Mon, 04 Jan 2010 11:28:29 +0100Merged
Matthias Luescher <ch1010472@ch10pc594> [Mon, 04 Jan 2010 11:28:29 +0100] rev 1609
Merged

Mon, 04 Jan 2010 11:27:37 +0100Fixed sdo request handling in case of failure
Matthias Luescher <ch1010472@ch10pc594> [Mon, 04 Jan 2010 11:27:37 +0100] rev 1608
Fixed sdo request handling in case of failure

Mon, 04 Jan 2010 14:16:53 +0100generic device driver checks link up/down
Martin Troxler <martin.troxler@komaxgroup.com> [Mon, 04 Jan 2010 14:16:53 +0100] rev 1607
generic device driver checks link up/down

Sun, 27 Dec 2009 16:58:19 +0100Merged
Martin Troxler <ch1010277@ch10lt194> [Sun, 27 Dec 2009 16:58:19 +0100] rev 1606
Merged

Fri, 18 Dec 2009 11:09:07 +0100merged
Martin Troxler <martin.troxler@komaxgroup.com> [Fri, 18 Dec 2009 11:09:07 +0100] rev 1605
merged

Fri, 18 Dec 2009 10:35:53 +0100undone changes of revision 1547: Abort SDO/FOE requests when slave is in INIT
Martin Troxler <martin.troxler@komaxgroup.com> [Fri, 18 Dec 2009 10:35:53 +0100] rev 1604
undone changes of revision 1547: Abort SDO/FOE requests when slave is in INIT

Thu, 17 Dec 2009 17:21:03 +0100fix build for recent kernel versions (tested with 2.6.31)
Matthias Luescher <ch1010472@ch10lt140> [Thu, 17 Dec 2009 17:21:03 +0100] rev 1603
fix build for recent kernel versions (tested with 2.6.31)

Thu, 17 Dec 2009 10:54:59 +0100removed busy loop in idle thread
Martin Troxler <martin.troxler@komaxgroup.com> [Thu, 17 Dec 2009 10:54:59 +0100] rev 1602
removed busy loop in idle thread

Tue, 15 Dec 2009 10:59:07 +0100master FSM enables slave FSM
Martin Troxler <martin.troxler@komaxgroup.com> [Tue, 15 Dec 2009 10:59:07 +0100] rev 1601
master FSM enables slave FSM
slave FSM should not be active when master is scanning or configuring the slaves

Tue, 15 Dec 2009 10:55:36 +0100use given send interval to limit SDO/FOE traffic
Martin Troxler <martin.troxler@komaxgroup.com> [Tue, 15 Dec 2009 10:55:36 +0100] rev 1600
use given send interval to limit SDO/FOE traffic

Tue, 15 Dec 2009 10:53:28 +0100removed obsolete datagram reinit in fsm_sii
Martin Troxler <martin.troxler@komaxgroup.com> [Tue, 15 Dec 2009 10:53:28 +0100] rev 1599
removed obsolete datagram reinit in fsm_sii

Thu, 10 Dec 2009 13:19:21 +0100Postpone SDO request when slave is in INIT
Martin Troxler <martin.troxler@komaxgroup.com> [Thu, 10 Dec 2009 13:19:21 +0100] rev 1598
Postpone SDO request when slave is in INIT

Tue, 01 Dec 2009 16:00:22 +0100Moved FOE request queue and fsm into slaves
Martin Troxler <martin.troxler@komaxgroup.com> [Tue, 01 Dec 2009 16:00:22 +0100] rev 1597
Moved FOE request queue and fsm into slaves

Tue, 01 Dec 2009 14:24:57 +0100Moved sdo request queue to slaves
Martin Troxler <martin.troxler@komaxgroup.com> [Tue, 01 Dec 2009 14:24:57 +0100] rev 1596
Moved sdo request queue to slaves

Fri, 08 Jan 2010 10:34:29 +0100Implemented tty put_char and break_ctl callbacks for kernels newer than 2.6.26
Florian Pose <fp@igh-essen.com> [Fri, 08 Jan 2010 10:34:29 +0100] rev 1595
Implemented tty put_char and break_ctl callbacks for kernels newer than 2.6.26
or 2.6.27, respectively.

Thu, 07 Jan 2010 17:26:39 +0100Implemented ecrt_master() and ecrt_master_get_slave() in kernel space.
Florian Pose <fp@igh-essen.com> [Thu, 07 Jan 2010 17:26:39 +0100] rev 1594
Implemented ecrt_master() and ecrt_master_get_slave() in kernel space.

Thu, 07 Jan 2010 17:26:02 +0100Fixed string length constant bug.
Florian Pose <fp@igh-essen.com> [Thu, 07 Jan 2010 17:26:02 +0100] rev 1593
Fixed string length constant bug.

Tue, 05 Jan 2010 13:44:46 +0100Removed 'Preliminary'.
Florian Pose <fp@igh-essen.com> [Tue, 05 Jan 2010 13:44:46 +0100] rev 1592
Removed 'Preliminary'.

Tue, 05 Jan 2010 12:36:29 +0100Ignore documentation files.
Florian Pose <fp@igh-essen.com> [Tue, 05 Jan 2010 12:36:29 +0100] rev 1591
Ignore documentation files.

Tue, 05 Jan 2010 12:36:07 +0100Updated FEATURES.
Florian Pose <fp@igh-essen.com> [Tue, 05 Jan 2010 12:36:07 +0100] rev 1590
Updated FEATURES.

Tue, 05 Jan 2010 12:32:52 +0100Revision and date on every page.
Florian Pose <fp@igh-essen.com> [Tue, 05 Jan 2010 12:32:52 +0100] rev 1589
Revision and date on every page.

Tue, 05 Jan 2010 12:23:40 +0100Using rcsInfo; Documented generic Ethernet driver.
Florian Pose <fp@igh-essen.com> [Tue, 05 Jan 2010 12:23:40 +0100] rev 1588
Using rcsInfo; Documented generic Ethernet driver.

Mon, 14 Dec 2009 13:29:06 +0100Updated TODO.
Florian Pose <fp@igh-essen.com> [Mon, 14 Dec 2009 13:29:06 +0100] rev 1587
Updated TODO.

Mon, 14 Dec 2009 13:25:50 +0100Merged changes by Martin Troxler.
Florian Pose <fp@igh-essen.com> [Mon, 14 Dec 2009 13:25:50 +0100] rev 1586
Merged changes by Martin Troxler.

