
-class ObjectProperties:
+class ObjectProperties(object):
# this __init_() function is currently not beeing used!
+
def __init__(self):
- #nothing to do
+ # nothing to do
return
class BinaryObject(ObjectProperties):
- # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
- # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
- # Be sure to use these exact names for these BACnet object properties!
- PropertyNames = ["Object Identifier", "Object Name", "Description"]
- ColumnAlignments = [ wx.ALIGN_RIGHT , wx.ALIGN_LEFT, wx.ALIGN_LEFT]
- ColumnSizes = [ 40 , 80 , 80 ]
- PropertyConfig = {"Object Identifier": {"GridCellEditor" : wx.grid.GridCellNumberEditor,
- "GridCellRenderer" : wx.grid.GridCellNumberRenderer,
- "GridCellEditorParam": "0,4194302"
- # syntax for GridCellNumberEditor -> "min,max"
- # ObjectID (22 bits ID + 10 bits type) => max = 2^22-1
- },
- "Object Name" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer": wx.grid.GridCellStringRenderer},
- "Description" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer": wx.grid.GridCellStringRenderer}
- }
-
+ # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
+ # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
+ # Be sure to use these exact names for these BACnet object properties!
+ PropertyNames = ["Object Identifier", "Object Name", "Description"]
+ ColumnAlignments = [wx.ALIGN_RIGHT, wx.ALIGN_LEFT, wx.ALIGN_LEFT]
+ ColumnSizes = [40, 80, 80]
+ PropertyConfig = {
+ "Object Identifier": {"GridCellEditor": wx.grid.GridCellNumberEditor,
+ "GridCellRenderer": wx.grid.GridCellNumberRenderer,
+ # syntax for GridCellNumberEditor -> "min,max"
+ # ObjectID (22 bits ID + 10 bits type) => max = 2^22-1
+ "GridCellEditorParam": "0,4194302"},
+ "Object Name": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer},
+ "Description": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer}
+ }
+
+
class AnalogObject(ObjectProperties):
- # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
- # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
+ # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
+ # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
# Be sure to use these exact names for these BACnet object properties!
#
# NOTE: Although it is not listed here (so it does not show up in the GUI, this object will also
@@ -353,200 +351,194 @@
# will store the ID corresponding to the "Engineering Units" currently chosen.
# This virtual property is kept synchronised to the "Engineering Units" property
# by the function PropertyChanged() which should be called by the OnCellChange event handler.
- PropertyNames = ["Object Identifier", "Object Name", "Description", "Engineering Units"] #'Unit ID'
- ColumnAlignments = [ wx.ALIGN_RIGHT , wx.ALIGN_LEFT, wx.ALIGN_LEFT, wx.ALIGN_LEFT ]
- ColumnSizes = [ 40 , 80 , 80 , 200 ]
- PropertyConfig = {"Object Identifier": {"GridCellEditor" : wx.grid.GridCellNumberEditor,
- "GridCellRenderer" : wx.grid.GridCellNumberRenderer,
- "GridCellEditorParam": "0,4194302"
- # syntax for GridCellNumberEditor -> "min,max"
- # ObjectID (22 bits ID + 10 bits type) => max = 2^22-1
- },
- "Object Name" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer" : wx.grid.GridCellStringRenderer},
- "Description" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer" : wx.grid.GridCellStringRenderer},
- "Engineering Units": {"GridCellEditor" : wx.grid.GridCellChoiceEditor,
- "GridCellRenderer" : wx.grid.GridCellStringRenderer,
- # use string renderer with choice editor!
- "GridCellEditorParam": ','.join([x[0] for x in BACnetEngineeringUnits])
- # syntax for GridCellChoiceEditor -> comma separated values
- }
- }
-
- # obj_properties should be a dictionary, with keys "Object Identifier", "Object Name", "Description", ...
+ PropertyNames = ["Object Identifier", "Object Name",
+ "Description", "Engineering Units"] # 'Unit ID'
+ ColumnAlignments = [
+ wx.ALIGN_RIGHT, wx.ALIGN_LEFT, wx.ALIGN_LEFT, wx.ALIGN_LEFT]
+ ColumnSizes = [40, 80, 80, 200]
+ PropertyConfig = {
+ "Object Identifier": {"GridCellEditor": wx.grid.GridCellNumberEditor,
+ "GridCellRenderer": wx.grid.GridCellNumberRenderer,
+ "GridCellEditorParam": "0,4194302"},
+ "Object Name": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer},
+ "Description": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer},
+ "Engineering Units": {"GridCellEditor": wx.grid.GridCellChoiceEditor,
+ # use string renderer with choice editor!
+ "GridCellRenderer": wx.grid.GridCellStringRenderer,
+ # syntax for GridCellChoiceEditor -> comma separated values
+ "GridCellEditorParam": ','.join([x[0] for x in BACnetEngineeringUnits])}
+ }
+
+ # obj_properties should be a dictionary, with keys "Object Identifier",
+ # "Object Name", "Description", ...
def UpdateVirtualProperties(self, obj_properties):
- obj_properties["Unit ID"] = [x[1] for x in BACnetEngineeringUnits if x[0] == obj_properties["Engineering Units"]][0]
-
-
+ obj_properties["Unit ID"] = [x[1]
+ for x in BACnetEngineeringUnits if x[0] == obj_properties["Engineering Units"]][0]
+
class MultiSObject(ObjectProperties):
- # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
- # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
- # Be sure to use these exact names for these BACnet object properties!
