--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/e1000/e1000_main-2.6.18-orig.c Fri Aug 10 15:27:08 2007 +0000
@@ -0,0 +1,4876 @@
+/*******************************************************************************
+
+
+ Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+char e1000_driver_name[] = "e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#ifndef CONFIG_E1000_NAPI
+#define DRIVERNAPI
+#else
+#define DRIVERNAPI "-NAPI"
+#endif
+#define DRV_VERSION "7.1.9-k4"DRIVERNAPI
+char e1000_driver_version[] = DRV_VERSION;
+static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static struct pci_device_id e1000_pci_tbl[] = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1049),
+ INTEL_E1000_ETHERNET_DEVICE(0x104A),
+ INTEL_E1000_ETHERNET_DEVICE(0x104B),
+ INTEL_E1000_ETHERNET_DEVICE(0x104C),
+ INTEL_E1000_ETHERNET_DEVICE(0x104D),
+ INTEL_E1000_ETHERNET_DEVICE(0x105E),
+ INTEL_E1000_ETHERNET_DEVICE(0x105F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1060),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x107D),
+ INTEL_E1000_ETHERNET_DEVICE(0x107E),
+ INTEL_E1000_ETHERNET_DEVICE(0x107F),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x108B),
+ INTEL_E1000_ETHERNET_DEVICE(0x108C),
+ INTEL_E1000_ETHERNET_DEVICE(0x1096),
+ INTEL_E1000_ETHERNET_DEVICE(0x1098),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x109A),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B9),
+ INTEL_E1000_ETHERNET_DEVICE(0x10BA),
+ INTEL_E1000_ETHERNET_DEVICE(0x10BB),
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+
+/* Local Function Prototypes */
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_multi(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs);
+static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+#ifdef CONFIG_E1000_NAPI
+static int e1000_clean(struct net_device *poll_dev, int *budget);
+static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+#else
+static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+#endif
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct net_device *dev);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+#ifdef CONFIG_PM
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+ /* Power Managment Hooks */
+ .suspend = e1000_suspend,
+#ifdef CONFIG_PM
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init
+e1000_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ e1000_driver_string, e1000_driver_version);
+
+ printk(KERN_INFO "%s\n", e1000_copyright);
+
+ ret = pci_module_init(&e1000_driver);
+
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit
+e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int flags, err = 0;
+
+ flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+ if (adapter->hw.mac_type > e1000_82547_rev_2) {
+ adapter->have_msi = TRUE;
+ if ((err = pci_enable_msi(adapter->pdev))) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate MSI interrupt Error: %d\n", err);
+ adapter->have_msi = FALSE;
+ }
+ }
+ if (adapter->have_msi)
+ flags &= ~IRQF_SHARED;
+#endif
+ if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
+ netdev->name, netdev)))
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+
+#ifdef CONFIG_PCI_MSI
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+#endif
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ atomic_inc(&adapter->irq_sem);
+ E1000_WRITE_REG(&adapter->hw, IMC, ~0);
+ E1000_WRITE_FLUSH(&adapter->hw);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
+ E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH(&adapter->hw);
+ }
+}
+
+static void
+e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ uint16_t vid = adapter->hw.mng_cookie.vlan_id;
+ uint16_t old_vid = adapter->mng_vlan_id;
+ if (adapter->vlgrp) {
+ if (!adapter->vlgrp->vlan_devices[vid]) {
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+
+ if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !adapter->vlgrp->vlan_devices[old_vid])
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+/**
+ * e1000_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded. For AMT version (only with 82573) i
+ * of the f/w this means that the netowrk i/f is closed.
+ *
+ **/
+
+static void
+e1000_release_hw_control(struct e1000_adapter *adapter)
+{
+ uint32_t ctrl_ext;
+ uint32_t swsm;
+ uint32_t extcnf;
+
+ /* Let firmware taken over control of h/w */
+ switch (adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm & ~E1000_SWSM_DRV_LOAD);
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * e1000_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
+ * of the f/w this means that the netowrk i/f is open.
+ *
+ **/
+
+static void
+e1000_get_hw_control(struct e1000_adapter *adapter)
+{
+ uint32_t ctrl_ext;
+ uint32_t swsm;
+ uint32_t extcnf;
+ /* Let firmware know the driver has taken over */
+ switch (adapter->hw.mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ break;
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_ich8lan:
+ extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+ E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+ extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+ break;
+ default:
+ break;
+ }
+}
+
+int
+e1000_up(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+
+ e1000_set_multi(netdev);
+
+ e1000_restore_vlan(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+
+ adapter->tx_queue_len = netdev->tx_queue_len;
+
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_enable(netdev);
+#endif
+ e1000_irq_enable(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+static void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ uint16_t mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (adapter->hw.media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
+ e1000_check_mng_mode(&adapter->hw);
+ /* Power down the PHY so no link is implied when interface is down
+ * The PHY cannot be powered down if any of the following is TRUE
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
+ adapter->hw.media_type == e1000_media_type_copper &&
+ !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+ !mng_mode_enabled &&
+ !e1000_check_phy_reset_block(&adapter->hw)) {
+ uint16_t mii_reg = 0;
+ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+}
+
+void
+e1000_down(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_disable(netdev);
+#endif
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+void
+e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void
+e1000_reset(struct e1000_adapter *adapter)
+{
+ uint32_t pba, manc;
+ uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (adapter->hw.mac_type) {
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ pba = E1000_PBA_38K;
+ break;
+ case e1000_82573:
+ pba = E1000_PBA_12K;
+ break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ break;
+ default:
+ pba = E1000_PBA_48K;
+ break;
+ }
+
+ if ((adapter->hw.mac_type != e1000_82573) &&
+ (adapter->netdev->mtu > E1000_RXBUFFER_8192))
+ pba -= 8; /* allocate more FIFO for Tx */
+
+
+ if (adapter->hw.mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+
+ E1000_WRITE_REG(&adapter->hw, PBA, pba);
+
+ /* flow control settings */
+ /* Set the FC high water mark to 90% of the FIFO size.
