Auto-generate architecture pdf.
#------------------------------------------------------------------------------
#
# $Id$
#
# Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
#
# This file is part of the IgH EtherCAT Master.
#
# The IgH EtherCAT Master is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License version 2, as
# published by the Free Software Foundation.
#
# The IgH EtherCAT Master is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with the IgH EtherCAT Master; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
# ---
#
# The license mentioned above concerns the source code only. Using the
# EtherCAT technology and brand is only permitted in compliance with the
# industrial property and similar rights of Beckhoff Automation GmbH.
#
#------------------------------------------------------------------------------
EXTRA_DIST = \
Kbuild.in \
LICENSE \
e1000-2.6.13-ethercat.h \
e1000-2.6.13-orig.h \
e1000-2.6.18-ethercat.h \
e1000-2.6.18-orig.h \
e1000-2.6.20-ethercat.h \
e1000-2.6.20-orig.h \
e1000-2.6.22-ethercat.h \
e1000-2.6.22-orig.h \
e1000-2.6.24-ethercat.h \
e1000-2.6.24-orig.h \
e1000-2.6.26-ethercat.h \
e1000-2.6.26-orig.h \
e1000_ethtool-2.6.13-ethercat.c \
e1000_ethtool-2.6.13-orig.c \
e1000_ethtool-2.6.18-ethercat.c \
e1000_ethtool-2.6.18-orig.c \
e1000_ethtool-2.6.20-ethercat.c \
e1000_ethtool-2.6.20-orig.c \
e1000_ethtool-2.6.22-ethercat.c \
e1000_ethtool-2.6.22-orig.c \
e1000_ethtool-2.6.24-ethercat.c \
e1000_ethtool-2.6.24-orig.c \
e1000_ethtool-2.6.26-ethercat.c \
e1000_ethtool-2.6.26-orig.c \
e1000_hw-2.6.13-ethercat.c \
e1000_hw-2.6.13-ethercat.h \
e1000_hw-2.6.13-orig.c \
e1000_hw-2.6.13-orig.h \
e1000_hw-2.6.18-ethercat.c \
e1000_hw-2.6.18-ethercat.h \
e1000_hw-2.6.18-orig.c \
e1000_hw-2.6.18-orig.h \
e1000_hw-2.6.20-ethercat.c \
e1000_hw-2.6.20-ethercat.h \
e1000_hw-2.6.20-orig.c \
e1000_hw-2.6.20-orig.h \
e1000_hw-2.6.22-ethercat.c \
e1000_hw-2.6.22-ethercat.h \
e1000_hw-2.6.22-orig.c \
e1000_hw-2.6.22-orig.h \
e1000_hw-2.6.24-ethercat.c \
e1000_hw-2.6.24-ethercat.h \
e1000_hw-2.6.24-orig.c \
e1000_hw-2.6.24-orig.h \
e1000_hw-2.6.26-ethercat.c \
e1000_hw-2.6.26-ethercat.h \
e1000_hw-2.6.26-orig.c \
e1000_hw-2.6.26-orig.h \
e1000_main-2.6.13-ethercat.c \
e1000_main-2.6.13-orig.c \
e1000_main-2.6.18-ethercat.c \
e1000_main-2.6.18-orig.c \
e1000_main-2.6.20-ethercat.c \
e1000_main-2.6.20-orig.c \
e1000_main-2.6.22-ethercat.c \
e1000_main-2.6.22-orig.c \
e1000_main-2.6.24-ethercat.c \
e1000_main-2.6.24-orig.c \
e1000_main-2.6.26-ethercat.c \
e1000_main-2.6.26-orig.c \
e1000_osdep-2.6.13-ethercat.h \
e1000_osdep-2.6.13-orig.h \
e1000_osdep-2.6.18-ethercat.h \
e1000_osdep-2.6.18-orig.h \
e1000_osdep-2.6.20-ethercat.h \
e1000_osdep-2.6.20-orig.h \
e1000_osdep-2.6.22-ethercat.h \
e1000_osdep-2.6.22-orig.h \
e1000_osdep-2.6.24-ethercat.h \
e1000_osdep-2.6.24-orig.h \
e1000_osdep-2.6.26-ethercat.h \
e1000_osdep-2.6.26-orig.h \
e1000_param-2.6.13-ethercat.c \
e1000_param-2.6.13-orig.c \
e1000_param-2.6.18-ethercat.c \
e1000_param-2.6.18-orig.c \
e1000_param-2.6.20-ethercat.c \
e1000_param-2.6.20-orig.c \
e1000_param-2.6.22-ethercat.c \
e1000_param-2.6.22-orig.c \
e1000_param-2.6.24-ethercat.c \
e1000_param-2.6.24-orig.c \
e1000_param-2.6.26-ethercat.c \
e1000_param-2.6.26-orig.c
BUILT_SOURCES = \
Kbuild
modules:
$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" modules
modules_install:
mkdir -p $(DESTDIR)$(LINUX_MOD_PATH)
if ENABLE_E1000
cp $(srcdir)/ec_e1000.ko $(DESTDIR)$(LINUX_MOD_PATH)
endif
clean-local:
$(MAKE) -C "$(LINUX_SOURCE_DIR)" M="@abs_srcdir@" clean
#------------------------------------------------------------------------------