- PropertyNames = ["Object Identifier", "Object Name", "Description", "Number of States"]
- ColumnAlignments = [ wx.ALIGN_RIGHT , wx.ALIGN_LEFT, wx.ALIGN_LEFT, wx.ALIGN_CENTER ]
- ColumnSizes = [ 40 , 80 , 80 , 120 ]
- PropertyConfig = {"Object Identifier": {"GridCellEditor" : wx.grid.GridCellNumberEditor,
- "GridCellRenderer" : wx.grid.GridCellNumberRenderer,
- "GridCellEditorParam": "0,4194302"
- # syntax for GridCellNumberEditor -> "min,max"
- # ObjectID (22 bits ID + 10 bits type) => max = 2^22-1
- },
- "Object Name" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer" : wx.grid.GridCellStringRenderer},
- "Description" : {"GridCellEditor" : wx.grid.GridCellTextEditor,
- "GridCellRenderer" : wx.grid.GridCellStringRenderer},
- "Number of States" : {"GridCellEditor" : wx.grid.GridCellNumberEditor,
- "GridCellRenderer" : wx.grid.GridCellNumberRenderer,
- "GridCellEditorParam": "1,255" # syntax for GridCellNumberEditor -> "min,max"
- # MultiState Values are encoded in unsigned integer
- # (in BACnet => uint8_t), and can not be 0.
- # See ASHRAE 135-2016, section 12.20.4
- }
- }
-
+ # 'PropertyNames' will be used as the header for each column of the Object Properties grid!
+ # Warning: The rest of the code depends on the existance of an "Object Identifier" and "Object Name"
+ # Be sure to use these exact names for these BACnet object properties!
+ PropertyNames = [
+ "Object Identifier", "Object Name", "Description", "Number of States"]
+ ColumnAlignments = [
+ wx.ALIGN_RIGHT, wx.ALIGN_LEFT, wx.ALIGN_LEFT, wx.ALIGN_CENTER]
+ ColumnSizes = [40, 80, 80, 120]
+ PropertyConfig = {
+ "Object Identifier": {"GridCellEditor": wx.grid.GridCellNumberEditor,
+ "GridCellRenderer": wx.grid.GridCellNumberRenderer,
+ "GridCellEditorParam": "0,4194302"},
+ "Object Name": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer},
+ "Description": {"GridCellEditor": wx.grid.GridCellTextEditor,
+ "GridCellRenderer": wx.grid.GridCellStringRenderer},
+ # MultiState Values are encoded in unsigned integer
+ # (in BACnet => uint8_t), and can not be 0.
+ # See ASHRAE 135-2016, section 12.20.4
+ "Number of States": {"GridCellEditor": wx.grid.GridCellNumberEditor,
+ "GridCellRenderer": wx.grid.GridCellNumberRenderer,
+ # syntax for GridCellNumberEditor -> "min,max"
+ "GridCellEditorParam": "1,255"}
+ }
# The default values to use for each BACnet object type
#
# Note that the 'internal plugin parameters' get stored in the data table, but
-# are not visible in the GUI. They are used to generate the
+# are not visible in the GUI. They are used to generate the
# EDE files as well as the C code
class BVObject(BinaryObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Binary Value",
- "Description" :"",
- # internal plugin parameters...
- "BACnetObjTypeID" :5,
- "Ctype" :"uint8_t",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Binary Value",
+ "Description": "",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 5,
+ "Ctype": "uint8_t",
+ "Settable": "Y"}
+
class BOObject(BinaryObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Binary Output",
- "Description" :"",
- # internal plugin parameters...
- "BACnetObjTypeID" :4,
- "Ctype" :"uint8_t",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Binary Output",
+ "Description": "",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 4,
+ "Ctype": "uint8_t",
+ "Settable": "Y"}
+
class BIObject(BinaryObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Binary Input",
- "Description" :"",
- # internal plugin parameters...
- "BACnetObjTypeID" :3,
- "Ctype" :"uint8_t",
- "Settable" :"N"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Binary Input",
+ "Description": "",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 3,
+ "Ctype": "uint8_t",
+ "Settable": "N"}
+
class AVObject(AnalogObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Analog Value",
- "Description" :"",
- "Engineering Units":'(Other) no-units (95)',
- # internal plugin parameters...
- "Unit ID" :95, # the ID of the engineering unit
- # will get updated by UpdateVirtualProperties()
- "BACnetObjTypeID" :2,
- "Ctype" :"float",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Analog Value",
+ "Description": "",
+ "Engineering Units": '(Other) no-units (95)',
+ # internal plugin parameters...
+ "Unit ID": 95, # the ID of the engineering unit
+ # will get updated by
+ # UpdateVirtualProperties()
+ "BACnetObjTypeID": 2,
+ "Ctype": "float",
+ "Settable": "Y"}
+
class AOObject(AnalogObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Analog Output",
- "Description" :"",
- "Engineering Units":'(Other) no-units (95)',
- # internal plugin parameters...
- "Unit ID" :95, # the ID of the engineering unit
- # will get updated by UpdateVirtualProperties()
- "BACnetObjTypeID" :1,
- "Ctype" :"float",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Analog Output",
+ "Description": "",
+ "Engineering Units": '(Other) no-units (95)',
+ # internal plugin parameters...