+ * Required to clear last 3 LSB */
+ fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+ /* We can't use 90% on small FIFOs because the remainder
+ * would be less than 1 full frame. In this case, we size
+ * it to allow at least a full frame above the high water
+ * mark. */
+ if (pba < E1000_PBA_16K)
+ fc_high_water_mark = (pba * 1024) - 1600;
+
+ adapter->hw.fc_high_water = fc_high_water_mark;
+ adapter->hw.fc_low_water = fc_high_water_mark - 8;
+ if (adapter->hw.mac_type == e1000_80003es2lan)
+ adapter->hw.fc_pause_time = 0xFFFF;
+ else
+ adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
+ adapter->hw.fc_send_xon = 1;
+ adapter->hw.fc = adapter->hw.original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(&adapter->hw);
+ if (adapter->hw.mac_type >= e1000_82544)
+ E1000_WRITE_REG(&adapter->hw, WUC, 0);
+ if (e1000_init_hw(&adapter->hw))
+ DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(&adapter->hw);
+ e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+
+ if (!adapter->smart_power_down &&
+ (adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572)) {
+ uint16_t phy_data = 0;
+ /* speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed */
+ e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+ &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
+ e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+ phy_data);
+ }
+
+ if (adapter->hw.mac_type < e1000_ich8lan)
+ /* FIXME: this code is duplicate and wrong for PCI Express */
+ if (adapter->en_mng_pt) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+}
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+
+static int __devinit
+e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ unsigned long mmio_start, mmio_len;
+ unsigned long flash_start, flash_len;
+
+ static int cards_found = 0;
+ static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ uint16_t eeprom_data;
+ uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
+ if ((err = pci_enable_device(pdev)))
+ return err;
+
+ if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+ !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
+ pci_using_dac = 1;
+ } else {
+ if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+ (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
+ E1000_ERR("No usable DMA configuration, aborting\n");
+ return err;
+ }
+ pci_using_dac = 0;
+ }
+
+ if ((err = pci_request_regions(pdev, e1000_driver_name)))
+ return err;
+
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->hw.back = adapter;
+ adapter->msg_enable = (1 << debug) - 1;
+
+ mmio_start = pci_resource_start(pdev, BAR_0);
+ mmio_len = pci_resource_len(pdev, BAR_0);
+
+ adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+ if (!adapter->hw.hw_addr) {
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ adapter->hw.io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+
+ netdev->open = &e1000_open;
+ netdev->stop = &e1000_close;
+ netdev->hard_start_xmit = &e1000_xmit_frame;
+ netdev->get_stats = &e1000_get_stats;
+ netdev->set_multicast_list = &e1000_set_multi;
+ netdev->set_mac_address = &e1000_set_mac;
+ netdev->change_mtu = &e1000_change_mtu;
+ netdev->do_ioctl = &e1000_ioctl;
+ e1000_set_ethtool_ops(netdev);
+ netdev->tx_timeout = &e1000_tx_timeout;
+ netdev->watchdog_timeo = 5 * HZ;
+#ifdef CONFIG_E1000_NAPI
+ netdev->poll = &e1000_clean;
+ netdev->weight = 64;
+#endif
+ netdev->vlan_rx_register = e1000_vlan_rx_register;
+ netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
+ netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = e1000_netpoll;
+#endif
+ strcpy(netdev->name, pci_name(pdev));
+
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len;
+ netdev->base_addr = adapter->hw.io_base;
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ if ((err = e1000_sw_init(adapter)))
+ goto err_sw_init;
+
+ /* Flash BAR mapping must happen after e1000_sw_init
+ * because it depends on mac_type */
+ if ((adapter->hw.mac_type == e1000_ich8lan) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ flash_start = pci_resource_start(pdev, 1);
+ flash_len = pci_resource_len(pdev, 1);
+ adapter->hw.flash_address = ioremap(flash_start, flash_len);
+ if (!adapter->hw.flash_address) {
+ err = -EIO;
+ goto err_flashmap;
+ }
+ }
+
+ if ((err = e1000_check_phy_reset_block(&adapter->hw)))
+ DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
+
+ /* if ksp3, indicate if it's port a being setup */
+ if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
+ e1000_ksp3_port_a == 0)
+ adapter->ksp3_port_a = 1;
+ e1000_ksp3_port_a++;
+ /* Reset for multiple KP3 adapters */
+ if (e1000_ksp3_port_a == 4)
+ e1000_ksp3_port_a = 0;
+
+ if (adapter->hw.mac_type >= e1000_82543) {
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
+ }
+
+#ifdef NETIF_F_TSO
+ if ((adapter->hw.mac_type >= e1000_82544) &&
+ (adapter->hw.mac_type != e1000_82547))
+ netdev->features |= NETIF_F_TSO;
+
+#ifdef NETIF_F_TSO_IPV6
+ if (adapter->hw.mac_type > e1000_82547_rev_2)
+ netdev->features |= NETIF_F_TSO_IPV6;
+#endif
+#endif
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->features |= NETIF_F_LLTX;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+
+ /* initialize eeprom parameters */
+
+ if (e1000_init_eeprom_params(&adapter->hw)) {
+ E1000_ERR("EEPROM initialization failed\n");
+ return -EIO;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(&adapter->hw);
+
+ /* make sure the EEPROM is good */
+
+ if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
+ /* On some hardware the first attemp fails */
+ if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
+ DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ } else
+ DPRINTK(PROBE, INFO, "The EEPROM Checksum failed in the first read, now OK\n");
+ }
+
+ /* copy the MAC address out of the EEPROM */
+
+ if (e1000_read_mac_addr(&adapter->hw))
+ DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ e1000_read_part_num(&adapter->hw, &(adapter->part_num));
+
+ e1000_get_bus_info(&adapter->hw);
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = &e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = &e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long) adapter;
+
+ INIT_WORK(&adapter->reset_task,
+ (void (*)(void *))e1000_reset_task, netdev);
+
+ /* we're going to reset, so assume we have no link for now */
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (adapter->hw.mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_ich8lan:
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82571:
+ case e1000_80003es2lan:
+ if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(&adapter->hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ /* print bus type/speed/width info */
+ {
+ struct e1000_hw *hw = &adapter->hw;
+ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
+ (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
+ ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
+ (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
+ (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
+ (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
+ (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
+ "32-bit"));
+ }
+
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (adapter->hw.mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(&adapter->hw))
+ e1000_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ if ((err = register_netdev(netdev)))
+ goto err_register;
+
+ DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+err_flashmap:
+err_sw_init:
+err_eeprom:
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit
+e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t manc;
+#ifdef CONFIG_E1000_NAPI
+ int i;
+#endif
+
+ flush_scheduled_work();
+
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
+ adapter->hw.media_type == e1000_media_type_copper) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ if (manc & E1000_MANC_SMBUS_EN) {
+ manc |= E1000_MANC_ARP_EN;
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+ }
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+#ifdef CONFIG_E1000_NAPI
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ dev_put(&adapter->polling_netdev[i]);
+#endif
+
+ if (!e1000_check_phy_reset_block(&adapter->hw))
+ e1000_phy_hw_reset(&adapter->hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+#ifdef CONFIG_E1000_NAPI
+ kfree(adapter->polling_netdev);
+#endif
+
+ iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit
+e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+#ifdef CONFIG_E1000_NAPI
+ int i;
+#endif
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
+ hw->max_frame_size = netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+
+ hw->wait_autoneg_complete = FALSE;
+ hw->tbi_compatibility_en = TRUE;
+ hw->adaptive_ifs = TRUE;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = FALSE;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+#ifdef CONFIG_E1000_NAPI
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ adapter->polling_netdev[i].priv = adapter;
+ adapter->polling_netdev[i].poll = &e1000_clean;
+ adapter->polling_netdev[i].weight = 64;
+ dev_hold(&adapter->polling_netdev[i]);
+ set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
+ }
+ spin_lock_init(&adapter->tx_queue_lock);
+#endif
+
+ atomic_set(&adapter->irq_sem, 1);
+ spin_lock_init(&adapter->stats_lock);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time. The polling_netdev array is
+ * intended for Multiqueue, but should work fine with a single queue.
