--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/bacnet/runtime/config_bacnet_for_beremiz.h Fri Jun 08 13:28:00 2018 +0200
@@ -0,0 +1,284 @@
+/**************************************************************************
+*
+* Copyright (C) 2004 Steve Karg <skarg@users.sourceforge.net>
+* Copyright (C) 2017 Mario de Sousa <msousa@fe.up.pt>
+*
+* Permission is hereby granted, free of charge, to any person obtaining
+* a copy of this software and associated documentation files (the
+* "Software"), to deal in the Software without restriction, including
+* without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to
+* permit persons to whom the Software is furnished to do so, subject to
+* the following conditions:
+*
+* The above copyright notice and this permission notice shall be included
+* in all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*
+*********************************************************************/
+
+
+#ifndef CONFIG_BACNET_FOR_BEREMIZ_H
+#define CONFIG_BACNET_FOR_BEREMIZ_H
+
+#ifdef CONFIG_H
+#error "config.h already processed! (config_bacnet_for_beremiz.h should be included before config.h)"
+#endif
+
+/* Compilaton options for BACnet library, configured for the BACnet sserver
+ * running on Beremiz.
+ */
+
+/* declare a single physical layer using your compiler define.
+ * see datalink.h for possible defines.
+ */
+/* Use BACnet/IP */
+#define BACDL_BIP
+
+/* optional configuration for BACnet/IP datalink layers */
+/* other BIP defines (define as 1 to enable):
+ USE_INADDR - uses INADDR_BROADCAST for broadcast and binds using INADDR_ANY
+ USE_CLASSADDR = uses IN_CLASSx_HOST where x=A,B,C or D for broadcast
+*/
+#define BBMD_ENABLED 1
+
+/* name of file in which BDT table will be stored */
+#define BBMD_BACKUP_FILE beremiz_BACnet_BDT_table
+
+/* Enable the Gateway (Routing) functionality here, if desired. */
+#define MAX_NUM_DEVICES 1 /* Just the one normal BACnet Device Object */
+
+
+/* Define your processor architecture as
+ Big Endian (PowerPC,68K,Sparc) or Little Endian (Intel,AVR)
+ ARM and MIPS can be either - what is your setup? */
+
+/* WARNING: The following files are being included:
+ * <stdib.h> --> <endian.h> --> <bits/endian.h>
+ *
+ * endian.h defines the following constants as:
+ * #define __LITTLE_ENDIAN and LITTLE_ENDIAN as 1234
+ * #define __BIG_ENDIAN and BIG_ENDIAN as 4321
+ * #define __PDP_ENDIAN and PDP_ENDIAN as 3412
+ *
+ * bits/endian.h defines the constant BYTE_ORDER as:
+ * #define __BYTE_ORDER as __LITTLE_ENDIAN
+ *
+ * endian.h then sets the following constants
+ * (if __USE_BSD is set, which seems to be true):
+ * # define LITTLE_ENDIAN __LITTLE_ENDIAN
+ * # define BIG_ENDIAN __BIG_ENDIAN
+ * # define PDP_ENDIAN __PDP_ENDIAN
+ * # define BYTE_ORDER __BYTE_ORDER
+ *
+ * CONCLUSION:
+ * The bacnet library uses the BIG_ENDIAN constant (set to 0, or anything <>0)
+ * to indicate whether we are compiling on a little or big endian platform.
+ * However, <stdlib.h> is defining this same constant as '4321' !!!
+ * The decision to use BIG_ENDIAN as the constant is a unfortunate
+ * on the part of the bacnet coders, but we live with it for now...
+ * We simply start off by undefining the BIG_ENDIAN constant, and carry
+ * on from there!
