--- a/.hgignore Fri Dec 18 12:30:45 2015 +0100
+++ b/.hgignore Tue Feb 16 15:18:34 2016 +0100
@@ -111,6 +111,7 @@
examples/user/Makefile.in
examples/user/TAGS
examples/user/ec_user_example
+examples/user_ccat/
examples/xenomai/.libs
examples/xenomai/ec_xenomai_example
examples/xenomai_posix/.libs
--- a/devices/ccat/Kbuild.in Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/Kbuild.in Tue Feb 16 15:18:34 2016 +0100
@@ -35,8 +35,10 @@
ifeq (@ENABLE_CCAT@,1)
EC_CCAT_OBJ := \
+ gpio.o \
module.o \
netdev.o \
+ sram.o \
update.o
obj-m += ec_ccat.o
ec_ccat-objs := $(EC_CCAT_OBJ)
--- a/devices/ccat/Makefile.am Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/Makefile.am Tue Feb 16 15:18:34 2016 +0100
@@ -29,8 +29,10 @@
EXTRA_DIST = \
Kbuild.in \
+ gpio.h \
module.h \
netdev.h \
+ sram.h \
update.h
BUILT_SOURCES = \
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/gpio.c Tue Feb 16 15:18:34 2016 +0100
@@ -0,0 +1,164 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/version.h>
+#include "module.h"
+
+/**
+ * struct ccat_gpio - CCAT GPIO function
+ * @ioaddr: PCI base address of the CCAT Update function
+ * @info: holds a copy of the CCAT Update function information block (read from PCI config space)
+ */
+struct ccat_gpio {
+ struct gpio_chip chip;
+ void __iomem *ioaddr;
+ struct mutex lock;
+};
+
+/** TODO implement in LED driver
+ #define TC_RED 0x01
+ #define TC_GREEN 0x02
+ #define TC_BLUE 0x04
+ #define FB1_RED 0x08
+ #define FB1_GREEN 0x10
+ #define FB1_BLUE 0x20
+ #define FB2_RED 0x40
+ #define FB2_GREEN 0x80
+ #define FB2_BLUE 0x100
+ */
+
+static int set_bit_in_register(struct mutex *lock, void __iomem * ioaddr,
+ unsigned nr, int val)
+{
+ volatile unsigned long old;
+
+ mutex_lock(lock);
+ old = ioread32(ioaddr);
+ val ? set_bit(nr, &old) : clear_bit(nr, &old);
+ if (val)
+ set_bit(nr, &old);
+ else
+ clear_bit(nr, &old);
+ iowrite32(old, ioaddr);
+ mutex_unlock(lock);
+ return 0;
+}
+
+static int ccat_gpio_get_direction(struct gpio_chip *chip, unsigned nr)
+{
+ struct ccat_gpio *gdev = container_of(chip, struct ccat_gpio, chip);
+ const size_t byte_offset = 4 * (nr / 32) + 0x8;
+ const u32 mask = 1 << (nr % 32);
+
+ return !(mask & ioread32(gdev->ioaddr + byte_offset));
+}
+
+static int ccat_gpio_direction_input(struct gpio_chip *chip, unsigned nr)
+{
+ struct ccat_gpio *gdev = container_of(chip, struct ccat_gpio, chip);
+
+ return set_bit_in_register(&gdev->lock, gdev->ioaddr + 0x8, nr, 0);
+}
+
+static int ccat_gpio_direction_output(struct gpio_chip *chip, unsigned nr,
+ int val)
+{
+ struct ccat_gpio *gdev = container_of(chip, struct ccat_gpio, chip);
+
+ return set_bit_in_register(&gdev->lock, gdev->ioaddr + 0x8, nr, 1);
+}
+
+static int ccat_gpio_get(struct gpio_chip *chip, unsigned nr)
+{
+ struct ccat_gpio *gdev = container_of(chip, struct ccat_gpio, chip);
+ const size_t byte_off = 4 * (nr / 32);
+ const int mask = 1 << (nr % 32);
+ int dir_off;
+ int value;
+
+ /** omit direction changes before value was read */
+ mutex_lock(&gdev->lock);
+ dir_off = 0x10 * ccat_gpio_get_direction(chip, nr);
+ value = !(mask & ioread32(gdev->ioaddr + byte_off + dir_off));
+ mutex_unlock(&gdev->lock);
+ return value;
+}
+
+static void ccat_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
+{
+ struct ccat_gpio *gdev = container_of(chip, struct ccat_gpio, chip);
+
+ set_bit_in_register(&gdev->lock, gdev->ioaddr, nr, val);
+}
+
+static const struct gpio_chip ccat_gpio_chip = {
+ .label = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,12,0))
+ .get_direction = ccat_gpio_get_direction,
+#endif
+ .direction_input = ccat_gpio_direction_input,
+ .get = ccat_gpio_get,
+ .direction_output = ccat_gpio_direction_output,
+ .set = ccat_gpio_set,
+ .dbg_show = NULL,
+ .base = -1,
+ .can_sleep = false
+};
+
+static int ccat_gpio_probe(struct ccat_function *func)
+{
+ struct ccat_gpio *const gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
+ int ret;
+
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->ioaddr = func->ccat->bar_0 + func->info.addr;
+ memcpy(&gpio->chip, &ccat_gpio_chip, sizeof(gpio->chip));
+ gpio->chip.ngpio = func->info.num_gpios;
+ mutex_init(&gpio->lock);
+
+ ret = gpiochip_add(&gpio->chip);
+ if (ret) {
+ kfree(gpio);
+ return ret;
+ }
+ pr_info("registered %s as gpiochip%d with #%d GPIOs.\n",
+ gpio->chip.label, gpio->chip.base, gpio->chip.ngpio);
+ func->private_data = gpio;
+ return 0;
+}
+
+static void ccat_gpio_remove(struct ccat_function *func)
+{
+ struct ccat_gpio *const gpio = func->private_data;
+
+ gpiochip_remove(&gpio->chip);
+};
+
+const struct ccat_driver gpio_driver = {
+ .type = CCATINFO_GPIO,
+ .probe = ccat_gpio_probe,
+ .remove = ccat_gpio_remove,
+};
--- a/devices/ccat/module.c Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/module.c Tue Feb 16 15:18:34 2016 +0100
@@ -1,6 +1,6 @@
/**
Network Driver for Beckhoff CCAT communication controller
- Copyright (C) 2014 Beckhoff Automation GmbH
+ Copyright (C) 2014-2015 Beckhoff Automation GmbH
Author: Patrick Bruenn <p.bruenn@beckhoff.com>
This program is free software; you can redistribute it and/or modify
@@ -18,131 +18,195 @@
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <asm/dma.h>
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/platform_device.h>
#include <linux/version.h>
#include "module.h"
-#include "netdev.h"
-#include "update.h"
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR("Patrick Bruenn <p.bruenn@beckhoff.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-static void ccat_bar_free(struct ccat_bar *bar)
-{
- if (bar->ioaddr) {
- const struct ccat_bar tmp = *bar;
- memset(bar, 0, sizeof(*bar));
- iounmap(tmp.ioaddr);
- release_mem_region(tmp.start, tmp.len);
- } else {
- pr_warn("%s(): %p was already done.\n", __FUNCTION__, bar);
- }
-}
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,12,27))
+/*
+ * Set both the DMA mask and the coherent DMA mask to the same thing.
+ * Note that we don't check the return value from dma_set_coherent_mask()
+ * as the DMA API guarantees that the coherent DMA mask can be set to
+ * the same or smaller than the streaming DMA mask.
+ */
+static inline int dma_set_mask_and_coherent(struct device *dev, u64 mask)
+{
+ int rc = dma_set_mask(dev, mask);
+ if (rc == 0)
+ dma_set_coherent_mask(dev, mask);
+ return rc;
+}
+#endif
/**
- * ccat_bar_init() - Initialize a CCAT pci bar
- * @bar object which should be initialized
- * @index 0 and 2 are valid for CCAT, meaning pci bar0 or pci bar2
- * @pdev the pci device as which the CCAT was recognized before
- *
- * Reading PCI config space; request and map memory region.
+ * configure the drivers capabilities here
*/
-static int ccat_bar_init(struct ccat_bar *bar, size_t index,
- struct pci_dev *pdev)
-{
- struct resource *res;
-
- bar->start = pci_resource_start(pdev, index);
- bar->end = pci_resource_end(pdev, index);
- bar->len = pci_resource_len(pdev, index);
- bar->flags = pci_resource_flags(pdev, index);
- if (!(IORESOURCE_MEM & bar->flags)) {
- pr_info("bar%llu is no mem_region -> abort.\n", (u64) index);
- return -EIO;
- }
-
- res = request_mem_region(bar->start, bar->len, KBUILD_MODNAME);
- if (!res) {
- pr_info("allocate mem_region failed.\n");
- return -EIO;
- }
- pr_debug("bar%llu at [%lx,%lx] len=%lu res: %p.\n", (u64) index,
- bar->start, bar->end, bar->len, res);
-
- bar->ioaddr = ioremap(bar->start, bar->len);
- if (!bar->ioaddr) {
- pr_info("bar%llu ioremap failed.\n", (u64) index);
- release_mem_region(bar->start, bar->len);
- return -EIO;
- }
- pr_debug("bar%llu I/O mem mapped to %p.\n", (u64) index, bar->ioaddr);
- return 0;
-}
-
-void ccat_dma_free(struct ccat_dma *const dma)
-{
- const struct ccat_dma tmp = *dma;
-
- free_dma(dma->channel);
- memset(dma, 0, sizeof(*dma));
- dma_free_coherent(tmp.dev, tmp.size, tmp.virt, tmp.phys);
-}
-
-/**
- * ccat_dma_init() - Initialize CCAT and host memory for DMA transfer
- * @dma object for management data which will be initialized
- * @channel number of the DMA channel
- * @ioaddr of the pci bar2 configspace used to calculate the address of the pci dma configuration
- * @dev which should be configured for DMA
- */
-int ccat_dma_init(struct ccat_dma *const dma, size_t channel,
- void __iomem * const ioaddr, struct device *const dev)
-{
- void *frame;
- u64 addr;
- u32 translateAddr;
- u32 memTranslate;
- u32 memSize;
- u32 data = 0xffffffff;
- u32 offset = (sizeof(u64) * channel) + 0x1000;
-
- dma->channel = channel;
- dma->dev = dev;
-
- /* calculate size and alignments */
- iowrite32(data, ioaddr + offset);
- wmb();
- data = ioread32(ioaddr + offset);
- memTranslate = data & 0xfffffffc;
- memSize = (~memTranslate) + 1;
- dma->size = 2 * memSize - PAGE_SIZE;
- dma->virt = dma_zalloc_coherent(dev, dma->size, &dma->phys, GFP_KERNEL);
- if (!dma->virt || !dma->phys) {
- pr_info("init DMA%llu memory failed.\n", (u64) channel);
+static const struct ccat_driver *const drivers[] = {
+#ifdef CONFIG_PCI
+ ð_dma_driver, /* load Ethernet MAC/EtherCAT Master driver with DMA support from netdev.c */
+#endif
