/******************************************************************************
*
* m a s t e r . c
*
* Methoden für einen EtherCAT-Master.
*
* $Id$
*
*****************************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include "../include/ecrt.h"
#include "globals.h"
#include "master.h"
#include "slave.h"
#include "types.h"
#include "device.h"
#include "command.h"
#include "ethernet.h"
/*****************************************************************************/
/**
Konstruktor des EtherCAT-Masters.
*/
void ec_master_init(ec_master_t *master /**< EtherCAT-Master */)
{
master->slaves = NULL;
master->device = NULL;
INIT_LIST_HEAD(&master->command_queue);
INIT_LIST_HEAD(&master->domains);
INIT_LIST_HEAD(&master->eoe_slaves);
ec_command_init(&master->simple_command);
ec_command_init(&master->watch_command);
ec_master_reset(master);
}
/*****************************************************************************/
/**
Destruktor eines EtherCAT-Masters.
Entfernt alle Kommandos aus der Liste, löscht den Zeiger
auf das Slave-Array und gibt die Prozessdaten frei.
*/
void ec_master_clear(ec_master_t *master /**< EtherCAT-Master */)
{
ec_master_reset(master);
if (master->device) {
ec_device_clear(master->device);
kfree(master->device);
}
ec_command_clear(&master->simple_command);
ec_command_clear(&master->watch_command);
}
/*****************************************************************************/
/**
Setzt den Master zurück in den Ausgangszustand.
Bei einem "release" sollte immer diese Funktion aufgerufen werden,
da sonst Slave-Liste, Domains, etc. weiter existieren.
*/
void ec_master_reset(ec_master_t *master
/**< Zeiger auf den zurückzusetzenden Master */
)
{
unsigned int i;
ec_command_t *command, *next_c;
ec_domain_t *domain, *next_d;
ec_eoe_t *eoe, *next_eoe;
// Alle Slaves entfernen
if (master->slaves) {
for (i = 0; i < master->slave_count; i++) {
ec_slave_clear(master->slaves + i);
}
kfree(master->slaves);
master->slaves = NULL;
}
master->slave_count = 0;
// Kommando-Warteschlange leeren
list_for_each_entry_safe(command, next_c, &master->command_queue, queue) {
command->state = EC_CMD_ERROR;
list_del_init(&command->queue);
}
// Domain-Liste leeren
list_for_each_entry_safe(domain, next_d, &master->domains, list) {
list_del(&domain->list);
ec_domain_clear(domain);
kfree(domain);
}
// EOE-Liste leeren
list_for_each_entry_safe(eoe, next_eoe, &master->domains, list) {
list_del(&eoe->list);
ec_eoe_clear(eoe);
kfree(eoe);
}
master->command_index = 0;
master->debug_level = 0;
master->timeout = 500; // 500us
master->slaves_responding = 0;
master->slave_states = EC_SLAVE_STATE_UNKNOWN;
master->stats.timeouts = 0;
master->stats.delayed = 0;
master->stats.corrupted = 0;
master->stats.unmatched = 0;
master->stats.t_last = 0;
}
/*****************************************************************************/
/**
Stellt ein Kommando in die Warteschlange.
*/
void ec_master_queue_command(ec_master_t *master, /**< EtherCAT-Master */
ec_command_t *command /**< Kommando */
)
{
ec_command_t *queued_command;
// Ist das Kommando schon in der Warteschlange?
list_for_each_entry(queued_command, &master->command_queue, queue) {
if (queued_command == command) {
command->state = EC_CMD_QUEUED;
if (unlikely(master->debug_level))
EC_WARN("command already queued.\n");
return;
}
}
list_add_tail(&command->queue, &master->command_queue);
command->state = EC_CMD_QUEUED;
}
/*****************************************************************************/
/**
Sendet die Kommandos in der Warteschlange.
\return 0 bei Erfolg, sonst < 0
*/
void ec_master_send_commands(ec_master_t *master /**< EtherCAT-Master */)
{
ec_command_t *command;
size_t command_size;
uint8_t *frame_data, *cur_data;
void *follows_word;
cycles_t start = 0, end;
if (unlikely(master->debug_level > 0)) {
EC_DBG("ec_master_send\n");
start = get_cycles();
}
// Zeiger auf Socket-Buffer holen
frame_data = ec_device_tx_data(master->device);
cur_data = frame_data + EC_FRAME_HEADER_SIZE;
follows_word = NULL;
// Aktuellen Frame mit Kommandos füllen
list_for_each_entry(command, &master->command_queue, queue) {
if (command->state != EC_CMD_QUEUED) continue;
// Passt das aktuelle Kommando noch in den aktuellen Rahmen?