+ */
+#undef BIG_ENDIAN
+
+#ifndef BIG_ENDIAN
+#if defined(__GNUC__)
+ /* We have GCC, which should define __LITTLE_ENDIAN__ or __BIG_ENDIAN__ */
+# if defined(__LITTLE_ENDIAN__)
+/*# warning "Using gcc to determine platform endianness."*/
+# define BIG_ENDIAN 0
+# elif defined(__BIG_ENDIAN__)
+/*# warning "Using gcc to determine platform endianness."*/
+# define BIG_ENDIAN 1
+# endif
+#endif /* __GNUC__ */
+#endif /* BIG_ENDIAN */
+
+
+/* If we still don't know byte order, try to get it from <endian.h> */
+#ifndef BIG_ENDIAN
+#include <endian.h>
+# ifdef BYTE_ORDER
+# if BYTE_ORDER == LITTLE_ENDIAN
+/*# warning "Using <endian.h> to determine platform endianness."*/
+# undef BIG_ENDIAN
+# define BIG_ENDIAN 0
+# elif BYTE_ORDER == BIG_ENDIAN
+/*# warning "Using <endian.h> to determine platform endianness."*/
+# undef BIG_ENDIAN
+# define BIG_ENDIAN 1
+# else
+# undef BIG_ENDIAN
+# endif
+# endif /* BYTE_ORDER */
+#endif /* BIG_ENDIAN */
+
+
+#ifndef BIG_ENDIAN
+#error "Unable to determine platform's byte order. Aborting compilation."
+#elif BIG_ENDIAN
+/*#warning "Compiling for BIG endian platform."*/
+#else
+/*#warning "Compiling for LITTLE endian platform."*/
+#endif
+
+
+
+/* Define your Vendor Identifier assigned by ASHRAE */
+#define BACNET_VENDOR_ID %(BACnet_Vendor_ID)s
+#define BACNET_VENDOR_NAME "%(BACnet_Vendor_Name)s"
+#define BACNET_DEVICE_MODEL_NAME "%(BACnet_Model_Name)s"
+#define BACNET_FIRMWARE_REVISION "Beremiz BACnet Extension, BACnet Stack:" BACNET_VERSION_TEXT
+#define BACNET_DEVICE_LOCATION "%(BACnet_Device_Location)s"
+#define BACNET_DEVICE_DESCRIPTION "%(BACnet_Device_Description)s"
+#define BACNET_DEVICE_APPSOFT_VER "%(BACnet_Device_AppSoft_Version)s"
+
+
+/* Max number of bytes in an APDU. */
+/* Typical sizes are 50, 128, 206, 480, 1024, and 1476 octets */
+/* This is used in constructing messages and to tell others our limits */
+/* 50 is the minimum; adjust to your memory and physical layer constraints */
+/* Lon=206, MS/TP=480, ARCNET=480, Ethernet=1476, BACnet/IP=1476 */
+#define MAX_APDU 1476
+/* #define MAX_APDU 128 enable this IP for testing readrange so you get the More Follows flag set */
+
+
+/* for confirmed messages, this is the number of transactions */
+/* that we hold in a queue waiting for timeout. */
+/* Configure to zero if you don't want any confirmed messages */
+/* Configure from 1..255 for number of outstanding confirmed */
+/* requests available. */
+#define MAX_TSM_TRANSACTIONS 255
+
+/* The address cache is used for binding to BACnet devices */
+/* The number of entries corresponds to the number of */
+/* devices that might respond to an I-Am on the network. */
+/* If your device is a simple server and does not need to bind, */
+/* then you don't need to use this. */
+#define MAX_ADDRESS_CACHE 255
+
+/* some modules have debugging enabled using PRINT_ENABLED */
+#define PRINT_ENABLED 0
+
+
+/* BACAPP decodes WriteProperty service requests
+ Choose the datatypes that your application supports */
+#if !(defined(BACAPP_ALL) || \
+ defined(BACAPP_NULL) || \
+ defined(BACAPP_BOOLEAN) || \
+ defined(BACAPP_UNSIGNED) || \
+ defined(BACAPP_SIGNED) || \
+ defined(BACAPP_REAL) || \
+ defined(BACAPP_DOUBLE) || \
+ defined(BACAPP_OCTET_STRING) || \
+ defined(BACAPP_CHARACTER_STRING) || \
+ defined(BACAPP_BIT_STRING) || \
+ defined(BACAPP_ENUMERATED) || \
+ defined(BACAPP_DATE) || \
+ defined(BACAPP_TIME) || \
+ defined(BACAPP_OBJECT_ID) || \
+ defined(BACAPP_DEVICE_OBJECT_PROP_REF))
+#define BACAPP_ALL
+#endif
+
+#if defined (BACAPP_ALL)
+#define BACAPP_NULL
+#define BACAPP_BOOLEAN
+#define BACAPP_UNSIGNED
+#define BACAPP_SIGNED
+#define BACAPP_REAL
+#define BACAPP_DOUBLE
+#define BACAPP_OCTET_STRING
+#define BACAPP_CHARACTER_STRING
+#define BACAPP_BIT_STRING
+#define BACAPP_ENUMERATED
+#define BACAPP_DATE
+#define BACAPP_TIME
+#define BACAPP_OBJECT_ID
+#define BACAPP_DEVICE_OBJECT_PROP_REF
+#endif
+
+/*
+** Set the maximum vector type sizes
+*/
+#define MAX_BITSTRING_BYTES (15)
+#define MAX_CHARACTER_STRING_BYTES (MAX_APDU-6)
+#define MAX_OCTET_STRING_BYTES (MAX_APDU-6)
+
+/*
+** Control the selection of services etc to enable code size reduction for those
+** compiler suites which do not handle removing of unused functions in modules
+** so well.