Mon, 30 Nov 2009 12:26:56 +0100ecrt_master_set_max_cycle_size: limit SDO traffic
Martin Troxler <martin.troxler@komaxgroup.com> [Mon, 30 Nov 2009 12:26:56 +0100] rev 1585
ecrt_master_set_max_cycle_size: limit SDO traffic

Mon, 30 Nov 2009 12:26:24 +0100ec_print_data: show only the first 128 and the last 128 bytes of a data block
Martin Troxler <martin.troxler@komaxgroup.com> [Mon, 30 Nov 2009 12:26:24 +0100] rev 1584
ec_print_data: show only the first 128 and the last 128 bytes of a data block

Thu, 26 Nov 2009 15:33:48 +0100Each slave got its own SDO state machine (faster handling of external SDO requests)
Martin Troxler <martin.troxler@komaxgroup.com> [Thu, 26 Nov 2009 15:33:48 +0100] rev 1583
Each slave got its own SDO state machine (faster handling of external SDO requests)

Mon, 23 Nov 2009 14:22:48 +0100Fixed SDO up/download kernel oops bug
Martin Troxler <martin.troxler@komaxgroup.com> [Mon, 23 Nov 2009 14:22:48 +0100] rev 1582
Fixed SDO up/download kernel oops bug

Mon, 14 Dec 2009 13:11:36 +0100Merged changes from Martin Troxler.
Florian Pose <fp@igh-essen.com> [Mon, 14 Dec 2009 13:11:36 +0100] rev 1581
Merged changes from Martin Troxler.

Thu, 19 Nov 2009 14:44:57 +0100Merge
Martin Troxler <martin.troxler@komaxgroup.com> [Thu, 19 Nov 2009 14:44:57 +0100] rev 1580
Merge

Thu, 19 Nov 2009 14:39:10 +0100applied komax patch to version r1822
Martin Troxler <martin.troxler@komaxgroup.com> [Thu, 19 Nov 2009 14:39:10 +0100] rev 1579
applied komax patch to version r1822
- adapted to 2.6.31 (-rt): init_MUTEX -> sema_init, net_device_ops (Matthias L?scher)
- 8139too eth driver for 2.6.31 (Matthias L?scher)
- scan_busy queryable in user mode (ec_master_info_t) (Martin Troxler)
- read alias from register 0x0012 (TODO: reread alias after sii write) (Martin Troxler)
- cancel external SDO/FOE,Reg&SII requests (Martin Troxler)

Wed, 09 Dec 2009 14:40:35 +0100Added README to dist.
Florian Pose <fp@igh-essen.com> [Wed, 09 Dec 2009 14:40:35 +0100] rev 1578
Added README to dist.

Wed, 09 Dec 2009 12:42:28 +0100Implemented reading direction of tty driver.
Florian Pose <fp@igh-essen.com> [Wed, 09 Dec 2009 12:42:28 +0100] rev 1577
Implemented reading direction of tty driver.

Wed, 02 Dec 2009 15:46:00 +0100Fixed distribution of TTY example.
Florian Pose <fp@igh-essen.com> [Wed, 02 Dec 2009 15:46:00 +0100] rev 1576
Fixed distribution of TTY example.

Wed, 02 Dec 2009 15:38:10 +0100Send direction works!
Florian Pose <fp@igh-essen.com> [Wed, 02 Dec 2009 15:38:10 +0100] rev 1575
Send direction works!

Tue, 01 Dec 2009 22:33:24 +0100Add ectty.h to dist.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 22:33:24 +0100] rev 1574
Add ectty.h to dist.

Tue, 01 Dec 2009 22:29:25 +0100Create tty.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 22:29:25 +0100] rev 1573
Create tty.

Tue, 01 Dec 2009 22:19:13 +0100Removed semaphore header.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 22:19:13 +0100] rev 1572
Removed semaphore header.

Tue, 01 Dec 2009 22:16:50 +0100TTY open and close.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 22:16:50 +0100] rev 1571
TTY open and close.

Tue, 01 Dec 2009 22:03:50 +0100Use own PFX for printk.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 22:03:50 +0100] rev 1570
Use own PFX for printk.

Tue, 01 Dec 2009 21:45:45 +0100Interface management.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 21:45:45 +0100] rev 1569
Interface management.

Tue, 01 Dec 2009 17:35:33 +0100Register a TTY driver with one device.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 17:35:33 +0100] rev 1568
Register a TTY driver with one device.

Tue, 01 Dec 2009 16:54:59 +0100Added tty example.
Florian Pose <fp@igh-essen.com> [Tue, 01 Dec 2009 16:54:59 +0100] rev 1567
Added tty example.

Mon, 30 Nov 2009 18:10:36 +0100Install ec_tty module.
Florian Pose <fp@igh-essen.com> [Mon, 30 Nov 2009 18:10:36 +0100] rev 1566
Install ec_tty module.

Mon, 30 Nov 2009 18:02:29 +0100Base files for new TTY driver.
Florian Pose <fp@igh-essen.com> [Mon, 30 Nov 2009 18:02:29 +0100] rev 1565
Base files for new TTY driver.

Mon, 23 Nov 2009 11:55:25 +0100TODO.
Florian Pose <fp@igh-essen.com> [Mon, 23 Nov 2009 11:55:25 +0100] rev 1564
TODO.

Sat, 21 Nov 2009 21:46:52 +0100Introduced mailbox/CoE defines; avoided duplicate code in CoE segmented
Florian Pose <fp@igh-essen.com> [Sat, 21 Nov 2009 21:46:52 +0100] rev 1563
Introduced mailbox/CoE defines; avoided duplicate code in CoE segmented
download.

Fri, 20 Nov 2009 19:01:38 +0100SDO segmented download.
Florian Pose <fp@igh-essen.com> [Fri, 20 Nov 2009 19:01:38 +0100] rev 1562
SDO segmented download.

Thu, 19 Nov 2009 13:53:33 +0100Use net_device_ops also for EoE devices from 2.6.29 on.
Florian Pose <fp@igh-essen.com> [Thu, 19 Nov 2009 13:53:33 +0100] rev 1561
Use net_device_ops also for EoE devices from 2.6.29 on.

Tue, 17 Nov 2009 11:05:20 +0100Allow BITx types in XML output.
Florian Pose <fp@igh-essen.com> [Tue, 17 Nov 2009 11:05:20 +0100] rev 1560
Allow BITx types in XML output.

Mon, 09 Nov 2009 10:29:29 +0100Fixed receiving multiple frames in generic device.
Florian Pose <fp@igh-essen.com> [Mon, 09 Nov 2009 10:29:29 +0100] rev 1559
Fixed receiving multiple frames in generic device.

Mon, 09 Nov 2009 10:21:18 +0100generic device receive buffer in heap.
Florian Pose <fp@igh-essen.com> [Mon, 09 Nov 2009 10:21:18 +0100] rev 1558
generic device receive buffer in heap.