+ **/
+
+static int __devinit
+e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ int size;
+
+ size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
+ adapter->tx_ring = kmalloc(size, GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+ memset(adapter->tx_ring, 0, size);
+
+ size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
+ adapter->rx_ring = kmalloc(size, GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+ memset(adapter->rx_ring, 0, size);
+
+#ifdef CONFIG_E1000_NAPI
+ size = sizeof(struct net_device) * adapter->num_rx_queues;
+ adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
+ if (!adapter->polling_netdev) {
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+ return -ENOMEM;
+ }
+ memset(adapter->polling_netdev, 0, size);
+#endif
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int
+e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ /* allocate transmit descriptors */
+
+ if ((err = e1000_setup_all_tx_resources(adapter)))
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+
+ if ((err = e1000_setup_all_rx_resources(adapter)))
+ goto err_setup_rx;
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_up;
+
+ e1000_power_up_phy(adapter);
+
+ if ((err = e1000_up(adapter)))
+ goto err_up;
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now open */
+ if (adapter->hw.mac_type == e1000_82573 &&
+ e1000_check_mng_mode(&adapter->hw))
+ e1000_get_hw_control(adapter);
+
+ return E1000_SUCCESS;
+
+err_up:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int
+e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ /* If AMT is enabled, let the firmware know that the network
+ * interface is now closed */
+ if (adapter->hw.mac_type == e1000_82573 &&
+ e1000_check_mng_mode(&adapter->hw))
+ e1000_release_hw_control(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static boolean_t
+e1000_check_64k_bound(struct e1000_adapter *adapter,
+ void *start, unsigned long len)
+{
+ unsigned long begin = (unsigned long) start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (adapter->hw.mac_type == e1000_82545 ||
+ adapter->hw.mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
+ }
+
+ return TRUE;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int
+e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vmalloc(size);
+ if (!txdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(txdr->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ E1000_ROUNDUP(txdr->size, 4096);
+
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
+ "at %p\n", txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, txdr->size, txdr->desc,
+ txdr->dma);
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, txdr->size, olddesc, olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+ spin_lock_init(&txdr->tx_lock);
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Tx Queue %u failed\n", i);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void
+e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ uint64_t tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t tdlen, tctl, tipg, tarc;
+ uint32_t ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ E1000_WRITE_REG(hw, TDLEN, tdlen);
+ E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+ E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDT, 0);
+ E1000_WRITE_REG(hw, TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes)
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ case e1000_80003es2lan:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ E1000_WRITE_REG(hw, TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = E1000_READ_REG(hw, TCTL);
+
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+#ifdef DISABLE_MULR
+ /* disable Multiple Reads for debugging */
+ tctl &= ~E1000_TCTL_MULR;
+#endif
+
+ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
+ tarc = E1000_READ_REG(hw, TARC0);
+ tarc |= ((1 << 25) | (1 << 21));
+ E1000_WRITE_REG(hw, TARC0, tarc);
+ tarc = E1000_READ_REG(hw, TARC1);
+ tarc |= (1 << 25);
+ if (tctl & E1000_TCTL_MULR)
+ tarc &= ~(1 << 28);
+ else
+ tarc |= (1 << 28);
+ E1000_WRITE_REG(hw, TARC1, tarc);
+ } else if (hw->mac_type == e1000_80003es2lan) {
+ tarc = E1000_READ_REG(hw, TARC0);
+ tarc |= 1;
+ if (hw->media_type == e1000_media_type_internal_serdes)
+ tarc |= (1 << 20);
+ E1000_WRITE_REG(hw, TARC0, tarc);
+ tarc = E1000_READ_REG(hw, TARC1);
+ tarc |= 1;
+ E1000_WRITE_REG(hw, TARC1, tarc);
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ E1000_WRITE_REG(hw, TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vmalloc(size);
+ if (!rxdr->buffer_info) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->buffer_info, 0, size);
+
+ size = sizeof(struct e1000_ps_page) * rxdr->count;
+ rxdr->ps_page = kmalloc(size, GFP_KERNEL);
+ if (!rxdr->ps_page) {
+ vfree(rxdr->buffer_info);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->ps_page, 0, size);
+
+ size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
+ rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
+ if (!rxdr->ps_page_dma) {
+ vfree(rxdr->buffer_info);
+ kfree(rxdr->ps_page);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->ps_page_dma, 0, size);
+
+ if (adapter->hw.mac_type <= e1000_82547_rev_2)
+ desc_len = sizeof(struct e1000_rx_desc);
+ else
+ desc_len = sizeof(union e1000_rx_desc_packet_split);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ E1000_ROUNDUP(rxdr->size, 4096);
+
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+
+ if (!rxdr->desc) {
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory for the receive descriptor ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ kfree(rxdr->ps_page);
+ kfree(rxdr->ps_page_dma);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
+ "at %p\n", rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ pci_free_consistent(pdev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate aligned memory "
+ "for the receive descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ DPRINTK(PROBE, ERR,
+ "Allocation for Rx Queue %u failed\n", i);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+static void
+e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ uint32_t rctl, rfctl;
+ uint32_t psrctl = 0;
+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
+ uint32_t pages = 0;
+#endif
+
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (adapter->hw.tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_256:
+ rctl |= E1000_RCTL_SZ_256;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_512:
+ rctl |= E1000_RCTL_SZ_512;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_1024:
+ rctl |= E1000_RCTL_SZ_1024;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
+ /* 82571 and greater support packet-split where the protocol
+ * header is placed in skb->data and the packet data is
+ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+ * In the case of a non-split, skb->data is linearly filled,
+ * followed by the page buffers. Therefore, skb->data is
+ * sized to hold the largest protocol header.
