--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/devices/ccat/module.h Fri Apr 25 16:42:36 2014 +0200
@@ -0,0 +1,208 @@
+/**
+ Network Driver for Beckhoff CCAT communication controller
+ Copyright (C) 2014 Beckhoff Automation GmbH
+ Author: Patrick Bruenn <p.bruenn@beckhoff.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef _CCAT_H_
+#define _CCAT_H_
+
+#include <linux/cdev.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include "CCatDefinitions.h"
+#include "../ecdev.h"
+
+#define DRV_NAME "ec_ccat"
+#define DRV_EXTRAVERSION "-ec"
+#define DRV_VERSION "0.8" DRV_EXTRAVERSION
+#define DRV_DESCRIPTION "Beckhoff CCAT Ethernet/EtherCAT Network Driver"
+
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/**
+ * struct ccat_bar - CCAT PCI Base Address Register(BAR) configuration
+ * @start: start address of this BAR
+ * @end: end address of this BAR
+ * @len: length of this BAR
+ * @flags: flags set on this BAR
+ * @ioaddr: ioremapped address of this bar
+ */
+struct ccat_bar {
+ unsigned long start;
+ unsigned long end;
+ unsigned long len;
+ unsigned long flags;
+ void __iomem *ioaddr;
+};
+
+/**
+ * struct ccat_dma - CCAT DMA channel configuration
+ * @phys: device-viewed address(physical) of the associated DMA memory
+ * @virt: CPU-viewed address(virtual) of the associated DMA memory
+ * @size: number of bytes in the associated DMA memory
+ * @channel: CCAT DMA channel number
+ * @dev: valid struct device pointer
+ */
+struct ccat_dma {
+ dma_addr_t phys;
+ void *virt;
+ size_t size;
+ size_t channel;
+ struct device *dev;
+};
+
+extern void ccat_dma_free(struct ccat_dma *const dma);
+extern int ccat_dma_init(struct ccat_dma *const dma, size_t channel,
+ void __iomem * const ioaddr, struct device *const dev);
+
+/**
+ * struct ccat_eth_frame - Ethernet frame with DMA descriptor header in front
+ * @reservedn: is not used and should always be set to 0
+ * @received: used for reception, is set to 1 by the CCAT when data was written
+ * @length: number of bytes in the frame including the DMA header
+ * @sent: is set to 1 by the CCAT when data was transmitted
+ * @timestamp: a 64 bit EtherCAT timestamp
+ * @data: the bytes of the ethernet frame
+ */
+struct ccat_eth_frame {
+ uint32_t reserved1;
+ uint32_t received:1;
+ uint32_t reserved2:31;
+ uint16_t length;
+ uint16_t reserved3;
+ uint32_t sent:1;
+ uint32_t reserved4:31;
+ uint64_t timestamp;
+ uint8_t data[0x800 - 3 * sizeof(uint64_t)];
+};
+
+/**
+ * struct ccat_eth_register - CCAT register addresses in the PCI BAR
+ * @mii: address of the CCAT management interface register
+ * @tx_fifo: address of the CCAT TX DMA fifo register
+ * @rx_fifo: address of the CCAT RX DMA fifo register
+ * @mac: address of the CCAT media access control register
+ * @rx_mem: address of the CCAT register holding the RX DMA address
+ * @tx_mem: address of the CCAT register holding the TX DMA address
+ * @misc: address of a CCAT register holding miscellaneous information
+ */
+struct ccat_eth_register {
+ void __iomem *mii;
+ void __iomem *tx_fifo;
+ void __iomem *rx_fifo;
+ void __iomem *mac;
+ void __iomem *rx_mem;
+ void __iomem *tx_mem;
+ void __iomem *misc;
+};
+
+/**
+ * struct ccat_eth_dma_fifo - CCAT RX or TX DMA fifo
+ * @add: callback used to add a frame to this fifo
+ * @reg: PCI register address of this DMA fifo
+ * @dma: information about the associated DMA memory
+ */
+struct ccat_eth_dma_fifo {
+ void (*add) (struct ccat_eth_frame *, struct ccat_eth_dma_fifo *);
+ void __iomem *reg;
+ struct ccat_dma dma;
+};
+
+/**
+ * struct ccat_device - CCAT device representation
+ * @pdev: pointer to the pci object allocated by the kernel
+ * @ethdev: CCAT Ethernet/EtherCAT Master (with DMA) function, NULL if function is not available or failed to initialize
+ * @update: CCAT Update function, NULL if function is not available or failed to initialize
+ * @bar [0] and [2] holding information about PCI BARs 0 and 2.