+ "Unit ID": 95, # the ID of the engineering unit
+ # will get updated by
+ # UpdateVirtualProperties()
+ "BACnetObjTypeID": 1,
+ "Ctype": "float",
+ "Settable": "Y"}
+
class AIObject(AnalogObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Analog Input",
- "Description" :"",
- "Engineering Units":'(Other) no-units (95)',
- # internal plugin parameters...
- "Unit ID" :95, # the ID of the engineering unit
- # will get updated by UpdateVirtualProperties()
- "BACnetObjTypeID" :0,
- "Ctype" :"float",
- "Settable" :"N"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Analog Input",
+ "Description": "",
+ "Engineering Units": '(Other) no-units (95)',
+ # internal plugin parameters...
+ "Unit ID": 95, # the ID of the engineering unit
+ # will get updated by
+ # UpdateVirtualProperties()
+ "BACnetObjTypeID": 0,
+ "Ctype": "float",
+ "Settable": "N"}
+
class MSVObject(MultiSObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Multi-state Value",
- "Description" :"",
- "Number of States" :"255",
- # internal plugin parameters...
- "BACnetObjTypeID" :19,
- "Ctype" :"uint8_t",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Multi-state Value",
+ "Description": "",
+ "Number of States": "255",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 19,
+ "Ctype": "uint8_t",
+ "Settable": "Y"}
+
class MSOObject(MultiSObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Multi-state Output",
- "Description" :"",
- "Number of States" :"255",
- # internal plugin parameters...
- "BACnetObjTypeID" :14,
- "Ctype" :"uint8_t",
- "Settable" :"Y"
- }
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Multi-state Output",
+ "Description": "",
+ "Number of States": "255",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 14,
+ "Ctype": "uint8_t",
+ "Settable": "Y"}
+
class MSIObject(MultiSObject):
- DefaultValues = {"Object Identifier":"",
- "Object Name" :"Multi-state Input",
- "Description" :"",
- "Number of States" :"255",
- # internal plugin parameters...
- "BACnetObjTypeID" :13,
- "Ctype" :"uint8_t",
- "Settable" :"N"
- }
-
-
-
-
-
-
-
-
+ DefaultValues = {"Object Identifier": "",
+ "Object Name": "Multi-state Input",
+ "Description": "",
+ "Number of States": "255",
+ # internal plugin parameters...
+ "BACnetObjTypeID": 13,
+ "Ctype": "uint8_t",
+ "Settable": "N"}
class ObjectTable(CustomTable):
# A custom wx.grid.PyGridTableBase using user supplied data
- #
- # This will basically store a list of BACnet objects that the slave will support/implement.
- # There will be one instance of this ObjectTable class for each BACnet object type
+ #
+ # This will basically store a list of BACnet objects that the slave will support/implement.
+ # There will be one instance of this ObjectTable class for each BACnet object type
# (e.g. Binary Value, Analog Input, Multi State Output, ...)
- #
+ #
# The list of BACnet objects will actually be stored within the self.data variable
# (declared in CustomTable). Self.data will be a list of dictionaries (one entry per BACnet
# object). All of these dictionaries in the self.data list will have entries whose keys actually
- # depend on the BACnet type object being handled. The keys in the dictionary will be
+ # depend on the BACnet type object being handled. The keys in the dictionary will be
# the entries in the PropertyNames list of one of the following classes:
# (BVObject, BOObject, BIObject, AVObject, AOObject, AIObject, MSVObject, MSOObject, MSIObject).
#
- # For example, when handling Binary Value BACnet objects,
+ # For example, when handling Binary Value BACnet objects,
# self.data will be a list of dictionaries (one entry per row)
# self.data[n] will be a dictionary, with keys "Object Identifier", "Object Name", "Description"
- # for example: self.data[n] = {"Object Identifier":33, "Object Name":"room1", "Description":"xx"}
- #
+ # for example: self.data[n] = {"Object Identifier":33, "Object Name":"room1", "Description":"xx"}
+ #
# Note that this ObjectTable class merely stores the configuration data.
- # It does not control the display nor the editing of this data.
+ # It does not control the display nor the editing of this data.
# This data is typically displayed within a grid, that is controlled by the ObjectGrid class.
#
+
def __init__(self, parent, data, BACnetObjectType):
# parent : the _BacnetSlavePlug object that is instantiating this ObjectTable
# data : a list with the data to be shown on the grid
@@ -560,35 +552,37 @@
# (in particular, the UpdateVirtualProperties() method)
#
# The base class must be initialized *first*
- CustomTable.__init__(self, parent, data, BACnetObjectType.PropertyNames)
+ CustomTable.__init__(
+ self, parent, data, BACnetObjectType.PropertyNames)
self.BACnetObjectType = BACnetObjectType()
- self.ChangesToSave = False
-
- #def _GetRowEdit(self, row):
- #row_edit = self.GetValueByName(row, "Edit")
- #var_type = self.Parent.GetTagName()
- #bodytype = self.Parent.Controler.GetEditedElementBodyType(var_type)
- #if bodytype in ["ST", "IL"]:
- #row_edit = True;
- #return row_edit
+ self.ChangesToSave = False
+
+ # def _GetRowEdit(self, row):
+ # row_edit = self.GetValueByName(row, "Edit")
+ # var_type = self.Parent.GetTagName()
+ # bodytype = self.Parent.Controler.GetEditedElementBodyType(var_type)
+ # if bodytype in ["ST", "IL"]:
+ # row_edit = True;
+ # return row_edit
def _updateColAttrs(self, grid):
# wx.grid.Grid -> update the column attributes to add the
# appropriate renderer given the column name.
- #
+ #
# Otherwise default to the default renderer.
- #print "ObjectTable._updateColAttrs() called!!!"