+ */
+ pages = PAGE_USE_COUNT(adapter->netdev->mtu);
+ if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) &&
+ PAGE_SIZE <= 16384)
+ adapter->rx_ps_pages = pages;
+ else
+ adapter->rx_ps_pages = 0;
+#endif
+ if (adapter->rx_ps_pages) {
+ /* Configure extra packet-split registers */
+ rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
+ rfctl |= E1000_RFCTL_EXTEN;
+ /* disable IPv6 packet split support */
+ rfctl |= E1000_RFCTL_IPV6_DIS;
+ E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
+
+ rctl |= E1000_RCTL_DTYP_PS;
+
+ psrctl |= adapter->rx_ps_bsize0 >>
+ E1000_PSRCTL_BSIZE0_SHIFT;
+
+ switch (adapter->rx_ps_pages) {
+ case 3:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE3_SHIFT;
+ case 2:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE2_SHIFT;
+ case 1:
+ psrctl |= PAGE_SIZE >>
+ E1000_PSRCTL_BSIZE1_SHIFT;
+ break;
+ }
+
+ E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
+ }
+
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void
+e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ uint64_t rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t rdlen, rctl, rxcsum, ctrl_ext;
+
+ if (adapter->rx_ps_pages) {
+ /* this is a 32 byte descriptor */
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(union e1000_rx_desc_packet_split);
+ adapter->clean_rx = e1000_clean_rx_irq_ps;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+ } else {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
+
+ /* disable receives while setting up the descriptors */
+ rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr > 1)
+ E1000_WRITE_REG(hw, ITR,
+ 1000000000 / (adapter->itr * 256));
+ }
+
+ if (hw->mac_type >= e1000_82571) {
+ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+ /* Reset delay timers after every interrupt */
+ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
+#ifdef CONFIG_E1000_NAPI
+ /* Auto-Mask interrupts upon ICR read. */
+ ctrl_ext |= E1000_CTRL_EXT_IAME;
+#endif
+ E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+ E1000_WRITE_REG(hw, IAM, ~0);
+ E1000_WRITE_FLUSH(hw);
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ E1000_WRITE_REG(hw, RDLEN, rdlen);
+ E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+ E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, RDT, 0);
+ E1000_WRITE_REG(hw, RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
+ if (adapter->rx_csum == TRUE) {
+ rxcsum |= E1000_RXCSUM_TUOFL;
+
+ /* Enable 82571 IPv4 payload checksum for UDP fragments
+ * Must be used in conjunction with packet-split. */
+ if ((hw->mac_type >= e1000_82571) &&
+ (adapter->rx_ps_pages)) {
+ rxcsum |= E1000_RXCSUM_IPPCSE;
+ }
+ } else {
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ }
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ E1000_WRITE_REG(hw, RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void
+e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void
+e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void
+e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ pci_unmap_page(adapter->pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ }
+ if (buffer_info->skb)
+ dev_kfree_skb_any(buffer_info->skb);
+ memset(buffer_info, 0, sizeof(struct e1000_buffer));
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void
+e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, adapter->hw.hw_addr + tx_ring->tdh);
+ writel(0, adapter->hw.hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void
+e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+ kfree(rx_ring->ps_page);
+ rx_ring->ps_page = NULL;
+ kfree(rx_ring->ps_page_dma);
+ rx_ring->ps_page_dma = NULL;
+
+ pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void
+e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void
+e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i, j;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->skb) {
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+ for (j = 0; j < adapter->rx_ps_pages; j++) {
+ if (!ps_page->ps_page[j]) break;
+ pci_unmap_page(pdev,
+ ps_page_dma->ps_page_dma[j],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ps_page_dma->ps_page_dma[j] = 0;
+ put_page(ps_page->ps_page[j]);
+ ps_page->ps_page[j] = NULL;
+ }
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+ size = sizeof(struct e1000_ps_page) * rx_ring->count;
+ memset(rx_ring->ps_page, 0, size);
+ size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
+ memset(rx_ring->ps_page_dma, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, adapter->hw.hw_addr + rx_ring->rdh);
+ writel(0, adapter->hw.hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void
+e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void
+e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ uint32_t rctl;
+
+ e1000_pci_clear_mwi(&adapter->hw);
+
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl |= E1000_RCTL_RST;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_FLUSH(&adapter->hw);
+ mdelay(5);
+
+ if (netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void
+e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ uint32_t rctl;
+
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ E1000_WRITE_FLUSH(&adapter->hw);
+ mdelay(5);
+
+ if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(&adapter->hw);
+
+ if (netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (adapter->hw.mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+
+ /* With 82571 controllers, LAA may be overwritten (with the default)
+ * due to controller reset from the other port. */
+ if (adapter->hw.mac_type == e1000_82571) {
+ /* activate the work around */
+ adapter->hw.laa_is_present = 1;
+
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
+ * of the RARs and no incoming packets directed to this port
+ * are dropped. Eventaully the LAA will be in RAR[0] and
+ * RAR[14] */
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
+ E1000_RAR_ENTRIES - 1);
+ }
+
+ if (adapter->hw.mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void
+e1000_set_multi(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct dev_mc_list *mc_ptr;
+ uint32_t rctl;
+ uint32_t hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+ E1000_NUM_MTA_REGISTERS_ICH8LAN :
+ E1000_NUM_MTA_REGISTERS;
+
+ if (adapter->hw.mac_type == e1000_ich8lan)
+ rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
+
+ /* reserve RAR[14] for LAA over-write work-around */
+ if (adapter->hw.mac_type == e1000_82571)
+ rar_entries--;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = E1000_READ_REG(hw, RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ } else if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ rctl &= ~E1000_RCTL_UPE;
+ } else {
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+ }
+
+ E1000_WRITE_REG(hw, RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 multicast address into the exact filters 1-14
+ * RAR 0 is used for the station MAC adddress
+ * if there are not 14 addresses, go ahead and clear the filters
+ * -- with 82571 controllers only 0-13 entries are filled here
+ */
+ mc_ptr = netdev->mc_list;
+
+ for (i = 1; i < rar_entries; i++) {
+ if (mc_ptr) {
+ e1000_rar_set(hw, mc_ptr->dmi_addr, i);
+ mc_ptr = mc_ptr->next;
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH(hw);
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH(hw);
+ }
+ }
+
+ /* clear the old settings from the multicast hash table */
+
+ for (i = 0; i < mta_reg_count; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ E1000_WRITE_FLUSH(hw);
+ }
+
+ /* load any remaining addresses into the hash table */
+
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
+ hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
+ e1000_mta_set(hw, hash_value);
+ }
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void
+e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+
+static void
+e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct net_device *netdev = adapter->netdev;
+ uint32_t tctl;
+
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((E1000_READ_REG(&adapter->hw, TDT) ==
+ E1000_READ_REG(&adapter->hw, TDH)) &&
+ (E1000_READ_REG(&adapter->hw, TDFT) ==
+ E1000_READ_REG(&adapter->hw, TDFH)) &&
+ (E1000_READ_REG(&adapter->hw, TDFTS) ==
+ E1000_READ_REG(&adapter->hw, TDFHS))) {
+ tctl = E1000_READ_REG(&adapter->hw, TCTL);
+ E1000_WRITE_REG(&adapter->hw, TCTL,
+ tctl & ~E1000_TCTL_EN);
+ E1000_WRITE_REG(&adapter->hw, TDFT,
+ adapter->tx_head_addr);
+ E1000_WRITE_REG(&adapter->hw, TDFH,
+ adapter->tx_head_addr);
+ E1000_WRITE_REG(&adapter->hw, TDFTS,
+ adapter->tx_head_addr);
+ E1000_WRITE_REG(&adapter->hw, TDFHS,
+ adapter->tx_head_addr);
+ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
+ E1000_WRITE_FLUSH(&adapter->hw);
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ netif_wake_queue(netdev);
+ } else {
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void
+e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ uint32_t link, tctl;
+ int32_t ret_val;
+
+ ret_val = e1000_check_for_link(&adapter->hw);
+ if ((ret_val == E1000_ERR_PHY) &&
+ (adapter->hw.phy_type == e1000_phy_igp_3) &&
+ (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kumeran_lock_loss_workaround() */
+ DPRINTK(LINK, INFO,
+ "Gigabit has been disabled, downgrading speed\n");
+ }
+ if (adapter->hw.mac_type == e1000_82573) {
+ e1000_enable_tx_pkt_filtering(&adapter->hw);
+ if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
+ e1000_update_mng_vlan(adapter);
+ }
+
+ if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
+ !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
+ link = !adapter->hw.serdes_link_down;
+ else
+ link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ boolean_t txb2b = 1;
+ e1000_get_speed_and_duplex(&adapter->hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex");
+
+ /* tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = 0;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 8;
+ break;
+ case SPEED_100:
+ txb2b = 0;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ if ((adapter->hw.mac_type == e1000_82571 ||
+ adapter->hw.mac_type == e1000_82572) &&
+ txb2b == 0) {
+#define SPEED_MODE_BIT (1 << 21)
+ uint32_t tarc0;
+ tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
+ tarc0 &= ~SPEED_MODE_BIT;
+ E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
+ }
+
+#ifdef NETIF_F_TSO
+ /* disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues */
+ if (!adapter->tso_force &&
+ adapter->hw.bus_type == e1000_bus_type_pci_express){
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ DPRINTK(PROBE,INFO,
+ "10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ break;
+ default:
+ /* oops */
+ break;
+ }
+ }
+#endif
+
+ /* enable transmits in the hardware, need to do this
+ * after setting TARC0 */
+ tctl = E1000_READ_REG(&adapter->hw, TCTL);
+ tctl |= E1000_TCTL_EN;
+ E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
+
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+ mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
+ adapter->smartspeed = 0;
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ DPRINTK(LINK, INFO, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
+
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives in the ISR and
+ * reset device here in the watchdog
+ */
+ if (adapter->hw.mac_type == e1000_80003es2lan) {
+ /* reset device */
+ schedule_work(&adapter->reset_task);
+ }
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+ e1000_update_stats(adapter);
+
+ adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(&adapter->hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ }
+ }
+
+ /* Dynamic mode for Interrupt Throttle Rate (ITR) */
+ if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
+ /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
+ * asymmetrical Tx or Rx gets ITR=8000; everyone
+ * else is between 2000-8000. */
+ uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
+ uint32_t dif = (adapter->gotcl > adapter->gorcl ?
