--- a/.hgignore Fri May 13 15:33:16 2011 +0200
+++ b/.hgignore Fri May 13 15:34:20 2011 +0200
@@ -136,3 +136,5 @@
tool/Makefile.in
tool/TAGS
tool/ethercat
+debuild.log
+
--- a/.hgtags Fri May 13 15:33:16 2011 +0200
+++ b/.hgtags Fri May 13 15:34:20 2011 +0200
@@ -1,1 +1,2 @@
b6cfd85db58e116ea155a52a584e863fc6ad0eff version-1.3.2
+ce2fae4d3c4fae6a3cb6d8a91a3df9bbb272ff82 Stable
--- a/FEATURES Fri May 13 15:33:16 2011 +0200
+++ b/FEATURES Fri May 13 15:34:20 2011 +0200
@@ -27,6 +27,7 @@
* Supports any realtime environment through independent architecture.
- RTAI, Xenomai, RT-Preempt, etc.
+ - RTDM Interface for userspace realtime enviroments
- Operation possible without any realtime extension at all.
* Common API for Realtime-Applications in kernel- and userspace.
--- a/Kbuild.in Fri May 13 15:33:16 2011 +0200
+++ b/Kbuild.in Fri May 13 15:34:20 2011 +0200
@@ -35,4 +35,8 @@
obj-m += tty/
endif
+ifeq (@ENABLE_RTDM@,1)
+ obj-m += rtdm/
+endif
+
#------------------------------------------------------------------------------
--- a/Makefile.am Fri May 13 15:33:16 2011 +0200
+++ b/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -47,6 +47,10 @@
SUBDIRS += tty
endif
+if ENABLE_RTDM
+SUBDIRS += rtdm
+endif
+
# userspace example depends on lib/
SUBDIRS += examples
@@ -59,6 +63,7 @@
master \
script \
tool \
+ rtdm \
tty
noinst_HEADERS = \
--- a/configure.ac Fri May 13 15:33:16 2011 +0200
+++ b/configure.ac Fri May 13 15:34:20 2011 +0200
@@ -365,13 +365,15 @@
AC_ARG_WITH([rtai-dir],
AC_HELP_STRING(
[--with-rtai-dir=<DIR>],
- [RTAI path (only for RTAI examples)]
+ [RTAI path (only for RTDM Interface or RTAI examples)]
),
[
rtaidir=[$withval]
+ rtai=1
],
[
rtaidir=""
+ rtai=0
]
)
@@ -387,6 +389,71 @@
fi
AC_SUBST(RTAI_DIR,[$rtaidir])
+AM_CONDITIONAL(ENABLE_RTAI, test "x$rtai" = "x1")
+AC_SUBST(ENABLE_RTAI,[$rtai])
+
+#------------------------------------------------------------------------------
+# Xenomai path (optional)
+#------------------------------------------------------------------------------
+
+AC_ARG_WITH([xenomai-dir],
+ AC_HELP_STRING(
+ [--with-xenomai-dir=<DIR>],
+ [Xenomai path (only for RTDM Interface)]
+ ),
+ [
+ xenomaidir=[$withval]
+ xeno=1
+ ],
+ [
+ xenomaidir=""
+ xeno=0
+ ]
+)
+
+AC_MSG_CHECKING([for Xenomai path])
+
+if test -z "${xenomaidir}"; then
+ AC_MSG_RESULT([not specified.])
+else
+ if test \! -r ${xenomaidir}/include/xeno_config.h; then
+ AC_MSG_ERROR([no Xenomai installation found in ${xenomaidir}!])
+ fi
+ AC_MSG_RESULT([$xenomaidir])
+fi
+
+AC_SUBST(XENOMAI_DIR,[$xenomaidir])
+AM_CONDITIONAL(ENABLE_XENOMAI, test "x$xeno" = "x1")
+AC_SUBST(ENABLE_XENOMAI,[$xeno])
+
+#------------------------------------------------------------------------------
+# RTDM Interface (optional)
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([rtdm],
+ AC_HELP_STRING(
+ [--enable-rtdm],
+ [Enable RTDM Interface, depends on RTAI or Xenomai]
+ ),
+ [
+ case "${enableval}" in
+ yes) rtdm=1
+ ;;
+ no) rtdm=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-rtdm])
+ ;;
+ esac
+ ],
+ [rtdm=0]
+)
+
+if test "x${rtdm}" = "x1"; then
+ AC_DEFINE([EC_RTDM], [1], [RTDM interfaces enabled])
+fi
+AM_CONDITIONAL(ENABLE_RTDM, test "x$rtdm" = "x1")
+AC_SUBST(ENABLE_RTDM,[$rtdm])
+
#------------------------------------------------------------------------------
# Debug interface
@@ -513,6 +580,31 @@
fi
#------------------------------------------------------------------------------
+# Use 2 datagrams (payload+last-byte) when sending to mailbox (reduces frame size)
+#------------------------------------------------------------------------------
+
+AC_ARG_ENABLE([mboxframesize],
+ AS_HELP_STRING([--enable-mboxframesize],
+ [Reduced frame size when sending to mailbox, uses 2 datagrams (default: no)]),
+ [
+ case "${enableval}" in
+ yes) mboxframesize=1
+ ;;
+ no) mboxframesize=0
+ ;;
+ *) AC_MSG_ERROR([Invalid value for --enable-mboxframesize])
+ ;;
+ esac
+ ],
+ [mboxframesize=0]
+)
+
+if test "x${mboxframesize}" = "x1"; then
+ AC_DEFINE([EC_REDUCE_MBOXFRAMESIZE], [1], [Reduced frame size when sending to mailbox])
+fi
+
+
+#------------------------------------------------------------------------------
# Read alias address from register
#------------------------------------------------------------------------------
@@ -536,6 +628,7 @@
AC_DEFINE([EC_REGALIAS], [1], [Read alias adresses from register])
fi
+
#------------------------------------------------------------------------------
# Command-line tool
#-----------------------------------------------------------------------------
@@ -626,6 +719,9 @@
examples/tty/Kbuild
examples/tty/Makefile
examples/user/Makefile
+ examples/xenomai/Makefile
+ examples/xenomai_posix/Makefile
+ examples/rtai_rtdm/Makefile
include/Makefile
lib/Makefile
m4/Makefile
@@ -638,6 +734,8 @@
tool/Makefile
tty/Kbuild
tty/Makefile
+ rtdm/Makefile
+ rtdm/Kbuild
])
AC_OUTPUT
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.32-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2783 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2009 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/**
+ \file
+ EtherCAT driver for RTL8139-compatible NICs.
+*/
+
+/*****************************************************************************/
+
+/*
+ Former documentation:
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME "ec_8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#include "../globals.h"
+#include "ecdev.h"
+
+#define RTL8139_DRIVER_NAME DRV_NAME \
+ " EtherCAT-capable Fast Ethernet driver " \
+ DRV_VERSION ", master " EC_MASTER_VERSION
+
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+
+/* prevent driver from being loaded automatically */
+//MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+
+ ec_device_t *ecdev;
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("RealTek RTL-8139 EtherCAT driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+void ec_poll(struct net_device *);
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ // offer device to EtherCAT master module
+ tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
+
+ if (!tp->ecdev) {
+ pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+ }
+
+ pci_set_drvdata (pdev, dev);
+
+ pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
+
+ pr_debug("%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
+ dev->name);
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ pr_info(" Forcing %dMbps %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ if (tp->ecdev && ecdev_open(tp->ecdev)) {
+ ecdev_withdraw(tp->ecdev);
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ if (tp->ecdev) {
+ ecdev_close(tp->ecdev);
+ ecdev_withdraw(tp->ecdev);
+ }
+ else {
+ unregister_netdev (dev);
+ }
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!tp->ecdev) {
+ retval = request_irq(dev->irq, rtl8139_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+ }
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ if (!tp->ecdev) free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ if (!tp->ecdev) {
+ if (netif_msg_ifup(tp))
+ pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+ }
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev) {
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 state = RTL_R16(BasicModeStatus) & BMSR_LSTATUS;
+ ecdev_set_link(tp->ecdev, state ? 1 : 0);
+ }
+ else {
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ if (!tp->ecdev)
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = (mii_lpa & LPA_100FULL)
+ || (mii_lpa & 0x01C0) == 0x0040;
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ pr_info("%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n",
+ dev->name,
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ pr_info("%s: media is unconnected, link down, or incompatible connection\n",
+ dev->name);
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, RTL_R16 (NWayLPAR));
+ pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
+ dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+ pr_debug("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, RTL_R8 (Config0),
+ RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+ dev->name, RTL_R8 (ChipCmd),
+ RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
+ dev->name, tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ if (tp->ecdev) {
+ rtl8139_tx_clear (tp);
+ rtl8139_hw_start (dev);
+ }
+ else {
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+ }
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->ecdev && !tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ } else {
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ if (tp->ecdev) {
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+ } else {
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ if (netif_msg_tx_queued(tp))
+ pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ if (netif_msg_tx_err(tp))
+ pr_debug("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (!tp->ecdev && tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ if (!tp->ecdev) netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ if (netif_msg_rx_err (tp))
+ pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ while ((tp->ecdev || netif_running(dev))
+ && received < budget
+ && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ if (!tp->ecdev) {
+ if (netif_msg_rx_status(tp))
+ pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+ }
+#if RTL8139_DEBUG > 2
+ {
+ int i;
+ pr_debug("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ pr_cont(" %2.2x",
+ rx_ring[ring_offset + i]);
+ pr_cont(".\n");
+ }
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ pr_debug("%s: hung FIFO. Reset.", dev->name);
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ if (netif_msg_intr(tp)) {
+ pr_debug("%s: fifo copy in progress.",
+ dev->name);
+ }
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ if (tp->ecdev) {
+ ecdev_receive(tp->ecdev,
+ &rx_ring[ring_offset + 4], pkt_size);
+ dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+ } else {
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+ if (likely(skb)) {
+ skb_reserve (skb, NET_IP_ALIGN); /* 16 byte align the IP fields. */
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ pr_warning("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ }
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ pr_err("%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ __napi_complete(napi);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+void ec_poll(struct net_device *dev)
+{
+ rtl8139_interrupt(0, dev);
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ if (tp->ecdev) {
+ status = RTL_R16 (IntrStatus);
+ }
+ else {
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+ }
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ if (!tp->ecdev) {
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (tp->ecdev) {
+ /* EtherCAT device: Just receive all frames */
+ rtl8139_rx(dev, tp, 100); // FIXME
+ } else {
+ /* Mark for polling */
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ if (!tp->ecdev) spin_unlock (&tp->lock);
+
+ pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev) {
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ } else {
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ if (netif_msg_ifdown(tp))
+ pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+ }
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (tp->ecdev || !netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev || netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int i, rx_mode;
+ u32 tmp;
+
+ pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+ dev->name, dev->flags, RTL_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ pci_restore_state (pdev);
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.32-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2646 @@
+/*
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME "8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+};
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+
+ pci_set_drvdata (pdev, dev);
+
+ pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
+
+ pr_debug("%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
+ dev->name);
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ pr_info(" Forcing %dMbps %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ unregister_netdev (dev);
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ if (netif_msg_ifup(tp))
+ pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = (mii_lpa & LPA_100FULL)
+ || (mii_lpa & 0x01C0) == 0x0040;
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ pr_info("%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n",
+ dev->name,
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ pr_info("%s: media is unconnected, link down, or incompatible connection\n",
+ dev->name);
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, RTL_R16 (NWayLPAR));
+ pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
+ dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+ pr_debug("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, RTL_R8 (Config0),
+ RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+ dev->name, RTL_R8 (ChipCmd),
+ RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
+ dev->name, tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ dev_kfree_skb(skb);
+ } else {
+ dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ if (netif_msg_tx_queued(tp))
+ pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
+
+ return NETDEV_TX_OK;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ if (netif_msg_tx_err(tp))
+ pr_debug("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ if (netif_msg_rx_err (tp))
+ pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ while (netif_running(dev) && received < budget
+ && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ if (netif_msg_rx_status(tp))
+ pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+#if RTL8139_DEBUG > 2
+ {
+ int i;
+ pr_debug("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ pr_cont(" %2.2x",
+ rx_ring[ring_offset + i]);
+ pr_cont(".\n");
+ }
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ pr_debug("%s: hung FIFO. Reset.", dev->name);
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ if (netif_msg_intr(tp)) {
+ pr_debug("%s: fifo copy in progress.",
+ dev->name);
+ }
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+ if (likely(skb)) {
+ skb_reserve (skb, NET_IP_ALIGN); /* 16 byte align the IP fields. */
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ pr_warning("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ pr_err("%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ __napi_complete(napi);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ spin_unlock (&tp->lock);
+
+ pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ if (netif_msg_ifdown(tp))
+ pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int i, rx_mode;
+ u32 tmp;
+
+ pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+ dev->name, dev->flags, RTL_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (!netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ pci_restore_state (pdev);
+ if (!netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2787 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2009 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/**
+ \file
+ EtherCAT driver for RTL8139-compatible NICs.
+*/
+
+/*****************************************************************************/
+
+/*
+ Former documentation:
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME "ec_8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#include "../globals.h"
+#include "ecdev.h"
+
+#define RTL8139_DRIVER_NAME DRV_NAME \
+ " EtherCAT-capable Fast Ethernet driver " \
+ DRV_VERSION ", master " EC_MASTER_VERSION
+
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+
+/* prevent driver from being loaded automatically */
+//MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+
+ ec_device_t *ecdev;
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("RealTek RTL-8139 EtherCAT driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+void ec_poll(struct net_device *);
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ // offer device to EtherCAT master module
+ tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
+
+ if (!tp->ecdev) {
+ pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+ }
+
+ pci_set_drvdata (pdev, dev);
+
+ pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
+
+ pr_debug("%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
+ dev->name);
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ pr_info(" Forcing %dMbps %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ if (tp->ecdev && ecdev_open(tp->ecdev)) {
+ ecdev_withdraw(tp->ecdev);
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ if (tp->ecdev) {
+ ecdev_close(tp->ecdev);
+ ecdev_withdraw(tp->ecdev);
+ }
+ else {
+ unregister_netdev (dev);
+ }
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!tp->ecdev) {
+ retval = request_irq(dev->irq, rtl8139_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+ }
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ if (!tp->ecdev) free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ if (!tp->ecdev) {
+ if (netif_msg_ifup(tp))
+ pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+ }
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev) {
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 state = RTL_R16(BasicModeStatus) & BMSR_LSTATUS;
+ ecdev_set_link(tp->ecdev, state ? 1 : 0);
+ }
+ else {
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ if (!tp->ecdev)
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = ((mii_lpa & LPA_100FULL) ||
+ (mii_lpa & 0x01C0) == 0x0040);
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ pr_info("%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n",
+ dev->name,
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ pr_info("%s: media is unconnected, link down, or incompatible connection\n",
+ dev->name);
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, RTL_R16 (NWayLPAR));
+ pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
+ dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+ pr_debug("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, RTL_R8 (Config0),
+ RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+ dev->name, RTL_R8 (ChipCmd),
+ RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
+ dev->name, tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ if (tp->ecdev) {
+ rtl8139_tx_clear (tp);
+ rtl8139_hw_start (dev);
+ }
+ else {
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+ }
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->ecdev && !tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ } else {
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ if (tp->ecdev) {
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+ } else {
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ if (netif_msg_tx_queued(tp))
+ pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ if (netif_msg_tx_err(tp))
+ pr_debug("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (!tp->ecdev && tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ if (!tp->ecdev) netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ if (netif_msg_rx_err (tp))
+ pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ while ((tp->ecdev || netif_running(dev))
+ && received < budget
+ && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ if (!tp->ecdev) {
+ if (netif_msg_rx_status(tp))
+ pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+ }
+#if RTL8139_DEBUG > 2
+ {
+ int i;
+ pr_debug("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ pr_cont(" %2.2x",
+ rx_ring[ring_offset + i]);
+ pr_cont(".\n");
+ }
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ pr_debug("%s: hung FIFO. Reset.", dev->name);
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ if (netif_msg_intr(tp)) {
+ pr_debug("%s: fifo copy in progress.",
+ dev->name);
+ }
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ if (tp->ecdev) {
+ ecdev_receive(tp->ecdev,
+ &rx_ring[ring_offset + 4], pkt_size);
+ dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+ } else {
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb_ip_align(dev, pkt_size);
+ if (likely(skb)) {
+
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ pr_warning("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ }
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ pr_err("%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ __napi_complete(napi);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+void ec_poll(struct net_device *dev)
+{
+ rtl8139_interrupt(0, dev);
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ if (tp->ecdev) {
+ status = RTL_R16 (IntrStatus);
+ }
+ else {
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+ }
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ if (!tp->ecdev) {
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (tp->ecdev) {
+ /* EtherCAT device: Just receive all frames */
+ rtl8139_rx(dev, tp, 100); // FIXME
+ } else {
+ /* Mark for polling */
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ if (!tp->ecdev) spin_unlock (&tp->lock);
+
+ pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ /*
+ * use _nosync() variant - might be used by netconsole
+ * from atomic contexts:
+ */
+ disable_irq_nosync(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev) {
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ } else {
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ if (netif_msg_ifdown(tp))
+ pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+ }
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (tp->ecdev || !netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev || netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int i, rx_mode;
+ u32 tmp;
+
+ pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+ dev->name, dev->flags, RTL_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ pci_restore_state (pdev);
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2649 @@
+/*
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME "8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static struct pci_device_id rtl8139_pci_tbl[] = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+};
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+
+ pci_set_drvdata (pdev, dev);
+
+ pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
+
+ pr_debug("%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
+ dev->name);
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ pr_info(" Forcing %dMbps %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ unregister_netdev (dev);
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ if (netif_msg_ifup(tp))
+ pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = ((mii_lpa & LPA_100FULL) ||
+ (mii_lpa & 0x01C0) == 0x0040);
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ pr_info("%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n",
+ dev->name,
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ pr_info("%s: media is unconnected, link down, or incompatible connection\n",
+ dev->name);
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, RTL_R16 (NWayLPAR));
+ pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
+ dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+ pr_debug("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, RTL_R8 (Config0),
+ RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+ dev->name, RTL_R8 (ChipCmd),
+ RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
+ dev->name, tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ dev_kfree_skb(skb);
+ } else {
+ dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ dev->trans_start = jiffies;
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ if (netif_msg_tx_queued(tp))
+ pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
+
+ return NETDEV_TX_OK;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ if (netif_msg_tx_err(tp))
+ pr_debug("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ if (netif_msg_rx_err (tp))
+ pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ while (netif_running(dev) && received < budget &&
+ (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ if (netif_msg_rx_status(tp))
+ pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+#if RTL8139_DEBUG > 2
+ {
+ int i;
+ pr_debug("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ pr_cont(" %2.2x",
+ rx_ring[ring_offset + i]);
+ pr_cont(".\n");
+ }
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ pr_debug("%s: hung FIFO. Reset.", dev->name);
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ if (netif_msg_intr(tp)) {
+ pr_debug("%s: fifo copy in progress.",
+ dev->name);
+ }
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb_ip_align(dev, pkt_size);
+ if (likely(skb)) {
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ pr_warning("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ pr_err("%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ __napi_complete(napi);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ spin_unlock (&tp->lock);
+
+ pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ /*
+ * use _nosync() variant - might be used by netconsole
+ * from atomic contexts:
+ */
+ disable_irq_nosync(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ if (netif_msg_ifdown(tp))
+ pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int i, rx_mode;
+ u32 tmp;
+
+ pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+ dev->name, dev->flags, RTL_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (!netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ pci_restore_state (pdev);
+ if (!netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.35-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2780 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2006-2009 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+/**
+ \file
+ EtherCAT driver for RTL8139-compatible NICs.
+*/
+
+/*****************************************************************************/
+
+/*
+ Former documentation:
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define DRV_NAME "ec_8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gfp.h>
+#include <asm/irq.h>
+
+#include "../globals.h"
+#include "ecdev.h"
+
+#define RTL8139_DRIVER_NAME DRV_NAME \
+ " EtherCAT-capable Fast Ethernet driver " \
+ DRV_VERSION ", master " EC_MASTER_VERSION
+
+#define PFX DRV_NAME ": "
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if(unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+
+/* prevent driver from being loaded automatically */
+//MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+
+ ec_device_t *ecdev;
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("RealTek RTL-8139 EtherCAT driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+void ec_poll(struct net_device *);
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static int rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ i = 0;
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ // offer device to EtherCAT master module
+ tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
+
+ if (!tp->ecdev) {
+ pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+ }
+
+ pci_set_drvdata (pdev, dev);
+
+ pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
+ dev->name,
+ board_info[ent->driver_data].name,
+ dev->base_addr,
+ dev->dev_addr,
+ dev->irq);
+
+ pr_debug("%s: Identified 8139 chip type '%s'\n",
+ dev->name, rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
+ dev->name);
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ pr_info(" Forcing %dMbps %s-duplex operation.\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ if (tp->ecdev && ecdev_open(tp->ecdev)) {
+ ecdev_withdraw(tp->ecdev);
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ if (tp->ecdev) {
+ ecdev_close(tp->ecdev);
+ ecdev_withdraw(tp->ecdev);
+ }
+ else {
+ unregister_netdev (dev);
+ }
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ if (!tp->ecdev) {
+ retval = request_irq(dev->irq, rtl8139_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+ }
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ if (!tp->ecdev) free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ if (!tp->ecdev) {
+ if (netif_msg_ifup(tp))
+ pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+ }
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev) {
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 state = RTL_R16(BasicModeStatus) & BMSR_LSTATUS;
+ ecdev_set_link(tp->ecdev, state ? 1 : 0);
+ }
+ else {
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ if (!tp->ecdev)
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = (mii_lpa & LPA_100FULL)
+ || (mii_lpa & 0x01C0) == 0x0040;
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ pr_info("%s: Setting %s-duplex based on MII #%d link"
+ " partner ability of %4.4x.\n",
+ dev->name,
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ pr_info("%s: media is unconnected, link down, or incompatible connection\n",
+ dev->name);
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
+ dev->name, RTL_R16 (NWayLPAR));
+ pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
+ dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
+ pr_debug("%s: Chip config %2.2x %2.2x.\n",
+ dev->name, RTL_R8 (Config0),
+ RTL_R8 (Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+ dev->name, RTL_R8 (ChipCmd),
+ RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
+ dev->name, tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
+ dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ if (tp->ecdev) {
+ rtl8139_tx_clear (tp);
+ rtl8139_hw_start (dev);
+ }
+ else {
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+ }
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->ecdev && !tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ } else {
+ if (!tp->ecdev) dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return 0;
+ }
+
+ if (tp->ecdev) {
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+
+ tp->cur_tx++;
+ } else {
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ if (netif_msg_tx_queued(tp))
+ pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
+ dev->name, len, entry);
+ }
+
+ return 0;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ if (netif_msg_tx_err(tp))
+ pr_debug("%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (!tp->ecdev && tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ if (!tp->ecdev) netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ if (netif_msg_rx_err (tp))
+ pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
+ dev->name, rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
+ dev->name, rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ pr_warning(PFX "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ pr_debug("init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ while ((tp->ecdev || netif_running(dev))
+ && received < budget
+ && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ if (!tp->ecdev) {
+ if (netif_msg_rx_status(tp))
+ pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
+ " cur %4.4x.\n", dev->name, rx_status,
+ rx_size, cur_rx);
+ }
+#if RTL8139_DEBUG > 2
+ {
+ int i;
+ pr_debug("%s: Frame contents ", dev->name);
+ for (i = 0; i < 70; i++)
+ pr_cont(" %2.2x",
+ rx_ring[ring_offset + i]);
+ pr_cont(".\n");
+ }
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ pr_debug("%s: hung FIFO. Reset.", dev->name);
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ if (netif_msg_intr(tp)) {
+ pr_debug("%s: fifo copy in progress.",
+ dev->name);
+ }
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ if (tp->ecdev) {
+ ecdev_receive(tp->ecdev,
+ &rx_ring[ring_offset + 4], pkt_size);
+ dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+ } else {
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+ if (likely(skb)) {
+ skb_reserve (skb, NET_IP_ALIGN); /* 16 byte align the IP fields. */
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ pr_warning("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ }
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+ " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
+ RTL_R16 (RxBufAddr),
+ RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
+ dev->name, status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ pr_err("%s: PCI Bus error %4.4x.\n",
+ dev->name, pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ __napi_complete(napi);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+void ec_poll(struct net_device *dev)
+{
+ rtl8139_interrupt(0, dev);
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ if (tp->ecdev) {
+ status = RTL_R16 (IntrStatus);
+ }
+ else {
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+ }
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ if (!tp->ecdev) {
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (tp->ecdev) {
+ /* EtherCAT device: Just receive all frames */
+ rtl8139_rx(dev, tp, 100); // FIXME
+ } else {
+ /* Mark for polling */
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ if (!tp->ecdev) spin_unlock (&tp->lock);
+
+ pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev) {
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ } else {
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ if (netif_msg_ifdown(tp))
+ pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
+ dev->name, RTL_R16 (IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+ }
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (tp->ecdev || !netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (tp->ecdev || netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int rx_mode;
+ u32 tmp;
+
+ pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+ dev->name, dev->flags, RTL_R32 (RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct netdev_hw_addr *ha;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ pci_restore_state (pdev);
+ if (tp->ecdev || !netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/8139too-2.6.35-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2619 @@
+/*
+
+ 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000-2002 Jeff Garzik
+
+ Much code comes from Donald Becker's rtl8139.c driver,
+ versions 1.13 and older. This driver was originally based
+ on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
+
+ -----<snip>-----
+
+ Written 1997-2001 by Donald Becker.
+ This software may be used and distributed according to the
+ terms of the GNU General Public License (GPL), incorporated
+ herein by reference. Drivers based on or derived from this
+ code fall under the GPL and must retain the authorship,
+ copyright and license notice. This file is not a complete
+ program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for boards based on the RTL8129 and RTL8139
+ PCI ethernet chips.
+
+ The author may be reached as becker@scyld.com, or C/O Scyld
+ Computing Corporation 410 Severn Ave., Suite 210 Annapolis
+ MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/rtl8139.html
+
+ Twister-tuning table provided by Kinston
+ <shangh@realtek.com.tw>.
+
+ -----<snip>-----
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Contributors:
+
+ Donald Becker - he wrote the original driver, kudos to him!
+ (but please don't e-mail him for support, this isn't his driver)
+
+ Tigran Aivazian - bug fixes, skbuff free cleanup
+
+ Martin Mares - suggestions for PCI cleanup
+
+ David S. Miller - PCI DMA and softnet updates
+
+ Ernst Gill - fixes ported from BSD driver
+
+ Daniel Kobras - identified specific locations of
+ posted MMIO write bugginess
+
+ Gerard Sharp - bug fix, testing and feedback
+
+ David Ford - Rx ring wrap fix
+
+ Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
+ to find and fix a crucial bug on older chipsets.
+
+ Donald Becker/Chris Butterworth/Marcus Westergren -
+ Noticed various Rx packet size-related buglets.
+
+ Santiago Garcia Mantinan - testing and feedback
+
+ Jens David - 2.2.x kernel backports
+
+ Martin Dennett - incredibly helpful insight on undocumented
+ features of the 8139 chips
+
+ Jean-Jacques Michel - bug fix
+
+ Tobias Ringström - Rx interrupt status checking suggestion
+
+ Andrew Morton - Clear blocked signals, avoid
+ buffer overrun setting current->comm.
+
+ Kalle Olavi Niemitalo - Wake-on-LAN ioctls
+
+ Robert Kuebel - Save kernel thread from dying on any signal.
+
+ Submitting bug reports:
+
+ "rtl8139-diag -mmmaaavvveefN" output
+ enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "8139too"
+#define DRV_VERSION "0.9.28"
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/completion.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gfp.h>
+#include <asm/irq.h>
+
+#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
+
+/* Default Message level */
+#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK)
+
+
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
+
+/* define to 1 to disable lightweight runtime debugging checks */
+#undef RTL8139_NDEBUG
+
+
+#ifdef RTL8139_NDEBUG
+# define assert(expr) do {} while (0)
+#else
+# define assert(expr) \
+ if (unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
+#endif
+
+
+/* A few user-configurable values. */
+/* media options */
+#define MAX_UNITS 8
+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* bitmapped message enable number */
+static int debug = -1;
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#if defined(CONFIG_SH_DREAMCAST)
+#define RX_BUF_IDX 0 /* 8K ring */
+#else
+#define RX_BUF_IDX 2 /* 32K ring */
+#endif
+#define RX_BUF_LEN (8192 << RX_BUF_IDX)
+#define RX_BUF_PAD 16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (6*HZ)
+
+
+enum {
+ HAS_MII_XCVR = 0x010000,
+ HAS_CHIP_XCVR = 0x020000,
+ HAS_LNK_CHNG = 0x040000,
+};
+
+#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
+#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
+#define RTL_MIN_IO_SIZE 0x80
+#define RTL8139B_IO_SIZE 256
+
+#define RTL8129_CAPS HAS_MII_XCVR
+#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
+
+typedef enum {
+ RTL8139 = 0,
+ RTL8129,
+} board_t;
+
+
+/* indexed by board_t, above */
+static const struct {
+ const char *name;
+ u32 hw_flags;
+} board_info[] __devinitdata = {
+ { "RealTek RTL8139", RTL8139_CAPS },
+ { "RealTek RTL8129", RTL8129_CAPS },
+};
+
+
+static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
+ {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+ {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+ /* Bogus 8139 silicon reports 8129 without external PROM :-( */
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
+#endif
+#ifdef CONFIG_8139TOO_8129
+ {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
+#endif
+
+ /* some crazy cards report invalid vendor ids like
+ * 0x0001 here. The other ids are valid and constant,
+ * so we simply don't match on the main vendor id.
+ */
+ {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
+ {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
+
+ {0,}
+};
+MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "early_rx" },
+ { "tx_buf_mapped" },
+ { "tx_timeouts" },
+ { "rx_lost_in_ring" },
+};
+
+/* The rest of these values should never change. */
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAR0 = 8, /* Multicast filter. */
+ TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
+ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf = 0x30,
+ ChipCmd = 0x37,
+ RxBufPtr = 0x38,
+ RxBufAddr = 0x3A,
+ IntrMask = 0x3C,
+ IntrStatus = 0x3E,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ Timer = 0x48, /* A general-purpose counter. */
+ RxMissed = 0x4C, /* 24 bits valid, write clears. */
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ TimerInt = 0x54,
+ MediaStatus = 0x58,
+ Config3 = 0x59,
+ Config4 = 0x5A, /* absent on RTL-8139A */
+ HltClk = 0x5B,
+ MultiIntr = 0x5C,
+ TxSummary = 0x60,
+ BasicModeCtrl = 0x62,
+ BasicModeStatus = 0x64,
+ NWayAdvert = 0x66,
+ NWayLPAR = 0x68,
+ NWayExpansion = 0x6A,
+ /* Undocumented registers, but required for proper operation. */
+ FIFOTMS = 0x70, /* FIFO Control and test. */
+ CSCR = 0x74, /* Chip Status and Configuration Register. */
+ PARA78 = 0x78,
+ FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
+ PARA7c = 0x7c, /* Magic transceiver parameter register. */
+ Config5 = 0xD8, /* absent on RTL-8139A */
+};
+
+enum ClearBitMasks {
+ MultiIntrClear = 0xF000,
+ ChipCmdClear = 0xE2,
+ Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+};
+
+enum ChipCmdBits {
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+};
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr = 0x8000,
+ PCSTimeout = 0x4000,
+ RxFIFOOver = 0x40,
+ RxUnderrun = 0x20,
+ RxOverflow = 0x10,
+ TxErr = 0x08,
+ TxOK = 0x04,
+ RxErr = 0x02,
+ RxOK = 0x01,
+
+ RxAckBits = RxFIFOOver | RxOverflow | RxOK,
+};
+
+enum TxStatusBits {
+ TxHostOwns = 0x2000,
+ TxUnderrun = 0x4000,
+ TxStatOK = 0x8000,
+ TxOutOfWindow = 0x20000000,
+ TxAborted = 0x40000000,
+ TxCarrierLost = 0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast = 0x8000,
+ RxPhysical = 0x4000,
+ RxBroadcast = 0x2000,
+ RxBadSymbol = 0x0020,
+ RxRunt = 0x0010,
+ RxTooLong = 0x0008,
+ RxCRCErr = 0x0004,
+ RxBadAlign = 0x0002,
+ RxStatusOK = 0x0001,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+};
+
+/* Bits in TxConfig. */
+enum tx_config_bits {
+ /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+ TxIFGShift = 24,
+ TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+ TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+ TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+ TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+ TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
+ TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
+ TxClearAbt = (1 << 0), /* Clear abort (WO) */
+ TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
+ TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
+
+ TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+/* Bits in Config1 */
+enum Config1Bits {
+ Cfg1_PM_Enable = 0x01,
+ Cfg1_VPD_Enable = 0x02,
+ Cfg1_PIO = 0x04,
+ Cfg1_MMIO = 0x08,
+ LWAKE = 0x10, /* not on 8139, 8139A */
+ Cfg1_Driver_Load = 0x20,
+ Cfg1_LED0 = 0x40,
+ Cfg1_LED1 = 0x80,
+ SLEEP = (1 << 1), /* only on 8139, 8139A */
+ PWRDN = (1 << 0), /* only on 8139, 8139A */
+};
+
+/* Bits in Config3 */
+enum Config3Bits {
+ Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
+ Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
+ Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
+ Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
+ Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
+ Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
+ Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
+ Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
+};
+
+/* Bits in Config4 */
+enum Config4Bits {
+ LWPTN = (1 << 2), /* not on 8139, 8139A */
+};
+
+/* Bits in Config5 */
+enum Config5Bits {
+ Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
+ Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
+ Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
+ Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
+ Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
+ Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
+ Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
+};
+
+enum RxConfigBits {
+ /* rx fifo threshold */
+ RxCfgFIFOShift = 13,
+ RxCfgFIFONone = (7 << RxCfgFIFOShift),
+
+ /* Max DMA burst */
+ RxCfgDMAShift = 8,
+ RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
+
+ /* rx ring buffer length */
+ RxCfgRcv8K = 0,
+ RxCfgRcv16K = (1 << 11),
+ RxCfgRcv32K = (1 << 12),
+ RxCfgRcv64K = (1 << 11) | (1 << 12),
+
+ /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+ RxNoWrap = (1 << 7),
+};
+
+/* Twister tuning parameters from RealTek.
+ Completely undocumented, but required to tune bad links on some boards. */
+enum CSCRBits {
+ CSCR_LinkOKBit = 0x0400,
+ CSCR_LinkChangeBit = 0x0800,
+ CSCR_LinkStatusBits = 0x0f000,
+ CSCR_LinkDownOffCmd = 0x003c0,
+ CSCR_LinkDownCmd = 0x0f3c0,
+};
+
+enum Cfg9346Bits {
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xC0,
+};
+
+typedef enum {
+ CH_8139 = 0,
+ CH_8139_K,
+ CH_8139A,
+ CH_8139A_G,
+ CH_8139B,
+ CH_8130,
+ CH_8139C,
+ CH_8100,
+ CH_8100B_8139D,
+ CH_8101,
+} chip_t;
+
+enum chip_flags {
+ HasHltClk = (1 << 0),
+ HasLWake = (1 << 1),
+};
+
+#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
+ (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
+#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
+
+/* directly indexed by chip_t, above */
+static const struct {
+ const char *name;
+ u32 version; /* from RTL8139C/RTL8139D docs */
+ u32 flags;
+} rtl_chip_info[] = {
+ { "RTL-8139",
+ HW_REVID(1, 0, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139 rev K",
+ HW_REVID(1, 1, 0, 0, 0, 0, 0),
+ HasHltClk,
+ },
+
+ { "RTL-8139A",
+ HW_REVID(1, 1, 1, 0, 0, 0, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139A rev G",
+ HW_REVID(1, 1, 1, 0, 0, 1, 0),
+ HasHltClk, /* XXX undocumented? */
+ },
+
+ { "RTL-8139B",
+ HW_REVID(1, 1, 1, 1, 0, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8130",
+ HW_REVID(1, 1, 1, 1, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8139C",
+ HW_REVID(1, 1, 1, 0, 1, 0, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100",
+ HW_REVID(1, 1, 1, 1, 0, 1, 0),
+ HasLWake,
+ },
+
+ { "RTL-8100B/8139D",
+ HW_REVID(1, 1, 1, 0, 1, 0, 1),
+ HasHltClk /* XXX undocumented? */
+ | HasLWake,
+ },
+
+ { "RTL-8101",
+ HW_REVID(1, 1, 1, 0, 1, 1, 1),
+ HasLWake,
+ },
+};
+
+struct rtl_extra_stats {
+ unsigned long early_rx;
+ unsigned long tx_buf_mapped;
+ unsigned long tx_timeouts;
+ unsigned long rx_lost_in_ring;
+};
+
+struct rtl8139_private {
+ void __iomem *mmio_addr;
+ int drv_flags;
+ struct pci_dev *pci_dev;
+ u32 msg_enable;
+ struct napi_struct napi;
+ struct net_device *dev;
+
+ unsigned char *rx_ring;
+ unsigned int cur_rx; /* RX buf index of next pkt */
+ dma_addr_t rx_ring_dma;
+
+ unsigned int tx_flag;
+ unsigned long cur_tx;
+ unsigned long dirty_tx;
+ unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
+ dma_addr_t tx_bufs_dma;
+
+ signed char phys[4]; /* MII device addresses. */
+
+ /* Twister tune state. */
+ char twistie, twist_row, twist_col;
+
+ unsigned int watchdog_fired : 1;
+ unsigned int default_port : 4; /* Last dev->if_port value. */
+ unsigned int have_thread : 1;
+
+ spinlock_t lock;
+ spinlock_t rx_lock;
+
+ chip_t chipset;
+ u32 rx_config;
+ struct rtl_extra_stats xstats;
+
+ struct delayed_work thread;
+
+ struct mii_if_info mii;
+ unsigned int regs_len;
+ unsigned long fifo_copy_timeout;
+};
+
+MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
+module_param(multicast_filter_limit, int, 0);
+module_param_array(media, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(debug, int, 0);
+MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+
+static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
+static int rtl8139_open (struct net_device *dev);
+static int mdio_read (struct net_device *dev, int phy_id, int location);
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int val);
+static void rtl8139_start_thread(struct rtl8139_private *tp);
+static void rtl8139_tx_timeout (struct net_device *dev);
+static void rtl8139_init_ring (struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rtl8139_poll_controller(struct net_device *dev);
+#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
+static int rtl8139_poll(struct napi_struct *napi, int budget);
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
+static int rtl8139_close (struct net_device *dev);
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
+static void rtl8139_set_rx_mode (struct net_device *dev);
+static void __set_rx_mode (struct net_device *dev);
+static void rtl8139_hw_start (struct net_device *dev);
+static void rtl8139_thread (struct work_struct *work);
+static void rtl8139_tx_timeout_task(struct work_struct *work);
+static const struct ethtool_ops rtl8139_ethtool_ops;
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
+#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
+#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
+
+/* write MMIO register */
+#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
+
+/* read MMIO register */
+#define RTL_R8(reg) ioread8 (ioaddr + (reg))
+#define RTL_R16(reg) ioread16 (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
+
+
+static const u16 rtl8139_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+ TxErr | TxOK | RxErr | RxOK;
+
+static const u16 rtl8139_norx_intr_mask =
+ PCIErr | PCSTimeout | RxUnderrun |
+ TxErr | TxOK | RxErr ;
+
+#if RX_BUF_IDX == 0
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv8K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 1
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv16K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 2
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#elif RX_BUF_IDX == 3
+static const unsigned int rtl8139_rx_config =
+ RxCfgRcv64K |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
+#else
+#error "Invalid configuration for 8139_RXBUF_IDX"
+#endif
+
+static const unsigned int rtl8139_tx_config =
+ TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void __rtl8139_cleanup_dev (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev;
+
+ assert (dev != NULL);
+ assert (tp->pci_dev != NULL);
+ pdev = tp->pci_dev;
+
+ if (tp->mmio_addr)
+ pci_iounmap (pdev, tp->mmio_addr);
+
+ /* it's ok to call this even if we have no regions to free */
+ pci_release_regions (pdev);
+
+ free_netdev(dev);
+ pci_set_drvdata (pdev, NULL);
+}
+
+
+static void rtl8139_chip_reset (void __iomem *ioaddr)
+{
+ int i;
+
+ /* Soft reset the chip. */
+ RTL_W8 (ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 1000; i > 0; i--) {
+ barrier();
+ if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
+ break;
+ udelay (10);
+ }
+}
+
+
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
+{
+ void __iomem *ioaddr;
+ struct net_device *dev;
+ struct rtl8139_private *tp;
+ u8 tmp8;
+ int rc, disable_dev_on_err = 0;
+ unsigned int i;
+ unsigned long pio_start, pio_end, pio_flags, pio_len;
+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ u32 version;
+
+ assert (pdev != NULL);
+
+ /* dev and priv zeroed in alloc_etherdev */
+ dev = alloc_etherdev (sizeof (*tp));
+ if (dev == NULL) {
+ dev_err(&pdev->dev, "Unable to alloc new net device\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->pci_dev = pdev;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device (pdev);
+ if (rc)
+ goto err_out;
+
+ pio_start = pci_resource_start (pdev, 0);
+ pio_end = pci_resource_end (pdev, 0);
+ pio_flags = pci_resource_flags (pdev, 0);
+ pio_len = pci_resource_len (pdev, 0);
+
+ mmio_start = pci_resource_start (pdev, 1);
+ mmio_end = pci_resource_end (pdev, 1);
+ mmio_flags = pci_resource_flags (pdev, 1);
+ mmio_len = pci_resource_len (pdev, 1);
+
+ /* set this immediately, we need to know before
+ * we talk to the chip directly */
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
+
+retry:
+ if (use_io) {
+ /* make sure PCI base addr 0 is PIO */
+ if (!(pio_flags & IORESOURCE_IO)) {
+ dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ /* check for weird/broken PCI region reporting */
+ if (pio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ } else {
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(mmio_flags & IORESOURCE_MEM)) {
+ dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ if (mmio_len < RTL_MIN_IO_SIZE) {
+ dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+ rc = -ENODEV;
+ goto err_out;
+ }
+ }
+
+ rc = pci_request_regions (pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+ disable_dev_on_err = 1;
+
+ /* enable PCI bus-mastering */
+ pci_set_master (pdev);
+
+ if (use_io) {
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+ rc = -EIO;
+ goto err_out;
+ }
+ dev->base_addr = pio_start;
+ tp->regs_len = pio_len;
+ } else {
+ /* ioremap MMIO region */
+ ioaddr = pci_iomap(pdev, 1, 0);
+ if (ioaddr == NULL) {
+ dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+ pci_release_regions(pdev);
+ use_io = 1;
+ goto retry;
+ }
+ dev->base_addr = (long) ioaddr;
+ tp->regs_len = mmio_len;
+ }
+ tp->mmio_addr = ioaddr;
+
+ /* Bring old chips out of low-power mode. */
+ RTL_W8 (HltClk, 'R');
+
+ /* check for missing/broken hardware */
+ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
+ dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
+ rc = -EIO;
+ goto err_out;
+ }
+
+ /* identify chip attached to board */
+ version = RTL_R32 (TxConfig) & HW_REVID_MASK;
+ for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
+ if (version == rtl_chip_info[i].version) {
+ tp->chipset = i;
+ goto match;
+ }
+
+ /* if unknown chip, assume array element #0, original RTL-8139 in this case */
+ i = 0;
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ tp->chipset = 0;
+
+match:
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
+ version, i, rtl_chip_info[i].name);
+
+ if (tp->chipset >= CH_8139B) {
+ u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
+ pr_debug("PCI PM wakeup\n");
+ if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
+ (tmp8 & LWAKE))
+ new_tmp8 &= ~LWAKE;
+ new_tmp8 |= Cfg1_PM_Enable;
+ if (new_tmp8 != tmp8) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tmp8);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ tmp8 = RTL_R8 (Config4);
+ if (tmp8 & LWPTN) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config4, tmp8 & ~LWPTN);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ }
+ }
+ } else {
+ pr_debug("Old chip wakeup\n");
+ tmp8 = RTL_R8 (Config1);
+ tmp8 &= ~(SLEEP | PWRDN);
+ RTL_W8 (Config1, tmp8);
+ }
+
+ rtl8139_chip_reset (ioaddr);
+
+ return dev;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ if (disable_dev_on_err)
+ pci_disable_device (pdev);
+ return ERR_PTR(rc);
+}
+
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
+
+static int __devinit rtl8139_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct rtl8139_private *tp;
+ int i, addr_len, option;
+ void __iomem *ioaddr;
+ static int board_idx = -1;
+
+ assert (pdev != NULL);
+ assert (ent != NULL);
+
+ board_idx++;
+
+ /* when we're built into the kernel, the driver version message
+ * is only printed if at least one 8139 board has been found
+ */
+#ifndef MODULE
+ {
+ static int printed_version;
+ if (!printed_version++)
+ pr_info(RTL8139_DRIVER_NAME "\n");
+ }
+#endif
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
+ dev_info(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
+ pdev->vendor, pdev->device, pdev->revision);
+ return -ENODEV;
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+ pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+ pr_info("OQO Model 2 detected. Forcing PIO\n");
+ use_io = 1;
+ }
+
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ assert (dev != NULL);
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+
+ ioaddr = tp->mmio_addr;
+ assert (ioaddr != NULL);
+
+ addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ ((__le16 *) (dev->dev_addr))[i] =
+ cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* The Rtl8139-specific entries in the device structure. */
+ dev->netdev_ops = &rtl8139_netdev_ops;
+ dev->ethtool_ops = &rtl8139_ethtool_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
+
+ /* note: the hardware is not capable of sg/csum/highdma, however
+ * through the use of skb_copy_and_csum_dev we enable these
+ * features
+ */
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->irq = pdev->irq;
+
+ /* tp zeroed and aligned in alloc_etherdev */
+ tp = netdev_priv(dev);
+
+ /* note: tp->chipset set in rtl8139_init_board */
+ tp->drv_flags = board_info[ent->driver_data].hw_flags;
+ tp->mmio_addr = ioaddr;
+ tp->msg_enable =
+ (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
+ spin_lock_init (&tp->lock);
+ spin_lock_init (&tp->rx_lock);
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ tp->mii.dev = dev;
+ tp->mii.mdio_read = mdio_read;
+ tp->mii.mdio_write = mdio_write;
+ tp->mii.phy_id_mask = 0x3f;
+ tp->mii.reg_num_mask = 0x1f;
+
+ /* dev is fully set up and ready to use now */
+ pr_debug("about to register device named %s (%p)...\n",
+ dev->name, dev);
+ i = register_netdev (dev);
+ if (i) goto err_out;
+
+ pci_set_drvdata (pdev, dev);
+
+ netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+ board_info[ent->driver_data].name,
+ dev->base_addr, dev->dev_addr, dev->irq);
+
+ netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
+ rtl_chip_info[tp->chipset].name);
+
+ /* Find the connected MII xcvrs.
+ Doing this in open() would allow detecting external xcvrs later, but
+ takes too much time. */
+#ifdef CONFIG_8139TOO_8129
+ if (tp->drv_flags & HAS_MII_XCVR) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
+ int mii_status = mdio_read(dev, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ u16 advertising = mdio_read(dev, phy, 4);
+ tp->phys[phy_idx++] = phy;
+ netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
+ phy, mii_status, advertising);
+ }
+ }
+ if (phy_idx == 0) {
+ netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
+ tp->phys[0] = 32;
+ }
+ } else
+#endif
+ tp->phys[0] = 32;
+ tp->mii.phy_id = tp->phys[0];
+
+ /* The lower four bits are the media type. */
+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
+ if (option > 0) {
+ tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
+ tp->default_port = option & 0xFF;
+ if (tp->default_port)
+ tp->mii.force_media = 1;
+ }
+ if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
+ tp->mii.full_duplex = full_duplex[board_idx];
+ if (tp->mii.full_duplex) {
+ netdev_info(dev, "Media type forced to Full Duplex\n");
+ /* Changing the MII-advertised media because might prevent
+ re-connection. */
+ tp->mii.force_media = 1;
+ }
+ if (tp->default_port) {
+ netdev_info(dev, " Forcing %dMbps %s-duplex operation\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
+ mdio_write(dev, tp->phys[0], 0,
+ ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
+ ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
+ }
+
+ /* Put the chip into low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+
+err_out:
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+ return i;
+}
+
+
+static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ assert (dev != NULL);
+
+ flush_scheduled_work();
+
+ unregister_netdev (dev);
+
+ __rtl8139_cleanup_dev (dev);
+ pci_disable_device (pdev);
+}
+
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+ */
+
+#define eeprom_delay() (void)RTL_R32(Cfg9346)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ unsigned retval = 0;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ RTL_W8 (Cfg9346, EE_ENB | dataval);
+ eeprom_delay ();
+ RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
+ eeprom_delay ();
+ }
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+
+ for (i = 16; i > 0; i--) {
+ RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
+ eeprom_delay ();
+ retval =
+ (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
+ 0);
+ RTL_W8 (Cfg9346, EE_ENB);
+ eeprom_delay ();
+ }
+
+ /* Terminate the EEPROM access. */
+ RTL_W8 (Cfg9346, ~EE_CS);
+ eeprom_delay ();
+
+ return retval;
+}
+
+/* MII serial management: mostly bogus for now. */
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol.
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+#define MDIO_DIR 0x80
+#define MDIO_DATA_OUT 0x04
+#define MDIO_DATA_IN 0x02
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+
+#define mdio_delay() RTL_R8(Config4)
+
+
+static const char mii_2_8139_map[8] = {
+ BasicModeCtrl,
+ BasicModeStatus,
+ 0,
+ 0,
+ NWayAdvert,
+ NWayLPAR,
+ NWayExpansion,
+ 0
+};
+
+
+#ifdef CONFIG_8139TOO_8129
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_sync (void __iomem *ioaddr)
+{
+ int i;
+
+ for (i = 32; i >= 0; i--) {
+ RTL_W8 (Config4, MDIO_WRITE1);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
+ mdio_delay ();
+ }
+}
+#endif
+
+static int mdio_read (struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval = 0;
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ return location < 8 && mii_2_8139_map[location] ?
+ RTL_R16 (mii_2_8139_map[location]) : 0;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
+
+ RTL_W8 (Config4, MDIO_DIR | dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+
+ return (retval >> 1) & 0xffff;
+}
+
+
+static void mdio_write (struct net_device *dev, int phy_id, int location,
+ int value)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+#ifdef CONFIG_8139TOO_8129
+ void __iomem *ioaddr = tp->mmio_addr;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ int i;
+#endif
+
+ if (phy_id > 31) { /* Really a 8139. Use internal registers. */
+ void __iomem *ioaddr = tp->mmio_addr;
+ if (location == 0) {
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W16 (BasicModeCtrl, value);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+ } else if (location < 8 && mii_2_8139_map[location])
+ RTL_W16 (mii_2_8139_map[location], value);
+ return;
+ }
+
+#ifdef CONFIG_8139TOO_8129
+ mdio_sync (ioaddr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval =
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ RTL_W8 (Config4, dataval);
+ mdio_delay ();
+ RTL_W8 (Config4, dataval | MDIO_CLK);
+ mdio_delay ();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ RTL_W8 (Config4, 0);
+ mdio_delay ();
+ RTL_W8 (Config4, MDIO_CLK);
+ mdio_delay ();
+ }
+#endif
+}
+
+
+static int rtl8139_open (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int retval;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
+ if (retval)
+ return retval;
+
+ tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ &tp->tx_bufs_dma, GFP_KERNEL);
+ tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ &tp->rx_ring_dma, GFP_KERNEL);
+ if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
+ free_irq(dev->irq, dev);
+
+ if (tp->tx_bufs)
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ if (tp->rx_ring)
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+
+ return -ENOMEM;
+
+ }
+
+ napi_enable(&tp->napi);
+
+ tp->mii.full_duplex = tp->mii.force_media;
+ tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_start_queue (dev);
+
+ netif_dbg(tp, ifup, dev,
+ "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+ __func__,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
+
+ rtl8139_start_thread(tp);
+
+ return 0;
+}
+
+
+static void rtl_check_media (struct net_device *dev, unsigned int init_media)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ if (tp->phys[0] >= 0) {
+ mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
+ }
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 i;
+ u8 tmp;
+
+ /* Bring old chips out of low-power mode. */
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'R');
+
+ rtl8139_chip_reset (ioaddr);
+
+ /* unlock Config[01234] and BMCR register writes */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Restore our idea of the MAC address. */
+ RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+ RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ RTL_W32 (TxConfig, rtl8139_tx_config);
+
+ rtl_check_media (dev, 1);
+
+ if (tp->chipset >= CH_8139B) {
+ /* Disable magic packet scanning, which is enabled
+ * when PM is enabled in Config1. It can be reenabled
+ * via ETHTOOL_SWOL if desired. */
+ RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
+ }
+
+ netdev_dbg(dev, "init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Tx buffer DMA addresses */
+ for (i = 0; i < NUM_TX_DESC; i++)
+ RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+
+ RTL_W32 (RxMissed, 0);
+
+ rtl8139_set_rx_mode (dev);
+
+ /* no early-rx interrupts */
+ RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
+
+ /* make sure RxTx has started */
+ tmp = RTL_R8 (ChipCmd);
+ if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16 (IntrMask, rtl8139_intr_mask);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int i;
+
+ tp->cur_rx = 0;
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++)
+ tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
+}
+
+
+/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
+static int next_tick = 3 * HZ;
+
+#ifndef CONFIG_8139TOO_TUNE_TWISTER
+static inline void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp) {}
+#else
+enum TwisterParamVals {
+ PARA78_default = 0x78fa8388,
+ PARA7c_default = 0xcb38de43, /* param[0][3] */
+ PARA7c_xxx = 0xcb38de43,
+};
+
+static const unsigned long param[4][4] = {
+ {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
+ {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
+};
+
+static void rtl8139_tune_twister (struct net_device *dev,
+ struct rtl8139_private *tp)
+{
+ int linkcase;
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ /* This is a complicated state machine to configure the "twister" for
+ impedance/echos based on the cable length.
+ All of this is magic and undocumented.
+ */
+ switch (tp->twistie) {
+ case 1:
+ if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
+ /* We have link beat, let us tune the twister. */
+ RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
+ tp->twistie = 2; /* Change to state 2. */
+ next_tick = HZ / 10;
+ } else {
+ /* Just put in some reasonable defaults for when beat returns. */
+ RTL_W16 (CSCR, CSCR_LinkDownCmd);
+ RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ tp->twistie = 0; /* Bail from future actions. */
+ }
+ break;
+ case 2:
+ /* Read how long it took to hear the echo. */
+ linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
+ if (linkcase == 0x7000)
+ tp->twist_row = 3;
+ else if (linkcase == 0x3000)
+ tp->twist_row = 2;
+ else if (linkcase == 0x1000)
+ tp->twist_row = 1;
+ else
+ tp->twist_row = 0;
+ tp->twist_col = 0;
+ tp->twistie = 3; /* Change to state 2. */
+ next_tick = HZ / 10;
+ break;
+ case 3:
+ /* Put out four tuning parameters, one per 100msec. */
+ if (tp->twist_col == 0)
+ RTL_W16 (FIFOTMS, 0);
+ RTL_W32 (PARA7c, param[(int) tp->twist_row]
+ [(int) tp->twist_col]);
+ next_tick = HZ / 10;
+ if (++tp->twist_col >= 4) {
+ /* For short cables we are done.
+ For long cables (row == 3) check for mistune. */
+ tp->twistie =
+ (tp->twist_row == 3) ? 4 : 0;
+ }
+ break;
+ case 4:
+ /* Special case for long cables: check for mistune. */
+ if ((RTL_R16 (CSCR) &
+ CSCR_LinkStatusBits) == 0x7000) {
+ tp->twistie = 0;
+ break;
+ } else {
+ RTL_W32 (PARA7c, 0xfb38de03);
+ tp->twistie = 5;
+ next_tick = HZ / 10;
+ }
+ break;
+ case 5:
+ /* Retune for shorter cable (column 2). */
+ RTL_W32 (FIFOTMS, 0x20);
+ RTL_W32 (PARA78, PARA78_default);
+ RTL_W32 (PARA7c, PARA7c_default);
+ RTL_W32 (FIFOTMS, 0x00);
+ tp->twist_row = 2;
+ tp->twist_col = 0;
+ tp->twistie = 3;
+ next_tick = HZ / 10;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+}
+#endif /* CONFIG_8139TOO_TUNE_TWISTER */
+
+static inline void rtl8139_thread_iter (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ int mii_lpa;
+
+ mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+
+ if (!tp->mii.force_media && mii_lpa != 0xffff) {
+ int duplex = ((mii_lpa & LPA_100FULL) ||
+ (mii_lpa & 0x01C0) == 0x0040);
+ if (tp->mii.full_duplex != duplex) {
+ tp->mii.full_duplex = duplex;
+
+ if (mii_lpa) {
+ netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ } else {
+ netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
+ }
+#if 0
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+#endif
+ }
+ }
+
+ next_tick = HZ * 60;
+
+ rtl8139_tune_twister (dev, tp);
+
+ netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+ RTL_R16(NWayLPAR));
+ netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
+ RTL_R16(IntrMask), RTL_R16(IntrStatus));
+ netdev_dbg(dev, "Chip config %02x %02x\n",
+ RTL_R8(Config0), RTL_R8(Config1));
+}
+
+static void rtl8139_thread (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ unsigned long thr_delay = next_tick;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ if (tp->watchdog_fired) {
+ tp->watchdog_fired = 0;
+ rtl8139_tx_timeout_task(work);
+ } else
+ rtl8139_thread_iter(dev, tp, tp->mmio_addr);
+
+ if (tp->have_thread)
+ schedule_delayed_work(&tp->thread, thr_delay);
+out_unlock:
+ rtnl_unlock ();
+}
+
+static void rtl8139_start_thread(struct rtl8139_private *tp)
+{
+ tp->twistie = 0;
+ if (tp->chipset == CH_8139_K)
+ tp->twistie = 1;
+ else if (tp->drv_flags & HAS_LNK_CHNG)
+ return;
+
+ tp->have_thread = 1;
+ tp->watchdog_fired = 0;
+
+ schedule_delayed_work(&tp->thread, next_tick);
+}
+
+static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
+{
+ tp->cur_tx = 0;
+ tp->dirty_tx = 0;
+
+ /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+static void rtl8139_tx_timeout_task (struct work_struct *work)
+{
+ struct rtl8139_private *tp =
+ container_of(work, struct rtl8139_private, thread.work);
+ struct net_device *dev = tp->mii.dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int i;
+ u8 tmp8;
+
+ netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
+ RTL_R8(ChipCmd), RTL_R16(IntrStatus),
+ RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ /* Emit info to figure out what went wrong. */
+ netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n",
+ tp->cur_tx, tp->dirty_tx);
+ for (i = 0; i < NUM_TX_DESC; i++)
+ netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+ i, RTL_R32(TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
+
+ tp->xstats.tx_timeouts++;
+
+ /* disable Tx ASAP, if not already */
+ tmp8 = RTL_R8 (ChipCmd);
+ if (tmp8 & CmdTxEnb)
+ RTL_W8 (ChipCmd, CmdRxEnb);
+
+ spin_lock_bh(&tp->rx_lock);
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ rtl8139_tx_clear (tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything */
+ if (netif_running(dev)) {
+ rtl8139_hw_start (dev);
+ netif_wake_queue (dev);
+ }
+ spin_unlock_bh(&tp->rx_lock);
+}
+
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ tp->watchdog_fired = 1;
+ if (!tp->have_thread) {
+ INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
+ schedule_delayed_work(&tp->thread, next_tick);
+ }
+}
+
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int entry;
+ unsigned int len = skb->len;
+ unsigned long flags;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = tp->cur_tx % NUM_TX_DESC;
+
+ /* Note: the chip doesn't have auto-pad! */
+ if (likely(len < TX_BUF_SIZE)) {
+ if (len < ETH_ZLEN)
+ memset(tp->tx_buf[entry], 0, ETH_ZLEN);
+ skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
+ dev_kfree_skb(skb);
+ } else {
+ dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+ /*
+ * Writing to TxStatus triggers a DMA transfer of the data
+ * copied to tp->tx_buf[entry] above. Use a memory barrier
+ * to make sure that the device sees the updated data.
+ */
+ wmb();
+ RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
+ tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+
+ tp->cur_tx++;
+
+ if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
+ netif_stop_queue (dev);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
+ len, entry);
+
+ return NETDEV_TX_OK;
+}
+
+
+static void rtl8139_tx_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long dirty_tx, tx_left;
+
+ assert (dev != NULL);
+ assert (ioaddr != NULL);
+
+ dirty_tx = tp->dirty_tx;
+ tx_left = tp->cur_tx - dirty_tx;
+ while (tx_left > 0) {
+ int entry = dirty_tx % NUM_TX_DESC;
+ int txstatus;
+
+ txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
+
+ if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+ break; /* It still hasn't been Txed */
+
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ if (txstatus & (TxOutOfWindow | TxAborted)) {
+ /* There was an major error, log it. */
+ netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
+ txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & TxAborted) {
+ dev->stats.tx_aborted_errors++;
+ RTL_W32 (TxConfig, TxClearAbt);
+ RTL_W16 (IntrStatus, TxErr);
+ wmb();
+ }
+ if (txstatus & TxCarrierLost)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & TxOutOfWindow)
+ dev->stats.tx_window_errors++;
+ } else {
+ if (txstatus & TxUnderrun) {
+ /* Add 64 to the Tx FIFO threshold. */
+ if (tp->tx_flag < 0x00300000)
+ tp->tx_flag += 0x00020000;
+ dev->stats.tx_fifo_errors++;
+ }
+ dev->stats.collisions += (txstatus >> 24) & 15;
+ dev->stats.tx_bytes += txstatus & 0x7ff;
+ dev->stats.tx_packets++;
+ }
+
+ dirty_tx++;
+ tx_left--;
+ }
+
+#ifndef RTL8139_NDEBUG
+ if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
+ netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
+ dirty_tx, tp->cur_tx);
+ dirty_tx += NUM_TX_DESC;
+ }
+#endif /* RTL8139_NDEBUG */
+
+ /* only wake the queue if we did work, and the queue is stopped */
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ mb();
+ netif_wake_queue (dev);
+ }
+}
+
+
+/* TODO: clean this up! Rx reset need not be this intensive */
+static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
+ struct rtl8139_private *tp, void __iomem *ioaddr)
+{
+ u8 tmp8;
+#ifdef CONFIG_8139_OLD_RX_RESET
+ int tmp_work;
+#endif
+
+ netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
+ rx_status);
+ dev->stats.rx_errors++;
+ if (!(rx_status & RxStatusOK)) {
+ if (rx_status & RxTooLong) {
+ netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+ rx_status);
+ /* A.C.: The chip hangs here. */
+ }
+ if (rx_status & (RxBadSymbol | RxBadAlign))
+ dev->stats.rx_frame_errors++;
+ if (rx_status & (RxRunt | RxTooLong))
+ dev->stats.rx_length_errors++;
+ if (rx_status & RxCRCErr)
+ dev->stats.rx_crc_errors++;
+ } else {
+ tp->xstats.rx_lost_in_ring++;
+ }
+
+#ifndef CONFIG_8139_OLD_RX_RESET
+ tmp8 = RTL_R8 (ChipCmd);
+ RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
+ RTL_W8 (ChipCmd, tmp8);
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+#else
+ /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+
+ /* disable receive */
+ RTL_W8_F (ChipCmd, CmdTxEnb);
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if (!(tmp8 & CmdRxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ netdev_warn(dev, "rx stop wait too long\n");
+ /* restart receive */
+ tmp_work = 200;
+ while (--tmp_work > 0) {
+ RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
+ udelay(1);
+ tmp8 = RTL_R8 (ChipCmd);
+ if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
+ break;
+ }
+ if (tmp_work <= 0)
+ netdev_warn(dev, "tx/rx enable wait too long\n");
+
+ /* and reinitialize all rx related registers */
+ RTL_W8_F (Cfg9346, Cfg9346_Unlock);
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
+
+ tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+ RTL_W32 (RxConfig, tp->rx_config);
+ tp->cur_rx = 0;
+
+ netdev_dbg(dev, "init buffer addresses\n");
+
+ /* Lock Config[01234] and BMCR register writes */
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
+ /* A.C.: Reset the multicast list. */
+ __set_rx_mode (dev);
+#endif
+}
+
+#if RX_BUF_IDX == 3
+static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
+ u32 offset, unsigned int size)
+{
+ u32 left = RX_BUF_LEN - offset;
+
+ if (size > left) {
+ skb_copy_to_linear_data(skb, ring + offset, left);
+ skb_copy_to_linear_data_offset(skb, left, ring, size - left);
+ } else
+ skb_copy_to_linear_data(skb, ring + offset, size);
+}
+#endif
+
+static void rtl8139_isr_ack(struct rtl8139_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ status = RTL_R16 (IntrStatus) & RxAckBits;
+
+ /* Clear out errors and receive interrupts */
+ if (likely(status != 0)) {
+ if (unlikely(status & (RxFIFOOver | RxOverflow))) {
+ tp->dev->stats.rx_errors++;
+ if (status & RxFIFOOver)
+ tp->dev->stats.rx_fifo_errors++;
+ }
+ RTL_W16_F (IntrStatus, RxAckBits);
+ }
+}
+
+static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
+ int budget)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ int received = 0;
+ unsigned char *rx_ring = tp->rx_ring;
+ unsigned int cur_rx = tp->cur_rx;
+ unsigned int rx_size = 0;
+
+ netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, (u16)cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
+
+ while (netif_running(dev) && received < budget &&
+ (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ u32 ring_offset = cur_rx % RX_BUF_LEN;
+ u32 rx_status;
+ unsigned int pkt_size;
+ struct sk_buff *skb;
+
+ rmb();
+
+ /* read size+status of next frame from DMA ring buffer */
+ rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
+ rx_size = rx_status >> 16;
+ pkt_size = rx_size - 4;
+
+ netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
+ __func__, rx_status, rx_size, cur_rx);
+#if RTL8139_DEBUG > 2
+ print_hex_dump(KERN_DEBUG, "Frame contents: ",
+ DUMP_PREFIX_OFFSET, 16, 1,
+ &rx_ring[ring_offset], 70, true);
+#endif
+
+ /* Packet copy from FIFO still in progress.
+ * Theoretically, this should never happen
+ * since EarlyRx is disabled.
+ */
+ if (unlikely(rx_size == 0xfff0)) {
+ if (!tp->fifo_copy_timeout)
+ tp->fifo_copy_timeout = jiffies + 2;
+ else if (time_after(jiffies, tp->fifo_copy_timeout)) {
+ netdev_dbg(dev, "hung FIFO. Reset\n");
+ rx_size = 0;
+ goto no_early_rx;
+ }
+ netif_dbg(tp, intr, dev, "fifo copy in progress\n");
+ tp->xstats.early_rx++;
+ break;
+ }
+
+no_early_rx:
+ tp->fifo_copy_timeout = 0;
+
+ /* If Rx err or invalid rx_size/rx_status received
+ * (which happens if we get lost in the ring),
+ * Rx process gets reset, so we abort any further
+ * Rx processing.
+ */
+ if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
+ (rx_size < 8) ||
+ (!(rx_status & RxStatusOK)))) {
+ rtl8139_rx_err (rx_status, dev, tp, ioaddr);
+ received = -1;
+ goto out;
+ }
+
+ /* Malloc up new buffer, compatible with net-2e. */
+ /* Omit the four octet CRC from the length. */
+
+ skb = netdev_alloc_skb_ip_align(dev, pkt_size);
+ if (likely(skb)) {
+#if RX_BUF_IDX == 3
+ wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
+#else
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
+#endif
+ skb_put (skb, pkt_size);
+
+ skb->protocol = eth_type_trans (skb, dev);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+
+ netif_receive_skb (skb);
+ } else {
+ if (net_ratelimit())
+ netdev_warn(dev, "Memory squeeze, dropping packet\n");
+ dev->stats.rx_dropped++;
+ }
+ received++;
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
+
+ rtl8139_isr_ack(tp);
+ }
+
+ if (unlikely(!received || rx_size == 0xfff0))
+ rtl8139_isr_ack(tp);
+
+ netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
+
+ tp->cur_rx = cur_rx;
+
+ /*
+ * The receive buffer should be mostly empty.
+ * Tell NAPI to reenable the Rx irq.
+ */
+ if (tp->fifo_copy_timeout)
+ received = budget;
+
+out:
+ return received;
+}
+
+
+static void rtl8139_weird_interrupt (struct net_device *dev,
+ struct rtl8139_private *tp,
+ void __iomem *ioaddr,
+ int status, int link_changed)
+{
+ netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
+
+ assert (dev != NULL);
+ assert (tp != NULL);
+ assert (ioaddr != NULL);
+
+ /* Update the error count. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ if ((status & RxUnderrun) && link_changed &&
+ (tp->drv_flags & HAS_LNK_CHNG)) {
+ rtl_check_media(dev, 0);
+ status &= ~RxUnderrun;
+ }
+
+ if (status & (RxUnderrun | RxErr))
+ dev->stats.rx_errors++;
+
+ if (status & PCSTimeout)
+ dev->stats.rx_length_errors++;
+ if (status & RxUnderrun)
+ dev->stats.rx_fifo_errors++;
+ if (status & PCIErr) {
+ u16 pci_cmd_status;
+ pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
+
+ netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
+ }
+}
+
+static int rtl8139_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ spin_lock(&tp->rx_lock);
+ work_done = 0;
+ if (likely(RTL_R16(IntrStatus) & RxAckBits))
+ work_done += rtl8139_rx(dev, tp, budget);
+
+ if (work_done < budget) {
+ unsigned long flags;
+ /*
+ * Order is important since data can get interrupted
+ * again when we think we are done.
+ */
+ spin_lock_irqsave(&tp->lock, flags);
+ __napi_complete(napi);
+ RTL_W16_F(IntrMask, rtl8139_intr_mask);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+ spin_unlock(&tp->rx_lock);
+
+ return work_done;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status, ackstat;
+ int link_changed = 0; /* avoid bogus "uninit" warning */
+ int handled = 0;
+
+ spin_lock (&tp->lock);
+ status = RTL_R16 (IntrStatus);
+
+ /* shared irq? */
+ if (unlikely((status & rtl8139_intr_mask) == 0))
+ goto out;
+
+ handled = 1;
+
+ /* h/w no longer present (hotplug?) or major error, bail */
+ if (unlikely(status == 0xFFFF))
+ goto out;
+
+ /* close possible race's with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ RTL_W16 (IntrMask, 0);
+ goto out;
+ }
+
+ /* Acknowledge all of the current interrupt sources ASAP, but
+ an first get an additional status bit from CSCR. */
+ if (unlikely(status & RxUnderrun))
+ link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
+
+ ackstat = status & ~(RxAckBits | TxErr);
+ if (ackstat)
+ RTL_W16 (IntrStatus, ackstat);
+
+ /* Receive packets are processed by poll routine.
+ If not running start it now. */
+ if (status & RxAckBits){
+ if (napi_schedule_prep(&tp->napi)) {
+ RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
+ __napi_schedule(&tp->napi);
+ }
+ }
+
+ /* Check uncommon events with one test. */
+ if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
+ rtl8139_weird_interrupt (dev, tp, ioaddr,
+ status, link_changed);
+
+ if (status & (TxOK | TxErr)) {
+ rtl8139_tx_interrupt (dev, tp, ioaddr);
+ if (status & TxErr)
+ RTL_W16 (IntrStatus, TxErr);
+ }
+ out:
+ spin_unlock (&tp->lock);
+
+ netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
+ RTL_R16(IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void rtl8139_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rtl8139_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static int rtl8139_close (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ napi_disable(&tp->napi);
+
+ netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
+ RTL_R16(IntrStatus));
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Stop the chip's Tx and Rx DMA processes. */
+ RTL_W8 (ChipCmd, 0);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ RTL_W16 (IntrMask, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ free_irq (dev->irq, dev);
+
+ rtl8139_tx_clear (tp);
+
+ dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
+ tp->rx_ring, tp->rx_ring_dma);
+ dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
+ tp->tx_bufs, tp->tx_bufs_dma);
+ tp->rx_ring = NULL;
+ tp->tx_bufs = NULL;
+
+ /* Green! Put the chip in low-power mode. */
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+
+ if (rtl_chip_info[tp->chipset].flags & HasHltClk)
+ RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
+
+ return 0;
+}
+
+
+/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
+ kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
+ other threads or interrupts aren't messing with the 8139. */
+static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
+ u8 cfg3 = RTL_R8 (Config3);
+ u8 cfg5 = RTL_R8 (Config5);
+
+ wol->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+
+ wol->wolopts = 0;
+ if (cfg3 & Cfg3_LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (cfg3 & Cfg3_Magic)
+ wol->wolopts |= WAKE_MAGIC;
+ /* (KON)FIXME: See how netdev_set_wol() handles the
+ following constants. */
+ if (cfg5 & Cfg5_UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (cfg5 & Cfg5_MWF)
+ wol->wolopts |= WAKE_MCAST;
+ if (cfg5 & Cfg5_BWF)
+ wol->wolopts |= WAKE_BCAST;
+ }
+ spin_unlock_irq(&tp->lock);
+}
+
+
+/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
+ that wol points to kernel memory and other threads or interrupts
+ aren't messing with the 8139. */
+static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 support;
+ u8 cfg3, cfg5;
+
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
+ ? (WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
+ : 0);
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
+ if (wol->wolopts & WAKE_PHY)
+ cfg3 |= Cfg3_LinkUp;
+ if (wol->wolopts & WAKE_MAGIC)
+ cfg3 |= Cfg3_Magic;
+ RTL_W8 (Cfg9346, Cfg9346_Unlock);
+ RTL_W8 (Config3, cfg3);
+ RTL_W8 (Cfg9346, Cfg9346_Lock);
+
+ cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
+ /* (KON)FIXME: These are untested. We may have to set the
+ CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
+ documentation. */
+ if (wol->wolopts & WAKE_UCAST)
+ cfg5 |= Cfg5_UWF;
+ if (wol->wolopts & WAKE_MCAST)
+ cfg5 |= Cfg5_MWF;
+ if (wol->wolopts & WAKE_BCAST)
+ cfg5 |= Cfg5_BWF;
+ RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
+}
+
+static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return 0;
+}
+
+static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
+ return rc;
+}
+
+static int rtl8139_nway_reset(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
+}
+
+static u32 rtl8139_get_link(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
+}
+
+static u32 rtl8139_get_msglevel(struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
+}
+
+static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
+}
+
+static int rtl8139_get_regs_len(struct net_device *dev)
+{
+ struct rtl8139_private *tp;
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return 0;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
+}
+
+static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ struct rtl8139_private *tp;
+
+ /* TODO: we are too slack to do reg dumping for pio, for now */
+ if (use_io)
+ return;
+ tp = netdev_priv(dev);
+
+ regs->version = RTL_REGS_VER;
+
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8139_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return RTL_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
+}
+
+static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+static const struct ethtool_ops rtl8139_ethtool_ops = {
+ .get_drvinfo = rtl8139_get_drvinfo,
+ .get_settings = rtl8139_get_settings,
+ .set_settings = rtl8139_set_settings,
+ .get_regs_len = rtl8139_get_regs_len,
+ .get_regs = rtl8139_get_regs,
+ .nway_reset = rtl8139_nway_reset,
+ .get_link = rtl8139_get_link,
+ .get_msglevel = rtl8139_get_msglevel,
+ .set_msglevel = rtl8139_set_msglevel,
+ .get_wol = rtl8139_get_wol,
+ .set_wol = rtl8139_set_wol,
+ .get_strings = rtl8139_get_strings,
+ .get_sset_count = rtl8139_get_sset_count,
+ .get_ethtool_stats = rtl8139_get_ethtool_stats,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
+
+ return rc;
+}
+
+
+static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave (&tp->lock, flags);
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+ spin_unlock_irqrestore (&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ This routine is not state sensitive and need not be SMP locked. */
+
+static void __set_rx_mode (struct net_device *dev)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int rx_mode;
+ u32 tmp;
+
+ netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08lx\n",
+ dev->flags, RTL_R32(RxConfig));
+
+ /* Note: do not reorder, GCC is clever about common statements. */
+ if (dev->flags & IFF_PROMISC) {
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct netdev_hw_addr *ha;
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ /* We can safely update without stopping the chip. */
+ tmp = rtl8139_rx_config | rx_mode;
+ if (tp->rx_config != tmp) {
+ RTL_W32_F (RxConfig, tmp);
+ tp->rx_config = tmp;
+ }
+ RTL_W32_F (MAR0 + 0, mc_filter[0]);
+ RTL_W32_F (MAR0 + 4, mc_filter[1]);
+}
+
+static void rtl8139_set_rx_mode (struct net_device *dev)
+{
+ unsigned long flags;
+ struct rtl8139_private *tp = netdev_priv(dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+ __set_rx_mode(dev);
+ spin_unlock_irqrestore (&tp->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ pci_save_state (pdev);
+
+ if (!netif_running (dev))
+ return 0;
+
+ netif_device_detach (dev);
+
+ spin_lock_irqsave (&tp->lock, flags);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ RTL_W16 (IntrMask, 0);
+ RTL_W8 (ChipCmd, 0);
+
+ /* Update the error counts. */
+ dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
+ RTL_W32 (RxMissed, 0);
+
+ spin_unlock_irqrestore (&tp->lock, flags);
+
+ pci_set_power_state (pdev, PCI_D3hot);
+
+ return 0;
+}
+
+
+static int rtl8139_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ pci_restore_state (pdev);
+ if (!netif_running (dev))
+ return 0;
+ pci_set_power_state (pdev, PCI_D0);
+ rtl8139_init_ring (dev);
+ rtl8139_hw_start (dev);
+ netif_device_attach (dev);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver rtl8139_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rtl8139_pci_tbl,
+ .probe = rtl8139_init_one,
+ .remove = __devexit_p(rtl8139_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rtl8139_suspend,
+ .resume = rtl8139_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init rtl8139_init_module (void)
+{
+ /* when we're a module, we always print a version message,
+ * even if no 8139 board is found.
+ */
+#ifdef MODULE
+ pr_info(RTL8139_DRIVER_NAME "\n");
+#endif
+
+ return pci_register_driver(&rtl8139_pci_driver);
+}
+
+
+static void __exit rtl8139_cleanup_module (void)
+{
+ pci_unregister_driver (&rtl8139_pci_driver);
+}
+
+
+module_init(rtl8139_init_module);
+module_exit(rtl8139_cleanup_module);
--- a/devices/Makefile.am Fri May 13 15:33:16 2011 +0200
+++ b/devices/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -59,8 +59,14 @@
8139too-2.6.29-orig.c \
8139too-2.6.31-ethercat.c \
8139too-2.6.31-orig.c \
+ 8139too-2.6.32-ethercat.c \
+ 8139too-2.6.32-orig.c \
+ 8139too-2.6.33-ethercat.c \
+ 8139too-2.6.33-orig.c \
8139too-2.6.34-ethercat.c \
8139too-2.6.34-orig.c \
+ 8139too-2.6.35-ethercat.c \
+ 8139too-2.6.35-orig.c \
8139too-2.6.36-ethercat.c \
8139too-2.6.36-orig.c \
8139too-2.6.37-ethercat.c \
@@ -79,6 +85,8 @@
e100-2.6.29-orig.c \
e100-2.6.31-ethercat.c \
e100-2.6.31-orig.c \
+ e100-2.6.33-ethercat.c \
+ e100-2.6.33-orig.c \
ecdev.h \
generic.c \
r8169-2.6.24-ethercat.c \
@@ -91,6 +99,8 @@
r8169-2.6.29-orig.c \
r8169-2.6.31-ethercat.c \
r8169-2.6.31-orig.c
+ r8169-2.6.33-ethercat.c \
+ r8169-2.6.33-orig.c
EXTRA_DIST = \
Kbuild.in
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e100-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3260 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * Copyright (C) 2007-2008 Florian Pose, Ingenieurgemeinschaft IgH
+ *
+ * This file is part of the IgH EtherCAT Master.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT Master is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with the IgH EtherCAT Master; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * ---
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ * ---
+ *
+ * vim: noexpandtab
+ *
+ *****************************************************************************/
+
+/**
+ \file
+ EtherCAT driver for e100-compatible NICs.
+*/
+
+/* Former documentation: */
+
+/*******************************************************************************
+
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * e100.c: Intel(R) PRO/100 ethernet driver
+ *
+ * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
+ * original e100 driver, but better described as a munging of
+ * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
+ *
+ * References:
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family,
+ * Open Source Software Developers Manual,
+ * http://sourceforge.net/projects/e1000
+ *
+ *
+ * Theory of Operation
+ *
+ * I. General
+ *
+ * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
+ * controller family, which includes the 82557, 82558, 82559, 82550,
+ * 82551, and 82562 devices. 82558 and greater controllers
+ * integrate the Intel 82555 PHY. The controllers are used in
+ * server and client network interface cards, as well as in
+ * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
+ * configurations. 8255x supports a 32-bit linear addressing
+ * mode and operates at 33Mhz PCI clock rate.
+ *
+ * II. Driver Operation
+ *
+ * Memory-mapped mode is used exclusively to access the device's
+ * shared-memory structure, the Control/Status Registers (CSR). All
+ * setup, configuration, and control of the device, including queuing
+ * of Tx, Rx, and configuration commands is through the CSR.
+ * cmd_lock serializes accesses to the CSR command register. cb_lock
+ * protects the shared Command Block List (CBL).
+ *
+ * 8255x is highly MII-compliant and all access to the PHY go
+ * through the Management Data Interface (MDI). Consequently, the
+ * driver leverages the mii.c library shared with other MII-compliant
+ * devices.
+ *
+ * Big- and Little-Endian byte order as well as 32- and 64-bit
+ * archs are supported. Weak-ordered memory and non-cache-coherent
+ * archs are supported.
+ *
+ * III. Transmit
+ *
+ * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
+ * together in a fixed-size ring (CBL) thus forming the flexible mode
+ * memory structure. A TCB marked with the suspend-bit indicates
+ * the end of the ring. The last TCB processed suspends the
+ * controller, and the controller can be restarted by issue a CU
+ * resume command to continue from the suspend point, or a CU start
+ * command to start at a given position in the ring.
+ *
+ * Non-Tx commands (config, multicast setup, etc) are linked
+ * into the CBL ring along with Tx commands. The common structure
+ * used for both Tx and non-Tx commands is the Command Block (CB).
+ *
+ * cb_to_use is the next CB to use for queuing a command; cb_to_clean
+ * is the next CB to check for completion; cb_to_send is the first
+ * CB to start on in case of a previous failure to resume. CB clean
+ * up happens in interrupt context in response to a CU interrupt.
+ * cbs_avail keeps track of number of free CB resources available.
+ *
+ * Hardware padding of short packets to minimum packet size is
+ * enabled. 82557 pads with 7Eh, while the later controllers pad
+ * with 00h.
+ *
+ * IV. Receive
+ *
+ * The Receive Frame Area (RFA) comprises a ring of Receive Frame
+ * Descriptors (RFD) + data buffer, thus forming the simplified mode
+ * memory structure. Rx skbs are allocated to contain both the RFD
+ * and the data buffer, but the RFD is pulled off before the skb is
+ * indicated. The data buffer is aligned such that encapsulated
+ * protocol headers are u32-aligned. Since the RFD is part of the
+ * mapped shared memory, and completion status is contained within
+ * the RFD, the RFD must be dma_sync'ed to maintain a consistent
+ * view from software and hardware.
+ *
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
+ * Under typical operation, the receive unit (RU) is start once,
+ * and the controller happily fills RFDs as frames arrive. If
+ * replacement RFDs cannot be allocated, or the RU goes non-active,
+ * the RU must be restarted. Frame arrival generates an interrupt,
+ * and Rx indication and re-allocation happen in the same context,
+ * therefore no locking is required. A software-generated interrupt
+ * is generated from the watchdog to recover from a failed allocation
+ * scenario where all Rx resources have been indicated and none re-
+ * placed.
+ *
+ * V. Miscellaneous
+ *
+ * VLAN offloading of tagging, stripping and filtering is not
+ * supported, but driver will accommodate the extra 4-byte VLAN tag
+ * for processing by upper layers. Tx/Rx Checksum offloading is not
+ * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
+ * not supported (hardware limitation).
+ *
+ * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
+ *
+ * Thanks to JC (jchapman@katalix.com) for helping with
+ * testing/troubleshooting the development driver.
+ *
+ * TODO:
+ * o several entry points race with dev->close
+ * o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+
+// EtherCAT includes
+#include "../globals.h"
+#include "ecdev.h"
+
+#define DRV_NAME "ec_e100"
+#include <asm/unaligned.h>
+
+
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.24-k2"DRV_EXT
+#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
+#define PFX DRV_NAME ": "
+
+#define E100_WATCHDOG_PERIOD (2 * HZ)
+#define E100_NAPI_WEIGHT 16
+
+#define FIRMWARE_D101M "e100/d101m_ucode.bin"
+#define FIRMWARE_D101S "e100/d101s_ucode.bin"
+#define FIRMWARE_D102E "e100/d102e_ucode.bin"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_D101M);
+MODULE_FIRMWARE(FIRMWARE_D101S);
+MODULE_FIRMWARE(FIRMWARE_D102E);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION ", master " EC_MASTER_VERSION);
+
+void e100_ec_poll(struct net_device *);
+
+static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
+module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
+ __func__ , ## args))
+
+#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
+ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
+ PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
+static struct pci_device_id e100_id_table[] = {
+ INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
+ { 0, }
+};
+
+// prevent from being loaded automatically
+//MODULE_DEVICE_TABLE(pci, e100_id_table);
+
+enum mac {
+ mac_82557_D100_A = 0,
+ mac_82557_D100_B = 1,
+ mac_82557_D100_C = 2,
+ mac_82558_D101_A4 = 4,
+ mac_82558_D101_B0 = 5,
+ mac_82559_D101M = 8,
+ mac_82559_D101S = 9,
+ mac_82550_D102 = 12,
+ mac_82550_D102_C = 13,
+ mac_82551_E = 14,
+ mac_82551_F = 15,
+ mac_82551_10 = 16,
+ mac_unknown = 0xFF,
+};
+
+enum phy {
+ phy_100a = 0x000003E0,
+ phy_100c = 0x035002A8,
+ phy_82555_tx = 0x015002A8,
+ phy_nsc_tx = 0x5C002000,
+ phy_82562_et = 0x033002A8,
+ phy_82562_em = 0x032002A8,
+ phy_82562_ek = 0x031002A8,
+ phy_82562_eh = 0x017002A8,
+ phy_82552_v = 0xd061004d,
+ phy_unknown = 0xFFFFFFFF,
+};
+
+/* CSR (Control/Status Registers) */
+struct csr {
+ struct {
+ u8 status;
+ u8 stat_ack;
+ u8 cmd_lo;
+ u8 cmd_hi;
+ u32 gen_ptr;
+ } scb;
+ u32 port;
+ u16 flash_ctrl;
+ u8 eeprom_ctrl_lo;
+ u8 eeprom_ctrl_hi;
+ u32 mdi_ctrl;
+ u32 rx_dma_count;
+};
+
+enum scb_status {
+ rus_no_res = 0x08,
+ rus_ready = 0x10,
+ rus_mask = 0x3C,
+};
+
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+enum scb_cmd_hi {
+ irq_mask_none = 0x00,
+ irq_mask_all = 0x01,
+ irq_sw_gen = 0x02,
+};
+
+enum scb_cmd_lo {
+ cuc_nop = 0x00,
+ ruc_start = 0x01,
+ ruc_load_base = 0x06,
+ cuc_start = 0x10,
+ cuc_resume = 0x20,
+ cuc_dump_addr = 0x40,
+ cuc_dump_stats = 0x50,
+ cuc_load_base = 0x60,
+ cuc_dump_reset = 0x70,
+};
+
+enum cuc_dump {
+ cuc_dump_complete = 0x0000A005,
+ cuc_dump_reset_complete = 0x0000A007,
+};
+
+enum port {
+ software_reset = 0x0000,
+ selftest = 0x0001,
+ selective_reset = 0x0002,
+};
+
+enum eeprom_ctrl_lo {
+ eesk = 0x01,
+ eecs = 0x02,
+ eedi = 0x04,
+ eedo = 0x08,
+};
+
+enum mdi_ctrl {
+ mdi_write = 0x04000000,
+ mdi_read = 0x08000000,
+ mdi_ready = 0x10000000,
+};
+
+enum eeprom_op {
+ op_write = 0x05,
+ op_read = 0x06,
+ op_ewds = 0x10,
+ op_ewen = 0x13,
+};
+
+enum eeprom_offsets {
+ eeprom_cnfg_mdix = 0x03,
+ eeprom_phy_iface = 0x06,
+ eeprom_id = 0x0A,
+ eeprom_config_asf = 0x0D,
+ eeprom_smbus_addr = 0x90,
+};
+
+enum eeprom_cnfg_mdix {
+ eeprom_mdix_enabled = 0x0080,
+};
+
+enum eeprom_phy_iface {
+ NoSuchPhy = 0,
+ I82553AB,
+ I82553C,
+ I82503,
+ DP83840,
+ S80C240,
+ S80C24,
+ I82555,
+ DP83840A = 10,
+};
+
+enum eeprom_id {
+ eeprom_id_wol = 0x0020,
+};
+
+enum eeprom_config_asf {
+ eeprom_asf = 0x8000,
+ eeprom_gcl = 0x4000,
+};
+
+enum cb_status {
+ cb_complete = 0x8000,
+ cb_ok = 0x2000,
+};
+
+enum cb_command {
+ cb_nop = 0x0000,
+ cb_iaaddr = 0x0001,
+ cb_config = 0x0002,
+ cb_multi = 0x0003,
+ cb_tx = 0x0004,
+ cb_ucode = 0x0005,
+ cb_dump = 0x0006,
+ cb_tx_sf = 0x0008,
+ cb_cid = 0x1f00,
+ cb_i = 0x2000,
+ cb_s = 0x4000,
+ cb_el = 0x8000,
+};
+
+struct rfd {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
+};
+
+struct rx {
+ struct rx *next, *prev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+struct config {
+/*0*/ u8 X(byte_count:6, pad0:2);
+/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
+/*2*/ u8 adaptive_ifs;
+/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
+ term_write_cache_line:1), pad3:4);
+/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
+/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
+/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
+ tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
+ rx_discard_overruns:1), rx_save_bad_frames:1);
+/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
+ pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
+ tx_dynamic_tbd:1);
+/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
+/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
+ link_status_wake:1), arp_wake:1), mcmatch_wake:1);
+/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
+ loopback:2);
+/*11*/ u8 X(linear_priority:3, pad11:5);
+/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
+/*13*/ u8 ip_addr_lo;
+/*14*/ u8 ip_addr_hi;
+/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
+ wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
+ pad15_2:1), crs_or_cdt:1);
+/*16*/ u8 fc_delay_lo;
+/*17*/ u8 fc_delay_hi;
+/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
+ rx_long_ok:1), fc_priority_threshold:3), pad18:1);
+/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
+ fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
+ full_duplex_force:1), full_duplex_pin:1);
+/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
+/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
+/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
+ u8 pad_d102[9];
+};
+
+#define E100_MAX_MULTICAST_ADDRS 64
+struct multi {
+ __le16 count;
+ u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
+};
+
+/* Important: keep total struct u32-aligned */
+#define UCODE_SIZE 134
+struct cb {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ union {
+ u8 iaaddr[ETH_ALEN];
+ __le32 ucode[UCODE_SIZE];
+ struct config config;
+ struct multi multi;
+ struct {
+ u32 tbd_array;
+ u16 tcb_byte_count;
+ u8 threshold;
+ u8 tbd_count;
+ struct {
+ __le32 buf_addr;
+ __le16 size;
+ u16 eol;
+ } tbd;
+ } tcb;
+ __le32 dump_buffer_addr;
+ } u;
+ struct cb *next, *prev;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+enum loopback {
+ lb_none = 0, lb_mac = 1, lb_phy = 3,
+};
+
+struct stats {
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
+};
+
+struct mem {
+ struct {
+ u32 signature;
+ u32 result;
+ } selftest;
+ struct stats stats;
+ u8 dump_buf[596];
+};
+
+struct param_range {
+ u32 min;
+ u32 max;
+ u32 count;
+};
+
+struct params {
+ struct param_range rfds;
+ struct param_range cbs;
+};
+
+struct nic {
+ /* Begin: frequently used values: keep adjacent for cache effect */
+ u32 msg_enable ____cacheline_aligned;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
+
+ struct rx *rxs ____cacheline_aligned;
+ struct rx *rx_to_use;
+ struct rx *rx_to_clean;
+ struct rfd blank_rfd;
+ enum ru_state ru_running;
+
+ spinlock_t cb_lock ____cacheline_aligned;
+ spinlock_t cmd_lock;
+ struct csr __iomem *csr;
+ enum scb_cmd_lo cuc_cmd;
+ unsigned int cbs_avail;
+ struct napi_struct napi;
+ struct cb *cbs;
+ struct cb *cb_to_use;
+ struct cb *cb_to_send;
+ struct cb *cb_to_clean;
+ __le16 tx_command;
+ /* End: frequently used values: keep adjacent for cache effect */
+
+ enum {
+ ich = (1 << 0),
+ promiscuous = (1 << 1),
+ multicast_all = (1 << 2),
+ wol_magic = (1 << 3),
+ ich_10h_workaround = (1 << 4),
+ } flags ____cacheline_aligned;
+
+ enum mac mac;
+ enum phy phy;
+ struct params params;
+ struct timer_list watchdog;
+ struct timer_list blink_timer;
+ struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
+ enum loopback loopback;
+
+ struct mem *mem;
+ dma_addr_t dma_addr;
+
+ struct pci_pool *cbs_pool;
+ dma_addr_t cbs_dma_addr;
+ u8 adaptive_ifs;
+ u8 tx_threshold;
+ u32 tx_frames;
+ u32 tx_collisions;
+
+ u32 tx_deferred;
+ u32 tx_single_collisions;
+ u32 tx_multiple_collisions;
+ u32 tx_fc_pause;
+ u32 tx_tco_frames;
+
+ u32 rx_fc_pause;
+ u32 rx_fc_unsupported;
+ u32 rx_tco_frames;
+ u32 rx_over_length_errors;
+
+ u16 leds;
+ u16 eeprom_wc;
+
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
+ const struct firmware *fw;
+ ec_device_t *ecdev;
+ unsigned long ec_watchdog_jiffies;
+};
+
+static inline void e100_write_flush(struct nic *nic)
+{
+ /* Flush previous PCI writes through intermediate bridges
+ * by doing a benign read */
+ (void)ioread8(&nic->csr->scb.status);
+}
+
+static void e100_enable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ if (nic->ecdev)
+ return;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_disable_irq(struct nic *nic)
+{
+ unsigned long flags = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_hw_reset(struct nic *nic)
+{
+ /* Put CU and RU into idle with a selective reset to get
+ * device off of PCI bus */
+ iowrite32(selective_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Now fully reset device */
+ iowrite32(software_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Mask off our interrupt line - it's unmasked after reset */
+ e100_disable_irq(nic);
+}
+
+static int e100_self_test(struct nic *nic)
+{
+ u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
+
+ /* Passing the self-test is a pretty good indication
+ * that the device can DMA to/from host memory */
+
+ nic->mem->selftest.signature = 0;
+ nic->mem->selftest.result = 0xFFFFFFFF;
+
+ iowrite32(selftest | dma_addr, &nic->csr->port);
+ e100_write_flush(nic);
+ /* Wait 10 msec for self-test to complete */
+ msleep(10);
+
+ /* Interrupts are enabled after self-test */
+ e100_disable_irq(nic);
+
+ /* Check results of self-test */
+ if (nic->mem->selftest.result != 0) {
+ DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
+ return -ETIMEDOUT;
+ }
+ if (nic->mem->selftest.signature == 0) {
+ DPRINTK(HW, ERR, "Self-test failed: timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
+{
+ u32 cmd_addr_data[3];
+ u8 ctrl;
+ int i, j;
+
+ /* Three cmds: write/erase enable, write data, write/erase disable */
+ cmd_addr_data[0] = op_ewen << (addr_len - 2);
+ cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+ le16_to_cpu(data);
+ cmd_addr_data[2] = op_ewds << (addr_len - 2);
+
+ /* Bit-bang cmds to write word to eeprom */
+ for (j = 0; j < 3; j++) {
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data[j] & (1 << i)) ?
+ eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+ /* Wait 10 msec for cmd to complete */
+ msleep(10);
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+};
+
+/* General technique stolen from the eepro100 driver - very clever */
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+{
+ u32 cmd_addr_data;
+ u16 data = 0;
+ u8 ctrl;
+ int i;
+
+ cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Bit-bang to read word from eeprom */
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Eeprom drives a dummy zero to EEDO after receiving
+ * complete address. Use this to adjust addr_len. */
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if (!(ctrl & eedo) && i > 16) {
+ *addr_len -= (i - 16);
+ i = 17;
+ }
+
+ data = (data << 1) | (ctrl & eedo ? 1 : 0);
+ }
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ return cpu_to_le16(data);
+};
+
+/* Load entire EEPROM image into driver cache and validate checksum */
+static int e100_eeprom_load(struct nic *nic)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ for (addr = 0; addr < nic->eeprom_wc; addr++) {
+ nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
+ if (addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ }
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
+ DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/* Save (portion of) driver EEPROM cache to device and update checksum */
+static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ if (start + count >= nic->eeprom_wc)
+ return -EINVAL;
+
+ for (addr = start; addr < start + count; addr++)
+ e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
+ e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+ nic->eeprom[nic->eeprom_wc - 1]);
+
+ return 0;
+}
+
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+{
+ unsigned long flags = 0;
+ unsigned int i;
+ int err = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+
+ /* Previous command is accepted when SCB clears */
+ for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
+ break;
+ cpu_relax();
+ if (unlikely(i > E100_WAIT_SCB_FAST))
+ udelay(5);
+ }
+ if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ err = -EAGAIN;
+ goto err_unlock;
+ }
+
+ if (unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
+
+err_unlock:
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+
+ return err;
+}
+
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ struct cb *cb;
+ unsigned long flags = 0;
+ int err = 0;
+
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->cb_lock, flags);
+
+ if (unlikely(!nic->cbs_avail)) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cb = nic->cb_to_use;
+ nic->cb_to_use = cb->next;
+ nic->cbs_avail--;
+ cb->skb = skb;
+
+ if (unlikely(!nic->cbs_avail))
+ err = -ENOSPC;
+
+ cb_prepare(nic, cb, skb);
+
+ /* Order is important otherwise we'll be in a race with h/w:
+ * set S-bit in current first, then clear S-bit in previous. */
+ cb->command |= cpu_to_le16(cb_s);
+ wmb();
+ cb->prev->command &= cpu_to_le16(~cb_s);
+
+ while (nic->cb_to_send != nic->cb_to_use) {
+ if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ nic->cb_to_send->dma_addr))) {
+ /* Ok, here's where things get sticky. It's
+ * possible that we can't schedule the command
+ * because the controller is too busy, so
+ * let's just queue the command and try again
+ * when another command is scheduled. */
+ if (err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
+ break;
+ } else {
+ nic->cuc_cmd = cuc_resume;
+ nic->cb_to_send = nic->cb_to_send->next;
+ }
+ }
+
+err_unlock:
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->cb_lock, flags);
+
+ return err;
+}
+
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+{
+ u32 data_out = 0;
+ unsigned int i;
+ unsigned long flags = 0;
+
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ if (!nic->ecdev)
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ if (!nic->ecdev)
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
+ return (u16)data_out;
+}
+
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ if ((reg == MII_BMCR) && (dir == mdi_write)) {
+ if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+ u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+ MII_ADVERTISE);
+
+ /*
+ * Workaround Si issue where sometimes the part will not
+ * autoneg to 100Mbps even when advertised.
+ */
+ if (advert & ADVERTISE_100FULL)
+ data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+ else if (advert & ADVERTISE_100HALF)
+ data |= BMCR_SPEED100;
+ }
+ }
+ return mdio_ctrl_hw(nic, addr, dir, reg, data);
+}
+
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ /* might need to allocate a netdev_priv'ed register array eventually
+ * to be able to record state changes, but for now
+ * some fully hardcoded register handling ought to be ok I guess. */
+
+ if (dir == mdi_read) {
+ switch (reg) {
+ case MII_BMCR:
+ /* Auto-negotiation, right? */
+ return BMCR_ANENABLE |
+ BMCR_FULLDPLX;
+ case MII_BMSR:
+ return BMSR_LSTATUS /* for mii_link_ok() */ |
+ BMSR_ANEGCAPABLE |
+ BMSR_10FULL;
+ case MII_ADVERTISE:
+ /* 80c24 is a "combo card" PHY, right? */
+ return ADVERTISE_10HALF |
+ ADVERTISE_10FULL;
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
+ } else {
+ switch (reg) {
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
+ }
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+ /* for now, just check it by comparing whether we
+ are using MII software emulation.
+ */
+ return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
+}
+
+static void e100_get_defaults(struct nic *nic)
+{
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
+
+ /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if (nic->mac == mac_unknown)
+ nic->mac = mac_82557_D100_A;
+
+ nic->params.rfds = rfds;
+ nic->params.cbs = cbs;
+
+ /* Quadwords to DMA into FIFO before starting frame transmit */
+ nic->tx_threshold = 0xE0;
+
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
+
+ /* Template for a freshly allocated RFD */
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
+ nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+
+ /* MII setup */
+ nic->mii.phy_id_mask = 0x1F;
+ nic->mii.reg_num_mask = 0x1F;
+ nic->mii.dev = nic->netdev;
+ nic->mii.mdio_read = mdio_read;
+ nic->mii.mdio_write = mdio_write;
+}
+
+static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct config *config = &cb->u.config;
+ u8 *c = (u8 *)config;
+
+ cb->command = cpu_to_le16(cb_config);
+
+ memset(config, 0, sizeof(struct config));
+
+ config->byte_count = 0x16; /* bytes in this struct */
+ config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
+ config->direct_rx_dma = 0x1; /* reserved */
+ config->standard_tcb = 0x1; /* 1=standard, 0=extended */
+ config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
+ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
+ config->tx_underrun_retry = 0x3; /* # of underrun retries */
+ if (e100_phy_supports_mii(nic))
+ config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
+ config->pad10 = 0x6;
+ config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
+ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
+ config->ifs = 0x6; /* x16 = inter frame spacing */
+ config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
+ config->pad15_1 = 0x1;
+ config->pad15_2 = 0x1;
+ config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
+ config->fc_delay_hi = 0x40; /* time delay for fc frame */
+ config->tx_padding = 0x1; /* 1=pad short frames */
+ config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
+ config->pad18 = 0x1;
+ config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
+ config->pad20_1 = 0x1F;
+ config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
+ config->pad21_1 = 0x5;
+
+ config->adaptive_ifs = nic->adaptive_ifs;
+ config->loopback = nic->loopback;
+
+ if (nic->mii.force_media && nic->mii.full_duplex)
+ config->full_duplex_force = 0x1; /* 1=force, 0=auto */
+
+ if (nic->flags & promiscuous || nic->loopback) {
+ config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
+ config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
+ config->promiscuous_mode = 0x1; /* 1=on, 0=off */
+ }
+
+ if (nic->flags & multicast_all)
+ config->multicast_all = 0x1; /* 1=accept, 0=no */
+
+ /* disable WoL when up */
+ if (nic->ecdev ||
+ (netif_running(nic->netdev) || !(nic->flags & wol_magic)))
+ config->magic_packet_disable = 0x1; /* 1=off, 0=on */
+
+ if (nic->mac >= mac_82558_D101_A4) {
+ config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
+ config->mwi_enable = 0x1; /* 1=enable, 0=disable */
+ config->standard_tcb = 0x0; /* 1=standard, 0=extended */
+ config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
+ if (nic->mac >= mac_82559_D101M) {
+ config->tno_intr = 0x1; /* TCO stats enable */
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
+ config->standard_stat_counter = 0x0;
+ }
+ }
+
+ DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+}
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+/* Initialize firmware */
+static const struct firmware *e100_request_firmware(struct nic *nic)
+{
+ const char *fw_name;
+ const struct firmware *fw = nic->fw;
+ u8 timer, bundle, min_size;
+ int err = 0;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return NULL;
+
+ /* Search for ucode match against h/w revision */
+ if (nic->mac == mac_82559_D101M)
+ fw_name = FIRMWARE_D101M;
+ else if (nic->mac == mac_82559_D101S)
+ fw_name = FIRMWARE_D101S;
+ else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
+ fw_name = FIRMWARE_D102E;
+ else /* No ucode on other devices */
+ return NULL;
+
+ /* If the firmware has not previously been loaded, request a pointer
+ * to it. If it was previously loaded, we are reinitializing the
+ * adapter, possibly in a resume from hibernate, in which case
+ * request_firmware() cannot be used.
+ */
+ if (!fw)
+ err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+
+ if (err) {
+ DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
+ return ERR_PTR(err);
+ }
+
+ /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
+ indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
+ if (fw->size != UCODE_SIZE * 4 + 3) {
+ DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
+ min_size >= UCODE_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* OK, firmware is validated and ready to use. Save a pointer
+ * to it in the nic */
+ nic->fw = fw;
+ return fw;
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ const struct firmware *fw = (void *)skb;
+ u8 timer, bundle, min_size;
+
+ /* It's not a real skb; we just abused the fact that e100_exec_cb
+ will pass it through to here... */
+ cb->skb = NULL;
+
+ /* firmware is stored as little endian already */
+ memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ /* Insert user-tunable settings in cb->u.ucode */
+ cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
+ cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
+ cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
+
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+}
+
+static inline int e100_load_ucode_wait(struct nic *nic)
+{
+ const struct firmware *fw;
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ fw = e100_request_firmware(nic);
+ /* If it's NULL, then no ucode is required */
+ if (!fw || IS_ERR(fw))
+ return PTR_ERR(fw);
+
+ if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
+}
+
+static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_iaaddr);
+ memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+}
+
+static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_dump);
+ cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
+ offsetof(struct mem, dump_buf));
+}
+
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+ u8 phy_type;
+ int without_mii;
+
+ phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+ switch (phy_type) {
+ case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
+ case I82503: /* Non-MII PHY; UNTESTED! */
+ case S80C24: /* Non-MII PHY; tested and working */
+ /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+ * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+ * doesn't have a programming interface of any sort. The
+ * media is sensed automatically based on how the link partner
+ * is configured. This is, in essence, manual configuration.
+ */
+ DPRINTK(PROBE, INFO,
+ "found MII-less i82503 or 80c24 or other PHY\n");
+
+ nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+ nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+ /* these might be needed for certain MII-less cards...
+ * nic->flags |= ich;
+ * nic->flags |= ich_10h_workaround; */
+
+ without_mii = 1;
+ break;
+ default:
+ without_mii = 0;
+ break;
+ }
+ return without_mii;
+}
+
+#define NCONFIG_AUTO_SWITCH 0x0080
+#define MII_NSC_CONG MII_RESV1
+#define NSC_CONG_ENABLE 0x0100
+#define NSC_CONG_TXREADY 0x0400
+#define ADVERTISE_FC_SUPPORTED 0x0400
+static int e100_phy_init(struct nic *nic)
+{
+ struct net_device *netdev = nic->netdev;
+ u32 addr;
+ u16 bmcr, stat, id_lo, id_hi, cong;
+
+ /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
+ for (addr = 0; addr < 32; addr++) {
+ nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ break;
+ }
+ if (addr == 32) {
+ /* uhoh, no PHY detected: check whether we seem to be some
+ * weird, rare variant which is *known* to not have any MII.
+ * But do this AFTER MII checking only, since this does
+ * lookup of EEPROM values which may easily be unreliable. */
+ if (e100_phy_check_without_mii(nic))
+ return 0; /* simply return and hope for the best */
+ else {
+ /* for unknown cases log a fatal error */
+ DPRINTK(HW, ERR,
+ "Failed to locate any known PHY, aborting.\n");
+ return -EAGAIN;
+ }
+ } else
+ DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
+
+ /* Get phy ID */
+ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
+ id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
+ nic->phy = (u32)id_hi << 16 | (u32)id_lo;
+ DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+
+ /* Select the phy and isolate the rest */
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else if (nic->phy != phy_82552_v) {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+ /*
+ * Workaround for 82552:
+ * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+ * other phy_id's) using bmcr value from addr discovery loop above.
+ */
+ if (nic->phy == phy_82552_v)
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+
+ /* Handle National tx phys */
+#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
+ if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ /* Disable congestion control */
+ cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
+ cong |= NSC_CONG_TXREADY;
+ cong &= ~NSC_CONG_ENABLE;
+ mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
+ }
+
+ if (nic->phy == phy_82552_v) {
+ u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
+
+ /* assign special tweaked mdio_ctrl() function */
+ nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
+ /* Workaround Si not advertising flow-control during autoneg */
+ advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
+
+ /* Reset for the above changes to take effect */
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ bmcr |= BMCR_RESET;
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
+ } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
+ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
+
+ return 0;
+}
+
+static int e100_hw_init(struct nic *nic)
+{
+ int err;
+
+ e100_hw_reset(nic);
+
+ DPRINTK(HW, ERR, "e100_hw_init\n");
+ if (!in_interrupt() && (err = e100_self_test(nic)))
+ return err;
+
+ if ((err = e100_phy_init(nic)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ return err;
+ if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ return err;
+ if ((err = e100_load_ucode_wait(nic)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_configure)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_addr,
+ nic->dma_addr + offsetof(struct mem, stats))))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ return err;
+
+ e100_disable_irq(nic);
+
+ return 0;
+}
+
+static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct net_device *netdev = nic->netdev;
+ struct dev_mc_list *list = netdev->mc_list;
+ u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
+
+ cb->command = cpu_to_le16(cb_multi);
+ cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
+ for (i = 0; list && i < count; i++, list = list->next)
+ memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
+ ETH_ALEN);
+}
+
+static void e100_set_multicast_list(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
+ netdev->mc_count, netdev->flags);
+
+ if (netdev->flags & IFF_PROMISC)
+ nic->flags |= promiscuous;
+ else
+ nic->flags &= ~promiscuous;
+
+ if (netdev->flags & IFF_ALLMULTI ||
+ netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
+ nic->flags |= multicast_all;
+ else
+ nic->flags &= ~multicast_all;
+
+ e100_exec_cb(nic, NULL, e100_configure);
+ e100_exec_cb(nic, NULL, e100_multi);
+}
+
+static void e100_update_stats(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
+ struct stats *s = &nic->mem->stats;
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
+ &s->complete;
+
+ /* Device's stats reporting may take several microseconds to
+ * complete, so we're always waiting for results of the
+ * previous command. */
+
+ if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
+ *complete = 0;
+ nic->tx_frames = le32_to_cpu(s->tx_good_frames);
+ nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
+ ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
+ ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
+ ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
+ ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
+ ns->collisions += nic->tx_collisions;
+ ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
+ le32_to_cpu(s->tx_lost_crs);
+ ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+ nic->rx_over_length_errors;
+ ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
+ ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
+ ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
+ ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
+ le32_to_cpu(s->rx_alignment_errors) +
+ le32_to_cpu(s->rx_short_frame_errors) +
+ le32_to_cpu(s->rx_cdt_errors);
+ nic->tx_deferred += le32_to_cpu(s->tx_deferred);
+ nic->tx_single_collisions +=
+ le32_to_cpu(s->tx_single_collisions);
+ nic->tx_multiple_collisions +=
+ le32_to_cpu(s->tx_multiple_collisions);
+ if (nic->mac >= mac_82558_D101_A4) {
+ nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
+ nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
+ nic->rx_fc_unsupported +=
+ le32_to_cpu(s->fc_rcv_unsupported);
+ if (nic->mac >= mac_82559_D101M) {
+ nic->tx_tco_frames +=
+ le16_to_cpu(s->xmt_tco_frames);
+ nic->rx_tco_frames +=
+ le16_to_cpu(s->rcv_tco_frames);
+ }
+ }
+ }
+
+
+ if (e100_exec_cmd(nic, cuc_dump_reset, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
+}
+
+static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
+{
+ /* Adjust inter-frame-spacing (IFS) between two transmits if
+ * we're getting collisions on a half-duplex connection. */
+
+ if (duplex == DUPLEX_HALF) {
+ u32 prev = nic->adaptive_ifs;
+ u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
+
+ if ((nic->tx_frames / 32 < nic->tx_collisions) &&
+ (nic->tx_frames > min_frames)) {
+ if (nic->adaptive_ifs < 60)
+ nic->adaptive_ifs += 5;
+ } else if (nic->tx_frames < min_frames) {
+ if (nic->adaptive_ifs >= 5)
+ nic->adaptive_ifs -= 5;
+ }
+ if (nic->adaptive_ifs != prev)
+ e100_exec_cb(nic, NULL, e100_configure);
+ }
+}
+
+static void e100_watchdog(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ struct ethtool_cmd cmd;
+
+ DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
+
+ /* mii library handles link maintenance tasks */
+
+ if (nic->ecdev) {
+ ecdev_set_link(nic->ecdev, mii_link_ok(&nic->mii) ? 1 : 0);
+ } else {
+ mii_ethtool_gset(&nic->mii, &cmd);
+
+ if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n",
+ nic->netdev->name,
+ cmd.speed == SPEED_100 ? "100" : "10",
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
+ } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Down\n",
+ nic->netdev->name);
+ }
+
+ mii_check_link(&nic->mii);
+
+ /* Software generated interrupt to recover from (rare) Rx
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
+ spin_lock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
+
+ e100_update_stats(nic);
+ e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+
+ if (nic->mac <= mac_82557_D100_C)
+ /* Issue a multicast command to workaround a 557 lock up */
+ e100_set_multicast_list(nic->netdev);
+
+ if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
+ nic->flags |= ich_10h_workaround;
+ else
+ nic->flags &= ~ich_10h_workaround;
+
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
+ }
+}
+
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if ((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
+ cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
+ cb->u.tcb.tcb_byte_count = 0;
+ cb->u.tcb.threshold = nic->tx_threshold;
+ cb->u.tcb.tbd_count = 1;
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+ /* check for mapping failure? */
+ cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
+}
+
+static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ if (nic->flags & ich_10h_workaround) {
+ /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
+ Issue a NOP command followed by a 1us delay before
+ issuing the Tx command. */
+ if (e100_exec_cmd(nic, cuc_nop, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
+ udelay(1);
+ }
+
+ err = e100_exec_cb(nic, skb, e100_xmit_prepare);
+
+ switch (err) {
+ case -ENOSPC:
+ /* We queued the skb, but now we're out of space. */
+ DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
+ if (!nic->ecdev)
+ netif_stop_queue(netdev);
+ break;
+ case -ENOMEM:
+ /* This is a hard error - log it. */
+ DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
+ if (!nic->ecdev)
+ netif_stop_queue(netdev);
+ return NETDEV_TX_BUSY;
+ }
+
+ netdev->trans_start = jiffies;
+ return NETDEV_TX_OK;
+}
+
+static int e100_tx_clean(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct cb *cb;
+ int tx_cleaned = 0;
+
+ if (!nic->ecdev)
+ spin_lock(&nic->cb_lock);
+
+ /* Clean CBs marked complete */
+ for (cb = nic->cb_to_clean;
+ cb->status & cpu_to_le16(cb_complete);
+ cb = nic->cb_to_clean = cb->next) {
+ DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if (likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
+
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ if (!nic->ecdev)
+ dev_kfree_skb_any(cb->skb);
+ cb->skb = NULL;
+ tx_cleaned = 1;
+ }
+ cb->status = 0;
+ nic->cbs_avail++;
+ }
+
+ if (!nic->ecdev) {
+ spin_unlock(&nic->cb_lock);
+
+ /* Recover from running out of Tx resources in xmit_frame */
+ if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ netif_wake_queue(nic->netdev);
+ }
+
+ return tx_cleaned;
+}
+
+static void e100_clean_cbs(struct nic *nic)
+{
+ if (nic->cbs) {
+ while (nic->cbs_avail != nic->params.cbs.count) {
+ struct cb *cb = nic->cb_to_clean;
+ if (cb->skb) {
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ if (!nic->ecdev)
+ dev_kfree_skb(cb->skb);
+ }
+ nic->cb_to_clean = nic->cb_to_clean->next;
+ nic->cbs_avail++;
+ }
+ pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
+ nic->cbs = NULL;
+ nic->cbs_avail = 0;
+ }
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
+ nic->cbs;
+}
+
+static int e100_alloc_cbs(struct nic *nic)
+{
+ struct cb *cb;
+ unsigned int i, count = nic->params.cbs.count;
+
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
+ nic->cbs_avail = 0;
+
+ nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+ &nic->cbs_dma_addr);
+ if (!nic->cbs)
+ return -ENOMEM;
+ memset(nic->cbs, 0, count * sizeof(struct cb));
+
+ for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
+ cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
+
+ cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
+ cb->link = cpu_to_le32(nic->cbs_dma_addr +
+ ((i+1) % count) * sizeof(struct cb));
+ }
+
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
+ nic->cbs_avail = count;
+
+ return 0;
+}
+
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
+{
+ if (!nic->rxs) return;
+ if (RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if (!rx) rx = nic->rxs;
+
+ /* (Re)start RU if suspended or idle and RFA is non-NULL */
+ if (rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
+ }
+}
+
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+{
+ if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
+ return -ENOMEM;
+
+ /* Init, and map the RFD. */
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = NULL;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ }
+
+ return 0;
+}
+
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
+ unsigned int *work_done, unsigned int work_to_do)
+{
+ struct net_device *dev = nic->netdev;
+ struct sk_buff *skb = rx->skb;
+ struct rfd *rfd = (struct rfd *)skb->data;
+ u16 rfd_status, actual_size;
+
+ if (unlikely(work_done && *work_done >= work_to_do))
+ return -EAGAIN;
+
+ /* Need to sync before taking a peek at cb_complete bit */
+ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ rfd_status = le16_to_cpu(rfd->status);
+
+ DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
+
+ /* If data isn't ready, nothing to indicate */
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_FROMDEVICE);
+ return -ENODATA;
+ }
+
+ /* Get actual data size */
+ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
+ if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+
+ /* Get data */
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ }
+
+ if (!nic->ecdev) {
+ /* Pull off the RFD and put the actual data (minus eth hdr) */
+ skb_reserve(skb, sizeof(struct rfd));
+ skb_put(skb, actual_size);
+ skb->protocol = eth_type_trans(skb, nic->netdev);
+ }
+
+ if (unlikely(!(rfd_status & cb_ok))) {
+ if (!nic->ecdev) {
+ /* Don't indicate if hardware indicates errors */
+ dev_kfree_skb_any(skb);
+ }
+ } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+ /* Don't indicate oversized frames */
+ nic->rx_over_length_errors++;
+ if (!nic->ecdev)
+ dev_kfree_skb_any(skb);
+ } else {
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
+ if (nic->ecdev) {
+ ecdev_receive(nic->ecdev,
+ skb->data + sizeof(struct rfd), actual_size);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ nic->ec_watchdog_jiffies = jiffies;
+ } else {
+ netif_receive_skb(skb);
+ }
+ if (work_done)
+ (*work_done)++;
+ }
+
+ if (nic->ecdev) {
+ // make receive frame descriptior usable again
+ memcpy(skb->data, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ rx->dma_addr = 0;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_TODEVICE);
+ }
+ } else {
+ rx->skb = NULL;
+ }
+
+ return 0;
+}
+
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+ unsigned int work_to_do)
+{
+ struct rx *rx;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
+
+ /* Indicate newly arrived packets */
+ for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
+ break;
+ }
+
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
+
+ if (!nic->ecdev) {
+ /* Alloc new skbs to refill list */
+ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if(unlikely(e100_rx_alloc_skb(nic, rx)))
+ break; /* Better luck next time (see watchdog) */
+ }
+ }
+
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+
+ if (restart_required) {
+ // ack the rnr?
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if (work_done)
+ (*work_done)++;
+ }
+}
+
+static void e100_rx_clean_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (nic->rxs) {
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if (rx->skb) {
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ dev_kfree_skb(rx->skb);
+ }
+ }
+ kfree(nic->rxs);
+ nic->rxs = NULL;
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+}
+
+static int e100_rx_alloc_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
+ return -ENOMEM;
+
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
+ rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
+ if (e100_rx_alloc_skb(nic, rx)) {
+ e100_rx_clean_list(nic);
+ return -ENOMEM;
+ }
+ }
+
+ if (!nic->ecdev) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
+
+ return 0;
+}
+
+static irqreturn_t e100_intr(int irq, void *dev_id)
+{
+ struct net_device *netdev = dev_id;
+ struct nic *nic = netdev_priv(netdev);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
+
+ DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
+
+ if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ stat_ack == stat_ack_not_present) /* Hardware is ejected */
+ return IRQ_NONE;
+
+ /* Ack interrupt(s) */
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
+
+ /* We hit Receive No Resource (RNR); restart RU after cleaning */
+ if (stat_ack & stat_ack_rnr)
+ nic->ru_running = RU_SUSPENDED;
+
+ if (!nic->ecdev && likely(napi_schedule_prep(&nic->napi))) {
+ e100_disable_irq(nic);
+ __napi_schedule(&nic->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+void e100_ec_poll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_rx_clean(nic, NULL, 100);
+ e100_tx_clean(nic);
+
+ if (jiffies - nic->ec_watchdog_jiffies >= 2 * HZ) {
+ e100_watchdog((unsigned long) nic);
+ nic->ec_watchdog_jiffies = jiffies;
+ }
+}
+
+
+static int e100_poll(struct napi_struct *napi, int budget)
+{
+ struct nic *nic = container_of(napi, struct nic, napi);
+ unsigned int work_done = 0;
+
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ e100_enable_irq(nic);
+ }
+
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_disable_irq(nic);
+ e100_intr(nic->pdev->irq, netdev);
+ e100_tx_clean(nic);
+ e100_enable_irq(nic);
+}
+#endif
+
+static int e100_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ e100_exec_cb(nic, NULL, e100_setup_iaaddr);
+
+ return 0;
+}
+
+static int e100_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+static int e100_asf(struct nic *nic)
+{
+ /* ASF can be enabled from eeprom */
+ return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
+ (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
+ !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
+ ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
+}
+
+static int e100_up(struct nic *nic)
+{
+ int err;
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_rx_clean_list;
+ if ((err = e100_hw_init(nic)))
+ goto err_clean_cbs;
+ e100_set_multicast_list(nic->netdev);
+ e100_start_receiver(nic, NULL);
+ if (!nic->ecdev) {
+ mod_timer(&nic->watchdog, jiffies);
+ }
+ if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
+ nic->netdev->name, nic->netdev)))
+ goto err_no_irq;
+ if (!nic->ecdev) {
+ netif_wake_queue(nic->netdev);
+ napi_enable(&nic->napi);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
+ }
+ return 0;
+
+err_no_irq:
+ if (!nic->ecdev)
+ del_timer_sync(&nic->watchdog);
+err_clean_cbs:
+ e100_clean_cbs(nic);
+err_rx_clean_list:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+static void e100_down(struct nic *nic)
+{
+ if (!nic->ecdev) {
+ /* wait here for poll to complete */
+ napi_disable(&nic->napi);
+ netif_stop_queue(nic->netdev);
+ }
+ e100_hw_reset(nic);
+ free_irq(nic->pdev->irq, nic->netdev);
+ if (!nic->ecdev) {
+ del_timer_sync(&nic->watchdog);
+ netif_carrier_off(nic->netdev);
+ }
+ e100_clean_cbs(nic);
+ e100_rx_clean_list(nic);
+}
+
+static void e100_tx_timeout(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct work_struct *work)
+{
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
+
+ DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
+ ioread8(&nic->csr->scb.status));
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+}
+
+static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
+{
+ int err;
+ struct sk_buff *skb;
+
+ /* Use driver resources to perform internal MAC or PHY
+ * loopback test. A single packet is prepared and transmitted
+ * in loopback mode, and the test passes if the received
+ * packet compares byte-for-byte to the transmitted packet. */
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_clean_rx;
+
+ /* ICH PHY loopback is broken so do MAC loopback instead */
+ if (nic->flags & ich && loopback_mode == lb_phy)
+ loopback_mode = lb_mac;
+
+ nic->loopback = loopback_mode;
+ if ((err = e100_hw_init(nic)))
+ goto err_loopback_none;
+
+ if (loopback_mode == lb_phy)
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
+ BMCR_LOOPBACK);
+
+ e100_start_receiver(nic, NULL);
+
+ if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
+ err = -ENOMEM;
+ goto err_loopback_none;
+ }
+ skb_put(skb, ETH_DATA_LEN);
+ memset(skb->data, 0xFF, ETH_DATA_LEN);
+ e100_xmit_frame(skb, nic->netdev);
+
+ msleep(10);
+
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ skb->data, ETH_DATA_LEN))
+ err = -EAGAIN;
+
+err_loopback_none:
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
+ nic->loopback = lb_none;
+ e100_clean_cbs(nic);
+ e100_hw_reset(nic);
+err_clean_rx:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+#define MII_LED_CONTROL 0x1B
+#define E100_82552_LED_OVERRIDE 0x19
+#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
+#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
+static void e100_blink_led(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
+ u16 led_reg = MII_LED_CONTROL;
+
+ if (nic->phy == phy_82552_v) {
+ led_reg = E100_82552_LED_OVERRIDE;
+
+ nic->leds = (nic->leds == E100_82552_LED_ON) ?
+ E100_82552_LED_OFF : E100_82552_LED_ON;
+ } else {
+ nic->leds = (nic->leds & led_on) ? led_off :
+ (nic->mac < mac_82559_D101M) ? led_on_557 :
+ led_on_559;
+ }
+ mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds);
+ mod_timer(&nic->blink_timer, jiffies + HZ / 4);
+}
+
+static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_ethtool_gset(&nic->mii, cmd);
+}
+
+static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
+ err = mii_ethtool_sset(&nic->mii, cmd);
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return err;
+}
+
+static void e100_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct nic *nic = netdev_priv(netdev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(nic->pdev));
+}
+
+#define E100_PHY_REGS 0x1C
+static int e100_get_regs_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+}
+
+static void e100_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u32 *buff = p;
+ int i;
+
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for (i = E100_PHY_REGS; i >= 0; i--)
+ buff[1 + E100_PHY_REGS - i] =
+ mdio_read(netdev, nic->mii.phy_id, i);
+ memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
+ e100_exec_cb(nic, NULL, e100_dump);
+ msleep(10);
+ memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
+ sizeof(nic->mem->dump_buf));
+}
+
+static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+ wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
+ wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
+}
+
+static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
+ return -EOPNOTSUPP;
+
+ if (wol->wolopts)
+ nic->flags |= wol_magic;
+ else
+ nic->flags &= ~wol_magic;
+
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return 0;
+}
+
+static u32 e100_get_msglevel(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->msg_enable;
+}
+
+static void e100_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct nic *nic = netdev_priv(netdev);
+ nic->msg_enable = value;
+}
+
+static int e100_nway_reset(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_nway_restart(&nic->mii);
+}
+
+static u32 e100_get_link(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_link_ok(&nic->mii);
+}
+
+static int e100_get_eeprom_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->eeprom_wc << 1;
+}
+
+#define E100_EEPROM_MAGIC 0x1234
+static int e100_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ eeprom->magic = E100_EEPROM_MAGIC;
+ memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+static int e100_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if (eeprom->magic != E100_EEPROM_MAGIC)
+ return -EINVAL;
+
+ memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
+
+ return e100_eeprom_save(nic, eeprom->offset >> 1,
+ (eeprom->len >> 1) + 1);
+}
+
+static void e100_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ ring->rx_max_pending = rfds->max;
+ ring->tx_max_pending = cbs->max;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rfds->count;
+ ring->tx_pending = cbs->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e100_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ rfds->count = max(ring->rx_pending, rfds->min);
+ rfds->count = min(rfds->count, rfds->max);
+ cbs->count = max(ring->tx_pending, cbs->min);
+ cbs->count = min(cbs->count, cbs->max);
+ DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+
+static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)",
+ "Eeprom test (on/offline)",
+ "Self test (offline)",
+ "Mac loopback (offline)",
+ "Phy loopback (offline)",
+};
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
+
+static void e100_diag_test(struct net_device *netdev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct ethtool_cmd cmd;
+ struct nic *nic = netdev_priv(netdev);
+ int i, err;
+
+ memset(data, 0, E100_TEST_LEN * sizeof(u64));
+ data[0] = !mii_link_ok(&nic->mii);
+ data[1] = e100_eeprom_load(nic);
+ if (test->flags & ETH_TEST_FL_OFFLINE) {
+
+ /* save speed, duplex & autoneg settings */
+ err = mii_ethtool_gset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ data[2] = e100_self_test(nic);
+ data[3] = e100_loopback_test(nic, lb_mac);
+ data[4] = e100_loopback_test(nic, lb_phy);
+
+ /* restore speed, duplex & autoneg settings */
+ err = mii_ethtool_sset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_up(nic);
+ }
+ for (i = 0; i < E100_TEST_LEN; i++)
+ test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
+}
+
+static int e100_phys_id(struct net_device *netdev, u32 data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
+ MII_LED_CONTROL;
+
+ if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ mod_timer(&nic->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&nic->blink_timer);
+ mdio_write(netdev, nic->mii.phy_id, led_reg, 0);
+
+ return 0;
+}
+
+static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
+ "tx_flow_control_pause", "rx_flow_control_pause",
+ "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+};
+#define E100_NET_STATS_LEN 21
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
+
+static int e100_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e100_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
+
+ data[i++] = nic->tx_deferred;
+ data[i++] = nic->tx_single_collisions;
+ data[i++] = nic->tx_multiple_collisions;
+ data[i++] = nic->tx_fc_pause;
+ data[i++] = nic->rx_fc_pause;
+ data[i++] = nic->rx_fc_unsupported;
+ data[i++] = nic->tx_tco_frames;
+ data[i++] = nic->rx_tco_frames;
+}
+
+static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
+ break;
+ }
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .get_regs_len = e100_get_regs_len,
+ .get_regs = e100_get_regs,
+ .get_wol = e100_get_wol,
+ .set_wol = e100_set_wol,
+ .get_msglevel = e100_get_msglevel,
+ .set_msglevel = e100_set_msglevel,
+ .nway_reset = e100_nway_reset,
+ .get_link = e100_get_link,
+ .get_eeprom_len = e100_get_eeprom_len,
+ .get_eeprom = e100_get_eeprom,
+ .set_eeprom = e100_set_eeprom,
+ .get_ringparam = e100_get_ringparam,
+ .set_ringparam = e100_set_ringparam,
+ .self_test = e100_diag_test,
+ .get_strings = e100_get_strings,
+ .phys_id = e100_phys_id,
+ .get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
+};
+
+static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
+}
+
+static int e100_alloc(struct nic *nic)
+{
+ nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
+ &nic->dma_addr);
+ return nic->mem ? 0 : -ENOMEM;
+}
+
+static void e100_free(struct nic *nic)
+{
+ if (nic->mem) {
+ pci_free_consistent(nic->pdev, sizeof(struct mem),
+ nic->mem, nic->dma_addr);
+ nic->mem = NULL;
+ }
+}
+
+static int e100_open(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err = 0;
+
+ if (!nic->ecdev)
+ netif_carrier_off(netdev);
+ if ((err = e100_up(nic)))
+ DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
+ return err;
+}
+
+static int e100_close(struct net_device *netdev)
+{
+ e100_down(netdev_priv(netdev));
+ return 0;
+}
+
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_xmit_frame,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = e100_set_multicast_list,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_change_mtu = e100_change_mtu,
+ .ndo_do_ioctl = e100_do_ioctl,
+ .ndo_tx_timeout = e100_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
+static int __devinit e100_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct nic *nic;
+ int err;
+
+ if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if (((1 << debug) - 1) & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
+ return -ENOMEM;
+ }
+
+ netdev->netdev_ops = &e100_netdev_ops;
+ SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
+ netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
+ nic->netdev = netdev;
+ nic->pdev = pdev;
+ nic->msg_enable = (1 << debug) - 1;
+ nic->mdio_ctrl = mdio_ctrl_hw;
+ pci_set_drvdata(pdev, netdev);
+
+ if ((err = pci_enable_device(pdev))) {
+ DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_dev;
+ }
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
+ "base address, aborting.\n");
+ err = -ENODEV;
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_request_regions(pdev, DRV_NAME))) {
+ DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+ DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
+ goto err_out_free_res;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if (!nic->csr) {
+ DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+
+ if (ent->driver_data)
+ nic->flags |= ich;
+ else
+ nic->flags &= ~ich;
+
+ e100_get_defaults(nic);
+
+ /* locks must be initialized before calling hw_reset */
+ spin_lock_init(&nic->cb_lock);
+ spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
+
+ /* Reset the device before pci_set_master() in case device is in some
+ * funky state and has an interrupt pending - hint: we don't have the
+ * interrupt handler registered yet. */
+ e100_hw_reset(nic);
+
+ pci_set_master(pdev);
+
+ init_timer(&nic->watchdog);
+ nic->watchdog.function = e100_watchdog;
+ nic->watchdog.data = (unsigned long)nic;
+ init_timer(&nic->blink_timer);
+ nic->blink_timer.function = e100_blink_led;
+ nic->blink_timer.data = (unsigned long)nic;
+
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
+
+ if ((err = e100_alloc(nic))) {
+ DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
+ goto err_out_iounmap;
+ }
+
+ if ((err = e100_eeprom_load(nic)))
+ goto err_out_free;
+
+ e100_phy_init(nic);
+
+ memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from "
+ "EEPROM, aborting.\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
+ "you MUST configure one.\n");
+ }
+ }
+
+ /* Wol magic packet can be enabled from eeprom */
+ if ((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
+
+ /* ack any pending wake events, disable PME */
+ pci_pme_active(pdev, false);
+
+ // offer device to EtherCAT master module
+ nic->ecdev = ecdev_offer(netdev, e100_ec_poll, THIS_MODULE);
+ if (nic->ecdev) {
+ if (ecdev_open(nic->ecdev)) {
+ ecdev_withdraw(nic->ecdev);
+ goto err_out_free;
+ }
+ } else {
+ strcpy(netdev->name, "eth%d");
+ if((err = register_netdev(netdev))) {
+ DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
+ goto err_out_free;
+ }
+ nic->cbs_pool = pci_pool_create(netdev->name,
+ nic->pdev,
+ nic->params.cbs.max * sizeof(struct cb),
+ sizeof(u32),
+ 0);
+ }
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, netdev->dev_addr);
+
+ return 0;
+
+err_out_free:
+ e100_free(nic);
+err_out_iounmap:
+ pci_iounmap(pdev, nic->csr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+static void __devexit e100_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if (netdev) {
+ struct nic *nic = netdev_priv(netdev);
+ if (nic->ecdev) {
+ ecdev_close(nic->ecdev);
+ ecdev_withdraw(nic->ecdev);
+ } else {
+ unregister_netdev(netdev);
+ }
+
+ e100_free(nic);
+ pci_iounmap(pdev, nic->csr);
+ pci_pool_destroy(nic->cbs_pool);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
+#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
+#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
+static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ netif_device_detach(netdev);
+
+ pci_save_state(pdev);
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ /* enable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED, smartspeed |
+ E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
+ }
+ *enable_wake = true;
+ } else {
+ *enable_wake = false;
+ }
+
+ pci_disable_device(pdev);
+}
+
+static int __e100_power_off(struct pci_dev *pdev, bool wake)
+{
+ if (wake)
+ return pci_prepare_to_sleep(pdev);
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ return __e100_power_off(pdev, wake);
+}
+
+static int e100_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ /* disable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED,
+ smartspeed & ~(E100_82552_REV_ANEG));
+ }
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e100_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ if (system_state == SYSTEM_POWER_OFF)
+ __e100_power_off(pdev, wake);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (nic->ecdev)
+ return -EBUSY;
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (nic->ecdev)
+ return -EBUSY;
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ if (!nic->ecdev)
+ netif_device_attach(netdev);
+ if (nic->ecdev || netif_running(netdev)) {
+ e100_open(netdev);
+ if (!nic->ecdev)
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
+
+static struct pci_driver e100_driver = {
+ .name = DRV_NAME,
+ .id_table = e100_id_table,
+ .probe = e100_probe,
+ .remove = __devexit_p(e100_remove),
+#ifdef CONFIG_PM
+ /* Power Management hooks */
+ .suspend = e100_suspend,
+ .resume = e100_resume,
+#endif
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
+};
+
+static int __init e100_init_module(void)
+{
+ printk(KERN_INFO DRV_NAME " " DRV_DESCRIPTION " " DRV_VERSION
+ ", master " EC_MASTER_VERSION "\n");
+
+ return pci_register_driver(&e100_driver);
+}
+
+static void __exit e100_cleanup_module(void)
+{
+ printk(KERN_INFO DRV_NAME " cleaning up module...\n");
+ pci_unregister_driver(&e100_driver);
+ printk(KERN_INFO DRV_NAME " module cleaned up.\n");
+}
+
+module_init(e100_init_module);
+module_exit(e100_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e100-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3091 @@
+/*******************************************************************************
+
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * e100.c: Intel(R) PRO/100 ethernet driver
+ *
+ * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
+ * original e100 driver, but better described as a munging of
+ * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
+ *
+ * References:
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family,
+ * Open Source Software Developers Manual,
+ * http://sourceforge.net/projects/e1000
+ *
+ *
+ * Theory of Operation
+ *
+ * I. General
+ *
+ * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
+ * controller family, which includes the 82557, 82558, 82559, 82550,
+ * 82551, and 82562 devices. 82558 and greater controllers
+ * integrate the Intel 82555 PHY. The controllers are used in
+ * server and client network interface cards, as well as in
+ * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
+ * configurations. 8255x supports a 32-bit linear addressing
+ * mode and operates at 33Mhz PCI clock rate.
+ *
+ * II. Driver Operation
+ *
+ * Memory-mapped mode is used exclusively to access the device's
+ * shared-memory structure, the Control/Status Registers (CSR). All
+ * setup, configuration, and control of the device, including queuing
+ * of Tx, Rx, and configuration commands is through the CSR.
+ * cmd_lock serializes accesses to the CSR command register. cb_lock
+ * protects the shared Command Block List (CBL).
+ *
+ * 8255x is highly MII-compliant and all access to the PHY go
+ * through the Management Data Interface (MDI). Consequently, the
+ * driver leverages the mii.c library shared with other MII-compliant
+ * devices.
+ *
+ * Big- and Little-Endian byte order as well as 32- and 64-bit
+ * archs are supported. Weak-ordered memory and non-cache-coherent
+ * archs are supported.
+ *
+ * III. Transmit
+ *
+ * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
+ * together in a fixed-size ring (CBL) thus forming the flexible mode
+ * memory structure. A TCB marked with the suspend-bit indicates
+ * the end of the ring. The last TCB processed suspends the
+ * controller, and the controller can be restarted by issue a CU
+ * resume command to continue from the suspend point, or a CU start
+ * command to start at a given position in the ring.
+ *
+ * Non-Tx commands (config, multicast setup, etc) are linked
+ * into the CBL ring along with Tx commands. The common structure
+ * used for both Tx and non-Tx commands is the Command Block (CB).
+ *
+ * cb_to_use is the next CB to use for queuing a command; cb_to_clean
+ * is the next CB to check for completion; cb_to_send is the first
+ * CB to start on in case of a previous failure to resume. CB clean
+ * up happens in interrupt context in response to a CU interrupt.
+ * cbs_avail keeps track of number of free CB resources available.
+ *
+ * Hardware padding of short packets to minimum packet size is
+ * enabled. 82557 pads with 7Eh, while the later controllers pad
+ * with 00h.
+ *
+ * IV. Receive
+ *
+ * The Receive Frame Area (RFA) comprises a ring of Receive Frame
+ * Descriptors (RFD) + data buffer, thus forming the simplified mode
+ * memory structure. Rx skbs are allocated to contain both the RFD
+ * and the data buffer, but the RFD is pulled off before the skb is
+ * indicated. The data buffer is aligned such that encapsulated
+ * protocol headers are u32-aligned. Since the RFD is part of the
+ * mapped shared memory, and completion status is contained within
+ * the RFD, the RFD must be dma_sync'ed to maintain a consistent
+ * view from software and hardware.
+ *
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
+ * Under typical operation, the receive unit (RU) is start once,
+ * and the controller happily fills RFDs as frames arrive. If
+ * replacement RFDs cannot be allocated, or the RU goes non-active,
+ * the RU must be restarted. Frame arrival generates an interrupt,
+ * and Rx indication and re-allocation happen in the same context,
+ * therefore no locking is required. A software-generated interrupt
+ * is generated from the watchdog to recover from a failed allocation
+ * scenario where all Rx resources have been indicated and none re-
+ * placed.
+ *
+ * V. Miscellaneous
+ *
+ * VLAN offloading of tagging, stripping and filtering is not
+ * supported, but driver will accommodate the extra 4-byte VLAN tag
+ * for processing by upper layers. Tx/Rx Checksum offloading is not
+ * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
+ * not supported (hardware limitation).