+ ð_eim_driver, /* load Ethernet MAC/EtherCAT Master driver without DMA support from */
+ &gpio_driver, /* load GPIO driver from gpio.c */
+ &sram_driver, /* load SRAM driver from sram.c */
+ &update_driver, /* load Update driver from update.c */
+};
+
+static int __init ccat_class_init(struct ccat_class *base)
+{
+ if (1 == atomic_inc_return(&base->instances)) {
+ if (alloc_chrdev_region
+ (&base->dev, 0, base->count, KBUILD_MODNAME)) {
+ pr_warn("alloc_chrdev_region() for '%s' failed\n",
+ base->name);
+ return -1;
+ }
+
+ base->class = class_create(THIS_MODULE, base->name);
+ if (!base->class) {
+ pr_warn("Create device class '%s' failed\n",
+ base->name);
+ unregister_chrdev_region(base->dev, base->count);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void ccat_class_exit(struct ccat_class *base)
+{
+ if (!atomic_dec_return(&base->instances)) {
+ class_destroy(base->class);
+ unregister_chrdev_region(base->dev, base->count);
+ }
+}
+
+static void free_ccat_cdev(struct ccat_cdev *ccdev)
+{
+ ccat_class_exit(ccdev->class);
+ ccdev->dev = 0;
+}
+
+static struct ccat_cdev *alloc_ccat_cdev(struct ccat_class *base)
+{
+ int i = 0;
+
+ ccat_class_init(base);
+ for (i = 0; i < base->count; ++i) {
+ if (base->devices[i].dev == 0) {
+ base->devices[i].dev = MKDEV(MAJOR(base->dev), i);
+ return &base->devices[i];
+ }
+ }
+ pr_warn("exceeding max. number of '%s' devices (%d)\n",
+ base->class->name, base->count);
+ atomic_dec_return(&base->instances);
+ return NULL;
+}
+
+static int ccat_cdev_init(struct cdev *cdev, dev_t dev, struct class *class,
+ struct file_operations *fops)
+{
+ if (!device_create
+ (class, NULL, dev, NULL, "%s%d", class->name, MINOR(dev))) {
+ pr_warn("device_create() failed\n");
return -1;
}
- if (request_dma(channel, KBUILD_MODNAME)) {
- pr_info("request dma channel %llu failed\n", (u64) channel);
- ccat_dma_free(dma);
+ cdev_init(cdev, fops);
+ cdev->owner = fops->owner;
+ if (cdev_add(cdev, dev, 1)) {
+ pr_warn("add update device failed\n");
+ device_destroy(class, dev);
return -1;
}
- translateAddr = (dma->phys + memSize - PAGE_SIZE) & memTranslate;
- addr = translateAddr;
- memcpy_toio(ioaddr + offset, &addr, sizeof(addr));
- frame = dma->virt + translateAddr - dma->phys;
- pr_debug
- ("DMA%llu mem initialized\n virt: 0x%p\n phys: 0x%llx\n translated: 0x%llx\n pci addr: 0x%08x%x\n memTranslate: 0x%x\n size: %llu bytes.\n",
- (u64) channel, dma->virt, (u64) (dma->phys), addr,
- ioread32(ioaddr + offset + 4), ioread32(ioaddr + offset),
- memTranslate, (u64) dma->size);
- return 0;
+ pr_info("registered %s%d.\n", class->name, MINOR(dev));
+ return 0;
+}
+
+int ccat_cdev_open(struct inode *const i, struct file *const f)
+{
+ struct ccat_cdev *ccdev =
+ container_of(i->i_cdev, struct ccat_cdev, cdev);
+ struct cdev_buffer *buf;
+
+ if (!atomic_dec_and_test(&ccdev->in_use)) {
+ atomic_inc(&ccdev->in_use);
+ return -EBUSY;
+ }
+
+ buf = kzalloc(sizeof(*buf) + ccdev->iosize, GFP_KERNEL);
+ if (!buf) {
+ atomic_inc(&ccdev->in_use);
+ return -ENOMEM;
+ }
+
+ buf->ccdev = ccdev;
+ f->private_data = buf;
+ return 0;
+}
+
+int ccat_cdev_probe(struct ccat_function *func, struct ccat_class *cdev_class,
+ size_t iosize)
+{
+ struct ccat_cdev *const ccdev = alloc_ccat_cdev(cdev_class);
+ if (!ccdev) {
+ return -ENOMEM;
+ }
+
+ ccdev->ioaddr = func->ccat->bar_0 + func->info.addr;
+ ccdev->iosize = iosize;
+ atomic_set(&ccdev->in_use, 1);
+
+ if (ccat_cdev_init
+ (&ccdev->cdev, ccdev->dev, cdev_class->class, &cdev_class->fops)) {
+ pr_warn("ccat_cdev_probe() failed\n");
+ free_ccat_cdev(ccdev);
+ return -1;
+ }
+ ccdev->class = cdev_class;
+ func->private_data = ccdev;
+ return 0;
+}
+
+int ccat_cdev_release(struct inode *const i, struct file *const f)
+{
+ const struct cdev_buffer *const buf = f->private_data;
+ struct ccat_cdev *const ccdev = buf->ccdev;
+
+ kfree(f->private_data);
+ atomic_inc(&ccdev->in_use);
+ return 0;
+}
+
+void ccat_cdev_remove(struct ccat_function *func)
+{
+ struct ccat_cdev *const ccdev = func->private_data;
+
+ cdev_del(&ccdev->cdev);
+ device_destroy(ccdev->class->class, ccdev->dev);
+ free_ccat_cdev(ccdev);
+}
+
+static const struct ccat_driver *ccat_function_connect(struct ccat_function
+ *const func)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(drivers); ++i) {
+ if (func->info.type == drivers[i]->type) {
+ return drivers[i]->probe(func) ? NULL : drivers[i];
+ }
+ }
+ return NULL;
}
/**
@@ -153,108 +217,100 @@
static int ccat_functions_init(struct ccat_device *const ccatdev)
{
static const size_t block_size = sizeof(struct ccat_info_block);
- void __iomem *addr = ccatdev->bar[0].ioaddr; /** first block is the CCAT information block entry */
+ struct ccat_function *next = kzalloc(sizeof(*next), GFP_KERNEL);
+ void __iomem *addr = ccatdev->bar_0; /** first block is the CCAT information block entry */
const u8 num_func = ioread8(addr + 4); /** number of CCAT function blocks is at offset 0x4 */
const void __iomem *end = addr + (block_size * num_func);
- int status = 0; /** count init function failures */
-
- while (addr < end) {
- const u8 type = ioread16(addr);
- switch (type) {
- case CCATINFO_NOTUSED:
- break;
- case CCATINFO_EPCS_PROM:
- pr_info("Found: CCAT update(EPCS_PROM) -> init()\n");
- ccatdev->update = ccat_update_init(ccatdev, addr);
- status += (NULL == ccatdev->update);
- break;
- case CCATINFO_ETHERCAT_MASTER_DMA:
- pr_info("Found: ETHERCAT_MASTER_DMA -> init()\n");
- ccatdev->ethdev = ccat_eth_init(ccatdev, addr);
- status += (NULL == ccatdev->ethdev);
- break;
- default:
- pr_info("Found: 0x%04x not supported\n", type);
- break;
- }
- addr += block_size;
- }
- return status;
+
+ INIT_LIST_HEAD(&ccatdev->functions);
+ for (; addr < end && next; addr += block_size) {
+ memcpy_fromio(&next->info, addr, sizeof(next->info));
+ if (CCATINFO_NOTUSED != next->info.type) {
+ next->ccat = ccatdev;
+ next->drv = ccat_function_connect(next);
+ if (next->drv) {
+ list_add(&next->list, &ccatdev->functions);
+ next = kzalloc(sizeof(*next), GFP_KERNEL);
+ }
+ }
+ }
+ kfree(next);
+ return list_empty(&ccatdev->functions);
}
/**
* Destroy all previously initialized CCAT functions
*/
-static void ccat_functions_remove(struct ccat_device *const ccatdev)
-{
- if (!ccatdev->ethdev) {
- pr_warn("%s(): 'ethdev' was not initialized.\n", __FUNCTION__);
- } else {
- struct ccat_eth_priv *const ethdev = ccatdev->ethdev;
- ccatdev->ethdev = NULL;
- ccat_eth_remove(ethdev);
- }
- if (!ccatdev->update) {
- pr_warn("%s(): 'update' was not initialized.\n", __FUNCTION__);
- } else {
- struct ccat_update *const update = ccatdev->update;
- ccatdev->update = NULL;
- ccat_update_remove(update);
- }
-}
-
-static int ccat_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
+static void ccat_functions_remove(struct ccat_device *const dev)
+{
+ struct ccat_function *func;
+ struct ccat_function *tmp;
+ list_for_each_entry_safe(func, tmp, &dev->functions, list) {
+ if (func->drv) {
+ func->drv->remove(func);
+ func->drv = NULL;
+ }
+ list_del(&func->list);
+ kfree(func);
+ }
+}
+
+#ifdef CONFIG_PCI
+static int ccat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct ccat_device *ccatdev;
+ u8 rev;
int status;
- u8 revision;
- struct ccat_device *ccatdev = kmalloc(sizeof(*ccatdev), GFP_KERNEL);
-
+
+ ccatdev = devm_kzalloc(&pdev->dev, sizeof(*ccatdev), GFP_KERNEL);
if (!ccatdev) {
pr_err("%s() out of memory.\n", __FUNCTION__);
return -ENOMEM;
}
- memset(ccatdev, 0, sizeof(*ccatdev));
ccatdev->pdev = pdev;
pci_set_drvdata(pdev, ccatdev);
status = pci_enable_device_mem(pdev);
if (status) {
- pr_info("enable %s failed: %d\n", pdev->dev.kobj.name, status);
+ pr_err("enable %s failed: %d\n", pdev->dev.kobj.name, status);
return status;
}
- status = pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
+ status = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if (status) {
- pr_warn("read CCAT pci revision failed with %d\n", status);
- return status;
- }
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
- if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) {
- pr_debug("64 bit DMA supported, pci rev: %u\n", revision);
- } else if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
- pr_debug("32 bit DMA supported, pci rev: %u\n", revision);
+ pr_err("read CCAT pci revision failed with %d\n", status);
+ goto disable_device;
+ }
+
+ status = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (status) {
+ pr_err("allocate mem_regions failed.\n");
+ goto disable_device;
+ }
+
+ status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (status) {
+ status =
+ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (status) {
+ pr_err("No suitable DMA available, pci rev: %u\n", rev);
+ goto release_regions;
+ }
+ pr_debug("32 bit DMA supported, pci rev: %u\n", rev);
} else {
- pr_warn("No suitable DMA available, pci rev: %u\n", revision);
- }
-#else
- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- pr_debug("64 bit DMA supported, pci rev: %u\n", revision);
- } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
- pr_debug("32 bit DMA supported, pci rev: %u\n", revision);
- } else {
- pr_warn("No suitable DMA available, pci rev: %u\n", revision);