+ # print "ObjectTable._updateColAttrs() called!!!"
for row in range(self.GetNumberRows()):
for col in range(self.GetNumberCols()):
- PropertyName = self.BACnetObjectType.PropertyNames[col]
+ PropertyName = self.BACnetObjectType.PropertyNames[col]
PropertyConfig = self.BACnetObjectType.PropertyConfig[PropertyName]
- grid.SetReadOnly (row, col, False)
- grid.SetCellEditor (row, col, PropertyConfig["GridCellEditor"] ())
- grid.SetCellRenderer (row, col, PropertyConfig["GridCellRenderer"]())
+ grid.SetReadOnly(row, col, False)
+ grid.SetCellEditor(row, col, PropertyConfig["GridCellEditor"]())
+ grid.SetCellRenderer(row, col, PropertyConfig["GridCellRenderer"]())
grid.SetCellBackgroundColour(row, col, wx.WHITE)
- grid.SetCellTextColour (row, col, wx.BLACK)
+ grid.SetCellTextColour(row, col, wx.BLACK)
if "GridCellEditorParam" in PropertyConfig:
- grid.GetCellEditor(row, col).SetParameters(PropertyConfig["GridCellEditorParam"])
+ grid.GetCellEditor(row, col).SetParameters(
+ PropertyConfig["GridCellEditorParam"])
self.ResizeRow(grid, row)
def FindValueByName(self, PropertyName, PropertyValue):
@@ -600,8 +594,8 @@
if int(self.GetValueByName(row, PropertyName)) == PropertyValue:
return row
return None
-
- # Return a list containing all the values under the column named 'colname'
+
+ # Return a list containing all the values under the column named 'colname'
def GetAllValuesByName(self, colname):
values = []
for row in range(self.GetNumberRows()):
@@ -610,13 +604,15 @@
# Returns a dictionary with:
# keys: IDs of BACnet objects
- # value: number of BACnet objects using this same Id
+ # value: number of BACnet objects using this same Id
# (values larger than 1 indicates an error as BACnet requires unique
# object IDs for objects of the same type)
def GetObjectIDCount(self):
- # The dictionary is built by first creating a list containing the IDs of all BACnet objects
+ # The dictionary is built by first creating a list containing the IDs
+ # of all BACnet objects
ObjectIDs = self.GetAllValuesByName("Object Identifier")
- ObjectIDs_as_int = [int(x) for x in ObjectIDs] # list of integers instead of strings...
+ # list of integers instead of strings...
+ ObjectIDs_as_int = [int(x) for x in ObjectIDs]
# This list is then transformed into a collections.Counter class
# Which is then transformed into a dictionary using dict()
return dict(Counter(ObjectIDs_as_int))
@@ -639,11 +635,10 @@
self.BACnetObjectType.UpdateVirtualProperties(ObjProp)
-
class ObjectGrid(CustomGrid):
# A custom wx.grid.Grid (CustomGrid derives from wx.grid.Grid)
- #
- # Needed mostly to customise the initial values of newly added rows, and to
+ #
+ # Needed mostly to customise the initial values of newly added rows, and to
# validate if the inserted data follows BACnet rules.
#
#
@@ -656,82 +651,87 @@
# The grid uses one line/row per BACnet object, and one column for each property of the BACnet
# object. The column titles change depending on the specific type of BACnet object being edited
# (BVObject, BOObject, BIObject, AVObject, AOObject, AIObject, MSVObject, MSOObject, MSIObject).
- # The editor to use for each column is also obtained from that class (e.g. TextEditor,
+ # The editor to use for each column is also obtained from that class (e.g. TextEditor,
# NumberEditor, ...)
#
# This class does NOT store the data in the grid. It merely controls its display and editing.
# The data in the grid is stored within an object of class ObjectTable
#
+
def __init__(self, *args, **kwargs):
CustomGrid.__init__(self, *args, **kwargs)
# Called when a new row is added by clicking Add button
- # call graph: CustomGrid.OnAddButton() --> CustomGrid.AddRow() --> ObjectGrid._AddRow()
+ # call graph: CustomGrid.OnAddButton() --> CustomGrid.AddRow() -->
+ # ObjectGrid._AddRow()
def _AddRow(self, new_row):
if new_row > 0:
self.Table.InsertRow(new_row, self.Table.GetRow(new_row - 1).copy())
else:
self.Table.InsertRow(new_row, self.DefaultValue.copy())
- self.Table.SetValueByName(new_row, "Object Identifier", BACnetObjectID_NUL) # start off with invalid object ID
+ # start off with invalid object ID
+ self.Table.SetValueByName(new_row, "Object Identifier", BACnetObjectID_NUL)
# Find an apropriate BACnet object ID for the new object.
# We choose a first attempt (based on object ID of previous line + 1)
new_object_id = 0
if new_row > 0:
- new_object_id = int(self.Table.GetValueByName(new_row - 1, "Object Identifier"))
+ new_object_id = int(
+ self.Table.GetValueByName(new_row - 1, "Object Identifier"))
new_object_id += 1
- # Check whether the chosen object ID is not already in use.
