--- a/configure.ac Mon Mar 10 13:43:48 2014 +0100
+++ b/configure.ac Fri Apr 25 16:42:36 2014 +0200
@@ -247,6 +247,44 @@
AC_SUBST(KERNEL_8139TOO,[$kernel8139too])
#------------------------------------------------------------------------------
+# CCAT driver
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([ccat],
+ AS_HELP_STRING([--enable-ccat],
+ [Enable CCAT driver]),
+ [
+ case "${enableval}" in
+ yes) enableccat=1
+ ;;
+ no) enableccat=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-ccat])
+ ;;
+ esac
+ ],
+ [enableccat=0] # disabled by default
+)
+
+AM_CONDITIONAL(ENABLE_CCAT, test "x$enableccat" = "x1")
+AC_SUBST(ENABLE_CCAT,[$enableccat])
+
+AC_ARG_WITH([ccat-kernel],
+ AC_HELP_STRING(
+ [--with-ccat-kernel=<X.Y.Z>],
+ [ccat kernel (only if differing)]
+ ),
+ [
+ kernelccat=[$withval]
+ ],
+ [
+ kernelccat=$linuxversion
+ ]
+)
+
+AC_SUBST(KERNEL_CCAT,[$kernelccat])
+
+#------------------------------------------------------------------------------
# e100 driver
#------------------------------------------------------------------------------
@@ -1003,6 +1041,8 @@
Makefile
devices/Kbuild
devices/Makefile
+ devices/ccat/Kbuild
+ devices/ccat/Makefile
devices/e1000/Kbuild
devices/e1000/Makefile
devices/e1000e/Kbuild
--- a/devices/Kbuild.in Mon Mar 10 13:43:48 2014 +0100
+++ b/devices/Kbuild.in Fri Apr 25 16:42:36 2014 +0200
@@ -51,6 +51,10 @@
CFLAGS_$(EC_8139TOO_OBJ) = -DREV=$(REV)
endif
+ifeq (@ENABLE_CCAT@,1)
+ obj-m += ccat/
+endif
+
ifeq (@ENABLE_E100@,1)
EC_E100_OBJ := e100-@KERNEL_E100@-ethercat.o
obj-m += ec_e100.o
--- a/devices/Makefile.am Mon Mar 10 13:43:48 2014 +0100
+++ b/devices/Makefile.am Fri Apr 25 16:42:36 2014 +0200
@@ -28,10 +28,12 @@
#------------------------------------------------------------------------------
SUBDIRS = \
+ ccat \
e1000 \
e1000e
DIST_SUBDIRS = \
+ ccat \
e1000 \
e1000e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/CCatDefinitions.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,193 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+#ifndef _CCAT_DEFINITIONS_H_
+#define _CCAT_DEFINITIONS_H_
+
+#ifndef WINDOWS
+#include <linux/kernel.h>
+typedef uint8_t BYTE;
+typedef uint32_t ULONG;
+typedef uint16_t USHORT;
+typedef uint8_t UINT8;
+typedef uint16_t UINT16;
+typedef uint32_t UINT32;
+typedef uint64_t UINT64;
+#endif
+
+#define CCAT_DMA_FRAME_HEADER_LENGTH (196 / 8) // 196 bit
+
+typedef struct _ETHERNET_ADDRESS
+{
+ UINT8 b[6];
+}ETHERNET_ADDRESS;
+
+typedef enum CCatInfoTypes
+{
+ CCATINFO_NOTUSED = 0,
+ CCATINFO_BLOCK = 1,
+ CCATINFO_ETHERCAT_SLAVE = 2,
+ CCATINFO_ETHERCAT_MASTER = 3,
+ CCATINFO_ETHERNET_MAC = 4,
+ CCATINFO_ETHERNET_SWITCH = 5,
+ CCATINFO_SERCOS3 = 6,
+ CCATINFO_PROFIBUS = 7,
+ CCATINFO_CAN_CONTROLLER = 8,
+ CCATINFO_KBUS_MASTER = 9,
+ CCATINFO_IP_LINK = 10,
+ CCATINFO_SPI_MASTER = 11,
+ CCATINFO_I2C_MASTER = 12,
+ CCATINFO_GPIO = 13,
+ CCATINFO_DRIVEIP = 14,
+ CCATINFO_EPCS_PROM = 15,
+ CCATINFO_SYSTIME = 16,
+ CCATINFO_INTCTRL = 17,
+ CCATINFO_EEPROM = 18,
+ CCATINFO_DMA = 19,
+ CCATINFO_ETHERCAT_MASTER_DMA = 20,
+ CCATINFO_ETHERNET_MAC_DMA = 21,
+ CCATINFO_SRAM = 22,
+ CCATINFO_COPY_BLOCK = 23,
+ CCATINFO_MAX
+} _CCatInfoTypes;
+
+typedef struct
+{
+ USHORT eCCatInfoType;
+ USHORT nRevision;
+ union
+ {
+ ULONG nParam;
+ struct
+ {
+ BYTE nMaxEntries;
+ BYTE compileDay;
+ BYTE compileMonth;
+ BYTE compileYear;
+ };
+ struct
+ {
+ BYTE txDmaChn;
+ BYTE rxDmaChn;
+ };
+ struct
+ {
+ BYTE nExternalDataSize : 2;
+ BYTE reserved1 : 6;
+ BYTE nRamSize; //size = 2^ramSize
+ USHORT reserved2;
+ };
+ };
+ ULONG nAddr;
+ ULONG nSize;
+} CCatInfoBlock, *PCCatInfoBlock;
+
+typedef struct _CCatMacRegs
+{
+ union
+ {
+ struct
+ {
+ UINT8 frameLenErrCnt;
+ UINT8 rxErrCnt;
+ UINT8 crcErrCnt;
+ UINT8 linkLostErrCnt;
+ };
+ UINT32 errCnt;
+ };
+ UINT32 reserved1;
+ UINT8 dropFrameErrCnt; // 0x08
+ UINT8 reserved2[7];
+ UINT32 txFrameCnt; // 0x10
+ UINT32 rxFrameCnt; // 0x14
+ UINT32 reserved3[2];
+ UINT8 txFifoLevel : 7;
+ UINT8 reserved4 : 1;
+ UINT8 reserved5[7];
+ UINT8 txErrMemFull;
+ UINT8 reserved6[7];
+ UINT32 reserved8[18];
+ UINT8 miiConnected;
+}CCatMacRegs;
+
+typedef struct _CCatMii
+{
+ USHORT startMiCycle : 1;
+ USHORT reserved1 : 6;
+ USHORT cmdErr : 1;
+#define MII_CMD_READ 1
+#define MII_CMD_WRITE 2
+ USHORT cmd : 2;
+ USHORT reserved2 : 6;
+ USHORT phyAddr : 5;
+ USHORT reserved3 : 3;
+ USHORT phyReg : 5;
+ USHORT reserved4 : 3;
+ USHORT phyWriteData;
+ USHORT phyReadData;
+ ETHERNET_ADDRESS macAddr;
+ USHORT macFilterEnabled : 1;
+ USHORT reserved6 : 7;
+ USHORT linkStatus : 1;
+ USHORT reserved7 : 7;
+ ULONG led0;
+ ULONG led1;
+ ULONG led2[2];
+ ULONG systimeInsertion[4];
+ ULONG interruptState[2];
+ ULONG interruptMask[2];
+}CCatMii;
+
+typedef struct _CCatDmaTxFifo
+{
+ UINT32 startAddr : 24;
+ UINT32 numQuadWords : 8;
+ UINT32 reserved1;
+ UINT8 fifoReset;
+ UINT8 reserved2[7];
+}CCatDmaTxFifo;
+
+typedef union _CCatDmaRxActBuf
+{
+ struct
+ {
+ UINT32 startAddr : 24;
+ UINT32 reserved1 : 7;
+ UINT32 nextValid : 1;
+ UINT32 lastAddr : 24;
+ UINT32 reserved2 : 8;
+ UINT32 FifoLevel : 24;
+ UINT32 bufferLevel : 8;
+ UINT32 nextAddr;
+ };
+ UINT32 rxActBuf;
+}CCatDmaRxActBuf;
+
+typedef struct _CCatInfoBlockOffs
+{
+ UINT32 reserved;
+ UINT32 nMMIOffs;
+ UINT32 nTxFifoOffs;
+ UINT32 nMacRegOffs;
+ UINT32 nRxMemOffs;
+ UINT32 nTxMemOffs;
+ UINT32 nMiscOffs;
+} CCatInfoBlockOffs;
+#endif /* #ifndef _CCAT_DEFINITIONS_H_ */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/COPYING Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,339 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/Kbuild.in Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,57 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+# ---
+#
+# vim: syntax=make
+#
+#------------------------------------------------------------------------------
+
+TOPDIR := $(src)/../..
+
+REV := $(shell if test -s $(TOPDIR)/revision; then \
+ cat $(TOPDIR)/revision; \
+ else \
+ hg id -i $(TOPDIR) 2>/dev/null || echo "unknown"; \
+ fi)
+
+ifeq (@ENABLE_CCAT@,1)
+ EC_CCAT_OBJ := \
+ module.o \
+ netdev.o \
+ print.o \
+ update.o
+ obj-m += ec_ccat.o
+ ec_ccat-objs := $(EC_CCAT_OBJ)
+ CFLAGS_ccat_main-@KERNEL_CCAT@-ethercat.o = -DREV=$(REV)
+endif
+
+KBUILD_EXTRA_SYMBOLS := \
+ @abs_top_builddir@/$(LINUX_SYMVERS) \
+ @abs_top_builddir@/master/$(LINUX_SYMVERS)
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/Makefile.am Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,55 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+EXTRA_DIST = \
+ Kbuild.in \
+ COPYING \
+ module-3.4-ethercat.h \
+ module.h \
+ netdev-3.4-ethercat.h \
+ netdev.h \
+ print-3.4-ethercat.h \
+ print.h \
+ update-3.4-ethercat.h \
+ update.h
+
+BUILT_SOURCES = \
+ Kbuild
+
+modules:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
+
+modules_install:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" \
+ INSTALL_MOD_DIR="$(INSTALL_MOD_DIR)" modules_install
+
+clean-local:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/compat.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,48 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _CCAT_COMPAT_H_
+#define _CCAT_COMPAT_H_
+#include <linux/dma-mapping.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 32)
+#define pr_warn pr_info
+
+#define netdev_info(DEV, ...) pr_info(__VA_ARGS__)
+#define netdev_err netdev_info
+
+static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t * dma_handle, gfp_t flag)
+{
+ void *result =
+ dma_alloc_coherent(dev, size, dma_handle, flag | __GFP_ZERO);
+ if (result)
+ memset(result, 0, size);
+ return result;
+}
+
+static inline void usleep_range(unsigned long min, unsigned long max)
+{
+ msleep(min / 1000);
+}
+#endif
+#endif /* #ifndef _CCAT_COMPAT_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/module.c Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,306 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <asm/dma.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include "compat.h"
+#include "module.h"
+#include "netdev.h"
+#include "update.h"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Patrick Bruenn <p.bruenn@beckhoff.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static void ccat_bar_free(struct ccat_bar *bar)
+{
+ if (bar->ioaddr) {
+ const struct ccat_bar tmp = *bar;
+ memset(bar, 0, sizeof(*bar));
+ iounmap(tmp.ioaddr);
+ release_mem_region(tmp.start, tmp.len);
+ } else {
+ pr_warn("%s(): %p was already done.\n", __FUNCTION__, bar);
+ }
+}
+
+/**
+ * ccat_bar_init() - Initialize a CCAT pci bar
+ * @bar object which should be initialized
+ * @index 0 and 2 are valid for CCAT, meaning pci bar0 or pci bar2
+ * @pdev the pci device as which the CCAT was recognized before
+ *
+ * Reading PCI config space; request and map memory region.