- }
-#endif
-
- if (ccat_bar_init(&ccatdev->bar[0], 0, pdev)) {
- pr_warn("initialization of bar0 failed.\n");
- return -EIO;
- }
-
- if (ccat_bar_init(&ccatdev->bar[2], 2, pdev)) {
- pr_warn("initialization of bar2 failed.\n");
- return -EIO;
+ pr_debug("64 bit DMA supported, pci rev: %u\n", rev);
+ }
+
+ ccatdev->bar_0 = pci_iomap(pdev, 0, 0);
+ if (!ccatdev->bar_0) {
+ pr_err("initialization of bar0 failed.\n");
+ status = -EIO;
+ goto release_regions;
+ }
+
+ ccatdev->bar_2 = pci_iomap(pdev, 2, 0);
+ if (!ccatdev->bar_2) {
+ pr_warn("initialization of optional bar2 failed.\n");
}
pci_set_master(pdev);
@@ -262,21 +318,26 @@
pr_warn("some functions couldn't be initialized\n");
}
return 0;
-}
-
-static void ccat_remove(struct pci_dev *pdev)
+
+release_regions:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+ return status;
+}
+
+static void ccat_pci_remove(struct pci_dev *pdev)
{
struct ccat_device *ccatdev = pci_get_drvdata(pdev);
if (ccatdev) {
ccat_functions_remove(ccatdev);
- ccat_bar_free(&ccatdev->bar[2]);
- ccat_bar_free(&ccatdev->bar[0]);
+ if (ccatdev->bar_2)
+ pci_iounmap(pdev, ccatdev->bar_2);
+ pci_iounmap(pdev, ccatdev->bar_0);
+ pci_release_regions(pdev);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
- kfree(ccatdev);
- }
- pr_debug("%s() done.\n", __FUNCTION__);
+ }
}
#define PCI_DEVICE_ID_BECKHOFF_CCAT 0x5000
@@ -287,27 +348,76 @@
{0,},
};
-#if 0 /* prevent auto-loading */
MODULE_DEVICE_TABLE(pci, pci_ids);
-#endif
-
-static struct pci_driver pci_driver = {
+
+static struct pci_driver ccat_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = pci_ids,
- .probe = ccat_probe,
- .remove = ccat_remove,
+ .probe = ccat_pci_probe,
+ .remove = ccat_pci_remove,
};
-static void __exit ccat_exit_module(void)
-{
- pci_unregister_driver(&pci_driver);
-}
-
-static int __init ccat_init_module(void)
-{
- pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
- return pci_register_driver(&pci_driver);
-}
-
-module_exit(ccat_exit_module);
-module_init(ccat_init_module);
+module_pci_driver(ccat_pci_driver);
+
+#else /* #ifdef CONFIG_PCI */
+
+static int ccat_eim_probe(struct platform_device *pdev)
+{
+ struct ccat_device *ccatdev;
+
+ ccatdev = devm_kzalloc(&pdev->dev, sizeof(*ccatdev), GFP_KERNEL);
+ if (!ccatdev) {
+ pr_err("%s() out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ ccatdev->pdev = pdev;
+ platform_set_drvdata(pdev, ccatdev);
+
+ if (!request_mem_region(0xf0000000, 0x02000000, pdev->name)) {
+ pr_warn("request mem region failed.\n");
+ return -EIO;
+ }
+
+ if (!(ccatdev->bar_0 = ioremap(0xf0000000, 0x02000000))) {
+ pr_warn("initialization of bar0 failed.\n");
+ return -EIO;
+ }
+
+ ccatdev->bar_2 = NULL;
+
+ if (ccat_functions_init(ccatdev)) {
+ pr_warn("some functions couldn't be initialized\n");
+ }
+ return 0;
+}
+
+static int ccat_eim_remove(struct platform_device *pdev)
+{
+ struct ccat_device *ccatdev = platform_get_drvdata(pdev);
+
+ if (ccatdev) {
+ ccat_functions_remove(ccatdev);
+ iounmap(ccatdev->bar_0);
+ release_mem_region(0xf0000000, 0x02000000);
+ }
+ return 0;
+}
+
+static const struct of_device_id bhf_eim_ccat_ids[] = {
+ {.compatible = "bhf,emi-ccat",},
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, bhf_eim_ccat_ids);
+
+static struct platform_driver ccat_eim_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = bhf_eim_ccat_ids,
+ },
+ .probe = ccat_eim_probe,
+ .remove = ccat_eim_remove,
+};
+
+module_platform_driver(ccat_eim_driver);
+#endif /* #ifdef CONFIG_PCI */
--- a/devices/ccat/module.h Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/module.h Tue Feb 16 15:18:34 2016 +0100
@@ -22,140 +22,76 @@
#define _CCAT_H_
#include <linux/cdev.h>
+#include <linux/fs.h>
#include <linux/hrtimer.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include "../ecdev.h"
#define DRV_EXTRAVERSION "-ec"
-#define DRV_VERSION "0.10" DRV_EXTRAVERSION
+#define DRV_VERSION "0.14" DRV_EXTRAVERSION
#define DRV_DESCRIPTION "Beckhoff CCAT Ethernet/EtherCAT Network Driver"
#undef pr_fmt
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+extern const struct ccat_driver eth_eim_driver;
+extern const struct ccat_driver eth_dma_driver;
+extern const struct ccat_driver gpio_driver;
+extern const struct ccat_driver sram_driver;
+extern const struct ccat_driver update_driver;
+
/**
* CCAT function type identifiers (u16)
*/
enum ccat_info_t {
CCATINFO_NOTUSED = 0,
+ CCATINFO_ETHERCAT_NODMA = 0x3,
+ CCATINFO_GPIO = 0xd,
CCATINFO_EPCS_PROM = 0xf,
CCATINFO_ETHERCAT_MASTER_DMA = 0x14,
- CCATINFO_COPY_BLOCK = 0x17,
- CCATINFO_MAX
+ CCATINFO_SRAM = 0x16,
+};
+
+struct ccat_cdev {
+ atomic_t in_use;
+ void __iomem *ioaddr;
+ size_t iosize;
+ dev_t dev;
+ struct cdev cdev;
+ struct ccat_class *class;
};
/**
- * struct ccat_bar - CCAT PCI Base Address Register(BAR) configuration
- * @start: start address of this BAR
- * @end: end address of this BAR
- * @len: length of this BAR
- * @flags: flags set on this BAR
- * @ioaddr: ioremapped address of this bar
+ * struct cdev_buffer
+ * @ccdev: referenced character device
+ * @data: buffer used for write operations
+ * @size: number of bytes written to the data buffer
*/
-struct ccat_bar {
- unsigned long start;
- unsigned long end;
- unsigned long len;
- unsigned long flags;
- void __iomem *ioaddr;
+struct cdev_buffer {
+ struct ccat_cdev *ccdev;
+ size_t size;
+ char data[];
};
-/**
- * struct ccat_dma - CCAT DMA channel configuration
- * @phys: device-viewed address(physical) of the associated DMA memory
- * @virt: CPU-viewed address(virtual) of the associated DMA memory
- * @size: number of bytes in the associated DMA memory
- * @channel: CCAT DMA channel number
- * @dev: valid struct device pointer
- */
-struct ccat_dma {
- dma_addr_t phys;
- void *virt;
- size_t size;
- size_t channel;
- struct device *dev;
-};
-
-extern void ccat_dma_free(struct ccat_dma *const dma);
-extern int ccat_dma_init(struct ccat_dma *const dma, size_t channel,
- void __iomem * const ioaddr, struct device *const dev);
-
-/**
- * struct ccat_eth_frame - Ethernet frame with DMA descriptor header in front
- * @reservedn: is not used and should always be set to 0
- * @received: used for reception, is set to 1 by the CCAT when data was written
- * @length: number of bytes in the frame including the DMA header
- * @sent: is set to 1 by the CCAT when data was transmitted
- * @timestamp: a 64 bit EtherCAT timestamp
- * @data: the bytes of the ethernet frame
- */
-struct ccat_eth_frame {
- __le32 reserved1;
- __le32 rx_flags;
-#define CCAT_FRAME_RECEIVED 0x1
- __le16 length;
- __le16 reserved3;
- __le32 tx_flags;
-#define CCAT_FRAME_SENT 0x1
- __le64 timestamp;
- u8 data[0x800 - 3 * sizeof(u64)];
-#define CCAT_ETH_FRAME_HEAD_LEN offsetof(struct ccat_eth_frame, data)
-};
-
-/**
- * struct ccat_eth_register - CCAT register addresses in the PCI BAR
- * @mii: address of the CCAT management interface register
- * @tx_fifo: address of the CCAT TX DMA fifo register
- * @rx_fifo: address of the CCAT RX DMA fifo register
- * @mac: address of the CCAT media access control register
- * @rx_mem: address of the CCAT register holding the RX DMA address
- * @tx_mem: address of the CCAT register holding the TX DMA address
- * @misc: address of a CCAT register holding miscellaneous information
- */
-struct ccat_eth_register {
- void __iomem *mii;
- void __iomem *tx_fifo;
- void __iomem *rx_fifo;
- void __iomem *mac;
- void __iomem *rx_mem;
- void __iomem *tx_mem;
- void __iomem *misc;
-};
-
-/**
- * struct ccat_eth_dma_fifo - CCAT RX or TX DMA fifo
- * @add: callback used to add a frame to this fifo
- * @reg: PCI register address of this DMA fifo
- * @dma: information about the associated DMA memory
- */
-struct ccat_eth_dma_fifo {
- void (*add) (struct ccat_eth_dma_fifo *, struct ccat_eth_frame *);
- void __iomem *reg;
- const struct ccat_eth_frame *end;
- struct ccat_eth_frame *next;
- struct ccat_dma dma;
-};
+extern int ccat_cdev_open(struct inode *const i, struct file *const f);
+extern int ccat_cdev_release(struct inode *const i, struct file *const f);
/**
* struct ccat_device - CCAT device representation
* @pdev: pointer to the pci object allocated by the kernel
- * @ethdev: CCAT Ethernet/EtherCAT Master (with DMA) function, NULL if function is not available or failed to initialize
- * @update: CCAT Update function, NULL if function is not available or failed to initialize
- * @bar [0] and [2] holding information about PCI BARs 0 and 2.
+ * @bar_0: holding information about PCI BAR 0
+ * @bar_2: holding information about PCI BAR 2 (optional)
+ * @functions: list of available (driver loaded) FPGA functions
*
* One instance of a ccat_device should represent a physical CCAT. Since
- * a CCAT is implemented as FPGA the available functions can vary so
- * the function object pointers can be NULL.
- * Extra note: you will recognize that PCI BAR1 is not used and is a
- * waste of memory, thats true but right now, its very easy to use it
- * this way. So we might optimize it later.
+ * a CCAT is implemented as FPGA the available functions can vary.