+ *
+ * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
+ *
+ * Thanks to JC (jchapman@katalix.com) for helping with
+ * testing/troubleshooting the development driver.
+ *
+ * TODO:
+ * o several entry points race with dev->close
+ * o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+
+
+#define DRV_NAME "e100"
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.24-k2"DRV_EXT
+#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
+#define PFX DRV_NAME ": "
+
+#define E100_WATCHDOG_PERIOD (2 * HZ)
+#define E100_NAPI_WEIGHT 16
+
+#define FIRMWARE_D101M "e100/d101m_ucode.bin"
+#define FIRMWARE_D101S "e100/d101s_ucode.bin"
+#define FIRMWARE_D102E "e100/d102e_ucode.bin"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_D101M);
+MODULE_FIRMWARE(FIRMWARE_D101S);
+MODULE_FIRMWARE(FIRMWARE_D102E);
+
+static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
+module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+ (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
+ __func__ , ## args))
+
+#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
+ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
+ PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
+static struct pci_device_id e100_id_table[] = {
+ INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, e100_id_table);
+
+enum mac {
+ mac_82557_D100_A = 0,
+ mac_82557_D100_B = 1,
+ mac_82557_D100_C = 2,
+ mac_82558_D101_A4 = 4,
+ mac_82558_D101_B0 = 5,
+ mac_82559_D101M = 8,
+ mac_82559_D101S = 9,
+ mac_82550_D102 = 12,
+ mac_82550_D102_C = 13,
+ mac_82551_E = 14,
+ mac_82551_F = 15,
+ mac_82551_10 = 16,
+ mac_unknown = 0xFF,
+};
+
+enum phy {
+ phy_100a = 0x000003E0,
+ phy_100c = 0x035002A8,
+ phy_82555_tx = 0x015002A8,
+ phy_nsc_tx = 0x5C002000,
+ phy_82562_et = 0x033002A8,
+ phy_82562_em = 0x032002A8,
+ phy_82562_ek = 0x031002A8,
+ phy_82562_eh = 0x017002A8,
+ phy_82552_v = 0xd061004d,
+ phy_unknown = 0xFFFFFFFF,
+};
+
+/* CSR (Control/Status Registers) */
+struct csr {
+ struct {
+ u8 status;
+ u8 stat_ack;
+ u8 cmd_lo;
+ u8 cmd_hi;
+ u32 gen_ptr;
+ } scb;
+ u32 port;
+ u16 flash_ctrl;
+ u8 eeprom_ctrl_lo;
+ u8 eeprom_ctrl_hi;
+ u32 mdi_ctrl;
+ u32 rx_dma_count;
+};
+
+enum scb_status {
+ rus_no_res = 0x08,
+ rus_ready = 0x10,
+ rus_mask = 0x3C,
+};
+
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+enum scb_cmd_hi {
+ irq_mask_none = 0x00,
+ irq_mask_all = 0x01,
+ irq_sw_gen = 0x02,
+};
+
+enum scb_cmd_lo {
+ cuc_nop = 0x00,
+ ruc_start = 0x01,
+ ruc_load_base = 0x06,
+ cuc_start = 0x10,
+ cuc_resume = 0x20,
+ cuc_dump_addr = 0x40,
+ cuc_dump_stats = 0x50,
+ cuc_load_base = 0x60,
+ cuc_dump_reset = 0x70,
+};
+
+enum cuc_dump {
+ cuc_dump_complete = 0x0000A005,
+ cuc_dump_reset_complete = 0x0000A007,
+};
+
+enum port {
+ software_reset = 0x0000,
+ selftest = 0x0001,
+ selective_reset = 0x0002,
+};
+
+enum eeprom_ctrl_lo {
+ eesk = 0x01,
+ eecs = 0x02,
+ eedi = 0x04,
+ eedo = 0x08,
+};
+
+enum mdi_ctrl {
+ mdi_write = 0x04000000,
+ mdi_read = 0x08000000,
+ mdi_ready = 0x10000000,
+};
+
+enum eeprom_op {
+ op_write = 0x05,
+ op_read = 0x06,
+ op_ewds = 0x10,
+ op_ewen = 0x13,
+};
+
+enum eeprom_offsets {
+ eeprom_cnfg_mdix = 0x03,
+ eeprom_phy_iface = 0x06,
+ eeprom_id = 0x0A,
+ eeprom_config_asf = 0x0D,
+ eeprom_smbus_addr = 0x90,
+};
+
+enum eeprom_cnfg_mdix {
+ eeprom_mdix_enabled = 0x0080,
+};
+
+enum eeprom_phy_iface {
+ NoSuchPhy = 0,
+ I82553AB,
+ I82553C,
+ I82503,
+ DP83840,
+ S80C240,
+ S80C24,
+ I82555,
+ DP83840A = 10,
+};
+
+enum eeprom_id {
+ eeprom_id_wol = 0x0020,
+};
+
+enum eeprom_config_asf {
+ eeprom_asf = 0x8000,
+ eeprom_gcl = 0x4000,
+};
+
+enum cb_status {
+ cb_complete = 0x8000,
+ cb_ok = 0x2000,
+};
+
+enum cb_command {
+ cb_nop = 0x0000,
+ cb_iaaddr = 0x0001,
+ cb_config = 0x0002,
+ cb_multi = 0x0003,
+ cb_tx = 0x0004,
+ cb_ucode = 0x0005,
+ cb_dump = 0x0006,
+ cb_tx_sf = 0x0008,
+ cb_cid = 0x1f00,
+ cb_i = 0x2000,
+ cb_s = 0x4000,
+ cb_el = 0x8000,
+};
+
+struct rfd {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
+};
+
+struct rx {
+ struct rx *next, *prev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+struct config {
+/*0*/ u8 X(byte_count:6, pad0:2);
+/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
+/*2*/ u8 adaptive_ifs;
+/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
+ term_write_cache_line:1), pad3:4);
+/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
+/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
+/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
+ tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
+ rx_discard_overruns:1), rx_save_bad_frames:1);
+/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
+ pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
+ tx_dynamic_tbd:1);
+/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
+/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
+ link_status_wake:1), arp_wake:1), mcmatch_wake:1);
+/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
+ loopback:2);
+/*11*/ u8 X(linear_priority:3, pad11:5);
+/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
+/*13*/ u8 ip_addr_lo;
+/*14*/ u8 ip_addr_hi;
+/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
+ wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
+ pad15_2:1), crs_or_cdt:1);
+/*16*/ u8 fc_delay_lo;
+/*17*/ u8 fc_delay_hi;
+/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
+ rx_long_ok:1), fc_priority_threshold:3), pad18:1);
+/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
+ fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
+ full_duplex_force:1), full_duplex_pin:1);
+/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
+/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
+/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
+ u8 pad_d102[9];
+};
+
+#define E100_MAX_MULTICAST_ADDRS 64
+struct multi {
+ __le16 count;
+ u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
+};
+
+/* Important: keep total struct u32-aligned */
+#define UCODE_SIZE 134
+struct cb {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ union {
+ u8 iaaddr[ETH_ALEN];
+ __le32 ucode[UCODE_SIZE];
+ struct config config;
+ struct multi multi;
+ struct {
+ u32 tbd_array;
+ u16 tcb_byte_count;
+ u8 threshold;
+ u8 tbd_count;
+ struct {
+ __le32 buf_addr;
+ __le16 size;
+ u16 eol;
+ } tbd;
+ } tcb;
+ __le32 dump_buffer_addr;
+ } u;
+ struct cb *next, *prev;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+enum loopback {
+ lb_none = 0, lb_mac = 1, lb_phy = 3,
+};
+
+struct stats {
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
+};
+
+struct mem {
+ struct {
+ u32 signature;
+ u32 result;
+ } selftest;
+ struct stats stats;
+ u8 dump_buf[596];
+};
+
+struct param_range {
+ u32 min;
+ u32 max;
+ u32 count;
+};
+
+struct params {
+ struct param_range rfds;
+ struct param_range cbs;
+};
+
+struct nic {
+ /* Begin: frequently used values: keep adjacent for cache effect */
+ u32 msg_enable ____cacheline_aligned;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
+
+ struct rx *rxs ____cacheline_aligned;
+ struct rx *rx_to_use;
+ struct rx *rx_to_clean;
+ struct rfd blank_rfd;
+ enum ru_state ru_running;
+
+ spinlock_t cb_lock ____cacheline_aligned;
+ spinlock_t cmd_lock;
+ struct csr __iomem *csr;
+ enum scb_cmd_lo cuc_cmd;
+ unsigned int cbs_avail;
+ struct napi_struct napi;
+ struct cb *cbs;
+ struct cb *cb_to_use;
+ struct cb *cb_to_send;
+ struct cb *cb_to_clean;
+ __le16 tx_command;
+ /* End: frequently used values: keep adjacent for cache effect */
+
+ enum {
+ ich = (1 << 0),
+ promiscuous = (1 << 1),
+ multicast_all = (1 << 2),
+ wol_magic = (1 << 3),
+ ich_10h_workaround = (1 << 4),
+ } flags ____cacheline_aligned;
+
+ enum mac mac;
+ enum phy phy;
+ struct params params;
+ struct timer_list watchdog;
+ struct timer_list blink_timer;
+ struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
+ enum loopback loopback;
+
+ struct mem *mem;
+ dma_addr_t dma_addr;
+
+ struct pci_pool *cbs_pool;
+ dma_addr_t cbs_dma_addr;
+ u8 adaptive_ifs;
+ u8 tx_threshold;
+ u32 tx_frames;
+ u32 tx_collisions;
+ u32 tx_deferred;
+ u32 tx_single_collisions;
+ u32 tx_multiple_collisions;
+ u32 tx_fc_pause;
+ u32 tx_tco_frames;
+
+ u32 rx_fc_pause;
+ u32 rx_fc_unsupported;
+ u32 rx_tco_frames;
+ u32 rx_over_length_errors;
+
+ u16 leds;
+ u16 eeprom_wc;
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
+ const struct firmware *fw;
+};
+
+static inline void e100_write_flush(struct nic *nic)
+{
+ /* Flush previous PCI writes through intermediate bridges
+ * by doing a benign read */
+ (void)ioread8(&nic->csr->scb.status);
+}
+
+static void e100_enable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_disable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_hw_reset(struct nic *nic)
+{
+ /* Put CU and RU into idle with a selective reset to get
+ * device off of PCI bus */
+ iowrite32(selective_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Now fully reset device */
+ iowrite32(software_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Mask off our interrupt line - it's unmasked after reset */
+ e100_disable_irq(nic);
+}
+
+static int e100_self_test(struct nic *nic)
+{
+ u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
+
+ /* Passing the self-test is a pretty good indication
+ * that the device can DMA to/from host memory */
+
+ nic->mem->selftest.signature = 0;
+ nic->mem->selftest.result = 0xFFFFFFFF;
+
+ iowrite32(selftest | dma_addr, &nic->csr->port);
+ e100_write_flush(nic);
+ /* Wait 10 msec for self-test to complete */
+ msleep(10);
+
+ /* Interrupts are enabled after self-test */
+ e100_disable_irq(nic);
+
+ /* Check results of self-test */
+ if (nic->mem->selftest.result != 0) {
+ DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
+ return -ETIMEDOUT;
+ }
+ if (nic->mem->selftest.signature == 0) {
+ DPRINTK(HW, ERR, "Self-test failed: timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
+{
+ u32 cmd_addr_data[3];
+ u8 ctrl;
+ int i, j;
+
+ /* Three cmds: write/erase enable, write data, write/erase disable */
+ cmd_addr_data[0] = op_ewen << (addr_len - 2);
+ cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+ le16_to_cpu(data);
+ cmd_addr_data[2] = op_ewds << (addr_len - 2);
+
+ /* Bit-bang cmds to write word to eeprom */
+ for (j = 0; j < 3; j++) {
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data[j] & (1 << i)) ?
+ eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+ /* Wait 10 msec for cmd to complete */
+ msleep(10);
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+};
+
+/* General technique stolen from the eepro100 driver - very clever */
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+{
+ u32 cmd_addr_data;
+ u16 data = 0;
+ u8 ctrl;
+ int i;
+
+ cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Bit-bang to read word from eeprom */
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Eeprom drives a dummy zero to EEDO after receiving
+ * complete address. Use this to adjust addr_len. */
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if (!(ctrl & eedo) && i > 16) {
+ *addr_len -= (i - 16);
+ i = 17;
+ }
+
+ data = (data << 1) | (ctrl & eedo ? 1 : 0);
+ }
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ return cpu_to_le16(data);
+};
+
+/* Load entire EEPROM image into driver cache and validate checksum */
+static int e100_eeprom_load(struct nic *nic)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ for (addr = 0; addr < nic->eeprom_wc; addr++) {
+ nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
+ if (addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ }
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
+ DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/* Save (portion of) driver EEPROM cache to device and update checksum */
+static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ if (start + count >= nic->eeprom_wc)
+ return -EINVAL;
+
+ for (addr = start; addr < start + count; addr++)
+ e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
+ e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+ nic->eeprom[nic->eeprom_wc - 1]);
+
+ return 0;
+}
+
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+{
+ unsigned long flags;
+ unsigned int i;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+
+ /* Previous command is accepted when SCB clears */
+ for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
+ break;
+ cpu_relax();
+ if (unlikely(i > E100_WAIT_SCB_FAST))
+ udelay(5);
+ }
+ if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ err = -EAGAIN;
+ goto err_unlock;
+ }
+
+ if (unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+
+ return err;
+}
+
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ struct cb *cb;
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cb_lock, flags);
+
+ if (unlikely(!nic->cbs_avail)) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cb = nic->cb_to_use;
+ nic->cb_to_use = cb->next;
+ nic->cbs_avail--;
+ cb->skb = skb;
+
+ if (unlikely(!nic->cbs_avail))
+ err = -ENOSPC;
+
+ cb_prepare(nic, cb, skb);
+
+ /* Order is important otherwise we'll be in a race with h/w:
+ * set S-bit in current first, then clear S-bit in previous. */
+ cb->command |= cpu_to_le16(cb_s);
+ wmb();
+ cb->prev->command &= cpu_to_le16(~cb_s);
+
+ while (nic->cb_to_send != nic->cb_to_use) {
+ if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ nic->cb_to_send->dma_addr))) {
+ /* Ok, here's where things get sticky. It's
+ * possible that we can't schedule the command
+ * because the controller is too busy, so
+ * let's just queue the command and try again
+ * when another command is scheduled. */
+ if (err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
+ break;
+ } else {
+ nic->cuc_cmd = cuc_resume;
+ nic->cb_to_send = nic->cb_to_send->next;
+ }
+ }
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cb_lock, flags);
+
+ return err;
+}
+
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+{
+ u32 data_out = 0;
+ unsigned int i;
+ unsigned long flags;
+
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
+ return (u16)data_out;
+}
+
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ if ((reg == MII_BMCR) && (dir == mdi_write)) {
+ if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+ u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+ MII_ADVERTISE);
+
+ /*
+ * Workaround Si issue where sometimes the part will not
+ * autoneg to 100Mbps even when advertised.
+ */
+ if (advert & ADVERTISE_100FULL)
+ data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+ else if (advert & ADVERTISE_100HALF)
+ data |= BMCR_SPEED100;
+ }
+ }
+ return mdio_ctrl_hw(nic, addr, dir, reg, data);
+}
+
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ /* might need to allocate a netdev_priv'ed register array eventually
+ * to be able to record state changes, but for now
+ * some fully hardcoded register handling ought to be ok I guess. */
+
+ if (dir == mdi_read) {
+ switch (reg) {
+ case MII_BMCR:
+ /* Auto-negotiation, right? */
+ return BMCR_ANENABLE |
+ BMCR_FULLDPLX;
+ case MII_BMSR:
+ return BMSR_LSTATUS /* for mii_link_ok() */ |
+ BMSR_ANEGCAPABLE |
+ BMSR_10FULL;
+ case MII_ADVERTISE:
+ /* 80c24 is a "combo card" PHY, right? */
+ return ADVERTISE_10HALF |
+ ADVERTISE_10FULL;
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
+ } else {
+ switch (reg) {
+ default:
+ DPRINTK(HW, DEBUG,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ return 0xFFFF;
+ }
+ }
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+ /* for now, just check it by comparing whether we
+ are using MII software emulation.
+ */
+ return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
+}
+
+static void e100_get_defaults(struct nic *nic)
+{
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
+
+ /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if (nic->mac == mac_unknown)
+ nic->mac = mac_82557_D100_A;
+
+ nic->params.rfds = rfds;
+ nic->params.cbs = cbs;
+
+ /* Quadwords to DMA into FIFO before starting frame transmit */
+ nic->tx_threshold = 0xE0;
+
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
+
+ /* Template for a freshly allocated RFD */
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
+ nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+
+ /* MII setup */
+ nic->mii.phy_id_mask = 0x1F;
+ nic->mii.reg_num_mask = 0x1F;
+ nic->mii.dev = nic->netdev;
+ nic->mii.mdio_read = mdio_read;
+ nic->mii.mdio_write = mdio_write;
+}
+
+static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct config *config = &cb->u.config;
+ u8 *c = (u8 *)config;
+
+ cb->command = cpu_to_le16(cb_config);
+
+ memset(config, 0, sizeof(struct config));
+
+ config->byte_count = 0x16; /* bytes in this struct */
+ config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
+ config->direct_rx_dma = 0x1; /* reserved */
+ config->standard_tcb = 0x1; /* 1=standard, 0=extended */
+ config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
+ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
+ config->tx_underrun_retry = 0x3; /* # of underrun retries */
+ if (e100_phy_supports_mii(nic))
+ config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
+ config->pad10 = 0x6;
+ config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
+ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
+ config->ifs = 0x6; /* x16 = inter frame spacing */
+ config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
+ config->pad15_1 = 0x1;
+ config->pad15_2 = 0x1;
+ config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
+ config->fc_delay_hi = 0x40; /* time delay for fc frame */
+ config->tx_padding = 0x1; /* 1=pad short frames */
+ config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
+ config->pad18 = 0x1;
+ config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
+ config->pad20_1 = 0x1F;
+ config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
+ config->pad21_1 = 0x5;
+
+ config->adaptive_ifs = nic->adaptive_ifs;
+ config->loopback = nic->loopback;
+
+ if (nic->mii.force_media && nic->mii.full_duplex)
+ config->full_duplex_force = 0x1; /* 1=force, 0=auto */
+
+ if (nic->flags & promiscuous || nic->loopback) {
+ config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
+ config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
+ config->promiscuous_mode = 0x1; /* 1=on, 0=off */
+ }
+
+ if (nic->flags & multicast_all)
+ config->multicast_all = 0x1; /* 1=accept, 0=no */
+
+ /* disable WoL when up */
+ if (netif_running(nic->netdev) || !(nic->flags & wol_magic))
+ config->magic_packet_disable = 0x1; /* 1=off, 0=on */
+
+ if (nic->mac >= mac_82558_D101_A4) {
+ config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
+ config->mwi_enable = 0x1; /* 1=enable, 0=disable */
+ config->standard_tcb = 0x0; /* 1=standard, 0=extended */
+ config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
+ if (nic->mac >= mac_82559_D101M) {
+ config->tno_intr = 0x1; /* TCO stats enable */
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
+ config->standard_stat_counter = 0x0;
+ }
+ }
+
+ DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+}
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+/* Initialize firmware */
+static const struct firmware *e100_request_firmware(struct nic *nic)
+{
+ const char *fw_name;
+ const struct firmware *fw = nic->fw;
+ u8 timer, bundle, min_size;
+ int err = 0;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return NULL;
+
+ /* Search for ucode match against h/w revision */
+ if (nic->mac == mac_82559_D101M)
+ fw_name = FIRMWARE_D101M;
+ else if (nic->mac == mac_82559_D101S)
+ fw_name = FIRMWARE_D101S;
+ else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
+ fw_name = FIRMWARE_D102E;
+ else /* No ucode on other devices */
+ return NULL;
+
+ /* If the firmware has not previously been loaded, request a pointer
+ * to it. If it was previously loaded, we are reinitializing the
+ * adapter, possibly in a resume from hibernate, in which case
+ * request_firmware() cannot be used.
+ */
+ if (!fw)
+ err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+
+ if (err) {
+ DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
+ return ERR_PTR(err);
+ }
+
+ /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
+ indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
+ if (fw->size != UCODE_SIZE * 4 + 3) {
+ DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
+ min_size >= UCODE_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* OK, firmware is validated and ready to use. Save a pointer
+ * to it in the nic */
+ nic->fw = fw;
+ return fw;
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ const struct firmware *fw = (void *)skb;
+ u8 timer, bundle, min_size;
+
+ /* It's not a real skb; we just abused the fact that e100_exec_cb
+ will pass it through to here... */
+ cb->skb = NULL;
+
+ /* firmware is stored as little endian already */
+ memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ /* Insert user-tunable settings in cb->u.ucode */
+ cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
+ cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
+ cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
+
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+}
+
+static inline int e100_load_ucode_wait(struct nic *nic)
+{
+ const struct firmware *fw;
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ fw = e100_request_firmware(nic);
+ /* If it's NULL, then no ucode is required */
+ if (!fw || IS_ERR(fw))
+ return PTR_ERR(fw);
+
+ if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
+}
+
+static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_iaaddr);
+ memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+}
+
+static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_dump);
+ cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
+ offsetof(struct mem, dump_buf));
+}
+
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+ u8 phy_type;
+ int without_mii;
+
+ phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+ switch (phy_type) {
+ case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
+ case I82503: /* Non-MII PHY; UNTESTED! */
+ case S80C24: /* Non-MII PHY; tested and working */
+ /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+ * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+ * doesn't have a programming interface of any sort. The
+ * media is sensed automatically based on how the link partner
+ * is configured. This is, in essence, manual configuration.
+ */
+ DPRINTK(PROBE, INFO,
+ "found MII-less i82503 or 80c24 or other PHY\n");
+
+ nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+ nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+ /* these might be needed for certain MII-less cards...
+ * nic->flags |= ich;
+ * nic->flags |= ich_10h_workaround; */
+
+ without_mii = 1;
+ break;
+ default:
+ without_mii = 0;
+ break;
+ }
+ return without_mii;
+}
+
+#define NCONFIG_AUTO_SWITCH 0x0080
+#define MII_NSC_CONG MII_RESV1
+#define NSC_CONG_ENABLE 0x0100
+#define NSC_CONG_TXREADY 0x0400
+#define ADVERTISE_FC_SUPPORTED 0x0400
+static int e100_phy_init(struct nic *nic)
+{
+ struct net_device *netdev = nic->netdev;
+ u32 addr;
+ u16 bmcr, stat, id_lo, id_hi, cong;
+
+ /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
+ for (addr = 0; addr < 32; addr++) {
+ nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ break;
+ }
+ if (addr == 32) {
+ /* uhoh, no PHY detected: check whether we seem to be some
+ * weird, rare variant which is *known* to not have any MII.
+ * But do this AFTER MII checking only, since this does
+ * lookup of EEPROM values which may easily be unreliable. */
+ if (e100_phy_check_without_mii(nic))
+ return 0; /* simply return and hope for the best */
+ else {
+ /* for unknown cases log a fatal error */
+ DPRINTK(HW, ERR,
+ "Failed to locate any known PHY, aborting.\n");
+ return -EAGAIN;
+ }
+ } else
+ DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
+
+ /* Get phy ID */
+ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
+ id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
+ nic->phy = (u32)id_hi << 16 | (u32)id_lo;
+ DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+
+ /* Select the phy and isolate the rest */
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else if (nic->phy != phy_82552_v) {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+ /*
+ * Workaround for 82552:
+ * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+ * other phy_id's) using bmcr value from addr discovery loop above.
+ */
+ if (nic->phy == phy_82552_v)
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+
+ /* Handle National tx phys */
+#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
+ if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ /* Disable congestion control */
+ cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
+ cong |= NSC_CONG_TXREADY;
+ cong &= ~NSC_CONG_ENABLE;
+ mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
+ }
+
+ if (nic->phy == phy_82552_v) {
+ u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
+
+ /* assign special tweaked mdio_ctrl() function */
+ nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
+ /* Workaround Si not advertising flow-control during autoneg */
+ advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
+
+ /* Reset for the above changes to take effect */
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ bmcr |= BMCR_RESET;
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
+ } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
+ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
+
+ return 0;
+}
+
+static int e100_hw_init(struct nic *nic)
+{
+ int err;
+
+ e100_hw_reset(nic);
+
+ DPRINTK(HW, ERR, "e100_hw_init\n");
+ if (!in_interrupt() && (err = e100_self_test(nic)))
+ return err;
+
+ if ((err = e100_phy_init(nic)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ return err;
+ if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ return err;
+ if ((err = e100_load_ucode_wait(nic)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_configure)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_addr,
+ nic->dma_addr + offsetof(struct mem, stats))))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ return err;
+
+ e100_disable_irq(nic);
+
+ return 0;
+}
+
+static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct net_device *netdev = nic->netdev;
+ struct dev_mc_list *list = netdev->mc_list;
+ u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS);
+
+ cb->command = cpu_to_le16(cb_multi);
+ cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
+ for (i = 0; list && i < count; i++, list = list->next)
+ memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
+ ETH_ALEN);
+}
+
+static void e100_set_multicast_list(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
+ netdev->mc_count, netdev->flags);
+
+ if (netdev->flags & IFF_PROMISC)
+ nic->flags |= promiscuous;
+ else
+ nic->flags &= ~promiscuous;
+
+ if (netdev->flags & IFF_ALLMULTI ||
+ netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
+ nic->flags |= multicast_all;
+ else
+ nic->flags &= ~multicast_all;
+
+ e100_exec_cb(nic, NULL, e100_configure);
+ e100_exec_cb(nic, NULL, e100_multi);
+}
+
+static void e100_update_stats(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
+ struct stats *s = &nic->mem->stats;
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
+ &s->complete;
+
+ /* Device's stats reporting may take several microseconds to
+ * complete, so we're always waiting for results of the
+ * previous command. */
+
+ if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
+ *complete = 0;
+ nic->tx_frames = le32_to_cpu(s->tx_good_frames);
+ nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
+ ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
+ ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
+ ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
+ ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
+ ns->collisions += nic->tx_collisions;
+ ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
+ le32_to_cpu(s->tx_lost_crs);
+ ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+ nic->rx_over_length_errors;
+ ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
+ ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
+ ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
+ ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
+ le32_to_cpu(s->rx_alignment_errors) +
+ le32_to_cpu(s->rx_short_frame_errors) +
+ le32_to_cpu(s->rx_cdt_errors);
+ nic->tx_deferred += le32_to_cpu(s->tx_deferred);
+ nic->tx_single_collisions +=
+ le32_to_cpu(s->tx_single_collisions);
+ nic->tx_multiple_collisions +=
+ le32_to_cpu(s->tx_multiple_collisions);
+ if (nic->mac >= mac_82558_D101_A4) {
+ nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
+ nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
+ nic->rx_fc_unsupported +=
+ le32_to_cpu(s->fc_rcv_unsupported);
+ if (nic->mac >= mac_82559_D101M) {
+ nic->tx_tco_frames +=
+ le16_to_cpu(s->xmt_tco_frames);
+ nic->rx_tco_frames +=
+ le16_to_cpu(s->rcv_tco_frames);
+ }
+ }
+ }
+
+
+ if (e100_exec_cmd(nic, cuc_dump_reset, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
+}
+
+static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
+{
+ /* Adjust inter-frame-spacing (IFS) between two transmits if
+ * we're getting collisions on a half-duplex connection. */
+
+ if (duplex == DUPLEX_HALF) {
+ u32 prev = nic->adaptive_ifs;
+ u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
+
+ if ((nic->tx_frames / 32 < nic->tx_collisions) &&
+ (nic->tx_frames > min_frames)) {
+ if (nic->adaptive_ifs < 60)
+ nic->adaptive_ifs += 5;
+ } else if (nic->tx_frames < min_frames) {
+ if (nic->adaptive_ifs >= 5)
+ nic->adaptive_ifs -= 5;
+ }
+ if (nic->adaptive_ifs != prev)
+ e100_exec_cb(nic, NULL, e100_configure);
+ }
+}
+
+static void e100_watchdog(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ struct ethtool_cmd cmd;
+
+ DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
+
+ /* mii library handles link maintenance tasks */
+
+ mii_ethtool_gset(&nic->mii, &cmd);
+
+ if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n",
+ nic->netdev->name,
+ cmd.speed == SPEED_100 ? "100" : "10",
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
+ } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Down\n",
+ nic->netdev->name);
+ }
+
+ mii_check_link(&nic->mii);
+
+ /* Software generated interrupt to recover from (rare) Rx
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
+ spin_lock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
+
+ e100_update_stats(nic);
+ e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+
+ if (nic->mac <= mac_82557_D100_C)
+ /* Issue a multicast command to workaround a 557 lock up */
+ e100_set_multicast_list(nic->netdev);
+
+ if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
+ nic->flags |= ich_10h_workaround;
+ else
+ nic->flags &= ~ich_10h_workaround;
+
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
+}
+
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if ((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
+ cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
+ cb->u.tcb.tcb_byte_count = 0;
+ cb->u.tcb.threshold = nic->tx_threshold;
+ cb->u.tcb.tbd_count = 1;
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+ /* check for mapping failure? */
+ cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
+}
+
+static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ if (nic->flags & ich_10h_workaround) {
+ /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
+ Issue a NOP command followed by a 1us delay before
+ issuing the Tx command. */
+ if (e100_exec_cmd(nic, cuc_nop, 0))
+ DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
+ udelay(1);
+ }
+
+ err = e100_exec_cb(nic, skb, e100_xmit_prepare);
+
+ switch (err) {
+ case -ENOSPC:
+ /* We queued the skb, but now we're out of space. */
+ DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
+ netif_stop_queue(netdev);
+ break;
+ case -ENOMEM:
+ /* This is a hard error - log it. */
+ DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
+ netif_stop_queue(netdev);
+ return NETDEV_TX_BUSY;
+ }
+
+ netdev->trans_start = jiffies;
+ return NETDEV_TX_OK;
+}
+
+static int e100_tx_clean(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct cb *cb;
+ int tx_cleaned = 0;
+
+ spin_lock(&nic->cb_lock);
+
+ /* Clean CBs marked complete */
+ for (cb = nic->cb_to_clean;
+ cb->status & cpu_to_le16(cb_complete);
+ cb = nic->cb_to_clean = cb->next) {
+ DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if (likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
+
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(cb->skb);
+ cb->skb = NULL;
+ tx_cleaned = 1;
+ }
+ cb->status = 0;
+ nic->cbs_avail++;
+ }
+
+ spin_unlock(&nic->cb_lock);
+
+ /* Recover from running out of Tx resources in xmit_frame */
+ if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ netif_wake_queue(nic->netdev);
+
+ return tx_cleaned;
+}
+
+static void e100_clean_cbs(struct nic *nic)
+{
+ if (nic->cbs) {
+ while (nic->cbs_avail != nic->params.cbs.count) {
+ struct cb *cb = nic->cb_to_clean;
+ if (cb->skb) {
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(cb->skb);
+ }
+ nic->cb_to_clean = nic->cb_to_clean->next;
+ nic->cbs_avail++;
+ }
+ pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
+ nic->cbs = NULL;
+ nic->cbs_avail = 0;
+ }
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
+ nic->cbs;
+}
+
+static int e100_alloc_cbs(struct nic *nic)
+{
+ struct cb *cb;
+ unsigned int i, count = nic->params.cbs.count;
+
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
+ nic->cbs_avail = 0;
+
+ nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+ &nic->cbs_dma_addr);
+ if (!nic->cbs)
+ return -ENOMEM;
+ memset(nic->cbs, 0, count * sizeof(struct cb));
+
+ for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
+ cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
+
+ cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
+ cb->link = cpu_to_le32(nic->cbs_dma_addr +
+ ((i+1) % count) * sizeof(struct cb));
+ }
+
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
+ nic->cbs_avail = count;
+
+ return 0;
+}
+
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
+{
+ if (!nic->rxs) return;
+ if (RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if (!rx) rx = nic->rxs;
+
+ /* (Re)start RU if suspended or idle and RFA is non-NULL */
+ if (rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
+ }
+}
+
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+{
+ if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
+ return -ENOMEM;
+
+ /* Init, and map the RFD. */
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = NULL;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ }
+
+ return 0;
+}
+
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
+ unsigned int *work_done, unsigned int work_to_do)
+{
+ struct net_device *dev = nic->netdev;
+ struct sk_buff *skb = rx->skb;
+ struct rfd *rfd = (struct rfd *)skb->data;
+ u16 rfd_status, actual_size;
+
+ if (unlikely(work_done && *work_done >= work_to_do))
+ return -EAGAIN;
+
+ /* Need to sync before taking a peek at cb_complete bit */
+ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ rfd_status = le16_to_cpu(rfd->status);
+
+ DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
+
+ /* If data isn't ready, nothing to indicate */
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_FROMDEVICE);
+ return -ENODATA;
+ }
+
+ /* Get actual data size */
+ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
+ if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+
+ /* Get data */
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ }
+
+ /* Pull off the RFD and put the actual data (minus eth hdr) */
+ skb_reserve(skb, sizeof(struct rfd));
+ skb_put(skb, actual_size);
+ skb->protocol = eth_type_trans(skb, nic->netdev);
+
+ if (unlikely(!(rfd_status & cb_ok))) {
+ /* Don't indicate if hardware indicates errors */
+ dev_kfree_skb_any(skb);
+ } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+ /* Don't indicate oversized frames */
+ nic->rx_over_length_errors++;
+ dev_kfree_skb_any(skb);
+ } else {
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
+ netif_receive_skb(skb);
+ if (work_done)
+ (*work_done)++;
+ }
+
+ rx->skb = NULL;
+
+ return 0;
+}
+
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+ unsigned int work_to_do)
+{
+ struct rx *rx;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
+
+ /* Indicate newly arrived packets */
+ for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
+ break;
+ }
+
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
+
+ /* Alloc new skbs to refill list */
+ for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if (unlikely(e100_rx_alloc_skb(nic, rx)))
+ break; /* Better luck next time (see watchdog) */
+ }
+
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+
+ if (restart_required) {
+ // ack the rnr?
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if (work_done)
+ (*work_done)++;
+ }
+}
+
+static void e100_rx_clean_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (nic->rxs) {
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if (rx->skb) {
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ dev_kfree_skb(rx->skb);
+ }
+ }
+ kfree(nic->rxs);
+ nic->rxs = NULL;
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+}
+
+static int e100_rx_alloc_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
+ return -ENOMEM;
+
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
+ rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
+ if (e100_rx_alloc_skb(nic, rx)) {
+ e100_rx_clean_list(nic);
+ return -ENOMEM;
+ }
+ }
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+
+ nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
+
+ return 0;
+}
+
+static irqreturn_t e100_intr(int irq, void *dev_id)
+{
+ struct net_device *netdev = dev_id;
+ struct nic *nic = netdev_priv(netdev);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
+
+ DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
+
+ if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ stat_ack == stat_ack_not_present) /* Hardware is ejected */
+ return IRQ_NONE;
+
+ /* Ack interrupt(s) */
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
+
+ /* We hit Receive No Resource (RNR); restart RU after cleaning */
+ if (stat_ack & stat_ack_rnr)
+ nic->ru_running = RU_SUSPENDED;
+
+ if (likely(napi_schedule_prep(&nic->napi))) {
+ e100_disable_irq(nic);
+ __napi_schedule(&nic->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int e100_poll(struct napi_struct *napi, int budget)
+{
+ struct nic *nic = container_of(napi, struct nic, napi);
+ unsigned int work_done = 0;
+
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ e100_enable_irq(nic);
+ }
+
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_disable_irq(nic);
+ e100_intr(nic->pdev->irq, netdev);
+ e100_tx_clean(nic);
+ e100_enable_irq(nic);
+}
+#endif
+
+static int e100_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ e100_exec_cb(nic, NULL, e100_setup_iaaddr);
+
+ return 0;
+}
+
+static int e100_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+static int e100_asf(struct nic *nic)
+{
+ /* ASF can be enabled from eeprom */
+ return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
+ (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
+ !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
+ ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
+}
+
+static int e100_up(struct nic *nic)
+{
+ int err;
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_rx_clean_list;
+ if ((err = e100_hw_init(nic)))
+ goto err_clean_cbs;
+ e100_set_multicast_list(nic->netdev);
+ e100_start_receiver(nic, NULL);
+ mod_timer(&nic->watchdog, jiffies);
+ if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
+ nic->netdev->name, nic->netdev)))
+ goto err_no_irq;
+ netif_wake_queue(nic->netdev);
+ napi_enable(&nic->napi);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
+ return 0;
+
+err_no_irq:
+ del_timer_sync(&nic->watchdog);
+err_clean_cbs:
+ e100_clean_cbs(nic);
+err_rx_clean_list:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+static void e100_down(struct nic *nic)
+{
+ /* wait here for poll to complete */
+ napi_disable(&nic->napi);
+ netif_stop_queue(nic->netdev);
+ e100_hw_reset(nic);
+ free_irq(nic->pdev->irq, nic->netdev);
+ del_timer_sync(&nic->watchdog);
+ netif_carrier_off(nic->netdev);
+ e100_clean_cbs(nic);
+ e100_rx_clean_list(nic);
+}
+
+static void e100_tx_timeout(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct work_struct *work)
+{
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
+
+ DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
+ ioread8(&nic->csr->scb.status));
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+}
+
+static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
+{
+ int err;
+ struct sk_buff *skb;
+
+ /* Use driver resources to perform internal MAC or PHY
+ * loopback test. A single packet is prepared and transmitted
+ * in loopback mode, and the test passes if the received
+ * packet compares byte-for-byte to the transmitted packet. */
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_clean_rx;
+
+ /* ICH PHY loopback is broken so do MAC loopback instead */
+ if (nic->flags & ich && loopback_mode == lb_phy)
+ loopback_mode = lb_mac;
+
+ nic->loopback = loopback_mode;
+ if ((err = e100_hw_init(nic)))
+ goto err_loopback_none;
+
+ if (loopback_mode == lb_phy)
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
+ BMCR_LOOPBACK);
+
+ e100_start_receiver(nic, NULL);
+
+ if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
+ err = -ENOMEM;
+ goto err_loopback_none;
+ }
+ skb_put(skb, ETH_DATA_LEN);
+ memset(skb->data, 0xFF, ETH_DATA_LEN);
+ e100_xmit_frame(skb, nic->netdev);
+
+ msleep(10);
+
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ skb->data, ETH_DATA_LEN))
+ err = -EAGAIN;
+
+err_loopback_none:
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
+ nic->loopback = lb_none;
+ e100_clean_cbs(nic);
+ e100_hw_reset(nic);
+err_clean_rx:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+#define MII_LED_CONTROL 0x1B
+#define E100_82552_LED_OVERRIDE 0x19
+#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
+#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
+static void e100_blink_led(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
+ u16 led_reg = MII_LED_CONTROL;
+
+ if (nic->phy == phy_82552_v) {
+ led_reg = E100_82552_LED_OVERRIDE;
+
+ nic->leds = (nic->leds == E100_82552_LED_ON) ?
+ E100_82552_LED_OFF : E100_82552_LED_ON;
+ } else {
+ nic->leds = (nic->leds & led_on) ? led_off :
+ (nic->mac < mac_82559_D101M) ? led_on_557 :
+ led_on_559;
+ }
+ mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds);
+ mod_timer(&nic->blink_timer, jiffies + HZ / 4);
+}
+
+static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_ethtool_gset(&nic->mii, cmd);
+}
+
+static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
+ err = mii_ethtool_sset(&nic->mii, cmd);
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return err;
+}
+
+static void e100_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct nic *nic = netdev_priv(netdev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(nic->pdev));
+}
+
+#define E100_PHY_REGS 0x1C
+static int e100_get_regs_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+}
+
+static void e100_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u32 *buff = p;
+ int i;
+
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for (i = E100_PHY_REGS; i >= 0; i--)
+ buff[1 + E100_PHY_REGS - i] =
+ mdio_read(netdev, nic->mii.phy_id, i);
+ memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
+ e100_exec_cb(nic, NULL, e100_dump);
+ msleep(10);
+ memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
+ sizeof(nic->mem->dump_buf));
+}
+
+static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+ wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
+ wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
+}
+
+static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
+ return -EOPNOTSUPP;
+
+ if (wol->wolopts)
+ nic->flags |= wol_magic;
+ else
+ nic->flags &= ~wol_magic;
+
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return 0;
+}
+
+static u32 e100_get_msglevel(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->msg_enable;
+}
+
+static void e100_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct nic *nic = netdev_priv(netdev);
+ nic->msg_enable = value;
+}
+
+static int e100_nway_reset(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_nway_restart(&nic->mii);
+}
+
+static u32 e100_get_link(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_link_ok(&nic->mii);
+}
+
+static int e100_get_eeprom_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->eeprom_wc << 1;
+}
+
+#define E100_EEPROM_MAGIC 0x1234
+static int e100_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ eeprom->magic = E100_EEPROM_MAGIC;
+ memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+static int e100_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if (eeprom->magic != E100_EEPROM_MAGIC)
+ return -EINVAL;
+
+ memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
+
+ return e100_eeprom_save(nic, eeprom->offset >> 1,
+ (eeprom->len >> 1) + 1);
+}
+
+static void e100_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ ring->rx_max_pending = rfds->max;
+ ring->tx_max_pending = cbs->max;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rfds->count;
+ ring->tx_pending = cbs->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e100_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ rfds->count = max(ring->rx_pending, rfds->min);
+ rfds->count = min(rfds->count, rfds->max);
+ cbs->count = max(ring->tx_pending, cbs->min);
+ cbs->count = min(cbs->count, cbs->max);
+ DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+
+static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)",
+ "Eeprom test (on/offline)",
+ "Self test (offline)",
+ "Mac loopback (offline)",
+ "Phy loopback (offline)",
+};
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
+
+static void e100_diag_test(struct net_device *netdev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct ethtool_cmd cmd;
+ struct nic *nic = netdev_priv(netdev);
+ int i, err;
+
+ memset(data, 0, E100_TEST_LEN * sizeof(u64));
+ data[0] = !mii_link_ok(&nic->mii);
+ data[1] = e100_eeprom_load(nic);
+ if (test->flags & ETH_TEST_FL_OFFLINE) {
+
+ /* save speed, duplex & autoneg settings */
+ err = mii_ethtool_gset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ data[2] = e100_self_test(nic);
+ data[3] = e100_loopback_test(nic, lb_mac);
+ data[4] = e100_loopback_test(nic, lb_phy);
+
+ /* restore speed, duplex & autoneg settings */
+ err = mii_ethtool_sset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_up(nic);
+ }
+ for (i = 0; i < E100_TEST_LEN; i++)
+ test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
+}
+
+static int e100_phys_id(struct net_device *netdev, u32 data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
+ MII_LED_CONTROL;
+
+ if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ mod_timer(&nic->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&nic->blink_timer);
+ mdio_write(netdev, nic->mii.phy_id, led_reg, 0);
+
+ return 0;
+}
+
+static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
+ "tx_flow_control_pause", "rx_flow_control_pause",
+ "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+};
+#define E100_NET_STATS_LEN 21
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
+
+static int e100_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e100_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
+
+ data[i++] = nic->tx_deferred;
+ data[i++] = nic->tx_single_collisions;
+ data[i++] = nic->tx_multiple_collisions;
+ data[i++] = nic->tx_fc_pause;
+ data[i++] = nic->rx_fc_pause;
+ data[i++] = nic->rx_fc_unsupported;
+ data[i++] = nic->tx_tco_frames;
+ data[i++] = nic->rx_tco_frames;
+}
+
+static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
+ break;
+ }
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .get_regs_len = e100_get_regs_len,
+ .get_regs = e100_get_regs,
+ .get_wol = e100_get_wol,
+ .set_wol = e100_set_wol,
+ .get_msglevel = e100_get_msglevel,
+ .set_msglevel = e100_set_msglevel,
+ .nway_reset = e100_nway_reset,
+ .get_link = e100_get_link,
+ .get_eeprom_len = e100_get_eeprom_len,
+ .get_eeprom = e100_get_eeprom,
+ .set_eeprom = e100_set_eeprom,
+ .get_ringparam = e100_get_ringparam,
+ .set_ringparam = e100_set_ringparam,
+ .self_test = e100_diag_test,
+ .get_strings = e100_get_strings,
+ .phys_id = e100_phys_id,
+ .get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
+};
+
+static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
+}
+
+static int e100_alloc(struct nic *nic)
+{
+ nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
+ &nic->dma_addr);
+ return nic->mem ? 0 : -ENOMEM;
+}
+
+static void e100_free(struct nic *nic)
+{
+ if (nic->mem) {
+ pci_free_consistent(nic->pdev, sizeof(struct mem),
+ nic->mem, nic->dma_addr);
+ nic->mem = NULL;
+ }
+}
+
+static int e100_open(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err = 0;
+
+ netif_carrier_off(netdev);
+ if ((err = e100_up(nic)))
+ DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
+ return err;
+}
+
+static int e100_close(struct net_device *netdev)
+{
+ e100_down(netdev_priv(netdev));
+ return 0;
+}
+
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_xmit_frame,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = e100_set_multicast_list,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_change_mtu = e100_change_mtu,
+ .ndo_do_ioctl = e100_do_ioctl,
+ .ndo_tx_timeout = e100_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
+static int __devinit e100_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct nic *nic;
+ int err;
+
+ if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if (((1 << debug) - 1) & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
+ return -ENOMEM;
+ }
+
+ netdev->netdev_ops = &e100_netdev_ops;
+ SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
+ netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
+ nic->netdev = netdev;
+ nic->pdev = pdev;
+ nic->msg_enable = (1 << debug) - 1;
+ nic->mdio_ctrl = mdio_ctrl_hw;
+ pci_set_drvdata(pdev, netdev);
+
+ if ((err = pci_enable_device(pdev))) {
+ DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_dev;
+ }
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
+ "base address, aborting.\n");
+ err = -ENODEV;
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_request_regions(pdev, DRV_NAME))) {
+ DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+ DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
+ goto err_out_free_res;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if (!nic->csr) {
+ DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+
+ if (ent->driver_data)
+ nic->flags |= ich;
+ else
+ nic->flags &= ~ich;
+
+ e100_get_defaults(nic);
+
+ /* locks must be initialized before calling hw_reset */
+ spin_lock_init(&nic->cb_lock);
+ spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
+
+ /* Reset the device before pci_set_master() in case device is in some
+ * funky state and has an interrupt pending - hint: we don't have the
+ * interrupt handler registered yet. */
+ e100_hw_reset(nic);
+
+ pci_set_master(pdev);
+
+ init_timer(&nic->watchdog);
+ nic->watchdog.function = e100_watchdog;
+ nic->watchdog.data = (unsigned long)nic;
+ init_timer(&nic->blink_timer);
+ nic->blink_timer.function = e100_blink_led;
+ nic->blink_timer.data = (unsigned long)nic;
+
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
+
+ if ((err = e100_alloc(nic))) {
+ DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
+ goto err_out_iounmap;
+ }
+
+ if ((err = e100_eeprom_load(nic)))
+ goto err_out_free;
+
+ e100_phy_init(nic);
+
+ memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from "
+ "EEPROM, aborting.\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
+ "you MUST configure one.\n");
+ }
+ }
+
+ /* Wol magic packet can be enabled from eeprom */
+ if ((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
+
+ /* ack any pending wake events, disable PME */
+ pci_pme_active(pdev, false);
+
+ strcpy(netdev->name, "eth%d");
+ if ((err = register_netdev(netdev))) {
+ DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
+ goto err_out_free;
+ }
+ nic->cbs_pool = pci_pool_create(netdev->name,
+ nic->pdev,
+ nic->params.cbs.max * sizeof(struct cb),
+ sizeof(u32),
+ 0);
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, netdev->dev_addr);
+
+ return 0;
+
+err_out_free:
+ e100_free(nic);
+err_out_iounmap:
+ pci_iounmap(pdev, nic->csr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+static void __devexit e100_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if (netdev) {
+ struct nic *nic = netdev_priv(netdev);
+ unregister_netdev(netdev);
+ e100_free(nic);
+ pci_iounmap(pdev, nic->csr);
+ pci_pool_destroy(nic->cbs_pool);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
+#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
+#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
+static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ netif_device_detach(netdev);
+
+ pci_save_state(pdev);
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ /* enable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED, smartspeed |
+ E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
+ }
+ *enable_wake = true;
+ } else {
+ *enable_wake = false;
+ }
+
+ pci_disable_device(pdev);
+}
+
+static int __e100_power_off(struct pci_dev *pdev, bool wake)
+{
+ if (wake)
+ return pci_prepare_to_sleep(pdev);
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ return __e100_power_off(pdev, wake);
+}
+
+static int e100_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ /* disable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED,
+ smartspeed & ~(E100_82552_REV_ANEG));
+ }
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e100_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ if (system_state == SYSTEM_POWER_OFF)
+ __e100_power_off(pdev, wake);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev)) {
+ e100_open(netdev);
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
+
+static struct pci_driver e100_driver = {
+ .name = DRV_NAME,
+ .id_table = e100_id_table,
+ .probe = e100_probe,
+ .remove = __devexit_p(e100_remove),
+#ifdef CONFIG_PM
+ /* Power Management hooks */
+ .suspend = e100_suspend,
+ .resume = e100_resume,
+#endif
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
+};
+
+static int __init e100_init_module(void)
+{
+ if (((1 << debug) - 1) & NETIF_MSG_DRV) {
+ printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
+ }
+ return pci_register_driver(&e100_driver);
+}
+
+static void __exit e100_cleanup_module(void)
+{
+ pci_unregister_driver(&e100_driver);
+}
+
+module_init(e100_init_module);
+module_exit(e100_cleanup_module);
--- a/devices/e1000/Makefile.am Fri May 13 15:33:16 2011 +0200
+++ b/devices/e1000/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -46,6 +46,8 @@
e1000-2.6.27-orig.h \
e1000-2.6.28-ethercat.h \
e1000-2.6.28-orig.h \
+ e1000-2.6.33-ethercat.h \
+ e1000-2.6.33-orig.h \
e1000_ethtool-2.6.13-ethercat.c \
e1000_ethtool-2.6.13-orig.c \
e1000_ethtool-2.6.18-ethercat.c \
@@ -62,6 +64,8 @@
e1000_ethtool-2.6.27-orig.c \
e1000_ethtool-2.6.28-ethercat.c \
e1000_ethtool-2.6.28-orig.c \
+ e1000_ethtool-2.6.33-ethercat.c \
+ e1000_ethtool-2.6.33-orig.c \
e1000_hw-2.6.13-ethercat.c \
e1000_hw-2.6.13-ethercat.h \
e1000_hw-2.6.13-orig.c \
@@ -94,6 +98,10 @@
e1000_hw-2.6.28-ethercat.h \
e1000_hw-2.6.28-orig.c \
e1000_hw-2.6.28-orig.h \
+ e1000_hw-2.6.33-ethercat.c \
+ e1000_hw-2.6.33-ethercat.h \
+ e1000_hw-2.6.33-orig.c \
+ e1000_hw-2.6.33-orig.h \
e1000_main-2.6.13-ethercat.c \
e1000_main-2.6.13-orig.c \
e1000_main-2.6.18-ethercat.c \
@@ -110,6 +118,8 @@
e1000_main-2.6.27-orig.c \
e1000_main-2.6.28-ethercat.c \
e1000_main-2.6.28-orig.c \
+ e1000_main-2.6.33-ethercat.c \
+ e1000_main-2.6.33-orig.c \
e1000_osdep-2.6.13-ethercat.h \
e1000_osdep-2.6.13-orig.h \
e1000_osdep-2.6.18-ethercat.h \
@@ -126,6 +136,8 @@
e1000_osdep-2.6.27-orig.h \
e1000_osdep-2.6.28-ethercat.h \
e1000_osdep-2.6.28-orig.h \
+ e1000_osdep-2.6.33-ethercat.h \
+ e1000_osdep-2.6.33-orig.h \
e1000_param-2.6.13-ethercat.c \
e1000_param-2.6.13-orig.c \
e1000_param-2.6.18-ethercat.c \
@@ -142,6 +154,8 @@
e1000_param-2.6.27-orig.c \
e1000_param-2.6.28-ethercat.c \
e1000_param-2.6.28-orig.c
+ e1000_param-2.6.33-ethercat.c \
+ e1000_param-2.6.33-orig.c
BUILT_SOURCES = \
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000-2.6.31-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,357 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include "../ecdev.h"
+
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+
+struct e1000_adapter;
+
+#include "e1000_hw-2.6.31-ethercat.h"
+
+#ifdef DBG
+#define E1000_DBG(args...) printk(KERN_DEBUG "ec_e1000: " args)
+#else
+#define E1000_DBG(args...)
+#endif
+
+#define E1000_ERR(args...) printk(KERN_ERR "ec_e1000: " args)
+
+#define PFX "ec_e1000: "
+
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+do { \
+ if (NETIF_MSG_##nlevel & adapter->msg_enable) \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, \
+ adapter->netdev->name, __func__, ##args); \
+} while (0)
+
+#define E1000_MAX_INTR 10
+
+/* TX/RX descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 256
+#define E1000_MIN_TXD 80
+#define E1000_MAX_82544_TXD 4096
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 256
+#define E1000_MIN_RXD 80
+#define E1000_MAX_82544_RXD 4096
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
+#define E1000_RXBUFFER_512 512
+#define E1000_RXBUFFER_1024 1024
+#define E1000_RXBUFFER_2048 2048
+#define E1000_RXBUFFER_4096 4096
+#define E1000_RXBUFFER_8192 8192
+#define E1000_RXBUFFER_16384 16384
+
+/* SmartSpeed delimiters */
+#define E1000_SMARTSPEED_DOWNSHIFT 3
+#define E1000_SMARTSPEED_MAX 15
+
+/* Packet Buffer allocations */
+#define E1000_PBA_BYTES_SHIFT 0xA
+#define E1000_TX_HEAD_ADDR_SHIFT 7
+#define E1000_PBA_TX_MASK 0xFFFF0000
+
+/* Flow Control Watermarks */
+#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
+
+#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define E1000_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_ICH8_APME 0x0004
+#define E1000_EEPROM_APME 0x0400
+
+#ifndef E1000_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define E1000_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct e1000_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+};
+
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
+};
+
+struct e1000_rx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ /* cpu for rx queue */
+ int cpu;
+
+ u16 rdh;
+ u16 rdt;
+};
+
+#define E1000_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) \
+ ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+/* board specific private data structure */
+
+struct e1000_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct vlan_group *vlgrp;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ u8 fc_autoneg;
+
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ unsigned long tx_queue_len;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ bool pcix_82544;
+ bool detect_tx_hung;
+
+ /* RX */
+ bool (*clean_rx)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+ void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
+
+ int msg_enable;
+ bool have_msi;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
+ unsigned long flags;
+ u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
+
+ ec_device_t *ecdev;
+ unsigned long ec_watchdog_jiffies;
+};
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+#endif /* _E1000_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000-2.6.31-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,352 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+
+struct e1000_adapter;
+
+#include "e1000_hw.h"
+
+#ifdef DBG
+#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
+#else
+#define E1000_DBG(args...)
+#endif
+
+#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
+
+#define PFX "e1000: "
+
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+do { \
+ if (NETIF_MSG_##nlevel & adapter->msg_enable) \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, \
+ adapter->netdev->name, __func__, ##args); \
+} while (0)
+
+#define E1000_MAX_INTR 10
+
+/* TX/RX descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 256
+#define E1000_MIN_TXD 80
+#define E1000_MAX_82544_TXD 4096
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 256
+#define E1000_MIN_RXD 80
+#define E1000_MAX_82544_RXD 4096
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
+#define E1000_RXBUFFER_512 512
+#define E1000_RXBUFFER_1024 1024
+#define E1000_RXBUFFER_2048 2048
+#define E1000_RXBUFFER_4096 4096
+#define E1000_RXBUFFER_8192 8192
+#define E1000_RXBUFFER_16384 16384
+
+/* SmartSpeed delimiters */
+#define E1000_SMARTSPEED_DOWNSHIFT 3
+#define E1000_SMARTSPEED_MAX 15
+
+/* Packet Buffer allocations */
+#define E1000_PBA_BYTES_SHIFT 0xA
+#define E1000_TX_HEAD_ADDR_SHIFT 7
+#define E1000_PBA_TX_MASK 0xFFFF0000
+
+/* Flow Control Watermarks */
+#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
+
+#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define E1000_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_ICH8_APME 0x0004
+#define E1000_EEPROM_APME 0x0400
+
+#ifndef E1000_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define E1000_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct e1000_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+};
+
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
+};
+
+struct e1000_rx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ /* cpu for rx queue */
+ int cpu;
+
+ u16 rdh;
+ u16 rdt;
+};
+
+#define E1000_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) \
+ ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+/* board specific private data structure */
+
+struct e1000_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct vlan_group *vlgrp;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ u8 fc_autoneg;
+
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ unsigned long tx_queue_len;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ bool pcix_82544;
+ bool detect_tx_hung;
+
+ /* RX */
+ bool (*clean_rx)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+ void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
+
+ int msg_enable;
+ bool have_msi;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
+ unsigned long flags;
+ u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
+};
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+#endif /* _E1000_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000-2.6.33-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,361 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include "../ecdev.h"
+
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+
+struct e1000_adapter;
+
+#include "e1000_hw-2.6.33-ethercat.h"
+
+#ifdef DBG
+#define E1000_DBG(args...) printk(KERN_DEBUG "ec_e1000: " args)
+#else
+#define E1000_DBG(args...)
+#endif
+
+#define E1000_ERR(args...) printk(KERN_ERR "ec_e1000: " args)
+
+#define PFX "ec_e1000: "
+
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+do { \
+ if (NETIF_MSG_##nlevel & adapter->msg_enable) \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, \
+ adapter->netdev->name, __func__, ##args); \
+} while (0)
+
+#define E1000_MAX_INTR 10
+
+/* TX/RX descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 256
+#define E1000_MIN_TXD 80
+#define E1000_MAX_82544_TXD 4096
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 256
+#define E1000_MIN_RXD 80
+#define E1000_MAX_82544_RXD 4096
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
+#define E1000_RXBUFFER_512 512
+#define E1000_RXBUFFER_1024 1024
+#define E1000_RXBUFFER_2048 2048
+#define E1000_RXBUFFER_4096 4096
+#define E1000_RXBUFFER_8192 8192
+#define E1000_RXBUFFER_16384 16384
+
+/* SmartSpeed delimiters */
+#define E1000_SMARTSPEED_DOWNSHIFT 3
+#define E1000_SMARTSPEED_MAX 15
+
+/* Packet Buffer allocations */
+#define E1000_PBA_BYTES_SHIFT 0xA
+#define E1000_TX_HEAD_ADDR_SHIFT 7
+#define E1000_PBA_TX_MASK 0xFFFF0000
+
+/* Flow Control Watermarks */
+#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
+
+#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define E1000_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_APME 0x0400
+
+#ifndef E1000_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define E1000_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct e1000_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
+};
+
+struct e1000_rx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *rx_skb_top;
+
+ /* cpu for rx queue */
+ int cpu;
+
+ u16 rdh;
+ u16 rdt;
+};
+
+#define E1000_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) \
+ ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+/* board specific private data structure */
+
+struct e1000_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct vlan_group *vlgrp;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ u8 fc_autoneg;
+
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ unsigned long tx_queue_len;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ bool pcix_82544;
+ bool detect_tx_hung;
+
+ /* RX */
+ bool (*clean_rx)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+ void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
+
+ int msg_enable;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
+ unsigned long flags;
+ u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
+
+ bool discarding;
+
+ ec_device_t *ecdev;
+ unsigned long ec_watchdog_jiffies;
+};
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+#endif /* _E1000_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000-2.6.33-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,356 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+
+struct e1000_adapter;
+
+#include "e1000_hw.h"
+
+#ifdef DBG
+#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
+#else
+#define E1000_DBG(args...)
+#endif
+
+#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
+
+#define PFX "e1000: "
+
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+do { \
+ if (NETIF_MSG_##nlevel & adapter->msg_enable) \
+ printk(KERN_##klevel PFX "%s: %s: " fmt, \
+ adapter->netdev->name, __func__, ##args); \
+} while (0)
+
+#define E1000_MAX_INTR 10
+
+/* TX/RX descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 256
+#define E1000_MIN_TXD 80
+#define E1000_MAX_82544_TXD 4096
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 256
+#define E1000_MIN_RXD 80
+#define E1000_MAX_82544_RXD 4096
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
+#define E1000_RXBUFFER_512 512
+#define E1000_RXBUFFER_1024 1024
+#define E1000_RXBUFFER_2048 2048
+#define E1000_RXBUFFER_4096 4096
+#define E1000_RXBUFFER_8192 8192
+#define E1000_RXBUFFER_16384 16384
+
+/* SmartSpeed delimiters */
+#define E1000_SMARTSPEED_DOWNSHIFT 3
+#define E1000_SMARTSPEED_MAX 15
+
+/* Packet Buffer allocations */
+#define E1000_PBA_BYTES_SHIFT 0xA
+#define E1000_TX_HEAD_ADDR_SHIFT 7
+#define E1000_PBA_TX_MASK 0xFFFF0000
+
+/* Flow Control Watermarks */
+#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
+
+#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define E1000_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_APME 0x0400
+
+#ifndef E1000_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define E1000_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct e1000_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
+};
+
+struct e1000_rx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *rx_skb_top;
+
+ /* cpu for rx queue */
+ int cpu;
+
+ u16 rdh;
+ u16 rdt;
+};
+
+#define E1000_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) \
+ ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+/* board specific private data structure */
+
+struct e1000_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct vlan_group *vlgrp;
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ u8 fc_autoneg;
+
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ unsigned long tx_queue_len;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ bool pcix_82544;
+ bool detect_tx_hung;
+
+ /* RX */
+ bool (*clean_rx)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+ void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
+
+ int msg_enable;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
+ unsigned long flags;
+ u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
+
+ bool discarding;
+};
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+#endif /* _E1000_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_ethtool-2.6.31-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,2009 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include "e1000-2.6.31-ethercat.h"
+#include <asm/uaccess.h>
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
+ offsetof(struct e1000_adapter, m)
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ { "rx_packets", E1000_STAT(stats.gprc) },
+ { "tx_packets", E1000_STAT(stats.gptc) },
+ { "rx_bytes", E1000_STAT(stats.gorcl) },
+ { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_broadcast", E1000_STAT(stats.bprc) },
+ { "tx_broadcast", E1000_STAT(stats.bptc) },
+ { "rx_multicast", E1000_STAT(stats.mprc) },
+ { "tx_multicast", E1000_STAT(stats.mptc) },
+ { "rx_errors", E1000_STAT(stats.rxerrc) },
+ { "tx_errors", E1000_STAT(stats.txerrc) },
+ { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+ { "multicast", E1000_STAT(stats.mprc) },
+ { "collisions", E1000_STAT(stats.colc) },
+ { "rx_length_errors", E1000_STAT(stats.rlerrc) },
+ { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
+ { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
+ { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+ { "tx_window_errors", E1000_STAT(stats.latecol) },
+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+ { "tx_restart_queue", E1000_STAT(restart_queue) },
+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "rx_header_split", E1000_STAT(rx_hdr_split) },
+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
+};
+
+#define E1000_QUEUE_STATS_LEN 0
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ if (hw->phy_type == e1000_phy_ife)
+ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+
+ if (hw->mac_type == e1000_82543)
+ ecmd->transceiver = XCVR_EXTERNAL;
+ else
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+
+ if (hw->mac_type >= e1000_82545)
+ ecmd->transceiver = XCVR_INTERNAL;
+ else
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ if (er32(STATUS) & E1000_STATUS_LU) {
+
+ e1000_get_speed_and_duplex(hw, &adapter->link_speed,
+ &adapter->link_duplex);
+ ecmd->speed = adapter->link_speed;
+
+ /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed */
+ if (e1000_check_phy_reset_block(hw)) {
+ DPRINTK(DRV, ERR, "Cannot change link characteristics "
+ "when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->autoneg = 1;
+ if (hw->media_type == e1000_media_type_fiber)
+ hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->autoneg_advertised;
+ } else
+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc == E1000_FC_RX_PAUSE)
+ pause->rx_pause = 1;
+ else if (hw->fc == E1000_FC_TX_PAUSE)
+ pause->tx_pause = 1;
+ else if (hw->fc == E1000_FC_FULL) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_FULL;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_RX_PAUSE;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_NONE;
+
+ hw->original_fc = hw->fc;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+ } else
+ retval = ((hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return retval;
+}
+
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->rx_csum;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ adapter->rx_csum = data;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82543) {
+ if (!data)
+ return -EINVAL;
+ return 0;
+ }
+
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((hw->mac_type < e1000_82544) ||
+ (hw->mac_type == e1000_82547))
+ return data ? -EINVAL : 0;
+
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+
+ if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
+ netdev->features |= NETIF_F_TSO6;
+ else
+ netdev->features &= ~NETIF_F_TSO6;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = true;
+ return 0;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
+ if (hw->phy_type == e1000_phy_igp) {
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_A);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_B);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[14] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_C);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[15] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_D);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[16] = (u32)phy_data; /* cable length */
+ regs_buff[17] = 0; /* extended 10bt distance (not needed) */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_PCS_INIT_REG);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
+ regs_buff[20] = 0; /* polarity correction enabled (always) */
+ regs_buff[22] = 0; /* phy receive errors (unavailable) */
+ regs_buff[23] = regs_buff[18]; /* mdix mode */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ } else {
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ if (hw->mac_type >= e1000_82540 &&
+ hw->mac_type < e1000_82571 &&
+ hw->media_type == e1000_media_type_copper) {
+ regs_buff[26] = er32(MANC);
+ }
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ return hw->eeprom.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->eeprom.type == e1000_eeprom_spi)
+ ret_val = e1000_read_eeprom(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->eeprom.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_eeprom(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 conrollers */
+ if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
+ (hw->mac_type == e1000_82573)))
+ e1000_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ char firmware_version[32];
+ u16 eeprom_data;
+
+ strncpy(drvinfo->driver, e1000_driver_name, 32);
+ strncpy(drvinfo->version, e1000_driver_version, 32);
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 8257{1|2|3} controllers */
+ e1000_read_eeprom(hw, 5, 1, &eeprom_data);
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+ break;
+ default:
+ sprintf(firmware_version, "N/A");
+ }
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
+
+ ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD;
+ ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
+ E1000_MAX_82544_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr, *tx_old;
+ struct e1000_rx_ring *rxdr, *rx_old;
+ int i, err;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!txdr)
+ goto err_alloc_tx;
+
+ rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!rxdr)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = txdr;
+ adapter->rx_ring = rxdr;
+
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_RXD : E1000_MAX_82544_RXD));
+ rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rxdr[i].count = rxdr->count;
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rxdr;
+ adapter->tx_ring = txdr;
+ err = e1000_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+err_setup_tx:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rxdr);
+err_alloc_rx:
+ kfree(txdr);
+err_alloc_tx:
+ e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static const u32 test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test); i++) {
+ writel(write & test[i], address);
+ read = readl(address);
+ if (read != (write & test[i] & mask)) {
+ DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
+ *data = reg;
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+
+ writel(write & mask, address);
+ read = readl(address);
+ if ((read & mask) != (write & mask)) {
+ DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u32 value, before, after;
+ u32 i, toggle;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+ switch (hw->mac_type) {
+ /* there are several bits on newer hardware that are r/w */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ toggle = 0x7FFFF3FF;
+ break;
+ case e1000_82573:
+ case e1000_ich8lan:
+ toggle = 0x7FFFF033;
+ break;
+ default:
+ toggle = 0xFFFFF833;
+ break;
+ }
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ DPRINTK(DRV, ERR, "failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+ }
+
+ REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = (hw->mac_type == e1000_ich8lan ?
+ 0x06C3B33E : 0x06DFB3FE);
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
+
+ if (hw->mac_type >= e1000_82543) {
+
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ if (hw->mac_type != e1000_ich8lan)
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+ value = (hw->mac_type == e1000_ich8lan ?
+ E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+ for (i = 0; i < value; i++) {
+ REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
+ 0xFFFFFFFF);
+ }
+
+ } else {
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
+
+ }
+
+ value = (hw->mac_type == e1000_ich8lan ?
+ E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+ for (i = 0; i < value; i++)
+ REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16)EEPROM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *)data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI interrupts here, yet */
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev))
+ shared_int = false;
+ else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ DPRINTK(HW, INFO, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+
+ if (hw->mac_type == e1000_ich8lan && i == 8)
+ continue;
+
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, txdr->buffer_info[i].dma,
+ txdr->buffer_info[i].length,
+ PCI_DMA_TODEVICE);
+ if (txdr->buffer_info[i].skb)
+ dev_kfree_skb(txdr->buffer_info[i].skb);
+ }
+ }
+
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
+ rxdr->buffer_info[i].length,
+ PCI_DMA_FROMDEVICE);
+ if (rxdr->buffer_info[i].skb)
+ dev_kfree_skb(rxdr->buffer_info[i].skb);
+ }
+ }
+
+ if (txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
+ txdr->desc = NULL;
+ }
+ if (rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
+ rxdr->desc = NULL;
+ }
+
+ kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+ kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+
+ return;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
+
+ txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!txdr->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ memset(txdr->desc, 0, txdr->size);
+ txdr->next_to_use = txdr->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64)txdr->dma >> 32));
+ ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < txdr->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ txdr->buffer_info[i].skb = skb;
+ txdr->buffer_info[i].length = skb->len;
+ txdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RPS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
+
+ rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!rxdr->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ if (!rxdr->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+ rxdr->next_to_use = rxdr->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64)rxdr->dma >> 32));
+ ew32(RDLEN, rxdr->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rxdr->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rxdr->buffer_info[i].skb = skb;
+ rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
+ rxdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_write_phy_reg(hw, 29, 0x001F);
+ e1000_write_phy_reg(hw, 30, 0x8FFC);
+ e1000_write_phy_reg(hw, 29, 0x001A);
+ e1000_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg;
+
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This
+ * value defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_EPSCR_TX_CLK_25;
+ e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
+
+ /* In addition, because of the s/w reset above, we need to enable
+ * CRS on TX. This must be set for both full and half duplex
+ * operation.
+ */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, phy_reg);
+}
+
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg;
+ u16 phy_reg;
+
+ /* Setup the Device Control Register for PHY loopback test. */
+
+ ctrl_reg = er32(CTRL);
+ ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
+ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Read the PHY Specific Control Register (0x10) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+
+ /* Clear Auto-Crossover bits in PHY Specific Control Register
+ * (bits 6:5).
+ */
+ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+
+ /* Perform software reset on the PHY */
+ e1000_phy_reset(hw);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
+
+ /* Wait for reset to complete. */
+ udelay(500);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_phy_disable_receiver(adapter);
+
+ /* Set the loopback bit in the PHY control register. */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+
+ /* Setup TX_CLK and TX_CRS one more time. */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Check Phy Configuration */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg != 0x4100)
+ return 9;
+
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ if (phy_reg != 0x0070)
+ return 10;
+
+ e1000_read_phy_reg(hw, 29, &phy_reg);
+ if (phy_reg != 0x001A)
+ return 11;
+
+ return 0;
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->autoneg = false;
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
+ /* autoneg off */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+ } else if (hw->phy_type == e1000_phy_gg82563)
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x1CC);
+
+ ctrl_reg = er32(CTRL);
+
+ if (hw->phy_type == e1000_phy_ife) {
+ /* force 100, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ } else {
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ }
+
+ if (hw->media_type == e1000_media_type_copper &&
+ hw->phy_type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic is half
+ * duplex link is detected. */
+ stat_reg = er32(STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy_type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg = 0;
+ u16 count = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Attempt to setup Loopback mode on Non-integrated PHY.
+ * Some PHY registers get corrupted at random, so
+ * attempt this 10 times.
+ */
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
+ count++ < 10);
+ if (count < 11)
+ return 0;
+ }
+ break;
+
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ return e1000_integrated_phy_loopback(adapter);
+ break;
+
+ default:
+ /* Default PHY loopback work is to read the MII
+ * control register and assert bit 14 (loopback mode).
+ */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ return 0;
+ break;
+ }
+
+ return 8;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ return e1000_set_phy_loopback(adapter);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+#define E1000_SERDES_LB_ON 0x410
+ e1000_set_phy_loopback(adapter);
+ ew32(SCTL, E1000_SERDES_LB_ON);
+ msleep(10);
+ return 0;
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->media_type == e1000_media_type_copper)
+ return e1000_set_phy_loopback(adapter);
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+#define E1000_SERDES_LB_OFF 0x400
+ ew32(SCTL, E1000_SERDES_LB_OFF);
+ msleep(10);
+ break;
+ }
+ /* Fall Through */
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = true;
+ if (hw->phy_type == e1000_phy_gg82563)
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x180);
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
+
+ ew32(RDT, rxdr->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if (unlikely(++k == txdr->count)) k = 0;
+ }
+ ew32(TDT, k);
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if (!ret_val)
+ good_cnt++;
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active */
+ if (e1000_check_phy_reset_block(hw)) {
+ DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
+ "when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->serdes_link_down = true;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ e1000_check_for_link(hw);
+ if (!hw->serdes_link_down)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ e1000_check_for_link(hw);
+ if (hw->autoneg) /* if auto_neg is set wait for it */
+ msleep(4000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ *data = 1;
+ }
+ }
+ return *data;
+}
+
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ bool if_running;
+
+ if (adapter->ecdev)
+ return;
+
+ if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->flags);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ u16 autoneg_advertised = hw->autoneg_advertised;
+ u8 forced_speed_duplex = hw->forced_speed_duplex;
+ u8 autoneg = hw->autoneg;
+
+ DPRINTK(HW, INFO, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ e1000_reset(adapter);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ /* make sure the phy is powered up */
+ e1000_power_up_phy(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ hw->autoneg_advertised = autoneg_advertised;
+ hw->forced_speed_duplex = forced_speed_duplex;
+ hw->autoneg = autoneg;
+
+ e1000_reset(adapter);
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ DPRINTK(HW, INFO, "online testing starting\n");
+ /* Online tests */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ /* these don't support WoL at all */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_COPPER:
+ /* Wake events not supported on port B */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* quad port adapters only support WoL on port A */
+ if (!adapter->quad_port_a) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* KSP3 does not suppport UCAST wake-ups */
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+
+ return;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define E1000_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define E1000_LED_ON 0
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ e1000_led_off(hw);
+ else
+ e1000_led_on(hw);
+
+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
+static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data)
+ data = INT_MAX;
+
+ if (hw->mac_type < e1000_82571) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ e1000_setup_led(hw);
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ } else if (hw->phy_type == e1000_phy_ife) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ } else {
+ e1000_blink_led_start(hw);
+ msleep_interruptible(data * 1000);
+ }
+
+ e1000_led_off(hw);
+ clear_bit(E1000_LED_ON, &adapter->led_status);
+ e1000_cleanup_led(hw);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ e1000_update_stats(adapter);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+/* BUG_ON(i != E1000_STATS_LEN); */
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e1000_gstrings_test,
+ sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = e1000_set_tso,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .phys_id = e1000_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000_get_sset_count,
+};
+
+void e1000_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_ethtool-2.6.31-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,1987 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include "e1000.h"
+#include <asm/uaccess.h>
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
+ offsetof(struct e1000_adapter, m)
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ { "rx_packets", E1000_STAT(stats.gprc) },
+ { "tx_packets", E1000_STAT(stats.gptc) },
+ { "rx_bytes", E1000_STAT(stats.gorcl) },
+ { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_broadcast", E1000_STAT(stats.bprc) },
+ { "tx_broadcast", E1000_STAT(stats.bptc) },
+ { "rx_multicast", E1000_STAT(stats.mprc) },
+ { "tx_multicast", E1000_STAT(stats.mptc) },
+ { "rx_errors", E1000_STAT(stats.rxerrc) },
+ { "tx_errors", E1000_STAT(stats.txerrc) },
+ { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+ { "multicast", E1000_STAT(stats.mprc) },
+ { "collisions", E1000_STAT(stats.colc) },
+ { "rx_length_errors", E1000_STAT(stats.rlerrc) },
+ { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
+ { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
+ { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+ { "tx_window_errors", E1000_STAT(stats.latecol) },
+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+ { "tx_restart_queue", E1000_STAT(restart_queue) },
+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "rx_header_split", E1000_STAT(rx_hdr_split) },
+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
+};
+
+#define E1000_QUEUE_STATS_LEN 0
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ if (hw->phy_type == e1000_phy_ife)
+ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+
+ if (hw->mac_type == e1000_82543)
+ ecmd->transceiver = XCVR_EXTERNAL;
+ else
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+
+ if (hw->mac_type >= e1000_82545)
+ ecmd->transceiver = XCVR_INTERNAL;
+ else
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ if (er32(STATUS) & E1000_STATUS_LU) {
+
+ e1000_get_speed_and_duplex(hw, &adapter->link_speed,
+ &adapter->link_duplex);
+ ecmd->speed = adapter->link_speed;
+
+ /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed */
+ if (e1000_check_phy_reset_block(hw)) {
+ DPRINTK(DRV, ERR, "Cannot change link characteristics "
+ "when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->autoneg = 1;
+ if (hw->media_type == e1000_media_type_fiber)
+ hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->autoneg_advertised;
+ } else
+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc == E1000_FC_RX_PAUSE)
+ pause->rx_pause = 1;
+ else if (hw->fc == E1000_FC_TX_PAUSE)
+ pause->tx_pause = 1;
+ else if (hw->fc == E1000_FC_FULL) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_FULL;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_RX_PAUSE;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_NONE;
+
+ hw->original_fc = hw->fc;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+ } else
+ retval = ((hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return retval;
+}
+
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->rx_csum;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->rx_csum = data;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82543) {
+ if (!data)
+ return -EINVAL;
+ return 0;
+ }
+
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((hw->mac_type < e1000_82544) ||
+ (hw->mac_type == e1000_82547))
+ return data ? -EINVAL : 0;
+
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+
+ if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
+ netdev->features |= NETIF_F_TSO6;
+ else
+ netdev->features &= ~NETIF_F_TSO6;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = true;
+ return 0;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
+ if (hw->phy_type == e1000_phy_igp) {
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_A);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_B);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[14] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_C);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[15] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_D);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[16] = (u32)phy_data; /* cable length */
+ regs_buff[17] = 0; /* extended 10bt distance (not needed) */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_PCS_INIT_REG);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
+ regs_buff[20] = 0; /* polarity correction enabled (always) */
+ regs_buff[22] = 0; /* phy receive errors (unavailable) */
+ regs_buff[23] = regs_buff[18]; /* mdix mode */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ } else {
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ if (hw->mac_type >= e1000_82540 &&
+ hw->mac_type < e1000_82571 &&
+ hw->media_type == e1000_media_type_copper) {
+ regs_buff[26] = er32(MANC);
+ }
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ return hw->eeprom.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->eeprom.type == e1000_eeprom_spi)
+ ret_val = e1000_read_eeprom(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->eeprom.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_eeprom(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 conrollers */
+ if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
+ (hw->mac_type == e1000_82573)))
+ e1000_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ char firmware_version[32];
+ u16 eeprom_data;
+
+ strncpy(drvinfo->driver, e1000_driver_name, 32);
+ strncpy(drvinfo->version, e1000_driver_version, 32);
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 8257{1|2|3} controllers */
+ e1000_read_eeprom(hw, 5, 1, &eeprom_data);
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+ break;
+ default:
+ sprintf(firmware_version, "N/A");
+ }
+
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
+
+ ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD;
+ ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
+ E1000_MAX_82544_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr, *tx_old;
+ struct e1000_rx_ring *rxdr, *rx_old;
+ int i, err;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!txdr)
+ goto err_alloc_tx;
+
+ rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!rxdr)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = txdr;
+ adapter->rx_ring = rxdr;
+
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_RXD : E1000_MAX_82544_RXD));
+ rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rxdr[i].count = rxdr->count;
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rxdr;
+ adapter->tx_ring = txdr;
+ err = e1000_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+err_setup_tx:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rxdr);
+err_alloc_rx:
+ kfree(txdr);
+err_alloc_tx:
+ e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static const u32 test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test); i++) {
+ writel(write & test[i], address);
+ read = readl(address);
+ if (read != (write & test[i] & mask)) {
+ DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
+ *data = reg;
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+
+ writel(write & mask, address);
+ read = readl(address);
+ if ((read & mask) != (write & mask)) {
+ DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u32 value, before, after;
+ u32 i, toggle;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+ switch (hw->mac_type) {
+ /* there are several bits on newer hardware that are r/w */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ toggle = 0x7FFFF3FF;
+ break;
+ case e1000_82573:
+ case e1000_ich8lan:
+ toggle = 0x7FFFF033;
+ break;
+ default:
+ toggle = 0xFFFFF833;
+ break;
+ }
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ DPRINTK(DRV, ERR, "failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+ }
+
+ REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = (hw->mac_type == e1000_ich8lan ?
+ 0x06C3B33E : 0x06DFB3FE);
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
+
+ if (hw->mac_type >= e1000_82543) {
+
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ if (hw->mac_type != e1000_ich8lan)
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+ value = (hw->mac_type == e1000_ich8lan ?
+ E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+ for (i = 0; i < value; i++) {
+ REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
+ 0xFFFFFFFF);
+ }
+
+ } else {
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
+
+ }
+
+ value = (hw->mac_type == e1000_ich8lan ?
+ E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+ for (i = 0; i < value; i++)
+ REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16)EEPROM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *)data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI interrupts here, yet */
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev))
+ shared_int = false;
+ else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ DPRINTK(HW, INFO, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+
+ if (hw->mac_type == e1000_ich8lan && i == 8)
+ continue;
+
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, txdr->buffer_info[i].dma,
+ txdr->buffer_info[i].length,
+ PCI_DMA_TODEVICE);
+ if (txdr->buffer_info[i].skb)
+ dev_kfree_skb(txdr->buffer_info[i].skb);
+ }
+ }
+
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
+ rxdr->buffer_info[i].length,
+ PCI_DMA_FROMDEVICE);
+ if (rxdr->buffer_info[i].skb)
+ dev_kfree_skb(rxdr->buffer_info[i].skb);
+ }
+ }
+
+ if (txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
+ txdr->desc = NULL;
+ }
+ if (rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
+ rxdr->desc = NULL;
+ }
+
+ kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+ kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+
+ return;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
+
+ txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!txdr->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ memset(txdr->desc, 0, txdr->size);
+ txdr->next_to_use = txdr->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64)txdr->dma >> 32));
+ ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < txdr->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ txdr->buffer_info[i].skb = skb;
+ txdr->buffer_info[i].length = skb->len;
+ txdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RPS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
+
+ rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!rxdr->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ if (!rxdr->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+ rxdr->next_to_use = rxdr->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64)rxdr->dma >> 32));
+ ew32(RDLEN, rxdr->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rxdr->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rxdr->buffer_info[i].skb = skb;
+ rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
+ rxdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_write_phy_reg(hw, 29, 0x001F);
+ e1000_write_phy_reg(hw, 30, 0x8FFC);
+ e1000_write_phy_reg(hw, 29, 0x001A);
+ e1000_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg;
+
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This
+ * value defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_EPSCR_TX_CLK_25;
+ e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
+
+ /* In addition, because of the s/w reset above, we need to enable
+ * CRS on TX. This must be set for both full and half duplex
+ * operation.
+ */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, phy_reg);
+}
+
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg;
+ u16 phy_reg;
+
+ /* Setup the Device Control Register for PHY loopback test. */
+
+ ctrl_reg = er32(CTRL);
+ ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
+ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Read the PHY Specific Control Register (0x10) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+
+ /* Clear Auto-Crossover bits in PHY Specific Control Register
+ * (bits 6:5).
+ */
+ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+
+ /* Perform software reset on the PHY */
+ e1000_phy_reset(hw);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
+
+ /* Wait for reset to complete. */
+ udelay(500);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_phy_disable_receiver(adapter);
+
+ /* Set the loopback bit in the PHY control register. */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+
+ /* Setup TX_CLK and TX_CRS one more time. */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Check Phy Configuration */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg != 0x4100)
+ return 9;
+
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ if (phy_reg != 0x0070)
+ return 10;
+
+ e1000_read_phy_reg(hw, 29, &phy_reg);
+ if (phy_reg != 0x001A)
+ return 11;
+
+ return 0;
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->autoneg = false;
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
+ /* autoneg off */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+ } else if (hw->phy_type == e1000_phy_gg82563)
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x1CC);
+
+ ctrl_reg = er32(CTRL);
+
+ if (hw->phy_type == e1000_phy_ife) {
+ /* force 100, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ } else {
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+ }
+
+ if (hw->media_type == e1000_media_type_copper &&
+ hw->phy_type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic is half
+ * duplex link is detected. */
+ stat_reg = er32(STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy_type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg = 0;
+ u16 count = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Attempt to setup Loopback mode on Non-integrated PHY.
+ * Some PHY registers get corrupted at random, so
+ * attempt this 10 times.
+ */
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
+ count++ < 10);
+ if (count < 11)
+ return 0;
+ }
+ break;
+
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ return e1000_integrated_phy_loopback(adapter);
+ break;
+
+ default:
+ /* Default PHY loopback work is to read the MII
+ * control register and assert bit 14 (loopback mode).
+ */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ return 0;
+ break;
+ }
+
+ return 8;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ return e1000_set_phy_loopback(adapter);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+#define E1000_SERDES_LB_ON 0x410
+ e1000_set_phy_loopback(adapter);
+ ew32(SCTL, E1000_SERDES_LB_ON);
+ msleep(10);
+ return 0;
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->media_type == e1000_media_type_copper)
+ return e1000_set_phy_loopback(adapter);
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+#define E1000_SERDES_LB_OFF 0x400
+ ew32(SCTL, E1000_SERDES_LB_OFF);
+ msleep(10);
+ break;
+ }
+ /* Fall Through */
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = true;
+ if (hw->phy_type == e1000_phy_gg82563)
+ e1000_write_phy_reg(hw,
+ GG82563_PHY_KMRN_MODE_CTRL,
+ 0x180);
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
+
+ ew32(RDT, rxdr->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if (unlikely(++k == txdr->count)) k = 0;
+ }
+ ew32(TDT, k);
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if (!ret_val)
+ good_cnt++;
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active */
+ if (e1000_check_phy_reset_block(hw)) {
+ DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
+ "when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->serdes_link_down = true;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ e1000_check_for_link(hw);
+ if (!hw->serdes_link_down)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ e1000_check_for_link(hw);
+ if (hw->autoneg) /* if auto_neg is set wait for it */
+ msleep(4000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ *data = 1;
+ }
+ }
+ return *data;
+}
+
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->flags);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ u16 autoneg_advertised = hw->autoneg_advertised;
+ u8 forced_speed_duplex = hw->forced_speed_duplex;
+ u8 autoneg = hw->autoneg;
+
+ DPRINTK(HW, INFO, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ e1000_reset(adapter);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ /* make sure the phy is powered up */
+ e1000_power_up_phy(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ hw->autoneg_advertised = autoneg_advertised;
+ hw->forced_speed_duplex = forced_speed_duplex;
+ hw->autoneg = autoneg;
+
+ e1000_reset(adapter);
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ DPRINTK(HW, INFO, "online testing starting\n");
+ /* Online tests */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ /* these don't support WoL at all */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_COPPER:
+ /* Wake events not supported on port B */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* quad port adapters only support WoL on port A */
+ if (!adapter->quad_port_a) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* KSP3 does not suppport UCAST wake-ups */
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+
+ return;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define E1000_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define E1000_LED_ON 0
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ e1000_led_off(hw);
+ else
+ e1000_led_on(hw);
+
+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
+static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data)
+ data = INT_MAX;
+
+ if (hw->mac_type < e1000_82571) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ e1000_setup_led(hw);
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ } else if (hw->phy_type == e1000_phy_ife) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ } else {
+ e1000_blink_led_start(hw);
+ msleep_interruptible(data * 1000);
+ }
+
+ e1000_led_off(hw);
+ clear_bit(E1000_LED_ON, &adapter->led_status);
+ e1000_cleanup_led(hw);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ e1000_update_stats(adapter);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+/* BUG_ON(i != E1000_STATS_LEN); */
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e1000_gstrings_test,
+ sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = e1000_set_tso,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .phys_id = e1000_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000_get_sset_count,
+};
+
+void e1000_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_ethtool-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,1943 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include "e1000-2.6.33-ethercat.h"
+#include <asm/uaccess.h>
+
+enum {NETDEV_STATS, E1000_STATS};
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(m) E1000_STATS, \
+ sizeof(((struct e1000_adapter *)0)->m), \
+ offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
+ sizeof(((struct net_device *)0)->m), \
+ offsetof(struct net_device, m)
+
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ { "rx_packets", E1000_STAT(stats.gprc) },
+ { "tx_packets", E1000_STAT(stats.gptc) },
+ { "rx_bytes", E1000_STAT(stats.gorcl) },
+ { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_broadcast", E1000_STAT(stats.bprc) },
+ { "tx_broadcast", E1000_STAT(stats.bptc) },
+ { "rx_multicast", E1000_STAT(stats.mprc) },
+ { "tx_multicast", E1000_STAT(stats.mptc) },
+ { "rx_errors", E1000_STAT(stats.rxerrc) },
+ { "tx_errors", E1000_STAT(stats.txerrc) },
+ { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
+ { "multicast", E1000_STAT(stats.mprc) },
+ { "collisions", E1000_STAT(stats.colc) },
+ { "rx_length_errors", E1000_STAT(stats.rlerrc) },
+ { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
+ { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
+ { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
+ { "tx_window_errors", E1000_STAT(stats.latecol) },
+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+ { "tx_restart_queue", E1000_STAT(restart_queue) },
+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
+};
+
+#define E1000_QUEUE_STATS_LEN 0
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+
+ if (hw->mac_type == e1000_82543)
+ ecmd->transceiver = XCVR_EXTERNAL;
+ else
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+
+ if (hw->mac_type >= e1000_82545)
+ ecmd->transceiver = XCVR_INTERNAL;
+ else
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ if (er32(STATUS) & E1000_STATUS_LU) {
+
+ e1000_get_speed_and_duplex(hw, &adapter->link_speed,
+ &adapter->link_duplex);
+ ecmd->speed = adapter->link_speed;
+
+ /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->autoneg = 1;
+ if (hw->media_type == e1000_media_type_fiber)
+ hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->autoneg_advertised;
+ } else
+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc == E1000_FC_RX_PAUSE)
+ pause->rx_pause = 1;
+ else if (hw->fc == E1000_FC_TX_PAUSE)
+ pause->tx_pause = 1;
+ else if (hw->fc == E1000_FC_FULL) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_FULL;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_RX_PAUSE;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_NONE;
+
+ hw->original_fc = hw->fc;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+ } else
+ retval = ((hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return retval;
+}
+
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->rx_csum;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ adapter->rx_csum = data;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82543) {
+ if (!data)
+ return -EINVAL;
+ return 0;
+ }
+
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((hw->mac_type < e1000_82544) ||
+ (hw->mac_type == e1000_82547))
+ return data ? -EINVAL : 0;
+
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+
+ netdev->features &= ~NETIF_F_TSO6;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = true;
+ return 0;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
+ if (hw->phy_type == e1000_phy_igp) {
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_A);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_B);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[14] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_C);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[15] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_D);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[16] = (u32)phy_data; /* cable length */
+ regs_buff[17] = 0; /* extended 10bt distance (not needed) */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_PCS_INIT_REG);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
+ regs_buff[20] = 0; /* polarity correction enabled (always) */
+ regs_buff[22] = 0; /* phy receive errors (unavailable) */
+ regs_buff[23] = regs_buff[18]; /* mdix mode */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ } else {
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ if (hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ regs_buff[26] = er32(MANC);
+ }
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ return hw->eeprom.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->eeprom.type == e1000_eeprom_spi)
+ ret_val = e1000_read_eeprom(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->eeprom.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_eeprom(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
+ e1000_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+
+ strncpy(drvinfo->driver, e1000_driver_name, 32);
+ strncpy(drvinfo->version, e1000_driver_version, 32);
+
+ sprintf(firmware_version, "N/A");
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
+
+ ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD;
+ ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
+ E1000_MAX_82544_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr, *tx_old;
+ struct e1000_rx_ring *rxdr, *rx_old;
+ int i, err;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!txdr)
+ goto err_alloc_tx;
+
+ rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!rxdr)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = txdr;
+ adapter->rx_ring = rxdr;
+
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_RXD : E1000_MAX_82544_RXD));
+ rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rxdr[i].count = rxdr->count;
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rxdr;
+ adapter->tx_ring = txdr;
+ err = e1000_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+err_setup_tx:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rxdr);
+err_alloc_rx:
+ kfree(txdr);
+err_alloc_tx:
+ e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static const u32 test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test); i++) {
+ writel(write & test[i], address);
+ read = readl(address);
+ if (read != (write & test[i] & mask)) {
+ DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
+ *data = reg;
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+
+ writel(write & mask, address);
+ read = readl(address);
+ if ((read & mask) != (write & mask)) {
+ DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u32 value, before, after;
+ u32 i, toggle;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+
+ /* there are several bits on newer hardware that are r/w */
+ toggle = 0xFFFFF833;
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ DPRINTK(DRV, ERR, "failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+
+ REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = 0x06DFB3FE;
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
+
+ if (hw->mac_type >= e1000_82543) {
+
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+ value = E1000_RAR_ENTRIES;
+ for (i = 0; i < value; i++) {
+ REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
+ 0xFFFFFFFF);
+ }
+
+ } else {
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
+
+ }
+
+ value = E1000_MC_TBL_SIZE;
+ for (i = 0; i < value; i++)
+ REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16)EEPROM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *)data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI interrupts here, yet */
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev))
+ shared_int = false;
+ else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ DPRINTK(HW, INFO, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, txdr->buffer_info[i].dma,
+ txdr->buffer_info[i].length,
+ PCI_DMA_TODEVICE);
+ if (txdr->buffer_info[i].skb)
+ dev_kfree_skb(txdr->buffer_info[i].skb);
+ }
+ }
+
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
+ rxdr->buffer_info[i].length,
+ PCI_DMA_FROMDEVICE);
+ if (rxdr->buffer_info[i].skb)
+ dev_kfree_skb(rxdr->buffer_info[i].skb);
+ }
+ }
+
+ if (txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
+ txdr->desc = NULL;
+ }
+ if (rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
+ rxdr->desc = NULL;
+ }
+
+ kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+ kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+
+ return;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
+
+ txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!txdr->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ memset(txdr->desc, 0, txdr->size);
+ txdr->next_to_use = txdr->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64)txdr->dma >> 32));
+ ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < txdr->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ txdr->buffer_info[i].skb = skb;
+ txdr->buffer_info[i].length = skb->len;
+ txdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RPS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
+
+ rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!rxdr->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ if (!rxdr->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+ rxdr->next_to_use = rxdr->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64)rxdr->dma >> 32));
+ ew32(RDLEN, rxdr->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rxdr->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rxdr->buffer_info[i].skb = skb;
+ rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
+ rxdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_write_phy_reg(hw, 29, 0x001F);
+ e1000_write_phy_reg(hw, 30, 0x8FFC);
+ e1000_write_phy_reg(hw, 29, 0x001A);
+ e1000_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg;
+
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This
+ * value defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_EPSCR_TX_CLK_25;
+ e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
+
+ /* In addition, because of the s/w reset above, we need to enable
+ * CRS on TX. This must be set for both full and half duplex
+ * operation.
+ */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, phy_reg);
+}
+
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg;
+ u16 phy_reg;
+
+ /* Setup the Device Control Register for PHY loopback test. */
+
+ ctrl_reg = er32(CTRL);
+ ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
+ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Read the PHY Specific Control Register (0x10) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+
+ /* Clear Auto-Crossover bits in PHY Specific Control Register
+ * (bits 6:5).
+ */
+ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+
+ /* Perform software reset on the PHY */
+ e1000_phy_reset(hw);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
+
+ /* Wait for reset to complete. */
+ udelay(500);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_phy_disable_receiver(adapter);
+
+ /* Set the loopback bit in the PHY control register. */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+
+ /* Setup TX_CLK and TX_CRS one more time. */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Check Phy Configuration */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg != 0x4100)
+ return 9;
+
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ if (phy_reg != 0x0070)
+ return 10;
+
+ e1000_read_phy_reg(hw, 29, &phy_reg);
+ if (phy_reg != 0x001A)
+ return 11;
+
+ return 0;
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->autoneg = false;
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
+ /* autoneg off */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+ }
+
+ ctrl_reg = er32(CTRL);
+
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (hw->media_type == e1000_media_type_copper &&
+ hw->phy_type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic is half
+ * duplex link is detected. */
+ stat_reg = er32(STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy_type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg = 0;
+ u16 count = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Attempt to setup Loopback mode on Non-integrated PHY.
+ * Some PHY registers get corrupted at random, so
+ * attempt this 10 times.
+ */
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
+ count++ < 10);
+ if (count < 11)
+ return 0;
+ }
+ break;
+
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ return e1000_integrated_phy_loopback(adapter);
+ break;
+ default:
+ /* Default PHY loopback work is to read the MII
+ * control register and assert bit 14 (loopback mode).
+ */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ return 0;
+ break;
+ }
+
+ return 8;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ return e1000_set_phy_loopback(adapter);
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->media_type == e1000_media_type_copper)
+ return e1000_set_phy_loopback(adapter);
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = true;
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
+
+ ew32(RDT, rxdr->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if (unlikely(++k == txdr->count)) k = 0;
+ }
+ ew32(TDT, k);
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if (!ret_val)
+ good_cnt++;
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ e1000_check_for_link(hw);
+ if (hw->serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ e1000_check_for_link(hw);
+ if (hw->autoneg) /* if auto_neg is set wait for it */
+ msleep(4000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ *data = 1;
+ }
+ }
+ return *data;
+}
+
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ bool if_running;
+
+ if (adapter->ecdev)
+ return;
+
+ if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->flags);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ u16 autoneg_advertised = hw->autoneg_advertised;
+ u8 forced_speed_duplex = hw->forced_speed_duplex;
+ u8 autoneg = hw->autoneg;
+
+ DPRINTK(HW, INFO, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ e1000_reset(adapter);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ /* make sure the phy is powered up */
+ e1000_power_up_phy(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ hw->autoneg_advertised = autoneg_advertised;
+ hw->forced_speed_duplex = forced_speed_duplex;
+ hw->autoneg = autoneg;
+
+ e1000_reset(adapter);
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ DPRINTK(HW, INFO, "online testing starting\n");
+ /* Online tests */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_PCIE:
+ /* these don't support WoL at all */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events not supported on port B */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* quad port adapters only support WoL on port A */
+ if (!adapter->quad_port_a) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* KSP3 does not suppport UCAST wake-ups */
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+
+ return;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define E1000_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define E1000_LED_ON 0
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ e1000_led_off(hw);
+ else
+ e1000_led_on(hw);
+
+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
+static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data)
+ data = INT_MAX;
+
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ e1000_setup_led(hw);
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+
+ e1000_led_off(hw);
+ clear_bit(E1000_LED_ON, &adapter->led_status);
+ e1000_cleanup_led(hw);
+
+ return 0;
+}
+
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->hw.mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p = NULL;
+
+ e1000_update_stats(adapter);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ switch (e1000_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) netdev +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ case E1000_STATS:
+ p = (char *) adapter +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+/* BUG_ON(i != E1000_STATS_LEN); */
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e1000_gstrings_test,
+ sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = e1000_set_tso,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .phys_id = e1000_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
+};
+
+void e1000_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_ethtool-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,1921 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include "e1000.h"
+#include <asm/uaccess.h>
+
+enum {NETDEV_STATS, E1000_STATS};
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(m) E1000_STATS, \
+ sizeof(((struct e1000_adapter *)0)->m), \
+ offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
+ sizeof(((struct net_device *)0)->m), \
+ offsetof(struct net_device, m)
+
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ { "rx_packets", E1000_STAT(stats.gprc) },
+ { "tx_packets", E1000_STAT(stats.gptc) },
+ { "rx_bytes", E1000_STAT(stats.gorcl) },
+ { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_broadcast", E1000_STAT(stats.bprc) },
+ { "tx_broadcast", E1000_STAT(stats.bptc) },
+ { "rx_multicast", E1000_STAT(stats.mprc) },
+ { "tx_multicast", E1000_STAT(stats.mptc) },
+ { "rx_errors", E1000_STAT(stats.rxerrc) },
+ { "tx_errors", E1000_STAT(stats.txerrc) },
+ { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
+ { "multicast", E1000_STAT(stats.mprc) },
+ { "collisions", E1000_STAT(stats.colc) },
+ { "rx_length_errors", E1000_STAT(stats.rlerrc) },
+ { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
+ { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
+ { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
+ { "tx_window_errors", E1000_STAT(stats.latecol) },
+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+ { "tx_restart_queue", E1000_STAT(restart_queue) },
+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
+};
+
+#define E1000_QUEUE_STATS_LEN 0
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+
+ if (hw->mac_type == e1000_82543)
+ ecmd->transceiver = XCVR_EXTERNAL;
+ else
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+
+ if (hw->mac_type >= e1000_82545)
+ ecmd->transceiver = XCVR_INTERNAL;
+ else
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ if (er32(STATUS) & E1000_STATUS_LU) {
+
+ e1000_get_speed_and_duplex(hw, &adapter->link_speed,
+ &adapter->link_duplex);
+ ecmd->speed = adapter->link_speed;
+
+ /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->autoneg = 1;
+ if (hw->media_type == e1000_media_type_fiber)
+ hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->autoneg_advertised;
+ } else
+ if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc == E1000_FC_RX_PAUSE)
+ pause->rx_pause = 1;
+ else if (hw->fc == E1000_FC_TX_PAUSE)
+ pause->tx_pause = 1;
+ else if (hw->fc == E1000_FC_FULL) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_FULL;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_RX_PAUSE;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_NONE;
+
+ hw->original_fc = hw->fc;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+ } else
+ retval = ((hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return retval;
+}
+
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->rx_csum;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->rx_csum = data;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82543) {
+ if (!data)
+ return -EINVAL;
+ return 0;
+ }
+
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((hw->mac_type < e1000_82544) ||
+ (hw->mac_type == e1000_82547))
+ return data ? -EINVAL : 0;
+
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+
+ netdev->features &= ~NETIF_F_TSO6;
+
+ DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ adapter->tso_force = true;
+ return 0;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
+ if (hw->phy_type == e1000_phy_igp) {
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_A);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_B);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[14] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_C);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[15] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_D);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[16] = (u32)phy_data; /* cable length */
+ regs_buff[17] = 0; /* extended 10bt distance (not needed) */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_PCS_INIT_REG);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
+ regs_buff[20] = 0; /* polarity correction enabled (always) */
+ regs_buff[22] = 0; /* phy receive errors (unavailable) */
+ regs_buff[23] = regs_buff[18]; /* mdix mode */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ } else {
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ if (hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ regs_buff[26] = er32(MANC);
+ }
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ return hw->eeprom.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->eeprom.type == e1000_eeprom_spi)
+ ret_val = e1000_read_eeprom(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->eeprom.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_eeprom(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
+ e1000_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+
+ strncpy(drvinfo->driver, e1000_driver_name, 32);
+ strncpy(drvinfo->version, e1000_driver_version, 32);
+
+ sprintf(firmware_version, "N/A");
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
+
+ ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD;
+ ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
+ E1000_MAX_82544_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr, *tx_old;
+ struct e1000_rx_ring *rxdr, *rx_old;
+ int i, err;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!txdr)
+ goto err_alloc_tx;
+
+ rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!rxdr)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = txdr;
+ adapter->rx_ring = rxdr;
+
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_RXD : E1000_MAX_82544_RXD));
+ rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rxdr[i].count = rxdr->count;
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rxdr;
+ adapter->tx_ring = txdr;
+ err = e1000_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+err_setup_tx:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rxdr);
+err_alloc_rx:
+ kfree(txdr);
+err_alloc_tx:
+ e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static const u32 test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test); i++) {
+ writel(write & test[i], address);
+ read = readl(address);
+ if (read != (write & test[i] & mask)) {
+ DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
+ *data = reg;
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+
+ writel(write & mask, address);
+ read = readl(address);
+ if ((read & mask) != (write & mask)) {
+ DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u32 value, before, after;
+ u32 i, toggle;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+
+ /* there are several bits on newer hardware that are r/w */
+ toggle = 0xFFFFF833;
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ DPRINTK(DRV, ERR, "failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+
+ REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = 0x06DFB3FE;
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
+
+ if (hw->mac_type >= e1000_82543) {
+
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+ value = E1000_RAR_ENTRIES;
+ for (i = 0; i < value; i++) {
+ REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
+ 0xFFFFFFFF);
+ }
+
+ } else {
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
+
+ }
+
+ value = E1000_MC_TBL_SIZE;
+ for (i = 0; i < value; i++)
+ REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16)EEPROM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *)data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI interrupts here, yet */
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev))
+ shared_int = false;
+ else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ DPRINTK(HW, INFO, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, txdr->buffer_info[i].dma,
+ txdr->buffer_info[i].length,
+ PCI_DMA_TODEVICE);
+ if (txdr->buffer_info[i].skb)
+ dev_kfree_skb(txdr->buffer_info[i].skb);
+ }
+ }
+
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
+ pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
+ rxdr->buffer_info[i].length,
+ PCI_DMA_FROMDEVICE);
+ if (rxdr->buffer_info[i].skb)
+ dev_kfree_skb(rxdr->buffer_info[i].skb);
+ }
+ }
+
+ if (txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
+ txdr->desc = NULL;
+ }
+ if (rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
+ rxdr->desc = NULL;
+ }
+
+ kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+ kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+
+ return;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
+
+ txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!txdr->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ memset(txdr->desc, 0, txdr->size);
+ txdr->next_to_use = txdr->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64)txdr->dma >> 32));
+ ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < txdr->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ txdr->buffer_info[i].skb = skb;
+ txdr->buffer_info[i].length = skb->len;
+ txdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RPS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
+
+ rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!rxdr->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ if (!rxdr->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+ rxdr->next_to_use = rxdr->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64)rxdr->dma >> 32));
+ ew32(RDLEN, rxdr->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rxdr->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rxdr->buffer_info[i].skb = skb;
+ rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
+ rxdr->buffer_info[i].dma =
+ pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
+ PCI_DMA_FROMDEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_write_phy_reg(hw, 29, 0x001F);
+ e1000_write_phy_reg(hw, 30, 0x8FFC);
+ e1000_write_phy_reg(hw, 29, 0x001A);
+ e1000_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg;
+
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This
+ * value defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_EPSCR_TX_CLK_25;
+ e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
+
+ /* In addition, because of the s/w reset above, we need to enable
+ * CRS on TX. This must be set for both full and half duplex
+ * operation.
+ */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, phy_reg);
+}
+
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg;
+ u16 phy_reg;
+
+ /* Setup the Device Control Register for PHY loopback test. */
+
+ ctrl_reg = er32(CTRL);
+ ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
+ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Read the PHY Specific Control Register (0x10) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+
+ /* Clear Auto-Crossover bits in PHY Specific Control Register
+ * (bits 6:5).
+ */
+ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+
+ /* Perform software reset on the PHY */
+ e1000_phy_reset(hw);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
+
+ /* Wait for reset to complete. */
+ udelay(500);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_phy_disable_receiver(adapter);
+
+ /* Set the loopback bit in the PHY control register. */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+
+ /* Setup TX_CLK and TX_CRS one more time. */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Check Phy Configuration */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg != 0x4100)
+ return 9;
+
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ if (phy_reg != 0x0070)
+ return 10;
+
+ e1000_read_phy_reg(hw, 29, &phy_reg);
+ if (phy_reg != 0x001A)
+ return 11;
+
+ return 0;
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->autoneg = false;
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
+ /* autoneg off */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+ }
+
+ ctrl_reg = er32(CTRL);
+
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (hw->media_type == e1000_media_type_copper &&
+ hw->phy_type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic is half
+ * duplex link is detected. */
+ stat_reg = er32(STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy_type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg = 0;
+ u16 count = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Attempt to setup Loopback mode on Non-integrated PHY.
+ * Some PHY registers get corrupted at random, so
+ * attempt this 10 times.
+ */
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
+ count++ < 10);
+ if (count < 11)
+ return 0;
+ }
+ break;
+
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ return e1000_integrated_phy_loopback(adapter);
+ break;
+ default:
+ /* Default PHY loopback work is to read the MII
+ * control register and assert bit 14 (loopback mode).
+ */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ return 0;
+ break;
+ }
+
+ return 8;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ return e1000_set_phy_loopback(adapter);
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->media_type == e1000_media_type_copper)
+ return e1000_set_phy_loopback(adapter);
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = true;
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
+
+ ew32(RDT, rxdr->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ pci_dma_sync_single_for_device(pdev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ PCI_DMA_TODEVICE);
+ if (unlikely(++k == txdr->count)) k = 0;
+ }
+ ew32(TDT, k);
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ pci_dma_sync_single_for_cpu(pdev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ PCI_DMA_FROMDEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if (!ret_val)
+ good_cnt++;
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ e1000_check_for_link(hw);
+ if (hw->serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ e1000_check_for_link(hw);
+ if (hw->autoneg) /* if auto_neg is set wait for it */
+ msleep(4000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ *data = 1;
+ }
+ }
+ return *data;
+}
+
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->flags);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ u16 autoneg_advertised = hw->autoneg_advertised;
+ u8 forced_speed_duplex = hw->forced_speed_duplex;
+ u8 autoneg = hw->autoneg;
+
+ DPRINTK(HW, INFO, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ e1000_reset(adapter);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ /* make sure the phy is powered up */
+ e1000_power_up_phy(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ hw->autoneg_advertised = autoneg_advertised;
+ hw->forced_speed_duplex = forced_speed_duplex;
+ hw->autoneg = autoneg;
+
+ e1000_reset(adapter);
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ DPRINTK(HW, INFO, "online testing starting\n");
+ /* Online tests */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_PCIE:
+ /* these don't support WoL at all */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events not supported on port B */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* quad port adapters only support WoL on port A */
+ if (!adapter->quad_port_a) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* KSP3 does not suppport UCAST wake-ups */
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+
+ return;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define E1000_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define E1000_LED_ON 0
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ e1000_led_off(hw);
+ else
+ e1000_led_on(hw);
+
+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
+static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data)
+ data = INT_MAX;
+
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ e1000_setup_led(hw);
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+
+ e1000_led_off(hw);
+ clear_bit(E1000_LED_ON, &adapter->led_status);
+ e1000_cleanup_led(hw);
+
+ return 0;
+}
+
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->hw.mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p = NULL;
+
+ e1000_update_stats(adapter);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ switch (e1000_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) netdev +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ case E1000_STATS:
+ p = (char *) adapter +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+/* BUG_ON(i != E1000_STATS_LEN); */
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e1000_gstrings_test,
+ sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = e1000_set_tso,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .phys_id = e1000_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
+};
+
+void e1000_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.31-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,8878 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.c
+ * Shared functions for accessing and configuring the MAC
+ */
+
+
+#include "e1000_hw-2.6.31-ethercat.h"
+
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
+static void e1000_release_software_semaphore(struct e1000_hw *hw);
+
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity);
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
+static void e1000_clear_vfta(struct e1000_hw *hw);
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length);
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_get_software_flag(struct e1000_hw *hw);
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+ u32 cnf_base_addr,
+ u32 cnf_size);
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+ u16 offset, u8 *sum);
+static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw,
+ struct e1000_host_mng_command_header
+ *hdr);
+static s32 e1000_mng_write_commit(struct e1000_hw *hw);
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index,
+ u8 byte);
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 *data);
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data);
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static void e1000_release_software_flag(struct e1000_hw *hw);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
+static void e1000_phy_init_script(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
+ u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
+static void e1000_release_eeprom(struct e1000_hw *hw);
+static void e1000_standby_eeprom(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+
+/* IGP cable length table */
+static const
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
+ { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
+
+static const
+u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
+/******************************************************************************
+ * Set the phy type member in the hw struct.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_phy_type");
+
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ hw->phy_type = e1000_phy_igp;
+ break;
+ }
+ case IGP03E1000_E_PHY_ID:
+ hw->phy_type = e1000_phy_igp_3;
+ break;
+ case IFE_E_PHY_ID:
+ case IFE_PLUS_E_PHY_ID:
+ case IFE_C_E_PHY_ID:
+ hw->phy_type = e1000_phy_ife;
+ break;
+ case GG82563_E_PHY_ID:
+ if (hw->mac_type == e1000_80003es2lan) {
+ hw->phy_type = e1000_phy_gg82563;
+ break;
+ }
+ /* Fall Through */
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * IGP phy init script - initializes the GbE PHY
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ DEBUGFUNC("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ msleep(20);
+
+ e1000_write_phy_reg(hw,0x0000,0x0140);
+
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
+
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
+
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused);
+ e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
+}
+
+/******************************************************************************
+ * Set the mac type member in the hw struct.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ case E1000_DEV_ID_82571EB_COPPER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ hw->mac_type = e1000_82571;
+ break;
+ case E1000_DEV_ID_82572EI_COPPER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82572EI:
+ hw->mac_type = e1000_82572;
+ break;
+ case E1000_DEV_ID_82573E:
+ case E1000_DEV_ID_82573E_IAMT:
+ case E1000_DEV_ID_82573L:
+ hw->mac_type = e1000_82573;
+ break;
+ case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
+ case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->mac_type = e1000_80003es2lan;
+ break;
+ case E1000_DEV_ID_ICH8_IGP_M_AMT:
+ case E1000_DEV_ID_ICH8_IGP_AMT:
+ case E1000_DEV_ID_ICH8_IGP_C:
+ case E1000_DEV_ID_ICH8_IFE:
+ case E1000_DEV_ID_ICH8_IFE_GT:
+ case E1000_DEV_ID_ICH8_IFE_G:
+ case E1000_DEV_ID_ICH8_IGP_M:
+ hw->mac_type = e1000_ich8lan;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_ich8lan:
+ hw->swfwhw_semaphore_present = true;
+ hw->asf_firmware_present = true;
+ break;
+ case e1000_80003es2lan:
+ hw->swfw_sync_present = true;
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ hw->eeprom_semaphore_present = true;
+ /* fall through */
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = true;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = true;
+
+ /* capable of receiving management packets to the host */
+ if (hw->mac_type >= e1000_82571)
+ hw->has_manc2h = true;
+
+ /* In rare occasions, ESB2 systems would end up started without
+ * the RX unit being turned on.
+ */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->rx_needs_kicking = true;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = true;
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * Set media type and TBI compatibility.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * **************************************************************************/
+void e1000_set_media_type(struct e1000_hw *hw)
+{
+ u32 status;
+
+ DEBUGFUNC("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ case e1000_ich8lan:
+ case e1000_82573:
+ /* The STATUS_TBIMODE bit is reserved or reused for the this
+ * device.
+ */
+ hw->media_type = e1000_media_type_copper;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
+}
+
+/******************************************************************************
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ u32 timeout;
+ u32 extcnf_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ if (hw->bus_type == e1000_bus_type_pci_express) {
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
+ }
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ msleep(5);
+ }
+
+ /* Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset. */
+ if (hw->mac_type == e1000_82573) {
+ timeout = 10;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ do {
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+ else
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ msleep(2);
+ timeout--;
+ } while (timeout);
+ }
+
+ /* Workaround for ICH8 bit corruption issue in FIFO memory */
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Set Tx and Rx buffer allocation to 8k apiece. */
+ ew32(PBA, E1000_PBA_8K);
+ /* Set Packet Buffer Size to 16k. */
+ ew32(PBS, E1000_PBS_16K);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_ich8lan:
+ if (!hw->phy_reset_disable &&
+ e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+ /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+ * at the same time to make sure the interface between
+ * MAC and the external PHY is reset.
+ */
+ ctrl |= E1000_CTRL_PHY_RST;
+ }
+
+ e1000_get_software_flag(hw);
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ msleep(5);
+ break;
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ case e1000_82573:
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ /* fall through */
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ if (hw->mac_type == e1000_ich8lan) {
+ u32 kab = er32(KABGTXD);
+ kab |= E1000_KABGTXD_BGSQLBIAS;
+ ew32(KABGTXD, kab);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ *
+ * Initialize a number of hardware-dependent bits
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * This function contains hardware limitation workarounds for PCI-E adapters
+ *
+ *****************************************************************************/
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
+{
+ if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
+ /* Settings common to all PCI-express silicon */
+ u32 reg_ctrl, reg_ctrl_ext;
+ u32 reg_tarc0, reg_tarc1;
+ u32 reg_tctl;
+ u32 reg_txdctl, reg_txdctl1;
+
+ /* link autonegotiation/sync workarounds */
+ reg_tarc0 = er32(TARC0);
+ reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
+
+ /* Enable not-done TX descriptor counting */
+ reg_txdctl = er32(TXDCTL);
+ reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL, reg_txdctl);
+ reg_txdctl1 = er32(TXDCTL1);
+ reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL1, reg_txdctl1);
+
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ /* Clear PHY TX compatible mode bits */
+ reg_tarc1 = er32(TARC1);
+ reg_tarc1 &= ~((1 << 30)|(1 << 29));
+
+ /* link autonegotiation/sync workarounds */
+ reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23));
+
+ /* TX ring control fixes */
+ reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ case e1000_82573:
+ reg_ctrl_ext = er32(CTRL_EXT);
+ reg_ctrl_ext &= ~(1 << 23);
+ reg_ctrl_ext |= (1 << 22);
+
+ /* TX byte count fix */
+ reg_ctrl = er32(CTRL);
+ reg_ctrl &= ~(1 << 29);
+
+ ew32(CTRL_EXT, reg_ctrl_ext);
+ ew32(CTRL, reg_ctrl);
+ break;
+ case e1000_80003es2lan:
+ /* improve small packet performace for fiber/serdes */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ reg_tarc0 &= ~(1 << 20);
+ }
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ reg_tarc1 = er32(TARC1);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ case e1000_ich8lan:
+ /* Reduce concurrent DMA requests to 3 from 4 */
+ if ((hw->revision_id < 3) ||
+ ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+ (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
+ reg_tarc0 |= ((1 << 29)|(1 << 28));
+
+ reg_ctrl_ext = er32(CTRL_EXT);
+ reg_ctrl_ext |= (1 << 22);
+ ew32(CTRL_EXT, reg_ctrl_ext);
+
+ /* workaround TX hang with TSO=on */
+ reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ reg_tarc1 = er32(TARC1);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ /* workaround TX hang with TSO=on */
+ reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ default:
+ break;
+ }
+
+ ew32(TARC0, reg_tarc0);
+ }
+}
+
+/******************************************************************************
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ *****************************************************************************/
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 reg_data;
+ u32 ctrl_ext;
+
+ DEBUGFUNC("e1000_init_hw");
+
+ /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
+ if ((hw->mac_type == e1000_ich8lan) &&
+ ((hw->revision_id < 3) ||
+ ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+ (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
+ reg_data = er32(STATUS);
+ reg_data &= ~0x80000000;
+ ew32(STATUS, reg_data);
+ }
+
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Must be called after e1000_set_media_type because media_type is used */
+ e1000_initialize_hardware_bits(hw);
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
+ if (hw->mac_type != e1000_ich8lan) {
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+ }
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ if (hw->mac_type == e1000_ich8lan)
+ mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occuring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
+
+ /* More time needed for PHY to initialize */
+ if (hw->mac_type == e1000_ich8lan)
+ msleep(15);
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
+
+ if (hw->mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(hw);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_80003es2lan:
+ /* Enable retransmit on late collisions */
+ reg_data = er32(TCTL);
+ reg_data |= E1000_TCTL_RTLC;
+ ew32(TCTL, reg_data);
+
+ /* Configure Gigabit Carry Extend Padding */
+ reg_data = er32(TCTL_EXT);
+ reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
+ ew32(TCTL_EXT, reg_data);
+
+ /* Configure Transmit Inter-Packet Gap */
+ reg_data = er32(TIPG);
+ reg_data &= ~E1000_TIPG_IPGT_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ ew32(TIPG, reg_data);
+
+ reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
+ reg_data &= ~0x00100000;
+ E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data);
+ /* Fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_ich8lan:
+ ctrl = er32(TXDCTL1);
+ ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL1, ctrl);
+ break;
+ }
+
+
+ if (hw->mac_type == e1000_82573) {
+ u32 gcr = er32(GCR);
+ gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+ ew32(GCR, gcr);
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ /* ICH8 No-snoop bits are opposite polarity.
+ * Set to snoop by default after reset. */
+ if (hw->mac_type == e1000_ich8lan)
+ e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return ret_val;
+}
+
+/******************************************************************************
+ * Adjust SERDES output amplitude based on EEPROM setting.
+ *
+ * hw - Struct containing variables accessed by shared code.
+ *****************************************************************************/
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+{
+ u16 eeprom_data;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_adjust_serdes_amplitude");
+
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Configures flow control and link settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the apropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ *****************************************************************************/
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_setup_link");
+
+ /* In the case of the phy reset being blocked, we already have a link.
+ * We do not have to set it up again. */
+ if (e1000_check_phy_reset_block(hw))
+ return E1000_SUCCESS;
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ switch (hw->mac_type) {
+ case e1000_ich8lan:
+ case e1000_82573:
+ hw->fc = E1000_FC_FULL;
+ break;
+ default:
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ break;
+ }
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
+
+ hw->original_fc = hw->fc;
+
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) :
+ e1000_setup_fiber_serdes_link(hw);
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
+
+ /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
+ if (hw->mac_type != e1000_ich8lan) {
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+ }
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/******************************************************************************
+ * Sets up link for a fiber based or serdes based adapter
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ *****************************************************************************/
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_setup_fiber_serdes_link");
+
+ /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists
+ * until explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
+ ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK);
+
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-neogtiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled\n");
+
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ hw->txcw = txcw;
+ msleep(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Make sure we have a valid PHY and change PHY mode before link setup.
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_preconfig");
+
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
+
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
+
+ return E1000_SUCCESS;
+}
+
+
+/********************************************************************
+* Copper link setup for e1000_phy_igp series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_igp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ if (hw->mac_type != e1000_ich8lan) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = e1000_set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D0\n");
+ return ret_val;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisment is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Copper link setup for e1000_phy_gg82563 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+ u32 reg_data;
+
+ DEBUGFUNC("e1000_copper_link_ggp_setup");
+
+ if (!hw->phy_reset_disable) {
+
+ /* Enable CRS on TX for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+ /* Use 25MHz for both link down and 1000BASE-T for Tx clock */
+ phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
+ break;
+ case 2:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+ } /* phy_reset_disable */
+
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Bypass RX and TX FIFO's */
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data = er32(CTRL_EXT);
+ reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
+ ew32(CTRL_EXT, reg_data);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Do not init these registers when the HW is in IAMT mode, since the
+ * firmware will have already initialized them. We only initialize
+ * them if the HW is not in IAMT mode.
+ */
+ if (!e1000_check_mng_mode(hw)) {
+ /* Enable Electrical Idle on the PHY */
+ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ phy_data);
+
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Workaround: Disable padding in Kumeran interface in the MAC
+ * and in the PHY to avoid CRC errors.
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data |= GG82563_ICR_DIS_PADDING;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Copper link setup for e1000_phy_m88 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Setup auto-negotiation and flow control advertisements,
+* and then perform auto-negotiation.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* IFE phy only supports 10/100 */
+ if (hw->phy_type == e1000_phy_ife)
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->get_link_status = true;
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Config the MAC and the PHY after link is up.
+* 1) Set up the MAC to the current PHY speed/duplex
+* if we are on 82543. If we
+* are on newer silicon, we only need to configure
+* collision distance in the Transmit Control Register.
+* 2) Set up flow control on the MAC to that established with
+* the link partner.
+* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
+
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Detects which PHY is present and setup the speed and duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+ u16 reg_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ /* Set the mac to wait the maximum time between each
+ * iteration and increase the max iterations when
+ * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= 0x3F;
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+ if (ret_val)
+ return ret_val;
+ default:
+ break;
+ }
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ /* Kumeran registers are written-only */
+ reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
+ reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_copper_link_ggp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
+
+ DEBUGOUT("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Configure the MAC-to-PHY interface for 10/100Mbps
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u32 tipg;
+ u16 reg_data;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_10_100");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
+ ew32(TIPG, tipg);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ if (duplex == HALF_DUPLEX)
+ reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+ else
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return ret_val;
+}
+
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 reg_data;
+ u32 tipg;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_1000");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ ew32(TIPG, tipg);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Configures PHY autoneg and flow control advertisement settings
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ DEBUGFUNC("e1000_phy_setup_autoneg");
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type != e1000_phy_ife) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ } else
+ mii_1000t_ctrl_reg=0;
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ if (hw->phy_type == e1000_phy_ife) {
+ DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+ }
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (hw->phy_type != e1000_phy_ife) {
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Force PHY speed and duplex settings to hw->forced_speed_duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
+
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ DEBUGOUT("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ DEBUGOUT("Forcing 10mb ");
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IFE_PMC_AUTO_MDIX;
+ phy_data &= ~IFE_PMC_FORCE_MDIX;
+
+ ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ msleep(100);
+ }
+ if ((i == 0) &&
+ ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563))) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ /* The TX_CLK of the Extended PHY Specific Control Register defaults
+ * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if
+ * we're not in a forced 10/duplex configuration. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
+ if ((hw->forced_speed_duplex == e1000_10_full) ||
+ (hw->forced_speed_duplex == e1000_10_half))
+ phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ;
+ else
+ phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ;
+
+ /* Also due to the reset, we need to enable CRS on Tx. */
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Sets the collision distance in the Transmit Control register
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Link should have been established previously. Reads the speed and duplex
+* information from the Device Status register.
+******************************************************************************/
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
+
+ DEBUGFUNC("e1000_config_collision_dist");
+
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+}
+
+/******************************************************************************
+* Sets MAC speed and duplex settings to reflect the those in the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* mii_reg - data to write to the MII control register
+*
+* The contents of the PHY register containing the needed information need to
+* be passed in.
+******************************************************************************/
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_config_mac_to_phy");
+
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Forces the MAC's flow control settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ *****************************************************************************/
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Configures flow control settings after link is established
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automaticaly set to the negotiated flow control mode.
+ *****************************************************************************/
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
+
+ DEBUGFUNC("e1000_config_fc_after_link_up");
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc = E1000_FC_TX_PAUSE;
+ DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ DEBUGOUT("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Checks to see if the link status of the hardware has changed.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg) return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+ /* If we don't have link (auto-negotiation failed or link partner cannot
+ * auto-negotiate), the cable is plugged in (we have signal), and our
+ * link partner is not trying to auto-negotiate with us (we are receiving
+ * idles or data), we need to force link up. We also need to give
+ * auto-negotiation time to complete, in case the cable was just plugged
+ * in. The autoneg_failed flag does this.
+ */
+ else if ((((hw->media_type == e1000_media_type_fiber) &&
+ ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) &&
+ (!(status & E1000_STATUS_LU)) &&
+ (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ return 0;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+ }
+ /* If we are forcing link and we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable forced link in the
+ * Device Control register in an attempt to auto-negotiate with our link
+ * partner.
+ */
+ else if (((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) &&
+ (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_link_down = false;
+ }
+ /* If we force link for non-auto-negotiation switch, check link status
+ * based on MAC synchronization for internal serdes media type.
+ */
+ else if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ !(E1000_TXCW_ANE & er32(TXCW))) {
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ if (E1000_RXCW_SYNCH & er32(RXCW)) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_link_down = false;
+ DEBUGOUT("SERDES: Link is up.\n");
+ }
+ } else {
+ hw->serdes_link_down = true;
+ DEBUGOUT("SERDES: Link is down.\n");
+ }
+ }
+ if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (E1000_TXCW_ANE & er32(TXCW))) {
+ hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS));
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ *****************************************************************************/
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
+ (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ if (*speed == SPEED_1000)
+ ret_val = e1000_configure_kmrn_for_1000(hw);
+ else
+ ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+ ret_val = e1000_kumeran_lock_loss_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Blocks until autoneg completes or times out (~4.5 seconds)
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_wait_autoneg");
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Raises the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/******************************************************************************
+* Lowers the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/******************************************************************************
+* Shifts data bits out to the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* data - Data to send out to the PHY
+* count - Number of bits to shift out
+*
+* Bits are shifted out in MSB to LSB order.
+******************************************************************************/
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
+{
+ u32 ctrl;
+ u32 mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = er32(CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ udelay(10);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/******************************************************************************
+* Shifts data bits in from the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Bits are shifted in in MSB to LSB order.
+******************************************************************************/
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync = 0;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 timeout = 200;
+
+ DEBUGFUNC("e1000_swfw_sync_acquire");
+
+ if (hw->swfwhw_semaphore_present)
+ return e1000_get_software_flag(hw);
+
+ if (!hw->swfw_sync_present)
+ return e1000_get_hw_eeprom_semaphore(hw);
+
+ while (timeout) {
+ if (e1000_get_hw_eeprom_semaphore(hw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ swfw_sync = er32(SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask))) {
+ break;
+ }
+
+ /* firmware currently using resource (fwmask) */
+ /* or other software thread currently using resource (swmask) */
+ e1000_put_hw_eeprom_semaphore(hw);
+ mdelay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+
+ swfw_sync |= swmask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+ return E1000_SUCCESS;
+}
+
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+
+ DEBUGFUNC("e1000_swfw_sync_release");
+
+ if (hw->swfwhw_semaphore_present) {
+ e1000_release_software_flag(hw);
+ return;
+ }
+
+ if (!hw->swfw_sync_present) {
+ e1000_put_hw_eeprom_semaphore(hw);
+ return;
+ }
+
+ /* if (e1000_get_hw_eeprom_semaphore(hw))
+ * return -E1000_ERR_SWFW_SYNC; */
+ while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
+ /* empty */
+
+ swfw_sync = er32(SW_FW_SYNC);
+ swfw_sync &= ~swmask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+}
+
+/*****************************************************************************
+* Reads the value from a PHY register, if the value is on a specific non zero
+* page, sets the page first.
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to read
+******************************************************************************/
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
+{
+ u32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_read_phy_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+}
+
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY) break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16)mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Writes a value to a PHY register
+*
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to write
+* data - data to write to the PHY
+******************************************************************************/
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ u32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_write_phy_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+}
+
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((u32)phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY) break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32)phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
+}
+
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
+{
+ u32 reg_val;
+ u16 swfw;
+ DEBUGFUNC("e1000_read_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ /* Write register address */
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) |
+ E1000_KUMCTRLSTA_REN;
+ ew32(KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ /* Read the data returned */
+ reg_val = er32(KUMCTRLSTA);
+ *data = (u16)reg_val;
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
+
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
+{
+ u32 reg_val;
+ u16 swfw;
+ DEBUGFUNC("e1000_write_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) | data;
+ ew32(KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Returns the PHY to the power-on reset state
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_phy_hw_reset");
+
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw)) {
+ DEBUGOUT("Unable to acquire swfw sync\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * and deassert. For e1000_82571 hardware and later, we instead delay
+ * for 50us between and 10ms after the deassertion.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type < e1000_82571)
+ msleep(10);
+ else
+ udelay(100);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type >= e1000_82571)
+ mdelay(10);
+
+ e1000_swfw_sync_release(hw, swfw);
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+ e1000_release_software_semaphore(hw);
+
+ if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3))
+ ret_val = e1000_init_lcd_from_nvm(hw);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Resets the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Sets bit 15 of the MII Control register
+******************************************************************************/
+s32 e1000_phy_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_reset");
+
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ case e1000_phy_igp_2:
+ case e1000_phy_igp_3:
+ case e1000_phy_ife:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+ s32 reg;
+ u16 phy_data;
+ s32 retry = 0;
+
+ DEBUGFUNC("e1000_phy_powerdown_workaround");
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return;
+
+ do {
+ /* Disable link */
+ reg = er32(PHY_CTRL);
+ ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* Write VR power-down enable - bits 9:8 should be 10b */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ phy_data |= (1 << 9);
+ phy_data &= ~(1 << 8);
+ e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
+
+ /* Read it back and test */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
+ break;
+
+ /* Issue PHY reset and repeat at most one more time */
+ reg = er32(CTRL);
+ ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+ retry++;
+ } while (retry);
+
+ return;
+
+}
+
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ s32 reg;
+ s32 cnt;
+ u16 phy_data;
+
+ if (hw->kmrn_lock_loss_workaround_disabled)
+ return E1000_SUCCESS;
+
+ /* Make sure link is up before proceeding. If not just return.
+ * Attempting this while link is negotiating fouled up link
+ * stability */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ for (cnt = 0; cnt < 10; cnt++) {
+ /* read once to clear */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+ /* and again to get new status */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* check for PCS lock */
+ if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+ return E1000_SUCCESS;
+
+ /* Issue PHY reset */
+ e1000_phy_hw_reset(hw);
+ mdelay(5);
+ }
+ /* Disable GigE link negotiation */
+ reg = er32(PHY_CTRL);
+ ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* unable to acquire PCS lock */
+ return E1000_ERR_PHY;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Probes the expected PHY address for known PHY IDs
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
+
+ DEBUGFUNC("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* The 82571 firmware may still be configuring the PHY. In this
+ * case, we cannot access the PHY until the configuration is done. So
+ * we explicitly set the PHY values. */
+ if (hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) {
+ hw->phy_id = IGP01E1000_I_PHY_ID;
+ hw->phy_type = e1000_phy_igp_2;
+ return E1000_SUCCESS;
+ }
+
+ /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work-
+ * around that forces PHY page 0 to be set or the reads fail. The rest of
+ * the code in this routine uses e1000_read_phy_reg to read the PHY ID.
+ * So for ESB-2 we need to have this set so our reads won't fail. If the
+ * attached PHY is not a e1000_phy_gg82563, the routines below will figure
+ * this out as well. */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->phy_type = e1000_phy_gg82563;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32)(phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID) match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID) match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID) match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true;
+ break;
+ case e1000_82573:
+ if (hw->phy_id == M88E1111_I_PHY_ID) match = true;
+ break;
+ case e1000_80003es2lan:
+ if (hw->phy_id == GG82563_E_PHY_ID) match = true;
+ break;
+ case e1000_ich8lan:
+ if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_C_E_PHY_ID) match = true;
+ break;
+ default:
+ DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/******************************************************************************
+* Resets the PHY's DSP
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_phy_reset_dsp");
+
+ do {
+ if (hw->phy_type != e1000_phy_gg82563) {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val) break;
+ }
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val) break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val) break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers for igp PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_ife_get_info");
+
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_info->polarity_correction =
+ ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+ IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Polarity is forced. */
+ polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >>
+ IFE_PSC_FORCE_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)
+ ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+ IFE_PMC_MDIX_MODE_SHIFT);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers fot m88 PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ if (hw->phy_type != e1000_phy_gg82563) {
+ phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH);
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ DEBUGOUT("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ DEBUGOUT("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else if (hw->phy_type == e1000_phy_ife)
+ return e1000_phy_ife_get_info(hw, phy_info);
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ DEBUGOUT("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
+}
+
+
+/******************************************************************************
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured. Additionally, if this is ICH8, the flash controller GbE
+ * registers must be mapped, or this will crash.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ DEBUGFUNC("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82573:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = true;
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
+ eeprom->type = e1000_eeprom_flash;
+ eeprom->word_size = 2048;
+
+ /* Ensure that the Autonomous FLASH update bit is cleared due to
+ * Flash update issue on parts which use a FLASH for NVM. */
+ eecd &= ~E1000_EECD_AUPDEN;
+ ew32(EECD, eecd);
+ }
+ break;
+ case e1000_80003es2lan:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_ich8lan:
+ {
+ s32 i = 0;
+ u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
+
+ eeprom->type = e1000_eeprom_ich8;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+
+ /* Zero the shadow RAM structure. But don't load it from NVM
+ * so as to save time for driver init */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ hw->eeprom_shadow_ram[i].modified = false;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+
+ hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) *
+ ICH_FLASH_SECTOR_SIZE;
+
+ hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1;
+ hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK);
+
+ hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
+
+ hw->flash_bank_size /= 2 * sizeof(u16);
+
+ break;
+ }
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ if (hw->mac_type <= e1000_82547_rev_2) {
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+ } else {
+ eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+ }
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
+}
+
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i=0;
+
+ DEBUGFUNC("e1000_acquire_eeprom");
+
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
+ eecd = er32(EECD);
+
+ if (hw->mac_type != e1000_82573) {
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+ return -E1000_ERR_EEPROM;
+ }
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
+}
+
+/******************************************************************************
+ * Terminates a command by inverting the EEPROM's chip select pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_release_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ DEBUGFUNC("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
+
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
+
+ DEBUGFUNC("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ DEBUGFUNC("e1000_read_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+ (words == 0)) {
+ DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) {
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Eerd register EEPROM access requires no eeprom aquire/release */
+ if (eeprom->use_eerd)
+ return e1000_read_eeprom_eerd(hw, offset, words, data);
+
+ /* ICH EEPROM access is done via the ICH flash controller */
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_read_eeprom_ich8(hw, offset, words, data);
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should relase it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 i, eerd = 0;
+ s32 error = 0;
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
+ E1000_EEPROM_RW_REG_START;
+
+ ew32(EERD, eerd);
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
+
+ if (error) {
+ break;
+ }
+ data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA);
+
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word from the EEPROM using the EEWR register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 register_value = 0;
+ u32 i = 0;
+ s32 error = 0;
+
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
+
+ for (i = 0; i < words; i++) {
+ register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
+ ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
+ E1000_EEPROM_RW_REG_START;
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+ if (error) {
+ break;
+ }
+
+ ew32(EEWR, register_value);
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+
+ if (error) {
+ break;
+ }
+ }
+
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+ return error;
+}
+
+/******************************************************************************
+ * Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 done = E1000_ERR_EEPROM;
+
+ for (i = 0; i < attempts; i++) {
+ if (eerd == E1000_EEPROM_POLL_READ)
+ reg = er32(EERD);
+ else
+ reg = er32(EEWR);
+
+ if (reg & E1000_EEPROM_RW_REG_DONE) {
+ done = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ return done;
+}
+
+/***************************************************************************
+* Description: Determines if the onboard NVM is FLASH or EEPROM.
+*
+* hw - Struct containing variables accessed by shared code
+****************************************************************************/
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd = 0;
+
+ DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
+
+ if (hw->mac_type == e1000_ich8lan)
+ return false;
+
+ if (hw->mac_type == e1000_82573) {
+ eecd = er32(EECD);
+
+ /* Isolate bits 15 & 16 */
+ eecd = ((eecd >> 15) & 0x03);
+
+ /* If both bits are set, device is Flash type */
+ if (eecd == 0x03) {
+ return false;
+ }
+ }
+ return true;
+}
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *****************************************************************************/
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+ if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) {
+ /* Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed. */
+ e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
+ if ((eeprom_data & 0x10) == 0) {
+ /* Read 0x23 and check bit 15. This bit is a 1 when the checksum
+ * has already been fixed. If the checksum is still wrong and this
+ * bit is a 1, we need to return bad checksum. Otherwise, we need
+ * to set this bit to a 1 and update the checksum. */
+ e1000_read_eeprom(hw, 0x23, 1, &eeprom_data);
+ if ((eeprom_data & 0x8000) == 0) {
+ eeprom_data |= 0x8000;
+ e1000_write_eeprom(hw, 0x23, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+ }
+
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Drivers must allocate the shadow ram structure for the
+ * EEPROM checksum to be updated. Otherwise, this bit as well
+ * as the checksum must both be set correctly for this
+ * validation to pass.
