EL31XX-Typ korrigiert.
/******************************************************************************
*
* c a n o p e n . c
*
* CANopen over EtherCAT
*
* $Id$
*
*****************************************************************************/
#include <linux/delay.h>
#include "master.h"
/*****************************************************************************/
// Prototypen
/*****************************************************************************/
/**
Schreibt ein CANopen-SDO (service data object).
*/
int EtherCAT_rt_canopen_sdo_write(
ec_slave_t *slave, /**< EtherCAT-Slave */
unsigned int sdo_index, /**< SDO-Index */
unsigned char sdo_subindex, /**< SDO-Subindex */
unsigned int value, /**< Neuer Wert */
unsigned int size /**< Größe des Datenfeldes */
)
{
unsigned char data[0xF6];
ec_frame_t frame;
unsigned int tries_left, i;
ec_master_t *master;
memset(data, 0x00, 0xF6);
master = slave->master;
if (size == 0 || size > 4) {
printk(KERN_ERR "EtherCAT: Illegal SDO data size: %i!\n", size);
return -1;
}
data[0] = 0x0A; // Length of the Mailbox service data
data[1] = 0x00;
data[2] = slave->station_address & 0xFF; // Station address
data[3] = (slave->station_address >> 8) & 0xFF;
data[4] = 0x00; // Channel & priority
data[5] = 0x03; // CANopen over EtherCAT
data[6] = 0x00; // Number(7-0)
data[7] = 0x2 << 4; // Number(8) & Service = SDO Request (0x02)
data[8] = 0x01 // Size specified
| (0x1 << 1) // Transfer type = Expedited
| ((4 - size) << 2) // Data Set Size
| (0x1 << 5); // Command specifier = Initiate download request (0x01)
data[9] = sdo_index & 0xFF;
data[10] = (sdo_index >> 8) & 0xFF;
data[11] = sdo_subindex;
for (i = 0; i < size; i++) {
data[12 + i] = value & 0xFF;
value >>= 8;
}
ec_frame_init_npwr(&frame, master, slave->station_address, 0x1800, 0xF6,
data);
if (unlikely(ec_frame_send_receive(&frame) < 0)) return -1;
if (unlikely(frame.working_counter != 1)) {
printk(KERN_ERR "EtherCAT: Mailbox send - Slave %i did not respond!\n",
slave->ring_position);
return -1;
}
// Read "written bit" of Sync-Manager
tries_left = 10;
while (tries_left)
{
ec_frame_init_nprd(&frame, master, slave->station_address, 0x808, 8);
if (unlikely(ec_frame_send_receive(&frame) < 0)) return -1;
if (unlikely(frame.working_counter != 1)) {
printk(KERN_ERR "EtherCAT: Mailbox check - Slave %i did not"
" respond!\n", slave->ring_position);
return -1;
}
if (frame.data[5] & 8) { // Written bit is high
break;
}
udelay(1000);
tries_left--;
}
if (!tries_left) {
printk(KERN_ERR "EtherCAT: Mailbox check - Slave %i timed out.\n",
slave->ring_position);
return -1;
}
ec_frame_init_nprd(&frame, master, slave->station_address, 0x18F6, 0xF6);
if (unlikely(ec_frame_send_receive(&frame) < 0)) return -1;
if (unlikely(frame.working_counter != 1)) {
printk(KERN_ERR "EtherCAT: Mailbox receive - Slave %i did not"
" respond!\n", slave->ring_position);
return -1;
}
if (frame.data[5] != 0x03 // COE
|| (frame.data[7] >> 4) != 0x03 // SDO response
|| (frame.data[8] >> 5) != 0x03 // Initiate download response
|| (frame.data[9] != (sdo_index & 0xFF)) // Index
|| (frame.data[10] != ((sdo_index >> 8) & 0xFF))
|| (frame.data[11] != sdo_subindex)) // Subindex
{
printk(KERN_ERR "EtherCAT: Illegal mailbox response at slave %i!\n",
slave->ring_position);
return -1;
}
return 0;
}
/*****************************************************************************/
EXPORT_SYMBOL(EtherCAT_rt_canopen_sdo_write);
/*****************************************************************************/
/* Emacs-Konfiguration
;;; Local Variables: ***
;;; c-basic-offset:4 ***
;;; End: ***
*/