Build by default with optimization level -O2 for GCC

before -O0 was used by default, that caused pretty bad performance.

Amd64, i6700k, 4200MHz, GNU/Linux (non-RT kernel), gcc 7.2.0

-------------------------------------
Optimization | EN/ENO |no EN/ENO |
-------------------------------------
default | 11 | 9.5 |
-O3 | 3.9 | 5.2 |
-O2 | 4 | 4.8 |
-Os | 4.1 | 3.5 |
-Ofast | 3.9 | 5.2 |
-------------------------------------

ARM, BBB Cortex-A8, 600Mhz, GNU/Linux, gcc 4.6.3

-------------------------------------
Optimization | EN/ENO |no EN/ENO |
-------------------------------------
default | 273 | 226 |
-O3 | 141.8 | 106.2 |
-O2 | 142 | 107 |
-Os | 152.5 | 112.2 |
-Ofast | 141.7 | 106.2 |
-------------------------------------

For embedded systems with size constaints (like Cortex-Mx, AVR and so
on) I usually use -Os. It gets pretty good results. For
GNU/Linux-based systems -O2 is usually a good choice, as you see the
test results.

     1

/* Beremiz' header file for use by extensions */

     2

     3

#include "iec_types.h"

     4

     5

#define LOG_LEVELS 4

     6

#define LOG_CRITICAL 0

     7

#define LOG_WARNING 1

     8

#define LOG_INFO 2

     9

#define LOG_DEBUG 3

    10

    11

extern unsigned long long common_ticktime__;

    12

int LogMessage(uint8_t level, char* buf, uint32_t size);

    13

long AtomicCompareExchange(long* atomicvar,long compared, long exchange);

    14