|
1 /******************************************************************************* |
|
2 |
|
3 Intel PRO/1000 Linux driver |
|
4 Copyright(c) 1999 - 2006 Intel Corporation. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms and conditions of the GNU General Public License, |
|
8 version 2, as published by the Free Software Foundation. |
|
9 |
|
10 This program is distributed in the hope it will be useful, but WITHOUT |
|
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
13 more details. |
|
14 |
|
15 You should have received a copy of the GNU General Public License along with |
|
16 this program; if not, write to the Free Software Foundation, Inc., |
|
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
|
18 |
|
19 The full GNU General Public License is included in this distribution in |
|
20 the file called "COPYING". |
|
21 |
|
22 Contact Information: |
|
23 Linux NICS <linux.nics@intel.com> |
|
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
26 |
|
27 *******************************************************************************/ |
|
28 |
|
29 /* ethtool support for e1000 */ |
|
30 |
|
31 #include "e1000-3.4-ethercat.h" |
|
32 #include <asm/uaccess.h> |
|
33 |
|
34 enum {NETDEV_STATS, E1000_STATS}; |
|
35 |
|
36 struct e1000_stats { |
|
37 char stat_string[ETH_GSTRING_LEN]; |
|
38 int type; |
|
39 int sizeof_stat; |
|
40 int stat_offset; |
|
41 }; |
|
42 |
|
43 #define E1000_STAT(m) E1000_STATS, \ |
|
44 sizeof(((struct e1000_adapter *)0)->m), \ |
|
45 offsetof(struct e1000_adapter, m) |
|
46 #define E1000_NETDEV_STAT(m) NETDEV_STATS, \ |
|
47 sizeof(((struct net_device *)0)->m), \ |
|
48 offsetof(struct net_device, m) |
|
49 |
|
50 static const struct e1000_stats e1000_gstrings_stats[] = { |
|
51 { "rx_packets", E1000_STAT(stats.gprc) }, |
|
52 { "tx_packets", E1000_STAT(stats.gptc) }, |
|
53 { "rx_bytes", E1000_STAT(stats.gorcl) }, |
|
54 { "tx_bytes", E1000_STAT(stats.gotcl) }, |
|
55 { "rx_broadcast", E1000_STAT(stats.bprc) }, |
|
56 { "tx_broadcast", E1000_STAT(stats.bptc) }, |
|
57 { "rx_multicast", E1000_STAT(stats.mprc) }, |
|
58 { "tx_multicast", E1000_STAT(stats.mptc) }, |
|
59 { "rx_errors", E1000_STAT(stats.rxerrc) }, |
|
60 { "tx_errors", E1000_STAT(stats.txerrc) }, |
|
61 { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) }, |
|
62 { "multicast", E1000_STAT(stats.mprc) }, |
|
63 { "collisions", E1000_STAT(stats.colc) }, |
|
64 { "rx_length_errors", E1000_STAT(stats.rlerrc) }, |
|
65 { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) }, |
|
66 { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, |
|
67 { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) }, |
|
68 { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, |
|
69 { "rx_missed_errors", E1000_STAT(stats.mpc) }, |
|
70 { "tx_aborted_errors", E1000_STAT(stats.ecol) }, |
|
71 { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, |
|
72 { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) }, |
|
73 { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) }, |
|
74 { "tx_window_errors", E1000_STAT(stats.latecol) }, |
|
75 { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, |
|
76 { "tx_deferred_ok", E1000_STAT(stats.dc) }, |
|
77 { "tx_single_coll_ok", E1000_STAT(stats.scc) }, |
|
78 { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, |
|
79 { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, |
|
80 { "tx_restart_queue", E1000_STAT(restart_queue) }, |
|
81 { "rx_long_length_errors", E1000_STAT(stats.roc) }, |
|
82 { "rx_short_length_errors", E1000_STAT(stats.ruc) }, |
|
83 { "rx_align_errors", E1000_STAT(stats.algnerrc) }, |
|
84 { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) }, |
|