Thu, 05 Nov 2009 12:08:21 +0100Fixed bug in generic driver failing to create debug interfaces, because the
Florian Pose <fp@igh-essen.com> [Thu, 05 Nov 2009 12:08:21 +0100] rev 1557
Fixed bug in generic driver failing to create debug interfaces, because the
interface lock is held.

Thu, 05 Nov 2009 10:22:58 +0100Init script and sysconfig file for generic Ethernet driver.
Florian Pose <fp@igh-essen.com> [Thu, 05 Nov 2009 10:22:58 +0100] rev 1556
Init script and sysconfig file for generic Ethernet driver.

Thu, 05 Nov 2009 09:37:31 +0100Generic driver net_device_ops for kernels < 2.6.29.
Florian Pose <fp@igh-essen.com> [Thu, 05 Nov 2009 09:37:31 +0100] rev 1555
Generic driver net_device_ops for kernels < 2.6.29.

Thu, 05 Nov 2009 09:25:25 +0100Print complete Ethernet frame during debug.
Florian Pose <fp@igh-essen.com> [Thu, 05 Nov 2009 09:25:25 +0100] rev 1554
Print complete Ethernet frame during debug.

Thu, 29 Oct 2009 17:28:49 +0100Bugfix: Unqueue datagram before destroying.
Florian Pose <fp@igh-essen.com> [Thu, 29 Oct 2009 17:28:49 +0100] rev 1553
Bugfix: Unqueue datagram before destroying.

Wed, 28 Oct 2009 14:59:34 +0100Later freeing of netdev.
Florian Pose <fp@igh-essen.com> [Wed, 28 Oct 2009 14:59:34 +0100] rev 1552
Later freeing of netdev.

Wed, 28 Oct 2009 14:01:23 +0100Added missing newline.
Florian Pose <fp@igh-essen.com> [Wed, 28 Oct 2009 14:01:23 +0100] rev 1551
Added missing newline.

Wed, 28 Oct 2009 13:47:39 +0100Avoid zeroing mailbox datagram because of VoE handlers.
Florian Pose <fp@igh-essen.com> [Wed, 28 Oct 2009 13:47:39 +0100] rev 1550
Avoid zeroing mailbox datagram because of VoE handlers.

Wed, 28 Oct 2009 13:18:07 +0100merge
Florian Pose <fp@igh-essen.com> [Wed, 28 Oct 2009 13:18:07 +0100] rev 1549
merge

Wed, 28 Oct 2009 13:17:08 +0100Using snprintf for interface name.
Florian Pose <fp@igh-essen.com> [Wed, 28 Oct 2009 13:17:08 +0100] rev 1548
Using snprintf for interface name.

Wed, 21 Oct 2009 18:49:47 +0200merged e100 for 2.6.27.
Florian Pose <fp@igh-essen.com> [Wed, 21 Oct 2009 18:49:47 +0200] rev 1547
merged e100 for 2.6.27.

Wed, 30 Sep 2009 21:14:40 +0200Added e100 driver for 2.6.27.
Florian Pose <fp@igh-essen.com> [Wed, 30 Sep 2009 21:14:40 +0200] rev 1546
Added e100 driver for 2.6.27.

Tue, 20 Oct 2009 13:14:53 +0200TODO
Florian Pose <fp@igh-essen.com> [Tue, 20 Oct 2009 13:14:53 +0200] rev 1545
TODO

Mon, 19 Oct 2009 13:13:55 +0200Merge x86_64 fixes.
Florian Pose <fp@igh-essen.com> [Mon, 19 Oct 2009 13:13:55 +0200] rev 1544
Merge x86_64 fixes.

Mon, 19 Oct 2009 13:12:40 +0200Avoid warnings on x86_64 platform. Thanks to Thomas Elste.
Florian Pose <fp@igh-essen.com> [Mon, 19 Oct 2009 13:12:40 +0200] rev 1543
Avoid warnings on x86_64 platform. Thanks to Thomas Elste.

Thu, 15 Oct 2009 18:01:41 +0200Implemented poll(); receiving on generic device also works.
Florian Pose <fp@igh-essen.com> [Thu, 15 Oct 2009 18:01:41 +0200] rev 1542
Implemented poll(); receiving on generic device also works.

Thu, 15 Oct 2009 17:38:53 +0200Sending via generic device works.
Florian Pose <fp@igh-essen.com> [Thu, 15 Oct 2009 17:38:53 +0200] rev 1541
Sending via generic device works.

Tue, 13 Oct 2009 17:56:32 +0200Basic generic Ethernet device module.
Florian Pose <fp@igh-essen.com> [Tue, 13 Oct 2009 17:56:32 +0200] rev 1540
Basic generic Ethernet device module.

Tue, 13 Oct 2009 16:52:56 +0200Removed unused sysfs macros.
Florian Pose <fp@igh-essen.com> [Tue, 13 Oct 2009 16:52:56 +0200] rev 1539
Removed unused sysfs macros.

Tue, 06 Oct 2009 13:50:30 +0200Fixed clearing slaves: Also clear external requests before. Thanks to Martin
Florian Pose <fp@igh-essen.com> [Tue, 06 Oct 2009 13:50:30 +0200] rev 1538
Fixed clearing slaves: Also clear external requests before. Thanks to Martin
Troxler.

Thu, 27 Aug 2009 21:03:43 +0200TODO.
Florian Pose <fp@igh-essen.com> [Thu, 27 Aug 2009 21:03:43 +0200] rev 1537
TODO.

Mon, 24 Aug 2009 12:01:22 +0200Added watchdog documentation.
Florian Pose <fp@igh-essen.com> [Mon, 24 Aug 2009 12:01:22 +0200] rev 1536
Added watchdog documentation.

Fri, 21 Aug 2009 12:15:16 +0200DC synchrony monitoring methods.
Florian Pose <fp@igh-essen.com> [Fri, 21 Aug 2009 12:15:16 +0200] rev 1535
DC synchrony monitoring methods.

Fri, 21 Aug 2009 09:46:29 +0200Merge
Florian Pose <fp@igh-essen.com> [Fri, 21 Aug 2009 09:46:29 +0200] rev 1534
Merge

Fri, 21 Aug 2009 09:45:53 +0200Fixed SDO upload segment response for 10 bytes mailbox length (thanks to Joerg
Florian Pose <fp@igh-essen.com> [Fri, 21 Aug 2009 09:45:53 +0200] rev 1533
Fixed SDO upload segment response for 10 bytes mailbox length (thanks to Joerg
Mohre).