+ adapter->gotcl - adapter->gorcl :
+ adapter->gorcl - adapter->gotcl) / 10000;
+ uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
+ E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = TRUE;
+
+ /* With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0] */
+ if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+
+ /* Reset the timer */
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int
+e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb)
+{
+#ifdef NETIF_F_TSO
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ uint32_t cmd_length = 0;
+ uint16_t ipcse = 0, tucse, mss;
+ uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ skb->nh.iph->tot_len = 0;
+ skb->nh.iph->check = 0;
+ skb->h.th->check =
+ ~csum_tcpudp_magic(skb->nh.iph->saddr,
+ skb->nh.iph->daddr,
+ 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb->h.raw - skb->data - 1;
+#ifdef NETIF_F_TSO_IPV6
+ } else if (skb->protocol == ntohs(ETH_P_IPV6)) {
+ skb->nh.ipv6h->payload_len = 0;
+ skb->h.th->check =
+ ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
+ &skb->nh.ipv6h->daddr,
+ 0,
+ IPPROTO_TCP,
+ 0);
+ ipcse = 0;
+#endif
+ }
+ ipcss = skb->nh.raw - skb->data;
+ ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
+ tucss = skb->h.raw - skb->data;
+ tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return TRUE;
+ }
+#endif
+
+ return FALSE;
+}
+
+static boolean_t
+e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ uint8_t css;
+
+ if (likely(skb->ip_summed == CHECKSUM_HW)) {
+ css = skb->h.raw - skb->data;
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
+
+ buffer_info->time_stamp = jiffies;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int
+e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
+ unsigned int nr_frags, unsigned int mss)
+{
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb->len;
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int f;
+ len -= skb->data_len;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+#ifdef NETIF_F_TSO
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+#endif
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma =
+ pci_map_single(adapter->pdev,
+ skb->data + offset,
+ size,
+ PCI_DMA_TODEVICE);
+ buffer_info->time_stamp = jiffies;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+#ifdef NETIF_F_TSO
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+#endif
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(frag->page+offset+size-1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->dma =
+ pci_map_page(adapter->pdev,
+ frag->page,
+ offset,
+ size,
+ PCI_DMA_TODEVICE);
+ buffer_info->time_stamp = jiffies;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+ }
+
+ i = (i == 0) ? tx_ring->count - 1 : i - 1;
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+}
+
+static void
+e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
+ int tx_flags, int count)
+{
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tdt);
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int
+e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
+{
+ uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static int
+e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ uint16_t length, offset;
+ if (vlan_tx_tag_present(skb)) {
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+ ( adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
+ return 0;
+ }
+ if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
+ struct ethhdr *eth = (struct ethhdr *) skb->data;
+ if ((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
+ (struct iphdr *)((uint8_t *)skb->data+14);
+ if (IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+ (struct udphdr *)((uint8_t *)ip +
+ (ip->ihl << 2));
+ if (ntohs(udp->dest) == 67) {
+ offset = (uint8_t *)udp + 8 - skb->data;
+ length = skb->len - offset;
+
+ return e1000_mng_write_dhcp_info(hw,
+ (uint8_t *)udp + 8,
+ length);
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static int
+e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb->len;
+ unsigned long flags;
+ unsigned int nr_frags = 0;
+ unsigned int mss = 0;
+ int count = 0;
+ int tso;
+ unsigned int f;
+ len -= skb->data_len;
+
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+#ifdef NETIF_F_TSO
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ uint8_t hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data */
+ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
+ if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
+ switch (adapter->hw.mac_type) {
+ unsigned int pull_size;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_ich8lan:
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ DPRINTK(DRV, ERR,
+ "__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb->len - skb->data_len;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_HW))
+ count++;
+ count++;
+#else
+ if (skb->ip_summed == CHECKSUM_HW)
+ count++;
+#endif
+
+#ifdef NETIF_F_TSO
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+#endif
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+
+ if (adapter->hw.tx_pkt_filtering &&
+ (adapter->hw.mac_type == e1000_82573))
+ e1000_transfer_dhcp_info(adapter, skb);
+
+ local_irq_save(flags);
+ if (!spin_trylock(&tx_ring->tx_lock)) {
+ /* Collision - tell upper layer to requeue */
+ local_irq_restore(flags);
+ return NETDEV_TX_LOCKED;
+ }
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) {
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (unlikely(adapter->hw.mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ netif_stop_queue(netdev);
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ /* Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must. */
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ e1000_tx_queue(adapter, tx_ring, tx_flags,
+ e1000_tx_map(adapter, tx_ring, skb, first,
+ max_per_txd, nr_frags, mss));
+
+ netdev->trans_start = jiffies;
+
+ /* Make sure there is space in the ring for the next send. */
+ if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2))
+ netif_stop_queue(netdev);
+
+ spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void
+e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void
+e1000_reset_task(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *
+e1000_get_stats(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ uint16_t eeprom_data = 0;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (adapter->hw.mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ case e1000_ich8lan:
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ case e1000_82573:
+ /* only enable jumbo frames if ASPM is disabled completely
+ * this means both bits must be zero in 0x1A bits 3:2 */
+ e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
+ &eeprom_data);
+ if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) {
+ if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ /* fall through to get support */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size
+ * i.e. RXBUFFER_2048 --> size-4096 slab */
+
+ if (max_frame <= E1000_RXBUFFER_256)
+ adapter->rx_buffer_len = E1000_RXBUFFER_256;
+ else if (max_frame <= E1000_RXBUFFER_512)
+ adapter->rx_buffer_len = E1000_RXBUFFER_512;
+ else if (max_frame <= E1000_RXBUFFER_1024)
+ adapter->rx_buffer_len = E1000_RXBUFFER_1024;
+ else if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if (max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if (max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if (max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!adapter->hw.tbi_compatibility_on &&
+ ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+
+ adapter->hw.max_frame_size = max_frame;
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void
+e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags;
+ uint16_t phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
+ return;
+
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_adjust_tbi_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
+ adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
+ adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
+ adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
+ adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
+ adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
+ adapter->stats.roc += E1000_READ_REG(hw, ROC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
+ adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
+ adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
+ adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
+ adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
+ adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+ }
+
+ adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
+ adapter->stats.mpc += E1000_READ_REG(hw, MPC);
+ adapter->stats.scc += E1000_READ_REG(hw, SCC);
+ adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
+ adapter->stats.mcc += E1000_READ_REG(hw, MCC);
+ adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
+ adapter->stats.dc += E1000_READ_REG(hw, DC);
+ adapter->stats.sec += E1000_READ_REG(hw, SEC);
+ adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
+ adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
+ adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
+ adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
+ adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
+ adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
+ adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
+ adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
+ adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
+ adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
+ adapter->stats.ruc += E1000_READ_REG(hw, RUC);
+ adapter->stats.rfc += E1000_READ_REG(hw, RFC);
+ adapter->stats.rjc += E1000_READ_REG(hw, RJC);
+ adapter->stats.torl += E1000_READ_REG(hw, TORL);
+ adapter->stats.torh += E1000_READ_REG(hw, TORH);
+ adapter->stats.totl += E1000_READ_REG(hw, TOTL);
+ adapter->stats.toth += E1000_READ_REG(hw, TOTH);
+ adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
+ adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
+ adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
+ adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
+ adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
+ adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+ }
+
+ adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
+ adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = E1000_READ_REG(hw, COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
+ adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
+ adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
+ adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
+ adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
+ adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
+ }
+ if (hw->mac_type > e1000_82547_rev_2) {
+ adapter->stats.iac += E1000_READ_REG(hw, IAC);
+ adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
+ adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
+ adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
+ adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
+ adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
+ adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
+ adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+ }
+ }
+
+ /* Fill out the OS statistics structure */
+
+ adapter->net_stats.rx_packets = adapter->stats.gprc;
+ adapter->net_stats.tx_packets = adapter->stats.gptc;
+ adapter->net_stats.rx_bytes = adapter->stats.gorcl;
+ adapter->net_stats.tx_bytes = adapter->stats.gotcl;
+ adapter->net_stats.multicast = adapter->stats.mprc;
+ adapter->net_stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+
+ adapter->net_stats.tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ * @pt_regs: CPU registers structure
+ **/
+
+static irqreturn_t
+e1000_intr(int irq, void *data, struct pt_regs *regs)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
+#ifndef CONFIG_E1000_NAPI
+ int i;
+#else
+ /* Interrupt Auto-Mask...upon reading ICR,
+ * interrupts are masked. No need for the
+ * IMC write, but it does mean we should
+ * account for it ASAP. */
+ if (likely(hw->mac_type >= e1000_82571))
+ atomic_inc(&adapter->irq_sem);
+#endif
+
+ if (unlikely(!icr)) {
+#ifdef CONFIG_E1000_NAPI
+ if (hw->mac_type >= e1000_82571)
+ e1000_irq_enable(adapter);
+#endif
+ return IRQ_NONE; /* Not our interrupt */
+ }
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (adapter->hw.mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ mod_timer(&adapter->watchdog_timer, jiffies);
+ }
+
+#ifdef CONFIG_E1000_NAPI
+ if (unlikely(hw->mac_type < e1000_82571)) {
+ atomic_inc(&adapter->irq_sem);
+ E1000_WRITE_REG(hw, IMC, ~0);
+ E1000_WRITE_FLUSH(hw);
+ }
+ if (likely(netif_rx_schedule_prep(netdev)))
+ __netif_rx_schedule(netdev);
+ else
+ e1000_irq_enable(adapter);
+#else
+ /* Writing IMC and IMS is needed for 82547.
+ * Due to Hub Link bus being occupied, an interrupt
+ * de-assertion message is not able to be sent.
+ * When an interrupt assertion message is generated later,
+ * two messages are re-ordered and sent out.
+ * That causes APIC to think 82547 is in de-assertion
+ * state, while 82547 is in assertion state, resulting
+ * in dead lock. Writing IMC forces 82547 into
+ * de-assertion state.
+ */
+ if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
+ atomic_inc(&adapter->irq_sem);
+ E1000_WRITE_REG(hw, IMC, ~0);
+ }
+
+ for (i = 0; i < E1000_MAX_INTR; i++)
+ if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ break;
+
+ if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
+ e1000_irq_enable(adapter);
+
+#endif
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_E1000_NAPI
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+
+static int
+e1000_clean(struct net_device *poll_dev, int *budget)
+{
+ struct e1000_adapter *adapter;
+ int work_to_do = min(*budget, poll_dev->quota);
+ int tx_cleaned = 0, work_done = 0;
+
+ /* Must NOT use netdev_priv macro here. */
+ adapter = poll_dev->priv;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(poll_dev))
+ goto quit_polling;
+
+ /* e1000_clean is called per-cpu. This lock protects
+ * tx_ring[0] from being cleaned by multiple cpus
+ * simultaneously. A failure obtaining the lock means
+ * tx_ring[0] is currently being cleaned anyway. */
+ if (spin_trylock(&adapter->tx_queue_lock)) {
+ tx_cleaned = e1000_clean_tx_irq(adapter,
+ &adapter->tx_ring[0]);
+ spin_unlock(&adapter->tx_queue_lock);
+ }
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0],
+ &work_done, work_to_do);
+
+ *budget -= work_done;
+ poll_dev->quota -= work_done;
+
+ /* If no Tx and not enough Rx work done, exit the polling mode */
+ if ((!tx_cleaned && (work_done == 0)) ||
+ !netif_running(poll_dev)) {
+quit_polling:
+ netif_rx_complete(poll_dev);
+ e1000_irq_enable(adapter);
+ return 0;
+ }
+
+ return 1;
+}
+
+#endif
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+
+static boolean_t
+e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+#ifdef CONFIG_E1000_NAPI
+ unsigned int count = 0;
+#endif
+ boolean_t cleaned = FALSE;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
+ for (cleaned = FALSE; !cleaned; ) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+#ifdef CONFIG_E1000_NAPI
+#define E1000_TX_WEIGHT 64
+ /* weight of a sort for tx, to avoid endless transmit cleanup */
+ if (count++ == E1000_TX_WEIGHT) break;
+#endif
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (unlikely(cleaned && netif_queue_stopped(netdev) &&
+ netif_carrier_ok(netdev))) {
+ spin_lock(&tx_ring->tx_lock);
+ if (netif_queue_stopped(netdev) &&
+ (E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))
+ netif_wake_queue(netdev);
+ spin_unlock(&tx_ring->tx_lock);
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = FALSE;
+ if (tx_ring->buffer_info[eop].dma &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
+ (adapter->tx_timeout_factor * HZ))
+ && !(E1000_READ_REG(&adapter->hw, STATUS) &
+ E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(adapter->hw.hw_addr + tx_ring->tdh),
+ readl(adapter->hw.hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ return cleaned;
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void
+e1000_rx_checksum(struct e1000_adapter *adapter,
+ uint32_t status_err, uint32_t csum,
+ struct sk_buff *skb)
+{
+ uint16_t status = (uint16_t)status_err;
+ uint8_t errors = (uint8_t)(status_err >> 24);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* 82543 or newer only */
+ if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (adapter->hw.mac_type <= e1000_82547_rev_2) {
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+ } else {
+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
+ /* IP fragment with UDP payload */
+ /* Hardware complements the payload checksum, so we undo it
+ * and then put the value in host order for further stack use.