+ # Check whether the chosen object ID is not already in use.
# If in use, add 1 to the attempted object ID and recheck...
while self.Table.FindValueByName("Object Identifier", new_object_id) is not None:
new_object_id += 1
- # if reached end of object IDs, cycle back to 0
+ # if reached end of object IDs, cycle back to 0
# (remember, we may have started at any inital object ID > 0, so it makes sense to cyclce back to 0)
- # warning: We risk entering an inifinite loop if all object IDs are already used.
+ # warning: We risk entering an inifinite loop if all object IDs are already used.
# The likelyhood of this happening is extremely low, (we would need 2^22 elements in the table!)
# so don't worry about it for now.
if new_object_id > BACnetObjectID_MAX:
new_object_id = 0
# Set the object ID of the new object to the apropriate value
# ... and append the ID to the default object name (so the name becomes unique)
- new_object_name = self.DefaultValue.get("Object Name") + " " + str(new_object_id)
- self.Table.SetValueByName(new_row, "Object Name" , new_object_name)
+ new_object_name = self.DefaultValue.get(
+ "Object Name") + " " + str(new_object_id)
+ self.Table.SetValueByName(
+ new_row, "Object Name", new_object_name)
self.Table.SetValueByName(new_row, "Object Identifier", new_object_id)
self.Table.ResetView(self)
return new_row
-
# Called when a object ID is changed
# call graph: ObjectEditor.OnVariablesGridCellChange() --> this method
# Will check whether there is a duplicate object ID, and highlight it if so.
def HighlightDuplicateObjectIDs(self):
if self.Table.GetNumberRows() < 2:
- # Less than 2 rows. No duplicates are possible!
+ # Less than 2 rows. No duplicates are possible!
return
IDsCount = self.Table.GetObjectIDCount()
# check ALL object IDs for duplicates...
for row in range(self.Table.GetNumberRows()):
obj_id1 = int(self.Table.GetValueByName(row, "Object Identifier"))
if IDsCount[obj_id1] > 1:
- # More than 1 BACnet object using this ID! Let us Highlight this row with errors...
+ # More than 1 BACnet object using this ID! Let us Highlight this row with errors...
# TODO: change the hardcoded column number '0' to a number obtained at runtime
# that is guaranteed to match the column titled "Object Identifier"
self.SetCellBackgroundColour(row, 0, ERROR_HIGHLIGHT[0])
- self.SetCellTextColour (row, 0, ERROR_HIGHLIGHT[1])
- else:
+ self.SetCellTextColour(row, 0, ERROR_HIGHLIGHT[1])
+ else:
self.SetCellBackgroundColour(row, 0, wx.WHITE)
- self.SetCellTextColour (row, 0, wx.BLACK)
- # Refresh the graphical display to take into account any changes we may have made
+ self.SetCellTextColour(row, 0, wx.BLACK)
+ # Refresh the graphical display to take into account any changes we may
+ # have made
self.ForceRefresh()
- return None
-
+ return None
# Called when the user changes the name of BACnet object (using the GUI grid)
- # call graph: ObjectEditor.OnVariablesGridCellChange() -->
+ # call graph: ObjectEditor.OnVariablesGridCellChange() -->
# --> BacnetSlaveEditorPlug.HighlightAllDuplicateObjectNames() -->
# --> ObjectEditor.HighlightDuplicateObjectNames() -->
# --> (this method)
# Will check whether there is a duplicate BACnet object name, and highlight it if so.
#
- # Since the names of BACnet objects must be unique within the whole bacnet server (and
+ # Since the names of BACnet objects must be unique within the whole bacnet server (and
# not just among the BACnet objects of the same class (e.g. Analog Value, Binary Input, ...)
# to work properly this method must be passed a list of the names of all BACnet objects
# currently configured.
@@ -743,18 +743,17 @@
# TODO: change the hardcoded column number '1' to a number obtained at runtime
# that is guaranteed to match the column titled "Object Name"
if AllObjectNamesFreq[self.Table.GetValueByName(row, "Object Name")] > 1:
- # This is an error! Highlight it...
+ # This is an error! Highlight it...
self.SetCellBackgroundColour(row, 1, ERROR_HIGHLIGHT[0])
- self.SetCellTextColour (row, 1, ERROR_HIGHLIGHT[1])
- else:
+ self.SetCellTextColour(row, 1, ERROR_HIGHLIGHT[1])
+ else:
self.SetCellBackgroundColour(row, 1, wx.WHITE)
- self.SetCellTextColour (row, 1, wx.BLACK)
- # Refresh the graphical display to take into account any changes we may have made
+ self.SetCellTextColour(row, 1, wx.BLACK)
+ # Refresh the graphical display to take into account any changes we may
+ # have made
self.ForceRefresh()
- return None
-
-
-
+ return None
+
class ObjectEditor(wx.Panel):