Thu, 20 Aug 2009 17:41:45 +0200TODO.
Florian Pose <fp@igh-essen.com> [Thu, 20 Aug 2009 17:41:45 +0200] rev 1532
TODO.

Thu, 20 Aug 2009 14:43:55 +0200Implemented ecrt_master_deactivate() in userspace.
Florian Pose <fp@igh-essen.com> [Thu, 20 Aug 2009 14:43:55 +0200] rev 1531
Implemented ecrt_master_deactivate() in userspace.

Thu, 20 Aug 2009 14:27:35 +0200Added ecrt_master_deactivate() to remove the bus configuration.
Florian Pose <fp@igh-essen.com> [Thu, 20 Aug 2009 14:27:35 +0200] rev 1530
Added ecrt_master_deactivate() to remove the bus configuration.

Tue, 18 Aug 2009 10:30:12 +0200TODO.
Florian Pose <fp@igh-essen.com> [Tue, 18 Aug 2009 10:30:12 +0200] rev 1529
TODO.

Thu, 13 Aug 2009 15:18:53 +0200Switched from Subversion to Mercurial.
Florian Pose <fp@igh-essen.com> [Thu, 13 Aug 2009 15:18:53 +0200] rev 1528
Switched from Subversion to Mercurial.

Thu, 13 Aug 2009 13:55:53 +0200Ignore swp files.
Florian Pose <fp@igh-essen.com> [Thu, 13 Aug 2009 13:55:53 +0200] rev 1527
Ignore swp files.

Thu, 13 Aug 2009 13:53:56 +0200Implemented CompleteAccess for SDO downloads.
Florian Pose <fp@igh-essen.com> [Thu, 13 Aug 2009 13:53:56 +0200] rev 1526
Implemented CompleteAccess for SDO downloads.

Thu, 13 Aug 2009 10:13:02 +0200Ignore m4 files.
Florian Pose <fp@igh-essen.com> [Thu, 13 Aug 2009 10:13:02 +0200] rev 1525
Ignore m4 files.

Tue, 11 Aug 2009 17:39:13 +0200Committed misteriously modified files...
Florian Pose <fp@igh-essen.com> [Tue, 11 Aug 2009 17:39:13 +0200] rev 1524
Committed misteriously modified files...

Tue, 11 Aug 2009 17:12:58 +0200Added .hgignore.
Florian Pose <fp@igh-essen.com> [Tue, 11 Aug 2009 17:12:58 +0200] rev 1523
Added .hgignore.

Tue, 11 Aug 2009 13:53:11 +0000update tags
convert-repo [Tue, 11 Aug 2009 13:53:11 +0000] rev 1522
update tags

Tue, 11 Aug 2009 12:15:20 +0000Check for NULL pointer in ecdev_receive().
Florian Pose <fp@igh-essen.com> [Tue, 11 Aug 2009 12:15:20 +0000] rev 1521
Check for NULL pointer in ecdev_receive().

Thu, 06 Aug 2009 12:52:53 +0000Fixed setting watchdog intervals.
Florian Pose <fp@igh-essen.com> [Thu, 06 Aug 2009 12:52:53 +0000] rev 1520
Fixed setting watchdog intervals.

Tue, 04 Aug 2009 12:57:23 +0000Minrt changes.
Florian Pose <fp@igh-essen.com> [Tue, 04 Aug 2009 12:57:23 +0000] rev 1519
Minrt changes.

Tue, 04 Aug 2009 12:52:12 +0000Output watchdog configuration in ethercat config.
Florian Pose <fp@igh-essen.com> [Tue, 04 Aug 2009 12:52:12 +0000] rev 1518
Output watchdog configuration in ethercat config.

Tue, 04 Aug 2009 09:10:16 +0000DC documentation; new callback mechanism; cstruct
Florian Pose <fp@igh-essen.com> [Tue, 04 Aug 2009 09:10:16 +0000] rev 1517
DC documentation; new callback mechanism; cstruct

Tue, 04 Aug 2009 07:54:16 +0000Fixed compiler error on --disable-eoe.
Florian Pose <fp@igh-essen.com> [Tue, 04 Aug 2009 07:54:16 +0000] rev 1516
Fixed compiler error on --disable-eoe.

Thu, 30 Jul 2009 14:21:28 +0000Added r8169 driver for 2.6.29.
Florian Pose <fp@igh-essen.com> [Thu, 30 Jul 2009 14:21:28 +0000] rev 1515
Added r8169 driver for 2.6.29.

Wed, 29 Jul 2009 12:24:55 +0000Added 'ethercat cstruct' command to output PDO information in C language.
Florian Pose <fp@igh-essen.com> [Wed, 29 Jul 2009 12:24:55 +0000] rev 1514
Added 'ethercat cstruct' command to output PDO information in C language.

Wed, 29 Jul 2009 09:19:53 +0000Re-added callback data pointer, because it is necessary for some applications.
Florian Pose <fp@igh-essen.com> [Wed, 29 Jul 2009 09:19:53 +0000] rev 1513
Re-added callback data pointer, because it is necessary for some applications.

Tue, 28 Jul 2009 16:06:21 +0000Fixed typos.
Florian Pose <fp@igh-essen.com> [Tue, 28 Jul 2009 16:06:21 +0000] rev 1512
Fixed typos.

Tue, 28 Jul 2009 15:42:43 +0000TODO.
Florian Pose <fp@igh-essen.com> [Tue, 28 Jul 2009 15:42:43 +0000] rev 1511
TODO.

Tue, 28 Jul 2009 15:42:00 +0000Improved bus information API.
Florian Pose <fp@igh-essen.com> [Tue, 28 Jul 2009 15:42:00 +0000] rev 1510
Improved bus information API.

Mon, 27 Jul 2009 10:48:52 +0000Added watchdog configuration via application interface (thanks to J. Mohre).
Florian Pose <fp@igh-essen.com> [Mon, 27 Jul 2009 10:48:52 +0000] rev 1509
Added watchdog configuration via application interface (thanks to J. Mohre).

Mon, 27 Jul 2009 10:44:16 +0000Removed more tabulators.
Florian Pose <fp@igh-essen.com> [Mon, 27 Jul 2009 10:44:16 +0000] rev 1508
Removed more tabulators.

Mon, 27 Jul 2009 10:37:47 +0000Removed unwanted tabulators.
Florian Pose <fp@igh-essen.com> [Mon, 27 Jul 2009 10:37:47 +0000] rev 1507
Removed unwanted tabulators.

Thu, 16 Jul 2009 07:52:17 +0000Fixed IRQ freeing bug in e100 drivers.
Florian Pose <fp@igh-essen.com> [Thu, 16 Jul 2009 07:52:17 +0000] rev 1506
Fixed IRQ freeing bug in e100 drivers.