+ */
+ e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+ if ((eeprom_data & 0x40) == 0) {
+ eeprom_data |= 0x40;
+ e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16)EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+
+/******************************************************************************
+ * Calculates the EEPROM checksum and writes it to the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ *****************************************************************************/
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16)EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ DEBUGOUT("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ } else if (hw->eeprom.type == e1000_eeprom_flash) {
+ e1000_commit_shadow_ram(hw);
+ } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+ e1000_commit_shadow_ram(hw);
+ /* Reload the EEPROM, or else modifications will not appear
+ * until after next adapter reset. */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ msleep(10);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Parent function for writing words to the different EEPROM types.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - 16 bit word to be written to the EEPROM
+ *
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ *****************************************************************************/
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ DEBUGFUNC("e1000_write_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+ (words == 0)) {
+ DEBUGOUT("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* 82573 writes only through eewr */
+ if (eeprom->use_eewr)
+ return e1000_write_eeprom_eewr(hw, offset, words, data);
+
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_write_eeprom_ich8(hw, offset, words, data);
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in an SPI EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - pointer to array of 8 bit words to be written to the EEPROM
+ *
+ *****************************************************************************/
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_spi");
+
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
+
+ e1000_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
+ eeprom->address_bits);
+
+ /* Send the data */
+
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
+
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx)*2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - pointer to array of 16 bit words to be written to the EEPROM
+ *
+ *****************************************************************************/
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16)(eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO) break;
+ udelay(50);
+ }
+ if (i == 200) {
+ DEBUGOUT("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
+
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16)(eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Flushes the cached eeprom to NVM. This is done by saving the modified values
+ * in the eeprom cache and the non modified values in the currently active bank
+ * to the new bank.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
+{
+ u32 attempts = 100000;
+ u32 eecd = 0;
+ u32 flop = 0;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 old_bank_offset = 0;
+ u32 new_bank_offset = 0;
+ u8 low_byte = 0;
+ u8 high_byte = 0;
+ bool sector_write_failed = false;
+
+ if (hw->mac_type == e1000_82573) {
+ /* The flop register will be used to determine if flash type is STM */
+ flop = er32(FLOP);
+ for (i=0; i < attempts; i++) {
+ eecd = er32(EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* If STM opcode located in bits 15:8 of flop, reset firmware */
+ if ((flop & 0xFF00) == E1000_STM_OPCODE) {
+ ew32(HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Perform the flash update */
+ ew32(EECD, eecd | E1000_EECD_FLUPD);
+
+ for (i=0; i < attempts; i++) {
+ eecd = er32(EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+ /* We're writing to the opposite bank so if we're on bank 1,
+ * write to bank 0 etc. We also need to erase the segment that
+ * is going to be written */
+ if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
+ new_bank_offset = hw->flash_bank_size * 2;
+ old_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 1);
+ } else {
+ old_bank_offset = hw->flash_bank_size * 2;
+ new_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 0);
+ }
+
+ sector_write_failed = false;
+ /* Loop for every byte in the shadow RAM,
+ * which is in units of words. */
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ /* Determine whether to write the value stored
+ * in the other NVM bank or a modified value stored
+ * in the shadow RAM */
+ if (hw->eeprom_shadow_ram[i].modified) {
+ low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset, low_byte);
+
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+ else {
+ high_byte =
+ (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+ udelay(100);
+ }
+ } else {
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+ &low_byte);
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset, low_byte);
+
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+ else {
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+ &high_byte);
+ udelay(100);
+ }
+ }
+
+ /* If the write of the low byte was successful, go ahead and
+ * write the high byte while checking to make sure that if it
+ * is the signature byte, then it is handled properly */
+ if (!sector_write_failed) {
+ /* If the word is 0x13, then make sure the signature bits
+ * (15:14) are 11b until the commit has completed.
+ * This will allow us to write 10b which indicates the
+ * signature is valid. We want to do this after the write
+ * has completed so that we don't mark the segment valid
+ * while the write is still in progress */
+ if (i == E1000_ICH_NVM_SIG_WORD)
+ high_byte = E1000_ICH_NVM_SIG_MASK | high_byte;
+
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset + 1, high_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+
+ } else {
+ /* If the write failed then break from the loop and
+ * return an error */
+ break;
+ }
+ }
+
+ /* Don't bother writing the segment valid bits if sector
+ * programming failed. */
+ if (!sector_write_failed) {
+ /* Finally validate the new segment by setting bit 15:14
+ * to 10b in word 0x13 , this can be done without an
+ * erase as well since these bits are 11 to start with
+ * and we need to change bit 14 to 0b */
+ e1000_read_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+ &high_byte);
+ high_byte &= 0xBF;
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
+ /* And invalidate the previously valid segment by setting
+ * its signature word (0x13) high_byte to 0b. This can be
+ * done without an erase because flash erase sets all bits
+ * to 1's. We can write 1's to 0's without an erase */
+ if (error == E1000_SUCCESS) {
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
+ }
+
+ /* Clear the now not used entry in the cache */
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ hw->eeprom_shadow_ram[i].modified = false;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+ u16 offset;
+ u16 eeprom_data, i;
+
+ DEBUGFUNC("e1000_read_mac_addr");
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ case e1000_80003es2lan:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Initializes receive address filters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive addresss registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ *****************************************************************************/
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
+{
+ u32 i;
+ u32 rar_num;
+
+ DEBUGFUNC("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Reserve a spot for the Locally Administered Address to work around
+ * an 82571 issue in which a reset on one port will reload the MAC on
+ * the other port. */
+ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present))
+ rar_num -= 1;
+ if (hw->mac_type == e1000_ich8lan)
+ rar_num = E1000_RAR_ENTRIES_ICH8LAN;
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Hashes an address to determine its location in the multicast table
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *****************************************************************************/
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [47:38] i.e. 0x158 for above example address */
+ hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2));
+ } else {
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ }
+ break;
+ case 1:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [46:37] i.e. 0x2B1 for above example address */
+ hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3));
+ } else {
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ }
+ break;
+ case 2:
+ if (hw->mac_type == e1000_ich8lan) {
+ /*[45:36] i.e. 0x163 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ } else {
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ }
+ break;
+ case 3:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [43:34] i.e. 0x18D for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ } else {
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ }
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_value &= 0x3FF;
+
+ return hash_value;
+}
+
+/******************************************************************************
+ * Sets the bit in the multicast table corresponding to the hash value.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ *****************************************************************************/
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+ u32 temp;
+
+ /* The MTA is a register array of 128 32-bit registers.
+ * It is treated like an array of 4096 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 5) & 0x7F;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_reg &= 0x1F;
+
+ hash_bit = hash_value & 0x1F;
+
+ mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ /* If we are on an 82544 and we are trying to write an odd offset
+ * in the MTA, save off the previous entry before writing and
+ * restore the old value after writing.
+ */
+ if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Puts an ethernet address into a receive address register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * addr - Address to put into receive address register
+ * index - Receive address register to write
+ *****************************************************************************/
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ if (hw->leave_av_bit_off)
+ break;
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/******************************************************************************
+ * Writes a value to the specified offset in the VLAN filter table.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - Offset in VLAN filer table to write
+ * value - Value to write into VLAN filter table
+ *****************************************************************************/
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ u32 temp;
+
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Clears the VLAN filer table
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
+ if (hw->mac_type == e1000_82573) {
+ if (hw->mng_cookie.vlan_id != 0) {
+ /* The VFTA is a 4096b bit-field, each identifying a single VLAN
+ * ID. The following operations determine which 32b entry
+ * (i.e. offset) into the array we want to set the VLAN ID
+ * (i.e. bit) of the manageability unit. */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
+ E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
+ }
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ DEBUGFUNC("e1000_id_led_init");
+
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
+
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ if ((hw->mac_type == e1000_82573) &&
+ (eeprom_data == ID_LED_RESERVED_82573))
+ eeprom_data = ID_LED_DEFAULT_82573;
+ else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ if (hw->mac_type == e1000_ich8lan)
+ eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+ else
+ eeprom_data = ID_LED_DEFAULT;
+ }
+
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_setup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16)(hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_blink_led_start(struct e1000_hw *hw)
+{
+ s16 i;
+ u32 ledctl_blink = 0;
+
+ DEBUGFUNC("e1000_id_led_blink_on");
+
+ if (hw->mac_type < e1000_82571) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+ ledctl_blink = hw->ledctl_mode2;
+ for (i=0; i < 4; i++)
+ if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+ }
+
+ ew32(LEDCTL, ledctl_blink);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Restores the saved state of the SW controlable LED.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_cleanup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ break;
+ }
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Turns on the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Turns off the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Clears all hardware statistics counters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+ }
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+ }
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543) return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544) return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+
+ if (hw->mac_type <= e1000_82547_rev_2) return;
+
+ temp = er32(IAC);
+ temp = er32(ICRXOC);
+
+ if (hw->mac_type == e1000_ich8lan) return;
+
+ temp = er32(ICRXPTC);
+ temp = er32(ICRXATC);
+ temp = er32(ICTXPTC);
+ temp = er32(ICTXATC);
+ temp = er32(ICTXQEC);
+ temp = er32(ICTXQMTC);
+ temp = er32(ICRXDMTC);
+}
+
+/******************************************************************************
+ * Resets Adaptive IFS to its default state.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ *****************************************************************************/
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_reset_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/******************************************************************************
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * tx_packets - Number of transmits since last callback
+ * total_collisions - Number of collisions since last callback
+ *****************************************************************************/
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val = hw->ifs_min_val;
+ else
+ hw->current_ifs_val += hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/******************************************************************************
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ *
+ * hw - Struct containing variables accessed by shared code
+ * frame_len - The length of the frame in question
+ * mac_addr - The Ethernet destination address of the frame in question
+ *****************************************************************************/
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
+{
+ u64 carry_bit;
+
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
+
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
+}
+
+/******************************************************************************
+ * Gets the current PCI bus type, speed, and width of the hardware
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void e1000_get_bus_info(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 pci_ex_link_status;
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
+ ret_val = e1000_read_pcie_cap_reg(hw,
+ PCI_EX_LINK_STATUS,
+ &pci_ex_link_status);
+ if (ret_val)
+ hw->bus_width = e1000_bus_width_unknown;
+ else
+ hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >>
+ PCI_EX_LINK_WIDTH_SHIFT;
+ break;
+ case e1000_ich8lan:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
+ hw->bus_width = e1000_bus_width_pciex_1;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
+}
+
+/******************************************************************************
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset to write to
+ * value - value to write
+ *****************************************************************************/
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
+
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
+}
+
+/******************************************************************************
+ * Estimates the cable length.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * min_length - The estimated minimum length
+ * max_length - The estimated maximum length
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ *****************************************************************************/
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
+{
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
+
+ DEBUGFUNC("e1000_get_cable_length");
+
+ *min_length = *max_length = 0;
+
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+ switch (cable_length) {
+ case e1000_gg_cable_length_60:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_60;
+ break;
+ case e1000_gg_cable_length_60_115:
+ *min_length = e1000_igp_cable_length_60;
+ *max_length = e1000_igp_cable_length_115;
+ break;
+ case e1000_gg_cable_length_115_150:
+ *min_length = e1000_igp_cable_length_115;
+ *max_length = e1000_igp_cable_length_150;
+ break;
+ case e1000_gg_cable_length_150:
+ *min_length = e1000_igp_cable_length_150;
+ *max_length = e1000_igp_cable_length_180;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ {IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D};
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+ (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
+
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
+
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
+
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ } else if (hw->phy_type == e1000_phy_igp_2 ||
+ hw->phy_type == e1000_phy_igp_3) {
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ {IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D};
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Getting bits 15:9, which represent the combination of course and
+ * fine gain values. The result is a number that can be put into
+ * the lookup table to obtain the approximate cable length. */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0))
+ return -E1000_ERR_PHY;
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ *max_length = agc_value + IGP02E1000_AGC_RANGE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Check the cable polarity
+ *
+ * hw - Struct containing variables accessed by shared code
+ * polarity - output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ *****************************************************************************/
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_polarity");
+
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >>
+ IFE_PESC_POLARITY_REVERSED_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Check if Downshift occured
+ *
+ * hw - Struct containing variables accessed by shared code
+ * downshift - output parameter : 0 - No Downshift ocured.
+ * 1 - Downshift ocured.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ *****************************************************************************/
+static s32 e1000_check_downshift(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_downshift");
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ /* e1000_phy_ife supports 10/100 speed only */
+ hw->speed_downgraded = false;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+{
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ {IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D};
+ u16 min_length, max_length;
+
+ DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (speed == SPEED_1000) {
+
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled) &&
+ min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state = e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
+ (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
+ hw->ffe_config_state = e1000_ffe_config_active;
+
+ ret_val = e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
+
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * Set PHY to class A mode
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ *
+ * hw - Struct containing variables accessed by shared code
+ ****************************************************************************/
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisment
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * hw: Struct containing variables accessed by shared code
+ * active - true to enable lplu false to disable lplu.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+ && hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->mac_type == e1000_ich8lan) {
+ /* MAC writes into PHY register based on the state transition
+ * and start auto-negotiation. SW driver can overwrite the settings
+ * in CSR PHY power control E1000_PHY_CTRL register. */
+ phy_ctrl = er32(PHY_CTRL);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * This function sets the lplu d0 state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisment
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * hw: Struct containing variables accessed by shared code
+ * active - true to enable lplu false to disable lplu.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
+{
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d0_lplu_state");
+
+ if (hw->mac_type <= e1000_82547_rev_2)
+ return E1000_SUCCESS;
+
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl = er32(PHY_CTRL);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+
+ } else {
+
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_set_vco_speed");
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ /* Set PHY register 30, page 5, bit 8 to 0 */
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function reads the cookie from ARC ram.
+ *
+ * returns: - E1000_SUCCESS .
+ ****************************************************************************/
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
+{
+ u8 i;
+ u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
+
+ length = (length >> 2);
+ offset = (offset >> 2);
+
+ for (i = 0; i < length; i++) {
+ *((u32 *)buffer + i) =
+ E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
+ }
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks whether the HOST IF is enabled for command operaton
+ * and also checks whether the previous command is completed.
+ * It busy waits in case of previous command is not completed.
+ *
+ * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
+ * timeout
+ * - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+ u32 hicr;
+ u8 i;
+
+ /* Check that the host interface is enabled. */
+ hicr = er32(HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
+ DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+ hicr = er32(HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
+ mdelay(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ DEBUGOUT("Previous command timeout failed .\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * This function writes the buffer content at the offset given on the host if.
+ * It also does alignment considerations to do the writes in most efficient way.
+ * Also fills up the sum of the buffer in *buffer parameter.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+ u16 offset, u8 *sum)
+{
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
+ return -E1000_ERR_PARAM;
+ }
+
+ tmp = (u8 *)&data;
+ prev_bytes = offset & 0x3;
+ offset &= 0xFFFC;
+ offset >>= 2;
+
+ if (prev_bytes) {
+ data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
+ for (j = prev_bytes; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data);
+ length -= j - prev_bytes;
+ offset++;
+ }
+
+ remaining = length & 0x3;
+ length -= remaining;
+
+ /* Calculate length in DWORDs */
+ length >>= 2;
+
+ /* The device driver writes the relevant command block into the
+ * ram area. */
+ for (i = 0; i < length; i++) {
+ for (j = 0; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(u32); j++) {
+ if (j < remaining)
+ *(tmp + j) = *bufptr++;
+ else
+ *(tmp + j) = 0;
+
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function writes the command header after does the checksum calculation.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr)
+{
+ u16 i;
+ u8 sum;
+ u8 *buffer;
+
+ /* Write the whole command header structure which includes sum of
+ * the buffer */
+
+ u16 length = sizeof(struct e1000_host_mng_command_header);
+
+ sum = hdr->checksum;
+ hdr->checksum = 0;
+
+ buffer = (u8 *)hdr;
+ i = length;
+ while (i--)
+ sum += buffer[i];
+
+ hdr->checksum = 0 - sum;
+
+ length >>= 2;
+ /* The device driver writes the relevant command block into the ram area. */
+ for (i = 0; i < length; i++) {
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i));
+ E1000_WRITE_FLUSH();
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function indicates to ARC that a new command is pending which completes
+ * one write operation by the driver.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_write_commit(struct e1000_hw *hw)
+{
+ u32 hicr;
+
+ hicr = er32(HICR);
+ /* Setting this bit tells the ARC that a new command is pending. */
+ ew32(HICR, hicr | E1000_HICR_C);
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks the mode of the firmware.
+ *
+ * returns - true when the mode is IAMT or false.
+ ****************************************************************************/
+bool e1000_check_mng_mode(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ fwsm = er32(FWSM);
+
+ if (hw->mac_type == e1000_ich8lan) {
+ if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return true;
+ } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return true;
+
+ return false;
+}
+
+
+/*****************************************************************************
+ * This function writes the dhcp info .
+ ****************************************************************************/
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+ s32 ret_val;
+ struct e1000_host_mng_command_header hdr;
+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ hdr.reserved2 = 0;
+ hdr.checksum = 0;
+
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr),
+ &(hdr.checksum));
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val == E1000_SUCCESS)
+ ret_val = e1000_mng_write_commit(hw);
+ }
+ }
+ return ret_val;
+}
+
+
+/*****************************************************************************
+ * This function calculates the checksum.
+ *
+ * returns - checksum of buffer contents.
+ ****************************************************************************/
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
+{
+ u8 sum = 0;
+ u32 i;
+
+ if (!buffer)
+ return 0;
+
+ for (i=0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8)(0 - sum);
+}
+
+/*****************************************************************************
+ * This function checks whether tx pkt filtering needs to be enabled or not.
+ *
+ * returns - true for packet filtering or false.
+ ****************************************************************************/
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ /* called in init as well as watchdog timer functions */
+
+ s32 ret_val, checksum;
+ bool tx_filter = false;
+ struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
+ u8 *buffer = (u8 *) &(hw->mng_cookie);
+
+ if (e1000_check_mng_mode(hw)) {
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_host_if_read_cookie(hw, buffer);
+ if (ret_val == E1000_SUCCESS) {
+ checksum = hdr->checksum;
+ hdr->checksum = 0;
+ if ((hdr->signature == E1000_IAMT_SIGNATURE) &&
+ checksum == e1000_calculate_mng_checksum((char *)buffer,
+ E1000_MNG_DHCP_COOKIE_LENGTH)) {
+ if (hdr->status &
+ E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
+ tx_filter = true;
+ } else
+ tx_filter = true;
+ } else
+ tx_filter = true;
+ }
+ }
+
+ hw->tx_pkt_filtering = tx_filter;
+ return tx_filter;
+}
+
+/******************************************************************************
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - true/false
+ *
+ *****************************************************************************/
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if (e1000_arc_subsystem_valid(hw)) {
+ fwsm = er32(FWSM);
+ factps = er32(FACTPS);
+
+ if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
+ e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
+ return true;
+ } else
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
+}
+
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
+
+ /* Polarity reversal workaround for forced 10F/10H links. */
+
+ /* Disable the transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
+ mdelay(100);
+ }
+
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Disables PCI-Express master access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - none.
+ *
+ ***************************************************************************/
+static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_set_pci_express_master_disable");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ ew32(CTRL, ctrl);
+}
+
+/*******************************************************************************
+ *
+ * Disables PCI-Express master access and verifies there are no pending requests
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't
+ * caused the master requests to be disabled.
+ * E1000_SUCCESS master requests disabled.
+ *
+ ******************************************************************************/
+s32 e1000_disable_pciex_master(struct e1000_hw *hw)
+{
+ s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+
+ DEBUGFUNC("e1000_disable_pciex_master");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ e1000_set_pci_express_master_disable(hw);
+
+ while (timeout) {
+ if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ else
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Master requests are pending.\n");
+ return -E1000_ERR_MASTER_REQUESTS_PENDING;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*******************************************************************************
+ *
+ * Check for EEPROM Auto Read bit done.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ******************************************************************************/
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 timeout = AUTO_READ_DONE_TIMEOUT;
+
+ DEBUGFUNC("e1000_get_auto_rd_done");
+
+ switch (hw->mac_type) {
+ default:
+ msleep(5);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ while (timeout) {
+ if (er32(EECD) & E1000_EECD_AUTO_RD)
+ break;
+ else msleep(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
+
+ /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
+ * Need to wait for PHY configuration completion before accessing NVM
+ * and PHY. */
+ if (hw->mac_type == e1000_82573)
+ msleep(25);
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * Checks if the PHY configuration is done
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 cfg_mask = E1000_EEPROM_CFG_DONE;
+
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+
+ switch (hw->mac_type) {
+ default:
+ mdelay(10);
+ break;
+ case e1000_80003es2lan:
+ /* Separate *_CFG_DONE_* bit for each port */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
+ /* Fall Through */
+ case e1000_82571:
+ case e1000_82572:
+ while (timeout) {
+ if (er32(EEMNGCTL) & cfg_mask)
+ break;
+ else
+ msleep(1);
+ timeout--;
+ }
+ if (!timeout) {
+ DEBUGOUT("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Using the combination of SMBI and SWESMBI semaphore bits when resetting
+ * adapter or Eeprom access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_EEPROM if fail to access EEPROM.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ s32 timeout;
+ u32 swsm;
+
+ DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
+
+ if (!hw->eeprom_semaphore_present)
+ return E1000_SUCCESS;
+
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Get the SW semaphore. */
+ if (e1000_get_software_semaphore(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Get the FW semaphore. */
+ timeout = hw->eeprom.word_size + 1;
+ while (timeout) {
+ swsm = er32(SWSM);
+ swsm |= E1000_SWSM_SWESMBI;
+ ew32(SWSM, swsm);
+ /* if we managed to set the bit we got the semaphore. */
+ swsm = er32(SWSM);
+ if (swsm & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ timeout--;
+ }
+
+ if (!timeout) {
+ /* Release semaphores */
+ e1000_put_hw_eeprom_semaphore(hw);
+ DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * This function clears HW semaphore bits.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - None.
+ *
+ ***************************************************************************/
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
+
+ if (!hw->eeprom_semaphore_present)
+ return;
+
+ swsm = er32(SWSM);
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Release both semaphores. */
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ } else
+ swsm &= ~(E1000_SWSM_SWESMBI);
+ ew32(SWSM, swsm);
+}
+
+/***************************************************************************
+ *
+ * Obtaining software semaphore bit (SMBI) before resetting PHY.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to obtain semaphore.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
+{
+ s32 timeout = hw->eeprom.word_size + 1;
+ u32 swsm;
+
+ DEBUGFUNC("e1000_get_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan) {
+ return E1000_SUCCESS;
+ }
+
+ while (timeout) {
+ swsm = er32(SWSM);
+ /* If SMBI bit cleared, it is now set and we hold the semaphore */
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release semaphore bit (SMBI).
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static void e1000_release_software_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("e1000_release_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan) {
+ return;
+ }
+
+ swsm = er32(SWSM);
+ /* Release the SW semaphores.*/
+ swsm &= ~E1000_SWSM_SMBI;
+ ew32(SWSM, swsm);
+}
+
+/******************************************************************************
+ * Checks if PHY reset is blocked due to SOL/IDER session, for example.
+ * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to
+ * the caller to figure out how to deal with it.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_BLK_PHY_RESET
+ * E1000_SUCCESS
+ *
+ *****************************************************************************/
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
+{
+ u32 manc = 0;
+ u32 fwsm = 0;
+
+ if (hw->mac_type == e1000_ich8lan) {
+ fwsm = er32(FWSM);
+ return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+ : E1000_BLK_PHY_RESET;
+ }
+
+ if (hw->mac_type > e1000_82547_rev_2)
+ manc = er32(MANC);
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : E1000_SUCCESS;
+}
+
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
+ * may not be provided a DMA clock when no manageability features are
+ * enabled. We do not want to perform any reads/writes to these registers
+ * if this is the case. We read FWSM to determine the manageability mode.
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ fwsm = er32(FWSM);
+ if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
+ return true;
+ break;
+ case e1000_ich8lan:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+{
+ u32 gcr_reg = 0;
+
+ DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+
+ if (hw->bus_type == e1000_bus_type_unknown)
+ e1000_get_bus_info(hw);
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ if (no_snoop) {
+ gcr_reg = er32(GCR);
+ gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+ gcr_reg |= no_snoop;
+ ew32(GCR, gcr_reg);
+ }
+ if (hw->mac_type == e1000_ich8lan) {
+ u32 ctrl_ext;
+
+ ew32(GCR, PCI_EX_82566_SNOOP_ALL);
+
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static s32 e1000_get_software_flag(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl;
+
+ DEBUGFUNC("e1000_get_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("FW or HW locks the resource too long.\n");
+ return -E1000_ERR_CONFIG;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static void e1000_release_software_flag(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+
+ DEBUGFUNC("e1000_release_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ extcnf_ctrl= er32(EXTCNF_CTRL);
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 error = E1000_SUCCESS;
+ u32 flash_bank = 0;
+ u32 act_offset = 0;
+ u32 bank_offset = 0;
+ u16 word = 0;
+ u16 i = 0;
+
+ /* We need to know which is the valid flash bank. In the event
+ * that we didn't allocate eeprom_shadow_ram, we may not be
+ * managing flash_bank. So it cannot be trusted and needs
+ * to be updated with each read.
+ */
+ /* Value of bit 22 corresponds to the flash bank we're on. */
+ flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+
+ /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+ bank_offset = flash_bank * (hw->flash_bank_size * 2);
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ for (i = 0; i < words; i++) {
+ if (hw->eeprom_shadow_ram != NULL &&
+ hw->eeprom_shadow_ram[offset+i].modified) {
+ data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+ } else {
+ /* The NVM part needs a byte offset, hence * 2 */
+ act_offset = bank_offset + ((offset + i) * 2);
+ error = e1000_read_ich8_word(hw, act_offset, &word);
+ if (error != E1000_SUCCESS)
+ break;
+ data[i] = word;
+ }
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register. Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ /* A driver can write to the NVM only if it has eeprom_shadow_ram
+ * allocated. Subsequent reads to the modified words are read from
+ * this cached structure as well. Writes will only go into this
+ * cached structure unless it's followed by a call to
+ * e1000_update_eeprom_checksum() where it will commit the changes
+ * and clear the "modified" field.
+ */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < words; i++) {
+ if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+ hw->eeprom_shadow_ram[offset+i].modified = true;
+ hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+ } else {
+ error = -E1000_ERR_EEPROM;
+ break;
+ }
+ }
+ } else {
+ /* Drivers have the option to not allocate eeprom_shadow_ram as long
+ * as they don't perform any NVM writes. An attempt in doing so
+ * will result in this error.
+ */
+ error = -E1000_ERR_EEPROM;
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+ union ich8_hws_flash_status hsfsts;
+ s32 error = E1000_ERR_EEPROM;
+ s32 i = 0;
+
+ DEBUGFUNC("e1000_ich8_cycle_init");
+
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+
+ /* May be check the Flash Des Valid bit in Hw status */
+ if (hsfsts.hsf_status.fldesvalid == 0) {
+ DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.");
+ return error;
+ }
+
+ /* Clear FCERR in Hw status by writing 1 */
+ /* Clear DAEL in Hw status by writing a 1 */
+ hsfsts.hsf_status.flcerr = 1;
+ hsfsts.hsf_status.dael = 1;
+
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+
+ /* Either we should have a hardware SPI cycle in progress bit to check
+ * against, in order to start a new cycle or FDONE bit should be changed
+ * in the hardware so that it is 1 after harware reset, which can then be
+ * used as an indication whether a cycle is in progress or has been
+ * completed .. we should also have some software semaphore mechanism to
+ * guard FDONE or the cycle in progress bit so that two threads access to
+ * those bits can be sequentiallized or a way so that 2 threads dont
+ * start the cycle at the same time */
+
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ /* There is no cycle running at present, so we can start a cycle */
+ /* Begin by setting Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+ error = E1000_SUCCESS;
+ } else {
+ /* otherwise poll for sometime so the current cycle has a chance
+ * to end before giving up. */
+ for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ error = E1000_SUCCESS;
+ break;
+ }
+ udelay(1);
+ }
+ if (error == E1000_SUCCESS) {
+ /* Successful in waiting for previous cycle to timeout,
+ * now set the Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+ } else {
+ DEBUGOUT("Flash controller busy, cannot get access");
+ }
+ }
+ return error;
+}
+
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
+{
+ union ich8_hws_flash_ctrl hsflctl;
+ union ich8_hws_flash_status hsfsts;
+ s32 error = E1000_ERR_EEPROM;
+ u32 i = 0;
+
+ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcgo = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* wait till FDONE bit is set to 1 */
+ do {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcdone == 1)
+ break;
+ udelay(1);
+ i++;
+ } while (i < timeout);
+ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+ error = E1000_SUCCESS;
+ }
+ return error;
+}
+
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 *data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
+
+ DEBUGFUNC("e1000_read_ich8_data");
+
+ if (size < 1 || size > 2 || data == NULL ||
+ index > ICH_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ /* TODO: TBD maybe check the index against the size of flash */
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
+
+ /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+ * sequence a few more times, else read in (shift in) the Flash Data0,
+ * the order is least significant byte first msb to lsb */
+ if (error == E1000_SUCCESS) {
+ flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
+ if (size == 1) {
+ *data = (u8)(flash_data & 0x000000FF);
+ } else if (size == 2) {
+ *data = (u16)(flash_data & 0x0000FFFF);
+ }
+ break;
+ } else {
+ /* If we've gotten here, then things are probably completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
+
+ DEBUGFUNC("e1000_write_ich8_data");
+
+ if (size < 1 || size > 2 || data > size * 0xff ||
+ index > ICH_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ if (size == 1)
+ flash_data = (u32)data & 0x00FF;
+ else
+ flash_data = (u32)data;
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
+
+ /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+ * sequence a few more times else done */
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ /* If we're here, then things are most likely completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 word = 0;
+
+ status = e1000_read_ich8_data(hw, index, 1, &word);
+ if (status == E1000_SUCCESS) {
+ *data = (u8)word;
+ }
+
+ return status;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
+{
+ s32 error = E1000_SUCCESS;
+ s32 program_retries = 0;
+
+ DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
+
+ error = e1000_write_ich8_byte(hw, index, byte);
+
+ if (error != E1000_SUCCESS) {
+ for (program_retries = 0; program_retries < 100; program_retries++) {
+ DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index);
+ error = e1000_write_ich8_byte(hw, index, byte);
+ udelay(100);
+ if (error == E1000_SUCCESS)
+ break;
+ }
+ }
+
+ if (program_retries == 100)
+ error = E1000_ERR_EEPROM;
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 word = (u16)data;
+
+ status = e1000_write_ich8_data(hw, index, 1, word);
+
+ return status;
+}
+
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
+{
+ s32 status = E1000_SUCCESS;
+ status = e1000_read_ich8_data(hw, index, 2, data);
+ return status;
+}
+
+/******************************************************************************
+ * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0
+ * based.
+ *
+ * hw - pointer to e1000_hw structure
+ * bank - 0 for first bank, 1 for second bank
+ *
+ * Note that this function may actually erase as much as 8 or 64 KBytes. The
+ * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
+ * bank size may be 4, 8 or 64 KBytes
+ *****************************************************************************/
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ s32 count = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 iteration;
+ s32 sub_sector_size = 0;
+ s32 bank_size;
+ s32 j = 0;
+ s32 error_flag = 0;
+
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+
+ /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+ /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+ * consecutive sectors. The start index for the nth Hw sector can be
+ * calculated as bank * 4096 + n * 256
+ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+ * The start index for the nth Hw sector can be calculated
+ * as bank * 4096
+ * 10: The HW sector is 8K bytes
+ * 11: The Hw sector size is 64K bytes */
+ if (hsfsts.hsf_status.berasesz == 0x0) {
+ /* Hw sector size 256 */
+ sub_sector_size = ICH_FLASH_SEG_SIZE_256;
+ bank_size = ICH_FLASH_SECTOR_SIZE;
+ iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256;
+ } else if (hsfsts.hsf_status.berasesz == 0x1) {
+ bank_size = ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
+ } else if (hsfsts.hsf_status.berasesz == 0x3) {
+ bank_size = ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
+ } else {
+ return error;
+ }
+
+ for (j = 0; j < iteration ; j++) {
+ do {
+ count++;
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS) {
+ error_flag = 1;
+ break;
+ }
+
+ /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+ * Control */
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of an index within the block into Flash
+ * Linear address field in Flash Address. This probably needs to
+ * be calculated here based off the on-chip erase sector size and
+ * the software bank size (4, 8 or 64 KBytes) */
+ flash_linear_address = bank * bank_size + j * sub_sector_size;
+ flash_linear_address += hw->flash_base_addr;
+ flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK;
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT);
+ /* Check if FCERR is set to 1. If 1, clear it and try the whole
+ * sequence a few more times else Done */
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* repeat for some time before giving up */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ error_flag = 1;
+ break;
+ }
+ }
+ } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+ if (error_flag == 1)
+ break;
+ }
+ if (error_flag != 1)
+ error = E1000_SUCCESS;
+ return error;
+}
+
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+ u32 cnf_base_addr,
+ u32 cnf_size)
+{
+ u32 ret_val = E1000_SUCCESS;
+ u16 word_addr, reg_data, reg_addr;
+ u16 i;
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
+
+ /* cnf_size is returned in size of dwords */
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_get_software_flag(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
+
+ e1000_release_software_flag(hw);
+ }
+
+ return ret_val;
+}
+
+
+/******************************************************************************
+ * This function initializes the PHY from the NVM on ICH8 platforms. This
+ * is needed due to an issue where the NVM configuration is not properly
+ * autoloaded after power transitions. Therefore, after each PHY reset, we
+ * will load the configuration data out of the NVM manually.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+ u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ /* Check if SW needs configure the PHY */
+ reg_data = er32(FEXTNVM);
+ if (!(reg_data & FEXTNVM_SW_CONFIG))
+ return E1000_SUCCESS;
+
+ /* Wait for basic configuration completes before proceeding*/
+ loop = 0;
+ do {
+ reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ loop++;
+ } while ((!reg_data) && (loop < 50));
+
+ /* Clear the Init Done bit for the next init event */
+ reg_data = er32(STATUS);
+ reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, reg_data);
+
+ /* Make sure HW does not configure LCD from PHY extended configuration
+ before SW configuration */
+ reg_data = er32(EXTCNF_CTRL);
+ if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+ reg_data = er32(EXTCNF_SIZE);
+ cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+ cnf_size >>= 16;
+ if (cnf_size) {
+ reg_data = er32(EXTCNF_CTRL);
+ cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+ /* cnf_base_addr is in DWORD */
+ cnf_base_addr >>= 16;
+
+ /* Configure LCD from extended configuration region. */
+ ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+ cnf_size);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.31-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3406 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep-2.6.31-ethercat.h"
+
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controlers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_82571,
+ e1000_82572,
+ e1000_82573,
+ e1000_80003es2lan,
+ e1000_ich8lan,
+ e1000_num_macs
+} e1000_mac_type;
+
+typedef enum {
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_ich8,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
+} e1000_eeprom_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+/* Flow Control Settings */
+typedef enum {
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
+} e1000_fc_type;
+
+struct e1000_shadow_ram {
+ u16 eeprom_word;
+ bool modified;
+};
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ /* These PCIe values should literally match the possible return values
+ * from config space */
+ e1000_bus_width_pciex_1 = 1,
+ e1000_bus_width_pciex_2 = 2,
+ e1000_bus_width_pciex_4 = 4,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
+} e1000_igp_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
+} e1000_downshift;
+
+typedef enum {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+} e1000_smart_speed;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+typedef enum {
+ e1000_phy_m88 = 0,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_undefined = 0xFF
+} e1000_phy_type;
+
+typedef enum {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+} e1000_ms_type;
+
+typedef enum {
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
+} e1000_ffe_config;
+
+typedef enum {
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
+} e1000_dsp_config;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_eeprom_info {
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+ bool use_eerd;
+ bool use_eewr;
+};
+
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
+
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+
+#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
+ (((_value) & 0xff00) >> 8))
+
+/* Function prototypes */
+/* Initialization */
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+void e1000_set_media_type(struct e1000_hw *hw);
+
+/* Link Configuration */
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+
+/* PHY */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+
+/* EEPROM Functions */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
+
+/* MNG HOST IF functions */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie{
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie{
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+#endif
+
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_read_mac_addr(struct e1000_hw * hw);
+
+/* Filters (multicast, vlan, receive) */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+/* LED functions */
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
+
+/* Adaptive IFS Functions */
+
+/* Everything else */
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr);
+void e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_pci_set_mwi(struct e1000_hw *hw);
+void e1000_pci_clear_mwi(struct e1000_hw *hw);
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
+/* Port I/O is only supported on 82544 and newer */
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+s32 e1000_disable_pciex_master(struct e1000_hw *hw);
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
+
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82540EP_LOM 0x1016
+#define E1000_DEV_ID_82540EP 0x1017
+#define E1000_DEV_ID_82540EP_LP 0x101E
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
+#define E1000_DEV_ID_82545GM_FIBER 0x1027
+#define E1000_DEV_ID_82545GM_SERDES 0x1028
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
+#define E1000_DEV_ID_82541EI 0x1013
+#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
+#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82547GI 0x1075
+#define E1000_DEV_ID_82541GI 0x1076
+#define E1000_DEV_ID_82541GI_MOBILE 0x1077
+#define E1000_DEV_ID_82541GI_LF 0x107C
+#define E1000_DEV_ID_82546GB_COPPER 0x1079
+#define E1000_DEV_ID_82546GB_FIBER 0x107A
+#define E1000_DEV_ID_82546GB_SERDES 0x107B
+#define E1000_DEV_ID_82546GB_PCIE 0x108A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
+#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
+#define E1000_DEV_ID_82571EB_COPPER 0x105E
+#define E1000_DEV_ID_82571EB_FIBER 0x105F
+#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
+#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
+#define E1000_DEV_ID_82572EI_COPPER 0x107D
+#define E1000_DEV_ID_82572EI_FIBER 0x107E
+#define E1000_DEV_ID_82572EI_SERDES 0x107F
+#define E1000_DEV_ID_82572EI 0x10B9
+#define E1000_DEV_ID_82573E 0x108B
+#define E1000_DEV_ID_82573E_IAMT 0x108C
+#define E1000_DEV_ID_82573L 0x109A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
+
+#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
+#define E1000_DEV_ID_ICH8_IGP_C 0x104B
+#define E1000_DEV_ID_ICH8_IFE 0x104C
+#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
+#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
+#define E1000_DEV_ID_ICH8_IGP_M 0x104D
+
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MAXIMUM_ETHERNET_PACKET_SIZE \
+ (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Additional interrupts need to be handled for e1000_ich8lan:
+ DSW = The FW changed the status of the DISSW bit in FWSM
+ PHYINT = The LAN connected device generates an interrupt
+ EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+ E1000_IMS_DSW | \
+ E1000_IMS_PHYINT | \
+ E1000_IMS_EPRST)
+
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+
+#define E1000_RAR_ENTRIES_ICH8LAN 6
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Decriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+#define E1000_NUM_UNICAST_ICH8LAN 7
+#define E1000_MC_TBL_SIZE_ICH8LAN 32
+
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
+};
+
+/* Number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN 3
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile u8 ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Inteface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_FLA E1000_FLA
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
+#define E1000_82542_ERT E1000_ERT
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
+#define E1000_82542_TDFHS E1000_TDFHS
+#define E1000_82542_TDFTS E1000_TDFTS
+#define E1000_82542_TDFPC E1000_TDFPC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_TDFH 0x08010
+#define E1000_82542_TDFT 0x08018
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
+
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+#define E1000_82542_MANC2H E1000_MANC2H
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ u32 swfw_sync_present;
+ u32 swfwhw_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_link_down;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool kmrn_lock_loss_workaround_disabled;
+ bool bad_tx_carr_stats_fd;
+ bool has_manc2h;
+ bool rx_needs_kicking;
+ bool has_smbus;
+};
+
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#ifndef E1000_EEPROM_GRANT_ATTEMPTS
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
+
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC0
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* SPI EEPROM Status Register */
+#define EEPROM_STATUS_RDY_SPI 0x01
+#define EEPROM_STATUS_WEN_SPI 0x02
+#define EEPROM_STATUS_BP0_SPI 0x04
+#define EEPROM_STATUS_BP1_SPI 0x08
+#define EEPROM_STATUS_WPEN_SPI 0x80
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Inteface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* PCI-Ex registers*/
+
+/* PCI-Ex Control Register */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
+/* PCI-Ex Config Space */
+#define PCI_EX_LINK_STATUS 0x12
+#define PCI_EX_LINK_WIDTH_MASK 0x3F0
+#define PCI_EX_LINK_WIDTH_SHIFT 4
+
+/* EEPROM Commands - Microwire */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */
+
+/* EEPROM Commands - SPI */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Size definitions */
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
+#define EEPROM_SIZE_MASK 0x1C00
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_PHY_CLASS_WORD 0x0007
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
+#define EEPROM_CFG 0x0012
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573 0xF746
+#define ID_LED_DEFAULT_82573 0x1811
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_OFF2 << 8) | \
+ (ID_LED_DEF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+
+/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
+#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
+
+/* Mask bit for PHY class in Word 7 of the EEPROM */
+#define EEPROM_PHY_CLASS_A 0x8000
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
+
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+#define EEPROM_RESERVED_WORD 0xFFFF
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLLISION_DISTANCE_82542 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLD_SHIFT 12
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+
+/* Number of bits required to shift right the "pause" bits from the
+ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
+ */
+#define PAUSE_SHIFT 5
+
+/* Number of bits required to shift left the "SWDPIO" bits from the
+ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
+ */
+#define SWDPIO_SHIFT 17
+
+/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
+ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* Number of bits required to shift left the "ILOS" bit from the EEPROM
+ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
+ */
+#define ILOS_SHIFT 3
+
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* Number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = true;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = false;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+
+/* IGP01E1000 AGC Registers - stores the cable length values*/
+#define IGP01E1000_PHY_AGC_A 0x1172
+#define IGP01E1000_PHY_AGC_B 0x1272
+#define IGP01E1000_PHY_AGC_C 0x1472
+#define IGP01E1000_PHY_AGC_D 0x1872
+
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+/* IGP01E1000 DSP Reset Register */
+#define IGP01E1000_PHY_DSP_RESET 0x1F33
+#define IGP01E1000_PHY_DSP_SET 0x1F71
+#define IGP01E1000_PHY_DSP_FFE 0x1F35
+
+#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
+#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
+#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
+#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
+#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
+
+#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
+#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
+
+#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
+#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
+#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
+#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
+
+#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
+/* IGP01E1000 PCS Initialization register - stores the polarity status when
+ * speed = 1000 Mbps. */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
+
+#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
+ (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG 30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL \
+ GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_SPEC_STATUS \
+ GG82563_REG(0, 17) /* PHY Specific Status */
+#define GG82563_PHY_INT_ENABLE \
+ GG82563_REG(0, 18) /* Interrupt Enable */
+#define GG82563_PHY_SPEC_STATUS_2 \
+ GG82563_REG(0, 19) /* PHY Specific Status 2 */
+#define GG82563_PHY_RX_ERR_CNTR \
+ GG82563_REG(0, 21) /* Receive Error Counter */
+#define GG82563_PHY_PAGE_SELECT \
+ GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 \
+ GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT \
+ GG82563_REG(0, 29) /* Alternate Page Select */
+#define GG82563_PHY_TEST_CLK_CTRL \
+ GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
+
+#define GG82563_PHY_MAC_SPEC_CTRL \
+ GG82563_REG(2, 21) /* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL_2 \
+ GG82563_REG(2, 26) /* MAC Specific Control 2 */
+
+#define GG82563_PHY_DSP_DISTANCE \
+ GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL \
+ GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PORT_RESET \
+ GG82563_REG(193, 17) /* Port Reset */
+#define GG82563_PHY_REVISION_ID \
+ GG82563_REG(193, 18) /* Revision ID */
+#define GG82563_PHY_DEVICE_ID \
+ GG82563_REG(193, 19) /* Device ID */
+#define GG82563_PHY_PWR_MGMT_CTRL \
+ GG82563_REG(193, 20) /* Power Management Control */
+#define GG82563_PHY_RATE_ADAPT_CTRL \
+ GG82563_REG(193, 25) /* Rate Adaptation Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
+ GG82563_REG(194, 16) /* FIFO's Control/Status */
+#define GG82563_PHY_KMRN_CTRL \
+ GG82563_REG(194, 17) /* Control */
+#define GG82563_PHY_INBAND_CTRL \
+ GG82563_REG(194, 18) /* Inband Control */
+#define GG82563_PHY_KMRN_DIAGNOSTIC \
+ GG82563_REG(194, 19) /* Diagnostic */
+#define GG82563_PHY_ACK_TIMEOUTS \
+ GG82563_REG(194, 20) /* Acknowledge Timeouts */
+#define GG82563_PHY_ADV_ABILITY \
+ GG82563_REG(194, 21) /* Advertised Ability */
+#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
+ GG82563_REG(194, 23) /* Link Partner Advertised Ability */
+#define GG82563_PHY_ADV_NEXT_PAGE \
+ GG82563_REG(194, 24) /* Advertised Next Page */
+#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
+ GG82563_REG(194, 25) /* Link Partner Advertised Next page */
+#define GG82563_PHY_KMRN_MISC \
+ GG82563_REG(194, 26) /* Misc. */
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/* IGP01E1000 Specific Port Config Register - R/W */
+#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
+#define IGP01E1000_PSCFR_PRE_EN 0x0020
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
+#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
+#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
+
+/* IGP01E1000 Specific Port Status Register - R/O */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
+#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
+#define IGP01E1000_PSSR_LINK_UP 0x0400
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
+#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+
+/* IGP01E1000 Specific Port Control Register - R/W */
+#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
+#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
+#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
+#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+
+/* IGP01E1000 Specific Port Link Health Register */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
+#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
+#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
+#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
+#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
+#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
+#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
+#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
+#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
+
+/* IGP01E1000 Channel Quality Register */
+#define IGP01E1000_MSE_CHANNEL_D 0x000F
+#define IGP01E1000_MSE_CHANNEL_C 0x00F0
+#define IGP01E1000_MSE_CHANNEL_B 0x0F00
+#define IGP01E1000_MSE_CHANNEL_A 0xF000
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
+/* IGP01E1000 DSP reset macros */
+#define DSP_RESET_ENABLE 0x0
+#define DSP_RESET_DISABLE 0x2
+#define E1000_MAX_DSP_RESETS 10
+
+/* IGP01E1000 & IGP02E1000 AGC Registers */
+
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+
+/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
+#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
+
+/* The precision error of the cable length is +/- 10 meters */
+#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
+
+/* IGP01E1000 PCS Initialization register */
+/* bits 3:6 in the PCS registers stores the channels polarity */
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+/* IGP01E1000 GMII FIFO Register */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+
+/* IGP01E1000 Analog Register */
+#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
+#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
+#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
+#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
+
+#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
+#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
+#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
+#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
+#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
+
+#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
+#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
+#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
+#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */
+#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */
+#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */
+#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */
+#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300
+#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */
+#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */
+#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */
+#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */
+#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12
+
+/* PHY Specific Status Register (Page 0, Register 17) */
+#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */
+#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */
+#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */
+#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */
+#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */
+#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */
+#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */
+#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */
+#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
+#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */
+#define GG82563_PSSR_SPEED_MASK 0xC000
+#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */
+#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */
+#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */
+
+/* PHY Specific Status Register 2 (Page 0, Register 19) */
+#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */
+#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
+#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
+#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
+#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
+#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
+#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
+#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */
+#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */
+#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */
+#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C
+#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */
+#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */
+#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK 0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006
+#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26) */
+#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
+ 1 = 50-80M;
+ 2 = 80-110M;
+ 3 = 110-140M;
+ 4 = >140M */
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
+#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */
+#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */
+#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+
+/* Power Management Control Register (Page 193, Register 20) */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */
+#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */
+#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */
+#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */
+#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
+#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
+#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
+#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */
+
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88_VENDOR 0x0141
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define L1LXT971A_PHY_ID 0x001378E0
+#define GG82563_E_PHY_ID 0x01410CA0
+
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define ICH_CYCLE_READ 0x0
+#define ICH_CYCLE_RESERVED 0x1
+#define ICH_CYCLE_WRITE 0x2
+#define ICH_CYCLE_ERASE 0x3
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_FRACC 0x0050
+#define ICH_FLASH_FREG0 0x0054
+#define ICH_FLASH_FREG1 0x0058
+#define ICH_FLASH_FREG2 0x005C
+#define ICH_FLASH_FREG3 0x0060
+#define ICH_FLASH_FPR0 0x0074
+#define ICH_FLASH_FPR1 0x0078
+#define ICH_FLASH_SSFSTS 0x0090
+#define ICH_FLASH_SSFCTL 0x0092
+#define ICH_FLASH_PREOP 0x0094
+#define ICH_FLASH_OPTYPE 0x0096
+#define ICH_FLASH_OPMENU 0x0098
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+#define ICH_FLASH_SECTOR_SIZE 4096
+#define ICH_GFPREG_BASE_MASK 0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+ struct ich8_hsfsts {
+#ifdef __BIG_ENDIAN
+ u16 reserved2 :6;
+ u16 fldesvalid :1;
+ u16 flockdn :1;
+ u16 flcdone :1;
+ u16 flcerr :1;
+ u16 dael :1;
+ u16 berasesz :2;
+ u16 flcinprog :1;
+ u16 reserved1 :2;
+#else
+ u16 flcdone :1; /* bit 0 Flash Cycle Done */
+ u16 flcerr :1; /* bit 1 Flash Cycle Error */
+ u16 dael :1; /* bit 2 Direct Access error Log */
+ u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */
+ u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */
+ u16 reserved1 :2; /* bit 13:6 Reserved */
+ u16 reserved2 :6; /* bit 13:6 Reserved */
+ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */
+#endif
+ } hsf_status;
+ u16 regval;
+};
+
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+ struct ich8_hsflctl {
+#ifdef __BIG_ENDIAN
+ u16 fldbcount :2;
+ u16 flockdn :6;
+ u16 flcgo :1;
+ u16 flcycle :2;
+ u16 reserved :5;
+#else
+ u16 flcgo :1; /* 0 Flash Cycle Go */
+ u16 flcycle :2; /* 2:1 Flash Cycle */
+ u16 reserved :5; /* 7:3 Reserved */
+ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn :6; /* 15:10 Reserved */
+#endif
+ } hsf_ctrl;
+ u16 regval;
+};
+
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+ struct ich8_flracc {
+#ifdef __BIG_ENDIAN
+ u32 gmwag :8;
+ u32 gmrag :8;
+ u32 grwa :8;
+ u32 grra :8;
+#else
+ u32 grra :8; /* 0:7 GbE region Read Access */
+ u32 grwa :8; /* 8:15 GbE region Write Access */
+ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+#endif
+ } hsf_flregacc;
+ u16 regval;
+};
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/
+
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.31-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,8878 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.c
+ * Shared functions for accessing and configuring the MAC
+ */
+
+
+#include "e1000_hw.h"
+
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
+static void e1000_release_software_semaphore(struct e1000_hw *hw);
+
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity);
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
+static void e1000_clear_vfta(struct e1000_hw *hw);
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length);
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_get_software_flag(struct e1000_hw *hw);
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+ u32 cnf_base_addr,
+ u32 cnf_size);
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+ u16 offset, u8 *sum);
+static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw,
+ struct e1000_host_mng_command_header
+ *hdr);
+static s32 e1000_mng_write_commit(struct e1000_hw *hw);
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index,
+ u8 byte);
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 *data);
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data);
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static void e1000_release_software_flag(struct e1000_hw *hw);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
+static void e1000_phy_init_script(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
+ u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
+static void e1000_release_eeprom(struct e1000_hw *hw);
+static void e1000_standby_eeprom(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+
+/* IGP cable length table */
+static const
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
+ { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
+
+static const
+u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
+/******************************************************************************
+ * Set the phy type member in the hw struct.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_phy_type");
+
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ hw->phy_type = e1000_phy_igp;
+ break;
+ }
+ case IGP03E1000_E_PHY_ID:
+ hw->phy_type = e1000_phy_igp_3;
+ break;
+ case IFE_E_PHY_ID:
+ case IFE_PLUS_E_PHY_ID:
+ case IFE_C_E_PHY_ID:
+ hw->phy_type = e1000_phy_ife;
+ break;
+ case GG82563_E_PHY_ID:
+ if (hw->mac_type == e1000_80003es2lan) {
+ hw->phy_type = e1000_phy_gg82563;
+ break;
+ }
+ /* Fall Through */
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * IGP phy init script - initializes the GbE PHY
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ DEBUGFUNC("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ msleep(20);
+
+ e1000_write_phy_reg(hw,0x0000,0x0140);
+
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
+
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
+
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused);
+ e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
+}
+
+/******************************************************************************
+ * Set the mac type member in the hw struct.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ case E1000_DEV_ID_82571EB_COPPER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ hw->mac_type = e1000_82571;
+ break;
+ case E1000_DEV_ID_82572EI_COPPER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82572EI:
+ hw->mac_type = e1000_82572;
+ break;
+ case E1000_DEV_ID_82573E:
+ case E1000_DEV_ID_82573E_IAMT:
+ case E1000_DEV_ID_82573L:
+ hw->mac_type = e1000_82573;
+ break;
+ case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
+ case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->mac_type = e1000_80003es2lan;
+ break;
+ case E1000_DEV_ID_ICH8_IGP_M_AMT:
+ case E1000_DEV_ID_ICH8_IGP_AMT:
+ case E1000_DEV_ID_ICH8_IGP_C:
+ case E1000_DEV_ID_ICH8_IFE:
+ case E1000_DEV_ID_ICH8_IFE_GT:
+ case E1000_DEV_ID_ICH8_IFE_G:
+ case E1000_DEV_ID_ICH8_IGP_M:
+ hw->mac_type = e1000_ich8lan;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_ich8lan:
+ hw->swfwhw_semaphore_present = true;
+ hw->asf_firmware_present = true;
+ break;
+ case e1000_80003es2lan:
+ hw->swfw_sync_present = true;
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ hw->eeprom_semaphore_present = true;
+ /* fall through */
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = true;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = true;
+
+ /* capable of receiving management packets to the host */
+ if (hw->mac_type >= e1000_82571)
+ hw->has_manc2h = true;
+
+ /* In rare occasions, ESB2 systems would end up started without
+ * the RX unit being turned on.
+ */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->rx_needs_kicking = true;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = true;
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * Set media type and TBI compatibility.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * **************************************************************************/
+void e1000_set_media_type(struct e1000_hw *hw)
+{
+ u32 status;
+
+ DEBUGFUNC("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ case e1000_ich8lan:
+ case e1000_82573:
+ /* The STATUS_TBIMODE bit is reserved or reused for the this
+ * device.
+ */
+ hw->media_type = e1000_media_type_copper;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
+}
+
+/******************************************************************************
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ u32 timeout;
+ u32 extcnf_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ if (hw->bus_type == e1000_bus_type_pci_express) {
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
+ DEBUGOUT("PCI-E Master disable polling has failed.\n");
+ }
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ msleep(5);
+ }
+
+ /* Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset. */
+ if (hw->mac_type == e1000_82573) {
+ timeout = 10;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ do {
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+ else
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ msleep(2);
+ timeout--;
+ } while (timeout);
+ }
+
+ /* Workaround for ICH8 bit corruption issue in FIFO memory */
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Set Tx and Rx buffer allocation to 8k apiece. */
+ ew32(PBA, E1000_PBA_8K);
+ /* Set Packet Buffer Size to 16k. */
+ ew32(PBS, E1000_PBS_16K);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_ich8lan:
+ if (!hw->phy_reset_disable &&
+ e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+ /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+ * at the same time to make sure the interface between
+ * MAC and the external PHY is reset.
+ */
+ ctrl |= E1000_CTRL_PHY_RST;
+ }
+
+ e1000_get_software_flag(hw);
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ msleep(5);
+ break;
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ case e1000_82573:
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ /* fall through */
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ if (hw->mac_type == e1000_ich8lan) {
+ u32 kab = er32(KABGTXD);
+ kab |= E1000_KABGTXD_BGSQLBIAS;
+ ew32(KABGTXD, kab);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ *
+ * Initialize a number of hardware-dependent bits
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * This function contains hardware limitation workarounds for PCI-E adapters
+ *
+ *****************************************************************************/
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
+{
+ if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
+ /* Settings common to all PCI-express silicon */
+ u32 reg_ctrl, reg_ctrl_ext;
+ u32 reg_tarc0, reg_tarc1;
+ u32 reg_tctl;
+ u32 reg_txdctl, reg_txdctl1;
+
+ /* link autonegotiation/sync workarounds */
+ reg_tarc0 = er32(TARC0);
+ reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
+
+ /* Enable not-done TX descriptor counting */
+ reg_txdctl = er32(TXDCTL);
+ reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL, reg_txdctl);
+ reg_txdctl1 = er32(TXDCTL1);
+ reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL1, reg_txdctl1);
+
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ /* Clear PHY TX compatible mode bits */
+ reg_tarc1 = er32(TARC1);
+ reg_tarc1 &= ~((1 << 30)|(1 << 29));
+
+ /* link autonegotiation/sync workarounds */
+ reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23));
+
+ /* TX ring control fixes */
+ reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ case e1000_82573:
+ reg_ctrl_ext = er32(CTRL_EXT);
+ reg_ctrl_ext &= ~(1 << 23);
+ reg_ctrl_ext |= (1 << 22);
+
+ /* TX byte count fix */
+ reg_ctrl = er32(CTRL);
+ reg_ctrl &= ~(1 << 29);
+
+ ew32(CTRL_EXT, reg_ctrl_ext);
+ ew32(CTRL, reg_ctrl);
+ break;
+ case e1000_80003es2lan:
+ /* improve small packet performace for fiber/serdes */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ reg_tarc0 &= ~(1 << 20);
+ }
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ reg_tarc1 = er32(TARC1);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ case e1000_ich8lan:
+ /* Reduce concurrent DMA requests to 3 from 4 */
+ if ((hw->revision_id < 3) ||
+ ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+ (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
+ reg_tarc0 |= ((1 << 29)|(1 << 28));
+
+ reg_ctrl_ext = er32(CTRL_EXT);
+ reg_ctrl_ext |= (1 << 22);
+ ew32(CTRL_EXT, reg_ctrl_ext);
+
+ /* workaround TX hang with TSO=on */
+ reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
+
+ /* Multiple read bit is reversed polarity */
+ reg_tctl = er32(TCTL);
+ reg_tarc1 = er32(TARC1);
+ if (reg_tctl & E1000_TCTL_MULR)
+ reg_tarc1 &= ~(1 << 28);
+ else
+ reg_tarc1 |= (1 << 28);
+
+ /* workaround TX hang with TSO=on */
+ reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
+
+ ew32(TARC1, reg_tarc1);
+ break;
+ default:
+ break;
+ }
+
+ ew32(TARC0, reg_tarc0);
+ }
+}
+
+/******************************************************************************
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ *****************************************************************************/
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 reg_data;
+ u32 ctrl_ext;
+
+ DEBUGFUNC("e1000_init_hw");
+
+ /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
+ if ((hw->mac_type == e1000_ich8lan) &&
+ ((hw->revision_id < 3) ||
+ ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
+ (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
+ reg_data = er32(STATUS);
+ reg_data &= ~0x80000000;
+ ew32(STATUS, reg_data);
+ }
+
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Must be called after e1000_set_media_type because media_type is used */
+ e1000_initialize_hardware_bits(hw);
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
+ if (hw->mac_type != e1000_ich8lan) {
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+ }
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ if (hw->mac_type == e1000_ich8lan)
+ mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occuring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
+
+ /* More time needed for PHY to initialize */
+ if (hw->mac_type == e1000_ich8lan)
+ msleep(15);
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
+
+ if (hw->mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(hw);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_80003es2lan:
+ /* Enable retransmit on late collisions */
+ reg_data = er32(TCTL);
+ reg_data |= E1000_TCTL_RTLC;
+ ew32(TCTL, reg_data);
+
+ /* Configure Gigabit Carry Extend Padding */
+ reg_data = er32(TCTL_EXT);
+ reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
+ ew32(TCTL_EXT, reg_data);
+
+ /* Configure Transmit Inter-Packet Gap */
+ reg_data = er32(TIPG);
+ reg_data &= ~E1000_TIPG_IPGT_MASK;
+ reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ ew32(TIPG, reg_data);
+
+ reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
+ reg_data &= ~0x00100000;
+ E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data);
+ /* Fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_ich8lan:
+ ctrl = er32(TXDCTL1);
+ ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL1, ctrl);
+ break;
+ }
+
+
+ if (hw->mac_type == e1000_82573) {
+ u32 gcr = er32(GCR);
+ gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+ ew32(GCR, gcr);
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ /* ICH8 No-snoop bits are opposite polarity.
+ * Set to snoop by default after reset. */
+ if (hw->mac_type == e1000_ich8lan)
+ e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return ret_val;
+}
+
+/******************************************************************************
+ * Adjust SERDES output amplitude based on EEPROM setting.
+ *
+ * hw - Struct containing variables accessed by shared code.
+ *****************************************************************************/
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+{
+ u16 eeprom_data;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_adjust_serdes_amplitude");
+
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Configures flow control and link settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the apropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ *****************************************************************************/
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_setup_link");
+
+ /* In the case of the phy reset being blocked, we already have a link.
+ * We do not have to set it up again. */
+ if (e1000_check_phy_reset_block(hw))
+ return E1000_SUCCESS;
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ switch (hw->mac_type) {
+ case e1000_ich8lan:
+ case e1000_82573:
+ hw->fc = E1000_FC_FULL;
+ break;
+ default:
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ break;
+ }
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
+
+ hw->original_fc = hw->fc;
+
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) :
+ e1000_setup_fiber_serdes_link(hw);
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
+
+ /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
+ if (hw->mac_type != e1000_ich8lan) {
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+ }
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/******************************************************************************
+ * Sets up link for a fiber based or serdes based adapter
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ *****************************************************************************/
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_setup_fiber_serdes_link");
+
+ /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists
+ * until explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
+ ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK);
+
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-neogtiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled\n");
+
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ hw->txcw = txcw;
+ msleep(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Make sure we have a valid PHY and change PHY mode before link setup.
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_preconfig");
+
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
+
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
+
+ return E1000_SUCCESS;
+}
+
+
+/********************************************************************
+* Copper link setup for e1000_phy_igp series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_igp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ if (hw->mac_type != e1000_ich8lan) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = e1000_set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D0\n");
+ return ret_val;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisment is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Copper link setup for e1000_phy_gg82563 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+ u32 reg_data;
+
+ DEBUGFUNC("e1000_copper_link_ggp_setup");
+
+ if (!hw->phy_reset_disable) {
+
+ /* Enable CRS on TX for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+ /* Use 25MHz for both link down and 1000BASE-T for Tx clock */
+ phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
+ break;
+ case 2:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+ } /* phy_reset_disable */
+
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Bypass RX and TX FIFO's */
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data = er32(CTRL_EXT);
+ reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
+ ew32(CTRL_EXT, reg_data);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Do not init these registers when the HW is in IAMT mode, since the
+ * firmware will have already initialized them. We only initialize
+ * them if the HW is not in IAMT mode.
+ */
+ if (!e1000_check_mng_mode(hw)) {
+ /* Enable Electrical Idle on the PHY */
+ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
+ phy_data);
+
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Workaround: Disable padding in Kumeran interface in the MAC
+ * and in the PHY to avoid CRC errors.
+ */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data |= GG82563_ICR_DIS_PADDING;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Copper link setup for e1000_phy_m88 series.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/********************************************************************
+* Setup auto-negotiation and flow control advertisements,
+* and then perform auto-negotiation.
+*
+* hw - Struct containing variables accessed by shared code
+*********************************************************************/
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* IFE phy only supports 10/100 */
+ if (hw->phy_type == e1000_phy_ife)
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->get_link_status = true;
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Config the MAC and the PHY after link is up.
+* 1) Set up the MAC to the current PHY speed/duplex
+* if we are on 82543. If we
+* are on newer silicon, we only need to configure
+* collision distance in the Transmit Control Register.
+* 2) Set up flow control on the MAC to that established with
+* the link partner.
+* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
+
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Detects which PHY is present and setup the speed and duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+ u16 reg_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ /* Set the mac to wait the maximum time between each
+ * iteration and increase the max iterations when
+ * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= 0x3F;
+ ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+ if (ret_val)
+ return ret_val;
+ default:
+ break;
+ }
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ switch (hw->mac_type) {
+ case e1000_80003es2lan:
+ /* Kumeran registers are written-only */
+ reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
+ reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_copper_link_ggp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
+
+ DEBUGOUT("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Configure the MAC-to-PHY interface for 10/100Mbps
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u32 tipg;
+ u16 reg_data;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_10_100");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
+ ew32(TIPG, tipg);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ if (duplex == HALF_DUPLEX)
+ reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+ else
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return ret_val;
+}
+
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+ u16 reg_data;
+ u32 tipg;
+
+ DEBUGFUNC("e1000_configure_kmrn_for_1000");
+
+ reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT;
+ ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
+ ew32(TIPG, tipg);
+
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+
+ if (ret_val)
+ return ret_val;
+
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Configures PHY autoneg and flow control advertisement settings
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ DEBUGFUNC("e1000_phy_setup_autoneg");
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type != e1000_phy_ife) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ } else
+ mii_1000t_ctrl_reg=0;
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ if (hw->phy_type == e1000_phy_ife) {
+ DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+ }
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (hw->phy_type != e1000_phy_ife) {
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Force PHY speed and duplex settings to hw->forced_speed_duplex
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
+
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ DEBUGOUT("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ DEBUGOUT("Forcing 10mb ");
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IFE_PMC_AUTO_MDIX;
+ phy_data &= ~IFE_PMC_FORCE_MDIX;
+
+ ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ msleep(100);
+ }
+ if ((i == 0) &&
+ ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563))) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ /* The TX_CLK of the Extended PHY Specific Control Register defaults
+ * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if
+ * we're not in a forced 10/duplex configuration. */
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
+ if ((hw->forced_speed_duplex == e1000_10_full) ||
+ (hw->forced_speed_duplex == e1000_10_half))
+ phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ;
+ else
+ phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ;
+
+ /* Also due to the reset, we need to enable CRS on Tx. */
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+
+ ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Sets the collision distance in the Transmit Control register
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Link should have been established previously. Reads the speed and duplex
+* information from the Device Status register.
+******************************************************************************/
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
+
+ DEBUGFUNC("e1000_config_collision_dist");
+
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+}
+
+/******************************************************************************
+* Sets MAC speed and duplex settings to reflect the those in the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* mii_reg - data to write to the MII control register
+*
+* The contents of the PHY register containing the needed information need to
+* be passed in.
+******************************************************************************/
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_config_mac_to_phy");
+
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Forces the MAC's flow control settings.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ *****************************************************************************/
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Configures flow control settings after link is established
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automaticaly set to the negotiated flow control mode.
+ *****************************************************************************/
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
+
+ DEBUGFUNC("e1000_config_fc_after_link_up");
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (hw->autoneg_failed)) ||
+ ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc = E1000_FC_TX_PAUSE;
+ DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ DEBUGOUT("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Checks to see if the link status of the hardware has changed.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+ (!hw->autoneg) &&
+ (hw->forced_speed_duplex == e1000_10_full ||
+ hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg) return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+ /* If we don't have link (auto-negotiation failed or link partner cannot
+ * auto-negotiate), the cable is plugged in (we have signal), and our
+ * link partner is not trying to auto-negotiate with us (we are receiving
+ * idles or data), we need to force link up. We also need to give
+ * auto-negotiation time to complete, in case the cable was just plugged
+ * in. The autoneg_failed flag does this.
+ */
+ else if ((((hw->media_type == e1000_media_type_fiber) &&
+ ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) &&
+ (!(status & E1000_STATUS_LU)) &&
+ (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ return 0;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+ }
+ /* If we are forcing link and we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable forced link in the
+ * Device Control register in an attempt to auto-negotiate with our link
+ * partner.
+ */
+ else if (((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) &&
+ (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_link_down = false;
+ }
+ /* If we force link for non-auto-negotiation switch, check link status
+ * based on MAC synchronization for internal serdes media type.
+ */
+ else if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ !(E1000_TXCW_ANE & er32(TXCW))) {
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ if (E1000_RXCW_SYNCH & er32(RXCW)) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_link_down = false;
+ DEBUGOUT("SERDES: Link is up.\n");
+ }
+ } else {
+ hw->serdes_link_down = true;
+ DEBUGOUT("SERDES: Link is down.\n");
+ }
+ }
+ if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ (E1000_TXCW_ANE & er32(TXCW))) {
+ hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS));
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ *****************************************************************************/
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
+ (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ if (*speed == SPEED_1000)
+ ret_val = e1000_configure_kmrn_for_1000(hw);
+ else
+ ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+ ret_val = e1000_kumeran_lock_loss_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Blocks until autoneg completes or times out (~4.5 seconds)
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_wait_autoneg");
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Raises the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/******************************************************************************
+* Lowers the Management Data Clock
+*
+* hw - Struct containing variables accessed by shared code
+* ctrl - Device control register's current value
+******************************************************************************/
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/******************************************************************************
+* Shifts data bits out to the PHY
+*
+* hw - Struct containing variables accessed by shared code
+* data - Data to send out to the PHY
+* count - Number of bits to shift out
+*
+* Bits are shifted out in MSB to LSB order.
+******************************************************************************/
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
+{
+ u32 ctrl;
+ u32 mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = er32(CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ udelay(10);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/******************************************************************************
+* Shifts data bits in from the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Bits are shifted in in MSB to LSB order.
+******************************************************************************/
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync = 0;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 timeout = 200;
+
+ DEBUGFUNC("e1000_swfw_sync_acquire");
+
+ if (hw->swfwhw_semaphore_present)
+ return e1000_get_software_flag(hw);
+
+ if (!hw->swfw_sync_present)
+ return e1000_get_hw_eeprom_semaphore(hw);
+
+ while (timeout) {
+ if (e1000_get_hw_eeprom_semaphore(hw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ swfw_sync = er32(SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask))) {
+ break;
+ }
+
+ /* firmware currently using resource (fwmask) */
+ /* or other software thread currently using resource (swmask) */
+ e1000_put_hw_eeprom_semaphore(hw);
+ mdelay(5);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+
+ swfw_sync |= swmask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+ return E1000_SUCCESS;
+}
+
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+
+ DEBUGFUNC("e1000_swfw_sync_release");
+
+ if (hw->swfwhw_semaphore_present) {
+ e1000_release_software_flag(hw);
+ return;
+ }
+
+ if (!hw->swfw_sync_present) {
+ e1000_put_hw_eeprom_semaphore(hw);
+ return;
+ }
+
+ /* if (e1000_get_hw_eeprom_semaphore(hw))
+ * return -E1000_ERR_SWFW_SYNC; */
+ while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
+ /* empty */
+
+ swfw_sync = er32(SW_FW_SYNC);
+ swfw_sync &= ~swmask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000_put_hw_eeprom_semaphore(hw);
+}
+
+/*****************************************************************************
+* Reads the value from a PHY register, if the value is on a specific non zero
+* page, sets the page first.
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to read
+******************************************************************************/
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
+{
+ u32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_read_phy_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+}
+
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY) break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16)mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Writes a value to a PHY register
+*
+* hw - Struct containing variables accessed by shared code
+* reg_addr - address of the PHY register to write
+* data - data to write to the PHY
+******************************************************************************/
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ u32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_write_phy_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ if ((hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16)reg_addr);
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* Select Configuration Page */
+ if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ } else {
+ /* Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ ret_val = e1000_write_phy_reg_ex(hw,
+ GG82563_PHY_PAGE_SELECT_ALT,
+ (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
+ }
+
+ if (ret_val) {
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+ }
+ }
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return ret_val;
+}
+
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((u32)phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY) break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32)phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
+}
+
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
+{
+ u32 reg_val;
+ u16 swfw;
+ DEBUGFUNC("e1000_read_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ /* Write register address */
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) |
+ E1000_KUMCTRLSTA_REN;
+ ew32(KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ /* Read the data returned */
+ reg_val = er32(KUMCTRLSTA);
+ *data = (u16)reg_val;
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
+
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
+{
+ u32 reg_val;
+ u16 swfw;
+ DEBUGFUNC("e1000_write_kmrn_reg");
+
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
+ E1000_KUMCTRLSTA_OFFSET) | data;
+ ew32(KUMCTRLSTA, reg_val);
+ udelay(2);
+
+ e1000_swfw_sync_release(hw, swfw);
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Returns the PHY to the power-on reset state
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 swfw;
+
+ DEBUGFUNC("e1000_phy_hw_reset");
+
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ if ((hw->mac_type == e1000_80003es2lan) &&
+ (er32(STATUS) & E1000_STATUS_FUNC_1)) {
+ swfw = E1000_SWFW_PHY1_SM;
+ } else {
+ swfw = E1000_SWFW_PHY0_SM;
+ }
+ if (e1000_swfw_sync_acquire(hw, swfw)) {
+ DEBUGOUT("Unable to acquire swfw sync\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * and deassert. For e1000_82571 hardware and later, we instead delay
+ * for 50us between and 10ms after the deassertion.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type < e1000_82571)
+ msleep(10);
+ else
+ udelay(100);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type >= e1000_82571)
+ mdelay(10);
+
+ e1000_swfw_sync_release(hw, swfw);
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+ e1000_release_software_semaphore(hw);
+
+ if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3))
+ ret_val = e1000_init_lcd_from_nvm(hw);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Resets the PHY
+*
+* hw - Struct containing variables accessed by shared code
+*
+* Sets bit 15 of the MII Control register
+******************************************************************************/
+s32 e1000_phy_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_reset");
+
+ /* In the case of the phy reset being blocked, it's not an error, we
+ * simply return success without performing the reset. */
+ ret_val = e1000_check_phy_reset_block(hw);
+ if (ret_val)
+ return E1000_SUCCESS;
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ case e1000_phy_igp_2:
+ case e1000_phy_igp_3:
+ case e1000_phy_ife:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+ s32 reg;
+ u16 phy_data;
+ s32 retry = 0;
+
+ DEBUGFUNC("e1000_phy_powerdown_workaround");
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return;
+
+ do {
+ /* Disable link */
+ reg = er32(PHY_CTRL);
+ ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* Write VR power-down enable - bits 9:8 should be 10b */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ phy_data |= (1 << 9);
+ phy_data &= ~(1 << 8);
+ e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
+
+ /* Read it back and test */
+ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+ if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
+ break;
+
+ /* Issue PHY reset and repeat at most one more time */
+ reg = er32(CTRL);
+ ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+ retry++;
+ } while (retry);
+
+ return;
+
+}
+
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ s32 reg;
+ s32 cnt;
+ u16 phy_data;
+
+ if (hw->kmrn_lock_loss_workaround_disabled)
+ return E1000_SUCCESS;
+
+ /* Make sure link is up before proceeding. If not just return.
+ * Attempting this while link is negotiating fouled up link
+ * stability */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ for (cnt = 0; cnt < 10; cnt++) {
+ /* read once to clear */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+ /* and again to get new status */
+ ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* check for PCS lock */
+ if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+ return E1000_SUCCESS;
+
+ /* Issue PHY reset */
+ e1000_phy_hw_reset(hw);
+ mdelay(5);
+ }
+ /* Disable GigE link negotiation */
+ reg = er32(PHY_CTRL);
+ ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+ /* unable to acquire PCS lock */
+ return E1000_ERR_PHY;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Probes the expected PHY address for known PHY IDs
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
+
+ DEBUGFUNC("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* The 82571 firmware may still be configuring the PHY. In this
+ * case, we cannot access the PHY until the configuration is done. So
+ * we explicitly set the PHY values. */
+ if (hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) {
+ hw->phy_id = IGP01E1000_I_PHY_ID;
+ hw->phy_type = e1000_phy_igp_2;
+ return E1000_SUCCESS;
+ }
+
+ /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work-
+ * around that forces PHY page 0 to be set or the reads fail. The rest of
+ * the code in this routine uses e1000_read_phy_reg to read the PHY ID.
+ * So for ESB-2 we need to have this set so our reads won't fail. If the
+ * attached PHY is not a e1000_phy_gg82563, the routines below will figure
+ * this out as well. */
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->phy_type = e1000_phy_gg82563;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32)(phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID) match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID) match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID) match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true;
+ break;
+ case e1000_82573:
+ if (hw->phy_id == M88E1111_I_PHY_ID) match = true;
+ break;
+ case e1000_80003es2lan:
+ if (hw->phy_id == GG82563_E_PHY_ID) match = true;
+ break;
+ case e1000_ich8lan:
+ if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true;
+ if (hw->phy_id == IFE_C_E_PHY_ID) match = true;
+ break;
+ default:
+ DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/******************************************************************************
+* Resets the PHY's DSP
+*
+* hw - Struct containing variables accessed by shared code
+******************************************************************************/
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_phy_reset_dsp");
+
+ do {
+ if (hw->phy_type != e1000_phy_gg82563) {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val) break;
+ }
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val) break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val) break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
+
+ return ret_val;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers for igp PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_ife_get_info");
+
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_info->polarity_correction =
+ ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+ IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Polarity is forced. */
+ polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >>
+ IFE_PSC_FORCE_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)
+ ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+ IFE_PMC_MDIX_MODE_SHIFT);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers fot m88 PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ if (hw->phy_type != e1000_phy_gg82563) {
+ phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH);
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+* Get PHY information from various PHY registers
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ DEBUGOUT("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ DEBUGOUT("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else if (hw->phy_type == e1000_phy_ife)
+ return e1000_phy_ife_get_info(hw, phy_info);
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ DEBUGOUT("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
+}
+
+
+/******************************************************************************
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured. Additionally, if this is ICH8, the flash controller GbE
+ * registers must be mapped, or this will crash.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ DEBUGFUNC("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_82573:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = true;
+ if (!e1000_is_onboard_nvm_eeprom(hw)) {
+ eeprom->type = e1000_eeprom_flash;
+ eeprom->word_size = 2048;
+
+ /* Ensure that the Autonomous FLASH update bit is cleared due to
+ * Flash update issue on parts which use a FLASH for NVM. */
+ eecd &= ~E1000_EECD_AUPDEN;
+ ew32(EECD, eecd);
+ }
+ break;
+ case e1000_80003es2lan:
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ eeprom->use_eerd = true;
+ eeprom->use_eewr = false;
+ break;
+ case e1000_ich8lan:
+ {
+ s32 i = 0;
+ u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
+
+ eeprom->type = e1000_eeprom_ich8;
+ eeprom->use_eerd = false;
+ eeprom->use_eewr = false;
+ eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+
+ /* Zero the shadow RAM structure. But don't load it from NVM
+ * so as to save time for driver init */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ hw->eeprom_shadow_ram[i].modified = false;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+
+ hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) *
+ ICH_FLASH_SECTOR_SIZE;
+
+ hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1;
+ hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK);
+
+ hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
+
+ hw->flash_bank_size /= 2 * sizeof(u16);
+
+ break;
+ }
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ if (hw->mac_type <= e1000_82547_rev_2) {
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+ } else {
+ eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+ }
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
+}
+
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd - EECD's current value
+ *****************************************************************************/
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i=0;
+
+ DEBUGFUNC("e1000_acquire_eeprom");
+
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
+ eecd = er32(EECD);
+
+ if (hw->mac_type != e1000_82573) {
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+ return -E1000_ERR_EEPROM;
+ }
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
+}
+
+/******************************************************************************
+ * Terminates a command by inverting the EEPROM's chip select pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_release_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ DEBUGFUNC("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
+
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
+
+ DEBUGFUNC("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ DEBUGFUNC("e1000_read_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+ (words == 0)) {
+ DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) {
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Eerd register EEPROM access requires no eeprom aquire/release */
+ if (eeprom->use_eerd)
+ return e1000_read_eeprom_eerd(hw, offset, words, data);
+
+ /* ICH EEPROM access is done via the ICH flash controller */
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_read_eeprom_ich8(hw, offset, words, data);
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should relase it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16)(offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 i, eerd = 0;
+ s32 error = 0;
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
+ E1000_EEPROM_RW_REG_START;
+
+ ew32(EERD, eerd);
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
+
+ if (error) {
+ break;
+ }
+ data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA);
+
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word from the EEPROM using the EEWR register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 register_value = 0;
+ u32 i = 0;
+ s32 error = 0;
+
+ if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
+ return -E1000_ERR_SWFW_SYNC;
+
+ for (i = 0; i < words; i++) {
+ register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
+ ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
+ E1000_EEPROM_RW_REG_START;
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+ if (error) {
+ break;
+ }
+
+ ew32(EEWR, register_value);
+
+ error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+
+ if (error) {
+ break;
+ }
+ }
+
+ e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+ return error;
+}
+
+/******************************************************************************
+ * Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 done = E1000_ERR_EEPROM;
+
+ for (i = 0; i < attempts; i++) {
+ if (eerd == E1000_EEPROM_POLL_READ)
+ reg = er32(EERD);
+ else
+ reg = er32(EEWR);
+
+ if (reg & E1000_EEPROM_RW_REG_DONE) {
+ done = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ return done;
+}
+
+/***************************************************************************
+* Description: Determines if the onboard NVM is FLASH or EEPROM.
+*
+* hw - Struct containing variables accessed by shared code
+****************************************************************************/
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd = 0;
+
+ DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
+
+ if (hw->mac_type == e1000_ich8lan)
+ return false;
+
+ if (hw->mac_type == e1000_82573) {
+ eecd = er32(EECD);
+
+ /* Isolate bits 15 & 16 */
+ eecd = ((eecd >> 15) & 0x03);
+
+ /* If both bits are set, device is Flash type */
+ if (eecd == 0x03) {
+ return false;
+ }
+ }
+ return true;
+}
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *****************************************************************************/
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+ if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) {
+ /* Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed. */
+ e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
+ if ((eeprom_data & 0x10) == 0) {
+ /* Read 0x23 and check bit 15. This bit is a 1 when the checksum
+ * has already been fixed. If the checksum is still wrong and this
+ * bit is a 1, we need to return bad checksum. Otherwise, we need
+ * to set this bit to a 1 and update the checksum. */
+ e1000_read_eeprom(hw, 0x23, 1, &eeprom_data);
+ if ((eeprom_data & 0x8000) == 0) {
+ eeprom_data |= 0x8000;
+ e1000_write_eeprom(hw, 0x23, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+ }
+
+ if (hw->mac_type == e1000_ich8lan) {
+ /* Drivers must allocate the shadow ram structure for the
+ * EEPROM checksum to be updated. Otherwise, this bit as well
+ * as the checksum must both be set correctly for this
+ * validation to pass.
+ */
+ e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+ if ((eeprom_data & 0x40) == 0) {
+ eeprom_data |= 0x40;
+ e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+ e1000_update_eeprom_checksum(hw);
+ }
+ }
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16)EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+
+/******************************************************************************
+ * Calculates the EEPROM checksum and writes it to the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ *****************************************************************************/
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16)EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ DEBUGOUT("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ } else if (hw->eeprom.type == e1000_eeprom_flash) {
+ e1000_commit_shadow_ram(hw);
+ } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+ e1000_commit_shadow_ram(hw);
+ /* Reload the EEPROM, or else modifications will not appear
+ * until after next adapter reset. */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ msleep(10);
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Parent function for writing words to the different EEPROM types.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - 16 bit word to be written to the EEPROM
+ *
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ *****************************************************************************/
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ DEBUGFUNC("e1000_write_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+ (words == 0)) {
+ DEBUGOUT("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* 82573 writes only through eewr */
+ if (eeprom->use_eewr)
+ return e1000_write_eeprom_eewr(hw, offset, words, data);
+
+ if (eeprom->type == e1000_eeprom_ich8)
+ return e1000_write_eeprom_ich8(hw, offset, words, data);
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in an SPI EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - pointer to array of 8 bit words to be written to the EEPROM
+ *
+ *****************************************************************************/
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_spi");
+
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
+
+ e1000_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
+ eeprom->address_bits);
+
+ /* Send the data */
+
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
+
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx)*2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset within the EEPROM to be written to
+ * words - number of words to write
+ * data - pointer to array of 16 bit words to be written to the EEPROM
+ *
+ *****************************************************************************/
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16)(eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO) break;
+ udelay(50);
+ }
+ if (i == 200) {
+ DEBUGOUT("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
+
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16)(eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Flushes the cached eeprom to NVM. This is done by saving the modified values
+ * in the eeprom cache and the non modified values in the currently active bank
+ * to the new bank.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
+{
+ u32 attempts = 100000;
+ u32 eecd = 0;
+ u32 flop = 0;
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+ u32 old_bank_offset = 0;
+ u32 new_bank_offset = 0;
+ u8 low_byte = 0;
+ u8 high_byte = 0;
+ bool sector_write_failed = false;
+
+ if (hw->mac_type == e1000_82573) {
+ /* The flop register will be used to determine if flash type is STM */
+ flop = er32(FLOP);
+ for (i=0; i < attempts; i++) {
+ eecd = er32(EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* If STM opcode located in bits 15:8 of flop, reset firmware */
+ if ((flop & 0xFF00) == E1000_STM_OPCODE) {
+ ew32(HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Perform the flash update */
+ ew32(EECD, eecd | E1000_EECD_FLUPD);
+
+ for (i=0; i < attempts; i++) {
+ eecd = er32(EECD);
+ if ((eecd & E1000_EECD_FLUPD) == 0) {
+ break;
+ }
+ udelay(5);
+ }
+
+ if (i == attempts) {
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+ /* We're writing to the opposite bank so if we're on bank 1,
+ * write to bank 0 etc. We also need to erase the segment that
+ * is going to be written */
+ if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
+ new_bank_offset = hw->flash_bank_size * 2;
+ old_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 1);
+ } else {
+ old_bank_offset = hw->flash_bank_size * 2;
+ new_bank_offset = 0;
+ e1000_erase_ich8_4k_segment(hw, 0);
+ }
+
+ sector_write_failed = false;
+ /* Loop for every byte in the shadow RAM,
+ * which is in units of words. */
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ /* Determine whether to write the value stored
+ * in the other NVM bank or a modified value stored
+ * in the shadow RAM */
+ if (hw->eeprom_shadow_ram[i].modified) {
+ low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset, low_byte);
+
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+ else {
+ high_byte =
+ (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+ udelay(100);
+ }
+ } else {
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+ &low_byte);
+ udelay(100);
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset, low_byte);
+
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+ else {
+ e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+ &high_byte);
+ udelay(100);
+ }
+ }
+
+ /* If the write of the low byte was successful, go ahead and
+ * write the high byte while checking to make sure that if it
+ * is the signature byte, then it is handled properly */
+ if (!sector_write_failed) {
+ /* If the word is 0x13, then make sure the signature bits
+ * (15:14) are 11b until the commit has completed.
+ * This will allow us to write 10b which indicates the
+ * signature is valid. We want to do this after the write
+ * has completed so that we don't mark the segment valid
+ * while the write is still in progress */
+ if (i == E1000_ICH_NVM_SIG_WORD)
+ high_byte = E1000_ICH_NVM_SIG_MASK | high_byte;
+
+ error = e1000_verify_write_ich8_byte(hw,
+ (i << 1) + new_bank_offset + 1, high_byte);
+ if (error != E1000_SUCCESS)
+ sector_write_failed = true;
+
+ } else {
+ /* If the write failed then break from the loop and
+ * return an error */
+ break;
+ }
+ }
+
+ /* Don't bother writing the segment valid bits if sector
+ * programming failed. */
+ if (!sector_write_failed) {
+ /* Finally validate the new segment by setting bit 15:14
+ * to 10b in word 0x13 , this can be done without an
+ * erase as well since these bits are 11 to start with
+ * and we need to change bit 14 to 0b */
+ e1000_read_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+ &high_byte);
+ high_byte &= 0xBF;
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
+ /* And invalidate the previously valid segment by setting
+ * its signature word (0x13) high_byte to 0b. This can be
+ * done without an erase because flash erase sets all bits
+ * to 1's. We can write 1's to 0's without an erase */
+ if (error == E1000_SUCCESS) {
+ error = e1000_verify_write_ich8_byte(hw,
+ E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
+ }
+
+ /* Clear the now not used entry in the cache */
+ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+ hw->eeprom_shadow_ram[i].modified = false;
+ hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+ }
+ }
+ }
+
+ return error;
+}
+
+/******************************************************************************
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+ u16 offset;
+ u16 eeprom_data, i;
+
+ DEBUGFUNC("e1000_read_mac_addr");
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ case e1000_80003es2lan:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Initializes receive address filters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive addresss registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ *****************************************************************************/
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
+{
+ u32 i;
+ u32 rar_num;
+
+ DEBUGFUNC("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Reserve a spot for the Locally Administered Address to work around
+ * an 82571 issue in which a reset on one port will reload the MAC on
+ * the other port. */
+ if ((hw->mac_type == e1000_82571) && (hw->laa_is_present))
+ rar_num -= 1;
+ if (hw->mac_type == e1000_ich8lan)
+ rar_num = E1000_RAR_ENTRIES_ICH8LAN;
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Hashes an address to determine its location in the multicast table
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *****************************************************************************/
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [47:38] i.e. 0x158 for above example address */
+ hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2));
+ } else {
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ }
+ break;
+ case 1:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [46:37] i.e. 0x2B1 for above example address */
+ hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3));
+ } else {
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ }
+ break;
+ case 2:
+ if (hw->mac_type == e1000_ich8lan) {
+ /*[45:36] i.e. 0x163 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ } else {
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ }
+ break;
+ case 3:
+ if (hw->mac_type == e1000_ich8lan) {
+ /* [43:34] i.e. 0x18D for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ } else {
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ }
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_value &= 0x3FF;
+
+ return hash_value;
+}
+
+/******************************************************************************
+ * Sets the bit in the multicast table corresponding to the hash value.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ *****************************************************************************/
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+ u32 temp;
+
+ /* The MTA is a register array of 128 32-bit registers.
+ * It is treated like an array of 4096 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 5) & 0x7F;
+ if (hw->mac_type == e1000_ich8lan)
+ hash_reg &= 0x1F;
+
+ hash_bit = hash_value & 0x1F;
+
+ mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ /* If we are on an 82544 and we are trying to write an odd offset
+ * in the MTA, save off the previous entry before writing and
+ * restore the old value after writing.
+ */
+ if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Puts an ethernet address into a receive address register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * addr - Address to put into receive address register
+ * index - Receive address register to write
+ *****************************************************************************/
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ if (hw->leave_av_bit_off)
+ break;
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/******************************************************************************
+ * Writes a value to the specified offset in the VLAN filter table.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - Offset in VLAN filer table to write
+ * value - Value to write into VLAN filter table
+ *****************************************************************************/
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ u32 temp;
+
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/******************************************************************************
+ * Clears the VLAN filer table
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ if (hw->mac_type == e1000_ich8lan)
+ return;
+
+ if (hw->mac_type == e1000_82573) {
+ if (hw->mng_cookie.vlan_id != 0) {
+ /* The VFTA is a 4096b bit-field, each identifying a single VLAN
+ * ID. The following operations determine which 32b entry
+ * (i.e. offset) into the array we want to set the VLAN ID
+ * (i.e. bit) of the manageability unit. */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
+ E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
+ }
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ DEBUGFUNC("e1000_id_led_init");
+
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
+
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ if ((hw->mac_type == e1000_82573) &&
+ (eeprom_data == ID_LED_RESERVED_82573))
+ eeprom_data = ID_LED_DEFAULT_82573;
+ else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ if (hw->mac_type == e1000_ich8lan)
+ eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+ else
+ eeprom_data = ID_LED_DEFAULT;
+ }
+
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_setup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16)(hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_blink_led_start(struct e1000_hw *hw)
+{
+ s16 i;
+ u32 ledctl_blink = 0;
+
+ DEBUGFUNC("e1000_id_led_blink_on");
+
+ if (hw->mac_type < e1000_82571) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+ ledctl_blink = hw->ledctl_mode2;
+ for (i=0; i < 4; i++)
+ if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+ }
+
+ ew32(LEDCTL, ledctl_blink);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Restores the saved state of the SW controlable LED.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_cleanup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ break;
+ }
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Turns on the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Turns off the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Clears all hardware statistics counters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+ }
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+ }
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543) return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544) return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+
+ if (hw->mac_type <= e1000_82547_rev_2) return;
+
+ temp = er32(IAC);
+ temp = er32(ICRXOC);
+
+ if (hw->mac_type == e1000_ich8lan) return;
+
+ temp = er32(ICRXPTC);
+ temp = er32(ICRXATC);
+ temp = er32(ICTXPTC);
+ temp = er32(ICTXATC);
+ temp = er32(ICTXQEC);
+ temp = er32(ICTXQMTC);
+ temp = er32(ICRXDMTC);
+}
+
+/******************************************************************************
+ * Resets Adaptive IFS to its default state.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ *****************************************************************************/
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_reset_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/******************************************************************************
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * tx_packets - Number of transmits since last callback
+ * total_collisions - Number of collisions since last callback
+ *****************************************************************************/
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val = hw->ifs_min_val;
+ else
+ hw->current_ifs_val += hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/******************************************************************************
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ *
+ * hw - Struct containing variables accessed by shared code
+ * frame_len - The length of the frame in question
+ * mac_addr - The Ethernet destination address of the frame in question
+ *****************************************************************************/
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
+{
+ u64 carry_bit;
+
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
+
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
+}
+
+/******************************************************************************
+ * Gets the current PCI bus type, speed, and width of the hardware
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void e1000_get_bus_info(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 pci_ex_link_status;
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
+ ret_val = e1000_read_pcie_cap_reg(hw,
+ PCI_EX_LINK_STATUS,
+ &pci_ex_link_status);
+ if (ret_val)
+ hw->bus_width = e1000_bus_width_unknown;
+ else
+ hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >>
+ PCI_EX_LINK_WIDTH_SHIFT;
+ break;
+ case e1000_ich8lan:
+ hw->bus_type = e1000_bus_type_pci_express;
+ hw->bus_speed = e1000_bus_speed_2500;
+ hw->bus_width = e1000_bus_width_pciex_1;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
+}
+
+/******************************************************************************
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset to write to
+ * value - value to write
+ *****************************************************************************/
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
+
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
+}
+
+/******************************************************************************
+ * Estimates the cable length.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * min_length - The estimated minimum length
+ * max_length - The estimated maximum length
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ *****************************************************************************/
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
+{
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
+
+ DEBUGFUNC("e1000_get_cable_length");
+
+ *min_length = *max_length = 0;
+
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_gg82563) {
+ ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+ switch (cable_length) {
+ case e1000_gg_cable_length_60:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_60;
+ break;
+ case e1000_gg_cable_length_60_115:
+ *min_length = e1000_igp_cable_length_60;
+ *max_length = e1000_igp_cable_length_115;
+ break;
+ case e1000_gg_cable_length_115_150:
+ *min_length = e1000_igp_cable_length_115;
+ *max_length = e1000_igp_cable_length_150;
+ break;
+ case e1000_gg_cable_length_150:
+ *min_length = e1000_igp_cable_length_150;
+ *max_length = e1000_igp_cable_length_180;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ {IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D};
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+ (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
+
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
+
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
+
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ } else if (hw->phy_type == e1000_phy_igp_2 ||
+ hw->phy_type == e1000_phy_igp_3) {
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
+ {IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D};
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Getting bits 15:9, which represent the combination of course and
+ * fine gain values. The result is a number that can be put into
+ * the lookup table to obtain the approximate cable length. */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0))
+ return -E1000_ERR_PHY;
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ *max_length = agc_value + IGP02E1000_AGC_RANGE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Check the cable polarity
+ *
+ * hw - Struct containing variables accessed by shared code
+ * polarity - output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ *****************************************************************************/
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_polarity");
+
+ if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ } else if (hw->phy_type == e1000_phy_ife) {
+ ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >>
+ IFE_PESC_POLARITY_REVERSED_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Check if Downshift occured
+ *
+ * hw - Struct containing variables accessed by shared code
+ * downshift - output parameter : 0 - No Downshift ocured.
+ * 1 - Downshift ocured.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ *****************************************************************************/
+static s32 e1000_check_downshift(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_downshift");
+
+ if (hw->phy_type == e1000_phy_igp ||
+ hw->phy_type == e1000_phy_igp_3 ||
+ hw->phy_type == e1000_phy_igp_2) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if ((hw->phy_type == e1000_phy_m88) ||
+ (hw->phy_type == e1000_phy_gg82563)) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ } else if (hw->phy_type == e1000_phy_ife) {
+ /* e1000_phy_ife supports 10/100 speed only */
+ hw->speed_downgraded = false;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+{
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ {IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D};
+ u16 min_length, max_length;
+
+ DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (speed == SPEED_1000) {
+
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled) &&
+ min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state = e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
+ (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
+ hw->ffe_config_state = e1000_ffe_config_active;
+
+ ret_val = e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
+
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * Set PHY to class A mode
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ *
+ * hw - Struct containing variables accessed by shared code
+ ****************************************************************************/
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisment
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * hw: Struct containing variables accessed by shared code
+ * active - true to enable lplu false to disable lplu.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+ && hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->mac_type == e1000_ich8lan) {
+ /* MAC writes into PHY register based on the state transition
+ * and start auto-negotiation. SW driver can overwrite the settings
+ * in CSR PHY power control E1000_PHY_CTRL register. */
+ phy_ctrl = er32(PHY_CTRL);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
+ (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ *
+ * This function sets the lplu d0 state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisment
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * hw: Struct containing variables accessed by shared code
+ * active - true to enable lplu false to disable lplu.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ ****************************************************************************/
+
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
+{
+ u32 phy_ctrl = 0;
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d0_lplu_state");
+
+ if (hw->mac_type <= e1000_82547_rev_2)
+ return E1000_SUCCESS;
+
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl = er32(PHY_CTRL);
+ } else {
+ ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+
+ } else {
+
+ if (hw->mac_type == e1000_ich8lan) {
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+ } else {
+ phy_data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/******************************************************************************
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_set_vco_speed");
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ /* Set PHY register 30, page 5, bit 8 to 0 */
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function reads the cookie from ARC ram.
+ *
+ * returns: - E1000_SUCCESS .
+ ****************************************************************************/
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
+{
+ u8 i;
+ u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
+
+ length = (length >> 2);
+ offset = (offset >> 2);
+
+ for (i = 0; i < length; i++) {
+ *((u32 *)buffer + i) =
+ E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
+ }
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks whether the HOST IF is enabled for command operaton
+ * and also checks whether the previous command is completed.
+ * It busy waits in case of previous command is not completed.
+ *
+ * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
+ * timeout
+ * - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+ u32 hicr;
+ u8 i;
+
+ /* Check that the host interface is enabled. */
+ hicr = er32(HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
+ DEBUGOUT("E1000_HOST_EN bit disabled.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+ hicr = er32(HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
+ mdelay(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ DEBUGOUT("Previous command timeout failed .\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ return E1000_SUCCESS;
+}
+
+/*****************************************************************************
+ * This function writes the buffer content at the offset given on the host if.
+ * It also does alignment considerations to do the writes in most efficient way.
+ * Also fills up the sum of the buffer in *buffer parameter.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+ u16 offset, u8 *sum)
+{
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
+ return -E1000_ERR_PARAM;
+ }
+
+ tmp = (u8 *)&data;
+ prev_bytes = offset & 0x3;
+ offset &= 0xFFFC;
+ offset >>= 2;
+
+ if (prev_bytes) {
+ data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
+ for (j = prev_bytes; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data);
+ length -= j - prev_bytes;
+ offset++;
+ }
+
+ remaining = length & 0x3;
+ length -= remaining;
+
+ /* Calculate length in DWORDs */
+ length >>= 2;
+
+ /* The device driver writes the relevant command block into the
+ * ram area. */
+ for (i = 0; i < length; i++) {
+ for (j = 0; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(u32); j++) {
+ if (j < remaining)
+ *(tmp + j) = *bufptr++;
+ else
+ *(tmp + j) = 0;
+
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function writes the command header after does the checksum calculation.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr)
+{
+ u16 i;
+ u8 sum;
+ u8 *buffer;
+
+ /* Write the whole command header structure which includes sum of
+ * the buffer */
+
+ u16 length = sizeof(struct e1000_host_mng_command_header);
+
+ sum = hdr->checksum;
+ hdr->checksum = 0;
+
+ buffer = (u8 *)hdr;
+ i = length;
+ while (i--)
+ sum += buffer[i];
+
+ hdr->checksum = 0 - sum;
+
+ length >>= 2;
+ /* The device driver writes the relevant command block into the ram area. */
+ for (i = 0; i < length; i++) {
+ E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i));
+ E1000_WRITE_FLUSH();
+ }
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function indicates to ARC that a new command is pending which completes
+ * one write operation by the driver.
+ *
+ * returns - E1000_SUCCESS for success.
+ ****************************************************************************/
+static s32 e1000_mng_write_commit(struct e1000_hw *hw)
+{
+ u32 hicr;
+
+ hicr = er32(HICR);
+ /* Setting this bit tells the ARC that a new command is pending. */
+ ew32(HICR, hicr | E1000_HICR_C);
+
+ return E1000_SUCCESS;
+}
+
+
+/*****************************************************************************
+ * This function checks the mode of the firmware.
+ *
+ * returns - true when the mode is IAMT or false.
+ ****************************************************************************/
+bool e1000_check_mng_mode(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ fwsm = er32(FWSM);
+
+ if (hw->mac_type == e1000_ich8lan) {
+ if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return true;
+ } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+ return true;
+
+ return false;
+}
+
+
+/*****************************************************************************
+ * This function writes the dhcp info .
+ ****************************************************************************/
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+ s32 ret_val;
+ struct e1000_host_mng_command_header hdr;
+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ hdr.reserved2 = 0;
+ hdr.checksum = 0;
+
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr),
+ &(hdr.checksum));
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val == E1000_SUCCESS)
+ ret_val = e1000_mng_write_commit(hw);
+ }
+ }
+ return ret_val;
+}
+
+
+/*****************************************************************************
+ * This function calculates the checksum.
+ *
+ * returns - checksum of buffer contents.
+ ****************************************************************************/
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
+{
+ u8 sum = 0;
+ u32 i;
+
+ if (!buffer)
+ return 0;
+
+ for (i=0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8)(0 - sum);
+}
+
+/*****************************************************************************
+ * This function checks whether tx pkt filtering needs to be enabled or not.
+ *
+ * returns - true for packet filtering or false.
+ ****************************************************************************/
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ /* called in init as well as watchdog timer functions */
+
+ s32 ret_val, checksum;
+ bool tx_filter = false;
+ struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
+ u8 *buffer = (u8 *) &(hw->mng_cookie);
+
+ if (e1000_check_mng_mode(hw)) {
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val == E1000_SUCCESS) {
+ ret_val = e1000_host_if_read_cookie(hw, buffer);
+ if (ret_val == E1000_SUCCESS) {
+ checksum = hdr->checksum;
+ hdr->checksum = 0;
+ if ((hdr->signature == E1000_IAMT_SIGNATURE) &&
+ checksum == e1000_calculate_mng_checksum((char *)buffer,
+ E1000_MNG_DHCP_COOKIE_LENGTH)) {
+ if (hdr->status &
+ E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
+ tx_filter = true;
+ } else
+ tx_filter = true;
+ } else
+ tx_filter = true;
+ }
+ }
+
+ hw->tx_pkt_filtering = tx_filter;
+ return tx_filter;
+}
+
+/******************************************************************************
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - true/false
+ *
+ *****************************************************************************/
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if (e1000_arc_subsystem_valid(hw)) {
+ fwsm = er32(FWSM);
+ factps = er32(FACTPS);
+
+ if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
+ e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
+ return true;
+ } else
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
+}
+
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
+
+ /* Polarity reversal workaround for forced 10F/10H links. */
+
+ /* Disable the transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
+ mdelay(100);
+ }
+
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS) break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Disables PCI-Express master access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - none.
+ *
+ ***************************************************************************/
+static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_set_pci_express_master_disable");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ ew32(CTRL, ctrl);
+}
+
+/*******************************************************************************
+ *
+ * Disables PCI-Express master access and verifies there are no pending requests
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't
+ * caused the master requests to be disabled.
+ * E1000_SUCCESS master requests disabled.
+ *
+ ******************************************************************************/
+s32 e1000_disable_pciex_master(struct e1000_hw *hw)
+{
+ s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+
+ DEBUGFUNC("e1000_disable_pciex_master");
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ e1000_set_pci_express_master_disable(hw);
+
+ while (timeout) {
+ if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ else
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Master requests are pending.\n");
+ return -E1000_ERR_MASTER_REQUESTS_PENDING;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/*******************************************************************************
+ *
+ * Check for EEPROM Auto Read bit done.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ******************************************************************************/
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 timeout = AUTO_READ_DONE_TIMEOUT;
+
+ DEBUGFUNC("e1000_get_auto_rd_done");
+
+ switch (hw->mac_type) {
+ default:
+ msleep(5);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ while (timeout) {
+ if (er32(EECD) & E1000_EECD_AUTO_RD)
+ break;
+ else msleep(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
+
+ /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
+ * Need to wait for PHY configuration completion before accessing NVM
+ * and PHY. */
+ if (hw->mac_type == e1000_82573)
+ msleep(25);
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * Checks if the PHY configuration is done
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 cfg_mask = E1000_EEPROM_CFG_DONE;
+
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+
+ switch (hw->mac_type) {
+ default:
+ mdelay(10);
+ break;
+ case e1000_80003es2lan:
+ /* Separate *_CFG_DONE_* bit for each port */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
+ /* Fall Through */
+ case e1000_82571:
+ case e1000_82572:
+ while (timeout) {
+ if (er32(EEMNGCTL) & cfg_mask)
+ break;
+ else
+ msleep(1);
+ timeout--;
+ }
+ if (!timeout) {
+ DEBUGOUT("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Using the combination of SMBI and SWESMBI semaphore bits when resetting
+ * adapter or Eeprom access.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_EEPROM if fail to access EEPROM.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ s32 timeout;
+ u32 swsm;
+
+ DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
+
+ if (!hw->eeprom_semaphore_present)
+ return E1000_SUCCESS;
+
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Get the SW semaphore. */
+ if (e1000_get_software_semaphore(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Get the FW semaphore. */
+ timeout = hw->eeprom.word_size + 1;
+ while (timeout) {
+ swsm = er32(SWSM);
+ swsm |= E1000_SWSM_SWESMBI;
+ ew32(SWSM, swsm);
+ /* if we managed to set the bit we got the semaphore. */
+ swsm = er32(SWSM);
+ if (swsm & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ timeout--;
+ }
+
+ if (!timeout) {
+ /* Release semaphores */
+ e1000_put_hw_eeprom_semaphore(hw);
+ DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ * This function clears HW semaphore bits.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - None.
+ *
+ ***************************************************************************/
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
+
+ if (!hw->eeprom_semaphore_present)
+ return;
+
+ swsm = er32(SWSM);
+ if (hw->mac_type == e1000_80003es2lan) {
+ /* Release both semaphores. */
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ } else
+ swsm &= ~(E1000_SWSM_SWESMBI);
+ ew32(SWSM, swsm);
+}
+
+/***************************************************************************
+ *
+ * Obtaining software semaphore bit (SMBI) before resetting PHY.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_ERR_RESET if fail to obtain semaphore.
+ * E1000_SUCCESS at any other case.
+ *
+ ***************************************************************************/
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
+{
+ s32 timeout = hw->eeprom.word_size + 1;
+ u32 swsm;
+
+ DEBUGFUNC("e1000_get_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan) {
+ return E1000_SUCCESS;
+ }
+
+ while (timeout) {
+ swsm = er32(SWSM);
+ /* If SMBI bit cleared, it is now set and we hold the semaphore */
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release semaphore bit (SMBI).
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static void e1000_release_software_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("e1000_release_software_semaphore");
+
+ if (hw->mac_type != e1000_80003es2lan) {
+ return;
+ }
+
+ swsm = er32(SWSM);
+ /* Release the SW semaphores.*/
+ swsm &= ~E1000_SWSM_SMBI;
+ ew32(SWSM, swsm);
+}
+
+/******************************************************************************
+ * Checks if PHY reset is blocked due to SOL/IDER session, for example.
+ * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to
+ * the caller to figure out how to deal with it.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * returns: - E1000_BLK_PHY_RESET
+ * E1000_SUCCESS
+ *
+ *****************************************************************************/
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
+{
+ u32 manc = 0;
+ u32 fwsm = 0;
+
+ if (hw->mac_type == e1000_ich8lan) {
+ fwsm = er32(FWSM);
+ return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+ : E1000_BLK_PHY_RESET;
+ }
+
+ if (hw->mac_type > e1000_82547_rev_2)
+ manc = er32(MANC);
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : E1000_SUCCESS;
+}
+
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
+ * may not be provided a DMA clock when no manageability features are
+ * enabled. We do not want to perform any reads/writes to these registers
+ * if this is the case. We read FWSM to determine the manageability mode.
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ fwsm = er32(FWSM);
+ if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
+ return true;
+ break;
+ case e1000_ich8lan:
+ return true;
+ default:
+ break;
+ }
+ return false;
+}
+
+
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+{
+ u32 gcr_reg = 0;
+
+ DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+
+ if (hw->bus_type == e1000_bus_type_unknown)
+ e1000_get_bus_info(hw);
+
+ if (hw->bus_type != e1000_bus_type_pci_express)
+ return E1000_SUCCESS;
+
+ if (no_snoop) {
+ gcr_reg = er32(GCR);
+ gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+ gcr_reg |= no_snoop;
+ ew32(GCR, gcr_reg);
+ }
+ if (hw->mac_type == e1000_ich8lan) {
+ u32 ctrl_ext;
+
+ ew32(GCR, PCI_EX_82566_SNOOP_ALL);
+
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static s32 e1000_get_software_flag(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl;
+
+ DEBUGFUNC("e1000_get_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ DEBUGOUT("FW or HW locks the resource too long.\n");
+ return -E1000_ERR_CONFIG;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+static void e1000_release_software_flag(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+
+ DEBUGFUNC("e1000_release_software_flag");
+
+ if (hw->mac_type == e1000_ich8lan) {
+ extcnf_ctrl= er32(EXTCNF_CTRL);
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 error = E1000_SUCCESS;
+ u32 flash_bank = 0;
+ u32 act_offset = 0;
+ u32 bank_offset = 0;
+ u16 word = 0;
+ u16 i = 0;
+
+ /* We need to know which is the valid flash bank. In the event
+ * that we didn't allocate eeprom_shadow_ram, we may not be
+ * managing flash_bank. So it cannot be trusted and needs
+ * to be updated with each read.
+ */
+ /* Value of bit 22 corresponds to the flash bank we're on. */
+ flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+
+ /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+ bank_offset = flash_bank * (hw->flash_bank_size * 2);
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ for (i = 0; i < words; i++) {
+ if (hw->eeprom_shadow_ram != NULL &&
+ hw->eeprom_shadow_ram[offset+i].modified) {
+ data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+ } else {
+ /* The NVM part needs a byte offset, hence * 2 */
+ act_offset = bank_offset + ((offset + i) * 2);
+ error = e1000_read_ich8_word(hw, act_offset, &word);
+ if (error != E1000_SUCCESS)
+ break;
+ data[i] = word;
+ }
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register. Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ u32 i = 0;
+ s32 error = E1000_SUCCESS;
+
+ error = e1000_get_software_flag(hw);
+ if (error != E1000_SUCCESS)
+ return error;
+
+ /* A driver can write to the NVM only if it has eeprom_shadow_ram
+ * allocated. Subsequent reads to the modified words are read from
+ * this cached structure as well. Writes will only go into this
+ * cached structure unless it's followed by a call to
+ * e1000_update_eeprom_checksum() where it will commit the changes
+ * and clear the "modified" field.
+ */
+ if (hw->eeprom_shadow_ram != NULL) {
+ for (i = 0; i < words; i++) {
+ if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+ hw->eeprom_shadow_ram[offset+i].modified = true;
+ hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+ } else {
+ error = -E1000_ERR_EEPROM;
+ break;
+ }
+ }
+ } else {
+ /* Drivers have the option to not allocate eeprom_shadow_ram as long
+ * as they don't perform any NVM writes. An attempt in doing so
+ * will result in this error.
+ */
+ error = -E1000_ERR_EEPROM;
+ }
+
+ e1000_release_software_flag(hw);
+
+ return error;
+}
+
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+ union ich8_hws_flash_status hsfsts;
+ s32 error = E1000_ERR_EEPROM;
+ s32 i = 0;
+
+ DEBUGFUNC("e1000_ich8_cycle_init");
+
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+
+ /* May be check the Flash Des Valid bit in Hw status */
+ if (hsfsts.hsf_status.fldesvalid == 0) {
+ DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.");
+ return error;
+ }
+
+ /* Clear FCERR in Hw status by writing 1 */
+ /* Clear DAEL in Hw status by writing a 1 */
+ hsfsts.hsf_status.flcerr = 1;
+ hsfsts.hsf_status.dael = 1;
+
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+
+ /* Either we should have a hardware SPI cycle in progress bit to check
+ * against, in order to start a new cycle or FDONE bit should be changed
+ * in the hardware so that it is 1 after harware reset, which can then be
+ * used as an indication whether a cycle is in progress or has been
+ * completed .. we should also have some software semaphore mechanism to
+ * guard FDONE or the cycle in progress bit so that two threads access to
+ * those bits can be sequentiallized or a way so that 2 threads dont
+ * start the cycle at the same time */
+
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ /* There is no cycle running at present, so we can start a cycle */
+ /* Begin by setting Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+ error = E1000_SUCCESS;
+ } else {
+ /* otherwise poll for sometime so the current cycle has a chance
+ * to end before giving up. */
+ for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ error = E1000_SUCCESS;
+ break;
+ }
+ udelay(1);
+ }
+ if (error == E1000_SUCCESS) {
+ /* Successful in waiting for previous cycle to timeout,
+ * now set the Flash Cycle Done. */
+ hsfsts.hsf_status.flcdone = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
+ } else {
+ DEBUGOUT("Flash controller busy, cannot get access");
+ }
+ }
+ return error;
+}
+
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
+{
+ union ich8_hws_flash_ctrl hsflctl;
+ union ich8_hws_flash_status hsfsts;
+ s32 error = E1000_ERR_EEPROM;
+ u32 i = 0;
+
+ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcgo = 1;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* wait till FDONE bit is set to 1 */
+ do {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcdone == 1)
+ break;
+ udelay(1);
+ i++;
+ } while (i < timeout);
+ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+ error = E1000_SUCCESS;
+ }
+ return error;
+}
+
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 *data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
+
+ DEBUGFUNC("e1000_read_ich8_data");
+
+ if (size < 1 || size > 2 || data == NULL ||
+ index > ICH_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ /* TODO: TBD maybe check the index against the size of flash */
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
+
+ /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+ * sequence a few more times, else read in (shift in) the Flash Data0,
+ * the order is least significant byte first msb to lsb */
+ if (error == E1000_SUCCESS) {
+ flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
+ if (size == 1) {
+ *data = (u8)(flash_data & 0x000000FF);
+ } else if (size == 2) {
+ *data = (u16)(flash_data & 0x0000FFFF);
+ }
+ break;
+ } else {
+ /* If we've gotten here, then things are probably completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+ u16 data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ u32 flash_data = 0;
+ s32 error = -E1000_ERR_EEPROM;
+ s32 count = 0;
+
+ DEBUGFUNC("e1000_write_ich8_data");
+
+ if (size < 1 || size > 2 || data > size * 0xff ||
+ index > ICH_FLASH_LINEAR_ADDR_MASK)
+ return error;
+
+ flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
+ hw->flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS)
+ break;
+
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of index into Flash Linear address field in
+ * Flash Address */
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ if (size == 1)
+ flash_data = (u32)data & 0x00FF;
+ else
+ flash_data = (u32)data;
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
+
+ /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+ * sequence a few more times else done */
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ /* If we're here, then things are most likely completely hosed,
+ * but if the error condition is detected, it won't hurt to give
+ * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ DEBUGOUT("Timeout error - flash cycle did not complete.");
+ break;
+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return error;
+}
+
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 word = 0;
+
+ status = e1000_read_ich8_data(hw, index, 1, &word);
+ if (status == E1000_SUCCESS) {
+ *data = (u8)word;
+ }
+
+ return status;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
+{
+ s32 error = E1000_SUCCESS;
+ s32 program_retries = 0;
+
+ DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
+
+ error = e1000_write_ich8_byte(hw, index, byte);
+
+ if (error != E1000_SUCCESS) {
+ for (program_retries = 0; program_retries < 100; program_retries++) {
+ DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index);
+ error = e1000_write_ich8_byte(hw, index, byte);
+ udelay(100);
+ if (error == E1000_SUCCESS)
+ break;
+ }
+ }
+
+ if (program_retries == 100)
+ error = E1000_ERR_EEPROM;
+
+ return error;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 word = (u16)data;
+
+ status = e1000_write_ich8_data(hw, index, 1, word);
+
+ return status;
+}
+
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
+{
+ s32 status = E1000_SUCCESS;
+ status = e1000_read_ich8_data(hw, index, 2, data);
+ return status;
+}
+
+/******************************************************************************
+ * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0
+ * based.
+ *
+ * hw - pointer to e1000_hw structure
+ * bank - 0 for first bank, 1 for second bank
+ *
+ * Note that this function may actually erase as much as 8 or 64 KBytes. The
+ * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
+ * bank size may be 4, 8 or 64 KBytes
+ *****************************************************************************/
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_address;
+ s32 count = 0;
+ s32 error = E1000_ERR_EEPROM;
+ s32 iteration;
+ s32 sub_sector_size = 0;
+ s32 bank_size;
+ s32 j = 0;
+ s32 error_flag = 0;
+
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+
+ /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+ /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+ * consecutive sectors. The start index for the nth Hw sector can be
+ * calculated as bank * 4096 + n * 256
+ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+ * The start index for the nth Hw sector can be calculated
+ * as bank * 4096
+ * 10: The HW sector is 8K bytes
+ * 11: The Hw sector size is 64K bytes */
+ if (hsfsts.hsf_status.berasesz == 0x0) {
+ /* Hw sector size 256 */
+ sub_sector_size = ICH_FLASH_SEG_SIZE_256;
+ bank_size = ICH_FLASH_SECTOR_SIZE;
+ iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256;
+ } else if (hsfsts.hsf_status.berasesz == 0x1) {
+ bank_size = ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
+ } else if (hsfsts.hsf_status.berasesz == 0x3) {
+ bank_size = ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
+ } else {
+ return error;
+ }
+
+ for (j = 0; j < iteration ; j++) {
+ do {
+ count++;
+ /* Steps */
+ error = e1000_ich8_cycle_init(hw);
+ if (error != E1000_SUCCESS) {
+ error_flag = 1;
+ break;
+ }
+
+ /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+ * Control */
+ hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+ E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* Write the last 24 bits of an index within the block into Flash
+ * Linear address field in Flash Address. This probably needs to
+ * be calculated here based off the on-chip erase sector size and
+ * the software bank size (4, 8 or 64 KBytes) */
+ flash_linear_address = bank * bank_size + j * sub_sector_size;
+ flash_linear_address += hw->flash_base_addr;
+ flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK;
+
+ E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
+
+ error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT);
+ /* Check if FCERR is set to 1. If 1, clear it and try the whole
+ * sequence a few more times else Done */
+ if (error == E1000_SUCCESS) {
+ break;
+ } else {
+ hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* repeat for some time before giving up */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ error_flag = 1;
+ break;
+ }
+ }
+ } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+ if (error_flag == 1)
+ break;
+ }
+ if (error_flag != 1)
+ error = E1000_SUCCESS;
+ return error;
+}
+
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+ u32 cnf_base_addr,
+ u32 cnf_size)
+{
+ u32 ret_val = E1000_SUCCESS;
+ u16 word_addr, reg_data, reg_addr;
+ u16 i;
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
+
+ /* cnf_size is returned in size of dwords */
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_get_software_flag(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
+
+ e1000_release_software_flag(hw);
+ }
+
+ return ret_val;
+}
+
+
+/******************************************************************************
+ * This function initializes the PHY from the NVM on ICH8 platforms. This
+ * is needed due to an issue where the NVM configuration is not properly
+ * autoloaded after power transitions. Therefore, after each PHY reset, we
+ * will load the configuration data out of the NVM manually.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *****************************************************************************/
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+ u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+
+ if (hw->phy_type != e1000_phy_igp_3)
+ return E1000_SUCCESS;
+
+ /* Check if SW needs configure the PHY */
+ reg_data = er32(FEXTNVM);
+ if (!(reg_data & FEXTNVM_SW_CONFIG))
+ return E1000_SUCCESS;
+
+ /* Wait for basic configuration completes before proceeding*/
+ loop = 0;
+ do {
+ reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ loop++;
+ } while ((!reg_data) && (loop < 50));
+
+ /* Clear the Init Done bit for the next init event */
+ reg_data = er32(STATUS);
+ reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, reg_data);
+
+ /* Make sure HW does not configure LCD from PHY extended configuration
+ before SW configuration */
+ reg_data = er32(EXTCNF_CTRL);
+ if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+ reg_data = er32(EXTCNF_SIZE);
+ cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+ cnf_size >>= 16;
+ if (cnf_size) {
+ reg_data = er32(EXTCNF_CTRL);
+ cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+ /* cnf_base_addr is in DWORD */
+ cnf_base_addr >>= 16;
+
+ /* Configure LCD from extended configuration region. */
+ ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+ cnf_size);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.31-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3406 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep.h"
+
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controlers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_82571,
+ e1000_82572,
+ e1000_82573,
+ e1000_80003es2lan,
+ e1000_ich8lan,
+ e1000_num_macs
+} e1000_mac_type;
+
+typedef enum {
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_ich8,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
+} e1000_eeprom_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+/* Flow Control Settings */
+typedef enum {
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
+} e1000_fc_type;
+
+struct e1000_shadow_ram {
+ u16 eeprom_word;
+ bool modified;
+};
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ /* These PCIe values should literally match the possible return values
+ * from config space */
+ e1000_bus_width_pciex_1 = 1,
+ e1000_bus_width_pciex_2 = 2,
+ e1000_bus_width_pciex_4 = 4,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
+} e1000_igp_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
+} e1000_downshift;
+
+typedef enum {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+} e1000_smart_speed;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+typedef enum {
+ e1000_phy_m88 = 0,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_undefined = 0xFF
+} e1000_phy_type;
+
+typedef enum {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+} e1000_ms_type;
+
+typedef enum {
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
+} e1000_ffe_config;
+
+typedef enum {
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
+} e1000_dsp_config;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_eeprom_info {
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+ bool use_eerd;
+ bool use_eewr;
+};
+
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
+
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+
+#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
+ (((_value) & 0xff00) >> 8))
+
+/* Function prototypes */
+/* Initialization */
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+void e1000_set_media_type(struct e1000_hw *hw);
+
+/* Link Configuration */
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+
+/* PHY */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+
+/* EEPROM Functions */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
+
+/* MNG HOST IF functions */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie{
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie{
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+#endif
+
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_read_mac_addr(struct e1000_hw * hw);
+
+/* Filters (multicast, vlan, receive) */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+/* LED functions */
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
+
+/* Adaptive IFS Functions */
+
+/* Everything else */
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr);
+void e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_pci_set_mwi(struct e1000_hw *hw);
+void e1000_pci_clear_mwi(struct e1000_hw *hw);
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
+/* Port I/O is only supported on 82544 and newer */
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+s32 e1000_disable_pciex_master(struct e1000_hw *hw);
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
+
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82540EP_LOM 0x1016
+#define E1000_DEV_ID_82540EP 0x1017
+#define E1000_DEV_ID_82540EP_LP 0x101E
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
+#define E1000_DEV_ID_82545GM_FIBER 0x1027
+#define E1000_DEV_ID_82545GM_SERDES 0x1028
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
+#define E1000_DEV_ID_82541EI 0x1013
+#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
+#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82547GI 0x1075
+#define E1000_DEV_ID_82541GI 0x1076
+#define E1000_DEV_ID_82541GI_MOBILE 0x1077
+#define E1000_DEV_ID_82541GI_LF 0x107C
+#define E1000_DEV_ID_82546GB_COPPER 0x1079
+#define E1000_DEV_ID_82546GB_FIBER 0x107A
+#define E1000_DEV_ID_82546GB_SERDES 0x107B
+#define E1000_DEV_ID_82546GB_PCIE 0x108A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
+#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
+#define E1000_DEV_ID_82571EB_COPPER 0x105E
+#define E1000_DEV_ID_82571EB_FIBER 0x105F
+#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
+#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
+#define E1000_DEV_ID_82572EI_COPPER 0x107D
+#define E1000_DEV_ID_82572EI_FIBER 0x107E
+#define E1000_DEV_ID_82572EI_SERDES 0x107F
+#define E1000_DEV_ID_82572EI 0x10B9
+#define E1000_DEV_ID_82573E 0x108B
+#define E1000_DEV_ID_82573E_IAMT 0x108C
+#define E1000_DEV_ID_82573L 0x109A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
+
+#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
+#define E1000_DEV_ID_ICH8_IGP_C 0x104B
+#define E1000_DEV_ID_ICH8_IFE 0x104C
+#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
+#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
+#define E1000_DEV_ID_ICH8_IGP_M 0x104D
+
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MAXIMUM_ETHERNET_PACKET_SIZE \
+ (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Additional interrupts need to be handled for e1000_ich8lan:
+ DSW = The FW changed the status of the DISSW bit in FWSM
+ PHYINT = The LAN connected device generates an interrupt
+ EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+ E1000_IMS_DSW | \
+ E1000_IMS_PHYINT | \
+ E1000_IMS_EPRST)
+
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+
+#define E1000_RAR_ENTRIES_ICH8LAN 6
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Decriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+#define E1000_NUM_UNICAST_ICH8LAN 7
+#define E1000_MC_TBL_SIZE_ICH8LAN 32
+
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
+};
+
+/* Number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN 3
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile u8 ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Inteface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_FLA E1000_FLA
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
+#define E1000_82542_ERT E1000_ERT
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
+#define E1000_82542_TDFHS E1000_TDFHS
+#define E1000_82542_TDFTS E1000_TDFTS
+#define E1000_82542_TDFPC E1000_TDFPC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_TDFH 0x08010
+#define E1000_82542_TDFT 0x08018
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
+
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+#define E1000_82542_MANC2H E1000_MANC2H
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ u32 swfw_sync_present;
+ u32 swfwhw_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_link_down;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool kmrn_lock_loss_workaround_disabled;
+ bool bad_tx_carr_stats_fd;
+ bool has_manc2h;
+ bool rx_needs_kicking;
+ bool has_smbus;
+};
+
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#ifndef E1000_EEPROM_GRANT_ATTEMPTS
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
+
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC0
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* SPI EEPROM Status Register */
+#define EEPROM_STATUS_RDY_SPI 0x01
+#define EEPROM_STATUS_WEN_SPI 0x02
+#define EEPROM_STATUS_BP0_SPI 0x04
+#define EEPROM_STATUS_BP1_SPI 0x08
+#define EEPROM_STATUS_WPEN_SPI 0x80
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Inteface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* PCI-Ex registers*/
+
+/* PCI-Ex Control Register */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
+/* PCI-Ex Config Space */
+#define PCI_EX_LINK_STATUS 0x12
+#define PCI_EX_LINK_WIDTH_MASK 0x3F0
+#define PCI_EX_LINK_WIDTH_SHIFT 4
+
+/* EEPROM Commands - Microwire */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */
+
+/* EEPROM Commands - SPI */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Size definitions */
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
+#define EEPROM_SIZE_MASK 0x1C00
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_PHY_CLASS_WORD 0x0007
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
+#define EEPROM_CFG 0x0012
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573 0xF746
+#define ID_LED_DEFAULT_82573 0x1811
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_OFF2 << 8) | \
+ (ID_LED_DEF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+
+/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
+#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
+
+/* Mask bit for PHY class in Word 7 of the EEPROM */
+#define EEPROM_PHY_CLASS_A 0x8000
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
+
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+#define EEPROM_RESERVED_WORD 0xFFFF
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLLISION_DISTANCE_82542 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLD_SHIFT 12
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
+#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+
+/* Number of bits required to shift right the "pause" bits from the
+ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
+ */
+#define PAUSE_SHIFT 5
+
+/* Number of bits required to shift left the "SWDPIO" bits from the
+ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
+ */
+#define SWDPIO_SHIFT 17
+
+/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
+ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* Number of bits required to shift left the "ILOS" bit from the EEPROM
+ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
+ */
+#define ILOS_SHIFT 3
+
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* Number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = true;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = false;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+
+/* IGP01E1000 AGC Registers - stores the cable length values*/
+#define IGP01E1000_PHY_AGC_A 0x1172
+#define IGP01E1000_PHY_AGC_B 0x1272
+#define IGP01E1000_PHY_AGC_C 0x1472
+#define IGP01E1000_PHY_AGC_D 0x1872
+
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+/* IGP01E1000 DSP Reset Register */
+#define IGP01E1000_PHY_DSP_RESET 0x1F33
+#define IGP01E1000_PHY_DSP_SET 0x1F71
+#define IGP01E1000_PHY_DSP_FFE 0x1F35
+
+#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
+#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
+#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
+#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
+#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
+
+#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
+#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
+
+#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
+#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
+#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
+#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
+
+#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
+/* IGP01E1000 PCS Initialization register - stores the polarity status when
+ * speed = 1000 Mbps. */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
+
+#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
+ (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG 30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL \
+ GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_SPEC_STATUS \
+ GG82563_REG(0, 17) /* PHY Specific Status */
+#define GG82563_PHY_INT_ENABLE \
+ GG82563_REG(0, 18) /* Interrupt Enable */
+#define GG82563_PHY_SPEC_STATUS_2 \
+ GG82563_REG(0, 19) /* PHY Specific Status 2 */
+#define GG82563_PHY_RX_ERR_CNTR \
+ GG82563_REG(0, 21) /* Receive Error Counter */
+#define GG82563_PHY_PAGE_SELECT \
+ GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 \
+ GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT \
+ GG82563_REG(0, 29) /* Alternate Page Select */
+#define GG82563_PHY_TEST_CLK_CTRL \
+ GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
+
+#define GG82563_PHY_MAC_SPEC_CTRL \
+ GG82563_REG(2, 21) /* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL_2 \
+ GG82563_REG(2, 26) /* MAC Specific Control 2 */
+
+#define GG82563_PHY_DSP_DISTANCE \
+ GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL \
+ GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PORT_RESET \
+ GG82563_REG(193, 17) /* Port Reset */
+#define GG82563_PHY_REVISION_ID \
+ GG82563_REG(193, 18) /* Revision ID */
+#define GG82563_PHY_DEVICE_ID \
+ GG82563_REG(193, 19) /* Device ID */
+#define GG82563_PHY_PWR_MGMT_CTRL \
+ GG82563_REG(193, 20) /* Power Management Control */
+#define GG82563_PHY_RATE_ADAPT_CTRL \
+ GG82563_REG(193, 25) /* Rate Adaptation Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
+ GG82563_REG(194, 16) /* FIFO's Control/Status */
+#define GG82563_PHY_KMRN_CTRL \
+ GG82563_REG(194, 17) /* Control */
+#define GG82563_PHY_INBAND_CTRL \
+ GG82563_REG(194, 18) /* Inband Control */
+#define GG82563_PHY_KMRN_DIAGNOSTIC \
+ GG82563_REG(194, 19) /* Diagnostic */
+#define GG82563_PHY_ACK_TIMEOUTS \
+ GG82563_REG(194, 20) /* Acknowledge Timeouts */
+#define GG82563_PHY_ADV_ABILITY \
+ GG82563_REG(194, 21) /* Advertised Ability */
+#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
+ GG82563_REG(194, 23) /* Link Partner Advertised Ability */
+#define GG82563_PHY_ADV_NEXT_PAGE \
+ GG82563_REG(194, 24) /* Advertised Next Page */
+#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
+ GG82563_REG(194, 25) /* Link Partner Advertised Next page */
+#define GG82563_PHY_KMRN_MISC \
+ GG82563_REG(194, 26) /* Misc. */
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/* IGP01E1000 Specific Port Config Register - R/W */
+#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
+#define IGP01E1000_PSCFR_PRE_EN 0x0020
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
+#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
+#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
+
+/* IGP01E1000 Specific Port Status Register - R/O */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
+#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
+#define IGP01E1000_PSSR_LINK_UP 0x0400
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
+#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+
+/* IGP01E1000 Specific Port Control Register - R/W */
+#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
+#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
+#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
+#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+
+/* IGP01E1000 Specific Port Link Health Register */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
+#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
+#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
+#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
+#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
+#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
+#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
+#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
+#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
+
+/* IGP01E1000 Channel Quality Register */
+#define IGP01E1000_MSE_CHANNEL_D 0x000F
+#define IGP01E1000_MSE_CHANNEL_C 0x00F0
+#define IGP01E1000_MSE_CHANNEL_B 0x0F00
+#define IGP01E1000_MSE_CHANNEL_A 0xF000
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
+/* IGP01E1000 DSP reset macros */
+#define DSP_RESET_ENABLE 0x0
+#define DSP_RESET_DISABLE 0x2
+#define E1000_MAX_DSP_RESETS 10
+
+/* IGP01E1000 & IGP02E1000 AGC Registers */
+
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+
+/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
+#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
+
+/* The precision error of the cable length is +/- 10 meters */
+#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
+
+/* IGP01E1000 PCS Initialization register */
+/* bits 3:6 in the PCS registers stores the channels polarity */
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+/* IGP01E1000 GMII FIFO Register */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+
+/* IGP01E1000 Analog Register */
+#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
+#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
+#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
+#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
+
+#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
+#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
+#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
+#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
+#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
+
+#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
+#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
+#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
+#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */
+#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */
+#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */
+#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */
+#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300
+#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */
+#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */
+#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */
+#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */
+#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000
+#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12
+
+/* PHY Specific Status Register (Page 0, Register 17) */
+#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */
+#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */
+#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */
+#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */
+#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */
+#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */
+#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */
+#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */
+#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
+#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */
+#define GG82563_PSSR_SPEED_MASK 0xC000
+#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */
+#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */
+#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */
+
+/* PHY Specific Status Register 2 (Page 0, Register 19) */
+#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */
+#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */
+#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
+#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
+#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
+#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
+#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
+#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
+#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */
+#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */
+#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */
+#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */
+#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C
+#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */
+#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */
+#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */
+#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */
+#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK 0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006
+#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26) */
+#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
+ 1 = 50-80M;
+ 2 = 80-110M;
+ 3 = 110-140M;
+ 4 = >140M */
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
+#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */
+#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400
+#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */
+#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+
+/* Power Management Control Register (Page 193, Register 20) */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */
+#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */
+#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */
+#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */
+#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
+#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
+#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
+#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */
+#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */
+
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88_VENDOR 0x0141
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define L1LXT971A_PHY_ID 0x001378E0
+#define GG82563_E_PHY_ID 0x01410CA0
+
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define ICH_CYCLE_READ 0x0
+#define ICH_CYCLE_RESERVED 0x1
+#define ICH_CYCLE_WRITE 0x2
+#define ICH_CYCLE_ERASE 0x3
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_FRACC 0x0050
+#define ICH_FLASH_FREG0 0x0054
+#define ICH_FLASH_FREG1 0x0058
+#define ICH_FLASH_FREG2 0x005C
+#define ICH_FLASH_FREG3 0x0060
+#define ICH_FLASH_FPR0 0x0074
+#define ICH_FLASH_FPR1 0x0078
+#define ICH_FLASH_SSFSTS 0x0090
+#define ICH_FLASH_SSFCTL 0x0092
+#define ICH_FLASH_PREOP 0x0094
+#define ICH_FLASH_OPTYPE 0x0096
+#define ICH_FLASH_OPMENU 0x0098
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+#define ICH_FLASH_SECTOR_SIZE 4096
+#define ICH_GFPREG_BASE_MASK 0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+ struct ich8_hsfsts {
+#ifdef __BIG_ENDIAN
+ u16 reserved2 :6;
+ u16 fldesvalid :1;
+ u16 flockdn :1;
+ u16 flcdone :1;
+ u16 flcerr :1;
+ u16 dael :1;
+ u16 berasesz :2;
+ u16 flcinprog :1;
+ u16 reserved1 :2;
+#else
+ u16 flcdone :1; /* bit 0 Flash Cycle Done */
+ u16 flcerr :1; /* bit 1 Flash Cycle Error */
+ u16 dael :1; /* bit 2 Direct Access error Log */
+ u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */
+ u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */
+ u16 reserved1 :2; /* bit 13:6 Reserved */
+ u16 reserved2 :6; /* bit 13:6 Reserved */
+ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */
+#endif
+ } hsf_status;
+ u16 regval;
+};
+
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+ struct ich8_hsflctl {
+#ifdef __BIG_ENDIAN
+ u16 fldbcount :2;
+ u16 flockdn :6;
+ u16 flcgo :1;
+ u16 flcycle :2;
+ u16 reserved :5;
+#else
+ u16 flcgo :1; /* 0 Flash Cycle Go */
+ u16 flcycle :2; /* 2:1 Flash Cycle */
+ u16 reserved :5; /* 7:3 Reserved */
+ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn :6; /* 15:10 Reserved */
+#endif
+ } hsf_ctrl;
+ u16 regval;
+};
+
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+ struct ich8_flracc {
+#ifdef __BIG_ENDIAN
+ u32 gmwag :8;
+ u32 gmrag :8;
+ u32 grwa :8;
+ u32 grra :8;
+#else
+ u32 grra :8; /* 0:7 GbE region Read Access */
+ u32 grwa :8; /* 8:15 GbE region Write Access */
+ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+#endif
+ } hsf_flregacc;
+ u16 regval;
+};
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/
+
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,5634 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ */
+
+/* e1000_hw.c
+ * Shared functions for accessing and configuring the MAC
+ */
+
+#include "e1000_hw-2.6.33-ethercat.h"
+
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity);
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
+static void e1000_clear_vfta(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
+static void e1000_phy_init_script(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
+static void e1000_release_eeprom(struct e1000_hw *hw);
+static void e1000_standby_eeprom(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+
+/* IGP cable length table */
+static const
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
+ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
+ 120, 120
+};
+
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
+/**
+ * e1000_set_phy_type - Set the phy type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_phy_type");
+
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ hw->phy_type = e1000_phy_igp;
+ break;
+ }
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ DEBUGFUNC("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+ msleep(20);
+
+ e1000_write_phy_reg(hw, 0x0000, 0x0140);
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
+
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
+
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
+ &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_STATUS,
+ &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse =
+ fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse >
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -=
+ IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse ==
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused =
+ (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse &
+ IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_CONTROL,
+ fused);
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
+}
+
+/**
+ * e1000_set_mac_type - Set the mac type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = true;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = true;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_media_type - Set media type and TBI compatibility.
+ * @hw: Struct containing variables accessed by shared code
+ */
+void e1000_set_media_type(struct e1000_hw *hw)
+{
+ u32 status;
+
+ DEBUGFUNC("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
+}
+
+/**
+ * e1000_reset_hw: reset the hardware completely
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ */
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ msleep(5);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_hw: Performs basic configuration of the adapter.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ */
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 ctrl_ext;
+
+ DEBUGFUNC("e1000_init_hw");
+
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occurring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix
+ && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl =
+ (ctrl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
+ * @hw: Struct containing variables accessed by shared code.
+ */
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+{
+ u16 eeprom_data;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_adjust_serdes_amplitude");
+
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_link - Configures flow control and link settings.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the appropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_setup_link");
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
+
+ hw->original_fc = hw->fc;
+
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT
+ ("Initializing the Flow Control address, type and timer regs\n");
+
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ */
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_setup_fiber_serdes_link");
+
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-negotiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled\n");
+
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ hw->txcw = txcw;
+ msleep(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_preconfig - early configuration for copper
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Make sure we have a valid PHY and change PHY mode before link setup.
+ */
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_preconfig");
+
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |=
+ (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
+
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_igp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &=
+ ~(IGP01E1000_PSCR_AUTO_MDIX |
+ IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val =
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_autoneg - setup auto-neg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Setup auto-negotiation and flow control advertisements,
+ * and then perform auto-negotiation.
+ */
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->get_link_status = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_postconfig - post link setup
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Config the MAC and the PHY after link is up.
+ * 1) Set up the MAC to the current PHY speed/duplex
+ * if we are on 82543. If we
+ * are on newer silicon, we only need to configure
+ * collision distance in the Transmit Control Register.
+ * 2) Set up flow control on the MAC to that established with
+ * the link partner.
+ * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+ */
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
+
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_copper_link - phy/speed/duplex setting
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Detects which PHY is present and sets up the speed and duplex
+ */
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
+
+ DEBUGOUT("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_setup_autoneg - phy settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures PHY autoneg and flow control advertisement settings
+ */
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ DEBUGFUNC("e1000_phy_setup_autoneg");
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT
+ ("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_force_speed_duplex - force link settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Force PHY speed and duplex settings to hw->forced_speed_duplex
+ */
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
+
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ DEBUGOUT("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ DEBUGOUT("Forcing 10mb ");
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if (hw->phy_type == e1000_phy_m88) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ }
+ if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
+ && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_collision_dist - set collision distance register
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets the collision distance in the Transmit Control register.
+ * Link should have been established previously. Reads the speed and duplex
+ * information from the Device Status register.
+ */
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
+
+ DEBUGFUNC("e1000_config_collision_dist");
+
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_config_mac_to_phy - sync phy and mac settings
+ * @hw: Struct containing variables accessed by shared code
+ * @mii_reg: data to write to the MII control register
+ *
+ * Sets MAC speed and duplex settings to reflect the those in the PHY
+ * The contents of the PHY register containing the needed information need to
+ * be passed in.
+ */
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_config_mac_to_phy");
+
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_force_mac_fc - force flow control settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Forces the MAC's flow control settings.
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ */
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_fc_after_link_up - configure flow control after autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures flow control settings after link is established
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automatically set to the negotiated flow control mode.