+ */
+static int ccat_bar_init(struct ccat_bar *bar, size_t index,
+ struct pci_dev *pdev)
+{
+ struct resource *res;
+ bar->start = pci_resource_start(pdev, index);
+ bar->end = pci_resource_end(pdev, index);
+ bar->len = pci_resource_len(pdev, index);
+ bar->flags = pci_resource_flags(pdev, index);
+ if (!(IORESOURCE_MEM & bar->flags)) {
+ pr_info("bar%llu is no mem_region -> abort.\n",
+ (uint64_t) index);
+ return -EIO;
+ }
+
+ res = request_mem_region(bar->start, bar->len, DRV_NAME);
+ if (!res) {
+ pr_info("allocate mem_region failed.\n");
+ return -EIO;
+ }
+ pr_debug("bar%llu at [%lx,%lx] len=%lu res: %p.\n", (uint64_t) index,
+ bar->start, bar->end, bar->len, res);
+
+ bar->ioaddr = ioremap(bar->start, bar->len);
+ if (!bar->ioaddr) {
+ pr_info("bar%llu ioremap failed.\n", (uint64_t) index);
+ release_mem_region(bar->start, bar->len);
+ return -EIO;
+ }
+ pr_debug("bar%llu I/O mem mapped to %p.\n", (uint64_t) index,
+ bar->ioaddr);
+ return 0;
+}
+
+void ccat_dma_free(struct ccat_dma *const dma)
+{
+ const struct ccat_dma tmp = *dma;
+ free_dma(dma->channel);
+ memset(dma, 0, sizeof(*dma));
+ dma_free_coherent(tmp.dev, tmp.size, tmp.virt, tmp.phys);
+}
+
+/**
+ * ccat_dma_init() - Initialize CCAT and host memory for DMA transfer
+ * @dma object for management data which will be initialized
+ * @channel number of the DMA channel
+ * @ioaddr of the pci bar2 configspace used to calculate the address of the pci dma configuration
+ * @dev which should be configured for DMA
+ */
+int ccat_dma_init(struct ccat_dma *const dma, size_t channel,
+ void __iomem * const ioaddr, struct device *const dev)
+{
+ void *frame;
+ uint64_t addr;
+ uint32_t translateAddr;
+ uint32_t memTranslate;
+ uint32_t memSize;
+ uint32_t data = 0xffffffff;
+ uint32_t offset = (sizeof(uint64_t) * channel) + 0x1000;
+
+ dma->channel = channel;
+ dma->dev = dev;
+
+ /* calculate size and alignments */
+ iowrite32(data, ioaddr + offset);
+ wmb();
+ data = ioread32(ioaddr + offset);
+ memTranslate = data & 0xfffffffc;
+ memSize = (~memTranslate) + 1;
+ dma->size = 2 * memSize - PAGE_SIZE;
+ dma->virt = dma_zalloc_coherent(dev, dma->size, &dma->phys, GFP_KERNEL);
+ if (!dma->virt || !dma->phys) {
+ pr_info("init DMA%llu memory failed.\n", (uint64_t) channel);
+ return -1;
+ }
+
+ if (request_dma(channel, DRV_NAME)) {
+ pr_info("request dma channel %llu failed\n",
+ (uint64_t) channel);
+ ccat_dma_free(dma);
+ return -1;
+ }
+
+ translateAddr = (dma->phys + memSize - PAGE_SIZE) & memTranslate;
+ addr = translateAddr;
+ memcpy_toio(ioaddr + offset, &addr, sizeof(addr));
+ frame = dma->virt + translateAddr - dma->phys;
+ pr_debug
+ ("DMA%llu mem initialized\n virt: 0x%p\n phys: 0x%llx\n translated: 0x%llx\n pci addr: 0x%08x%x\n memTranslate: 0x%x\n size: %llu bytes.\n",
+ (uint64_t) channel, dma->virt, (uint64_t) (dma->phys), addr,
+ ioread32(ioaddr + offset + 4), ioread32(ioaddr + offset),
+ memTranslate, (uint64_t) dma->size);
+ return 0;
+}
+
+/**
+ * Initialize all available CCAT functions.
+ *
+ * Return: count of failed functions
+ */
+static int ccat_functions_init(struct ccat_device *const ccatdev)
+{
+ /* read CCatInfoBlock.nMaxEntries from ccat */
+ const uint8_t num_func = ioread8(ccatdev->bar[0].ioaddr + 4);
+ void __iomem *addr = ccatdev->bar[0].ioaddr;
+ const void __iomem *end = addr + (sizeof(CCatInfoBlock) * num_func);
+ int status = 0; //count init function failures
+
+ while (addr < end) {
+ const uint8_t type = ioread16(addr);
+ switch (type) {
+ case CCATINFO_NOTUSED:
+ break;
+ case CCATINFO_EPCS_PROM:
+ pr_info("Found: CCAT update(EPCS_PROM) -> init()\n");
+ ccatdev->update = ccat_update_init(ccatdev, addr);
+ status += (NULL == ccatdev->update);
+ break;
+ case CCATINFO_ETHERCAT_MASTER_DMA:
+ pr_info("Found: ETHERCAT_MASTER_DMA -> init()\n");
+ ccatdev->ethdev = ccat_eth_init(ccatdev, addr);
+ status += (NULL == ccatdev->ethdev);
+ break;
+ default:
+ pr_info("Found: 0x%04x not supported\n", type);
+ break;
+ }
+ addr += sizeof(CCatInfoBlock);
+ }
+ return status;
+}
+
+/**
+ * Destroy all previously initialized CCAT functions
+ */
+static void ccat_functions_remove(struct ccat_device *const ccatdev)
+{
+ if (!ccatdev->ethdev) {
+ pr_warn("%s(): 'ethdev' was not initialized.\n", __FUNCTION__);
+ } else {
+ struct ccat_eth_priv *const ethdev = ccatdev->ethdev;
+ ccatdev->ethdev = NULL;
+ ccat_eth_remove(ethdev);
+ }
+ if (!ccatdev->update) {
+ pr_warn("%s(): 'update' was not initialized.\n", __FUNCTION__);
+ } else {
+ struct ccat_update *const update = ccatdev->update;
+ ccatdev->update = NULL;
+ ccat_update_remove(update);
+ }
+}
+
+static int ccat_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int status;
+ u8 revision;
+ struct ccat_device *ccatdev = kmalloc(sizeof(*ccatdev), GFP_KERNEL);
+ if (!ccatdev) {
+ pr_err("%s() out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(ccatdev, 0, sizeof(*ccatdev));
+ ccatdev->pdev = pdev;
+ pci_set_drvdata(pdev, ccatdev);
+
+ status = pci_enable_device_mem(pdev);
+ if (status) {
+ pr_info("enable %s failed: %d\n", pdev->dev.kobj.name, status);
+ return status;
+ }
+
+ status = pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
+ if (status) {
+ pr_warn("read CCAT pci revision failed with %d\n", status);
+ return status;
+ }
+
+ /* FIXME upgrade to a newer kernel to get support of dma_set_mask_and_coherent()
+ * (!dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64))) {
+ */
+ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ pr_debug("64 bit DMA supported, pci rev: %u\n", revision);
+ /*} else if (!dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32))) { */
+ } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
+ pr_debug("32 bit DMA supported, pci rev: %u\n", revision);
+ } else {
+ pr_warn("No suitable DMA available, pci rev: %u\n", revision);
+ }
+
+ if (ccat_bar_init(&ccatdev->bar[0], 0, pdev)) {
+ pr_warn("initialization of bar0 failed.\n");
+ return -EIO;
+ }
+
+ if (ccat_bar_init(&ccatdev->bar[2], 2, pdev)) {
+ pr_warn("initialization of bar2 failed.\n");
+ return -EIO;
+ }
+
+ pci_set_master(pdev);
+ if (ccat_functions_init(ccatdev)) {
+ pr_warn("some functions couldn't be initialized\n");
+ }
+ return 0;
+}
+
+static void ccat_remove(struct pci_dev *pdev)
+{
+ struct ccat_device *ccatdev = pci_get_drvdata(pdev);
+ if (ccatdev) {
+ ccat_functions_remove(ccatdev);
+ ccat_bar_free(&ccatdev->bar[2]);
+ ccat_bar_free(&ccatdev->bar[0]);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ kfree(ccatdev);
+ }
+ pr_debug("%s() done.\n", __FUNCTION__);
+}
+
+#define PCI_DEVICE_ID_BECKHOFF_CCAT 0x5000
+#define PCI_VENDOR_ID_BECKHOFF 0x15EC
+
+static const struct pci_device_id pci_ids[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_BECKHOFF, PCI_DEVICE_ID_BECKHOFF_CCAT)},
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pci_ids,
+ .probe = ccat_probe,
+ .remove = ccat_remove,
+};
+
+static void ccat_exit_module(void)
+{
+ pci_unregister_driver(&pci_driver);
+}
+
+static int ccat_init_module(void)
+{
+ BUILD_BUG_ON(offsetof(struct ccat_eth_frame, data) !=
+ CCAT_DMA_FRAME_HEADER_LENGTH);
+ pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ return pci_register_driver(&pci_driver);
+}
+
+module_exit(ccat_exit_module);
+module_init(ccat_init_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/module.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,208 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _CCAT_H_
+#define _CCAT_H_
+
+#include <linux/cdev.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include "CCatDefinitions.h"
+#include "../ecdev.h"
+
+#define DRV_NAME "ec_ccat"
+#define DRV_EXTRAVERSION "-ec"
+#define DRV_VERSION "0.8" DRV_EXTRAVERSION
+#define DRV_DESCRIPTION "Beckhoff CCAT Ethernet/EtherCAT Network Driver"
+
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/**
+ * struct ccat_bar - CCAT PCI Base Address Register(BAR) configuration
+ * @start: start address of this BAR
+ * @end: end address of this BAR
+ * @len: length of this BAR
+ * @flags: flags set on this BAR
+ * @ioaddr: ioremapped address of this bar
+ */
+struct ccat_bar {
+ unsigned long start;
+ unsigned long end;
+ unsigned long len;
+ unsigned long flags;
+ void __iomem *ioaddr;
+};
+
+/**
+ * struct ccat_dma - CCAT DMA channel configuration
+ * @phys: device-viewed address(physical) of the associated DMA memory
+ * @virt: CPU-viewed address(virtual) of the associated DMA memory
+ * @size: number of bytes in the associated DMA memory
+ * @channel: CCAT DMA channel number
+ * @dev: valid struct device pointer
+ */
+struct ccat_dma {
+ dma_addr_t phys;
+ void *virt;
+ size_t size;
+ size_t channel;
+ struct device *dev;
+};
+
+extern void ccat_dma_free(struct ccat_dma *const dma);
+extern int ccat_dma_init(struct ccat_dma *const dma, size_t channel,
+ void __iomem * const ioaddr, struct device *const dev);
+
+/**
+ * struct ccat_eth_frame - Ethernet frame with DMA descriptor header in front
+ * @reservedn: is not used and should always be set to 0
+ * @received: used for reception, is set to 1 by the CCAT when data was written
+ * @length: number of bytes in the frame including the DMA header
+ * @sent: is set to 1 by the CCAT when data was transmitted
+ * @timestamp: a 64 bit EtherCAT timestamp
+ * @data: the bytes of the ethernet frame
+ */
+struct ccat_eth_frame {
+ uint32_t reserved1;
+ uint32_t received:1;
+ uint32_t reserved2:31;
+ uint16_t length;
+ uint16_t reserved3;
+ uint32_t sent:1;
+ uint32_t reserved4:31;
+ uint64_t timestamp;
+ uint8_t data[0x800 - 3 * sizeof(uint64_t)];
+};
+
+/**
+ * struct ccat_eth_register - CCAT register addresses in the PCI BAR
+ * @mii: address of the CCAT management interface register
+ * @tx_fifo: address of the CCAT TX DMA fifo register
+ * @rx_fifo: address of the CCAT RX DMA fifo register
+ * @mac: address of the CCAT media access control register
+ * @rx_mem: address of the CCAT register holding the RX DMA address
+ * @tx_mem: address of the CCAT register holding the TX DMA address
+ * @misc: address of a CCAT register holding miscellaneous information
+ */
+struct ccat_eth_register {
+ void __iomem *mii;
+ void __iomem *tx_fifo;
+ void __iomem *rx_fifo;
+ void __iomem *mac;
+ void __iomem *rx_mem;
+ void __iomem *tx_mem;
+ void __iomem *misc;
+};
+
+/**
+ * struct ccat_eth_dma_fifo - CCAT RX or TX DMA fifo
+ * @add: callback used to add a frame to this fifo
+ * @reg: PCI register address of this DMA fifo
+ * @dma: information about the associated DMA memory
+ */
+struct ccat_eth_dma_fifo {
+ void (*add) (struct ccat_eth_frame *, struct ccat_eth_dma_fifo *);
+ void __iomem *reg;
+ struct ccat_dma dma;
+};
+
+/**
+ * struct ccat_device - CCAT device representation
+ * @pdev: pointer to the pci object allocated by the kernel
+ * @ethdev: CCAT Ethernet/EtherCAT Master (with DMA) function, NULL if function is not available or failed to initialize
+ * @update: CCAT Update function, NULL if function is not available or failed to initialize
+ * @bar [0] and [2] holding information about PCI BARs 0 and 2.