Wed, 15 Jul 2009 12:00:17 +0000Added e100 for kernel 2.6.29, thanks to Andre Puschmann.
Florian Pose <fp@igh-essen.com> [Wed, 15 Jul 2009 12:00:17 +0000] rev 1505
Added e100 for kernel 2.6.29, thanks to Andre Puschmann.

Wed, 15 Jul 2009 11:55:05 +0000Minor: Removed unnecessary condition.
Florian Pose <fp@igh-essen.com> [Wed, 15 Jul 2009 11:55:05 +0000] rev 1504
Minor: Removed unnecessary condition.

Wed, 15 Jul 2009 09:44:13 +0000TODO
Florian Pose <fp@igh-essen.com> [Wed, 15 Jul 2009 09:44:13 +0000] rev 1503
TODO

Wed, 15 Jul 2009 09:39:45 +0000Fixed segfault on link change in e100 drivers.
Florian Pose <fp@igh-essen.com> [Wed, 15 Jul 2009 09:39:45 +0000] rev 1502
Fixed segfault on link change in e100 drivers.

Mon, 13 Jul 2009 15:26:28 +0000Added semaphore header distinction in minimal example.
Florian Pose <fp@igh-essen.com> [Mon, 13 Jul 2009 15:26:28 +0000] rev 1501
Added semaphore header distinction in minimal example.

Mon, 13 Jul 2009 15:18:28 +0000Improved the callback mechanism.
Florian Pose <fp@igh-essen.com> [Mon, 13 Jul 2009 15:18:28 +0000] rev 1500
Improved the callback mechanism.

Fri, 10 Jul 2009 10:40:05 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 10:40:05 +0000] rev 1499
TODO.

Fri, 10 Jul 2009 10:37:14 +0000Fixed SDO upload segment response (thanks to Christoph Peter).
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 10:37:14 +0000] rev 1498
Fixed SDO upload segment response (thanks to Christoph Peter).

Fri, 10 Jul 2009 10:07:48 +0000Separated master requesting into open and reserve for userspace library.
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 10:07:48 +0000] rev 1497
Separated master requesting into open and reserve for userspace library.
(thanks to Martin Troxler).

Fri, 10 Jul 2009 09:38:37 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 09:38:37 +0000] rev 1496
TODO.

Fri, 10 Jul 2009 09:38:07 +0000Reverted accidential checkin.
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 09:38:07 +0000] rev 1495
Reverted accidential checkin.

Fri, 10 Jul 2009 09:36:50 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 10 Jul 2009 09:36:50 +0000] rev 1494
TODO.

Thu, 09 Jul 2009 14:08:16 +0000Increased default buffer size for SDO uploads to 64k.
Florian Pose <fp@igh-essen.com> [Thu, 09 Jul 2009 14:08:16 +0000] rev 1493
Increased default buffer size for SDO uploads to 64k.

Thu, 09 Jul 2009 14:05:36 +0000Zero mailbox datagram before sending.
Florian Pose <fp@igh-essen.com> [Thu, 09 Jul 2009 14:05:36 +0000] rev 1492
Zero mailbox datagram before sending.

Thu, 09 Jul 2009 12:54:49 +0000Configure PDO sync managers even if no configuration has been applied.
Florian Pose <fp@igh-essen.com> [Thu, 09 Jul 2009 12:54:49 +0000] rev 1491
Configure PDO sync managers even if no configuration has been applied.

Mon, 06 Jul 2009 09:06:31 +0000Ignores.
Florian Pose <fp@igh-essen.com> [Mon, 06 Jul 2009 09:06:31 +0000] rev 1490
Ignores.

Tue, 30 Jun 2009 11:11:56 +0000EoE processing with kthread.
Florian Pose <fp@igh-essen.com> [Tue, 30 Jun 2009 11:11:56 +0000] rev 1489
EoE processing with kthread.

Mon, 29 Jun 2009 14:27:06 +0000Output device opened/closed only on debug level 2.
Florian Pose <fp@igh-essen.com> [Mon, 29 Jun 2009 14:27:06 +0000] rev 1488
Output device opened/closed only on debug level 2.

Mon, 29 Jun 2009 14:25:31 +0000Minor: Changed comment style.
Florian Pose <fp@igh-essen.com> [Mon, 29 Jun 2009 14:25:31 +0000] rev 1487
Minor: Changed comment style.

Fri, 26 Jun 2009 12:21:56 +0000EoE transmit retry; EoE warnings.
Florian Pose <fp@igh-essen.com> [Fri, 26 Jun 2009 12:21:56 +0000] rev 1486
EoE transmit retry; EoE warnings.

Fri, 26 Jun 2009 09:46:57 +0000ethercat eoe command.
Florian Pose <fp@igh-essen.com> [Fri, 26 Jun 2009 09:46:57 +0000] rev 1485
ethercat eoe command.

Fri, 26 Jun 2009 08:00:47 +0000Debug statements with EC_DBG() in EoE code.
Florian Pose <fp@igh-essen.com> [Fri, 26 Jun 2009 08:00:47 +0000] rev 1484
Debug statements with EC_DBG() in EoE code.

Fri, 26 Jun 2009 07:44:50 +0000Minor: vendor/product with 8 hex digits.
Florian Pose <fp@igh-essen.com> [Fri, 26 Jun 2009 07:44:50 +0000] rev 1483
Minor: vendor/product with 8 hex digits.

Wed, 24 Jun 2009 20:32:28 +0000TODO.
Florian Pose <fp@igh-essen.com> [Wed, 24 Jun 2009 20:32:28 +0000] rev 1482
TODO.

Fri, 19 Jun 2009 14:44:21 +0000Ignore Module.markers.
Florian Pose <fp@igh-essen.com> [Fri, 19 Jun 2009 14:44:21 +0000] rev 1481
Ignore Module.markers.

Fri, 19 Jun 2009 14:41:06 +0000merge -c1788 branches/stable-1.4: ec_master.symvers installation.
Florian Pose <fp@igh-essen.com> [Fri, 19 Jun 2009 14:41:06 +0000] rev 1480
merge -c1788 branches/stable-1.4: ec_master.symvers installation.

Fri, 19 Jun 2009 14:39:13 +0000merge -c1787 branches/stable-1.4: Added r8169 driver for 2.6.28.
Florian Pose <fp@igh-essen.com> [Fri, 19 Jun 2009 14:39:13 +0000] rev 1479
merge -c1787 branches/stable-1.4: Added r8169 driver for 2.6.28.