+ */
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
+
+ DEBUGFUNC("e1000_config_fc_after_link_up");
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_internal_serdes)
+ && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_copper)
+ && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_TX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ DEBUGOUT("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT
+ ("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ */
+static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
+{
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_check_for_serdes_link_generic");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), and our link partner is not trying to
+ * auto-negotiate with us (we are receiving idles or data),
+ * we need to force link up. We also need to give auto-negotiation
+ * time to complete.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ goto out;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_has_link = true;
+ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - forced.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - force failed.\n");
+ }
+ }
+
+ if (E1000_TXCW_ANE & er32(TXCW)) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - autoneg "
+ "completed successfully.\n");
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - no sync.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - autoneg failed\n");
+ }
+ }
+
+ out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks to see if the link status of the hardware has changed.
+ * Called by any function that needs to check the link status of the adapter.
+ */
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal =
+ (hw->mac_type >
+ e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544
+ || hw->mac_type == e1000_82543) && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val =
+ e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg)
+ return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes))
+ e1000_check_for_serdes_link_generic(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_speed_and_duplex
+ * @hw: Struct containing variables accessed by shared code
+ * @speed: Speed of the connection
+ * @duplex: Duplex setting of the connection
+
+ * Detects the current speed and duplex settings of the hardware.
+ */
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100
+ && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
+ || (*speed == SPEED_10
+ && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_wait_autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Blocks until autoneg completes or times out (~4.5 seconds)
+ */
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_wait_autoneg");
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_raise_mdi_clk - Raises the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_lower_mdi_clk - Lowers the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
+ * @hw: Struct containing variables accessed by shared code
+ * @data: Data to send out to the PHY
+ * @count: Number of bits to shift out
+ *
+ * Bits are shifted out in MSB to LSB order.
+ */
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
+{
+ u32 ctrl;
+ u32 mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = er32(CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ udelay(10);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/**
+ * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Bits are shifted in in MSB to LSB order.
+ */
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+
+/**
+ * e1000_read_phy_reg - read a phy register
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to read
+ *
+ * Reads the value from a PHY register, if the value is on a specific non zero
+ * page, sets the page first.
+ */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
+{
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_read_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16) mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_phy_reg - write a phy register
+ *
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to write
+ * @data: data to write to the PHY
+
+ * Writes a value to a PHY register
+ */
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_write_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((u32) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32) phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_hw_reset - reset the phy, hardware style
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Returns the PHY to the power-on reset state
+ */
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_phy_hw_reset");
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For e1000 hardware, we delay for 10ms between the assert
+ * and deassert.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ msleep(10);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_reset - reset the phy to commit settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY
+ * Sets bit 15 of the MII Control register
+ */
+s32 e1000_phy_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_reset");
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_detect_gig_phy - check the phy type
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Probes the expected PHY address for known PHY IDs
+ */
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
+
+ DEBUGFUNC("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32) (phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID)
+ match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID)
+ match = true;
+ break;
+ default:
+ DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/**
+ * e1000_phy_reset_dsp - reset DSP
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY's DSP
+ */
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_phy_reset_dsp");
+
+ do {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val)
+ break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_igp_get_info - get igp specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for igp PHY only.
+ */
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_m88_get_info - get m88 specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for m88 PHY only.
+ */
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower :
+ e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ phy_info->cable_length =
+ (e1000_cable_length) ((phy_data &
+ M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_get_info - request phy info
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers
+ */
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ DEBUGOUT("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ DEBUGOUT("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ DEBUGOUT("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_eeprom_params - initialize sw eeprom vars
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured.
+ */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ DEBUGFUNC("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size =
+ (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_raise_ee_clk - Raises the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ */
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
+ * @hw: Struct containing variables accessed by shared code
+ * @count: number of bits to shift in
+ */
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000_acquire_eeprom - Prepares EEPROM for access
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ */
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i = 0;
+
+ DEBUGFUNC("e1000_acquire_eeprom");
+
+ eecd = er32(EECD);
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
+}
+
+/**
+ * e1000_release_eeprom - drop chip select
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Terminates a command by inverting the EEPROM's chip select pin
+ */
+static void e1000_release_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ DEBUGFUNC("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
+}
+
+/**
+ * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
+
+ DEBUGFUNC("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ * @words: number of words to read
+ */
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ DEBUGFUNC("e1000_read_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT2
+ ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
+ offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should release it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw,
+ EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ */
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16) EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+
+/**
+ * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ */
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16) EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ DEBUGOUT("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom - write words to the different EEPROM types.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ */
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ DEBUGFUNC("e1000_write_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
+}
+
+/**
+ * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_spi");
+
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw))
+ return -E1000_ERR_EEPROM;
+
+ e1000_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ eeprom->address_bits);
+
+ /* Send the data */
+
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
+
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO)
+ break;
+ udelay(50);
+ }
+ if (i == 200) {
+ DEBUGOUT("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
+
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_mac_addr - read the adapters MAC from eeprom
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ */
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+ u16 offset;
+ u16 eeprom_data, i;
+
+ DEBUGFUNC("e1000_read_mac_addr");
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_rx_addrs - Initializes receive address filters.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ */
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
+{
+ u32 i;
+ u32 rar_num;
+
+ DEBUGFUNC("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
+ * @hw: Struct containing variables accessed by shared code
+ * @mc_addr: the multicast address to hash
+ */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1:
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2:
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3:
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
+}
+
+/**
+ * e1000_rar_set - Puts an ethernet address into a receive address register.
+ * @hw: Struct containing variables accessed by shared code
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ */
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: Offset in VLAN filer table to write
+ * @value: Value to write into VLAN filter table
+ */
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ u32 temp;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_clear_vfta - Clears the VLAN filer table
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ DEBUGFUNC("e1000_id_led_init");
+
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
+
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ eeprom_data = ID_LED_DEFAULT;
+ }
+
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_led
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ */
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_setup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16) (hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_cleanup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_on - Turns on the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_off - Turns off the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543)
+ return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544)
+ return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+}
+
+/**
+ * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ */
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_reset_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_update_adaptive - update adaptive IFS
+ * @hw: Struct containing variables accessed by shared code
+ * @tx_packets: Number of transmits since last callback
+ * @total_collisions: Number of collisions since last callback
+ *
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ */
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val =
+ hw->ifs_min_val;
+ else
+ hw->current_ifs_val +=
+ hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode
+ && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
+ *
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
+{
+ u64 carry_bit;
+
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
+
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
+}
+
+/**
+ * e1000_get_bus_info
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Gets the current PCI bus type, speed, and width of the hardware
+ */
+void e1000_get_bus_info(struct e1000_hw *hw)
+{
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
+}
+
+/**
+ * e1000_write_reg_io
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset to write to
+ * @value: value to write
+ *
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ */
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
+
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
+}
+
+/**
+ * e1000_get_cable_length - Estimates the cable length.
+ * @hw: Struct containing variables accessed by shared code
+ * @min_length: The estimated minimum length
+ * @max_length: The estimated maximum length
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ */
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
+{
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
+
+ DEBUGFUNC("e1000_get_cable_length");
+
+ *min_length = *max_length = 0;
+
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D
+ };
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val =
+ e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >=
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
+ || (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
+
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value <
+ IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
+
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
+
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_polarity - Check the cable polarity
+ * @hw: Struct containing variables accessed by shared code
+ * @polarity: output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ */
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_polarity");
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity =
+ (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_downshift - Check if Downshift occurred
+ * @hw: Struct containing variables accessed by shared code
+ * @downshift: output parameter : 0 - No Downshift occurred.
+ * 1 - Downshift occurred.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ */
+static s32 e1000_check_downshift(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_downshift");
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded =
+ (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_dsp_after_link_change
+ * @hw: Struct containing variables accessed by shared code
+ * @link_up: was link up at the time this was called
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ */
+
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+{
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D
+ };
+ u16 min_length, max_length;
+
+ DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (speed == SPEED_1000) {
+
+ ret_val =
+ e1000_get_cable_length(hw, &min_length,
+ &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled)
+ && min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw,
+ dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &=
+ ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ dsp_reg_array
+ [i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state =
+ e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled)
+ && (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val =
+ e1000_read_phy_reg(hw,
+ PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs +=
+ (phy_data &
+ SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs >
+ SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
+ {
+ hw->ffe_config_state =
+ e1000_ffe_config_active;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val =
+ e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
+
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_phy_mode - Set PHY to class A mode
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ */
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val =
+ e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
+ 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_d3_lplu_state - set d3 link power state
+ * @hw: Struct containing variables accessed by shared code
+ * @active: true to enable lplu false to disable lplu.
+ *
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisement
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
+ || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
+ || (hw->autoneg_advertised ==
+ AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_vco_speed
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ */
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_set_vco_speed");
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ /* Set PHY register 30, page 5, bit 8 to 0 */
+
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+
+/**
+ * e1000_enable_mng_pass_thru - check for bmc pass through
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ * returns: - true/false
+ */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
+}
+
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
+
+ /* Polarity reversal workaround for forced 10F/10H links. */
+
+ /* Disable the transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
+ break;
+ mdelay(100);
+ }
+
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_auto_rd_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Check for EEPROM Auto Read bit done.
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_auto_rd_done");
+ msleep(5);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_phy_cfg_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks if the PHY configuration is done
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+ mdelay(10);
+ return E1000_SUCCESS;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.33-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3048 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep-2.6.33-ethercat.h"
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controlers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_num_macs
+} e1000_mac_type;
+
+typedef enum {
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
+} e1000_eeprom_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+/* Flow Control Settings */
+typedef enum {
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
+} e1000_fc_type;
+
+struct e1000_shadow_ram {
+ u16 eeprom_word;
+ bool modified;
+};
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_reserved
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
+} e1000_igp_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
+} e1000_downshift;
+
+typedef enum {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+} e1000_smart_speed;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+typedef enum {
+ e1000_phy_m88 = 0,
+ e1000_phy_igp,
+ e1000_phy_undefined = 0xFF
+} e1000_phy_type;
+
+typedef enum {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+} e1000_ms_type;
+
+typedef enum {
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
+} e1000_ffe_config;
+
+typedef enum {
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
+} e1000_dsp_config;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_eeprom_info {
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+};
+
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+
+#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
+ (((_value) & 0xff00) >> 8))
+
+/* Function prototypes */
+/* Initialization */
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+void e1000_set_media_type(struct e1000_hw *hw);
+
+/* Link Configuration */
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+
+/* PHY */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+
+/* EEPROM Functions */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
+
+/* MNG HOST IF functions */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+#endif
+
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
+
+/* Filters (multicast, vlan, receive) */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+/* LED functions */
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
+
+/* Adaptive IFS Functions */
+
+/* Everything else */
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 * mac_addr);
+void e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_pci_set_mwi(struct e1000_hw *hw);
+void e1000_pci_clear_mwi(struct e1000_hw *hw);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
+/* Port I/O is only supported on 82544 and newer */
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82540EP_LOM 0x1016
+#define E1000_DEV_ID_82540EP 0x1017
+#define E1000_DEV_ID_82540EP_LP 0x101E
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
+#define E1000_DEV_ID_82545GM_FIBER 0x1027
+#define E1000_DEV_ID_82545GM_SERDES 0x1028
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
+#define E1000_DEV_ID_82541EI 0x1013
+#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
+#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82547GI 0x1075
+#define E1000_DEV_ID_82541GI 0x1076
+#define E1000_DEV_ID_82541GI_MOBILE 0x1077
+#define E1000_DEV_ID_82541GI_LF 0x107C
+#define E1000_DEV_ID_82546GB_COPPER 0x1079
+#define E1000_DEV_ID_82546GB_FIBER 0x107A
+#define E1000_DEV_ID_82546GB_SERDES 0x107B
+#define E1000_DEV_ID_82546GB_PCIE 0x108A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
+#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
+};
+
+/* Number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile u8 ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_FLA E1000_FLA
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
+#define E1000_82542_ERT E1000_ERT
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
+#define E1000_82542_TDFHS E1000_TDFHS
+#define E1000_82542_TDFTS E1000_TDFTS
+#define E1000_82542_TDFPC E1000_TDFPC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_TDFH 0x08010
+#define E1000_82542_TDFT 0x08018
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
+
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_has_link;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool bad_tx_carr_stats_fd;
+ bool has_smbus;
+};
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#ifndef E1000_EEPROM_GRANT_ATTEMPTS
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
+
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC0
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* SPI EEPROM Status Register */
+#define EEPROM_STATUS_RDY_SPI 0x01
+#define EEPROM_STATUS_WEN_SPI 0x02
+#define EEPROM_STATUS_BP0_SPI 0x04
+#define EEPROM_STATUS_BP1_SPI 0x08
+#define EEPROM_STATUS_WPEN_SPI 0x80
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Interface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* PCI-Ex registers*/
+
+/* PCI-Ex Control Register */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
+/* PCI-Ex Config Space */
+#define PCI_EX_LINK_STATUS 0x12
+#define PCI_EX_LINK_WIDTH_MASK 0x3F0
+#define PCI_EX_LINK_WIDTH_SHIFT 4
+
+/* EEPROM Commands - Microwire */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
+
+/* EEPROM Commands - SPI */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Size definitions */
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
+#define EEPROM_SIZE_MASK 0x1C00
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_PHY_CLASS_WORD 0x0007
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
+#define EEPROM_CFG 0x0012
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
+#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
+
+/* Mask bit for PHY class in Word 7 of the EEPROM */
+#define EEPROM_PHY_CLASS_A 0x8000
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
+
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+#define EEPROM_RESERVED_WORD 0xFFFF
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLLISION_DISTANCE_82542 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLD_SHIFT 12
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+/* Number of bits required to shift right the "pause" bits from the
+ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
+ */
+#define PAUSE_SHIFT 5
+
+/* Number of bits required to shift left the "SWDPIO" bits from the
+ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
+ */
+#define SWDPIO_SHIFT 17
+
+/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
+ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* Number of bits required to shift left the "ILOS" bit from the EEPROM
+ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
+ */
+#define ILOS_SHIFT 3
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* Number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = true;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = false;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+
+/* IGP01E1000 AGC Registers - stores the cable length values*/
+#define IGP01E1000_PHY_AGC_A 0x1172
+#define IGP01E1000_PHY_AGC_B 0x1272
+#define IGP01E1000_PHY_AGC_C 0x1472
+#define IGP01E1000_PHY_AGC_D 0x1872
+
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+/* IGP01E1000 DSP Reset Register */
+#define IGP01E1000_PHY_DSP_RESET 0x1F33
+#define IGP01E1000_PHY_DSP_SET 0x1F71
+#define IGP01E1000_PHY_DSP_FFE 0x1F35
+
+#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
+#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
+#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
+#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
+#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
+
+#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
+#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
+
+#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
+#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
+#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
+#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
+
+#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
+/* IGP01E1000 PCS Initialization register - stores the polarity status when
+ * speed = 1000 Mbps. */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
+
+#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/* IGP01E1000 Specific Port Config Register - R/W */
+#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
+#define IGP01E1000_PSCFR_PRE_EN 0x0020
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
+#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
+#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
+
+/* IGP01E1000 Specific Port Status Register - R/O */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
+#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
+#define IGP01E1000_PSSR_LINK_UP 0x0400
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
+#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+
+/* IGP01E1000 Specific Port Control Register - R/W */
+#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
+#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
+#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
+#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+
+/* IGP01E1000 Specific Port Link Health Register */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
+#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
+#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
+#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
+#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
+#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
+#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
+#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
+#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
+
+/* IGP01E1000 Channel Quality Register */
+#define IGP01E1000_MSE_CHANNEL_D 0x000F
+#define IGP01E1000_MSE_CHANNEL_C 0x00F0
+#define IGP01E1000_MSE_CHANNEL_B 0x0F00
+#define IGP01E1000_MSE_CHANNEL_A 0xF000
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
+/* IGP01E1000 DSP reset macros */
+#define DSP_RESET_ENABLE 0x0
+#define DSP_RESET_DISABLE 0x2
+#define E1000_MAX_DSP_RESETS 10
+
+/* IGP01E1000 & IGP02E1000 AGC Registers */
+
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+
+/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
+#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
+
+/* The precision error of the cable length is +/- 10 meters */
+#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
+
+/* IGP01E1000 PCS Initialization register */
+/* bits 3:6 in the PCS registers stores the channels polarity */
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+/* IGP01E1000 GMII FIFO Register */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+
+/* IGP01E1000 Analog Register */
+#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
+#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
+#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
+#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
+
+#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
+#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
+#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
+#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
+#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
+
+#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
+#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
+#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
+#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88_VENDOR 0x0141
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define L1LXT971A_PHY_ID 0x001378E0
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define ICH_CYCLE_READ 0x0
+#define ICH_CYCLE_RESERVED 0x1
+#define ICH_CYCLE_WRITE 0x2
+#define ICH_CYCLE_ERASE 0x3
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_FRACC 0x0050
+#define ICH_FLASH_FREG0 0x0054
+#define ICH_FLASH_FREG1 0x0058
+#define ICH_FLASH_FREG2 0x005C
+#define ICH_FLASH_FREG3 0x0060
+#define ICH_FLASH_FPR0 0x0074
+#define ICH_FLASH_FPR1 0x0078
+#define ICH_FLASH_SSFSTS 0x0090
+#define ICH_FLASH_SSFCTL 0x0092
+#define ICH_FLASH_PREOP 0x0094
+#define ICH_FLASH_OPTYPE 0x0096
+#define ICH_FLASH_OPMENU 0x0098
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+#define ICH_FLASH_SECTOR_SIZE 4096
+#define ICH_GFPREG_BASE_MASK 0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,5634 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ */
+
+/* e1000_hw.c
+ * Shared functions for accessing and configuring the MAC
+ */
+
+#include "e1000_hw.h"
+
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity);
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
+static void e1000_clear_vfta(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
+static void e1000_phy_init_script(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
+static void e1000_release_eeprom(struct e1000_hw *hw);
+static void e1000_standby_eeprom(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+
+/* IGP cable length table */
+static const
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
+ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
+ 120, 120
+};
+
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
+/**
+ * e1000_set_phy_type - Set the phy type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_phy_type");
+
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ hw->phy_type = e1000_phy_igp;
+ break;
+ }
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ DEBUGFUNC("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+ msleep(20);
+
+ e1000_write_phy_reg(hw, 0x0000, 0x0140);
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
+
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
+
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
+ &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_STATUS,
+ &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse =
+ fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse >
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -=
+ IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse ==
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused =
+ (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse &
+ IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_CONTROL,
+ fused);
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
+}
+
+/**
+ * e1000_set_mac_type - Set the mac type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = true;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = true;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_media_type - Set media type and TBI compatibility.
+ * @hw: Struct containing variables accessed by shared code
+ */
+void e1000_set_media_type(struct e1000_hw *hw)
+{
+ u32 status;
+
+ DEBUGFUNC("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
+}
+
+/**
+ * e1000_reset_hw: reset the hardware completely
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ */
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ msleep(5);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_hw: Performs basic configuration of the adapter.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ */
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 ctrl_ext;
+
+ DEBUGFUNC("e1000_init_hw");
+
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occurring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix
+ && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl =
+ (ctrl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
+ * @hw: Struct containing variables accessed by shared code.
+ */
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+{
+ u16 eeprom_data;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_adjust_serdes_amplitude");
+
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_link - Configures flow control and link settings.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the appropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_setup_link");
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
+
+ hw->original_fc = hw->fc;
+
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT
+ ("Initializing the Flow Control address, type and timer regs\n");
+
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ */
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_setup_fiber_serdes_link");
+
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-negotiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled\n");
+
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ hw->txcw = txcw;
+ msleep(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_preconfig - early configuration for copper
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Make sure we have a valid PHY and change PHY mode before link setup.
+ */
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_preconfig");
+
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |=
+ (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
+
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_igp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &=
+ ~(IGP01E1000_PSCR_AUTO_MDIX |
+ IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val =
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_autoneg - setup auto-neg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Setup auto-negotiation and flow control advertisements,
+ * and then perform auto-negotiation.
+ */
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->get_link_status = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_postconfig - post link setup
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Config the MAC and the PHY after link is up.
+ * 1) Set up the MAC to the current PHY speed/duplex
+ * if we are on 82543. If we
+ * are on newer silicon, we only need to configure
+ * collision distance in the Transmit Control Register.
+ * 2) Set up flow control on the MAC to that established with
+ * the link partner.
+ * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+ */
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
+
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_copper_link - phy/speed/duplex setting
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Detects which PHY is present and sets up the speed and duplex
+ */
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
+
+ DEBUGOUT("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_setup_autoneg - phy settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures PHY autoneg and flow control advertisement settings
+ */
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ DEBUGFUNC("e1000_phy_setup_autoneg");
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT
+ ("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_force_speed_duplex - force link settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Force PHY speed and duplex settings to hw->forced_speed_duplex
+ */
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
+
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ DEBUGOUT("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ DEBUGOUT("Forcing 10mb ");
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if (hw->phy_type == e1000_phy_m88) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ }
+ if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
+ && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_collision_dist - set collision distance register
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets the collision distance in the Transmit Control register.
+ * Link should have been established previously. Reads the speed and duplex
+ * information from the Device Status register.
+ */
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
+
+ DEBUGFUNC("e1000_config_collision_dist");
+
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_config_mac_to_phy - sync phy and mac settings
+ * @hw: Struct containing variables accessed by shared code
+ * @mii_reg: data to write to the MII control register
+ *
+ * Sets MAC speed and duplex settings to reflect the those in the PHY
+ * The contents of the PHY register containing the needed information need to
+ * be passed in.
+ */
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_config_mac_to_phy");
+
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_force_mac_fc - force flow control settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Forces the MAC's flow control settings.
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ */
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_fc_after_link_up - configure flow control after autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures flow control settings after link is established
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automatically set to the negotiated flow control mode.
+ */
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
+
+ DEBUGFUNC("e1000_config_fc_after_link_up");
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_internal_serdes)
+ && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_copper)
+ && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_TX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ DEBUGOUT("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT
+ ("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ */
+static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
+{
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_check_for_serdes_link_generic");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), and our link partner is not trying to
+ * auto-negotiate with us (we are receiving idles or data),
+ * we need to force link up. We also need to give auto-negotiation
+ * time to complete.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ goto out;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_has_link = true;
+ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - forced.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - force failed.\n");
+ }
+ }
+
+ if (E1000_TXCW_ANE & er32(TXCW)) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - autoneg "
+ "completed successfully.\n");
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - no sync.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - autoneg failed\n");
+ }
+ }
+
+ out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks to see if the link status of the hardware has changed.
+ * Called by any function that needs to check the link status of the adapter.
+ */
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal =
+ (hw->mac_type >
+ e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544
+ || hw->mac_type == e1000_82543) && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val =
+ e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg)
+ return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes))
+ e1000_check_for_serdes_link_generic(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_speed_and_duplex
+ * @hw: Struct containing variables accessed by shared code
+ * @speed: Speed of the connection
+ * @duplex: Duplex setting of the connection
+
+ * Detects the current speed and duplex settings of the hardware.
+ */
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100
+ && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
+ || (*speed == SPEED_10
+ && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_wait_autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Blocks until autoneg completes or times out (~4.5 seconds)
+ */
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_wait_autoneg");
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_raise_mdi_clk - Raises the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_lower_mdi_clk - Lowers the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
+ * @hw: Struct containing variables accessed by shared code
+ * @data: Data to send out to the PHY
+ * @count: Number of bits to shift out
+ *
+ * Bits are shifted out in MSB to LSB order.
+ */
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
+{
+ u32 ctrl;
+ u32 mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = er32(CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ udelay(10);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/**
+ * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Bits are shifted in in MSB to LSB order.
+ */
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+
+/**
+ * e1000_read_phy_reg - read a phy register
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to read
+ *
+ * Reads the value from a PHY register, if the value is on a specific non zero
+ * page, sets the page first.
+ */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
+{
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_read_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16) mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_phy_reg - write a phy register
+ *
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to write
+ * @data: data to write to the PHY
+
+ * Writes a value to a PHY register
+ */
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_write_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((u32) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32) phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_hw_reset - reset the phy, hardware style
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Returns the PHY to the power-on reset state
+ */
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_phy_hw_reset");
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For e1000 hardware, we delay for 10ms between the assert
+ * and deassert.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ msleep(10);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_reset - reset the phy to commit settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY
+ * Sets bit 15 of the MII Control register
+ */
+s32 e1000_phy_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_reset");
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_detect_gig_phy - check the phy type
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Probes the expected PHY address for known PHY IDs
+ */
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
+
+ DEBUGFUNC("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32) (phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID)
+ match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID)
+ match = true;
+ break;
+ default:
+ DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/**
+ * e1000_phy_reset_dsp - reset DSP
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY's DSP
+ */
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_phy_reset_dsp");
+
+ do {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val)
+ break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_igp_get_info - get igp specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for igp PHY only.
+ */
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_m88_get_info - get m88 specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for m88 PHY only.
+ */
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower :
+ e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ phy_info->cable_length =
+ (e1000_cable_length) ((phy_data &
+ M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_get_info - request phy info
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers
+ */
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ DEBUGOUT("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ DEBUGOUT("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ DEBUGOUT("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_eeprom_params - initialize sw eeprom vars
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured.
+ */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ DEBUGFUNC("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size =
+ (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_raise_ee_clk - Raises the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ */
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
+ * @hw: Struct containing variables accessed by shared code
+ * @count: number of bits to shift in
+ */
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000_acquire_eeprom - Prepares EEPROM for access
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ */
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i = 0;
+
+ DEBUGFUNC("e1000_acquire_eeprom");
+
+ eecd = er32(EECD);
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
+}
+
+/**
+ * e1000_release_eeprom - drop chip select
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Terminates a command by inverting the EEPROM's chip select pin
+ */
+static void e1000_release_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ DEBUGFUNC("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
+}
+
+/**
+ * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
+
+ DEBUGFUNC("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ * @words: number of words to read
+ */
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ DEBUGFUNC("e1000_read_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT2
+ ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
+ offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should release it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw,
+ EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ */
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16) EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+
+/**
+ * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ */
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16) EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ DEBUGOUT("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom - write words to the different EEPROM types.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ */
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ DEBUGFUNC("e1000_write_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
+}
+
+/**
+ * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_spi");
+
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw))
+ return -E1000_ERR_EEPROM;
+
+ e1000_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ eeprom->address_bits);
+
+ /* Send the data */
+
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
+
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO)
+ break;
+ udelay(50);
+ }
+ if (i == 200) {
+ DEBUGOUT("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
+
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_mac_addr - read the adapters MAC from eeprom
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ */
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+ u16 offset;
+ u16 eeprom_data, i;
+
+ DEBUGFUNC("e1000_read_mac_addr");
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_rx_addrs - Initializes receive address filters.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ */
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
+{
+ u32 i;
+ u32 rar_num;
+
+ DEBUGFUNC("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
+ * @hw: Struct containing variables accessed by shared code
+ * @mc_addr: the multicast address to hash
+ */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1:
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2:
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3:
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
+}
+
+/**
+ * e1000_rar_set - Puts an ethernet address into a receive address register.
+ * @hw: Struct containing variables accessed by shared code
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ */
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: Offset in VLAN filer table to write
+ * @value: Value to write into VLAN filter table
+ */
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ u32 temp;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_clear_vfta - Clears the VLAN filer table
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ DEBUGFUNC("e1000_id_led_init");
+
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
+
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ eeprom_data = ID_LED_DEFAULT;
+ }
+
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_led
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ */
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_setup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16) (hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_cleanup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_on - Turns on the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_off - Turns off the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543)
+ return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544)
+ return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+}
+
+/**
+ * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ */
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_reset_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_update_adaptive - update adaptive IFS
+ * @hw: Struct containing variables accessed by shared code
+ * @tx_packets: Number of transmits since last callback
+ * @total_collisions: Number of collisions since last callback
+ *
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ */
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val =
+ hw->ifs_min_val;
+ else
+ hw->current_ifs_val +=
+ hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode
+ && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
+ *
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
+{
+ u64 carry_bit;
+
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
+
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
+}
+
+/**
+ * e1000_get_bus_info
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Gets the current PCI bus type, speed, and width of the hardware
+ */
+void e1000_get_bus_info(struct e1000_hw *hw)
+{
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
+}
+
+/**
+ * e1000_write_reg_io
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset to write to
+ * @value: value to write
+ *
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ */
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
+
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
+}
+
+/**
+ * e1000_get_cable_length - Estimates the cable length.
+ * @hw: Struct containing variables accessed by shared code
+ * @min_length: The estimated minimum length
+ * @max_length: The estimated maximum length
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ */
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
+{
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
+
+ DEBUGFUNC("e1000_get_cable_length");
+
+ *min_length = *max_length = 0;
+
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D
+ };
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val =
+ e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >=
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
+ || (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
+
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value <
+ IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
+
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
+
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_polarity - Check the cable polarity
+ * @hw: Struct containing variables accessed by shared code
+ * @polarity: output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ */
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_polarity");
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity =
+ (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_downshift - Check if Downshift occurred
+ * @hw: Struct containing variables accessed by shared code
+ * @downshift: output parameter : 0 - No Downshift occurred.
+ * 1 - Downshift occurred.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ */
+static s32 e1000_check_downshift(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_downshift");
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded =
+ (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_dsp_after_link_change
+ * @hw: Struct containing variables accessed by shared code
+ * @link_up: was link up at the time this was called
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ */
+
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+{
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D
+ };
+ u16 min_length, max_length;
+
+ DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (speed == SPEED_1000) {
+
+ ret_val =
+ e1000_get_cable_length(hw, &min_length,
+ &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled)
+ && min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw,
+ dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &=
+ ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ dsp_reg_array
+ [i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state =
+ e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled)
+ && (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val =
+ e1000_read_phy_reg(hw,
+ PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs +=
+ (phy_data &
+ SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs >
+ SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
+ {
+ hw->ffe_config_state =
+ e1000_ffe_config_active;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val =
+ e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
+
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_phy_mode - Set PHY to class A mode
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ */
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val =
+ e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
+ 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_d3_lplu_state - set d3 link power state
+ * @hw: Struct containing variables accessed by shared code
+ * @active: true to enable lplu false to disable lplu.
+ *
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisement
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
+ || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
+ || (hw->autoneg_advertised ==
+ AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_vco_speed
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ */
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_set_vco_speed");
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ /* Set PHY register 30, page 5, bit 8 to 0 */
+
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+
+/**
+ * e1000_enable_mng_pass_thru - check for bmc pass through
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ * returns: - true/false
+ */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
+}
+
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
+
+ /* Polarity reversal workaround for forced 10F/10H links. */
+
+ /* Disable the transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
+ break;
+ mdelay(100);
+ }
+
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_auto_rd_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Check for EEPROM Auto Read bit done.
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_auto_rd_done");
+ msleep(5);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_phy_cfg_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks if the PHY configuration is done
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+ mdelay(10);
+ return E1000_SUCCESS;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_hw-2.6.33-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,3048 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep.h"
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controlers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_num_macs
+} e1000_mac_type;
+
+typedef enum {
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
+} e1000_eeprom_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+/* Flow Control Settings */
+typedef enum {
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
+} e1000_fc_type;
+
+struct e1000_shadow_ram {
+ u16 eeprom_word;
+ bool modified;
+};
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_reserved
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
+} e1000_igp_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
+} e1000_downshift;
+
+typedef enum {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+} e1000_smart_speed;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+typedef enum {
+ e1000_phy_m88 = 0,
+ e1000_phy_igp,
+ e1000_phy_undefined = 0xFF
+} e1000_phy_type;
+
+typedef enum {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+} e1000_ms_type;
+
+typedef enum {
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
+} e1000_ffe_config;
+
+typedef enum {
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
+} e1000_dsp_config;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_eeprom_info {
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+};
+
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+
+#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
+ (((_value) & 0xff00) >> 8))
+
+/* Function prototypes */
+/* Initialization */
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+void e1000_set_media_type(struct e1000_hw *hw);
+
+/* Link Configuration */
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+
+/* PHY */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+
+/* EEPROM Functions */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
+
+/* MNG HOST IF functions */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+#endif
+
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
+
+/* Filters (multicast, vlan, receive) */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+/* LED functions */
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
+
+/* Adaptive IFS Functions */
+
+/* Everything else */
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 * mac_addr);
+void e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_pci_set_mwi(struct e1000_hw *hw);
+void e1000_pci_clear_mwi(struct e1000_hw *hw);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
+/* Port I/O is only supported on 82544 and newer */
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82540EP_LOM 0x1016
+#define E1000_DEV_ID_82540EP 0x1017
+#define E1000_DEV_ID_82540EP_LP 0x101E
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
+#define E1000_DEV_ID_82545GM_FIBER 0x1027
+#define E1000_DEV_ID_82545GM_SERDES 0x1028
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
+#define E1000_DEV_ID_82541EI 0x1013
+#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
+#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82547GI 0x1075
+#define E1000_DEV_ID_82541GI 0x1076
+#define E1000_DEV_ID_82541GI_MOBILE 0x1077
+#define E1000_DEV_ID_82541GI_LF 0x107C
+#define E1000_DEV_ID_82546GB_COPPER 0x1079
+#define E1000_DEV_ID_82546GB_FIBER 0x107A
+#define E1000_DEV_ID_82546GB_SERDES 0x107B
+#define E1000_DEV_ID_82546GB_PCIE 0x108A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
+#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
+};
+
+/* Number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile u8 ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_FLA E1000_FLA
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
+#define E1000_82542_ERT E1000_ERT
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
+#define E1000_82542_TDFHS E1000_TDFHS
+#define E1000_82542_TDFTS E1000_TDFTS
+#define E1000_82542_TDFPC E1000_TDFPC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_TDFH 0x08010
+#define E1000_82542_TDFT 0x08018
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
+
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_has_link;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool bad_tx_carr_stats_fd;
+ bool has_smbus;
+};
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#ifndef E1000_EEPROM_GRANT_ATTEMPTS
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
+
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC0
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* SPI EEPROM Status Register */
+#define EEPROM_STATUS_RDY_SPI 0x01
+#define EEPROM_STATUS_WEN_SPI 0x02
+#define EEPROM_STATUS_BP0_SPI 0x04
+#define EEPROM_STATUS_BP1_SPI 0x08
+#define EEPROM_STATUS_WPEN_SPI 0x80
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Interface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* PCI-Ex registers*/
+
+/* PCI-Ex Control Register */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
+/* PCI-Ex Config Space */
+#define PCI_EX_LINK_STATUS 0x12
+#define PCI_EX_LINK_WIDTH_MASK 0x3F0
+#define PCI_EX_LINK_WIDTH_SHIFT 4
+
+/* EEPROM Commands - Microwire */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
+
+/* EEPROM Commands - SPI */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Size definitions */
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
+#define EEPROM_SIZE_MASK 0x1C00
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_PHY_CLASS_WORD 0x0007
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
+#define EEPROM_CFG 0x0012
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
+#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
+
+/* Mask bit for PHY class in Word 7 of the EEPROM */
+#define EEPROM_PHY_CLASS_A 0x8000
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
+
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+#define EEPROM_RESERVED_WORD 0xFFFF
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLLISION_DISTANCE_82542 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLD_SHIFT 12
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+/* Number of bits required to shift right the "pause" bits from the
+ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
+ */
+#define PAUSE_SHIFT 5
+
+/* Number of bits required to shift left the "SWDPIO" bits from the
+ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
+ */
+#define SWDPIO_SHIFT 17
+
+/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
+ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* Number of bits required to shift left the "ILOS" bit from the EEPROM
+ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
+ */
+#define ILOS_SHIFT 3
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* Number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = true;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = false;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+
+/* IGP01E1000 AGC Registers - stores the cable length values*/
+#define IGP01E1000_PHY_AGC_A 0x1172
+#define IGP01E1000_PHY_AGC_B 0x1272
+#define IGP01E1000_PHY_AGC_C 0x1472
+#define IGP01E1000_PHY_AGC_D 0x1872
+
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+/* IGP01E1000 DSP Reset Register */
+#define IGP01E1000_PHY_DSP_RESET 0x1F33
+#define IGP01E1000_PHY_DSP_SET 0x1F71
+#define IGP01E1000_PHY_DSP_FFE 0x1F35
+
+#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
+#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
+#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
+#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
+#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
+
+#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
+#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
+
+#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
+#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
+#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
+#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
+
+#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
+/* IGP01E1000 PCS Initialization register - stores the polarity status when
+ * speed = 1000 Mbps. */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
+
+#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/* IGP01E1000 Specific Port Config Register - R/W */
+#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
+#define IGP01E1000_PSCFR_PRE_EN 0x0020
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
+#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
+#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
+
+/* IGP01E1000 Specific Port Status Register - R/O */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
+#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
+#define IGP01E1000_PSSR_LINK_UP 0x0400
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
+#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+
+/* IGP01E1000 Specific Port Control Register - R/W */
+#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
+#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
+#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
+#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+
+/* IGP01E1000 Specific Port Link Health Register */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
+#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
+#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
+#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
+#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
+#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
+#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
+#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
+#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
+
+/* IGP01E1000 Channel Quality Register */
+#define IGP01E1000_MSE_CHANNEL_D 0x000F
+#define IGP01E1000_MSE_CHANNEL_C 0x00F0
+#define IGP01E1000_MSE_CHANNEL_B 0x0F00
+#define IGP01E1000_MSE_CHANNEL_A 0xF000
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
+/* IGP01E1000 DSP reset macros */
+#define DSP_RESET_ENABLE 0x0
+#define DSP_RESET_DISABLE 0x2
+#define E1000_MAX_DSP_RESETS 10
+
+/* IGP01E1000 & IGP02E1000 AGC Registers */
+
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+
+/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
+#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
+
+/* The precision error of the cable length is +/- 10 meters */
+#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
+
+/* IGP01E1000 PCS Initialization register */
+/* bits 3:6 in the PCS registers stores the channels polarity */
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+/* IGP01E1000 GMII FIFO Register */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+
+/* IGP01E1000 Analog Register */
+#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
+#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
+#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
+#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
+
+#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
+#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
+#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
+#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
+#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
+
+#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
+#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
+#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
+#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88_VENDOR 0x0141
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define L1LXT971A_PHY_ID 0x001378E0
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define ICH_CYCLE_READ 0x0
+#define ICH_CYCLE_RESERVED 0x1
+#define ICH_CYCLE_WRITE 0x2
+#define ICH_CYCLE_ERASE 0x3
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_FRACC 0x0050
+#define ICH_FLASH_FREG0 0x0054
+#define ICH_FLASH_FREG1 0x0058
+#define ICH_FLASH_FREG2 0x005C
+#define ICH_FLASH_FREG3 0x0060
+#define ICH_FLASH_FPR0 0x0074
+#define ICH_FLASH_FPR1 0x0078
+#define ICH_FLASH_SSFSTS 0x0090
+#define ICH_FLASH_SSFCTL 0x0092
+#define ICH_FLASH_PREOP 0x0094
+#define ICH_FLASH_OPTYPE 0x0096
+#define ICH_FLASH_OPMENU 0x0098
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+#define ICH_FLASH_SECTOR_SIZE 4096
+#define ICH_GFPREG_BASE_MASK 0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+#endif /* _E1000_HW_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_main-2.6.31-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,5027 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ vim: noexpandtab
+
+*******************************************************************************/
+
+#include "e1000-2.6.31-ethercat.h"
+#include <net/ip6_checksum.h>
+
+char e1000_driver_name[] = "ec_e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#define DRV_VERSION "7.3.21-k3-NAPI"
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static struct pci_device_id e1000_pci_tbl[] = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ /* required last entry */
+ {0,}
+};
+
+// do not auto-load driver
+// MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_rx_mode(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+void ec_poll(struct net_device *);
+static irqreturn_t e1000_intr(int irq, void *data);
+static irqreturn_t e1000_intr_msi(int irq, void *data);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static int e1000_clean(struct napi_struct *napi, int budget);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ /* Power Managment Hooks */
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT-capable Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init e1000_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ e1000_driver_string, e1000_driver_version);
+
+ printk(KERN_INFO "%s\n", e1000_copyright);
+
+ ret = pci_register_driver(&e1000_driver);
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ printk(KERN_INFO "e1000: copybreak disabled\n");
+ else
+ printk(KERN_INFO "e1000: copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ irq_handler_t handler = e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
+
+ if (adapter->ecdev)
+ return 0;
+
+ if (hw->mac_type >= e1000_82571) {
+ adapter->have_msi = !pci_enable_msi(adapter->pdev);
+ if (adapter->have_msi) {
+ handler = e1000_intr_msi;
+ irq_flags = 0;
+ }
+ }
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+ }
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ if (adapter->ecdev)
+ return;
+
+ free_irq(adapter->pdev->irq, netdev);
+
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->ecdev)
+ return;
+
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->ecdev)
+ return;
+
+ ew32(IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH();
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = hw->mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+/**
+ * e1000_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded. For AMT version (only with 82573) i
+ * of the f/w this means that the network i/f is closed.
+ *
+ **/
+
+static void e1000_release_hw_control(struct e1000_adapter *adapter)
+{
+ u32 ctrl_ext;
+ u32 swsm;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Let firmware taken over control of h/w */
+ switch (hw->mac_type) {
+ case e1000_82573:
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * e1000_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
+ * of the f/w this means that the network i/f is open.
+ *
+ **/
+
+static void e1000_get_hw_control(struct e1000_adapter *adapter)
+{
+ u32 ctrl_ext;
+ u32 swsm;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Let firmware know the driver has taken over */
+ switch (hw->mac_type) {
+ case e1000_82573:
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+}
+
+static void e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ /* enable receiving management packets to the host */
+ /* this will probably generate destination unreachable messages
+ * from the host OS, but the packets will be handled on SMBUS */
+ if (hw->has_manc2h) {
+ u32 manc2h = er32(MANC2H);
+
+ manc |= E1000_MANC_EN_MNG2HOST;
+#define E1000_MNG2HOST_PORT_623 (1 << 5)
+#define E1000_MNG2HOST_PORT_664 (1 << 6)
+ manc2h |= E1000_MNG2HOST_PORT_623;
+ manc2h |= E1000_MNG2HOST_PORT_664;
+ ew32(MANC2H, manc2h);
+ }
+
+ ew32(MANC, manc);
+ }
+}
+
+static void e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ if (hw->has_manc2h)
+ manc &= ~E1000_MANC_EN_MNG2HOST;
+
+ /* don't explicitly have to mess with MANC2H since
+ * MANC has an enable disable that gates MANC2H */
+
+ ew32(MANC, manc);
+ }
+}
+
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ e1000_set_rx_mode(netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ if (adapter->ecdev) {
+ /* fill rx ring completely! */
+ adapter->alloc_rx_buf(adapter, ring, ring->count);
+ } else {
+ /* this one leaves the last ring element unallocated! */
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+ }
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ if (!adapter->ecdev) {
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+ }
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is true *
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ u16 mii_reg = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (er32(MANC) & E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ if (e1000_check_mng_mode(hw) ||
+ e1000_check_phy_reset_block(hw))
+ goto out;
+ break;
+ default:
+ goto out;
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+out:
+ return;
+}
+
+void e1000_down(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl, tctl;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ if (!adapter->ecdev) {
+ /* flush and sleep below */
+ /* can be netif_tx_disable when NETIF_F_LLTX is removed */
+ netif_stop_queue(netdev);
+ }
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ if (!adapter->ecdev) {
+ napi_disable(&adapter->napi);
+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+ }
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ if (!adapter->ecdev) {
+ netif_carrier_off(netdev);
+ }
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+void e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
+ bool legacy_pba_adjust = false;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ pba = E1000_PBA_38K;
+ break;
+ case e1000_82573:
+ pba = E1000_PBA_20K;
+ break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ case e1000_undefined:
+ case e1000_num_macs:
+ break;
+ }
+
+ if (legacy_pba_adjust) {
+ if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+
+ if (hw->mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ /* adjust PBA for jumbo frames */
+ ew32(PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accomodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accomodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* don't include ethernet FCS because hardware appends/strips */
+ min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
+ VLAN_TAG_SIZE;
+ min_tx_space = min_rx_space;
+ min_tx_space *= 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (hw->mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space) {
+ switch (hw->mac_type) {
+ case e1000_82573:
+ /* ERT enabled in e1000_configure_rx */
+ break;
+ default:
+ pba = min_rx_space;
+ break;
+ }
+ }
+ }
+ }
+
+ ew32(PBA, pba);
+
+ /* flow control settings */
+ /* Set the FC high water mark to 90% of the FIFO size.
+ * Required to clear last 3 LSB */
+ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+ /* We can't use 90% on small FIFOs because the remainder
+ * would be less than 1 full frame. In this case, we size
+ * it to allow at least a full frame above the high water
+ * mark. */
+ if (pba < E1000_PBA_16K)
+ fc_high_water_mark = (pba * 1024) - 1600;
+
+ hw->fc_high_water = fc_high_water_mark;
+ hw->fc_low_water = fc_high_water_mark - 8;
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->fc_pause_time = 0xFFFF;
+ else
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544)
+ ew32(WUC, 0);
+
+ if (e1000_init_hw(hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (hw->mac_type >= e1000_82544 &&
+ hw->mac_type <= e1000_82547_rev_2 &&
+ hw->autoneg == 1 &&
+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ u32 ctrl = er32(CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ ew32(CTRL, ctrl);
+ }
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(hw);
+ e1000_phy_get_info(hw, &adapter->phy_info);
+
+ if (!adapter->smart_power_down &&
+ (hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572)) {
+ u16 phy_data = 0;
+ /* speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed */
+ e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
+ e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ }
+
+ e1000_release_manageability(adapter);
+}
+
+/**
+ * Dump the eeprom for users having checksum issues
+ **/
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ethtool_eeprom eeprom;
+ const struct ethtool_ops *ops = netdev->ethtool_ops;
+ u8 *data;
+ int i;
+ u16 csum_old, csum_new = 0;
+
+ eeprom.len = ops->get_eeprom_len(netdev);
+ eeprom.offset = 0;
+
+ data = kmalloc(eeprom.len, GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
+ " data\n");
+ return;
+ }
+
+ ops->get_eeprom(netdev, &eeprom, data);
+
+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
+ csum_new += data[i] + (data[i + 1] << 8);
+ csum_new = EEPROM_SUM - csum_new;
+
+ printk(KERN_ERR "/*********************/\n");
+ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
+ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+
+ printk(KERN_ERR "Offset Values\n");
+ printk(KERN_ERR "======== ======\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
+
+ printk(KERN_ERR "Include this output when contacting your support "
+ "provider.\n");
+ printk(KERN_ERR "This is not a software error! Something bad "
+ "happened to your hardware or\n");
+ printk(KERN_ERR "EEPROM image. Ignoring this "
+ "problem could result in further problems,\n");
+ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
+ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
+ "which is invalid\n");
+ printk(KERN_ERR "and requires you to set the proper MAC "
+ "address manually before continuing\n");
+ printk(KERN_ERR "to enable this network device.\n");
+ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
+ "to your hardware vendor\n");
+ printk(KERN_ERR "or Intel Customer Support.\n");
+ printk(KERN_ERR "/*********************/\n");
+
+ kfree(data);
+}
+
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct net_device_ops e1000_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats = e1000_get_stats,
+ .ndo_set_rx_mode = e1000_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_register = e1000_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+
+ static int cards_found = 0;
+ static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
+ return err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ E1000_ERR("No usable DMA configuration, "
+ "aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
+
+ hw = &adapter->hw;
+ hw->back = adapter;
+
+ err = -EIO;
+ hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ hw->io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+ }
+
+ netdev->netdev_ops = &e1000_netdev_ops;
+ e1000_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ err = -EIO;
+ /* Flash BAR mapping must happen after e1000_sw_init
+ * because it depends on mac_type */
+ if ((hw->mac_type == e1000_ich8lan) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ hw->flash_address = pci_ioremap_bar(pdev, 1);
+ if (!hw->flash_address)
+ goto err_flashmap;
+ }
+
+ if (e1000_check_phy_reset_block(hw))
+ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+
+ if (hw->mac_type >= e1000_82543) {
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ if (hw->mac_type == e1000_ich8lan)
+ netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
+ }
+
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_82547))
+ netdev->features |= NETIF_F_TSO;
+
+ if (hw->mac_type > e1000_82547_rev_2)
+ netdev->features |= NETIF_F_TSO6;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
+
+ /* initialize eeprom parameters */
+ if (e1000_init_eeprom_params(hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(hw);
+
+ /* make sure the EEPROM is good */
+ if (e1000_validate_eeprom_checksum(hw) < 0) {
+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ e1000_dump_eeprom(adapter);
+ /*
+ * set MAC address to all zeroes to invalidate and temporary
+ * disable this device for the user. This blocks regular
+ * traffic while still permitting ethtool ioctls from reaching
+ * the hardware as well as allowing the user to run the
+ * interface after manually setting a hw addr using
+ * `ip set address`
+ */
+ memset(hw->mac_addr, 0, netdev->addr_len);
+ } else {
+ /* copy the MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw))
+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ }
+ /* don't block initalization here due to bad MAC address */
+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr))
+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+
+ e1000_get_bus_info(hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_ich8lan:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ case e1000_80003es2lan:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82546GB_PCIE:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->quad_port_a = 1;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* print bus type/speed/width info */
+ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
+ (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
+ ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
+ (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
+ (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
+ "32-bit"));
+
+ printk("%pM\n", netdev->dev_addr);
+
+ if (hw->bus_type == e1000_bus_type_pci_express) {
+ DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
+ "longer be supported by this driver in the future.\n",
+ pdev->vendor, pdev->device);
+ DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
+ "driver instead.\n");
+ }
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ // offer device to EtherCAT master module
+ adapter->ecdev = ecdev_offer(netdev, ec_poll, THIS_MODULE);
+ if (adapter->ecdev) {
+ if (ecdev_open(adapter->ecdev)) {
+ ecdev_withdraw(adapter->ecdev);
+ goto err_register;
+ }
+ } else {
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+ }
+
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+ e1000_release_hw_control(adapter);
+err_eeprom:
+ if (!e1000_check_phy_reset_block(hw))
+ e1000_phy_hw_reset(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_flashmap:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev, bars);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ cancel_work_sync(&adapter->reset_task);
+
+ e1000_release_manageability(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ if (adapter->ecdev) {
+ ecdev_close(adapter->ecdev);
+ ecdev_withdraw(adapter->ecdev);
+ } else {
+ unregister_netdev(netdev);
+ }
+
+ if (!e1000_check_phy_reset_block(hw))
+ e1000_phy_hw_reset(hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev, adapter->bars);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ hw->max_frame_size = netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ e1000_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now open */
+ if (hw->mac_type == e1000_82573 &&
+ e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+ return E1000_SUCCESS;
+
+err_req_irq:
+ e1000_release_hw_control(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now closed */
+ if (hw->mac_type == e1000_82573 &&
+ e1000_check_mng_mode(hw))
+ e1000_release_hw_control(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+ unsigned long len)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long begin = (unsigned long)start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (hw->mac_type == e1000_82545 ||
+ hw->mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ }
+
+ return true;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vmalloc(size);
+ if (!txdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(txdr->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ u64 tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tdlen, tctl, tipg, tarc;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ ew32(TDLEN, tdlen);
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+ ew32(TDT, 0);
+ ew32(TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ if (hw->mac_type <= e1000_82547_rev_2 &&
+ (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ case e1000_80003es2lan:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ ew32(TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
+ tarc = er32(TARC0);
+ /* set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later */
+ tarc |= (1 << 21);
+ ew32(TARC0, tarc);
+ } else if (hw->mac_type == e1000_80003es2lan) {
+ tarc = er32(TARC0);
+ tarc |= 1;
+ ew32(TARC0, tarc);
+ tarc = er32(TARC1);
+ tarc |= 1;
+ ew32(TARC1, tarc);
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ ew32(TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vmalloc(size);
+ if (!rxdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->buffer_info, 0, size);
+
+ if (hw->mac_type <= e1000_82547_rev_2)
+ desc_len = sizeof(struct e1000_rx_desc);
+ else
+ desc_len = sizeof(union e1000_rx_desc_packet_split);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_256:
+ rctl |= E1000_RCTL_SZ_256;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_512:
+ rctl |= E1000_RCTL_SZ_512;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_1024:
+ rctl |= E1000_RCTL_SZ_1024;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rdlen, rctl, rxcsum, ctrl_ext;
+
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+
+ if (hw->mac_type >= e1000_82571) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Reset delay timers after every interrupt */
+ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
+ /* Auto-Mask interrupts upon ICR access */
+ ctrl_ext |= E1000_CTRL_EXT_IAME;
+ ew32(IAM, 0xffffffff);
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ ew32(RDLEN, rdlen);
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+ ew32(RDT, 0);
+ ew32(RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = er32(RXCSUM);
+ if (adapter->rx_csum)
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ else
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ ew32(RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (adapter->ecdev)
+ return;
+
+ buffer_info->dma = 0;
+ if (buffer_info->skb) {
+ skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, hw->hw_addr + tx_ring->tdh);
+ writel(0, hw->hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ buffer_info->dma = 0;
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, hw->hw_addr + rx_ring->rdh);
+ writel(0, hw->hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ e1000_pci_clear_mwi(hw);
+
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (!adapter->ecdev && netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+
+ if (!adapter->netdev && netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ if (adapter->ecdev) {
+ /* fill rx ring completely! */
+ adapter->alloc_rx_buf(adapter, ring, ring->count);
+ } else {
+ /* this one leaves the last ring element unallocated! */
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ /* With 82571 controllers, LAA may be overwritten (with the default)
+ * due to controller reset from the other port. */
+ if (hw->mac_type == e1000_82571) {
+ /* activate the work around */
+ hw->laa_is_present = 1;
+
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
+ * of the RARs and no incoming packets directed to this port
+ * are dropped. Eventaully the LAA will be in RAR[0] and
+ * RAR[14] */
+ e1000_rar_set(hw, hw->mac_addr,
+ E1000_RAR_ENTRIES - 1);
+ }
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void e1000_set_rx_mode(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
+ struct dev_addr_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+ E1000_NUM_MTA_REGISTERS_ICH8LAN :
+ E1000_NUM_MTA_REGISTERS;
+ u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
+
+ if (!mcarray) {
+ DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ return;
+ }
+
+ if (hw->mac_type == e1000_ich8lan)
+ rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
+
+ /* reserve RAR[14] for LAA over-write work-around */
+ if (hw->mac_type == e1000_82571)
+ rar_entries--;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ } else {
+ rctl &= ~E1000_RCTL_MPE;
+ }
+ if (adapter->hw.mac_type != e1000_ich8lan)
+ rctl |= E1000_RCTL_VFE;
+ }
+
+ if (netdev->uc.count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+ use_uc = true;
+ }
+
+ ew32(RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 addresses into the exact filters 1-14. Unicast
+ * addresses take precedence to avoid disabling unicast filtering
+ * when possible.
+ *
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
+ */
+ i = 1;
+ if (use_uc)
+ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (i == rar_entries)
+ break;
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+
+ WARN_ON(i == rar_entries);
+
+ mc_ptr = netdev->mc_list;
+
+ for (; i < rar_entries; i++) {
+ if (mc_ptr) {
+ e1000_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH();
+ }
+ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+ u32 hash_reg, hash_bit, mta;
+ hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+ mta = (1 << hash_bit);
+ mcarray[hash_reg] |= mta;
+ }
+
+ /* write the hash table completely, write from bottom to avoid
+ * both stupid write combining chipsets, and flushing each write */
+ for (i = mta_reg_count - 1; i >= 0 ; i--) {
+ /*
+ * If we are on an 82544 has an errata where writing odd
+ * offsets overwrites the previous even offset, but writing
+ * backwards over the range solves the issue by always
+ * writing the odd offset first
+ */
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
+ }
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ kfree(mcarray);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_phy_get_info(hw, &adapter->phy_info);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+static void e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl;
+
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((er32(TDT) == er32(TDH)) &&
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ ew32(TDFT, adapter->tx_head_addr);
+ ew32(TDFH, adapter->tx_head_addr);
+ ew32(TDFTS, adapter->tx_head_addr);
+ ew32(TDFHS, adapter->tx_head_addr);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ if (!adapter->ecdev)
+ netif_wake_queue(netdev);
+ } else {
+ if (!adapter->ecdev)
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ u32 link, tctl;
+ s32 ret_val;
+
+ ret_val = e1000_check_for_link(hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (hw->phy_type == e1000_phy_igp_3) &&
+ (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kumeran_lock_loss_workaround() */
+ DPRINTK(LINK, INFO,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
+
+ if (hw->mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(hw);
+ if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
+ e1000_update_mng_vlan(adapter);
+ }
+
+ if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ !(er32(TXCW) & E1000_TXCW_ANE))
+ link = !hw->serdes_link_down;
+ else
+ link = er32(STATUS) & E1000_STATUS_LU;
+
+ if (link) {
+ if ( (adapter->ecdev && !ecdev_get_link(adapter->ecdev))
+ || (!adapter->ecdev && !netif_carrier_ok(netdev)) ) {
+ u32 ctrl;
+ bool txb2b = true;
+ e1000_get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = er32(CTRL);
+ printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None" )));
+
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = false;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 8;
+ break;
+ case SPEED_100:
+ txb2b = false;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ if ((hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) &&
+ !txb2b) {
+ u32 tarc0;
+ tarc0 = er32(TARC0);
+ tarc0 &= ~(1 << 21);
+ ew32(TARC0, tarc0);
+ }
+
+ /* disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues */
+ if (!adapter->tso_force &&
+ hw->bus_type == e1000_bus_type_pci_express){
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ DPRINTK(PROBE,INFO,
+ "10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ break;
+ default:
+ /* oops */
+ break;
+ }
+ }
+
+ /* enable transmits in the hardware, need to do this
+ * after setting TARC0 */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ if (adapter->ecdev) {
+ ecdev_set_link(adapter->ecdev, 1);
+ } else {
+ netif_carrier_on(netdev);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+ }
+ adapter->smartspeed = 0;
+ } else {
+ /* make sure the receive unit is started */
+ if (hw->rx_needs_kicking) {
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ }
+ }
+ } else {
+ if ( (adapter->ecdev && ecdev_get_link(adapter->ecdev))
+ || (!adapter->ecdev && netif_carrier_ok(netdev)) ) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ printk(KERN_INFO "e1000: %s NIC Link is Down\n",
+ netdev->name);
+ if (adapter->ecdev) {
+ ecdev_set_link(adapter->ecdev, 0);
+ } else {
+ netif_carrier_off(netdev);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+ }
+
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives in the ISR and
+ * reset device here in the watchdog
+ */
+ if (hw->mac_type == e1000_80003es2lan)
+ /* reset device */
+ schedule_work(&adapter->reset_task);
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+ e1000_update_stats(adapter);
+
+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(hw);
+
+ if (!adapter->ecdev && !netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ if (!adapter->ecdev) adapter->detect_tx_hung = true;
+
+ /* With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0] */
+ if (hw->mac_type == e1000_82571 && hw->laa_is_present)
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ /* Reset the timer */
+ if (!adapter->ecdev)
+ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ }
+
+ return;
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return false;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ DPRINTK(DRV, WARNING,
+ "checksum_partial proto=%x!\n", skb->protocol);
+ break;
+ }
+
+ css = skb_transport_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset, size, count = 0, i;
+ unsigned int f;
+ dma_addr_t *map;
+
+ i = tx_ring->next_to_use;
+
+ if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
+ dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+ return 0;
+ }
+
+ map = skb_shinfo(skb)->dma_maps;
+ offset = 0;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = 0;
+
+ while (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(frag->page+offset+size-1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma = map[f] + offset;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, int tx_flags,
+ int count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, hw->hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 length, offset;
+ if (vlan_tx_tag_present(skb)) {
+ if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
+ ( hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
+ return 0;
+ }
+ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
+ struct ethhdr *eth = (struct ethhdr *)skb->data;
+ if ((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
+ (struct iphdr *)((u8 *)skb->data+14);
+ if (IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+ (struct udphdr *)((u8 *)ip +
+ (ip->ihl << 2));
+ if (ntohs(udp->dest) == 67) {
+ offset = (u8 *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return e1000_mng_write_dhcp_info(hw,
+ (u8 *)udp + 8,
+ length);
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len - skb->data_len;
+ unsigned int nr_frags = 0;
+ unsigned int mss = 0;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ if (!adapter->ecdev)
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* 82571 and newer doesn't need the workaround that limited descriptor
+ * length to 4kB */
+ if (hw->mac_type >= e1000_82571)
+ max_per_txd = 8192;
+
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data */
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (skb->data_len && hdr_len == len) {
+ switch (hw->mac_type) {
+ unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
+ break;
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_ich8lan:
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ DPRINTK(DRV, ERR,
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+
+ if (hw->tx_pkt_filtering &&
+ (hw->mac_type == e1000_82573))
+ e1000_transfer_dhcp_info(adapter, skb);
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
+ return NETDEV_TX_BUSY;
+
+ if (unlikely(hw->mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ if (!adapter->ecdev) {
+ netif_stop_queue(netdev);
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ if (!adapter->ecdev) {
+ dev_kfree_skb_any(skb);
+ }
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must. */
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+ nr_frags, mss);
+
+ if (count) {
+ e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+ if (!adapter->ecdev) {
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+ }
+
+ } else {
+ if (!adapter->ecdev) dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
+
+ e1000_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ u16 eeprom_data = 0;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (hw->mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ case e1000_ich8lan:
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ case e1000_82573:
+ /* Jumbo Frames not supported if:
+ * - this is not an 82573L device
+ * - ASPM is enabled in any way (0x1A bits 3:2) */
+ e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
+ &eeprom_data);
+ if ((hw->device_id != E1000_DEV_ID_82573L) ||
+ (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ /* ERT will be enabled later to enable wire speed receives */
+
+ /* fall through to get support */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size
+ * i.e. RXBUFFER_2048 --> size-4096 slab */
+
+ if (max_frame <= E1000_RXBUFFER_256)
+ adapter->rx_buffer_len = E1000_RXBUFFER_256;
+ else if (max_frame <= E1000_RXBUFFER_512)
+ adapter->rx_buffer_len = E1000_RXBUFFER_512;
+ else if (max_frame <= E1000_RXBUFFER_1024)
+ adapter->rx_buffer_len = E1000_RXBUFFER_1024;
+ else if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if (max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if (max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if (max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!hw->tbi_compatibility_on &&
+ ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ netdev->mtu = new_mtu;
+ hw->max_frame_size = max_frame;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags = 0;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ if (!adapter->ecdev)
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_tbi_adjust_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorcl += er32(GORCL);
+ adapter->stats.gorch += er32(GORCH);
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
+ }
+
+ adapter->stats.symerrs += er32(SYMERRS);
+ adapter->stats.mpc += er32(MPC);
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+ adapter->stats.sec += er32(SEC);
+ adapter->stats.rlec += er32(RLEC);
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.fcruc += er32(FCRUC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotcl += er32(GOTCL);
+ adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+ adapter->stats.rfc += er32(RFC);
+ adapter->stats.rjc += er32(RJC);
+ adapter->stats.torl += er32(TORL);
+ adapter->stats.torh += er32(TORH);
+ adapter->stats.totl += er32(TOTL);
+ adapter->stats.toth += er32(TOTH);
+ adapter->stats.tpr += er32(TPR);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
+ }
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = er32(COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.tncrs += er32(TNCRS);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+ }
+ if (hw->mac_type > e1000_82547_rev_2) {
+ adapter->stats.iac += er32(IAC);
+ adapter->stats.icrxoc += er32(ICRXOC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.icrxptc += er32(ICRXPTC);
+ adapter->stats.icrxatc += er32(ICRXATC);
+ adapter->stats.ictxptc += er32(ICTXPTC);
+ adapter->stats.ictxatc += er32(ICTXATC);
+ adapter->stats.ictxqec += er32(ICTXQEC);
+ adapter->stats.ictxqmtc += er32(ICTXQMTC);
+ adapter->stats.icrxdmtc += er32(ICRXDMTC);
+ }
+ }
+
+ /* Fill out the OS statistics structure */
+ adapter->net_stats.multicast = adapter->stats.mprc;
+ adapter->net_stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ adapter->net_stats.tx_errors = adapter->stats.txerrc;
+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (hw->bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ adapter->net_stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ /* Management Stats */
+ if (hw->has_smbus) {
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+ }
+
+ if (!adapter->ecdev)
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+void ec_poll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ if (jiffies - adapter->ec_watchdog_jiffies >= 2 * HZ) {
+ e1000_watchdog((unsigned long) adapter);
+ adapter->ec_watchdog_jiffies = jiffies;
+ }
+#ifdef CONFIG_PCI_MSI
+ e1000_intr_msi(0, netdev);
+#else
+ e1000_intr(0, netdev);
+#endif
+}
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr_msi(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (adapter->ecdev) {
+ int i, ec_work_done = 0;
+ for (i = 0; i < E1000_MAX_INTR; i++) {
+ if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring,
+ &ec_work_done, 100) &
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring))) {
+ break;
+ }
+ }
+ } else {
+ /* in NAPI mode read ICR disables interrupts using IAM */
+
+ if ( !adapter->ecdev && (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) ) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround-- For packet buffer work-around on
+ * link down event; disable receives here in the ISR and reset
+ * adapter in watchdog */
+ if (netif_carrier_ok(netdev) &&
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else
+ e1000_irq_enable(adapter);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl, icr = er32(ICR);
+
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
+ return IRQ_NONE; /* Not our interrupt */
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt */
+ if (unlikely(hw->mac_type >= e1000_82571 &&
+ !(icr & E1000_ICR_INT_ASSERTED)))
+ return IRQ_NONE;
+
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write */
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (unlikely(hw->mac_type < e1000_82571)) {
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ }
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else {
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ * EtherCAT: never called
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct net_device *poll_dev = adapter->netdev;
+ int tx_cleaned = 0, work_done = 0;
+
+ adapter = netdev_priv(poll_dev);
+
+ tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0],
+ &work_done, budget);
+
+ if (!tx_cleaned)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_tx_packets += segs;
+ total_tx_bytes += bytecount;
+ }
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (!adapter->ecdev && unlikely(count && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev)) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (!adapter->ecdev && adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ (adapter->tx_timeout_factor * HZ))
+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[i].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ adapter->net_stats.tx_bytes += total_tx_bytes;
+ adapter->net_stats.tx_packets += total_tx_packets;
+ return (count < tx_ring->count);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* 82543 or newer only */
+ if (unlikely(hw->mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (hw->mac_type <= e1000_82547_rev_2) {
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+ } else {
+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else if (hw->mac_type > e1000_82547_rev_2) {
+ /* IP fragment with UDP payload */
+ /* Hardware complements the payload checksum, so we undo it
+ * and then put the value in host order for further stack use.
+ */
+ __sum16 sum = (__force __sum16)htons(csum);
+ skb->csum = csum_unfold(~sum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ u32 length;
+ u8 last_byte;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ if (!adapter->ecdev) buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, also make sure the frame isn't just CRC only */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+
+ if (!adapter->ecdev &&
+ unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ /* code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack */
+ if (!adapter->ecdev && length < copybreak) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+ if (new_skb) {
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ }
+ /* end copybreak code */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ if (adapter->ecdev) {
+ ecdev_receive(adapter->ecdev, skb->data, length);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ adapter->ec_watchdog_jiffies = jiffies;
+ } else {
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ if (unlikely(adapter->vlgrp &&
+ (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->special));
+ } else {
+ netif_receive_skb(skb);
+ }
+ }
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while !buffer_info->skb */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = pci_map_single(pdev,
+ skb->data,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ if (!adapter->ecdev) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ }
+
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status;
+ u16 phy_ctrl;
+
+ if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ u16 mii_reg;
+ u16 spddplx;
+ unsigned long flags;
+
+ if (hw->media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = hw->phy_addr;
+ break;
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN) || adapter->ecdev)
+ return -EPERM;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN) || adapter->ecdev)
+ return -EPERM;
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ if (hw->media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ hw->autoneg = 1;
+ hw->autoneg_advertised = 0x2F;
+ } else {
+ if (mii_reg & 0x40)
+ spddplx = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ spddplx = SPEED_100;
+ else
+ spddplx = SPEED_10;
+ spddplx += (mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ retval = e1000_set_spd_dplx(adapter,
+ spddplx);
+ if (retval)
+ return retval;
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(hw))
+ return -EIO;
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+}
+
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return pcix_get_mmrbc(adapter->pdev);
+}
+
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+ struct e1000_adapter *adapter = hw->back;
+ pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct e1000_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return E1000_SUCCESS;
+}
+
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+{
+ outl(value, port);
+}
+
+static void e1000_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ }
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ if (adapter->mng_vlan_id !=
+ (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev,
+ adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id)) {
+ /* release control to f/w */
+ e1000_release_hw_control(adapter);
+ return;
+ }
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ u16 vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ hw->autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((hw->media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ hw->autoneg = 1;
+ hw->autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ if (hw->mac_type >= e1000_82540) {
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+ }
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Allow time for pending master requests to run */
+ e1000_disable_pciex_master(hw);
+
+ ew32(WUC, E1000_WUC_PME_EN);
+ ew32(WUFC, wufc);
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ e1000_release_manageability(adapter);
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
+
+ if (hw->phy_type == e1000_phy_igp_3)
+ e1000_phy_powerdown_workaround(hw);
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ if (!adapter->ecdev) netif_device_attach(netdev);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ printk("e1000: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+}
+
+/* e1000_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_main-2.6.31-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,4905 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+#include <net/ip6_checksum.h>
+
+char e1000_driver_name[] = "e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#define DRV_VERSION "7.3.21-k3-NAPI"
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static struct pci_device_id e1000_pci_tbl[] = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_rx_mode(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t e1000_intr(int irq, void *data);
+static irqreturn_t e1000_intr_msi(int irq, void *data);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static int e1000_clean(struct napi_struct *napi, int budget);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ /* Power Managment Hooks */
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init e1000_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ e1000_driver_string, e1000_driver_version);
+
+ printk(KERN_INFO "%s\n", e1000_copyright);
+
+ ret = pci_register_driver(&e1000_driver);
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ printk(KERN_INFO "e1000: copybreak disabled\n");
+ else
+ printk(KERN_INFO "e1000: copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ irq_handler_t handler = e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
+
+ if (hw->mac_type >= e1000_82571) {
+ adapter->have_msi = !pci_enable_msi(adapter->pdev);
+ if (adapter->have_msi) {
+ handler = e1000_intr_msi;
+ irq_flags = 0;
+ }
+ }
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+ }
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH();
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = hw->mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+/**
+ * e1000_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded. For AMT version (only with 82573) i
+ * of the f/w this means that the network i/f is closed.
+ *
+ **/
+
+static void e1000_release_hw_control(struct e1000_adapter *adapter)
+{
+ u32 ctrl_ext;
+ u32 swsm;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Let firmware taken over control of h/w */
+ switch (hw->mac_type) {
+ case e1000_82573:
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * e1000_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
+ * of the f/w this means that the network i/f is open.
+ *
+ **/
+
+static void e1000_get_hw_control(struct e1000_adapter *adapter)
+{
+ u32 ctrl_ext;
+ u32 swsm;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Let firmware know the driver has taken over */
+ switch (hw->mac_type) {
+ case e1000_82573:
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+}
+
+static void e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ /* enable receiving management packets to the host */
+ /* this will probably generate destination unreachable messages
+ * from the host OS, but the packets will be handled on SMBUS */
+ if (hw->has_manc2h) {
+ u32 manc2h = er32(MANC2H);
+
+ manc |= E1000_MANC_EN_MNG2HOST;
+#define E1000_MNG2HOST_PORT_623 (1 << 5)
+#define E1000_MNG2HOST_PORT_664 (1 << 6)
+ manc2h |= E1000_MNG2HOST_PORT_623;
+ manc2h |= E1000_MNG2HOST_PORT_664;
+ ew32(MANC2H, manc2h);
+ }
+
+ ew32(MANC, manc);
+ }
+}
+
+static void e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ if (hw->has_manc2h)
+ manc &= ~E1000_MANC_EN_MNG2HOST;
+
+ /* don't explicitly have to mess with MANC2H since
+ * MANC has an enable disable that gates MANC2H */
+
+ ew32(MANC, manc);
+ }
+}
+
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ e1000_set_rx_mode(netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is true *
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ u16 mii_reg = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (er32(MANC) & E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ if (e1000_check_mng_mode(hw) ||
+ e1000_check_phy_reset_block(hw))
+ goto out;
+ break;
+ default:
+ goto out;
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+out:
+ return;
+}
+
+void e1000_down(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl, tctl;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ /* can be netif_tx_disable when NETIF_F_LLTX is removed */
+ netif_stop_queue(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ napi_disable(&adapter->napi);
+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_carrier_off(netdev);
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+void e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
+ bool legacy_pba_adjust = false;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ pba = E1000_PBA_38K;
+ break;
+ case e1000_82573:
+ pba = E1000_PBA_20K;
+ break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ case e1000_undefined:
+ case e1000_num_macs:
+ break;
+ }
+
+ if (legacy_pba_adjust) {
+ if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+
+ if (hw->mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ /* adjust PBA for jumbo frames */
+ ew32(PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accomodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accomodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* don't include ethernet FCS because hardware appends/strips */
+ min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
+ VLAN_TAG_SIZE;
+ min_tx_space = min_rx_space;
+ min_tx_space *= 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (hw->mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space) {
+ switch (hw->mac_type) {
+ case e1000_82573:
+ /* ERT enabled in e1000_configure_rx */
+ break;
+ default:
+ pba = min_rx_space;
+ break;
+ }
+ }
+ }
+ }
+
+ ew32(PBA, pba);
+
+ /* flow control settings */
+ /* Set the FC high water mark to 90% of the FIFO size.
+ * Required to clear last 3 LSB */
+ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+ /* We can't use 90% on small FIFOs because the remainder
+ * would be less than 1 full frame. In this case, we size
+ * it to allow at least a full frame above the high water
+ * mark. */
+ if (pba < E1000_PBA_16K)
+ fc_high_water_mark = (pba * 1024) - 1600;
+
+ hw->fc_high_water = fc_high_water_mark;
+ hw->fc_low_water = fc_high_water_mark - 8;
+ if (hw->mac_type == e1000_80003es2lan)
+ hw->fc_pause_time = 0xFFFF;
+ else
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544)
+ ew32(WUC, 0);
+
+ if (e1000_init_hw(hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (hw->mac_type >= e1000_82544 &&
+ hw->mac_type <= e1000_82547_rev_2 &&
+ hw->autoneg == 1 &&
+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ u32 ctrl = er32(CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ ew32(CTRL, ctrl);
+ }
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(hw);
+ e1000_phy_get_info(hw, &adapter->phy_info);
+
+ if (!adapter->smart_power_down &&
+ (hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572)) {
+ u16 phy_data = 0;
+ /* speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed */
+ e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
+ e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ }
+
+ e1000_release_manageability(adapter);
+}
+
+/**
+ * Dump the eeprom for users having checksum issues
+ **/
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ethtool_eeprom eeprom;
+ const struct ethtool_ops *ops = netdev->ethtool_ops;
+ u8 *data;
+ int i;
+ u16 csum_old, csum_new = 0;
+
+ eeprom.len = ops->get_eeprom_len(netdev);
+ eeprom.offset = 0;
+
+ data = kmalloc(eeprom.len, GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
+ " data\n");
+ return;
+ }
+
+ ops->get_eeprom(netdev, &eeprom, data);
+
+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
+ csum_new += data[i] + (data[i + 1] << 8);
+ csum_new = EEPROM_SUM - csum_new;
+
+ printk(KERN_ERR "/*********************/\n");
+ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
+ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+
+ printk(KERN_ERR "Offset Values\n");
+ printk(KERN_ERR "======== ======\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
+
+ printk(KERN_ERR "Include this output when contacting your support "
+ "provider.\n");
+ printk(KERN_ERR "This is not a software error! Something bad "
+ "happened to your hardware or\n");
+ printk(KERN_ERR "EEPROM image. Ignoring this "
+ "problem could result in further problems,\n");
+ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
+ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
+ "which is invalid\n");
+ printk(KERN_ERR "and requires you to set the proper MAC "
+ "address manually before continuing\n");
+ printk(KERN_ERR "to enable this network device.\n");
+ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
+ "to your hardware vendor\n");
+ printk(KERN_ERR "or Intel Customer Support.\n");
+ printk(KERN_ERR "/*********************/\n");
+
+ kfree(data);
+}
+
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct net_device_ops e1000_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats = e1000_get_stats,
+ .ndo_set_rx_mode = e1000_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_register = e1000_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+
+ static int cards_found = 0;
+ static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
+ return err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ E1000_ERR("No usable DMA configuration, "
+ "aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
+
+ hw = &adapter->hw;
+ hw->back = adapter;
+
+ err = -EIO;
+ hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ hw->io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+ }
+
+ netdev->netdev_ops = &e1000_netdev_ops;
+ e1000_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ err = -EIO;
+ /* Flash BAR mapping must happen after e1000_sw_init
+ * because it depends on mac_type */
+ if ((hw->mac_type == e1000_ich8lan) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ hw->flash_address = pci_ioremap_bar(pdev, 1);
+ if (!hw->flash_address)
+ goto err_flashmap;
+ }
+
+ if (e1000_check_phy_reset_block(hw))
+ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+
+ if (hw->mac_type >= e1000_82543) {
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ if (hw->mac_type == e1000_ich8lan)
+ netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
+ }
+
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_82547))
+ netdev->features |= NETIF_F_TSO;
+
+ if (hw->mac_type > e1000_82547_rev_2)
+ netdev->features |= NETIF_F_TSO6;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
+
+ /* initialize eeprom parameters */
+ if (e1000_init_eeprom_params(hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(hw);
+
+ /* make sure the EEPROM is good */
+ if (e1000_validate_eeprom_checksum(hw) < 0) {
+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ e1000_dump_eeprom(adapter);
+ /*
+ * set MAC address to all zeroes to invalidate and temporary
+ * disable this device for the user. This blocks regular
+ * traffic while still permitting ethtool ioctls from reaching
+ * the hardware as well as allowing the user to run the
+ * interface after manually setting a hw addr using
+ * `ip set address`
+ */
+ memset(hw->mac_addr, 0, netdev->addr_len);
+ } else {
+ /* copy the MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw))
+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ }
+ /* don't block initalization here due to bad MAC address */
+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr))
+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+
+ e1000_get_bus_info(hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_ich8lan:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ case e1000_80003es2lan:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82546GB_PCIE:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82571EB_FIBER:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->quad_port_a = 1;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* print bus type/speed/width info */
+ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
+ (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
+ ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
+ (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
+ (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
+ "32-bit"));
+
+ printk("%pM\n", netdev->dev_addr);
+
+ if (hw->bus_type == e1000_bus_type_pci_express) {
+ DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
+ "longer be supported by this driver in the future.\n",
+ pdev->vendor, pdev->device);
+ DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
+ "driver instead.\n");
+ }
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+ e1000_release_hw_control(adapter);
+err_eeprom:
+ if (!e1000_check_phy_reset_block(hw))
+ e1000_phy_hw_reset(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_flashmap:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev, bars);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ cancel_work_sync(&adapter->reset_task);
+
+ e1000_release_manageability(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ if (!e1000_check_phy_reset_block(hw))
+ e1000_phy_hw_reset(hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev, adapter->bars);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ hw->max_frame_size = netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ e1000_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now open */
+ if (hw->mac_type == e1000_82573 &&
+ e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+ return E1000_SUCCESS;
+
+err_req_irq:
+ e1000_release_hw_control(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now closed */
+ if (hw->mac_type == e1000_82573 &&
+ e1000_check_mng_mode(hw))
+ e1000_release_hw_control(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+ unsigned long len)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long begin = (unsigned long)start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (hw->mac_type == e1000_82545 ||
+ hw->mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ }
+
+ return true;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vmalloc(size);
+ if (!txdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(txdr->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ u64 tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tdlen, tctl, tipg, tarc;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ ew32(TDLEN, tdlen);
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+ ew32(TDT, 0);
+ ew32(TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ if (hw->mac_type <= e1000_82547_rev_2 &&
+ (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ case e1000_80003es2lan:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ ew32(TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
+ tarc = er32(TARC0);
+ /* set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later */
+ tarc |= (1 << 21);
+ ew32(TARC0, tarc);
+ } else if (hw->mac_type == e1000_80003es2lan) {
+ tarc = er32(TARC0);
+ tarc |= 1;
+ ew32(TARC0, tarc);
+ tarc = er32(TARC1);
+ tarc |= 1;
+ ew32(TARC1, tarc);
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ ew32(TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vmalloc(size);
+ if (!rxdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->buffer_info, 0, size);
+
+ if (hw->mac_type <= e1000_82547_rev_2)
+ desc_len = sizeof(struct e1000_rx_desc);
+ else
+ desc_len = sizeof(union e1000_rx_desc_packet_split);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_256:
+ rctl |= E1000_RCTL_SZ_256;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_512:
+ rctl |= E1000_RCTL_SZ_512;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_1024:
+ rctl |= E1000_RCTL_SZ_1024;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rdlen, rctl, rxcsum, ctrl_ext;
+
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+
+ if (hw->mac_type >= e1000_82571) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Reset delay timers after every interrupt */
+ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
+ /* Auto-Mask interrupts upon ICR access */
+ ctrl_ext |= E1000_CTRL_EXT_IAME;
+ ew32(IAM, 0xffffffff);
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ ew32(RDLEN, rdlen);
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+ ew32(RDT, 0);
+ ew32(RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = er32(RXCSUM);
+ if (adapter->rx_csum)
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ else
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ ew32(RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ buffer_info->dma = 0;
+ if (buffer_info->skb) {
+ skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, hw->hw_addr + tx_ring->tdh);
+ writel(0, hw->hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ buffer_info->dma = 0;
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, hw->hw_addr + rx_ring->rdh);
+ writel(0, hw->hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ e1000_pci_clear_mwi(hw);
+
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+
+ if (netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ /* With 82571 controllers, LAA may be overwritten (with the default)
+ * due to controller reset from the other port. */
+ if (hw->mac_type == e1000_82571) {
+ /* activate the work around */
+ hw->laa_is_present = 1;
+
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
+ * of the RARs and no incoming packets directed to this port
+ * are dropped. Eventaully the LAA will be in RAR[0] and
+ * RAR[14] */
+ e1000_rar_set(hw, hw->mac_addr,
+ E1000_RAR_ENTRIES - 1);
+ }
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void e1000_set_rx_mode(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
+ struct dev_addr_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+ E1000_NUM_MTA_REGISTERS_ICH8LAN :
+ E1000_NUM_MTA_REGISTERS;
+ u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
+
+ if (!mcarray) {
+ DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ return;
+ }
+
+ if (hw->mac_type == e1000_ich8lan)
+ rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
+
+ /* reserve RAR[14] for LAA over-write work-around */
+ if (hw->mac_type == e1000_82571)
+ rar_entries--;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ } else {
+ rctl &= ~E1000_RCTL_MPE;
+ }
+ if (adapter->hw.mac_type != e1000_ich8lan)
+ rctl |= E1000_RCTL_VFE;
+ }
+
+ if (netdev->uc.count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+ use_uc = true;
+ }
+
+ ew32(RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 addresses into the exact filters 1-14. Unicast
+ * addresses take precedence to avoid disabling unicast filtering
+ * when possible.
+ *
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
+ */
+ i = 1;
+ if (use_uc)
+ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (i == rar_entries)
+ break;
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+
+ WARN_ON(i == rar_entries);
+
+ mc_ptr = netdev->mc_list;
+
+ for (; i < rar_entries; i++) {
+ if (mc_ptr) {
+ e1000_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH();
+ }
+ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+ u32 hash_reg, hash_bit, mta;
+ hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+ mta = (1 << hash_bit);
+ mcarray[hash_reg] |= mta;
+ }
+
+ /* write the hash table completely, write from bottom to avoid
+ * both stupid write combining chipsets, and flushing each write */
+ for (i = mta_reg_count - 1; i >= 0 ; i--) {
+ /*
+ * If we are on an 82544 has an errata where writing odd
+ * offsets overwrites the previous even offset, but writing
+ * backwards over the range solves the issue by always
+ * writing the odd offset first
+ */
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
+ }
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ kfree(mcarray);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_phy_get_info(hw, &adapter->phy_info);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+static void e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl;
+
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((er32(TDT) == er32(TDH)) &&
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ ew32(TDFT, adapter->tx_head_addr);
+ ew32(TDFH, adapter->tx_head_addr);
+ ew32(TDFTS, adapter->tx_head_addr);
+ ew32(TDFHS, adapter->tx_head_addr);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ netif_wake_queue(netdev);
+ } else {
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ u32 link, tctl;
+ s32 ret_val;
+
+ ret_val = e1000_check_for_link(hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (hw->phy_type == e1000_phy_igp_3) &&
+ (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kumeran_lock_loss_workaround() */
+ DPRINTK(LINK, INFO,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
+
+ if (hw->mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(hw);
+ if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
+ e1000_update_mng_vlan(adapter);
+ }
+
+ if ((hw->media_type == e1000_media_type_internal_serdes) &&
+ !(er32(TXCW) & E1000_TXCW_ANE))
+ link = !hw->serdes_link_down;
+ else
+ link = er32(STATUS) & E1000_STATUS_LU;
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+ bool txb2b = true;
+ e1000_get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = er32(CTRL);
+ printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None" )));
+
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = false;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 8;
+ break;
+ case SPEED_100:
+ txb2b = false;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ if ((hw->mac_type == e1000_82571 ||
+ hw->mac_type == e1000_82572) &&
+ !txb2b) {
+ u32 tarc0;
+ tarc0 = er32(TARC0);
+ tarc0 &= ~(1 << 21);
+ ew32(TARC0, tarc0);
+ }
+
+ /* disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues */
+ if (!adapter->tso_force &&
+ hw->bus_type == e1000_bus_type_pci_express){
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ DPRINTK(PROBE,INFO,
+ "10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ break;
+ default:
+ /* oops */
+ break;
+ }
+ }
+
+ /* enable transmits in the hardware, need to do this
+ * after setting TARC0 */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ netif_carrier_on(netdev);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+ adapter->smartspeed = 0;
+ } else {
+ /* make sure the receive unit is started */
+ if (hw->rx_needs_kicking) {
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ }
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ printk(KERN_INFO "e1000: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives in the ISR and
+ * reset device here in the watchdog
+ */
+ if (hw->mac_type == e1000_80003es2lan)
+ /* reset device */
+ schedule_work(&adapter->reset_task);
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+ e1000_update_stats(adapter);
+
+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = true;
+
+ /* With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0] */
+ if (hw->mac_type == e1000_82571 && hw->laa_is_present)
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ /* Reset the timer */
+ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ }
+
+ return;
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return false;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ DPRINTK(DRV, WARNING,
+ "checksum_partial proto=%x!\n", skb->protocol);
+ break;
+ }
+
+ css = skb_transport_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset, size, count = 0, i;
+ unsigned int f;
+ dma_addr_t *map;
+
+ i = tx_ring->next_to_use;
+
+ if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
+ dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+ return 0;
+ }
+
+ map = skb_shinfo(skb)->dma_maps;
+ offset = 0;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = 0;
+
+ while (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(frag->page+offset+size-1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma = map[f] + offset;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, int tx_flags,
+ int count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, hw->hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 length, offset;
+ if (vlan_tx_tag_present(skb)) {
+ if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
+ ( hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
+ return 0;
+ }
+ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
+ struct ethhdr *eth = (struct ethhdr *)skb->data;
+ if ((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
+ (struct iphdr *)((u8 *)skb->data+14);
+ if (IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+ (struct udphdr *)((u8 *)ip +
+ (ip->ihl << 2));
+ if (ntohs(udp->dest) == 67) {
+ offset = (u8 *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return e1000_mng_write_dhcp_info(hw,
+ (u8 *)udp + 8,
+ length);
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len - skb->data_len;
+ unsigned int nr_frags;
+ unsigned int mss;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /* 82571 and newer doesn't need the workaround that limited descriptor
+ * length to 4kB */
+ if (hw->mac_type >= e1000_82571)
+ max_per_txd = 8192;
+
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data */
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (skb->data_len && hdr_len == len) {
+ switch (hw->mac_type) {
+ unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
+ break;
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_ich8lan:
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ DPRINTK(DRV, ERR,
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+
+ if (hw->tx_pkt_filtering &&
+ (hw->mac_type == e1000_82573))
+ e1000_transfer_dhcp_info(adapter, skb);
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
+ return NETDEV_TX_BUSY;
+
+ if (unlikely(hw->mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ netif_stop_queue(netdev);
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must. */
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+ nr_frags, mss);
+
+ if (count) {
+ e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
+
+ e1000_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ u16 eeprom_data = 0;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (hw->mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ case e1000_ich8lan:
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ case e1000_82573:
+ /* Jumbo Frames not supported if:
+ * - this is not an 82573L device
+ * - ASPM is enabled in any way (0x1A bits 3:2) */
+ e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
+ &eeprom_data);
+ if ((hw->device_id != E1000_DEV_ID_82573L) ||
+ (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ /* ERT will be enabled later to enable wire speed receives */
+
+ /* fall through to get support */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size
+ * i.e. RXBUFFER_2048 --> size-4096 slab */
+
+ if (max_frame <= E1000_RXBUFFER_256)
+ adapter->rx_buffer_len = E1000_RXBUFFER_256;
+ else if (max_frame <= E1000_RXBUFFER_512)
+ adapter->rx_buffer_len = E1000_RXBUFFER_512;
+ else if (max_frame <= E1000_RXBUFFER_1024)
+ adapter->rx_buffer_len = E1000_RXBUFFER_1024;
+ else if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if (max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if (max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if (max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!hw->tbi_compatibility_on &&
+ ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ netdev->mtu = new_mtu;
+ hw->max_frame_size = max_frame;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_tbi_adjust_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorcl += er32(GORCL);
+ adapter->stats.gorch += er32(GORCH);
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
+ }
+
+ adapter->stats.symerrs += er32(SYMERRS);
+ adapter->stats.mpc += er32(MPC);
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+ adapter->stats.sec += er32(SEC);
+ adapter->stats.rlec += er32(RLEC);
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.fcruc += er32(FCRUC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotcl += er32(GOTCL);
+ adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+ adapter->stats.rfc += er32(RFC);
+ adapter->stats.rjc += er32(RJC);
+ adapter->stats.torl += er32(TORL);
+ adapter->stats.torh += er32(TORH);
+ adapter->stats.totl += er32(TOTL);
+ adapter->stats.toth += er32(TOTH);
+ adapter->stats.tpr += er32(TPR);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
+ }
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = er32(COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.tncrs += er32(TNCRS);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+ }
+ if (hw->mac_type > e1000_82547_rev_2) {
+ adapter->stats.iac += er32(IAC);
+ adapter->stats.icrxoc += er32(ICRXOC);
+
+ if (hw->mac_type != e1000_ich8lan) {
+ adapter->stats.icrxptc += er32(ICRXPTC);
+ adapter->stats.icrxatc += er32(ICRXATC);
+ adapter->stats.ictxptc += er32(ICTXPTC);
+ adapter->stats.ictxatc += er32(ICTXATC);
+ adapter->stats.ictxqec += er32(ICTXQEC);
+ adapter->stats.ictxqmtc += er32(ICTXQMTC);
+ adapter->stats.icrxdmtc += er32(ICRXDMTC);
+ }
+ }
+
+ /* Fill out the OS statistics structure */
+ adapter->net_stats.multicast = adapter->stats.mprc;
+ adapter->net_stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ adapter->net_stats.tx_errors = adapter->stats.txerrc;
+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (hw->bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ adapter->net_stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ /* Management Stats */
+ if (hw->has_smbus) {
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+ }
+
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr_msi(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ /* in NAPI mode read ICR disables interrupts using IAM */
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround-- For packet buffer work-around on
+ * link down event; disable receives here in the ISR and reset
+ * adapter in watchdog */
+ if (netif_carrier_ok(netdev) &&
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else
+ e1000_irq_enable(adapter);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl, icr = er32(ICR);
+
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
+ return IRQ_NONE; /* Not our interrupt */
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt */
+ if (unlikely(hw->mac_type >= e1000_82571 &&
+ !(icr & E1000_ICR_INT_ASSERTED)))
+ return IRQ_NONE;
+
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write */
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (hw->mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (unlikely(hw->mac_type < e1000_82571)) {
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ }
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else {
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct net_device *poll_dev = adapter->netdev;
+ int tx_cleaned = 0, work_done = 0;
+
+ adapter = netdev_priv(poll_dev);
+
+ tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0],
+ &work_done, budget);
+
+ if (!tx_cleaned)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_tx_packets += segs;
+ total_tx_bytes += bytecount;
+ }
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (unlikely(count && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev)) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ (adapter->tx_timeout_factor * HZ))
+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[i].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ adapter->net_stats.tx_bytes += total_tx_bytes;
+ adapter->net_stats.tx_packets += total_tx_packets;
+ return (count < tx_ring->count);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* 82543 or newer only */
+ if (unlikely(hw->mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (hw->mac_type <= e1000_82547_rev_2) {
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+ } else {
+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else if (hw->mac_type > e1000_82547_rev_2) {
+ /* IP fragment with UDP payload */
+ /* Hardware complements the payload checksum, so we undo it
+ * and then put the value in host order for further stack use.
+ */
+ __sum16 sum = (__force __sum16)htons(csum);
+ skb->csum = csum_unfold(~sum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ u32 length;
+ u8 last_byte;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, also make sure the frame isn't just CRC only */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+
+ if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ /* code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack */
+ if (length < copybreak) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+ if (new_skb) {
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ }
+ /* end copybreak code */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ if (unlikely(adapter->vlgrp &&
+ (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->special));
+ } else {
+ netif_receive_skb(skb);
+ }
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while !buffer_info->skb */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = pci_map_single(pdev,
+ skb->data,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status;
+ u16 phy_ctrl;
+
+ if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ u16 mii_reg;
+ u16 spddplx;
+ unsigned long flags;
+
+ if (hw->media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = hw->phy_addr;
+ break;
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ if (hw->media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ hw->autoneg = 1;
+ hw->autoneg_advertised = 0x2F;
+ } else {
+ if (mii_reg & 0x40)
+ spddplx = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ spddplx = SPEED_100;
+ else
+ spddplx = SPEED_10;
+ spddplx += (mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ retval = e1000_set_spd_dplx(adapter,
+ spddplx);
+ if (retval)
+ return retval;
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(hw))
+ return -EIO;
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+}
+
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return pcix_get_mmrbc(adapter->pdev);
+}
+
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+ struct e1000_adapter *adapter = hw->back;
+ pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct e1000_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return E1000_SUCCESS;
+}
+
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+{
+ outl(value, port);
+}
+
+static void e1000_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ }
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ if (adapter->mng_vlan_id !=
+ (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev,
+ adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id)) {
+ /* release control to f/w */
+ e1000_release_hw_control(adapter);
+ return;
+ }
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ u16 vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ hw->autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((hw->media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ hw->autoneg = 1;
+ hw->autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ if (hw->mac_type >= e1000_82540) {
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+ }
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Allow time for pending master requests to run */
+ e1000_disable_pciex_master(hw);
+
+ ew32(WUC, E1000_WUC_PME_EN);
+ ew32(WUFC, wufc);
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ e1000_release_manageability(adapter);
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
+
+ if (hw->phy_type == e1000_phy_igp_3)
+ e1000_phy_powerdown_workaround(hw);
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ netif_device_attach(netdev);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ printk("e1000: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (hw->mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(hw))
+ e1000_get_hw_control(adapter);
+
+}
+
+/* e1000_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_main-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,4894 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ vim: noexpandtab
+
+*******************************************************************************/
+
+#include "e1000-2.6.33-ethercat.h"
+#include <net/ip6_checksum.h>
+
+char e1000_driver_name[] = "ec_e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#define DRV_VERSION "7.3.21-k5-NAPI"
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static struct pci_device_id e1000_pci_tbl[] = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ /* required last entry */
+ {0,}
+};
+
+// do not auto-load driver
+// MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_rx_mode(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+void ec_poll(struct net_device *);
+static irqreturn_t e1000_intr(int irq, void *data);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static int e1000_clean(struct napi_struct *napi, int budget);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ /* Power Managment Hooks */
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT-capable Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init e1000_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ e1000_driver_string, e1000_driver_version);
+
+ printk(KERN_INFO "%s\n", e1000_copyright);
+
+ ret = pci_register_driver(&e1000_driver);
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ printk(KERN_INFO "e1000: copybreak disabled\n");
+ else
+ printk(KERN_INFO "e1000: copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irq_handler_t handler = e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
+
+ if (adapter->ecdev)
+ return 0;
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+ }
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ if (adapter->ecdev)
+ return;
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->ecdev)
+ return;
+
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->ecdev)
+ return;
+
+ ew32(IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH();
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = hw->mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+static void e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ ew32(MANC, manc);
+ }
+}
+
+static void e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ ew32(MANC, manc);
+ }
+}
+
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ e1000_set_rx_mode(netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ if (adapter->ecdev) {
+ /* fill rx ring completely! */
+ adapter->alloc_rx_buf(adapter, ring, ring->count);
+ } else {
+ /* this one leaves the last ring element unallocated! */
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+ }
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ if (!adapter->ecdev) {
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+ }
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is true *
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ u16 mii_reg = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (er32(MANC) & E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ default:
+ goto out;
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+out:
+ return;
+}
+
+void e1000_down(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl, tctl;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ if (!adapter->ecdev) {
+ /* flush and sleep below */
+ netif_tx_disable(netdev);
+ }
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ if (!adapter->ecdev) {
+ napi_disable(&adapter->napi);
+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+ }
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ if (!adapter->ecdev) {
+ netif_carrier_off(netdev);
+ }
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+void e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ bool legacy_pba_adjust = false;
+ u16 hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_undefined:
+ case e1000_num_macs:
+ break;
+ }
+
+ if (legacy_pba_adjust) {
+ if (hw->max_frame_size > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+
+ if (hw->mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /* adjust PBA for jumbo frames */
+ ew32(PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /*
+ * the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (hw->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = hw->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (hw->mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ }
+
+ ew32(PBA, pba);
+
+ /*
+ * flow control settings:
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - hw->max_frame_size));
+
+ hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ hw->fc_low_water = hw->fc_high_water - 8;
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544)
+ ew32(WUC, 0);
+
+ if (e1000_init_hw(hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (hw->mac_type >= e1000_82544 &&
+ hw->autoneg == 1 &&
+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ u32 ctrl = er32(CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ ew32(CTRL, ctrl);
+ }
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(hw);
+ e1000_phy_get_info(hw, &adapter->phy_info);
+
+ e1000_release_manageability(adapter);
+}
+
+/**
+ * Dump the eeprom for users having checksum issues
+ **/
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ethtool_eeprom eeprom;
+ const struct ethtool_ops *ops = netdev->ethtool_ops;
+ u8 *data;
+ int i;
+ u16 csum_old, csum_new = 0;
+
+ eeprom.len = ops->get_eeprom_len(netdev);
+ eeprom.offset = 0;
+
+ data = kmalloc(eeprom.len, GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
+ " data\n");
+ return;
+ }
+
+ ops->get_eeprom(netdev, &eeprom, data);
+
+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
+ csum_new += data[i] + (data[i + 1] << 8);
+ csum_new = EEPROM_SUM - csum_new;
+
+ printk(KERN_ERR "/*********************/\n");
+ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
+ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+
+ printk(KERN_ERR "Offset Values\n");
+ printk(KERN_ERR "======== ======\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
+
+ printk(KERN_ERR "Include this output when contacting your support "
+ "provider.\n");
+ printk(KERN_ERR "This is not a software error! Something bad "
+ "happened to your hardware or\n");
+ printk(KERN_ERR "EEPROM image. Ignoring this "
+ "problem could result in further problems,\n");
+ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
+ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
+ "which is invalid\n");
+ printk(KERN_ERR "and requires you to set the proper MAC "
+ "address manually before continuing\n");
+ printk(KERN_ERR "to enable this network device.\n");
+ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
+ "to your hardware vendor\n");
+ printk(KERN_ERR "or Intel Customer Support.\n");
+ printk(KERN_ERR "/*********************/\n");
+
+ kfree(data);
+}
+
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct net_device_ops e1000_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats = e1000_get_stats,
+ .ndo_set_rx_mode = e1000_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_register = e1000_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+
+ static int cards_found = 0;
+ static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
+ return err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ E1000_ERR("No usable DMA configuration, "
+ "aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
+
+ hw = &adapter->hw;
+ hw->back = adapter;
+
+ err = -EIO;
+ hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ hw->io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+ }
+
+ netdev->netdev_ops = &e1000_netdev_ops;
+ e1000_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ err = -EIO;
+
+ if (hw->mac_type >= e1000_82543) {
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ }
+
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_82547))
+ netdev->features |= NETIF_F_TSO;
+
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
+
+ /* initialize eeprom parameters */
+ if (e1000_init_eeprom_params(hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(hw);
+
+ /* make sure the EEPROM is good */
+ if (e1000_validate_eeprom_checksum(hw) < 0) {
+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ e1000_dump_eeprom(adapter);
+ /*
+ * set MAC address to all zeroes to invalidate and temporary
+ * disable this device for the user. This blocks regular
+ * traffic while still permitting ethtool ioctls from reaching
+ * the hardware as well as allowing the user to run the
+ * interface after manually setting a hw addr using
+ * `ip set address`
+ */
+ memset(hw->mac_addr, 0, netdev->addr_len);
+ } else {
+ /* copy the MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw))
+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ }
+ /* don't block initalization here due to bad MAC address */
+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr))
+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+
+ e1000_get_bus_info(hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82546GB_PCIE:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->quad_port_a = 1;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* print bus type/speed/width info */
+ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+ ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
+
+ printk("%pM\n", netdev->dev_addr);
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ // offer device to EtherCAT master module
+ adapter->ecdev = ecdev_offer(netdev, ec_poll, THIS_MODULE);
+ if (adapter->ecdev) {
+ if (ecdev_open(adapter->ecdev)) {
+ ecdev_withdraw(adapter->ecdev);
+ goto err_register;
+ }
+ } else {
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+ }
+
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+err_eeprom:
+ e1000_phy_hw_reset(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev, bars);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ if (!adapter->ecdev) {
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+ }
+
+ cancel_work_sync(&adapter->reset_task);
+
+ e1000_release_manageability(adapter);
+
+ if (adapter->ecdev) {
+ ecdev_close(adapter->ecdev);
+ ecdev_withdraw(adapter->ecdev);
+ } else {
+ unregister_netdev(netdev);
+ }
+
+ e1000_phy_hw_reset(hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev, adapter->bars);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ hw->max_frame_size = netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ e1000_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+ return E1000_SUCCESS;
+
+err_req_irq:
+ e1000_power_down_phy(adapter);
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+ unsigned long len)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long begin = (unsigned long)start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (hw->mac_type == e1000_82545 ||
+ hw->mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ }
+
+ return true;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vmalloc(size);
+ if (!txdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(txdr->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ u64 tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tdlen, tctl, tipg;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ ew32(TDLEN, tdlen);
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+ ew32(TDT, 0);
+ ew32(TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ if ((hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ ew32(TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ ew32(TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vmalloc(size);
+ if (!rxdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->buffer_info, 0, size);
+
+ desc_len = sizeof(struct e1000_rx_desc);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+ rxdr->rx_skb_top = NULL;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rdlen, rctl, rxcsum;
+
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+ } else {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ ew32(RDLEN, rdlen);
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+ ew32(RDT, 0);
+ ew32(RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = er32(RXCSUM);
+ if (adapter->rx_csum)
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ else
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ ew32(RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (adapter->ecdev)
+ return;
+
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ pci_unmap_page(adapter->pdev, buffer_info->dma,
+ buffer_info->length, PCI_DMA_TODEVICE);
+ else
+ pci_unmap_single(adapter->pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, hw->hw_addr + tx_ring->tdh);
+ writel(0, hw->hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_rx_irq) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ } else if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
+ pci_unmap_page(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ buffer_info->dma = 0;
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->rx_skb_top) {
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, hw->hw_addr + rx_ring->rdh);
+ writel(0, hw->hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ e1000_pci_clear_mwi(hw);
+
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (!adapter->ecdev && netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+
+ if (!adapter->netdev && netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ if (adapter->ecdev) {
+ /* fill rx ring completely! */
+ adapter->alloc_rx_buf(adapter, ring, ring->count);
+ } else {
+ /* this one leaves the last ring element unallocated! */
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void e1000_set_rx_mode(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
+ struct dev_addr_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = E1000_NUM_MTA_REGISTERS;
+ u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
+
+ if (!mcarray) {
+ DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ return;
+ }
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI)
+ rctl |= E1000_RCTL_MPE;
+ else
+ rctl &= ~E1000_RCTL_MPE;
+ /* Enable VLAN filter if there is a VLAN */
+ if (adapter->vlgrp)
+ rctl |= E1000_RCTL_VFE;
+ }
+
+ if (netdev->uc.count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+ use_uc = true;
+ }
+
+ ew32(RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 addresses into the exact filters 1-14. Unicast
+ * addresses take precedence to avoid disabling unicast filtering
+ * when possible.
+ *
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ */
+ i = 1;
+ if (use_uc)
+ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (i == rar_entries)
+ break;
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+
+ WARN_ON(i == rar_entries);
+
+ mc_ptr = netdev->mc_list;
+
+ for (; i < rar_entries; i++) {
+ if (mc_ptr) {
+ e1000_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH();
+ }
+ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+ u32 hash_reg, hash_bit, mta;
+ hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+ mta = (1 << hash_bit);
+ mcarray[hash_reg] |= mta;
+ }
+
+ /* write the hash table completely, write from bottom to avoid
+ * both stupid write combining chipsets, and flushing each write */
+ for (i = mta_reg_count - 1; i >= 0 ; i--) {
+ /*
+ * If we are on an 82544 has an errata where writing odd
+ * offsets overwrites the previous even offset, but writing
+ * backwards over the range solves the issue by always
+ * writing the odd offset first
+ */
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
+ }
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ kfree(mcarray);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_phy_get_info(hw, &adapter->phy_info);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+static void e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl;
+
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((er32(TDT) == er32(TDH)) &&
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ ew32(TDFT, adapter->tx_head_addr);
+ ew32(TDFH, adapter->tx_head_addr);
+ ew32(TDFTS, adapter->tx_head_addr);
+ ew32(TDFHS, adapter->tx_head_addr);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ if (!adapter->ecdev) netif_wake_queue(netdev);
+ } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+ if (!adapter->ecdev)
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+}
+
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->media_type) {
+ case e1000_media_type_copper:
+ if (hw->get_link_status) {
+ e1000_check_for_link(hw);
+ link_active = !hw->get_link_status;
+ } else {
+ link_active = true;
+ }
+ break;
+ case e1000_media_type_fiber:
+ e1000_check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ e1000_check_for_link(hw);
+ link_active = hw->serdes_has_link;
+ break;
+ default:
+ break;
+ }
+
+ return link_active;
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ u32 link, tctl;
+
+ link = e1000_has_link(adapter);
+ if (!adapter->ecdev && (netif_carrier_ok(netdev)) && link)
+ goto link_up;
+
+ if (link) {
+ if ((adapter->ecdev && !ecdev_get_link(adapter->ecdev))
+ || (!adapter->ecdev && !netif_carrier_ok(netdev))) {
+ u32 ctrl;
+ bool txb2b = true;
+ /* update snapshot of PHY registers on LSC */
+ e1000_get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = er32(CTRL);
+ printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None" )));
+
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = false;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 16;
+ break;
+ case SPEED_100:
+ txb2b = false;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ /* enable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ if (adapter->ecdev) {
+ ecdev_set_link(adapter->ecdev, 1);
+ } else {
+ netif_carrier_on(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ adapter->smartspeed = 0;
+ }
+ } else {
+ if ((adapter->ecdev && ecdev_get_link(adapter->ecdev))
+ || (!adapter->ecdev && netif_carrier_ok(netdev))) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ printk(KERN_INFO "e1000: %s NIC Link is Down\n",
+ netdev->name);
+ if (adapter->ecdev) {
+ ecdev_set_link(adapter->ecdev, 0);
+ } else {
+ netif_carrier_off(netdev);
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+link_up:
+ e1000_update_stats(adapter);
+
+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(hw);
+
+ if (!adapter->ecdev && !netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ if (!adapter->ecdev) adapter->detect_tx_hung = true;
+
+ /* Reset the timer */
+ if (!adapter->ecdev) {
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ }
+
+ return;
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return false;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ DPRINTK(DRV, WARNING,
+ "checksum_partial proto=%x!\n", skb->protocol);
+ break;
+ }
+
+ css = skb_transport_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = pci_map_single(pdev, skb->data + offset,
+ size, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(page_to_phys(frag->page) + offset
+ + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = pci_map_page(pdev, frag->page,
+ offset, size,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, int tx_flags,
+ int count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, hw->hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len - skb->data_len;
+ unsigned int nr_frags = 0;
+ unsigned int mss = 0;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ if (!adapter->ecdev)
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (skb->data_len && hdr_len == len) {
+ switch (hw->mac_type) {
+ unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
+ break;
+ /* fall through */
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ DPRINTK(DRV, ERR,
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
+ return NETDEV_TX_BUSY;
+
+ if (unlikely(hw->mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ if (!adapter->ecdev) {
+ netif_stop_queue(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->tx_fifo_stall_timer,
+ jiffies + 1);
+ }
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ if (!adapter->ecdev) {
+ dev_kfree_skb_any(skb);
+ }
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ if (likely(hw->mac_type != e1000_82544))
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+ nr_frags, mss);
+
+ if (count) {
+ e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+ if (!adapter->ecdev) {
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+ }
+
+ } else {
+ if (!adapter->ecdev) dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
+
+ e1000_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+ /* only return the current stats */
+ return &netdev->stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (hw->mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ /* e1000_down has a dependency on max_frame_size */
+ hw->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ e1000_down(adapter);
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * however with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs */
+
+ if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else
+#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+#elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = PAGE_SIZE;
+#endif
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!hw->tbi_compatibility_on &&
+ ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
+ netdev->name, netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+ else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags = 0;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ if (!adapter->ecdev)
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_tbi_adjust_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorcl += er32(GORCL);
+ adapter->stats.gorch += er32(GORCH);
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
+
+ adapter->stats.symerrs += er32(SYMERRS);
+ adapter->stats.mpc += er32(MPC);
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+ adapter->stats.sec += er32(SEC);
+ adapter->stats.rlec += er32(RLEC);
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.fcruc += er32(FCRUC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotcl += er32(GOTCL);
+ adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+ adapter->stats.rfc += er32(RFC);
+ adapter->stats.rjc += er32(RJC);
+ adapter->stats.torl += er32(TORL);
+ adapter->stats.torh += er32(TORH);
+ adapter->stats.totl += er32(TOTL);
+ adapter->stats.toth += er32(TOTH);
+ adapter->stats.tpr += er32(TPR);
+
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = er32(COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.tncrs += er32(TNCRS);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+ }
+
+ /* Fill out the OS statistics structure */
+ netdev->stats.multicast = adapter->stats.mprc;
+ netdev->stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ netdev->stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ netdev->stats.rx_length_errors = adapter->stats.rlerrc;
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ netdev->stats.tx_errors = adapter->stats.txerrc;
+ netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+ netdev->stats.tx_window_errors = adapter->stats.latecol;
+ netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (hw->bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ netdev->stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ /* Management Stats */
+ if (hw->has_smbus) {
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+ }
+
+ if (!adapter->ecdev)
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+void ec_poll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ if (jiffies - adapter->ec_watchdog_jiffies >= 2 * HZ) {
+ e1000_watchdog((unsigned long) adapter);
+ adapter->ec_watchdog_jiffies = jiffies;
+ }
+
+ e1000_intr(0, netdev);
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
+ return IRQ_NONE; /* Not our interrupt */
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (adapter->ecdev) {
+ int i, ec_work_done = 0;
+ for (i = 0; i < E1000_MAX_INTR; i++) {
+ if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring,
+ &ec_work_done, 100) &
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring))) {
+ break;
+ }
+ }
+ } else {
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else {
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ * EtherCAT: never called
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ int tx_clean_complete = 0, work_done = 0;
+
+ tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
+
+ if (!tx_clean_complete)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_tx_packets += segs;
+ total_tx_bytes += bytecount;
+ }
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (!adapter->ecdev && unlikely(count && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__E1000_DOWN, &adapter->flags))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (!adapter->ecdev && adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ netdev->stats.tx_bytes += total_tx_bytes;
+ netdev->stats.tx_packets += total_tx_packets;
+ return (count < tx_ring->count);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* 82543 or newer only */
+ if (unlikely(hw->mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+ u16 length)
+{
+ bi->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ */
+static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
+ __le16 vlan, struct sk_buff *skb)
+{
+ if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_receive_skb(skb);
+ }
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ */
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long irq_flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ if (!adapter->ecdev) buffer_info->skb = NULL;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_page(pdev, buffer_info->dma, buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* errors is only valid for DD + EOP descriptors */
+ if (!adapter->ecdev &&
+ unlikely((status & E1000_RXD_STAT_EOP) &&
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock,
+ irq_flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ irq_flags);
+ length--;
+ } else {
+ /* recycle both page and skb */
+ buffer_info->skb = skb;
+ /* an error means any chain goes out the window
+ * too */
+ if (rx_ring->rx_skb_top)
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ goto next_desc;
+ }
+ }
+
+#define rxtop rx_ring->rx_skb_top
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ /* this is the beginning of a chain */
+ rxtop = skb;
+ skb_fill_page_desc(rxtop, 0, buffer_info->page,
+ 0, length);
+ } else {
+ /* this is the middle of a chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the skb, only consumed the page */
+ buffer_info->skb = skb;
+ }
+ e1000_consume_page(buffer_info, rxtop, length);
+ goto next_desc;
+ } else {
+ if (rxtop) {
+ /* end of the chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the current skb, we only consumed the
+ * page */
+ buffer_info->skb = skb;
+ skb = rxtop;
+ rxtop = NULL;
+ e1000_consume_page(buffer_info, skb, length);
+ } else {
+ /* no chain, got EOP, this buf is the packet
+ * copybreak to save the put_page/alloc_page */
+ if (length <= copybreak &&
+ skb_tailroom(skb) >= length) {
+ u8 *vaddr;
+ vaddr = kmap_atomic(buffer_info->page,
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr, length);
+ kunmap_atomic(vaddr,
+ KM_SKB_DATA_SOFTIRQ);
+ /* re-use the page, so don't erase
+ * buffer_info->page */
+ skb_put(skb, length);
+ } else {
+ skb_fill_page_desc(skb, 0,
+ buffer_info->page, 0,
+ length);
+ e1000_consume_page(buffer_info, skb,
+ length);
+ }
+ }
+ }
+
+ /* Receive Checksum Offload XXX recompute due to CRC strip? */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ pskb_trim(skb, skb->len - 4);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /* eth type trans needs skb->data to point to something */
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ DPRINTK(DRV, ERR, "pskb_may_pull failed.\n");
+ if (!adapter->ecdev) dev_kfree_skb(skb);
+ goto next_desc;
+ }
+
+ if (adapter->ecdev) {
+ ecdev_receive(adapter->ecdev, skb->data, length);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ adapter->ec_watchdog_jiffies = jiffies;
+ } else {
+ skb->protocol = eth_type_trans(skb, netdev);
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+ }
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ */
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ if (!adapter->ecdev) buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_single(pdev, buffer_info->dma, buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, if thats the case we need to toss it. In fact, we
+ * to toss every packet with the EOP bit clear and the next
+ * frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->discarding = true;
+
+ if (adapter->discarding) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ /* recycle */
+ buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->discarding = false;
+ goto next_desc;
+ }
+
+ if (!adapter->ecdev &&
+ unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ /* code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack */
+ if (!adapter->ecdev && length < copybreak) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb_ip_align(netdev, length);
+ if (new_skb) {
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ }
+ /* end copybreak code */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ if (adapter->ecdev) {
+ ecdev_receive(adapter->ecdev, skb->data, length);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ adapter->ec_watchdog_jiffies = jiffies;
+ } else {
+ skb->protocol = eth_type_trans(skb, netdev);
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+ }
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void
+e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring, int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto check_page;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while (cleaned_count--) */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+check_page:
+ /* allocate a new page if necessary */
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (unlikely(!buffer_info->page)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
+
+ if (!buffer_info->dma) {
+ buffer_info->dma = pci_map_page(pdev,
+ buffer_info->page, 0,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ put_page(buffer_info->page);
+ dev_kfree_skb(skb);
+ buffer_info->page = NULL;
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ }
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = pci_map_single(pdev,
+ skb->data,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /*
+ * XXX if it was allocated cleanly it will never map to a
+ * boundary crossing
+ */
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ if (!adapter->ecdev) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ }
+
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status;
+ u16 phy_ctrl;
+
+ if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ u16 mii_reg;
+ u16 spddplx;
+ unsigned long flags;
+
+ if (hw->media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = hw->phy_addr;
+ break;
+ case SIOCGMIIREG:
+ if (adapter->ecdev) return -EPERM;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (adapter->ecdev) return -EPERM;
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ if (hw->media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ hw->autoneg = 1;
+ hw->autoneg_advertised = 0x2F;
+ } else {
+ if (mii_reg & 0x40)
+ spddplx = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ spddplx = SPEED_100;
+ else
+ spddplx = SPEED_10;
+ spddplx += (mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ retval = e1000_set_spd_dplx(adapter,
+ spddplx);
+ if (retval)
+ return retval;
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(hw))
+ return -EIO;
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+}
+
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return pcix_get_mmrbc(adapter->pdev);
+}
+
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+ struct e1000_adapter *adapter = hw->back;
+ pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+{
+ outl(value, port);
+}
+
+static void e1000_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ if (!(netdev->flags & IFF_PROMISC))
+ rctl |= E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ u16 vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ hw->autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((hw->media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ hw->autoneg = 1;
+ hw->autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ if (hw->mac_type >= e1000_82540) {
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+ }
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ ew32(WUC, E1000_WUC_PME_EN);
+ ew32(WUFC, wufc);
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ e1000_release_manageability(adapter);
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ if (adapter->ecdev)
+ return -EBUSY;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ if (!adapter->ecdev) netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ printk("e1000: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+/* e1000_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_main-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,4764 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+#include <net/ip6_checksum.h>
+
+char e1000_driver_name[] = "e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#define DRV_VERSION "7.3.21-k5-NAPI"
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static struct pci_device_id e1000_pci_tbl[] = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_rx_mode(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t e1000_intr(int irq, void *data);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static int e1000_clean(struct napi_struct *napi, int budget);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ /* Power Managment Hooks */
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init e1000_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ e1000_driver_string, e1000_driver_version);
+
+ printk(KERN_INFO "%s\n", e1000_copyright);
+
+ ret = pci_register_driver(&e1000_driver);
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ printk(KERN_INFO "e1000: copybreak disabled\n");
+ else
+ printk(KERN_INFO "e1000: copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irq_handler_t handler = e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+ }
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH();
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = hw->mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+static void e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ ew32(MANC, manc);
+ }
+}
+
+static void e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ ew32(MANC, manc);
+ }
+}
+
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ e1000_set_rx_mode(netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is true *
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ u16 mii_reg = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (er32(MANC) & E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ default:
+ goto out;
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+out:
+ return;
+}
+
+void e1000_down(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl, tctl;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_tx_disable(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ napi_disable(&adapter->napi);
+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_carrier_off(netdev);
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+void e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ bool legacy_pba_adjust = false;
+ u16 hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_undefined:
+ case e1000_num_macs:
+ break;
+ }
+
+ if (legacy_pba_adjust) {
+ if (hw->max_frame_size > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+
+ if (hw->mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /* adjust PBA for jumbo frames */
+ ew32(PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /*
+ * the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (hw->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = hw->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (hw->mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ }
+
+ ew32(PBA, pba);
+
+ /*
+ * flow control settings:
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - hw->max_frame_size));
+
+ hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ hw->fc_low_water = hw->fc_high_water - 8;
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544)
+ ew32(WUC, 0);
+
+ if (e1000_init_hw(hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (hw->mac_type >= e1000_82544 &&
+ hw->autoneg == 1 &&
+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ u32 ctrl = er32(CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ ew32(CTRL, ctrl);
+ }
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(hw);
+ e1000_phy_get_info(hw, &adapter->phy_info);
+
+ e1000_release_manageability(adapter);
+}
+
+/**
+ * Dump the eeprom for users having checksum issues
+ **/
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ethtool_eeprom eeprom;
+ const struct ethtool_ops *ops = netdev->ethtool_ops;
+ u8 *data;
+ int i;
+ u16 csum_old, csum_new = 0;
+
+ eeprom.len = ops->get_eeprom_len(netdev);
+ eeprom.offset = 0;
+
+ data = kmalloc(eeprom.len, GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
+ " data\n");
+ return;
+ }
+
+ ops->get_eeprom(netdev, &eeprom, data);
+
+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
+ csum_new += data[i] + (data[i + 1] << 8);
+ csum_new = EEPROM_SUM - csum_new;
+
+ printk(KERN_ERR "/*********************/\n");
+ printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
+ printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+
+ printk(KERN_ERR "Offset Values\n");
+ printk(KERN_ERR "======== ======\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
+
+ printk(KERN_ERR "Include this output when contacting your support "
+ "provider.\n");
+ printk(KERN_ERR "This is not a software error! Something bad "
+ "happened to your hardware or\n");
+ printk(KERN_ERR "EEPROM image. Ignoring this "
+ "problem could result in further problems,\n");
+ printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
+ printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
+ "which is invalid\n");
+ printk(KERN_ERR "and requires you to set the proper MAC "
+ "address manually before continuing\n");
+ printk(KERN_ERR "to enable this network device.\n");
+ printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
+ "to your hardware vendor\n");
+ printk(KERN_ERR "or Intel Customer Support.\n");
+ printk(KERN_ERR "/*********************/\n");
+
+ kfree(data);
+}
+
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct net_device_ops e1000_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats = e1000_get_stats,
+ .ndo_set_rx_mode = e1000_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_register = e1000_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+
+ static int cards_found = 0;
+ static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
+ return err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ E1000_ERR("No usable DMA configuration, "
+ "aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
+
+ hw = &adapter->hw;
+ hw->back = adapter;
+
+ err = -EIO;
+ hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ hw->io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+ }
+
+ netdev->netdev_ops = &e1000_netdev_ops;
+ e1000_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ err = -EIO;
+
+ if (hw->mac_type >= e1000_82543) {
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ }
+
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_82547))
+ netdev->features |= NETIF_F_TSO;
+
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
+
+ /* initialize eeprom parameters */
+ if (e1000_init_eeprom_params(hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(hw);
+
+ /* make sure the EEPROM is good */
+ if (e1000_validate_eeprom_checksum(hw) < 0) {
+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ e1000_dump_eeprom(adapter);
+ /*
+ * set MAC address to all zeroes to invalidate and temporary
+ * disable this device for the user. This blocks regular
+ * traffic while still permitting ethtool ioctls from reaching
+ * the hardware as well as allowing the user to run the
+ * interface after manually setting a hw addr using
+ * `ip set address`
+ */
+ memset(hw->mac_addr, 0, netdev->addr_len);
+ } else {
+ /* copy the MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw))
+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ }
+ /* don't block initalization here due to bad MAC address */
+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr))
+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+
+ e1000_get_bus_info(hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82546GB_PCIE:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->quad_port_a = 1;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* print bus type/speed/width info */
+ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+ ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
+
+ printk("%pM\n", netdev->dev_addr);
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+err_eeprom:
+ e1000_phy_hw_reset(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev, bars);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+
+ e1000_release_manageability(adapter);
+
+ unregister_netdev(netdev);
+
+ e1000_phy_hw_reset(hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev, adapter->bars);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ hw->max_frame_size = netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ e1000_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+ return E1000_SUCCESS;
+
+err_req_irq:
+ e1000_power_down_phy(adapter);
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+ unsigned long len)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long begin = (unsigned long)start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (hw->mac_type == e1000_82545 ||
+ hw->mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ }
+
+ return true;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vmalloc(size);
+ if (!txdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(txdr->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ u64 tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tdlen, tctl, tipg;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ ew32(TDLEN, tdlen);
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+ ew32(TDT, 0);
+ ew32(TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ if ((hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ ew32(TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ ew32(TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vmalloc(size);
+ if (!rxdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->buffer_info, 0, size);
+
+ desc_len = sizeof(struct e1000_rx_desc);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+ rxdr->rx_skb_top = NULL;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rdlen, rctl, rxcsum;
+
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+ } else {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ ew32(RDLEN, rdlen);
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+ ew32(RDT, 0);
+ ew32(RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = er32(RXCSUM);
+ if (adapter->rx_csum)
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ else
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ ew32(RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ pci_unmap_page(adapter->pdev, buffer_info->dma,
+ buffer_info->length, PCI_DMA_TODEVICE);
+ else
+ pci_unmap_single(adapter->pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, hw->hw_addr + tx_ring->tdh);
+ writel(0, hw->hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_rx_irq) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ } else if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
+ pci_unmap_page(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ buffer_info->dma = 0;
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->rx_skb_top) {
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, hw->hw_addr + rx_ring->rdh);
+ writel(0, hw->hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ e1000_pci_clear_mwi(hw);
+
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+
+ if (netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void e1000_set_rx_mode(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
+ struct dev_addr_list *mc_ptr;
+ u32 rctl;
+ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = E1000_NUM_MTA_REGISTERS;
+ u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
+
+ if (!mcarray) {
+ DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ return;
+ }
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI)
+ rctl |= E1000_RCTL_MPE;
+ else
+ rctl &= ~E1000_RCTL_MPE;
+ /* Enable VLAN filter if there is a VLAN */
+ if (adapter->vlgrp)
+ rctl |= E1000_RCTL_VFE;
+ }
+
+ if (netdev->uc.count > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+ use_uc = true;
+ }
+
+ ew32(RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 addresses into the exact filters 1-14. Unicast
+ * addresses take precedence to avoid disabling unicast filtering
+ * when possible.
+ *
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ */
+ i = 1;
+ if (use_uc)
+ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (i == rar_entries)
+ break;
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+
+ WARN_ON(i == rar_entries);
+
+ mc_ptr = netdev->mc_list;
+
+ for (; i < rar_entries; i++) {
+ if (mc_ptr) {
+ e1000_rar_set(hw, mc_ptr->da_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH();
+ }
+ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+ u32 hash_reg, hash_bit, mta;
+ hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+ mta = (1 << hash_bit);
+ mcarray[hash_reg] |= mta;
+ }
+
+ /* write the hash table completely, write from bottom to avoid
+ * both stupid write combining chipsets, and flushing each write */
+ for (i = mta_reg_count - 1; i >= 0 ; i--) {
+ /*
+ * If we are on an 82544 has an errata where writing odd
+ * offsets overwrites the previous even offset, but writing
+ * backwards over the range solves the issue by always
+ * writing the odd offset first
+ */
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
+ }
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ kfree(mcarray);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_phy_get_info(hw, &adapter->phy_info);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+static void e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl;
+
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((er32(TDT) == er32(TDH)) &&
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ ew32(TDFT, adapter->tx_head_addr);
+ ew32(TDFH, adapter->tx_head_addr);
+ ew32(TDFTS, adapter->tx_head_addr);
+ ew32(TDFHS, adapter->tx_head_addr);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ netif_wake_queue(netdev);
+ } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+}
+
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->media_type) {
+ case e1000_media_type_copper:
+ if (hw->get_link_status) {
+ e1000_check_for_link(hw);
+ link_active = !hw->get_link_status;
+ } else {
+ link_active = true;
+ }
+ break;
+ case e1000_media_type_fiber:
+ e1000_check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ e1000_check_for_link(hw);
+ link_active = hw->serdes_has_link;
+ break;
+ default:
+ break;
+ }
+
+ return link_active;
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ u32 link, tctl;
+
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link)
+ goto link_up;
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+ bool txb2b = true;
+ /* update snapshot of PHY registers on LSC */
+ e1000_get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = er32(CTRL);
+ printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None" )));
+
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = false;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 16;
+ break;
+ case SPEED_100:
+ txb2b = false;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ /* enable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ netif_carrier_on(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ adapter->smartspeed = 0;
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ printk(KERN_INFO "e1000: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+link_up:
+ e1000_update_stats(adapter);
+
+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = true;
+
+ /* Reset the timer */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ }
+
+ return;
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return false;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ DPRINTK(DRV, WARNING,
+ "checksum_partial proto=%x!\n", skb->protocol);
+ break;
+ }
+
+ css = skb_transport_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = pci_map_single(pdev, skb->data + offset,
+ size, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(page_to_phys(frag->page) + offset
+ + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = pci_map_page(pdev, frag->page,
+ offset, size,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, int tx_flags,
+ int count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, hw->hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len - skb->data_len;
+ unsigned int nr_frags;
+ unsigned int mss;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (skb->data_len && hdr_len == len) {
+ switch (hw->mac_type) {
+ unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
+ break;
+ /* fall through */
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ DPRINTK(DRV, ERR,
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
+ return NETDEV_TX_BUSY;
+
+ if (unlikely(hw->mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ netif_stop_queue(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->tx_fifo_stall_timer,
+ jiffies + 1);
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ if (likely(hw->mac_type != e1000_82544))
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+ nr_frags, mss);
+
+ if (count) {
+ e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
+
+ e1000_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+ /* only return the current stats */
+ return &netdev->stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (hw->mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ /* e1000_down has a dependency on max_frame_size */
+ hw->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ e1000_down(adapter);
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * however with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs */
+
+ if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else
+#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+#elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = PAGE_SIZE;
+#endif
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!hw->tbi_compatibility_on &&
+ ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
+ netdev->name, netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+ else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_tbi_adjust_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorcl += er32(GORCL);
+ adapter->stats.gorch += er32(GORCH);
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
+
+ adapter->stats.symerrs += er32(SYMERRS);
+ adapter->stats.mpc += er32(MPC);
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+ adapter->stats.sec += er32(SEC);
+ adapter->stats.rlec += er32(RLEC);
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.fcruc += er32(FCRUC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotcl += er32(GOTCL);
+ adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+ adapter->stats.rfc += er32(RFC);
+ adapter->stats.rjc += er32(RJC);
+ adapter->stats.torl += er32(TORL);
+ adapter->stats.torh += er32(TORH);
+ adapter->stats.totl += er32(TOTL);
+ adapter->stats.toth += er32(TOTH);
+ adapter->stats.tpr += er32(TPR);
+
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = er32(COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.tncrs += er32(TNCRS);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+ }
+
+ /* Fill out the OS statistics structure */
+ netdev->stats.multicast = adapter->stats.mprc;
+ netdev->stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ netdev->stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ netdev->stats.rx_length_errors = adapter->stats.rlerrc;
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ netdev->stats.tx_errors = adapter->stats.txerrc;
+ netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+ netdev->stats.tx_window_errors = adapter->stats.latecol;
+ netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (hw->bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ netdev->stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ /* Management Stats */
+ if (hw->has_smbus) {
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+ }
+
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
+ return IRQ_NONE; /* Not our interrupt */
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else {
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ int tx_clean_complete = 0, work_done = 0;
+
+ tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
+
+ if (!tx_clean_complete)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_tx_packets += segs;
+ total_tx_bytes += bytecount;
+ }
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (unlikely(count && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__E1000_DOWN, &adapter->flags))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ netdev->stats.tx_bytes += total_tx_bytes;
+ netdev->stats.tx_packets += total_tx_packets;
+ return (count < tx_ring->count);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* 82543 or newer only */
+ if (unlikely(hw->mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+ u16 length)
+{
+ bi->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ */
+static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
+ __le16 vlan, struct sk_buff *skb)
+{
+ if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_receive_skb(skb);
+ }
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ */
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long irq_flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_page(pdev, buffer_info->dma, buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* errors is only valid for DD + EOP descriptors */
+ if (unlikely((status & E1000_RXD_STAT_EOP) &&
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock,
+ irq_flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ irq_flags);
+ length--;
+ } else {
+ /* recycle both page and skb */
+ buffer_info->skb = skb;
+ /* an error means any chain goes out the window
+ * too */
+ if (rx_ring->rx_skb_top)
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ goto next_desc;
+ }
+ }
+
+#define rxtop rx_ring->rx_skb_top
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ /* this is the beginning of a chain */
+ rxtop = skb;
+ skb_fill_page_desc(rxtop, 0, buffer_info->page,
+ 0, length);
+ } else {
+ /* this is the middle of a chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the skb, only consumed the page */
+ buffer_info->skb = skb;
+ }
+ e1000_consume_page(buffer_info, rxtop, length);
+ goto next_desc;
+ } else {
+ if (rxtop) {
+ /* end of the chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the current skb, we only consumed the
+ * page */
+ buffer_info->skb = skb;
+ skb = rxtop;
+ rxtop = NULL;
+ e1000_consume_page(buffer_info, skb, length);
+ } else {
+ /* no chain, got EOP, this buf is the packet
+ * copybreak to save the put_page/alloc_page */
+ if (length <= copybreak &&
+ skb_tailroom(skb) >= length) {
+ u8 *vaddr;
+ vaddr = kmap_atomic(buffer_info->page,
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr, length);
+ kunmap_atomic(vaddr,
+ KM_SKB_DATA_SOFTIRQ);
+ /* re-use the page, so don't erase
+ * buffer_info->page */
+ skb_put(skb, length);
+ } else {
+ skb_fill_page_desc(skb, 0,
+ buffer_info->page, 0,
+ length);
+ e1000_consume_page(buffer_info, skb,
+ length);
+ }
+ }
+ }
+
+ /* Receive Checksum Offload XXX recompute due to CRC strip? */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ pskb_trim(skb, skb->len - 4);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /* eth type trans needs skb->data to point to something */
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ DPRINTK(DRV, ERR, "pskb_may_pull failed.\n");
+ dev_kfree_skb(skb);
+ goto next_desc;
+ }
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ */
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_single(pdev, buffer_info->dma, buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, if thats the case we need to toss it. In fact, we
+ * to toss every packet with the EOP bit clear and the next
+ * frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->discarding = true;
+
+ if (adapter->discarding) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ /* recycle */
+ buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->discarding = false;
+ goto next_desc;
+ }
+
+ if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ /* code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack */
+ if (length < copybreak) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb_ip_align(netdev, length);
+ if (new_skb) {
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ }
+ /* end copybreak code */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void
+e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring, int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto check_page;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while (cleaned_count--) */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+check_page:
+ /* allocate a new page if necessary */
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (unlikely(!buffer_info->page)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
+
+ if (!buffer_info->dma) {
+ buffer_info->dma = pci_map_page(pdev,
+ buffer_info->page, 0,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ put_page(buffer_info->page);
+ dev_kfree_skb(skb);
+ buffer_info->page = NULL;
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ }
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = pci_map_single(pdev,
+ skb->data,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /*
+ * XXX if it was allocated cleanly it will never map to a
+ * boundary crossing
+ */
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status;
+ u16 phy_ctrl;
+
+ if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ u16 mii_reg;
+ u16 spddplx;
+ unsigned long flags;
+
+ if (hw->media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = hw->phy_addr;
+ break;
+ case SIOCGMIIREG:
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ if (hw->media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ hw->autoneg = 1;
+ hw->autoneg_advertised = 0x2F;
+ } else {
+ if (mii_reg & 0x40)
+ spddplx = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ spddplx = SPEED_100;
+ else
+ spddplx = SPEED_10;
+ spddplx += (mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ retval = e1000_set_spd_dplx(adapter,
+ spddplx);
+ if (retval)
+ return retval;
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(hw))
+ return -EIO;
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+}
+
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return pcix_get_mmrbc(adapter->pdev);
+}
+
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+ struct e1000_adapter *adapter = hw->back;
+ pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+{
+ outl(value, port);
+}
+
+static void e1000_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ if (!(netdev->flags & IFF_PROMISC))
+ rctl |= E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ u16 vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ hw->autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((hw->media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ hw->autoneg = 1;
+ hw->autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ if (hw->mac_type >= e1000_82540) {
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+ }
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ ew32(WUC, E1000_WUC_PME_EN);
+ ew32(WUFC, wufc);
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ e1000_release_manageability(adapter);
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ printk("e1000: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+/* e1000_main.c */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_osdep-2.6.31-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,113 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#ifdef DBG
+#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+
+#define er32(reg) \
+ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg)))
+
+#define ew32(reg, value) \
+ (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg))))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
+#define E1000_WRITE_FLUSH() er32(STATUS)
+
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_osdep-2.6.31-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,113 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#ifdef DBG
+#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+
+#define er32(reg) \
+ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg)))
+
+#define ew32(reg, value) \
+ (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg))))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
+#define E1000_WRITE_FLUSH() er32(STATUS)
+
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_osdep-2.6.33-ethercat.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,113 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#ifdef DBG
+#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+
+#define er32(reg) \
+ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg)))
+
+#define ew32(reg, value) \
+ (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg))))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
+#define E1000_WRITE_FLUSH() er32(STATUS)
+
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_osdep-2.6.33-orig.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,113 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#ifdef DBG
+#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+
+#define er32(reg) \
+ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg)))
+
+#define ew32(reg, value) \
+ (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg))))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
+#define E1000_WRITE_FLUSH() er32(STATUS)
+
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_param-2.6.31-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,792 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000-2.6.31-ethercat.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Speed Override
+ *
+ * Valid Range: 0, 10, 100, 1000
+ * - 0 - auto-negotiate at all supported speeds
+ * - 10 - only link at 10 Mbps
+ * - 100 - only link at 100 Mbps
+ * - 1000 - only link at 1000 Mbps
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Speed, "Speed setting");
+
+/* User Specified Duplex Override
+ *
+ * Valid Range: 0-2
+ * - 0 - auto-negotiate for duplex
+ * - 1 - only link at half duplex
+ * - 2 - only link at full duplex
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Duplex, "Duplex setting");
+
+/* Auto-negotiation Advertisement Override
+ *
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
+ *
+ * The AutoNeg value is a bit mask describing which speed and duplex
+ * combinations should be advertised during auto-negotiation.