# This ObjectEditor class:
@@ -763,14 +762,15 @@
# This 'window' is currenty displayed within one tab of the bacnet plugin, but this
# may change in the future!
#
- # It includes a grid to display all the BACnet objects of its type , as well as the buttons
+ # It includes a grid to display all the BACnet objects of its type , as well as the buttons
# to insert, delete and move (up/down) a BACnet object in the grid.
# It also includes the sizers and spacers required to lay out the grid and buttons
# in the wndow.
#
+
def __init__(self, parent, window, controller, ObjTable):
# window: the window in which the editor will open.
- # controller: The ConfigTreeNode object that controlls the data presented by
+ # controller: The ConfigTreeNode object that controlls the data presented by
# this 'config tree node editor'
#
# parent: wx._controls.Notebook
@@ -778,57 +778,62 @@
# controller: controller will be an object of class
# FinalCTNClass (i.e. beremiz.ConfigTreeNode.FinalCTNClass )
# (FinalCTNClass inherits from: ConfigTreeNode and _BacnetSlavePlug)
- # (For the BACnet plugin, it is easier to think of controller as a _BacnetSlavePlug,
+ # (For the BACnet plugin, it is easier to think of controller as a _BacnetSlavePlug,
# as the other classes are generic to all plugins!!)
#
# ObjTable: The object of class ObjectTable that stores the data displayed in the grid.
# This object is instantiated and managed by the _BacnetSlavePlug class.
#
- self.window = window
- self.controller = controller
+ self.window = window
+ self.controller = controller
self.ObjTable = ObjTable
-
+
wx.Panel.__init__(self, parent)
-
+
# The main sizer, 2 rows: top row for buttons, bottom row for 2D grid
self.MainSizer = wx.FlexGridSizer(cols=1, hgap=10, rows=2, vgap=0)
self.MainSizer.AddGrowableCol(0)
self.MainSizer.AddGrowableRow(1)
- # sizer placed on top row of main sizer:
+ # sizer placed on top row of main sizer:
# 1 row; 6 columns: 1 static text, one stretchable spacer, 4 buttons
controls_sizer = wx.FlexGridSizer(cols=6, hgap=4, rows=1, vgap=5)
controls_sizer.AddGrowableCol(0)
controls_sizer.AddGrowableRow(0)
- self.MainSizer.Add(controls_sizer, border=5, flag=wx.GROW|wx.ALL)
+ self.MainSizer.Add(controls_sizer, border=5, flag=wx.GROW | wx.ALL)
# the buttons that populate the controls sizer (itself in top row of the main sizer)
# NOTE: the _("string") function will translate the "string" to the local language
- controls_sizer.Add(wx.StaticText(self, label=_('Object Properties:')), flag=wx.ALIGN_BOTTOM)
+ controls_sizer.Add(
+ wx.StaticText(self, label=_('Object Properties:')), flag=wx.ALIGN_BOTTOM)
controls_sizer.AddStretchSpacer()
for name, bitmap, help in [
- ("AddButton" , "add_element" , _("Add variable" )),
- ("DeleteButton", "remove_element", _("Remove variable" )),
- ("UpButton" , "up" , _("Move variable up" )),
- ("DownButton" , "down" , _("Move variable down"))]:
- button = wx.lib.buttons.GenBitmapButton(self, bitmap=GetBitmap(bitmap),
- size=wx.Size(28, 28),
- style=wx.NO_BORDER)
+ ("AddButton", "add_element", _("Add variable")),
+ ("DeleteButton", "remove_element", _("Remove variable")),
+ ("UpButton", "up", _("Move variable up")),
+ ("DownButton", "down", _("Move variable down"))]:
+ button = wx.lib.buttons.GenBitmapButton(
+ self, bitmap=GetBitmap(bitmap),
+ size=wx.Size(28, 28),
+ style=wx.NO_BORDER)
button.SetToolTipString(help)
setattr(self, name, button)
- controls_sizer.Add(button)
-
- # the variable grid that will populate the bottom row of the main sizer
+ controls_sizer.Add(button)
+
+ # the variable grid that will populate the bottom row of the main sizer
panel = self
self.VariablesGrid = ObjectGrid(panel, style=wx.VSCROLL)
- #self.VariablesGrid.SetDropTarget(VariableDropTarget(self)) # use only to enable drag'n'drop
- self.VariablesGrid.Bind(wx.grid.EVT_GRID_CELL_CHANGE, self.OnVariablesGridCellChange)
- #self.VariablesGrid.Bind(wx.grid.EVT_GRID_CELL_LEFT_CLICK, self.OnVariablesGridCellLeftClick)
- #self.VariablesGrid.Bind(wx.grid.EVT_GRID_EDITOR_SHOWN, self.OnVariablesGridEditorShown)
+ # use only to enable drag'n'drop
+ # self.VariablesGrid.SetDropTarget(VariableDropTarget(self))
+ self.VariablesGrid.Bind(
+ wx.grid.EVT_GRID_CELL_CHANGE, self.OnVariablesGridCellChange)
+ # self.VariablesGrid.Bind(wx.grid.EVT_GRID_CELL_LEFT_CLICK, self.OnVariablesGridCellLeftClick)
+ # self.VariablesGrid.Bind(wx.grid.EVT_GRID_EDITOR_SHOWN, self.OnVariablesGridEditorShown)
self.MainSizer.Add(self.VariablesGrid, flag=wx.GROW)