*/
struct ccat_device {
- struct pci_dev *pdev;
- struct ccat_eth_priv *ethdev;
- struct ccat_update *update;
- struct ccat_bar bar[3]; //TODO optimize this
+ void *pdev;
+ void __iomem *bar_0;
+ void __iomem *bar_2;
+ struct list_head functions;
};
struct ccat_info_block {
@@ -163,106 +99,59 @@
u16 rev;
union {
u32 config;
+ u8 num_gpios;
+ struct {
+ u16 tx_size;
+ u16 rx_size;
+ };
struct {
u8 tx_dma_chan;
u8 rx_dma_chan;
};
+ struct {
+ u8 sram_width;
+ u8 sram_size;
+ u16 reserved;
+ };
};
u32 addr;
u32 size;
};
-/**
- * struct ccat_eth_priv - CCAT Ethernet/EtherCAT Master function (netdev)
- * @ccatdev: pointer to the parent struct ccat_device
- * @netdev: the net_device structure used by the kernel networking stack
- * @info: holds a copy of the CCAT Ethernet/EtherCAT Master function information block (read from PCI config space)
- * @reg: register addresses in PCI config space of the Ethernet/EtherCAT Master function
- * @rx_fifo: DMA fifo used for RX DMA descriptors
- * @tx_fifo: DMA fifo used for TX DMA descriptors
- * @poll_timer: interval timer used to poll CCAT for events like link changed, rx done, tx done
- * @rx_bytes: number of bytes received -> reported with ndo_get_stats64()
- * @rx_dropped: number of received frames, which were dropped -> reported with ndo_get_stats64()
- * @tx_bytes: number of bytes send -> reported with ndo_get_stats64()
- * @tx_dropped: number of frames requested to send, which were dropped -> reported with ndo_get_stats64()
- */
-struct ccat_eth_priv {
- const struct ccat_device *ccatdev;
- struct net_device *netdev;
+struct ccat_function {
+ const struct ccat_driver *drv;
+ struct ccat_device *ccat;
struct ccat_info_block info;
- struct ccat_eth_register reg;
- struct ccat_eth_dma_fifo rx_fifo;
- struct ccat_eth_dma_fifo tx_fifo;
- struct hrtimer poll_timer;
- atomic64_t rx_bytes;
- atomic64_t rx_dropped;
- atomic64_t tx_bytes;
- atomic64_t tx_dropped;
- ec_device_t *ecdev;
- void (*carrier_off) (struct net_device * netdev);
- bool (*carrier_ok) (const struct net_device * netdev);
- void (*carrier_on) (struct net_device * netdev);
- void (*kfree_skb_any) (struct sk_buff * skb);
- void (*start_queue) (struct net_device * netdev);
- void (*stop_queue) (struct net_device * netdev);
- void (*unregister) (struct net_device * netdev);
+ struct list_head list;
+ void *private_data;
};
-/**
- * same as: typedef struct _CCatInfoBlockOffs from CCatDefinitions.h
- * TODO add some checking facility outside of the linux tree
- */
-struct ccat_mac_infoblock {
- u32 reserved;
- u32 mii;
- u32 tx_fifo;
- u32 mac;
- u32 rx_mem;
- u32 tx_mem;
- u32 misc;
+struct ccat_class {
+ dev_t dev;
+ struct class *class;
+ atomic_t instances;
+ const unsigned count;
+ struct ccat_cdev *devices;
+ const char *name;
+ struct file_operations fops;
};
-struct ccat_mac_register {
- /** MAC error register @+0x0 */
- u8 frame_len_err;
- u8 rx_err;
- u8 crc_err;
- u8 link_lost_err;
- u32 reserved1;
- /** Buffer overflow errors @+0x8 */
- u8 rx_mem_full;
- u8 reserved2[7];
- /** MAC frame counter @+0x10 */
- u32 tx_frames;
- u32 rx_frames;
- u64 reserved3;
- /** MAC fifo level @+0x20 */
- u8 tx_fifo_level:7;
- u8 reserved4:1;
- u8 reserved5[7];
- /** TX memory full error @+0x28 */
- u8 tx_mem_full;
- u8 reserved6[7];
- u64 reserved8[9];
- /** Connection @+0x78 */
- u8 mii_connected;
+extern void ccat_cdev_remove(struct ccat_function *func);
+extern int ccat_cdev_probe(struct ccat_function *func,
+ struct ccat_class *cdev_class, size_t iosize);
+
+/**
+ * struct ccat_driver - CCAT FPGA function
+ * @probe: add device instance
+ * @remove: remove device instance
+ * @type: type of the FPGA function supported by this driver
+ * @cdev_class: if not NULL that driver supports ccat_class_init()/_exit()
+ */
+struct ccat_driver {
+ int (*probe) (struct ccat_function * func);
+ void (*remove) (struct ccat_function * drv);
+ enum ccat_info_t type;
+ struct ccat_class *cdev_class;
};
-/**
- * struct ccat_update - CCAT Update function (update)
- * @ccatdev: pointer to the parent struct ccat_device
- * @ioaddr: PCI base address of the CCAT Update function
- * dev: device number for this update function
- * cdev: character device used for the CCAT Update function
- * class: pointer to a device class used when registering the CCAT Update device
- * @info: holds a copy of the CCAT Update function information block (read from PCI config space)
- */
-struct ccat_update {
- struct kref refcount;
- void __iomem *ioaddr;
- dev_t dev;
- struct cdev cdev;
- struct class *class;
- struct ccat_info_block info;
-};
#endif /* #ifndef _CCAT_H_ */
--- a/devices/ccat/netdev.c Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/netdev.c Tue Feb 16 15:18:34 2016 +0100
@@ -1,6 +1,6 @@
/**
Network Driver for Beckhoff CCAT communication controller
- Copyright (C) 2014 Beckhoff Automation GmbH
+ Copyright (C) 2014 - 2015 Beckhoff Automation GmbH
Author: Patrick Bruenn <p.bruenn@beckhoff.com>
This program is free software; you can redistribute it and/or modify
@@ -23,8 +23,14 @@
#include <linux/module.h>
#include <linux/netdevice.h>
+#ifdef CONFIG_PCI
+#include <asm/dma.h>
+#else
+#define free_dma(X)
+#define request_dma(X, Y) ((int)(-EINVAL))
+#endif
+
#include "module.h"
-#include "netdev.h"
/**
* EtherCAT frame to enable forwarding on EtherCAT Terminals
@@ -44,23 +50,253 @@
};
#define FIFO_LENGTH 64
-#define POLL_TIME ktime_set(0, 100 * NSEC_PER_USEC)
-
-/**
- * Helper to check if frame in tx dma memory was already marked as sent by CCAT
- */
-static inline bool ccat_eth_frame_sent(const struct ccat_eth_frame *const frame)
-{
- return le32_to_cpu(frame->tx_flags) & CCAT_FRAME_SENT;
-}
-
-/**
- * Helper to check if frame in tx dma memory was already marked as sent by CCAT
- */
-static inline bool ccat_eth_frame_received(const struct ccat_eth_frame *const
- frame)
-{
- return le32_to_cpu(frame->rx_flags) & CCAT_FRAME_RECEIVED;
+#define POLL_TIME ktime_set(0, 50 * NSEC_PER_USEC)
+#define CCAT_ALIGNMENT ((size_t)(128 * 1024))
+#define CCAT_ALIGN_CHANNEL(x, c) ((typeof(x))(ALIGN((size_t)((x) + ((c) * CCAT_ALIGNMENT)), CCAT_ALIGNMENT)))
+
+struct ccat_dma_frame_hdr {
+ __le32 reserved1;
+ __le32 rx_flags;
+#define CCAT_FRAME_RECEIVED 0x1
+ __le16 length;
+ __le16 reserved3;
+ __le32 tx_flags;
+#define CCAT_FRAME_SENT 0x1
+ __le64 timestamp;
+};
+
+struct ccat_eim_frame_hdr {
+ __le16 length;
+ __le16 reserved3;
+ __le32 tx_flags;
+ __le64 timestamp;
+};
+
+struct ccat_eth_frame {
+ u8 placeholder[0x800];
+};
+
+struct ccat_dma_frame {
+ struct ccat_dma_frame_hdr hdr;
+ u8 data[sizeof(struct ccat_eth_frame) -
+ sizeof(struct ccat_dma_frame_hdr)];
+};
+
+struct ccat_eim_frame {
+ struct ccat_eim_frame_hdr hdr;
+ u8 data[sizeof(struct ccat_eth_frame) -
+ sizeof(struct ccat_eim_frame_hdr)];
+};
+
+#define MAX_PAYLOAD_SIZE \
+ (sizeof(struct ccat_eth_frame) - max(sizeof(struct ccat_dma_frame_hdr), sizeof(struct ccat_eim_frame_hdr)))
+
+/**
+ * struct ccat_eth_register - CCAT register addresses in the PCI BAR
+ * @mii: address of the CCAT management interface register
+ * @mac: address of the CCAT media access control register
+ * @rx_mem: address of the CCAT register holding the RX DMA address
+ * @tx_mem: address of the CCAT register holding the TX DMA address
+ * @misc: address of a CCAT register holding miscellaneous information
+ */
+struct ccat_eth_register {
+ void __iomem *mii;
+ void __iomem *mac;
+ void __iomem *rx_mem;
+ void __iomem *tx_mem;
+ void __iomem *misc;
+};
+
+/**
+ * struct ccat_dma_mem - CCAT DMA channel configuration
+ * @size: number of bytes in the associated DMA memory
+ * @phys: device-viewed address(physical) of the associated DMA memory
+ * @channel: CCAT DMA channel number
+ * @dev: valid struct device pointer
+ * @base: CPU-viewed address(virtual) of the associated DMA memory
+ */
+struct ccat_dma_mem {
+ size_t size;
+ dma_addr_t phys;
+ size_t channel;
+ struct device *dev;
+ void *base;
+};
+
+/**
+ * struct ccat_dma/eim/mem
+ * @next: pointer to the next frame in fifo ring buffer
+ * @start: aligned CPU-viewed address(virtual) of the associated memory
+ */
+struct ccat_dma {
+ struct ccat_dma_frame *next;
+ void *start;
+};
+
+struct ccat_eim {
+ struct ccat_eim_frame __iomem *next;
+ void __iomem *start;
+};
+
+struct ccat_mem {
+ struct ccat_eth_frame *next;
+ void *start;
+};
+
+/**
+ * struct ccat_eth_fifo - CCAT RX or TX fifo
+ * @ops: function pointer table for dma/eim and rx/tx specific fifo functions
+ * @reg: PCI register address of this fifo
+ * @rx_bytes: number of bytes processed -> reported with ndo_get_stats64()
+ * @rx_dropped: number of dropped frames -> reported with ndo_get_stats64()
+ * @mem/dma/eim: information about the associated memory
+ */
+struct ccat_eth_fifo {
+ const struct ccat_eth_fifo_operations *ops;
+ const struct ccat_eth_frame *end;
+ void __iomem *reg;
+ atomic64_t bytes;
+ atomic64_t dropped;
+ union {
+ struct ccat_mem mem;
+ struct ccat_dma dma;
+ struct ccat_eim eim;
+ };
+};
+
+/**
+ * struct ccat_eth_fifo_operations
+ * @ready: callback used to test the next frames ready bit
+ * @add: callback used to add a frame to this fifo
+ * @copy_to_skb: callback used to copy from rx fifos to skbs
+ * @skb: callback used to queue skbs into tx fifos
+ */
+struct ccat_eth_fifo_operations {
+ size_t(*ready) (struct ccat_eth_fifo *);
+ void (*add) (struct ccat_eth_fifo *);
+ union {
+ void (*copy_to_skb) (struct ccat_eth_fifo *, struct sk_buff *,
+ size_t);
+ void (*skb) (struct ccat_eth_fifo *, struct sk_buff *);
+ } queue;
+};
+
+/**
+ * same as: typedef struct _CCatInfoBlockOffs from CCatDefinitions.h
+ */
+struct ccat_mac_infoblock {
+ u32 reserved;
+ u32 mii;
+ u32 tx_fifo;
+ u32 mac;
+ u32 rx_mem;
+ u32 tx_mem;
+ u32 misc;
+};
+
+/**
+ * struct ccat_eth_priv - CCAT Ethernet/EtherCAT Master function (netdev)
+ * @func: pointer to the parent struct ccat_function
+ * @netdev: the net_device structure used by the kernel networking stack
+ * @reg: register addresses in PCI config space of the Ethernet/EtherCAT Master function
+ * @rx_fifo: fifo used for RX descriptors
+ * @tx_fifo: fifo used for TX descriptors
+ * @poll_timer: interval timer used to poll CCAT for events like link changed, rx done, tx done
+ */
+struct ccat_eth_priv {
+ struct ccat_function *func;
+ struct net_device *netdev;
+ struct ccat_eth_register reg;
+ struct ccat_eth_fifo rx_fifo;
+ struct ccat_eth_fifo tx_fifo;
+ struct hrtimer poll_timer;
+ struct ccat_dma_mem dma_mem;
+ ec_device_t *ecdev;
+ void (*carrier_off) (struct net_device * netdev);
+ bool(*carrier_ok) (const struct net_device * netdev);
+ void (*carrier_on) (struct net_device * netdev);
+ void (*kfree_skb_any) (struct sk_buff * skb);
+ void (*receive) (struct ccat_eth_priv *, size_t);