+ */
+ csum = ntohl(csum ^ 0xFFFF);
+ skb->csum = csum;
+ skb->ip_summed = CHECKSUM_HW;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ **/
+
+static boolean_t
+#ifdef CONFIG_E1000_NAPI
+e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+#else
+e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+#endif
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ uint32_t length;
+ uint8_t last_byte;
+ unsigned int i;
+ int cleaned_count = 0;
+ boolean_t cleaned = FALSE;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+#ifdef CONFIG_E1000_NAPI
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+#endif
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = TRUE;
+ cleaned_count++;
+ pci_unmap_single(pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* adjust length to remove Ethernet CRC */
+ length -= 4;
+
+ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ /* recycle */
+ buffer_info-> skb = skb;
+ goto next_desc;
+ }
+
+ if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(&adapter->hw, status,
+ rx_desc->errors, length, last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(&adapter->hw,
+ &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack */
+#define E1000_CB_LENGTH 256
+ if (length < E1000_CB_LENGTH) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+ if (new_skb) {
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ new_skb->dev = netdev;
+ memcpy(new_skb->data - NET_IP_ALIGN,
+ skb->data - NET_IP_ALIGN,
+ length + NET_IP_ALIGN);
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ skb_put(skb, length);
+ }
+ } else
+ skb_put(skb, length);
+
+ /* end copybreak code */
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (uint32_t)(status) |
+ ((uint32_t)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+#ifdef CONFIG_E1000_NAPI
+ if (unlikely(adapter->vlgrp &&
+ (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->special) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_receive_skb(skb);
+ }
+#else /* CONFIG_E1000_NAPI */
+ if (unlikely(adapter->vlgrp &&
+ (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_rx(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->special) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_rx(skb);
+ }
+#endif /* CONFIG_E1000_NAPI */
+ netdev->last_rx = jiffies;
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ return cleaned;
+}
+
+/**
+ * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
+ * @adapter: board private structure
+ **/
+
+static boolean_t
+#ifdef CONFIG_E1000_NAPI
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+#else
+e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+#endif
+{
+ union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
+ struct sk_buff *skb;
+ unsigned int i, j;
+ uint32_t length, staterr;
+ int cleaned_count = 0;
+ boolean_t cleaned = FALSE;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+#ifdef CONFIG_E1000_NAPI
+ if (unlikely(*work_done >= work_to_do))
+ break;
+ (*work_done)++;
+#endif
+ skb = buffer_info->skb;
+
+ /* in the packet split case this is header only */
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = TRUE;
+ cleaned_count++;
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+
+ if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
+ E1000_DBG("%s: Packet Split buffers didn't pick up"
+ " the full packet\n", netdev->name);
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+ if (unlikely(!length)) {
+ E1000_DBG("%s: Last part of the packet spanning"
+ " multiple descriptors\n", netdev->name);
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ /* Good Receive */
+ skb_put(skb, length);
+
+ {
+ /* this looks ugly, but it seems compiler issues make it
+ more efficient than reusing j */
+ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
+
+ /* page alloc/put takes too long and effects small packet
+ * throughput, so unsplit small packets and save the alloc/put*/
+ if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
+ u8 *vaddr;
+ /* there is no documentation about how to call
+ * kmap_atomic, so we can't hold the mapping
+ * very long */
+ pci_dma_sync_single_for_cpu(pdev,
+ ps_page_dma->ps_page_dma[0],
+ PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ vaddr = kmap_atomic(ps_page->ps_page[0],
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb->tail, vaddr, l1);
+ kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
+ pci_dma_sync_single_for_device(pdev,
+ ps_page_dma->ps_page_dma[0],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ /* remove the CRC */
+ l1 -= 4;
+ skb_put(skb, l1);
+ goto copydone;
+ } /* if */
+ }
+
+ for (j = 0; j < adapter->rx_ps_pages; j++) {
+ if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
+ break;
+ pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ps_page_dma->ps_page_dma[j] = 0;
+ skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
+ length);
+ ps_page->ps_page[j] = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ }
+
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive */
+ pskb_trim(skb, skb->len - 4);
+
+copydone:
+ e1000_rx_checksum(adapter, staterr,
+ le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ if (likely(rx_desc->wb.upper.header_status &
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
+ adapter->rx_hdr_split++;
+#ifdef CONFIG_E1000_NAPI
+ if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->wb.middle.vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_receive_skb(skb);
+ }
+#else /* CONFIG_E1000_NAPI */
+ if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_rx(skb, adapter->vlgrp,
+ le16_to_cpu(rx_desc->wb.middle.vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_rx(skb);
+ }
+#endif /* CONFIG_E1000_NAPI */
+ netdev->last_rx = jiffies;
+
+next_desc:
+ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
+ buffer_info->skb = NULL;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void
+e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ if (!(skb = buffer_info->skb))
+ skb = netdev_alloc_skb(netdev, bufsz);
+ else {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while !buffer_info->skb */
+ } else {
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ }
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ skb->dev = netdev;
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = pci_map_single(pdev,
+ skb->data,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ DPRINTK(RX_ERR, ERR,
+ "dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+
+static void
+e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_rx_desc_packet_split *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct e1000_ps_page_dma *ps_page_dma;
+ struct sk_buff *skb;
+ unsigned int i, j;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+
+ while (cleaned_count--) {
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+ if (j < adapter->rx_ps_pages) {
+ if (likely(!ps_page->ps_page[j])) {
+ ps_page->ps_page[j] =
+ alloc_page(GFP_ATOMIC);
+ if (unlikely(!ps_page->ps_page[j])) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ ps_page_dma->ps_page_dma[j] =
+ pci_map_page(pdev,
+ ps_page->ps_page[j],
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't
+ * change because each write-back erases
+ * this info.
+ */
+ rx_desc->read.buffer_addr[j+1] =
+ cpu_to_le64(ps_page_dma->ps_page_dma[j]);
+ } else
+ rx_desc->read.buffer_addr[j+1] = ~0;
+ }
+
+ skb = netdev_alloc_skb(netdev,
+ adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+
+ if (unlikely(!skb)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ skb->dev = netdev;
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_ps_bsize0;
+ buffer_info->dma = pci_map_single(pdev, skb->data,
+ adapter->rx_ps_bsize0,
+ PCI_DMA_FROMDEVICE);
+
+ rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count)) i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ ps_page = &rx_ring->ps_page[i];
+ ps_page_dma = &rx_ring->ps_page_dma[i];
+ }
+
+no_buffers:
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ /* Hardware increments by 16 bytes, but packet split
+ * descriptors are 32 bytes...so we increment tail
+ * twice as much.