+ *
+ * One instance of a ccat_device should represent a physical CCAT. Since
+ * a CCAT is implemented as FPGA the available functions can vary so
+ * the function object pointers can be NULL.
+ * Extra note: you will recognize that PCI BAR1 is not used and is a
+ * waste of memory, thats true but right now, its very easy to use it
+ * this way. So we might optimize it later.
+ */
+struct ccat_device {
+ struct pci_dev *pdev;
+ struct ccat_eth_priv *ethdev;
+ struct ccat_update *update;
+ struct ccat_bar bar[3]; //TODO optimize this
+};
+
+/**
+ * struct ccat_eth_priv - CCAT Ethernet/EtherCAT Master function (netdev)
+ * @ccatdev: pointer to the parent struct ccat_device
+ * @netdev: the net_device structure used by the kernel networking stack
+ * @poll_thread: is used to poll status registers like link state
+ * @rx_thread: thread which does housekeeping of RX DMA descriptors
+ * @tx_thread: thread which does housekeeping of TX DMA descriptors
+ * @next_tx_frame: pointer to the next TX DMA descriptor, which the tx_thread should check for availablity
+ * @info: holds a copy of the CCAT Ethernet/EtherCAT Master function information block (read from PCI config space)
+ * @reg: register addresses in PCI config space of the Ethernet/EtherCAT Master function
+ * @rx_fifo: DMA fifo used for RX DMA descriptors
+ * @tx_fifo: DMA fifo used for TX DMA descriptors
+ * @rx_bytes: number of bytes received -> reported with ndo_get_stats64()
+ * @rx_dropped: number of received frames, which were dropped -> reported with ndo_get_stats64()
+ * @tx_bytes: number of bytes send -> reported with ndo_get_stats64()
+ * @tx_dropped: number of frames requested to send, which were dropped -> reported with ndo_get_stats64()
+ */
+struct ccat_eth_priv {
+ const struct ccat_device *ccatdev;
+ struct net_device *netdev;
+ struct task_struct *poll_thread;
+ struct task_struct *rx_thread;
+ struct task_struct *tx_thread;
+ const struct ccat_eth_frame *next_tx_frame; /* next frame the tx_thread should check for availability */
+ CCatInfoBlock info;
+ struct ccat_eth_register reg;
+ struct ccat_eth_dma_fifo rx_fifo;
+ struct ccat_eth_dma_fifo tx_fifo;
+ atomic64_t rx_bytes;
+ atomic64_t rx_dropped;
+ atomic64_t tx_bytes;
+ atomic64_t tx_dropped;
+ ec_device_t *ecdev;
+ void (*carrier_off) (struct net_device * const netdev);
+ void (*carrier_on) (struct net_device * const netdev);
+ void (*kfree_skb_any) (struct sk_buff * skb);
+ void (*start_queue) (struct net_device * const netdev);
+ void (*stop_queue) (struct net_device * const netdev);
+ void (*tx_fifo_full) (struct net_device * const dev,
+ const struct ccat_eth_frame * const frame);
+ void (*unregister) (struct net_device * const netdev);
+};
+
+/**
+ * struct ccat_update - CCAT Update function (update)
+ * @ccatdev: pointer to the parent struct ccat_device
+ * @ioaddr: PCI base address of the CCAT Update function
+ * dev: device number for this update function
+ * cdev: character device used for the CCAT Update function
+ * class: pointer to a device class used when registering the CCAT Update device
+ * @info: holds a copy of the CCAT Update function information block (read from PCI config space)
+ */
+struct ccat_update {
+ struct kref refcount;
+ void __iomem *ioaddr;
+ dev_t dev;
+ struct cdev cdev;
+ struct class *class;
+ CCatInfoBlock info;
+};
+#endif /* #ifndef _CCAT_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/netdev.c Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,595 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kfifo.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+
+#include "compat.h"
+#include "module.h"
+#include "netdev.h"
+#include "print.h"
+
+/**
+ * EtherCAT frame to enable forwarding on EtherCAT Terminals
+ */
+static const UINT8 frameForwardEthernetFrames[] = {
+ 0x01, 0x01, 0x05, 0x01, 0x00, 0x00,
+ 0x00, 0x1b, 0x21, 0x36, 0x1b, 0xce,
+ 0x88, 0xa4, 0x0e, 0x10,
+ 0x08,
+ 0x00,
+ 0x00, 0x00,
+ 0x00, 0x01,
+ 0x02, 0x00,
+ 0x00, 0x00,
+ 0x00, 0x00,
+ 0x00, 0x00
+};
+
+#define FIFO_LENGTH 64
+#define DMA_POLL_DELAY_RANGE_USECS 100, 100 /* time to sleep between rx/tx DMA polls */
+#define POLL_DELAY_RANGE_USECS 500, 1000 /* time to sleep between link state polls */
+
+static void ec_poll(struct net_device *dev);
+static int run_poll_thread(void *data);
+static int run_rx_thread(void *data);
+static int run_tx_thread(void *data);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+static struct rtnl_link_stats64 *ccat_eth_get_stats64(struct net_device *dev, struct rtnl_link_stats64
+ *storage);
+#endif
+static int ccat_eth_open(struct net_device *dev);
+static netdev_tx_t ccat_eth_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int ccat_eth_stop(struct net_device *dev);
+static void ccat_eth_xmit_raw(struct net_device *dev, const char *data,
+ size_t len);
+
+static const struct net_device_ops ccat_eth_netdev_ops = {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+ .ndo_get_stats64 = ccat_eth_get_stats64,
+#endif
+ .ndo_open = ccat_eth_open,
+ .ndo_start_xmit = ccat_eth_start_xmit,
+ .ndo_stop = ccat_eth_stop,
+};
+
+static void ecdev_kfree_skb_any(struct sk_buff *skb)
+{
+ /* never release a skb in EtherCAT mode */
+}
+
+static void ecdev_carrier_on(struct net_device *const netdev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(netdev);
+ ecdev_set_link(priv->ecdev, 1);
+}
+
+static void ecdev_carrier_off(struct net_device *const netdev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(netdev);
+ ecdev_set_link(priv->ecdev, 0);
+}
+
+static void ecdev_nop(struct net_device *const netdev)
+{
+ /* dummy called if nothing has to be done in EtherCAT operation mode */
+}
+
+static void ecdev_tx_fifo_full(struct net_device *const dev,
+ const struct ccat_eth_frame *const frame)
+{
+ /* we are polled -> there is nothing we can do in EtherCAT mode */
+}
+
+static void unregister_ecdev(struct net_device *const netdev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(netdev);
+ ecdev_close(priv->ecdev);
+ ecdev_withdraw(priv->ecdev);
+}
+
+typedef void (*fifo_add_function) (struct ccat_eth_frame *,
+ struct ccat_eth_dma_fifo *);
+
+static void ccat_eth_rx_fifo_add(struct ccat_eth_frame *frame,
+ struct ccat_eth_dma_fifo *fifo)
+{
+ const size_t offset = ((void *)(frame) - fifo->dma.virt);
+ const uint32_t addr_and_length = (1 << 31) | offset;
+ frame->received = 0;
+ iowrite32(addr_and_length, fifo->reg);
+}
+
+static void ccat_eth_tx_fifo_add_free(struct ccat_eth_frame *frame,
+ struct ccat_eth_dma_fifo *fifo)
+{
+ /* mark frame as ready to use for tx */
+ frame->sent = 1;
+}
+
+static void ccat_eth_tx_fifo_full(struct net_device *const dev,
+ const struct ccat_eth_frame *const frame)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ netif_stop_queue(dev);
+ priv->next_tx_frame = frame;
+ wake_up_process(priv->tx_thread);
+}
+
+static void ccat_eth_dma_fifo_reset(struct ccat_eth_dma_fifo *fifo)
+{
+ struct ccat_eth_frame *frame = fifo->dma.virt;
+ const struct ccat_eth_frame *const end = frame + FIFO_LENGTH;
+
+ /* reset hw fifo */
+ iowrite32(0, fifo->reg + 0x8);
+ wmb();
+
+ if (fifo->add) {
+ while (frame < end) {
+ fifo->add(frame, fifo);
+ ++frame;
+ }
+ }
+}
+
+static int ccat_eth_dma_fifo_init(struct ccat_eth_dma_fifo *fifo,
+ void __iomem * const fifo_reg,
+ fifo_add_function add, size_t channel,
+ struct ccat_eth_priv *const priv)
+{
+ if (0 !=
+ ccat_dma_init(&fifo->dma, channel, priv->ccatdev->bar[2].ioaddr,
+ &priv->ccatdev->pdev->dev)) {
+ pr_info("init DMA%llu memory failed.\n", (uint64_t) channel);
+ return -1;
+ }
+ fifo->add = add;
+ fifo->reg = fifo_reg;
+ return 0;
+}
+
+/**
+ * Stop both (Rx/Tx) DMA fifo's and free related management structures
+ */
+static void ccat_eth_priv_free_dma(struct ccat_eth_priv *priv)
+{
+ /* reset hw fifo's */
+ iowrite32(0, priv->rx_fifo.reg + 0x8);
+ iowrite32(0, priv->tx_fifo.reg + 0x8);
+ wmb();
+
+ /* release dma */
+ ccat_dma_free(&priv->rx_fifo.dma);
+ ccat_dma_free(&priv->tx_fifo.dma);
+ pr_debug("DMA fifo's stopped.\n");
+}
+
+/**
+ * Initalizes both (Rx/Tx) DMA fifo's and related management structures
+ */
+static int ccat_eth_priv_init_dma(struct ccat_eth_priv *priv)
+{
+ if (ccat_eth_dma_fifo_init
+ (&priv->rx_fifo, priv->reg.rx_fifo, ccat_eth_rx_fifo_add,
+ priv->info.rxDmaChn, priv)) {
+ pr_warn("init Rx DMA fifo failed.\n");
+ return -1;
+ }
+
+ if (ccat_eth_dma_fifo_init
+ (&priv->tx_fifo, priv->reg.tx_fifo, ccat_eth_tx_fifo_add_free,
+ priv->info.txDmaChn, priv)) {
+ pr_warn("init Tx DMA fifo failed.\n");
+ ccat_dma_free(&priv->rx_fifo.dma);
+ return -1;
+ }
+
+ /* disable MAC filter */
+ iowrite8(0, priv->reg.mii + 0x8 + 6);
+ wmb();
+ return 0;
+}
+
+/**
+ * Initializes the CCat... members of the ccat_eth_priv structure.