Thu, 18 Jun 2009 11:40:13 +0000Redesign of EoE statemachine.
Florian Pose <fp@igh-essen.com> [Thu, 18 Jun 2009 11:40:13 +0000] rev 1478
Redesign of EoE statemachine.

Tue, 16 Jun 2009 08:36:15 +0000Added e100 driver for 2.6.28, thanks to Kim H. Madsen.
Florian Pose <fp@igh-essen.com> [Tue, 16 Jun 2009 08:36:15 +0000] rev 1477
Added e100 driver for 2.6.28, thanks to Kim H. Madsen.

Tue, 16 Jun 2009 08:30:49 +0000Implemented new network device operations for kernel 2.6.29, thanks to M. Goetze.
Florian Pose <fp@igh-essen.com> [Tue, 16 Jun 2009 08:30:49 +0000] rev 1476
Implemented new network device operations for kernel 2.6.29, thanks to M. Goetze.

Tue, 16 Jun 2009 08:29:30 +0000Added 8139too driver for 2.6.29, thanks to M. Goetze.
Florian Pose <fp@igh-essen.com> [Tue, 16 Jun 2009 08:29:30 +0000] rev 1475
Added 8139too driver for 2.6.29, thanks to M. Goetze.

Tue, 16 Jun 2009 08:04:50 +0000'ethercat xml' creates <EtherCATInfoList> for more than one slave.
Florian Pose <fp@igh-essen.com> [Tue, 16 Jun 2009 08:04:50 +0000] rev 1474
'ethercat xml' creates <EtherCATInfoList> for more than one slave.

Tue, 16 Jun 2009 07:42:29 +0000TODO.
Florian Pose <fp@igh-essen.com> [Tue, 16 Jun 2009 07:42:29 +0000] rev 1473
TODO.

Mon, 15 Jun 2009 15:58:09 +0000Continue with next sync manager if reading the PDOs failed.
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 15:58:09 +0000] rev 1472
Continue with next sync manager if reading the PDOs failed.

Mon, 15 Jun 2009 15:46:04 +0000Fixed mailbox usage for slaves that do not provide sync manager
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 15:46:04 +0000] rev 1471
Fixed mailbox usage for slaves that do not provide sync manager
configurations.

Mon, 15 Jun 2009 15:39:26 +0000Minor.
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 15:39:26 +0000] rev 1470
Minor.

Mon, 15 Jun 2009 15:29:24 +0000Improved newlines in debug data output.
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 15:29:24 +0000] rev 1469
Improved newlines in debug data output.

Mon, 15 Jun 2009 12:33:48 +0000Improved error checking on SDO upload.
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 12:33:48 +0000] rev 1468
Improved error checking on SDO upload.

Mon, 15 Jun 2009 09:24:58 +0000Minor fix in 'ethercat config' output.
Florian Pose <fp@igh-essen.com> [Mon, 15 Jun 2009 09:24:58 +0000] rev 1467
Minor fix in 'ethercat config' output.

Fri, 15 May 2009 09:06:28 +0000EC_TIMEVAL2NANO() takes no pointer argument any more.
Florian Pose <fp@igh-essen.com> [Fri, 15 May 2009 09:06:28 +0000] rev 1466
EC_TIMEVAL2NANO() takes no pointer argument any more.

Fri, 15 May 2009 09:05:27 +0000Added documentation.
Florian Pose <fp@igh-essen.com> [Fri, 15 May 2009 09:05:27 +0000] rev 1465
Added documentation.

Wed, 13 May 2009 09:09:58 +0000TODO.
Florian Pose <fp@igh-essen.com> [Wed, 13 May 2009 09:09:58 +0000] rev 1464
TODO.

Fri, 08 May 2009 13:35:06 +0000Minor: Added missing setfill().
Florian Pose <fp@igh-essen.com> [Fri, 08 May 2009 13:35:06 +0000] rev 1463
Minor: Added missing setfill().

Fri, 08 May 2009 07:16:30 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 08 May 2009 07:16:30 +0000] rev 1462
TODO.

Fri, 08 May 2009 07:15:14 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 08 May 2009 07:15:14 +0000] rev 1461
TODO.

Thu, 07 May 2009 15:00:01 +0000Added 8139too driver for 2.6.28, thanks to M. Goetze.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 15:00:01 +0000] rev 1460
Added 8139too driver for 2.6.28, thanks to M. Goetze.

Thu, 07 May 2009 12:25:19 +0000TODO.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 12:25:19 +0000] rev 1459
TODO.

Thu, 07 May 2009 12:25:10 +0000Debugging output.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 12:25:10 +0000] rev 1458
Debugging output.

Thu, 07 May 2009 11:41:45 +0000Slightly improved CoE download expedited request.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 11:41:45 +0000] rev 1457
Slightly improved CoE download expedited request.

Thu, 07 May 2009 10:40:38 +0000Fixed output of 'ethercat config'.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 10:40:38 +0000] rev 1456
Fixed output of 'ethercat config'.

Thu, 07 May 2009 10:33:26 +0000Output DC config in 'ethercat config'.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 10:33:26 +0000] rev 1455
Output DC config in 'ethercat config'.

Thu, 07 May 2009 10:11:21 +0000Added EC_IOCTL_APP_TIME.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 10:11:21 +0000] rev 1454
Added EC_IOCTL_APP_TIME.

Thu, 07 May 2009 08:44:00 +0000Symbol versions; Makefile improvements.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 08:44:00 +0000] rev 1453
Symbol versions; Makefile improvements.

Thu, 07 May 2009 08:12:13 +0000Do not create m4 directory in bootstrap file.
Florian Pose <fp@igh-essen.com> [Thu, 07 May 2009 08:12:13 +0000] rev 1452
Do not create m4 directory in bootstrap file.

Wed, 06 May 2009 15:06:46 +0000Always set DC reference clock to OP.
Florian Pose <fp@igh-essen.com> [Wed, 06 May 2009 15:06:46 +0000] rev 1451
Always set DC reference clock to OP.

Wed, 06 May 2009 14:59:21 +0000TODO.
Florian Pose <fp@igh-essen.com> [Wed, 06 May 2009 14:59:21 +0000] rev 1450
TODO.

Tue, 05 May 2009 15:18:24 +0000Ported examples to new DC configuration function.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 15:18:24 +0000] rev 1449
Ported examples to new DC configuration function.

Tue, 05 May 2009 15:03:59 +0000Merged ecrt_slave_config_dc_assign_activate() and
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 15:03:59 +0000] rev 1448
Merged ecrt_slave_config_dc_assign_activate() and
ecrt_slave_config_dc_sync_signals() to ecrt_slave_config_dc().

Tue, 05 May 2009 10:01:55 +0000Added scan_busy flag to ioctl().
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 10:01:55 +0000] rev 1447
Added scan_busy flag to ioctl().