85 { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) }, |
|
86 { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) }, |
|
87 { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) }, |
|
88 { "tx_flow_control_xon", E1000_STAT(stats.xontxc) }, |
|
89 { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, |
|
90 { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, |
|
91 { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, |
|
92 { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, |
|
93 { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, |
|
94 { "tx_smbus", E1000_STAT(stats.mgptc) }, |
|
95 { "rx_smbus", E1000_STAT(stats.mgprc) }, |
|
96 { "dropped_smbus", E1000_STAT(stats.mgpdc) }, |
|
97 }; |
|
98 |
|
99 #define E1000_QUEUE_STATS_LEN 0 |
|
100 #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) |
|
101 #define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN) |
|
102 static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { |
|
103 "Register test (offline)", "Eeprom test (offline)", |
|
104 "Interrupt test (offline)", "Loopback test (offline)", |
|
105 "Link test (on/offline)" |
|
106 }; |
|
107 #define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test) |
|
108 |
|
109 static int e1000_get_settings(struct net_device *netdev, |
|
110 struct ethtool_cmd *ecmd) |
|
111 { |
|
112 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
113 struct e1000_hw *hw = &adapter->hw; |
|
114 |
|
115 if (hw->media_type == e1000_media_type_copper) { |
|
116 |
|
117 ecmd->supported = (SUPPORTED_10baseT_Half | |
|
118 SUPPORTED_10baseT_Full | |
|
119 SUPPORTED_100baseT_Half | |
|
120 SUPPORTED_100baseT_Full | |
|
121 SUPPORTED_1000baseT_Full| |
|
122 SUPPORTED_Autoneg | |
|
123 SUPPORTED_TP); |
|
124 ecmd->advertising = ADVERTISED_TP; |
|
125 |
|
126 if (hw->autoneg == 1) { |
|
127 ecmd->advertising |= ADVERTISED_Autoneg; |
|
128 /* the e1000 autoneg seems to match ethtool nicely */ |
|
129 ecmd->advertising |= hw->autoneg_advertised; |
|
130 } |
|
131 |
|
132 ecmd->port = PORT_TP; |
|
133 ecmd->phy_address = hw->phy_addr; |
|
134 |
|
135 if (hw->mac_type == e1000_82543) |
|
136 ecmd->transceiver = XCVR_EXTERNAL; |
|
137 else |
|
138 ecmd->transceiver = XCVR_INTERNAL; |
|
139 |
|
140 } else { |
|
141 ecmd->supported = (SUPPORTED_1000baseT_Full | |
|
142 SUPPORTED_FIBRE | |
|
143 SUPPORTED_Autoneg); |
|
144 |
|
145 ecmd->advertising = (ADVERTISED_1000baseT_Full | |
|
146 ADVERTISED_FIBRE | |
|
147 ADVERTISED_Autoneg); |
|
148 |
|
149 ecmd->port = PORT_FIBRE; |
|
150 |
|
151 if (hw->mac_type >= e1000_82545) |
|
152 ecmd->transceiver = XCVR_INTERNAL; |
|
153 else |
|
154 ecmd->transceiver = XCVR_EXTERNAL; |
|
155 } |
|
156 |
|
157 if (er32(STATUS) & E1000_STATUS_LU) { |
|
158 |
|
159 e1000_get_speed_and_duplex(hw, &adapter->link_speed, |
|
160 &adapter->link_duplex); |
|
161 ethtool_cmd_speed_set(ecmd, adapter->link_speed); |
|
162 |
|
163 /* unfortunately FULL_DUPLEX != DUPLEX_FULL |
|
164 * and HALF_DUPLEX != DUPLEX_HALF */ |
|
165 |
|
166 if (adapter->link_duplex == FULL_DUPLEX) |
|
167 ecmd->duplex = DUPLEX_FULL; |
|
168 else |
|
169 ecmd->duplex = DUPLEX_HALF; |
|
170 } else { |
|
171 ethtool_cmd_speed_set(ecmd, -1); |
|
172 ecmd->duplex = -1; |
|
173 } |
|
174 |
|
175 ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) || |
|
176 hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; |
|
177 return 0; |
|
178 } |
|
179 |
|
180 static int e1000_set_settings(struct net_device *netdev, |
|
181 struct ethtool_cmd *ecmd) |
|
182 { |
|
183 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
184 struct e1000_hw *hw = &adapter->hw; |
|
185 |
|
186 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) |
|
187 msleep(1); |