+ * Call this function only if info and ioaddr are already initialized!
+ */
+static void ccat_eth_priv_init_mappings(struct ccat_eth_priv *priv)
+{
+ CCatInfoBlockOffs offsets;
+ void __iomem *const func_base =
+ priv->ccatdev->bar[0].ioaddr + priv->info.nAddr;
+ memcpy_fromio(&offsets, func_base, sizeof(offsets));
+ priv->reg.mii = func_base + offsets.nMMIOffs;
+ priv->reg.tx_fifo = func_base + offsets.nTxFifoOffs;
+ priv->reg.rx_fifo = func_base + offsets.nTxFifoOffs + 0x10;
+ priv->reg.mac = func_base + offsets.nMacRegOffs;
+ priv->reg.rx_mem = func_base + offsets.nRxMemOffs;
+ priv->reg.tx_mem = func_base + offsets.nTxMemOffs;
+ priv->reg.misc = func_base + offsets.nMiscOffs;
+}
+
+/**
+ * Read link state from CCAT hardware
+ * @return 1 if link is up, 0 if not
+ */
+inline static size_t ccat_eth_priv_read_link_state(const struct ccat_eth_priv
+ *const priv)
+{
+ return (1 << 24) == (ioread32(priv->reg.mii + 0x8 + 4) & (1 << 24));
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+static struct rtnl_link_stats64 *ccat_eth_get_stats64(struct net_device *dev, struct rtnl_link_stats64
+ *storage)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ CCatMacRegs mac;
+ memcpy_fromio(&mac, priv->reg.mac, sizeof(mac));
+ storage->rx_packets = mac.rxFrameCnt; /* total packets received */
+ storage->tx_packets = mac.txFrameCnt; /* total packets transmitted */
+ storage->rx_bytes = atomic64_read(&priv->rx_bytes); /* total bytes received */
+ storage->tx_bytes = atomic64_read(&priv->tx_bytes); /* total bytes transmitted */
+ storage->rx_errors = mac.frameLenErrCnt + mac.dropFrameErrCnt + mac.crcErrCnt + mac.rxErrCnt; /* bad packets received */
+ //TODO __u64 tx_errors; /* packet transmit problems */
+ storage->rx_dropped = atomic64_read(&priv->rx_dropped); /* no space in linux buffers */
+ storage->tx_dropped = atomic64_read(&priv->tx_dropped); /* no space available in linux */
+ //TODO __u64 multicast; /* multicast packets received */
+ //TODO __u64 collisions;
+
+ /* detailed rx_errors: */
+ storage->rx_length_errors = mac.frameLenErrCnt;
+ storage->rx_over_errors = mac.dropFrameErrCnt; /* receiver ring buff overflow */
+ storage->rx_crc_errors = mac.crcErrCnt; /* recved pkt with crc error */
+ storage->rx_frame_errors = mac.rxErrCnt; /* recv'd frame alignment error */
+ storage->rx_fifo_errors = mac.dropFrameErrCnt; /* recv'r fifo overrun */
+ //TODO __u64 rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ //TODO __u64 tx_aborted_errors;
+ //TODO __u64 tx_carrier_errors;
+ //TODO __u64 tx_fifo_errors;
+ //TODO __u64 tx_heartbeat_errors;
+ //TODO __u64 tx_window_errors;
+
+ /* for cslip etc */
+ //TODO __u64 rx_compressed;
+ //TODO __u64 tx_compressed;
+ return storage;
+}
+#endif
+
+struct ccat_eth_priv *ccat_eth_init(const struct ccat_device *const ccatdev,
+ const void __iomem * const addr)
+{
+ struct ccat_eth_priv *priv;
+ struct net_device *const netdev = alloc_etherdev(sizeof(*priv));
+ priv = netdev_priv(netdev);
+ priv->netdev = netdev;
+ priv->ccatdev = ccatdev;
+
+ /* ccat register mappings */
+ memcpy_fromio(&priv->info, addr, sizeof(priv->info));
+ ccat_eth_priv_init_mappings(priv);
+ ccat_print_function_info(priv);
+
+ if (ccat_eth_priv_init_dma(priv)) {
+ pr_warn("%s(): DMA initialization failed.\n", __FUNCTION__);
+ free_netdev(netdev);
+ return NULL;
+ }
+
+ /* init netdev with MAC and stack callbacks */
+ memcpy_fromio(netdev->dev_addr, priv->reg.mii + 8, 6);
+ netdev->netdev_ops = &ccat_eth_netdev_ops;
+
+ /* use as EtherCAT device? */
+ priv->ecdev = ecdev_offer(netdev, ec_poll, THIS_MODULE);
+ if (priv->ecdev) {
+ priv->carrier_off = ecdev_carrier_off;
+ priv->carrier_on = ecdev_carrier_on;
+ priv->kfree_skb_any = ecdev_kfree_skb_any;
+ priv->start_queue = ecdev_nop;
+ priv->stop_queue = ecdev_nop;
+ priv->tx_fifo_full = ecdev_tx_fifo_full;
+ priv->unregister = unregister_ecdev;
+ if (ecdev_open(priv->ecdev)) {
+ pr_info("unable to register network device.\n");
+ ecdev_withdraw(priv->ecdev);
+ ccat_eth_priv_free_dma(priv);
+ free_netdev(netdev);
+ return NULL;
+ }
+ return priv;
+ }
+
+ /* EtherCAT disabled -> prepare normal ethernet mode */
+ priv->carrier_off = netif_carrier_off;
+ priv->carrier_on = netif_carrier_on;
+ priv->kfree_skb_any = dev_kfree_skb_any;
+ priv->start_queue = netif_start_queue;
+ priv->stop_queue = netif_stop_queue;
+ priv->tx_fifo_full = ccat_eth_tx_fifo_full;
+ priv->unregister = unregister_netdev;
+ if (register_netdev(netdev)) {
+ pr_info("unable to register network device.\n");
+ ccat_eth_priv_free_dma(priv);
+ free_netdev(netdev);
+ return NULL;
+ }
+ pr_info("registered %s as network device.\n", netdev->name);
+ priv->rx_thread = kthread_run(run_rx_thread, netdev, "%s_rx", DRV_NAME);
+ priv->tx_thread = kthread_run(run_tx_thread, netdev, "%s_tx", DRV_NAME);
+ return priv;
+}
+
+void ccat_eth_remove(struct ccat_eth_priv *const priv)
+{
+ if (priv->rx_thread) {
+ kthread_stop(priv->rx_thread);
+ }
+ if (priv->tx_thread) {
+ kthread_stop(priv->tx_thread);
+ }
+ priv->unregister(priv->netdev);
+ ccat_eth_priv_free_dma(priv);
+ free_netdev(priv->netdev);
+ pr_debug("%s(): done\n", __FUNCTION__);
+}
+
+static int ccat_eth_open(struct net_device *dev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ priv->carrier_off(dev);
+ priv->poll_thread =
+ kthread_run(run_poll_thread, dev, "%s_poll", DRV_NAME);
+
+ //TODO
+ return 0;
+}
+
+static const size_t CCATRXDESC_HEADER_LEN = 20;
+static void ccat_eth_receive(struct net_device *const dev,
+ const struct ccat_eth_frame *const frame)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ const size_t len = frame->length - CCATRXDESC_HEADER_LEN;
+ struct sk_buff *skb = dev_alloc_skb(len + NET_IP_ALIGN);
+ if (!skb) {
+ pr_info("%s() out of memory :-(\n", __FUNCTION__);
+ atomic64_inc(&priv->rx_dropped);
+ return;
+ }
+ skb->dev = dev;
+ skb_reserve(skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data(skb, frame->data, len);
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ atomic64_add(len, &priv->rx_bytes);
+ netif_rx(skb);
+}
+
+/**
+ * Rx handler in EtherCAT operation mode
+ * priv->ecdev should always be valid!
