Don't show Pdo (entry) names in configuration output.
/******************************************************************************
*
* $Id$
*
* Copyright (C) 2006 Florian Pose, Ingenieurgemeinschaft IgH
*
* This file is part of the IgH EtherCAT Master.
*
* The IgH EtherCAT Master is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* The IgH EtherCAT Master is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the IgH EtherCAT Master; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The right to use EtherCAT Technology is granted and comes free of
* charge under condition of compatibility of product made by
* Licensee. People intending to distribute/sell products based on the
* code, have to sign an agreement to guarantee that products using
* software based on IgH EtherCAT master stay compatible with the actual
* EtherCAT specification (which are released themselves as an open
* standard) as the (only) precondition to have the right to use EtherCAT
* Technology, IP and trade marks.
*
*****************************************************************************/
/** \file
* EtherCAT FMMU configuration methods.
*/
/*****************************************************************************/
#include "globals.h"
#include "slave_config.h"
#include "master.h"
#include "fmmu_config.h"
/*****************************************************************************/
/** FMMU configuration constructor.
*
* Inits an FMMU configuration, sets the logical start address and adds the
* process data size for the mapped Pdos of the given direction to the domain
* data size.
*/
void ec_fmmu_config_init(
ec_fmmu_config_t *fmmu, /**< EtherCAT FMMU configuration. */
ec_slave_config_t *sc, /**< EtherCAT slave configuration. */
ec_domain_t *domain, /**< EtherCAT domain. */
uint8_t sync_index, /**< Sync manager index to use. */
ec_direction_t dir /**< Pdo direction. */
)
{
INIT_LIST_HEAD(&fmmu->list);
fmmu->sc = sc;
fmmu->sync_index = sync_index;
fmmu->dir = dir;
fmmu->logical_start_address = domain->data_size;
fmmu->data_size = ec_pdo_list_total_size(
&sc->sync_configs[sync_index].pdos);
ec_domain_add_fmmu_config(domain, fmmu);
}
/*****************************************************************************/
/** Initializes an FMMU configuration page.
*
* The referenced memory (\a data) must be at least EC_FMMU_PAGE_SIZE bytes.
*/
void ec_fmmu_config_page(
const ec_fmmu_config_t *fmmu, /**< EtherCAT FMMU configuration. */
const ec_sync_t *sync, /**< Sync manager. */
uint8_t *data /**> Configuration page memory. */
)
{
if (fmmu->sc->master->debug_level) {
EC_DBG("FMMU: LogAddr 0x%08X, Size %3u, PhysAddr 0x%04X, SM%u, "
"Dir %s\n", fmmu->logical_start_address, fmmu->data_size,
sync->physical_start_address, fmmu->sync_index,
fmmu->dir == EC_DIR_INPUT ? "in" : "out");
}
EC_WRITE_U32(data, fmmu->logical_start_address);
EC_WRITE_U16(data + 4, fmmu->data_size); // size of fmmu
EC_WRITE_U8 (data + 6, 0x00); // logical start bit
EC_WRITE_U8 (data + 7, 0x07); // logical end bit
EC_WRITE_U16(data + 8, sync->physical_start_address);
EC_WRITE_U8 (data + 10, 0x00); // physical start bit
EC_WRITE_U8 (data + 11, fmmu->dir == EC_DIR_INPUT ? 0x01 : 0x02);
EC_WRITE_U16(data + 12, 0x0001); // enable
EC_WRITE_U16(data + 14, 0x0000); // reserved
}
/*****************************************************************************/