Use sched_setscheduler() to set priority in user example.
/* Intel(R) Gigabit Ethernet Linux driver
* Copyright(c) 2007-2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*/
#ifndef _E1000_I210_H_
#define _E1000_I210_H_
s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
s32 igb_read_invm_version(struct e1000_hw *hw,
struct e1000_fw_version *invm_ver);
s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
bool igb_get_flash_presence_i210(struct e1000_hw *hw);
s32 igb_pll_workaround_i210(struct e1000_hw *hw);
#define E1000_STM_OPCODE 0xDB00
#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
(u8)((invm_dword) & 0x7)
#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
(u8)(((invm_dword) & 0x0000FE00) >> 9)
#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
(u16)(((invm_dword) & 0xFFFF0000) >> 16)
enum E1000_INVM_STRUCTURE_TYPE {
E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00,
E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01,
E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02,
E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03,
E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04,
E1000_INVM_INVALIDATED_STRUCTURE = 0x0F,
};
#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8
#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1
#define E1000_INVM_ULT_BYTES_SIZE 8
#define E1000_INVM_RECORD_SIZE_IN_BYTES 4
#define E1000_INVM_VER_FIELD_ONE 0x1FF8
#define E1000_INVM_VER_FIELD_TWO 0x7FE000
#define E1000_INVM_IMGTYPE_FIELD 0x1F800000
#define E1000_INVM_MAJOR_MASK 0x3F0
#define E1000_INVM_MINOR_MASK 0xF
#define E1000_INVM_MAJOR_SHIFT 4
#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_OFF1_OFF2))
#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_OFF1_ON2))
/* NVM offset defaults for i211 device */
#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243
#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1
#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
/* PLL Defines */
#define E1000_PCI_PMCSR 0x44
#define E1000_PCI_PMCSR_D3 0x03
#define E1000_MAX_PLL_TRIES 5
#define E1000_PHY_PLL_UNCONF 0xFF
#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
#define E1000_PHY_PLL_FREQ_REG 0x000E
#define E1000_INVM_DEFAULT_AL 0x202F
#define E1000_INVM_AUTOLOAD 0x0A
#define E1000_INVM_PLL_WO_VAL 0x0010
#endif