command_size = EC_COMMAND_HEADER_SIZE + command->data_size
+ EC_COMMAND_FOOTER_SIZE;
if (cur_data - frame_data + command_size > EC_MAX_FRAME_SIZE) break;
command->state = EC_CMD_SENT;
command->index = master->command_index++;
if (unlikely(master->debug_level > 0))
EC_DBG("adding command 0x%02X\n", command->index);
// Command-Following-Flag im letzten Kommando setzen
if (follows_word)
EC_WRITE_U16(follows_word, EC_READ_U16(follows_word) | 0x8000);
// EtherCAT command header
EC_WRITE_U8 (cur_data, command->type);
EC_WRITE_U8 (cur_data + 1, command->index);
EC_WRITE_U32(cur_data + 2, command->address.logical);
EC_WRITE_U16(cur_data + 6, command->data_size & 0x7FF);
EC_WRITE_U16(cur_data + 8, 0x0000);
follows_word = cur_data + 6;
cur_data += EC_COMMAND_HEADER_SIZE;
// EtherCAT command data
memcpy(cur_data, command->data, command->data_size);
cur_data += command->data_size;
// EtherCAT command footer
EC_WRITE_U16(cur_data, 0x0000); // Working counter
cur_data += EC_COMMAND_FOOTER_SIZE;
}
if (cur_data - frame_data == EC_FRAME_HEADER_SIZE) {
if (unlikely(master->debug_level > 0)) EC_DBG("nothing to send.\n");
return;
}
// EtherCAT frame header
EC_WRITE_U16(frame_data, ((cur_data - frame_data
- EC_FRAME_HEADER_SIZE) & 0x7FF) | 0x1000);
// Rahmen auffüllen
while (cur_data - frame_data < EC_MIN_FRAME_SIZE)
EC_WRITE_U8(cur_data++, 0x00);
if (unlikely(master->debug_level > 0))
EC_DBG("Frame size: %i\n", cur_data - frame_data);
// Send frame
ec_device_send(master->device, cur_data - frame_data);
if (unlikely(master->debug_level > 0)) {
end = get_cycles();
EC_DBG("ec_master_send finished in %ius.\n",
(u32) (end - start) * 1000 / cpu_khz);
}
}
/*****************************************************************************/
/**
Wertet einen empfangenen Rahmen aus.
\return 0 bei Erfolg, sonst < 0
*/
void ec_master_receive(ec_master_t *master, /**< EtherCAT-Master */
const uint8_t *frame_data, /**< Empfangene Daten */
size_t size /**< Anzahl empfangene Datenbytes */
)
{
size_t frame_size, data_size;
uint8_t command_type, command_index;
unsigned int cmd_follows, matched;
const uint8_t *cur_data;
ec_command_t *command;
if (unlikely(size < EC_FRAME_HEADER_SIZE)) {
master->stats.corrupted++;
ec_master_output_stats(master);
return;
}
cur_data = frame_data;
// Länge des gesamten Frames prüfen
frame_size = EC_READ_U16(cur_data) & 0x07FF;
cur_data += EC_FRAME_HEADER_SIZE;
if (unlikely(frame_size > size)) {
master->stats.corrupted++;
ec_master_output_stats(master);
return;
}
cmd_follows = 1;
while (cmd_follows) {
// Kommando-Header auswerten
command_type = EC_READ_U8 (cur_data);
command_index = EC_READ_U8 (cur_data + 1);
data_size = EC_READ_U16(cur_data + 6) & 0x07FF;
cmd_follows = EC_READ_U16(cur_data + 6) & 0x8000;
cur_data += EC_COMMAND_HEADER_SIZE;
if (unlikely(cur_data - frame_data
+ data_size + EC_COMMAND_FOOTER_SIZE > size)) {
master->stats.corrupted++;
ec_master_output_stats(master);
return;
}
// Suche passendes Kommando in der Liste
matched = 0;
list_for_each_entry(command, &master->command_queue, queue) {
if (command->state == EC_CMD_SENT
&& command->type == command_type
&& command->index == command_index
&& command->data_size == data_size) {
matched = 1;
break;
}
}
// Kein passendes Kommando in der Liste gefunden
if (!matched) {
master->stats.unmatched++;
ec_master_output_stats(master);
cur_data += data_size + EC_COMMAND_FOOTER_SIZE;
continue;
}
// Empfangene Daten in Kommando-Datenspeicher kopieren
memcpy(command->data, cur_data, data_size);
cur_data += data_size;
// Working-Counter setzen
command->working_counter = EC_READ_U16(cur_data);
cur_data += EC_COMMAND_FOOTER_SIZE;
// Kommando aus der Warteschlange entfernen
command->state = EC_CMD_RECEIVED;
list_del_init(&command->queue);
}
}
/*****************************************************************************/
/**
Sendet ein einzelnes Kommando und wartet auf den Empfang.