+ * The supported speed and duplex modes are listed below
+ *
+ * Bit 7 6 5 4 3 2 1 0
+ * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+ * Duplex Full Full Half Full Half
+ *
+ * Default Value: 0x2F (copper); 0x20 (fiber)
+ */
+E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: Read flow control settings from the EEPROM
+ */
+E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82543 and newer -based NICs
+ *
+ * Default Value: 1
+ */
+E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ DPRINTK(PROBE, INFO,
+ "%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+static void e1000_check_fiber_options(struct e1000_adapter *adapter);
+static void e1000_check_copper_options(struct e1000_adapter *adapter);
+
+/**
+ * e1000_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ DPRINTK(PROBE, NOTICE,
+ "Warning: no configuration for board #%i\n", bd);
+ DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_TXD),
+ .def = E1000_DEFAULT_TXD,
+ .arg = { .r = {
+ .min = E1000_MIN_TXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+ }}
+ };
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ tx_ring->count = ALIGN(tx_ring->count,
+ REQ_TX_DESCRIPTOR_MULTIPLE);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_RXD),
+ .def = E1000_DEFAULT_RXD,
+ .arg = { .r = {
+ .min = E1000_MIN_RXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ }}
+ };
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ rx_ring->count = ALIGN(rx_ring->count,
+ REQ_RX_DESCRIPTOR_MULTIPLE);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ struct e1000_opt_list fc_list[] =
+ {{ E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = E1000_FC_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
+ } else {
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY }}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY }}
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY }}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY }}
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR }}
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n",
+ opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ DPRINTK(PROBE, INFO,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
+ /* save the setting, because the dynamic bits change itr */
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Smart Power Down */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+ { /* Kumeran Lock Loss Workaround */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_KumeranLockLoss > bd) {
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+ } else {
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
+ }
+ }
+
+ switch (adapter->hw.media_type) {
+ case e1000_media_type_fiber:
+ case e1000_media_type_internal_serdes:
+ e1000_check_fiber_options(adapter);
+ break;
+ case e1000_media_type_copper:
+ e1000_check_copper_options(adapter);
+ break;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on fiber adapters
+ **/
+
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (num_Speed > bd) {
+ DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if (num_Duplex > bd) {
+ DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
+ "not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+}
+
+/**
+ * e1000_check_copper_options - Range Checking for Link Options, Copper Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on copper adapters
+ **/
+
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ unsigned int speed, dplx, an;
+ int bd = adapter->bd_number;
+
+ { /* Speed */
+ static const struct e1000_opt_list speed_list[] = {
+ { 0, "" },
+ { SPEED_10, "" },
+ { SPEED_100, "" },
+ { SPEED_1000, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Speed",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
+ .p = speed_list }}
+ };
+
+ if (num_Speed > bd) {
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
+ } else {
+ speed = opt.def;
+ }
+ }
+ { /* Duplex */
+ static const struct e1000_opt_list dplx_list[] = {
+ { 0, "" },
+ { HALF_DUPLEX, "" },
+ { FULL_DUPLEX, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Duplex",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
+ .p = dplx_list }}
+ };
+
+ if (e1000_check_phy_reset_block(&adapter->hw)) {
+ DPRINTK(PROBE, INFO,
+ "Link active due to SoL/IDER Session. "
+ "Speed/Duplex/AutoNeg parameter ignored.\n");
+ return;
+ }
+ if (num_Duplex > bd) {
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
+ } else {
+ dplx = opt.def;
+ }
+ }
+
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ DPRINTK(PROBE, INFO,
+ "AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
+ adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
+ } else { /* Autoneg */
+ static const struct e1000_opt_list an_list[] =
+ #define AA "AutoNeg advertising "
+ {{ 0x01, AA "10/HD" },
+ { 0x02, AA "10/FD" },
+ { 0x03, AA "10/FD, 10/HD" },
+ { 0x04, AA "100/HD" },
+ { 0x05, AA "100/HD, 10/HD" },
+ { 0x06, AA "100/HD, 10/FD" },
+ { 0x07, AA "100/HD, 10/FD, 10/HD" },
+ { 0x08, AA "100/FD" },
+ { 0x09, AA "100/FD, 10/HD" },
+ { 0x0a, AA "100/FD, 10/FD" },
+ { 0x0b, AA "100/FD, 10/FD, 10/HD" },
+ { 0x0c, AA "100/FD, 100/HD" },
+ { 0x0d, AA "100/FD, 100/HD, 10/HD" },
+ { 0x0e, AA "100/FD, 100/HD, 10/FD" },
+ { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x20, AA "1000/FD" },
+ { 0x21, AA "1000/FD, 10/HD" },
+ { 0x22, AA "1000/FD, 10/FD" },
+ { 0x23, AA "1000/FD, 10/FD, 10/HD" },
+ { 0x24, AA "1000/FD, 100/HD" },
+ { 0x25, AA "1000/FD, 100/HD, 10/HD" },
+ { 0x26, AA "1000/FD, 100/HD, 10/FD" },
+ { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x28, AA "1000/FD, 100/FD" },
+ { 0x29, AA "1000/FD, 100/FD, 10/HD" },
+ { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
+ { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
+ { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
+ { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
+ { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "AutoNeg",
+ .err = "parameter ignored",
+ .def = AUTONEG_ADV_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(an_list),
+ .p = an_list }}
+ };
+
+ if (num_AutoNeg > bd) {
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
+ } else {
+ an = opt.def;
+ }
+ adapter->hw.autoneg_advertised = an;
+ }
+
+ switch (speed + dplx) {
+ case 0:
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ DPRINTK(PROBE, INFO,
+ "Speed and duplex autonegotiation enabled\n");
+ break;
+ case HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Half Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_100_HALF;
+ break;
+ case FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
+ break;
+ case SPEED_10:
+ DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_10_FULL;
+ break;
+ case SPEED_10 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_10 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100:
+ DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "100 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
+ ADVERTISE_100_FULL;
+ break;
+ case SPEED_100 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_1000:
+ DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
+ "Duplex\n");
+ goto full_duplex_only;
+ case SPEED_1000 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO,
+ "Half Duplex is not supported at 1000 Mbps\n");
+ /* fall through */
+ case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
+ DPRINTK(PROBE, INFO,
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
+ if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ DPRINTK(PROBE, INFO,
+ "Speed, AutoNeg and MDI-X specifications are "
+ "incompatible. Setting MDI-X to a compatible value.\n");
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_param-2.6.31-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,792 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Speed Override
+ *
+ * Valid Range: 0, 10, 100, 1000
+ * - 0 - auto-negotiate at all supported speeds
+ * - 10 - only link at 10 Mbps
+ * - 100 - only link at 100 Mbps
+ * - 1000 - only link at 1000 Mbps
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Speed, "Speed setting");
+
+/* User Specified Duplex Override
+ *
+ * Valid Range: 0-2
+ * - 0 - auto-negotiate for duplex
+ * - 1 - only link at half duplex
+ * - 2 - only link at full duplex
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Duplex, "Duplex setting");
+
+/* Auto-negotiation Advertisement Override
+ *
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
+ *
+ * The AutoNeg value is a bit mask describing which speed and duplex
+ * combinations should be advertised during auto-negotiation.
+ * The supported speed and duplex modes are listed below
+ *
+ * Bit 7 6 5 4 3 2 1 0
+ * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+ * Duplex Full Full Half Full Half
+ *
+ * Default Value: 0x2F (copper); 0x20 (fiber)
+ */
+E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: Read flow control settings from the EEPROM
+ */
+E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82543 and newer -based NICs
+ *
+ * Default Value: 1
+ */
+E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ DPRINTK(PROBE, INFO,
+ "%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+static void e1000_check_fiber_options(struct e1000_adapter *adapter);
+static void e1000_check_copper_options(struct e1000_adapter *adapter);
+
+/**
+ * e1000_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ DPRINTK(PROBE, NOTICE,
+ "Warning: no configuration for board #%i\n", bd);
+ DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_TXD),
+ .def = E1000_DEFAULT_TXD,
+ .arg = { .r = {
+ .min = E1000_MIN_TXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+ }}
+ };
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ tx_ring->count = ALIGN(tx_ring->count,
+ REQ_TX_DESCRIPTOR_MULTIPLE);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_RXD),
+ .def = E1000_DEFAULT_RXD,
+ .arg = { .r = {
+ .min = E1000_MIN_RXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ }}
+ };
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ rx_ring->count = ALIGN(rx_ring->count,
+ REQ_RX_DESCRIPTOR_MULTIPLE);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ struct e1000_opt_list fc_list[] =
+ {{ E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = E1000_FC_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
+ } else {
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY }}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY }}
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY }}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY }}
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR }}
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n",
+ opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ DPRINTK(PROBE, INFO,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
+ /* save the setting, because the dynamic bits change itr */
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Smart Power Down */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+ { /* Kumeran Lock Loss Workaround */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_KumeranLockLoss > bd) {
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+ } else {
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
+ }
+ }
+
+ switch (adapter->hw.media_type) {
+ case e1000_media_type_fiber:
+ case e1000_media_type_internal_serdes:
+ e1000_check_fiber_options(adapter);
+ break;
+ case e1000_media_type_copper:
+ e1000_check_copper_options(adapter);
+ break;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on fiber adapters
+ **/
+
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (num_Speed > bd) {
+ DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if (num_Duplex > bd) {
+ DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
+ "not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+}
+
+/**
+ * e1000_check_copper_options - Range Checking for Link Options, Copper Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on copper adapters
+ **/
+
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ unsigned int speed, dplx, an;
+ int bd = adapter->bd_number;
+
+ { /* Speed */
+ static const struct e1000_opt_list speed_list[] = {
+ { 0, "" },
+ { SPEED_10, "" },
+ { SPEED_100, "" },
+ { SPEED_1000, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Speed",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
+ .p = speed_list }}
+ };
+
+ if (num_Speed > bd) {
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
+ } else {
+ speed = opt.def;
+ }
+ }
+ { /* Duplex */
+ static const struct e1000_opt_list dplx_list[] = {
+ { 0, "" },
+ { HALF_DUPLEX, "" },
+ { FULL_DUPLEX, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Duplex",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
+ .p = dplx_list }}
+ };
+
+ if (e1000_check_phy_reset_block(&adapter->hw)) {
+ DPRINTK(PROBE, INFO,
+ "Link active due to SoL/IDER Session. "
+ "Speed/Duplex/AutoNeg parameter ignored.\n");
+ return;
+ }
+ if (num_Duplex > bd) {
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
+ } else {
+ dplx = opt.def;
+ }
+ }
+
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ DPRINTK(PROBE, INFO,
+ "AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
+ adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
+ } else { /* Autoneg */
+ static const struct e1000_opt_list an_list[] =
+ #define AA "AutoNeg advertising "
+ {{ 0x01, AA "10/HD" },
+ { 0x02, AA "10/FD" },
+ { 0x03, AA "10/FD, 10/HD" },
+ { 0x04, AA "100/HD" },
+ { 0x05, AA "100/HD, 10/HD" },
+ { 0x06, AA "100/HD, 10/FD" },
+ { 0x07, AA "100/HD, 10/FD, 10/HD" },
+ { 0x08, AA "100/FD" },
+ { 0x09, AA "100/FD, 10/HD" },
+ { 0x0a, AA "100/FD, 10/FD" },
+ { 0x0b, AA "100/FD, 10/FD, 10/HD" },
+ { 0x0c, AA "100/FD, 100/HD" },
+ { 0x0d, AA "100/FD, 100/HD, 10/HD" },
+ { 0x0e, AA "100/FD, 100/HD, 10/FD" },
+ { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x20, AA "1000/FD" },
+ { 0x21, AA "1000/FD, 10/HD" },
+ { 0x22, AA "1000/FD, 10/FD" },
+ { 0x23, AA "1000/FD, 10/FD, 10/HD" },
+ { 0x24, AA "1000/FD, 100/HD" },
+ { 0x25, AA "1000/FD, 100/HD, 10/HD" },
+ { 0x26, AA "1000/FD, 100/HD, 10/FD" },
+ { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x28, AA "1000/FD, 100/FD" },
+ { 0x29, AA "1000/FD, 100/FD, 10/HD" },
+ { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
+ { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
+ { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
+ { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
+ { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "AutoNeg",
+ .err = "parameter ignored",
+ .def = AUTONEG_ADV_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(an_list),
+ .p = an_list }}
+ };
+
+ if (num_AutoNeg > bd) {
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
+ } else {
+ an = opt.def;
+ }
+ adapter->hw.autoneg_advertised = an;
+ }
+
+ switch (speed + dplx) {
+ case 0:
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ DPRINTK(PROBE, INFO,
+ "Speed and duplex autonegotiation enabled\n");
+ break;
+ case HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Half Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_100_HALF;
+ break;
+ case FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
+ break;
+ case SPEED_10:
+ DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_10_FULL;
+ break;
+ case SPEED_10 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_10 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100:
+ DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "100 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
+ ADVERTISE_100_FULL;
+ break;
+ case SPEED_100 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_1000:
+ DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
+ "Duplex\n");
+ goto full_duplex_only;
+ case SPEED_1000 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO,
+ "Half Duplex is not supported at 1000 Mbps\n");
+ /* fall through */
+ case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
+ DPRINTK(PROBE, INFO,
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
+ if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ DPRINTK(PROBE, INFO,
+ "Speed, AutoNeg and MDI-X specifications are "
+ "incompatible. Setting MDI-X to a compatible value.\n");
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_param-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,770 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000-2.6.33-ethercat.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Speed Override
+ *
+ * Valid Range: 0, 10, 100, 1000
+ * - 0 - auto-negotiate at all supported speeds
+ * - 10 - only link at 10 Mbps
+ * - 100 - only link at 100 Mbps
+ * - 1000 - only link at 1000 Mbps
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Speed, "Speed setting");
+
+/* User Specified Duplex Override
+ *
+ * Valid Range: 0-2
+ * - 0 - auto-negotiate for duplex
+ * - 1 - only link at half duplex
+ * - 2 - only link at full duplex
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Duplex, "Duplex setting");
+
+/* Auto-negotiation Advertisement Override
+ *
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
+ *
+ * The AutoNeg value is a bit mask describing which speed and duplex
+ * combinations should be advertised during auto-negotiation.
+ * The supported speed and duplex modes are listed below
+ *
+ * Bit 7 6 5 4 3 2 1 0
+ * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+ * Duplex Full Full Half Full Half
+ *
+ * Default Value: 0x2F (copper); 0x20 (fiber)
+ */
+E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: Read flow control settings from the EEPROM
+ */
+E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82543 and newer -based NICs
+ *
+ * Default Value: 1
+ */
+E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ DPRINTK(PROBE, INFO,
+ "%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+static void e1000_check_fiber_options(struct e1000_adapter *adapter);
+static void e1000_check_copper_options(struct e1000_adapter *adapter);
+
+/**
+ * e1000_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ DPRINTK(PROBE, NOTICE,
+ "Warning: no configuration for board #%i\n", bd);
+ DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_TXD),
+ .def = E1000_DEFAULT_TXD,
+ .arg = { .r = {
+ .min = E1000_MIN_TXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+ }}
+ };
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ tx_ring->count = ALIGN(tx_ring->count,
+ REQ_TX_DESCRIPTOR_MULTIPLE);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_RXD),
+ .def = E1000_DEFAULT_RXD,
+ .arg = { .r = {
+ .min = E1000_MIN_RXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ }}
+ };
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ rx_ring->count = ALIGN(rx_ring->count,
+ REQ_RX_DESCRIPTOR_MULTIPLE);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ struct e1000_opt_list fc_list[] =
+ {{ E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = E1000_FC_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
+ } else {
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY }}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY }}
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY }}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY }}
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR }}
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n",
+ opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ DPRINTK(PROBE, INFO,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
+ /* save the setting, because the dynamic bits change itr */
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Smart Power Down */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+
+ switch (adapter->hw.media_type) {
+ case e1000_media_type_fiber:
+ case e1000_media_type_internal_serdes:
+ e1000_check_fiber_options(adapter);
+ break;
+ case e1000_media_type_copper:
+ e1000_check_copper_options(adapter);
+ break;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on fiber adapters
+ **/
+
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (num_Speed > bd) {
+ DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if (num_Duplex > bd) {
+ DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
+ "not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+}
+
+/**
+ * e1000_check_copper_options - Range Checking for Link Options, Copper Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on copper adapters
+ **/
+
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ unsigned int speed, dplx, an;
+ int bd = adapter->bd_number;
+
+ { /* Speed */
+ static const struct e1000_opt_list speed_list[] = {
+ { 0, "" },
+ { SPEED_10, "" },
+ { SPEED_100, "" },
+ { SPEED_1000, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Speed",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
+ .p = speed_list }}
+ };
+
+ if (num_Speed > bd) {
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
+ } else {
+ speed = opt.def;
+ }
+ }
+ { /* Duplex */
+ static const struct e1000_opt_list dplx_list[] = {
+ { 0, "" },
+ { HALF_DUPLEX, "" },
+ { FULL_DUPLEX, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Duplex",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
+ .p = dplx_list }}
+ };
+
+ if (num_Duplex > bd) {
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
+ } else {
+ dplx = opt.def;
+ }
+ }
+
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ DPRINTK(PROBE, INFO,
+ "AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
+ adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
+ } else { /* Autoneg */
+ static const struct e1000_opt_list an_list[] =
+ #define AA "AutoNeg advertising "
+ {{ 0x01, AA "10/HD" },
+ { 0x02, AA "10/FD" },
+ { 0x03, AA "10/FD, 10/HD" },
+ { 0x04, AA "100/HD" },
+ { 0x05, AA "100/HD, 10/HD" },
+ { 0x06, AA "100/HD, 10/FD" },
+ { 0x07, AA "100/HD, 10/FD, 10/HD" },
+ { 0x08, AA "100/FD" },
+ { 0x09, AA "100/FD, 10/HD" },
+ { 0x0a, AA "100/FD, 10/FD" },
+ { 0x0b, AA "100/FD, 10/FD, 10/HD" },
+ { 0x0c, AA "100/FD, 100/HD" },
+ { 0x0d, AA "100/FD, 100/HD, 10/HD" },
+ { 0x0e, AA "100/FD, 100/HD, 10/FD" },
+ { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x20, AA "1000/FD" },
+ { 0x21, AA "1000/FD, 10/HD" },
+ { 0x22, AA "1000/FD, 10/FD" },
+ { 0x23, AA "1000/FD, 10/FD, 10/HD" },
+ { 0x24, AA "1000/FD, 100/HD" },
+ { 0x25, AA "1000/FD, 100/HD, 10/HD" },
+ { 0x26, AA "1000/FD, 100/HD, 10/FD" },
+ { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x28, AA "1000/FD, 100/FD" },
+ { 0x29, AA "1000/FD, 100/FD, 10/HD" },
+ { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
+ { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
+ { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
+ { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
+ { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "AutoNeg",
+ .err = "parameter ignored",
+ .def = AUTONEG_ADV_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(an_list),
+ .p = an_list }}
+ };
+
+ if (num_AutoNeg > bd) {
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
+ } else {
+ an = opt.def;
+ }
+ adapter->hw.autoneg_advertised = an;
+ }
+
+ switch (speed + dplx) {
+ case 0:
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ DPRINTK(PROBE, INFO,
+ "Speed and duplex autonegotiation enabled\n");
+ break;
+ case HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Half Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_100_HALF;
+ break;
+ case FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
+ break;
+ case SPEED_10:
+ DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_10_FULL;
+ break;
+ case SPEED_10 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_10 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100:
+ DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "100 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
+ ADVERTISE_100_FULL;
+ break;
+ case SPEED_100 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_1000:
+ DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
+ "Duplex\n");
+ goto full_duplex_only;
+ case SPEED_1000 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO,
+ "Half Duplex is not supported at 1000 Mbps\n");
+ /* fall through */
+ case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
+ DPRINTK(PROBE, INFO,
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
+ if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ DPRINTK(PROBE, INFO,
+ "Speed, AutoNeg and MDI-X specifications are "
+ "incompatible. Setting MDI-X to a compatible value.\n");
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_param-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,770 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Speed Override
+ *
+ * Valid Range: 0, 10, 100, 1000
+ * - 0 - auto-negotiate at all supported speeds
+ * - 10 - only link at 10 Mbps
+ * - 100 - only link at 100 Mbps
+ * - 1000 - only link at 1000 Mbps
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Speed, "Speed setting");
+
+/* User Specified Duplex Override
+ *
+ * Valid Range: 0-2
+ * - 0 - auto-negotiate for duplex
+ * - 1 - only link at half duplex
+ * - 2 - only link at full duplex
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Duplex, "Duplex setting");
+
+/* Auto-negotiation Advertisement Override
+ *
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
+ *
+ * The AutoNeg value is a bit mask describing which speed and duplex
+ * combinations should be advertised during auto-negotiation.
+ * The supported speed and duplex modes are listed below
+ *
+ * Bit 7 6 5 4 3 2 1 0
+ * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+ * Duplex Full Full Half Full Half
+ *
+ * Default Value: 0x2F (copper); 0x20 (fiber)
+ */
+E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: Read flow control settings from the EEPROM
+ */
+E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82543 and newer -based NICs
+ *
+ * Default Value: 1
+ */
+E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ DPRINTK(PROBE, INFO,
+ "%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+static void e1000_check_fiber_options(struct e1000_adapter *adapter);
+static void e1000_check_copper_options(struct e1000_adapter *adapter);
+
+/**
+ * e1000_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ DPRINTK(PROBE, NOTICE,
+ "Warning: no configuration for board #%i\n", bd);
+ DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_TXD),
+ .def = E1000_DEFAULT_TXD,
+ .arg = { .r = {
+ .min = E1000_MIN_TXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+ }}
+ };
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ tx_ring->count = ALIGN(tx_ring->count,
+ REQ_TX_DESCRIPTOR_MULTIPLE);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_RXD),
+ .def = E1000_DEFAULT_RXD,
+ .arg = { .r = {
+ .min = E1000_MIN_RXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ }}
+ };
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ rx_ring->count = ALIGN(rx_ring->count,
+ REQ_RX_DESCRIPTOR_MULTIPLE);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ struct e1000_opt_list fc_list[] =
+ {{ E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = E1000_FC_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
+ } else {
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY }}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY }}
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY }}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY }}
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR }}
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ DPRINTK(PROBE, INFO, "%s turned off\n",
+ opt.name);
+ break;
+ case 1:
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ DPRINTK(PROBE, INFO,
+ "%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
+ /* save the setting, because the dynamic bits change itr */
+ /* clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Smart Power Down */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+
+ switch (adapter->hw.media_type) {
+ case e1000_media_type_fiber:
+ case e1000_media_type_internal_serdes:
+ e1000_check_fiber_options(adapter);
+ break;
+ case e1000_media_type_copper:
+ e1000_check_copper_options(adapter);
+ break;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on fiber adapters
+ **/
+
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (num_Speed > bd) {
+ DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if (num_Duplex > bd) {
+ DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
+ "not valid for fiber adapters, "
+ "parameter ignored\n");
+ }
+}
+
+/**
+ * e1000_check_copper_options - Range Checking for Link Options, Copper Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on copper adapters
+ **/
+
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ unsigned int speed, dplx, an;
+ int bd = adapter->bd_number;
+
+ { /* Speed */
+ static const struct e1000_opt_list speed_list[] = {
+ { 0, "" },
+ { SPEED_10, "" },
+ { SPEED_100, "" },
+ { SPEED_1000, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Speed",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
+ .p = speed_list }}
+ };
+
+ if (num_Speed > bd) {
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
+ } else {
+ speed = opt.def;
+ }
+ }
+ { /* Duplex */
+ static const struct e1000_opt_list dplx_list[] = {
+ { 0, "" },
+ { HALF_DUPLEX, "" },
+ { FULL_DUPLEX, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Duplex",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
+ .p = dplx_list }}
+ };
+
+ if (num_Duplex > bd) {
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
+ } else {
+ dplx = opt.def;
+ }
+ }
+
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ DPRINTK(PROBE, INFO,
+ "AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
+ adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
+ } else { /* Autoneg */
+ static const struct e1000_opt_list an_list[] =
+ #define AA "AutoNeg advertising "
+ {{ 0x01, AA "10/HD" },
+ { 0x02, AA "10/FD" },
+ { 0x03, AA "10/FD, 10/HD" },
+ { 0x04, AA "100/HD" },
+ { 0x05, AA "100/HD, 10/HD" },
+ { 0x06, AA "100/HD, 10/FD" },
+ { 0x07, AA "100/HD, 10/FD, 10/HD" },
+ { 0x08, AA "100/FD" },
+ { 0x09, AA "100/FD, 10/HD" },
+ { 0x0a, AA "100/FD, 10/FD" },
+ { 0x0b, AA "100/FD, 10/FD, 10/HD" },
+ { 0x0c, AA "100/FD, 100/HD" },
+ { 0x0d, AA "100/FD, 100/HD, 10/HD" },
+ { 0x0e, AA "100/FD, 100/HD, 10/FD" },
+ { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x20, AA "1000/FD" },
+ { 0x21, AA "1000/FD, 10/HD" },
+ { 0x22, AA "1000/FD, 10/FD" },
+ { 0x23, AA "1000/FD, 10/FD, 10/HD" },
+ { 0x24, AA "1000/FD, 100/HD" },
+ { 0x25, AA "1000/FD, 100/HD, 10/HD" },
+ { 0x26, AA "1000/FD, 100/HD, 10/FD" },
+ { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x28, AA "1000/FD, 100/FD" },
+ { 0x29, AA "1000/FD, 100/FD, 10/HD" },
+ { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
+ { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
+ { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
+ { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
+ { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "AutoNeg",
+ .err = "parameter ignored",
+ .def = AUTONEG_ADV_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(an_list),
+ .p = an_list }}
+ };
+
+ if (num_AutoNeg > bd) {
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
+ } else {
+ an = opt.def;
+ }
+ adapter->hw.autoneg_advertised = an;
+ }
+
+ switch (speed + dplx) {
+ case 0:
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ DPRINTK(PROBE, INFO,
+ "Speed and duplex autonegotiation enabled\n");
+ break;
+ case HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Half Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_100_HALF;
+ break;
+ case FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
+ break;
+ case SPEED_10:
+ DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_10_FULL;
+ break;
+ case SPEED_10 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_10 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100:
+ DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
+ "without Duplex\n");
+ DPRINTK(PROBE, INFO, "Using Autonegotiation at "
+ "100 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
+ ADVERTISE_100_FULL;
+ break;
+ case SPEED_100 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100 + FULL_DUPLEX:
+ DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_1000:
+ DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
+ "Duplex\n");
+ goto full_duplex_only;
+ case SPEED_1000 + HALF_DUPLEX:
+ DPRINTK(PROBE, INFO,
+ "Half Duplex is not supported at 1000 Mbps\n");
+ /* fall through */
+ case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
+ DPRINTK(PROBE, INFO,
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
+ if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ DPRINTK(PROBE, INFO,
+ "Speed, AutoNeg and MDI-X specifications are "
+ "incompatible. Setting MDI-X to a compatible value.\n");
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/r8169-2.6.33-ethercat.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,5043 @@
+/*
+ * r8169.c: RealTek 8169/8168/8101 ethernet driver.
+ *
+ * Copyright (c) 2002 ShuChen <shuchen@realtek.com.tw>
+ * Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
+ * Copyright (c) a lot of people too. Please respect their work.
+ *
+ * See MAINTAINERS file for support contact information.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include "../globals.h"
+#include "ecdev.h"
+
+#define RTL8169_VERSION "2.3LK-NAPI"
+#define MODULENAME "ec_r8169"
+#define PFX MODULENAME ": "
+
+#ifdef RTL8169_DEBUG
+#define assert(expr) \
+ if (!(expr)) { \
+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr,__FILE__,__func__,__LINE__); \
+ }
+#define dprintk(fmt, args...) \
+ do { printk(KERN_DEBUG PFX fmt, ## args); } while (0)
+#else
+#define assert(expr) do {} while (0)
+#define dprintk(fmt, args...) do {} while (0)
+#endif /* RTL8169_DEBUG */
+
+#define R8169_MSG_DEFAULT \
+ (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN)
+
+#define TX_BUFFS_AVAIL(tp) \
+ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static const int multicast_filter_limit = 32;
+
+/* MAC address length */
+#define MAC_ADDR_LEN 6
+
+#define MAX_READ_REQUEST_SHIFT 12
+#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
+#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
+#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
+
+#define R8169_REGS_SIZE 256
+#define R8169_NAPI_WEIGHT 64
+#define NUM_TX_DESC 64 /* Number of Tx descriptor registers */
+#define NUM_RX_DESC 256 /* Number of Rx descriptor registers */
+#define RX_BUF_SIZE 1536 /* Rx Buffer size */
+#define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
+#define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
+
+#define RTL8169_TX_TIMEOUT (6*HZ)
+#define RTL8169_PHY_TIMEOUT (10*HZ)
+
+#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
+#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG_ADDR 0x0000
+
+/* write/read MMIO register */
+#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_R8(reg) readb (ioaddr + (reg))
+#define RTL_R16(reg) readw (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
+
+enum mac_version {
+ RTL_GIGA_MAC_NONE = 0x00,
+ RTL_GIGA_MAC_VER_01 = 0x01, // 8169
+ RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
+ RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
+ RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB
+ RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd
+ RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe
+ RTL_GIGA_MAC_VER_07 = 0x07, // 8102e
+ RTL_GIGA_MAC_VER_08 = 0x08, // 8102e
+ RTL_GIGA_MAC_VER_09 = 0x09, // 8102e
+ RTL_GIGA_MAC_VER_10 = 0x0a, // 8101e
+ RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb
+ RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be
+ RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb
+ RTL_GIGA_MAC_VER_14 = 0x0e, // 8101 ?
+ RTL_GIGA_MAC_VER_15 = 0x0f, // 8101 ?
+ RTL_GIGA_MAC_VER_16 = 0x11, // 8101Ec
+ RTL_GIGA_MAC_VER_17 = 0x10, // 8168Bf
+ RTL_GIGA_MAC_VER_18 = 0x12, // 8168CP
+ RTL_GIGA_MAC_VER_19 = 0x13, // 8168C
+ RTL_GIGA_MAC_VER_20 = 0x14, // 8168C
+ RTL_GIGA_MAC_VER_21 = 0x15, // 8168C
+ RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
+ RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
+ RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
+ RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
+ RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
+ RTL_GIGA_MAC_VER_27 = 0x1b // 8168DP
+};
+
+#define _R(NAME,MAC,MASK) \
+ { .name = NAME, .mac_version = MAC, .RxConfigMask = MASK }
+
+static const struct {
+ const char *name;
+ u8 mac_version;
+ u32 RxConfigMask; /* Clears the bits supported by this chip */
+} rtl_chip_info[] = {
+ _R("RTL8169", RTL_GIGA_MAC_VER_01, 0xff7e1880), // 8169
+ _R("RTL8169s", RTL_GIGA_MAC_VER_02, 0xff7e1880), // 8169S
+ _R("RTL8110s", RTL_GIGA_MAC_VER_03, 0xff7e1880), // 8110S
+ _R("RTL8169sb/8110sb", RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB
+ _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd
+ _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe
+ _R("RTL8102e", RTL_GIGA_MAC_VER_07, 0xff7e1880), // PCI-E
+ _R("RTL8102e", RTL_GIGA_MAC_VER_08, 0xff7e1880), // PCI-E
+ _R("RTL8102e", RTL_GIGA_MAC_VER_09, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_10, 0xff7e1880), // PCI-E
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139
+ _R("RTL8100e", RTL_GIGA_MAC_VER_14, 0xff7e1880), // PCI-E 8139
+ _R("RTL8100e", RTL_GIGA_MAC_VER_15, 0xff7e1880), // PCI-E 8139
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_17, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_16, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_18, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_19, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_20, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_21, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
+ _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880) // PCI-E
+};
+#undef _R
+
+enum cfg_version {
+ RTL_CFG_0 = 0x00,
+ RTL_CFG_1,
+ RTL_CFG_2
+};
+
+static void rtl_hw_start_8169(struct net_device *);
+static void rtl_hw_start_8168(struct net_device *);
+static void rtl_hw_start_8101(struct net_device *);
+
+static struct pci_device_id rtl8169_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 },
+ { PCI_VENDOR_ID_LINKSYS, 0x1032,
+ PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
+ { 0x0001, 0x8168,
+ PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
+ {0,},
+};
+
+/* prevent driver from being loaded automatically */
+//MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
+
+/*
+ * we set our copybreak very high so that we don't have
+ * to allocate 16k frames all the time (see note in
+ * rtl8169_open()
+ */
+static int rx_copybreak = 16383;
+static int use_dac;
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+enum rtl_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAC4 = 4,
+ MAR0 = 8, /* Multicast filter. */
+ CounterAddrLow = 0x10,
+ CounterAddrHigh = 0x14,
+ TxDescStartAddrLow = 0x20,
+ TxDescStartAddrHigh = 0x24,
+ TxHDescStartAddrLow = 0x28,
+ TxHDescStartAddrHigh = 0x2c,
+ FLASH = 0x30,
+ ERSR = 0x36,
+ ChipCmd = 0x37,
+ TxPoll = 0x38,
+ IntrMask = 0x3c,
+ IntrStatus = 0x3e,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ RxMissed = 0x4c,
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ Config2 = 0x53,
+ Config3 = 0x54,
+ Config4 = 0x55,
+ Config5 = 0x56,
+ MultiIntr = 0x5c,
+ PHYAR = 0x60,
+ PHYstatus = 0x6c,
+ RxMaxSize = 0xda,
+ CPlusCmd = 0xe0,
+ IntrMitigate = 0xe2,
+ RxDescAddrLow = 0xe4,
+ RxDescAddrHigh = 0xe8,
+ EarlyTxThres = 0xec,
+ FuncEvent = 0xf0,
+ FuncEventMask = 0xf4,
+ FuncPresetState = 0xf8,
+ FuncForceEvent = 0xfc,
+};
+
+enum rtl8110_registers {
+ TBICSR = 0x64,
+ TBI_ANAR = 0x68,
+ TBI_LPAR = 0x6a,
+};
+
+enum rtl8168_8101_registers {
+ CSIDR = 0x64,
+ CSIAR = 0x68,
+#define CSIAR_FLAG 0x80000000
+#define CSIAR_WRITE_CMD 0x80000000
+#define CSIAR_BYTE_ENABLE 0x0f
+#define CSIAR_BYTE_ENABLE_SHIFT 12
+#define CSIAR_ADDR_MASK 0x0fff
+
+ EPHYAR = 0x80,
+#define EPHYAR_FLAG 0x80000000
+#define EPHYAR_WRITE_CMD 0x80000000
+#define EPHYAR_REG_MASK 0x1f
+#define EPHYAR_REG_SHIFT 16
+#define EPHYAR_DATA_MASK 0xffff
+ DBG_REG = 0xd1,
+#define FIX_NAK_1 (1 << 4)
+#define FIX_NAK_2 (1 << 3)
+ EFUSEAR = 0xdc,
+#define EFUSEAR_FLAG 0x80000000
+#define EFUSEAR_WRITE_CMD 0x80000000
+#define EFUSEAR_READ_CMD 0x00000000
+#define EFUSEAR_REG_MASK 0x03ff
+#define EFUSEAR_REG_SHIFT 8
+#define EFUSEAR_DATA_MASK 0xff
+};
+
+enum rtl_register_content {
+ /* InterruptStatusBits */
+ SYSErr = 0x8000,
+ PCSTimeout = 0x4000,
+ SWInt = 0x0100,
+ TxDescUnavail = 0x0080,
+ RxFIFOOver = 0x0040,
+ LinkChg = 0x0020,
+ RxOverflow = 0x0010,
+ TxErr = 0x0008,
+ TxOK = 0x0004,
+ RxErr = 0x0002,
+ RxOK = 0x0001,
+
+ /* RxStatusDesc */
+ RxFOVF = (1 << 23),
+ RxRWT = (1 << 22),
+ RxRES = (1 << 21),
+ RxRUNT = (1 << 20),
+ RxCRC = (1 << 19),
+
+ /* ChipCmdBits */
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+
+ /* TXPoll register p.5 */
+ HPQ = 0x80, /* Poll cmd on the high prio queue */
+ NPQ = 0x40, /* Poll cmd on the low prio queue */
+ FSWInt = 0x01, /* Forced software interrupt */
+
+ /* Cfg9346Bits */
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xc0,
+
+ /* rx_mode_bits */
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+
+ /* RxConfigBits */
+ RxCfgFIFOShift = 13,
+ RxCfgDMAShift = 8,
+
+ /* TxConfigBits */
+ TxInterFrameGapShift = 24,
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ /* Config1 register p.24 */
+ LEDS1 = (1 << 7),
+ LEDS0 = (1 << 6),
+ MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */
+ Speed_down = (1 << 4),
+ MEMMAP = (1 << 3),
+ IOMAP = (1 << 2),
+ VPD = (1 << 1),
+ PMEnable = (1 << 0), /* Power Management Enable */
+
+ /* Config2 register p. 25 */
+ PCI_Clock_66MHz = 0x01,
+ PCI_Clock_33MHz = 0x00,
+
+ /* Config3 register p.25 */
+ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
+ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
+ Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */
+
+ /* Config5 register p.27 */
+ BWF = (1 << 6), /* Accept Broadcast wakeup frame */
+ MWF = (1 << 5), /* Accept Multicast wakeup frame */
+ UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ LanWake = (1 << 1), /* LanWake enable/disable */
+ PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
+
+ /* TBICSR p.28 */
+ TBIReset = 0x80000000,
+ TBILoopback = 0x40000000,
+ TBINwEnable = 0x20000000,
+ TBINwRestart = 0x10000000,
+ TBILinkOk = 0x02000000,
+ TBINwComplete = 0x01000000,
+
+ /* CPlusCmd p.31 */
+ EnableBist = (1 << 15), // 8168 8101
+ Mac_dbgo_oe = (1 << 14), // 8168 8101
+ Normal_mode = (1 << 13), // unused
+ Force_half_dup = (1 << 12), // 8168 8101
+ Force_rxflow_en = (1 << 11), // 8168 8101
+ Force_txflow_en = (1 << 10), // 8168 8101
+ Cxpl_dbg_sel = (1 << 9), // 8168 8101
+ ASF = (1 << 8), // 8168 8101
+ PktCntrDisable = (1 << 7), // 8168 8101
+ Mac_dbgo_sel = 0x001c, // 8168
+ RxVlan = (1 << 6),
+ RxChkSum = (1 << 5),
+ PCIDAC = (1 << 4),
+ PCIMulRW = (1 << 3),
+ INTT_0 = 0x0000, // 8168
+ INTT_1 = 0x0001, // 8168
+ INTT_2 = 0x0002, // 8168
+ INTT_3 = 0x0003, // 8168
+
+ /* rtl8169_PHYstatus */
+ TBI_Enable = 0x80,
+ TxFlowCtrl = 0x40,
+ RxFlowCtrl = 0x20,
+ _1000bpsF = 0x10,
+ _100bps = 0x08,
+ _10bps = 0x04,
+ LinkStatus = 0x02,
+ FullDup = 0x01,
+
+ /* _TBICSRBit */
+ TBILinkOK = 0x02000000,
+
+ /* DumpCounterCommand */
+ CounterDump = 0x8,
+};
+
+enum desc_status_bit {
+ DescOwn = (1 << 31), /* Descriptor is owned by NIC */
+ RingEnd = (1 << 30), /* End of descriptor ring */
+ FirstFrag = (1 << 29), /* First segment of a packet */
+ LastFrag = (1 << 28), /* Final segment of a packet */
+
+ /* Tx private */
+ LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
+ MSSShift = 16, /* MSS value position */
+ MSSMask = 0xfff, /* MSS value + LargeSend bit: 12 bits */
+ IPCS = (1 << 18), /* Calculate IP checksum */
+ UDPCS = (1 << 17), /* Calculate UDP/IP checksum */
+ TCPCS = (1 << 16), /* Calculate TCP/IP checksum */
+ TxVlanTag = (1 << 17), /* Add VLAN tag */
+
+ /* Rx private */
+ PID1 = (1 << 18), /* Protocol ID bit 1/2 */
+ PID0 = (1 << 17), /* Protocol ID bit 2/2 */
+
+#define RxProtoUDP (PID1)
+#define RxProtoTCP (PID0)
+#define RxProtoIP (PID1 | PID0)
+#define RxProtoMask RxProtoIP
+
+ IPFail = (1 << 16), /* IP checksum failed */
+ UDPFail = (1 << 15), /* UDP/IP checksum failed */
+ TCPFail = (1 << 14), /* TCP/IP checksum failed */
+ RxVlanTag = (1 << 16), /* VLAN tag available */
+};
+
+#define RsvdMask 0x3fffc000
+
+struct TxDesc {
+ __le32 opts1;
+ __le32 opts2;
+ __le64 addr;
+};
+
+struct RxDesc {
+ __le32 opts1;
+ __le32 opts2;
+ __le64 addr;
+};
+
+struct ring_info {
+ struct sk_buff *skb;
+ u32 len;
+ u8 __pad[sizeof(void *) - sizeof(u32)];
+};
+
+enum features {
+ RTL_FEATURE_WOL = (1 << 0),
+ RTL_FEATURE_MSI = (1 << 1),
+ RTL_FEATURE_GMII = (1 << 2),
+};
+
+struct rtl8169_counters {
+ __le64 tx_packets;
+ __le64 rx_packets;
+ __le64 tx_errors;
+ __le32 rx_errors;
+ __le16 rx_missed;
+ __le16 align_errors;
+ __le32 tx_one_collision;
+ __le32 tx_multi_collision;
+ __le64 rx_unicast;
+ __le64 rx_broadcast;
+ __le32 rx_multicast;
+ __le16 tx_aborted;
+ __le16 tx_underun;
+};
+
+struct rtl8169_private {
+ void __iomem *mmio_addr; /* memory map physical address */
+ struct pci_dev *pci_dev; /* Index of PCI device */
+ struct net_device *dev;
+ struct napi_struct napi;
+ spinlock_t lock; /* spin lock flag */
+ u32 msg_enable;
+ int chipset;
+ int mac_version;
+ u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
+ u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
+ u32 dirty_rx;
+ u32 dirty_tx;
+ struct TxDesc *TxDescArray; /* 256-aligned Tx descriptor ring */
+ struct RxDesc *RxDescArray; /* 256-aligned Rx descriptor ring */
+ dma_addr_t TxPhyAddr;
+ dma_addr_t RxPhyAddr;
+ struct sk_buff *Rx_skbuff[NUM_RX_DESC]; /* Rx data buffers */
+ struct ring_info tx_skb[NUM_TX_DESC]; /* Tx data buffers */
+ unsigned align;
+ unsigned rx_buf_sz;
+ struct timer_list timer;
+ u16 cp_cmd;
+ u16 intr_event;
+ u16 napi_event;
+ u16 intr_mask;
+ int phy_1000_ctrl_reg;
+#ifdef CONFIG_R8169_VLAN
+ struct vlan_group *vlgrp;
+#endif
+ int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
+ int (*get_settings)(struct net_device *, struct ethtool_cmd *);
+ void (*phy_reset_enable)(void __iomem *);
+ void (*hw_start)(struct net_device *);
+ unsigned int (*phy_reset_pending)(void __iomem *);
+ unsigned int (*link_ok)(void __iomem *);
+ int (*do_ioctl)(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd);
+ int pcie_cap;
+ struct delayed_work task;
+ unsigned features;
+
+ struct mii_if_info mii;
+ struct rtl8169_counters counters;
+
+ ec_device_t *ecdev;
+ unsigned long ec_watchdog_jiffies;
+};
+
+MODULE_AUTHOR("Florian Pose <fp@igh-essen.com>");
+MODULE_DESCRIPTION("EtherCAT-capable RealTek RTL-8169 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param(use_dac, int, 0);
+MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EC_MASTER_VERSION);
+
+static int rtl8169_open(struct net_device *dev);
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance);
+static int rtl8169_init_ring(struct net_device *dev);
+static void rtl_hw_start(struct net_device *dev);
+static int rtl8169_close(struct net_device *dev);
+static void rtl_set_rx_mode(struct net_device *dev);
+static void rtl8169_tx_timeout(struct net_device *dev);
+static struct net_device_stats *rtl8169_get_stats(struct net_device *dev);
+static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
+ void __iomem *, u32 budget);
+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
+static void rtl8169_down(struct net_device *dev);
+static void rtl8169_rx_clear(struct rtl8169_private *tp);
+static void ec_poll(struct net_device *dev);
+static int rtl8169_poll(struct napi_struct *napi, int budget);
+
+static const unsigned int rtl8169_rx_config =
+ (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
+
+static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+ int i;
+
+ RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff));
+
+ for (i = 20; i > 0; i--) {
+ /*
+ * Check if the RTL8169 has completed writing to the specified
+ * MII register.
+ */
+ if (!(RTL_R32(PHYAR) & 0x80000000))
+ break;
+ udelay(25);
+ }
+}
+
+static int mdio_read(void __iomem *ioaddr, int reg_addr)
+{
+ int i, value = -1;
+
+ RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16);
+
+ for (i = 20; i > 0; i--) {
+ /*
+ * Check if the RTL8169 has completed retrieving data from
+ * the specified MII register.
+ */
+ if (RTL_R32(PHYAR) & 0x80000000) {
+ value = RTL_R32(PHYAR) & 0xffff;
+ break;
+ }
+ udelay(25);
+ }
+ return value;
+}
+
+static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value)
+{
+ mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value);
+}
+
+static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m)
+{
+ int val;
+
+ val = mdio_read(ioaddr, reg_addr);
+ mdio_write(ioaddr, reg_addr, (val | p) & ~m);
+}
+
+static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
+ int val)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ mdio_write(ioaddr, location, val);
+}
+
+static int rtl_mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ return mdio_read(ioaddr, location);
+}
+
+static void rtl_ephy_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+ unsigned int i;
+
+ RTL_W32(EPHYAR, EPHYAR_WRITE_CMD | (value & EPHYAR_DATA_MASK) |
+ (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (!(RTL_R32(EPHYAR) & EPHYAR_FLAG))
+ break;
+ udelay(10);
+ }
+}
+
+static u16 rtl_ephy_read(void __iomem *ioaddr, int reg_addr)
+{
+ u16 value = 0xffff;
+ unsigned int i;
+
+ RTL_W32(EPHYAR, (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (RTL_R32(EPHYAR) & EPHYAR_FLAG) {
+ value = RTL_R32(EPHYAR) & EPHYAR_DATA_MASK;
+ break;
+ }
+ udelay(10);
+ }
+
+ return value;
+}
+
+static void rtl_csi_write(void __iomem *ioaddr, int addr, int value)
+{
+ unsigned int i;
+
+ RTL_W32(CSIDR, value);
+ RTL_W32(CSIAR, CSIAR_WRITE_CMD | (addr & CSIAR_ADDR_MASK) |
+ CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (!(RTL_R32(CSIAR) & CSIAR_FLAG))
+ break;
+ udelay(10);
+ }
+}
+
+static u32 rtl_csi_read(void __iomem *ioaddr, int addr)
+{
+ u32 value = ~0x00;
+ unsigned int i;
+
+ RTL_W32(CSIAR, (addr & CSIAR_ADDR_MASK) |
+ CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (RTL_R32(CSIAR) & CSIAR_FLAG) {
+ value = RTL_R32(CSIDR);
+ break;
+ }
+ udelay(10);
+ }
+
+ return value;
+}
+
+static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
+{
+ u8 value = 0xff;
+ unsigned int i;
+
+ RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT);
+
+ for (i = 0; i < 300; i++) {
+ if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) {
+ value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK;
+ break;
+ }
+ udelay(100);
+ }
+
+ return value;
+}
+
+static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
+{
+ RTL_W16(IntrMask, 0x0000);
+
+ RTL_W16(IntrStatus, 0xffff);
+}
+
+static void rtl8169_asic_down(void __iomem *ioaddr)
+{
+ RTL_W8(ChipCmd, 0x00);
+ rtl8169_irq_mask_and_ack(ioaddr);
+ RTL_R16(CPlusCmd);
+}
+
+static unsigned int rtl8169_tbi_reset_pending(void __iomem *ioaddr)
+{
+ return RTL_R32(TBICSR) & TBIReset;
+}
+
+static unsigned int rtl8169_xmii_reset_pending(void __iomem *ioaddr)
+{
+ return mdio_read(ioaddr, MII_BMCR) & BMCR_RESET;
+}
+
+static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr)
+{
+ return RTL_R32(TBICSR) & TBILinkOk;
+}
+
+static unsigned int rtl8169_xmii_link_ok(void __iomem *ioaddr)
+{
+ return RTL_R8(PHYstatus) & LinkStatus;
+}
+
+static void rtl8169_tbi_reset_enable(void __iomem *ioaddr)
+{
+ RTL_W32(TBICSR, RTL_R32(TBICSR) | TBIReset);
+}
+
+static void rtl8169_xmii_reset_enable(void __iomem *ioaddr)
+{
+ unsigned int val;
+
+ val = mdio_read(ioaddr, MII_BMCR) | BMCR_RESET;
+ mdio_write(ioaddr, MII_BMCR, val & 0xffff);
+}
+
+static void rtl8169_check_link_status(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long flags;
+
+ if (tp->ecdev) {
+ ecdev_set_link(tp->ecdev, tp->link_ok(ioaddr) ? 1 : 0);
+ } else {
+ spin_lock_irqsave(&tp->lock, flags);
+ if (tp->link_ok(ioaddr)) {
+ netif_carrier_on(dev);
+ if (netif_msg_ifup(tp))
+ printk(KERN_INFO PFX "%s: link up\n", dev->name);
+ } else {
+ if (netif_msg_ifdown(tp))
+ printk(KERN_INFO PFX "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+}
+
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 options;
+
+ wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+ wol->supported = WAKE_ANY;
+
+ spin_lock_irq(&tp->lock);
+
+ options = RTL_R8(Config1);
+ if (!(options & PMEnable))
+ goto out_unlock;
+
+ options = RTL_R8(Config3);
+ if (options & LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (options & MagicPacket)
+ wol->wolopts |= WAKE_MAGIC;
+
+ options = RTL_R8(Config5);
+ if (options & UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (options & BWF)
+ wol->wolopts |= WAKE_BCAST;
+ if (options & MWF)
+ wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+ static const struct {
+ u32 opt;
+ u16 reg;
+ u8 mask;
+ } cfg[] = {
+ { WAKE_ANY, Config1, PMEnable },
+ { WAKE_PHY, Config3, LinkUp },
+ { WAKE_MAGIC, Config3, MagicPacket },
+ { WAKE_UCAST, Config5, UWF },
+ { WAKE_BCAST, Config5, BWF },
+ { WAKE_MCAST, Config5, MWF },
+ { WAKE_ANY, Config5, LanWake }
+ };
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+ u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+ if (wol->wolopts & cfg[i].opt)
+ options |= cfg[i].mask;
+ RTL_W8(cfg[i].reg, options);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ if (wol->wolopts)
+ tp->features |= RTL_FEATURE_WOL;
+ else
+ tp->features &= ~RTL_FEATURE_WOL;
+ device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8169_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ strcpy(info->driver, MODULENAME);
+ strcpy(info->version, RTL8169_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int rtl8169_get_regs_len(struct net_device *dev)
+{
+ return R8169_REGS_SIZE;
+}
+
+static int rtl8169_set_speed_tbi(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int ret = 0;
+ u32 reg;
+
+ reg = RTL_R32(TBICSR);
+ if ((autoneg == AUTONEG_DISABLE) && (speed == SPEED_1000) &&
+ (duplex == DUPLEX_FULL)) {
+ RTL_W32(TBICSR, reg & ~(TBINwEnable | TBINwRestart));
+ } else if (autoneg == AUTONEG_ENABLE)
+ RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
+ else {
+ if (netif_msg_link(tp)) {
+ printk(KERN_WARNING "%s: "
+ "incorrect speed setting refused in TBI mode\n",
+ dev->name);
+ }
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static int rtl8169_set_speed_xmii(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int giga_ctrl, bmcr;
+
+ if (autoneg == AUTONEG_ENABLE) {
+ int auto_nego;
+
+ auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
+ auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL);
+ auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+
+ giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
+ giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+
+ /* The 8100e/8101e/8102e do Fast Ethernet only. */
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_16)) {
+ giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+ } else if (netif_msg_link(tp)) {
+ printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
+ dev->name);
+ }
+
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
+ (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
+ /*
+ * Wake up the PHY.
+ * Vendor specific (0x1f) and reserved (0x0e) MII
+ * registers.
+ */
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_write(ioaddr, 0x0e, 0x0000);
+ }
+
+ mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
+ mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
+ } else {
+ giga_ctrl = 0;
+
+ if (speed == SPEED_10)
+ bmcr = 0;
+ else if (speed == SPEED_100)
+ bmcr = BMCR_SPEED100;
+ else
+ return -EINVAL;
+
+ if (duplex == DUPLEX_FULL)
+ bmcr |= BMCR_FULLDPLX;
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ }
+
+ tp->phy_1000_ctrl_reg = giga_ctrl;
+
+ mdio_write(ioaddr, MII_BMCR, bmcr);
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
+ mdio_write(ioaddr, 0x17, 0x2138);
+ mdio_write(ioaddr, 0x0e, 0x0260);
+ } else {
+ mdio_write(ioaddr, 0x17, 0x2108);
+ mdio_write(ioaddr, 0x0e, 0x0000);
+ }
+ }
+
+ return 0;
+}
+
+static int rtl8169_set_speed(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int ret;
+
+ ret = tp->set_speed(dev, autoneg, speed, duplex);
+
+ if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+ mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
+
+ return ret;
+}
+
+static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ ret = rtl8169_set_speed(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return ret;
+}
+
+static u32 rtl8169_get_rx_csum(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return tp->cp_cmd & RxChkSum;
+}
+
+static int rtl8169_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ if (data)
+ tp->cp_cmd |= RxChkSum;
+ else
+ tp->cp_cmd &= ~RxChkSum;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ RTL_R16(CPlusCmd);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return 0;
+}
+
+#ifdef CONFIG_R8169_VLAN
+
+static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
+ struct sk_buff *skb)
+{
+ return (tp->vlgrp && vlan_tx_tag_present(skb)) ?
+ TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
+}
+
+static void rtl8169_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ tp->vlgrp = grp;
+ /*
+ * Do not disable RxVlan on 8110SCd.
+ */
+ if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05))
+ tp->cp_cmd |= RxVlan;
+ else
+ tp->cp_cmd &= ~RxVlan;
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ RTL_R16(CPlusCmd);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
+ struct sk_buff *skb)
+{
+ u32 opts2 = le32_to_cpu(desc->opts2);
+ struct vlan_group *vlgrp = tp->vlgrp;
+ int ret;
+
+ if (vlgrp && (opts2 & RxVlanTag)) {
+ vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+ ret = 0;
+ } else
+ ret = -1;
+ desc->opts2 = 0;
+ return ret;
+}
+
+#else /* !CONFIG_R8169_VLAN */
+
+static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
+ struct sk_buff *skb)
+{
+ return 0;
+}
+
+static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
+ struct sk_buff *skb)
+{
+ return -1;
+}
+
+#endif
+
+static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 status;
+
+ cmd->supported =
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE;
+ cmd->port = PORT_FIBRE;
+ cmd->transceiver = XCVR_INTERNAL;
+
+ status = RTL_R32(TBICSR);
+ cmd->advertising = (status & TBINwEnable) ? ADVERTISED_Autoneg : 0;
+ cmd->autoneg = !!(status & TBINwEnable);
+
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL; /* Always set */
+
+ return 0;
+}
+
+static int rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_gset(&tp->mii, cmd);
+}
+
+static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ rc = tp->get_settings(dev, cmd);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+ return rc;
+}
+
+static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (regs->len > R8169_REGS_SIZE)
+ regs->len = R8169_REGS_SIZE;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ memcpy_fromio(p, tp->mmio_addr, regs->len);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static u32 rtl8169_get_msglevel(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void rtl8169_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
+static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = {
+ "tx_packets",
+ "rx_packets",
+ "tx_errors",
+ "rx_errors",
+ "rx_missed",
+ "align_errors",
+ "tx_single_collisions",
+ "tx_multi_collisions",
+ "unicast",
+ "broadcast",
+ "multicast",
+ "tx_aborted",
+ "tx_underrun",
+};
+
+static int rtl8169_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(rtl8169_gstrings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8169_update_counters(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct rtl8169_counters *counters;
+ dma_addr_t paddr;
+ u32 cmd;
+ int wait = 1000;
+
+ /*
+ * Some chips are unable to dump tally counters when the receiver
+ * is disabled.
+ */
+ if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
+ return;
+
+ counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+ if (!counters)
+ return;
+
+ RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
+ cmd = (u64)paddr & DMA_BIT_MASK(32);
+ RTL_W32(CounterAddrLow, cmd);
+ RTL_W32(CounterAddrLow, cmd | CounterDump);
+
+ while (wait--) {
+ if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
+ /* copy updated counters */
+ memcpy(&tp->counters, counters, sizeof(*counters));
+ break;
+ }
+ udelay(10);
+ }
+
+ RTL_W32(CounterAddrLow, 0);
+ RTL_W32(CounterAddrHigh, 0);
+
+ pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+}
+
+static void rtl8169_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ ASSERT_RTNL();
+
+ rtl8169_update_counters(dev);
+
+ data[0] = le64_to_cpu(tp->counters.tx_packets);
+ data[1] = le64_to_cpu(tp->counters.rx_packets);
+ data[2] = le64_to_cpu(tp->counters.tx_errors);
+ data[3] = le32_to_cpu(tp->counters.rx_errors);
+ data[4] = le16_to_cpu(tp->counters.rx_missed);
+ data[5] = le16_to_cpu(tp->counters.align_errors);
+ data[6] = le32_to_cpu(tp->counters.tx_one_collision);
+ data[7] = le32_to_cpu(tp->counters.tx_multi_collision);
+ data[8] = le64_to_cpu(tp->counters.rx_unicast);
+ data[9] = le64_to_cpu(tp->counters.rx_broadcast);
+ data[10] = le32_to_cpu(tp->counters.rx_multicast);
+ data[11] = le16_to_cpu(tp->counters.tx_aborted);
+ data[12] = le16_to_cpu(tp->counters.tx_underun);
+}
+
+static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ switch(stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings));
+ break;
+ }
+}
+
+static const struct ethtool_ops rtl8169_ethtool_ops = {
+ .get_drvinfo = rtl8169_get_drvinfo,
+ .get_regs_len = rtl8169_get_regs_len,
+ .get_link = ethtool_op_get_link,
+ .get_settings = rtl8169_get_settings,
+ .set_settings = rtl8169_set_settings,
+ .get_msglevel = rtl8169_get_msglevel,
+ .set_msglevel = rtl8169_set_msglevel,
+ .get_rx_csum = rtl8169_get_rx_csum,
+ .set_rx_csum = rtl8169_set_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = ethtool_op_set_tso,
+ .get_regs = rtl8169_get_regs,
+ .get_wol = rtl8169_get_wol,
+ .set_wol = rtl8169_set_wol,
+ .get_strings = rtl8169_get_strings,
+ .get_sset_count = rtl8169_get_sset_count,
+ .get_ethtool_stats = rtl8169_get_ethtool_stats,
+};
+
+static void rtl8169_get_mac_version(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ /*
+ * The driver currently handles the 8168Bf and the 8168Be identically
+ * but they can be identified more specifically through the test below
+ * if needed:
+ *
+ * (RTL_R32(TxConfig) & 0x700000) == 0x500000 ? 8168Bf : 8168Be
+ *
+ * Same thing for the 8101Eb and the 8101Ec:
+ *
+ * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
+ */
+ static const struct {
+ u32 mask;
+ u32 val;
+ int mac_version;
+ } mac_info[] = {
+ /* 8168D family. */
+ { 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 },
+ { 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 },
+ { 0x7c800000, 0x28800000, RTL_GIGA_MAC_VER_27 },
+ { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
+
+ /* 8168C family. */
+ { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
+ { 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
+ { 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3c000000, RTL_GIGA_MAC_VER_19 },
+ { 0x7cf00000, 0x3c200000, RTL_GIGA_MAC_VER_20 },
+ { 0x7cf00000, 0x3c300000, RTL_GIGA_MAC_VER_21 },
+ { 0x7cf00000, 0x3c400000, RTL_GIGA_MAC_VER_22 },
+ { 0x7c800000, 0x3c000000, RTL_GIGA_MAC_VER_22 },
+
+ /* 8168B family. */
+ { 0x7cf00000, 0x38000000, RTL_GIGA_MAC_VER_12 },
+ { 0x7cf00000, 0x38500000, RTL_GIGA_MAC_VER_17 },
+ { 0x7c800000, 0x38000000, RTL_GIGA_MAC_VER_17 },
+ { 0x7c800000, 0x30000000, RTL_GIGA_MAC_VER_11 },
+
+ /* 8101 family. */
+ { 0x7cf00000, 0x34a00000, RTL_GIGA_MAC_VER_09 },
+ { 0x7cf00000, 0x24a00000, RTL_GIGA_MAC_VER_09 },
+ { 0x7cf00000, 0x34900000, RTL_GIGA_MAC_VER_08 },
+ { 0x7cf00000, 0x24900000, RTL_GIGA_MAC_VER_08 },
+ { 0x7cf00000, 0x34800000, RTL_GIGA_MAC_VER_07 },
+ { 0x7cf00000, 0x24800000, RTL_GIGA_MAC_VER_07 },
+ { 0x7cf00000, 0x34000000, RTL_GIGA_MAC_VER_13 },
+ { 0x7cf00000, 0x34300000, RTL_GIGA_MAC_VER_10 },
+ { 0x7cf00000, 0x34200000, RTL_GIGA_MAC_VER_16 },
+ { 0x7c800000, 0x34800000, RTL_GIGA_MAC_VER_09 },
+ { 0x7c800000, 0x24800000, RTL_GIGA_MAC_VER_09 },
+ { 0x7c800000, 0x34000000, RTL_GIGA_MAC_VER_16 },
+ /* FIXME: where did these entries come from ? -- FR */
+ { 0xfc800000, 0x38800000, RTL_GIGA_MAC_VER_15 },
+ { 0xfc800000, 0x30800000, RTL_GIGA_MAC_VER_14 },
+
+ /* 8110 family. */
+ { 0xfc800000, 0x98000000, RTL_GIGA_MAC_VER_06 },
+ { 0xfc800000, 0x18000000, RTL_GIGA_MAC_VER_05 },
+ { 0xfc800000, 0x10000000, RTL_GIGA_MAC_VER_04 },
+ { 0xfc800000, 0x04000000, RTL_GIGA_MAC_VER_03 },
+ { 0xfc800000, 0x00800000, RTL_GIGA_MAC_VER_02 },
+ { 0xfc800000, 0x00000000, RTL_GIGA_MAC_VER_01 },
+
+ /* Catch-all */
+ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE }
+ }, *p = mac_info;
+ u32 reg;
+
+ reg = RTL_R32(TxConfig);
+ while ((reg & p->mask) != p->val)
+ p++;
+ tp->mac_version = p->mac_version;
+}
+
+static void rtl8169_print_mac_version(struct rtl8169_private *tp)
+{
+ dprintk("mac_version = 0x%02x\n", tp->mac_version);
+}
+
+struct phy_reg {
+ u16 reg;
+ u16 val;
+};
+
+static void rtl_phy_write(void __iomem *ioaddr, const struct phy_reg *regs, int len)
+{
+ while (len-- > 0) {
+ mdio_write(ioaddr, regs->reg, regs->val);
+ regs++;
+ }
+}
+
+static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x006e },
+ { 0x08, 0x0708 },
+ { 0x15, 0x4000 },
+ { 0x18, 0x65c7 },
+
+ { 0x1f, 0x0001 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x0000 },
+
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf60 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x0077 },
+ { 0x04, 0x7800 },
+ { 0x04, 0x7000 },
+
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf0f9 },
+ { 0x04, 0x9800 },
+ { 0x04, 0x9000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xa000 },
+
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x00bb },
+ { 0x04, 0xb800 },
+ { 0x04, 0xb000 },
+
+ { 0x03, 0xdf41 },
+ { 0x02, 0xdc60 },
+ { 0x01, 0x6340 },
+ { 0x00, 0x007d },
+ { 0x04, 0xd800 },
+ { 0x04, 0xd000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x100a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0b, 0x0000 },
+ { 0x00, 0x9200 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x01, 0x90d0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 vendor_id, device_id;
+
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &vendor_id);
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &device_id);
+
+ if ((vendor_id != PCI_VENDOR_ID_GIGABYTE) || (device_id != 0xe000))
+ return;
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x10, 0xf01b);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x10, 0xf41b },
+ { 0x14, 0xfb54 },
+ { 0x18, 0xf5c7 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ rtl8169scd_hw_phy_config_quirk(tp, ioaddr);
+}
+
+static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0x8480 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x18, 0x67c7 },
+ { 0x04, 0x2000 },
+ { 0x03, 0x002f },
+ { 0x02, 0x4360 },
+ { 0x01, 0x0109 },
+ { 0x00, 0x3022 },
+ { 0x04, 0x2800 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168bb_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x10, 0xf41b },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168bef_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x10, 0xf41b },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168cp_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0000 },
+ { 0x1d, 0x0f00 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x1ec8 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168cp_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168c_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x1f, 0x0002 },
+ { 0x00, 0x88d4 },
+ { 0x01, 0x82b1 },
+ { 0x03, 0x7002 },
+ { 0x08, 0x9e30 },
+ { 0x09, 0x01f0 },
+ { 0x0a, 0x5500 },
+ { 0x0c, 0x00c8 },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xc096 },
+ { 0x16, 0x000a },
+ { 0x1f, 0x0000 },
+ { 0x1f, 0x0000 },
+ { 0x09, 0x2000 },
+ { 0x09, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0x9000 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x7eb8 },
+ { 0x06, 0x0761 },
+ { 0x1f, 0x0003 },
+ { 0x16, 0x0f0a },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_3_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x7eb8 },
+ { 0x06, 0x5461 },
+ { 0x1f, 0x0003 },
+ { 0x16, 0x0f0a },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr)
+{
+ rtl8168c_3_hw_phy_config(ioaddr);
+}
+
+static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init_0[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 }
+ };
+ static const struct phy_reg phy_reg_init_1[] = {
+ { 0x1f, 0x0002 },
+ { 0x06, 0x5561 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static const struct phy_reg phy_reg_init_2[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaef },
+ { 0x06, 0x59ee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d59 },
+ { 0x06, 0x0fef },
+ { 0x06, 0x0139 },
+ { 0x06, 0x029e },
+ { 0x06, 0x06ef },
+ { 0x06, 0x1039 },
+ { 0x06, 0x089f },
+ { 0x06, 0x2aee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x01e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d58 },
+ { 0x06, 0x409e },
+ { 0x06, 0x0f39 },
+ { 0x06, 0x46aa },
+ { 0x06, 0x0bbf },
+ { 0x06, 0x8290 },
+ { 0x06, 0xd682 },
+ { 0x06, 0x9802 },
+ { 0x06, 0x014f },
+ { 0x06, 0xae09 },
+ { 0x06, 0xbf82 },
+ { 0x06, 0x98d6 },
+ { 0x06, 0x82a0 },
+ { 0x06, 0x0201 },
+ { 0x06, 0x4fef },
+ { 0x06, 0x95fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xea00 },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xeb00 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7ce3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0xa511 },
+ { 0x06, 0x1112 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd644 },
+ { 0x06, 0x4402 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xae0f },
+ { 0x06, 0xa544 },
+ { 0x06, 0x4402 },
+ { 0x06, 0xae4d },
+ { 0x06, 0xa5aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0xae47 },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834d },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834c },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8351 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834a },
+ { 0x06, 0xffee },
+ { 0x06, 0x834b },
+ { 0x06, 0xffe0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3158 },
+ { 0x06, 0xfee4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13e0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x009f },
+ { 0x06, 0x0ae0 },
+ { 0x06, 0x834f },
+ { 0x06, 0xa010 },
+ { 0x06, 0xa5ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x01e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7805 },
+ { 0x06, 0x9e9a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x10e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x019e },
+ { 0x06, 0x05ae },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81f8 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa3af },
+ { 0x06, 0x81dc },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x8348 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8349 },
+ { 0x06, 0x00e0 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x5801 },
+ { 0x06, 0x9fea },
+ { 0x06, 0xd000 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0xeae3 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x5af8 },
+ { 0x06, 0x1e20 },
+ { 0x06, 0xe6f8 },
+ { 0x06, 0xeae5 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0xd302 },
+ { 0x06, 0xb3fe },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7cef },
+ { 0x06, 0x325b },
+ { 0x06, 0x80e3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0x9e03 },
+ { 0x06, 0x7dff },
+ { 0x06, 0xff0d },
+ { 0x06, 0x581c },
+ { 0x06, 0x551a },
+ { 0x06, 0x6511 },
+ { 0x06, 0xa190 },
+ { 0x06, 0xd3e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x491b },
+ { 0x06, 0x56ab },
+ { 0x06, 0x08ef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4910 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xa004 },
+ { 0x06, 0xb9e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x49ef },
+ { 0x06, 0x65e2 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe383 },
+ { 0x06, 0x4b1b },
+ { 0x06, 0x56aa },
+ { 0x06, 0x0eef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4be2 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ce0 },
+ { 0x06, 0x834d },
+ { 0x06, 0xa000 },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81dc },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4d10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4dae },
+ { 0x06, 0x0480 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4de0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x02e0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x6801 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xae37 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e03 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4ce1 },
+ { 0x06, 0x834d },
+ { 0x06, 0x1b01 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xaaa1 },
+ { 0x06, 0xaea8 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xaeab },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f78 },
+ { 0x06, 0x039f },
+ { 0x06, 0x14ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x05d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x5554 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xba00 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x6802 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x580f },
+ { 0x06, 0x1e02 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xd000 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x5bbf },
+ { 0x06, 0x8350 },
+ { 0x06, 0xef46 },
+ { 0x06, 0xdc19 },
+ { 0x06, 0xddd0 },
+ { 0x06, 0x0102 },
+ { 0x06, 0x825b },
+ { 0x06, 0x0282 },
+ { 0x06, 0x77e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6158 },
+ { 0x06, 0xfde4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61fc },
+ { 0x06, 0x04f9 },
+ { 0x06, 0xfafb },
+ { 0x06, 0xc6bf },
+ { 0x06, 0xf840 },
+ { 0x06, 0xbe83 },
+ { 0x06, 0x50a0 },
+ { 0x06, 0x0101 },
+ { 0x06, 0x071b },
+ { 0x06, 0x89cf },
+ { 0x06, 0xd208 },
+ { 0x06, 0xebdb },
+ { 0x06, 0x19b2 },
+ { 0x06, 0xfbff },
+ { 0x06, 0xfefd },
+ { 0x06, 0x04f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x6808 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x58f7 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0x4d20 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4e22 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4ddf },
+ { 0x06, 0xff01 },
+ { 0x06, 0x4edd },
+ { 0x06, 0xff01 },
+ { 0x05, 0x83d4 },
+ { 0x06, 0x8000 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8051 },
+ { 0x02, 0x6010 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef);
+ mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+
+ if ((val & 0x00ff) != 0x006c) {
+ static const u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x6662 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x6662 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+ }
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0d, 0x0300);
+ mdio_patch(ioaddr, 0x0f, 0x0010);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2));
+}
+
+static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init_0[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 },
+
+ { 0x1f, 0x0002 },
+ { 0x06, 0x5561 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static const struct phy_reg phy_reg_init_1[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7da5 },
+ { 0x06, 0x1111 },
+ { 0x06, 0x12d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6ae },
+ { 0x06, 0x0fa5 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x02ae },
+ { 0x06, 0x4da5 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x02ae },
+ { 0x06, 0x47af },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4d0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4c0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x5100 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4aff },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4bff },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x58fe },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8daf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7800 },
+ { 0x06, 0x9f0a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4fa0 },
+ { 0x06, 0x10a5 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e01 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x059e },
+ { 0x06, 0x9ae0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e10 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7801 },
+ { 0x06, 0x9e05 },
+ { 0x06, 0xae0c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa7af },
+ { 0x06, 0x8152 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8baf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4800 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4900 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x5110 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x5158 },
+ { 0x06, 0x019f },
+ { 0x06, 0xead0 },
+ { 0x06, 0x00d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66e2 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0xeb5a },
+ { 0x06, 0xf81e },
+ { 0x06, 0x20e6 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0xebd3 },
+ { 0x06, 0x02b3 },
+ { 0x06, 0xfee2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xef32 },
+ { 0x06, 0x5b80 },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7d9e },
+ { 0x06, 0x037d },
+ { 0x06, 0xffff },
+ { 0x06, 0x0d58 },
+ { 0x06, 0x1c55 },
+ { 0x06, 0x1a65 },
+ { 0x06, 0x11a1 },
+ { 0x06, 0x90d3 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xab08 },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x48e7 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x10d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66a0 },
+ { 0x06, 0x04b9 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0xef65 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4ae3 },
+ { 0x06, 0x834b },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xaa0e },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ae7 },
+ { 0x06, 0x834b },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4de6 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4da0 },
+ { 0x06, 0x000c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x834d },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xae04 },
+ { 0x06, 0x80e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0be0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e02 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8de0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3168 },
+ { 0x06, 0x01e4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8bae },
+ { 0x06, 0x37ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x03e0 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe183 },
+ { 0x06, 0x4d1b },
+ { 0x06, 0x019e },
+ { 0x06, 0x04aa },
+ { 0x06, 0xa1ae },
+ { 0x06, 0xa8ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ae },
+ { 0x06, 0xabe0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9f14 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e05 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd655 },
+ { 0x06, 0x5402 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6ba },
+ { 0x06, 0x0002 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xfefd },
+ { 0x06, 0xfc05 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6168 },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0x0f1e },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49d0 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x820a },
+ { 0x06, 0xbf83 },
+ { 0x06, 0x50ef },
+ { 0x06, 0x46dc },
+ { 0x06, 0x19dd },
+ { 0x06, 0xd001 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x0a02 },
+ { 0x06, 0x8226 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x58fd },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xfbc6 },
+ { 0x06, 0xbff8 },
+ { 0x06, 0x40be },
+ { 0x06, 0x8350 },
+ { 0x06, 0xa001 },
+ { 0x06, 0x0107 },
+ { 0x06, 0x1b89 },
+ { 0x06, 0xcfd2 },
+ { 0x06, 0x08eb },
+ { 0x06, 0xdb19 },
+ { 0x06, 0xb2fb },
+ { 0x06, 0xfffe },
+ { 0x06, 0xfd04 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4968 },
+ { 0x06, 0x08e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0xf7e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49fc },
+ { 0x06, 0x044d },
+ { 0x06, 0x2000 },
+ { 0x06, 0x024e },
+ { 0x06, 0x2200 },
+ { 0x06, 0x024d },
+ { 0x06, 0xdfff },
+ { 0x06, 0x014e },
+ { 0x06, 0xddff },
+ { 0x06, 0x0100 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8000 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+ if ((val & 0x00ff) != 0x006c) {
+ u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x2642 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x2642 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+ }
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x17, 0x0cc0);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0f, 0x0017);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+}
+
+static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x10, 0x0008 },
+ { 0x0d, 0x006c },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0xa4d8 },
+ { 0x09, 0x281c },
+ { 0x07, 0x2883 },
+ { 0x0a, 0x6b35 },
+ { 0x1d, 0x3da4 },
+ { 0x1c, 0xeffd },
+ { 0x14, 0x7f52 },
+ { 0x18, 0x7fc6 },
+ { 0x08, 0x0601 },
+ { 0x06, 0x4063 },
+ { 0x10, 0xf074 },
+ { 0x1f, 0x0003 },
+ { 0x13, 0x0789 },
+ { 0x12, 0xf4bd },
+ { 0x1a, 0x04fd },
+ { 0x14, 0x84b0 },
+ { 0x1f, 0x0000 },
+ { 0x00, 0x9200 },
+
+ { 0x1f, 0x0005 },
+ { 0x01, 0x0340 },
+ { 0x1f, 0x0001 },
+ { 0x04, 0x4000 },
+ { 0x03, 0x1d21 },
+ { 0x02, 0x0c32 },
+ { 0x01, 0x0200 },
+ { 0x00, 0x5554 },
+ { 0x04, 0x4800 },
+ { 0x04, 0x4000 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0007 },
+ { 0x1e, 0x0023 },
+ { 0x16, 0x0000 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0003 },
+ { 0x08, 0x441d },
+ { 0x01, 0x9100 },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_patch(ioaddr, 0x11, 1 << 12);
+ mdio_patch(ioaddr, 0x19, 1 << 13);
+ mdio_patch(ioaddr, 0x10, 1 << 15);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl_hw_phy_config(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl8169_print_mac_version(tp);
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_01:
+ break;
+ case RTL_GIGA_MAC_VER_02:
+ case RTL_GIGA_MAC_VER_03:
+ rtl8169s_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_04:
+ rtl8169sb_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_05:
+ rtl8169scd_hw_phy_config(tp, ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_06:
+ rtl8169sce_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_07:
+ case RTL_GIGA_MAC_VER_08:
+ case RTL_GIGA_MAC_VER_09:
+ rtl8102e_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_11:
+ rtl8168bb_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_12:
+ rtl8168bef_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_17:
+ rtl8168bef_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_18:
+ rtl8168cp_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_19:
+ rtl8168c_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_20:
+ rtl8168c_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_21:
+ rtl8168c_3_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_22:
+ rtl8168c_4_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_23:
+ case RTL_GIGA_MAC_VER_24:
+ rtl8168cp_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_25:
+ rtl8168d_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_26:
+ rtl8168d_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_27:
+ rtl8168d_3_hw_phy_config(ioaddr);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static void rtl8169_phy_timer(unsigned long __opaque)
+{
+ struct net_device *dev = (struct net_device *)__opaque;
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long timeout = RTL8169_PHY_TIMEOUT;
+
+ assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
+
+ if (!(tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+ return;
+
+ if (!tp->ecdev)
+ spin_lock_irq(&tp->lock);
+
+ if (tp->phy_reset_pending(ioaddr)) {
+ /*
+ * A busy loop could burn quite a few cycles on nowadays CPU.
+ * Let's delay the execution of the timer for a few ticks.
+ */
+ timeout = HZ/10;
+ goto out_mod_timer;
+ }
+
+ if (tp->link_ok(ioaddr))
+ goto out_unlock;
+
+ if (netif_msg_link(tp))
+ printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name);
+
+ tp->phy_reset_enable(ioaddr);
+
+out_mod_timer:
+ if (!tp->ecdev)
+ mod_timer(timer, jiffies + timeout);
+out_unlock:
+ if (!tp->ecdev)
+ spin_unlock_irq(&tp->lock);
+}
+
+static inline void rtl8169_delete_timer(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ if (tp->ecdev || tp->mac_version <= RTL_GIGA_MAC_VER_01)
+ return;
+
+ del_timer_sync(timer);
+}
+
+static inline void rtl8169_request_timer(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ if (tp->ecdev || tp->mac_version <= RTL_GIGA_MAC_VER_01)
+ return;
+
+ mod_timer(timer, jiffies + RTL8169_PHY_TIMEOUT);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void rtl8169_netpoll(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ disable_irq(pdev->irq);
+ rtl8169_interrupt(pdev->irq, dev);
+ enable_irq(pdev->irq);
+}
+#endif
+
+static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
+ void __iomem *ioaddr)
+{
+ iounmap(ioaddr);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+static void rtl8169_phy_reset(struct net_device *dev,
+ struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+
+ tp->phy_reset_enable(ioaddr);
+ for (i = 0; i < 100; i++) {
+ if (!tp->phy_reset_pending(ioaddr))
+ return;
+ msleep(1);
+ }
+ if (netif_msg_link(tp))
+ printk(KERN_ERR "%s: PHY reset failed.\n", dev->name);
+}
+
+static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl_hw_phy_config(dev);
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
+ dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+ RTL_W8(0x82, 0x01);
+ }
+
+ pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
+ pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_02) {
+ dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+ RTL_W8(0x82, 0x01);
+ dprintk("Set PHY Reg 0x0bh = 0x00h\n");
+ mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0
+ }
+
+ rtl8169_phy_reset(dev, tp);
+
+ /*
+ * rtl8169_set_speed_xmii takes good care of the Fast Ethernet
+ * only 8101. Don't panic.
+ */
+ rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL);
+
+ if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
+ printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
+}
+
+static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 high;
+ u32 low;
+
+ low = addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24);
+ high = addr[4] | (addr[5] << 8);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W32(MAC0, low);
+ RTL_W32(MAC4, high);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ rtl_rar_set(tp, dev->dev_addr);
+
+ return 0;
+}
+
+static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ return netif_running(dev) ? tp->do_ioctl(tp, data, cmd) : -ENODEV;
+}
+
+static int rtl_xmii_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = 32; /* Internal PHY */
+ return 0;
+
+ case SIOCGMIIREG:
+ data->val_out = mdio_read(tp->mmio_addr, data->reg_num & 0x1f);
+ return 0;
+
+ case SIOCSMIIREG:
+ mdio_write(tp->mmio_addr, data->reg_num & 0x1f, data->val_in);
+ return 0;
+ }
+ return -EOPNOTSUPP;
+}
+
+static int rtl_tbi_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+{
+ return -EOPNOTSUPP;
+}
+
+static const struct rtl_cfg_info {
+ void (*hw_start)(struct net_device *);
+ unsigned int region;
+ unsigned int align;
+ u16 intr_event;
+ u16 napi_event;
+ unsigned features;
+ u8 default_ver;
+} rtl_cfg_infos [] = {
+ [RTL_CFG_0] = {
+ .hw_start = rtl_hw_start_8169,
+ .region = 1,
+ .align = 0,
+ .intr_event = SYSErr | LinkChg | RxOverflow |
+ RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_GMII,
+ .default_ver = RTL_GIGA_MAC_VER_01,
+ },
+ [RTL_CFG_1] = {
+ .hw_start = rtl_hw_start_8168,
+ .region = 2,
+ .align = 8,
+ .intr_event = SYSErr | LinkChg | RxOverflow |
+ TxErr | TxOK | RxOK | RxErr,
+ .napi_event = TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI,
+ .default_ver = RTL_GIGA_MAC_VER_11,
+ },
+ [RTL_CFG_2] = {
+ .hw_start = rtl_hw_start_8101,
+ .region = 2,
+ .align = 8,
+ .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout |
+ RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_MSI,
+ .default_ver = RTL_GIGA_MAC_VER_13,
+ }
+};
+
+/* Cfg9346_Unlock assumed. */
+static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr,
+ const struct rtl_cfg_info *cfg)
+{
+ unsigned msi = 0;
+ u8 cfg2;
+
+ cfg2 = RTL_R8(Config2) & ~MSIEnable;
+ if (cfg->features & RTL_FEATURE_MSI) {
+ if (pci_enable_msi(pdev)) {
+ dev_info(&pdev->dev, "no MSI. Back to INTx.\n");
+ } else {
+ cfg2 |= MSIEnable;
+ msi = RTL_FEATURE_MSI;
+ }
+ }
+ RTL_W8(Config2, cfg2);
+ return msi;
+}
+
+static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
+{
+ if (tp->features & RTL_FEATURE_MSI) {
+ pci_disable_msi(pdev);
+ tp->features &= ~RTL_FEATURE_MSI;
+ }
+}
+
+static const struct net_device_ops rtl8169_netdev_ops = {
+ .ndo_open = rtl8169_open,
+ .ndo_stop = rtl8169_close,
+ .ndo_get_stats = rtl8169_get_stats,
+ .ndo_start_xmit = rtl8169_start_xmit,
+ .ndo_tx_timeout = rtl8169_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = rtl8169_change_mtu,
+ .ndo_set_mac_address = rtl_set_mac_address,
+ .ndo_do_ioctl = rtl8169_ioctl,
+ .ndo_set_multicast_list = rtl_set_rx_mode,
+#ifdef CONFIG_R8169_VLAN
+ .ndo_vlan_rx_register = rtl8169_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8169_netpoll,
+#endif
+
+};
+
+static int __devinit
+rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
+ const unsigned int region = cfg->region;
+ struct rtl8169_private *tp;
+ struct mii_if_info *mii;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ unsigned int i;
+ int rc;
+
+ if (netif_msg_drv(&debug)) {
+ printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
+ MODULENAME, RTL8169_VERSION);
+ }
+
+ dev = alloc_etherdev(sizeof (*tp));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&pdev->dev, "unable to alloc new ethernet\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ dev->netdev_ops = &rtl8169_netdev_ops;
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+ tp->pci_dev = pdev;
+ tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
+
+ mii = &tp->mii;
+ mii->dev = dev;
+ mii->mdio_read = rtl_mdio_read;
+ mii->mdio_write = rtl_mdio_write;
+ mii->phy_id_mask = 0x1f;
+ mii->reg_num_mask = 0x1f;
+ mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII);
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device(pdev);
+ if (rc < 0) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "enable failure\n");
+ goto err_out_free_dev_1;
+ }
+
+ rc = pci_set_mwi(pdev);
+ if (rc < 0)
+ goto err_out_disable_2;
+
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "region #%d not an MMIO resource, aborting\n",
+ region);
+ }
+ rc = -ENODEV;
+ goto err_out_mwi_3;
+ }
+
+ /* check for weird/broken PCI region reporting */
+ if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "Invalid PCI region size(s), aborting\n");
+ }
+ rc = -ENODEV;
+ goto err_out_mwi_3;
+ }
+
+ rc = pci_request_regions(pdev, MODULENAME);
+ if (rc < 0) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "could not request regions.\n");
+ goto err_out_mwi_3;
+ }
+
+ tp->cp_cmd = PCIMulRW | RxChkSum;
+
+ if ((sizeof(dma_addr_t) > 4) &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
+ tp->cp_cmd |= PCIDAC;
+ dev->features |= NETIF_F_HIGHDMA;
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc < 0) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "DMA configuration failed.\n");
+ }
+ goto err_out_free_res_4;
+ }
+ }
+
+ /* ioremap MMIO region */
+ ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
+ if (!ioaddr) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
+ rc = -EIO;
+ goto err_out_free_res_4;
+ }
+
+ tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (!tp->pcie_cap && netif_msg_probe(tp))
+ dev_info(&pdev->dev, "no PCI Express capability\n");
+
+ RTL_W16(IntrMask, 0x0000);
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 0; i < 100; i++) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ msleep_interruptible(1);
+ }
+
+ RTL_W16(IntrStatus, 0xffff);
+
+ pci_set_master(pdev);
+
+ /* Identify chip attached to board */
+ rtl8169_get_mac_version(tp, ioaddr);
+
+ /* Use appropriate default if unknown */
+ if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+ if (netif_msg_probe(tp)) {
+ dev_notice(&pdev->dev,
+ "unknown MAC, using family default\n");
+ }
+ tp->mac_version = cfg->default_ver;
+ }
+
+ rtl8169_print_mac_version(tp);
+
+ for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
+ if (tp->mac_version == rtl_chip_info[i].mac_version)
+ break;
+ }
+ if (i == ARRAY_SIZE(rtl_chip_info)) {
+ dev_err(&pdev->dev,
+ "driver bug, MAC version not found in rtl_chip_info\n");
+ goto err_out_msi_5;
+ }
+ tp->chipset = i;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+ RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+ if ((RTL_R8(Config3) & (LinkUp | MagicPacket)) != 0)
+ tp->features |= RTL_FEATURE_WOL;
+ if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0)
+ tp->features |= RTL_FEATURE_WOL;
+ tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
+ (RTL_R8(PHYstatus) & TBI_Enable)) {
+ tp->set_speed = rtl8169_set_speed_tbi;
+ tp->get_settings = rtl8169_gset_tbi;
+ tp->phy_reset_enable = rtl8169_tbi_reset_enable;
+ tp->phy_reset_pending = rtl8169_tbi_reset_pending;
+ tp->link_ok = rtl8169_tbi_link_ok;
+ tp->do_ioctl = rtl_tbi_ioctl;
+
+ tp->phy_1000_ctrl_reg = ADVERTISE_1000FULL; /* Implied by TBI */
+ } else {
+ tp->set_speed = rtl8169_set_speed_xmii;
+ tp->get_settings = rtl8169_gset_xmii;
+ tp->phy_reset_enable = rtl8169_xmii_reset_enable;
+ tp->phy_reset_pending = rtl8169_xmii_reset_pending;
+ tp->link_ok = rtl8169_xmii_link_ok;
+ tp->do_ioctl = rtl_xmii_ioctl;
+ }
+
+ spin_lock_init(&tp->lock);
+
+ tp->mmio_addr = ioaddr;
+
+ /* Get MAC address */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ dev->dev_addr[i] = RTL_R8(MAC0 + i);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) ioaddr;
+
+ netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
+
+#ifdef CONFIG_R8169_VLAN
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+#endif
+
+ tp->intr_mask = 0xffff;
+ tp->align = cfg->align;
+ tp->hw_start = cfg->hw_start;
+ tp->intr_event = cfg->intr_event;
+ tp->napi_event = cfg->napi_event;
+
+ init_timer(&tp->timer);
+ tp->timer.data = (unsigned long) dev;
+ tp->timer.function = rtl8169_phy_timer;
+
+ // offer device to EtherCAT master module
+ tp->ecdev = ecdev_offer(dev, ec_poll, THIS_MODULE);
+
+ if (!tp->ecdev) {
+ rc = register_netdev(dev);
+ if (rc < 0)
+ goto err_out_msi_5;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ if (netif_msg_probe(tp)) {
+ u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
+
+ printk(KERN_INFO "%s: %s at 0x%lx, "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
+ "XID %08x IRQ %d\n",
+ dev->name,
+ rtl_chip_info[tp->chipset].name,
+ dev->base_addr,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5], xid, dev->irq);
+ }
+
+ rtl8169_init_phy(dev, tp);
+
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
+ device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
+ if (tp->ecdev && ecdev_open(tp->ecdev)) {
+ ecdev_withdraw(tp->ecdev);
+ goto err_out_msi_5;
+ }
+
+out:
+ return rc;
+
+err_out_msi_5:
+ rtl_disable_msi(pdev, tp);
+ iounmap(ioaddr);
+err_out_free_res_4:
+ pci_release_regions(pdev);
+err_out_mwi_3:
+ pci_clear_mwi(pdev);
+err_out_disable_2:
+ pci_disable_device(pdev);
+err_out_free_dev_1:
+ free_netdev(dev);
+ goto out;
+}
+
+static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ flush_scheduled_work();
+
+ if (tp->ecdev) {
+ ecdev_close(tp->ecdev);
+ ecdev_withdraw(tp->ecdev);
+ } else {
+ unregister_netdev(dev);
+ }
+
+ /* restore original MAC address */
+ rtl_rar_set(tp, dev->perm_addr);
+
+ rtl_disable_msi(pdev, tp);
+ rtl8169_release_board(pdev, dev, tp->mmio_addr);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
+ unsigned int mtu)
+{
+ unsigned int max_frame = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ if (max_frame != 16383)
+ printk(KERN_WARNING "WARNING! Changing of MTU on this NIC"
+ "May lead to frame reception errors!\n");
+
+ tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
+}
+
+static int rtl8169_open(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ int retval = -ENOMEM;
+
+
+ /*
+ * Note that we use a magic value here, its wierd I know
+ * its done because, some subset of rtl8169 hardware suffers from
+ * a problem in which frames received that are longer than
+ * the size set in RxMaxSize register return garbage sizes
+ * when received. To avoid this we need to turn off filtering,
+ * which is done by setting a value of 16383 in the RxMaxSize register
+ * and allocating 16k frames to handle the largest possible rx value
+ * thats what the magic math below does.
+ */
+ rtl8169_set_rxbufsize(tp, 16383 - VLAN_ETH_HLEN - ETH_FCS_LEN);
+
+ /*
+ * Rx and Tx desscriptors needs 256 bytes alignment.
+ * pci_alloc_consistent provides more.
+ */
+ tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
+ &tp->TxPhyAddr);
+ if (!tp->TxDescArray)
+ goto out;
+
+ tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
+ &tp->RxPhyAddr);
+ if (!tp->RxDescArray)
+ goto err_free_tx_0;
+
+ retval = rtl8169_init_ring(dev);
+ if (retval < 0)
+ goto err_free_rx_1;
+
+ INIT_DELAYED_WORK(&tp->task, NULL);
+
+ smp_mb();
+
+ if (!tp->ecdev) {
+ retval = request_irq(dev->irq, rtl8169_interrupt,
+ (tp->features & RTL_FEATURE_MSI) ? 0 : IRQF_SHARED,
+ dev->name, dev);
+ if (retval < 0)
+ goto err_release_ring_2;
+
+ napi_enable(&tp->napi);
+
+ }
+
+ rtl_hw_start(dev);
+
+ rtl8169_request_timer(dev);
+
+ rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+out:
+ return retval;
+
+err_release_ring_2:
+ rtl8169_rx_clear(tp);
+err_free_rx_1:
+ pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+err_free_tx_0:
+ pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
+ goto out;
+}
+
+static void rtl8169_hw_reset(void __iomem *ioaddr)
+{
+ /* Disable interrupts */
+ rtl8169_irq_mask_and_ack(ioaddr);
+
+ /* Reset the chipset */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+}
+
+static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 cfg = rtl8169_rx_config;
+
+ cfg |= (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ RTL_W32(RxConfig, cfg);
+
+ /* Set DMA burst size and Interframe Gap Time */
+ RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
+ (InterFrameGap << TxInterFrameGapShift));
+}
+
+static void rtl_hw_start(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 0; i < 100; i++) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ msleep_interruptible(1);
+ }
+
+ tp->hw_start(dev);
+
+ if (!tp->ecdev)
+ netif_start_queue(dev);
+}
+
+
+static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ /*
+ * Magic spell: some iop3xx ARM board needs the TxDescAddrHigh
+ * register to be written before TxDescAddrLow to work.
+ * Switching from MMIO to I/O access fixes the issue as well.
+ */
+ RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr) >> 32);
+ RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_BIT_MASK(32));
+ RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr) >> 32);
+ RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_BIT_MASK(32));
+}
+
+static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
+{
+ u16 cmd;
+
+ cmd = RTL_R16(CPlusCmd);
+ RTL_W16(CPlusCmd, cmd);
+ return cmd;
+}
+
+static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
+{
+ /* Low hurts. Let's disable the filtering. */
+ RTL_W16(RxMaxSize, rx_buf_sz + 1);
+}
+
+static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
+{
+ static const struct {
+ u32 mac_version;
+ u32 clk;
+ u32 val;
+ } cfg2_info [] = {
+ { RTL_GIGA_MAC_VER_05, PCI_Clock_33MHz, 0x000fff00 }, // 8110SCd
+ { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
+ { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
+ { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
+ }, *p = cfg2_info;
+ unsigned int i;
+ u32 clk;
+
+ clk = RTL_R8(Config2) & PCI_Clock_66MHz;
+ for (i = 0; i < ARRAY_SIZE(cfg2_info); i++, p++) {
+ if ((p->mac_version == mac_version) && (p->clk == clk)) {
+ RTL_W32(0x7c, p->val);
+ break;
+ }
+ }
+}
+
+static void rtl_hw_start_8169(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | PCIMulRW);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x08);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ rtl_set_rx_tx_config_registers(tp);
+
+ tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ dprintk("Set MAC Reg C+CR Offset 0xE0. "
+ "Bit-3 and bit-14 MUST be 1\n");
+ tp->cp_cmd |= (1 << 14);
+ }
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ rtl8169_set_magic_reg(ioaddr, tp->mac_version);
+
+ /*
+ * Undocumented corner. Supposedly:
+ * (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets
+ */
+ RTL_W16(IntrMitigate, 0x0000);
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ rtl_set_rx_tx_config_registers(tp);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ /* Initially a 10 us delay. Turned it into a PCI commit. - FR */
+ RTL_R8(IntrMask);
+
+ RTL_W32(RxMissed, 0);
+
+ rtl_set_rx_mode(dev);
+
+ /* no early-rx interrupts */
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ if (!tp->ecdev)
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+static void rtl_tx_performance_tweak(struct pci_dev *pdev, u16 force)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ u16 ctl;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &ctl);
+ ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | force;
+ pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+}
+
+static void rtl_csi_access_enable(void __iomem *ioaddr)
+{
+ u32 csi;
+
+ csi = rtl_csi_read(ioaddr, 0x070c) & 0x00ffffff;
+ rtl_csi_write(ioaddr, 0x070c, csi | 0x27000000);
+}
+
+struct ephy_info {
+ unsigned int offset;
+ u16 mask;
+ u16 bits;
+};
+
+static void rtl_ephy_init(void __iomem *ioaddr, const struct ephy_info *e, int len)
+{
+ u16 w;
+
+ while (len-- > 0) {
+ w = (rtl_ephy_read(ioaddr, e->offset) & ~e->mask) | e->bits;
+ rtl_ephy_write(ioaddr, e->offset, w);
+ e++;
+ }
+}
+
+static void rtl_disable_clock_request(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ u16 ctl;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_LNKCTL, &ctl);
+ ctl &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
+ pci_write_config_word(pdev, cap + PCI_EXP_LNKCTL, ctl);
+ }
+}
+
+#define R8168_CPCMD_QUIRK_MASK (\
+ EnableBist | \
+ Mac_dbgo_oe | \
+ Force_half_dup | \
+ Force_rxflow_en | \
+ Force_txflow_en | \
+ Cxpl_dbg_sel | \
+ ASF | \
+ PktCntrDisable | \
+ Mac_dbgo_sel)
+
+static void rtl_hw_start_8168bb(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+
+ rtl_tx_performance_tweak(pdev,
+ (0x5 << MAX_READ_REQUEST_SHIFT) | PCI_EXP_DEVCTL_NOSNOOP_EN);
+}
+
+static void rtl_hw_start_8168bef(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8168bb(ioaddr, pdev);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ RTL_W8(Config4, RTL_R8(Config4) & ~(1 << 0));
+}
+
+static void __rtl_hw_start_8168cp(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ RTL_W8(Config1, RTL_R8(Config1) | Speed_down);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ rtl_disable_clock_request(pdev);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168cp[] = {
+ { 0x01, 0, 0x0001 },
+ { 0x02, 0x0800, 0x1000 },
+ { 0x03, 0, 0x0042 },
+ { 0x06, 0x0080, 0x0000 },
+ { 0x07, 0, 0x2000 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_ephy_init(ioaddr, e_info_8168cp, ARRAY_SIZE(e_info_8168cp));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168cp_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168cp_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ /* Magic. */
+ RTL_W8(DBG_REG, 0x20);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168c_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168c_1[] = {
+ { 0x02, 0x0800, 0x1000 },
+ { 0x03, 0, 0x0002 },
+ { 0x06, 0x0080, 0x0000 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(DBG_REG, 0x06 | FIX_NAK_1 | FIX_NAK_2);
+
+ rtl_ephy_init(ioaddr, e_info_8168c_1, ARRAY_SIZE(e_info_8168c_1));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168c_2[] = {
+ { 0x01, 0, 0x0001 },
+ { 0x03, 0x0400, 0x0220 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_ephy_init(ioaddr, e_info_8168c_2, ARRAY_SIZE(e_info_8168c_2));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8168c_2(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_4(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168d(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_disable_clock_request(pdev);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ RTL_W16(IntrMitigate, 0x5151);
+
+ /* Work around for RxFIFO overflow. */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_11) {
+ tp->intr_event |= RxFIFOOver | PCSTimeout;
+ tp->intr_event &= ~RxOverflow;
+ }
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ rtl_set_rx_mode(dev);
+
+ RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
+ (InterFrameGap << TxInterFrameGapShift));
+
+ RTL_R8(IntrMask);
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_11:
+ rtl_hw_start_8168bb(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ rtl_hw_start_8168bef(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_18:
+ rtl_hw_start_8168cp_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_19:
+ rtl_hw_start_8168c_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_20:
+ rtl_hw_start_8168c_2(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_21:
+ rtl_hw_start_8168c_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_22:
+ rtl_hw_start_8168c_4(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_23:
+ rtl_hw_start_8168cp_2(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_24:
+ rtl_hw_start_8168cp_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ rtl_hw_start_8168d(ioaddr, pdev);
+ break;
+
+ default:
+ printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
+ dev->name, tp->mac_version);
+ break;
+ }
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+ if (!tp->ecdev)
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+#define R810X_CPCMD_QUIRK_MASK (\
+ EnableBist | \
+ Mac_dbgo_oe | \
+ Force_half_dup | \
+ Force_rxflow_en | \
+ Force_txflow_en | \
+ Cxpl_dbg_sel | \
+ ASF | \
+ PktCntrDisable | \
+ PCIDAC | \
+ PCIMulRW)
+
+static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8102e_1[] = {
+ { 0x01, 0, 0x6e65 },
+ { 0x02, 0, 0x091f },
+ { 0x03, 0, 0xc2f9 },
+ { 0x06, 0, 0xafb5 },
+ { 0x07, 0, 0x0e00 },
+ { 0x19, 0, 0xec80 },
+ { 0x01, 0, 0x2e65 },
+ { 0x01, 0, 0x6e65 }
+ };
+ u8 cfg1;
+
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(DBG_REG, FIX_NAK_1);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(Config1,
+ LEDS1 | LEDS0 | Speed_down | MEMMAP | IOMAP | VPD | PMEnable);
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ cfg1 = RTL_R8(Config1);
+ if ((cfg1 & LEDS0) && (cfg1 & LEDS1))
+ RTL_W8(Config1, cfg1 & ~LEDS0);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
+
+ rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1));
+}
+
+static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable);
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8102e_2(ioaddr, pdev);
+
+ rtl_ephy_write(ioaddr, 0x03, 0xc2f9);
+}
+
+static void rtl_hw_start_8101(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_NOSNOOP_EN);
+ }
+ }
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_07:
+ rtl_hw_start_8102e_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_08:
+ rtl_hw_start_8102e_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_09:
+ rtl_hw_start_8102e_2(ioaddr, pdev);
+ break;
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ RTL_W16(IntrMitigate, 0x0000);
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ rtl_set_rx_tx_config_registers(tp);
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ RTL_R8(IntrMask);
+
+ rtl_set_rx_mode(dev);
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
+
+ if (!tp->ecdev)
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int ret = 0;
+
+ if (new_mtu < ETH_ZLEN || new_mtu > SafeMtu)
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ if (!netif_running(dev))
+ goto out;
+
+ rtl8169_down(dev);
+
+ rtl8169_set_rxbufsize(tp, dev->mtu);
+
+ ret = rtl8169_init_ring(dev);
+ if (ret < 0)
+ goto out;
+
+ napi_enable(&tp->napi);
+
+ rtl_hw_start(dev);
+
+ rtl8169_request_timer(dev);
+
+out:
+ return ret;
+}
+
+static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc)
+{
+ desc->addr = cpu_to_le64(0x0badbadbadbadbadull);
+ desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask);
+}
+
+static void rtl8169_free_rx_skb(struct rtl8169_private *tp,
+ struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+
+ pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(*sk_buff);
+ *sk_buff = NULL;
+ rtl8169_make_unusable_by_asic(desc);
+}
+
+static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+ u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
+
+ desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz);
+}
+
+static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+ u32 rx_buf_sz)
+{
+ desc->addr = cpu_to_le64(mapping);
+ wmb();
+ rtl8169_mark_to_asic(desc, rx_buf_sz);
+}
+
+static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
+ struct net_device *dev,
+ struct RxDesc *desc, int rx_buf_sz,
+ unsigned int align)
+{
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ unsigned int pad;
+
+ pad = align ? align : NET_IP_ALIGN;
+
+ skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+ if (!skb)
+ goto err_out;
+
+ skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
+
+ mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
+out:
+ return skb;
+
+err_out:
+ rtl8169_make_unusable_by_asic(desc);
+ goto out;
+}
+
+static void rtl8169_rx_clear(struct rtl8169_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (tp->Rx_skbuff[i]) {
+ rtl8169_free_rx_skb(tp, tp->Rx_skbuff + i,
+ tp->RxDescArray + i);
+ }
+ }
+}
+
+static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
+ u32 start, u32 end)
+{
+ u32 cur;
+
+ for (cur = start; end - cur != 0; cur++) {
+ struct sk_buff *skb;
+ unsigned int i = cur % NUM_RX_DESC;
+
+ WARN_ON((s32)(end - cur) < 0);
+
+ if (tp->Rx_skbuff[i])
+ continue;
+
+ skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
+ tp->RxDescArray + i,
+ tp->rx_buf_sz, tp->align);
+ if (!skb)
+ break;
+
+ tp->Rx_skbuff[i] = skb;
+ }
+ return cur - start;
+}
+
+static inline void rtl8169_mark_as_last_descriptor(struct RxDesc *desc)
+{
+ desc->opts1 |= cpu_to_le32(RingEnd);
+}
+
+static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
+{
+ tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int rtl8169_init_ring(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ rtl8169_init_ring_indexes(tp);
+
+ memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
+ memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+ if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ goto err_out;
+
+ rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
+
+ return 0;
+
+err_out:
+ rtl8169_rx_clear(tp);
+ return -ENOMEM;
+}
+
+static void rtl8169_unmap_tx_skb(struct pci_dev *pdev, struct ring_info *tx_skb,
+ struct TxDesc *desc)
+{
+ unsigned int len = tx_skb->len;
+
+ pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+ desc->opts1 = 0x00;
+ desc->opts2 = 0x00;
+ desc->addr = 0x00;
+ tx_skb->len = 0;
+}
+
+static void rtl8169_tx_clear(struct rtl8169_private *tp)
+{
+ unsigned int i;
+
+ for (i = tp->dirty_tx; i < tp->dirty_tx + NUM_TX_DESC; i++) {
+ unsigned int entry = i % NUM_TX_DESC;
+ struct ring_info *tx_skb = tp->tx_skb + entry;
+ unsigned int len = tx_skb->len;
+
+ if (len) {
+ struct sk_buff *skb = tx_skb->skb;
+
+ rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb,
+ tp->TxDescArray + entry);
+ if (skb) {
+ if (!tp->ecdev)
+ dev_kfree_skb(skb);
+ tx_skb->skb = NULL;
+ }
+ tp->dev->stats.tx_dropped++;
+ }
+ }
+ tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void rtl8169_schedule_work(struct net_device *dev, work_func_t task)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ PREPARE_DELAYED_WORK(&tp->task, task);
+ schedule_delayed_work(&tp->task, 4);
+}
+
+static void rtl8169_wait_for_quiescence(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ synchronize_irq(dev->irq);
+
+ /* Wait for any pending NAPI task to complete */
+ napi_disable(&tp->napi);
+
+ rtl8169_irq_mask_and_ack(ioaddr);
+
+ tp->intr_mask = 0xffff;
+ RTL_W16(IntrMask, tp->intr_event);
+ napi_enable(&tp->napi);
+}
+
+static void rtl8169_reinit_task(struct work_struct *work)
+{
+ struct rtl8169_private *tp =
+ container_of(work, struct rtl8169_private, task.work);
+ struct net_device *dev = tp->dev;
+ int ret;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ rtl8169_wait_for_quiescence(dev);
+ rtl8169_close(dev);
+
+ ret = rtl8169_open(dev);
+ if (unlikely(ret < 0)) {
+ if (net_ratelimit() && netif_msg_drv(tp)) {
+ printk(KERN_ERR PFX "%s: reinit failure (status = %d)."
+ " Rescheduling.\n", dev->name, ret);
+ }
+ rtl8169_schedule_work(dev, rtl8169_reinit_task);
+ }
+
+out_unlock:
+ rtnl_unlock();
+}
+
+static void rtl8169_reset_task(struct work_struct *work)
+{
+ struct rtl8169_private *tp =
+ container_of(work, struct rtl8169_private, task.work);
+ struct net_device *dev = tp->dev;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ rtl8169_wait_for_quiescence(dev);
+
+ rtl8169_rx_interrupt(dev, tp, tp->mmio_addr, ~(u32)0);
+ rtl8169_tx_clear(tp);
+
+ if (tp->dirty_rx == tp->cur_rx) {
+ rtl8169_init_ring_indexes(tp);
+ rtl_hw_start(dev);
+ netif_wake_queue(dev);
+ rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+ } else {
+ if (net_ratelimit() && netif_msg_intr(tp)) {
+ printk(KERN_EMERG PFX "%s: Rx buffers shortage\n",
+ dev->name);
+ }
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ }
+
+out_unlock:
+ rtnl_unlock();
+}
+
+static void rtl8169_tx_timeout(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev)
+ return;
+
+ rtl8169_hw_reset(tp->mmio_addr);
+
+ /* Let's wait a bit while any (async) irq lands on */
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+}
+
+static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
+ u32 opts1)
+{
+ struct skb_shared_info *info = skb_shinfo(skb);
+ unsigned int cur_frag, entry;
+ struct TxDesc * uninitialized_var(txd);
+
+ entry = tp->cur_tx;
+ for (cur_frag = 0; cur_frag < info->nr_frags; cur_frag++) {
+ skb_frag_t *frag = info->frags + cur_frag;
+ dma_addr_t mapping;
+ u32 status, len;
+ void *addr;
+
+ entry = (entry + 1) % NUM_TX_DESC;
+
+ txd = tp->TxDescArray + entry;
+ len = frag->size;
+ addr = ((void *) page_address(frag->page)) + frag->page_offset;
+ mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+
+ /* anti gcc 2.95.3 bugware (sic) */
+ status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+
+ txd->opts1 = cpu_to_le32(status);
+ txd->addr = cpu_to_le64(mapping);
+
+ tp->tx_skb[entry].len = len;
+ }
+
+ if (cur_frag) {
+ tp->tx_skb[entry].skb = skb;
+ txd->opts1 |= cpu_to_le32(LastFrag);
+ }
+
+ return cur_frag;
+}
+
+static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev)
+{
+ if (dev->features & NETIF_F_TSO) {
+ u32 mss = skb_shinfo(skb)->gso_size;
+
+ if (mss)
+ return LargeSend | ((mss & MSSMask) << MSSShift);
+ }
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ const struct iphdr *ip = ip_hdr(skb);
+
+ if (ip->protocol == IPPROTO_TCP)
+ return IPCS | TCPCS;
+ else if (ip->protocol == IPPROTO_UDP)
+ return IPCS | UDPCS;
+ WARN_ON(1); /* we need a WARN() */
+ }
+ return 0;
+}
+
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned int frags, entry = tp->cur_tx % NUM_TX_DESC;
+ struct TxDesc *txd = tp->TxDescArray + entry;
+ void __iomem *ioaddr = tp->mmio_addr;
+ dma_addr_t mapping;
+ u32 status, len;
+ u32 opts1;
+
+ if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
+ if (netif_msg_drv(tp)) {
+ printk(KERN_ERR
+ "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ }
+ goto err_stop;
+ }
+
+ if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
+ goto err_stop;
+
+ opts1 = DescOwn | rtl8169_tso_csum(skb, dev);
+
+ frags = rtl8169_xmit_frags(tp, skb, opts1);
+ if (frags) {
+ len = skb_headlen(skb);
+ opts1 |= FirstFrag;
+ } else {
+ len = skb->len;
+ opts1 |= FirstFrag | LastFrag;
+ tp->tx_skb[entry].skb = skb;
+ }
+
+ mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tp->tx_skb[entry].len = len;
+ txd->addr = cpu_to_le64(mapping);
+ txd->opts2 = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
+
+ wmb();
+
+ /* anti gcc 2.95.3 bugware (sic) */
+ status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+ txd->opts1 = cpu_to_le32(status);
+
+ tp->cur_tx += frags + 1;
+
+ smp_wmb();
+
+ RTL_W8(TxPoll, NPQ); /* set polling bit */
+
+ if (!tp->ecdev) {
+ if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
+ netif_stop_queue(dev);
+ smp_rmb();
+ if (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)
+ netif_wake_queue(dev);
+ }
+ }
+
+ return NETDEV_TX_OK;
+
+err_stop:
+ if (!tp->ecdev)
+ netif_stop_queue(dev);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_BUSY;
+}
+
+static void rtl8169_pcierr_interrupt(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 pci_status, pci_cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+ pci_read_config_word(pdev, PCI_STATUS, &pci_status);
+
+ if (netif_msg_intr(tp)) {
+ printk(KERN_ERR
+ "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
+ dev->name, pci_cmd, pci_status);
+ }
+
+ /*
+ * The recovery sequence below admits a very elaborated explanation:
+ * - it seems to work;
+ * - I did not see what else could be done;
+ * - it makes iop3xx happy.
+ *
+ * Feel free to adjust to your needs.
+ */
+ if (pdev->broken_parity_status)
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ else
+ pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+
+ pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
+
+ pci_write_config_word(pdev, PCI_STATUS,
+ pci_status & (PCI_STATUS_DETECTED_PARITY |
+ PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT));
+
+ /* The infamous DAC f*ckup only happens at boot time */
+ if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
+ if (netif_msg_intr(tp))
+ printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name);
+ tp->cp_cmd &= ~PCIDAC;
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ dev->features &= ~NETIF_F_HIGHDMA;
+ }
+
+ rtl8169_hw_reset(ioaddr);
+
+ rtl8169_schedule_work(dev, rtl8169_reinit_task);
+}
+
+static void rtl8169_tx_interrupt(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned int dirty_tx, tx_left;
+
+ dirty_tx = tp->dirty_tx;
+ smp_rmb();
+ tx_left = tp->cur_tx - dirty_tx;
+
+ while (tx_left > 0) {
+ unsigned int entry = dirty_tx % NUM_TX_DESC;
+ struct ring_info *tx_skb = tp->tx_skb + entry;
+ u32 len = tx_skb->len;
+ u32 status;
+
+ rmb();
+ status = le32_to_cpu(tp->TxDescArray[entry].opts1);
+ if (status & DescOwn)
+ break;
+
+ dev->stats.tx_bytes += len;
+ dev->stats.tx_packets++;
+
+ rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry);
+
+ if (status & LastFrag) {
+ if (!tp->ecdev)
+ dev_kfree_skb(tx_skb->skb);
+ tx_skb->skb = NULL;
+ }
+ dirty_tx++;
+ tx_left--;
+ }
+
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ smp_wmb();
+ if (!tp->ecdev && netif_queue_stopped(dev) &&
+ (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) {
+ netif_wake_queue(dev);
+ }
+ /*
+ * 8168 hack: TxPoll requests are lost when the Tx packets are
+ * too close. Let's kick an extra TxPoll request when a burst
+ * of start_xmit activity is detected (if it is not detected,
+ * it is slow enough). -- FR
+ */
+ smp_rmb();
+ if (tp->cur_tx != dirty_tx)
+ RTL_W8(TxPoll, NPQ);
+ }
+}
+
+static inline int rtl8169_fragmented_frame(u32 status)
+{
+ return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
+}
+
+static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
+{
+ u32 opts1 = le32_to_cpu(desc->opts1);
+ u32 status = opts1 & RxProtoMask;
+
+ if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
+ ((status == RxProtoUDP) && !(opts1 & UDPFail)) ||
+ ((status == RxProtoIP) && !(opts1 & IPFail)))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+}
+
+static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
+ struct rtl8169_private *tp, int pkt_size,
+ dma_addr_t addr)
+{
+ struct sk_buff *skb;
+ bool done = false;
+
+ if (pkt_size >= rx_copybreak)
+ goto out;
+
+ skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
+ if (!skb)
+ goto out;
+
+ pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
+ PCI_DMA_FROMDEVICE);
+ skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
+ *sk_buff = skb;
+ done = true;
+out:
+ return done;
+}
+
+static int rtl8169_rx_interrupt(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr, u32 budget)
+{
+ unsigned int cur_rx, rx_left;
+ unsigned int delta, count;
+
+ cur_rx = tp->cur_rx;
+ rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+ rx_left = min(rx_left, budget);
+
+ for (; rx_left > 0; rx_left--, cur_rx++) {
+ unsigned int entry = cur_rx % NUM_RX_DESC;
+ struct RxDesc *desc = tp->RxDescArray + entry;
+ u32 status;
+
+ rmb();
+ status = le32_to_cpu(desc->opts1);
+
+ if (status & DescOwn)
+ break;
+ if (unlikely(status & RxRES)) {
+ if (netif_msg_rx_err(tp)) {
+ printk(KERN_INFO
+ "%s: Rx ERROR. status = %08x\n",
+ dev->name, status);
+ }
+ dev->stats.rx_errors++;
+ if (status & (RxRWT | RxRUNT))
+ dev->stats.rx_length_errors++;
+ if (status & RxCRC)
+ dev->stats.rx_crc_errors++;
+ if (status & RxFOVF) {
+ if (!tp->ecdev)
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ dev->stats.rx_fifo_errors++;
+ }
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ } else {
+ struct sk_buff *skb = tp->Rx_skbuff[entry];
+ dma_addr_t addr = le64_to_cpu(desc->addr);
+ int pkt_size = (status & 0x00001FFF) - 4;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ /*
+ * The driver does not support incoming fragmented
+ * frames. They are seen as a symptom of over-mtu
+ * sized frames.
+ */
+ if (unlikely(rtl8169_fragmented_frame(status))) {
+ dev->stats.rx_dropped++;
+ dev->stats.rx_length_errors++;
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ continue;
+ }
+
+ rtl8169_rx_csum(skb, desc);
+
+ if (tp->ecdev) {
+ pci_dma_sync_single_for_cpu(pdev, addr, pkt_size,
+ PCI_DMA_FROMDEVICE);
+
+ ecdev_receive(tp->ecdev, skb->data, pkt_size);
+
+ pci_dma_sync_single_for_device(pdev, addr,
+ pkt_size, PCI_DMA_FROMDEVICE);
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+
+ // No need to detect link status as
+ // long as frames are received: Reset watchdog.
+ tp->ec_watchdog_jiffies = jiffies;
+ } else {
+ if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
+ pci_dma_sync_single_for_device(pdev, addr,
+ pkt_size, PCI_DMA_FROMDEVICE);
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ } else {
+ pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ tp->Rx_skbuff[entry] = NULL;
+ }
+
+ skb_put(skb, pkt_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
+ netif_receive_skb(skb);
+ }
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+ }
+
+ /* Work around for AMD plateform. */
+ if ((desc->opts2 & cpu_to_le32(0xfffe000)) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_05)) {
+ desc->opts2 = 0;
+ cur_rx++;
+ }
+ }
+
+ count = cur_rx - tp->cur_rx;
+ tp->cur_rx = cur_rx;
+
+ if (tp->ecdev) {
+ /* descriptors are cleaned up immediately. */
+ tp->dirty_rx = tp->cur_rx;
+ } else {
+ delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ if (!delta && count && netif_msg_intr(tp))
+ printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name);
+ tp->dirty_rx += delta;
+
+ /*
+ * FIXME: until there is periodic timer to try and refill the ring,
+ * a temporary shortage may definitely kill the Rx process.
+ * - disable the asic to try and avoid an overflow and kick it again
+ * after refill ?
+ * - how do others driver handle this condition (Uh oh...).
+ */
+ if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp))
+ printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name);
+ }
+
+ return count;
+}
+
+static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int handled = 0;
+ int status;
+
+ /* loop handling interrupts until we have no new ones or
+ * we hit a invalid/hotplug case.
+ */
+ status = RTL_R16(IntrStatus);
+ while (status && status != 0xffff) {
+ handled = 1;
+
+ /* Handle all of the error cases first. These will reset
+ * the chip, so just exit the loop.
+ */
+ if (unlikely(!tp->ecdev && !netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ break;
+ }
+
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ break;
+ }
+
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
+
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
+
+ /* We need to see the lastest version of tp->intr_mask to
+ * avoid ignoring an MSI interrupt and having to wait for
+ * another event which may never come.
+ */
+ smp_rmb();
+ if (status & tp->intr_mask & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
+
+ if (likely(napi_schedule_prep(&tp->napi)))
+ __napi_schedule(&tp->napi);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
+ }
+
+ /* We only get a new MSI interrupt when all active irq
+ * sources on the chip have been acknowledged. So, ack
+ * everything we've seen and check if new sources have become
+ * active to avoid blocking all interrupts from the chip.
+ */
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status = RTL_R16(IntrStatus);
+ }
+
+ return IRQ_RETVAL(handled);
+}
+
+static void ec_poll(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ rtl8169_interrupt(pdev->irq, dev);
+ rtl8169_rx_interrupt(dev, tp, tp->mmio_addr, 100); // FIXME
+ rtl8169_tx_interrupt(dev, tp, tp->mmio_addr);
+
+ if (jiffies - tp->ec_watchdog_jiffies >= 2 * HZ) {
+ rtl8169_phy_timer((unsigned long) dev);
+ tp->ec_watchdog_jiffies = jiffies;
+ }
+}
+
+static int rtl8169_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ work_done = rtl8169_rx_interrupt(dev, tp, ioaddr, (u32) budget);
+ rtl8169_tx_interrupt(dev, tp, ioaddr);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ /* We need for force the visibility of tp->intr_mask
+ * for other CPUs, as we can loose an MSI interrupt
+ * and potentially wait for a retransmit timeout if we don't.
+ * The posted write to IntrMask is safe, as it will
+ * eventually make it to the chip and we won't loose anything
+ * until it does.
+ */
+ tp->intr_mask = 0xffff;
+ smp_wmb();
+ RTL_W16(IntrMask, tp->intr_event);
+ }
+
+ return work_done;
+}
+
+static void rtl8169_rx_missed(struct net_device *dev, void __iomem *ioaddr)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (tp->mac_version > RTL_GIGA_MAC_VER_06)
+ return;
+
+ dev->stats.rx_missed_errors += (RTL_R32(RxMissed) & 0xffffff);
+ RTL_W32(RxMissed, 0);
+}
+
+static void rtl8169_down(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int intrmask;
+
+ rtl8169_delete_timer(dev);
+
+ if (!tp->ecdev) {
+ netif_stop_queue(dev);
+
+ napi_disable(&tp->napi);
+
+ }
+
+core_down:
+ if (!tp->ecdev)
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ rtl8169_rx_missed(dev, ioaddr);
+
+ if (!tp->ecdev)
+ spin_unlock_irq(&tp->lock);
+
+ if (!tp->ecdev)
+ synchronize_irq(dev->irq);
+
+ /* Give a racing hard_start_xmit a few cycles to complete. */
+ synchronize_sched(); /* FIXME: should this be synchronize_irq()? */
+
+ /*
+ * And now for the 50k$ question: are IRQ disabled or not ?
+ *
+ * Two paths lead here:
+ * 1) dev->close
+ * -> netif_running() is available to sync the current code and the
+ * IRQ handler. See rtl8169_interrupt for details.
+ * 2) dev->change_mtu
+ * -> rtl8169_poll can not be issued again and re-enable the
+ * interruptions. Let's simply issue the IRQ down sequence again.
+ *
+ * No loop if hotpluged or major error (0xffff).
+ */
+ intrmask = RTL_R16(IntrMask);
+ if (intrmask && (intrmask != 0xffff))
+ goto core_down;
+
+ rtl8169_tx_clear(tp);
+
+ rtl8169_rx_clear(tp);
+}
+
+static int rtl8169_close(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ /* update counters before going down */
+ rtl8169_update_counters(dev);
+
+ rtl8169_down(dev);
+
+ if (!tp->ecdev)
+ free_irq(dev->irq, dev);
+
+ pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+ pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
+ tp->TxDescArray = NULL;
+ tp->RxDescArray = NULL;
+
+ return 0;
+}
+
+static void rtl_set_rx_mode(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int rx_mode;
+ u32 tmp = 0;
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ if (netif_msg_link(tp)) {
+ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ }
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ unsigned int i;
+
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ tmp = rtl8169_rx_config | rx_mode |
+ (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+
+ if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
+ u32 data = mc_filter[0];
+
+ mc_filter[0] = swab32(mc_filter[1]);
+ mc_filter[1] = swab32(data);
+ }
+
+ RTL_W32(MAR0 + 0, mc_filter[0]);
+ RTL_W32(MAR0 + 4, mc_filter[1]);
+
+ RTL_W32(RxConfig, tmp);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+/**
+ * rtl8169_get_stats - Get rtl8169 read/write statistics
+ * @dev: The Ethernet Device to get statistics for
+ *
+ * Get TX/RX statistics for rtl8169
+ */
+static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave(&tp->lock, flags);
+ rtl8169_rx_missed(dev, ioaddr);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+static void rtl8169_net_suspend(struct net_device *dev)
+{
+ if (!netif_running(dev))
+ return;
+
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev)
+ return -EBUSY;
+
+ rtl8169_net_suspend(dev);
+
+ return 0;
+}
+
+static int rtl8169_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (tp->ecdev)
+ return -EBUSY;
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_attach(dev);
+
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+ return 0;
+}
+
+static const struct dev_pm_ops rtl8169_pm_ops = {
+ .suspend = rtl8169_suspend,
+ .resume = rtl8169_resume,
+ .freeze = rtl8169_suspend,
+ .thaw = rtl8169_resume,
+ .poweroff = rtl8169_suspend,
+ .restore = rtl8169_resume,
+};
+
+#define RTL8169_PM_OPS (&rtl8169_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define RTL8169_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
+static void rtl_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl8169_net_suspend(dev);
+
+ /* restore original MAC address */
+ rtl_rar_set(tp, dev->perm_addr);
+
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ spin_unlock_irq(&tp->lock);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ /* WoL fails with some 8168 when the receiver is disabled. */
+ if (tp->features & RTL_FEATURE_WOL) {
+ pci_clear_master(pdev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ }
+
+ pci_wake_from_d3(pdev, true);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+static struct pci_driver rtl8169_pci_driver = {
+ .name = MODULENAME,
+ .id_table = rtl8169_pci_tbl,
+ .probe = rtl8169_init_one,
+ .remove = __devexit_p(rtl8169_remove_one),
+ .shutdown = rtl_shutdown,
+ .driver.pm = RTL8169_PM_OPS,
+};
+
+static int __init rtl8169_init_module(void)
+{
+ return pci_register_driver(&rtl8169_pci_driver);
+}
+
+static void __exit rtl8169_cleanup_module(void)
+{
+ pci_unregister_driver(&rtl8169_pci_driver);
+}
+
+module_init(rtl8169_init_module);
+module_exit(rtl8169_cleanup_module);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/r8169-2.6.33-orig.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,4950 @@
+/*
+ * r8169.c: RealTek 8169/8168/8101 ethernet driver.
+ *
+ * Copyright (c) 2002 ShuChen <shuchen@realtek.com.tw>
+ * Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
+ * Copyright (c) a lot of people too. Please respect their work.
+ *
+ * See MAINTAINERS file for support contact information.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define RTL8169_VERSION "2.3LK-NAPI"
+#define MODULENAME "r8169"
+#define PFX MODULENAME ": "
+
+#ifdef RTL8169_DEBUG
+#define assert(expr) \
+ if (!(expr)) { \
+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr,__FILE__,__func__,__LINE__); \
+ }
+#define dprintk(fmt, args...) \
+ do { printk(KERN_DEBUG PFX fmt, ## args); } while (0)
+#else
+#define assert(expr) do {} while (0)
+#define dprintk(fmt, args...) do {} while (0)
+#endif /* RTL8169_DEBUG */
+
+#define R8169_MSG_DEFAULT \
+ (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN)
+
+#define TX_BUFFS_AVAIL(tp) \
+ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */
+static const int multicast_filter_limit = 32;
+
+/* MAC address length */
+#define MAC_ADDR_LEN 6
+
+#define MAX_READ_REQUEST_SHIFT 12
+#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
+#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
+#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
+
+#define R8169_REGS_SIZE 256
+#define R8169_NAPI_WEIGHT 64
+#define NUM_TX_DESC 64 /* Number of Tx descriptor registers */
+#define NUM_RX_DESC 256 /* Number of Rx descriptor registers */
+#define RX_BUF_SIZE 1536 /* Rx Buffer size */
+#define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
+#define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
+
+#define RTL8169_TX_TIMEOUT (6*HZ)
+#define RTL8169_PHY_TIMEOUT (10*HZ)
+
+#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
+#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG_ADDR 0x0000
+
+/* write/read MMIO register */
+#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define RTL_R8(reg) readb (ioaddr + (reg))
+#define RTL_R16(reg) readw (ioaddr + (reg))
+#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
+
+enum mac_version {
+ RTL_GIGA_MAC_NONE = 0x00,
+ RTL_GIGA_MAC_VER_01 = 0x01, // 8169
+ RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
+ RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
+ RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB
+ RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd
+ RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe
+ RTL_GIGA_MAC_VER_07 = 0x07, // 8102e
+ RTL_GIGA_MAC_VER_08 = 0x08, // 8102e
+ RTL_GIGA_MAC_VER_09 = 0x09, // 8102e
+ RTL_GIGA_MAC_VER_10 = 0x0a, // 8101e
+ RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb
+ RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be
+ RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb
+ RTL_GIGA_MAC_VER_14 = 0x0e, // 8101 ?
+ RTL_GIGA_MAC_VER_15 = 0x0f, // 8101 ?
+ RTL_GIGA_MAC_VER_16 = 0x11, // 8101Ec
+ RTL_GIGA_MAC_VER_17 = 0x10, // 8168Bf
+ RTL_GIGA_MAC_VER_18 = 0x12, // 8168CP
+ RTL_GIGA_MAC_VER_19 = 0x13, // 8168C
+ RTL_GIGA_MAC_VER_20 = 0x14, // 8168C
+ RTL_GIGA_MAC_VER_21 = 0x15, // 8168C
+ RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
+ RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
+ RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
+ RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
+ RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
+ RTL_GIGA_MAC_VER_27 = 0x1b // 8168DP
+};
+
+#define _R(NAME,MAC,MASK) \
+ { .name = NAME, .mac_version = MAC, .RxConfigMask = MASK }
+
+static const struct {
+ const char *name;
+ u8 mac_version;
+ u32 RxConfigMask; /* Clears the bits supported by this chip */
+} rtl_chip_info[] = {
+ _R("RTL8169", RTL_GIGA_MAC_VER_01, 0xff7e1880), // 8169
+ _R("RTL8169s", RTL_GIGA_MAC_VER_02, 0xff7e1880), // 8169S
+ _R("RTL8110s", RTL_GIGA_MAC_VER_03, 0xff7e1880), // 8110S
+ _R("RTL8169sb/8110sb", RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB
+ _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd
+ _R("RTL8169sc/8110sc", RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe
+ _R("RTL8102e", RTL_GIGA_MAC_VER_07, 0xff7e1880), // PCI-E
+ _R("RTL8102e", RTL_GIGA_MAC_VER_08, 0xff7e1880), // PCI-E
+ _R("RTL8102e", RTL_GIGA_MAC_VER_09, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_10, 0xff7e1880), // PCI-E
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139
+ _R("RTL8100e", RTL_GIGA_MAC_VER_14, 0xff7e1880), // PCI-E 8139
+ _R("RTL8100e", RTL_GIGA_MAC_VER_15, 0xff7e1880), // PCI-E 8139
+ _R("RTL8168b/8111b", RTL_GIGA_MAC_VER_17, 0xff7e1880), // PCI-E
+ _R("RTL8101e", RTL_GIGA_MAC_VER_16, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_18, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_19, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_20, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_21, 0xff7e1880), // PCI-E
+ _R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
+ _R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
+ _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880) // PCI-E
+};
+#undef _R
+
+enum cfg_version {
+ RTL_CFG_0 = 0x00,
+ RTL_CFG_1,
+ RTL_CFG_2
+};
+
+static void rtl_hw_start_8169(struct net_device *);
+static void rtl_hw_start_8168(struct net_device *);
+static void rtl_hw_start_8101(struct net_device *);
+
+static struct pci_device_id rtl8169_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
+ { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 },
+ { PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 },
+ { PCI_VENDOR_ID_LINKSYS, 0x1032,
+ PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
+ { 0x0001, 0x8168,
+ PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
+
+/*
+ * we set our copybreak very high so that we don't have
+ * to allocate 16k frames all the time (see note in
+ * rtl8169_open()
+ */
+static int rx_copybreak = 16383;
+static int use_dac;
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+enum rtl_registers {
+ MAC0 = 0, /* Ethernet hardware address. */
+ MAC4 = 4,
+ MAR0 = 8, /* Multicast filter. */
+ CounterAddrLow = 0x10,
+ CounterAddrHigh = 0x14,
+ TxDescStartAddrLow = 0x20,
+ TxDescStartAddrHigh = 0x24,
+ TxHDescStartAddrLow = 0x28,
+ TxHDescStartAddrHigh = 0x2c,
+ FLASH = 0x30,
+ ERSR = 0x36,
+ ChipCmd = 0x37,
+ TxPoll = 0x38,
+ IntrMask = 0x3c,
+ IntrStatus = 0x3e,
+ TxConfig = 0x40,
+ RxConfig = 0x44,
+ RxMissed = 0x4c,
+ Cfg9346 = 0x50,
+ Config0 = 0x51,
+ Config1 = 0x52,
+ Config2 = 0x53,
+ Config3 = 0x54,
+ Config4 = 0x55,
+ Config5 = 0x56,
+ MultiIntr = 0x5c,
+ PHYAR = 0x60,
+ PHYstatus = 0x6c,
+ RxMaxSize = 0xda,
+ CPlusCmd = 0xe0,
+ IntrMitigate = 0xe2,
+ RxDescAddrLow = 0xe4,
+ RxDescAddrHigh = 0xe8,
+ EarlyTxThres = 0xec,
+ FuncEvent = 0xf0,
+ FuncEventMask = 0xf4,
+ FuncPresetState = 0xf8,
+ FuncForceEvent = 0xfc,
+};
+
+enum rtl8110_registers {
+ TBICSR = 0x64,
+ TBI_ANAR = 0x68,
+ TBI_LPAR = 0x6a,
+};
+
+enum rtl8168_8101_registers {
+ CSIDR = 0x64,
+ CSIAR = 0x68,
+#define CSIAR_FLAG 0x80000000
+#define CSIAR_WRITE_CMD 0x80000000
+#define CSIAR_BYTE_ENABLE 0x0f
+#define CSIAR_BYTE_ENABLE_SHIFT 12
+#define CSIAR_ADDR_MASK 0x0fff
+
+ EPHYAR = 0x80,
+#define EPHYAR_FLAG 0x80000000
+#define EPHYAR_WRITE_CMD 0x80000000
+#define EPHYAR_REG_MASK 0x1f
+#define EPHYAR_REG_SHIFT 16
+#define EPHYAR_DATA_MASK 0xffff
+ DBG_REG = 0xd1,
+#define FIX_NAK_1 (1 << 4)
+#define FIX_NAK_2 (1 << 3)
+ EFUSEAR = 0xdc,
+#define EFUSEAR_FLAG 0x80000000
+#define EFUSEAR_WRITE_CMD 0x80000000
+#define EFUSEAR_READ_CMD 0x00000000
+#define EFUSEAR_REG_MASK 0x03ff
+#define EFUSEAR_REG_SHIFT 8
+#define EFUSEAR_DATA_MASK 0xff
+};
+
+enum rtl_register_content {
+ /* InterruptStatusBits */
+ SYSErr = 0x8000,
+ PCSTimeout = 0x4000,
+ SWInt = 0x0100,
+ TxDescUnavail = 0x0080,
+ RxFIFOOver = 0x0040,
+ LinkChg = 0x0020,
+ RxOverflow = 0x0010,
+ TxErr = 0x0008,
+ TxOK = 0x0004,
+ RxErr = 0x0002,
+ RxOK = 0x0001,
+
+ /* RxStatusDesc */
+ RxFOVF = (1 << 23),
+ RxRWT = (1 << 22),
+ RxRES = (1 << 21),
+ RxRUNT = (1 << 20),
+ RxCRC = (1 << 19),
+
+ /* ChipCmdBits */
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08,
+ CmdTxEnb = 0x04,
+ RxBufEmpty = 0x01,
+
+ /* TXPoll register p.5 */
+ HPQ = 0x80, /* Poll cmd on the high prio queue */
+ NPQ = 0x40, /* Poll cmd on the low prio queue */
+ FSWInt = 0x01, /* Forced software interrupt */
+
+ /* Cfg9346Bits */
+ Cfg9346_Lock = 0x00,
+ Cfg9346_Unlock = 0xc0,
+
+ /* rx_mode_bits */
+ AcceptErr = 0x20,
+ AcceptRunt = 0x10,
+ AcceptBroadcast = 0x08,
+ AcceptMulticast = 0x04,
+ AcceptMyPhys = 0x02,
+ AcceptAllPhys = 0x01,
+
+ /* RxConfigBits */
+ RxCfgFIFOShift = 13,
+ RxCfgDMAShift = 8,
+
+ /* TxConfigBits */
+ TxInterFrameGapShift = 24,
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ /* Config1 register p.24 */
+ LEDS1 = (1 << 7),
+ LEDS0 = (1 << 6),
+ MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */
+ Speed_down = (1 << 4),
+ MEMMAP = (1 << 3),
+ IOMAP = (1 << 2),
+ VPD = (1 << 1),
+ PMEnable = (1 << 0), /* Power Management Enable */
+
+ /* Config2 register p. 25 */
+ PCI_Clock_66MHz = 0x01,
+ PCI_Clock_33MHz = 0x00,
+
+ /* Config3 register p.25 */
+ MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
+ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
+ Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */
+
+ /* Config5 register p.27 */
+ BWF = (1 << 6), /* Accept Broadcast wakeup frame */
+ MWF = (1 << 5), /* Accept Multicast wakeup frame */
+ UWF = (1 << 4), /* Accept Unicast wakeup frame */
+ LanWake = (1 << 1), /* LanWake enable/disable */
+ PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
+
+ /* TBICSR p.28 */
+ TBIReset = 0x80000000,
+ TBILoopback = 0x40000000,
+ TBINwEnable = 0x20000000,
+ TBINwRestart = 0x10000000,
+ TBILinkOk = 0x02000000,
+ TBINwComplete = 0x01000000,
+
+ /* CPlusCmd p.31 */
+ EnableBist = (1 << 15), // 8168 8101
+ Mac_dbgo_oe = (1 << 14), // 8168 8101
+ Normal_mode = (1 << 13), // unused
+ Force_half_dup = (1 << 12), // 8168 8101
+ Force_rxflow_en = (1 << 11), // 8168 8101
+ Force_txflow_en = (1 << 10), // 8168 8101
+ Cxpl_dbg_sel = (1 << 9), // 8168 8101
+ ASF = (1 << 8), // 8168 8101
+ PktCntrDisable = (1 << 7), // 8168 8101
+ Mac_dbgo_sel = 0x001c, // 8168
+ RxVlan = (1 << 6),
+ RxChkSum = (1 << 5),
+ PCIDAC = (1 << 4),
+ PCIMulRW = (1 << 3),
+ INTT_0 = 0x0000, // 8168
+ INTT_1 = 0x0001, // 8168
+ INTT_2 = 0x0002, // 8168
+ INTT_3 = 0x0003, // 8168
+
+ /* rtl8169_PHYstatus */
+ TBI_Enable = 0x80,
+ TxFlowCtrl = 0x40,
+ RxFlowCtrl = 0x20,
+ _1000bpsF = 0x10,
+ _100bps = 0x08,
+ _10bps = 0x04,
+ LinkStatus = 0x02,
+ FullDup = 0x01,
+
+ /* _TBICSRBit */
+ TBILinkOK = 0x02000000,
+
+ /* DumpCounterCommand */
+ CounterDump = 0x8,
+};
+
+enum desc_status_bit {
+ DescOwn = (1 << 31), /* Descriptor is owned by NIC */
+ RingEnd = (1 << 30), /* End of descriptor ring */
+ FirstFrag = (1 << 29), /* First segment of a packet */
+ LastFrag = (1 << 28), /* Final segment of a packet */
+
+ /* Tx private */
+ LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
+ MSSShift = 16, /* MSS value position */
+ MSSMask = 0xfff, /* MSS value + LargeSend bit: 12 bits */
+ IPCS = (1 << 18), /* Calculate IP checksum */
+ UDPCS = (1 << 17), /* Calculate UDP/IP checksum */
+ TCPCS = (1 << 16), /* Calculate TCP/IP checksum */
+ TxVlanTag = (1 << 17), /* Add VLAN tag */
+
+ /* Rx private */
+ PID1 = (1 << 18), /* Protocol ID bit 1/2 */
+ PID0 = (1 << 17), /* Protocol ID bit 2/2 */
+
+#define RxProtoUDP (PID1)
+#define RxProtoTCP (PID0)
+#define RxProtoIP (PID1 | PID0)
+#define RxProtoMask RxProtoIP
+
+ IPFail = (1 << 16), /* IP checksum failed */
+ UDPFail = (1 << 15), /* UDP/IP checksum failed */
+ TCPFail = (1 << 14), /* TCP/IP checksum failed */
+ RxVlanTag = (1 << 16), /* VLAN tag available */
+};
+
+#define RsvdMask 0x3fffc000
+
+struct TxDesc {
+ __le32 opts1;
+ __le32 opts2;
+ __le64 addr;
+};
+
+struct RxDesc {
+ __le32 opts1;
+ __le32 opts2;
+ __le64 addr;
+};
+
+struct ring_info {
+ struct sk_buff *skb;
+ u32 len;
+ u8 __pad[sizeof(void *) - sizeof(u32)];
+};
+
+enum features {
+ RTL_FEATURE_WOL = (1 << 0),
+ RTL_FEATURE_MSI = (1 << 1),
+ RTL_FEATURE_GMII = (1 << 2),
+};
+
+struct rtl8169_counters {
+ __le64 tx_packets;
+ __le64 rx_packets;
+ __le64 tx_errors;
+ __le32 rx_errors;
+ __le16 rx_missed;
+ __le16 align_errors;
+ __le32 tx_one_collision;
+ __le32 tx_multi_collision;
+ __le64 rx_unicast;
+ __le64 rx_broadcast;
+ __le32 rx_multicast;
+ __le16 tx_aborted;
+ __le16 tx_underun;
+};
+
+struct rtl8169_private {
+ void __iomem *mmio_addr; /* memory map physical address */
+ struct pci_dev *pci_dev; /* Index of PCI device */
+ struct net_device *dev;
+ struct napi_struct napi;
+ spinlock_t lock; /* spin lock flag */
+ u32 msg_enable;
+ int chipset;
+ int mac_version;
+ u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
+ u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
+ u32 dirty_rx;
+ u32 dirty_tx;
+ struct TxDesc *TxDescArray; /* 256-aligned Tx descriptor ring */
+ struct RxDesc *RxDescArray; /* 256-aligned Rx descriptor ring */
+ dma_addr_t TxPhyAddr;
+ dma_addr_t RxPhyAddr;
+ struct sk_buff *Rx_skbuff[NUM_RX_DESC]; /* Rx data buffers */
+ struct ring_info tx_skb[NUM_TX_DESC]; /* Tx data buffers */
+ unsigned align;
+ unsigned rx_buf_sz;
+ struct timer_list timer;
+ u16 cp_cmd;
+ u16 intr_event;
+ u16 napi_event;
+ u16 intr_mask;
+ int phy_1000_ctrl_reg;
+#ifdef CONFIG_R8169_VLAN
+ struct vlan_group *vlgrp;
+#endif
+ int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
+ int (*get_settings)(struct net_device *, struct ethtool_cmd *);
+ void (*phy_reset_enable)(void __iomem *);
+ void (*hw_start)(struct net_device *);
+ unsigned int (*phy_reset_pending)(void __iomem *);
+ unsigned int (*link_ok)(void __iomem *);
+ int (*do_ioctl)(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd);
+ int pcie_cap;
+ struct delayed_work task;
+ unsigned features;
+
+ struct mii_if_info mii;
+ struct rtl8169_counters counters;
+};
+
+MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
+MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param(use_dac, int, 0);
+MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(RTL8169_VERSION);
+
+static int rtl8169_open(struct net_device *dev);
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance);
+static int rtl8169_init_ring(struct net_device *dev);
+static void rtl_hw_start(struct net_device *dev);
+static int rtl8169_close(struct net_device *dev);
+static void rtl_set_rx_mode(struct net_device *dev);
+static void rtl8169_tx_timeout(struct net_device *dev);
+static struct net_device_stats *rtl8169_get_stats(struct net_device *dev);
+static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
+ void __iomem *, u32 budget);
+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
+static void rtl8169_down(struct net_device *dev);
+static void rtl8169_rx_clear(struct rtl8169_private *tp);
+static int rtl8169_poll(struct napi_struct *napi, int budget);
+
+static const unsigned int rtl8169_rx_config =
+ (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
+
+static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+ int i;
+
+ RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff));
+
+ for (i = 20; i > 0; i--) {
+ /*
+ * Check if the RTL8169 has completed writing to the specified
+ * MII register.