-
+
# Configure the Variables Grid...
- self.VariablesGrid.SetRowLabelSize(0) # do not include a leftmost column containing the 'row label'
+ # do not include a leftmost column containing the 'row label'
+ self.VariablesGrid.SetRowLabelSize(0)
self.VariablesGrid.SetButtons({"Add": self.AddButton,
"Delete": self.DeleteButton,
"Up": self.UpButton,
@@ -837,10 +842,11 @@
# NOTE: ObjTable.BACnetObjectType will contain the class name of one of the following classes
# (BVObject, BIObject, BOObject, AVObject, AIObject, AOObject, MSVObject, MSIObject, MSOObject)
# which inherit from one of (BinaryObject, AnalogObject, MultiSObject)
- self.VariablesGrid.SetDefaultValue(self.ObjTable.BACnetObjectType.DefaultValues)
+ self.VariablesGrid.SetDefaultValue(
+ self.ObjTable.BACnetObjectType.DefaultValues)
# self.ObjTable: The table that contains the data displayed in the grid
- # This table was instantiated/created in the initializer for class _BacnetSlavePlug
+ # This table was instantiated/created in the initializer for class _BacnetSlavePlug
self.VariablesGrid.SetTable(self.ObjTable)
self.VariablesGrid.SetEditable(True)
# set the column attributes (width, alignment)
@@ -848,19 +854,19 @@
# (BVObject, BIObject, BOObject, AVObject, AIObject, AOObject, MSVObject, MSIObject, MSOObject)
# which inherit from one of (BinaryObject, AnalogObject, MultiSObject)
ColumnAlignments = self.ObjTable.BACnetObjectType.ColumnAlignments
- ColumnSizes = self.ObjTable.BACnetObjectType.ColumnSizes
- for col in range( self.ObjTable.GetNumberCols()):
+ ColumnSizes = self.ObjTable.BACnetObjectType.ColumnSizes
+ for col in range(self.ObjTable.GetNumberCols()):
attr = wx.grid.GridCellAttr()
attr.SetAlignment(ColumnAlignments[col], wx.ALIGN_CENTRE)
self.VariablesGrid.SetColAttr(col, attr)
self.VariablesGrid.SetColMinimalWidth(col, ColumnSizes[col])
self.VariablesGrid.AutoSizeColumn(col, False)
-
+
# layout the items in all sizers, and show them too.
- self.SetSizer(self.MainSizer) # Have the wondow 'own' the sizer...
- #self.MainSizer.ShowItems(True) # not needed once the window 'owns' the sizer (SetSizer())
- #self.MainSizer.Layout() # not needed once the window 'owns' the sizer (SetSizer())
-
+ self.SetSizer(self.MainSizer) # Have the wondow 'own' the sizer...
+ # self.MainSizer.ShowItems(True) # not needed once the window 'owns' the sizer (SetSizer())
+ # self.MainSizer.Layout() # not needed once the window 'owns' the sizer (SetSizer())
+
# Refresh the view of the grid...
# We ask the table to do that, who in turn will configure the grid for us!!
# It will configure the CellRenderers and CellEditors taking into account the type of
@@ -872,62 +878,57 @@
# (in order to maintain GUI consistency), so we have to adopt their way of doing things.
#
# NOTE: ObjectTable.ResetView() (remember, ObjTable is of class ObjectTable)
- # calls ObjectTable._updateColAttrs(), who will do the configuring.
+ # calls ObjectTable._updateColAttrs(), who will do the configuring.
self.ObjTable.ResetView(self.VariablesGrid)
-
def RefreshView(self):
- #print "ObjectEditor.RefreshView() called!!!"
+ # print "ObjectEditor.RefreshView() called!!!"
# Check for Duplicate Object IDs is only done within same BACnet object type (ID is unique by type).
# The VariablesGrid class can handle it by itself.
self.VariablesGrid.HighlightDuplicateObjectIDs()
# Check for Duplicate Object Names must be done globally (Object Name is unique within bacnet server)
# Only the BacnetSlaveEditorPlug can and will handle this.
- #self.window.HighlightAllDuplicateObjectNames()
- pass
-
- #########################################
+ # self.window.HighlightAllDuplicateObjectNames()
+
+ #
# Event handlers for the Variables Grid #
- #########################################
+ #
def OnVariablesGridCellChange(self, event):
- row, col = event.GetRow(), event.GetCol()
- #print "ObjectEditor.OnVariablesGridCellChange(row=%s, col=%s) called!!!" % (row, col)
+ col = event.GetCol()
+ # print "ObjectEditor.OnVariablesGridCellChange(row=%s, col=%s)
+ # called!!!" % (row, col)
self.ObjTable.ChangesToSave = True
if self.ObjTable.GetColLabelValue(col) == "Object Identifier":
- # an Object ID was changed => must check duplicate object IDs.
+ # an Object ID was changed => must check duplicate object IDs.
self.VariablesGrid.HighlightDuplicateObjectIDs()
if self.ObjTable.GetColLabelValue(col) == "Object Name":
- # an Object Name was changed => must check duplicate object names.
+ # an Object Name was changed => must check duplicate object names.