+ */
+static void ec_poll(struct net_device *dev)
+{
+ static size_t next = 0;
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ struct ccat_eth_frame *frame =
+ ((struct ccat_eth_frame *)priv->rx_fifo.dma.virt) + next;
+ if (frame->received) {
+ ecdev_receive(priv->ecdev, frame->data,
+ frame->length - CCATRXDESC_HEADER_LEN);
+ frame->received = 0;
+ ccat_eth_rx_fifo_add(frame, &priv->rx_fifo);
+ next = (next + 1) % FIFO_LENGTH;
+ } else {
+ //TODO dev_warn(&dev->dev, "%s(): frame was not ready\n", __FUNCTION__);
+ }
+}
+
+static netdev_tx_t ccat_eth_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ static size_t next = 0;
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ struct ccat_eth_frame *const frame =
+ ((struct ccat_eth_frame *)priv->tx_fifo.dma.virt);
+ uint32_t addr_and_length;
+
+ if (skb_is_nonlinear(skb)) {
+ pr_warn("Non linear skb not supported -> drop frame.\n");
+ atomic64_inc(&priv->tx_dropped);
+ priv->kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len > sizeof(frame->data)) {
+ pr_warn("skb.len %llu exceeds dma buffer %llu -> drop frame.\n",
+ (uint64_t) skb->len, (uint64_t) sizeof(frame->data));
+ atomic64_inc(&priv->tx_dropped);
+ priv->kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (!frame[next].sent) {
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
+ ccat_eth_tx_fifo_full(dev, &frame[next]);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* prepare frame in DMA memory */
+ frame[next].sent = 0;
+ frame[next].length = skb->len;
+ memcpy(frame[next].data, skb->data, skb->len);
+
+ priv->kfree_skb_any(skb);
+
+ addr_and_length = 8 + (next * sizeof(*frame));
+ addr_and_length +=
+ ((frame[next].length + CCAT_DMA_FRAME_HEADER_LENGTH) / 8) << 24;
+ iowrite32(addr_and_length, priv->reg.tx_fifo); /* add to DMA fifo */
+ atomic64_add(frame[next].length, &priv->tx_bytes); /* update stats */
+
+ next = (next + 1) % FIFO_LENGTH;
+ /* stop queue if tx ring is full */
+ if (!frame[next].sent) {
+ ccat_eth_tx_fifo_full(dev, &frame[next]);
+ }
+ return NETDEV_TX_OK;
+}
+
+static int ccat_eth_stop(struct net_device *dev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ priv->stop_queue(dev);
+ if (priv->poll_thread) {
+ /* TODO care about smp context? */
+ kthread_stop(priv->poll_thread);
+ priv->poll_thread = NULL;
+ }
+ netdev_info(dev, "stopped.\n");
+ return 0;
+}
+
+static void ccat_eth_link_down(struct net_device *dev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ priv->stop_queue(dev);
+ priv->carrier_off(dev);
+ netdev_info(dev, "NIC Link is Down\n");
+}
+
+static void ccat_eth_link_up(struct net_device *const dev)
+{
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ netdev_info(dev, "NIC Link is Up\n");
+ /* TODO netdev_info(dev, "NIC Link is Up %u Mbps %s Duplex\n",
+ speed == SPEED_100 ? 100 : 10,
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); */
+
+ ccat_eth_dma_fifo_reset(&priv->rx_fifo);
+ ccat_eth_dma_fifo_reset(&priv->tx_fifo);
+ ccat_eth_xmit_raw(dev, frameForwardEthernetFrames,
+ sizeof(frameForwardEthernetFrames));
+ priv->carrier_on(dev);
+ priv->start_queue(dev);
+}
+
+/**
+ * Function to transmit a raw buffer to the network (f.e. frameForwardEthernetFrames)
+ * @dev a valid net_device
+ * @data pointer to your raw buffer
+ * @len number of bytes in the raw buffer to transmit
+ */
+static void ccat_eth_xmit_raw(struct net_device *dev, const char *const data,
+ size_t len)
+{
+ struct sk_buff *skb = dev_alloc_skb(len);
+ skb->dev = dev;
+ skb_copy_to_linear_data(skb, data, len);
+ skb_put(skb, len);
+ ccat_eth_start_xmit(skb, dev);
+}
+
+/**
+ * Since CCAT doesn't support interrupts until now, we have to poll
+ * some status bits to recognize things like link change etc.
+ */
+static int run_poll_thread(void *data)
+{
+ struct net_device *const dev = (struct net_device *)data;
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ size_t link = 0;
+
+ while (!kthread_should_stop()) {
+ if (ccat_eth_priv_read_link_state(priv) != link) {
+ link = !link;
+ link ? ccat_eth_link_up(dev) : ccat_eth_link_down(dev);
+ }
+ usleep_range(POLL_DELAY_RANGE_USECS);
+ }
+ pr_debug("%s() stopped.\n", __FUNCTION__);
+ return 0;
+}
+
+static int run_rx_thread(void *data)
+{
+ struct net_device *const dev = (struct net_device *)data;
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+ struct ccat_eth_frame *frame = priv->rx_fifo.dma.virt;
+ const struct ccat_eth_frame *const end = frame + FIFO_LENGTH;
+
+ while (!kthread_should_stop()) {
+ /* wait until frame was used by DMA for Rx */
+ while (!kthread_should_stop() && !frame->received) {
+ usleep_range(DMA_POLL_DELAY_RANGE_USECS);
+ }
+
+ /* can be NULL, if we are asked to stop! */
+ if (frame->received) {
+ ccat_eth_receive(dev, frame);
+ frame->received = 0;
+ ccat_eth_rx_fifo_add(frame, &priv->rx_fifo);
+ }
+ if (++frame >= end) {
+ frame = priv->rx_fifo.dma.virt;
+ }
+ }
+ pr_debug("%s() stopped.\n", __FUNCTION__);
+ return 0;
+}
+
+/**
+ * Polling of tx dma descriptors in ethernet operating mode
+ */
+static int run_tx_thread(void *data)
+{
+ struct net_device *const dev = (struct net_device *)data;
+ struct ccat_eth_priv *const priv = netdev_priv(dev);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ const struct ccat_eth_frame *const frame = priv->next_tx_frame;
+ if (frame) {
+ while (!kthread_should_stop() && !frame->sent) {
+ usleep_range(DMA_POLL_DELAY_RANGE_USECS);
+ }
+ }
+ netif_wake_queue(dev);
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ set_current_state(TASK_RUNNING);
+ pr_debug("%s() stopped.\n", __FUNCTION__);
+ return 0;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/netdev.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,26 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _NETDEV_H_
+#define _NETDEV_H_
+extern struct ccat_eth_priv *ccat_eth_init(const struct ccat_device *ccatdev,
+ const void __iomem * addr);
+extern void ccat_eth_remove(struct ccat_eth_priv *priv);
+#endif /* #ifndef _NETDEV_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/print.c Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,180 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <linux/kernel.h>
+#include "CCatDefinitions.h"
+#include "module.h"
+#include "print.h"
+
+#define TESTING_ENABLED 1
+void print_mem(const unsigned char *p, size_t lines)
+{
+#if TESTING_ENABLED
+ pr_info("mem at: %p\n", p);
+ pr_info(" 0 1 2 3 4 5 6 7 8 9 A B C D E F\n");
+ while (lines > 0) {
+ pr_info
+ ("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], p[9],
+ p[10], p[11], p[12], p[13], p[14], p[15]);
+ p += 16;
+ --lines;
+ }
+#endif /* #if TESTING_ENABLED */
+}
+
+static const char *CCatFunctionTypes[CCATINFO_MAX + 1] = {
+ "not used",
+ "Informationblock",
+ "EtherCAT Slave",
+ "EtherCAT Master without DMA",
+ "Ethernet MAC without DMA",
+ "Ethernet Switch",
+ "Sercos III",
+ "Profibus",
+ "CAN Controller",
+ "KBUS Master",
+ "IP-Link Master (planned)",
+ "SPI Master",
+ "I²C",
+ "GPIO",
+ "Drive",
+ "CCAT Update",
+ "Systemtime",
+ "Interrupt Controller",
+ "EEPROM Controller",
+ "DMA Controller",
+ "EtherCAT Master with DMA",
+ "Ethernet MAC with DMA",
+ "SRAM Interface",
+ "Internal Copy block",
+ "unknown"
+};
+
+static void print_CCatDmaRxActBuf(const struct ccat_eth_priv *const priv)
+{
+ CCatDmaRxActBuf rx_fifo;
+ memcpy_fromio(&rx_fifo, priv->reg.rx_fifo, sizeof(rx_fifo));
+ pr_debug("Rx FIFO base address: %p\n", priv->reg.rx_fifo);
+ pr_debug(" Rx Frame Header start: 0x%08x\n", rx_fifo.startAddr);
+ pr_debug(" reserved: 0x%08x\n", rx_fifo.reserved1);
+ pr_debug(" Rx start address valid: %8u\n", rx_fifo.nextValid);
+ pr_debug(" reserved: 0x%08x\n", rx_fifo.reserved2);
+ pr_debug(" FIFO level: 0x%08x\n", rx_fifo.FifoLevel);
+ pr_debug(" Buffer level: 0x%08x\n", rx_fifo.bufferLevel);
+ pr_debug(" next address: 0x%08x\n", rx_fifo.nextAddr);
+}
+
+static void print_CCatDmaTxFifo(const struct ccat_eth_priv *const priv)
+{
+ CCatDmaTxFifo tx_fifo;
+ memcpy_fromio(&tx_fifo, priv->reg.tx_fifo, sizeof(tx_fifo));
+ pr_debug("Tx FIFO base address: %p\n", priv->reg.tx_fifo);
+ pr_debug(" Tx Frame Header start: 0x%08x\n", tx_fifo.startAddr);
+ pr_debug(" # 64 bit words: %10d\n", tx_fifo.numQuadWords);
+ pr_debug(" reserved: 0x%08x\n", tx_fifo.reserved1);
+ pr_debug(" FIFO reset: 0x%08x\n", tx_fifo.fifoReset);
+}
+
+static void print_CCatInfoBlock(const CCatInfoBlock * info,
+ const void __iomem * const base_addr)
+{
+ const size_t index = min((int)info->eCCatInfoType, CCATINFO_MAX);
+ pr_debug("%s\n", CCatFunctionTypes[index]);
+ pr_debug(" revision: 0x%x\n", info->nRevision);
+ pr_debug(" RX channel: %d\n", info->rxDmaChn);
+ pr_debug(" TX channel: %d\n", info->txDmaChn);
+ pr_debug(" baseaddr: 0x%x\n", info->nAddr);
+ pr_debug(" size: 0x%x\n", info->nSize);
+ pr_debug(" subfunction: %p\n", base_addr);
+}
+
+static void print_CCatMacRegs(const struct ccat_eth_priv *const priv)
+{
+ CCatMacRegs mac;
+ memcpy_fromio(&mac, priv->reg.mac, sizeof(mac));
+ pr_debug("MAC base address: %p\n", priv->reg.mac);
+ pr_debug(" frame length error count: %10d\n", mac.frameLenErrCnt);
+ pr_debug(" RX error count: %10d\n", mac.rxErrCnt);
+ pr_debug(" CRC error count: %10d\n", mac.crcErrCnt);
+ pr_debug(" Link lost error count: %10d\n", mac.linkLostErrCnt);
+ pr_debug(" reserved: 0x%08x\n", mac.reserved1);
+ pr_debug(" RX overflow count: %10d\n",
+ mac.dropFrameErrCnt);
+ pr_debug(" DMA overflow count: %10d\n", mac.reserved2[0]);