Tue, 05 May 2009 09:57:42 +0000Fixed usage of IS_ERR() in FoE state machine.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 09:57:42 +0000] rev 1446
Fixed usage of IS_ERR() in FoE state machine.

Tue, 05 May 2009 09:50:04 +0000Introduced EC_AL_STATE_CHANGE_TIMEOUT and set it to 2 s.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 09:50:04 +0000] rev 1445
Introduced EC_AL_STATE_CHANGE_TIMEOUT and set it to 2 s.

Tue, 05 May 2009 09:45:31 +0000Unset idle flag while processing FoE requests.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 09:45:31 +0000] rev 1444
Unset idle flag while processing FoE requests.

Tue, 05 May 2009 09:43:32 +0000Changed EC_MAX_SII_SIZE to 4096.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 09:43:32 +0000] rev 1443
Changed EC_MAX_SII_SIZE to 4096.

Tue, 05 May 2009 09:38:44 +0000TODO.
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 09:38:44 +0000] rev 1442
TODO.

Tue, 05 May 2009 08:15:02 +0000Added ecrt_slave_sdo_upload() and ecrt_slave_sdo_download(). Thanks to
Florian Pose <fp@igh-essen.com> [Tue, 05 May 2009 08:15:02 +0000] rev 1441
Added ecrt_slave_sdo_upload() and ecrt_slave_sdo_download(). Thanks to
S. Weiser.

Mon, 04 May 2009 13:53:41 +0000Added deummy Makefile.am for m4 directory.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 13:53:41 +0000] rev 1440
Added deummy Makefile.am for m4 directory.

Mon, 04 May 2009 13:49:56 +0000Added m4 directory.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 13:49:56 +0000] rev 1439
Added m4 directory.

Mon, 04 May 2009 12:46:30 +0000Replaced ecrt_slave_config_dc_cycle_times() and ecrt_slave_config_dc_shift_times() by ecrt_slave_config_dc_sync_signals().
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 12:46:30 +0000] rev 1438
Replaced ecrt_slave_config_dc_cycle_times() and ecrt_slave_config_dc_shift_times() by ecrt_slave_config_dc_sync_signals().

Mon, 04 May 2009 12:13:24 +0000TODO.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 12:13:24 +0000] rev 1437
TODO.

Mon, 04 May 2009 12:11:00 +0000Use application start time as a common reference for cyclic generation
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 12:11:00 +0000] rev 1436
Use application start time as a common reference for cyclic generation
start times.

Mon, 04 May 2009 12:10:11 +0000Take ref clock address from dc_ref_clock pointer.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 12:10:11 +0000] rev 1435
Take ref clock address from dc_ref_clock pointer.

Mon, 04 May 2009 10:05:55 +0000Separated application time from synchronizing reference clock.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 10:05:55 +0000] rev 1434
Separated application time from synchronizing reference clock.

Mon, 04 May 2009 10:05:02 +0000Add empty m4 directory.
Florian Pose <fp@igh-essen.com> [Mon, 04 May 2009 10:05:02 +0000] rev 1433
Add empty m4 directory.

Thu, 30 Apr 2009 19:36:19 +0000m4 macro dir.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 19:36:19 +0000] rev 1432
m4 macro dir.

Thu, 30 Apr 2009 19:35:58 +0000Fixed const char * comparison.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 19:35:58 +0000] rev 1431
Fixed const char * comparison.

Thu, 30 Apr 2009 16:04:44 +0000Set system time transmission delay during config.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 16:04:44 +0000] rev 1430
Set system time transmission delay during config.

Thu, 30 Apr 2009 15:56:53 +0000Decimal transmission delay.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 15:56:53 +0000] rev 1429
Decimal transmission delay.

Thu, 30 Apr 2009 14:44:37 +0000Moved fonts to graph begin.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 14:44:37 +0000] rev 1428
Moved fonts to graph begin.

Thu, 30 Apr 2009 14:44:15 +0000TODO.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 14:44:15 +0000] rev 1427
TODO.

Thu, 30 Apr 2009 14:37:02 +0000Transition->Transmission.
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 14:37:02 +0000] rev 1426
Transition->Transmission.

Thu, 30 Apr 2009 14:12:47 +0000Transition delay calculation. TBC...
Florian Pose <fp@igh-essen.com> [Thu, 30 Apr 2009 14:12:47 +0000] rev 1425
Transition delay calculation. TBC...

Wed, 29 Apr 2009 14:03:01 +0000Modeline for vim > 7.0.
Florian Pose <fp@igh-essen.com> [Wed, 29 Apr 2009 14:03:01 +0000] rev 1424
Modeline for vim > 7.0.

Wed, 29 Apr 2009 13:15:56 +0000Updated command doc.
Florian Pose <fp@igh-essen.com> [Wed, 29 Apr 2009 13:15:56 +0000] rev 1423
Updated command doc.

Wed, 29 Apr 2009 13:06:38 +0000Added 'ethercat graph' command.
Florian Pose <fp@igh-essen.com> [Wed, 29 Apr 2009 13:06:38 +0000] rev 1422
Added 'ethercat graph' command.

Wed, 29 Apr 2009 09:43:04 +0000Bus topology calculation.
Florian Pose <fp@igh-essen.com> [Wed, 29 Apr 2009 09:43:04 +0000] rev 1421
Bus topology calculation.

Mon, 27 Apr 2009 15:20:14 +0000Measure port receive times.
Florian Pose <fp@igh-essen.com> [Mon, 27 Apr 2009 15:20:14 +0000] rev 1420
Measure port receive times.

Mon, 27 Apr 2009 11:38:03 +0000Determine type of DC implementation (full or delay meas. only); update scan FSM graph.
Florian Pose <fp@igh-essen.com> [Mon, 27 Apr 2009 11:38:03 +0000] rev 1419
Determine type of DC implementation (full or delay meas. only); update scan FSM graph.

Fri, 24 Apr 2009 13:43:51 +0000TODO.
Florian Pose <fp@igh-essen.com> [Fri, 24 Apr 2009 13:43:51 +0000] rev 1418
TODO.

Fri, 24 Apr 2009 10:24:53 +0000Replaced timeval by 64-bit EtherCAT time.
Florian Pose <fp@igh-essen.com> [Fri, 24 Apr 2009 10:24:53 +0000] rev 1417
Replaced timeval by 64-bit EtherCAT time.

Fri, 24 Apr 2009 09:51:11 +0000Added missing doc.
Florian Pose <fp@igh-essen.com> [Fri, 24 Apr 2009 09:51:11 +0000] rev 1416
Added missing doc.