# Note that this must be done to _all_ BACnet objects, and not just the objects
# of the same BACnet class (Binary Value, Analog Input, ...)
# So we have the BacnetSlaveEditorPlug class do it...
self.window.HighlightAllDuplicateObjectNames()
- # There are changes to save =>
- # udate the enabled/disabled state of the 'save' option in the 'file' menu
+ # There are changes to save =>
+ # udate the enabled/disabled state of the 'save' option in the 'file' menu
self.window.RefreshBeremizWindow()
event.Skip()
def OnVariablesGridCellLeftClick(self, event):
- row = event.GetRow()
+ pass
def OnVariablesGridEditorShown(self, event):
- row, col = event.GetRow(), event.GetCol()
+ pass
def HighlightDuplicateObjectNames(self, AllObjectNamesFreq):
return self.VariablesGrid.HighlightDuplicateObjectNames(AllObjectNamesFreq)
-
-
-
-
class BacnetSlaveEditorPlug(ConfTreeNodeEditor):
# inheritance tree
# wx.SplitterWindow-->EditorPanel-->ConfTreeNodeEditor-->BacnetSlaveEditorPlug
#
# self.Controller -> The object that controls the data displayed in this editor
# In our case, the object of class _BacnetSlavePlug
-
+
CONFNODEEDITOR_TABS = [
(_("Analog Value Objects"), "_create_AV_ObjectEditor"),
(_("Analog Output Objects"), "_create_AO_ObjectEditor"),
@@ -938,53 +939,62 @@
(_("Multi-State Value Objects"), "_create_MSV_ObjectEditor"),
(_("Multi-State Output Objects"), "_create_MSO_ObjectEditor"),
(_("Multi-State Input Objects"), "_create_MSI_ObjectEditor")]
-
+
def _create_AV_ObjectEditor(self, parent):
- self.AV_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["AV_Obj"])
+ self.AV_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["AV_Obj"])
return self.AV_ObjectEditor
-
+
def _create_AO_ObjectEditor(self, parent):
- self.AO_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["AO_Obj"])
+ self.AO_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["AO_Obj"])
return self.AO_ObjectEditor
-
+
def _create_AI_ObjectEditor(self, parent):
- self.AI_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["AI_Obj"])
+ self.AI_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["AI_Obj"])
return self.AI_ObjectEditor
-
+
def _create_BV_ObjectEditor(self, parent):
- self.BV_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["BV_Obj"])
+ self.BV_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["BV_Obj"])
return self.BV_ObjectEditor
-
+
def _create_BO_ObjectEditor(self, parent):
- self.BO_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["BO_Obj"])
+ self.BO_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["BO_Obj"])
return self.BO_ObjectEditor
-
+
def _create_BI_ObjectEditor(self, parent):
- self.BI_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["BI_Obj"])
+ self.BI_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["BI_Obj"])
return self.BI_ObjectEditor
-
+
def _create_MSV_ObjectEditor(self, parent):
- self.MSV_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["MSV_Obj"])
+ self.MSV_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["MSV_Obj"])
return self.MSV_ObjectEditor
-
+
def _create_MSO_ObjectEditor(self, parent):
- self.MSO_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["MSO_Obj"])
+ self.MSO_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["MSO_Obj"])
return self.MSO_ObjectEditor
-
+
def _create_MSI_ObjectEditor(self, parent):
- self.MSI_ObjectEditor = ObjectEditor(parent, self, self.Controler, self.Controler.ObjTables["MSI_Obj"])
+ self.MSI_ObjectEditor = ObjectEditor(
+ parent, self, self.Controler, self.Controler.ObjTables["MSI_Obj"])
return self.MSI_ObjectEditor
-
+
def __init__(self, parent, controler, window, editable=True):
self.Editable = editable
ConfTreeNodeEditor.__init__(self, parent, controler, window)
-
+
def __del__(self):
self.Controler.OnCloseEditor(self)
-
+
def GetConfNodeMenuItems(self):
return []
-
+
def RefreshConfNodeMenu(self, confnode_menu):
return
@@ -1013,17 +1023,21 @@
self.MSO_ObjectEditor.HighlightDuplicateObjectNames(ObjectNamesCount)
self.MSI_ObjectEditor.HighlightDuplicateObjectNames(ObjectNamesCount)
return None
-
-
+
def RefreshBeremizWindow(self):
- # self.ParentWindow is the top level Beremiz class (object) that
+ # self.ParentWindow is the top level Beremiz class (object) that
# handles the beremiz window and layout
- self.ParentWindow.RefreshTitle() # Refresh the title of the Beremiz window
- # (it changes depending on whether there are
- # changes to save!! )
- self.ParentWindow.RefreshFileMenu() # Refresh the enabled/disabled state of the
- # entries in the main 'file' menu.
- # ('Save' sub-menu should become enabled
- # if there are changes to save! )
- ###self.ParentWindow.RefreshEditMenu()
- ###self.ParentWindow.RefreshPageTitles()
+
+ # Refresh the title of the Beremiz window
+ # (it changes depending on whether there are
+ # changes to save!! )
+ self.ParentWindow.RefreshTitle()
+
+ # Refresh the enabled/disabled state of the
+ # entries in the main 'file' menu.
+ # ('Save' sub-menu should become enabled
+ # if there are changes to save! )
+ self.ParentWindow.RefreshFileMenu()
+
+ # self.ParentWindow.RefreshEditMenu()
+ # self.ParentWindow.RefreshPageTitles()