+ //pr_debug(" reserverd: %10d\n", DRV_NAME, mac.reserved2[1]);
+ pr_debug(" TX frame counter: %10d\n", mac.txFrameCnt);
+ pr_debug(" RX frame counter: %10d\n", mac.rxFrameCnt);
+ pr_debug(" TX-FIFO level: 0x%08x\n", mac.txFifoLevel);
+ pr_debug(" MII connection: 0x%08x\n", mac.miiConnected);
+}
+
+static void print_CCatMii(const struct ccat_eth_priv *const priv)
+{
+ CCatMii mii;
+ memcpy_fromio(&mii, priv->reg.mii, sizeof(mii));
+ pr_debug("MII base address: %p\n", priv->reg.mii);
+ pr_debug(" MII cycle: %s\n",
+ mii.startMiCycle ? "running" : "no cycle");
+ pr_debug(" reserved: 0x%x\n", mii.reserved1);
+ pr_debug(" cmd valid: %s\n", mii.cmdErr ? "no" : "yes");
+ pr_debug(" cmd: 0x%x\n", mii.cmd);
+ pr_debug(" reserved: 0x%x\n", mii.reserved2);
+ pr_debug(" PHY addr: 0x%x\n", mii.phyAddr);
+ pr_debug(" reserved: 0x%x\n", mii.reserved3);
+ pr_debug(" PHY reg: 0x%x\n", mii.phyReg);
+ pr_debug(" reserved: 0x%x\n", mii.reserved4);
+ pr_debug(" PHY write: 0x%x\n", mii.phyWriteData);
+ pr_debug(" PHY read: 0x%x\n", mii.phyReadData);
+ pr_debug(" MAC addr: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ mii.macAddr.b[0], mii.macAddr.b[1], mii.macAddr.b[2],
+ mii.macAddr.b[3], mii.macAddr.b[4], mii.macAddr.b[5]);
+ pr_debug(" MAC filter enable: %s\n",
+ mii.macFilterEnabled ? "enabled" : "disabled");
+ pr_debug(" reserved: 0x%x\n", mii.reserved6);
+ pr_debug(" Link State: %s\n",
+ mii.linkStatus ? "link" : "no link");
+ pr_debug(" reserved: 0x%x\n", mii.reserved7);
+ //pr_debug(" reserved: 0x%x\n", DRV_NAME, mii.reserved8);
+ //TODO add leds, systemtime insertion and interrupts
+}
+
+void ccat_print_function_info(struct ccat_eth_priv *priv)
+{
+ print_CCatInfoBlock(&priv->info, priv->ccatdev->bar[0].ioaddr);
+ print_CCatMii(priv);
+ print_CCatDmaTxFifo(priv);
+ print_CCatDmaRxActBuf(priv);
+ print_CCatMacRegs(priv);
+ pr_debug(" RX window: %p\n", priv->reg.rx_mem);
+ pr_debug(" TX memory: %p\n", priv->reg.tx_mem);
+ pr_debug(" misc: %p\n", priv->reg.misc);
+}
+
+void print_update_info(const CCatInfoBlock * const info,
+ void __iomem * const ioaddr)
+{
+ const size_t index = min((int)info->eCCatInfoType, CCATINFO_MAX);
+ pr_debug("%s\n", CCatFunctionTypes[index]);
+ pr_debug(" revision: 0x%x\n", info->nRevision);
+ pr_debug(" baseaddr: 0x%x\n", info->nAddr);
+ pr_debug(" size: 0x%x\n", info->nSize);
+ pr_debug(" PROM ID is: 0x%x\n", ccat_get_prom_id(ioaddr));
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/print.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,30 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _PRINT_H_
+#define _PRINT_H_
+
+#include "update.h"
+
+extern void ccat_print_function_info(struct ccat_eth_priv *priv);
+extern void print_mem(const unsigned char *p, size_t lines);
+extern void print_update_info(const CCatInfoBlock * const info,
+ void __iomem * const ioaddr);
+#endif /* #ifndef _PRINT_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/update.c Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,458 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include "compat.h"
+#include "module.h"
+#include "print.h"
+#include "update.h"
+
+#define CCAT_DATA_IN_4 0x038
+#define CCAT_DATA_IN_N 0x7F0
+#define CCAT_DATA_OUT_4 0x030
+#define CCAT_DATA_BLOCK_SIZE (size_t)((CCAT_DATA_IN_N - CCAT_DATA_IN_4)/8)
+#define CCAT_WRITE_BLOCK_SIZE 128
+#define CCAT_FLASH_SIZE (size_t)0xE0000
+
+/** FUNCTION_NAME CMD, CLOCKS */
+#define CCAT_BULK_ERASE 0xE3, 8
+#define CCAT_GET_PROM_ID 0xD5, 40
+#define CCAT_READ_FLASH 0xC0, 32
+#define CCAT_READ_STATUS 0xA0, 16
+#define CCAT_WRITE_ENABLE 0x60, 8
+#define CCAT_WRITE_FLASH 0x40, 32
+
+/* from http://graphics.stanford.edu/~seander/bithacks.html#ReverseByteWith32Bits */
+#define SWAP_BITS(B) \
+ ((((B) * 0x0802LU & 0x22110LU) | ((B) * 0x8020LU & 0x88440LU)) * 0x10101LU >> 16)
+
+/**
+ * struct update_buffer - keep track of a CCAT FPGA update
+ * @update: pointer to a valid ccat_update object
+ * @data: buffer used for write operations
+ * @size: number of bytes written to the data buffer, if 0 on ccat_update_release() no data will be written to FPGA
+ */
+struct update_buffer {
+ struct ccat_update *update;
+ char data[CCAT_FLASH_SIZE];
+ size_t size;
+};
+
+static void ccat_wait_status_cleared(void __iomem * const ioaddr);
+static int ccat_read_flash(void __iomem * const ioaddr, char __user * buf,
+ uint32_t len, loff_t * off);
+static void ccat_write_flash(const struct update_buffer *const buf);
+static void ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd,
+ uint16_t clocks);
+static void ccat_update_destroy(struct kref *ref);
+
+/**
+ * wait_until_busy_reset() - wait until the busy flag was reset
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ */
+static inline void wait_until_busy_reset(void __iomem * const ioaddr)
+{
+ wmb();
+ while (ioread8(ioaddr + 1)) {
+ schedule();
+ }
+}
+
+static int ccat_update_open(struct inode *const i, struct file *const f)
+{
+ struct ccat_update *update =
+ container_of(i->i_cdev, struct ccat_update, cdev);
+ struct update_buffer *buf;
+ kref_get(&update->refcount);
+ if (atomic_read(&update->refcount.refcount) > 2) {
+ kref_put(&update->refcount, ccat_update_destroy);
+ return -EBUSY;
+ }
+
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf) {
+ kref_put(&update->refcount, ccat_update_destroy);
+ return -ENOMEM;
+ }
+
+ buf->update = update;
+ f->private_data = buf;
+ return 0;
+}
+
+static int ccat_update_release(struct inode *const i, struct file *const f)
+{
+ const struct update_buffer *const buf = f->private_data;
+ struct ccat_update *const update = buf->update;
+ if (buf->size > 0) {
+ ccat_update_cmd(update->ioaddr, CCAT_WRITE_ENABLE);
+ ccat_update_cmd(update->ioaddr, CCAT_BULK_ERASE);
+ ccat_wait_status_cleared(update->ioaddr);
+ ccat_write_flash(buf);
+ }
+ kfree(f->private_data);
+ kref_put(&update->refcount, ccat_update_destroy);
+ return 0;
+}
+
+/**
+ * ccat_update_read() - Read CCAT configuration data from flash
+ * @f: file handle previously initialized with ccat_update_open()
+ * @buf: buffer in user space provided for our data
+ * @len: length of the user space buffer
+ * @off: current offset of our file operation
+ *
+ * Copies data from the CCAT FPGA's configuration flash to user space.
+ * Note that the size of the FPGA's firmware is not known exactly so it
+ * is very possible that the overall buffer ends with a lot of 0xff.
+ *
+ * Return: the number of bytes written, or 0 if EOF reached
+ */
+static ssize_t ccat_update_read(struct file *const f, char __user * buf,
+ size_t len, loff_t * off)
+{
+ struct update_buffer *update = f->private_data;
+ if (!buf || !off) {
+ return -EINVAL;
+ }
+ if (*off >= CCAT_FLASH_SIZE) {
+ return 0;
+ }
+ if (*off + len >= CCAT_FLASH_SIZE) {
+ len = CCAT_FLASH_SIZE - *off;
+ }
+ return ccat_read_flash(update->update->ioaddr, buf, len, off);
+}
+
+/**
+ * ccat_update_write() - Write data to the CCAT FPGA's configuration flash
+ * @f: file handle previously initialized with ccat_update_open()
+ * @buf: buffer in user space providing the new configuration data (from *.rbf)
+ * @len: length of the user space buffer
+ * @off: current offset in the configuration data
+ *
+ * Copies data from user space (possibly a *.rbf) to the CCAT FPGA's
+ * configuration flash to user space.
+ *
+ * Return: the number of bytes written, or 0 if flash end is reached
+ */
+
+static ssize_t ccat_update_write(struct file *const f, const char __user * buf,
+ size_t len, loff_t * off)
+{
+ struct update_buffer *const update = f->private_data;
+ if (*off + len > sizeof(update->data))
+ return 0;
+
+ copy_from_user(update->data + *off, buf, len);
+ *off += len;
+ update->size = *off;
+ return len;
+}
+
+static struct file_operations update_ops = {
+ .owner = THIS_MODULE,
+ .open = ccat_update_open,
+ .release = ccat_update_release,
+ .read = ccat_update_read,
+ .write = ccat_update_write,
+};
+
+/**
+ * __ccat_update_cmd() - Helper to issue a FPGA flash command
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @cmd: the command identifier
+ * @clocks: the number of clocks associated with the specified command
+ *
+ * no write memory barrier is called and the busy flag is not evaluated
+ */
+static inline void __ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd,
+ uint16_t clocks)
+{
+ iowrite8((0xff00 & clocks) >> 8, ioaddr);
+ iowrite8(0x00ff & clocks, ioaddr + 0x8);
+ iowrite8(cmd, ioaddr + 0x10);
+}
+
+/**
+ * ccat_update_cmd() - Helper to issue a FPGA flash command
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @cmd: the command identifier
+ * @clocks: the number of clocks associated with the specified command
+ *
+ * Triggers a full flash command cycle with write memory barrier and
+ * command activate. This call blocks until the busy flag is reset.
+ */
+static inline void ccat_update_cmd(void __iomem * const ioaddr, uint8_t cmd,
+ uint16_t clocks)
+{
+ __ccat_update_cmd(ioaddr, cmd, clocks);
+ wmb();
+ iowrite8(0xff, ioaddr + 0x7f8);
+ wait_until_busy_reset(ioaddr);
+}
+
+/**
+ * ccat_update_cmd_addr() - Helper to issue a FPGA flash command with address parameter
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @cmd: the command identifier
+ * @clocks: the number of clocks associated with the specified command
+ * @addr: 24 bit address associated with the specified command
+ *
+ * Triggers a full flash command cycle with write memory barrier and
+ * command activate. This call blocks until the busy flag is reset.