+**
+** We will start with the A type services code first as these are least likely
+** to be required in embedded systems using the stack.
+*/
+
+/*
+** Define the services that may be required.
+**
+**/
+
+/* For the moment enable them all to avoid breaking things */
+#define BACNET_SVC_I_HAVE_A 1 /* Do we send I_Have requests? */
+#define BACNET_SVC_WP_A 1 /* Do we send WriteProperty requests? */
+#define BACNET_SVC_RP_A 1 /* Do we send ReadProperty requests? */
+#define BACNET_SVC_RPM_A 1 /* Do we send ReadPropertyMultiple requests? */
+#define BACNET_SVC_DCC_A 1 /* Do we send DeviceCommunicationControl requests? */
+#define BACNET_SVC_RD_A 1 /* Do we send ReinitialiseDevice requests? */
+#define BACNET_SVC_TS_A 1
+#define BACNET_SVC_SERVER 0 /* Are we a pure server type device? */
+#define BACNET_USE_OCTETSTRING 1 /* Do we need any octet strings? */
+#define BACNET_USE_DOUBLE 1 /* Do we need any doubles? */
+#define BACNET_USE_SIGNED 1 /* Do we need any signed integers */
+
+/* Do them one by one */
+#ifndef BACNET_SVC_I_HAVE_A /* Do we send I_Have requests? */
+#define BACNET_SVC_I_HAVE_A 0
+#endif
+
+#ifndef BACNET_SVC_WP_A /* Do we send WriteProperty requests? */
+#define BACNET_SVC_WP_A 0
+#endif
+
+#ifndef BACNET_SVC_RP_A /* Do we send ReadProperty requests? */
+#define BACNET_SVC_RP_A 0
+#endif
+
+#ifndef BACNET_SVC_RPM_A /* Do we send ReadPropertyMultiple requests? */
+#define BACNET_SVC_RPM_A 0
+#endif
+
+#ifndef BACNET_SVC_DCC_A /* Do we send DeviceCommunicationControl requests? */
+#define BACNET_SVC_DCC_A 0
+#endif
+
+#ifndef BACNET_SVC_RD_A /* Do we send ReinitialiseDevice requests? */
+#define BACNET_SVC_RD_A 0
+#endif
+
+#ifndef BACNET_SVC_SERVER /* Are we a pure server type device? */
+#define BACNET_SVC_SERVER 1
+#endif
+
+#ifndef BACNET_USE_OCTETSTRING /* Do we need any octet strings? */
+#define BACNET_USE_OCTETSTRING 0
+#endif
+
+#ifndef BACNET_USE_DOUBLE /* Do we need any doubles? */
+#define BACNET_USE_DOUBLE 0
+#endif
+
+#ifndef BACNET_USE_SIGNED /* Do we need any signed integers */
+#define BACNET_USE_SIGNED 0
+#endif
+
+#endif /* CONFIG_BACNET_FOR_BEREMIZ_H */