|
188 |
|
189 if (ecmd->autoneg == AUTONEG_ENABLE) { |
|
190 hw->autoneg = 1; |
|
191 if (hw->media_type == e1000_media_type_fiber) |
|
192 hw->autoneg_advertised = ADVERTISED_1000baseT_Full | |
|
193 ADVERTISED_FIBRE | |
|
194 ADVERTISED_Autoneg; |
|
195 else |
|
196 hw->autoneg_advertised = ecmd->advertising | |
|
197 ADVERTISED_TP | |
|
198 ADVERTISED_Autoneg; |
|
199 ecmd->advertising = hw->autoneg_advertised; |
|
200 } else { |
|
201 u32 speed = ethtool_cmd_speed(ecmd); |
|
202 if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { |
|
203 clear_bit(__E1000_RESETTING, &adapter->flags); |
|
204 return -EINVAL; |
|
205 } |
|
206 } |
|
207 |
|
208 /* reset the link */ |
|
209 |
|
210 if (netif_running(adapter->netdev)) { |
|
211 e1000_down(adapter); |
|
212 e1000_up(adapter); |
|
213 } else |
|
214 e1000_reset(adapter); |
|
215 |
|
216 clear_bit(__E1000_RESETTING, &adapter->flags); |
|
217 return 0; |
|
218 } |
|
219 |
|
220 static u32 e1000_get_link(struct net_device *netdev) |
|
221 { |
|
222 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
223 |
|
224 /* |
|
225 * If the link is not reported up to netdev, interrupts are disabled, |
|
226 * and so the physical link state may have changed since we last |
|
227 * looked. Set get_link_status to make sure that the true link |
|
228 * state is interrogated, rather than pulling a cached and possibly |
|
229 * stale link state from the driver. |
|
230 */ |
|
231 if (!netif_carrier_ok(netdev)) |
|
232 adapter->hw.get_link_status = 1; |
|
233 |
|
234 return e1000_has_link(adapter); |
|
235 } |
|
236 |
|
237 static void e1000_get_pauseparam(struct net_device *netdev, |
|
238 struct ethtool_pauseparam *pause) |
|
239 { |
|
240 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
241 struct e1000_hw *hw = &adapter->hw; |
|
242 |
|
243 pause->autoneg = |
|
244 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); |
|
245 |
|
246 if (hw->fc == E1000_FC_RX_PAUSE) |
|
247 pause->rx_pause = 1; |
|
248 else if (hw->fc == E1000_FC_TX_PAUSE) |
|
249 pause->tx_pause = 1; |
|
250 else if (hw->fc == E1000_FC_FULL) { |
|
251 pause->rx_pause = 1; |
|
252 pause->tx_pause = 1; |
|
253 } |
|
254 } |
|
255 |
|
256 static int e1000_set_pauseparam(struct net_device *netdev, |
|
257 struct ethtool_pauseparam *pause) |
|
258 { |
|
259 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
260 struct e1000_hw *hw = &adapter->hw; |
|
261 int retval = 0; |
|
262 |
|
263 adapter->fc_autoneg = pause->autoneg; |
|
264 |
|
265 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) |
|
266 msleep(1); |
|
267 |
|
268 if (pause->rx_pause && pause->tx_pause) |
|
269 hw->fc = E1000_FC_FULL; |
|
270 else if (pause->rx_pause && !pause->tx_pause) |
|
271 hw->fc = E1000_FC_RX_PAUSE; |
|
272 else if (!pause->rx_pause && pause->tx_pause) |
|
273 hw->fc = E1000_FC_TX_PAUSE; |
|
274 else if (!pause->rx_pause && !pause->tx_pause) |
|
275 hw->fc = E1000_FC_NONE; |
|
276 |
|
277 hw->original_fc = hw->fc; |
|
278 |
|
279 if (adapter->fc_autoneg == AUTONEG_ENABLE) { |
|
280 if (netif_running(adapter->netdev)) { |
|
281 e1000_down(adapter); |
|
282 e1000_up(adapter); |
|
283 } else |
|
284 e1000_reset(adapter); |
|
285 } else |
|
286 retval = ((hw->media_type == e1000_media_type_fiber) ? |
|
287 e1000_setup_link(hw) : e1000_force_mac_fc(hw)); |
|
288 |
|
289 clear_bit(__E1000_RESETTING, &adapter->flags); |
|
290 return retval; |
|
291 } |
|
292 |
|
293 static u32 e1000_get_msglevel(struct net_device *netdev) |
|
294 { |
|
295 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
296 return adapter->msg_enable; |
|
297 } |
|
298 |
|
299 static void e1000_set_msglevel(struct net_device *netdev, u32 data) |
|
300 { |
|