Fri, 24 Apr 2009 08:39:20 +0000Output reference clock and application time in 'ethercat Master'.
Florian Pose <fp@igh-essen.com> [Fri, 24 Apr 2009 08:39:20 +0000] rev 1415
Output reference clock and application time in 'ethercat Master'.

Thu, 23 Apr 2009 14:50:23 +0000DC example applications.
Florian Pose <fp@igh-essen.com> [Thu, 23 Apr 2009 14:50:23 +0000] rev 1414
DC example applications.

Thu, 23 Apr 2009 14:45:07 +0000Userspace library implementation of DC functions.
Florian Pose <fp@igh-essen.com> [Thu, 23 Apr 2009 14:45:07 +0000] rev 1413
Userspace library implementation of DC functions.

Thu, 23 Apr 2009 12:25:09 +0000DC shift time working.
Florian Pose <fp@igh-essen.com> [Thu, 23 Apr 2009 12:25:09 +0000] rev 1412
DC shift time working.

Thu, 23 Apr 2009 12:20:35 +0000Added shift times to api.
Florian Pose <fp@igh-essen.com> [Thu, 23 Apr 2009 12:20:35 +0000] rev 1411
Added shift times to api.

Thu, 23 Apr 2009 12:02:26 +0000Separated sync_reference_clock() and sync_slave_clocks().
Florian Pose <fp@igh-essen.com> [Thu, 23 Apr 2009 12:02:26 +0000] rev 1410
Separated sync_reference_clock() and sync_slave_clocks().

Mon, 20 Apr 2009 14:37:30 +0000Updated graph for slave configuration FSM.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 14:37:30 +0000] rev 1409
Updated graph for slave configuration FSM.

Mon, 20 Apr 2009 14:33:47 +0000Find DC reference clock.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 14:33:47 +0000] rev 1408
Find DC reference clock.

Mon, 20 Apr 2009 13:43:57 +0000Improved DC configuration.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 13:43:57 +0000] rev 1407
Improved DC configuration.

Mon, 20 Apr 2009 11:53:17 +0000Clear DC assignment after going to INIT.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 11:53:17 +0000] rev 1406
Clear DC assignment after going to INIT.

Mon, 20 Apr 2009 10:28:09 +0000Updated graph of slave configuration FSM.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 10:28:09 +0000] rev 1405
Updated graph of slave configuration FSM.

Mon, 20 Apr 2009 10:27:36 +0000Minor changes.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 10:27:36 +0000] rev 1404
Minor changes.

Mon, 20 Apr 2009 10:27:12 +0000TODO.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 10:27:12 +0000] rev 1403
TODO.

Mon, 20 Apr 2009 09:17:39 +0000Tested clearing slave list after link down; minor changes.
Florian Pose <fp@igh-essen.com> [Mon, 20 Apr 2009 09:17:39 +0000] rev 1402
Tested clearing slave list after link down; minor changes.

Fri, 17 Apr 2009 12:55:55 +0000Output link state in 'ethercat master'.
Florian Pose <fp@igh-essen.com> [Fri, 17 Apr 2009 12:55:55 +0000] rev 1401
Output link state in 'ethercat master'.

Fri, 17 Apr 2009 12:41:57 +0000Clear slave list on link down.
Florian Pose <fp@igh-essen.com> [Fri, 17 Apr 2009 12:41:57 +0000] rev 1400
Clear slave list on link down.

Fri, 17 Apr 2009 12:03:12 +0000Added debug_level module parameter. debug_level is now unsigned int.
Florian Pose <fp@igh-essen.com> [Fri, 17 Apr 2009 12:03:12 +0000] rev 1399
Added debug_level module parameter. debug_level is now unsigned int.

Fri, 17 Apr 2009 11:07:27 +0000Removed unused variable.
Florian Pose <fp@igh-essen.com> [Fri, 17 Apr 2009 11:07:27 +0000] rev 1398
Removed unused variable.

Fri, 17 Apr 2009 10:39:19 +0000Introduced DEBUG_IOCTL.
Florian Pose <fp@igh-essen.com> [Fri, 17 Apr 2009 10:39:19 +0000] rev 1397
Introduced DEBUG_IOCTL.

Thu, 09 Apr 2009 18:21:18 +0000DC sync reference clock to application time. TBC...
Florian Pose <fp@igh-essen.com> [Thu, 09 Apr 2009 18:21:18 +0000] rev 1396
DC sync reference clock to application time. TBC...

Thu, 09 Apr 2009 14:56:23 +0000Added 64-bit types to reg_write.
Florian Pose <fp@igh-essen.com> [Thu, 09 Apr 2009 14:56:23 +0000] rev 1395
Added 64-bit types to reg_write.

Thu, 09 Apr 2009 10:21:47 +0000Introduced ecrt_master_sync() for synchronizing slave clocks to reference clock.
Florian Pose <fp@igh-essen.com> [Thu, 09 Apr 2009 10:21:47 +0000] rev 1394
Introduced ecrt_master_sync() for synchronizing slave clocks to reference clock.

Thu, 09 Apr 2009 10:18:27 +0000Output (fixed-size) hex value before decimal value.
Florian Pose <fp@igh-essen.com> [Thu, 09 Apr 2009 10:18:27 +0000] rev 1393
Output (fixed-size) hex value before decimal value.

Thu, 09 Apr 2009 09:17:41 +0000DC cyclic operation and slave configuration. TBC...
Florian Pose <fp@igh-essen.com> [Thu, 09 Apr 2009 09:17:41 +0000] rev 1392
DC cyclic operation and slave configuration. TBC...

Wed, 08 Apr 2009 16:20:13 +0000Fixed uint64 width at reg_read.
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 16:20:13 +0000] rev 1391
Fixed uint64 width at reg_read.

Wed, 08 Apr 2009 14:49:36 +0000Fixed 64-bit register reading.
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 14:49:36 +0000] rev 1390
Fixed 64-bit register reading.

Wed, 08 Apr 2009 14:10:34 +0000reg_write with data types.
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 14:10:34 +0000] rev 1389
reg_write with data types.

Wed, 08 Apr 2009 12:48:59 +0000Renamed phy_ commands to reg_.
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 12:48:59 +0000] rev 1388
Renamed phy_ commands to reg_.

Wed, 08 Apr 2009 12:10:01 +0000Data types for phy_read.
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 12:10:01 +0000] rev 1387
Data types for phy_read.

Wed, 08 Apr 2009 11:48:00 +0000Check phy_request length for read operations, too!
Florian Pose <fp@igh-essen.com> [Wed, 08 Apr 2009 11:48:00 +0000] rev 1386
Check phy_request length for read operations, too!