Wenn der Slave nicht antwortet, wird das Kommando
nochmals gesendet.
\return 0 bei Erfolg, sonst < 0
*/
int ec_master_simple_io(ec_master_t *master, /**< EtherCAT-Master */
ec_command_t *command /**< Kommando */
)
{
unsigned int response_tries_left;
response_tries_left = 10;
while (1)
{
ec_master_queue_command(master, command);
ecrt_master_sync_io(master);
if (command->state == EC_CMD_RECEIVED) {
if (likely(command->working_counter))
return 0;
}
else if (command->state == EC_CMD_TIMEOUT) {
EC_ERR("Simple-IO TIMEOUT!\n");
return -1;
}
else if (command->state == EC_CMD_ERROR) {
EC_ERR("Simple-IO command error!\n");
return -1;
}
// Keine direkte Antwort. Dem Slave Zeit lassen...
udelay(100);
if (unlikely(--response_tries_left)) {
EC_ERR("No response in simple-IO!\n");
return -1;
}
}
}
/*****************************************************************************/
/**
Durchsucht den EtherCAT-Bus nach Slaves.
Erstellt ein Array mit allen Slave-Informationen die für den
weiteren Betrieb notwendig sind.
\return 0 bei Erfolg, sonst < 0
*/
int ec_master_bus_scan(ec_master_t *master /**< EtherCAT-Master */)
{
ec_slave_t *slave;
ec_slave_ident_t *ident;
unsigned int i;
ec_command_t *command;
ec_eoe_t *eoe;
if (master->slaves || master->slave_count) {
EC_ERR("Slave scan already done!\n");
return -1;
}
command = &master->simple_command;
// Determine number of slaves on bus
if (ec_command_brd(command, 0x0000, 4)) return -1;
if (unlikely(ec_master_simple_io(master, command))) return -1;
master->slave_count = command->working_counter;
EC_INFO("Found %i slaves on bus.\n", master->slave_count);
if (!master->slave_count) return 0;
if (!(master->slaves = (ec_slave_t *) kmalloc(master->slave_count
* sizeof(ec_slave_t),
GFP_KERNEL))) {
EC_ERR("Could not allocate memory for slaves!\n");
return -1;
}
// Init slaves
for (i = 0; i < master->slave_count; i++) {
slave = master->slaves + i;
ec_slave_init(slave, master);
slave->ring_position = i;
slave->station_address = i + 1;
}
// For every slave in the list
for (i = 0; i < master->slave_count; i++)
{
slave = master->slaves + i;
// Write station address
if (ec_command_apwr(command, slave->ring_position,
0x0010, sizeof(uint16_t))) return -1;
EC_WRITE_U16(command->data, slave->station_address);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Writing station address failed on slave %i!\n", i);
return -1;
}
// Fetch all slave information
if (ec_slave_fetch(slave)) return -1;
// Search for identification in "database"
ident = slave_idents;
while (ident->type) {
if (unlikely(ident->vendor_id == slave->sii_vendor_id
&& ident->product_code == slave->sii_product_code)) {
slave->type = ident->type;
break;
}
ident++;
}
if (!slave->type)
EC_WARN("Unknown slave device (vendor 0x%08X, code 0x%08X) at"
" position %i.\n", slave->sii_vendor_id,
slave->sii_product_code, i);
// Does the slave support EoE?
if (slave->sii_mailbox_protocols & EC_MBOX_EOE) {
if (!(eoe = kmalloc(sizeof(ec_eoe_t), GFP_KERNEL))) {
EC_ERR("Failed to allocate memory for EoE-Object.\n");
return -1;
}
ec_eoe_init(eoe, slave);
list_add_tail(&eoe->list, &master->eoe_slaves);
}
}
return 0;
}
/*****************************************************************************/
/**
Statistik-Ausgaben während des zyklischen Betriebs.
Diese Funktion sorgt dafür, dass Statistiken während des zyklischen
Betriebs bei Bedarf, aber nicht zu oft ausgegeben werden.
Die Ausgabe erfolgt gesammelt höchstens einmal pro Sekunde.