301 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
302 adapter->msg_enable = data; |
|
303 } |
|
304 |
|
305 static int e1000_get_regs_len(struct net_device *netdev) |
|
306 { |
|
307 #define E1000_REGS_LEN 32 |
|
308 return E1000_REGS_LEN * sizeof(u32); |
|
309 } |
|
310 |
|
311 static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs, |
|
312 void *p) |
|
313 { |
|
314 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
315 struct e1000_hw *hw = &adapter->hw; |
|
316 u32 *regs_buff = p; |
|
317 u16 phy_data; |
|
318 |
|
319 memset(p, 0, E1000_REGS_LEN * sizeof(u32)); |
|
320 |
|
321 regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; |
|
322 |
|
323 regs_buff[0] = er32(CTRL); |
|
324 regs_buff[1] = er32(STATUS); |
|
325 |
|
326 regs_buff[2] = er32(RCTL); |
|
327 regs_buff[3] = er32(RDLEN); |
|
328 regs_buff[4] = er32(RDH); |
|
329 regs_buff[5] = er32(RDT); |
|
330 regs_buff[6] = er32(RDTR); |
|
331 |
|
332 regs_buff[7] = er32(TCTL); |
|
333 regs_buff[8] = er32(TDLEN); |
|
334 regs_buff[9] = er32(TDH); |
|
335 regs_buff[10] = er32(TDT); |
|
336 regs_buff[11] = er32(TIDV); |
|
337 |
|
338 regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */ |
|
339 if (hw->phy_type == e1000_phy_igp) { |
|
340 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
341 IGP01E1000_PHY_AGC_A); |
|
342 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A & |
|
343 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
344 regs_buff[13] = (u32)phy_data; /* cable length */ |
|
345 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
346 IGP01E1000_PHY_AGC_B); |
|
347 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B & |
|
348 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
349 regs_buff[14] = (u32)phy_data; /* cable length */ |
|
350 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
351 IGP01E1000_PHY_AGC_C); |
|
352 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C & |
|
353 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
354 regs_buff[15] = (u32)phy_data; /* cable length */ |
|
355 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
356 IGP01E1000_PHY_AGC_D); |
|
357 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D & |
|
358 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
359 regs_buff[16] = (u32)phy_data; /* cable length */ |
|
360 regs_buff[17] = 0; /* extended 10bt distance (not needed) */ |
|
361 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0); |
|
362 e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS & |
|
363 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
364 regs_buff[18] = (u32)phy_data; /* cable polarity */ |
|
365 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
366 IGP01E1000_PHY_PCS_INIT_REG); |
|
367 e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG & |
|
368 IGP01E1000_PHY_PAGE_SELECT, &phy_data); |
|
369 regs_buff[19] = (u32)phy_data; /* cable polarity */ |
|
370 regs_buff[20] = 0; /* polarity correction enabled (always) */ |
|
371 regs_buff[22] = 0; /* phy receive errors (unavailable) */ |
|
372 regs_buff[23] = regs_buff[18]; /* mdix mode */ |
|
373 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0); |
|
374 } else { |
|
375 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); |
|
376 regs_buff[13] = (u32)phy_data; /* cable length */ |
|
377 regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
378 regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
379 regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
380 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); |
|
381 regs_buff[17] = (u32)phy_data; /* extended 10bt distance */ |
|
382 regs_buff[18] = regs_buff[13]; /* cable polarity */ |
|
383 regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