+ */
+ if (!(RTL_R32(PHYAR) & 0x80000000))
+ break;
+ udelay(25);
+ }
+}
+
+static int mdio_read(void __iomem *ioaddr, int reg_addr)
+{
+ int i, value = -1;
+
+ RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16);
+
+ for (i = 20; i > 0; i--) {
+ /*
+ * Check if the RTL8169 has completed retrieving data from
+ * the specified MII register.
+ */
+ if (RTL_R32(PHYAR) & 0x80000000) {
+ value = RTL_R32(PHYAR) & 0xffff;
+ break;
+ }
+ udelay(25);
+ }
+ return value;
+}
+
+static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value)
+{
+ mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value);
+}
+
+static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m)
+{
+ int val;
+
+ val = mdio_read(ioaddr, reg_addr);
+ mdio_write(ioaddr, reg_addr, (val | p) & ~m);
+}
+
+static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
+ int val)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ mdio_write(ioaddr, location, val);
+}
+
+static int rtl_mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ return mdio_read(ioaddr, location);
+}
+
+static void rtl_ephy_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+ unsigned int i;
+
+ RTL_W32(EPHYAR, EPHYAR_WRITE_CMD | (value & EPHYAR_DATA_MASK) |
+ (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (!(RTL_R32(EPHYAR) & EPHYAR_FLAG))
+ break;
+ udelay(10);
+ }
+}
+
+static u16 rtl_ephy_read(void __iomem *ioaddr, int reg_addr)
+{
+ u16 value = 0xffff;
+ unsigned int i;
+
+ RTL_W32(EPHYAR, (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (RTL_R32(EPHYAR) & EPHYAR_FLAG) {
+ value = RTL_R32(EPHYAR) & EPHYAR_DATA_MASK;
+ break;
+ }
+ udelay(10);
+ }
+
+ return value;
+}
+
+static void rtl_csi_write(void __iomem *ioaddr, int addr, int value)
+{
+ unsigned int i;
+
+ RTL_W32(CSIDR, value);
+ RTL_W32(CSIAR, CSIAR_WRITE_CMD | (addr & CSIAR_ADDR_MASK) |
+ CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (!(RTL_R32(CSIAR) & CSIAR_FLAG))
+ break;
+ udelay(10);
+ }
+}
+
+static u32 rtl_csi_read(void __iomem *ioaddr, int addr)
+{
+ u32 value = ~0x00;
+ unsigned int i;
+
+ RTL_W32(CSIAR, (addr & CSIAR_ADDR_MASK) |
+ CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
+
+ for (i = 0; i < 100; i++) {
+ if (RTL_R32(CSIAR) & CSIAR_FLAG) {
+ value = RTL_R32(CSIDR);
+ break;
+ }
+ udelay(10);
+ }
+
+ return value;
+}
+
+static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
+{
+ u8 value = 0xff;
+ unsigned int i;
+
+ RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT);
+
+ for (i = 0; i < 300; i++) {
+ if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) {
+ value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK;
+ break;
+ }
+ udelay(100);
+ }
+
+ return value;
+}
+
+static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
+{
+ RTL_W16(IntrMask, 0x0000);
+
+ RTL_W16(IntrStatus, 0xffff);
+}
+
+static void rtl8169_asic_down(void __iomem *ioaddr)
+{
+ RTL_W8(ChipCmd, 0x00);
+ rtl8169_irq_mask_and_ack(ioaddr);
+ RTL_R16(CPlusCmd);
+}
+
+static unsigned int rtl8169_tbi_reset_pending(void __iomem *ioaddr)
+{
+ return RTL_R32(TBICSR) & TBIReset;
+}
+
+static unsigned int rtl8169_xmii_reset_pending(void __iomem *ioaddr)
+{
+ return mdio_read(ioaddr, MII_BMCR) & BMCR_RESET;
+}
+
+static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr)
+{
+ return RTL_R32(TBICSR) & TBILinkOk;
+}
+
+static unsigned int rtl8169_xmii_link_ok(void __iomem *ioaddr)
+{
+ return RTL_R8(PHYstatus) & LinkStatus;
+}
+
+static void rtl8169_tbi_reset_enable(void __iomem *ioaddr)
+{
+ RTL_W32(TBICSR, RTL_R32(TBICSR) | TBIReset);
+}
+
+static void rtl8169_xmii_reset_enable(void __iomem *ioaddr)
+{
+ unsigned int val;
+
+ val = mdio_read(ioaddr, MII_BMCR) | BMCR_RESET;
+ mdio_write(ioaddr, MII_BMCR, val & 0xffff);
+}
+
+static void rtl8169_check_link_status(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ if (tp->link_ok(ioaddr)) {
+ netif_carrier_on(dev);
+ if (netif_msg_ifup(tp))
+ printk(KERN_INFO PFX "%s: link up\n", dev->name);
+ } else {
+ if (netif_msg_ifdown(tp))
+ printk(KERN_INFO PFX "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 options;
+
+ wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+ wol->supported = WAKE_ANY;
+
+ spin_lock_irq(&tp->lock);
+
+ options = RTL_R8(Config1);
+ if (!(options & PMEnable))
+ goto out_unlock;
+
+ options = RTL_R8(Config3);
+ if (options & LinkUp)
+ wol->wolopts |= WAKE_PHY;
+ if (options & MagicPacket)
+ wol->wolopts |= WAKE_MAGIC;
+
+ options = RTL_R8(Config5);
+ if (options & UWF)
+ wol->wolopts |= WAKE_UCAST;
+ if (options & BWF)
+ wol->wolopts |= WAKE_BCAST;
+ if (options & MWF)
+ wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+ static const struct {
+ u32 opt;
+ u16 reg;
+ u8 mask;
+ } cfg[] = {
+ { WAKE_ANY, Config1, PMEnable },
+ { WAKE_PHY, Config3, LinkUp },
+ { WAKE_MAGIC, Config3, MagicPacket },
+ { WAKE_UCAST, Config5, UWF },
+ { WAKE_BCAST, Config5, BWF },
+ { WAKE_MCAST, Config5, MWF },
+ { WAKE_ANY, Config5, LanWake }
+ };
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+ u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+ if (wol->wolopts & cfg[i].opt)
+ options |= cfg[i].mask;
+ RTL_W8(cfg[i].reg, options);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ if (wol->wolopts)
+ tp->features |= RTL_FEATURE_WOL;
+ else
+ tp->features &= ~RTL_FEATURE_WOL;
+ device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
+static void rtl8169_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ strcpy(info->driver, MODULENAME);
+ strcpy(info->version, RTL8169_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int rtl8169_get_regs_len(struct net_device *dev)
+{
+ return R8169_REGS_SIZE;
+}
+
+static int rtl8169_set_speed_tbi(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int ret = 0;
+ u32 reg;
+
+ reg = RTL_R32(TBICSR);
+ if ((autoneg == AUTONEG_DISABLE) && (speed == SPEED_1000) &&
+ (duplex == DUPLEX_FULL)) {
+ RTL_W32(TBICSR, reg & ~(TBINwEnable | TBINwRestart));
+ } else if (autoneg == AUTONEG_ENABLE)
+ RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
+ else {
+ if (netif_msg_link(tp)) {
+ printk(KERN_WARNING "%s: "
+ "incorrect speed setting refused in TBI mode\n",
+ dev->name);
+ }
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static int rtl8169_set_speed_xmii(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int giga_ctrl, bmcr;
+
+ if (autoneg == AUTONEG_ENABLE) {
+ int auto_nego;
+
+ auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
+ auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL);
+ auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+
+ giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
+ giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+
+ /* The 8100e/8101e/8102e do Fast Ethernet only. */
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_16)) {
+ giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+ } else if (netif_msg_link(tp)) {
+ printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
+ dev->name);
+ }
+
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
+ (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
+ /*
+ * Wake up the PHY.
+ * Vendor specific (0x1f) and reserved (0x0e) MII
+ * registers.
+ */
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_write(ioaddr, 0x0e, 0x0000);
+ }
+
+ mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
+ mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
+ } else {
+ giga_ctrl = 0;
+
+ if (speed == SPEED_10)
+ bmcr = 0;
+ else if (speed == SPEED_100)
+ bmcr = BMCR_SPEED100;
+ else
+ return -EINVAL;
+
+ if (duplex == DUPLEX_FULL)
+ bmcr |= BMCR_FULLDPLX;
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ }
+
+ tp->phy_1000_ctrl_reg = giga_ctrl;
+
+ mdio_write(ioaddr, MII_BMCR, bmcr);
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
+ mdio_write(ioaddr, 0x17, 0x2138);
+ mdio_write(ioaddr, 0x0e, 0x0260);
+ } else {
+ mdio_write(ioaddr, 0x17, 0x2108);
+ mdio_write(ioaddr, 0x0e, 0x0000);
+ }
+ }
+
+ return 0;
+}
+
+static int rtl8169_set_speed(struct net_device *dev,
+ u8 autoneg, u16 speed, u8 duplex)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int ret;
+
+ ret = tp->set_speed(dev, autoneg, speed, duplex);
+
+ if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+ mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
+
+ return ret;
+}
+
+static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ ret = rtl8169_set_speed(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return ret;
+}
+
+static u32 rtl8169_get_rx_csum(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return tp->cp_cmd & RxChkSum;
+}
+
+static int rtl8169_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ if (data)
+ tp->cp_cmd |= RxChkSum;
+ else
+ tp->cp_cmd &= ~RxChkSum;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ RTL_R16(CPlusCmd);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+
+ return 0;
+}
+
+#ifdef CONFIG_R8169_VLAN
+
+static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
+ struct sk_buff *skb)
+{
+ return (tp->vlgrp && vlan_tx_tag_present(skb)) ?
+ TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
+}
+
+static void rtl8169_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ tp->vlgrp = grp;
+ /*
+ * Do not disable RxVlan on 8110SCd.
+ */
+ if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05))
+ tp->cp_cmd |= RxVlan;
+ else
+ tp->cp_cmd &= ~RxVlan;
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ RTL_R16(CPlusCmd);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
+ struct sk_buff *skb)
+{
+ u32 opts2 = le32_to_cpu(desc->opts2);
+ struct vlan_group *vlgrp = tp->vlgrp;
+ int ret;
+
+ if (vlgrp && (opts2 & RxVlanTag)) {
+ vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+ ret = 0;
+ } else
+ ret = -1;
+ desc->opts2 = 0;
+ return ret;
+}
+
+#else /* !CONFIG_R8169_VLAN */
+
+static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
+ struct sk_buff *skb)
+{
+ return 0;
+}
+
+static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
+ struct sk_buff *skb)
+{
+ return -1;
+}
+
+#endif
+
+static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 status;
+
+ cmd->supported =
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE;
+ cmd->port = PORT_FIBRE;
+ cmd->transceiver = XCVR_INTERNAL;
+
+ status = RTL_R32(TBICSR);
+ cmd->advertising = (status & TBINwEnable) ? ADVERTISED_Autoneg : 0;
+ cmd->autoneg = !!(status & TBINwEnable);
+
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL; /* Always set */
+
+ return 0;
+}
+
+static int rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_gset(&tp->mii, cmd);
+}
+
+static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ rc = tp->get_settings(dev, cmd);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+ return rc;
+}
+
+static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (regs->len > R8169_REGS_SIZE)
+ regs->len = R8169_REGS_SIZE;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ memcpy_fromio(p, tp->mmio_addr, regs->len);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static u32 rtl8169_get_msglevel(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void rtl8169_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
+static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = {
+ "tx_packets",
+ "rx_packets",
+ "tx_errors",
+ "rx_errors",
+ "rx_missed",
+ "align_errors",
+ "tx_single_collisions",
+ "tx_multi_collisions",
+ "unicast",
+ "broadcast",
+ "multicast",
+ "tx_aborted",
+ "tx_underrun",
+};
+
+static int rtl8169_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(rtl8169_gstrings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void rtl8169_update_counters(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct rtl8169_counters *counters;
+ dma_addr_t paddr;
+ u32 cmd;
+ int wait = 1000;
+
+ /*
+ * Some chips are unable to dump tally counters when the receiver
+ * is disabled.
+ */
+ if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
+ return;
+
+ counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+ if (!counters)
+ return;
+
+ RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
+ cmd = (u64)paddr & DMA_BIT_MASK(32);
+ RTL_W32(CounterAddrLow, cmd);
+ RTL_W32(CounterAddrLow, cmd | CounterDump);
+
+ while (wait--) {
+ if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
+ /* copy updated counters */
+ memcpy(&tp->counters, counters, sizeof(*counters));
+ break;
+ }
+ udelay(10);
+ }
+
+ RTL_W32(CounterAddrLow, 0);
+ RTL_W32(CounterAddrHigh, 0);
+
+ pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+}
+
+static void rtl8169_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ ASSERT_RTNL();
+
+ rtl8169_update_counters(dev);
+
+ data[0] = le64_to_cpu(tp->counters.tx_packets);
+ data[1] = le64_to_cpu(tp->counters.rx_packets);
+ data[2] = le64_to_cpu(tp->counters.tx_errors);
+ data[3] = le32_to_cpu(tp->counters.rx_errors);
+ data[4] = le16_to_cpu(tp->counters.rx_missed);
+ data[5] = le16_to_cpu(tp->counters.align_errors);
+ data[6] = le32_to_cpu(tp->counters.tx_one_collision);
+ data[7] = le32_to_cpu(tp->counters.tx_multi_collision);
+ data[8] = le64_to_cpu(tp->counters.rx_unicast);
+ data[9] = le64_to_cpu(tp->counters.rx_broadcast);
+ data[10] = le32_to_cpu(tp->counters.rx_multicast);
+ data[11] = le16_to_cpu(tp->counters.tx_aborted);
+ data[12] = le16_to_cpu(tp->counters.tx_underun);
+}
+
+static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ switch(stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings));
+ break;
+ }
+}
+
+static const struct ethtool_ops rtl8169_ethtool_ops = {
+ .get_drvinfo = rtl8169_get_drvinfo,
+ .get_regs_len = rtl8169_get_regs_len,
+ .get_link = ethtool_op_get_link,
+ .get_settings = rtl8169_get_settings,
+ .set_settings = rtl8169_set_settings,
+ .get_msglevel = rtl8169_get_msglevel,
+ .set_msglevel = rtl8169_set_msglevel,
+ .get_rx_csum = rtl8169_get_rx_csum,
+ .set_rx_csum = rtl8169_set_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .set_tso = ethtool_op_set_tso,
+ .get_regs = rtl8169_get_regs,
+ .get_wol = rtl8169_get_wol,
+ .set_wol = rtl8169_set_wol,
+ .get_strings = rtl8169_get_strings,
+ .get_sset_count = rtl8169_get_sset_count,
+ .get_ethtool_stats = rtl8169_get_ethtool_stats,
+};
+
+static void rtl8169_get_mac_version(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ /*
+ * The driver currently handles the 8168Bf and the 8168Be identically
+ * but they can be identified more specifically through the test below
+ * if needed:
+ *
+ * (RTL_R32(TxConfig) & 0x700000) == 0x500000 ? 8168Bf : 8168Be
+ *
+ * Same thing for the 8101Eb and the 8101Ec:
+ *
+ * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
+ */
+ static const struct {
+ u32 mask;
+ u32 val;
+ int mac_version;
+ } mac_info[] = {
+ /* 8168D family. */
+ { 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 },
+ { 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 },
+ { 0x7c800000, 0x28800000, RTL_GIGA_MAC_VER_27 },
+ { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
+
+ /* 8168C family. */
+ { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
+ { 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
+ { 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3c000000, RTL_GIGA_MAC_VER_19 },
+ { 0x7cf00000, 0x3c200000, RTL_GIGA_MAC_VER_20 },
+ { 0x7cf00000, 0x3c300000, RTL_GIGA_MAC_VER_21 },
+ { 0x7cf00000, 0x3c400000, RTL_GIGA_MAC_VER_22 },
+ { 0x7c800000, 0x3c000000, RTL_GIGA_MAC_VER_22 },
+
+ /* 8168B family. */
+ { 0x7cf00000, 0x38000000, RTL_GIGA_MAC_VER_12 },
+ { 0x7cf00000, 0x38500000, RTL_GIGA_MAC_VER_17 },
+ { 0x7c800000, 0x38000000, RTL_GIGA_MAC_VER_17 },
+ { 0x7c800000, 0x30000000, RTL_GIGA_MAC_VER_11 },
+
+ /* 8101 family. */
+ { 0x7cf00000, 0x34a00000, RTL_GIGA_MAC_VER_09 },
+ { 0x7cf00000, 0x24a00000, RTL_GIGA_MAC_VER_09 },
+ { 0x7cf00000, 0x34900000, RTL_GIGA_MAC_VER_08 },
+ { 0x7cf00000, 0x24900000, RTL_GIGA_MAC_VER_08 },
+ { 0x7cf00000, 0x34800000, RTL_GIGA_MAC_VER_07 },
+ { 0x7cf00000, 0x24800000, RTL_GIGA_MAC_VER_07 },
+ { 0x7cf00000, 0x34000000, RTL_GIGA_MAC_VER_13 },
+ { 0x7cf00000, 0x34300000, RTL_GIGA_MAC_VER_10 },
+ { 0x7cf00000, 0x34200000, RTL_GIGA_MAC_VER_16 },
+ { 0x7c800000, 0x34800000, RTL_GIGA_MAC_VER_09 },
+ { 0x7c800000, 0x24800000, RTL_GIGA_MAC_VER_09 },
+ { 0x7c800000, 0x34000000, RTL_GIGA_MAC_VER_16 },
+ /* FIXME: where did these entries come from ? -- FR */
+ { 0xfc800000, 0x38800000, RTL_GIGA_MAC_VER_15 },
+ { 0xfc800000, 0x30800000, RTL_GIGA_MAC_VER_14 },
+
+ /* 8110 family. */
+ { 0xfc800000, 0x98000000, RTL_GIGA_MAC_VER_06 },
+ { 0xfc800000, 0x18000000, RTL_GIGA_MAC_VER_05 },
+ { 0xfc800000, 0x10000000, RTL_GIGA_MAC_VER_04 },
+ { 0xfc800000, 0x04000000, RTL_GIGA_MAC_VER_03 },
+ { 0xfc800000, 0x00800000, RTL_GIGA_MAC_VER_02 },
+ { 0xfc800000, 0x00000000, RTL_GIGA_MAC_VER_01 },
+
+ /* Catch-all */
+ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE }
+ }, *p = mac_info;
+ u32 reg;
+
+ reg = RTL_R32(TxConfig);
+ while ((reg & p->mask) != p->val)
+ p++;
+ tp->mac_version = p->mac_version;
+}
+
+static void rtl8169_print_mac_version(struct rtl8169_private *tp)
+{
+ dprintk("mac_version = 0x%02x\n", tp->mac_version);
+}
+
+struct phy_reg {
+ u16 reg;
+ u16 val;
+};
+
+static void rtl_phy_write(void __iomem *ioaddr, const struct phy_reg *regs, int len)
+{
+ while (len-- > 0) {
+ mdio_write(ioaddr, regs->reg, regs->val);
+ regs++;
+ }
+}
+
+static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x006e },
+ { 0x08, 0x0708 },
+ { 0x15, 0x4000 },
+ { 0x18, 0x65c7 },
+
+ { 0x1f, 0x0001 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x0000 },
+
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf60 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x0077 },
+ { 0x04, 0x7800 },
+ { 0x04, 0x7000 },
+
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf0f9 },
+ { 0x04, 0x9800 },
+ { 0x04, 0x9000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xa000 },
+
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x00bb },
+ { 0x04, 0xb800 },
+ { 0x04, 0xb000 },
+
+ { 0x03, 0xdf41 },
+ { 0x02, 0xdc60 },
+ { 0x01, 0x6340 },
+ { 0x00, 0x007d },
+ { 0x04, 0xd800 },
+ { 0x04, 0xd000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x100a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0b, 0x0000 },
+ { 0x00, 0x9200 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x01, 0x90d0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 vendor_id, device_id;
+
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &vendor_id);
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &device_id);
+
+ if ((vendor_id != PCI_VENDOR_ID_GIGABYTE) || (device_id != 0xe000))
+ return;
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x10, 0xf01b);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x10, 0xf41b },
+ { 0x14, 0xfb54 },
+ { 0x18, 0xf5c7 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ rtl8169scd_hw_phy_config_quirk(tp, ioaddr);
+}
+
+static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0x8480 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x18, 0x67c7 },
+ { 0x04, 0x2000 },
+ { 0x03, 0x002f },
+ { 0x02, 0x4360 },
+ { 0x01, 0x0109 },
+ { 0x00, 0x3022 },
+ { 0x04, 0x2800 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168bb_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x10, 0xf41b },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168bef_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x10, 0xf41b },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168cp_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0000 },
+ { 0x1d, 0x0f00 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x1ec8 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168cp_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8168c_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x1f, 0x0002 },
+ { 0x00, 0x88d4 },
+ { 0x01, 0x82b1 },
+ { 0x03, 0x7002 },
+ { 0x08, 0x9e30 },
+ { 0x09, 0x01f0 },
+ { 0x0a, 0x5500 },
+ { 0x0c, 0x00c8 },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xc096 },
+ { 0x16, 0x000a },
+ { 0x1f, 0x0000 },
+ { 0x1f, 0x0000 },
+ { 0x09, 0x2000 },
+ { 0x09, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0x9000 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x7eb8 },
+ { 0x06, 0x0761 },
+ { 0x1f, 0x0003 },
+ { 0x16, 0x0f0a },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_3_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x12, 0x2300 },
+ { 0x1d, 0x3d98 },
+ { 0x1f, 0x0002 },
+ { 0x0c, 0x7eb8 },
+ { 0x06, 0x5461 },
+ { 0x1f, 0x0003 },
+ { 0x16, 0x0f0a },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ mdio_patch(ioaddr, 0x16, 1 << 0);
+ mdio_patch(ioaddr, 0x14, 1 << 5);
+ mdio_patch(ioaddr, 0x0d, 1 << 5);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr)
+{
+ rtl8168c_3_hw_phy_config(ioaddr);
+}
+
+static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init_0[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 }
+ };
+ static const struct phy_reg phy_reg_init_1[] = {
+ { 0x1f, 0x0002 },
+ { 0x06, 0x5561 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static const struct phy_reg phy_reg_init_2[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaef },
+ { 0x06, 0x59ee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d59 },
+ { 0x06, 0x0fef },
+ { 0x06, 0x0139 },
+ { 0x06, 0x029e },
+ { 0x06, 0x06ef },
+ { 0x06, 0x1039 },
+ { 0x06, 0x089f },
+ { 0x06, 0x2aee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x01e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d58 },
+ { 0x06, 0x409e },
+ { 0x06, 0x0f39 },
+ { 0x06, 0x46aa },
+ { 0x06, 0x0bbf },
+ { 0x06, 0x8290 },
+ { 0x06, 0xd682 },
+ { 0x06, 0x9802 },
+ { 0x06, 0x014f },
+ { 0x06, 0xae09 },
+ { 0x06, 0xbf82 },
+ { 0x06, 0x98d6 },
+ { 0x06, 0x82a0 },
+ { 0x06, 0x0201 },
+ { 0x06, 0x4fef },
+ { 0x06, 0x95fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xea00 },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xeb00 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7ce3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0xa511 },
+ { 0x06, 0x1112 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd644 },
+ { 0x06, 0x4402 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xae0f },
+ { 0x06, 0xa544 },
+ { 0x06, 0x4402 },
+ { 0x06, 0xae4d },
+ { 0x06, 0xa5aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0xae47 },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834d },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834c },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8351 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834a },
+ { 0x06, 0xffee },
+ { 0x06, 0x834b },
+ { 0x06, 0xffe0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3158 },
+ { 0x06, 0xfee4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13e0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x009f },
+ { 0x06, 0x0ae0 },
+ { 0x06, 0x834f },
+ { 0x06, 0xa010 },
+ { 0x06, 0xa5ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x01e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7805 },
+ { 0x06, 0x9e9a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x10e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x019e },
+ { 0x06, 0x05ae },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81f8 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa3af },
+ { 0x06, 0x81dc },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x8348 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8349 },
+ { 0x06, 0x00e0 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x5801 },
+ { 0x06, 0x9fea },
+ { 0x06, 0xd000 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0xeae3 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x5af8 },
+ { 0x06, 0x1e20 },
+ { 0x06, 0xe6f8 },
+ { 0x06, 0xeae5 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0xd302 },
+ { 0x06, 0xb3fe },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7cef },
+ { 0x06, 0x325b },
+ { 0x06, 0x80e3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0x9e03 },
+ { 0x06, 0x7dff },
+ { 0x06, 0xff0d },
+ { 0x06, 0x581c },
+ { 0x06, 0x551a },
+ { 0x06, 0x6511 },
+ { 0x06, 0xa190 },
+ { 0x06, 0xd3e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x491b },
+ { 0x06, 0x56ab },
+ { 0x06, 0x08ef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4910 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xa004 },
+ { 0x06, 0xb9e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x49ef },
+ { 0x06, 0x65e2 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe383 },
+ { 0x06, 0x4b1b },
+ { 0x06, 0x56aa },
+ { 0x06, 0x0eef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4be2 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ce0 },
+ { 0x06, 0x834d },
+ { 0x06, 0xa000 },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81dc },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4d10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4dae },
+ { 0x06, 0x0480 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4de0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x02e0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x6801 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xae37 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e03 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4ce1 },
+ { 0x06, 0x834d },
+ { 0x06, 0x1b01 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xaaa1 },
+ { 0x06, 0xaea8 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xaeab },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f78 },
+ { 0x06, 0x039f },
+ { 0x06, 0x14ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x05d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x5554 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xba00 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x6802 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x580f },
+ { 0x06, 0x1e02 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xd000 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x5bbf },
+ { 0x06, 0x8350 },
+ { 0x06, 0xef46 },
+ { 0x06, 0xdc19 },
+ { 0x06, 0xddd0 },
+ { 0x06, 0x0102 },
+ { 0x06, 0x825b },
+ { 0x06, 0x0282 },
+ { 0x06, 0x77e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6158 },
+ { 0x06, 0xfde4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61fc },
+ { 0x06, 0x04f9 },
+ { 0x06, 0xfafb },
+ { 0x06, 0xc6bf },
+ { 0x06, 0xf840 },
+ { 0x06, 0xbe83 },
+ { 0x06, 0x50a0 },
+ { 0x06, 0x0101 },
+ { 0x06, 0x071b },
+ { 0x06, 0x89cf },
+ { 0x06, 0xd208 },
+ { 0x06, 0xebdb },
+ { 0x06, 0x19b2 },
+ { 0x06, 0xfbff },
+ { 0x06, 0xfefd },
+ { 0x06, 0x04f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x6808 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x58f7 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0x4d20 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4e22 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4ddf },
+ { 0x06, 0xff01 },
+ { 0x06, 0x4edd },
+ { 0x06, 0xff01 },
+ { 0x05, 0x83d4 },
+ { 0x06, 0x8000 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8051 },
+ { 0x02, 0x6010 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef);
+ mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+
+ if ((val & 0x00ff) != 0x006c) {
+ static const u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x6662 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x6662 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+ }
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0d, 0x0300);
+ mdio_patch(ioaddr, 0x0f, 0x0010);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2));
+}
+
+static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init_0[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 },
+
+ { 0x1f, 0x0002 },
+ { 0x06, 0x5561 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static const struct phy_reg phy_reg_init_1[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7da5 },
+ { 0x06, 0x1111 },
+ { 0x06, 0x12d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6ae },
+ { 0x06, 0x0fa5 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x02ae },
+ { 0x06, 0x4da5 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x02ae },
+ { 0x06, 0x47af },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4d0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4c0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x5100 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4aff },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4bff },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x58fe },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8daf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7800 },
+ { 0x06, 0x9f0a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4fa0 },
+ { 0x06, 0x10a5 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e01 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x059e },
+ { 0x06, 0x9ae0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e10 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7801 },
+ { 0x06, 0x9e05 },
+ { 0x06, 0xae0c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa7af },
+ { 0x06, 0x8152 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8baf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4800 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4900 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x5110 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x5158 },
+ { 0x06, 0x019f },
+ { 0x06, 0xead0 },
+ { 0x06, 0x00d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66e2 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0xeb5a },
+ { 0x06, 0xf81e },
+ { 0x06, 0x20e6 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0xebd3 },
+ { 0x06, 0x02b3 },
+ { 0x06, 0xfee2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xef32 },
+ { 0x06, 0x5b80 },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7d9e },
+ { 0x06, 0x037d },
+ { 0x06, 0xffff },
+ { 0x06, 0x0d58 },
+ { 0x06, 0x1c55 },
+ { 0x06, 0x1a65 },
+ { 0x06, 0x11a1 },
+ { 0x06, 0x90d3 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xab08 },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x48e7 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x10d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66a0 },
+ { 0x06, 0x04b9 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0xef65 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4ae3 },
+ { 0x06, 0x834b },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xaa0e },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ae7 },
+ { 0x06, 0x834b },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4de6 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4da0 },
+ { 0x06, 0x000c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x834d },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xae04 },
+ { 0x06, 0x80e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0be0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e02 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8de0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3168 },
+ { 0x06, 0x01e4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8bae },
+ { 0x06, 0x37ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x03e0 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe183 },
+ { 0x06, 0x4d1b },
+ { 0x06, 0x019e },
+ { 0x06, 0x04aa },
+ { 0x06, 0xa1ae },
+ { 0x06, 0xa8ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ae },
+ { 0x06, 0xabe0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9f14 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e05 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd655 },
+ { 0x06, 0x5402 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6ba },
+ { 0x06, 0x0002 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xfefd },
+ { 0x06, 0xfc05 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6168 },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0x0f1e },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49d0 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x820a },
+ { 0x06, 0xbf83 },
+ { 0x06, 0x50ef },
+ { 0x06, 0x46dc },
+ { 0x06, 0x19dd },
+ { 0x06, 0xd001 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x0a02 },
+ { 0x06, 0x8226 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x58fd },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xfbc6 },
+ { 0x06, 0xbff8 },
+ { 0x06, 0x40be },
+ { 0x06, 0x8350 },
+ { 0x06, 0xa001 },
+ { 0x06, 0x0107 },
+ { 0x06, 0x1b89 },
+ { 0x06, 0xcfd2 },
+ { 0x06, 0x08eb },
+ { 0x06, 0xdb19 },
+ { 0x06, 0xb2fb },
+ { 0x06, 0xfffe },
+ { 0x06, 0xfd04 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4968 },
+ { 0x06, 0x08e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0xf7e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49fc },
+ { 0x06, 0x044d },
+ { 0x06, 0x2000 },
+ { 0x06, 0x024e },
+ { 0x06, 0x2200 },
+ { 0x06, 0x024d },
+ { 0x06, 0xdfff },
+ { 0x06, 0x014e },
+ { 0x06, 0xddff },
+ { 0x06, 0x0100 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8000 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+ if ((val & 0x00ff) != 0x006c) {
+ u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x2642 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x2642 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+ }
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x17, 0x0cc0);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0f, 0x0017);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+}
+
+static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x10, 0x0008 },
+ { 0x0d, 0x006c },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0xa4d8 },
+ { 0x09, 0x281c },
+ { 0x07, 0x2883 },
+ { 0x0a, 0x6b35 },
+ { 0x1d, 0x3da4 },
+ { 0x1c, 0xeffd },
+ { 0x14, 0x7f52 },
+ { 0x18, 0x7fc6 },
+ { 0x08, 0x0601 },
+ { 0x06, 0x4063 },
+ { 0x10, 0xf074 },
+ { 0x1f, 0x0003 },
+ { 0x13, 0x0789 },
+ { 0x12, 0xf4bd },
+ { 0x1a, 0x04fd },
+ { 0x14, 0x84b0 },
+ { 0x1f, 0x0000 },
+ { 0x00, 0x9200 },
+
+ { 0x1f, 0x0005 },
+ { 0x01, 0x0340 },
+ { 0x1f, 0x0001 },
+ { 0x04, 0x4000 },
+ { 0x03, 0x1d21 },
+ { 0x02, 0x0c32 },
+ { 0x01, 0x0200 },
+ { 0x00, 0x5554 },
+ { 0x04, 0x4800 },
+ { 0x04, 0x4000 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0007 },
+ { 0x1e, 0x0023 },
+ { 0x16, 0x0000 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
+{
+ static const struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0003 },
+ { 0x08, 0x441d },
+ { 0x01, 0x9100 },
+ { 0x1f, 0x0000 }
+ };
+
+ mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_patch(ioaddr, 0x11, 1 << 12);
+ mdio_patch(ioaddr, 0x19, 1 << 13);
+ mdio_patch(ioaddr, 0x10, 1 << 15);
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
+static void rtl_hw_phy_config(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl8169_print_mac_version(tp);
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_01:
+ break;
+ case RTL_GIGA_MAC_VER_02:
+ case RTL_GIGA_MAC_VER_03:
+ rtl8169s_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_04:
+ rtl8169sb_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_05:
+ rtl8169scd_hw_phy_config(tp, ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_06:
+ rtl8169sce_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_07:
+ case RTL_GIGA_MAC_VER_08:
+ case RTL_GIGA_MAC_VER_09:
+ rtl8102e_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_11:
+ rtl8168bb_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_12:
+ rtl8168bef_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_17:
+ rtl8168bef_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_18:
+ rtl8168cp_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_19:
+ rtl8168c_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_20:
+ rtl8168c_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_21:
+ rtl8168c_3_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_22:
+ rtl8168c_4_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_23:
+ case RTL_GIGA_MAC_VER_24:
+ rtl8168cp_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_25:
+ rtl8168d_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_26:
+ rtl8168d_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_27:
+ rtl8168d_3_hw_phy_config(ioaddr);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static void rtl8169_phy_timer(unsigned long __opaque)
+{
+ struct net_device *dev = (struct net_device *)__opaque;
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long timeout = RTL8169_PHY_TIMEOUT;
+
+ assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
+
+ if (!(tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+ return;
+
+ spin_lock_irq(&tp->lock);
+
+ if (tp->phy_reset_pending(ioaddr)) {
+ /*
+ * A busy loop could burn quite a few cycles on nowadays CPU.
+ * Let's delay the execution of the timer for a few ticks.
+ */
+ timeout = HZ/10;
+ goto out_mod_timer;
+ }
+
+ if (tp->link_ok(ioaddr))
+ goto out_unlock;
+
+ if (netif_msg_link(tp))
+ printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name);
+
+ tp->phy_reset_enable(ioaddr);
+
+out_mod_timer:
+ mod_timer(timer, jiffies + timeout);
+out_unlock:
+ spin_unlock_irq(&tp->lock);
+}
+
+static inline void rtl8169_delete_timer(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
+ return;
+
+ del_timer_sync(timer);
+}
+
+static inline void rtl8169_request_timer(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
+ return;
+
+ mod_timer(timer, jiffies + RTL8169_PHY_TIMEOUT);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void rtl8169_netpoll(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ disable_irq(pdev->irq);
+ rtl8169_interrupt(pdev->irq, dev);
+ enable_irq(pdev->irq);
+}
+#endif
+
+static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
+ void __iomem *ioaddr)
+{
+ iounmap(ioaddr);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+static void rtl8169_phy_reset(struct net_device *dev,
+ struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+
+ tp->phy_reset_enable(ioaddr);
+ for (i = 0; i < 100; i++) {
+ if (!tp->phy_reset_pending(ioaddr))
+ return;
+ msleep(1);
+ }
+ if (netif_msg_link(tp))
+ printk(KERN_ERR "%s: PHY reset failed.\n", dev->name);
+}
+
+static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl_hw_phy_config(dev);
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
+ dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+ RTL_W8(0x82, 0x01);
+ }
+
+ pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
+
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
+ pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_02) {
+ dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+ RTL_W8(0x82, 0x01);
+ dprintk("Set PHY Reg 0x0bh = 0x00h\n");
+ mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0
+ }
+
+ rtl8169_phy_reset(dev, tp);
+
+ /*
+ * rtl8169_set_speed_xmii takes good care of the Fast Ethernet
+ * only 8101. Don't panic.
+ */
+ rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL);
+
+ if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
+ printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
+}
+
+static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 high;
+ u32 low;
+
+ low = addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24);
+ high = addr[4] | (addr[5] << 8);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W32(MAC0, low);
+ RTL_W32(MAC4, high);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+}
+
+static int rtl_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ rtl_rar_set(tp, dev->dev_addr);
+
+ return 0;
+}
+
+static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ return netif_running(dev) ? tp->do_ioctl(tp, data, cmd) : -ENODEV;
+}
+
+static int rtl_xmii_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = 32; /* Internal PHY */
+ return 0;
+
+ case SIOCGMIIREG:
+ data->val_out = mdio_read(tp->mmio_addr, data->reg_num & 0x1f);
+ return 0;
+
+ case SIOCSMIIREG:
+ mdio_write(tp->mmio_addr, data->reg_num & 0x1f, data->val_in);
+ return 0;
+ }
+ return -EOPNOTSUPP;
+}
+
+static int rtl_tbi_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+{
+ return -EOPNOTSUPP;
+}
+
+static const struct rtl_cfg_info {
+ void (*hw_start)(struct net_device *);
+ unsigned int region;
+ unsigned int align;
+ u16 intr_event;
+ u16 napi_event;
+ unsigned features;
+ u8 default_ver;
+} rtl_cfg_infos [] = {
+ [RTL_CFG_0] = {
+ .hw_start = rtl_hw_start_8169,
+ .region = 1,
+ .align = 0,
+ .intr_event = SYSErr | LinkChg | RxOverflow |
+ RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_GMII,
+ .default_ver = RTL_GIGA_MAC_VER_01,
+ },
+ [RTL_CFG_1] = {
+ .hw_start = rtl_hw_start_8168,
+ .region = 2,
+ .align = 8,
+ .intr_event = SYSErr | LinkChg | RxOverflow |
+ TxErr | TxOK | RxOK | RxErr,
+ .napi_event = TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI,
+ .default_ver = RTL_GIGA_MAC_VER_11,
+ },
+ [RTL_CFG_2] = {
+ .hw_start = rtl_hw_start_8101,
+ .region = 2,
+ .align = 8,
+ .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout |
+ RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ .features = RTL_FEATURE_MSI,
+ .default_ver = RTL_GIGA_MAC_VER_13,
+ }
+};
+
+/* Cfg9346_Unlock assumed. */
+static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr,
+ const struct rtl_cfg_info *cfg)
+{
+ unsigned msi = 0;
+ u8 cfg2;
+
+ cfg2 = RTL_R8(Config2) & ~MSIEnable;
+ if (cfg->features & RTL_FEATURE_MSI) {
+ if (pci_enable_msi(pdev)) {
+ dev_info(&pdev->dev, "no MSI. Back to INTx.\n");
+ } else {
+ cfg2 |= MSIEnable;
+ msi = RTL_FEATURE_MSI;
+ }
+ }
+ RTL_W8(Config2, cfg2);
+ return msi;
+}
+
+static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
+{
+ if (tp->features & RTL_FEATURE_MSI) {
+ pci_disable_msi(pdev);
+ tp->features &= ~RTL_FEATURE_MSI;
+ }
+}
+
+static const struct net_device_ops rtl8169_netdev_ops = {
+ .ndo_open = rtl8169_open,
+ .ndo_stop = rtl8169_close,
+ .ndo_get_stats = rtl8169_get_stats,
+ .ndo_start_xmit = rtl8169_start_xmit,
+ .ndo_tx_timeout = rtl8169_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = rtl8169_change_mtu,
+ .ndo_set_mac_address = rtl_set_mac_address,
+ .ndo_do_ioctl = rtl8169_ioctl,
+ .ndo_set_multicast_list = rtl_set_rx_mode,
+#ifdef CONFIG_R8169_VLAN
+ .ndo_vlan_rx_register = rtl8169_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8169_netpoll,
+#endif
+
+};
+
+static int __devinit
+rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
+ const unsigned int region = cfg->region;
+ struct rtl8169_private *tp;
+ struct mii_if_info *mii;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ unsigned int i;
+ int rc;
+
+ if (netif_msg_drv(&debug)) {
+ printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
+ MODULENAME, RTL8169_VERSION);
+ }
+
+ dev = alloc_etherdev(sizeof (*tp));
+ if (!dev) {
+ if (netif_msg_drv(&debug))
+ dev_err(&pdev->dev, "unable to alloc new ethernet\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ dev->netdev_ops = &rtl8169_netdev_ops;
+ tp = netdev_priv(dev);
+ tp->dev = dev;
+ tp->pci_dev = pdev;
+ tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
+
+ mii = &tp->mii;
+ mii->dev = dev;
+ mii->mdio_read = rtl_mdio_read;
+ mii->mdio_write = rtl_mdio_write;
+ mii->phy_id_mask = 0x1f;
+ mii->reg_num_mask = 0x1f;
+ mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII);
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ rc = pci_enable_device(pdev);
+ if (rc < 0) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "enable failure\n");
+ goto err_out_free_dev_1;
+ }
+
+ rc = pci_set_mwi(pdev);
+ if (rc < 0)
+ goto err_out_disable_2;
+
+ /* make sure PCI base addr 1 is MMIO */
+ if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "region #%d not an MMIO resource, aborting\n",
+ region);
+ }
+ rc = -ENODEV;
+ goto err_out_mwi_3;
+ }
+
+ /* check for weird/broken PCI region reporting */
+ if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "Invalid PCI region size(s), aborting\n");
+ }
+ rc = -ENODEV;
+ goto err_out_mwi_3;
+ }
+
+ rc = pci_request_regions(pdev, MODULENAME);
+ if (rc < 0) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "could not request regions.\n");
+ goto err_out_mwi_3;
+ }
+
+ tp->cp_cmd = PCIMulRW | RxChkSum;
+
+ if ((sizeof(dma_addr_t) > 4) &&
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
+ tp->cp_cmd |= PCIDAC;
+ dev->features |= NETIF_F_HIGHDMA;
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc < 0) {
+ if (netif_msg_probe(tp)) {
+ dev_err(&pdev->dev,
+ "DMA configuration failed.\n");
+ }
+ goto err_out_free_res_4;
+ }
+ }
+
+ /* ioremap MMIO region */
+ ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
+ if (!ioaddr) {
+ if (netif_msg_probe(tp))
+ dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
+ rc = -EIO;
+ goto err_out_free_res_4;
+ }
+
+ tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (!tp->pcie_cap && netif_msg_probe(tp))
+ dev_info(&pdev->dev, "no PCI Express capability\n");
+
+ RTL_W16(IntrMask, 0x0000);
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 0; i < 100; i++) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ msleep_interruptible(1);
+ }
+
+ RTL_W16(IntrStatus, 0xffff);
+
+ pci_set_master(pdev);
+
+ /* Identify chip attached to board */
+ rtl8169_get_mac_version(tp, ioaddr);
+
+ /* Use appropriate default if unknown */
+ if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+ if (netif_msg_probe(tp)) {
+ dev_notice(&pdev->dev,
+ "unknown MAC, using family default\n");
+ }
+ tp->mac_version = cfg->default_ver;
+ }
+
+ rtl8169_print_mac_version(tp);
+
+ for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
+ if (tp->mac_version == rtl_chip_info[i].mac_version)
+ break;
+ }
+ if (i == ARRAY_SIZE(rtl_chip_info)) {
+ dev_err(&pdev->dev,
+ "driver bug, MAC version not found in rtl_chip_info\n");
+ goto err_out_msi_5;
+ }
+ tp->chipset = i;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+ RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+ if ((RTL_R8(Config3) & (LinkUp | MagicPacket)) != 0)
+ tp->features |= RTL_FEATURE_WOL;
+ if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0)
+ tp->features |= RTL_FEATURE_WOL;
+ tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
+ (RTL_R8(PHYstatus) & TBI_Enable)) {
+ tp->set_speed = rtl8169_set_speed_tbi;
+ tp->get_settings = rtl8169_gset_tbi;
+ tp->phy_reset_enable = rtl8169_tbi_reset_enable;
+ tp->phy_reset_pending = rtl8169_tbi_reset_pending;
+ tp->link_ok = rtl8169_tbi_link_ok;
+ tp->do_ioctl = rtl_tbi_ioctl;
+
+ tp->phy_1000_ctrl_reg = ADVERTISE_1000FULL; /* Implied by TBI */
+ } else {
+ tp->set_speed = rtl8169_set_speed_xmii;
+ tp->get_settings = rtl8169_gset_xmii;
+ tp->phy_reset_enable = rtl8169_xmii_reset_enable;
+ tp->phy_reset_pending = rtl8169_xmii_reset_pending;
+ tp->link_ok = rtl8169_xmii_link_ok;
+ tp->do_ioctl = rtl_xmii_ioctl;
+ }
+
+ spin_lock_init(&tp->lock);
+
+ tp->mmio_addr = ioaddr;
+
+ /* Get MAC address */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ dev->dev_addr[i] = RTL_R8(MAC0 + i);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) ioaddr;
+
+ netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
+
+#ifdef CONFIG_R8169_VLAN
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+#endif
+
+ tp->intr_mask = 0xffff;
+ tp->align = cfg->align;
+ tp->hw_start = cfg->hw_start;
+ tp->intr_event = cfg->intr_event;
+ tp->napi_event = cfg->napi_event;
+
+ init_timer(&tp->timer);
+ tp->timer.data = (unsigned long) dev;
+ tp->timer.function = rtl8169_phy_timer;
+
+ rc = register_netdev(dev);
+ if (rc < 0)
+ goto err_out_msi_5;
+
+ pci_set_drvdata(pdev, dev);
+
+ if (netif_msg_probe(tp)) {
+ u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
+
+ printk(KERN_INFO "%s: %s at 0x%lx, "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
+ "XID %08x IRQ %d\n",
+ dev->name,
+ rtl_chip_info[tp->chipset].name,
+ dev->base_addr,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5], xid, dev->irq);
+ }
+
+ rtl8169_init_phy(dev, tp);
+
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
+ device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
+
+out:
+ return rc;
+
+err_out_msi_5:
+ rtl_disable_msi(pdev, tp);
+ iounmap(ioaddr);
+err_out_free_res_4:
+ pci_release_regions(pdev);
+err_out_mwi_3:
+ pci_clear_mwi(pdev);
+err_out_disable_2:
+ pci_disable_device(pdev);
+err_out_free_dev_1:
+ free_netdev(dev);
+ goto out;
+}
+
+static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ flush_scheduled_work();
+
+ unregister_netdev(dev);
+
+ /* restore original MAC address */
+ rtl_rar_set(tp, dev->perm_addr);
+
+ rtl_disable_msi(pdev, tp);
+ rtl8169_release_board(pdev, dev, tp->mmio_addr);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
+ unsigned int mtu)
+{
+ unsigned int max_frame = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ if (max_frame != 16383)
+ printk(KERN_WARNING "WARNING! Changing of MTU on this NIC"
+ "May lead to frame reception errors!\n");
+
+ tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
+}
+
+static int rtl8169_open(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ int retval = -ENOMEM;
+
+
+ /*
+ * Note that we use a magic value here, its wierd I know
+ * its done because, some subset of rtl8169 hardware suffers from
+ * a problem in which frames received that are longer than
+ * the size set in RxMaxSize register return garbage sizes
+ * when received. To avoid this we need to turn off filtering,
+ * which is done by setting a value of 16383 in the RxMaxSize register
+ * and allocating 16k frames to handle the largest possible rx value
+ * thats what the magic math below does.
+ */
+ rtl8169_set_rxbufsize(tp, 16383 - VLAN_ETH_HLEN - ETH_FCS_LEN);
+
+ /*
+ * Rx and Tx desscriptors needs 256 bytes alignment.
+ * pci_alloc_consistent provides more.
+ */
+ tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
+ &tp->TxPhyAddr);
+ if (!tp->TxDescArray)
+ goto out;
+
+ tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
+ &tp->RxPhyAddr);
+ if (!tp->RxDescArray)
+ goto err_free_tx_0;
+
+ retval = rtl8169_init_ring(dev);
+ if (retval < 0)
+ goto err_free_rx_1;
+
+ INIT_DELAYED_WORK(&tp->task, NULL);
+
+ smp_mb();
+
+ retval = request_irq(dev->irq, rtl8169_interrupt,
+ (tp->features & RTL_FEATURE_MSI) ? 0 : IRQF_SHARED,
+ dev->name, dev);
+ if (retval < 0)
+ goto err_release_ring_2;
+
+ napi_enable(&tp->napi);
+
+ rtl_hw_start(dev);
+
+ rtl8169_request_timer(dev);
+
+ rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+out:
+ return retval;
+
+err_release_ring_2:
+ rtl8169_rx_clear(tp);
+err_free_rx_1:
+ pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+err_free_tx_0:
+ pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
+ goto out;
+}
+
+static void rtl8169_hw_reset(void __iomem *ioaddr)
+{
+ /* Disable interrupts */
+ rtl8169_irq_mask_and_ack(ioaddr);
+
+ /* Reset the chipset */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+}
+
+static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 cfg = rtl8169_rx_config;
+
+ cfg |= (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ RTL_W32(RxConfig, cfg);
+
+ /* Set DMA burst size and Interframe Gap Time */
+ RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
+ (InterFrameGap << TxInterFrameGapShift));
+}
+
+static void rtl_hw_start(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int i;
+
+ /* Soft reset the chip. */
+ RTL_W8(ChipCmd, CmdReset);
+
+ /* Check that the chip has finished the reset. */
+ for (i = 0; i < 100; i++) {
+ if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+ break;
+ msleep_interruptible(1);
+ }
+
+ tp->hw_start(dev);
+
+ netif_start_queue(dev);
+}
+
+
+static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ /*
+ * Magic spell: some iop3xx ARM board needs the TxDescAddrHigh
+ * register to be written before TxDescAddrLow to work.
+ * Switching from MMIO to I/O access fixes the issue as well.
+ */
+ RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr) >> 32);
+ RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_BIT_MASK(32));
+ RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr) >> 32);
+ RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_BIT_MASK(32));
+}
+
+static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
+{
+ u16 cmd;
+
+ cmd = RTL_R16(CPlusCmd);
+ RTL_W16(CPlusCmd, cmd);
+ return cmd;
+}
+
+static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
+{
+ /* Low hurts. Let's disable the filtering. */
+ RTL_W16(RxMaxSize, rx_buf_sz + 1);
+}
+
+static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
+{
+ static const struct {
+ u32 mac_version;
+ u32 clk;
+ u32 val;
+ } cfg2_info [] = {
+ { RTL_GIGA_MAC_VER_05, PCI_Clock_33MHz, 0x000fff00 }, // 8110SCd
+ { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
+ { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
+ { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
+ }, *p = cfg2_info;
+ unsigned int i;
+ u32 clk;
+
+ clk = RTL_R8(Config2) & PCI_Clock_66MHz;
+ for (i = 0; i < ARRAY_SIZE(cfg2_info); i++, p++) {
+ if ((p->mac_version == mac_version) && (p->clk == clk)) {
+ RTL_W32(0x7c, p->val);
+ break;
+ }
+ }
+}
+
+static void rtl_hw_start_8169(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | PCIMulRW);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x08);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_04))
+ rtl_set_rx_tx_config_registers(tp);
+
+ tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+ dprintk("Set MAC Reg C+CR Offset 0xE0. "
+ "Bit-3 and bit-14 MUST be 1\n");
+ tp->cp_cmd |= (1 << 14);
+ }
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ rtl8169_set_magic_reg(ioaddr, tp->mac_version);
+
+ /*
+ * Undocumented corner. Supposedly:
+ * (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets
+ */
+ RTL_W16(IntrMitigate, 0x0000);
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ rtl_set_rx_tx_config_registers(tp);
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ /* Initially a 10 us delay. Turned it into a PCI commit. - FR */
+ RTL_R8(IntrMask);
+
+ RTL_W32(RxMissed, 0);
+
+ rtl_set_rx_mode(dev);
+
+ /* no early-rx interrupts */
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+static void rtl_tx_performance_tweak(struct pci_dev *pdev, u16 force)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ u16 ctl;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &ctl);
+ ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | force;
+ pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+}
+
+static void rtl_csi_access_enable(void __iomem *ioaddr)
+{
+ u32 csi;
+
+ csi = rtl_csi_read(ioaddr, 0x070c) & 0x00ffffff;
+ rtl_csi_write(ioaddr, 0x070c, csi | 0x27000000);
+}
+
+struct ephy_info {
+ unsigned int offset;
+ u16 mask;
+ u16 bits;
+};
+
+static void rtl_ephy_init(void __iomem *ioaddr, const struct ephy_info *e, int len)
+{
+ u16 w;
+
+ while (len-- > 0) {
+ w = (rtl_ephy_read(ioaddr, e->offset) & ~e->mask) | e->bits;
+ rtl_ephy_write(ioaddr, e->offset, w);
+ e++;
+ }
+}
+
+static void rtl_disable_clock_request(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ u16 ctl;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_LNKCTL, &ctl);
+ ctl &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
+ pci_write_config_word(pdev, cap + PCI_EXP_LNKCTL, ctl);
+ }
+}
+
+#define R8168_CPCMD_QUIRK_MASK (\
+ EnableBist | \
+ Mac_dbgo_oe | \
+ Force_half_dup | \
+ Force_rxflow_en | \
+ Force_txflow_en | \
+ Cxpl_dbg_sel | \
+ ASF | \
+ PktCntrDisable | \
+ Mac_dbgo_sel)
+
+static void rtl_hw_start_8168bb(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+
+ rtl_tx_performance_tweak(pdev,
+ (0x5 << MAX_READ_REQUEST_SHIFT) | PCI_EXP_DEVCTL_NOSNOOP_EN);
+}
+
+static void rtl_hw_start_8168bef(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8168bb(ioaddr, pdev);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ RTL_W8(Config4, RTL_R8(Config4) & ~(1 << 0));
+}
+
+static void __rtl_hw_start_8168cp(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ RTL_W8(Config1, RTL_R8(Config1) | Speed_down);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ rtl_disable_clock_request(pdev);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168cp[] = {
+ { 0x01, 0, 0x0001 },
+ { 0x02, 0x0800, 0x1000 },
+ { 0x03, 0, 0x0042 },
+ { 0x06, 0x0080, 0x0000 },
+ { 0x07, 0, 0x2000 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_ephy_init(ioaddr, e_info_8168cp, ARRAY_SIZE(e_info_8168cp));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168cp_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168cp_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ /* Magic. */
+ RTL_W8(DBG_REG, 0x20);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168c_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168c_1[] = {
+ { 0x02, 0x0800, 0x1000 },
+ { 0x03, 0, 0x0002 },
+ { 0x06, 0x0080, 0x0000 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(DBG_REG, 0x06 | FIX_NAK_1 | FIX_NAK_2);
+
+ rtl_ephy_init(ioaddr, e_info_8168c_1, ARRAY_SIZE(e_info_8168c_1));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8168c_2[] = {
+ { 0x01, 0, 0x0001 },
+ { 0x03, 0x0400, 0x0220 }
+ };
+
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_ephy_init(ioaddr, e_info_8168c_2, ARRAY_SIZE(e_info_8168c_2));
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8168c_2(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168c_4(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ __rtl_hw_start_8168cp(ioaddr, pdev);
+}
+
+static void rtl_hw_start_8168d(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_disable_clock_request(pdev);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8168(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ RTL_W16(IntrMitigate, 0x5151);
+
+ /* Work around for RxFIFO overflow. */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_11) {
+ tp->intr_event |= RxFIFOOver | PCSTimeout;
+ tp->intr_event &= ~RxOverflow;
+ }
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ rtl_set_rx_mode(dev);
+
+ RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
+ (InterFrameGap << TxInterFrameGapShift));
+
+ RTL_R8(IntrMask);
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_11:
+ rtl_hw_start_8168bb(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_17:
+ rtl_hw_start_8168bef(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_18:
+ rtl_hw_start_8168cp_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_19:
+ rtl_hw_start_8168c_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_20:
+ rtl_hw_start_8168c_2(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_21:
+ rtl_hw_start_8168c_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_22:
+ rtl_hw_start_8168c_4(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_23:
+ rtl_hw_start_8168cp_2(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_24:
+ rtl_hw_start_8168cp_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
+ rtl_hw_start_8168d(ioaddr, pdev);
+ break;
+
+ default:
+ printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
+ dev->name, tp->mac_version);
+ break;
+ }
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+#define R810X_CPCMD_QUIRK_MASK (\
+ EnableBist | \
+ Mac_dbgo_oe | \
+ Force_half_dup | \
+ Force_rxflow_en | \
+ Force_txflow_en | \
+ Cxpl_dbg_sel | \
+ ASF | \
+ PktCntrDisable | \
+ PCIDAC | \
+ PCIMulRW)
+
+static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ static const struct ephy_info e_info_8102e_1[] = {
+ { 0x01, 0, 0x6e65 },
+ { 0x02, 0, 0x091f },
+ { 0x03, 0, 0xc2f9 },
+ { 0x06, 0, 0xafb5 },
+ { 0x07, 0, 0x0e00 },
+ { 0x19, 0, 0xec80 },
+ { 0x01, 0, 0x2e65 },
+ { 0x01, 0, 0x6e65 }
+ };
+ u8 cfg1;
+
+ rtl_csi_access_enable(ioaddr);
+
+ RTL_W8(DBG_REG, FIX_NAK_1);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(Config1,
+ LEDS1 | LEDS0 | Speed_down | MEMMAP | IOMAP | VPD | PMEnable);
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ cfg1 = RTL_R8(Config1);
+ if ((cfg1 & LEDS0) && (cfg1 & LEDS1))
+ RTL_W8(Config1, cfg1 & ~LEDS0);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
+
+ rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1));
+}
+
+static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_csi_access_enable(ioaddr);
+
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+ RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable);
+ RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
+
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
+}
+
+static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+ rtl_hw_start_8102e_2(ioaddr, pdev);
+
+ rtl_ephy_write(ioaddr, 0x03, 0xc2f9);
+}
+
+static void rtl_hw_start_8101(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
+ (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
+ int cap = tp->pcie_cap;
+
+ if (cap) {
+ pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_NOSNOOP_EN);
+ }
+ }
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_07:
+ rtl_hw_start_8102e_1(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_08:
+ rtl_hw_start_8102e_3(ioaddr, pdev);
+ break;
+
+ case RTL_GIGA_MAC_VER_09:
+ rtl_hw_start_8102e_2(ioaddr, pdev);
+ break;
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ RTL_W8(EarlyTxThres, EarlyTxThld);
+
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+
+ tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+
+ RTL_W16(IntrMitigate, 0x0000);
+
+ rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+ rtl_set_rx_tx_config_registers(tp);
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ RTL_R8(IntrMask);
+
+ rtl_set_rx_mode(dev);
+
+ RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
+
+ RTL_W16(IntrMask, tp->intr_event);
+}
+
+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ int ret = 0;
+
+ if (new_mtu < ETH_ZLEN || new_mtu > SafeMtu)
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ if (!netif_running(dev))
+ goto out;
+
+ rtl8169_down(dev);
+
+ rtl8169_set_rxbufsize(tp, dev->mtu);
+
+ ret = rtl8169_init_ring(dev);
+ if (ret < 0)
+ goto out;
+
+ napi_enable(&tp->napi);
+
+ rtl_hw_start(dev);
+
+ rtl8169_request_timer(dev);
+
+out:
+ return ret;
+}
+
+static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc)
+{
+ desc->addr = cpu_to_le64(0x0badbadbadbadbadull);
+ desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask);
+}
+
+static void rtl8169_free_rx_skb(struct rtl8169_private *tp,
+ struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+
+ pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(*sk_buff);
+ *sk_buff = NULL;
+ rtl8169_make_unusable_by_asic(desc);
+}
+
+static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+ u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
+
+ desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz);
+}
+
+static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+ u32 rx_buf_sz)
+{
+ desc->addr = cpu_to_le64(mapping);
+ wmb();
+ rtl8169_mark_to_asic(desc, rx_buf_sz);
+}
+
+static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
+ struct net_device *dev,
+ struct RxDesc *desc, int rx_buf_sz,
+ unsigned int align)
+{
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ unsigned int pad;
+
+ pad = align ? align : NET_IP_ALIGN;
+
+ skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+ if (!skb)
+ goto err_out;
+
+ skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
+
+ mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
+out:
+ return skb;
+
+err_out:
+ rtl8169_make_unusable_by_asic(desc);
+ goto out;
+}
+
+static void rtl8169_rx_clear(struct rtl8169_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (tp->Rx_skbuff[i]) {
+ rtl8169_free_rx_skb(tp, tp->Rx_skbuff + i,
+ tp->RxDescArray + i);
+ }
+ }
+}
+
+static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
+ u32 start, u32 end)
+{
+ u32 cur;
+
+ for (cur = start; end - cur != 0; cur++) {
+ struct sk_buff *skb;
+ unsigned int i = cur % NUM_RX_DESC;
+
+ WARN_ON((s32)(end - cur) < 0);
+
+ if (tp->Rx_skbuff[i])
+ continue;
+
+ skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
+ tp->RxDescArray + i,
+ tp->rx_buf_sz, tp->align);
+ if (!skb)
+ break;
+
+ tp->Rx_skbuff[i] = skb;
+ }
+ return cur - start;
+}
+
+static inline void rtl8169_mark_as_last_descriptor(struct RxDesc *desc)
+{
+ desc->opts1 |= cpu_to_le32(RingEnd);
+}
+
+static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
+{
+ tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int rtl8169_init_ring(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ rtl8169_init_ring_indexes(tp);
+
+ memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
+ memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+ if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ goto err_out;
+
+ rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
+
+ return 0;
+
+err_out:
+ rtl8169_rx_clear(tp);
+ return -ENOMEM;
+}
+
+static void rtl8169_unmap_tx_skb(struct pci_dev *pdev, struct ring_info *tx_skb,
+ struct TxDesc *desc)
+{
+ unsigned int len = tx_skb->len;
+
+ pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+ desc->opts1 = 0x00;
+ desc->opts2 = 0x00;
+ desc->addr = 0x00;
+ tx_skb->len = 0;
+}
+
+static void rtl8169_tx_clear(struct rtl8169_private *tp)
+{
+ unsigned int i;
+
+ for (i = tp->dirty_tx; i < tp->dirty_tx + NUM_TX_DESC; i++) {
+ unsigned int entry = i % NUM_TX_DESC;
+ struct ring_info *tx_skb = tp->tx_skb + entry;
+ unsigned int len = tx_skb->len;
+
+ if (len) {
+ struct sk_buff *skb = tx_skb->skb;
+
+ rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb,
+ tp->TxDescArray + entry);
+ if (skb) {
+ dev_kfree_skb(skb);
+ tx_skb->skb = NULL;
+ }
+ tp->dev->stats.tx_dropped++;
+ }
+ }
+ tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void rtl8169_schedule_work(struct net_device *dev, work_func_t task)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ PREPARE_DELAYED_WORK(&tp->task, task);
+ schedule_delayed_work(&tp->task, 4);
+}
+
+static void rtl8169_wait_for_quiescence(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ synchronize_irq(dev->irq);
+
+ /* Wait for any pending NAPI task to complete */
+ napi_disable(&tp->napi);
+
+ rtl8169_irq_mask_and_ack(ioaddr);
+
+ tp->intr_mask = 0xffff;
+ RTL_W16(IntrMask, tp->intr_event);
+ napi_enable(&tp->napi);
+}
+
+static void rtl8169_reinit_task(struct work_struct *work)
+{
+ struct rtl8169_private *tp =
+ container_of(work, struct rtl8169_private, task.work);
+ struct net_device *dev = tp->dev;
+ int ret;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ rtl8169_wait_for_quiescence(dev);
+ rtl8169_close(dev);
+
+ ret = rtl8169_open(dev);
+ if (unlikely(ret < 0)) {
+ if (net_ratelimit() && netif_msg_drv(tp)) {
+ printk(KERN_ERR PFX "%s: reinit failure (status = %d)."
+ " Rescheduling.\n", dev->name, ret);
+ }
+ rtl8169_schedule_work(dev, rtl8169_reinit_task);
+ }
+
+out_unlock:
+ rtnl_unlock();
+}
+
+static void rtl8169_reset_task(struct work_struct *work)
+{
+ struct rtl8169_private *tp =
+ container_of(work, struct rtl8169_private, task.work);
+ struct net_device *dev = tp->dev;
+
+ rtnl_lock();
+
+ if (!netif_running(dev))
+ goto out_unlock;
+
+ rtl8169_wait_for_quiescence(dev);
+
+ rtl8169_rx_interrupt(dev, tp, tp->mmio_addr, ~(u32)0);
+ rtl8169_tx_clear(tp);
+
+ if (tp->dirty_rx == tp->cur_rx) {
+ rtl8169_init_ring_indexes(tp);
+ rtl_hw_start(dev);
+ netif_wake_queue(dev);
+ rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+ } else {
+ if (net_ratelimit() && netif_msg_intr(tp)) {
+ printk(KERN_EMERG PFX "%s: Rx buffers shortage\n",
+ dev->name);
+ }
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ }
+
+out_unlock:
+ rtnl_unlock();
+}
+
+static void rtl8169_tx_timeout(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ rtl8169_hw_reset(tp->mmio_addr);
+
+ /* Let's wait a bit while any (async) irq lands on */
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+}
+
+static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
+ u32 opts1)
+{
+ struct skb_shared_info *info = skb_shinfo(skb);
+ unsigned int cur_frag, entry;
+ struct TxDesc * uninitialized_var(txd);
+
+ entry = tp->cur_tx;
+ for (cur_frag = 0; cur_frag < info->nr_frags; cur_frag++) {
+ skb_frag_t *frag = info->frags + cur_frag;
+ dma_addr_t mapping;
+ u32 status, len;
+ void *addr;
+
+ entry = (entry + 1) % NUM_TX_DESC;
+
+ txd = tp->TxDescArray + entry;
+ len = frag->size;
+ addr = ((void *) page_address(frag->page)) + frag->page_offset;
+ mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+
+ /* anti gcc 2.95.3 bugware (sic) */
+ status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+
+ txd->opts1 = cpu_to_le32(status);
+ txd->addr = cpu_to_le64(mapping);
+
+ tp->tx_skb[entry].len = len;
+ }
+
+ if (cur_frag) {
+ tp->tx_skb[entry].skb = skb;
+ txd->opts1 |= cpu_to_le32(LastFrag);
+ }
+
+ return cur_frag;
+}
+
+static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev)
+{
+ if (dev->features & NETIF_F_TSO) {
+ u32 mss = skb_shinfo(skb)->gso_size;
+
+ if (mss)
+ return LargeSend | ((mss & MSSMask) << MSSShift);
+ }
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ const struct iphdr *ip = ip_hdr(skb);
+
+ if (ip->protocol == IPPROTO_TCP)
+ return IPCS | TCPCS;
+ else if (ip->protocol == IPPROTO_UDP)
+ return IPCS | UDPCS;
+ WARN_ON(1); /* we need a WARN() */
+ }
+ return 0;
+}
+
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned int frags, entry = tp->cur_tx % NUM_TX_DESC;
+ struct TxDesc *txd = tp->TxDescArray + entry;
+ void __iomem *ioaddr = tp->mmio_addr;
+ dma_addr_t mapping;
+ u32 status, len;
+ u32 opts1;
+
+ if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
+ if (netif_msg_drv(tp)) {
+ printk(KERN_ERR
+ "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ }
+ goto err_stop;
+ }
+
+ if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
+ goto err_stop;
+
+ opts1 = DescOwn | rtl8169_tso_csum(skb, dev);
+
+ frags = rtl8169_xmit_frags(tp, skb, opts1);
+ if (frags) {
+ len = skb_headlen(skb);
+ opts1 |= FirstFrag;
+ } else {
+ len = skb->len;
+ opts1 |= FirstFrag | LastFrag;
+ tp->tx_skb[entry].skb = skb;
+ }
+
+ mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tp->tx_skb[entry].len = len;
+ txd->addr = cpu_to_le64(mapping);
+ txd->opts2 = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
+
+ wmb();
+
+ /* anti gcc 2.95.3 bugware (sic) */
+ status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+ txd->opts1 = cpu_to_le32(status);
+
+ tp->cur_tx += frags + 1;
+
+ smp_wmb();
+
+ RTL_W8(TxPoll, NPQ); /* set polling bit */
+
+ if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
+ netif_stop_queue(dev);
+ smp_rmb();
+ if (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)
+ netif_wake_queue(dev);
+ }
+
+ return NETDEV_TX_OK;
+
+err_stop:
+ netif_stop_queue(dev);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_BUSY;
+}
+
+static void rtl8169_pcierr_interrupt(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 pci_status, pci_cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+ pci_read_config_word(pdev, PCI_STATUS, &pci_status);
+
+ if (netif_msg_intr(tp)) {
+ printk(KERN_ERR
+ "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
+ dev->name, pci_cmd, pci_status);
+ }
+
+ /*
+ * The recovery sequence below admits a very elaborated explanation:
+ * - it seems to work;
+ * - I did not see what else could be done;
+ * - it makes iop3xx happy.
+ *
+ * Feel free to adjust to your needs.
+ */
+ if (pdev->broken_parity_status)
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ else
+ pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+
+ pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
+
+ pci_write_config_word(pdev, PCI_STATUS,
+ pci_status & (PCI_STATUS_DETECTED_PARITY |
+ PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT));
+
+ /* The infamous DAC f*ckup only happens at boot time */
+ if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
+ if (netif_msg_intr(tp))
+ printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name);
+ tp->cp_cmd &= ~PCIDAC;
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ dev->features &= ~NETIF_F_HIGHDMA;
+ }
+
+ rtl8169_hw_reset(ioaddr);
+
+ rtl8169_schedule_work(dev, rtl8169_reinit_task);
+}
+
+static void rtl8169_tx_interrupt(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ unsigned int dirty_tx, tx_left;
+
+ dirty_tx = tp->dirty_tx;
+ smp_rmb();
+ tx_left = tp->cur_tx - dirty_tx;
+
+ while (tx_left > 0) {
+ unsigned int entry = dirty_tx % NUM_TX_DESC;
+ struct ring_info *tx_skb = tp->tx_skb + entry;
+ u32 len = tx_skb->len;
+ u32 status;
+
+ rmb();
+ status = le32_to_cpu(tp->TxDescArray[entry].opts1);
+ if (status & DescOwn)
+ break;
+
+ dev->stats.tx_bytes += len;
+ dev->stats.tx_packets++;
+
+ rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry);
+
+ if (status & LastFrag) {
+ dev_kfree_skb(tx_skb->skb);
+ tx_skb->skb = NULL;
+ }
+ dirty_tx++;
+ tx_left--;
+ }
+
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ smp_wmb();
+ if (netif_queue_stopped(dev) &&
+ (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) {
+ netif_wake_queue(dev);
+ }
+ /*
+ * 8168 hack: TxPoll requests are lost when the Tx packets are
+ * too close. Let's kick an extra TxPoll request when a burst
+ * of start_xmit activity is detected (if it is not detected,
+ * it is slow enough). -- FR
+ */
+ smp_rmb();
+ if (tp->cur_tx != dirty_tx)
+ RTL_W8(TxPoll, NPQ);
+ }
+}
+
+static inline int rtl8169_fragmented_frame(u32 status)
+{
+ return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
+}
+
+static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
+{
+ u32 opts1 = le32_to_cpu(desc->opts1);
+ u32 status = opts1 & RxProtoMask;
+
+ if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
+ ((status == RxProtoUDP) && !(opts1 & UDPFail)) ||
+ ((status == RxProtoIP) && !(opts1 & IPFail)))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+}
+
+static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
+ struct rtl8169_private *tp, int pkt_size,
+ dma_addr_t addr)
+{
+ struct sk_buff *skb;
+ bool done = false;
+
+ if (pkt_size >= rx_copybreak)
+ goto out;
+
+ skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
+ if (!skb)
+ goto out;
+
+ pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
+ PCI_DMA_FROMDEVICE);
+ skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
+ *sk_buff = skb;
+ done = true;
+out:
+ return done;
+}
+
+static int rtl8169_rx_interrupt(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr, u32 budget)
+{
+ unsigned int cur_rx, rx_left;
+ unsigned int delta, count;
+
+ cur_rx = tp->cur_rx;
+ rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+ rx_left = min(rx_left, budget);
+
+ for (; rx_left > 0; rx_left--, cur_rx++) {
+ unsigned int entry = cur_rx % NUM_RX_DESC;
+ struct RxDesc *desc = tp->RxDescArray + entry;
+ u32 status;
+
+ rmb();
+ status = le32_to_cpu(desc->opts1);
+
+ if (status & DescOwn)
+ break;
+ if (unlikely(status & RxRES)) {
+ if (netif_msg_rx_err(tp)) {
+ printk(KERN_INFO
+ "%s: Rx ERROR. status = %08x\n",
+ dev->name, status);
+ }
+ dev->stats.rx_errors++;
+ if (status & (RxRWT | RxRUNT))
+ dev->stats.rx_length_errors++;
+ if (status & RxCRC)
+ dev->stats.rx_crc_errors++;
+ if (status & RxFOVF) {
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ dev->stats.rx_fifo_errors++;
+ }
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ } else {
+ struct sk_buff *skb = tp->Rx_skbuff[entry];
+ dma_addr_t addr = le64_to_cpu(desc->addr);
+ int pkt_size = (status & 0x00001FFF) - 4;
+ struct pci_dev *pdev = tp->pci_dev;
+
+ /*
+ * The driver does not support incoming fragmented
+ * frames. They are seen as a symptom of over-mtu
+ * sized frames.
+ */
+ if (unlikely(rtl8169_fragmented_frame(status))) {
+ dev->stats.rx_dropped++;
+ dev->stats.rx_length_errors++;
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ continue;
+ }
+
+ rtl8169_rx_csum(skb, desc);
+
+ if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
+ pci_dma_sync_single_for_device(pdev, addr,
+ pkt_size, PCI_DMA_FROMDEVICE);
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ } else {
+ pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ tp->Rx_skbuff[entry] = NULL;
+ }
+
+ skb_put(skb, pkt_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
+ netif_receive_skb(skb);
+
+ dev->stats.rx_bytes += pkt_size;
+ dev->stats.rx_packets++;
+ }
+
+ /* Work around for AMD plateform. */
+ if ((desc->opts2 & cpu_to_le32(0xfffe000)) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_05)) {
+ desc->opts2 = 0;
+ cur_rx++;
+ }
+ }
+
+ count = cur_rx - tp->cur_rx;
+ tp->cur_rx = cur_rx;
+
+ delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ if (!delta && count && netif_msg_intr(tp))
+ printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name);
+ tp->dirty_rx += delta;
+
+ /*
+ * FIXME: until there is periodic timer to try and refill the ring,
+ * a temporary shortage may definitely kill the Rx process.
+ * - disable the asic to try and avoid an overflow and kick it again
+ * after refill ?
+ * - how do others driver handle this condition (Uh oh...).
+ */
+ if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp))
+ printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name);
+
+ return count;
+}
+
+static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int handled = 0;
+ int status;
+
+ /* loop handling interrupts until we have no new ones or
+ * we hit a invalid/hotplug case.
+ */
+ status = RTL_R16(IntrStatus);
+ while (status && status != 0xffff) {
+ handled = 1;
+
+ /* Handle all of the error cases first. These will reset
+ * the chip, so just exit the loop.
+ */
+ if (unlikely(!netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ break;
+ }
+
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ break;
+ }
+
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
+
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
+
+ /* We need to see the lastest version of tp->intr_mask to
+ * avoid ignoring an MSI interrupt and having to wait for
+ * another event which may never come.
+ */
+ smp_rmb();
+ if (status & tp->intr_mask & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
+
+ if (likely(napi_schedule_prep(&tp->napi)))
+ __napi_schedule(&tp->napi);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
+ }
+
+ /* We only get a new MSI interrupt when all active irq
+ * sources on the chip have been acknowledged. So, ack
+ * everything we've seen and check if new sources have become
+ * active to avoid blocking all interrupts from the chip.
+ */
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status = RTL_R16(IntrStatus);
+ }
+
+ return IRQ_RETVAL(handled);
+}
+
+static int rtl8169_poll(struct napi_struct *napi, int budget)
+{
+ struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
+ struct net_device *dev = tp->dev;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int work_done;
+
+ work_done = rtl8169_rx_interrupt(dev, tp, ioaddr, (u32) budget);
+ rtl8169_tx_interrupt(dev, tp, ioaddr);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ /* We need for force the visibility of tp->intr_mask
+ * for other CPUs, as we can loose an MSI interrupt
+ * and potentially wait for a retransmit timeout if we don't.
+ * The posted write to IntrMask is safe, as it will
+ * eventually make it to the chip and we won't loose anything
+ * until it does.
+ */
+ tp->intr_mask = 0xffff;
+ smp_wmb();
+ RTL_W16(IntrMask, tp->intr_event);
+ }
+
+ return work_done;
+}
+
+static void rtl8169_rx_missed(struct net_device *dev, void __iomem *ioaddr)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+
+ if (tp->mac_version > RTL_GIGA_MAC_VER_06)
+ return;
+
+ dev->stats.rx_missed_errors += (RTL_R32(RxMissed) & 0xffffff);
+ RTL_W32(RxMissed, 0);
+}
+
+static void rtl8169_down(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int intrmask;
+
+ rtl8169_delete_timer(dev);
+
+ netif_stop_queue(dev);
+
+ napi_disable(&tp->napi);
+
+core_down:
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ rtl8169_rx_missed(dev, ioaddr);
+
+ spin_unlock_irq(&tp->lock);
+
+ synchronize_irq(dev->irq);
+
+ /* Give a racing hard_start_xmit a few cycles to complete. */
+ synchronize_sched(); /* FIXME: should this be synchronize_irq()? */
+
+ /*
+ * And now for the 50k$ question: are IRQ disabled or not ?
+ *
+ * Two paths lead here:
+ * 1) dev->close
+ * -> netif_running() is available to sync the current code and the
+ * IRQ handler. See rtl8169_interrupt for details.
+ * 2) dev->change_mtu
+ * -> rtl8169_poll can not be issued again and re-enable the
+ * interruptions. Let's simply issue the IRQ down sequence again.
+ *
+ * No loop if hotpluged or major error (0xffff).
+ */
+ intrmask = RTL_R16(IntrMask);
+ if (intrmask && (intrmask != 0xffff))
+ goto core_down;
+
+ rtl8169_tx_clear(tp);
+
+ rtl8169_rx_clear(tp);
+}
+
+static int rtl8169_close(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ /* update counters before going down */
+ rtl8169_update_counters(dev);
+
+ rtl8169_down(dev);
+
+ free_irq(dev->irq, dev);
+
+ pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+ pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
+ tp->TxDescArray = NULL;
+ tp->RxDescArray = NULL;
+
+ return 0;
+}
+
+static void rtl_set_rx_mode(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ int rx_mode;
+ u32 tmp = 0;
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ if (netif_msg_link(tp)) {
+ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ }
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ unsigned int i;
+
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ tmp = rtl8169_rx_config | rx_mode |
+ (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+
+ if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
+ u32 data = mc_filter[0];
+
+ mc_filter[0] = swab32(mc_filter[1]);
+ mc_filter[1] = swab32(data);
+ }
+
+ RTL_W32(MAR0 + 0, mc_filter[0]);
+ RTL_W32(MAR0 + 4, mc_filter[1]);
+
+ RTL_W32(RxConfig, tmp);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+/**
+ * rtl8169_get_stats - Get rtl8169 read/write statistics
+ * @dev: The Ethernet Device to get statistics for
+ *
+ * Get TX/RX statistics for rtl8169
+ */
+static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave(&tp->lock, flags);
+ rtl8169_rx_missed(dev, ioaddr);
+ spin_unlock_irqrestore(&tp->lock, flags);
+ }
+
+ return &dev->stats;
+}
+
+static void rtl8169_net_suspend(struct net_device *dev)
+{
+ if (!netif_running(dev))
+ return;
+
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ rtl8169_net_suspend(dev);
+
+ return 0;
+}
+
+static int rtl8169_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_attach(dev);
+
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+ return 0;
+}
+
+static const struct dev_pm_ops rtl8169_pm_ops = {
+ .suspend = rtl8169_suspend,
+ .resume = rtl8169_resume,
+ .freeze = rtl8169_suspend,
+ .thaw = rtl8169_resume,
+ .poweroff = rtl8169_suspend,
+ .restore = rtl8169_resume,
+};
+
+#define RTL8169_PM_OPS (&rtl8169_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define RTL8169_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
+static void rtl_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rtl8169_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ rtl8169_net_suspend(dev);
+
+ /* restore original MAC address */
+ rtl_rar_set(tp, dev->perm_addr);
+
+ spin_lock_irq(&tp->lock);
+
+ rtl8169_asic_down(ioaddr);
+
+ spin_unlock_irq(&tp->lock);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ /* WoL fails with some 8168 when the receiver is disabled. */
+ if (tp->features & RTL_FEATURE_WOL) {
+ pci_clear_master(pdev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ }
+
+ pci_wake_from_d3(pdev, true);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+static struct pci_driver rtl8169_pci_driver = {
+ .name = MODULENAME,
+ .id_table = rtl8169_pci_tbl,
+ .probe = rtl8169_init_one,
+ .remove = __devexit_p(rtl8169_remove_one),
+ .shutdown = rtl_shutdown,
+ .driver.pm = RTL8169_PM_OPS,
+};
+
+static int __init rtl8169_init_module(void)
+{
+ return pci_register_driver(&rtl8169_pci_driver);
+}
+
+static void __exit rtl8169_cleanup_module(void)
+{
+ pci_unregister_driver(&rtl8169_pci_driver);
+}
+
+module_init(rtl8169_init_module);
+module_exit(rtl8169_cleanup_module);
--- a/examples/Kbuild.in Fri May 13 15:33:16 2011 +0200
+++ b/examples/Kbuild.in Fri May 13 15:34:20 2011 +0200
@@ -35,4 +35,5 @@
obj-m += tty/
endif
+
#------------------------------------------------------------------------------
--- a/examples/Makefile.am Fri May 13 15:33:16 2011 +0200
+++ b/examples/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -40,12 +40,28 @@
tty
endif
+if ENABLE_RTDM
+if ENABLE_XENOMAI
+SUBDIRS += \
+ xenomai \
+ xenomai_posix
+endif
+
+if ENABLE_RTAI
+SUBDIRS += \
+ rtai_rtdm
+endif
+endif
+
DIST_SUBDIRS = \
dc_rtai \
dc_user \
mini \
rtai \
tty \
+ xenomai \
+ xenomai_posix \
+ rtai_rtdm \
user
EXTRA_DIST = \
--- a/examples/dc_rtai/dc_rtai_sample.c Fri May 13 15:33:16 2011 +0200
+++ b/examples/dc_rtai/dc_rtai_sample.c Fri May 13 15:34:20 2011 +0200
@@ -229,8 +229,8 @@
}
ecrt_master_sync_slave_clocks(master);
ecrt_domain_queue(domain1);
+ rt_sem_signal(&master_sem);
ecrt_master_send(master);
- rt_sem_signal(&master_sem);
rt_task_wait_period();
}
@@ -238,30 +238,18 @@
/*****************************************************************************/
-void send_callback(void *cb_data)
+void request_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
-
- // too close to the next real time cycle: deny access...
- if (get_cycles() - t_last_cycle <= t_critical) {
- rt_sem_wait(&master_sem);
- ecrt_master_send_ext(m);
- rt_sem_signal(&master_sem);
- }
-}
-
-/*****************************************************************************/
-
-void receive_callback(void *cb_data)
+ rt_sem_wait(&master_sem);
+}
+
+/*****************************************************************************/
+
+void release_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
-
- // too close to the next real time cycle: deny access...
- if (get_cycles() - t_last_cycle <= t_critical) {
- rt_sem_wait(&master_sem);
- ecrt_master_receive(m);
- rt_sem_signal(&master_sem);
- }
+ rt_sem_signal(&master_sem);
}
/*****************************************************************************/
@@ -285,7 +273,7 @@
goto out_return;
}
- ecrt_master_callbacks(master, send_callback, receive_callback, master);
+ ecrt_master_callbacks(master, request_lock_callback, release_lock_callback, master);
printk(KERN_INFO PFX "Registering domain...\n");
if (!(domain1 = ecrt_master_create_domain(master))) {
--- a/examples/mini/mini.c Fri May 13 15:33:16 2011 +0200
+++ b/examples/mini/mini.c Fri May 13 15:34:20 2011 +0200
@@ -346,10 +346,9 @@
EC_WRITE_U8(domain1_pd + off_dig_out, blink ? 0x06 : 0x09);
// send process data
- down(&master_sem);
ecrt_domain_queue(domain1);
+ up(&master_sem);
ecrt_master_send(master);
- up(&master_sem);
// restart timer
timer.expires += HZ / FREQUENCY;
@@ -358,21 +357,17 @@
/*****************************************************************************/
-void send_callback(void *cb_data)
+void request_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
down(&master_sem);
- ecrt_master_send_ext(m);
- up(&master_sem);
-}
-
-/*****************************************************************************/
-
-void receive_callback(void *cb_data)
+}
+
+/*****************************************************************************/
+
+void release_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
- down(&master_sem);
- ecrt_master_receive(m);
up(&master_sem);
}
@@ -398,7 +393,7 @@
}
sema_init(&master_sem, 1);
- ecrt_master_callbacks(master, send_callback, receive_callback, master);
+ ecrt_master_callbacks(master, request_lock_callback, release_lock_callback, master);
printk(KERN_INFO PFX "Registering domain...\n");
if (!(domain1 = ecrt_master_create_domain(master))) {
--- a/examples/rtai/rtai_sample.c Fri May 13 15:33:16 2011 +0200
+++ b/examples/rtai/rtai_sample.c Fri May 13 15:34:20 2011 +0200
@@ -234,8 +234,8 @@
rt_sem_wait(&master_sem);
ecrt_domain_queue(domain1);
+ rt_sem_signal(&master_sem);
ecrt_master_send(master);
- rt_sem_signal(&master_sem);
rt_task_wait_period();
}
@@ -243,30 +243,18 @@
/*****************************************************************************/
-void send_callback(void *cb_data)
+void request_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
-
- // too close to the next real time cycle: deny access...
- if (get_cycles() - t_last_cycle <= t_critical) {
- rt_sem_wait(&master_sem);
- ecrt_master_send_ext(m);
- rt_sem_signal(&master_sem);
- }
-}
-
-/*****************************************************************************/
-
-void receive_callback(void *cb_data)
+ rt_sem_wait(&master_sem);
+}
+
+/*****************************************************************************/
+
+void release_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
-
- // too close to the next real time cycle: deny access...
- if (get_cycles() - t_last_cycle <= t_critical) {
- rt_sem_wait(&master_sem);
- ecrt_master_receive(m);
- rt_sem_signal(&master_sem);
- }
+ rt_sem_signal(&master_sem);
}
/*****************************************************************************/
@@ -292,7 +280,7 @@
goto out_return;
}
- ecrt_master_callbacks(master, send_callback, receive_callback, master);
+ ecrt_master_callbacks(master, request_lock_callback, release_lock_callback, master);
printk(KERN_INFO PFX "Registering domain...\n");
if (!(domain1 = ecrt_master_create_domain(master))) {
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/rtai_rtdm/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,40 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# the IgH EtherCAT Master; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+
+AM_CFLAGS = -Wall
+
+noinst_PROGRAMS = ec_rtai_rtdm_example
+
+ec_rtai_rtdm_example_SOURCES = main.c
+ec_rtai_rtdm_example_CFLAGS = -I. -I"$(RTAI_DIR)"/include -O2 -I"$(LINUX_SOURCE_DIR)"/include -Wall -Wstrict-prototypes -pipe -I$(top_srcdir)/include
+ec_rtai_rtdm_example_LDFLAGS = -L"$(RTAI_DIR)"/lib -llxrt -lrtdm -lpthread -L$(top_builddir)/lib/.libs -lethercat
+
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/rtai_rtdm/README Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,40 @@
+-------------------------------------------------------------------------------
+
+$Id$
+
+-------------------------------------------------------------------------------
+
+This is a minimal example application for the use of the EtherCAT
+master realtime RTDM interface with an RTAI-LXRT thread.
+
+The application expects an RTAI installation. Configure the master sources
+specifying --enable-rtdm --with-rtai-dir to have the right include paths.
+
+Most probably you'll have different EtherCAT slaves present. Try adjusting the
+section "process data" in main.c to your bus configuration.
+
+There are some features that can be disabled by commenting out the respective
+defines at the head of main.c.
+
+---
+
+To build the example, call:
+
+make
+
+To run it, load the appropriate RTAI modules:
+insmod $(RTAI_DIR)/modules/rtai_hal.ko
+insmod $(RTAI_DIR)/modules/rtai_lxrt.ko
+insmod $(RTAI_DIR)/modules/rtai_sem.ko
+insmod $(RTAI_DIR)/modules/rtai_rtdm.ko
+
+Preload the EtherCAT RTDM module:
+modprobe ec_rtdm
+
+and call as root:
+
+./ec_rtai_rtdm_example
+
+...and watch the system logs for the outputs.
+
+-------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/rtai_rtdm/main.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,752 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * main.c Copyright (C) 2011 IgH Andreas Stewering-Bone
+ *
+ * This file is part of ethercatrtdm interface to IgH EtherCAT master
+ *
+ * The IgH EtherCAT master is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+
+
+
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <signal.h>
+
+#include <rtai_lxrt.h>
+#include <rtdm/rtdm.h>
+
+#include "../../include/ecrt.h"
+#include "../../include/ec_rtdm.h"
+
+
+
+#define rt_printf(X,Y)
+
+#define NSEC_PER_SEC 1000000000
+
+RT_TASK* task; // Stores a handle.
+int priority=0; // Highest
+int stack_size=0; // Use default (512)
+int msg_size=0; // Use default (256)
+
+static unsigned int cycle = 1000; /* 1 ms */
+
+int rt_fd = -1;
+int run=0;
+
+unsigned int sync_ref_counter = 0;
+
+CstructMstrAttach MstrAttach;
+
+/****************************************************************************/
+
+
+
+
+// Optional features
+#define CONFIGURE_PDOS 1
+
+
+/****************************************************************************/
+
+// EtherCAT
+static ec_master_t *master = NULL;
+static ec_master_state_t master_state = {};
+
+static ec_domain_t *domain1 = NULL;
+static ec_domain_state_t domain1_state = {};
+
+
+/****************************************************************************/
+static uint8_t *domain1_pd = NULL;
+
+// process data
+
+#define BusCoupler01_Pos 0, 0
+#define DigOutSlave01_Pos 0, 1
+#define DigOutSlave02_Pos 0, 2
+#define DigInSlave01_Pos 0, 3
+#define AnaOutSlave01_Pos 0, 4
+#define AnaInSlave01_Pos 0, 5
+#define BusCoupler02_Pos 0, 6
+#define AnaInSlave02_Pos 0, 7
+
+
+#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define Beckhoff_EL1014 0x00000002, 0x03f63052
+#define Beckhoff_EL2004 0x00000002, 0x07d43052
+#define Beckhoff_EL4132 0x00000002, 0x10243052
+#define Beckhoff_EL3102 0x00000002, 0x0c1e3052
+#define Beckhoff_EL4102 0x00000002, 0x10063052
+#define Beckhoff_EL6731 0x00000002, 0x1a4b3052
+#define Beckhoff_EL6600 0x00000002, 0x19c93052
+#define Beckhoff_EL3602 0x00000002, 0x0e123052
+#define Beckhoff_EL5151 0x00000002, 0x141f3052
+
+
+// offsets for PDO entries
+static unsigned int off_dig_out0 = 0;
+static unsigned int off_dig_out1 = 0;
+static unsigned int off_dig_out2 = 0;
+static unsigned int off_dig_out3 = 0;
+static unsigned int off_dig_in0 = 0;
+static unsigned int off_ana_out0 = 0;
+static unsigned int off_ana_out1 = 0;
+static unsigned int off_ana_in0_status = 0;
+static unsigned int off_ana_in0_value = 0;
+static unsigned int off_ana_in1_status = 0;
+static unsigned int off_ana_in1_value = 0;
+
+
+// process data
+unsigned int bit_position0=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position1=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position2=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position3=0; /* Pointer to a variable to store a bit */
+
+const static ec_pdo_entry_reg_t domain1_regs[] = {
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7000, 0x01, &off_dig_out0, &bit_position0},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7010, 0x01, &off_dig_out1, &bit_position1},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7020, 0x01, &off_dig_out2, &bit_position2},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7030, 0x01, &off_dig_out3, &bit_position3},
+ {DigInSlave01_Pos, Beckhoff_EL1014, 0x6000, 0x01, &off_dig_in0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3001, 0x01, &off_ana_out0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3002, 0x01, &off_ana_out1},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x01, &off_ana_in0_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x02, &off_ana_in0_value},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x01, &off_ana_in1_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x02, &off_ana_in1_value},
+ {}
+};
+
+char rt_dev_file[64];
+static unsigned int blink = 0;
+
+static ec_slave_config_t *sc_dig_out_01 = NULL;
+
+static ec_slave_config_t *sc_dig_out_02 = NULL;
+
+static ec_slave_config_t *sc_dig_in_01 = NULL;
+
+static ec_slave_config_t *sc_ana_out_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_02 = NULL;
+
+/*****************************************************************************/
+
+/* Slave 1, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_1_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_1_pdos[] = {
+ {0x1600, 1, slave_1_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_1_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_1_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_1_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_1_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_1_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 2, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_2_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_2_pdos[] = {
+ {0x1600, 1, slave_2_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_2_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_2_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_2_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_2_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_2_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 3, "EL1014"
+ * Vendor ID: 0x00000002
+ * Product code: 0x03f63052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_3_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Input */
+ {0x6010, 0x01, 1}, /* Input */
+ {0x6020, 0x01, 1}, /* Input */
+ {0x6030, 0x01, 1}, /* Input */
+};
+
+ec_pdo_info_t slave_3_pdos[] = {
+ {0x1a00, 1, slave_3_pdo_entries + 0}, /* Channel 1 */
+ {0x1a01, 1, slave_3_pdo_entries + 1}, /* Channel 2 */
+ {0x1a02, 1, slave_3_pdo_entries + 2}, /* Channel 3 */
+ {0x1a03, 1, slave_3_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_3_syncs[] = {
+ {0, EC_DIR_INPUT, 4, slave_3_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 4, "EL4132"
+ * Vendor ID: 0x00000002
+ * Product code: 0x10243052
+ * Revision number: 0x03f90000
+ */
+
+ec_pdo_entry_info_t slave_4_pdo_entries[] = {
+ {0x3001, 0x01, 16}, /* Output */
+ {0x3002, 0x01, 16}, /* Output */
+};
+
+ec_pdo_info_t slave_4_pdos[] = {
+ {0x1600, 1, slave_4_pdo_entries + 0}, /* RxPDO 01 mapping */
+ {0x1601, 1, slave_4_pdo_entries + 1}, /* RxPDO 02 mapping */
+};
+
+ec_sync_info_t slave_4_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 2, slave_4_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 5, "EL3102"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0c1e3052
+ * Revision number: 0x00000000
+ */
+
+ec_pdo_entry_info_t slave_5_pdo_entries[] = {
+ {0x3101, 0x01, 8}, /* Status */
+ {0x3101, 0x02, 16}, /* Value */
+ {0x3102, 0x01, 8}, /* Status */
+ {0x3102, 0x02, 16}, /* Value */
+};
+
+ec_pdo_info_t slave_5_pdos[] = {
+ {0x1a00, 2, slave_5_pdo_entries + 0}, /* TxPDO 001 mapping */
+ {0x1a01, 2, slave_5_pdo_entries + 2}, /* TxPDO 002 mapping */
+};
+
+ec_sync_info_t slave_5_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_5_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 6, "EL6731-0010"
+ * Vendor ID: 0x00000002
+ * Product code: 0x1a4b3052
+ * Revision number: 0x0011000a
+ */
+
+ec_sync_info_t slave_6_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+};
+
+
+/* Slave 7, "EL6601"
+ * Vendor ID: 0x00000002
+ * Product code: 0x19c93052
+ * Revision number: 0x00110000
+ */
+/*
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+*/
+
+/* Master 0, Slave 7, "EL3602"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0e123052
+ * Revision number: 0x00100000
+ */
+ec_pdo_entry_info_t slave_7_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Underrange */
+ {0x6000, 0x02, 1}, /* Overrange */
+ {0x6000, 0x03, 2}, /* Limit 1 */
+ {0x6000, 0x05, 2}, /* Limit 2 */
+ {0x6000, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1800, 0x07, 1},
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32}, /* Value */
+ {0x6010, 0x01, 1}, /* Underrange */
+ {0x6010, 0x02, 1}, /* Overrange */
+ {0x6010, 0x03, 2}, /* Limit 1 */
+ {0x6010, 0x05, 2}, /* Limit 2 */
+ {0x6010, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1801, 0x07, 1},
+ {0x1801, 0x09, 1},
+ {0x6010, 0x11, 32}, /* Value */
+};
+
+ec_pdo_info_t slave_7_pdos[] = {
+ {0x1a00, 9, slave_7_pdo_entries + 0}, /* AI TxPDO-Map Inputs Ch.1 */
+ {0x1a01, 9, slave_7_pdo_entries + 9}, /* AI TxPDO-Map Inputs Ch.2 */
+};
+
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_7_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Master 0, Slave 8, "EL5151"
+ * Vendor ID: 0x00000002
+ * Product code: 0x141f3052
+ * Revision number: 0x00130000
+ */
+
+ec_pdo_entry_info_t slave_8_pdo_entries[] = {
+ {0x6000, 0x01, 1},
+ {0x6000, 0x02, 1},
+ {0x6000, 0x03, 1},
+ {0x0000, 0x00, 4}, /* Gap */
+ {0x6000, 0x08, 1},
+ {0x6000, 0x09, 1},
+ {0x6000, 0x0a, 1},
+ {0x6000, 0x0b, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x6000, 0x0d, 1},
+ {0x1c32, 0x20, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32},
+ {0x6000, 0x12, 32},
+ {0x6000, 0x14, 32},
+};
+
+ec_pdo_info_t slave_8_pdos[] = {
+ {0x0000, 0, NULL},
+ {0x1a00, 15, slave_8_pdo_entries + 0},
+ {0x1a02, 1, slave_8_pdo_entries + 15},
+};
+
+ec_sync_info_t slave_8_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 1, slave_8_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_8_pdos + 1, EC_WD_DISABLE},
+ {0xff}
+};
+
+
+/*****************************************************************************/
+
+
+void rt_check_domain_state(void)
+{
+ ec_domain_state_t ds;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_domain_state(rt_fd,&ds);
+ }
+
+ if (ds.working_counter != domain1_state.working_counter)
+ {
+ rt_printf("Domain1: WC %u.\n", ds.working_counter);
+ }
+ if (ds.wc_state != domain1_state.wc_state)
+ {
+ rt_printf("Domain1: State %u.\n", ds.wc_state);
+ }
+
+ domain1_state = ds;
+}
+
+void rt_check_master_state(void)
+{
+ ec_master_state_t ms;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_state(rt_fd,&ms);
+ }
+
+ if (ms.slaves_responding != master_state.slaves_responding)
+ {
+ rt_printf("%u slave(s).\n", ms.slaves_responding);
+ }
+ if (ms.al_states != master_state.al_states)
+ {
+ rt_printf("AL states: 0x%02X.\n", ms.al_states);
+ }
+ if (ms.link_up != master_state.link_up)
+ {
+ rt_printf("Link is %s.\n", ms.link_up ? "up" : "down");
+ }
+ master_state = ms;
+}
+
+
+
+
+void rt_sync(void)
+{
+
+ RTIME now_ns;
+ uint64_t now;
+ now_ns = rt_get_cpu_time_ns();
+ now = (uint64_t)now_ns;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_application_time(rt_fd, &now);
+ }
+
+ if (sync_ref_counter) {
+ sync_ref_counter--;
+ } else {
+ sync_ref_counter = 9;
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_reference_clock(rt_fd);
+ }
+ }
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_slave_clocks(rt_fd) ;
+ }
+}
+
+/*****************************************************************************/
+
+/**********************************************************/
+void cleanup_all(void)
+{
+ run = 0;
+}
+
+void catch_signal(int sig)
+{
+ cleanup_all();
+}
+
+
+
+
+
+void my_cyclic(void)
+{
+
+ int counter = 0;
+ int divcounter = 0;
+ int divider = 10;
+ int period;
+
+ rt_set_periodic_mode();
+ period = (int) nano2count((RTIME)cycle*1000);
+ start_rt_timer(period);
+ rt_make_hard_real_time();
+ rt_task_make_periodic(task, rt_get_time() + 10*period, period);
+
+
+
+ while(1) {
+
+ rt_task_wait_period();
+
+
+ counter++;
+ if (counter>60000) {
+ run=0;
+ }
+
+ if(run == 0) {
+ rt_make_soft_real_time();
+ stop_rt_timer();
+ return;
+ }
+
+
+ // receive ethercat
+ ecrt_rtdm_master_recieve(rt_fd);
+ ecrt_rtdm_domain_process(rt_fd);
+
+ rt_check_domain_state();
+
+ if (divcounter ==0)
+ {
+ divcounter=divider;
+ rt_check_master_state();
+ }
+ divcounter--;
+ if ((counter % 200)==0)
+ {
+ blink = !blink;
+
+ }
+
+
+ EC_WRITE_U8(domain1_pd + off_dig_out0, blink ? 0x0 : 0x0F);
+ EC_WRITE_U16(domain1_pd + off_ana_out0, blink ? 0x0: 0xfff);
+
+ //sync DC
+ rt_sync();
+
+ // send process data
+ ecrt_rtdm_domain_queque(rt_fd);
+ ecrt_rtdm_master_send(rt_fd);
+ }
+ return;
+}
+
+
+
+int main(int argc, char *argv[])
+{
+ ec_slave_config_t *sc;
+ int rtstatus;
+
+
+
+ signal(SIGTERM, catch_signal);
+ signal(SIGINT, catch_signal);
+ signal(SIGHUP, catch_signal);
+
+ mlockall(MCL_CURRENT|MCL_FUTURE);
+
+
+
+ MstrAttach.masterindex = 0;
+
+ printf("request master\n");
+ master = ecrt_request_master(MstrAttach.masterindex);
+ if (!master)
+ return -1;
+
+
+ domain1 = ecrt_master_create_domain(master);
+ if (!domain1)
+ return -1;
+
+
+#ifdef CONFIGURE_PDOS
+
+ printf("Configuring PDOs...\n");
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_01 = ecrt_master_slave_config(master, DigOutSlave01_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_01, EC_END, slave_1_syncs))
+ {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_02 = ecrt_master_slave_config(master, DigOutSlave02_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_02, EC_END, slave_2_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el1014...\n");
+ sc_dig_in_01 = ecrt_master_slave_config(master, DigInSlave01_Pos, Beckhoff_EL1014);
+ if (!sc_dig_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL1014...\n");
+ if (ecrt_slave_config_pdos(sc_dig_in_01, EC_END, slave_3_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL4132...\n");
+ sc_ana_out_01 = ecrt_master_slave_config(master, AnaOutSlave01_Pos, Beckhoff_EL4132);
+ if (!sc_ana_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL4132...\n");
+ if (ecrt_slave_config_pdos(sc_ana_out_01, EC_END, slave_4_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3102...\n");
+ sc_ana_in_01 = ecrt_master_slave_config(master, AnaInSlave01_Pos, Beckhoff_EL3102);
+ if (!sc_ana_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL3102...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_01, EC_END, slave_5_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3602...\n");
+ sc_ana_in_02 = ecrt_master_slave_config(master, AnaInSlave02_Pos, Beckhoff_EL3602);
+ if (!sc_ana_in_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+
+ printf("Configuring EL3602...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_02, EC_END, slave_7_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+#endif
+
+ // Create configuration for bus coupler
+ sc = ecrt_master_slave_config(master, BusCoupler01_Pos, Beckhoff_EK1100);
+ if (!sc)
+ return -1;
+
+#ifdef CONFIGURE_PDOS
+ if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) {
+ fprintf(stderr, "PDO entry registration failed!\n");
+ return -1;
+ }
+#endif
+
+
+
+ sprintf(&rt_dev_file[0],"%s%u",EC_RTDM_DEV_FILE_NAME,0);
+
+
+ rt_fd = rt_dev_open( &rt_dev_file[0], 0);
+ if (rt_fd < 0) {
+ printf("can't open %s\n", &rt_dev_file[0]);
+ return -1;
+ }
+
+ MstrAttach.domainindex = ecrt_domain_index(domain1);
+
+ // attach the master over rtdm driver
+ rtstatus=ecrt_rtdm_master_attach(rt_fd, &MstrAttach);
+ if (rtstatus < 0)
+ {
+ printf("cannot attach to master over rtdm\n");
+ return -1;
+ }
+
+ printf("Activating master...\n");
+ if (ecrt_master_activate(master))
+ return -1;
+
+ if (!(domain1_pd = ecrt_domain_data(domain1))) {
+ return -1;
+ }
+ fprintf(stderr, "domain1_pd: 0x%.6x\n", (unsigned int)domain1_pd);
+
+
+
+ run=1;
+
+ /* Create cyclic RT-thread */
+ struct sched_param param;
+ param.sched_priority = sched_get_priority_max(SCHED_FIFO) - 1;
+ if( sched_setscheduler( 0, SCHED_FIFO, ¶m ) == -1 ) {
+ puts("ERROR IN SETTING THE SCHEDULER");
+ perror("errno");
+ exit(1);
+ }
+
+ task = rt_task_init( nam2num("ec_rtai_rtdm_example"), priority, stack_size, msg_size);
+
+
+ my_cyclic();
+
+ rt_task_delete(task);
+
+ if (rt_fd >= 0)
+ {
+ printf("closing rt device %s\n", &rt_dev_file[0]);
+
+ rt_dev_close(rt_fd);
+
+ }
+
+ printf("End of Program\n");
+ ecrt_release_master(master);
+
+ return 0;
+
+}
+
--- a/examples/tty/tty.c Fri May 13 15:33:16 2011 +0200
+++ b/examples/tty/tty.c Fri May 13 15:34:20 2011 +0200
@@ -141,8 +141,8 @@
// send process data
down(&master_sem);
ecrt_domain_queue(domain1);
+ up(&master_sem);
ecrt_master_send(master);
- up(&master_sem);
// restart timer
timer.expires += HZ / FREQUENCY;
@@ -151,21 +151,17 @@
/*****************************************************************************/
-void send_callback(void *cb_data)
+void request_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
down(&master_sem);
- ecrt_master_send_ext(m);
- up(&master_sem);
-}
-
-/*****************************************************************************/
-
-void receive_callback(void *cb_data)
+}
+
+/*****************************************************************************/
+
+void release_lock_callback(void *cb_data)
{
ec_master_t *m = (ec_master_t *) cb_data;
- down(&master_sem);
- ecrt_master_receive(m);
up(&master_sem);
}
@@ -186,7 +182,7 @@
}
sema_init(&master_sem, 1);
- ecrt_master_callbacks(master, send_callback, receive_callback, master);
+ ecrt_master_callbacks(master, request_lock_callback, release_lock_callback, master);
printk(KERN_INFO PFX "Registering domain...\n");
if (!(domain1 = ecrt_master_create_domain(master))) {
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,39 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# the IgH EtherCAT Master; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+
+AM_CFLAGS = -Wall
+
+noinst_PROGRAMS = ec_xenomai_example
+
+ec_xenomai_example_SOURCES = main.c
+ec_xenomai_example_CFLAGS = -I"$(XENOMAI_DIR)"/include -D_GNU_SOURCE -D_REENTRANT -Wall -pipe -D__XENO__ -I$(top_srcdir)/include
+ec_xenomai_example_LDFLAGS = -lrtdm -L$(top_builddir)/lib/.libs -lethercat -lnative -L"$(XENOMAI_DIR)"/lib -lrtdk -lxenomai -lpthread
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai/README Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,35 @@
+-------------------------------------------------------------------------------
+
+$Id$
+
+-------------------------------------------------------------------------------
+
+This is a minimal example application for the use of the EtherCAT
+master realtime RTDM interface with an XENOMAI NATIVE thread.
+
+The application expects an XENOMAI installation. Configure the master sources
+specifying --enable-rtdm --with-xenomai-dir to have the right include paths.
+
+Most probably you'll have different EtherCAT slaves present. Try adjusting the
+section "process data" in main.c to your bus configuration.
+
+There are some features that can be disabled by commenting out the respective
+defines at the head of main.c.
+
+---
+
+To build the example, call:
+
+make
+
+To run it, preload the EtherCAT RTDM module:
+
+modprobe ec_rtdm
+
+and call as root:
+
+./ec_xenomai_example
+
+...and watch the system logs for the outputs.
+
+-------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai/main.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,948 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * main.c Copyright (C) 2009-2010 Moehwald GmbH B.Benner
+ * 2011 IgH Andreas Stewering-Bone
+ *
+ * This file is part of ethercatrtdm interface to IgH EtherCAT master
+ *
+ * The Moehwald ethercatrtdm interface is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+#include <errno.h>
+#include <signal.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/resource.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <rtdm/rtdm.h>
+#include <native/task.h>
+#include <native/sem.h>
+#include <native/mutex.h>
+#include <native/timer.h>
+#include <rtdk.h>
+#include <pthread.h>
+
+/****************************************************************************/
+
+#include "../../include/ecrt.h"
+#include "../../include/ec_rtdm.h"
+
+
+RT_TASK my_task;
+
+int rt_fd = -1;
+int run=0;
+
+unsigned int sync_ref_counter = 0;
+
+CstructMstrAttach MstrAttach;
+
+/****************************************************************************/
+
+
+
+// Optional features
+#define CONFIGURE_PDOS 1
+//#define SDO_ACCESS 1
+
+/****************************************************************************/
+
+// EtherCAT
+static ec_master_t *master = NULL;
+static ec_master_state_t master_state = {};
+
+static ec_domain_t *domain1 = NULL;
+static ec_domain_state_t domain1_state = {};
+
+//static ec_slave_config_t *sc_ana_in = NULL;
+//static ec_slave_config_state_t sc_ana_in_state = {};
+
+// Timer
+static unsigned int sig_alarms = 0;
+//static unsigned int user_alarms = 0;
+
+/****************************************************************************/
+static uint8_t *domain1_pd = NULL;
+
+// process data
+
+#define BusCoupler01_Pos 0, 0
+#define DigOutSlave01_Pos 0, 1
+#define DigOutSlave02_Pos 0, 2
+#define DigInSlave01_Pos 0, 3
+#define AnaOutSlave01_Pos 0, 4
+#define AnaInSlave01_Pos 0, 5
+#define BusCoupler02_Pos 0, 6
+#define AnaInSlave02_Pos 0, 7
+#define DPSlave01_Pos 0, 8
+
+
+#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define Beckhoff_EL1014 0x00000002, 0x03f63052
+#define Beckhoff_EL2004 0x00000002, 0x07d43052
+#define Beckhoff_EL4132 0x00000002, 0x10243052
+#define Beckhoff_EL3102 0x00000002, 0x0c1e3052
+#define Beckhoff_EL4102 0x00000002, 0x10063052
+#define Beckhoff_EL6731 0x00000002, 0x1a4b3052
+#define Beckhoff_EL6600 0x00000002, 0x19c93052
+#define Beckhoff_EL3602 0x00000002, 0x0e123052
+#define Beckhoff_EL5151 0x00000002, 0x141f3052
+
+
+// offsets for PDO entries
+static unsigned int off_dig_out0 = 0;
+static unsigned int off_dig_out1 = 0;
+static unsigned int off_dig_out2 = 0;
+static unsigned int off_dig_out3 = 0;
+static unsigned int off_dig_out4 = 0;
+static unsigned int off_dig_out5 = 0;
+static unsigned int off_dig_out6 = 0;
+static unsigned int off_dig_out7 = 0;
+static unsigned int off_dig_in0 = 0;
+static unsigned int off_dig_in1 = 0;
+static unsigned int off_dig_in2 = 0;
+static unsigned int off_dig_in3 = 0;
+static unsigned int off_ana_out0 = 0;
+static unsigned int off_ana_out1 = 0;
+static unsigned int off_ana_in0_status = 0;
+static unsigned int off_ana_in0_value = 0;
+static unsigned int off_ana_in1_status = 0;
+static unsigned int off_ana_in1_value = 0;
+static unsigned int off_ana_in2_status = 0;
+static unsigned int off_ana_in2_value = 0;
+static unsigned int off_ana_in3_status = 0;
+static unsigned int off_ana_in3_value = 0;
+
+//static unsigned int off_dp_slave;
+
+// process data
+unsigned int bit_position0=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position1=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position2=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position3=0; /* Pointer to a variable to store a bit */
+
+const static ec_pdo_entry_reg_t domain1_regs[] = {
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7000, 0x01, &off_dig_out0, &bit_position0},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7010, 0x01, &off_dig_out1, &bit_position1},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7020, 0x01, &off_dig_out2, &bit_position2},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7030, 0x01, &off_dig_out3, &bit_position3},
+ {DigInSlave01_Pos, Beckhoff_EL1014, 0x6000, 0x01, &off_dig_in0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3001, 0x01, &off_ana_out0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3002, 0x01, &off_ana_out1},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x01, &off_ana_in0_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x02, &off_ana_in0_value},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x01, &off_ana_in1_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x02, &off_ana_in1_value},
+ {}
+};
+
+char rt_dev_file[64];
+static unsigned int counter = 0;
+static unsigned int blink = 0;
+
+static ec_slave_config_t *sc_dig_out_01 = NULL;
+
+static ec_slave_config_t *sc_dig_out_02 = NULL;
+
+static ec_slave_config_t *sc_dig_in_01 = NULL;
+
+static ec_slave_config_t *sc_ana_out_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_01 = NULL;
+
+static ec_slave_config_t *sc_dpslv_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_02 = NULL;
+
+/*****************************************************************************/
+
+/* Slave 1, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_1_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_1_pdos[] = {
+ {0x1600, 1, slave_1_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_1_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_1_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_1_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_1_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_1_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 2, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_2_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_2_pdos[] = {
+ {0x1600, 1, slave_2_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_2_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_2_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_2_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_2_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_2_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 3, "EL1014"
+ * Vendor ID: 0x00000002
+ * Product code: 0x03f63052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_3_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Input */
+ {0x6010, 0x01, 1}, /* Input */
+ {0x6020, 0x01, 1}, /* Input */
+ {0x6030, 0x01, 1}, /* Input */
+};
+
+ec_pdo_info_t slave_3_pdos[] = {
+ {0x1a00, 1, slave_3_pdo_entries + 0}, /* Channel 1 */
+ {0x1a01, 1, slave_3_pdo_entries + 1}, /* Channel 2 */
+ {0x1a02, 1, slave_3_pdo_entries + 2}, /* Channel 3 */
+ {0x1a03, 1, slave_3_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_3_syncs[] = {
+ {0, EC_DIR_INPUT, 4, slave_3_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 4, "EL4132"
+ * Vendor ID: 0x00000002
+ * Product code: 0x10243052
+ * Revision number: 0x03f90000
+ */
+
+ec_pdo_entry_info_t slave_4_pdo_entries[] = {
+ {0x3001, 0x01, 16}, /* Output */
+ {0x3002, 0x01, 16}, /* Output */
+};
+
+ec_pdo_info_t slave_4_pdos[] = {
+ {0x1600, 1, slave_4_pdo_entries + 0}, /* RxPDO 01 mapping */
+ {0x1601, 1, slave_4_pdo_entries + 1}, /* RxPDO 02 mapping */
+};
+
+ec_sync_info_t slave_4_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 2, slave_4_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 5, "EL3102"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0c1e3052
+ * Revision number: 0x00000000
+ */
+
+ec_pdo_entry_info_t slave_5_pdo_entries[] = {
+ {0x3101, 0x01, 8}, /* Status */
+ {0x3101, 0x02, 16}, /* Value */
+ {0x3102, 0x01, 8}, /* Status */
+ {0x3102, 0x02, 16}, /* Value */
+};
+
+ec_pdo_info_t slave_5_pdos[] = {
+ {0x1a00, 2, slave_5_pdo_entries + 0}, /* TxPDO 001 mapping */
+ {0x1a01, 2, slave_5_pdo_entries + 2}, /* TxPDO 002 mapping */
+};
+
+ec_sync_info_t slave_5_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_5_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 6, "EL6731-0010"
+ * Vendor ID: 0x00000002
+ * Product code: 0x1a4b3052
+ * Revision number: 0x0011000a
+ */
+
+ec_sync_info_t slave_6_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+};
+
+
+/* Slave 7, "EL6601"
+ * Vendor ID: 0x00000002
+ * Product code: 0x19c93052
+ * Revision number: 0x00110000
+ */
+/*
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+*/
+
+/* Master 0, Slave 7, "EL3602"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0e123052
+ * Revision number: 0x00100000
+ */
+ec_pdo_entry_info_t slave_7_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Underrange */
+ {0x6000, 0x02, 1}, /* Overrange */
+ {0x6000, 0x03, 2}, /* Limit 1 */
+ {0x6000, 0x05, 2}, /* Limit 2 */
+ {0x6000, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1800, 0x07, 1},
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32}, /* Value */
+ {0x6010, 0x01, 1}, /* Underrange */
+ {0x6010, 0x02, 1}, /* Overrange */
+ {0x6010, 0x03, 2}, /* Limit 1 */
+ {0x6010, 0x05, 2}, /* Limit 2 */
+ {0x6010, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1801, 0x07, 1},
+ {0x1801, 0x09, 1},
+ {0x6010, 0x11, 32}, /* Value */
+};
+
+ec_pdo_info_t slave_7_pdos[] = {
+ {0x1a00, 9, slave_7_pdo_entries + 0}, /* AI TxPDO-Map Inputs Ch.1 */
+ {0x1a01, 9, slave_7_pdo_entries + 9}, /* AI TxPDO-Map Inputs Ch.2 */
+};
+
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_7_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Master 0, Slave 8, "EL5151"
+ * Vendor ID: 0x00000002
+ * Product code: 0x141f3052
+ * Revision number: 0x00130000
+ */
+
+ec_pdo_entry_info_t slave_8_pdo_entries[] = {
+ {0x6000, 0x01, 1},
+ {0x6000, 0x02, 1},
+ {0x6000, 0x03, 1},
+ {0x0000, 0x00, 4}, /* Gap */
+ {0x6000, 0x08, 1},
+ {0x6000, 0x09, 1},
+ {0x6000, 0x0a, 1},
+ {0x6000, 0x0b, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x6000, 0x0d, 1},
+ {0x1c32, 0x20, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32},
+ {0x6000, 0x12, 32},
+ {0x6000, 0x14, 32},
+};
+
+ec_pdo_info_t slave_8_pdos[] = {
+ {0x0000, 0, NULL},
+ {0x1a00, 15, slave_8_pdo_entries + 0},
+ {0x1a02, 1, slave_8_pdo_entries + 15},
+};
+
+ec_sync_info_t slave_8_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 1, slave_8_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_8_pdos + 1, EC_WD_DISABLE},
+ {0xff}
+};
+
+
+/*****************************************************************************/
+
+#if SDO_ACCESS
+static ec_sdo_request_t *sdo;
+uint8_t *sdo_adr = NULL;
+#endif
+
+
+
+void rt_check_domain_state(void)
+{
+ ec_domain_state_t ds;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_domain_state(rt_fd,&ds);
+ }
+
+ if (ds.working_counter != domain1_state.working_counter)
+ {
+ rt_printf("Domain1: WC %u.\n", ds.working_counter);
+ }
+ if (ds.wc_state != domain1_state.wc_state)
+ {
+ rt_printf("Domain1: State %u.\n", ds.wc_state);
+ }
+
+ domain1_state = ds;
+}
+
+void rt_check_master_state(void)
+{
+ ec_master_state_t ms;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_state(rt_fd,&ms);
+ }
+
+ if (ms.slaves_responding != master_state.slaves_responding)
+ {
+ rt_printf("%u slave(s).\n", ms.slaves_responding);
+ }
+ if (ms.al_states != master_state.al_states)
+ {
+ rt_printf("AL states: 0x%02X.\n", ms.al_states);
+ }
+ if (ms.link_up != master_state.link_up)
+ {
+ rt_printf("Link is %s.\n", ms.link_up ? "up" : "down");
+ }
+ master_state = ms;
+}
+
+
+
+
+void rt_sync()
+{
+ RTIME now;
+ now = rt_timer_read();
+
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_application_time(rt_fd, &now);
+ }
+
+ if (sync_ref_counter) {
+ sync_ref_counter--;
+ } else {
+ sync_ref_counter = 9;
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_reference_clock(rt_fd);
+ }
+ }
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_slave_clocks(rt_fd) ;
+ }
+}
+
+/*****************************************************************************/
+
+#if SDO_ACCESS
+void read_sdo(void)
+{
+ switch (ecrt_sdo_request_state(sdo))
+ {
+ case EC_REQUEST_UNUSED: // request was not used yet
+ ecrt_sdo_request_read(sdo); // trigger first read
+ break;
+ case EC_REQUEST_BUSY:
+ fprintf(stderr, "Still busy...\n");
+ break;
+ case EC_REQUEST_SUCCESS:
+ fprintf(stderr, "SDO value: 0x%04X\n",
+ EC_READ_U16(ecrt_sdo_request_data(sdo)));
+ ecrt_sdo_request_read(sdo); // trigger next read
+ break;
+ case EC_REQUEST_ERROR:
+ fprintf(stderr, "Failed to read SDO!\n");
+ ecrt_sdo_request_read(sdo); // retry reading
+ break;
+ }
+}
+
+void PrintSDOState(void)
+{
+ switch (ecrt_sdo_request_state(sdo))
+ {
+ case EC_REQUEST_UNUSED: // request was not used yet
+ fprintf(stderr, "SDO State: EC_REQUEST_UNUSED\n"); // trigger first read
+ break;
+ case EC_REQUEST_BUSY:
+ fprintf(stderr, "SDO State: EC_REQUEST_BUSY\n");
+ break;
+ case EC_REQUEST_SUCCESS:
+ fprintf(stderr, "SDO State: EC_REQUEST_SUCCESS\n");
+ break;
+ case EC_REQUEST_ERROR:
+ fprintf(stderr, "SDO State: EC_REQUEST_ERROR\n");
+ break;
+ default:
+ fprintf(stderr, "SDO State: undefined\n");
+ break;
+ }
+}
+#endif
+
+
+static int cyccount=0;
+
+/****************************************************************************/
+
+void signal_handler(int signum) {
+ switch (signum) {
+ case SIGALRM:
+ sig_alarms++;
+ break;
+ }
+}
+
+
+/**********************************************************/
+/* REAL TIME TASK */
+/**********************************************************/
+void my_task_proc(void *arg)
+{
+ int counter = 0;
+ int divcounter = 0;
+ int divider = 10;
+ int ret;
+
+ RTIME periodns;
+ float period;
+
+
+ period=1E-3; //1kHz
+
+
+ periodns=(RTIME)(((double)period * 1E9) + 0.4999999);
+ rt_task_set_periodic(NULL, TM_NOW, periodns);
+
+ run=1;
+
+ ret = rt_task_set_mode(0, T_PRIMARY, NULL);
+ if (ret) {
+ rt_printf("error while rt_task_set_mode, code %d\n",ret);
+ return;
+ }
+
+
+ while (run) {
+ rt_task_wait_period(NULL);
+
+ counter++;
+ if (counter>600000) {
+ run=0;
+ return;
+ }
+
+ // receive ethercat
+ ecrt_rtdm_master_recieve(rt_fd);
+ ecrt_rtdm_domain_process(rt_fd);
+
+ rt_check_domain_state();
+
+ if (divcounter ==0)
+ {
+ divcounter=divider;
+ rt_check_master_state();
+ }
+ divcounter--;
+ if ((counter % 200)==0)
+ {
+ blink = !blink;
+
+ }
+
+
+ EC_WRITE_U8(domain1_pd + off_dig_out0, blink ? 0x0 : 0x0F);
+ EC_WRITE_U16(domain1_pd + off_ana_out0, blink ? 0x0: 0xfff);
+
+ //sync DC
+ rt_sync();
+
+ // send process data
+ ecrt_rtdm_domain_queque(rt_fd);
+ ecrt_rtdm_master_send(rt_fd);
+ }
+
+}
+
+
+/**********************************************************/
+/* CLEANING UP */
+/**********************************************************/
+void cleanup_all(void)
+{
+ printf("delete my_task\n");
+ rt_task_delete(&my_task);
+
+ if (rt_fd >= 0) {
+ printf("closing rt device %s\n", &rt_dev_file[0]);
+ rt_dev_close(rt_fd);
+
+ }
+}
+/****************************************************************************/
+
+void catch_signal(int sig) {
+ cleanup_all();
+ printf("exit\n");
+ exit(0);
+ return;
+}
+
+
+/****************************************************************************/
+
+int main(int argc, char **argv)
+{
+ ec_slave_config_t *sc;
+
+ int rtstatus;
+
+ mlockall(MCL_CURRENT | MCL_FUTURE);
+
+ /* Perform auto-init of rt_print buffers if the task doesn't do so */
+ rt_print_auto_init(1);
+
+ signal(SIGTERM, catch_signal);
+ signal(SIGINT, catch_signal);
+
+ MstrAttach.masterindex = 0;
+
+ printf("request master\n");
+ master = ecrt_request_master(MstrAttach.masterindex);
+ if (!master)
+ return -1;
+
+
+ domain1 = ecrt_master_create_domain(master);
+ if (!domain1)
+ return -1;
+
+
+#ifdef CONFIGURE_PDOS
+
+ printf("Configuring PDOs...\n");
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_01 = ecrt_master_slave_config(master, DigOutSlave01_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_01, EC_END, slave_1_syncs))
+ {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_02 = ecrt_master_slave_config(master, DigOutSlave02_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_02, EC_END, slave_2_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el1014...\n");
+ sc_dig_in_01 = ecrt_master_slave_config(master, DigInSlave01_Pos, Beckhoff_EL1014);
+ if (!sc_dig_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL1014...\n");
+ if (ecrt_slave_config_pdos(sc_dig_in_01, EC_END, slave_3_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL4132...\n");
+ sc_ana_out_01 = ecrt_master_slave_config(master, AnaOutSlave01_Pos, Beckhoff_EL4132);
+ if (!sc_ana_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL4132...\n");
+ if (ecrt_slave_config_pdos(sc_ana_out_01, EC_END, slave_4_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3102...\n");
+ sc_ana_in_01 = ecrt_master_slave_config(master, AnaInSlave01_Pos, Beckhoff_EL3102);
+ if (!sc_ana_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL3102...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_01, EC_END, slave_5_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3602...\n");
+ sc_ana_in_02 = ecrt_master_slave_config(master, AnaInSlave02_Pos, Beckhoff_EL3602);
+ if (!sc_ana_in_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ // DP Slave Parameter Set
+
+/* printf( "Creating SDO requests...\n");
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_ana_in_02, 0x8000, 0x06, 1))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+
+ EC_WRITE_U8(ecrt_sdo_request_data(sdo), 00);
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+
+*/
+ printf("Configuring EL3602...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_02, EC_END, slave_7_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+#endif
+
+ // Create configuration for bus coupler
+ sc = ecrt_master_slave_config(master, BusCoupler01_Pos, Beckhoff_EK1100);
+ if (!sc)
+ return -1;
+
+#ifdef CONFIGURE_PDOS
+ if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) {
+ fprintf(stderr, "PDO entry registration failed!\n");
+ return -1;
+ }
+#endif
+
+
+ printf("Get Configuring EL6731...\n");
+ sc_dpslv_01 = ecrt_master_slave_config(master, DPSlave01_Pos, Beckhoff_EL6731);
+ if (!sc_dpslv_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL6731...\n");
+ if (ecrt_slave_config_pdos(sc_dpslv_01, EC_END, slave_7_syncs))
+ {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+#if SDO_ACCESS
+
+
+ // DP Slave Parameter Set
+ fprintf(stderr, "Creating SDO requests...\n");
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_dpslv_01, 0x8000, 0, 1))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+ EC_WRITE_U8(ecrt_sdo_request_data(sdo), 0);
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+
+ // Station Address
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_dpslv_01, 0x8000, 1, 2))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+ EC_WRITE_U16(ecrt_sdo_request_data(sdo), 5);
+ //EC_WRITE_U8(ecrt_sdo_request_data(sdo), 00);
+ //EC_WRITE_U8(ecrt_sdo_request_data(sdo)+1, 10);
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+
+ // Device Type (DP Ident Number)
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_dpslv_01, 0x8000, 4, 4))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+ sdo_adr = ecrt_sdo_request_data(sdo);
+ EC_WRITE_U32(sdo_adr, 0x095F);
+ //EC_WRITE_U8(sdo_ad, 0x00); // Device Type
+ //EC_WRITE_U8(sdo_adr+1, 0x00);
+ //EC_WRITE_U8(sdo_adr+2, 0x09);
+ //EC_WRITE_U8(sdo_adr+3, 0x5F);
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+
+ // DP CfgData Slave
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_dpslv_01, 0x8002, 0, 244))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+ sdo_adr = ecrt_sdo_request_data(sdo);
+ EC_WRITE_U8(sdo_adr, 0x10); // Device Type
+ EC_WRITE_U8(sdo_adr+1, 0x20);
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+
+ // DP Slave Parameter Set
+ if (!(sdo = ecrt_slave_config_create_sdo_request(sc_dpslv_01, 0x8000, 0, 1))) {
+ fprintf(stderr, "Failed to create SDO request.\n");
+ return -1;
+ }
+
+ ecrt_sdo_request_timeout(sdo, 500); // ms
+
+ EC_WRITE_U8(ecrt_sdo_request_data(sdo), 0x33); // DP Slave Parameter Set
+ PrintSDOState();
+ ecrt_sdo_request_write(sdo);
+ PrintSDOState();
+#endif
+
+
+
+ sprintf(&rt_dev_file[0],"%s%u",EC_RTDM_DEV_FILE_NAME,0);
+
+
+ rt_fd = rt_dev_open( &rt_dev_file[0], 0);
+ if (rt_fd < 0) {
+ printf("can't open %s\n", &rt_dev_file[0]);
+ return -1;
+ }
+
+ MstrAttach.domainindex = ecrt_domain_index(domain1);
+
+ // attach the master over rtdm driver
+ rtstatus=ecrt_rtdm_master_attach(rt_fd, &MstrAttach);
+ if (rtstatus < 0)
+ {
+ printf("cannot attach to master over rtdm\n");
+ return -1;
+ }
+
+ printf("Activating master...\n");
+ if (ecrt_master_activate(master))
+ return -1;
+
+ if (!(domain1_pd = ecrt_domain_data(domain1))) {
+ return -1;
+ }
+ fprintf(stderr, "domain1_pd: 0x%.6x\n", (unsigned int)domain1_pd);
+
+
+
+ int ret;
+ run=1;
+
+ ret = rt_task_create(&my_task,"my_task",0,80,T_FPU);
+
+ printf("starting my_task\n");
+ ret = rt_task_start(&my_task,&my_task_proc,NULL);
+
+
+ while (run)
+ {
+ sched_yield();
+ }
+
+ rt_task_delete(&my_task);
+
+
+ if (rt_fd >= 0)
+ {
+ printf("closing rt device %s\n", &rt_dev_file[0]);
+
+ rt_dev_close(rt_fd);
+
+ }
+
+ printf("End of Program\n");
+ ecrt_release_master(master);
+
+ return 0;
+}
+
+/****************************************************************************/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai_posix/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,40 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# the IgH EtherCAT Master; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+
+AM_CFLAGS = -Wall
+
+noinst_PROGRAMS = ec_xenomai_posix_example
+
+ec_xenomai_posix_example_SOURCES = main.c
+ec_xenomai_posix_example_CFLAGS = -I"$(XENOMAI_DIR)"/include -D_GNU_SOURCE -D_REENTRANT -Wall -pipe -D__XENO__ -I"$(XENOMAI_DIR)"/include/posix -I$(top_srcdir)/include
+ec_xenomai_posix_example_LDFLAGS = -Wl,@"$(XENOMAI_DIR)"/lib/posix.wrappers -L"$(XENOMAI_DIR)"/lib -lpthread_rt -lrtdm -L$(top_builddir)/lib/.libs -lethercat -lrtdk -lxenomai -lpthread
+
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai_posix/README Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,35 @@
+-------------------------------------------------------------------------------
+
+$Id$
+
+-------------------------------------------------------------------------------
+
+This is a minimal example application for the use of the EtherCAT
+master realtime RTDM interface with an XENOMAI POSIX thread.
+
+The application expects an XENOMAI installation. Configure the master sources
+specifying --enable-rtdm --with-xenomai-dir to have the right include paths.
+
+Most probably you'll have different EtherCAT slaves present. Try adjusting the
+section "process data" in main.c to your bus configuration.
+
+There are some features that can be disabled by commenting out the respective
+defines at the head of main.c.
+
+---
+
+To build the example, call:
+
+make
+
+To run it, preload the EtherCAT RTDM module:
+
+modprobe ec_rtdm
+
+and call as root:
+
+./ec_xenomai_posix_example
+
+...and watch the system logs for the outputs.