*/
void ec_master_output_stats(ec_master_t *master /**< EtherCAT-Master */)
{
cycles_t t_now = get_cycles();
if (unlikely((u32) (t_now - master->stats.t_last) / cpu_khz > 1000)) {
if (master->stats.timeouts) {
EC_WARN("%i commands TIMED OUT!\n", master->stats.timeouts);
master->stats.timeouts = 0;
}
if (master->stats.delayed) {
EC_WARN("%i frame(s) DELAYED!\n", master->stats.delayed);
master->stats.delayed = 0;
}
if (master->stats.corrupted) {
EC_WARN("%i frame(s) CORRUPTED!\n", master->stats.corrupted);
master->stats.corrupted = 0;
}
if (master->stats.unmatched) {
EC_WARN("%i command(s) UNMATCHED!\n", master->stats.unmatched);
master->stats.unmatched = 0;
}
if (master->stats.eoe_errors) {
EC_WARN("%i EOE ERROR(S)!\n", master->stats.eoe_errors);
master->stats.eoe_errors = 0;
}
master->stats.t_last = t_now;
}
}
/*****************************************************************************/
/**
Wandelt eine ASCII-kodierte Bus-Adresse in einen Slave-Zeiger.
Gültige Adress-Strings sind Folgende:
- \a "X" = der X. Slave im Bus,
- \a "X:Y" = der Y. Slave hinter dem X. Buskoppler,
- \a "#X" = der Slave mit dem Alias X,
- \a "#X:Y" = der Y. Slave hinter dem Buskoppler mit dem Alias X.
X und Y fangen immer bei 0 an und können auch hexadezimal oder oktal
angegeben werden (mit entsprechendem Prefix).
\return Zeiger auf Slave bei Erfolg, sonst NULL
*/
ec_slave_t *ecrt_master_get_slave(const ec_master_t *master, /**< Master */
const char *address /**< Address-String */
)
{
unsigned long first, second;
char *remainder, *remainder2;
unsigned int i, alias_requested, alias_slave_index, alias_found;
int coupler_idx, slave_idx;
ec_slave_t *slave;
if (!address || address[0] == 0) return NULL;
alias_requested = 0;
alias_slave_index = 0;
if (address[0] == '#') {
alias_requested = 1;
address++;
}
first = simple_strtoul(address, &remainder, 0);
if (remainder == address) {
EC_ERR("Slave address \"%s\" - First number empty!\n", address);
return NULL;
}
if (alias_requested) {
alias_found = 0;
for (i = 0; i < master->slave_count; i++) {
if (master->slaves[i].sii_alias == first) {
alias_slave_index = i;
alias_found = 1;
break;
}
}
if (!alias_found) {
EC_ERR("Slave address \"%s\" - Alias not found!\n", address);
return NULL;
}
}
if (!remainder[0]) { // absolute position
if (alias_requested) {
return master->slaves + alias_slave_index;
}
else {
if (first < master->slave_count) {
return master->slaves + first;
}
EC_ERR("Slave address \"%s\" - Absolute position invalid!\n",
address);
}
}
else if (remainder[0] == ':') { // field position
remainder++;
second = simple_strtoul(remainder, &remainder2, 0);
if (remainder2 == remainder) {
EC_ERR("Slave address \"%s\" - Second number empty!\n", address);
return NULL;
}
if (remainder2[0]) {
EC_ERR("Slave address \"%s\" - Invalid trailer!\n", address);
return NULL;
}
if (alias_requested) {
for (i = alias_slave_index + 1; i < master->slave_count; i++) {
slave = master->slaves + i;
if (!slave->type ||
slave->type->special == EC_TYPE_BUS_COUPLER) break;
if (i - alias_slave_index == second) return slave;
}
EC_ERR("Slave address \"%s\" - Bus coupler %i has no %lu. slave"
" following!\n", address,
(master->slaves + alias_slave_index)->ring_position,
second);
return NULL;
}
else {
coupler_idx = -1;
slave_idx = 0;
for (i = 0; i < master->slave_count; i++, slave_idx++) {
slave = master->slaves + i;
if (!slave->type) continue;
if (slave->type->special == EC_TYPE_BUS_COUPLER) {
coupler_idx++;
slave_idx = 0;
}
if (coupler_idx == first && slave_idx == second) return slave;
}
}
}
else
EC_ERR("Slave address \"%s\" - Invalid format!\n", address);
return NULL;
}
/*****************************************************************************/
/**
Initialisiert eine Sync-Manager-Konfigurationsseite.
Der mit \a data referenzierte Speicher muss mindestens EC_SYNC_SIZE Bytes
groß sein.