+ *
+ * One instance of a ccat_device should represent a physical CCAT. Since
+ * a CCAT is implemented as FPGA the available functions can vary so
+ * the function object pointers can be NULL.
+ * Extra note: you will recognize that PCI BAR1 is not used and is a
+ * waste of memory, thats true but right now, its very easy to use it
+ * this way. So we might optimize it later.
+ */
+struct ccat_device {
+ struct pci_dev *pdev;
+ struct ccat_eth_priv *ethdev;
+ struct ccat_update *update;
+ struct ccat_bar bar[3]; //TODO optimize this
+};
+
+/**
+ * struct ccat_eth_priv - CCAT Ethernet/EtherCAT Master function (netdev)
+ * @ccatdev: pointer to the parent struct ccat_device
+ * @netdev: the net_device structure used by the kernel networking stack
+ * @poll_thread: is used to poll status registers like link state
+ * @rx_thread: thread which does housekeeping of RX DMA descriptors
+ * @tx_thread: thread which does housekeeping of TX DMA descriptors
+ * @next_tx_frame: pointer to the next TX DMA descriptor, which the tx_thread should check for availablity
+ * @info: holds a copy of the CCAT Ethernet/EtherCAT Master function information block (read from PCI config space)
+ * @reg: register addresses in PCI config space of the Ethernet/EtherCAT Master function
+ * @rx_fifo: DMA fifo used for RX DMA descriptors
+ * @tx_fifo: DMA fifo used for TX DMA descriptors
+ * @rx_bytes: number of bytes received -> reported with ndo_get_stats64()
+ * @rx_dropped: number of received frames, which were dropped -> reported with ndo_get_stats64()
+ * @tx_bytes: number of bytes send -> reported with ndo_get_stats64()
+ * @tx_dropped: number of frames requested to send, which were dropped -> reported with ndo_get_stats64()
+ */
+struct ccat_eth_priv {
+ const struct ccat_device *ccatdev;
+ struct net_device *netdev;
+ struct task_struct *poll_thread;
+ struct task_struct *rx_thread;
+ struct task_struct *tx_thread;
+ const struct ccat_eth_frame *next_tx_frame; /* next frame the tx_thread should check for availability */
+ CCatInfoBlock info;
+ struct ccat_eth_register reg;
+ struct ccat_eth_dma_fifo rx_fifo;
+ struct ccat_eth_dma_fifo tx_fifo;
+ atomic64_t rx_bytes;
+ atomic64_t rx_dropped;
+ atomic64_t tx_bytes;
+ atomic64_t tx_dropped;
+ ec_device_t *ecdev;
+ void (*carrier_off) (struct net_device * const netdev);
+ void (*carrier_on) (struct net_device * const netdev);
+ void (*kfree_skb_any) (struct sk_buff * skb);
+ void (*start_queue) (struct net_device * const netdev);
+ void (*stop_queue) (struct net_device * const netdev);
+ void (*tx_fifo_full) (struct net_device * const dev,
+ const struct ccat_eth_frame * const frame);
+ void (*unregister) (struct net_device * const netdev);
+};
+
+/**
+ * struct ccat_update - CCAT Update function (update)
+ * @ccatdev: pointer to the parent struct ccat_device
+ * @ioaddr: PCI base address of the CCAT Update function
+ * dev: device number for this update function
+ * cdev: character device used for the CCAT Update function
+ * class: pointer to a device class used when registering the CCAT Update device
+ * @info: holds a copy of the CCAT Update function information block (read from PCI config space)
+ */
+struct ccat_update {
+ struct kref refcount;
+ void __iomem *ioaddr;
+ dev_t dev;
+ struct cdev cdev;
+ struct class *class;
+ CCatInfoBlock info;
+};
+#endif /* #ifndef _CCAT_H_ */