384 regs_buff[20] = regs_buff[17]; /* polarity correction */ |
|
385 /* phy receive errors */ |
|
386 regs_buff[22] = adapter->phy_stats.receive_errors; |
|
387 regs_buff[23] = regs_buff[13]; /* mdix mode */ |
|
388 } |
|
389 regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ |
|
390 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); |
|
391 regs_buff[24] = (u32)phy_data; /* phy local receiver status */ |
|
392 regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ |
|
393 if (hw->mac_type >= e1000_82540 && |
|
394 hw->media_type == e1000_media_type_copper) { |
|
395 regs_buff[26] = er32(MANC); |
|
396 } |
|
397 } |
|
398 |
|
399 static int e1000_get_eeprom_len(struct net_device *netdev) |
|
400 { |
|
401 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
402 struct e1000_hw *hw = &adapter->hw; |
|
403 |
|
404 return hw->eeprom.word_size * 2; |
|
405 } |
|
406 |
|
407 static int e1000_get_eeprom(struct net_device *netdev, |
|
408 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
409 { |
|
410 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
411 struct e1000_hw *hw = &adapter->hw; |
|
412 u16 *eeprom_buff; |
|
413 int first_word, last_word; |
|
414 int ret_val = 0; |
|
415 u16 i; |
|
416 |
|
417 if (eeprom->len == 0) |
|
418 return -EINVAL; |
|
419 |
|
420 eeprom->magic = hw->vendor_id | (hw->device_id << 16); |
|
421 |
|
422 first_word = eeprom->offset >> 1; |
|
423 last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
|
424 |
|
425 eeprom_buff = kmalloc(sizeof(u16) * |
|
426 (last_word - first_word + 1), GFP_KERNEL); |
|
427 if (!eeprom_buff) |
|
428 return -ENOMEM; |
|
429 |
|
430 if (hw->eeprom.type == e1000_eeprom_spi) |
|
431 ret_val = e1000_read_eeprom(hw, first_word, |
|
432 last_word - first_word + 1, |
|
433 eeprom_buff); |
|
434 else { |
|
435 for (i = 0; i < last_word - first_word + 1; i++) { |
|
436 ret_val = e1000_read_eeprom(hw, first_word + i, 1, |
|
437 &eeprom_buff[i]); |
|
438 if (ret_val) |
|
439 break; |
|
440 } |
|
441 } |
|
442 |
|
443 /* Device's eeprom is always little-endian, word addressable */ |
|
444 for (i = 0; i < last_word - first_word + 1; i++) |
|
445 le16_to_cpus(&eeprom_buff[i]); |
|
446 |
|
447 memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), |
|
448 eeprom->len); |
|
449 kfree(eeprom_buff); |
|
450 |
|
451 return ret_val; |
|
452 } |
|
453 |
|
454 static int e1000_set_eeprom(struct net_device *netdev, |
|
455 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
456 { |
|
457 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
458 struct e1000_hw *hw = &adapter->hw; |
|
459 u16 *eeprom_buff; |
|
460 void *ptr; |
|
461 int max_len, first_word, last_word, ret_val = 0; |
|
462 u16 i; |
|
463 |
|
464 if (eeprom->len == 0) |
|
465 return -EOPNOTSUPP; |
|
466 |
|
467 if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) |
|
468 return -EFAULT; |
|
469 |
|
470 max_len = hw->eeprom.word_size * 2; |
|
471 |
|
472 first_word = eeprom->offset >> 1; |
|
473 last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
|
474 eeprom_buff = kmalloc(max_len, GFP_KERNEL); |
|
475 if (!eeprom_buff) |
|
476 return -ENOMEM; |
|
477 |
|
478 ptr = (void *)eeprom_buff; |
|
479 |
|
480 if (eeprom->offset & 1) { |
|
481 /* need read/modify/write of first changed EEPROM word */ |
|
482 /* only the second byte of the word is being modified */ |
|
483 ret_val = e1000_read_eeprom(hw, first_word, 1, |
|
484 &eeprom_buff[0]); |
|
485 ptr++; |
|
486 } |
|
487 if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { |
|
488 /* need read/modify/write of last changed EEPROM word */ |
|
489 /* only the first byte of the word is being modified */ |
|