*/
void ec_sync_config(const ec_sync_t *sync, /**< Sync-Manager */
uint8_t *data /**> Zeiger auf Konfigurationsspeicher */
)
{
EC_WRITE_U16(data, sync->physical_start_address);
EC_WRITE_U16(data + 2, sync->size);
EC_WRITE_U8 (data + 4, sync->control_byte);
EC_WRITE_U8 (data + 5, 0x00); // status byte (read only)
EC_WRITE_U16(data + 6, 0x0001); // enable
}
/*****************************************************************************/
/**
Initialisiert eine Sync-Manager-Konfigurationsseite mit EEPROM-Daten.
Der mit \a data referenzierte Speicher muss mindestens EC_SYNC_SIZE Bytes
groß sein.
*/
void ec_eeprom_sync_config(const ec_eeprom_sync_t *sync, /**< Sync-Manager */
uint8_t *data /**> Zeiger auf Konfig.-Speicher */
)
{
EC_WRITE_U16(data, sync->physical_start_address);
EC_WRITE_U16(data + 2, sync->length);
EC_WRITE_U8 (data + 4, sync->control_register);
EC_WRITE_U8 (data + 5, 0x00); // status byte (read only)
EC_WRITE_U16(data + 6, sync->enable ? 0x0001 : 0x0000); // enable
}
/*****************************************************************************/
/**
Initialisiert eine FMMU-Konfigurationsseite.
Der mit \a data referenzierte Speicher muss mindestens EC_FMMU_SIZE Bytes
groß sein.
*/
void ec_fmmu_config(const ec_fmmu_t *fmmu, /**< Sync-Manager */
uint8_t *data /**> Zeiger auf Konfigurationsspeicher */
)
{
EC_WRITE_U32(data, fmmu->logical_start_address);
EC_WRITE_U16(data + 4, fmmu->sync->size);
EC_WRITE_U8 (data + 6, 0x00); // Logical start bit
EC_WRITE_U8 (data + 7, 0x07); // Logical end bit
EC_WRITE_U16(data + 8, fmmu->sync->physical_start_address);
EC_WRITE_U8 (data + 10, 0x00); // Physical start bit
EC_WRITE_U8 (data + 11, (fmmu->sync->control_byte & 0x04) ? 0x02 : 0x01);
EC_WRITE_U16(data + 12, 0x0001); // Enable
EC_WRITE_U16(data + 14, 0x0000); // res.
}
/*****************************************************************************/
/**
Gibt Überwachungsinformationen aus.
*/
void ec_master_process_watch_command(ec_master_t *master
/**< EtherCAT-Master */
)
{
unsigned int first;
if (unlikely(master->watch_command.state == EC_CMD_INIT)) return;
first = 1;
if (master->watch_command.working_counter != master->slaves_responding ||
master->watch_command.data[0] != master->slave_states)
{
master->slaves_responding = master->watch_command.working_counter;
master->slave_states = master->watch_command.data[0];
EC_INFO("%i slave%s responding (", master->slaves_responding,
master->slaves_responding == 1 ? "" : "s");
if (master->slave_states & EC_SLAVE_STATE_INIT) {
printk("INIT");
first = 0;
}
if (master->slave_states & EC_SLAVE_STATE_PREOP) {
if (!first) printk(", ");
printk("PREOP");
first = 0;
}
if (master->slave_states & EC_SLAVE_STATE_SAVEOP) {
if (!first) printk(", ");
printk("SAVEOP");
first = 0;
}
if (master->slave_states & EC_SLAVE_STATE_OP) {
if (!first) printk(", ");
printk("OP");
}
printk(")\n");
}
}
/******************************************************************************
*
* Echtzeitschnittstelle
*
*****************************************************************************/
/**
Erstellt eine neue Domäne.
\return Zeiger auf die Domäne bei Erfolg, sonst NULL.
*/
ec_domain_t *ecrt_master_create_domain(ec_master_t *master /**< Master */)
{
ec_domain_t *domain;
if (!(domain = (ec_domain_t *) kmalloc(sizeof(ec_domain_t), GFP_KERNEL))) {
EC_ERR("Error allocating domain memory!\n");
return NULL;
}
ec_domain_init(domain, master);
list_add_tail(&domain->list, &master->domains);
return domain;
}
/*****************************************************************************/
/**
Konfiguriert alle Slaves und setzt den Operational-Zustand.
Führt die komplette Konfiguration und Aktivierunge aller registrierten
Slaves durch. Setzt Sync-Manager und FMMUs, führt die entsprechenden
Zustandsübergänge durch, bis der Slave betriebsbereit ist.