+ void (*start_queue) (struct net_device * netdev);
+ void (*stop_queue) (struct net_device * netdev);
+ void (*unregister) (struct net_device * netdev);
+};
+
+struct ccat_mac_register {
+ /** MAC error register @+0x0 */
+ u8 frame_len_err;
+ u8 rx_err;
+ u8 crc_err;
+ u8 link_lost_err;
+ u32 reserved1;
+ /** Buffer overflow errors @+0x8 */
+ u8 rx_mem_full;
+ u8 reserved2[7];
+ /** MAC frame counter @+0x10 */
+ u32 tx_frames;
+ u32 rx_frames;
+ u64 reserved3;
+ /** MAC fifo level @+0x20 */
+ u8 tx_fifo_level:7;
+ u8 reserved4:1;
+ u8 reserved5[7];
+ /** TX memory full error @+0x28 */
+ u8 tx_mem_full;
+ u8 reserved6[7];
+ u64 reserved8[9];
+ /** Connection @+0x78 */
+ u8 mii_connected;
+};
+
+static void fifo_set_end(struct ccat_eth_fifo *const fifo, size_t size)
+{
+ fifo->end = fifo->mem.start + size - sizeof(struct ccat_eth_frame);
+}
+
+static void ccat_dma_free(struct ccat_eth_priv *const priv)
+{
+ if (priv->dma_mem.base) {
+ const struct ccat_dma_mem tmp = priv->dma_mem;
+
+ memset(&priv->dma_mem, 0, sizeof(priv->dma_mem));
+ dma_free_coherent(tmp.dev, tmp.size, tmp.base, tmp.phys);
+ free_dma(priv->func->info.tx_dma_chan);
+ free_dma(priv->func->info.rx_dma_chan);
+ }
+}
+
+/**
+ * ccat_dma_init() - Initialize CCAT and host memory for DMA transfer
+ * @dma object for management data which will be initialized
+ * @channel number of the DMA channel
+ * @ioaddr of the pci bar2 configspace used to calculate the address of the pci dma configuration
+ * @dev which should be configured for DMA
+ */
+static int ccat_dma_init(struct ccat_dma_mem *const dma, size_t channel,
+ void __iomem * const bar2,
+ struct ccat_eth_fifo *const fifo)
+{
+ void __iomem *const ioaddr = bar2 + 0x1000 + (sizeof(u64) * channel);
+ const dma_addr_t phys = CCAT_ALIGN_CHANNEL(dma->phys, channel);
+ const u32 phys_hi = (sizeof(phys) > sizeof(u32)) ? phys >> 32 : 0;
+ fifo->dma.start = CCAT_ALIGN_CHANNEL(dma->base, channel);
+
+ fifo_set_end(fifo, CCAT_ALIGNMENT);
+ if (request_dma(channel, KBUILD_MODNAME)) {
+ pr_info("request dma channel %llu failed\n", (u64) channel);
+ return -EINVAL;
+ }
+
+ /** bit 0 enables 64 bit mode on ccat */
+ iowrite32((u32) phys | ((phys_hi) > 0), ioaddr);
+ iowrite32(phys_hi, ioaddr + 4);
+
+ pr_debug
+ ("DMA%llu mem initialized\n base: 0x%p\n start: 0x%p\n phys: 0x%09llx\n pci addr: 0x%01x%08x\n size: %llu |%llx bytes.\n",
+ (u64) channel, dma->base, fifo->dma.start, (u64) dma->phys,
+ ioread32(ioaddr + 4), ioread32(ioaddr),
+ (u64) dma->size, (u64) dma->size);
+ return 0;
}
static void ecdev_kfree_skb_any(struct sk_buff *skb)
@@ -91,6 +327,16 @@
/* dummy called if nothing has to be done in EtherCAT operation mode */
}
+static void ecdev_receive_dma(struct ccat_eth_priv *const priv, size_t len)
+{
+ ecdev_receive(priv->ecdev, priv->rx_fifo.dma.next->data, len);
+}
+
+static void ecdev_receive_eim(struct ccat_eth_priv *const priv, size_t len)
+{
+ ecdev_receive(priv->ecdev, priv->rx_fifo.eim.next->data, len);
+}
+
static void unregister_ecdev(struct net_device *const netdev)
{
struct ccat_eth_priv *const priv = netdev_priv(netdev);
@@ -98,172 +344,308 @@
ecdev_withdraw(priv->ecdev);
}
-static void ccat_eth_fifo_inc(struct ccat_eth_dma_fifo *fifo)
-{
- if (++fifo->next >= fifo->end)
- fifo->next = fifo->dma.virt;
-}
-
-typedef void (*fifo_add_function) (struct ccat_eth_dma_fifo *,
- struct ccat_eth_frame *);
-
-static void ccat_eth_rx_fifo_add(struct ccat_eth_dma_fifo *fifo,
- struct ccat_eth_frame *frame)
-{
- const size_t offset = ((void *)(frame) - fifo->dma.virt);
+static inline size_t fifo_eim_tx_ready(struct ccat_eth_fifo *const fifo)
+{
+ struct ccat_eth_priv *const priv =
+ container_of(fifo, struct ccat_eth_priv, tx_fifo);
+ static const size_t TX_FIFO_LEVEL_OFFSET = 0x20;
+ static const u8 TX_FIFO_LEVEL_MASK = 0x3F;
+ void __iomem *addr = priv->reg.mac + TX_FIFO_LEVEL_OFFSET;
+
+ return !(ioread8(addr) & TX_FIFO_LEVEL_MASK);
+}
+
+static inline size_t fifo_eim_rx_ready(struct ccat_eth_fifo *const fifo)
+{
+ static const size_t OVERHEAD = sizeof(struct ccat_eim_frame_hdr);
+ const size_t len = ioread16(&fifo->eim.next->hdr.length);
+
+ return (len < OVERHEAD) ? 0 : len - OVERHEAD;
+}
+
+static void ccat_eth_fifo_inc(struct ccat_eth_fifo *fifo)
+{
+ if (++fifo->mem.next > fifo->end)
+ fifo->mem.next = fifo->mem.start;
+}
+
+static void fifo_eim_rx_add(struct ccat_eth_fifo *const fifo)
+{
+ struct ccat_eim_frame __iomem *frame = fifo->eim.next;
+ iowrite16(0, frame);
+ wmb();
+}
+
+static void fifo_eim_tx_add(struct ccat_eth_fifo *const fifo)
+{
+}
+
+#define memcpy_from_ccat(DEST, SRC, LEN) memcpy(DEST,(__force void*)(SRC), LEN)
+#define memcpy_to_ccat(DEST, SRC, LEN) memcpy((__force void*)(DEST),SRC, LEN)
+static void fifo_eim_copy_to_linear_skb(struct ccat_eth_fifo *const fifo,
+ struct sk_buff *skb, const size_t len)
+{
+ memcpy_from_ccat(skb->data, fifo->eim.next->data, len);
+}
+
+static void fifo_eim_queue_skb(struct ccat_eth_fifo *const fifo,
+ struct sk_buff *skb)
+{
+ struct ccat_eim_frame __iomem *frame = fifo->eim.next;
+ const u32 addr_and_length =
+ (void __iomem *)frame - (void __iomem *)fifo->eim.start;
+
+ const __le16 length = cpu_to_le16(skb->len);
+ memcpy_to_ccat(&frame->hdr.length, &length, sizeof(length));
+ memcpy_to_ccat(frame->data, skb->data, skb->len);
+ iowrite32(addr_and_length, fifo->reg);
+}
+
+static void ccat_eth_fifo_hw_reset(struct ccat_eth_fifo *const fifo)
+{
+ if (fifo->reg) {
+ iowrite32(0, fifo->reg + 0x8);
+ wmb();
+ }
+}
+
+static void ccat_eth_fifo_reset(struct ccat_eth_fifo *const fifo)
+{
+ ccat_eth_fifo_hw_reset(fifo);
+
+ if (fifo->ops->add) {
+ fifo->mem.next = fifo->mem.start;
+ do {
+ fifo->ops->add(fifo);
+ ccat_eth_fifo_inc(fifo);
+ } while (fifo->mem.next != fifo->mem.start);
+ }
+}
+
+static inline size_t fifo_dma_tx_ready(struct ccat_eth_fifo *const fifo)
+{
+ const struct ccat_dma_frame *frame = fifo->dma.next;
+ return le32_to_cpu(frame->hdr.tx_flags) & CCAT_FRAME_SENT;
+}
+
+static inline size_t fifo_dma_rx_ready(struct ccat_eth_fifo *const fifo)
+{
+ static const size_t OVERHEAD =
+ offsetof(struct ccat_dma_frame_hdr, rx_flags);
+ const struct ccat_dma_frame *const frame = fifo->dma.next;
+
+ if (le32_to_cpu(frame->hdr.rx_flags) & CCAT_FRAME_RECEIVED) {
+ const size_t len = le16_to_cpu(frame->hdr.length);
+ return (len < OVERHEAD) ? 0 : len - OVERHEAD;
+ }
+ return 0;
+}
+
+static void ccat_eth_rx_fifo_dma_add(struct ccat_eth_fifo *const fifo)
+{
+ struct ccat_dma_frame *const frame = fifo->dma.next;
+ const size_t offset = (void *)frame - fifo->dma.start;
const u32 addr_and_length = (1 << 31) | offset;
- frame->rx_flags = cpu_to_le32(0);
+ frame->hdr.rx_flags = cpu_to_le32(0);
iowrite32(addr_and_length, fifo->reg);
}
-static void ccat_eth_tx_fifo_add_free(struct ccat_eth_dma_fifo *fifo,
- struct ccat_eth_frame *frame)
+static void ccat_eth_tx_fifo_dma_add_free(struct ccat_eth_fifo *const fifo)
{
/* mark frame as ready to use for tx */
- frame->tx_flags = cpu_to_le32(CCAT_FRAME_SENT);
-}
-
-static void ccat_eth_dma_fifo_reset(struct ccat_eth_dma_fifo *fifo)
-{
- /* reset hw fifo */
- iowrite32(0, fifo->reg + 0x8);
- wmb();
-
- if (fifo->add) {
- fifo->next = fifo->dma.virt;
- do {
- fifo->add(fifo, fifo->next);
- ccat_eth_fifo_inc(fifo);
- } while (fifo->next != fifo->dma.virt);
- }
-}
-
-static int ccat_eth_dma_fifo_init(struct ccat_eth_dma_fifo *fifo,
- void __iomem * const fifo_reg,
- fifo_add_function add, size_t channel,
- struct ccat_eth_priv *const priv)
-{
- if (0 !=
- ccat_dma_init(&fifo->dma, channel, priv->ccatdev->bar[2].ioaddr,
- &priv->ccatdev->pdev->dev)) {
- pr_info("init DMA%llu memory failed.\n", (u64) channel);
- return -1;
- }
- fifo->add = add;
- fifo->end = ((struct ccat_eth_frame *)fifo->dma.virt) + FIFO_LENGTH;
- fifo->reg = fifo_reg;
- return 0;
-}
-
-/**
- * Stop both (Rx/Tx) DMA fifo's and free related management structures
- */
-static void ccat_eth_priv_free_dma(struct ccat_eth_priv *priv)
+ fifo->dma.next->hdr.tx_flags = cpu_to_le32(CCAT_FRAME_SENT);
+}
+
+static void fifo_dma_copy_to_linear_skb(struct ccat_eth_fifo *const fifo,
+ struct sk_buff *skb, const size_t len)
+{
+ skb_copy_to_linear_data(skb, fifo->dma.next->data, len);
+}
+
+static void fifo_dma_queue_skb(struct ccat_eth_fifo *const fifo,
+ struct sk_buff *skb)
+{
+ struct ccat_dma_frame *frame = fifo->dma.next;
+ u32 addr_and_length;
+
+ frame->hdr.tx_flags = cpu_to_le32(0);
+ frame->hdr.length = cpu_to_le16(skb->len);
+
+ memcpy(frame->data, skb->data, skb->len);
+
+ /* Queue frame into CCAT TX-FIFO, CCAT ignores the first 8 bytes of the tx descriptor */
+ addr_and_length = offsetof(struct ccat_dma_frame_hdr, length);
+ addr_and_length += ((void *)frame - fifo->dma.start);
+ addr_and_length +=
+ ((skb->len + sizeof(struct ccat_dma_frame_hdr)) / 8) << 24;
+ iowrite32(addr_and_length, fifo->reg);
+}
+
+static const struct ccat_eth_fifo_operations dma_rx_fifo_ops = {
+ .add = ccat_eth_rx_fifo_dma_add,
+ .ready = fifo_dma_rx_ready,
+ .queue.copy_to_skb = fifo_dma_copy_to_linear_skb,
+};
+
+static const struct ccat_eth_fifo_operations dma_tx_fifo_ops = {
+ .add = ccat_eth_tx_fifo_dma_add_free,
+ .ready = fifo_dma_tx_ready,
+ .queue.skb = fifo_dma_queue_skb,
+};
+
+static const struct ccat_eth_fifo_operations eim_rx_fifo_ops = {
+ .add = fifo_eim_rx_add,
+ .queue.copy_to_skb = fifo_eim_copy_to_linear_skb,
+ .ready = fifo_eim_rx_ready,
+};
+
+static const struct ccat_eth_fifo_operations eim_tx_fifo_ops = {
+ .add = fifo_eim_tx_add,
+ .queue.skb = fifo_eim_queue_skb,
+ .ready = fifo_eim_tx_ready,
+};
+
+static void ccat_eth_priv_free(struct ccat_eth_priv *priv)
{
/* reset hw fifo's */
- iowrite32(0, priv->rx_fifo.reg + 0x8);
- iowrite32(0, priv->tx_fifo.reg + 0x8);
- wmb();
+ ccat_eth_fifo_hw_reset(&priv->rx_fifo);
+ ccat_eth_fifo_hw_reset(&priv->tx_fifo);
/* release dma */
- ccat_dma_free(&priv->rx_fifo.dma);
- ccat_dma_free(&priv->tx_fifo.dma);
-}
-
-/**
- * Initalizes both (Rx/Tx) DMA fifo's and related management structures
- */
-static int ccat_eth_priv_init_dma(struct ccat_eth_priv *priv)
-{
- if (ccat_eth_dma_fifo_init
- (&priv->rx_fifo, priv->reg.rx_fifo, ccat_eth_rx_fifo_add,
- priv->info.rx_dma_chan, priv)) {
- pr_warn("init Rx DMA fifo failed.\n");
- return -1;
- }
-
- if (ccat_eth_dma_fifo_init
- (&priv->tx_fifo, priv->reg.tx_fifo, ccat_eth_tx_fifo_add_free,
- priv->info.tx_dma_chan, priv)) {
- pr_warn("init Tx DMA fifo failed.\n");
- ccat_dma_free(&priv->rx_fifo.dma);
- return -1;
- }
-
- /* disable MAC filter */
+ ccat_dma_free(priv);
+}
+
+static int ccat_hw_disable_mac_filter(struct ccat_eth_priv *priv)
+{
iowrite8(0, priv->reg.mii + 0x8 + 6);
wmb();
return 0;
}
/**
- * Initializes the CCat... members of the ccat_eth_priv structure.