490 ret_val = e1000_read_eeprom(hw, last_word, 1, |
|
491 &eeprom_buff[last_word - first_word]); |
|
492 } |
|
493 |
|
494 /* Device's eeprom is always little-endian, word addressable */ |
|
495 for (i = 0; i < last_word - first_word + 1; i++) |
|
496 le16_to_cpus(&eeprom_buff[i]); |
|
497 |
|
498 memcpy(ptr, bytes, eeprom->len); |
|
499 |
|
500 for (i = 0; i < last_word - first_word + 1; i++) |
|
501 eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); |
|
502 |
|
503 ret_val = e1000_write_eeprom(hw, first_word, |
|
504 last_word - first_word + 1, eeprom_buff); |
|
505 |
|
506 /* Update the checksum over the first part of the EEPROM if needed */ |
|
507 if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG)) |
|
508 e1000_update_eeprom_checksum(hw); |
|
509 |
|
510 kfree(eeprom_buff); |
|
511 return ret_val; |
|
512 } |
|
513 |
|
514 static void e1000_get_drvinfo(struct net_device *netdev, |
|
515 struct ethtool_drvinfo *drvinfo) |
|
516 { |
|
517 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
518 |
|
519 strlcpy(drvinfo->driver, e1000_driver_name, |
|
520 sizeof(drvinfo->driver)); |
|
521 strlcpy(drvinfo->version, e1000_driver_version, |
|
522 sizeof(drvinfo->version)); |
|
523 |
|
524 strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), |
|
525 sizeof(drvinfo->bus_info)); |
|
526 drvinfo->regdump_len = e1000_get_regs_len(netdev); |
|
527 drvinfo->eedump_len = e1000_get_eeprom_len(netdev); |
|
528 } |
|
529 |
|
530 static void e1000_get_ringparam(struct net_device *netdev, |
|
531 struct ethtool_ringparam *ring) |
|
532 { |
|
533 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
534 struct e1000_hw *hw = &adapter->hw; |
|
535 e1000_mac_type mac_type = hw->mac_type; |
|
536 struct e1000_tx_ring *txdr = adapter->tx_ring; |
|
537 struct e1000_rx_ring *rxdr = adapter->rx_ring; |
|
538 |
|
539 ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD : |
|
540 E1000_MAX_82544_RXD; |
|
541 ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD : |
|
542 E1000_MAX_82544_TXD; |
|
543 ring->rx_pending = rxdr->count; |
|
544 ring->tx_pending = txdr->count; |
|
545 } |
|
546 |
|
547 static int e1000_set_ringparam(struct net_device *netdev, |
|
548 struct ethtool_ringparam *ring) |
|
549 { |
|
550 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
551 struct e1000_hw *hw = &adapter->hw; |
|
552 e1000_mac_type mac_type = hw->mac_type; |
|
553 struct e1000_tx_ring *txdr, *tx_old; |
|
554 struct e1000_rx_ring *rxdr, *rx_old; |
|
555 int i, err; |
|
556 |
|
557 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) |
|
558 return -EINVAL; |
|
559 |
|
560 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) |
|
561 msleep(1); |
|
562 |
|
563 if (netif_running(adapter->netdev)) |
|
564 e1000_down(adapter); |
|
565 |
|
566 tx_old = adapter->tx_ring; |
|
567 rx_old = adapter->rx_ring; |
|
568 |
|
569 err = -ENOMEM; |
|
570 txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL); |
|
571 if (!txdr) |
|
572 goto err_alloc_tx; |
|
573 |
|
574 rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL); |
|
575 if (!rxdr) |
|
576 goto err_alloc_rx; |
|
577 |
|
578 adapter->tx_ring = txdr; |
|
579 adapter->rx_ring = rxdr; |
|
580 |
|
581 rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD); |
|
582 rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ? |
|
583 E1000_MAX_RXD : E1000_MAX_82544_RXD)); |
|
584 rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); |
|
585 |
|
586 txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD); |
|
587 txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ? |
|
588 E1000_MAX_TXD : E1000_MAX_82544_TXD)); |
|
589 txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); |
|
590 |
|
