examples/rtai/README
author Florian Pose
Fri, 05 Oct 2018 10:24:11 +0200
branchstable-1.5
changeset 2724 b4a109b9e2a8
parent 1080 088a61306930
permissions -rw-r--r--
Set --enable-sii-assign by default.
-------------------------------------------------------------------------------

$Id$

-------------------------------------------------------------------------------

This is a minimal example module for the use of the EtherCAT master realtime
interface with an RTAI thread.

The module expects an RTAI installation. Configure the master sources
specifying --with-rtai-dir to have the right include paths.

Most probably you'll have different EtherCAT slaves present. Try adjusting the
section "process data" in rtai_sample.c to your bus configuration.

There are some features that can be disabled by commenting out the respective
defines at the head of rtai_sample.c.

---

To build the example module, call:

make modules

To run it, load the appropriate RTAI modules and call:

insmod ec_rtai_sample.ko

...and watch the system logs for the outputs.

-------------------------------------------------------------------------------