- * Call this function only if info and ioaddr are already initialized!
- */
-static void ccat_eth_priv_init_mappings(struct ccat_eth_priv *priv)
+ * Initalizes both (Rx/Tx) DMA fifo's and related management structures
+ */
+static int ccat_eth_priv_init_dma(struct ccat_eth_priv *priv)
+{
+ struct ccat_dma_mem *const dma = &priv->dma_mem;
+ struct pci_dev *const pdev = priv->func->ccat->pdev;
+ void __iomem *const bar_2 = priv->func->ccat->bar_2;
+ const u8 rx_chan = priv->func->info.rx_dma_chan;
+ const u8 tx_chan = priv->func->info.tx_dma_chan;
+ int status = 0;
+
+ dma->dev = &pdev->dev;
+ dma->size = CCAT_ALIGNMENT * 3;
+ dma->base =
+ dma_zalloc_coherent(dma->dev, dma->size, &dma->phys, GFP_KERNEL);
+ if (!dma->base || !dma->phys) {
+ pr_err("init DMA memory failed.\n");
+ return -ENOMEM;
+ }
+
+ priv->rx_fifo.ops = &dma_rx_fifo_ops;
+ status = ccat_dma_init(dma, rx_chan, bar_2, &priv->rx_fifo);
+ if (status) {
+ pr_info("init RX DMA memory failed.\n");
+ ccat_dma_free(priv);
+ return status;
+ }
+
+ priv->tx_fifo.ops = &dma_tx_fifo_ops;
+ status = ccat_dma_init(dma, tx_chan, bar_2, &priv->tx_fifo);
+ if (status) {
+ pr_info("init TX DMA memory failed.\n");
+ ccat_dma_free(priv);
+ return status;
+ }
+ return ccat_hw_disable_mac_filter(priv);
+}
+
+static int ccat_eth_priv_init_eim(struct ccat_eth_priv *priv)
+{
+ priv->rx_fifo.eim.start = priv->reg.rx_mem;
+ priv->rx_fifo.ops = &eim_rx_fifo_ops;
+ fifo_set_end(&priv->rx_fifo, sizeof(struct ccat_eth_frame));
+
+ priv->tx_fifo.eim.start = priv->reg.tx_mem;
+ priv->tx_fifo.ops = &eim_tx_fifo_ops;
+ fifo_set_end(&priv->tx_fifo, priv->func->info.tx_size);
+
+ return ccat_hw_disable_mac_filter(priv);
+}
+
+/**
+ * Initializes a struct ccat_eth_register with data from a corresponding
+ * CCAT function.
+ */
+static void ccat_eth_priv_init_reg(struct ccat_eth_priv *const priv)
{
struct ccat_mac_infoblock offsets;
- void __iomem *const func_base =
- priv->ccatdev->bar[0].ioaddr + priv->info.addr;
+ struct ccat_eth_register *const reg = &priv->reg;
+ const struct ccat_function *const func = priv->func;
+ void __iomem *const func_base = func->ccat->bar_0 + func->info.addr;
+
+ /* struct ccat_eth_fifo contains a union of ccat_dma, ccat_eim and ccat_mem
+ * the members next and start have to overlay the exact same memory,
+ * to support 'polymorphic' usage of them */
+ BUILD_BUG_ON(offsetof(struct ccat_dma, next) !=
+ offsetof(struct ccat_mem, next));
+ BUILD_BUG_ON(offsetof(struct ccat_dma, start) !=
+ offsetof(struct ccat_mem, start));
+ BUILD_BUG_ON(offsetof(struct ccat_dma, next) !=
+ offsetof(struct ccat_eim, next));
+ BUILD_BUG_ON(offsetof(struct ccat_dma, start) !=
+ offsetof(struct ccat_eim, start));
memcpy_fromio(&offsets, func_base, sizeof(offsets));
- priv->reg.mii = func_base + offsets.mii;
- priv->reg.tx_fifo = func_base + offsets.tx_fifo;
- priv->reg.rx_fifo = func_base + offsets.tx_fifo + 0x10;
- priv->reg.mac = func_base + offsets.mac;
- priv->reg.rx_mem = func_base + offsets.rx_mem;
- priv->reg.tx_mem = func_base + offsets.tx_mem;
- priv->reg.misc = func_base + offsets.misc;
+ reg->mii = func_base + offsets.mii;
+ priv->tx_fifo.reg = func_base + offsets.tx_fifo;
+ priv->rx_fifo.reg = func_base + offsets.tx_fifo + 0x10;
+ reg->mac = func_base + offsets.mac;
+ reg->rx_mem = func_base + offsets.rx_mem;
+ reg->tx_mem = func_base + offsets.tx_mem;
+ reg->misc = func_base + offsets.misc;
}
static netdev_tx_t ccat_eth_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct ccat_eth_priv *const priv = netdev_priv(dev);
- struct ccat_eth_dma_fifo *const fifo = &priv->tx_fifo;
- u32 addr_and_length;
+ struct ccat_eth_fifo *const fifo = &priv->tx_fifo;
if (skb_is_nonlinear(skb)) {
pr_warn("Non linear skb not supported -> drop frame.\n");
- atomic64_inc(&priv->tx_dropped);
+ atomic64_inc(&fifo->dropped);
priv->kfree_skb_any(skb);
return NETDEV_TX_OK;
}
- if (skb->len > sizeof(fifo->next->data)) {
+ if (skb->len > MAX_PAYLOAD_SIZE) {
pr_warn("skb.len %llu exceeds dma buffer %llu -> drop frame.\n",
- (u64) skb->len, (u64) sizeof(fifo->next->data));
- atomic64_inc(&priv->tx_dropped);
+ (u64) skb->len, (u64) MAX_PAYLOAD_SIZE);
+ atomic64_inc(&fifo->dropped);
priv->kfree_skb_any(skb);
return NETDEV_TX_OK;
}
- if (!ccat_eth_frame_sent(fifo->next)) {
+ if (!fifo->ops->ready(fifo)) {
netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
priv->stop_queue(priv->netdev);
return NETDEV_TX_BUSY;
}
/* prepare frame in DMA memory */
- fifo->next->tx_flags = cpu_to_le32(0);
- fifo->next->length = cpu_to_le16(skb->len);
- memcpy(fifo->next->data, skb->data, skb->len);
-
- /* Queue frame into CCAT TX-FIFO, CCAT ignores the first 8 bytes of the tx descriptor */
- addr_and_length = offsetof(struct ccat_eth_frame, length);
- addr_and_length += ((void *)fifo->next - fifo->dma.virt);
- addr_and_length += ((skb->len + CCAT_ETH_FRAME_HEAD_LEN) / 8) << 24;
- iowrite32(addr_and_length, priv->reg.tx_fifo);
+ fifo->ops->queue.skb(fifo, skb);
/* update stats */
- atomic64_add(skb->len, &priv->tx_bytes);
+ atomic64_add(skb->len, &fifo->bytes);
priv->kfree_skb_any(skb);
ccat_eth_fifo_inc(fifo);
/* stop queue if tx ring is full */
- if (!ccat_eth_frame_sent(fifo->next)) {
+ if (!fifo->ops->ready(fifo)) {
priv->stop_queue(priv->netdev);
}
return NETDEV_TX_OK;
@@ -286,24 +668,24 @@
ccat_eth_start_xmit(skb, dev);
}
-static void ccat_eth_receive(struct net_device *const dev,
- const void *const data, const size_t len)
+static void ccat_eth_receive(struct ccat_eth_priv *const priv, const size_t len)
{
struct sk_buff *const skb = dev_alloc_skb(len + NET_IP_ALIGN);
- struct ccat_eth_priv *const priv = netdev_priv(dev);
+ struct ccat_eth_fifo *const fifo = &priv->rx_fifo;
+ struct net_device *const dev = priv->netdev;
if (!skb) {
pr_info("%s() out of memory :-(\n", __FUNCTION__);
- atomic64_inc(&priv->rx_dropped);
+ atomic64_inc(&fifo->dropped);
return;
}
skb->dev = dev;
skb_reserve(skb, NET_IP_ALIGN);
- skb_copy_to_linear_data(skb, data, len);
+ fifo->ops->queue.copy_to_skb(fifo, skb, len);
skb_put(skb, len);
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_UNNECESSARY;
- atomic64_add(len, &priv->rx_bytes);
+ atomic64_add(len, &fifo->bytes);
netif_rx(skb);
}
@@ -325,8 +707,8 @@
speed == SPEED_100 ? 100 : 10,
cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); */
- ccat_eth_dma_fifo_reset(&priv->rx_fifo);
- ccat_eth_dma_fifo_reset(&priv->tx_fifo);
+ ccat_eth_fifo_reset(&priv->rx_fifo);
+ ccat_eth_fifo_reset(&priv->tx_fifo);
/* TODO reset CCAT MAC register */
@@ -343,7 +725,7 @@
inline static size_t ccat_eth_priv_read_link_state(const struct ccat_eth_priv
*const priv)
{
- return (1 << 24) == (ioread32(priv->reg.mii + 0x8 + 4) & (1 << 24));
+ return ! !(ioread32(priv->reg.mii + 0x8 + 4) & (1 << 24));
}
/**
@@ -366,25 +748,20 @@
*/
static void poll_rx(struct ccat_eth_priv *const priv)
{
- static const size_t overhead = CCAT_ETH_FRAME_HEAD_LEN - 4;
- struct ccat_eth_dma_fifo *const fifo = &priv->rx_fifo;
-
- /* TODO omit possible deadlock in situations with heavy traffic */
- while (ccat_eth_frame_received(fifo->next)) {
- const size_t len = le16_to_cpu(fifo->next->length) - overhead;
- if (priv->ecdev) {
- ecdev_receive(priv->ecdev, fifo->next->data, len);
- } else {
- ccat_eth_receive(priv->netdev, fifo->next->data, len);
- }
- ccat_eth_rx_fifo_add(fifo, fifo->next);
+ struct ccat_eth_fifo *const fifo = &priv->rx_fifo;
+ const size_t len = fifo->ops->ready(fifo);
+
+ if (len) {
+ priv->receive(priv, len);
+ fifo->ops->add(fifo);
ccat_eth_fifo_inc(fifo);
}
}
-static void ec_poll_rx(struct net_device *dev)
+static void ec_poll(struct net_device *dev)
{
struct ccat_eth_priv *const priv = netdev_priv(dev);
+ poll_link(priv);
poll_rx(priv);
}
@@ -393,7 +770,7 @@
*/
static void poll_tx(struct ccat_eth_priv *const priv)
{
- if (ccat_eth_frame_sent(priv->tx_fifo.next)) {
+ if (priv->tx_fifo.ops->ready(&priv->tx_fifo)) {
netif_wake_queue(priv->netdev);
}
}
@@ -408,10 +785,8 @@
container_of(timer, struct ccat_eth_priv, poll_timer);
poll_link(priv);
- if(!priv->ecdev) {
- poll_rx(priv);
- poll_tx(priv);
- }
+ poll_rx(priv);
+ poll_tx(priv);
hrtimer_forward_now(timer, POLL_TIME);
return HRTIMER_RESTART;
}
@@ -421,15 +796,16 @@
{
struct ccat_eth_priv *const priv = netdev_priv(dev);
struct ccat_mac_register mac;
+
memcpy_fromio(&mac, priv->reg.mac, sizeof(mac));
storage->rx_packets = mac.rx_frames; /* total packets received */
storage->tx_packets = mac.tx_frames; /* total packets transmitted */
- storage->rx_bytes = atomic64_read(&priv->rx_bytes); /* total bytes received */
- storage->tx_bytes = atomic64_read(&priv->tx_bytes); /* total bytes transmitted */