591 for (i = 0; i < adapter->num_tx_queues; i++) |
|
592 txdr[i].count = txdr->count; |
|
593 for (i = 0; i < adapter->num_rx_queues; i++) |
|
594 rxdr[i].count = rxdr->count; |
|
595 |
|
596 if (netif_running(adapter->netdev)) { |
|
597 /* Try to get new resources before deleting old */ |
|
598 err = e1000_setup_all_rx_resources(adapter); |
|
599 if (err) |
|
600 goto err_setup_rx; |
|
601 err = e1000_setup_all_tx_resources(adapter); |
|
602 if (err) |
|
603 goto err_setup_tx; |
|
604 |
|
605 /* save the new, restore the old in order to free it, |
|
606 * then restore the new back again */ |
|
607 |
|
608 adapter->rx_ring = rx_old; |
|
609 adapter->tx_ring = tx_old; |
|
610 e1000_free_all_rx_resources(adapter); |
|
611 e1000_free_all_tx_resources(adapter); |
|
612 kfree(tx_old); |
|
613 kfree(rx_old); |
|
614 adapter->rx_ring = rxdr; |
|
615 adapter->tx_ring = txdr; |
|
616 err = e1000_up(adapter); |
|
617 if (err) |
|
618 goto err_setup; |
|
619 } |
|
620 |
|
621 clear_bit(__E1000_RESETTING, &adapter->flags); |
|
622 return 0; |
|
623 err_setup_tx: |
|
624 e1000_free_all_rx_resources(adapter); |
|
625 err_setup_rx: |
|
626 adapter->rx_ring = rx_old; |
|
627 adapter->tx_ring = tx_old; |
|
628 kfree(rxdr); |
|
629 err_alloc_rx: |
|
630 kfree(txdr); |
|
631 err_alloc_tx: |
|
632 e1000_up(adapter); |
|
633 err_setup: |
|
634 clear_bit(__E1000_RESETTING, &adapter->flags); |
|
635 return err; |
|
636 } |
|
637 |
|
638 static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg, |
|
639 u32 mask, u32 write) |
|
640 { |
|
641 struct e1000_hw *hw = &adapter->hw; |
|
642 static const u32 test[] = |
|
643 {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; |
|
644 u8 __iomem *address = hw->hw_addr + reg; |
|
645 u32 read; |
|
646 int i; |
|
647 |
|
648 for (i = 0; i < ARRAY_SIZE(test); i++) { |
|
649 writel(write & test[i], address); |
|
650 read = readl(address); |
|
651 if (read != (write & test[i] & mask)) { |
|
652 e_err(drv, "pattern test reg %04X failed: " |
|
653 "got 0x%08X expected 0x%08X\n", |
|
654 reg, read, (write & test[i] & mask)); |
|
655 *data = reg; |
|
656 return true; |
|
657 } |
|
658 } |
|
659 return false; |
|
660 } |
|
661 |
|
662 static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg, |
|
663 u32 mask, u32 write) |
|
664 { |
|
665 struct e1000_hw *hw = &adapter->hw; |
|
666 u8 __iomem *address = hw->hw_addr + reg; |
|
667 u32 read; |
|
668 |
|
669 writel(write & mask, address); |
|
670 read = readl(address); |
|
671 if ((read & mask) != (write & mask)) { |
|
672 e_err(drv, "set/check reg %04X test failed: " |
|
673 "got 0x%08X expected 0x%08X\n", |
|
674 reg, (read & mask), (write & mask)); |
|
675 *data = reg; |
|
676 return true; |
|
677 } |
|
678 return false; |
|
679 } |
|
680 |
|
681 #define REG_PATTERN_TEST(reg, mask, write) \ |
|
682 do { \ |
|
683 if (reg_pattern_test(adapter, data, \ |
|
684 (hw->mac_type >= e1000_82543) \ |
|
685 ? E1000_##reg : E1000_82542_##reg, \ |
|
686 mask, write)) \ |
|
687 return 1; \ |
|
688 } while (0) |
|
689 |
|
690 #define REG_SET_AND_CHECK(reg, mask, write) \ |
|
691 do { \ |
|
692 if (reg_set_and_check(adapter, data, \ |
|
693 (hw->mac_type >= e1000_82543) \ |
|
694 ? E1000_##reg : E1000_82542_##reg, \ |
|
695 mask, write)) \ |
|
696 return 1; \ |
|
697 } while (0) |
|
698 |
|
699 static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) |
|
700 { |
|
701 u32 value, before, after; |
|
702 u32 i, toggle; |
|
703 struct e1000_hw *hw = &adapter->hw; |
|
704 |
|
705 /* The status register is Read Only, so a write should fail. |
|
706 * Some bits that get toggled are ignored. |
|
707 */ |
|
708 |
|
709 /* there are several bits on newer hardware that are r/w */ |
|
710 toggle = 0xFFFFF833; |