\return 0 bei Erfolg, sonst < 0
*/
int ecrt_master_activate(ec_master_t *master /**< EtherCAT-Master */)
{
unsigned int i, j;
ec_slave_t *slave;
ec_command_t *command;
const ec_sync_t *sync;
const ec_slave_type_t *type;
const ec_fmmu_t *fmmu;
uint32_t domain_offset;
ec_domain_t *domain;
ec_eeprom_sync_t *eeprom_sync, mbox_sync;
command = &master->simple_command;
if (ec_command_brd(&master->watch_command, 0x130, 2)) {
EC_ERR("Failed to allocate watchdog command!\n");
return -1;
}
// Domains erstellen
domain_offset = 0;
list_for_each_entry(domain, &master->domains, list) {
if (ec_domain_alloc(domain, domain_offset)) {
EC_ERR("Failed to allocate domain %X!\n", (u32) domain);
return -1;
}
domain_offset += domain->data_size;
}
// Slaves aktivieren
for (i = 0; i < master->slave_count; i++)
{
slave = master->slaves + i;
// Change state to INIT
if (unlikely(ec_slave_state_change(slave, EC_SLAVE_STATE_INIT)))
return -1;
// Check if slave was registered...
type = slave->type;
if (!type) EC_WARN("Slave %i has unknown type!\n", i);
// Check and reset CRC fault counters
ec_slave_check_crc(slave);
// Resetting FMMUs
if (slave->base_fmmu_count) {
if (ec_command_npwr(command, slave->station_address, 0x0600,
EC_FMMU_SIZE * slave->base_fmmu_count))
return -1;
memset(command->data, 0x00, EC_FMMU_SIZE * slave->base_fmmu_count);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Resetting FMMUs failed on slave %i!\n",
slave->ring_position);
return -1;
}
}
// Resetting Sync Manager channels
if (slave->base_sync_count) {
if (ec_command_npwr(command, slave->station_address, 0x0800,
EC_SYNC_SIZE * slave->base_sync_count))
return -1;
memset(command->data, 0x00, EC_SYNC_SIZE * slave->base_sync_count);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Resetting sync managers failed on slave %i!\n",
slave->ring_position);
return -1;
}
}
// Set Sync Managers
// Known slave type, take type's SM information
if (type) {
for (j = 0; type->sync_managers[j] && j < EC_MAX_SYNC; j++)
{
sync = type->sync_managers[j];
if (ec_command_npwr(command, slave->station_address,
0x0800 + j * EC_SYNC_SIZE, EC_SYNC_SIZE))
return -1;
ec_sync_config(sync, command->data);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Setting sync manager %i failed on slave %i!\n",
j, slave->ring_position);
return -1;
}
}
}
// Unknown slave type, but has mailbox
else if (slave->sii_mailbox_protocols) {
// Does the device supply SM configurations in its EEPROM?
if (!list_empty(&slave->eeprom_syncs)) {
list_for_each_entry(eeprom_sync, &slave->eeprom_syncs, list) {
EC_INFO("Sync manager %i...\n", eeprom_sync->index);
if (ec_command_npwr(command, slave->station_address,
0x800 + eeprom_sync->index *
EC_SYNC_SIZE,
EC_SYNC_SIZE)) return -1;
ec_eeprom_sync_config(eeprom_sync, command->data);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Setting sync manager %i failed on slave %i!\n",
eeprom_sync->index, slave->ring_position);
return -1;
}
}
}
// No sync manager information; guess mailbox settings
else {
mbox_sync.physical_start_address =
slave->sii_rx_mailbox_offset;
mbox_sync.length = slave->sii_rx_mailbox_size;
mbox_sync.control_register = 0x26;
mbox_sync.enable = 1;
if (ec_command_npwr(command, slave->station_address,
0x800,EC_SYNC_SIZE)) return -1;
ec_eeprom_sync_config(&mbox_sync, command->data);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Setting sync manager 0 failed on slave %i!\n",
slave->ring_position);
return -1;
}
mbox_sync.physical_start_address =
slave->sii_tx_mailbox_offset;
mbox_sync.length = slave->sii_tx_mailbox_size;
mbox_sync.control_register = 0x22;
mbox_sync.enable = 1;
if (ec_command_npwr(command, slave->station_address,
0x808, EC_SYNC_SIZE)) return -1;
ec_eeprom_sync_config(&mbox_sync, command->data);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Setting sync manager 1 failed on slave %i!\n",
slave->ring_position);
return -1;
}
}
EC_INFO("Mailbox configured for unknown slave %i\n",
slave->ring_position);
}
// Change state to PREOP
if (unlikely(ec_slave_state_change(slave, EC_SLAVE_STATE_PREOP)))
return -1;
// Stop activation here for slaves without type
if (!type) continue;
// Slaves that are not registered are only brought into PREOP
// state -> nice blinking and mailbox communication possible
if (!slave->registered && !slave->type->special) {
EC_WARN("Slave %i was not registered!\n", slave->ring_position);
continue;
}
// Set FMMUs
for (j = 0; j < slave->fmmu_count; j++)
{
fmmu = &slave->fmmus[j];
if (ec_command_npwr(command, slave->station_address,
0x0600 + j * EC_FMMU_SIZE, EC_FMMU_SIZE))
return -1;
ec_fmmu_config(fmmu, command->data);
if (unlikely(ec_master_simple_io(master, command))) {
EC_ERR("Setting FMMU %i failed on slave %i!\n",
j, slave->ring_position);
return -1;
}
}
// Change state to SAVEOP
if (unlikely(ec_slave_state_change(slave, EC_SLAVE_STATE_SAVEOP)))
return -1;
// Change state to OP
if (unlikely(ec_slave_state_change(slave, EC_SLAVE_STATE_OP)))
return -1;
}
master->slaves_responding = master->slave_count;
master->slave_states = EC_SLAVE_STATE_OP;
return 0;
}
/*****************************************************************************/
/**
Setzt alle Slaves zurück in den Init-Zustand.