+ */
+ writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void
+e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ uint16_t phy_status;
+ uint16_t phy_ctrl;
+
+ if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
+ !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(&adapter->hw) &&
+ !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(&adapter->hw) &&
+ !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int
+e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int
+e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ uint16_t mii_reg;
+ uint16_t spddplx;
+ unsigned long flags;
+
+ if (adapter->hw.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy_addr;
+ break;
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ if (adapter->hw.media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ adapter->hw.autoneg = 1;
+ adapter->hw.autoneg_advertised = 0x2F;
+ } else {
+ if (mii_reg & 0x40)
+ spddplx = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ spddplx = SPEED_100;
+ else
+ spddplx = SPEED_10;
+ spddplx += (mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF;
+ retval = e1000_set_spd_dplx(adapter,
+ spddplx);
+ if (retval) {
+ spin_unlock_irqrestore(
+ &adapter->stats_lock,
+ flags);
+ return retval;
+ }
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(&adapter->hw)) {
+ spin_unlock_irqrestore(
+ &adapter->stats_lock, flags);
+ return -EIO;
+ }
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void
+e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+}
+
+void
+e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+void
+e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void
+e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+#if 0
+uint32_t
+e1000_io_read(struct e1000_hw *hw, unsigned long port)
+{
+ return inl(port);
+}
+#endif /* 0 */
+
+void
+e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
+{
+ outl(value, port);
+}
+
+static void
+e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t ctrl, rctl;
+
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ ctrl |= E1000_CTRL_VME;
+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ /* enable VLAN receive filtering */
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ }
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+
+ if (adapter->hw.mac_type != e1000_ich8lan) {
+ /* disable VLAN filtering */
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+ }
+
+ e1000_irq_enable(adapter);
+}
+
+static void
+e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t vfta, index;
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(&adapter->hw, index, vfta);
+}
+
+static void
+e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t vfta, index;
+
+ e1000_irq_disable(adapter);
+
+ if (adapter->vlgrp)
+ adapter->vlgrp->vlan_devices[vid] = NULL;
+
+ e1000_irq_enable(adapter);
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id)) {
+ /* release control to f/w */
+ e1000_release_hw_control(adapter);
+ return;
+ }
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(&adapter->hw, index, vfta);
+}
+
+static void
+e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (adapter->vlgrp) {
+ uint16_t vid;
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!adapter->vlgrp->vlan_devices[vid])
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+ }
+}
+
+int
+e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
+{
+ adapter->hw.autoneg = 0;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((adapter->hw.media_type == e1000_media_type_fiber) &&
+ spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+
+ switch (spddplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ adapter->hw.autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+/* Save/restore 16 or 64 dwords of PCI config space depending on which
+ * bus we're on (PCI(X) vs. PCI-E)
+ */
+#define PCIE_CONFIG_SPACE_LEN 256
+#define PCI_CONFIG_SPACE_LEN 64
+static int
+e1000_pci_save_state(struct e1000_adapter *adapter)
+{
+ struct pci_dev *dev = adapter->pdev;
+ int size;
+ int i;
+
+ if (adapter->hw.mac_type >= e1000_82571)
+ size = PCIE_CONFIG_SPACE_LEN;
+ else
+ size = PCI_CONFIG_SPACE_LEN;
+
+ WARN_ON(adapter->config_space != NULL);
+
+ adapter->config_space = kmalloc(size, GFP_KERNEL);
+ if (!adapter->config_space) {
+ DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
+ return -ENOMEM;
+ }
+ for (i = 0; i < (size / 4); i++)
+ pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
+ return 0;
+}
+
+static void
+e1000_pci_restore_state(struct e1000_adapter *adapter)
+{
+ struct pci_dev *dev = adapter->pdev;
+ int size;
+ int i;
+
+ if (adapter->config_space == NULL)
+ return;
+
+ if (adapter->hw.mac_type >= e1000_82571)
+ size = PCIE_CONFIG_SPACE_LEN;
+ else
+ size = PCI_CONFIG_SPACE_LEN;
+ for (i = 0; i < (size / 4); i++)
+ pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
+ kfree(adapter->config_space);
+ adapter->config_space = NULL;
+ return;
+}
+#endif /* CONFIG_PM */
+
+static int
+e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t ctrl, ctrl_ext, rctl, manc, status;
+ uint32_t wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ /* Implement our own version of pci_save_state(pdev) because pci-
+ * express adapters have 256-byte config spaces. */
+ retval = e1000_pci_save_state(adapter);
+ if (retval)
+ return retval;
+#endif
+
+ status = E1000_READ_REG(&adapter->hw, STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_multi(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (adapter->wol & E1000_WUFC_MC) {
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl |= E1000_RCTL_MPE;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ }
+
+ if (adapter->hw.mac_type >= e1000_82540) {
+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+ }
+
+ if (adapter->hw.media_type == e1000_media_type_fiber ||
+ adapter->hw.media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
+ }
+
+ /* Allow time for pending master requests to run */
+ e1000_disable_pciex_master(&adapter->hw);
+
+ E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
+ E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
+ } else {
+ E1000_WRITE_REG(&adapter->hw, WUC, 0);
+ E1000_WRITE_REG(&adapter->hw, WUFC, 0);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+ }
+
+ /* FIXME: this code is incorrect for PCI Express */
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
+ adapter->hw.media_type == e1000_media_type_copper) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ if (manc & E1000_MANC_SMBUS_EN) {
+ manc |= E1000_MANC_ARP_EN;
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_enable_wake(pdev, PCI_D3cold, 1);
+ }
+ }
+
+ if (adapter->hw.phy_type == e1000_phy_igp_3)
+ e1000_phy_powerdown_workaround(&adapter->hw);
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ e1000_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ uint32_t manc, ret_val;
+
+ pci_set_power_state(pdev, PCI_D0);
+ e1000_pci_restore_state(adapter);
+ ret_val = pci_enable_device(pdev);
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev) && (ret_val = e1000_request_irq(adapter)))
+ return ret_val;
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ netif_device_attach(netdev);
+
+ /* FIXME: this code is incorrect for PCI Express */
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type != e1000_ich8lan &&
+ adapter->hw.media_type == e1000_media_type_copper) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+
+ /* If the controller is 82573 and f/w is AMT, do not set
+ * DRV_LOAD until the interface is up. For all other cases,
+ * let the f/w know that the h/w is now under the control
+ * of the driver. */
+ if (adapter->hw.mac_type != e1000_82573 ||
+ !e1000_check_mng_mode(&adapter->hw))
+ e1000_get_hw_control(adapter);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void
+e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev, NULL);
+ e1000_clean_tx_irq(adapter, adapter->tx_ring);
+#ifndef CONFIG_E1000_NAPI
+ adapter->clean_rx(adapter, adapter->rx_ring);
+#endif
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev->priv;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev->priv;
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, 3, 0);
+ pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
+
+ /* Perform card reset only on one instance of the card */
+ if (PCI_FUNC (pdev->devfn) != 0)
+ return PCI_ERS_RESULT_RECOVERED;
+
+ e1000_reset(adapter);
+ E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev->priv;
+ uint32_t manc, swsm;
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ printk("e1000: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
+ manc = E1000_READ_REG(&adapter->hw, MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ E1000_WRITE_REG(&adapter->hw, MANC, manc);
+ }
+
+ switch (adapter->hw.mac_type) {
+ case e1000_82573:
+ swsm = E1000_READ_REG(&adapter->hw, SWSM);
+ E1000_WRITE_REG(&adapter->hw, SWSM,
+ swsm | E1000_SWSM_DRV_LOAD);
+ break;
+ default:
+ break;
+ }
+
+ if (netif_running(netdev))
+ mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
+/* e1000_main.c */