+ storage->rx_bytes = atomic64_read(&priv->rx_fifo.bytes); /* total bytes received */
+ storage->tx_bytes = atomic64_read(&priv->tx_fifo.bytes); /* total bytes transmitted */
storage->rx_errors = mac.frame_len_err + mac.rx_mem_full + mac.crc_err + mac.rx_err; /* bad packets received */
storage->tx_errors = mac.tx_mem_full; /* packet transmit problems */
- storage->rx_dropped = atomic64_read(&priv->rx_dropped); /* no space in linux buffers */
- storage->tx_dropped = atomic64_read(&priv->tx_dropped); /* no space available in linux */
+ storage->rx_dropped = atomic64_read(&priv->rx_fifo.dropped); /* no space in linux buffers */
+ storage->tx_dropped = atomic64_read(&priv->tx_fifo.dropped); /* no space available in linux */
//TODO __u64 multicast; /* multicast packets received */
//TODO __u64 collisions;
@@ -458,9 +834,11 @@
{
struct ccat_eth_priv *const priv = netdev_priv(dev);
- hrtimer_init(&priv->poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- priv->poll_timer.function = poll_timer_callback;
- hrtimer_start(&priv->poll_timer, POLL_TIME, HRTIMER_MODE_REL);
+ if (!priv->ecdev) {
+ hrtimer_init(&priv->poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ priv->poll_timer.function = poll_timer_callback;
+ hrtimer_start(&priv->poll_timer, POLL_TIME, HRTIMER_MODE_REL);
+ }
return 0;
}
@@ -469,7 +847,9 @@
struct ccat_eth_priv *const priv = netdev_priv(dev);
priv->stop_queue(dev);
- hrtimer_cancel(&priv->poll_timer);
+ if (!priv->ecdev) {
+ hrtimer_cancel(&priv->poll_timer);
+ }
return 0;
}
@@ -480,50 +860,60 @@
.ndo_stop = ccat_eth_stop,
};
-struct ccat_eth_priv *ccat_eth_init(const struct ccat_device *const ccatdev,
- const void __iomem * const addr)
-{
- struct ccat_eth_priv *priv;
+static struct ccat_eth_priv *ccat_eth_alloc_netdev(struct ccat_function *func)
+{
+ struct ccat_eth_priv *priv = NULL;
struct net_device *const netdev = alloc_etherdev(sizeof(*priv));
- priv = netdev_priv(netdev);
- priv->netdev = netdev;
- priv->ccatdev = ccatdev;
-
- /* ccat register mappings */
- memcpy_fromio(&priv->info, addr, sizeof(priv->info));
- ccat_eth_priv_init_mappings(priv);
-
- if (ccat_eth_priv_init_dma(priv)) {
- pr_warn("%s(): DMA initialization failed.\n", __FUNCTION__);
- free_netdev(netdev);
- return NULL;
- }
+ if (netdev) {
+ priv = netdev_priv(netdev);
+ memset(priv, 0, sizeof(*priv));
+ priv->netdev = netdev;
+ priv->func = func;
+ ccat_eth_priv_init_reg(priv);
+ }
+ return priv;
+}
+
+static int ccat_eth_init_netdev(struct ccat_eth_priv *priv)
+{
+ int status;
/* init netdev with MAC and stack callbacks */
- memcpy_fromio(netdev->dev_addr, priv->reg.mii + 8, netdev->addr_len);
- netdev->netdev_ops = &ccat_eth_netdev_ops;
+ memcpy_fromio(priv->netdev->dev_addr, priv->reg.mii + 8,
+ priv->netdev->addr_len);
+ priv->netdev->netdev_ops = &ccat_eth_netdev_ops;
/* use as EtherCAT device? */
- priv->ecdev = ecdev_offer(netdev, ec_poll_rx, THIS_MODULE);
+ priv->carrier_off = ecdev_carrier_off;
+ priv->carrier_ok = ecdev_carrier_ok;
+ priv->carrier_on = ecdev_carrier_on;
+ priv->kfree_skb_any = ecdev_kfree_skb_any;
+
+ /* It would be more intuitive to check for:
+ * if (priv->func->drv->type == CCATINFO_ETHERCAT_MASTER_DMA) {
+ * unfortunately priv->func->drv is not initialized until probe() returns.
+ * So we check if there is a rx dma fifo registered to determine dma/io mode */
+ if (&dma_rx_fifo_ops == priv->rx_fifo.ops) {
+ priv->receive = ecdev_receive_dma;
+ } else {
+ priv->receive = ecdev_receive_eim;
+ }
+ priv->start_queue = ecdev_nop;
+ priv->stop_queue = ecdev_nop;
+ priv->unregister = unregister_ecdev;
+ priv->ecdev = ecdev_offer(priv->netdev, ec_poll, THIS_MODULE);
if (priv->ecdev) {
- priv->carrier_off = ecdev_carrier_off;
- priv->carrier_ok = ecdev_carrier_ok;
- priv->carrier_on = ecdev_carrier_on;
- priv->kfree_skb_any = ecdev_kfree_skb_any;
- priv->start_queue = ecdev_nop;
- priv->stop_queue = ecdev_nop;
- priv->unregister = unregister_ecdev;
-
- priv->carrier_off(netdev);
+ priv->carrier_off(priv->netdev);
if (ecdev_open(priv->ecdev)) {
pr_info("unable to register network device.\n");
ecdev_withdraw(priv->ecdev);
- ccat_eth_priv_free_dma(priv);
- free_netdev(netdev);
- return NULL;
+ ccat_eth_priv_free(priv);
+ free_netdev(priv->netdev);
+ return -1; // TODO return better error code
}
- return priv;
+ priv->func->private_data = priv;
+ return 0;
}
/* EtherCAT disabled -> prepare normal ethernet mode */
@@ -531,24 +921,82 @@
priv->carrier_ok = netif_carrier_ok;
priv->carrier_on = netif_carrier_on;
priv->kfree_skb_any = dev_kfree_skb_any;
+ priv->receive = ccat_eth_receive;
priv->start_queue = netif_start_queue;
priv->stop_queue = netif_stop_queue;
priv->unregister = unregister_netdev;
-
- priv->carrier_off(netdev);
- if (register_netdev(netdev)) {
+ priv->carrier_off(priv->netdev);
+
+ status = register_netdev(priv->netdev);
+ if (status) {
pr_info("unable to register network device.\n");
- ccat_eth_priv_free_dma(priv);
- free_netdev(netdev);
- return NULL;
- }
- pr_info("registered %s as network device.\n", netdev->name);
- return priv;
-}
-
-void ccat_eth_remove(struct ccat_eth_priv *const priv)
-{
- priv->unregister(priv->netdev);
- ccat_eth_priv_free_dma(priv);
- free_netdev(priv->netdev);
-}
+ ccat_eth_priv_free(priv);
+ free_netdev(priv->netdev);
+ return status;
+ }
+ pr_info("registered %s as network device.\n", priv->netdev->name);
+ priv->func->private_data = priv;
+ return 0;
+}
+
+static int ccat_eth_dma_probe(struct ccat_function *func)
+{
+ struct ccat_eth_priv *priv = ccat_eth_alloc_netdev(func);
+ int status;
+
+ if (!priv)
+ return -ENOMEM;
+
+ status = ccat_eth_priv_init_dma(priv);
+ if (status) {
+ pr_warn("%s(): DMA initialization failed.\n", __FUNCTION__);
+ free_netdev(priv->netdev);
+ return status;
+ }
+ return ccat_eth_init_netdev(priv);
+}
+
+static void ccat_eth_dma_remove(struct ccat_function *func)
+{
+ struct ccat_eth_priv *const eth = func->private_data;
+ eth->unregister(eth->netdev);
+ ccat_eth_priv_free(eth);
+ free_netdev(eth->netdev);
+}
+
+const struct ccat_driver eth_dma_driver = {
+ .type = CCATINFO_ETHERCAT_MASTER_DMA,
+ .probe = ccat_eth_dma_probe,
+ .remove = ccat_eth_dma_remove,
+};
+
+static int ccat_eth_eim_probe(struct ccat_function *func)
+{
+ struct ccat_eth_priv *priv = ccat_eth_alloc_netdev(func);
+ int status;
+
+ if (!priv)
+ return -ENOMEM;
+
+ status = ccat_eth_priv_init_eim(priv);
+ if (status) {
+ pr_warn("%s(): memory initialization failed.\n", __FUNCTION__);
+ free_netdev(priv->netdev);
+ return status;
+ }
+ return ccat_eth_init_netdev(priv);
+}
+
+static void ccat_eth_eim_remove(struct ccat_function *func)
+{
+ struct ccat_eth_priv *const eth = func->private_data;
+ eth->unregister(eth->netdev);
+ ccat_eth_priv_free(eth);
+ free_netdev(eth->netdev);
+}
+
+const struct ccat_driver eth_eim_driver = {
+ .type = CCATINFO_ETHERCAT_NODMA,
+ .probe = ccat_eth_eim_probe,
+ .remove = ccat_eth_eim_remove,
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/sram.c Tue Feb 16 15:18:34 2016 +0100
@@ -0,0 +1,108 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include "module.h"
+#include <asm/io.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#define CCAT_SRAM_DEVICES_MAX 4
+
+static ssize_t __sram_read(struct cdev_buffer *buffer, char __user * buf,
+ size_t len, loff_t * off)
+{
+ memcpy_fromio(buffer->data, buffer->ccdev->ioaddr + *off, len);
+ if (copy_to_user(buf, buffer->data, len))
+ return -EFAULT;
+
+ *off += len;
+ return len;
+}
+
+static ssize_t ccat_sram_read(struct file *const f, char __user * buf,
+ size_t len, loff_t * off)
+{
+ struct cdev_buffer *buffer = f->private_data;
+ const size_t iosize = buffer->ccdev->iosize;
+
+ if (*off >= iosize) {
+ return 0;
+ }
+
+ len = min(len, (size_t) (iosize - *off));
+
+ return __sram_read(buffer, buf, len, off);
+}
+
+static ssize_t ccat_sram_write(struct file *const f, const char __user * buf,
+ size_t len, loff_t * off)
+{
+ struct cdev_buffer *const buffer = f->private_data;
+
+ if (*off + len > buffer->ccdev->iosize) {
+ return 0;
+ }
+
+ if (copy_from_user(buffer->data, buf, len)) {
+ return -EFAULT;
+ }
+
+ memcpy_toio(buffer->ccdev->ioaddr + *off, buffer->data, len);
+
+ *off += len;
+ return len;
+}
+
+static struct ccat_cdev dev_table[CCAT_SRAM_DEVICES_MAX];
+static struct ccat_class cdev_class = {
+ .instances = {0},
+ .count = CCAT_SRAM_DEVICES_MAX,
+ .devices = dev_table,
+ .name = "ccat_sram",
+ .fops = {
+ .owner = THIS_MODULE,
+ .open = ccat_cdev_open,
+ .release = ccat_cdev_release,
+ .read = ccat_sram_read,
+ .write = ccat_sram_write,
+ },
+};
+