+
+-------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/xenomai_posix/main.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,768 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * main.c Copyright (C) 2011 IgH Andreas Stewering-Bone
+ *
+ * This file is part of ethercatrtdm interface to IgH EtherCAT master
+ *
+ * The IgH EtherCAT master is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT Master is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+
+#include <errno.h>
+#include <mqueue.h>
+#include <signal.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <limits.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <time.h>
+
+#include <rtdm/rtdm.h>
+#include <rtdk.h>
+
+#include "../../include/ecrt.h"
+#include "../../include/ec_rtdm.h"
+
+#define NSEC_PER_SEC 1000000000
+
+static unsigned int cycle = 1000; /* 1 ms */
+
+static pthread_t cyclicthread;
+
+int rt_fd = -1;
+int run=0;
+
+unsigned int sync_ref_counter = 0;
+
+CstructMstrAttach MstrAttach;
+
+/****************************************************************************/
+
+
+
+
+// Optional features
+#define CONFIGURE_PDOS 1
+
+
+/****************************************************************************/
+
+// EtherCAT
+static ec_master_t *master = NULL;
+static ec_master_state_t master_state = {};
+
+static ec_domain_t *domain1 = NULL;
+static ec_domain_state_t domain1_state = {};
+
+
+/****************************************************************************/
+static uint8_t *domain1_pd = NULL;
+
+// process data
+
+#define BusCoupler01_Pos 0, 0
+#define DigOutSlave01_Pos 0, 1
+#define DigOutSlave02_Pos 0, 2
+#define DigInSlave01_Pos 0, 3
+#define AnaOutSlave01_Pos 0, 4
+#define AnaInSlave01_Pos 0, 5
+#define BusCoupler02_Pos 0, 6
+#define AnaInSlave02_Pos 0, 7
+
+
+#define Beckhoff_EK1100 0x00000002, 0x044c2c52
+#define Beckhoff_EL1014 0x00000002, 0x03f63052
+#define Beckhoff_EL2004 0x00000002, 0x07d43052
+#define Beckhoff_EL4132 0x00000002, 0x10243052
+#define Beckhoff_EL3102 0x00000002, 0x0c1e3052
+#define Beckhoff_EL4102 0x00000002, 0x10063052
+#define Beckhoff_EL6731 0x00000002, 0x1a4b3052
+#define Beckhoff_EL6600 0x00000002, 0x19c93052
+#define Beckhoff_EL3602 0x00000002, 0x0e123052
+#define Beckhoff_EL5151 0x00000002, 0x141f3052
+
+
+// offsets for PDO entries
+static unsigned int off_dig_out0 = 0;
+static unsigned int off_dig_out1 = 0;
+static unsigned int off_dig_out2 = 0;
+static unsigned int off_dig_out3 = 0;
+static unsigned int off_dig_in0 = 0;
+static unsigned int off_ana_out0 = 0;
+static unsigned int off_ana_out1 = 0;
+static unsigned int off_ana_in0_status = 0;
+static unsigned int off_ana_in0_value = 0;
+static unsigned int off_ana_in1_status = 0;
+static unsigned int off_ana_in1_value = 0;
+
+
+// process data
+unsigned int bit_position0=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position1=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position2=0; /* Pointer to a variable to store a bit */
+unsigned int bit_position3=0; /* Pointer to a variable to store a bit */
+
+const static ec_pdo_entry_reg_t domain1_regs[] = {
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7000, 0x01, &off_dig_out0, &bit_position0},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7010, 0x01, &off_dig_out1, &bit_position1},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7020, 0x01, &off_dig_out2, &bit_position2},
+ {DigOutSlave01_Pos, Beckhoff_EL2004, 0x7030, 0x01, &off_dig_out3, &bit_position3},
+ {DigInSlave01_Pos, Beckhoff_EL1014, 0x6000, 0x01, &off_dig_in0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3001, 0x01, &off_ana_out0},
+ {AnaOutSlave01_Pos, Beckhoff_EL4132, 0x3002, 0x01, &off_ana_out1},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x01, &off_ana_in0_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3101, 0x02, &off_ana_in0_value},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x01, &off_ana_in1_status},
+ {AnaInSlave01_Pos, Beckhoff_EL3102, 0x3102, 0x02, &off_ana_in1_value},
+ {}
+};
+
+char rt_dev_file[64];
+static unsigned int blink = 0;
+
+static ec_slave_config_t *sc_dig_out_01 = NULL;
+
+static ec_slave_config_t *sc_dig_out_02 = NULL;
+
+static ec_slave_config_t *sc_dig_in_01 = NULL;
+
+static ec_slave_config_t *sc_ana_out_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_01 = NULL;
+
+static ec_slave_config_t *sc_ana_in_02 = NULL;
+
+/*****************************************************************************/
+
+/* Slave 1, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_1_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_1_pdos[] = {
+ {0x1600, 1, slave_1_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_1_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_1_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_1_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_1_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_1_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 2, "EL2004"
+ * Vendor ID: 0x00000002
+ * Product code: 0x07d43052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_2_pdo_entries[] = {
+ {0x7000, 0x01, 1}, /* Output */
+ {0x7010, 0x01, 1}, /* Output */
+ {0x7020, 0x01, 1}, /* Output */
+ {0x7030, 0x01, 1}, /* Output */
+};
+
+ec_pdo_info_t slave_2_pdos[] = {
+ {0x1600, 1, slave_2_pdo_entries + 0}, /* Channel 1 */
+ {0x1601, 1, slave_2_pdo_entries + 1}, /* Channel 2 */
+ {0x1602, 1, slave_2_pdo_entries + 2}, /* Channel 3 */
+ {0x1603, 1, slave_2_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_2_syncs[] = {
+ {0, EC_DIR_OUTPUT, 4, slave_2_pdos + 0, EC_WD_ENABLE},
+ {0xff}
+};
+
+/* Slave 3, "EL1014"
+ * Vendor ID: 0x00000002
+ * Product code: 0x03f63052
+ * Revision number: 0x00100000
+ */
+
+ec_pdo_entry_info_t slave_3_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Input */
+ {0x6010, 0x01, 1}, /* Input */
+ {0x6020, 0x01, 1}, /* Input */
+ {0x6030, 0x01, 1}, /* Input */
+};
+
+ec_pdo_info_t slave_3_pdos[] = {
+ {0x1a00, 1, slave_3_pdo_entries + 0}, /* Channel 1 */
+ {0x1a01, 1, slave_3_pdo_entries + 1}, /* Channel 2 */
+ {0x1a02, 1, slave_3_pdo_entries + 2}, /* Channel 3 */
+ {0x1a03, 1, slave_3_pdo_entries + 3}, /* Channel 4 */
+};
+
+ec_sync_info_t slave_3_syncs[] = {
+ {0, EC_DIR_INPUT, 4, slave_3_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 4, "EL4132"
+ * Vendor ID: 0x00000002
+ * Product code: 0x10243052
+ * Revision number: 0x03f90000
+ */
+
+ec_pdo_entry_info_t slave_4_pdo_entries[] = {
+ {0x3001, 0x01, 16}, /* Output */
+ {0x3002, 0x01, 16}, /* Output */
+};
+
+ec_pdo_info_t slave_4_pdos[] = {
+ {0x1600, 1, slave_4_pdo_entries + 0}, /* RxPDO 01 mapping */
+ {0x1601, 1, slave_4_pdo_entries + 1}, /* RxPDO 02 mapping */
+};
+
+ec_sync_info_t slave_4_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 2, slave_4_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 5, "EL3102"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0c1e3052
+ * Revision number: 0x00000000
+ */
+
+ec_pdo_entry_info_t slave_5_pdo_entries[] = {
+ {0x3101, 0x01, 8}, /* Status */
+ {0x3101, 0x02, 16}, /* Value */
+ {0x3102, 0x01, 8}, /* Status */
+ {0x3102, 0x02, 16}, /* Value */
+};
+
+ec_pdo_info_t slave_5_pdos[] = {
+ {0x1a00, 2, slave_5_pdo_entries + 0}, /* TxPDO 001 mapping */
+ {0x1a01, 2, slave_5_pdo_entries + 2}, /* TxPDO 002 mapping */
+};
+
+ec_sync_info_t slave_5_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_5_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Slave 6, "EL6731-0010"
+ * Vendor ID: 0x00000002
+ * Product code: 0x1a4b3052
+ * Revision number: 0x0011000a
+ */
+
+ec_sync_info_t slave_6_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+};
+
+
+/* Slave 7, "EL6601"
+ * Vendor ID: 0x00000002
+ * Product code: 0x19c93052
+ * Revision number: 0x00110000
+ */
+/*
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {0xff}
+};
+*/
+
+/* Master 0, Slave 7, "EL3602"
+ * Vendor ID: 0x00000002
+ * Product code: 0x0e123052
+ * Revision number: 0x00100000
+ */
+ec_pdo_entry_info_t slave_7_pdo_entries[] = {
+ {0x6000, 0x01, 1}, /* Underrange */
+ {0x6000, 0x02, 1}, /* Overrange */
+ {0x6000, 0x03, 2}, /* Limit 1 */
+ {0x6000, 0x05, 2}, /* Limit 2 */
+ {0x6000, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1800, 0x07, 1},
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32}, /* Value */
+ {0x6010, 0x01, 1}, /* Underrange */
+ {0x6010, 0x02, 1}, /* Overrange */
+ {0x6010, 0x03, 2}, /* Limit 1 */
+ {0x6010, 0x05, 2}, /* Limit 2 */
+ {0x6010, 0x07, 1}, /* Error */
+ {0x0000, 0x00, 7}, /* Gap */
+ {0x1801, 0x07, 1},
+ {0x1801, 0x09, 1},
+ {0x6010, 0x11, 32}, /* Value */
+};
+
+ec_pdo_info_t slave_7_pdos[] = {
+ {0x1a00, 9, slave_7_pdo_entries + 0}, /* AI TxPDO-Map Inputs Ch.1 */
+ {0x1a01, 9, slave_7_pdo_entries + 9}, /* AI TxPDO-Map Inputs Ch.2 */
+};
+
+ec_sync_info_t slave_7_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_7_pdos + 0, EC_WD_DISABLE},
+ {0xff}
+};
+
+/* Master 0, Slave 8, "EL5151"
+ * Vendor ID: 0x00000002
+ * Product code: 0x141f3052
+ * Revision number: 0x00130000
+ */
+
+ec_pdo_entry_info_t slave_8_pdo_entries[] = {
+ {0x6000, 0x01, 1},
+ {0x6000, 0x02, 1},
+ {0x6000, 0x03, 1},
+ {0x0000, 0x00, 4}, /* Gap */
+ {0x6000, 0x08, 1},
+ {0x6000, 0x09, 1},
+ {0x6000, 0x0a, 1},
+ {0x6000, 0x0b, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x6000, 0x0d, 1},
+ {0x1c32, 0x20, 1},
+ {0x0000, 0x00, 1}, /* Gap */
+ {0x1800, 0x09, 1},
+ {0x6000, 0x11, 32},
+ {0x6000, 0x12, 32},
+ {0x6000, 0x14, 32},
+};
+
+ec_pdo_info_t slave_8_pdos[] = {
+ {0x0000, 0, NULL},
+ {0x1a00, 15, slave_8_pdo_entries + 0},
+ {0x1a02, 1, slave_8_pdo_entries + 15},
+};
+
+ec_sync_info_t slave_8_syncs[] = {
+ {0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
+ {1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
+ {2, EC_DIR_OUTPUT, 1, slave_8_pdos + 0, EC_WD_DISABLE},
+ {3, EC_DIR_INPUT, 2, slave_8_pdos + 1, EC_WD_DISABLE},
+ {0xff}
+};
+
+
+/*****************************************************************************/
+
+
+void rt_check_domain_state(void)
+{
+ ec_domain_state_t ds;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_domain_state(rt_fd,&ds);
+ }
+
+ if (ds.working_counter != domain1_state.working_counter)
+ {
+ rt_printf("Domain1: WC %u.\n", ds.working_counter);
+ }
+ if (ds.wc_state != domain1_state.wc_state)
+ {
+ rt_printf("Domain1: State %u.\n", ds.wc_state);
+ }
+
+ domain1_state = ds;
+}
+
+void rt_check_master_state(void)
+{
+ ec_master_state_t ms;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_state(rt_fd,&ms);
+ }
+
+ if (ms.slaves_responding != master_state.slaves_responding)
+ {
+ rt_printf("%u slave(s).\n", ms.slaves_responding);
+ }
+ if (ms.al_states != master_state.al_states)
+ {
+ rt_printf("AL states: 0x%02X.\n", ms.al_states);
+ }
+ if (ms.link_up != master_state.link_up)
+ {
+ rt_printf("Link is %s.\n", ms.link_up ? "up" : "down");
+ }
+ master_state = ms;
+}
+
+
+
+
+void rt_sync()
+{
+ struct timespec now;
+ uint64_t now_ns;
+ clock_gettime(CLOCK_REALTIME,&now);
+
+ now_ns = 1000000000LL*now.tv_sec + now.tv_nsec;
+
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_application_time(rt_fd, &now_ns);
+ }
+
+ if (sync_ref_counter) {
+ sync_ref_counter--;
+ } else {
+ sync_ref_counter = 9;
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_reference_clock(rt_fd);
+ }
+ }
+ if (rt_fd>=0)
+ {
+ ecrt_rtdm_master_sync_slave_clocks(rt_fd) ;
+ }
+}
+
+/*****************************************************************************/
+
+/**********************************************************/
+void cleanup_all(void)
+{
+ run = 0;
+}
+
+void catch_signal(int sig)
+{
+ cleanup_all();
+}
+
+
+
+
+
+void *my_thread(void *arg)
+{
+ struct timespec next_period;
+
+ int counter = 0;
+ int divcounter = 0;
+ int divider = 10;
+
+
+ clock_gettime(CLOCK_REALTIME, &next_period);
+ while(1) {
+ next_period.tv_nsec += cycle * 1000;
+ while (next_period.tv_nsec >= NSEC_PER_SEC) {
+ next_period.tv_nsec -= NSEC_PER_SEC;
+ next_period.tv_sec++;
+ }
+
+ clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &next_period, NULL);
+
+
+ counter++;
+ if (counter>60000) {
+ run=0;
+ return NULL;
+ }
+
+ if(run == 0) {
+ return NULL;
+ }
+
+
+ // receive ethercat
+ ecrt_rtdm_master_recieve(rt_fd);
+ ecrt_rtdm_domain_process(rt_fd);
+
+ rt_check_domain_state();
+
+ if (divcounter ==0)
+ {
+ divcounter=divider;
+ rt_check_master_state();
+ }
+ divcounter--;
+ if ((counter % 200)==0)
+ {
+ blink = !blink;
+
+ }
+
+
+ EC_WRITE_U8(domain1_pd + off_dig_out0, blink ? 0x0 : 0x0F);
+ EC_WRITE_U16(domain1_pd + off_ana_out0, blink ? 0x0: 0xfff);
+
+ //sync DC
+ rt_sync();
+
+ // send process data
+ ecrt_rtdm_domain_queque(rt_fd);
+ ecrt_rtdm_master_send(rt_fd);
+ }
+ return NULL;
+}
+
+
+
+int main(int argc, char *argv[])
+{
+ ec_slave_config_t *sc;
+ int rtstatus;
+
+
+
+ signal(SIGTERM, catch_signal);
+ signal(SIGINT, catch_signal);
+ signal(SIGHUP, catch_signal);
+
+ mlockall(MCL_CURRENT|MCL_FUTURE);
+
+
+
+ MstrAttach.masterindex = 0;
+
+ printf("request master\n");
+ master = ecrt_request_master(MstrAttach.masterindex);
+ if (!master)
+ return -1;
+
+
+ domain1 = ecrt_master_create_domain(master);
+ if (!domain1)
+ return -1;
+
+
+#ifdef CONFIGURE_PDOS
+
+ printf("Configuring PDOs...\n");
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_01 = ecrt_master_slave_config(master, DigOutSlave01_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_01, EC_END, slave_1_syncs))
+ {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el2004...\n");
+ sc_dig_out_02 = ecrt_master_slave_config(master, DigOutSlave02_Pos, Beckhoff_EL2004);
+ if (!sc_dig_out_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL2004...\n");
+ if (ecrt_slave_config_pdos(sc_dig_out_02, EC_END, slave_2_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring el1014...\n");
+ sc_dig_in_01 = ecrt_master_slave_config(master, DigInSlave01_Pos, Beckhoff_EL1014);
+ if (!sc_dig_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL1014...\n");
+ if (ecrt_slave_config_pdos(sc_dig_in_01, EC_END, slave_3_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL4132...\n");
+ sc_ana_out_01 = ecrt_master_slave_config(master, AnaOutSlave01_Pos, Beckhoff_EL4132);
+ if (!sc_ana_out_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL4132...\n");
+ if (ecrt_slave_config_pdos(sc_ana_out_01, EC_END, slave_4_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3102...\n");
+ sc_ana_in_01 = ecrt_master_slave_config(master, AnaInSlave01_Pos, Beckhoff_EL3102);
+ if (!sc_ana_in_01) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+ printf("Configuring EL3102...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_01, EC_END, slave_5_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+ printf("Get Configuring EL3602...\n");
+ sc_ana_in_02 = ecrt_master_slave_config(master, AnaInSlave02_Pos, Beckhoff_EL3602);
+ if (!sc_ana_in_02) {
+ fprintf(stderr, "Failed to get slave configuration.\n");
+ return -1;
+ }
+
+
+ printf("Configuring EL3602...\n");
+ if (ecrt_slave_config_pdos(sc_ana_in_02, EC_END, slave_7_syncs)) {
+ fprintf(stderr, "Failed to configure PDOs.\n");
+ return -1;
+ }
+
+#endif
+
+ // Create configuration for bus coupler
+ sc = ecrt_master_slave_config(master, BusCoupler01_Pos, Beckhoff_EK1100);
+ if (!sc)
+ return -1;
+
+#ifdef CONFIGURE_PDOS
+ if (ecrt_domain_reg_pdo_entry_list(domain1, domain1_regs)) {
+ fprintf(stderr, "PDO entry registration failed!\n");
+ return -1;
+ }
+#endif
+
+
+
+ sprintf(&rt_dev_file[0],"%s%u",EC_RTDM_DEV_FILE_NAME,0);
+
+
+ rt_fd = rt_dev_open( &rt_dev_file[0], 0);
+ if (rt_fd < 0) {
+ printf("can't open %s\n", &rt_dev_file[0]);
+ return -1;
+ }
+
+ MstrAttach.domainindex = ecrt_domain_index(domain1);
+
+ // attach the master over rtdm driver
+ rtstatus=ecrt_rtdm_master_attach(rt_fd, &MstrAttach);
+ if (rtstatus < 0)
+ {
+ printf("cannot attach to master over rtdm\n");
+ return -1;
+ }
+
+ printf("Activating master...\n");
+ if (ecrt_master_activate(master))
+ return -1;
+
+ if (!(domain1_pd = ecrt_domain_data(domain1))) {
+ return -1;
+ }
+ fprintf(stderr, "domain1_pd: 0x%.6x\n", (unsigned int)domain1_pd);
+
+
+
+ int ret;
+ run=1;
+
+ /* Create cyclic RT-thread */
+ struct sched_param param = { .sched_priority = 82 };
+ pthread_attr_t thattr;
+ pthread_attr_init(&thattr);
+ pthread_attr_setdetachstate(&thattr, PTHREAD_CREATE_JOINABLE);
+ pthread_attr_setinheritsched(&thattr, PTHREAD_EXPLICIT_SCHED);
+ pthread_attr_setschedpolicy(&thattr, SCHED_FIFO);
+ pthread_setschedparam(cyclicthread, SCHED_FIFO, ¶m);
+ pthread_set_name_np(cyclicthread, "ec_xenomai_posix_test");
+ ret = pthread_create(&cyclicthread, &thattr, &my_thread, NULL);
+ if (ret) {
+ fprintf(stderr, "%s: pthread_create cyclic task failed\n",
+ strerror(-ret));
+ goto failure;
+ }
+
+
+
+
+ while (run)
+ {
+ sched_yield();
+ }
+
+
+
+
+
+
+ if (rt_fd >= 0)
+ {
+ printf("closing rt device %s\n", &rt_dev_file[0]);
+
+ rt_dev_close(rt_fd);
+
+ }
+
+ printf("End of Program\n");
+ ecrt_release_master(master);
+
+ return 0;
+
+ failure:
+ pthread_kill(cyclicthread, SIGHUP);
+ pthread_join(cyclicthread, NULL);
+
+
+ return 1;
+}
+
--- a/include/Makefile.am Fri May 13 15:33:16 2011 +0200
+++ b/include/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -33,6 +33,7 @@
include_HEADERS = \
ecrt.h \
- ectty.h
+ ectty.h \
+ ec_rtdm.h
#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/ec_rtdm.h Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,78 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * ec_rtdm.h Copyright (C) 2009-2010 Moehwald GmbH B.Benner
+ * 2011 IgH Andreas Stewering-Bone
+ *
+ * This file is part of the IgH EtherCAT master
+ *
+ * The IgH EtherCAT master is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+#ifndef __ECRT_RTDM_H
+#define __ECRT_RTDM_H
+
+
+//
+// Basefilename of RTDM device
+//
+#define EC_RTDM_DEV_FILE_NAME "ec_rtdm"
+
+//
+// IOCTRL Values for RTDM_EXTENSION
+//
+// Realtime IOCTRL function
+#define EC_RTDM_MSTRATTACH 1 // attach to a running master
+#define EC_RTDM_MSTRGETMUTNAME 2 // return the mutexname
+#define EC_RTDM_MASTER_RECEIVE 3 // call the master receive
+#define EC_RTDM_DOMAIN_PROCESS 4 // process domain data
+#define EC_RTDM_DOMAIN_QUEQUE 5 // prepare domain data
+#define EC_RTDM_MASTER_SEND 6 // call the master send
+#define EC_RTDM_DOMAINSTATE 7 // get domain state
+#define EC_RTDM_MASTERSTATE 8 // get master state
+#define EC_RTDM_MASTER_APP_TIME 9 // set app time
+#define EC_RTDM_SYNC_REF_CLOCK 10 // sync ref clock
+#define EC_RTDM_SYNC_SLAVE_CLOCK 11 // sync slave clocks
+#define EC_RTDM_MASTER_SYNC_MONITOR_QUEQUE 12 // prepare DC sync information
+#define EC_RTDM_MASTER_SYNC_MONITOR_PROCESS 13 // get DC sync information
+
+typedef struct _CstructMstrAttach
+{
+ unsigned int domainindex;
+ unsigned int masterindex;
+} CstructMstrAttach;
+
+
+#define ecrt_rtdm_master_attach(X,Y) rt_dev_ioctl(X, EC_RTDM_MSTRATTACH, Y)
+#define ecrt_rtdm_master_recieve(X) rt_dev_ioctl(X, EC_RTDM_MASTER_RECEIVE)
+#define ecrt_rtdm_domain_process(X) rt_dev_ioctl(X, EC_RTDM_DOMAIN_PROCESS)
+#define ecrt_rtdm_domain_queque(X) rt_dev_ioctl(X, EC_RTDM_DOMAIN_QUEQUE)
+#define ecrt_rtdm_master_send(X) rt_dev_ioctl(X, EC_RTDM_MASTER_SEND)
+#define ecrt_rtdm_domain_state(X,Y) rt_dev_ioctl(X, EC_RTDM_DOMAINSTATE, Y)
+#define ecrt_rtdm_master_state(X,Y) rt_dev_ioctl(X, EC_RTDM_MASTERSTATE, Y)
+#define ecrt_rtdm_master_application_time(X,Y) rt_dev_ioctl(X, EC_RTDM_MASTER_APP_TIME, Y)
+#define ecrt_rtdm_master_sync_reference_clock(X) rt_dev_ioctl(X, EC_RTDM_SYNC_REF_CLOCK)
+#define ecrt_rtdm_master_sync_slave_clocks(X) rt_dev_ioctl(X, EC_RTDM_SYNC_SLAVE_CLOCK)
+#define ecrt_rtdm_master_sync_monitor_queque(X) rt_dev_ioctl(X, EC_RTDM_MASTER_MONITOR_QUEQUE)
+#define ecrt_rtdm_master_sync_monitor_process(X,Y) rt_dev_ioctl(X, EC_RTDM_MASTER_MONITOR_PROCESS,Y)
+
+#endif
+
+
--- a/include/ecrt.h Fri May 13 15:33:16 2011 +0200
+++ b/include/ecrt.h Fri May 13 15:34:20 2011 +0200
@@ -5,7 +5,7 @@
* Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
*
* This file is part of the IgH EtherCAT master userspace library.
- *
+ *
* The IgH EtherCAT master userspace library is free software; you can
* redistribute it and/or modify it under the terms of the GNU Lesser General
* Public License as published by the Free Software Foundation; version 2.1
@@ -19,9 +19,9 @@
* You should have received a copy of the GNU Lesser General Public License
* along with the IgH EtherCAT master userspace library. If not, see
* <http://www.gnu.org/licenses/>.
- *
+ *
* ---
- *
+ *
* The license mentioned above concerns the source code only. Using the
* EtherCAT technology and brand is only permitted in compliance with the
* industrial property and similar rights of Beckhoff Automation GmbH.
@@ -47,11 +47,9 @@
* ecrt_master_sync_slave_clocks() for offset and drift compensation. The
* EC_TIMEVAL2NANO() macro can be used for epoch time conversion, while the
* ecrt_master_sync_monitor_queue() and ecrt_master_sync_monitor_process()
- * methods can be used to monitor the synchrony.
+ * methods can be used to monitor the synchrony.
* - Improved the callback mechanism. ecrt_master_callbacks() now takes two
- * callback functions for sending and receiving datagrams.
- * ecrt_master_send_ext() is used to execute the sending of non-application
- * datagrams.
+ * callback functions for locking and unlocking the fsm datagram queue.
* - Added watchdog configuration (method ecrt_slave_config_watchdog(),
* #ec_watchdog_mode_t, \a watchdog_mode parameter in ec_sync_info_t and
* ecrt_slave_config_sync_manager()).
@@ -79,6 +77,9 @@
* and ecrt_master_read_idn() and ecrt_master_write_idn() to read/write IDNs
* ad-hoc via the user-space library.
* - Added ecrt_master_reset() to initiate retrying to configure slaves.
+ * - Added support for overlapping PDOs which allows inputs to use the same
+ * space as outputs on the frame. This reduces the frame length.
+ *
*
* @{
*/
@@ -136,6 +137,9 @@
*/
#define EC_MAX_STRING_LENGTH 64
+/** Maximum number of slave ports. */
+#define EC_MAX_PORTS 4
+
/** Timeval to nanoseconds conversion.
*
* This macro converts a Unix epoch time to EtherCAT DC time.
@@ -148,7 +152,7 @@
(((TV).tv_sec - 946684800ULL) * 1000000000ULL + (TV).tv_usec * 1000ULL)
/******************************************************************************
- * Data types
+ * Data types
*****************************************************************************/
struct ec_master;
@@ -193,7 +197,7 @@
/** Slave configuration state.
*
* This is used as an output parameter of ecrt_slave_config_state().
- *
+ *
* \see ecrt_slave_config_state().
*/
typedef struct {
@@ -221,12 +225,33 @@
typedef struct {
unsigned int slave_count; /**< Number of slaves in the bus. */
unsigned int link_up : 1; /**< \a true, if the network link is up. */
- uint8_t scan_busy; /**< \a true, while the master is scanning the bus */
+ uint8_t scan_busy; /**< \a true, while the master is scanning the bus */
uint64_t app_time; /**< Application time. */
} ec_master_info_t;
/*****************************************************************************/
+/** EtherCAT slave port descriptor.
+ */
+typedef enum {
+ EC_PORT_NOT_IMPLEMENTED, /**< Port is not implemented. */
+ EC_PORT_NOT_CONFIGURED, /**< Port is not configured. */
+ EC_PORT_EBUS, /**< Port is an e-bus. */
+ EC_PORT_MII /**< Port is a mii. */
+} ec_slave_port_desc_t;
+
+/*****************************************************************************/
+
+/** EtherCAT slave port information.
+ */
+typedef struct {
+ uint8_t link_up; /**< Link detected. */
+ uint8_t loop_closed; /**< Loop closed. */
+ uint8_t signal_detected; /**< Detected signal on RX port. */
+} ec_slave_port_link_t;
+
+/*****************************************************************************/
+
/** Slave information.
*
* This is used as an output parameter of ecrt_master_get_slave().
@@ -241,6 +266,13 @@
uint32_t serial_number; /**< Serial-Number stored on the slave. */
uint16_t alias; /**< The slaves alias if not equal to 0. */
int16_t current_on_ebus; /**< Used current in mA. */
+ struct {
+ ec_slave_port_desc_t desc;
+ ec_slave_port_link_t link;
+ uint32_t receive_time;
+ uint16_t next_slave;
+ uint32_t delay_to_next_dc;
+ } ports[EC_MAX_PORTS];
uint8_t al_state; /**< Current state of the slave. */
uint8_t error_flag; /**< Error flag for that slave. */
uint8_t sync_count; /**< Number of sync managers. */
@@ -312,9 +344,9 @@
/*****************************************************************************/
/** PDO configuration information.
- *
+ *
* This is the data type of the \a pdos field in ec_sync_info_t.
- *
+ *
* \see ecrt_slave_config_pdos().
*/
typedef struct {
@@ -363,7 +395,7 @@
uint8_t subindex; /**< PDO entry subindex. */
unsigned int *offset; /**< Pointer to a variable to store the PDO entry's
(byte-)offset in the process data. */
- unsigned int *bit_position; /**< Pointer to a variable to store a bit
+ unsigned int *bit_position; /**< Pointer to a variable to store a bit
position (0-7) within the \a offset. Can be
NULL, in which case an error is raised if the
PDO entry does not byte-align. */
@@ -409,7 +441,7 @@
unsigned int ecrt_version_magic(void);
/** Requests an EtherCAT master for realtime operation.
- *
+ *
* Before an application can access an EtherCAT master, it has to reserve one
* for exclusive use.
*
@@ -455,6 +487,23 @@
ec_master_t *master /**< EtherCAT master */
);
+
+#ifdef __KERNEL__
+/** Attach to a running master
+ *
+ * This function returns the master handle for the RTDM-Interface
+ *
+ * \return Pointer to the opened master, otherwise \a NULL.
+ */
+ec_master_t *ecrt_attach_master(
+ unsigned int master_index /**< Index of the master to request. */
+ );
+
+#endif // #ifdef __KERNEL__
+
+
+
+
/******************************************************************************
* Master methods
*****************************************************************************/
@@ -479,29 +528,50 @@
/** Sets the locking callbacks.
*
- * For concurrent master access, i. e. if other instances than the application
- * want to send and receive datagrams on the bus, the application has to
- * provide a callback mechanism. This method takes two function pointers as
- * its parameters. Asynchronous master access (like EoE processing) is only
- * possible if the callbacks have been set.
- *
- * The task of the send callback (\a send_cb) is to decide, if the bus is
- * currently accessible and whether or not to call the ecrt_master_send_ext()
- * method.
- *
- * The task of the receive callback (\a receive_cb) is to decide, if a call to
- * ecrt_master_receive() is allowed and to execute it respectively.
+ * For concurrent master access, the application has to provide a locking
+ * mechanism. The method takes two function pointers and a data value as
+ * its parameters.
+ * The arbitrary \a cb_data value will be passed as argument on every callback.
+ *
*/
void ecrt_master_callbacks(
ec_master_t *master, /**< EtherCAT master */
- void (*send_cb)(void *), /**< Datagram sending callback. */
- void (*receive_cb)(void *), /**< Receive callback. */
- void *cb_data /**< Arbitraty pointer passed to the callback functions.
- */
- );
+ void (*lock_cb)(void *), /**< Lock function. */
+ void (*unlock_cb)(void *), /**< Unlock function. */
+ void *cb_data /**< Arbitrary user data. */
+ );
+
+/** Returns domain structure pointer
+ *
+ * This functions return the domain structure pointer for usage inside the
+ * RTDM-Interface.
+ *
+ * \return Pointer to the domain on success, else NULL.
+ */
+ec_domain_t *ecrt_master_find_domain(
+ ec_master_t *master,
+ unsigned int index);
+
#endif /* __KERNEL__ */
+
+#ifndef __KERNEL__
+/** Return the domain index of a given domain strucure
+ *
+ * Return the domain index of a given domain strucure. Usage inside of the
+ * RTDM Interface
+ *
+ * \return Index of the domain strucure
+ *
+ */
+ unsigned int ecrt_domain_index(
+ ec_domain_t *domain
+ );
+
+#endif // #ifndef __KERNEL__
+
+
/** Creates a new process data domain.
*
* For process data exchange, at least one process data domain is needed.
@@ -515,6 +585,7 @@
ec_master_t *master /**< EtherCAT master. */
);
+
/** Obtains a slave configuration.
*
* Creates a slave configuration object for the given \a alias and \a position
@@ -784,15 +855,6 @@
ec_master_t *master /**< EtherCAT master. */
);
-/** Sends non-application datagrams.
- *
- * This method has to be called in the send callback function passed via
- * ecrt_master_callbacks() to allow the sending of non-application datagrams.
- */
-void ecrt_master_send_ext(
- ec_master_t *master /**< EtherCAT master. */
- );
-
/** Reads the current master state.
*
* Stores the master state information in the given \a state structure.
@@ -802,17 +864,29 @@
ec_master_state_t *state /**< Structure to store the information. */
);
+/** Reads the current master state and the al_state of all configured slaves.
+ *
+ * use this function instead of ecrt_master_state if there are unused
+ * slaves on the bus
+ * Stores the master state information in the given \a state structure.
+ * \see ecrt_master_state()
+ */
+void ecrt_master_configured_slaves_state(
+ const ec_master_t *master, /**< EtherCAT master. */
+ ec_master_state_t *state /**< Structure to store the information. */
+ );
+
/** Sets the application time.
*
* The master has to know the application's time when operating slaves with
* distributed clocks. The time is not incremented by the master itself, so
* this method has to be called cyclically.
- *
+ *
* The time is used when setting the slaves' <tt>System Time Offset</tt> and
* <tt>Cyclic Operation Start Time</tt> registers and when synchronizing the
* DC reference clock to the application time via
* ecrt_master_sync_reference_clock().
- *
+ *
* The time is defined as nanoseconds from 2000-01-01 00:00. Converting an
* epoch time can be done with the EC_TIMEVAL2NANO() macro.
*/
@@ -904,6 +978,17 @@
*/
);
+/** Configure wether a slave allows overlapping PDOs.
+ *
+ * Overlapping PDOs allows inputs to use the same space as outputs on the frame.
+ * This reduces the frame length.
+ */
+void ecrt_slave_config_overlapping_pdos(
+ ec_slave_config_t *sc, /**< Slave configuration. */
+ uint8_t allow_overlapping_pdos /**< Allow overlapping PDOs */
+ );
+
+
/** Add a PDO to a sync manager's PDO assignment.
*
* \see ecrt_slave_config_pdos()
@@ -921,7 +1006,7 @@
* This can be called before assigning PDOs via
* ecrt_slave_config_pdo_assign_add(), to clear the default assignment of a
* sync manager.
- *
+ *
* \see ecrt_slave_config_pdos()
*/
void ecrt_slave_config_pdo_assign_clear(
@@ -975,28 +1060,28 @@
* {0x3101, 1, 8}, // status
* {0x3101, 2, 16} // value
* };
- *
+ *
* ec_pdo_entry_info_t el3162_channel2[] = {
* {0x3102, 1, 8}, // status
* {0x3102, 2, 16} // value
* };
- *
+ *
* ec_pdo_info_t el3162_pdos[] = {
* {0x1A00, 2, el3162_channel1},
* {0x1A01, 2, el3162_channel2}
* };
- *
+ *
* ec_sync_info_t el3162_syncs[] = {
* {2, EC_DIR_OUTPUT},
* {3, EC_DIR_INPUT, 2, el3162_pdos},
* {0xff}
* };
- *
+ *
* if (ecrt_slave_config_pdos(sc_ana_in, EC_END, el3162_syncs)) {
* // handle error
* }
* \endcode
- *
+ *
* The next example shows, how to configure the PDO assignment only. The
* entries for each assigned PDO are taken from the PDO's default mapping.
* Please note, that PDO entry registration will fail, if the PDO
@@ -1007,11 +1092,11 @@
* {0x1600}, // Channel 1
* {0x1601} // Channel 2
* };
- *
+ *
* ec_sync_info_t syncs[] = {
* {3, EC_DIR_INPUT, 2, pdos},
* };
- *
+ *
* if (ecrt_slave_config_pdos(slave_config_ana_in, 1, syncs)) {
* // handle error
* }
@@ -1053,7 +1138,7 @@
uint16_t entry_index, /**< Index of the PDO entry to register. */
uint8_t entry_subindex, /**< Subindex of the PDO entry to register. */
ec_domain_t *domain, /**< Domain. */
- unsigned int *bit_position /**< Optional address if bit addressing
+ unsigned int *bit_position /**< Optional address if bit addressing
is desired */
);
--- a/lib/domain.c Fri May 13 15:33:16 2011 +0200
+++ b/lib/domain.c Fri May 13 15:34:20 2011 +0200
@@ -52,6 +52,13 @@
// nothing to do
}
+
+/*****************************************************************************/
+unsigned int ecrt_domain_index(ec_domain_t *domain)
+{
+ return domain->index;
+}
+
/*****************************************************************************/
int ecrt_domain_reg_pdo_entry_list(ec_domain_t *domain,
--- a/lib/master.c Fri May 13 15:33:16 2011 +0200
+++ b/lib/master.c Fri May 13 15:34:20 2011 +0200
@@ -1,11 +1,11 @@
/******************************************************************************
- *
+ *
* $Id$
- *
+ *
* Copyright (C) 2006-2009 Florian Pose, Ingenieurgemeinschaft IgH
- *
+ *
* This file is part of the IgH EtherCAT master userspace library.
- *
+ *
* The IgH EtherCAT master userspace library is free software; you can
* redistribute it and/or modify it under the terms of the GNU Lesser General
* Public License as published by the Free Software Foundation; version 2.1
@@ -19,9 +19,9 @@
* You should have received a copy of the GNU Lesser General Public License
* along with the IgH EtherCAT master userspace library. If not, see
* <http://www.gnu.org/licenses/>.
- *
+ *
* ---
- *
+ *
* The license mentioned above concerns the source code only. Using the
* EtherCAT technology and brand is only permitted in compliance with the
* industrial property and similar rights of Beckhoff Automation GmbH.
@@ -118,12 +118,12 @@
fprintf(stderr, "Failed to allocate memory.\n");
return 0;
}
-
+
index = ioctl(master->fd, EC_IOCTL_CREATE_DOMAIN, NULL);
if (index == -1) {
fprintf(stderr, "Failed to create domain: %s\n", strerror(errno));
free(domain);
- return 0;
+ return 0;
}
domain->next = NULL;
@@ -166,17 +166,17 @@
fprintf(stderr, "Failed to allocate memory.\n");
return 0;
}
-
+
data.alias = alias;
data.position = position;
data.vendor_id = vendor_id;
data.product_code = product_code;
-
+
if (ioctl(master->fd, EC_IOCTL_CREATE_SLAVE_CONFIG, &data) == -1) {
fprintf(stderr, "Failed to create slave config: %s\n",
strerror(errno));
free(sc);
- return 0;
+ return 0;
}
sc->next = NULL;
@@ -216,7 +216,7 @@
ec_slave_info_t *slave_info)
{
ec_ioctl_slave_t data;
- int index;
+ int index, i;
data.position = slave_position;
@@ -232,6 +232,15 @@
slave_info->serial_number = data.serial_number;
slave_info->alias = data.alias;
slave_info->current_on_ebus = data.current_on_ebus;
+ for ( i = 0; i < EC_MAX_PORTS; i++ ) {
+ slave_info->ports[i].desc = data.ports[i].desc;
+ slave_info->ports[i].link.link_up = data.ports[i].link.link_up;
+ slave_info->ports[i].link.loop_closed = data.ports[i].link.loop_closed;
+ slave_info->ports[i].link.signal_detected = data.ports[i].link.signal_detected;
+ slave_info->ports[i].receive_time = data.ports[i].receive_time;
+ slave_info->ports[i].next_slave = data.ports[i].next_slave;
+ slave_info->ports[i].delay_to_next_dc = data.ports[i].delay_to_next_dc;
+ }
slave_info->al_state = data.al_state;
slave_info->error_flag = data.error_flag;
slave_info->sync_count = data.sync_count;
@@ -455,7 +464,7 @@
}
// Access the mapped region to cause the initial page fault
- master->process_data[0] = 0x00;
+ memset(master->process_data, 0, master->process_data_size);
}
return 0;
@@ -515,6 +524,16 @@
/*****************************************************************************/
+void ecrt_master_configured_slaves_state(const ec_master_t *master,
+ ec_master_state_t *state)
+{
+ if (ioctl(master->fd, EC_IOCTL_MASTER_SC_STATE, state) == -1) {
+ fprintf(stderr, "Failed to get master state: %s\n", strerror(errno));
+ }
+}
+
+/*****************************************************************************/
+
void ecrt_master_application_time(ec_master_t *master, uint64_t app_time)
{
ec_ioctl_app_time_t data;
--- a/lib/slave_config.c Fri May 13 15:33:16 2011 +0200
+++ b/lib/slave_config.c Fri May 13 15:34:20 2011 +0200
@@ -110,6 +110,23 @@
/*****************************************************************************/
+void ecrt_slave_config_overlapping_pdos(ec_slave_config_t *sc,
+ uint8_t allow_overlapping_pdos)
+{
+ ec_ioctl_config_t data;
+
+ memset(&data, 0x00, sizeof(ec_ioctl_config_t));
+ data.config_index = sc->index;
+ data.allow_overlapping_pdos = allow_overlapping_pdos;
+
+ if (ioctl(sc->master->fd, EC_IOCTL_SC_OVERLAPPING_IO, &data) == -1) {
+ fprintf(stderr, "Failed to config overlapping PDOs: %s\n",
+ strerror(errno));
+ }
+}
+
+/*****************************************************************************/
+
int ecrt_slave_config_pdo_assign_add(ec_slave_config_t *sc,
uint8_t sync_index, uint16_t pdo_index)
{
@@ -415,7 +432,7 @@
if (size) {
req->data = malloc(size);
if (!req->data) {
- fprintf(stderr, "Failed to allocate %u bytes of SDO data"
+ fprintf(stderr, "Failed to allocate %zu bytes of SDO data"
" memory.\n", size);
free(req);
return 0;
@@ -484,7 +501,7 @@
if (size) {
voe->data = malloc(size);
if (!voe->data) {
- fprintf(stderr, "Failed to allocate %u bytes of VoE data"
+ fprintf(stderr, "Failed to allocate %zu bytes of VoE data"
" memory.\n", size);
free(voe);
return 0;
--- a/master/cdev.c Fri May 13 15:33:16 2011 +0200
+++ b/master/cdev.c Fri May 13 15:34:20 2011 +0200
@@ -186,7 +186,7 @@
ec_ioctl_master_t data;
unsigned int i;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
data.slave_count = master->slave_count;
data.config_count = ec_master_config_count(master);
@@ -197,9 +197,9 @@
data.phase = (uint8_t) master->phase;
data.active = (uint8_t) master->active;
data.scan_busy = master->scan_busy;
- up(&master->master_sem);
-
- if (down_interruptible(&master->device_sem))
+ ec_mutex_unlock(&master->master_mutex);
+
+ if (ec_mutex_lock_interruptible(&master->device_mutex))
return -EINTR;
if (master->main_device.dev) {
@@ -242,7 +242,7 @@
data.devices[1].loss_rates[i] = master->backup_device.loss_rates[i];
}
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
data.app_time = master->app_time;
data.ref_clock =
@@ -271,12 +271,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n", data.position);
return -EINVAL;
}
@@ -330,7 +330,7 @@
ec_cdev_strcpy(data.order, slave->sii.order);
ec_cdev_strcpy(data.name, slave->sii.name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -355,19 +355,19 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
}
if (data.sync_index >= slave->sii.sync_count) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Sync manager %u does not exist!\n",
data.sync_index);
return -EINVAL;
@@ -381,7 +381,7 @@
data.enable = sync->enable;
data.pdo_count = ec_pdo_list_count(&sync->pdos);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -407,19 +407,19 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
}
if (data.sync_index >= slave->sii.sync_count) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Sync manager %u does not exist!\n",
data.sync_index);
return -EINVAL;
@@ -428,7 +428,7 @@
sync = &slave->sii.syncs[data.sync_index];
if (!(pdo = ec_pdo_list_find_pdo_by_pos_const(
&sync->pdos, data.pdo_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Sync manager %u does not contain a PDO with "
"position %u!\n", data.sync_index, data.pdo_pos);
return -EINVAL;
@@ -438,7 +438,7 @@
data.entry_count = ec_pdo_entry_count(pdo);
ec_cdev_strcpy(data.name, pdo->name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -465,19 +465,19 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
}
if (data.sync_index >= slave->sii.sync_count) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Sync manager %u does not exist!\n",
data.sync_index);
return -EINVAL;
@@ -486,7 +486,7 @@
sync = &slave->sii.syncs[data.sync_index];
if (!(pdo = ec_pdo_list_find_pdo_by_pos_const(
&sync->pdos, data.pdo_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Sync manager %u does not contain a PDO with "
"position %u!\n", data.sync_index, data.pdo_pos);
return -EINVAL;
@@ -494,7 +494,7 @@
if (!(entry = ec_pdo_find_entry_by_pos_const(
pdo, data.entry_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "PDO 0x%04X does not contain an entry with "
"position %u!\n", data.pdo_pos, data.entry_pos);
return -EINVAL;
@@ -505,7 +505,7 @@
data.bit_length = entry->bit_length;
ec_cdev_strcpy(data.name, entry->name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -529,22 +529,23 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain_const(master, data.index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Domain %u does not exist!\n", data.index);
return -EINVAL;
}
data.data_size = domain->data_size;
+ data.tx_size = domain->tx_size;
data.logical_base_address = domain->logical_base_address;
data.working_counter = domain->working_counter;
data.expected_working_counter = domain->expected_working_counter;
data.fmmu_count = ec_domain_fmmu_count(domain);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -569,18 +570,18 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain_const(master, data.domain_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Domain %u does not exist!\n",
data.domain_index);
return -EINVAL;
}
if (!(fmmu = ec_domain_find_fmmu(domain, data.fmmu_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Domain %u has less than %u"
" fmmu configurations.\n",
data.domain_index, data.fmmu_index + 1);
@@ -592,9 +593,10 @@
data.sync_index = fmmu->sync_index;
data.dir = fmmu->dir;
data.logical_address = fmmu->logical_start_address;
+ data.domain_address = fmmu->domain_address;
data.data_size = fmmu->data_size;
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -618,18 +620,18 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain_const(master, data.domain_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Domain %u does not exist!\n",
data.domain_index);
return -EINVAL;
}
if (domain->data_size != data.data_size) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Data size mismatch %u/%zu!\n",
data.data_size, domain->data_size);
return -EFAULT;
@@ -637,11 +639,11 @@
if (copy_to_user((void __user *) data.target, domain->data,
domain->data_size)) {
- up(&master->master_sem);
- return -EFAULT;
- }
-
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
+ return -EFAULT;
+ }
+
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -686,12 +688,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
@@ -699,7 +701,7 @@
ec_slave_request_state(slave, data.al_state);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -720,12 +722,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
@@ -733,7 +735,7 @@
if (!(sdo = ec_slave_get_sdo_by_pos_const(
slave, data.sdo_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "SDO %u does not exist!\n", data.sdo_position);
return -EINVAL;
}
@@ -742,7 +744,7 @@
data.max_subindex = sdo->max_subindex;
ec_cdev_strcpy(data.name, sdo->name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -768,12 +770,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
@@ -782,14 +784,14 @@
if (data.sdo_spec <= 0) {
if (!(sdo = ec_slave_get_sdo_by_pos_const(
slave, -data.sdo_spec))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "SDO %u does not exist!\n", -data.sdo_spec);
return -EINVAL;
}
} else {
if (!(sdo = ec_slave_get_sdo_const(
slave, data.sdo_spec))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "SDO 0x%04X does not exist!\n",
data.sdo_spec);
return -EINVAL;
@@ -798,7 +800,7 @@
if (!(entry = ec_sdo_get_entry_const(
sdo, data.sdo_entry_subindex))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "SDO entry 0x%04X:%02X does not exist!\n",
sdo->index, data.sdo_entry_subindex);
return -EINVAL;
@@ -820,7 +822,7 @@
entry->write_access[EC_SDO_ENTRY_ACCESS_OP];
ec_cdev_strcpy(data.description, entry->description);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -838,78 +840,74 @@
)
{
ec_ioctl_slave_sdo_upload_t data;
- ec_master_sdo_request_t request;
+ ec_master_sdo_request_t* request;
int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
}
- ec_sdo_request_init(&request.req);
- ec_sdo_request_address(&request.req,
- data.sdo_index, data.sdo_entry_subindex);
- ecrt_sdo_request_read(&request.req);
-
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+
+ ec_sdo_request_init(&request->req);
+ ec_sdo_request_address(&request->req,
+ data.sdo_index, data.sdo_entry_subindex);
+ ecrt_sdo_request_read(&request->req);
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EINTR;
+ }
+ if (!(request->slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
- ec_sdo_request_clear(&request.req);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- return -EINVAL;
- }
-
- EC_SLAVE_DBG(request.slave, 1, "Schedule SDO upload request.\n");
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EINVAL;
+ }
+
+ EC_SLAVE_DBG(request->slave, 1, "Schedule SDO upload request %p.\n",request);
// schedule request.
- list_add_tail(&request.list, &request.slave->slave_sdo_requests);
-
- up(&master->master_sem);
+ kref_get(&request->refcount);
+ list_add_tail(&request->list, &request->slave->slave_sdo_requests);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->sdo_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
+ if (wait_event_interruptible(request->slave->sdo_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
// interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- list_del(&request.list);
- up(&master->master_sem);
- ec_sdo_request_clear(&request.req);
- return -EINTR;
- }
- // request already processing: interrupt not possible.
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->sdo_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
-
- EC_SLAVE_DBG(request.slave, 1, "Finished SDO upload request.\n");
-
- data.abort_code = request.req.abort_code;
-
- if (request.req.state != EC_INT_REQUEST_SUCCESS) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EINTR;
+ }
+
+ EC_SLAVE_DBG(request->slave, 1, "Finished SDO upload request %p.\n",request);
+
+ data.abort_code = request->req.abort_code;
+
+ if (request->req.state != EC_INT_REQUEST_SUCCESS) {
data.data_size = 0;
- if (request.req.errno) {
- retval = -request.req.errno;
+ if (request->req.errno) {
+ retval = -request->req.errno;
} else {
retval = -EIO;
}
} else {
- if (request.req.data_size > data.target_size) {
+ if (request->req.data_size > data.target_size) {
EC_MASTER_ERR(master, "Buffer too small.\n");
- ec_sdo_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return -EOVERFLOW;
}
- data.data_size = request.req.data_size;
+ data.data_size = request->req.data_size;
if (copy_to_user((void __user *) data.target,
- request.req.data, data.data_size)) {
- ec_sdo_request_clear(&request.req);
+ request->req.data, data.data_size)) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return -EFAULT;
}
retval = 0;
@@ -919,7 +917,7 @@
retval = -EFAULT;
}
- ec_sdo_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return retval;
}
@@ -933,7 +931,7 @@
)
{
ec_ioctl_slave_sdo_download_t data;
- ec_master_sdo_request_t request;
+ ec_master_sdo_request_t* request;
int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
@@ -946,67 +944,63 @@
return -EINVAL;
}
- ec_sdo_request_init(&request.req);
- ec_sdo_request_address(&request.req,
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+
+ ec_sdo_request_init(&request->req);
+ ec_sdo_request_address(&request->req,
data.sdo_index, data.sdo_entry_subindex);
- if (ec_sdo_request_alloc(&request.req, data.data_size)) {
- ec_sdo_request_clear(&request.req);
+ if (ec_sdo_request_alloc(&request->req, data.data_size)) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return -ENOMEM;
}
- if (copy_from_user(request.req.data,
+ if (copy_from_user(request->req.data,
(void __user *) data.data, data.data_size)) {
- ec_sdo_request_clear(&request.req);
- return -EFAULT;
- }
- request.req.data_size = data.data_size;
- ecrt_sdo_request_write(&request.req);
-
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EFAULT;
+ }
+ request->req.data_size = data.data_size;
+ ecrt_sdo_request_write(&request->req);
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EINTR;
+ }
+ if (!(request->slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- ec_sdo_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return -EINVAL;
}
- EC_SLAVE_DBG(request.slave, 1, "Schedule SDO download request.\n");
+ EC_SLAVE_DBG(request->slave, 1, "Schedule SDO download request %p.\n",request);
// schedule request.
- list_add_tail(&request.list, &request.slave->slave_sdo_requests);
-
- up(&master->master_sem);
+ kref_get(&request->refcount);
+ list_add_tail(&request->list, &request->slave->slave_sdo_requests);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->sdo_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
+ if (wait_event_interruptible(request->slave->sdo_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
// interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- list_del(&request.list);
- up(&master->master_sem);
- ec_sdo_request_clear(&request.req);
- return -EINTR;
- }
- // request already processing: interrupt not possible.
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->sdo_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
-
- EC_SLAVE_DBG(request.slave, 1, "Finished SDO download request.\n");
-
- data.abort_code = request.req.abort_code;
-
- if (request.req.state == EC_INT_REQUEST_SUCCESS) {
+ kref_put(&request->refcount,ec_master_sdo_request_release);
+ return -EINTR;
+ }
+
+ EC_SLAVE_DBG(request->slave, 1, "Finished SDO download request %p.\n",request);
+
+ data.abort_code = request->req.abort_code;
+
+ if (request->req.state == EC_INT_REQUEST_SUCCESS) {
retval = 0;
- } else if (request.req.errno) {
- retval = -request.req.errno;
+ } else if (request->req.errno) {
+ retval = -request->req.errno;
} else {
retval = -EIO;
}
@@ -1015,7 +1009,7 @@
retval = -EFAULT;
}
- ec_sdo_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_sdo_request_release);
return retval;
}
@@ -1036,12 +1030,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(slave = ec_master_find_slave_const(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
@@ -1049,7 +1043,7 @@
if (!data.nwords
|| data.offset + data.nwords > slave->sii_nwords) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_SLAVE_ERR(slave, "Invalid SII read offset/size %u/%u for slave SII"
" size %zu!\n", data.offset, data.nwords, slave->sii_nwords);
return -EINVAL;
@@ -1061,7 +1055,7 @@
else
retval = 0;
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return retval;
}
@@ -1078,7 +1072,8 @@
ec_slave_t *slave;
unsigned int byte_size;
uint16_t *words;
- ec_sii_write_request_t request;
+ ec_sii_write_request_t* request;
+ int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
@@ -1094,58 +1089,57 @@
return -ENOMEM;
}
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+ // init SII write request
+ INIT_LIST_HEAD(&request->list);
+ request->words = words; // now "owned" by request, see ec_master_sii_write_request_release
+ request->offset = data.offset;
+ request->nwords = data.nwords;
+
if (copy_from_user(words,
(void __user *) data.words, byte_size)) {
- kfree(words);
- return -EFAULT;
- }
-
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
+ return -EFAULT;
+ }
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
+ return -EINTR;
+ }
if (!(slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- kfree(words);
- return -EINVAL;
- }
-
- // init SII write request
- INIT_LIST_HEAD(&request.list);
- request.slave = slave;
- request.words = words;
- request.offset = data.offset;
- request.nwords = data.nwords;
- request.state = EC_INT_REQUEST_QUEUED;
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
+ return -EINVAL;
+ }
+
+ request->slave = slave;
+ request->state = EC_INT_REQUEST_QUEUED;
// schedule SII write request.
- list_add_tail(&request.list, &master->sii_requests);
-
- up(&master->master_sem);
+ list_add_tail(&request->list, &master->sii_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
if (wait_event_interruptible(master->sii_queue,
- request.state != EC_INT_REQUEST_QUEUED)) {
- // interrupted by signal
- down(&master->master_sem);
- if (request.state == EC_INT_REQUEST_QUEUED) {
- // abort request
- list_del(&request.list);
- up(&master->master_sem);
- kfree(words);
- return -EINTR;
- }
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(master->sii_queue, request.state != EC_INT_REQUEST_BUSY);
-
- kfree(words);
-
- return request.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ ((request->state == EC_INT_REQUEST_SUCCESS) || (request->state == EC_INT_REQUEST_FAILURE)))) {
+ // interrupted by signal
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
+ return -EINTR;
+ }
+
+
+ retval = request->state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
+
+ return retval;
}
/*****************************************************************************/
@@ -1160,7 +1154,8 @@
ec_ioctl_slave_reg_t data;
ec_slave_t *slave;
uint8_t *contents;
- ec_reg_request_t request;
+ ec_reg_request_t* request;
+ int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
@@ -1175,56 +1170,58 @@
return -ENOMEM;
}
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+
+ // init register request
+ INIT_LIST_HEAD(&request->list);
+ request->dir = EC_DIR_INPUT;
+ request->data = contents; // now "owned" by request, see ec_master_reg_request_release
+ request->offset = data.offset;
+ request->length = data.length;
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINTR;
+ }
if (!(slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- return -EINVAL;
- }
-
- // init register request
- INIT_LIST_HEAD(&request.list);
- request.slave = slave;
- request.dir = EC_DIR_INPUT;
- request.data = contents;
- request.offset = data.offset;
- request.length = data.length;
- request.state = EC_INT_REQUEST_QUEUED;
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINVAL;
+ }
+
+ request->slave = slave;
+ request->state = EC_INT_REQUEST_QUEUED;
// schedule request.
- list_add_tail(&request.list, &master->reg_requests);
-
- up(&master->master_sem);
+ list_add_tail(&request->list, &master->reg_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
if (wait_event_interruptible(master->reg_queue,
- request.state != EC_INT_REQUEST_QUEUED)) {
- // interrupted by signal
- down(&master->master_sem);
- if (request.state == EC_INT_REQUEST_QUEUED) {
- // abort request
- list_del(&request.list);
- up(&master->master_sem);
- kfree(contents);
- return -EINTR;
+ ((request->state == EC_INT_REQUEST_SUCCESS) || (request->state == EC_INT_REQUEST_FAILURE)))) {
+ // interrupted by signal
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINTR;
+ }
+
+ if (request->state == EC_INT_REQUEST_SUCCESS) {
+ if (copy_to_user((void __user *) data.data, request->data, data.length)) {
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EFAULT;
}
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(master->reg_queue, request.state != EC_INT_REQUEST_BUSY);
-
- if (request.state == EC_INT_REQUEST_SUCCESS) {
- if (copy_to_user((void __user *) data.data, contents, data.length))
- return -EFAULT;
- }
- kfree(contents);
-
- return request.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ }
+ retval = request->state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return retval;
}
/*****************************************************************************/
@@ -1239,7 +1236,8 @@
ec_ioctl_slave_reg_t data;
ec_slave_t *slave;
uint8_t *contents;
- ec_reg_request_t request;
+ ec_reg_request_t* request;
+ int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
@@ -1259,53 +1257,52 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
- return -EINTR;
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+ // init register request
+ INIT_LIST_HEAD(&request->list);
+ request->dir = EC_DIR_OUTPUT;
+ request->data = contents; // now "owned" by request, see ec_master_reg_request_release
+ request->offset = data.offset;
+ request->length = data.length;
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINTR;
+ }
if (!(slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- kfree(contents);
- return -EINVAL;
- }
-
- // init register request
- INIT_LIST_HEAD(&request.list);
- request.slave = slave;
- request.dir = EC_DIR_OUTPUT;
- request.data = contents;
- request.offset = data.offset;
- request.length = data.length;
- request.state = EC_INT_REQUEST_QUEUED;
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINVAL;
+ }
+
+ request->slave = slave;
+ request->state = EC_INT_REQUEST_QUEUED;
// schedule request.
- list_add_tail(&request.list, &master->reg_requests);
-
- up(&master->master_sem);
+ list_add_tail(&request->list, &master->reg_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
if (wait_event_interruptible(master->reg_queue,
- request.state != EC_INT_REQUEST_QUEUED)) {
- // interrupted by signal
- down(&master->master_sem);
- if (request.state == EC_INT_REQUEST_QUEUED) {
- // abort request
- list_del(&request.list);
- up(&master->master_sem);
- kfree(contents);
- return -EINTR;
- }
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(master->reg_queue, request.state != EC_INT_REQUEST_BUSY);
-
- kfree(contents);
-
- return request.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ ((request->state == EC_INT_REQUEST_SUCCESS) || (request->state == EC_INT_REQUEST_FAILURE)))) {
+ // interrupted by signal
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return -EINTR;
+ }
+
+ retval = request->state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ kref_put(&request->refcount,ec_master_reg_request_release);
+ return retval;
+
}
/*****************************************************************************/
@@ -1325,12 +1322,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(
master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave config %u does not exist!\n",
data.config_index);
return -EINVAL;
@@ -1356,7 +1353,7 @@
data.dc_sync[i] = sc->dc_sync[i];
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1387,12 +1384,12 @@
return -EINVAL;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(
master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave config %u does not exist!\n",
data.config_index);
return -EINVAL;
@@ -1401,7 +1398,7 @@
if (!(pdo = ec_pdo_list_find_pdo_by_pos_const(
&sc->sync_configs[data.sync_index].pdos,
data.pdo_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Invalid PDO position!\n");
return -EINVAL;
}
@@ -1410,7 +1407,7 @@
data.entry_count = ec_pdo_entry_count(pdo);
ec_cdev_strcpy(data.name, pdo->name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1442,12 +1439,12 @@
return -EINVAL;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(
master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave config %u does not exist!\n",
data.config_index);
return -EINVAL;
@@ -1456,14 +1453,14 @@
if (!(pdo = ec_pdo_list_find_pdo_by_pos_const(
&sc->sync_configs[data.sync_index].pdos,
data.pdo_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Invalid PDO position!\n");
return -EINVAL;
}
if (!(entry = ec_pdo_find_entry_by_pos_const(
pdo, data.entry_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Entry not found!\n");
return -EINVAL;
}
@@ -1473,7 +1470,7 @@
data.bit_length = entry->bit_length;
ec_cdev_strcpy(data.name, entry->name);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1498,12 +1495,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(
master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave config %u does not exist!\n",
data.config_index);
return -EINVAL;
@@ -1511,7 +1508,7 @@
if (!(req = ec_slave_config_get_sdo_by_pos_const(
sc, data.sdo_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Invalid SDO position!\n");
return -EINVAL;
}
@@ -1522,7 +1519,7 @@
memcpy(&data.data, req->data,
min((u32) data.size, (u32) EC_MAX_SDO_DATA_SIZE));
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1547,12 +1544,12 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(
master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave config %u does not exist!\n",
data.config_index);
return -EINVAL;
@@ -1560,7 +1557,7 @@
if (!(req = ec_slave_config_get_idn_by_pos_const(
sc, data.idn_pos))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Invalid IDN position!\n");
return -EINVAL;
}
@@ -1572,7 +1569,7 @@
memcpy(&data.data, req->data,
min((u32) data.size, (u32) EC_MAX_IDN_DATA_SIZE));
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1598,11 +1595,11 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(eoe = ec_master_get_eoe_handler_const(master, data.eoe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "EoE handler %u does not exist!\n",
data.eoe_index);
return -EINVAL;
@@ -1615,14 +1612,14 @@
}
snprintf(data.name, EC_DATAGRAM_NAME_SIZE, eoe->dev->name);
data.open = eoe->opened;
- data.rx_bytes = eoe->stats.tx_bytes;
+ data.tx_bytes = eoe->stats.tx_bytes;
+ data.tx_rate = eoe->tx_rate;
+ data.rx_bytes = eoe->stats.rx_bytes;
data.rx_rate = eoe->tx_rate;
- data.tx_bytes = eoe->stats.rx_bytes;
- data.tx_rate = eoe->tx_rate;
data.tx_queued_frames = eoe->tx_queued_frames;
data.tx_queue_size = eoe->tx_queue_size;
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1704,7 +1701,7 @@
data.config_index = 0;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
list_for_each_entry(entry, &master->configs, list) {
@@ -1713,7 +1710,7 @@
data.config_index++;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -1742,14 +1739,14 @@
priv->process_data_size = 0;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
list_for_each_entry(domain, &master->domains, list) {
priv->process_data_size += ecrt_domain_size(domain);
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (priv->process_data_size) {
priv->process_data = vmalloc(priv->process_data_size);
@@ -1767,9 +1764,6 @@
}
}
- ecrt_master_callbacks(master, ec_master_internal_send_cb,
- ec_master_internal_receive_cb, master);
-
ret = ecrt_master_activate(master);
if (ret < 0)
return ret;
@@ -1815,10 +1809,10 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
ec_master_set_send_interval(master,send_interval);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -1837,9 +1831,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_send(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
return 0;
}
@@ -1856,9 +1850,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_receive(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
return 0;
}
@@ -1887,6 +1881,29 @@
/*****************************************************************************/
+/** Get the master state of all configured slaves.
+ */
+int ec_cdev_ioctl_master_sc_state(
+ ec_master_t *master, /**< EtherCAT master. */
+ unsigned long arg, /**< ioctl() argument. */
+ ec_cdev_priv_t *priv /**< Private data structure of file handle. */
+ )
+{
+ ec_master_state_t data;
+
+ if (unlikely(!priv->requested))
+ return -EPERM;
+
+ ecrt_master_configured_slaves_state(master, &data);
+
+ if (copy_to_user((void __user *) arg, &data, sizeof(data)))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*****************************************************************************/
+
/** Get the master state.
*/
int ec_cdev_ioctl_app_time(
@@ -1921,9 +1938,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_sync_reference_clock(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
return 0;
}
@@ -1940,9 +1957,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_sync_slave_clocks(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
return 0;
}
@@ -1959,9 +1976,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_sync_monitor_queue(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
return 0;
}
@@ -1980,9 +1997,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
time_diff = ecrt_master_sync_monitor_process(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
if (copy_to_user((void __user *) arg, &time_diff, sizeof(time_diff)))
return -EFAULT;
@@ -2003,9 +2020,9 @@
if (unlikely(!priv->requested))
return -EPERM;
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
ecrt_master_reset(master);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -2034,7 +2051,7 @@
goto out_return;
}
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
ret = -EINTR;
goto out_return;
}
@@ -2055,7 +2072,7 @@
}
out_up:
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
out_return:
return ret;
}
@@ -2084,7 +2101,7 @@
goto out_return;
}
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
ret = -EINTR;
goto out_return;
}
@@ -2098,11 +2115,55 @@
data.watchdog_divider, data.watchdog_intervals);
out_up:
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
out_return:
return ret;
}
+
+/*****************************************************************************/
+
+/** Configure wether a slave allows overlapping PDOs.
+ */
+int ec_cdev_ioctl_sc_allow_overlapping_pdos(
+ ec_master_t *master, /**< EtherCAT master. */
+ unsigned long arg, /**< ioctl() argument. */
+ ec_cdev_priv_t *priv /**< Private data structure of file handle. */
+ )
+{
+ ec_ioctl_config_t data;
+ ec_slave_config_t *sc;
+ int ret = 0;
+
+ if (unlikely(!priv->requested)) {
+ ret = -EPERM;
+ goto out_return;
+ }
+
+ if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
+ ret = -EFAULT;
+ goto out_return;
+ }
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ ret = -EINTR;
+ goto out_return;
+ }
+
+ if (!(sc = ec_master_get_config(master, data.config_index))) {
+ ret = -ENOENT;
+ goto out_up;
+ }
+
+ ecrt_slave_config_overlapping_pdos(sc,
+ data.allow_overlapping_pdos);
+
+out_up:
+ ec_mutex_unlock(&master->master_mutex);
+out_return:
+ return ret;
+}
+
/*****************************************************************************/
/** Add a PDO to the assignment.
@@ -2122,15 +2183,15 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
return ecrt_slave_config_pdo_assign_add(sc, data.sync_index, data.index);
}
@@ -2154,15 +2215,15 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
ecrt_slave_config_pdo_assign_clear(sc, data.sync_index);
return 0;
@@ -2187,15 +2248,15 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
return ecrt_slave_config_pdo_mapping_add(sc, data.pdo_index,
data.entry_index, data.entry_subindex, data.entry_bit_length);
@@ -2220,15 +2281,15 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
ecrt_slave_config_pdo_mapping_clear(sc, data.index);
return 0;
@@ -2255,20 +2316,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(domain = ec_master_find_domain(master, data.domain_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
ret = ecrt_slave_config_reg_pdo_entry(sc, data.entry_index,
data.entry_subindex, domain, &data.bit_position);
@@ -2298,11 +2359,11 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
@@ -2312,7 +2373,7 @@
data.dc_sync[1].cycle_time,
data.dc_sync[1].shift_time);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -2350,18 +2411,18 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
kfree(sdo_data);
return -EINTR;
}
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
kfree(sdo_data);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
if (data.complete_access) {
ret = ecrt_slave_config_complete_sdo(sc,
@@ -2397,12 +2458,12 @@
data.request_index = 0;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
sc = ec_master_get_config(master, data.config_index);
if (!sc) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
@@ -2410,7 +2471,7 @@
data.request_index++;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
req = ecrt_slave_config_create_sdo_request_err(sc, data.sdo_index,
data.sdo_subindex, data.size);
@@ -2446,12 +2507,12 @@
data.voe_index = 0;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
sc = ec_master_get_config(master, data.config_index);
if (!sc) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
@@ -2459,7 +2520,7 @@
data.voe_index++;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
voe = ecrt_slave_config_create_voe_handler_err(sc, data.size);
if (IS_ERR(voe))
@@ -2492,17 +2553,17 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config_const(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
ecrt_slave_config_state(sc, &state);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) data.state, &state, sizeof(state)))
return -EFAULT;
@@ -2543,18 +2604,18 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
kfree(data);
return -EINTR;
}
if (!(sc = ec_master_get_config(master, ioctl.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
kfree(data);
return -ENOENT;
}
- up(&master->master_sem); // FIXME
+ ec_mutex_unlock(&master->master_mutex); // FIXME
ret = ecrt_slave_config_idn(
sc, ioctl.drive_no, ioctl.idn, ioctl.al_state, data, ioctl.size);
@@ -2578,19 +2639,19 @@
if (unlikely(!priv->requested))
return -EPERM;
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
return -EINTR;
}
list_for_each_entry(domain, &master->domains, list) {
if (domain->index == arg) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return offset;
}
offset += ecrt_domain_size(domain);
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
@@ -2609,16 +2670,16 @@
if (unlikely(!priv->requested))
return -EPERM;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain(master, arg))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
ecrt_domain_process(domain);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -2637,16 +2698,16 @@
if (unlikely(!priv->requested))
return -EPERM;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain(master, arg))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
ecrt_domain_queue(domain);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -2671,17 +2732,17 @@
return -EFAULT;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(domain = ec_master_find_domain_const(master, data.domain_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
ecrt_domain_state(domain, &state);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) data.state, &state, sizeof(state)))
return -EFAULT;
@@ -2709,20 +2770,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(req = ec_slave_config_find_sdo_request(sc, data.request_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ecrt_sdo_request_timeout(req, data.timeout);
return 0;
@@ -2748,16 +2809,16 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(req = ec_slave_config_find_sdo_request(sc, data.request_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
@@ -2767,7 +2828,7 @@
else
data.size = 0;
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) arg, &data, sizeof(data)))
return -EFAULT;
@@ -2795,20 +2856,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(req = ec_slave_config_find_sdo_request(sc, data.request_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ecrt_sdo_request_read(req);
return 0;
@@ -2840,20 +2901,20 @@
return -EINVAL;
}
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(req = ec_slave_config_find_sdo_request(sc, data.request_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ret = ec_sdo_request_alloc(req, data.size);
if (ret)
@@ -2887,20 +2948,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(req = ec_slave_config_find_sdo_request(sc, data.request_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) data.data, ecrt_sdo_request_data(req),
ecrt_sdo_request_data_size(req)))
@@ -2937,20 +2998,20 @@
if (get_user(vendor_type, data.vendor_type))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ecrt_voe_handler_send_header(voe, vendor_id, vendor_type);
return 0;
@@ -2978,22 +3039,22 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
ecrt_voe_handler_received_header(voe, &vendor_id, &vendor_type);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (likely(data.vendor_id))
if (put_user(vendor_id, data.vendor_id))
@@ -3026,20 +3087,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ecrt_voe_handler_read(voe);
return 0;
@@ -3065,20 +3126,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
ecrt_voe_handler_read_nosync(voe);
return 0;
@@ -3104,20 +3165,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (data.size) {
if (data.size > ec_voe_handler_mem_size(voe))
@@ -3152,20 +3213,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
data.state = ecrt_voe_handler_execute(voe);
if (data.state == EC_REQUEST_SUCCESS && voe->dir == EC_DIR_INPUT)
@@ -3199,20 +3260,20 @@
if (copy_from_user(&data, (void __user *) arg, sizeof(data)))
return -EFAULT;
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
return -EINTR;
if (!(sc = ec_master_get_config(master, data.config_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
if (!(voe = ec_slave_config_find_voe_handler(sc, data.voe_index))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return -ENOENT;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
if (copy_to_user((void __user *) data.data, ecrt_voe_handler_data(voe),
ecrt_voe_handler_data_size(voe)))
@@ -3231,74 +3292,70 @@
)
{
ec_ioctl_slave_foe_t data;
- ec_master_foe_request_t request;
+ ec_master_foe_request_t* request;
int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
}
- ec_foe_request_init(&request.req, data.file_name);
- ec_foe_request_read(&request.req);
- ec_foe_request_alloc(&request.req, 10000); // FIXME
-
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+
+ ec_foe_request_init(&request->req, data.file_name);
+ ec_foe_request_read(&request->req);
+ ec_foe_request_alloc(&request->req, 10000); // FIXME
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -EINTR;
+ }
+ if (!(request->slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
- ec_foe_request_clear(&request.req);
+ ec_mutex_unlock(&master->master_mutex);
+ kref_put(&request->refcount,ec_master_foe_request_release);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
return -EINVAL;
}
// schedule request.
- list_add_tail(&request.list, &request.slave->foe_requests);
-
- up(&master->master_sem);
-
- EC_SLAVE_DBG(request.slave, 1, "Scheduled FoE read request.\n");
+ list_add_tail(&request->list, &request->slave->foe_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
+
+ EC_SLAVE_DBG(request->slave, 1, "Scheduled FoE read request %p.\n",request);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->foe_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
+ if (wait_event_interruptible(request->slave->foe_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
// interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- list_del(&request.list);
- up(&master->master_sem);
- ec_foe_request_clear(&request.req);
- return -EINTR;
- }
- // request already processing: interrupt not possible.
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->foe_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
-
- data.result = request.req.result;
- data.error_code = request.req.error_code;
-
- EC_SLAVE_DBG(request.slave, 1, "Read %zd bytes via FoE"
- " (result = 0x%x).\n", request.req.data_size, request.req.result);
-
- if (request.req.state != EC_INT_REQUEST_SUCCESS) {
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -EINTR;
+ }
+
+ data.result = request->req.result;
+ data.error_code = request->req.error_code;
+
+ EC_SLAVE_DBG(request->slave, 1, "Read %zd bytes via FoE"
+ " (result = 0x%x).\n", request->req.data_size, request->req.result);
+
+ if (request->req.state != EC_INT_REQUEST_SUCCESS) {
data.data_size = 0;
retval = -EIO;
} else {
- if (request.req.data_size > data.buffer_size) {
+ if (request->req.data_size > data.buffer_size) {
EC_MASTER_ERR(master, "Buffer too small.\n");
- ec_foe_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_foe_request_release);
return -EOVERFLOW;
}
- data.data_size = request.req.data_size;
+ data.data_size = request->req.data_size;
if (copy_to_user((void __user *) data.buffer,
- request.req.buffer, data.data_size)) {
- ec_foe_request_clear(&request.req);
+ request->req.buffer, data.data_size)) {
+ kref_put(&request->refcount,ec_master_foe_request_release);
return -EFAULT;
}
retval = 0;
@@ -3308,9 +3365,8 @@
retval = -EFAULT;
}
- EC_SLAVE_DBG(request.slave, 1, "Finished FoE read request.\n");
-
- ec_foe_request_clear(&request.req);
+ EC_SLAVE_DBG(request->slave, 1, "Finished FoE read request %p.\n",request);
+ kref_put(&request->refcount,ec_master_foe_request_release);
return retval;
}
@@ -3325,79 +3381,73 @@
)
{
ec_ioctl_slave_foe_t data;
- ec_master_foe_request_t request;
+ ec_master_foe_request_t* request;
int retval;
if (copy_from_user(&data, (void __user *) arg, sizeof(data))) {
return -EFAULT;
}
- INIT_LIST_HEAD(&request.list);
-
- ec_foe_request_init(&request.req, data.file_name);
-
- if (ec_foe_request_alloc(&request.req, data.buffer_size)) {
- ec_foe_request_clear(&request.req);
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
return -ENOMEM;
- }
- if (copy_from_user(request.req.buffer,
+ kref_init(&request->refcount);
+
+ INIT_LIST_HEAD(&request->list);
+
+ ec_foe_request_init(&request->req, data.file_name);
+
+ if (ec_foe_request_alloc(&request->req, data.buffer_size)) {
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -ENOMEM;
+ }
+ if (copy_from_user(request->req.buffer,
(void __user *) data.buffer, data.buffer_size)) {
- ec_foe_request_clear(&request.req);
- return -EFAULT;
- }
- request.req.data_size = data.buffer_size;
- ec_foe_request_write(&request.req);
-
- if (down_interruptible(&master->master_sem))
- return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -EFAULT;
+ }
+ request->req.data_size = data.buffer_size;
+ ec_foe_request_write(&request->req);
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
+ return -EINTR;
+
+ if (!(request->slave = ec_master_find_slave(
master, 0, data.slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
data.slave_position);
- ec_foe_request_clear(&request.req);
- return -EINVAL;
- }
-
- EC_SLAVE_DBG(request.slave, 1, "Scheduling FoE write request.\n");
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -EINVAL;
+ }
+
+ EC_SLAVE_DBG(request->slave, 1, "Scheduling FoE write request %p.\n",request);
// schedule FoE write request.
- list_add_tail(&request.list, &request.slave->foe_requests);
-
- up(&master->master_sem);
+ list_add_tail(&request->list, &request->slave->foe_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->foe_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
+ if (wait_event_interruptible(request->slave->foe_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
// interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- // abort request
- list_del(&request.list);
- up(&master->master_sem);
- ec_foe_request_clear(&request.req);
- return -EINTR;
- }
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->foe_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
-
- data.result = request.req.result;
- data.error_code = request.req.error_code;
-
- retval = request.req.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ return -EINTR;
+ }
+
+ data.result = request->req.result;
+ data.error_code = request->req.error_code;
+
+ retval = request->req.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
if (__copy_to_user((void __user *) arg, &data, sizeof(data))) {
retval = -EFAULT;
}
- ec_foe_request_clear(&request.req);
-
- EC_SLAVE_DBG(request.slave, 1, "Finished FoE write request.\n");
+ EC_SLAVE_DBG(request->slave, 1, "Finished FoE write request %p.\n",request);
+ kref_put(&request->refcount,ec_master_foe_request_release);
return retval;
}
@@ -3670,6 +3720,8 @@
return ec_cdev_ioctl_receive(master, arg, priv);
case EC_IOCTL_MASTER_STATE:
return ec_cdev_ioctl_master_state(master, arg, priv);
+ case EC_IOCTL_MASTER_SC_STATE:
+ return ec_cdev_ioctl_master_sc_state(master, arg, priv);
case EC_IOCTL_APP_TIME:
if (!(filp->f_mode & FMODE_WRITE))
return -EPERM;
@@ -3702,6 +3754,10 @@
if (!(filp->f_mode & FMODE_WRITE))
return -EPERM;
return ec_cdev_ioctl_sc_watchdog(master, arg, priv);
+ case EC_IOCTL_SC_OVERLAPPING_IO:
+ if (!(filp->f_mode & FMODE_WRITE))
+ return -EPERM;
+ return ec_cdev_ioctl_sc_allow_overlapping_pdos(master,arg,priv);
case EC_IOCTL_SC_ADD_PDO:
if (!(filp->f_mode & FMODE_WRITE))
return -EPERM;
--- a/master/datagram.c Fri May 13 15:33:16 2011 +0200
+++ b/master/datagram.c Fri May 13 15:34:20 2011 +0200
@@ -87,13 +87,17 @@
*/
void ec_datagram_init(ec_datagram_t *datagram /**< EtherCAT datagram. */)
{
+ INIT_LIST_HEAD(&datagram->list); // mark as unqueued
INIT_LIST_HEAD(&datagram->queue); // mark as unqueued
+ INIT_LIST_HEAD(&datagram->fsm_queue); // mark as unqueued
+ INIT_LIST_HEAD(&datagram->sent); // mark as unqueued
datagram->type = EC_DATAGRAM_NONE;
memset(datagram->address, 0x00, EC_ADDR_LEN);
datagram->data = NULL;
datagram->data_origin = EC_ORIG_INTERNAL;
datagram->mem_size = 0;
datagram->data_size = 0;
+ datagram->domain = NULL;
datagram->index = 0x00;
datagram->working_counter = 0x0000;
datagram->state = EC_DATAGRAM_INIT;
@@ -130,6 +134,9 @@
*/
void ec_datagram_unqueue(ec_datagram_t *datagram /**< EtherCAT datagram. */)
{
+ if (!list_empty(&datagram->fsm_queue)) {
+ list_del_init(&datagram->fsm_queue);
+ }
if (!list_empty(&datagram->queue)) {
list_del_init(&datagram->queue);
}
--- a/master/datagram.h Fri May 13 15:33:16 2011 +0200
+++ b/master/datagram.h Fri May 13 15:34:20 2011 +0200
@@ -86,7 +86,8 @@
*/
typedef struct {
struct list_head list; /**< Needed by domain datagram lists. */
- struct list_head queue; /**< Master datagram queue item. */
+ struct list_head queue; /**< Master datagram send-receive queue item. */
+ struct list_head fsm_queue; /**< Master datagram fsm queue item. */
struct list_head sent; /**< Master list item for sent datagrams. */
ec_datagram_type_t type; /**< Datagram type (APRD, BWR, etc.). */
uint8_t address[EC_ADDR_LEN]; /**< Recipient address. */
@@ -94,6 +95,7 @@
ec_origin_t data_origin; /**< Origin of the \a data memory. */
size_t mem_size; /**< Datagram \a data memory size. */
size_t data_size; /**< Size of the data in \a data. */
+ ec_domain_t *domain; /**< Owning domain (may be null for non-domain datagrams) */
uint8_t index; /**< Index (set by master). */
uint16_t working_counter; /**< Working counter. */
ec_datagram_state_t state; /**< State. */
--- a/master/device.c Fri May 13 15:33:16 2011 +0200
+++ b/master/device.c Fri May 13 15:34:20 2011 +0200
@@ -501,9 +501,9 @@
ec_mac_print(device->dev->dev_addr, str);
EC_MASTER_INFO(master, "Releasing main device %s.\n", str);
- down(&master->device_sem);
+ ec_mutex_lock(&master->device_mutex);
ec_device_detach(device);
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
}
/*****************************************************************************/
--- a/master/domain.c Fri May 13 15:33:16 2011 +0200
+++ b/master/domain.c Fri May 13 15:34:20 2011 +0200
@@ -60,6 +60,7 @@
domain->index = index;
INIT_LIST_HEAD(&domain->fmmu_configs);
domain->data_size = 0;
+ domain->tx_size = 0;
domain->data = NULL;
domain->data_origin = EC_ORIG_INTERNAL;
domain->logical_base_address = 0x00000000;
@@ -113,6 +114,7 @@
fmmu->domain = domain;
domain->data_size += fmmu->data_size;
+ domain->tx_size += fmmu->tx_size;
list_add_tail(&fmmu->list, &domain->fmmu_configs);
EC_MASTER_DBG(domain->master, 1, "Domain %u:"
@@ -179,6 +181,7 @@
ec_datagram_zero(datagram);
list_add_tail(&datagram->list, &domain->datagrams);
+ datagram->domain = domain;
return 0;
}
@@ -238,6 +241,7 @@
list_for_each_entry(fmmu, &domain->fmmu_configs, list) {
// Correct logical FMMU address
fmmu->logical_start_address += base_address;
+ fmmu->domain_address += base_address;
// Increment Input/Output counter to determine datagram types
// and calculate expected working counters
@@ -249,7 +253,7 @@
// If the current FMMU's data do not fit in the current datagram,
// allocate a new one.
- if (datagram_size + fmmu->data_size > EC_MAX_DATA_SIZE) {
+ if (datagram_size + fmmu->tx_size > EC_MAX_DATA_SIZE) {
ret = ec_domain_add_datagram(domain,
domain->logical_base_address + datagram_offset,
datagram_size, domain->data + datagram_offset,
@@ -267,7 +271,7 @@
}
}
- datagram_size += fmmu->data_size;
+ datagram_size += fmmu->tx_size;
}
// Allocate last datagram, if data are left (this is also the case if the
@@ -377,14 +381,14 @@
EC_MASTER_DBG(domain->master, 1, "ecrt_domain_external_memory("
"domain = 0x%p, mem = 0x%p)\n", domain, mem);
- down(&domain->master->master_sem);
+ ec_mutex_lock(&domain->master->master_mutex);
ec_domain_clear_data(domain);
domain->data = mem;
domain->data_origin = EC_ORIG_EXTERNAL;
- up(&domain->master->master_sem);
+ ec_mutex_unlock(&domain->master->master_mutex);
}
/*****************************************************************************/
--- a/master/domain.h Fri May 13 15:33:16 2011 +0200
+++ b/master/domain.h Fri May 13 15:34:20 2011 +0200
@@ -59,6 +59,7 @@
struct list_head fmmu_configs; /**< FMMU configurations contained. */
size_t data_size; /**< Size of the process data. */
+ size_t tx_size; /**< Size of the transmitted data. */
uint8_t *data; /**< Memory for the process data. */
ec_origin_t data_origin; /**< Origin of the \a data memory. */
uint32_t logical_base_address; /**< Logical offset address of the
--- a/master/ethernet.c Fri May 13 15:33:16 2011 +0200
+++ b/master/ethernet.c Fri May 13 15:34:20 2011 +0200
@@ -111,6 +111,7 @@
eoe->slave = slave;
ec_datagram_init(&eoe->datagram);
+ ec_mbox_init(&eoe->mbox,&eoe->datagram);
eoe->queue_datagram = 0;
eoe->state = ec_eoe_state_rx_start;
eoe->opened = 0;
@@ -122,7 +123,7 @@
eoe->tx_queue_size = EC_EOE_TX_QUEUE_SIZE;
eoe->tx_queued_frames = 0;
- sema_init(&eoe->tx_queue_sem, 1);
+ ec_mutex_init(&eoe->tx_queue_mutex);
eoe->tx_frame_number = 0xFF;
memset(&eoe->stats, 0, sizeof(struct net_device_stats));
@@ -220,6 +221,7 @@
free_netdev(eoe->dev);
+ ec_mbox_clear(&eoe->mbox);
ec_datagram_clear(&eoe->datagram);
}
@@ -231,7 +233,7 @@
{
ec_eoe_frame_t *frame, *next;
- down(&eoe->tx_queue_sem);
+ ec_mutex_lock(&eoe->tx_queue_mutex);
list_for_each_entry_safe(frame, next, &eoe->tx_queue, queue) {
list_del(&frame->queue);
@@ -240,7 +242,7 @@
}
eoe->tx_queued_frames = 0;
- up(&eoe->tx_queue_sem);
+ ec_mutex_unlock(&eoe->tx_queue_mutex);
}
/*****************************************************************************/
@@ -294,7 +296,7 @@
printk("\n");
#endif
- data = ec_slave_mbox_prepare_send(eoe->slave, &eoe->datagram,
+ data = ec_slave_mbox_prepare_send(eoe->slave, &eoe->mbox,
0x02, current_size + 4);
if (IS_ERR(data))
return PTR_ERR(data);
@@ -323,7 +325,9 @@
return;
// if the datagram was not sent, or is not yet received, skip this cycle
- if (eoe->queue_datagram || eoe->datagram.state == EC_DATAGRAM_SENT)
+ if (eoe->queue_datagram ||
+ ec_mbox_is_datagram_state(&eoe->mbox,EC_DATAGRAM_QUEUED) ||
+ ec_mbox_is_datagram_state(&eoe->mbox,EC_DATAGRAM_SENT))
return;
// call state function
@@ -348,7 +352,7 @@
void ec_eoe_queue(ec_eoe_t *eoe /**< EoE handler */)
{
if (eoe->queue_datagram) {
- ec_master_queue_datagram_ext(eoe->slave->master, &eoe->datagram);
+ ec_master_mbox_queue_datagrams(eoe->slave->master, &eoe->mbox);
eoe->queue_datagram = 0;
}
}
@@ -394,7 +398,7 @@
return;
}
- ec_slave_mbox_prepare_check(eoe->slave, &eoe->datagram);
+ ec_slave_mbox_prepare_check(eoe->slave, &eoe->mbox);
eoe->queue_datagram = 1;
eoe->state = ec_eoe_state_rx_check;
}
@@ -408,7 +412,7 @@
*/
void ec_eoe_state_rx_check(ec_eoe_t *eoe /**< EoE handler */)
{
- if (eoe->datagram.state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(&eoe->mbox,EC_DATAGRAM_RECEIVED)) {
eoe->stats.rx_errors++;
#if EOE_DEBUG_LEVEL >= 1
EC_SLAVE_WARN(eoe->slave, "Failed to receive mbox"
@@ -418,14 +422,14 @@
return;
}
- if (!ec_slave_mbox_check(&eoe->datagram)) {
+ if (!ec_slave_mbox_check(&eoe->mbox)) {
eoe->rx_idle = 1;
eoe->state = ec_eoe_state_tx_start;
return;
}
eoe->rx_idle = 0;
- ec_slave_mbox_prepare_fetch(eoe->slave, &eoe->datagram);
+ ec_slave_mbox_prepare_fetch(eoe->slave, &eoe->mbox);
eoe->queue_datagram = 1;
eoe->state = ec_eoe_state_rx_fetch;
}
@@ -447,7 +451,7 @@
unsigned int i;
#endif
- if (eoe->datagram.state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(&eoe->mbox,EC_DATAGRAM_RECEIVED)) {
eoe->stats.rx_errors++;
#if EOE_DEBUG_LEVEL >= 1
EC_SLAVE_WARN(eoe->slave, "Failed to receive mbox"
@@ -457,7 +461,7 @@
return;
}
- data = ec_slave_mbox_fetch(eoe->slave, &eoe->datagram,
+ data = ec_slave_mbox_fetch(eoe->slave, &eoe->mbox,
&mbox_prot, &rec_size);
if (IS_ERR(data)) {
eoe->stats.rx_errors++;
@@ -620,10 +624,10 @@
return;
}
- down(&eoe->tx_queue_sem);
+ ec_mutex_lock(&eoe->tx_queue_mutex);
if (!eoe->tx_queued_frames || list_empty(&eoe->tx_queue)) {
- up(&eoe->tx_queue_sem);
+ ec_mutex_unlock(&eoe->tx_queue_mutex);
eoe->tx_idle = 1;
// no data available.
// start a new receive immediately.
@@ -644,7 +648,7 @@
}
eoe->tx_queued_frames--;
- up(&eoe->tx_queue_sem);
+ ec_mutex_unlock(&eoe->tx_queue_mutex);
eoe->tx_idle = 0;
@@ -684,7 +688,7 @@
*/
void ec_eoe_state_tx_sent(ec_eoe_t *eoe /**< EoE handler */)
{
- if (eoe->datagram.state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(&eoe->mbox,EC_DATAGRAM_RECEIVED)) {
if (eoe->tries) {
eoe->tries--; // try again
eoe->queue_datagram = 1;
@@ -700,7 +704,7 @@
return;
}
- if (eoe->datagram.working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(&eoe->mbox,1)) {
if (eoe->tries) {
eoe->tries--; // try again
eoe->queue_datagram = 1;
@@ -812,14 +816,14 @@
frame->skb = skb;
- down(&eoe->tx_queue_sem);
+ ec_mutex_lock(&eoe->tx_queue_mutex);
list_add_tail(&frame->queue, &eoe->tx_queue);
eoe->tx_queued_frames++;
if (eoe->tx_queued_frames == eoe->tx_queue_size) {
netif_stop_queue(dev);
eoe->tx_queue_active = 0;
}
- up(&eoe->tx_queue_sem);
+ ec_mutex_unlock(&eoe->tx_queue_mutex);
#if EOE_DEBUG_LEVEL >= 2
EC_SLAVE_DBG(eoe->slave, 0, "EoE %s TX queued frame"
--- a/master/ethernet.h Fri May 13 15:33:16 2011 +0200
+++ b/master/ethernet.h Fri May 13 15:34:20 2011 +0200
@@ -73,6 +73,7 @@
struct list_head list; /**< list item */
ec_slave_t *slave; /**< pointer to the corresponding slave */
ec_datagram_t datagram; /**< datagram */
+ ec_mailbox_t mbox; /**< mailbox */
unsigned int queue_datagram; /**< the datagram is ready for queuing */
void (*state)(ec_eoe_t *); /**< state function for the state machine */
struct net_device *dev; /**< net_device for virtual ethernet device */
@@ -92,7 +93,7 @@
unsigned int tx_queue_size; /**< Transmit queue size. */
unsigned int tx_queue_active; /**< kernel netif queue started */
unsigned int tx_queued_frames; /**< number of frames in the queue */
- struct semaphore tx_queue_sem; /**< Semaphore for the send queue. */
+ struct ec_mutex_t tx_queue_mutex; /**< Mutex for the send queue. */
ec_eoe_frame_t *tx_frame; /**< current TX frame */
uint8_t tx_frame_number; /**< number of the transmitted frame */
uint8_t tx_fragment_number; /**< number of the fragment */
--- a/master/fmmu_config.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fmmu_config.c Fri May 13 15:34:20 2011 +0200
@@ -43,14 +43,12 @@
/** FMMU configuration constructor.
*
- * Inits an FMMU configuration, sets the logical start address and adds the
- * process data size for the mapped PDOs of the given direction to the domain
- * data size.
+ * Inits an FMMU configuration and the process data size forthe mapped PDOs
+ * of the given direction to the domain data size.
*/
void ec_fmmu_config_init(
ec_fmmu_config_t *fmmu, /**< EtherCAT FMMU configuration. */
ec_slave_config_t *sc, /**< EtherCAT slave configuration. */
- ec_domain_t *domain, /**< EtherCAT domain. */
uint8_t sync_index, /**< Sync manager index to use. */
ec_direction_t dir /**< PDO direction. */
)
@@ -59,14 +57,32 @@
fmmu->sc = sc;
fmmu->sync_index = sync_index;
fmmu->dir = dir;
-
- fmmu->logical_start_address = domain->data_size;
fmmu->data_size = ec_pdo_list_total_size(
&sc->sync_configs[sync_index].pdos);
+}
+
+/*****************************************************************************/
+
+/** Sets FMMU domain
+ *
+ * Sets the logical start address and the size of the transmitted data
+ */
+void ec_fmmu_config_domain(
+ ec_fmmu_config_t *fmmu, /**< EtherCAT FMMU configuration. */
+ ec_domain_t *domain, /**< EtherCAT domain. */
+ uint32_t logical_start_address, /**< FMMU logical start address. */
+ size_t tx_size /**< Size of transmitted data */
+ )
+{
+ fmmu->domain = domain;
+ fmmu->domain_address = domain->data_size;
+ fmmu->logical_start_address = logical_start_address;
+ fmmu->tx_size = tx_size;
ec_domain_add_fmmu_config(domain, fmmu);
}
+
/*****************************************************************************/
/** Initializes an FMMU configuration page.
@@ -79,9 +95,11 @@
uint8_t *data /**> Configuration page memory. */
)
{
- EC_CONFIG_DBG(fmmu->sc, 1, "FMMU: LogAddr 0x%08X, Size %3u,"
+ EC_CONFIG_DBG(fmmu->sc, 1, "FMMU: LogAddr 0x%08X, DomAddr 0x%08X,"
+ " Size %3u, Tx %3u"
" PhysAddr 0x%04X, SM%u, Dir %s\n",
- fmmu->logical_start_address, fmmu->data_size,
+ fmmu->logical_start_address, fmmu->domain_address,
+ fmmu->data_size, fmmu->data_size,
sync->physical_start_address, fmmu->sync_index,
fmmu->dir == EC_DIR_INPUT ? "in" : "out");
--- a/master/fmmu_config.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fmmu_config.h Fri May 13 15:34:20 2011 +0200
@@ -50,13 +50,18 @@
uint8_t sync_index; /**< Index of sync manager to use. */
ec_direction_t dir; /**< FMMU direction. */
uint32_t logical_start_address; /**< Logical start address. */
+ size_t tx_size; /**< Transmitted (bus) size. */
+ uint32_t domain_address; /** Domain start address */
unsigned int data_size; /**< Covered PDO size. */
} ec_fmmu_config_t;
/*****************************************************************************/
void ec_fmmu_config_init(ec_fmmu_config_t *, ec_slave_config_t *,
- ec_domain_t *, uint8_t, ec_direction_t);
+ uint8_t, ec_direction_t);
+
+void ec_fmmu_config_domain(ec_fmmu_config_t *, ec_domain_t *,
+ uint32_t , size_t);
void ec_fmmu_config_page(const ec_fmmu_config_t *, const ec_sync_t *,
uint8_t *);
--- a/master/fsm_coe.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_coe.c Fri May 13 15:34:20 2011 +0200
@@ -168,11 +168,11 @@
*/
void ec_fsm_coe_init(ec_fsm_coe_t *fsm, /**< finite state machine */
- ec_datagram_t *datagram /**< datagram */
+ ec_mailbox_t *mbox /**< mailbox */
)
{
fsm->state = NULL;
- fsm->datagram = datagram;
+ fsm->mbox = mbox;
}
/*****************************************************************************/
@@ -286,7 +286,7 @@
void ec_fsm_coe_dict_start(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
uint8_t *data;
@@ -303,7 +303,7 @@
return;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 8);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 8);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -328,13 +328,14 @@
void ec_fsm_coe_dict_request(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE dictionary"
" request datagram: ");
@@ -342,7 +343,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE dictionary request failed: ");
ec_datagram_print_wc_error(datagram);
@@ -351,7 +352,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_check;
}
@@ -364,20 +365,21 @@
void ec_fsm_coe_dict_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave,"Reception of CoE mailbox check"
" datagram failed: ");
@@ -385,7 +387,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_FSM_COE_DICT_TIMEOUT) {
@@ -395,13 +397,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_response;
}
@@ -415,18 +417,21 @@
void ec_fsm_coe_dict_response(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
uint8_t *data, mbox_prot;
size_t rec_size;
unsigned int sdo_count, i;
uint16_t sdo_index, fragments_left;
ec_sdo_t *sdo;
-
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ bool first_segment;
+ size_t index_list_offset;
+
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE dictionary"
" response datagram: ");
@@ -434,14 +439,14 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE dictionary response failed: ");
ec_datagram_print_wc_error(datagram);
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -456,7 +461,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_check;
return;
@@ -490,7 +495,7 @@
" Retrying...\n");
ec_print_data(data, rec_size);
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_check;
return;
@@ -503,10 +508,13 @@
return;
}
- sdo_count = (rec_size - 8) / 2;
+ first_segment = list_empty(&slave->sdo_dictionary) ? true : false;
+ index_list_offset = first_segment ? 8 : 6;
+
+ sdo_count = (rec_size - index_list_offset) / 2;
for (i = 0; i < sdo_count; i++) {
- sdo_index = EC_READ_U16(data + 8 + i * 2);
+ sdo_index = EC_READ_U16(data + index_list_offset + i * 2);
if (!sdo_index) {
EC_SLAVE_DBG(slave, 1, "SDO dictionary contains index 0x0000.\n");
continue;
@@ -531,7 +539,7 @@
if (EC_READ_U8(data + 2) & 0x80 || fragments_left) {
// more messages waiting. check again.
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_check;
return;
@@ -546,7 +554,7 @@
// fetch SDO descriptions
fsm->sdo = list_entry(slave->sdo_dictionary.next, ec_sdo_t, list);
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 8);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 8);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -571,13 +579,14 @@
void ec_fsm_coe_dict_desc_request(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE SDO"
" description request datagram: ");
@@ -585,7 +594,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE SDO description"
" request failed: ");
@@ -595,7 +604,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_desc_check;
}
@@ -608,20 +617,21 @@
void ec_fsm_coe_dict_desc_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox check"
" datagram failed: ");
@@ -629,7 +639,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_FSM_COE_DICT_TIMEOUT) {
@@ -640,13 +650,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_desc_response;
}
@@ -661,16 +671,17 @@
void ec_fsm_coe_dict_desc_response(ec_fsm_coe_t *fsm
/**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
ec_sdo_t *sdo = fsm->sdo;
uint8_t *data, mbox_prot;
size_t rec_size, name_size;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE SDO description"
" response datagram: ");
@@ -678,7 +689,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE SDO description"
" response failed: ");
@@ -686,7 +697,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -701,7 +712,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_desc_check;
return;
@@ -739,7 +750,7 @@
ec_print_data(data, rec_size);
}
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_desc_check;
return;
@@ -777,7 +788,7 @@
fsm->subindex = 0;
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 10);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 10);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -805,13 +816,14 @@
void ec_fsm_coe_dict_entry_request(ec_fsm_coe_t *fsm
/**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE SDO entry"
" request datagram: ");
@@ -819,7 +831,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE SDO entry request failed: ");
ec_datagram_print_wc_error(datagram);
@@ -828,7 +840,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_entry_check;
}
@@ -842,20 +854,21 @@
void ec_fsm_coe_dict_entry_check(ec_fsm_coe_t *fsm
/**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox check"
" datagram failed: ");
@@ -863,7 +876,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_FSM_COE_DICT_TIMEOUT) {
@@ -874,13 +887,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_entry_response;
}
@@ -895,7 +908,8 @@
void ec_fsm_coe_dict_entry_response(ec_fsm_coe_t *fsm
/**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
ec_sdo_t *sdo = fsm->sdo;
uint8_t *data, mbox_prot;
@@ -903,10 +917,10 @@
ec_sdo_entry_t *entry;
u16 word;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE SDO"
" description response datagram: ");
@@ -914,7 +928,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE SDO description"
" response failed: ");
@@ -922,7 +936,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -937,7 +951,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_entry_check;
return;
@@ -978,7 +992,7 @@
ec_print_data(data, rec_size);
}
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_dict_entry_check;
return;
@@ -1030,7 +1044,7 @@
if (fsm->subindex < sdo->max_subindex) {
fsm->subindex++;
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 10);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 10);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -1053,7 +1067,7 @@
if (fsm->sdo->list.next != &slave->sdo_dictionary) {
fsm->sdo = list_entry(fsm->sdo->list.next, ec_sdo_t, list);
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 8);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 8);
if (IS_ERR(data)) {
fsm->state = ec_fsm_coe_error;
return;
@@ -1083,7 +1097,7 @@
ec_fsm_coe_t *fsm /**< finite state machine */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_sdo_request_t *request = fsm->request;
uint8_t *data;
@@ -1117,7 +1131,7 @@
}
if (request->data_size <= 4) { // use expedited transfer type
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03,
EC_COE_DOWN_REQ_HEADER_SIZE);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
@@ -1159,7 +1173,7 @@
data_size = required_data_size;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03,
data_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
@@ -1208,14 +1222,15 @@
void ec_fsm_coe_down_request(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
unsigned long diff_ms;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE download"
@@ -1226,8 +1241,8 @@
diff_ms = (jiffies - fsm->request->jiffies_sent) * 1000 / HZ;
- if (datagram->working_counter != 1) {
- if (!datagram->working_counter) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
if (diff_ms < fsm->request->response_timeout) {
#if DEBUG_RETRIES
EC_SLAVE_DBG(slave, 1, "Slave did not respond to SDO"
@@ -1256,7 +1271,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_check;
}
@@ -1267,13 +1282,14 @@
*/
void ec_fsm_coe_down_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check"
@@ -1282,7 +1298,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox check"
@@ -1291,7 +1307,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= fsm->request->response_timeout) {
@@ -1303,13 +1319,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_response;
}
@@ -1322,7 +1338,7 @@
ec_fsm_coe_t *fsm /**< finite state machine */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_sdo_request_t *request = fsm->request;
size_t max_segment_size =
@@ -1349,7 +1365,7 @@
+ EC_COE_DOWN_SEG_MIN_DATA_SIZE;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03,
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03,
data_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
@@ -1389,16 +1405,17 @@
void ec_fsm_coe_down_response(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = fsm->mbox->datagram;
ec_slave_t *slave = fsm->slave;
uint8_t *data, mbox_prot;
size_t rec_size;
ec_sdo_request_t *request = fsm->request;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE download"
@@ -1407,7 +1424,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE download response failed: ");
@@ -1415,7 +1432,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -1432,7 +1449,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_check;
return;
@@ -1484,7 +1501,7 @@
ec_print_data(data, rec_size);
}
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_check;
return;
@@ -1506,13 +1523,14 @@
void ec_fsm_coe_down_seg_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check datagram: ");
@@ -1520,7 +1538,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox segment check"
@@ -1529,7 +1547,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= fsm->request->response_timeout) {
@@ -1540,13 +1558,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_seg_response;
}
@@ -1562,16 +1580,17 @@
ec_fsm_coe_t *fsm /**< finite state machine */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
uint8_t *data, mbox_prot;
size_t rec_size;
ec_sdo_request_t *request = fsm->request;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE download response"
@@ -1580,7 +1599,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE download response failed: ");
@@ -1588,7 +1607,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -1605,7 +1624,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_check;
return;
@@ -1655,7 +1674,7 @@
ec_print_data(data, rec_size);
}
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_down_seg_check;
return;
@@ -1686,7 +1705,7 @@
void ec_fsm_coe_up_start(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
ec_sdo_request_t *request = fsm->request;
@@ -1702,7 +1721,7 @@
return;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, 0x03, 10);
+ data = ec_slave_mbox_prepare_send(slave, mbox, 0x03, 10);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -1734,14 +1753,15 @@
void ec_fsm_coe_up_request(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
unsigned long diff_ms;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE upload request: ");
@@ -1751,8 +1771,8 @@
diff_ms = (jiffies - fsm->request->jiffies_sent) * 1000 / HZ;
- if (datagram->working_counter != 1) {
- if (!datagram->working_counter) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
if (diff_ms < fsm->request->response_timeout) {
#if DEBUG_RETRIES
EC_SLAVE_DBG(slave, 1, "Slave did not respond to"
@@ -1781,7 +1801,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_check;
}
@@ -1794,13 +1814,14 @@
void ec_fsm_coe_up_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check datagram: ");
@@ -1808,7 +1829,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox check"
@@ -1817,7 +1838,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= fsm->request->response_timeout) {
@@ -1829,13 +1850,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_response;
}
@@ -1849,7 +1870,7 @@
)
{
uint8_t *data =
- ec_slave_mbox_prepare_send(fsm->slave, fsm->datagram, 0x03, 10);
+ ec_slave_mbox_prepare_send(fsm->slave, fsm->mbox, 0x03, 10);
if (IS_ERR(data)) {
fsm->request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -1876,7 +1897,8 @@
void ec_fsm_coe_up_response(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
uint16_t rec_index;
@@ -1886,10 +1908,10 @@
unsigned int expedited, size_specified;
int ret;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE upload response"
@@ -1898,7 +1920,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE upload response failed: ");
@@ -1906,7 +1928,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -1928,7 +1950,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_check;
return;
@@ -1979,7 +2001,7 @@
ec_print_data(data, rec_size);
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_check;
return;
@@ -2075,13 +2097,14 @@
void ec_fsm_coe_up_seg_request(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE upload segment"
@@ -2090,7 +2113,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE upload segment"
@@ -2101,7 +2124,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_seg_check;
}
@@ -2114,13 +2137,14 @@
void ec_fsm_coe_up_seg_check(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE mailbox check"
@@ -2129,7 +2153,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE mailbox check datagram"
@@ -2138,7 +2162,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= fsm->request->response_timeout) {
@@ -2149,13 +2173,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_seg_response;
}
@@ -2169,7 +2193,8 @@
void ec_fsm_coe_up_seg_response(ec_fsm_coe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
uint8_t *data, mbox_prot;
@@ -2177,10 +2202,10 @@
ec_sdo_request_t *request = fsm->request;
unsigned int last_segment;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Failed to receive CoE upload segment"
@@ -2189,7 +2214,7 @@
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
request->errno = EIO;
fsm->state = ec_fsm_coe_error;
EC_SLAVE_ERR(slave, "Reception of CoE upload segment"
@@ -2198,7 +2223,7 @@
return;
}
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
request->errno = PTR_ERR(data);
fsm->state = ec_fsm_coe_error;
@@ -2220,7 +2245,7 @@
if (ec_fsm_coe_check_emergency(fsm, data, rec_size)) {
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_seg_check;
return;
@@ -2253,7 +2278,7 @@
ec_print_data(data, rec_size);
}
// check for CoE response again
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_coe_up_seg_check;
return;
--- a/master/fsm_coe.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_coe.h Fri May 13 15:34:20 2011 +0200
@@ -39,6 +39,7 @@
#include "globals.h"
#include "datagram.h"
+#include "mailbox.h"
#include "slave.h"
#include "sdo.h"
#include "sdo_request.h"
@@ -51,7 +52,7 @@
*/
struct ec_fsm_coe {
ec_slave_t *slave; /**< slave the FSM runs on */
- ec_datagram_t *datagram; /**< datagram used in the state machine */
+ ec_mailbox_t *mbox; /**< mailbox used in the state machine */
unsigned int retries; /**< retries upon datagram timeout */
void (*state)(ec_fsm_coe_t *); /**< CoE state function */
@@ -67,7 +68,7 @@
/*****************************************************************************/
-void ec_fsm_coe_init(ec_fsm_coe_t *, ec_datagram_t *);
+void ec_fsm_coe_init(ec_fsm_coe_t *, ec_mailbox_t *);
void ec_fsm_coe_clear(ec_fsm_coe_t *);
void ec_fsm_coe_dictionary(ec_fsm_coe_t *, ec_slave_t *);
--- a/master/fsm_foe.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_foe.c Fri May 13 15:34:20 2011 +0200
@@ -107,11 +107,11 @@
/** Constructor.
*/
void ec_fsm_foe_init(ec_fsm_foe_t *fsm, /**< finite state machine */
- ec_datagram_t *datagram /**< datagram */
+ ec_mailbox_t *mbox /**< mailbox */
)
{
- fsm->state = NULL;
- fsm->datagram = datagram;
+ fsm->state = NULL;
+ fsm->mbox = mbox;
}
/*****************************************************************************/
@@ -207,7 +207,7 @@
}
data = ec_slave_mbox_prepare_send(fsm->slave,
- fsm->datagram, EC_MBOX_TYPE_FILEACCESS,
+ fsm->mbox,EC_MBOX_TYPE_FILEACCESS,
current_size + EC_FOE_HEADER_SIZE);
if (IS_ERR(data))
return -1;
@@ -238,7 +238,7 @@
current_size = fsm->tx_filename_len;
- data = ec_slave_mbox_prepare_send(fsm->slave, fsm->datagram,
+ data = ec_slave_mbox_prepare_send(fsm->slave, fsm->mbox,
EC_MBOX_TYPE_FILEACCESS, current_size + EC_FOE_HEADER_SIZE);
if (IS_ERR(data))
return -1;
@@ -308,21 +308,22 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_fsm_foe_ack_check()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to receive FoE mailbox check datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
// slave did not put anything in the mailbox yet
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE mailbox check datagram"
@@ -331,7 +332,7 @@
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_FSM_FOE_TIMEOUT) {
@@ -340,13 +341,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_foe_state_ack_read;
@@ -360,7 +361,8 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
uint8_t *data, mbox_prot;
uint8_t opCode;
@@ -370,21 +372,21 @@
printk("ec_fsm_foe_ack_read()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to receive FoE ack response datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE ack response failed: ");
ec_datagram_print_wc_error(datagram);
return;
}
- if (!(data = ec_slave_mbox_fetch(fsm->slave, datagram,
+ if (!(data = ec_slave_mbox_fetch(fsm->slave, fsm->mbox,
&mbox_prot, &rec_size))) {
ec_foe_set_tx_error(fsm, FOE_PROT_ERROR);
return;
@@ -440,21 +442,22 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_foe_state_sent_wrq()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to send FoE WRQ: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
// slave did not put anything in the mailbox yet
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE WRQ failed: ");
@@ -464,7 +467,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(fsm->slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(fsm->slave, fsm->mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_foe_state_ack_check;
@@ -481,28 +484,29 @@
ec_fsm_foe_t *fsm /**< Foe statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_fsm_foe_state_data_sent()\n");
#endif
- if (fsm->datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_tx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to receive FoE ack response datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (fsm->datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
ec_foe_set_tx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE data send failed: ");
ec_datagram_print_wc_error(datagram);
return;
}
- ec_slave_mbox_prepare_check(fsm->slave, fsm->datagram);
+ ec_slave_mbox_prepare_check(slave, mbox);
fsm->jiffies_start = jiffies;
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_foe_state_ack_check;
@@ -519,7 +523,7 @@
current_size = fsm->rx_filename_len;
- data = ec_slave_mbox_prepare_send(fsm->slave, fsm->datagram,
+ data = ec_slave_mbox_prepare_send(fsm->slave, fsm->mbox,
EC_MBOX_TYPE_FILEACCESS, current_size + EC_FOE_HEADER_SIZE);
if (IS_ERR(data))
return -1;
@@ -546,7 +550,7 @@
{
uint8_t *data;
- data = ec_slave_mbox_prepare_send(foe->slave, foe->datagram,
+ data = ec_slave_mbox_prepare_send(foe->slave, foe->mbox,
EC_MBOX_TYPE_FILEACCESS, EC_FOE_HEADER_SIZE);
if (IS_ERR(data))
return -1;
@@ -568,21 +572,22 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_foe_state_rrq_sent()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to send FoE RRQ: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
// slave did not put anything in the mailbox yet
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE RRQ failed: ");
@@ -592,7 +597,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(fsm->slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(fsm->slave, fsm->mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_foe_state_data_check;
@@ -657,28 +662,29 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_fsm_foe_state_data_check()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to send FoE DATA READ: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE DATA READ: ");
ec_datagram_print_wc_error(datagram);
return;
}
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
(datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_FSM_FOE_TIMEOUT) {
@@ -687,13 +693,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_foe_state_data_read;
@@ -711,28 +717,29 @@
size_t rec_size;
uint8_t *data, opCode, packet_no, mbox_prot;
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_fsm_foe_state_data_read()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to receive FoE DATA READ datagram: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE DATA READ failed: ");
ec_datagram_print_wc_error(datagram);
return;
}
- if (!(data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size))) {
+ if (!(data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size))) {
ec_foe_set_rx_error(fsm, FOE_MBOX_FETCH_ERROR);
return;
}
@@ -831,21 +838,22 @@
ec_fsm_foe_t *fsm /**< FoE statemachine. */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_datagram_t *datagram = mbox->datagram;
ec_slave_t *slave = fsm->slave;
#ifdef DEBUG_FOE
printk("ec_foe_state_sent_ack()\n");
#endif
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
ec_foe_set_rx_error(fsm, FOE_RECEIVE_ERROR);
EC_SLAVE_ERR(slave, "Failed to send FoE ACK: ");
ec_datagram_print_state(datagram);
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
// slave did not put anything into the mailbox yet
ec_foe_set_rx_error(fsm, FOE_WC_ERROR);
EC_SLAVE_ERR(slave, "Reception of FoE ACK failed: ");
@@ -855,7 +863,7 @@
fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(fsm->slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(fsm->slave, fsm->mbox); // can not fail.
if (fsm->rx_last_packet) {
fsm->rx_expected_packet_no = 0;
--- a/master/fsm_foe.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_foe.h Fri May 13 15:34:20 2011 +0200
@@ -51,7 +51,7 @@
*/
struct ec_fsm_foe {
ec_slave_t *slave; /**< slave the FSM runs on */
- ec_datagram_t *datagram; /**< datagram used in the state machine */
+ ec_mailbox_t *mbox; /**< mailbox used in the state machine */
unsigned int retries; /**< retries upon datagram timeout */
void (*state)(ec_fsm_foe_t *); /**< FoE state function */
@@ -80,7 +80,7 @@
/*****************************************************************************/
-void ec_fsm_foe_init(ec_fsm_foe_t *, ec_datagram_t *);
+void ec_fsm_foe_init(ec_fsm_foe_t *, ec_mailbox_t *);
void ec_fsm_foe_clear(ec_fsm_foe_t *);
int ec_fsm_foe_exec(ec_fsm_foe_t *);
--- a/master/fsm_master.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_master.c Fri May 13 15:34:20 2011 +0200
@@ -48,7 +48,11 @@
/** Time difference [ns] to tolerate without setting a new system time offset.
*/
+#ifdef EC_HAVE_CYCLES
+#define EC_SYSTEM_TIME_TOLERANCE_NS 10000
+#else
#define EC_SYSTEM_TIME_TOLERANCE_NS 100000000
+#endif
/*****************************************************************************/
@@ -81,6 +85,7 @@
{
fsm->master = master;
fsm->datagram = datagram;
+ fsm->mbox = &master->fsm_mbox;
fsm->state = ec_fsm_master_state_start;
fsm->idle = 0;
fsm->link_state = 0;
@@ -89,7 +94,7 @@
fsm->slave_states = EC_SLAVE_STATE_UNKNOWN;
// init sub-state-machines
- ec_fsm_coe_init(&fsm->fsm_coe, fsm->datagram);
+ ec_fsm_coe_init(&fsm->fsm_coe, fsm->mbox);
ec_fsm_pdo_init(&fsm->fsm_pdo, &fsm->fsm_coe);
ec_fsm_change_init(&fsm->fsm_change, fsm->datagram);
ec_fsm_slave_config_init(&fsm->fsm_slave_config, fsm->datagram,
@@ -129,12 +134,11 @@
ec_fsm_master_t *fsm /**< Master state machine. */
)
{
- if (fsm->datagram->state == EC_DATAGRAM_SENT
- || fsm->datagram->state == EC_DATAGRAM_QUEUED) {
+ if (ec_mbox_is_datagram_state(fsm->mbox,EC_DATAGRAM_QUEUED)
+ || ec_mbox_is_datagram_state(fsm->mbox,EC_DATAGRAM_SENT)) {
// datagram was not sent or received yet.
return 0;
}
-
fsm->state(fsm);
return 1;
}
@@ -211,10 +215,6 @@
EC_MASTER_DBG(master, 1, "Master state machine detected "
"link down. Clearing slave list.\n");
-#ifdef EC_EOE
- ec_master_eoe_stop(master);
- ec_master_clear_eoe_handlers(master);
-#endif
ec_master_clear_slaves(master);
fsm->slave_states = 0x00;
}
@@ -238,12 +238,12 @@
}
if (fsm->rescan_required) {
- down(&master->scan_sem);
+ ec_mutex_lock(&master->scan_mutex);
if (!master->allow_scan) {
- up(&master->scan_sem);
+ ec_mutex_unlock(&master->scan_mutex);
} else {
master->scan_busy = 1;
- up(&master->scan_sem);
+ ec_mutex_unlock(&master->scan_mutex);
// clear all slaves and scan the bus
fsm->rescan_required = 0;
@@ -251,7 +251,6 @@
fsm->scan_jiffies = jiffies;
#ifdef EC_EOE
- ec_master_eoe_stop(master);
ec_master_clear_eoe_handlers(master);
#endif
ec_master_clear_slaves(master);
@@ -392,6 +391,7 @@
"datagram size (%zu)!\n", request->length,
fsm->datagram->mem_size);
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_reg_request_release);
wake_up(&master->reg_queue);
continue;
}
@@ -571,12 +571,12 @@
|| slave->force_config) && !slave->error_flag) {
// Start slave configuration, if it is allowed.
- down(&master->config_sem);
+ ec_mutex_lock(&master->config_mutex);
if (!master->allow_config) {
- up(&master->config_sem);
+ ec_mutex_unlock(&master->config_mutex);
} else {
master->config_busy = 1;
- up(&master->config_sem);
+ ec_mutex_unlock(&master->config_mutex);
if (master->debug_level) {
char old_state[EC_STATE_STRING_SIZE],
@@ -802,11 +802,6 @@
// Attach slave configurations
ec_master_attach_slave_configs(master);
-#ifdef EC_EOE
- // check if EoE processing has to be started
- ec_master_eoe_start(master);
-#endif
-
if (master->slave_count) {
fsm->slave = master->slaves; // begin with first slave
ec_fsm_master_enter_write_system_times(fsm);
@@ -889,26 +884,27 @@
ec_fsm_master_t *fsm, /**< Master state machine. */
u64 system_time, /**< System time register. */
u64 old_offset, /**< Time offset register. */
- unsigned long jiffies_since_read /**< Jiffies for correction. */
+ u64 correction /**< Correction. */
)
{
ec_slave_t *slave = fsm->slave;
- u32 correction, system_time32, old_offset32, new_offset;
+ u32 correction32, system_time32, old_offset32, new_offset;
s32 time_diff;
- system_time32 = (u32) system_time;
- old_offset32 = (u32) old_offset;
-
- // correct read system time by elapsed time since read operation
- correction = jiffies_since_read * 1000 / HZ * 1000000;
- system_time32 += correction;
- time_diff = (u32) slave->master->app_time - system_time32;
+ system_time32 = (u32) system_time;
+ // correct read system time by elapsed time between read operation
+ // and app_time set time
+ correction32 = (u32)correction;
+ system_time32 -= correction32;
+ old_offset32 = (u32) old_offset;
+
+ time_diff = (u32) slave->master->app_start_time - system_time32;
EC_SLAVE_DBG(slave, 1, "DC system time offset calculation:"
" system_time=%u (corrected with %u),"
- " app_time=%llu, diff=%i\n",
- system_time32, correction,
- slave->master->app_time, time_diff);
+ " app_start_time=%llu, diff=%i\n",
+ system_time32, correction32,
+ slave->master->app_start_time, time_diff);
if (EC_ABS(time_diff) > EC_SYSTEM_TIME_TOLERANCE_NS) {
new_offset = time_diff + old_offset32;
@@ -929,23 +925,23 @@
ec_fsm_master_t *fsm, /**< Master state machine. */
u64 system_time, /**< System time register. */
u64 old_offset, /**< Time offset register. */
- unsigned long jiffies_since_read /**< Jiffies for correction. */
+ u64 correction /**< Correction. */
)
{
ec_slave_t *slave = fsm->slave;
- u64 new_offset, correction;
+ u64 new_offset;
s64 time_diff;
- // correct read system time by elapsed time since read operation
- correction = (u64) (jiffies_since_read * 1000 / HZ) * 1000000;
- system_time += correction;
- time_diff = fsm->slave->master->app_time - system_time;
+ // correct read system time by elapsed time between read operation
+ // and app_time set time
+ system_time -= correction;
+ time_diff = fsm->slave->master->app_start_time - system_time;
EC_SLAVE_DBG(slave, 1, "DC system time offset calculation:"
" system_time=%llu (corrected with %llu),"
- " app_time=%llu, diff=%lli\n",
+ " app_start_time=%llu, diff=%lli\n",
system_time, correction,
- slave->master->app_time, time_diff);
+ slave->master->app_start_time, time_diff);
if (EC_ABS(time_diff) > EC_SYSTEM_TIME_TOLERANCE_NS) {
new_offset = time_diff + old_offset;
@@ -969,8 +965,7 @@
{
ec_datagram_t *datagram = fsm->datagram;
ec_slave_t *slave = fsm->slave;
- u64 system_time, old_offset, new_offset;
- unsigned long jiffies_since_read;
+ u64 system_time, old_offset, new_offset, correction;
if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
return;
@@ -993,14 +988,25 @@
system_time = EC_READ_U64(datagram->data); // 0x0910
old_offset = EC_READ_U64(datagram->data + 16); // 0x0920
- jiffies_since_read = jiffies - datagram->jiffies_sent;
+ /* correct read system time by elapsed time since read operation
+ and the app_time set time */
+#ifdef EC_HAVE_CYCLES
+ correction =
+ (datagram->cycles_sent - slave->master->dc_cycles_app_start_time)
+ * 1000000LL;
+ do_div(correction,cpu_khz);
+#else
+ correction =
+ (u64) ((datagram->jiffies_sent-slave->master->dc_jiffies_app_start_time) * 1000 / HZ)
+ * 1000000;
+#endif
if (slave->base_dc_range == EC_DC_32) {
new_offset = ec_fsm_master_dc_offset32(fsm,
- system_time, old_offset, jiffies_since_read);
+ system_time, old_offset, correction);
} else {
new_offset = ec_fsm_master_dc_offset64(fsm,
- system_time, old_offset, jiffies_since_read);
+ system_time, old_offset, correction);
}
// set DC system time offset and transmission delay
@@ -1063,6 +1069,7 @@
if (!ec_fsm_sii_success(&fsm->fsm_sii)) {
EC_SLAVE_ERR(slave, "Failed to write SII data.\n");
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
wake_up(&master->sii_queue);
ec_fsm_master_restart(fsm);
return;
@@ -1091,6 +1098,7 @@
// TODO: Evaluate other SII contents!
request->state = EC_INT_REQUEST_SUCCESS;
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
wake_up(&master->sii_queue);
// check for another SII write request
@@ -1184,6 +1192,7 @@
" request datagram: ");
ec_datagram_print_state(datagram);
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_reg_request_release);
wake_up(&master->reg_queue);
ec_fsm_master_restart(fsm);
return;
@@ -1198,6 +1207,7 @@
EC_MASTER_ERR(master, "Failed to allocate %zu bytes"
" of memory for register data.\n", request->length);
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_reg_request_release);
wake_up(&master->reg_queue);
ec_fsm_master_restart(fsm);
return;
@@ -1212,6 +1222,7 @@
EC_MASTER_ERR(master, "Register request failed.\n");
}
+ kref_put(&request->refcount,ec_master_reg_request_release);
wake_up(&master->reg_queue);
// check for another register request
@@ -1222,3 +1233,72 @@
}
/*****************************************************************************/
+
+/** called by kref_put if the SII write request's refcount becomes zero.
+ *
+ */
+void ec_master_sii_write_request_release(struct kref *ref)
+{
+ ec_sii_write_request_t *request = container_of(ref, ec_sii_write_request_t, refcount);
+ if (request->slave)
+ EC_SLAVE_DBG(request->slave, 1, "Releasing SII write request %p.\n",request);
+ kfree(request->words);
+ kfree(request);
+}
+
+/*****************************************************************************/
+
+/** called by kref_put if the reg request's refcount becomes zero.
+ *
+ */
+void ec_master_reg_request_release(struct kref *ref)
+{
+ ec_reg_request_t *request = container_of(ref, ec_reg_request_t, refcount);
+ if (request->slave)
+ EC_SLAVE_DBG(request->slave, 1, "Releasing reg request %p.\n",request);
+ if (request->data)
+ kfree(request->data);
+ kfree(request);
+}
+
+/*****************************************************************************/
+
+/** called by kref_put if the SDO request's refcount becomes zero.
+ *
+ */
+void ec_master_sdo_request_release(struct kref *ref)
+{
+ ec_master_sdo_request_t *request = container_of(ref, ec_master_sdo_request_t, refcount);
+ if (request->slave)
+ EC_SLAVE_DBG(request->slave, 1, "Releasing SDO request %p.\n",request);
+ ec_sdo_request_clear(&request->req);
+ kfree(request);
+}
+
+/*****************************************************************************/
+
+/** called by kref_put if the FoE request's refcount becomes zero.
+ *
+ */
+void ec_master_foe_request_release(struct kref *ref)
+{
+ ec_master_foe_request_t *request = container_of(ref, ec_master_foe_request_t, refcount);
+ if (request->slave)
+ EC_SLAVE_DBG(request->slave, 1, "Releasing FoE request %p.\n",request);
+ ec_foe_request_clear(&request->req);
+ kfree(request);
+}
+
+/*****************************************************************************/
+
+/** called by kref_put if the SoE request's refcount becomes zero.
+ *
+ */
+void ec_master_soe_request_release(struct kref *ref)
+{
+ ec_master_soe_request_t *request = container_of(ref, ec_master_soe_request_t, refcount);
+ if (request->slave)
+ EC_SLAVE_DBG(request->slave, 1, "Releasing SoE request %p.\n",request);
+ ec_soe_request_clear(&request->req);
+ kfree(request);
+}
--- a/master/fsm_master.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_master.h Fri May 13 15:34:20 2011 +0200
@@ -39,6 +39,7 @@
#include "globals.h"
#include "datagram.h"
+#include "mailbox.h"
#include "foe_request.h"
#include "sdo_request.h"
#include "soe_request.h"
@@ -57,8 +58,11 @@
size_t nwords; /**< Number of words. */
const uint16_t *words; /**< Pointer to the data words. */
ec_internal_request_state_t state; /**< State of the request. */
+ struct kref refcount;
} ec_sii_write_request_t;
+void ec_master_sii_write_request_release(struct kref *);
+
/*****************************************************************************/
/** Register request.
@@ -71,8 +75,11 @@
size_t length; /**< Number of bytes. */
uint8_t *data; /**< Data to write / memory for read data. */
ec_internal_request_state_t state; /**< State of the request. */
+ struct kref refcount;
} ec_reg_request_t;
+void ec_master_reg_request_release(struct kref *);
+
/*****************************************************************************/
/** Slave/SDO request record for master's SDO request list.
@@ -81,8 +88,11 @@
struct list_head list; /**< List element. */
ec_slave_t *slave; /**< Slave. */
ec_sdo_request_t req; /**< SDO request. */
+ struct kref refcount;
} ec_master_sdo_request_t;
+void ec_master_sdo_request_release(struct kref *);
+
/*****************************************************************************/
/** FoE request.
@@ -91,8 +101,11 @@
struct list_head list; /**< List head. */
ec_slave_t *slave; /**< EtherCAT slave. */
ec_foe_request_t req; /**< FoE request. */
+ struct kref refcount;
} ec_master_foe_request_t;
+void ec_master_foe_request_release(struct kref *);
+
/*****************************************************************************/
/** SoE request.
@@ -101,8 +114,11 @@
struct list_head list; /**< List head. */
ec_slave_t *slave; /**< EtherCAT slave. */
ec_soe_request_t req; /**< SoE request. */
+ struct kref refcount;
} ec_master_soe_request_t;
+void ec_master_soe_request_release(struct kref *);
+
/*****************************************************************************/
typedef struct ec_fsm_master ec_fsm_master_t; /**< \see ec_fsm_master */
@@ -112,6 +128,7 @@
struct ec_fsm_master {
ec_master_t *master; /**< master the FSM runs on */
ec_datagram_t *datagram; /**< datagram used in the state machine */
+ ec_mailbox_t* mbox; /**< mailbox used in the CoE state machine */
unsigned int retries; /**< retries on datagram timeout. */
void (*state)(ec_fsm_master_t *); /**< master state function */
--- a/master/fsm_slave.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_slave.c Fri May 13 15:34:20 2011 +0200
@@ -57,21 +57,21 @@
void ec_fsm_slave_init(
ec_fsm_slave_t *fsm, /**< Slave state machine. */
ec_slave_t *slave, /**< EtherCAT slave. */
- ec_datagram_t *datagram /**< Datagram object to use. */
+ ec_mailbox_t *mbox/**< Datagram object to use. */
)
{
fsm->slave = slave;
- fsm->datagram = datagram;
- fsm->datagram->data_size = 0;
+ fsm->mbox = mbox;
+ slave->datagram.data_size = 0;
EC_SLAVE_DBG(slave, 1, "Init FSM.\n");
fsm->state = ec_fsm_slave_state_idle;
// init sub-state-machines
- ec_fsm_coe_init(&fsm->fsm_coe, fsm->datagram);
- ec_fsm_foe_init(&fsm->fsm_foe, fsm->datagram);
- ec_fsm_soe_init(&fsm->fsm_soe, fsm->datagram);
+ ec_fsm_coe_init(&fsm->fsm_coe, fsm->mbox);
+ ec_fsm_foe_init(&fsm->fsm_foe, fsm->mbox);
+ ec_fsm_soe_init(&fsm->fsm_soe, fsm->mbox);
}
/*****************************************************************************/
@@ -94,19 +94,21 @@
*
* If the state machine's datagram is not sent or received yet, the execution
* of the state machine is delayed to the next cycle.
- */
-void ec_fsm_slave_exec(
- ec_fsm_slave_t *fsm /**< Slave state machine. */
- )
-{
- if (fsm->datagram->state == EC_DATAGRAM_SENT
- || fsm->datagram->state == EC_DATAGRAM_QUEUED) {
+ *
+ * \return true, if the state machine was executed
+ */
+int ec_fsm_slave_exec(
+ ec_fsm_slave_t *fsm /**< Slave state machine. */
+ )
+{
+ if (ec_mbox_is_datagram_state(fsm->mbox,EC_DATAGRAM_QUEUED)
+ || ec_mbox_is_datagram_state(fsm->mbox,EC_DATAGRAM_SENT)) {
// datagram was not sent or received yet.
- return;
+ return 0;
}
fsm->state(fsm);
- return;
+ return 1;
}
/*****************************************************************************/
@@ -176,9 +178,10 @@
list_del_init(&request->list); // dequeue
if (slave->current_state & EC_SLAVE_STATE_ACK_ERR) {
- EC_SLAVE_WARN(slave, "Aborting SDO request,"
- " slave has error flag set.\n");
+ EC_SLAVE_WARN(slave, "Aborting SDO request %p,"
+ " slave has error flag set.\n",request);
request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sdo_request_release);
wake_up(&slave->sdo_queue);
fsm->sdo_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
@@ -186,8 +189,9 @@
}
if (slave->current_state == EC_SLAVE_STATE_INIT) {
- EC_SLAVE_WARN(slave, "Aborting SDO request, slave is in INIT.\n");
+ EC_SLAVE_WARN(slave, "Aborting SDO request %p, slave is in INIT.\n",request);
request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sdo_request_release);
wake_up(&slave->sdo_queue);
fsm->sdo_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
@@ -197,14 +201,14 @@
request->req.state = EC_INT_REQUEST_BUSY;
// Found pending SDO request. Execute it!
- EC_SLAVE_DBG(slave, 1, "Processing SDO request...\n");
+ EC_SLAVE_DBG(slave, 1, "Processing SDO request %p...\n",request);
// Start SDO transfer
- fsm->sdo_request = &request->req;
+ fsm->sdo_request = request;
fsm->state = ec_fsm_slave_state_sdo_request;
ec_fsm_coe_transfer(&fsm->fsm_coe, slave, &request->req);
ec_fsm_coe_exec(&fsm->fsm_coe); // execute immediately
- ec_master_queue_external_datagram(fsm->slave->master,fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return 1;
}
return 0;
@@ -219,26 +223,28 @@
)
{
ec_slave_t *slave = fsm->slave;
- ec_sdo_request_t *request = fsm->sdo_request;
+ ec_master_sdo_request_t *request = fsm->sdo_request;
if (ec_fsm_coe_exec(&fsm->fsm_coe))
{
- ec_master_queue_external_datagram(fsm->slave->master,fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return;
}
if (!ec_fsm_coe_success(&fsm->fsm_coe)) {
- EC_SLAVE_ERR(slave, "Failed to process SDO request.\n");
- request->state = EC_INT_REQUEST_FAILURE;
+ EC_SLAVE_ERR(slave, "Failed to process SDO request %p.\n",request);
+ request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sdo_request_release);
wake_up(&slave->sdo_queue);
fsm->sdo_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
return;
}
- EC_SLAVE_DBG(slave, 1, "Finished SDO request.\n");
+ EC_SLAVE_DBG(slave, 1, "Finished SDO request %p.\n",request);
// SDO request finished
- request->state = EC_INT_REQUEST_SUCCESS;
+ request->req.state = EC_INT_REQUEST_SUCCESS;
+ kref_put(&request->refcount,ec_master_sdo_request_release);
wake_up(&slave->sdo_queue);
fsm->sdo_request = NULL;
@@ -261,10 +267,11 @@
// search the first request to be processed
list_for_each_entry_safe(request, next, &slave->foe_requests, list) {
if (slave->current_state & EC_SLAVE_STATE_ACK_ERR) {
- EC_SLAVE_WARN(slave, "Aborting FOE request,"
- " slave has error flag set.\n");
+ EC_SLAVE_WARN(slave, "Aborting FOE request %p,"
+ " slave has error flag set.\n",request);
request->req.state = EC_INT_REQUEST_FAILURE;
- wake_up(&slave->sdo_queue);
+ kref_put(&request->refcount,ec_master_foe_request_release);
+ wake_up(&slave->foe_queue);
fsm->sdo_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
return 0;
@@ -272,13 +279,13 @@
list_del_init(&request->list); // dequeue
request->req.state = EC_INT_REQUEST_BUSY;
- EC_SLAVE_DBG(slave, 1, "Processing FoE request.\n");
-
- fsm->foe_request = &request->req;
+ EC_SLAVE_DBG(slave, 1, "Processing FoE request %p.\n",request);
+
+ fsm->foe_request = request;
fsm->state = ec_fsm_slave_state_foe_request;
ec_fsm_foe_transfer(&fsm->fsm_foe, slave, &request->req);
ec_fsm_foe_exec(&fsm->fsm_foe);
- ec_master_queue_external_datagram(fsm->slave->master,fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return 1;
}
return 0;
@@ -293,17 +300,18 @@
)
{
ec_slave_t *slave = fsm->slave;
- ec_foe_request_t *request = fsm->foe_request;
+ ec_master_foe_request_t *request = fsm->foe_request;
if (ec_fsm_foe_exec(&fsm->fsm_foe))
{
- ec_master_queue_external_datagram(fsm->slave->master,fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return;
}
if (!ec_fsm_foe_success(&fsm->fsm_foe)) {
- EC_SLAVE_ERR(slave, "Failed to handle FoE request.\n");
- request->state = EC_INT_REQUEST_FAILURE;
+ EC_SLAVE_ERR(slave, "Failed to handle FoE request %p.\n",request);
+ request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_foe_request_release);
wake_up(&slave->foe_queue);
fsm->foe_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
@@ -311,10 +319,11 @@
}
// finished transferring FoE
- EC_SLAVE_DBG(slave, 1, "Successfully transferred %zu bytes of FoE"
- " data.\n", request->data_size);
-
- request->state = EC_INT_REQUEST_SUCCESS;
+ EC_SLAVE_DBG(slave, 1, "FoE request %p successfully transferred %zu bytes.\n",
+ request,request->req.data_size);
+
+ request->req.state = EC_INT_REQUEST_SUCCESS;
+ kref_put(&request->refcount,ec_master_foe_request_release);
wake_up(&slave->foe_queue);
fsm->foe_request = NULL;
@@ -332,16 +341,17 @@
)
{
ec_slave_t *slave = fsm->slave;
- ec_master_soe_request_t *req, *next;
+ ec_master_soe_request_t *request, *next;
// search the first request to be processed
- list_for_each_entry_safe(req, next, &slave->soe_requests, list) {
-
- list_del_init(&req->list); // dequeue
+ list_for_each_entry_safe(request, next, &slave->soe_requests, list) {
+
+ list_del_init(&request->list); // dequeue
if (slave->current_state & EC_SLAVE_STATE_ACK_ERR) {
EC_SLAVE_WARN(slave, "Aborting SoE request,"
" slave has error flag set.\n");
- req->req.state = EC_INT_REQUEST_FAILURE;
+ request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_soe_request_release);
wake_up(&slave->soe_queue);
fsm->state = ec_fsm_slave_state_idle;
return 0;
@@ -349,23 +359,24 @@
if (slave->current_state == EC_SLAVE_STATE_INIT) {
EC_SLAVE_WARN(slave, "Aborting SoE request, slave is in INIT.\n");
- req->req.state = EC_INT_REQUEST_FAILURE;
+ request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_soe_request_release);
wake_up(&slave->soe_queue);
fsm->state = ec_fsm_slave_state_idle;
return 0;
}
- req->req.state = EC_INT_REQUEST_BUSY;
+ request->req.state = EC_INT_REQUEST_BUSY;
// Found pending request. Execute it!
EC_SLAVE_DBG(slave, 1, "Processing SoE request...\n");
// Start SoE transfer
- fsm->soe_request = &req->req;
+ fsm->soe_request = request;
fsm->state = ec_fsm_slave_state_soe_request;
- ec_fsm_soe_transfer(&fsm->fsm_soe, slave, &req->req);
+ ec_fsm_soe_transfer(&fsm->fsm_soe, slave, &request->req);
ec_fsm_soe_exec(&fsm->fsm_soe); // execute immediately
- ec_master_queue_external_datagram(fsm->slave->master, fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return 1;
}
return 0;
@@ -380,16 +391,17 @@
)
{
ec_slave_t *slave = fsm->slave;
- ec_soe_request_t *request = fsm->soe_request;
+ ec_master_soe_request_t *request = fsm->soe_request;
if (ec_fsm_soe_exec(&fsm->fsm_soe)) {
- ec_master_queue_external_datagram(fsm->slave->master, fsm->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm->mbox);
return;
}
if (!ec_fsm_soe_success(&fsm->fsm_soe)) {
EC_SLAVE_ERR(slave, "Failed to process SoE request.\n");
- request->state = EC_INT_REQUEST_FAILURE;
+ request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_soe_request_release);
wake_up(&slave->soe_queue);
fsm->soe_request = NULL;
fsm->state = ec_fsm_slave_state_idle;
@@ -399,7 +411,8 @@
EC_SLAVE_DBG(slave, 1, "Finished SoE request.\n");
// SoE request finished
- request->state = EC_INT_REQUEST_SUCCESS;
+ request->req.state = EC_INT_REQUEST_SUCCESS;
+ kref_put(&request->refcount,ec_master_soe_request_release);
wake_up(&slave->soe_queue);
fsm->soe_request = NULL;
--- a/master/fsm_slave.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_slave.h Fri May 13 15:34:20 2011 +0200
@@ -42,6 +42,7 @@
#include "fsm_coe.h"
#include "fsm_foe.h"
#include "fsm_soe.h"
+#include "fsm_master.h"
typedef struct ec_fsm_slave ec_fsm_slave_t; /**< \see ec_fsm_slave */
@@ -49,13 +50,13 @@
*/
struct ec_fsm_slave {
ec_slave_t *slave; /**< slave the FSM runs on */
- ec_datagram_t *datagram; /**< datagram used in the state machine */
+ ec_mailbox_t *mbox; /**< mailbox used in the state machine */
void (*state)(ec_fsm_slave_t *); /**< master state function */
- ec_sdo_request_t *sdo_request; /**< SDO request to process. */
- ec_foe_request_t *foe_request; /**< FoE request to process. */
+ ec_master_sdo_request_t *sdo_request; /**< SDO request to process. */
+ ec_master_foe_request_t *foe_request; /**< FoE request to process. */
off_t foe_index; /**< index to FoE write request data */
- ec_soe_request_t *soe_request; /**< SoE request to process. */
+ ec_master_soe_request_t *soe_request; /**< SoE request to process. */
ec_fsm_coe_t fsm_coe; /**< CoE state machine */
ec_fsm_foe_t fsm_foe; /**< FoE state machine */
@@ -64,10 +65,10 @@
/*****************************************************************************/
-void ec_fsm_slave_init(ec_fsm_slave_t *, ec_slave_t *, ec_datagram_t *);
+void ec_fsm_slave_init(ec_fsm_slave_t *, ec_slave_t *, ec_mailbox_t *);
void ec_fsm_slave_clear(ec_fsm_slave_t *);
-void ec_fsm_slave_exec(ec_fsm_slave_t *);
+int ec_fsm_slave_exec(ec_fsm_slave_t *);
void ec_fsm_slave_ready(ec_fsm_slave_t *);
/*****************************************************************************/
--- a/master/fsm_slave_config.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_slave_config.c Fri May 13 15:34:20 2011 +0200
@@ -177,8 +177,8 @@
ec_fsm_slave_config_t *fsm /**< slave state machine */
)
{
- if (fsm->datagram->state == EC_DATAGRAM_SENT
- || fsm->datagram->state == EC_DATAGRAM_QUEUED) {
+ if (fsm->datagram->state == EC_DATAGRAM_QUEUED
+ || fsm->datagram->state == EC_DATAGRAM_SENT) {
// datagram was not sent or received yet.
return ec_fsm_slave_config_running(fsm);
}
@@ -738,8 +738,7 @@
ec_soe_request_write(&fsm->soe_request_copy);
ec_fsm_soe_transfer(fsm_soe, fsm->slave, &fsm->soe_request_copy);
ec_fsm_soe_exec(fsm_soe); // execute immediately
- ec_master_queue_external_datagram(slave->master,
- fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
}
@@ -760,7 +759,7 @@
ec_fsm_soe_t *fsm_soe = &slave->fsm.fsm_soe;
if (ec_fsm_soe_exec(fsm_soe)) {
- ec_master_queue_external_datagram(slave->master, fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
@@ -785,8 +784,7 @@
ec_soe_request_write(&fsm->soe_request_copy);
ec_fsm_soe_transfer(fsm_soe, fsm->slave, &fsm->soe_request_copy);
ec_fsm_soe_exec(fsm_soe); // execute immediately
- ec_master_queue_external_datagram(slave->master,
- fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
}
@@ -1248,7 +1246,7 @@
abs_sync_diff = EC_READ_U32(datagram->data) & 0x7fffffff;
diff_ms = (datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
- if (abs_sync_diff > EC_DC_MAX_SYNC_DIFF_NS) {
+ if (abs_sync_diff > EC_DC_MAX_SYNC_DIFF_NS) {
if (diff_ms >= EC_DC_SYNC_WAIT_MS) {
EC_SLAVE_WARN(slave, "Slave did not sync after %lu ms.\n",
@@ -1454,8 +1452,7 @@
ec_soe_request_write(&fsm->soe_request_copy);
ec_fsm_soe_transfer(fsm_soe, fsm->slave, &fsm->soe_request_copy);
ec_fsm_soe_exec(fsm_soe); // execute immediately
- ec_master_queue_external_datagram(slave->master,
- fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
}
@@ -1476,7 +1473,7 @@
ec_fsm_soe_t *fsm_soe = &slave->fsm.fsm_soe;
if (ec_fsm_soe_exec(fsm_soe)) {
- ec_master_queue_external_datagram(slave->master, fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
@@ -1501,8 +1498,7 @@
ec_soe_request_write(&fsm->soe_request_copy);
ec_fsm_soe_transfer(fsm_soe, fsm->slave, &fsm->soe_request_copy);
ec_fsm_soe_exec(fsm_soe); // execute immediately
- ec_master_queue_external_datagram(slave->master,
- fsm_soe->datagram);
+ ec_slave_mbox_queue_datagrams(slave, fsm_soe->mbox);
return;
}
}
--- a/master/fsm_slave_scan.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_slave_scan.c Fri May 13 15:34:20 2011 +0200
@@ -137,8 +137,8 @@
int ec_fsm_slave_scan_exec(ec_fsm_slave_scan_t *fsm /**< slave state machine */)
{
- if (fsm->datagram->state == EC_DATAGRAM_SENT
- || fsm->datagram->state == EC_DATAGRAM_QUEUED) {
+ if (fsm->datagram->state == EC_DATAGRAM_QUEUED
+ || fsm->datagram->state == EC_DATAGRAM_SENT) {
// datagram was not sent or received yet.
return ec_fsm_slave_scan_running(fsm);
}
--- a/master/fsm_soe.c Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_soe.c Fri May 13 15:34:20 2011 +0200
@@ -106,11 +106,11 @@
*/
void ec_fsm_soe_init(
ec_fsm_soe_t *fsm, /**< finite state machine */
- ec_datagram_t *datagram /**< datagram */
+ ec_mailbox_t *mbox /**< mailbox */
)
{
fsm->state = NULL;
- fsm->datagram = datagram;
+ fsm->mbox = mbox;
}
/*****************************************************************************/
@@ -195,7 +195,7 @@
*/
void ec_fsm_soe_read_start(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
ec_soe_request_t *request = fsm->request;
@@ -211,7 +211,7 @@
return;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, EC_MBOX_TYPE_SOE,
+ data = ec_slave_mbox_prepare_send(slave, mbox, EC_MBOX_TYPE_SOE,
EC_SOE_SIZE);
if (IS_ERR(data)) {
fsm->state = ec_fsm_soe_error;
@@ -240,25 +240,25 @@
*/
void ec_fsm_soe_read_request(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
unsigned long diff_ms;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE read request: ");
- ec_datagram_print_state(datagram);
+ ec_datagram_print_state(mbox->datagram);
ec_fsm_soe_print_error(fsm);
return;
}
diff_ms = (jiffies - fsm->request->jiffies_sent) * 1000 / HZ;
- if (datagram->working_counter != 1) {
- if (!datagram->working_counter) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
if (diff_ms < EC_SOE_RESPONSE_TIMEOUT) {
// no response; send request datagram again
return;
@@ -267,13 +267,13 @@
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE read request"
" failed after %lu ms: ", diff_ms);
- ec_datagram_print_wc_error(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_datagram_print_wc_error(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ fsm->jiffies_start = mbox->datagram->jiffies_sent;
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_soe_read_check;
}
@@ -284,32 +284,32 @@
*/
void ec_fsm_soe_read_check(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
- ec_slave_t *slave = fsm->slave;
-
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ ec_mailbox_t *mbox = fsm->mbox;
+ ec_slave_t *slave = fsm->slave;
+
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE mailbox check datagram: ");
- ec_datagram_print_state(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE mailbox check"
" datagram failed: ");
- ec_datagram_print_wc_error(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- if (!ec_slave_mbox_check(datagram)) {
+ ec_datagram_print_wc_error(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
- (datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
+ (mbox->datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_SOE_RESPONSE_TIMEOUT) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Timeout after %lu ms while waiting for"
@@ -318,13 +318,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_soe_read_response;
}
@@ -335,7 +335,7 @@
*/
void ec_fsm_soe_read_response(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
uint8_t *data, mbox_prot, header, opcode, incomplete, error_flag,
@@ -343,26 +343,26 @@
size_t rec_size, data_size;
ec_soe_request_t *req = fsm->request;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE read response datagram: ");
- ec_datagram_print_state(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE read response failed: ");
- ec_datagram_print_wc_error(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ ec_datagram_print_wc_error(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_soe_error;
ec_fsm_soe_print_error(fsm);
@@ -435,8 +435,8 @@
if (incomplete) {
EC_SLAVE_DBG(slave, 1, "SoE data incomplete. Waiting for fragment"
" at offset %zu.\n", req->data_size);
- fsm->jiffies_start = datagram->jiffies_sent;
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ fsm->jiffies_start = mbox->datagram->jiffies_sent;
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_soe_read_check;
} else {
@@ -459,7 +459,7 @@
ec_fsm_soe_t *fsm /**< finite state machine */
)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
ec_soe_request_t *req = fsm->request;
@@ -485,7 +485,7 @@
fragments_left++;
}
- data = ec_slave_mbox_prepare_send(slave, datagram, EC_MBOX_TYPE_SOE,
+ data = ec_slave_mbox_prepare_send(slave, mbox, EC_MBOX_TYPE_SOE,
EC_SOE_SIZE + fragment_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_soe_error;
@@ -539,25 +539,25 @@
*/
void ec_fsm_soe_write_request(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
unsigned long diff_ms;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: check for response first?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE write request: ");
- ec_datagram_print_state(datagram);
+ ec_datagram_print_state(mbox->datagram);
ec_fsm_soe_print_error(fsm);
return;
}
diff_ms = (jiffies - fsm->request->jiffies_sent) * 1000 / HZ;
- if (datagram->working_counter != 1) {
- if (!datagram->working_counter) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
if (diff_ms < EC_SOE_RESPONSE_TIMEOUT) {
// no response; send request datagram again
return;
@@ -566,14 +566,14 @@
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE write request"
" failed after %lu ms: ", diff_ms);
- ec_datagram_print_wc_error(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- fsm->jiffies_start = datagram->jiffies_sent;
-
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_datagram_print_wc_error(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ fsm->jiffies_start = mbox->datagram->jiffies_sent;
+
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_soe_write_check;
}
@@ -584,25 +584,25 @@
*/
void ec_fsm_soe_write_check(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_soe_request_t *req = fsm->request;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE write request datagram: ");
- ec_datagram_print_state(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE write request datagram: ");
- ec_datagram_print_wc_error(datagram);
+ ec_datagram_print_wc_error(mbox->datagram);
ec_fsm_soe_print_error(fsm);
return;
}
@@ -610,9 +610,9 @@
if (fsm->offset < req->data_size) {
ec_fsm_soe_write_next_fragment(fsm);
} else {
- if (!ec_slave_mbox_check(datagram)) {
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
- (datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
+ (mbox->datagram->jiffies_received - fsm->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_SOE_RESPONSE_TIMEOUT) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Timeout after %lu ms while waiting"
@@ -621,13 +621,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
fsm->retries = EC_FSM_RETRIES;
fsm->state = ec_fsm_soe_write_response;
}
@@ -639,7 +639,7 @@
*/
void ec_fsm_soe_write_response(ec_fsm_soe_t *fsm /**< finite state machine */)
{
- ec_datagram_t *datagram = fsm->datagram;
+ ec_mailbox_t *mbox = fsm->mbox;
ec_slave_t *slave = fsm->slave;
ec_master_t *master = slave->master;
ec_soe_request_t *req = fsm->request;
@@ -647,27 +647,27 @@
uint16_t idn;
size_t rec_size;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && fsm->retries--)
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && fsm->retries--)
return; // FIXME: request again?