+ */
+static inline void ccat_update_cmd_addr(void __iomem * const ioaddr,
+ uint8_t cmd, uint16_t clocks,
+ uint32_t addr)
+{
+ const uint8_t addr_0 = SWAP_BITS(addr & 0xff);
+ const uint8_t addr_1 = SWAP_BITS((addr & 0xff00) >> 8);
+ const uint8_t addr_2 = SWAP_BITS((addr & 0xff0000) >> 16);
+ __ccat_update_cmd(ioaddr, cmd, clocks);
+ iowrite8(addr_2, ioaddr + 0x18);
+ iowrite8(addr_1, ioaddr + 0x20);
+ iowrite8(addr_0, ioaddr + 0x28);
+ wmb();
+ iowrite8(0xff, ioaddr + 0x7f8);
+ wait_until_busy_reset(ioaddr);
+}
+
+/**
+ * ccat_get_prom_id() - Read CCAT PROM ID
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ *
+ * Return: the CCAT FPGA's PROM identifier
+ */
+uint8_t ccat_get_prom_id(void __iomem * const ioaddr)
+{
+ ccat_update_cmd(ioaddr, CCAT_GET_PROM_ID);
+ return ioread8(ioaddr + 0x38);
+}
+
+/**
+ * ccat_get_status() - Read CCAT Update status
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ *
+ * Return: the current status of the CCAT Update function
+ */
+static uint8_t ccat_get_status(void __iomem * const ioaddr)
+{
+ ccat_update_cmd(ioaddr, CCAT_READ_STATUS);
+ return ioread8(ioaddr + 0x20);
+}
+
+/**
+ * ccat_wait_status_cleared() - wait until CCAT status is cleared
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ *
+ * Blocks until bit 7 of the CCAT Update status is reset
+ */
+
+static void ccat_wait_status_cleared(void __iomem * const ioaddr)
+{
+ uint8_t status;
+ do {
+ status = ccat_get_status(ioaddr);
+ } while (status & (1 << 7));
+}
+
+/**
+ * ccat_read_flash_block() - Read a block of CCAT configuration data from flash
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @addr: 24 bit address of the block to read
+ * @len: number of bytes to read from this block, len <= CCAT_DATA_BLOCK_SIZE
+ * @buf: output buffer in user space
+ *
+ * Copies one block of configuration data from the CCAT FPGA's flash to
+ * the user space buffer.
+ * Note that the size of the FPGA's firmware is not known exactly so it
+ * is very possible that the overall buffer ends with a lot of 0xff.
+ *
+ * Return: the number of bytes copied
+ */
+static int ccat_read_flash_block(void __iomem * const ioaddr,
+ const uint32_t addr, const uint16_t len,
+ char __user * const buf)
+{
+ uint16_t i;
+ const uint16_t clocks = 8 * len;
+ ccat_update_cmd_addr(ioaddr, CCAT_READ_FLASH + clocks, addr);
+ for (i = 0; i < len; i++) {
+ put_user(ioread8(ioaddr + CCAT_DATA_IN_4 + 8 * i), buf + i);
+ }
+ return len;
+}
+
+/**
+ * ccat_read_flash() - Read a chunk of CCAT configuration data from flash
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @buf: output buffer in user space
+ * @len: number of bytes to read
+ * @off: offset in the configuration data
+ *
+ * Copies multiple blocks of configuration data from the CCAT FPGA's
+ * flash to the user space buffer.
+ *
+ * Return: the number of bytes copied
+ */
+static int ccat_read_flash(void __iomem * const ioaddr, char __user * buf,
+ uint32_t len, loff_t * off)
+{
+ const loff_t start = *off;
+ while (len > CCAT_DATA_BLOCK_SIZE) {
+ *off +=
+ ccat_read_flash_block(ioaddr, *off, CCAT_DATA_BLOCK_SIZE,
+ buf);
+ buf += CCAT_DATA_BLOCK_SIZE;
+ len -= CCAT_DATA_BLOCK_SIZE;
+ }
+ *off += ccat_read_flash_block(ioaddr, *off, len, buf);
+ return *off - start;
+}
+
+/**
+ * ccat_write_flash_block() - Write a block of CCAT configuration data to flash
+ * @ioaddr: address of the CCAT Update function in PCI config space
+ * @addr: 24 bit start address in the CCAT FPGA's flash
+ * @len: number of bytes to write in this block, len <= CCAT_WRITE_BLOCK_SIZE
+ * @buf: input buffer
+ *
+ * Copies one block of configuration data to the CCAT FPGA's flash
+ *
+ * Return: the number of bytes copied
+ */
+static int ccat_write_flash_block(void __iomem * const ioaddr,
+ const uint32_t addr, const uint16_t len,
+ const char *const buf)
+{
+ const uint16_t clocks = 8 * len;
+ uint16_t i;
+ ccat_update_cmd(ioaddr, CCAT_WRITE_ENABLE);
+ for (i = 0; i < len; i++) {
+ iowrite8(buf[i], ioaddr + CCAT_DATA_OUT_4 + 8 * i);
+ }
+ ccat_update_cmd_addr(ioaddr, CCAT_WRITE_FLASH + clocks, addr);
+ ccat_wait_status_cleared(ioaddr);
+ return len;
+}
+
+/**
+ * ccat_write_flash() - Write a new CCAT configuration to FPGA's flash
+ * @update: a CCAT Update buffer containing the new FPGA configuration
+ */
+static void ccat_write_flash(const struct update_buffer *const update)
+{
+ const char *buf = update->data;
+ uint32_t off = 0;
+ size_t len = update->size;
+ while (len > CCAT_WRITE_BLOCK_SIZE) {
+ ccat_write_flash_block(update->update->ioaddr, off,
+ (uint16_t) CCAT_WRITE_BLOCK_SIZE, buf);
+ off += CCAT_WRITE_BLOCK_SIZE;
+ buf += CCAT_WRITE_BLOCK_SIZE;
+ len -= CCAT_WRITE_BLOCK_SIZE;
+ }
+ ccat_write_flash_block(update->update->ioaddr, off, (uint16_t) len,
+ buf);
+}
+
+/**
+ * ccat_update_init() - Initialize the CCAT Update function
+ */
+struct ccat_update *ccat_update_init(const struct ccat_device *const ccatdev,
+ void __iomem * const addr)
+{
+ struct ccat_update *const update = kzalloc(sizeof(*update), GFP_KERNEL);
+ if (!update) {
+ return NULL;
+ }
+ kref_init(&update->refcount);
+ update->ioaddr = ccatdev->bar[0].ioaddr + ioread32(addr + 0x8);
+ memcpy_fromio(&update->info, addr, sizeof(update->info));
+ print_update_info(&update->info, update->ioaddr);
+
+ if (0x00 != update->info.nRevision) {
+ pr_warn("CCAT Update rev. %d not supported\n",
+ update->info.nRevision);
+ goto cleanup;
+ }
+
+ if (alloc_chrdev_region(&update->dev, 0, 1, DRV_NAME)) {
+ pr_warn("alloc_chrdev_region() failed\n");
+ goto cleanup;
+ }
+
+ update->class = class_create(THIS_MODULE, "ccat_update");
+ if (NULL == update->class) {
+ pr_warn("Create device class failed\n");
+ goto cleanup;
+ }
+
+ if (NULL ==
+ device_create(update->class, NULL, update->dev, NULL,
+ "ccat_update")) {
+ pr_warn("device_create() failed\n");
+ goto cleanup;
+ }
+
+ cdev_init(&update->cdev, &update_ops);
+ update->cdev.owner = THIS_MODULE;
+ update->cdev.ops = &update_ops;
+ if (cdev_add(&update->cdev, update->dev, 1)) {
+ pr_warn("add update device failed\n");
+ goto cleanup;
+ }
+ return update;
+cleanup:
+ kref_put(&update->refcount, ccat_update_destroy);
+ return NULL;
+}
+
+/**
+ * ccat_update_destroy() - Cleanup the CCAT Update function
+ * @ref: pointer to a struct kref embedded into a struct ccat_update, which we intend to destroy
+ *
+ * Retrieves the parent struct ccat_update and destroys it.
+ */
+static void ccat_update_destroy(struct kref *ref)
+{
+ struct ccat_update *update =
+ container_of(ref, struct ccat_update, refcount);
+ cdev_del(&update->cdev);
+ device_destroy(update->class, update->dev);
+ class_destroy(update->class);
+ unregister_chrdev_region(update->dev, 1);
+ kfree(update);
+ pr_debug("%s(): done\n", __FUNCTION__);
+}
+
+/**
+ * ccat_update_remove() - Prepare the CCAT Update function for removal
+ */
+void ccat_update_remove(struct ccat_update *update)
+{
+ kref_put(&update->refcount, ccat_update_destroy);
+ pr_debug("%s(): done\n", __FUNCTION__);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/update.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,27 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _UPDATE_H_
+#define _UPDATE_H_
+extern uint8_t ccat_get_prom_id(void __iomem * const ioaddr);
+extern struct ccat_update *ccat_update_init(const struct ccat_device *ccatdev,
+ void __iomem * addr);
+extern void ccat_update_remove(struct ccat_update *update);
+#endif /* #ifndef _UPDATE_H_ */
--- a/examples/user/main.c Mon Mar 10 13:43:48 2014 +0100
+++ b/examples/user/main.c Fri Apr 25 16:42:36 2014 +0200
@@ -44,11 +44,7 @@
// Application parameters
#define FREQUENCY 100
-#define PRIORITY 1
-
-// Optional features
-#define CONFIGURE_PDOS 1
-#define SDO_ACCESS 0
+#define PRIORITY 0
/****************************************************************************/
@@ -71,107 +67,82 @@
// process data
static uint8_t *domain1_pd = NULL;
-#define BusCouplerPos 0, 0
-#define DigOutSlavePos 0, 2
-#define AnaInSlavePos 0, 3
-#define AnaOutSlavePos 0, 4
-
-#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define BusCouplerPos 0, 3
+#define DigOutSlavePos 0, 0
+
+//#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define Beckhoff_EK1100 0x00000002, 0x04562c52
+#define Beckhoff_EL1008 0x00000002, 0x03f03052
#define Beckhoff_EL2004 0x00000002, 0x07d43052
+#define Beckhoff_EL2008 0x00000002, 0x07d83052
#define Beckhoff_EL2032 0x00000002, 0x07f03052
#define Beckhoff_EL3152 0x00000002, 0x0c503052
#define Beckhoff_EL3102 0x00000002, 0x0c1e3052
#define Beckhoff_EL4102 0x00000002, 0x10063052
// offsets for PDO entries
-static unsigned int off_ana_in_status;
-static unsigned int off_ana_in_value;
-static unsigned int off_ana_out;
-static unsigned int off_dig_out;
-
-const static ec_pdo_entry_reg_t domain1_regs[] = {
- {AnaInSlavePos, Beckhoff_EL3102, 0x3101, 1, &off_ana_in_status},
- {AnaInSlavePos, Beckhoff_EL3102, 0x3101, 2, &off_ana_in_value},
- {AnaOutSlavePos, Beckhoff_EL4102, 0x3001, 1, &off_ana_out},
- {DigOutSlavePos, Beckhoff_EL2032, 0x3001, 1, &off_dig_out},
- {}
-};
-
-static unsigned int counter = 0;
-static unsigned int blink = 0;
+static unsigned int off_dig_in[1];
+static unsigned int off_dig_out[2];
+
/*****************************************************************************/
-
-#if CONFIGURE_PDOS
-
-// Analog in --------------------------
-
-static ec_pdo_entry_info_t el3102_pdo_entries[] = {
- {0x3101, 1, 8}, // channel 1 status
- {0x3101, 2, 16}, // channel 1 value
- {0x3102, 1, 8}, // channel 2 status
- {0x3102, 2, 16}, // channel 2 value
- {0x6401, 1, 16}, // channel 1 value (alt.)