+static int ccat_sram_probe(struct ccat_function *func)
+{
+ static const u8 NO_SRAM_CONNECTED = 0;
+ const u8 type = func->info.sram_width & 0x3;
+ const size_t iosize = (1 << func->info.sram_size);
+
+ pr_info("%s: 0x%04x rev: 0x%04x\n", __FUNCTION__, func->info.type,
+ func->info.rev);
+ if (type == NO_SRAM_CONNECTED) {
+ return -ENODEV;
+ }
+ return ccat_cdev_probe(func, &cdev_class, iosize);
+}
+
+const struct ccat_driver sram_driver = {
+ .type = CCATINFO_SRAM,
+ .probe = ccat_sram_probe,
+ .remove = ccat_cdev_remove,
+ .cdev_class = &cdev_class,
+};
--- a/devices/ccat/update.c Fri Dec 18 12:30:45 2015 +0100
+++ b/devices/ccat/update.c Tue Feb 16 15:18:34 2016 +0100
@@ -18,14 +18,13 @@
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include "module.h"
-#include "update.h"
-
+
+#define CCAT_DEVICES_MAX 5
#define CCAT_DATA_IN_4 0x038
#define CCAT_DATA_IN_N 0x7F0
#define CCAT_DATA_OUT_4 0x030
@@ -46,18 +45,6 @@
((((B) * 0x0802LU & 0x22110LU) | ((B) * 0x8020LU & 0x88440LU)) * 0x10101LU >> 16)
/**
- * struct update_buffer - keep track of a CCAT FPGA update
- * @update: pointer to a valid ccat_update object
- * @data: buffer used for write operations
- * @size: number of bytes written to the data buffer, if 0 on ccat_update_release() no data will be written to FPGA
- */
-struct update_buffer {
- struct ccat_update *update;
- char data[CCAT_FLASH_SIZE];
- size_t size;
-};
-
-/**
* wait_until_busy_reset() - wait until the busy flag was reset
* @ioaddr: address of the CCAT Update function in PCI config space
*/
@@ -243,78 +230,34 @@
* ccat_write_flash() - Write a new CCAT configuration to FPGA's flash
* @update: a CCAT Update buffer containing the new FPGA configuration
*/
-static void ccat_write_flash(const struct update_buffer *const update)
-{
- const char *buf = update->data;
+static void ccat_write_flash(const struct cdev_buffer *const buffer)
+{
+ const char *buf = buffer->data;
u32 off = 0;
- size_t len = update->size;
+ size_t len = buffer->size;
while (len > CCAT_WRITE_BLOCK_SIZE) {
- ccat_write_flash_block(update->update->ioaddr, off,
+ ccat_write_flash_block(buffer->ccdev->ioaddr, off,
(u16) CCAT_WRITE_BLOCK_SIZE, buf);
off += CCAT_WRITE_BLOCK_SIZE;
buf += CCAT_WRITE_BLOCK_SIZE;
len -= CCAT_WRITE_BLOCK_SIZE;
}
- ccat_write_flash_block(update->update->ioaddr, off, (u16) len, buf);
-}
-
-/**
- * ccat_update_destroy() - Cleanup the CCAT Update function
- * @ref: pointer to a struct kref embedded into a struct ccat_update, which we intend to destroy
- *
- * Retrieves the parent struct ccat_update and destroys it.
- */
-static void ccat_update_destroy(struct kref *ref)
-{
- struct ccat_update *update =
- container_of(ref, struct ccat_update, refcount);
-
- cdev_del(&update->cdev);
- device_destroy(update->class, update->dev);
- class_destroy(update->class);
- unregister_chrdev_region(update->dev, 1);
- kfree(update);
- pr_debug("%s(): done\n", __FUNCTION__);
-}
-
-static int ccat_update_open(struct inode *const i, struct file *const f)
-{
- struct ccat_update *update =
- container_of(i->i_cdev, struct ccat_update, cdev);
- struct update_buffer *buf;
-
- kref_get(&update->refcount);
- if (atomic_read(&update->refcount.refcount) > 2) {
- kref_put(&update->refcount, ccat_update_destroy);
- return -EBUSY;
- }
-
- buf = kzalloc(sizeof(*buf), GFP_KERNEL);
- if (!buf) {
- kref_put(&update->refcount, ccat_update_destroy);
- return -ENOMEM;
- }
-
- buf->update = update;
- f->private_data = buf;
- return 0;
+ ccat_write_flash_block(buffer->ccdev->ioaddr, off, (u16) len, buf);
}
static int ccat_update_release(struct inode *const i, struct file *const f)
{
- const struct update_buffer *const buf = f->private_data;
- struct ccat_update *const update = buf->update;
+ const struct cdev_buffer *const buf = f->private_data;
+ void __iomem *ioaddr = buf->ccdev->ioaddr;
if (buf->size > 0) {
- ccat_update_cmd(update->ioaddr, CCAT_WRITE_ENABLE);
- ccat_update_cmd(update->ioaddr, CCAT_BULK_ERASE);
- ccat_wait_status_cleared(update->ioaddr);
+ ccat_update_cmd(ioaddr, CCAT_WRITE_ENABLE);
+ ccat_update_cmd(ioaddr, CCAT_BULK_ERASE);
+ ccat_wait_status_cleared(ioaddr);
ccat_write_flash(buf);
}
- kfree(f->private_data);
- kref_put(&update->refcount, ccat_update_destroy);
- return 0;
+ return ccat_cdev_release(i, f);
}
/**
@@ -333,18 +276,16 @@
static ssize_t ccat_update_read(struct file *const f, char __user * buf,
size_t len, loff_t * off)
{
- struct update_buffer *update = f->private_data;
-
- if (!buf || !off) {
- return -EINVAL;
- }
- if (*off >= CCAT_FLASH_SIZE) {
+ struct cdev_buffer *buffer = f->private_data;
+ const size_t iosize = buffer->ccdev->iosize;
+
+ if (*off >= iosize) {
return 0;
}
- if (*off + len >= CCAT_FLASH_SIZE) {
- len = CCAT_FLASH_SIZE - *off;
- }
- return ccat_read_flash(update->update->ioaddr, buf, len, off);
+
+ len = min(len, (size_t) (iosize - *off));
+
+ return ccat_read_flash(buffer->ccdev->ioaddr, buf, len, off);
}
/**
@@ -355,105 +296,56 @@
* @off: current offset in the configuration data
*
* Copies data from user space (possibly a *.rbf) to the CCAT FPGA's
- * configuration flash to user space.
+ * configuration flash.
*
* Return: the number of bytes written, or 0 if flash end is reached
*/
-
static ssize_t ccat_update_write(struct file *const f, const char __user * buf,
size_t len, loff_t * off)
{
- struct update_buffer *const update = f->private_data;
-
- if (*off + len > sizeof(update->data))
+ struct cdev_buffer *const buffer = f->private_data;
+
+ if (*off + len > buffer->ccdev->iosize) {
return 0;
-
- if (copy_from_user(update->data + *off, buf, len)) {
+ }
+
+ if (copy_from_user(buffer->data + *off, buf, len)) {
return -EFAULT;
}
*off += len;
- update->size = *off;
+ buffer->size = *off;
return len;
}
-static struct file_operations update_ops = {
- .owner = THIS_MODULE,
- .open = ccat_update_open,
- .release = ccat_update_release,
- .read = ccat_update_read,
- .write = ccat_update_write,
+static struct ccat_cdev dev_table[CCAT_DEVICES_MAX];
+static struct ccat_class cdev_class = {
+ .count = CCAT_DEVICES_MAX,
+ .devices = dev_table,
+ .name = "ccat_update",
+ .fops = {
+ .owner = THIS_MODULE,
+ .open = ccat_cdev_open,
+ .release = ccat_update_release,
+ .read = ccat_update_read,
+ .write = ccat_update_write,
+ },
};
-/**
- * ccat_get_prom_id() - Read CCAT PROM ID
- * @ioaddr: address of the CCAT Update function in PCI config space
- *
- * Return: the CCAT FPGA's PROM identifier
- */
-u8 ccat_get_prom_id(void __iomem * const ioaddr)
-{
- ccat_update_cmd(ioaddr, CCAT_GET_PROM_ID);
- return ioread8(ioaddr + 0x38);
-}
-
-/**
- * ccat_update_init() - Initialize the CCAT Update function
- */
-struct ccat_update *ccat_update_init(const struct ccat_device *const ccatdev,
- void __iomem * const addr)
-{
- struct ccat_update *const update = kzalloc(sizeof(*update), GFP_KERNEL);
-
- if (!update) {
- return NULL;
- }
- kref_init(&update->refcount);
- update->ioaddr = ccatdev->bar[0].ioaddr + ioread32(addr + 0x8);
- memcpy_fromio(&update->info, addr, sizeof(update->info));
-
- if (0x00 != update->info.rev) {
- pr_warn("CCAT Update rev. %d not supported\n",
- update->info.rev);
- goto cleanup;
- }
-
- if (alloc_chrdev_region(&update->dev, 0, 1, KBUILD_MODNAME)) {
- pr_warn("alloc_chrdev_region() failed\n");
- goto cleanup;
- }
-
- update->class = class_create(THIS_MODULE, "ccat_update");
- if (NULL == update->class) {
- pr_warn("Create device class failed\n");
- goto cleanup;
- }
-
- if (NULL ==
- device_create(update->class, NULL, update->dev, NULL,
- "ccat_update")) {
- pr_warn("device_create() failed\n");
- goto cleanup;
- }
-
- cdev_init(&update->cdev, &update_ops);
- update->cdev.owner = THIS_MODULE;
- update->cdev.ops = &update_ops;
- if (cdev_add(&update->cdev, update->dev, 1)) {
- pr_warn("add update device failed\n");
- goto cleanup;
- }
- return update;
-cleanup:
- kref_put(&update->refcount, ccat_update_destroy);
- return NULL;
-}
-
-/**
- * ccat_update_remove() - Prepare the CCAT Update function for removal
- */
-void ccat_update_remove(struct ccat_update *update)
-{
- kref_put(&update->refcount, ccat_update_destroy);
- pr_debug("%s(): done\n", __FUNCTION__);
-}
+static int ccat_update_probe(struct ccat_function *func)
+{
+ static const u16 SUPPORTED_REVISION = 0x00;
+
+ if (SUPPORTED_REVISION != func->info.rev) {
+ pr_warn("CCAT Update rev. %d not supported\n", func->info.rev);
+ return -ENODEV;
+ }
+ return ccat_cdev_probe(func, &cdev_class, CCAT_FLASH_SIZE);
+}
+
+const struct ccat_driver update_driver = {
+ .type = CCATINFO_EPCS_PROM,
+ .probe = ccat_update_probe,
+ .remove = ccat_cdev_remove,
+ .cdev_class = &cdev_class,
+};