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Failed to receive SoE write"
" response datagram: ");
- ec_datagram_print_state(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
fsm->state = ec_fsm_soe_error;
EC_SLAVE_ERR(slave, "Reception of SoE write response failed: ");
- ec_datagram_print_wc_error(datagram);
- ec_fsm_soe_print_error(fsm);
- return;
- }
-
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ ec_datagram_print_wc_error(mbox->datagram);
+ ec_fsm_soe_print_error(fsm);
+ return;
+ }
+
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
fsm->state = ec_fsm_soe_error;
ec_fsm_soe_print_error(fsm);
--- a/master/fsm_soe.h Fri May 13 15:33:16 2011 +0200
+++ b/master/fsm_soe.h Fri May 13 15:34:20 2011 +0200
@@ -50,7 +50,7 @@
*/
struct ec_fsm_soe {
ec_slave_t *slave; /**< slave the FSM runs on */
- ec_datagram_t *datagram; /**< datagram used in the state machine */
+ ec_mailbox_t *mbox; /**< mailbox used in the state machine */
unsigned int retries; /**< retries upon datagram timeout */
void (*state)(ec_fsm_soe_t *); /**< CoE state function */
@@ -61,7 +61,7 @@
/*****************************************************************************/
-void ec_fsm_soe_init(ec_fsm_soe_t *, ec_datagram_t *);
+void ec_fsm_soe_init(ec_fsm_soe_t *, ec_mailbox_t *);
void ec_fsm_soe_clear(ec_fsm_soe_t *);
void ec_fsm_soe_transfer(ec_fsm_soe_t *, ec_slave_t *, ec_soe_request_t *);
--- a/master/globals.h Fri May 13 15:33:16 2011 +0200
+++ b/master/globals.h Fri May 13 15:34:20 2011 +0200
@@ -39,6 +39,17 @@
#include "../globals.h"
#include "../include/ecrt.h"
+#ifdef __KERNEL__
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
+#include <linux/rtmutex.h>
+#endif // KERNEL_VERSION(2,6,24)
+#endif // __KERNEL__
+
+#ifdef CONFIG_TRACING
+//#define USE_TRACE_PRINTK
+#endif
+
/******************************************************************************
* EtherCAT master
*****************************************************************************/
@@ -46,8 +57,8 @@
/** Datagram timeout in microseconds. */
#define EC_IO_TIMEOUT 500
-/** SDO injection timeout in microseconds. */
-#define EC_SDO_INJECTION_TIMEOUT 10000
+/** FSM injection timeout in microseconds. */
+#define EC_FSM_INJECTION_TIMEOUT 10000
/** Time to send a byte in nanoseconds.
*
@@ -97,9 +108,6 @@
/** Word offset of first SII category. */
#define EC_FIRST_SII_CATEGORY_OFFSET 0x40
-/** Maximum number of slave ports. */
-#define EC_MAX_PORTS 4
-
/** Size of a sync manager configuration page. */
#define EC_SYNC_PAGE_SIZE 8
@@ -173,23 +181,6 @@
uint8_t enable_not_lrw : 1; /**< Slave does not support LRW. */
} ec_sii_general_flags_t;
-/** EtherCAT slave port descriptor.
- */
-typedef enum {
- EC_PORT_NOT_IMPLEMENTED,
- EC_PORT_NOT_CONFIGURED,
- EC_PORT_EBUS,
- EC_PORT_MII
-} ec_slave_port_desc_t;
-
-/** EtherCAT slave port information.
- */
-typedef struct {
- uint8_t link_up; /**< Link detected. */
- uint8_t loop_closed; /**< Loop closed. */
- uint8_t signal_detected; /**< Detected signal on RX port. */
-} ec_slave_port_link_t;
-
/** EtherCAT slave distributed clocks range.
*/
typedef enum {
@@ -325,4 +316,60 @@
/*****************************************************************************/
+/*****************************************************************************/
+
+#ifdef __KERNEL__
+
+/** Mutual exclusion helpers.
+ *
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
+#define ec_mutex_t rt_mutex
+static inline void ec_mutex_init(struct ec_mutex_t *mutex)
+{
+ rt_mutex_init(mutex);
+}
+static inline void ec_mutex_lock(struct ec_mutex_t *mutex)
+{
+ rt_mutex_lock(mutex);
+}
+static inline int ec_mutex_trylock(struct ec_mutex_t *mutex)
+{
+ return rt_mutex_trylock(mutex);
+}
+static inline int ec_mutex_lock_interruptible(struct ec_mutex_t *mutex)
+{
+ return rt_mutex_lock_interruptible(mutex,0);
+}
+static inline void ec_mutex_unlock(struct ec_mutex_t *mutex)
+{
+ rt_mutex_unlock(mutex);
+}
+#else // < KERNEL_VERSION(2,6,24)
+#define ec_mutex_t semaphore
+static inline void ec_mutex_init(struct ec_mutex_t *sem)
+{
+ sema_init(sem, 1);
+}
+static inline void ec_mutex_lock(struct ec_mutex_t *sem)
+{
+ down(sem);
+}
+static inline int ec_mutex_trylock(struct ec_mutex_t *sem)
+{
+ down(sem);
+ return 1;
+}
+static inline int ec_mutex_lock_interruptible(struct ec_mutex_t *sem)
+{
+ return down_interruptible(sem);
+}
+static inline void ec_mutex_unlock(struct ec_mutex_t *sem)
+{
+ up(sem);
+}
+
+#endif // KERNEL_VERSION(2,6,24)
+#endif // __KERNEL__
+
#endif
--- a/master/ioctl.h Fri May 13 15:33:16 2011 +0200
+++ b/master/ioctl.h Fri May 13 15:34:20 2011 +0200
@@ -56,7 +56,7 @@
*
* Increment this when changing the ioctl interface!
*/
-#define EC_IOCTL_VERSION_MAGIC 11
+#define EC_IOCTL_VERSION_MAGIC 12
// Command-line tool
#define EC_IOCTL_MODULE EC_IOR(0x00, ec_ioctl_module_t)
@@ -137,6 +137,8 @@
#define EC_IOCTL_VOE_EXEC EC_IOWR(0x47, ec_ioctl_voe_t)
#define EC_IOCTL_VOE_DATA EC_IOWR(0x48, ec_ioctl_voe_t)
#define EC_IOCTL_SET_SEND_INTERVAL EC_IOW(0x49, size_t)
+#define EC_IOCTL_MASTER_SC_STATE EC_IOR(0x50, ec_master_state_t)
+#define EC_IOCTL_SC_OVERLAPPING_IO EC_IOW(0x51, ec_ioctl_config_t)
/*****************************************************************************/
@@ -278,6 +280,7 @@
// outputs
uint32_t data_size;
+ uint32_t tx_size;
uint32_t logical_base_address;
uint16_t working_counter;
uint16_t expected_working_counter;
@@ -297,6 +300,7 @@
uint8_t sync_index;
ec_direction_t dir;
uint32_t logical_address;
+ uint32_t domain_address;
uint32_t data_size;
} ec_ioctl_domain_fmmu_t;
@@ -459,6 +463,7 @@
} syncs[EC_MAX_SYNC_MANAGERS];
uint16_t watchdog_divider;
uint16_t watchdog_intervals;
+ uint8_t allow_overlapping_pdos;
uint32_t sdo_count;
uint32_t idn_count;
int32_t slave_position;
--- a/master/mailbox.c Fri May 13 15:33:16 2011 +0200
+++ b/master/mailbox.c Fri May 13 15:34:20 2011 +0200
@@ -37,10 +37,84 @@
#include <linux/slab.h>
#include <linux/delay.h>
+#include "slave.h"
#include "mailbox.h"
#include "datagram.h"
#include "master.h"
+
+/*****************************************************************************/
+
+/**
+ Mailbox constructor.
+*/
+
+void ec_mbox_init(ec_mailbox_t* mbox, /** mailbox */
+ ec_datagram_t* datagram /**< Datagram used for the mailbox content. */
+ )
+{
+ mbox->datagram = datagram;
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ ec_datagram_init(&mbox->end_datagram);
+#endif
+}
+
+
+/*****************************************************************************/
+
+/**
+ Clears mailbox datagrams.
+*/
+
+void ec_mbox_clear(ec_mailbox_t* mbox /** mailbox */
+ )
+{
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ ec_datagram_clear(&mbox->end_datagram);
+#endif
+}
+
+
+/*****************************************************************************/
+
+/**
+ Queues the slave datagrams.
+*/
+
+void ec_slave_mbox_queue_datagrams(const ec_slave_t* slave, /** slave */
+ ec_mailbox_t* mbox /** mailbox */
+ )
+{
+ ec_master_queue_request_fsm_datagram(slave->master, mbox->datagram);
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ if (mbox->end_datagram.type != EC_DATAGRAM_NONE)
+ {
+ ec_master_queue_request_fsm_datagram(slave->master, &mbox->end_datagram);
+ }
+#endif
+}
+
+
+/*****************************************************************************/
+
+/**
+ Queues the datagrams.
+*/
+
+void ec_master_mbox_queue_datagrams(ec_master_t* master, /** master */
+ ec_mailbox_t* mbox /** mailbox */
+ )
+{
+ ec_master_queue_fsm_datagram(master, mbox->datagram);
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ if (mbox->end_datagram.type != EC_DATAGRAM_NONE)
+ {
+ ec_master_queue_fsm_datagram(master, &mbox->end_datagram);
+ }
+#endif
+}
+
+
/*****************************************************************************/
/**
@@ -48,12 +122,13 @@
\return Pointer to mailbox datagram data, or ERR_PTR() code.
*/
-uint8_t *ec_slave_mbox_prepare_send(const ec_slave_t *slave, /**< slave */
- ec_datagram_t *datagram, /**< datagram */
+uint8_t *ec_slave_mbox_prepare_send(const ec_slave_t* slave, /** slave */
+ ec_mailbox_t* mbox, /** mailbox */
uint8_t type, /**< mailbox protocol */
size_t size /**< size of the data */
)
{
+ ec_datagram_t* datagram = mbox->datagram;
size_t total_size;
int ret;
@@ -72,8 +147,13 @@
}
ret = ec_datagram_fpwr(datagram, slave->station_address,
- slave->configured_rx_mailbox_offset,
- slave->configured_rx_mailbox_size);
+ slave->configured_rx_mailbox_offset,
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ total_size
+#else
+ slave->configured_rx_mailbox_size
+#endif
+ );
if (ret)
return ERR_PTR(ret);
@@ -82,6 +162,17 @@
EC_WRITE_U8 (datagram->data + 4, 0x00); // channel & priority
EC_WRITE_U8 (datagram->data + 5, type); // underlying protocol type
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ /* in order to fulfil the ESC's mailbox protocol,
+ at least the last byte of the mailbox must be written */
+ if (total_size < slave->configured_rx_mailbox_size) {
+ ret = ec_datagram_fpwr(&mbox->end_datagram, slave->station_address,
+ slave->configured_rx_mailbox_offset+slave->configured_rx_mailbox_size-1,
+ 1);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+#endif
return datagram->data + EC_MBOX_HEADER_SIZE;
}
@@ -93,15 +184,19 @@
\return 0 in case of success, else < 0
*/
-int ec_slave_mbox_prepare_check(const ec_slave_t *slave, /**< slave */
- ec_datagram_t *datagram /**< datagram */
+int ec_slave_mbox_prepare_check(const ec_slave_t* slave, /** slave */
+ ec_mailbox_t* mbox /** mailbox */
)
{
+ ec_datagram_t* datagram = mbox->datagram;
int ret = ec_datagram_fprd(datagram, slave->station_address, 0x808, 8);
if (ret)
return ret;
ec_datagram_zero(datagram);
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ mbox->end_datagram.type = EC_DATAGRAM_NONE;
+#endif
return 0;
}
@@ -112,9 +207,9 @@
\return 0 in case of success, else < 0
*/
-int ec_slave_mbox_check(const ec_datagram_t *datagram /**< datagram */)
-{
- return EC_READ_U8(datagram->data + 5) & 8 ? 1 : 0;
+int ec_slave_mbox_check(ec_mailbox_t* mbox /** mailbox */)
+{
+ return EC_READ_U8(mbox->datagram->data + 5) & 8 ? 1 : 0;
}
/*****************************************************************************/
@@ -124,10 +219,11 @@
\return 0 in case of success, else < 0
*/
-int ec_slave_mbox_prepare_fetch(const ec_slave_t *slave, /**< slave */
- ec_datagram_t *datagram /**< datagram */
+int ec_slave_mbox_prepare_fetch(const ec_slave_t* slave, /** slave */
+ ec_mailbox_t* mbox /** mailbox */
)
{
+ ec_datagram_t* datagram = mbox->datagram;
int ret = ec_datagram_fprd(datagram, slave->station_address,
slave->configured_tx_mailbox_offset,
slave->configured_tx_mailbox_size);
@@ -135,6 +231,9 @@
return ret;
ec_datagram_zero(datagram);
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ mbox->end_datagram.type = EC_DATAGRAM_NONE;
+#endif
return 0;
}
@@ -162,12 +261,13 @@
*
* \return Pointer to the received data, or ERR_PTR() code.
*/
-uint8_t *ec_slave_mbox_fetch(const ec_slave_t *slave, /**< slave */
- ec_datagram_t *datagram, /**< datagram */
+uint8_t *ec_slave_mbox_fetch(const ec_slave_t* slave, /** slave */
+ ec_mailbox_t* mbox, /** mailbox */
uint8_t *type, /**< expected mailbox protocol */
size_t *size /**< size of the received data */
)
{
+ ec_datagram_t* datagram = mbox->datagram;
size_t data_size;
data_size = EC_READ_U16(datagram->data);
--- a/master/mailbox.h Fri May 13 15:33:16 2011 +0200
+++ b/master/mailbox.h Fri May 13 15:34:20 2011 +0200
@@ -37,7 +37,8 @@
#ifndef __EC_MAILBOX_H__
#define __EC_MAILBOX_H__
-#include "slave.h"
+#include "globals.h"
+#include "datagram.h"
/*****************************************************************************/
@@ -47,12 +48,53 @@
/*****************************************************************************/
-uint8_t *ec_slave_mbox_prepare_send(const ec_slave_t *, ec_datagram_t *,
+/** EtherCAT slave mailbox.
+ */
+struct ec_mailbox
+{
+ ec_datagram_t* datagram; /**< Datagram used for the mailbox content. */
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ ec_datagram_t end_datagram; /**< Datagram used for writing the end byte to the mailbox. */
+#endif
+};
+typedef struct ec_mailbox ec_mailbox_t; /**< \see ec_mailbox. */
+
+/*****************************************************************************/
+
+void ec_mbox_init(ec_mailbox_t *, ec_datagram_t*);
+void ec_mbox_clear(ec_mailbox_t*);
+/**
+ Checks the datagrams states.
+*/
+static inline int ec_mbox_is_datagram_state(ec_mailbox_t*mbox,
+ ec_datagram_state_t state) {
+ return (mbox->datagram->state == state)
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ && (mbox->end_datagram.type == EC_DATAGRAM_NONE || mbox->end_datagram.state == state)
+#endif
+ ;
+}
+
+/**
+ Checks the datagrams working counter.
+*/
+static inline int ec_mbox_is_datagram_wc(ec_mailbox_t*mbox,
+ size_t wc) {
+ return (mbox->datagram->working_counter == wc)
+#ifdef EC_REDUCE_MBOXFRAMESIZE
+ && (mbox->end_datagram.type == EC_DATAGRAM_NONE || mbox->end_datagram.working_counter == wc)
+#endif
+ ;
+}
+
+void ec_slave_mbox_queue_datagrams(const ec_slave_t*,ec_mailbox_t*);
+void ec_master_mbox_queue_datagrams(ec_master_t*, ec_mailbox_t*);
+uint8_t *ec_slave_mbox_prepare_send(const ec_slave_t*,ec_mailbox_t *,
uint8_t, size_t);
-int ec_slave_mbox_prepare_check(const ec_slave_t *, ec_datagram_t *);
-int ec_slave_mbox_check(const ec_datagram_t *);
-int ec_slave_mbox_prepare_fetch(const ec_slave_t *, ec_datagram_t *);
-uint8_t *ec_slave_mbox_fetch(const ec_slave_t *, ec_datagram_t *,
+int ec_slave_mbox_prepare_check(const ec_slave_t*,ec_mailbox_t *);
+int ec_slave_mbox_check(ec_mailbox_t *);
+int ec_slave_mbox_prepare_fetch(const ec_slave_t*,ec_mailbox_t *);
+uint8_t *ec_slave_mbox_fetch(const ec_slave_t*,ec_mailbox_t *,
uint8_t *, size_t *);
/*****************************************************************************/
--- a/master/master.c Fri May 13 15:33:16 2011 +0200
+++ b/master/master.c Fri May 13 15:34:20 2011 +0200
@@ -56,9 +56,13 @@
/*****************************************************************************/
-/** Set to 1 to enable external datagram injection debugging.
- */
+/** Set to 1 to enable fsm datagram injection debugging.
+ */
+#ifdef USE_TRACE_PRINTK
+#define DEBUG_INJECT 1
+#else
#define DEBUG_INJECT 0
+#endif
#ifdef EC_HAVE_CYCLES
@@ -66,9 +70,9 @@
*/
static cycles_t timeout_cycles;
-/** Timeout for external datagram injection [cycles].
- */
-static cycles_t ext_injection_timeout_cycles;
+/** Timeout for fsm datagram injection [cycles].
+ */
+static cycles_t fsm_injection_timeout_cycles;
#else
@@ -76,9 +80,9 @@
*/
static unsigned long timeout_jiffies;
-/** Timeout for external datagram injection [jiffies].
- */
-static unsigned long ext_injection_timeout_jiffies;
+/** Timeout for fsm datagram injection [jiffies].
+ */
+static unsigned long fsm_injection_timeout_jiffies;
#endif
@@ -89,7 +93,7 @@
static int ec_master_idle_thread(void *);
static int ec_master_operation_thread(void *);
#ifdef EC_EOE
-static int ec_master_eoe_thread(void *);
+static int ec_master_eoe_processing(ec_master_t *);
#endif
void ec_master_find_dc_ref_clock(ec_master_t *);
@@ -101,11 +105,11 @@
{
#ifdef EC_HAVE_CYCLES
timeout_cycles = (cycles_t) EC_IO_TIMEOUT /* us */ * (cpu_khz / 1000);
- ext_injection_timeout_cycles = (cycles_t) EC_SDO_INJECTION_TIMEOUT /* us */ * (cpu_khz / 1000);
+ fsm_injection_timeout_cycles = (cycles_t) EC_FSM_INJECTION_TIMEOUT /* us */ * (cpu_khz / 1000);
#else
// one jiffy may always elapse between time measurement
timeout_jiffies = max(EC_IO_TIMEOUT * HZ / 1000000, 1);
- ext_injection_timeout_jiffies = max(EC_SDO_INJECTION_TIMEOUT * HZ / 1000000, 1);
+ fsm_injection_timeout_jiffies = max(EC_FSM_INJECTION_TIMEOUT * HZ / 1000000, 1);
#endif
}
@@ -130,12 +134,12 @@
master->index = index;
master->reserved = 0;
- sema_init(&master->master_sem, 1);
+ ec_mutex_init(&master->master_mutex);
master->main_mac = main_mac;
master->backup_mac = backup_mac;
- sema_init(&master->device_sem, 1);
+ ec_mutex_init(&master->device_mutex);
master->phase = EC_ORPHANED;
master->active = 0;
@@ -145,30 +149,32 @@
master->slaves = NULL;
master->slave_count = 0;
-
+
INIT_LIST_HEAD(&master->configs);
master->app_time = 0ULL;
+#ifdef EC_HAVE_CYCLES
+ master->dc_cycles_app_start_time = 0;
+#endif
+ master->dc_jiffies_app_start_time = 0;
master->app_start_time = 0ULL;
master->has_app_time = 0;
master->scan_busy = 0;
master->allow_scan = 1;
- sema_init(&master->scan_sem, 1);
+ ec_mutex_init(&master->scan_mutex);
init_waitqueue_head(&master->scan_queue);
master->config_busy = 0;
master->allow_config = 1;
- sema_init(&master->config_sem, 1);
+ ec_mutex_init(&master->config_mutex);
init_waitqueue_head(&master->config_queue);
INIT_LIST_HEAD(&master->datagram_queue);
master->datagram_index = 0;
- INIT_LIST_HEAD(&master->ext_datagram_queue);
- sema_init(&master->ext_queue_sem, 1);
-
- INIT_LIST_HEAD(&master->external_datagram_queue);
+ ec_mutex_init(&master->fsm_queue_mutex);
+ INIT_LIST_HEAD(&master->fsm_datagram_queue);
// send interval in IDLE phase
ec_master_set_send_interval(master, 1000000 / HZ);
@@ -188,13 +194,13 @@
INIT_LIST_HEAD(&master->eoe_handlers);
#endif
- sema_init(&master->io_sem, 1);
- master->send_cb = NULL;
- master->receive_cb = NULL;
- master->cb_data = NULL;
- master->app_send_cb = NULL;
- master->app_receive_cb = NULL;
- master->app_cb_data = NULL;
+ ec_mutex_init(&master->io_mutex);
+ master->fsm_queue_lock_cb = NULL;
+ master->fsm_queue_unlock_cb = NULL;
+ master->fsm_queue_locking_data = NULL;
+ master->app_fsm_queue_lock_cb = NULL;
+ master->app_fsm_queue_unlock_cb = NULL;
+ master->app_fsm_queue_locking_data = NULL;
INIT_LIST_HEAD(&master->sii_requests);
init_waitqueue_head(&master->sii_queue);
@@ -222,6 +228,7 @@
}
// create state machine object
+ ec_mbox_init(&master->fsm_mbox,&master->fsm_datagram);
ec_fsm_master_init(&master->fsm, master, &master->fsm_datagram);
// init reference sync datagram
@@ -323,7 +330,7 @@
#endif
ec_cdev_clear(&master->cdev);
-
+
#ifdef EC_EOE
ec_master_clear_eoe_handlers(master);
#endif
@@ -335,6 +342,7 @@
ec_datagram_clear(&master->sync_datagram);
ec_datagram_clear(&master->ref_sync_datagram);
ec_fsm_master_clear(&master->fsm);
+ ec_mbox_clear(&master->fsm_mbox);
ec_datagram_clear(&master->fsm_datagram);
ec_device_clear(&master->backup_device);
ec_device_clear(&master->main_device);
@@ -395,6 +403,7 @@
EC_MASTER_WARN(master, "Discarding SII request, slave %u about"
" to be deleted.\n", request->slave->ring_position);
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sii_write_request_release);
wake_up(&master->sii_queue);
}
@@ -405,14 +414,18 @@
EC_MASTER_WARN(master, "Discarding register request, slave %u"
" about to be deleted.\n", request->slave->ring_position);
request->state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_reg_request_release);
wake_up(&master->reg_queue);
}
+ // we must lock the io_mutex here because the slave's fsm_datagram will be unqueued
+ ec_mutex_lock(&master->io_mutex);
for (slave = master->slaves;
slave < master->slaves + master->slave_count;
slave++) {
ec_slave_clear(slave);
}
+ ec_mutex_unlock(&master->io_mutex);
if (master->slaves) {
kfree(master->slaves);
@@ -430,11 +443,14 @@
{
ec_domain_t *domain, *next;
+ // we must lock the io_mutex here because the domains's datagram will be unqueued
+ ec_mutex_lock(&master->io_mutex);
list_for_each_entry_safe(domain, next, &master->domains, list) {
list_del(&domain->list);
ec_domain_clear(domain);
kfree(domain);
}
+ ec_mutex_unlock(&master->io_mutex);
}
/*****************************************************************************/
@@ -445,38 +461,10 @@
ec_master_t *master /**< EtherCAT master. */
)
{
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
ec_master_clear_domains(master);
ec_master_clear_slave_configs(master);
- up(&master->master_sem);
-}
-
-/*****************************************************************************/
-
-/** Internal sending callback.
- */
-void ec_master_internal_send_cb(
- void *cb_data /**< Callback data. */
- )
-{
- ec_master_t *master = (ec_master_t *) cb_data;
- down(&master->io_sem);
- ecrt_master_send_ext(master);
- up(&master->io_sem);
-}
-
-/*****************************************************************************/
-
-/** Internal receiving callback.
- */
-void ec_master_internal_receive_cb(
- void *cb_data /**< Callback data. */
- )
-{
- ec_master_t *master = (ec_master_t *) cb_data;
- down(&master->io_sem);
- ecrt_master_receive(master);
- up(&master->io_sem);
+ ec_mutex_unlock(&master->master_mutex);
}
/*****************************************************************************/
@@ -546,9 +534,9 @@
EC_MASTER_DBG(master, 1, "ORPHANED -> IDLE.\n");
- master->send_cb = ec_master_internal_send_cb;
- master->receive_cb = ec_master_internal_receive_cb;
- master->cb_data = master;
+ master->fsm_queue_lock_cb = NULL;
+ master->fsm_queue_unlock_cb = NULL;
+ master->fsm_queue_locking_data = NULL;
master->phase = EC_IDLE;
ret = ec_master_thread_start(master, ec_master_idle_thread,
@@ -569,14 +557,11 @@
master->phase = EC_ORPHANED;
-#ifdef EC_EOE
- ec_master_eoe_stop(master);
-#endif
ec_master_thread_stop(master);
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
ec_master_clear_slaves(master);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
}
/*****************************************************************************/
@@ -593,10 +578,10 @@
EC_MASTER_DBG(master, 1, "IDLE -> OPERATION.\n");
- down(&master->config_sem);
+ ec_mutex_lock(&master->config_mutex);
master->allow_config = 0; // temporarily disable slave configuration
if (master->config_busy) {
- up(&master->config_sem);
+ ec_mutex_unlock(&master->config_mutex);
// wait for slave configuration to complete
ret = wait_event_interruptible(master->config_queue,
@@ -610,15 +595,15 @@
EC_MASTER_DBG(master, 1, "Waiting for pending slave"
" configuration returned.\n");
} else {
- up(&master->config_sem);
- }
-
- down(&master->scan_sem);
+ ec_mutex_unlock(&master->config_mutex);
+ }
+
+ ec_mutex_lock(&master->scan_mutex);
master->allow_scan = 0; // 'lock' the slave list
if (!master->scan_busy) {
- up(&master->scan_sem);
+ ec_mutex_unlock(&master->scan_mutex);
} else {
- up(&master->scan_sem);
+ ec_mutex_unlock(&master->scan_mutex);
// wait for slave scan to complete
ret = wait_event_interruptible(master->scan_queue, !master->scan_busy);
@@ -648,9 +633,9 @@
#endif
master->phase = EC_OPERATION;
- master->app_send_cb = NULL;
- master->app_receive_cb = NULL;
- master->app_cb_data = NULL;
+ master->app_fsm_queue_lock_cb = NULL;
+ master->app_fsm_queue_unlock_cb = NULL;
+ master->app_fsm_queue_locking_data = NULL;
return ret;
out_allow:
@@ -680,27 +665,40 @@
/*****************************************************************************/
-/** Injects external datagrams that fit into the datagram queue.
- */
-void ec_master_inject_external_datagrams(
+/** Injects fsm datagrams that fit into the datagram queue.
+ */
+void ec_master_inject_fsm_datagrams(
ec_master_t *master /**< EtherCAT master */
)
{
- ec_datagram_t *datagram, *n;
+ ec_datagram_t *datagram, *next;
size_t queue_size = 0;
+ if (master->fsm_queue_lock_cb)
+ master->fsm_queue_lock_cb(master->fsm_queue_locking_data);
+ if (ec_mutex_trylock(&master->fsm_queue_mutex) == 0) {
+ if (master->fsm_queue_unlock_cb)
+ master->fsm_queue_unlock_cb(master->fsm_queue_locking_data);
+ return;
+ }
+ if (list_empty(&master->fsm_datagram_queue)) {
+ ec_mutex_unlock(&master->fsm_queue_mutex);
+ if (master->fsm_queue_unlock_cb)
+ master->fsm_queue_unlock_cb(master->fsm_queue_locking_data);
+ return;
+ }
list_for_each_entry(datagram, &master->datagram_queue, queue) {
queue_size += datagram->data_size;
}
- list_for_each_entry_safe(datagram, n, &master->external_datagram_queue,
- queue) {
+ list_for_each_entry_safe(datagram, next, &master->fsm_datagram_queue,
+ fsm_queue) {
queue_size += datagram->data_size;
if (queue_size <= master->max_queue_size) {
- list_del_init(&datagram->queue);
+ list_del_init(&datagram->fsm_queue);
#if DEBUG_INJECT
- EC_MASTER_DBG(master, 0, "Injecting external datagram %08x"
- " size=%u, queue_size=%u\n", (unsigned int) datagram,
+ EC_MASTER_DBG(master, 2, "Injecting fsm datagram %p"
+ " size=%zu, queue_size=%zu\n", datagram,
datagram->data_size, queue_size);
#endif
#ifdef EC_HAVE_CYCLES
@@ -711,9 +709,9 @@
}
else {
if (datagram->data_size > master->max_queue_size) {
- list_del_init(&datagram->queue);
+ list_del_init(&datagram->fsm_queue);
datagram->state = EC_DATAGRAM_ERROR;
- EC_MASTER_ERR(master, "External datagram %p is too large,"
+ EC_MASTER_ERR(master, "Fsm datagram %p is too large,"
" size=%zu, max_queue_size=%zu\n",
datagram, datagram->data_size,
master->max_queue_size);
@@ -722,15 +720,15 @@
cycles_t cycles_now = get_cycles();
if (cycles_now - datagram->cycles_sent
- > ext_injection_timeout_cycles)
+ > fsm_injection_timeout_cycles)
#else
if (jiffies - datagram->jiffies_sent
- > ext_injection_timeout_jiffies)
+ > fsm_injection_timeout_jiffies)
#endif
{
unsigned int time_us;
- list_del_init(&datagram->queue);
+ list_del_init(&datagram->fsm_queue);
datagram->state = EC_DATAGRAM_ERROR;
#ifdef EC_HAVE_CYCLES
time_us = (unsigned int)
@@ -741,21 +739,24 @@
((jiffies - datagram->jiffies_sent) * 1000000 / HZ);
#endif
EC_MASTER_ERR(master, "Timeout %u us: Injecting"
- " external datagram %p size=%zu,"
+ " fsm datagram %p size=%zu,"
" max_queue_size=%zu\n", time_us, datagram,
datagram->data_size, master->max_queue_size);
}
#if DEBUG_INJECT
else {
- EC_MASTER_DBG(master, 0, "Deferred injecting"
- " of external datagram %p"
- " size=%u, queue_size=%u\n",
+ EC_MASTER_DBG(master, 2, "Deferred injecting"
+ " of fsm datagram %p"
+ " size=%zu, queue_size=%zu\n",
datagram, datagram->data_size, queue_size);
}
#endif
}
}
}
+ ec_mutex_unlock(&master->fsm_queue_mutex);
+ if (master->fsm_queue_unlock_cb)
+ master->fsm_queue_unlock_cb(master->fsm_queue_locking_data);
}
/*****************************************************************************/
@@ -776,40 +777,59 @@
/*****************************************************************************/
-/** Places an external datagram in the sdo datagram queue.
- */
-void ec_master_queue_external_datagram(
+/** Places an request (SDO/FoE/SoE/EoE) fsm datagram in the sdo datagram queue.
+ */
+void ec_master_queue_request_fsm_datagram(
ec_master_t *master, /**< EtherCAT master */
ec_datagram_t *datagram /**< datagram */
)
{
+ ec_master_queue_fsm_datagram(master,datagram);
+ master->fsm.idle = 0; // pump the bus as fast as possible
+}
+
+/*****************************************************************************/
+
+/** Places an fsm datagram in the sdo datagram queue.
+ */
+void ec_master_queue_fsm_datagram(
+ ec_master_t *master, /**< EtherCAT master */
+ ec_datagram_t *datagram /**< datagram */
+ )
+{
ec_datagram_t *queued_datagram;
- down(&master->io_sem);
+ if (master->fsm_queue_lock_cb)
+ master->fsm_queue_lock_cb(master->fsm_queue_locking_data);
+ ec_mutex_lock(&master->fsm_queue_mutex);
// check, if the datagram is already queued
- list_for_each_entry(queued_datagram, &master->external_datagram_queue,
- queue) {
+ list_for_each_entry(queued_datagram, &master->fsm_datagram_queue,
+ fsm_queue) {
if (queued_datagram == datagram) {
datagram->state = EC_DATAGRAM_QUEUED;
+ ec_mutex_unlock(&master->fsm_queue_mutex);
+ if (master->fsm_queue_unlock_cb)
+ master->fsm_queue_unlock_cb(master->fsm_queue_locking_data);
return;
}
}
#if DEBUG_INJECT
- EC_MASTER_DBG(master, 0, "Requesting external datagram %p size=%u\n",
+ EC_MASTER_DBG(master, 2, "Requesting fsm datagram %p size=%zu\n",
datagram, datagram->data_size);
#endif
- list_add_tail(&datagram->queue, &master->external_datagram_queue);
+ list_add_tail(&datagram->fsm_queue, &master->fsm_datagram_queue);
datagram->state = EC_DATAGRAM_QUEUED;
#ifdef EC_HAVE_CYCLES
datagram->cycles_sent = get_cycles();
#endif
datagram->jiffies_sent = jiffies;
- master->fsm.idle = 0;
- up(&master->io_sem);
+ ec_mutex_unlock(&master->fsm_queue_mutex);
+ if (master->fsm_queue_unlock_cb)
+ master->fsm_queue_unlock_cb(master->fsm_queue_locking_data);
}
/*****************************************************************************/
@@ -839,19 +859,6 @@
datagram->state = EC_DATAGRAM_QUEUED;
}
-/*****************************************************************************/
-
-/** Places a datagram in the non-application datagram queue.
- */
-void ec_master_queue_datagram_ext(
- ec_master_t *master, /**< EtherCAT master */
- ec_datagram_t *datagram /**< datagram */
- )
-{
- down(&master->ext_queue_sem);
- list_add_tail(&datagram->queue, &master->ext_datagram_queue);
- up(&master->ext_queue_sem);
-}
/*****************************************************************************/
@@ -862,7 +869,7 @@
{
ec_datagram_t *datagram, *next;
size_t datagram_size;
- uint8_t *frame_data, *cur_data;
+ uint8_t *frame_data, *cur_data, *frame_datagram_data;
void *follows_word;
#ifdef EC_HAVE_CYCLES
cycles_t cycles_start, cycles_sent, cycles_end;
@@ -870,6 +877,7 @@
unsigned long jiffies_sent;
unsigned int frame_count, more_datagrams_waiting;
struct list_head sent_datagrams;
+ ec_fmmu_config_t* domain_fmmu;
#ifdef EC_HAVE_CYCLES
cycles_start = get_cycles();
@@ -901,8 +909,8 @@
list_add_tail(&datagram->sent, &sent_datagrams);
datagram->index = master->datagram_index++;
- EC_MASTER_DBG(master, 2, "adding datagram 0x%02X\n",
- datagram->index);
+ EC_MASTER_DBG(master, 2, "adding datagram %p i=0x%02X size=%zu\n",datagram,
+ datagram->index,datagram_size);
// set "datagram following" flag in previous frame
if (follows_word)
@@ -918,7 +926,28 @@
cur_data += EC_DATAGRAM_HEADER_SIZE;
// EtherCAT datagram data
- memcpy(cur_data, datagram->data, datagram->data_size);
+ frame_datagram_data = cur_data;
+ if (datagram->domain) {
+ unsigned int datagram_address = EC_READ_U32(datagram->address);
+ int i = 0;
+ uint8_t *domain_data = datagram->data;
+ list_for_each_entry(domain_fmmu, &datagram->domain->fmmu_configs, list) {
+ if (domain_fmmu->dir == EC_DIR_OUTPUT ) {
+ unsigned int frame_offset = domain_fmmu->logical_start_address-datagram_address;
+ memcpy(frame_datagram_data+frame_offset, domain_data, domain_fmmu->data_size);
+ if (unlikely(master->debug_level > 1)) {
+ EC_DBG("sending dg %p i=0x%02X fmmu %u fp=%u dp=%zu size=%u\n",
+ datagram,datagram->index, i,frame_offset,domain_data-datagram->data,domain_fmmu->data_size);
+ ec_print_data(domain_data, domain_fmmu->data_size);
+ }
+ }
+ domain_data += domain_fmmu->data_size;
+ ++i;
+ }
+ }
+ else {
+ memcpy(frame_datagram_data, datagram->data, datagram->data_size);
+ }
cur_data += datagram->data_size;
// EtherCAT datagram footer
@@ -988,8 +1017,9 @@
size_t frame_size, data_size;
uint8_t datagram_type, datagram_index;
unsigned int cmd_follows, matched;
- const uint8_t *cur_data;
+ const uint8_t *cur_data, *frame_datagram_data;
ec_datagram_t *datagram;
+ ec_fmmu_config_t* domain_fmmu;
if (unlikely(size < EC_FRAME_HEADER_SIZE)) {
if (master->debug_level) {
@@ -1072,9 +1102,30 @@
cur_data += data_size + EC_DATAGRAM_FOOTER_SIZE;
continue;
}
-
- // copy received data into the datagram memory
- memcpy(datagram->data, cur_data, data_size);
+ frame_datagram_data = cur_data;
+ if (datagram->domain) {
+ size_t datagram_address = EC_READ_U32(datagram->address);
+ int i = 0;
+ uint8_t *domain_data = datagram->data;
+ list_for_each_entry(domain_fmmu, &datagram->domain->fmmu_configs, list) {
+ if (domain_fmmu->dir == EC_DIR_INPUT ) {
+ unsigned int frame_offset = domain_fmmu->logical_start_address-datagram_address;
+ memcpy(domain_data, frame_datagram_data+frame_offset, domain_fmmu->data_size);
+ if (unlikely(master->debug_level > 1)) {
+ EC_DBG("receiving dg %p i=0x%02X fmmu %u fp=%u dp=%zu size=%u\n",
+ datagram,datagram->index, i,
+ frame_offset,domain_data-datagram->data,domain_fmmu->data_size);
+ ec_print_data(domain_data, domain_fmmu->data_size);
+ }
+ }
+ domain_data += domain_fmmu->data_size;
+ ++i;
+ }
+ }
+ else {
+ // copy received data into the datagram memory
+ memcpy(datagram->data, frame_datagram_data, data_size);
+ }
cur_data += data_size;
// set the datagram's working counter
@@ -1087,6 +1138,8 @@
datagram->cycles_received = master->main_device.cycles_poll;
#endif
datagram->jiffies_received = master->main_device.jiffies_poll;
+ EC_MASTER_DBG(master, 2, "removing datagram %p i=0x%02X\n",datagram,
+ datagram->index);
list_del_init(&datagram->queue);
}
}
@@ -1208,9 +1261,7 @@
{
ec_master_t *master = (ec_master_t *) priv_data;
ec_slave_t *slave = NULL;
- int fsm_exec;
size_t sent_bytes;
-
// send interval in IDLE phase
ec_master_set_send_interval(master, 1000000 / HZ);
@@ -1222,32 +1273,33 @@
ec_datagram_output_stats(&master->fsm_datagram);
// receive
- down(&master->io_sem);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_receive(master);
- up(&master->io_sem);
-
- fsm_exec = 0;
+ ec_mutex_unlock(&master->io_mutex);
+
// execute master & slave state machines
- if (down_interruptible(&master->master_sem))
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
break;
- fsm_exec = ec_fsm_master_exec(&master->fsm);
+ if (ec_fsm_master_exec(&master->fsm)) {
+ ec_master_mbox_queue_datagrams(master, &master->fsm_mbox);
+ }
for (slave = master->slaves;
slave < master->slaves + master->slave_count;
slave++) {
- ec_fsm_slave_exec(&slave->fsm);
- }
- up(&master->master_sem);
+ ec_fsm_slave_exec(&slave->fsm); // may queue datagram in fsm queue
+ }
+#if defined(EC_EOE)
+ if (!ec_master_eoe_processing(master))
+ master->fsm.idle = 0; // pump the bus as fast as possible
+#endif
+ ec_mutex_unlock(&master->master_mutex);
// queue and send
- down(&master->io_sem);
- if (fsm_exec) {
- ec_master_queue_datagram(master, &master->fsm_datagram);
- }
- ec_master_inject_external_datagrams(master);
+ ec_mutex_lock(&master->io_mutex);
ecrt_master_send(master);
sent_bytes = master->main_device.tx_skb[
master->main_device.tx_ring_index]->len;
- up(&master->io_sem);
+ ec_mutex_unlock(&master->io_mutex);
if (ec_fsm_master_idle(&master->fsm)) {
#ifdef EC_USE_HRTIMER
@@ -1278,7 +1330,6 @@
{
ec_master_t *master = (ec_master_t *) priv_data;
ec_slave_t *slave = NULL;
- int fsm_exec;
EC_MASTER_DBG(master, 1, "Operation thread running"
" with fsm interval = %u us, max data size=%zu\n",
@@ -1287,26 +1338,23 @@
while (!kthread_should_stop()) {
ec_datagram_output_stats(&master->fsm_datagram);
- if (master->injection_seq_rt == master->injection_seq_fsm) {
- // output statistics
- ec_master_output_stats(master);
-
- fsm_exec = 0;
- // execute master & slave state machines
- if (down_interruptible(&master->master_sem))
- break;
- fsm_exec += ec_fsm_master_exec(&master->fsm);
- for (slave = master->slaves;
- slave < master->slaves + master->slave_count;
- slave++) {
- ec_fsm_slave_exec(&slave->fsm);
- }
- up(&master->master_sem);
-
- // inject datagrams (let the rt thread queue them, see ecrt_master_send)
- if (fsm_exec)
- master->injection_seq_fsm++;
- }
+ // output statistics
+ ec_master_output_stats(master);
+
+ // execute master & slave state machines
+ if (ec_mutex_lock_interruptible(&master->master_mutex))
+ break;
+ if (ec_fsm_master_exec(&master->fsm))
+ ec_master_mbox_queue_datagrams(master, &master->fsm_mbox);
+ for (slave = master->slaves;
+ slave < master->slaves + master->slave_count;
+ slave++) {
+ ec_fsm_slave_exec(&slave->fsm); // may queue datagram in fsm queue
+ }
+#if defined(EC_EOE)
+ ec_master_eoe_processing(master);
+#endif
+ ec_mutex_unlock(&master->master_mutex);
#ifdef EC_USE_HRTIMER
// the op thread should not work faster than the sending RT thread
@@ -1329,119 +1377,48 @@
/*****************************************************************************/
#ifdef EC_EOE
-/** Starts Ethernet over EtherCAT processing on demand.
- */
-void ec_master_eoe_start(ec_master_t *master /**< EtherCAT master */)
-{
- struct sched_param param = { .sched_priority = 0 };
-
- if (master->eoe_thread) {
- EC_MASTER_WARN(master, "EoE already running!\n");
- return;
- }
-
- if (list_empty(&master->eoe_handlers))
- return;
-
- if (!master->send_cb || !master->receive_cb) {
- EC_MASTER_WARN(master, "No EoE processing"
- " because of missing callbacks!\n");
- return;
- }
-
- EC_MASTER_INFO(master, "Starting EoE thread.\n");
- master->eoe_thread = kthread_run(ec_master_eoe_thread, master,
- "EtherCAT-EoE");
- if (IS_ERR(master->eoe_thread)) {
- int err = (int) PTR_ERR(master->eoe_thread);
- EC_MASTER_ERR(master, "Failed to start EoE thread (error %i)!\n",
- err);
- master->eoe_thread = NULL;
- return;
- }
-
- sched_setscheduler(master->eoe_thread, SCHED_NORMAL, ¶m);
- set_user_nice(master->eoe_thread, 0);
-}
-
-/*****************************************************************************/
-
-/** Stops the Ethernet over EtherCAT processing.
- */
-void ec_master_eoe_stop(ec_master_t *master /**< EtherCAT master */)
-{
- if (master->eoe_thread) {
- EC_MASTER_INFO(master, "Stopping EoE thread.\n");
-
- kthread_stop(master->eoe_thread);
- master->eoe_thread = NULL;
- EC_MASTER_INFO(master, "EoE thread exited.\n");
- }
-}
/*****************************************************************************/
/** Does the Ethernet over EtherCAT processing.
*/
-static int ec_master_eoe_thread(void *priv_data)
-{
- ec_master_t *master = (ec_master_t *) priv_data;
+static int ec_master_eoe_processing(ec_master_t *master)
+{
ec_eoe_t *eoe;
unsigned int none_open, sth_to_send, all_idle;
-
- EC_MASTER_DBG(master, 1, "EoE thread running.\n");
-
- while (!kthread_should_stop()) {
- none_open = 1;
- all_idle = 1;
-
+ none_open = 1;
+ all_idle = 1;
+
+ list_for_each_entry(eoe, &master->eoe_handlers, list) {
+ if (ec_eoe_is_open(eoe)) {
+ none_open = 0;
+ break;
+ }
+ }
+ if (none_open)
+ return all_idle;
+
+ // actual EoE processing
+ sth_to_send = 0;
+ list_for_each_entry(eoe, &master->eoe_handlers, list) {
+ ec_eoe_run(eoe);
+ if (eoe->queue_datagram) {
+ sth_to_send = 1;
+ }
+ if (!ec_eoe_is_idle(eoe)) {
+ all_idle = 0;
+ }
+ }
+
+ if (sth_to_send) {
list_for_each_entry(eoe, &master->eoe_handlers, list) {
- if (ec_eoe_is_open(eoe)) {
- none_open = 0;
- break;
- }
- }
- if (none_open)
- goto schedule;
-
- // receive datagrams
- master->receive_cb(master->cb_data);
-
- // actual EoE processing
- sth_to_send = 0;
- list_for_each_entry(eoe, &master->eoe_handlers, list) {
- ec_eoe_run(eoe);
- if (eoe->queue_datagram) {
- sth_to_send = 1;
- }
- if (!ec_eoe_is_idle(eoe)) {
- all_idle = 0;
- }
- }
-
- if (sth_to_send) {
- list_for_each_entry(eoe, &master->eoe_handlers, list) {
- ec_eoe_queue(eoe);
- }
- // (try to) send datagrams
- down(&master->ext_queue_sem);
- master->send_cb(master->cb_data);
- up(&master->ext_queue_sem);
- }
-
-schedule:
- if (all_idle) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- } else {
- schedule();
- }
- }
-
- EC_MASTER_DBG(master, 1, "EoE thread exiting...\n");
- return 0;
-}
-#endif
+ ec_eoe_queue(eoe);
+ }
+ }
+ return all_idle;
+}
+
+#endif // EC_EOE
/*****************************************************************************/
@@ -1636,6 +1613,20 @@
EC_FIND_DOMAIN;
}
+/** Wrapper Function for external usage
+ *
+ * \return Domain pointer, or \a NULL if not found.
+ */
+ec_domain_t *ecrt_master_find_domain(
+ ec_master_t *master, /**< EtherCAT master. */
+ unsigned int index /**< Domain index. */
+ )
+{
+ return ec_master_find_domain(
+ master,
+ index);
+}
+
/** Get a domain via its position in the list.
*
* Const version.
@@ -1767,7 +1758,8 @@
slave->ports[0].next_slave = port0_slave;
- for (i = 1; i < EC_MAX_PORTS; i++) {
+ i = 3;
+ while (i != 0) {
if (!slave->ports[i].link.loop_closed) {
*slave_position = *slave_position + 1;
if (*slave_position < master->slave_count) {
@@ -1780,6 +1772,14 @@
return -1;
}
}
+ switch (i)
+ {
+ case 0: i = 3; break;
+ case 1: i = 2; break;
+ case 3: i = 1; break;
+ case 2:
+ default:i = 0; break;
+ }
}
return 0;
@@ -1893,7 +1893,7 @@
return ERR_PTR(-ENOMEM);
}
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
if (list_empty(&master->domains)) {
index = 0;
@@ -1905,7 +1905,7 @@
ec_domain_init(domain, master, index);
list_add_tail(&domain->list, &master->domains);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_DBG(master, 1, "Created domain %u.\n", domain->index);
@@ -1929,9 +1929,6 @@
uint32_t domain_offset;
ec_domain_t *domain;
int ret;
-#ifdef EC_EOE
- int eoe_was_running;
-#endif
EC_MASTER_DBG(master, 1, "ecrt_master_activate(master = 0x%p)\n", master);
@@ -1940,44 +1937,35 @@
return 0;
}
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
// finish all domains
domain_offset = 0;
list_for_each_entry(domain, &master->domains, list) {
ret = ec_domain_finish(domain, domain_offset);
if (ret < 0) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Failed to finish domain 0x%p!\n", domain);
return ret;
}
domain_offset += domain->data_size;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
// restart EoE process and master thread with new locking
ec_master_thread_stop(master);
-#ifdef EC_EOE
- eoe_was_running = master->eoe_thread != NULL;
- ec_master_eoe_stop(master);
-#endif
EC_MASTER_DBG(master, 1, "FSM datagram is %p.\n", &master->fsm_datagram);
master->injection_seq_fsm = 0;
master->injection_seq_rt = 0;
- master->send_cb = master->app_send_cb;
- master->receive_cb = master->app_receive_cb;
- master->cb_data = master->app_cb_data;
+ master->fsm_queue_lock_cb = master->app_fsm_queue_lock_cb;
+ master->fsm_queue_unlock_cb = master->app_fsm_queue_unlock_cb;
+ master->fsm_queue_locking_data = master->app_fsm_queue_locking_data;
-#ifdef EC_EOE
- if (eoe_was_running) {
- ec_master_eoe_start(master);
- }
-#endif
ret = ec_master_thread_start(master, ec_master_operation_thread,
"EtherCAT-OP");
if (ret < 0) {
@@ -2002,7 +1990,7 @@
ec_slave_t *slave;
#ifdef EC_EOE
ec_eoe_t *eoe;
- int eoe_was_running;
+ int is_eoe_slave;
#endif
EC_MASTER_DBG(master, 1, "%s(master = 0x%p)\n", __func__, master);
@@ -2013,14 +2001,10 @@
}
ec_master_thread_stop(master);
-#ifdef EC_EOE
- eoe_was_running = master->eoe_thread != NULL;
- ec_master_eoe_stop(master);
-#endif
- master->send_cb = ec_master_internal_send_cb;
- master->receive_cb = ec_master_internal_receive_cb;
- master->cb_data = master;
+ master->fsm_queue_lock_cb = NULL;
+ master->fsm_queue_unlock_cb= NULL;
+ master->fsm_queue_locking_data = NULL;
ec_master_clear_config(master);
@@ -2028,32 +2012,35 @@
slave < master->slaves + master->slave_count;
slave++) {
- // set states for all slaves
+ // set state to PREOP for all but eoe slaves
+#ifdef EC_EOE
+ is_eoe_slave = 0;
+ // ... but leave EoE slaves in OP
+ list_for_each_entry(eoe, &master->eoe_handlers, list) {
+ if (slave == eoe->slave && ec_eoe_is_open(eoe))
+ is_eoe_slave = 1;
+ }
+ if (!is_eoe_slave) {
+ ec_slave_request_state(slave, EC_SLAVE_STATE_PREOP);
+ // mark for reconfiguration, because the master could have no
+ // possibility for a reconfiguration between two sequential operation
+ // phases.
+ slave->force_config = 1;
+ }
+#else
ec_slave_request_state(slave, EC_SLAVE_STATE_PREOP);
-
// mark for reconfiguration, because the master could have no
// possibility for a reconfiguration between two sequential operation
// phases.
slave->force_config = 1;
- }
-
-#ifdef EC_EOE
- // ... but leave EoE slaves in OP
- list_for_each_entry(eoe, &master->eoe_handlers, list) {
- if (ec_eoe_is_open(eoe))
- ec_slave_request_state(eoe->slave, EC_SLAVE_STATE_OP);
- }
-#endif
+#endif
+
+ }
master->app_time = 0ULL;
master->app_start_time = 0ULL;
master->has_app_time = 0;
-#ifdef EC_EOE
- if (eoe_was_running) {
- ec_master_eoe_start(master);
- }
-#endif
if (ec_master_thread_start(master, ec_master_idle_thread,
"EtherCAT-IDLE"))
EC_MASTER_WARN(master, "Failed to restart master thread!\n");
@@ -2067,18 +2054,13 @@
void ecrt_master_send(ec_master_t *master)
{
- ec_datagram_t *datagram, *n;
-
- if (master->injection_seq_rt != master->injection_seq_fsm) {
- // inject datagrams produced by master & slave FSMs
- ec_master_queue_datagram(master, &master->fsm_datagram);
- master->injection_seq_rt = master->injection_seq_fsm;
- }
- ec_master_inject_external_datagrams(master);
+ ec_datagram_t *datagram, *next;
+
+ ec_master_inject_fsm_datagrams(master);
if (unlikely(!master->main_device.link_state)) {
// link is down, no datagram can be sent
- list_for_each_entry_safe(datagram, n, &master->datagram_queue, queue) {
+ list_for_each_entry_safe(datagram, next, &master->datagram_queue, queue) {
datagram->state = EC_DATAGRAM_ERROR;
list_del_init(&datagram->queue);
}
@@ -2137,20 +2119,6 @@
}
}
-/*****************************************************************************/
-
-void ecrt_master_send_ext(ec_master_t *master)
-{
- ec_datagram_t *datagram, *next;
-
- list_for_each_entry_safe(datagram, next, &master->ext_datagram_queue,
- queue) {
- list_del(&datagram->queue);
- ec_master_queue_datagram(master, datagram);
- }
-
- ecrt_master_send(master);
-}
/*****************************************************************************/
@@ -2199,14 +2167,14 @@
ec_slave_config_init(sc, master,
alias, position, vendor_id, product_code);
- down(&master->master_sem);
+ ec_mutex_lock(&master->master_mutex);
// try to find the addressed slave
ec_slave_config_attach(sc);
ec_slave_config_load_default_sync_config(sc);
list_add_tail(&sc->list, &master->configs);
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
}
return sc;
@@ -2244,7 +2212,7 @@
{
const ec_slave_t *slave;
- if (down_interruptible(&master->master_sem)) {
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
return -EINTR;
}
@@ -2267,7 +2235,7 @@
slave_info->name[0] = 0;
}
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
return 0;
}
@@ -2275,16 +2243,18 @@
/*****************************************************************************/
void ecrt_master_callbacks(ec_master_t *master,
- void (*send_cb)(void *), void (*receive_cb)(void *), void *cb_data)
-{
- EC_MASTER_DBG(master, 1, "ecrt_master_callbacks(master = 0x%p,"
- " send_cb = 0x%p, receive_cb = 0x%p, cb_data = 0x%p)\n",
- master, send_cb, receive_cb, cb_data);
-
- master->app_send_cb = send_cb;
- master->app_receive_cb = receive_cb;
- master->app_cb_data = cb_data;
-}
+ void (*lock_cb)(void *), void (*unlock_cb)(void *),
+ void *cb_data)
+{
+ EC_MASTER_DBG(master, 1,"ecrt_master_callbacks(master = %p, "
+ "lock_cb = %p, unlock_cb = %p, cb_data = %p)\n",
+ master, lock_cb, unlock_cb, cb_data);
+
+ master->app_fsm_queue_lock_cb = lock_cb;
+ master->app_fsm_queue_unlock_cb = unlock_cb;
+ master->app_fsm_queue_locking_data = cb_data;
+}
+
/*****************************************************************************/
@@ -2297,12 +2267,36 @@
/*****************************************************************************/
+void ecrt_master_configured_slaves_state(const ec_master_t *master, ec_master_state_t *state)
+{
+ const ec_slave_config_t *sc;
+ ec_slave_config_state_t sc_state;
+
+ // collect al_states of all configured online slaves
+ state->al_states = 0;
+ list_for_each_entry(sc, &master->configs, list) {
+ ecrt_slave_config_state(sc,&sc_state);
+ if (sc_state.online)
+ state->al_states |= sc_state.al_state;
+ }
+
+ state->slaves_responding = master->fsm.slaves_responding;
+ state->link_up = master->main_device.link_state;
+}
+
+/*****************************************************************************/
+
void ecrt_master_application_time(ec_master_t *master, uint64_t app_time)
{
master->app_time = app_time;
if (unlikely(!master->has_app_time)) {
- master->app_start_time = app_time;
+ EC_MASTER_DBG(master, 1, "set application start time = %llu\n",app_time);
+ master->app_start_time = app_time;
+#ifdef EC_HAVE_CYCLES
+ master->dc_cycles_app_start_time = get_cycles();
+#endif
+ master->dc_jiffies_app_start_time = jiffies;
master->has_app_time = 1;
}
}
@@ -2348,7 +2342,7 @@
uint8_t drive_no, uint16_t idn, uint8_t *data, size_t data_size,
uint16_t *error_code)
{
- ec_master_soe_request_t request;
+ ec_master_soe_request_t* request;
int retval;
if (drive_no > 7) {
@@ -2356,63 +2350,61 @@
return -EINVAL;
}
- INIT_LIST_HEAD(&request.list);
- ec_soe_request_init(&request.req);
- ec_soe_request_set_drive_no(&request.req, drive_no);
- ec_soe_request_set_idn(&request.req, idn);
-
- if (ec_soe_request_alloc(&request.req, data_size)) {
- ec_soe_request_clear(&request.req);
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
return -ENOMEM;
- }
-
- memcpy(request.req.data, data, data_size);
- request.req.data_size = data_size;
- ec_soe_request_write(&request.req);
-
- if (down_interruptible(&master->master_sem))
+ kref_init(&request->refcount);
+
+ INIT_LIST_HEAD(&request->list);
+ ec_soe_request_init(&request->req);
+ ec_soe_request_set_drive_no(&request->req, drive_no);
+ ec_soe_request_set_idn(&request->req, idn);
+
+ if (ec_soe_request_alloc(&request->req, data_size)) {
+ ec_soe_request_clear(&request->req);
+ kref_put(&request->refcount,ec_master_soe_request_release);
+ return -ENOMEM;
+ }
+
+ memcpy(request->req.data, data, data_size);
+ request->req.data_size = data_size;
+ ec_soe_request_write(&request->req);
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_soe_request_release);
return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(
+ }
+
+ if (!(request->slave = ec_master_find_slave(
master, 0, slave_position))) {
- up(&master->master_sem);
+ ec_mutex_unlock(&master->master_mutex);
EC_MASTER_ERR(master, "Slave %u does not exist!\n",
slave_position);
- ec_soe_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_soe_request_release);
return -EINVAL;
}
- EC_SLAVE_DBG(request.slave, 1, "Scheduling SoE write request.\n");
+ EC_SLAVE_DBG(request->slave, 1, "Scheduled SoE write request %p.\n",request);
// schedule SoE write request.
- list_add_tail(&request.list, &request.slave->soe_requests);
-
- up(&master->master_sem);
+ list_add_tail(&request->list, &request->slave->soe_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->soe_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
- // interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- // abort request
- list_del(&request.list);
- up(&master->master_sem);
- ec_soe_request_clear(&request.req);
- return -EINTR;
- }
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->soe_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
+ if (wait_event_interruptible(request->slave->soe_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
+ // interrupted by signal
+ kref_put(&request->refcount,ec_master_soe_request_release);
+ return -EINTR;
+ }
if (error_code) {
- *error_code = request.req.error_code;
- }
- retval = request.req.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
- ec_soe_request_clear(&request.req);
+ *error_code = request->req.error_code;
+ }
+ retval = request->req.state == EC_INT_REQUEST_SUCCESS ? 0 : -EIO;
+ kref_put(&request->refcount,ec_master_soe_request_release);
return retval;
}
@@ -2423,78 +2415,76 @@
uint8_t drive_no, uint16_t idn, uint8_t *target, size_t target_size,
size_t *result_size, uint16_t *error_code)
{
- ec_master_soe_request_t request;
+ ec_master_soe_request_t* request;
if (drive_no > 7) {
EC_MASTER_ERR(master, "Invalid drive number!\n");
return -EINVAL;
}
- INIT_LIST_HEAD(&request.list);
- ec_soe_request_init(&request.req);
- ec_soe_request_set_drive_no(&request.req, drive_no);
- ec_soe_request_set_idn(&request.req, idn);
- ec_soe_request_read(&request.req);
-
- if (down_interruptible(&master->master_sem))
+ request = kmalloc(sizeof(*request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+ kref_init(&request->refcount);
+
+ INIT_LIST_HEAD(&request->list);
+ ec_soe_request_init(&request->req);
+ ec_soe_request_set_drive_no(&request->req, drive_no);
+ ec_soe_request_set_idn(&request->req, idn);
+ ec_soe_request_read(&request->req);
+
+ if (ec_mutex_lock_interruptible(&master->master_mutex)) {
+ kref_put(&request->refcount,ec_master_soe_request_release);
return -EINTR;
-
- if (!(request.slave = ec_master_find_slave(master, 0, slave_position))) {
- up(&master->master_sem);
- ec_soe_request_clear(&request.req);
+ }
+
+ if (!(request->slave = ec_master_find_slave(master, 0, slave_position))) {
+ ec_mutex_unlock(&master->master_mutex);
+ kref_put(&request->refcount,ec_master_soe_request_release);
EC_MASTER_ERR(master, "Slave %u does not exist!\n", slave_position);
return -EINVAL;
}
// schedule request.
- list_add_tail(&request.list, &request.slave->soe_requests);
-
- up(&master->master_sem);
-
- EC_SLAVE_DBG(request.slave, 1, "Scheduled SoE read request.\n");
+ list_add_tail(&request->list, &request->slave->soe_requests);
+ kref_get(&request->refcount);
+
+ ec_mutex_unlock(&master->master_mutex);
+
+ EC_SLAVE_DBG(request->slave, 1, "Scheduled SoE read request %p.\n",request);
// wait for processing through FSM
- if (wait_event_interruptible(request.slave->soe_queue,
- request.req.state != EC_INT_REQUEST_QUEUED)) {
- // interrupted by signal
- down(&master->master_sem);
- if (request.req.state == EC_INT_REQUEST_QUEUED) {
- list_del(&request.list);
- up(&master->master_sem);
- ec_soe_request_clear(&request.req);
- return -EINTR;
- }
- // request already processing: interrupt not possible.
- up(&master->master_sem);
- }
-
- // wait until master FSM has finished processing
- wait_event(request.slave->soe_queue,
- request.req.state != EC_INT_REQUEST_BUSY);
+ if (wait_event_interruptible(request->slave->soe_queue,
+ ((request->req.state == EC_INT_REQUEST_SUCCESS) || (request->req.state == EC_INT_REQUEST_FAILURE)))) {
+ // interrupted by signal
+ kref_put(&request->refcount,ec_master_soe_request_release);
+ return -EINTR;
+ }
if (error_code) {
- *error_code = request.req.error_code;
- }
-
- EC_SLAVE_DBG(request.slave, 1, "Read %zd bytes via SoE.\n",
- request.req.data_size);
-
- if (request.req.state != EC_INT_REQUEST_SUCCESS) {
+ *error_code = request->req.error_code;
+ }
+
+ EC_SLAVE_DBG(request->slave, 1, "SoE request %p read %zd bytes via SoE.\n",
+ request,request->req.data_size);
+
+ if (request->req.state != EC_INT_REQUEST_SUCCESS) {
if (result_size) {
*result_size = 0;
}
- ec_soe_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_soe_request_release);
return -EIO;
} else {
- if (request.req.data_size > target_size) {
+ if (request->req.data_size > target_size) {
EC_MASTER_ERR(master, "Buffer too small.\n");
- ec_soe_request_clear(&request.req);
+ kref_put(&request->refcount,ec_master_soe_request_release);
return -EOVERFLOW;
}
if (result_size) {
- *result_size = request.req.data_size;
- }
- memcpy(target, request.req.data, request.req.data_size);
+ *result_size = request->req.data_size;
+ }
+ memcpy(target, request->req.data, request->req.data_size);
+ kref_put(&request->refcount,ec_master_soe_request_release);
return 0;
}
}
@@ -2520,7 +2510,6 @@
EXPORT_SYMBOL(ecrt_master_activate);
EXPORT_SYMBOL(ecrt_master_deactivate);
EXPORT_SYMBOL(ecrt_master_send);
-EXPORT_SYMBOL(ecrt_master_send_ext);
EXPORT_SYMBOL(ecrt_master_receive);
EXPORT_SYMBOL(ecrt_master_callbacks);
EXPORT_SYMBOL(ecrt_master);
@@ -2535,7 +2524,7 @@
EXPORT_SYMBOL(ecrt_master_write_idn);
EXPORT_SYMBOL(ecrt_master_read_idn);
EXPORT_SYMBOL(ecrt_master_reset);
-
+EXPORT_SYMBOL(ecrt_master_find_domain);
/** \endcond */
/*****************************************************************************/
--- a/master/master.h Fri May 13 15:33:16 2011 +0200
+++ b/master/master.h Fri May 13 15:34:20 2011 +0200
@@ -43,18 +43,13 @@
#include <linux/wait.h>
#include <linux/kthread.h>
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
-#include <linux/semaphore.h>
-#else
-#include <asm/semaphore.h>
-#endif
-
#include "device.h"
#include "domain.h"
#include "ethernet.h"
#include "fsm_master.h"
#include "cdev.h"
+
/*****************************************************************************/
/** Convenience macro for printing master-specific information to syslog.
@@ -66,8 +61,16 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_MASTER_INFO(master, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT %u: " fmt, master->index, ##args); \
+ printk(KERN_INFO "EtherCAT %u: " fmt, master->index, ##args); \
+ } while (0)
+#else
#define EC_MASTER_INFO(master, fmt, args...) \
printk(KERN_INFO "EtherCAT %u: " fmt, master->index, ##args)
+#endif
/** Convenience macro for printing master-specific errors to syslog.
*
@@ -78,8 +81,16 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_MASTER_ERR(master, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT ERROR %u: " fmt, master->index, ##args); \
+ printk(KERN_ERR "EtherCAT ERROR %u: " fmt, master->index, ##args); \
+ } while (0)
+#else
#define EC_MASTER_ERR(master, fmt, args...) \
printk(KERN_ERR "EtherCAT ERROR %u: " fmt, master->index, ##args)
+#endif
/** Convenience macro for printing master-specific warnings to syslog.
*
@@ -90,8 +101,16 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_MASTER_WARN(master, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT WARNING %u: " fmt, master->index, ##args); \
+ printk(KERN_WARNING "EtherCAT WARNING %u: " fmt, master->index, ##args); \
+ } while (0)
+#else
#define EC_MASTER_WARN(master, fmt, args...) \
printk(KERN_WARNING "EtherCAT WARNING %u: " fmt, master->index, ##args)
+#endif
/** Convenience macro for printing master-specific debug messages to syslog.
*
@@ -102,13 +121,25 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
#define EC_MASTER_DBG(master, level, fmt, args...) \
do { \
+ __trace_printk(_THIS_IP_,"EtherCAT DEBUG%u %u: " fmt, \
+ level,master->index, ##args); \
if (master->debug_level >= level) { \
printk(KERN_DEBUG "EtherCAT DEBUG %u: " fmt, \
master->index, ##args); \
} \
} while (0)
+#else
+#define EC_MASTER_DBG(master, level, fmt, args...) \
+ do { \
+ if (master->debug_level >= level) { \
+ printk(KERN_DEBUG "EtherCAT DEBUG %u: " fmt, \
+ master->index, ##args); \
+ } \
+ } while (0)
+#endif
/*****************************************************************************/
@@ -152,16 +183,17 @@
struct class_device *class_device; /**< Master class device. */
#endif
- struct semaphore master_sem; /**< Master semaphore. */
+ struct ec_mutex_t master_mutex; /**< Master mutex. */
ec_device_t main_device; /**< EtherCAT main device. */
const uint8_t *main_mac; /**< MAC address of main device. */
ec_device_t backup_device; /**< EtherCAT backup device. */
const uint8_t *backup_mac; /**< MAC address of backup device. */
- struct semaphore device_sem; /**< Device semaphore. */
+ struct ec_mutex_t device_mutex; /**< Device mutex. */
ec_fsm_master_t fsm; /**< Master state machine. */
ec_datagram_t fsm_datagram; /**< Datagram used for state machines. */
+ ec_mailbox_t fsm_mbox; /**< Mailbox used for state machines. */
ec_master_phase_t phase; /**< Master phase. */
unsigned int active; /**< Master has been activated. */
unsigned int config_changed; /**< The configuration changed. */
@@ -187,10 +219,14 @@
ec_datagram_t sync_mon_datagram; /**< Datagram used for DC synchronisation
monitoring. */
ec_slave_t *dc_ref_clock; /**< DC reference clock slave. */
-
+#ifdef EC_HAVE_CYCLES
+ cycles_t dc_cycles_app_start_time; /** cycles at last ecrt_master_sync() call.*/
+#endif
+ unsigned long dc_jiffies_app_start_time;/** jiffies at last
+ ecrt_master_sync() call.*/
unsigned int scan_busy; /**< Current scan state. */
unsigned int allow_scan; /**< \a True, if slave scanning is allowed. */
- struct semaphore scan_sem; /**< Semaphore protecting the \a scan_busy
+ struct ec_mutex_t scan_mutex; /**< Mutex protecting the \a scan_busy
variable and the \a allow_scan flag. */
wait_queue_head_t scan_queue; /**< Queue for processes that wait for
slave scanning. */
@@ -198,7 +234,7 @@
unsigned int config_busy; /**< State of slave configuration. */
unsigned int allow_config; /**< \a True, if slave configuration is
allowed. */
- struct semaphore config_sem; /**< Semaphore protecting the \a config_busy
+ struct ec_mutex_t config_mutex; /**< Mutex protecting the \a config_busy
variable and the allow_config flag. */
wait_queue_head_t config_queue; /**< Queue for processes that wait for
slave configuration. */
@@ -206,12 +242,10 @@
struct list_head datagram_queue; /**< Datagram queue. */
uint8_t datagram_index; /**< Current datagram index. */
- struct list_head ext_datagram_queue; /**< Queue for non-application
- datagrams. */
- struct semaphore ext_queue_sem; /**< Semaphore protecting the \a
- ext_datagram_queue. */
-
- struct list_head external_datagram_queue; /**< External Datagram queue. */
+ struct ec_mutex_t fsm_queue_mutex; /**< Mutex protecting the \a
+ fsm_datagram_queue. */
+ struct list_head fsm_datagram_queue; /**< External Datagram queue. */
+
unsigned int send_interval; /**< Interval between calls to ecrt_master_send */
size_t max_queue_size; /**< Maximum size of datagram queue */
@@ -225,16 +259,14 @@
struct list_head eoe_handlers; /**< Ethernet over EtherCAT handlers. */
#endif
- struct semaphore io_sem; /**< Semaphore used in \a IDLE phase. */
-
- void (*send_cb)(void *); /**< Current send datagrams callback. */
- void (*receive_cb)(void *); /**< Current receive datagrams callback. */
- void *cb_data; /**< Current callback data. */
- void (*app_send_cb)(void *); /**< Application's send datagrams
- callback. */
- void (*app_receive_cb)(void *); /**< Application's receive datagrams
- callback. */
- void *app_cb_data; /**< Application callback data. */
+ struct ec_mutex_t io_mutex; /**< Mutex used in \a IDLE phase. */
+
+ void (*fsm_queue_lock_cb)(void *); /**< FSM queue lock callback. */
+ void (*fsm_queue_unlock_cb)(void *); /**< FSM queue unlock callback. */
+ void *fsm_queue_locking_data; /**< Data parameter of fsm queue locking callbacks. */
+ void (*app_fsm_queue_lock_cb)(void *); /**< App's FSM queue lock callback. */
+ void (*app_fsm_queue_unlock_cb)(void *); /**< App's FSM queue unlock callback. */
+ void *app_fsm_queue_locking_data; /**< App's data parameter of fsm queue locking callbacks. */
struct list_head sii_requests; /**< SII write requests. */
wait_queue_head_t sii_queue; /**< Wait queue for SII
@@ -260,18 +292,12 @@
int ec_master_enter_operation_phase(ec_master_t *);
void ec_master_leave_operation_phase(ec_master_t *);
-#ifdef EC_EOE
-// EoE
-void ec_master_eoe_start(ec_master_t *);
-void ec_master_eoe_stop(ec_master_t *);
-#endif
-
// datagram IO
void ec_master_receive_datagrams(ec_master_t *, const uint8_t *, size_t);
void ec_master_queue_datagram(ec_master_t *, ec_datagram_t *);
-void ec_master_queue_datagram_ext(ec_master_t *, ec_datagram_t *);
-void ec_master_queue_external_datagram(ec_master_t *, ec_datagram_t *);
-void ec_master_inject_external_datagrams(ec_master_t *);
+void ec_master_queue_request_fsm_datagram(ec_master_t *, ec_datagram_t *);
+void ec_master_queue_fsm_datagram(ec_master_t *, ec_datagram_t *);
+void ec_master_inject_fsm_datagrams(ec_master_t *);
// misc.
void ec_master_set_send_interval(ec_master_t *, unsigned int);
@@ -308,9 +334,6 @@
void ec_master_calc_dc(ec_master_t *);
void ec_master_request_op(ec_master_t *);
-void ec_master_internal_send_cb(void *);
-void ec_master_internal_receive_cb(void *);
-
-/*****************************************************************************/
-
-#endif
+/*****************************************************************************/
+
+#endif
--- a/master/module.c Fri May 13 15:33:16 2011 +0200
+++ b/master/module.c Fri May 13 15:34:20 2011 +0200
@@ -61,7 +61,7 @@
static unsigned int debug_level; /**< Debug level parameter. */
static ec_master_t *masters; /**< Array of masters. */
-static struct semaphore master_sem; /**< Master semaphore. */
+static struct ec_mutex_t master_mutex; /**< Master mutex. */
dev_t device_number; /**< Device number for master cdevs. */
struct class *class; /**< Device class. */
@@ -101,7 +101,7 @@
EC_INFO("Master driver %s\n", EC_MASTER_VERSION);
- sema_init(&master_sem, 1);
+ ec_mutex_init(&master_mutex);
if (master_count) {
if (alloc_chrdev_region(&device_number,
@@ -468,9 +468,9 @@
for (i = 0; i < master_count; i++) {
master = &masters[i];
- down(&master->device_sem);
+ ec_mutex_lock(&master->device_mutex);
if (master->main_device.dev) { // master already has a device
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
continue;
}
@@ -481,14 +481,14 @@
str, master->index);
ec_device_attach(&master->main_device, net_dev, poll, module);
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
snprintf(net_dev->name, IFNAMSIZ, "ec%u", master->index);
return &master->main_device; // offer accepted
}
else {
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
if (master->debug_level) {
ec_mac_print(net_dev->dev_addr, str);
@@ -524,40 +524,40 @@
}
master = &masters[master_index];
- if (down_interruptible(&master_sem)) {
+ if (ec_mutex_lock_interruptible(&master_mutex)) {
errptr = ERR_PTR(-EINTR);
goto out_return;
}
if (master->reserved) {
- up(&master_sem);
+ ec_mutex_unlock(&master_mutex);
EC_MASTER_ERR(master, "Master already in use!\n");
errptr = ERR_PTR(-EBUSY);
goto out_return;
}
master->reserved = 1;
- up(&master_sem);
-
- if (down_interruptible(&master->device_sem)) {
+ ec_mutex_unlock(&master_mutex);
+
+ if (ec_mutex_lock_interruptible(&master->device_mutex)) {
errptr = ERR_PTR(-EINTR);
goto out_release;
}
if (master->phase != EC_IDLE) {
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
EC_MASTER_ERR(master, "Master still waiting for devices!\n");
errptr = ERR_PTR(-ENODEV);
goto out_release;
}
if (!try_module_get(master->main_device.module)) {
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
EC_ERR("Device module is unloading!\n");
errptr = ERR_PTR(-ENODEV);
goto out_release;
}
- up(&master->device_sem);
+ ec_mutex_unlock(&master->device_mutex);
if (ec_master_enter_operation_phase(master)) {
EC_MASTER_ERR(master, "Failed to enter OPERATION phase!\n");
@@ -611,6 +611,37 @@
return ECRT_VERSION_MAGIC;
}
+
+
+/** Return pointer to running master
+/*****************************************************************************/
+ec_master_t *ecrt_attach_master(unsigned int master_index)
+{
+ ec_master_t *master = NULL;
+
+ EC_INFO("Requesting master %u...\n", master_index);
+
+ if (master_index >= master_count) {
+ EC_ERR("Invalid master index %u.\n", master_index);
+ return master;
+ }
+
+ master = &masters[master_index];
+ if (master->reserved)
+ {
+ // ok master is attached
+ EC_INFO("attaching Master %u!\n", master_index);
+ }
+ else
+ {
+ EC_ERR("No Master %u in use!\n", master_index);
+ master = NULL;
+ }
+ return master;
+}
+
+
+
/*****************************************************************************/
/** Global request state type translation table.
@@ -637,6 +668,7 @@
EXPORT_SYMBOL(ecrt_request_master);
EXPORT_SYMBOL(ecrt_release_master);
EXPORT_SYMBOL(ecrt_version_magic);
+EXPORT_SYMBOL(ecrt_attach_master);
/** \endcond */
--- a/master/slave.c Fri May 13 15:33:16 2011 +0200
+++ b/master/slave.c Fri May 13 15:34:20 2011 +0200
@@ -159,19 +159,20 @@
INIT_LIST_HEAD(&slave->soe_requests);
init_waitqueue_head(&slave->soe_queue);
- // init state machine datagram
- ec_datagram_init(&slave->fsm_datagram);
- snprintf(slave->fsm_datagram.name, EC_DATAGRAM_NAME_SIZE,
+ // init datagram
+ ec_datagram_init(&slave->datagram);
+ snprintf(slave->datagram.name, EC_DATAGRAM_NAME_SIZE,
"slave%u-fsm", slave->ring_position);
- ret = ec_datagram_prealloc(&slave->fsm_datagram, EC_MAX_DATA_SIZE);
+ ret = ec_datagram_prealloc(&slave->datagram, EC_MAX_DATA_SIZE);
if (ret < 0) {
- ec_datagram_clear(&slave->fsm_datagram);
+ ec_datagram_clear(&slave->datagram);
EC_SLAVE_ERR(slave, "Failed to allocate FSM datagram.\n");
return;
}
+ ec_mbox_init(&slave->mbox,&slave->datagram);
// create state machine object
- ec_fsm_slave_init(&slave->fsm, slave, &slave->fsm_datagram);
+ ec_fsm_slave_init(&slave->fsm, slave, &slave->mbox);
}
/*****************************************************************************/
@@ -194,9 +195,10 @@
list_entry(slave->slave_sdo_requests.next,
ec_master_sdo_request_t, list);
list_del_init(&request->list); // dequeue
- EC_SLAVE_WARN(slave, "Discarding SDO request,"
- " slave about to be deleted.\n");
+ EC_SLAVE_WARN(slave, "Discarding SDO request %p,"
+ " slave about to be deleted.\n",request);
request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_sdo_request_release);
wake_up(&slave->sdo_queue);
}
@@ -208,6 +210,7 @@
EC_SLAVE_WARN(slave, "Discarding FoE request,"
" slave about to be deleted.\n");
request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_foe_request_release);
wake_up(&slave->foe_queue);
}
@@ -219,6 +222,7 @@
EC_SLAVE_WARN(slave, "Discarding SoE request,"
" slave about to be deleted.\n");
request->req.state = EC_INT_REQUEST_FAILURE;
+ kref_put(&request->refcount,ec_master_soe_request_release);
wake_up(&slave->soe_queue);
}
@@ -252,7 +256,7 @@
if (slave->sii_words)
kfree(slave->sii_words);
ec_fsm_slave_clear(&slave->fsm);
- ec_datagram_clear(&slave->fsm_datagram);
+ ec_mbox_clear(&slave->mbox);
}
/*****************************************************************************/
@@ -803,6 +807,59 @@
/*****************************************************************************/
+/** returns the previous connected port of a given port.
+ */
+
+unsigned int ec_slave_get_previous_port(
+ ec_slave_t *slave, /**< EtherCAT slave. */
+ unsigned int i /**< Port index */
+ )
+{
+ do
+ {
+ switch (i)
+ {
+ case 0: i = 2; break;
+ case 1: i = 3; break;
+ case 2: i = 1; break;
+ case 3:
+ default:i = 0; break;
+ }
+ if (slave->ports[i].next_slave)
+ return i;
+ } while (i);
+ return 0;
+}
+
+/*****************************************************************************/
+
+/** returns the next connected port of a given port.
+ */
+
+unsigned int ec_slave_get_next_port(
+ ec_slave_t *slave, /**< EtherCAT slave. */
+ unsigned int i /**< Port index */
+ )
+{
+ do
+ {
+ switch (i)
+ {
+ case 0: i = 3; break;
+ case 1: i = 2; break;
+ case 3: i = 1; break;
+ case 2:
+ default:i = 0; break;
+ }
+ if (slave->ports[i].next_slave)
+ return i;
+ } while (i);
+ return 0;
+}
+
+
+/*****************************************************************************/
+
/** Calculates the sum of round-trip-times of connected ports 1-3.
*/
uint32_t ec_slave_calc_rtt_sum(
@@ -810,13 +867,11 @@
)
{
uint32_t rtt_sum = 0, rtt;
- unsigned int i;
-
- for (i = 1; i < EC_MAX_PORTS; i++) {
- if (slave->ports[i].next_slave) {
- rtt = slave->ports[i].receive_time - slave->ports[i - 1].receive_time;
- rtt_sum += rtt;
- }
+ unsigned int i = ec_slave_get_next_port(slave,0);
+ while (i != 0) {
+ rtt = slave->ports[i].receive_time - slave->ports[ec_slave_get_previous_port(slave,i)].receive_time;
+ rtt_sum += rtt;
+ i = ec_slave_get_next_port(slave,i);
}
return rtt_sum;
@@ -830,20 +885,21 @@
ec_slave_t *slave /**< EtherCAT slave. */
)
{
+ unsigned int i;
ec_slave_t *dc_slave = NULL;
if (slave->base_dc_supported) {
dc_slave = slave;
} else {
- unsigned int i;
-
- for (i = 1; i < EC_MAX_PORTS; i++) {
+ i = ec_slave_get_next_port(slave,0);
+ while (i != 0) {
ec_slave_t *next = slave->ports[i].next_slave;
if (next) {
dc_slave = ec_slave_find_next_dc_slave(next);
if (dc_slave)
break;
}
+ i = ec_slave_get_next_port(slave,i);
}
}
@@ -859,32 +915,30 @@
)
{
unsigned int i;
- ec_slave_t *next, *next_dc;
+ ec_slave_t *next_dc;
uint32_t rtt, next_rtt_sum;
if (!slave->base_dc_supported)
return;
- for (i = 1; i < EC_MAX_PORTS; i++) {
- next = slave->ports[i].next_slave;
- if (!next)
- continue;
- next_dc = ec_slave_find_next_dc_slave(next);
- if (!next_dc)
- continue;
-
- rtt = slave->ports[i].receive_time - slave->ports[i - 1].receive_time;
- next_rtt_sum = ec_slave_calc_rtt_sum(next_dc);
-
- slave->ports[i].delay_to_next_dc = (rtt - next_rtt_sum) / 2; // FIXME
- next_dc->ports[0].delay_to_next_dc = (rtt - next_rtt_sum) / 2;
+ i = ec_slave_get_next_port(slave,0);
+ while (i != 0) {
+ next_dc = ec_slave_find_next_dc_slave(slave->ports[i].next_slave);
+ if (next_dc) {
+ rtt = slave->ports[i].receive_time - slave->ports[ec_slave_get_previous_port(slave,i)].receive_time;
+ next_rtt_sum = ec_slave_calc_rtt_sum(next_dc);
+
+ slave->ports[i].delay_to_next_dc = (rtt - next_rtt_sum) / 2; // FIXME
+ next_dc->ports[0].delay_to_next_dc = (rtt - next_rtt_sum) / 2;
#if 0
- EC_SLAVE_DBG(slave, 1, "delay %u:%u rtt=%u"
- " next_rtt_sum=%u delay=%u\n",
- slave->ring_position, i, rtt, next_rtt_sum,
- slave->ports[i].delay_to_next_dc);
+ EC_SLAVE_DBG(slave, 1, "delay %u:%u rtt=%u"
+ " next_rtt_sum=%u delay=%u\n",
+ slave->ring_position, i, rtt, next_rtt_sum,
+ slave->ports[i].delay_to_next_dc);
#endif
+ }
+ i = ec_slave_get_next_port(slave,i);
}
}
@@ -898,28 +952,26 @@
)
{
unsigned int i;
- ec_slave_t *next, *next_dc;
-
-#if 0
+ ec_slave_t *next_dc;
+
+#if 1
EC_SLAVE_DBG(slave, 1, "%u\n", *delay);
#endif
slave->transmission_delay = *delay;
- for (i = 1; i < EC_MAX_PORTS; i++) {
+ i = ec_slave_get_next_port(slave,0);
+ while (i != 0) {
ec_slave_port_t *port = &slave->ports[i];
- next = port->next_slave;
- if (!next)
- continue;
- next_dc = ec_slave_find_next_dc_slave(next);
- if (!next_dc)
- continue;
-
- *delay = *delay + port->delay_to_next_dc;
+ next_dc = ec_slave_find_next_dc_slave(port->next_slave);
+ if (next_dc) {
+ *delay = *delay + port->delay_to_next_dc;
#if 0
- EC_SLAVE_DBG(slave, 1, "%u:%u %u\n", slave->ring_position, i, *delay);
+ EC_SLAVE_DBG(slave, 1, "%u:%u %u\n", slave->ring_position, i, *delay);
#endif
- ec_slave_calc_transmission_delays_rec(next_dc, delay);
+ ec_slave_calc_transmission_delays_rec(next_dc, delay);
+ }
+ i = ec_slave_get_next_port(slave,i);
}
*delay = *delay + slave->ports[0].delay_to_next_dc;
--- a/master/slave.h Fri May 13 15:33:16 2011 +0200
+++ b/master/slave.h Fri May 13 15:34:20 2011 +0200
@@ -46,6 +46,7 @@
#include "sync.h"
#include "sdo.h"
#include "fsm_slave.h"
+#include "mailbox.h"
/*****************************************************************************/
@@ -59,9 +60,19 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_SLAVE_INFO(slave, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT %u-%u: " fmt, slave->master->index, \
+ slave->ring_position, ##args); \
+ printk(KERN_INFO "EtherCAT %u-%u: " fmt, slave->master->index, \
+ slave->ring_position, ##args); \
+ } while (0)
+#else
#define EC_SLAVE_INFO(slave, fmt, args...) \
printk(KERN_INFO "EtherCAT %u-%u: " fmt, slave->master->index, \
slave->ring_position, ##args)
+#endif
/** Convenience macro for printing slave-specific errors to syslog.
*
@@ -73,9 +84,19 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_SLAVE_ERR(slave, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT ERROR %u-%u: " fmt, slave->master->index, \
+ slave->ring_position, ##args); \
+ printk(KERN_ERR "EtherCAT ERROR %u-%u: " fmt, slave->master->index, \
+ slave->ring_position, ##args); \
+ } while (0)
+#else
#define EC_SLAVE_ERR(slave, fmt, args...) \
printk(KERN_ERR "EtherCAT ERROR %u-%u: " fmt, slave->master->index, \
slave->ring_position, ##args)
+#endif
/** Convenience macro for printing slave-specific warnings to syslog.
*
@@ -87,9 +108,19 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
+#define EC_SLAVE_WARN(slave, fmt, args...) \
+ do { \
+ __trace_printk(_THIS_IP_,"EtherCAT WARNING %u-%u: " fmt, \
+ slave->master->index, slave->ring_position, ##args); \
+ printk(KERN_WARNING "EtherCAT WARNING %u-%u: " fmt, \
+ slave->master->index, slave->ring_position, ##args); \
+ } while (0)
+#else
#define EC_SLAVE_WARN(slave, fmt, args...) \
printk(KERN_WARNING "EtherCAT WARNING %u-%u: " fmt, \
slave->master->index, slave->ring_position, ##args)
+#endif
/** Convenience macro for printing slave-specific debug messages to syslog.
*
@@ -101,13 +132,25 @@
* \param fmt format string (like in printf())
* \param args arguments (optional)
*/
+#ifdef USE_TRACE_PRINTK
#define EC_SLAVE_DBG(slave, level, fmt, args...) \
do { \
+ __trace_printk(_THIS_IP_,"EtherCAT DEBUG%u %u-%u: " fmt, \
+ level,slave->master->index, slave->ring_position, ##args); \
if (slave->master->debug_level >= level) { \
printk(KERN_DEBUG "EtherCAT DEBUG %u-%u: " fmt, \
slave->master->index, slave->ring_position, ##args); \
} \
} while (0)
+#else
+#define EC_SLAVE_DBG(slave, level, fmt, args...) \
+ do { \
+ if (slave->master->debug_level >= level) { \
+ printk(KERN_DEBUG "EtherCAT DEBUG %u-%u: " fmt, \
+ slave->master->index, slave->ring_position, ##args); \
+ } \
+ } while (0)
+#endif
/*****************************************************************************/
@@ -232,7 +275,8 @@
wait_queue_head_t soe_queue; /**< Wait queue for SoE requests from user
space. */
ec_fsm_slave_t fsm; /**< Slave state machine. */
- ec_datagram_t fsm_datagram; /**< Datagram used for state machines. */
+ ec_datagram_t datagram; /** Datagram used for data transfers */
+ ec_mailbox_t mbox; /**< Mailbox used for data transfers. */
};
/*****************************************************************************/
--- a/master/slave_config.c Fri May 13 15:33:16 2011 +0200
+++ b/master/slave_config.c Fri May 13 15:34:20 2011 +0200
@@ -70,7 +70,7 @@
sc->product_code = product_code;
sc->watchdog_divider = 0; // use default
sc->watchdog_intervals = 0; // use default
-
+ sc->allow_overlapping_pdos = 0; // default not allowed
sc->slave = NULL;
for (i = 0; i < EC_MAX_SYNC_MANAGERS; i++)
@@ -164,12 +164,15 @@
{
unsigned int i;
ec_fmmu_config_t *fmmu;
+ ec_fmmu_config_t *prev_fmmu;
+ uint32_t fmmu_logical_start_address;
+ size_t tx_size, old_prev_tx_size;
// FMMU configuration already prepared?
for (i = 0; i < sc->used_fmmus; i++) {
fmmu = &sc->fmmu_configs[i];
if (fmmu->domain == domain && fmmu->sync_index == sync_index)
- return fmmu->logical_start_address;
+ return fmmu->domain_address;
}
if (sc->used_fmmus == EC_MAX_FMMUS) {
@@ -177,13 +180,29 @@
return -EOVERFLOW;
}
- fmmu = &sc->fmmu_configs[sc->used_fmmus++];
-
- down(&sc->master->master_sem);
- ec_fmmu_config_init(fmmu, sc, domain, sync_index, dir);
- up(&sc->master->master_sem);
-
- return fmmu->logical_start_address;
+ fmmu = &sc->fmmu_configs[sc->used_fmmus];
+
+ ec_mutex_lock(&sc->master->master_mutex);
+ ec_fmmu_config_init(fmmu, sc, sync_index, dir);
+ fmmu_logical_start_address = domain->tx_size;
+ tx_size = fmmu->data_size;
+ if (sc->allow_overlapping_pdos && sc->used_fmmus > 0) {
+ prev_fmmu = &sc->fmmu_configs[sc->used_fmmus-1];
+ if (fmmu->dir != prev_fmmu->dir && prev_fmmu->tx_size != 0) {
+ // prev fmmu has opposite direction
+ // and is not already paired with prev-prev fmmu
+ old_prev_tx_size = prev_fmmu->tx_size;
+ prev_fmmu->tx_size = max(fmmu->data_size,prev_fmmu->data_size);
+ domain->tx_size += prev_fmmu->tx_size - old_prev_tx_size;
+ tx_size = 0;
+ fmmu_logical_start_address = prev_fmmu->logical_start_address;
+ }
+ }
+ ec_fmmu_config_domain(fmmu,domain,fmmu_logical_start_address,tx_size);
+ ec_mutex_unlock(&sc->master->master_mutex);
+
+ ++sc->used_fmmus;
+ return fmmu->domain_address;
}
/*****************************************************************************/
@@ -227,8 +246,6 @@
slave->config = sc;
sc->slave = slave;
- ec_slave_request_state(slave, EC_SLAVE_STATE_OP);
-
EC_CONFIG_DBG(sc, 1, "Attached slave %u.\n", slave->ring_position);
return 0;
@@ -494,6 +511,18 @@
/*****************************************************************************/
+void ecrt_slave_config_overlapping_pdos(ec_slave_config_t *sc,
+ uint8_t allow_overlapping_pdos )
+{
+ if (sc->master->debug_level)
+ EC_DBG("%s(sc = 0x%p, allow_overlapping_pdos = %u)\n",
+ __func__, sc, allow_overlapping_pdos);
+
+ sc->allow_overlapping_pdos = allow_overlapping_pdos;
+}
+
+/*****************************************************************************/
+
int ecrt_slave_config_pdo_assign_add(ec_slave_config_t *sc,
uint8_t sync_index, uint16_t pdo_index)
{
@@ -507,18 +536,18 @@
return -EINVAL;
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
pdo = ec_pdo_list_add_pdo(&sc->sync_configs[sync_index].pdos, pdo_index);
if (IS_ERR(pdo)) {
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return PTR_ERR(pdo);
}
pdo->sync_index = sync_index;
ec_slave_config_load_default_mapping(sc, pdo);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return 0;
}
@@ -535,9 +564,9 @@
return;
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
ec_pdo_list_clear_pdos(&sc->sync_configs[sync_index].pdos);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
}
/*****************************************************************************/
@@ -563,10 +592,10 @@
break;
if (pdo) {
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
entry = ec_pdo_add_entry(pdo, entry_index, entry_subindex,
entry_bit_length);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
if (IS_ERR(entry))
retval = PTR_ERR(entry);
} else {
@@ -594,9 +623,9 @@
break;
if (pdo) {
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
ec_pdo_clear_entries(pdo);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
} else {
EC_CONFIG_WARN(sc, "PDO 0x%04X is not assigned.\n", pdo_index);
}
@@ -685,10 +714,6 @@
ec_pdo_entry_t *entry;
int sync_offset;
- EC_CONFIG_DBG(sc, 1, "%s(sc = 0x%p, index = 0x%04X, "
- "subindex = 0x%02X, domain = 0x%p, bit_position = 0x%p)\n",
- __func__, sc, index, subindex, domain, bit_position);
-
for (sync_index = 0; sync_index < EC_MAX_SYNC_MANAGERS; sync_index++) {
sync_config = &sc->sync_configs[sync_index];
bit_offset = 0;
@@ -712,7 +737,11 @@
if (sync_offset < 0)
return sync_offset;
- return sync_offset + bit_offset / 8;
+ EC_CONFIG_DBG(sc, 1, "%s(index = 0x%04X, "
+ "subindex = 0x%02X, domain = %u, bytepos=%u, bitpos=%u)\n",
+ __func__,index, subindex,
+ domain->index, sync_offset + bit_offset / 8, bit_pos);
+ return sync_offset + bit_offset / 8;
}
}
}
@@ -776,9 +805,9 @@
return ret;
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
list_add_tail(&req->list, &sc->sdo_configs);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return 0;
}
@@ -861,9 +890,9 @@
return ret;
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
list_add_tail(&req->list, &sc->sdo_configs);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return 0;
}
@@ -902,9 +931,9 @@
memset(req->data, 0x00, size);
req->data_size = size;
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
list_add_tail(&req->list, &sc->sdo_requests);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return req;
}
@@ -944,9 +973,9 @@
return ERR_PTR(ret);
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
list_add_tail(&voe->list, &sc->voe_handlers);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return voe;
}
@@ -1027,9 +1056,9 @@
return ret;
}
- down(&sc->master->master_sem);
+ ec_mutex_lock(&sc->master->master_mutex);
list_add_tail(&req->list, &sc->soe_configs);
- up(&sc->master->master_sem);
+ ec_mutex_unlock(&sc->master->master_mutex);
return 0;
}
@@ -1039,6 +1068,7 @@
EXPORT_SYMBOL(ecrt_slave_config_sync_manager);
EXPORT_SYMBOL(ecrt_slave_config_watchdog);
+EXPORT_SYMBOL(ecrt_slave_config_overlapping_pdos);
EXPORT_SYMBOL(ecrt_slave_config_pdo_assign_add);
EXPORT_SYMBOL(ecrt_slave_config_pdo_assign_clear);
EXPORT_SYMBOL(ecrt_slave_config_pdo_mapping_add);
--- a/master/slave_config.h Fri May 13 15:33:16 2011 +0200
+++ b/master/slave_config.h Fri May 13 15:34:20 2011 +0200
@@ -126,7 +126,8 @@
intervals (see spec. reg. 0x0400). */
uint16_t watchdog_intervals; /**< Process data watchdog intervals (see
spec. reg. 0x0420). */
-
+ uint8_t allow_overlapping_pdos; /**< Allow input PDOs use the same frame space
+ as output PDOs. */
ec_slave_t *slave; /**< Slave pointer. This is \a NULL, if the slave is
offline. */
--- a/master/voe_handler.c Fri May 13 15:33:16 2011 +0200
+++ b/master/voe_handler.c Fri May 13 15:34:20 2011 +0200
@@ -88,6 +88,7 @@
voe->request_state = EC_INT_REQUEST_INIT;
ec_datagram_init(&voe->datagram);
+ ec_mbox_init(&voe->mbox,&voe->datagram);
return ec_datagram_prealloc(&voe->datagram,
size + EC_MBOX_HEADER_SIZE + EC_VOE_HEADER_SIZE);
}
@@ -100,6 +101,7 @@
ec_voe_handler_t *voe /**< VoE handler. */
)
{
+ ec_mbox_clear(&voe->mbox);
ec_datagram_clear(&voe->datagram);
}
@@ -191,7 +193,7 @@
if (voe->config->slave) { // FIXME locking?
voe->state(voe);
if (voe->request_state == EC_INT_REQUEST_BUSY)
- ec_master_queue_datagram(voe->config->master, &voe->datagram);
+ ec_slave_mbox_queue_datagrams(voe->config->slave,&voe->mbox);
} else {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
@@ -224,7 +226,7 @@
return;
}
- data = ec_slave_mbox_prepare_send(slave, &voe->datagram,
+ data = ec_slave_mbox_prepare_send(slave, &voe->mbox,
EC_MBOX_TYPE_VOE, EC_VOE_HEADER_SIZE + voe->data_size);
if (IS_ERR(data)) {
voe->state = ec_voe_handler_state_error;
@@ -247,22 +249,22 @@
*/
void ec_voe_handler_state_write_response(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
- ec_slave_t *slave = voe->config->slave;
-
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && voe->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ ec_mailbox_t *mbox = &voe->mbox;
+ ec_slave_t *slave = voe->config->slave;
+
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && voe->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Failed to receive VoE write request datagram: ");
- ec_datagram_print_state(datagram);
- return;
- }
-
- if (datagram->working_counter != 1) {
- if (!datagram->working_counter) {
+ ec_datagram_print_state(mbox->datagram);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
unsigned long diff_ms =
(jiffies - voe->jiffies_start) * 1000 / HZ;
if (diff_ms < EC_VOE_RESPONSE_TIMEOUT) {
@@ -276,7 +278,7 @@
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Reception of VoE write request failed: ");
- ec_datagram_print_wc_error(datagram);
+ ec_datagram_print_wc_error(mbox->datagram);
return;
}
@@ -292,7 +294,7 @@
*/
void ec_voe_handler_state_read_start(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
+ ec_mailbox_t *mbox = &voe->mbox;
ec_slave_t *slave = voe->config->slave;
EC_SLAVE_DBG(slave, 1, "Reading VoE data.\n");
@@ -304,7 +306,7 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
voe->jiffies_start = jiffies;
voe->retries = EC_FSM_RETRIES;
@@ -317,32 +319,32 @@
*/
void ec_voe_handler_state_read_check(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
- ec_slave_t *slave = voe->config->slave;
-
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && voe->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ ec_mailbox_t *mbox = &voe->mbox;
+ ec_slave_t *slave = voe->config->slave;
+
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && voe->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Failed to receive VoE mailbox check datagram: ");
- ec_datagram_print_state(datagram);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Reception of VoE mailbox check"
" datagram failed: ");
- ec_datagram_print_wc_error(datagram);
- return;
- }
-
- if (!ec_slave_mbox_check(datagram)) {
+ ec_datagram_print_wc_error(mbox->datagram);
+ return;
+ }
+
+ if (!ec_slave_mbox_check(mbox)) {
unsigned long diff_ms =
- (datagram->jiffies_received - voe->jiffies_start) * 1000 / HZ;
+ (mbox->datagram->jiffies_received - voe->jiffies_start) * 1000 / HZ;
if (diff_ms >= EC_VOE_RESPONSE_TIMEOUT) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
@@ -350,13 +352,13 @@
return;
}
- ec_slave_mbox_prepare_check(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_check(slave, mbox); // can not fail.
voe->retries = EC_FSM_RETRIES;
return;
}
// Fetch response
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
voe->retries = EC_FSM_RETRIES;
voe->state = ec_voe_handler_state_read_response;
}
@@ -367,32 +369,32 @@
*/
void ec_voe_handler_state_read_response(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
+ ec_mailbox_t *mbox = &voe->mbox;
ec_slave_t *slave = voe->config->slave;
ec_master_t *master = voe->config->master;
uint8_t *data, mbox_prot;
size_t rec_size;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && voe->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && voe->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Failed to receive VoE read datagram: ");
- ec_datagram_print_state(datagram);
- return;
- }
-
- if (datagram->working_counter != 1) {
+ ec_datagram_print_state(mbox->datagram);
+ return;
+ }
+
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Reception of VoE read response failed: ");
- ec_datagram_print_wc_error(datagram);
- return;
- }
-
- data = ec_slave_mbox_fetch(slave, datagram, &mbox_prot, &rec_size);
+ ec_datagram_print_wc_error(mbox->datagram);
+ return;
+ }
+
+ data = ec_slave_mbox_fetch(slave, mbox, &mbox_prot, &rec_size);
if (IS_ERR(data)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
@@ -432,7 +434,7 @@
*/
void ec_voe_handler_state_read_nosync_start(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
+ ec_mailbox_t *mbox = &voe->mbox;
ec_slave_t *slave = voe->config->slave;
EC_SLAVE_DBG(slave, 1, "Reading VoE data.\n");
@@ -444,7 +446,7 @@
return;
}
- ec_slave_mbox_prepare_fetch(slave, datagram); // can not fail.
+ ec_slave_mbox_prepare_fetch(slave, mbox); // can not fail.
voe->jiffies_start = jiffies;
voe->retries = EC_FSM_RETRIES;
@@ -458,39 +460,39 @@
*/
void ec_voe_handler_state_read_nosync_response(ec_voe_handler_t *voe)
{
- ec_datagram_t *datagram = &voe->datagram;
+ ec_mailbox_t *mbox = &voe->mbox;
ec_slave_t *slave = voe->config->slave;
ec_master_t *master = voe->config->master;
uint8_t *data, mbox_prot;
size_t rec_size;
- if (datagram->state == EC_DATAGRAM_TIMED_OUT && voe->retries--)
- return;
-
- if (datagram->state != EC_DATAGRAM_RECEIVED) {
+ if (ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_TIMED_OUT) && voe->retries--)
+ return;
+
+ if (!ec_mbox_is_datagram_state(mbox,EC_DATAGRAM_RECEIVED)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_ERR(slave, "Failed to receive VoE read datagram: ");
- ec_datagram_print_state(datagram);
- return;
- }
-
- if (datagram->working_counter == 0) {
+ ec_datagram_print_state(mbox->datagram);
+ return;
+ }
+
+ if (ec_mbox_is_datagram_wc(mbox,0)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_DBG(slave, 1, "Slave did not send VoE data.\n");
return;
}
- if (datagram->working_counter != 1) {
+ if (!ec_mbox_is_datagram_wc(mbox,1)) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
EC_SLAVE_WARN(slave, "Reception of VoE read response failed: ");
- ec_datagram_print_wc_error(datagram);
- return;
- }
-
- if (!(data = ec_slave_mbox_fetch(slave, datagram,
+ ec_datagram_print_wc_error(mbox->datagram);
+ return;
+ }
+
+ if (!(data = ec_slave_mbox_fetch(slave, mbox,
&mbox_prot, &rec_size))) {
voe->state = ec_voe_handler_state_error;
voe->request_state = EC_INT_REQUEST_FAILURE;
--- a/master/voe_handler.h Fri May 13 15:33:16 2011 +0200
+++ b/master/voe_handler.h Fri May 13 15:34:20 2011 +0200
@@ -50,6 +50,7 @@
struct list_head list; /**< List item. */
ec_slave_config_t *config; /**< Parent slave configuration. */
ec_datagram_t datagram; /**< State machine datagram. */
+ ec_mailbox_t mbox; /**< State machine mailbox. */
uint32_t vendor_id; /**< Vendor ID for the header. */
uint16_t vendor_type; /**< Vendor type for the header. */
size_t data_size; /**< Size of VoE data. */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtdm/Kbuild.in Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,77 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the EtherCAT
+# technology and brand is only permitted in compliance with the industrial
+# property and similar rights of Beckhoff Automation GmbH.
+#
+# ---
+#
+# vi: syntax=make
+#
+#------------------------------------------------------------------------------
+
+obj-m := ec_rtdm.o
+
+ec_rtdm-objs := \
+ module.o
+
+ifeq (@ENABLE_XENOMAI@,1)
+
+### Xenomai directory, xeno-config and library directory ###########
+XENO_DIR := @XENOMAI_DIR@
+XENO_CONFIG := $(XENO_DIR)/bin/xeno-config
+XENO_LIB_DIR := $(shell $(XENO_CONFIG) --library-dir)
+
+REV := $(shell if test -s $(src)/../revision; then \
+ cat $(src)/../revision; \
+ else \
+ hg id -i $(src)/.. 2>/dev/null || echo "unknown"; \
+ fi)
+
+CFLAGS_module.o := -DREV=$(REV) -I$(XENO_DIR)/include -DENABLE_XENOMAI
+
+endif
+
+ifeq (@ENABLE_RTAI@,1)
+
+### RTAI directory, rtai_config and library directory ###########
+RTAI_DIR := @RTAI_DIR@
+RTAI_CONFIG := $(RTAI_DIR)/bin/rtai-config
+RTAI_LIB_DIR := $(shell $(RTAI_CONFIG) --library-dir)
+
+REV := $(shell if test -s $(src)/../revision; then \
+ cat $(src)/../revision; \
+ else \
+ hg id -i $(src)/.. 2>/dev/null || echo "unknown"; \
+ fi)
+
+CFLAGS_module.o := -DREV=$(REV) -I$(RTAI_DIR)/include -DENABLE_RTAI
+
+endif
+
+
+KBUILD_EXTRA_SYMBOLS := \
+ @abs_top_builddir@/$(LINUX_SYMVERS) \
+ @abs_top_builddir@/master/$(LINUX_SYMVERS)
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtdm/Makefile.am Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,51 @@
+#------------------------------------------------------------------------------
+#
+# $Id$
+#
+# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
+#
+# This file is part of the IgH EtherCAT Master.
+#
+# The IgH EtherCAT Master is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version 2, as
+# published by the Free Software Foundation.
+#
+# The IgH EtherCAT Master is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with the IgH EtherCAT Master; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# ---
+#
+# The license mentioned above concerns the source code only. Using the
+# EtherCAT technology and brand is only permitted in compliance with the
+# industrial property and similar rights of Beckhoff Automation GmbH.
+#
+#------------------------------------------------------------------------------
+
+
+# using HEADERS to enable tags target
+noinst_HEADERS = \
+ module.c
+
+EXTRA_DIST = \
+ Kbuild.in
+
+BUILT_SOURCES = \
+ Kbuild
+
+modules:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
+
+modules_install:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" \
+ INSTALL_MOD_DIR="$(INSTALL_MOD_DIR)" modules_install
+
+clean-local:
+ $(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
+
+#------------------------------------------------------------------------------
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtdm/module.c Fri May 13 15:34:20 2011 +0200
@@ -0,0 +1,795 @@
+/******************************************************************************
+ *
+ * $Id$
+ *
+ * ec_rtdm.c Copyright (C) 2009-2010 Moehwald GmbH B.Benner
+ * 2011 IgH Andreas Stewering-Bone
+ *
+ *
+ * This file is part of the IgH EtherCAT master
+ *
+ * The IgH EtherCAT master is free software; you can
+ * redistribute it and/or modify it under the terms of the GNU Lesser General
+ * Public License as published by the Free Software Foundation; version 2.1
+ * of the License.
+ *
+ * The IgH EtherCAT master userspace library is distributed in the hope that
+ * it will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with the IgH EtherCAT master userspace library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ *
+ * The license mentioned above concerns the source code only. Using the
+ * EtherCAT technology and brand is only permitted in compliance with the
+ * industrial property and similar rights of Beckhoff Automation GmbH.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/mman.h>
+
+
+#ifdef ENABLE_XENOMAI
+#include <native/task.h>
+#include <native/sem.h>
+#include <native/mutex.h>
+#include <native/timer.h>
+#endif
+
+#ifdef ENABLE_RTAI
+#include <rtai_sched.h>
+#include <rtai_sem.h>
+#endif
+
+
+#include <rtdm/rtdm_driver.h>
+
+#include "../include/ecrt.h"
+#include "../include/ec_rtdm.h"
+
+#ifdef ENABLE_XENOMAI
+#define my_mutex_create(X,Y) rt_mutex_create(X, Y)
+#define my_mutex_acquire(X,Y) rt_mutex_acquire(X,Y)
+#define my_mutex_release(X) rt_mutex_release(X)
+#define my_mutex_delete(X) rt_mutex_delete(X)
+#endif
+
+#ifdef ENABLE_RTAI
+#define my_mutex_create(X,Y) rt_sem_init(X, 1)
+#define my_mutex_acquire(X,Y) rt_sem_wait(X)
+#define my_mutex_release(X) rt_sem_signal(X)
+#define my_mutex_delete(X) rt_sem_delete(X)
+#define TM_INFINITE
+#endif
+
+
+
+
+#define EC_RTDM_MAX_MASTERS 5 /**< Maximum number of masters. */
+
+#define EC_RTDM_GINFO(fmt, args...) \
+ rtdm_printk(KERN_INFO "EtherCATrtdm: " fmt, ##args)
+
+#define EC_RTDM_GERR(fmt, args...) \
+ rtdm_printk(KERN_ERR "EtherCATrtdm ERROR: " fmt, ##args)
+
+#define EC_RTDM_GWARN(fmt, args...) \
+ rtdm_printk(KERN_WARNING "EtherCATrtdm WARNING: " fmt, ##args)
+
+
+#define EC_RTDM_INFO(devno, fmt, args...) \
+ rtdm_printk(KERN_INFO "EtherCATrtdm %u: " fmt, devno, ##args)
+
+#define EC_RTDM_ERR(devno, fmt, args...) \
+ rtdm_printk(KERN_ERR "EtherCATrtdm %u ERROR: " fmt, devno, ##args)
+
+#define EC_RTDM_WARN(devno, fmt, args...) \
+ rtdm_printk(KERN_WARNING "EtherCATrtdm %u WARNING: " fmt, devno, ##args)
+
+
+
+
+typedef struct _EC_RTDM_DRV_STRUCT {
+ unsigned int isattached;
+ ec_master_t * master;
+ ec_domain_t * domain;
+#ifdef ENABLE_XENOMAI
+ RT_MUTEX masterlock;
+#endif
+#ifdef ENABLE_RTAI
+ SEM masterlock;
+#endif
+ unsigned int sendcnt;
+ unsigned int reccnt;
+ unsigned int sendcntlv;
+ unsigned int reccntlv;
+ char mutexname[64];
+ unsigned int masterno;
+} EC_RTDM_DRV_STRUCT;
+
+
+static EC_RTDM_DRV_STRUCT ec_rtdm_masterintf[EC_RTDM_MAX_MASTERS];
+
+
+/* import from ethercat */
+ec_master_t *ecrt_attach_master(unsigned int master_index /**< Index of the master to request. */
+ );
+
+// driver context struct: used for storing various information
+typedef struct _EC_RTDM_DRV_CONTEXT {
+ int dev_id;
+ EC_RTDM_DRV_STRUCT* pdrvstruc;
+} EC_RTDM_DRV_CONTEXT;
+
+
+
+/**********************************************************/
+/* Utilities */
+/**********************************************************/
+
+static int _atoi(const char* text)
+{
+ char b;
+ int wd=-1;
+ int nfak=1;
+
+ wd=0;
+
+ while ((*text==' ') || (*text=='\t')) text++;
+ if (*text=='-')
+ {
+ nfak=-1;
+ text++;
+ }
+ if (*text=='+')
+ {
+ text++;
+ }
+ while (*text!=0)
+ {
+ b = *text;
+
+ if ( (b>='0') && (b<='9') )
+ {
+ b=b-'0';
+ wd=wd*10+b;
+ }
+ text++;
+ }
+ return (nfak*wd);
+}
+
+
+/**********************************************************/
+/* DRIVER sendcallback */
+/**********************************************************/
+void send_callback(void *cb_data)
+{
+ EC_RTDM_DRV_STRUCT * pdrvstruc;
+
+ pdrvstruc = (EC_RTDM_DRV_STRUCT*)cb_data;
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_master_send_ext(pdrvstruc->master);
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+}
+
+/*****************************************************************************/
+
+void receive_callback(void *cb_data)
+{
+ EC_RTDM_DRV_STRUCT * pdrvstruc;
+
+ pdrvstruc = (EC_RTDM_DRV_STRUCT*)cb_data;
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_master_receive(pdrvstruc->master);
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+}
+
+
+
+
+void detach_master(EC_RTDM_DRV_STRUCT * pdrvstruc)
+{
+
+ if (pdrvstruc->isattached)
+ {
+ EC_RTDM_INFO(pdrvstruc->masterno,"reseting callbacks!\n");
+ ecrt_master_callbacks(pdrvstruc->master,NULL,NULL,NULL);
+ EC_RTDM_INFO(pdrvstruc->masterno,"deleting mutex!\n");
+ my_mutex_delete(&pdrvstruc->masterlock);
+ pdrvstruc->master = NULL;
+ pdrvstruc->isattached=0;
+ EC_RTDM_INFO(pdrvstruc->masterno,"master detach done!\n");
+ }
+}
+
+
+
+
+/**********************************************************/
+/* DRIVER OPEN */
+/**********************************************************/
+int ec_rtdm_open_rt(struct rtdm_dev_context *context,
+ rtdm_user_info_t *user_info,
+ int oflags)
+{
+ EC_RTDM_DRV_CONTEXT* my_context;
+ EC_RTDM_DRV_STRUCT * pdrvstruc;
+ const char * p;
+ int dev_no;
+ unsigned int namelen;
+
+ //int ret;
+ int dev_id;
+
+ // get the context for our driver - used to store driver info
+ my_context = (EC_RTDM_DRV_CONTEXT*)context->dev_private;
+
+ dev_no = -1;
+ namelen = strlen(context->device->driver_name);
+ p = &context->device->driver_name[namelen-1];
+ if (p!=&context->device->driver_name[0])
+ {
+ while ((*p>='0') && (*p<='9'))
+ {
+ p--;
+ if (p==&context->device->driver_name[0]) break;
+ }
+ dev_no=_atoi(p);
+ if ((dev_no!=-1) && (dev_no<EC_RTDM_MAX_MASTERS))
+ {
+ dev_id = context->device->device_id;
+ pdrvstruc = (EC_RTDM_DRV_STRUCT*)&ec_rtdm_masterintf[dev_no];
+
+ my_context->dev_id = dev_id;
+ my_context->pdrvstruc = pdrvstruc;
+
+ // enable interrupt in RTDM
+ return 0;
+ }
+ }
+ EC_RTDM_GERR("open - Cannot detect master device no\n");
+ return -EFAULT;
+}
+
+/**********************************************************/
+/* DRIVER CLOSE */
+/**********************************************************/
+int ec_rtdm_close_rt(struct rtdm_dev_context *context,
+ rtdm_user_info_t *user_info)
+{
+ EC_RTDM_DRV_CONTEXT* my_context;
+ EC_RTDM_DRV_STRUCT * pdrvstruc;
+
+ // get the context
+ my_context = (EC_RTDM_DRV_CONTEXT*)context->dev_private;
+
+ pdrvstruc = my_context->pdrvstruc;
+ EC_RTDM_INFO(pdrvstruc->masterno,"close called!\n");
+ detach_master(pdrvstruc);
+ return 0;
+
+}
+
+/**********************************************************/
+/* DRIVER IOCTL */
+/**********************************************************/
+int ec_rtdm_ioctl_rt(struct rtdm_dev_context *context,
+ rtdm_user_info_t *user_info,
+ int request,
+ void *arg)
+{
+ EC_RTDM_DRV_CONTEXT* my_context;
+ EC_RTDM_DRV_STRUCT * pdrvstruc;
+ int ret;
+ unsigned int l_ioctlvalue[]={0,0,0,0,0,0,0,0};
+ ec_domain_state_t ds;
+ ec_master_state_t ms;
+ uint64_t app_time;
+
+
+ ret = 0;
+
+ // get the context
+ my_context = (EC_RTDM_DRV_CONTEXT*)context->dev_private;
+ pdrvstruc = my_context->pdrvstruc;
+
+ switch (request) {
+ case EC_RTDM_MASTERSTATE:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+
+ ecrt_master_state(pdrvstruc->master, &ms);
+
+ my_mutex_release(&pdrvstruc->masterlock);
+
+ }
+ if (rtdm_rw_user_ok(user_info, arg, sizeof(ms)))
+ {
+ // copy data to user
+ if (rtdm_copy_to_user(user_info, arg, &ms,sizeof(ms)))
+ {
+ return -EFAULT;
+ }
+ }
+
+ }
+ break;
+ case EC_RTDM_DOMAINSTATE:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->domain)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+
+ ecrt_domain_state(pdrvstruc->domain, &ds);
+
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ if (rtdm_rw_user_ok(user_info, arg, sizeof(ds)))
+ {
+ // copy data to user
+ if (rtdm_copy_to_user(user_info, arg, &ds,sizeof(ds)))
+ {
+ return -EFAULT;
+ }
+ }
+ }
+ break;
+ case EC_RTDM_MASTER_RECEIVE:
+ {
+ if (pdrvstruc->isattached)
+ {
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_master_receive(pdrvstruc->master);
+ pdrvstruc->reccnt++;
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ }
+ }
+ break;
+ case EC_RTDM_DOMAIN_PROCESS:
+ {
+ if (pdrvstruc->isattached)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_domain_process(pdrvstruc->domain);
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ }
+ break;
+ case EC_RTDM_MASTER_SEND:
+ {
+
+ if (pdrvstruc->isattached)
+ {
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_master_send(pdrvstruc->master);
+ pdrvstruc->sendcnt++;
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ }
+ }
+ break;
+ case EC_RTDM_DOMAIN_QUEQUE:
+ {
+ if (pdrvstruc->isattached)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_domain_queue(pdrvstruc->domain);
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ }
+ break;
+
+ case EC_RTDM_MASTER_APP_TIME:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ rtdm_printk("ERROR : No Master attached\n");
+ return -EFAULT;
+ }
+ if (rtdm_safe_copy_from_user(user_info, &app_time, arg, sizeof(app_time)))
+ {
+ rtdm_printk("ERROR : can't copy data to driver\n");
+ return -EFAULT;
+ }
+
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+
+ ecrt_master_application_time(pdrvstruc->master, app_time);
+ my_mutex_release(&pdrvstruc->masterlock);
+
+ }
+ }
+ break;
+ case EC_RTDM_SYNC_REF_CLOCK:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+
+ ecrt_master_sync_reference_clock(pdrvstruc->master);
+
+ my_mutex_release(&pdrvstruc->masterlock);
+
+ }
+ }
+ break;
+ case EC_RTDM_SYNC_SLAVE_CLOCK:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+
+ ecrt_master_sync_slave_clocks(pdrvstruc->master);
+
+ my_mutex_release(&pdrvstruc->masterlock);
+
+ }
+ }
+ break;
+ case EC_RTDM_MASTER_SYNC_MONITOR_QUEQUE:
+ {
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ecrt_master_sync_monitor_queue(pdrvstruc->master);
+ my_mutex_release(&pdrvstruc->masterlock);
+ }
+ }
+ break;
+ case EC_RTDM_MASTER_SYNC_MONITOR_PROCESS:
+ {
+ uint32_t ret;
+ if (!pdrvstruc->isattached)
+ {
+ return -EFAULT;
+ }
+ if (pdrvstruc->master)
+ {
+ my_mutex_acquire(&pdrvstruc->masterlock,TM_INFINITE);
+ ret = ecrt_master_sync_monitor_process(pdrvstruc->master);
+ my_mutex_release(&pdrvstruc->masterlock);
+ if (rtdm_safe_copy_to_user(user_info, arg, &ret, sizeof(ret)))
+ {
+ EC_RTDM_ERR(pdrvstruc->masterno,"copy to user param failed!\n");
+ ret=-EFAULT;
+ }
+ }
+ }
+ break;
+ case EC_RTDM_MSTRATTACH:
+ {
+ unsigned int mstridx;
+
+ mstridx = 0;
+ ret = 0;
+
+ EC_RTDM_INFO(pdrvstruc->masterno,"Master attach start!\n");
+ if (user_info)
+ {
+ if (rtdm_read_user_ok(user_info, arg, sizeof(unsigned int)))
+ {
+ if (rtdm_copy_from_user(user_info, &l_ioctlvalue[0], arg,sizeof(unsigned int))==0)
+ {
+ pdrvstruc->domain = (ec_domain_t*)l_ioctlvalue[0];
+ }
+ else
+ {
+ EC_RTDM_ERR(pdrvstruc->masterno,"copy user param failed!\n");
+ ret=-EFAULT;
+ }
+ }
+ else
+ {
+ EC_RTDM_ERR(pdrvstruc->masterno,"user parameter domain missing!\n");
+ ret=-EFAULT;
+ }
+ }
+ if (ret!=0)
+ {
+ return ret;
+ }
+
+ if ( (pdrvstruc->master) && (pdrvstruc->isattached))
+ // master is allready attached
+ {
+ // master is allready attached
+ EC_RTDM_ERR(pdrvstruc->masterno,"Master is allready attached!\n");
+ ret = -EFAULT;
+ }
+ else
+ {
+ //mstr=ecrt_request_master(0);
+ mstridx = pdrvstruc->masterno;
+
+ pdrvstruc->master=ecrt_attach_master(mstridx);
+
+ if (pdrvstruc->master)
+ {
+ // Ok
+ EC_RTDM_INFO(pdrvstruc->masterno,"Master searching for domain!\n");
+ pdrvstruc->domain = ecrt_master_find_domain(pdrvstruc->master,l_ioctlvalue[0]);
+ if (!pdrvstruc->domain)
+ {
+ //
+ EC_RTDM_ERR(pdrvstruc->masterno,"Cannot find domain from index %u!\n",l_ioctlvalue[0]);
+ ret = -EFAULT;
+ }
+ else
+ {
+
+ // set device name
+ snprintf(&pdrvstruc->mutexname[0],sizeof(pdrvstruc->mutexname)-1,"ETHrtdmLOCK%d",pdrvstruc->masterno);
+ EC_RTDM_INFO(pdrvstruc->masterno,"Creating Master mutex %s!\n",&pdrvstruc->mutexname[0]);
+ my_mutex_create(&pdrvstruc->masterlock,&pdrvstruc->mutexname[0]);
+ //ecrt_release_master(mstr);
+ ecrt_master_callbacks(pdrvstruc->master, send_callback, receive_callback, pdrvstruc);
+ EC_RTDM_INFO(pdrvstruc->masterno,"MSTR ATTACH done domain=%u!\n",(unsigned int)pdrvstruc->domain);
+ pdrvstruc->isattached=1;
+ ret = 0;
+ }
+
+ }
+ else
+ {
+ EC_RTDM_ERR(pdrvstruc->masterno,"Master attach failed!\n");
+ pdrvstruc->master = NULL;
+ ret = -EFAULT;
+ }
+ }
+ }
+ break;
+ default:
+ ret = -ENOTTY;
+ }
+ return ret;
+}
+
+
+/**********************************************************/
+/* DRIVER READ */
+/**********************************************************/
+int ec_rtdm_read_rt(struct rtdm_dev_context *context,
+ rtdm_user_info_t *user_info, void *buf, size_t nbyte)
+{
+ int ret;
+#if defined(USE_THIS)
+ EC_RTDM_DRV_CONTEXT* my_context;
+ char *out_pos;
+ int dev_id;
+ rtdm_toseq_t timeout_seq;
+ int ret;
+
+ out_pos = (char *)buf;
+
+ my_context = (EC_RTDM_DRV_CONTEXT*)context->dev_private;
+
+ // zero bytes requested ? return!
+ if (nbyte == 0)
+ return 0;
+
+ // check if R/W actions to user-space are allowed
+ if (user_info && !rtdm_rw_user_ok(user_info, buf, nbyte))
+ return -EFAULT;
+
+ dev_id = my_context->dev_id;
+
+ // in case we need to check if reading is allowed (locking)
+/* if (test_and_set_bit(0, &ctx->in_lock))
+ return -EBUSY;
+*/
+/* // if we need to do some stuff with preemption disabled:
+ rtdm_lock_get_irqsave(&ctx->lock, lock_ctx);
+ // stuff here
+ rtdm_lock_put_irqrestore(&ctx->lock, lock_ctx);
+*/
+
+ // wait: if ctx->timeout = 0, it will block infintely until
+ // rtdm_event_signal(&ctx->irq_event); is called from our
+ // interrupt routine
+ //ret = rtdm_event_timedwait(&ctx->irq_event, ctx->timeout, &timeout_seq);
+
+ // now write the requested stuff to user-space
+ if (rtdm_copy_to_user(user_info, out_pos,
+ dummy_buffer, BUFSIZE) != 0) {
+ ret = -EFAULT;
+ } else {
+ ret = BUFSIZE;
+ }
+#else
+ ret = -EFAULT;
+#endif
+ return ret;
+}
+
+/**********************************************************/
+/* DRIVER WRITE */
+/**********************************************************/
+int ec_rtdm_write_rt(struct rtdm_dev_context *context,
+ rtdm_user_info_t *user_info,
+ const void *buf, size_t nbyte)
+{
+ int ret;
+
+#if defined(USE_THIS)
+ int dev_id;
+ char *in_pos = (char *)buf;
+
+ EC_RTDM_DRV_CONTEXT* my_context;
+
+
+ my_context = (EC_RTDM_DRV_CONTEXT*)context->dev_private;
+
+
+ if (nbyte == 0)
+ return 0;
+ if (user_info && !rtdm_read_user_ok(user_info, buf, nbyte))
+ return -EFAULT;
+
+ dev_id = my_context->dev_id;
+
+ if (rtdm_copy_from_user(user_info, dummy_buffer,
+ in_pos, BUFSIZE) != 0) {
+ ret = -EFAULT;
+ } else {
+ ret = BUFSIZE;
+ }
+#else
+ ret = -EFAULT;
+#endif
+ // used when it is atomic
+// rtdm_mutex_unlock(&ctx->out_lock);
+ return ret;
+}
+
+/**********************************************************/
+/* DRIVER OPERATIONS */
+/**********************************************************/
+
+// Template
+
+static struct rtdm_device ec_rtdm_device_t = {
+ struct_version: RTDM_DEVICE_STRUCT_VER,
+
+ device_flags: RTDM_NAMED_DEVICE,
+ context_size: sizeof(EC_RTDM_DRV_CONTEXT),
+ device_name: EC_RTDM_DEV_FILE_NAME,
+
+/* open and close functions are not real-time safe due kmalloc
+ and kfree. If you do not use kmalloc and kfree, and you made
+ sure that there is no syscall in the open/close handler, you
+ can declare the open_rt and close_rt handler.
+*/
+ open_rt: NULL,
+ open_nrt: ec_rtdm_open_rt,
+
+ ops: {
+ close_rt: NULL,
+ close_nrt: ec_rtdm_close_rt,
+
+ ioctl_rt: ec_rtdm_ioctl_rt,
+ ioctl_nrt: ec_rtdm_ioctl_rt, // rtdm_mmap_to_user is not RT safe
+
+ read_rt: ec_rtdm_read_rt,
+ read_nrt: NULL,
+
+ write_rt: ec_rtdm_write_rt,
+ write_nrt: NULL,
+
+ recvmsg_rt: NULL,
+ recvmsg_nrt: NULL,
+
+ sendmsg_rt: NULL,
+ sendmsg_nrt: NULL,
+ },
+
+ device_class: RTDM_CLASS_EXPERIMENTAL,
+ device_sub_class: 222,
+ driver_name: EC_RTDM_DEV_FILE_NAME,
+ driver_version: RTDM_DRIVER_VER(1,0,1),
+ peripheral_name: EC_RTDM_DEV_FILE_NAME,
+ provider_name: "EtherLab Community",
+// proc_name: ethcatrtdm_device.device_name,
+};
+
+
+static struct rtdm_device ec_rtdm_devices[EC_RTDM_MAX_MASTERS];
+
+
+/**********************************************************/
+/* INIT DRIVER */
+/**********************************************************/
+int init_module(void)
+{
+ unsigned int i;
+ int ret;
+
+ ret = 0;
+
+ EC_RTDM_GINFO("Initlializing EtherCAT RTDM Interface to Igh EtherCAT Master\n");
+ memset(&ec_rtdm_masterintf[0],0,sizeof(ec_rtdm_masterintf));
+ for (i=0;( (i<EC_RTDM_MAX_MASTERS) && (ret==0) ) ;i++)
+ {
+ // master no to struct
+ ec_rtdm_masterintf[i].masterno = i;
+ // copy from template
+ memcpy(&ec_rtdm_devices[i],&ec_rtdm_device_t,sizeof(ec_rtdm_devices[0]));
+
+ // set device name
+ snprintf(&ec_rtdm_devices[i].device_name[0],RTDM_MAX_DEVNAME_LEN,"%s%d",EC_RTDM_DEV_FILE_NAME,i);
+ // set proc_name
+ ec_rtdm_devices[i].proc_name = &ec_rtdm_devices[i].device_name[0];
+ ec_rtdm_devices[i].driver_name = &ec_rtdm_devices[i].device_name[0];
+ ec_rtdm_devices[i].peripheral_name = &ec_rtdm_devices[i].device_name[0];
+
+ EC_RTDM_GINFO("Registering device %s!\n",ec_rtdm_devices[i].driver_name);
+ ret = rtdm_dev_register(&ec_rtdm_devices[i]);
+
+ }
+ if (ret!=0)
+ {
+ // register m
+ EC_RTDM_GERR("Initialization of EtherCAT RTDM Interface failed\n");
+ }
+ return ret;
+}
+
+/**********************************************************/
+/* CLEANUP DRIVER */
+/**********************************************************/
+void cleanup_module(void)
+{
+ unsigned int i;
+
+ EC_RTDM_GINFO("Cleanup EtherCAT RTDM Interface \n");
+ for (i=0;i<EC_RTDM_MAX_MASTERS;i++)
+ {
+ if (ec_rtdm_masterintf[i].isattached)
+ {
+ detach_master(&ec_rtdm_masterintf[i]);
+ }
+ EC_RTDM_GINFO("Unregistering device %s!\n",ec_rtdm_devices[i].driver_name);
+ rtdm_dev_unregister(&ec_rtdm_devices[i],1000);
+ }
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EtherCAT RTDM Interface");
--- a/tool/CommandDomains.cpp Fri May 13 15:33:16 2011 +0200
+++ b/tool/CommandDomains.cpp Fri May 13 15:34:20 2011 +0200
@@ -143,6 +143,8 @@
<< setw(8) << domain.logical_base_address
<< ", Size " << dec << setfill(' ')
<< setw(3) << domain.data_size
+ << ", TxSize " << dec << setfill(' ')
+ << setw(3) << domain.tx_size
<< ", WorkingCounter "
<< domain.working_counter << "/"
<< domain.expected_working_counter << endl;
@@ -173,7 +175,7 @@
<< setw(8) << fmmu.logical_address
<< ", Size " << dec << fmmu.data_size << endl;
- dataOffset = fmmu.logical_address - domain.logical_base_address;
+ dataOffset = fmmu.domain_address - domain.logical_base_address;
if (dataOffset + fmmu.data_size > domain.data_size) {
stringstream err;
delete [] processData;
--- a/tool/CommandFoeWrite.cpp Fri May 13 15:33:16 2011 +0200
+++ b/tool/CommandFoeWrite.cpp Fri May 13 15:34:20 2011 +0200
@@ -140,7 +140,8 @@
// write data via foe to the slave
data.offset = 0;
- strncpy(data.file_name, storeFileName.c_str(), sizeof(data.file_name));
+ strncpy(data.file_name, storeFileName.c_str(), sizeof(data.file_name)-1);
+ data.file_name[sizeof(data.file_name)-1] = '\0';
try {
m.writeFoe(&data);
--- a/tty/module.c Fri May 13 15:33:16 2011 +0200
+++ b/tty/module.c Fri May 13 15:34:20 2011 +0200
@@ -65,7 +65,7 @@
static struct tty_driver *tty_driver = NULL;
ec_tty_t *ttys[EC_TTY_MAX_DEVICES];
-struct semaphore tty_sem;
+struct ec_mutex_t tty_sem;
void ec_tty_wakeup(unsigned long);
@@ -111,7 +111,7 @@
struct timer_list timer;
struct tty_struct *tty;
unsigned int open_count;
- struct semaphore sem;
+ struct ec_mutex_t sem;
ec_tty_operations_t ops;
void *cb_data;
@@ -131,7 +131,7 @@
printk(KERN_INFO PFX "TTY driver %s\n", EC_MASTER_VERSION);
- sema_init(&tty_sem, 1);
+ ec_mutex_init(&tty_sem);
for (i = 0; i < EC_TTY_MAX_DEVICES; i++) {
ttys[i] = NULL;
@@ -202,7 +202,7 @@
init_timer(&t->timer);
t->tty = NULL;
t->open_count = 0;
- sema_init(&t->sem, 1);
+ ec_mutex_init(&t->sem);
t->ops = *ops;
t->cb_data = cb_data;
@@ -391,9 +391,9 @@
tty->driver_data = t;
}
- down(&t->sem);
+ ec_mutex_lock(&t->sem);
t->open_count++;
- up(&t->sem);
+ ec_mutex_unlock(&t->sem);
return 0;
}
@@ -409,11 +409,11 @@
#endif
if (t) {
- down(&t->sem);
+ ec_mutex_lock(&t->sem);
if (--t->open_count == 0) {
t->tty = NULL;
}
- up(&t->sem);
+ ec_mutex_unlock(&t->sem);
}
}
@@ -676,7 +676,7 @@
ec_tty_t *tty;
int minor, ret;
- if (down_interruptible(&tty_sem)) {
+ if (ec_mutex_lock_interruptible(&tty_sem)) {
return ERR_PTR(-EINTR);
}
@@ -686,25 +686,25 @@
tty = kmalloc(sizeof(ec_tty_t), GFP_KERNEL);
if (!tty) {
- up(&tty_sem);
+ ec_mutex_unlock(&tty_sem);
printk(KERN_ERR PFX "Failed to allocate memory.\n");
return ERR_PTR(-ENOMEM);
}
ret = ec_tty_init(tty, minor, ops, cb_data);
if (ret) {
- up(&tty_sem);
+ ec_mutex_unlock(&tty_sem);
kfree(tty);
return ERR_PTR(ret);
}
ttys[minor] = tty;
- up(&tty_sem);
+ ec_mutex_unlock(&tty_sem);
return tty;
}
}
- up(&tty_sem);
+ ec_mutex_unlock(&tty_sem);
printk(KERN_ERR PFX "No free interfaces avaliable.\n");
return ERR_PTR(-EBUSY);
}