State acknowledgement in master state machine.
#------------------------------------------------------------------------------
#
# EtherCAT sysconfig file
#
# $Id$
#
#------------------------------------------------------------------------------
#
# PCI index of the (RTL8139-)EtherCAT device
# Setting this is mandatory for the EtherCAT init script!
#
#DEVICE_INDEX=99
#
# Number of Ethernet-over-EtherCAT interfaces every master shall create
# on startup. Default is 0.
#
#EOE_INTERFACES=0
#
# Bridge all EoE interfaces after master startup
# This variable shall contain the name of the EoE bridge to set up.
# If the variable is empty or undefined, no EoE bridge will be built.
#
#EOE_BRIDGE=eoebr0
#
# IP address of the EoE bridge
# Set both EOE_IP_ADDRESS and EOE_IP_NETMASK to let the local host communicate
# with devices on the EoE bridge.
#
#EOE_IP_ADDRESS=192.168.X.X
#
# IP netmask of the EoE bridge
# See EOE_IP_ADDRESS.
#
#EOE_IP_NETMASK=255.255.255.0
#
# Renew default gateway after bridge installation.
# Set this to the new default gateway, if the default route shall
# be renewed after the bridge has been installed.
#
#EOE_GATEWAY=192.168.X.X
#
# List of extra interfaces to include in the EoE bridge.
# Set this to interconnect the EoE bridge with other local interfaces.
# If EOE_BRIDGE is empty or undefined, setting this variable has no effect.
# Important: The IP address of these interfaces will be cleared. Set
# EOE_IP_ADDRESS and EOE_IP_NETMASK accordingly to enable IP traffic to
# extra interfaces.
#
#EOE_EXTRA_INTERFACES=eth0
#------------------------------------------------------------------------------