*/
void ecrt_master_deactivate(ec_master_t *master /**< EtherCAT-Master */)
{
ec_slave_t *slave;
unsigned int i;
for (i = 0; i < master->slave_count; i++)
{
slave = master->slaves + i;
ec_slave_check_crc(slave);
ec_slave_state_change(slave, EC_SLAVE_STATE_INIT);
}
}
/*****************************************************************************/
/**
Lädt die SDO-Dictionaries aller Slaves.
Slaves, die kein CoE unterstützen, werden ausgelassen.
\return 0 wenn alles ok, sonst < 0
*/
int ecrt_master_fetch_sdo_lists(ec_master_t *master /**< EtherCAT-Master */)
{
ec_slave_t *slave;
unsigned int i;
for (i = 0; i < master->slave_count; i++) {
slave = master->slaves + i;
if (slave->sii_mailbox_protocols & EC_MBOX_COE) {
if (unlikely(ec_slave_fetch_sdo_list(slave))) {
EC_ERR("Failed to fetch SDO list on slave %i!\n",
slave->ring_position);
return -1;
}
}
}
return 0;
}
/*****************************************************************************/
/**
Sendet und empfängt Kommandos synchron.
*/
void ecrt_master_sync_io(ec_master_t *master)
{
ec_command_t *command, *n;
unsigned int commands_sent;
cycles_t t_start, t_end, t_timeout;
// Kommandos senden
ecrt_master_async_send(master);
t_start = get_cycles(); // Sendezeit nehmen
t_timeout = (cycles_t) master->timeout * (cpu_khz / 1000);
while (1) // Aktiv auf Empfang warten
{
ec_device_call_isr(master->device);
t_end = get_cycles(); // Aktuelle Zeit nehmen
if (t_end - t_start >= t_timeout) break; // Timeout
commands_sent = 0;
list_for_each_entry_safe(command, n, &master->command_queue, queue) {
if (command->state == EC_CMD_RECEIVED)
list_del_init(&command->queue);
else if (command->state == EC_CMD_SENT)
commands_sent++;
}
if (!commands_sent) break;
}
// Zeit abgelaufen. Alle verbleibenden Kommandos entfernen.
list_for_each_entry_safe(command, n, &master->command_queue, queue) {
switch (command->state) {
case EC_CMD_SENT:
case EC_CMD_QUEUED:
command->state = EC_CMD_TIMEOUT;
master->stats.timeouts++;
ec_master_output_stats(master);
break;
case EC_CMD_RECEIVED:
master->stats.delayed++;
ec_master_output_stats(master);
break;
default:
break;
}
list_del_init(&command->queue);
}
}
/*****************************************************************************/
/**
Sendet Kommandos asynchron.
*/
void ecrt_master_async_send(ec_master_t *master)
{
ec_command_t *command, *n;
if (unlikely(!master->device->link_state)) {
// Link DOWN, keines der Kommandos kann gesendet werden.
list_for_each_entry_safe(command, n, &master->command_queue, queue) {
command->state = EC_CMD_ERROR;
list_del_init(&command->queue);
}
// Device-Zustand abfragen
ec_device_call_isr(master->device);
return;
}
// Rahmen senden
ec_master_send_commands(master);
}
/*****************************************************************************/
/**
Empfängt Kommandos asynchron.