- {0x6401, 2, 16} // channel 2 value (alt.)
-};
-
-static ec_pdo_info_t el3102_pdos[] = {
- {0x1A00, 2, el3102_pdo_entries},
- {0x1A01, 2, el3102_pdo_entries + 2}
-};
-
-static ec_sync_info_t el3102_syncs[] = {
+// Digital in ------------------------
+static ec_pdo_entry_info_t el1008_channels[] = {
+ {0x6000, 1, 1},
+ {0x6010, 1, 1},
+ {0x6020, 1, 1},
+ {0x6030, 1, 1},
+ {0x6040, 1, 1},
+ {0x6050, 1, 1},
+ {0x6060, 1, 1},
+ {0x6070, 1, 1},
+};
+
+static ec_pdo_info_t el1008_pdos[] = {
+ {0x1a00, 1, &el1008_channels[0]},
+ {0x1a01, 1, &el1008_channels[1]},
+ {0x1a02, 1, &el1008_channels[2]},
+ {0x1a03, 1, &el1008_channels[3]},
+ {0x1a04, 1, &el1008_channels[4]},
+ {0x1a05, 1, &el1008_channels[5]},
+ {0x1a06, 1, &el1008_channels[6]},
+ {0x1a07, 1, &el1008_channels[7]}
+};
+
+static ec_sync_info_t el1008_syncs[] = {
{2, EC_DIR_OUTPUT},
- {3, EC_DIR_INPUT, 2, el3102_pdos},
+ {3, EC_DIR_INPUT, 8, el1008_pdos},
{0xff}
};
-// Analog out -------------------------
-
-static ec_pdo_entry_info_t el4102_pdo_entries[] = {
- {0x3001, 1, 16}, // channel 1 value
- {0x3002, 1, 16}, // channel 2 value
-};
-
-static ec_pdo_info_t el4102_pdos[] = {
- {0x1600, 1, el4102_pdo_entries},
- {0x1601, 1, el4102_pdo_entries + 1}
-};
-
-static ec_sync_info_t el4102_syncs[] = {
- {2, EC_DIR_OUTPUT, 2, el4102_pdos},
- {3, EC_DIR_INPUT},
- {0xff}
-};
-
// Digital out ------------------------
-
-static ec_pdo_entry_info_t el2004_channels[] = {
- {0x3001, 1, 1}, // Value 1
- {0x3001, 2, 1}, // Value 2
- {0x3001, 3, 1}, // Value 3
- {0x3001, 4, 1} // Value 4
-};
-
-static ec_pdo_info_t el2004_pdos[] = {
- {0x1600, 1, &el2004_channels[0]},
- {0x1601, 1, &el2004_channels[1]},
- {0x1602, 1, &el2004_channels[2]},
- {0x1603, 1, &el2004_channels[3]}
-};
-
-static ec_sync_info_t el2004_syncs[] = {
- {0, EC_DIR_OUTPUT, 4, el2004_pdos},
+static ec_pdo_entry_info_t el2008_channels[] = {
+ {0x7000, 1, 1},
+ {0x7010, 1, 1},
+ {0x7020, 1, 1},
+ {0x7030, 1, 1},
+ {0x7040, 1, 1},
+ {0x7050, 1, 1},
+ {0x7060, 1, 1},
+ {0x7070, 1, 1},
+};
+
+static ec_pdo_info_t el2008_pdos[] = {
+ {0x1600, 1, &el2008_channels[0]},
+ {0x1601, 1, &el2008_channels[1]},
+ {0x1602, 1, &el2008_channels[2]},
+ {0x1603, 1, &el2008_channels[3]},
+ {0x1604, 1, &el2008_channels[4]},
+ {0x1605, 1, &el2008_channels[5]},
+ {0x1606, 1, &el2008_channels[6]},
+ {0x1607, 1, &el2008_channels[7]}
+};
+
+static ec_sync_info_t el2008_syncs[] = {
+ {0, EC_DIR_OUTPUT, 8, el2008_pdos},
{1, EC_DIR_INPUT},
{0xff}
};
-#endif
-
-/*****************************************************************************/
-
-#if SDO_ACCESS
-static ec_sdo_request_t *sdo;
-#endif
/*****************************************************************************/
@@ -226,74 +197,59 @@
sc_ana_in_state = s;
}
-/*****************************************************************************/
-
-#if SDO_ACCESS
-void read_sdo(void)
-{
- switch (ecrt_sdo_request_state(sdo)) {
- case EC_REQUEST_UNUSED: // request was not used yet
- ecrt_sdo_request_read(sdo); // trigger first read
- break;
- case EC_REQUEST_BUSY:
- fprintf(stderr, "Still busy...\n");
- break;
- case EC_REQUEST_SUCCESS:
- fprintf(stderr, "SDO value: 0x%04X\n",
- EC_READ_U16(ecrt_sdo_request_data(sdo)));
- ecrt_sdo_request_read(sdo); // trigger next read
- break;
- case EC_REQUEST_ERROR:
- fprintf(stderr, "Failed to read SDO!\n");
- ecrt_sdo_request_read(sdo); // retry reading
- break;
- }
-}
-#endif
-
/****************************************************************************/
void cyclic_task()
{
+ static unsigned int counter = 10;
+ static uint8_t outputValue = 0;
+ static int numAsyncCycles = 0;
+ uint8_t inputValue = 0;
+ static uint8_t error = 0;
+
// receive process data
ecrt_master_receive(master);
ecrt_domain_process(domain1);
// check process data state (optional)
check_domain1_state();
-
+
+
+ inputValue = EC_READ_U8(domain1_pd + off_dig_in[0]);
+
+ if(inputValue != outputValue) {
+ numAsyncCycles++;
+ } else {
+ numAsyncCycles = 0;
+ }
+
+ if(numAsyncCycles > 2) {
+ if(error != 0xff) {
+ error++;
+ }
+ }
+
+
if (counter) {
counter--;
- } else { // do this at 1 Hz
- counter = FREQUENCY;
+ } else {
+ counter = 5; //update delay
+
+
// calculate new process data
- blink = !blink;
+ outputValue++;
// check for master state (optional)
check_master_state();
// check for islave configuration state(s) (optional)
check_slave_config_states();
-
-#if SDO_ACCESS
- // read process data SDO
- read_sdo();
-#endif
-
- }
-
-#if 0
- // read process data
- printf("AnaIn: state %u value %u\n",
- EC_READ_U8(domain1_pd + off_ana_in_status),
- EC_READ_U16(domain1_pd + off_ana_in_value));
-#endif
-
-#if 1
+ }
+
// write process data
- EC_WRITE_U8(domain1_pd + off_dig_out, blink ? 0x06 : 0x09);
-#endif
+ EC_WRITE_U8(domain1_pd + off_dig_out[1], outputValue);
+ EC_WRITE_U8(domain1_pd + off_dig_out[0], error);
// send process data
ecrt_domain_queue(domain1);
@@ -312,11 +268,31 @@
/****************************************************************************/
+int Init_EL2008(uint16_t position)
+{
+ ec_slave_config_t *sc;
+ if (!(sc = ecrt_master_slave_config(master, 0, position, Beckhoff_EL2008))) {
+ fprintf(stderr, "Failed to get EL2008 configuration #%u.\n", position);
+ return -1;
+ }
+ if (ecrt_slave_config_pdos(sc, EC_END, el2008_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs #%u.\n", position);
+ return -1;
+ }
+ if (0 > (off_dig_out[position] = ecrt_slave_config_reg_pdo_entry(sc, 0x7000, 1, domain1, NULL))) {
+ fprintf(stderr, "Failed to configure reg PDOs #%u.\n", position);
+ return -1;
+ }
+ fprintf(stderr, "EL2008 #%u configured offset: %d.\n", position, off_dig_out[position]);
+ return 0;
+}
+
int main(int argc, char **argv)
{
ec_slave_config_t *sc;
struct sigaction sa;
struct itimerval tv;
+ uint16_t i;
master = ecrt_request_master(0);
if (!master)
@@ -326,60 +302,33 @@
if (!domain1)
return -1;
- if (!(sc_ana_in = ecrt_master_slave_config(
- master, AnaInSlavePos, Beckhoff_EL3102))) {
- fprintf(stderr, "Failed to get slave configuration.\n");
- return -1;
- }
-
-#if SDO_ACCESS
- fprintf(stderr, "Creating SDO requests...\n");
- if (!(sdo = ecrt_slave_config_create_sdo_request(sc_ana_in, 0x3102, 2, 2))) {
- fprintf(stderr, "Failed to create SDO request.\n");
- return -1;
- }
- ecrt_sdo_request_timeout(sdo, 500); // ms
-#endif
-
-#if CONFIGURE_PDOS
printf("Configuring PDOs...\n");
- if (ecrt_slave_config_pdos(sc_ana_in, EC_END, el3102_syncs)) {
+ if (!(sc_ana_in = ecrt_master_slave_config(master, 0, 2, Beckhoff_EL1008))) {
+ fprintf(stderr, "Failed to get digital in configuration.\n");
+ return -1;
+ }
+ if (ecrt_slave_config_pdos(sc_ana_in, EC_END, el1008_syncs)) {
fprintf(stderr, "Failed to configure PDOs.\n");
return -1;
}
-
- if (!(sc = ecrt_master_slave_config(
- master, AnaOutSlavePos, Beckhoff_EL4102))) {
- fprintf(stderr, "Failed to get slave configuration.\n");
- return -1;
- }
-
- if (ecrt_slave_config_pdos(sc, EC_END, el4102_syncs)) {
- fprintf(stderr, "Failed to configure PDOs.\n");
- return -1;
- }
-
- if (!(sc = ecrt_master_slave_config(
- master, DigOutSlavePos, Beckhoff_EL2032))) {
- fprintf(stderr, "Failed to get slave configuration.\n");
- return -1;
- }
-
- if (ecrt_slave_config_pdos(sc, EC_END, el2004_syncs)) {
- fprintf(stderr, "Failed to configure PDOs.\n");
- return -1;
- }
-#endif
+ if (0 > (off_dig_in[0] = ecrt_slave_config_reg_pdo_entry(sc_ana_in, 0x6000, 1, domain1, NULL))) {
+ fprintf(stderr, "Failed to configure reg PDOs.\n");
+ return -1;
+ }
+ printf("EL1008 configured.\n");
+
+ for(i = 0; i < 2; ++i) {
+ if(Init_EL2008(i)) {
+ fprintf(stderr, "Failed to initialize EL2008 #%u.\n", i);
+ return -1;
+ }
+ }
// Create configuration for bus coupler
sc = ecrt_master_slave_config(master, BusCouplerPos, Beckhoff_EK1100);
if (!sc)
return -1;
-
- if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) {
- fprintf(stderr, "PDO entry registration failed!\n");
- return -1;
- }
+ fprintf(stderr, "EK1100 configured.\n");
printf("Activating master...\n");
if (ecrt_master_activate(master))