*/
void ecrt_master_async_receive(ec_master_t *master)
{
ec_command_t *command, *next;
ec_device_call_isr(master->device);
// Alle empfangenen Kommandos aus der Liste entfernen
list_for_each_entry_safe(command, next, &master->command_queue, queue)
if (command->state == EC_CMD_RECEIVED) list_del_init(&command->queue);
// Alle verbleibenden Kommandos entfernen.
list_for_each_entry_safe(command, next, &master->command_queue, queue) {
switch (command->state) {
case EC_CMD_SENT:
case EC_CMD_QUEUED:
command->state = EC_CMD_TIMEOUT;
master->stats.timeouts++;
ec_master_output_stats(master);
break;
default:
break;
}
list_del_init(&command->queue);
}
}
/*****************************************************************************/
/**
Bereitet Synchronen Datenverkehr vor.
Fürgt einmal die Kommandos aller Domains zur Warteschlange hinzu, sendet
diese ab und wartet so lange, bis diese anschließend problemlos empfangen
werden können.
*/
void ecrt_master_prepare_async_io(ec_master_t *master)
{
ec_domain_t *domain;
cycles_t t_start, t_end, t_timeout;
// Kommandos aller Domains in die Warteschlange setzen
list_for_each_entry(domain, &master->domains, list)
ecrt_domain_queue(domain);
ecrt_master_async_send(master);
t_start = get_cycles(); // Sendezeit nehmen
t_timeout = (cycles_t) master->timeout * (cpu_khz / 1000);
// Aktiv warten!
while (1) {
t_end = get_cycles();
if (t_end - t_start >= t_timeout) break;
}
}
/*****************************************************************************/
/**
Führt Routinen im zyklischen Betrieb aus.
*/
void ecrt_master_run(ec_master_t *master /**< EtherCAT-Master */)
{
// Statistiken ausgeben
ec_master_output_stats(master);
// Watchdog-Kommando
ec_master_process_watch_command(master);
ec_master_queue_command(master, &master->watch_command);
// Ethernet-over-EtherCAT
ec_master_run_eoe(master);
}
/*****************************************************************************/
/**
Setzt die Debug-Ebene des Masters.
Folgende Debug-Level sind definiert:
- 1: Nur Positionsmarken in bestimmten Funktionen
- 2: Komplette Frame-Inhalte
*/
void ecrt_master_debug(ec_master_t *master, /**< EtherCAT-Master */
int level /**< Debug-Level */
)
{
if (level != master->debug_level) {
master->debug_level = level;
EC_INFO("Master debug level set to %i.\n", level);
}
}
/*****************************************************************************/
/**
Gibt alle Informationen zum Master aus.
Verbosity:
0 - Nur Slavetypen und Adressen
1 - mit EEPROM-Informationen
>1 - mit SDO-Dictionaries
*/
void ecrt_master_print(const ec_master_t *master, /**< EtherCAT-Master */
unsigned int verbosity /**< Geschwätzigkeit */
)
{
unsigned int i;
ec_eoe_t *eoe;
EC_INFO("*** Begin master information ***\n");
if (master->slave_count) {
EC_INFO("Slave list:\n");
for (i = 0; i < master->slave_count; i++)
ec_slave_print(&master->slaves[i], verbosity);
}
if (!list_empty(&master->eoe_slaves)) {
EC_INFO("Ethernet-over-EtherCAT (EoE) objects:\n");
list_for_each_entry(eoe, &master->eoe_slaves, list) {
ec_eoe_print(eoe);
}
}
EC_INFO("*** End master information ***\n");
}
/*****************************************************************************/
void ec_master_run_eoe(ec_master_t *master /**< EtherCAT-Master */)
{
ec_eoe_t *eoe;
list_for_each_entry(eoe, &master->eoe_slaves, list) {
ec_eoe_run(eoe);
}
}
/*****************************************************************************/
EXPORT_SYMBOL(ecrt_master_create_domain);
EXPORT_SYMBOL(ecrt_master_activate);
EXPORT_SYMBOL(ecrt_master_deactivate);
EXPORT_SYMBOL(ecrt_master_fetch_sdo_lists);
EXPORT_SYMBOL(ecrt_master_prepare_async_io);
EXPORT_SYMBOL(ecrt_master_sync_io);
EXPORT_SYMBOL(ecrt_master_async_send);
EXPORT_SYMBOL(ecrt_master_async_receive);
EXPORT_SYMBOL(ecrt_master_run);
EXPORT_SYMBOL(ecrt_master_debug);
EXPORT_SYMBOL(ecrt_master_print);
EXPORT_SYMBOL(ecrt_master_get_slave);
/*****************************************************************************/
/* Emacs-Konfiguration
;;; Local Variables: ***
;;; c-basic-offset:4 ***
;;; End: ***
*/