|
711 |
|
712 before = er32(STATUS); |
|
713 value = (er32(STATUS) & toggle); |
|
714 ew32(STATUS, toggle); |
|
715 after = er32(STATUS) & toggle; |
|
716 if (value != after) { |
|
717 e_err(drv, "failed STATUS register test got: " |
|
718 "0x%08X expected: 0x%08X\n", after, value); |
|
719 *data = 1; |
|
720 return 1; |
|
721 } |
|
722 /* restore previous status */ |
|
723 ew32(STATUS, before); |
|
724 |
|
725 REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); |
|
726 REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); |
|
727 REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); |
|
728 REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); |
|
729 |
|
730 REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); |
|
731 REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); |
|
732 REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); |
|
733 REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF); |
|
734 REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF); |
|
735 REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8); |
|
736 REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF); |
|
737 REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF); |
|
738 REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF); |
|
739 REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); |
|
740 |
|
741 REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); |
|
742 |
|
743 before = 0x06DFB3FE; |
|
744 REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); |
|
745 REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); |
|
746 |
|
747 if (hw->mac_type >= e1000_82543) { |
|
748 |
|
749 REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF); |
|
750 REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); |
|
751 REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF); |
|
752 REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); |
|
753 REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); |
|
754 value = E1000_RAR_ENTRIES; |
|
755 for (i = 0; i < value; i++) { |
|
756 REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, |
|
757 0xFFFFFFFF); |
|
758 } |
|
759 |
|
760 } else { |
|
761 |
|
762 REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF); |
|
763 REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF); |
|
764 REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF); |
|
765 REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF); |
|
766 |
|
767 } |
|
768 |
|
769 value = E1000_MC_TBL_SIZE; |
|
770 for (i = 0; i < value; i++) |
|
771 REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); |
|
772 |
|
773 *data = 0; |
|
774 return 0; |
|
775 } |
|
776 |
|
777 static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) |
|
778 { |
|
779 struct e1000_hw *hw = &adapter->hw; |
|
780 u16 temp; |
|
781 u16 checksum = 0; |
|
782 u16 i; |
|
783 |
|
784 *data = 0; |
|
785 /* Read and add up the contents of the EEPROM */ |
|
786 for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { |
|
787 if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) { |
|
788 *data = 1; |
|
789 break; |
|
790 } |
|
791 checksum += temp; |
|
792 } |
|
793 |
|
794 /* If Checksum is not Correct return error else test passed */ |
|
795 if ((checksum != (u16)EEPROM_SUM) && !(*data)) |
|
796 *data = 2; |
|
797 |
|
798 return *data; |
|
799 } |
|
800 |
|
801 static irqreturn_t e1000_test_intr(int irq, void *data) |
|
802 { |
|
803 struct net_device *netdev = (struct net_device *)data; |
|
804 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
805 struct e1000_hw *hw = &adapter->hw; |
|
806 |
|
807 adapter->test_icr |= er32(ICR); |
|
808 |
|
809 return IRQ_HANDLED; |
|
810 } |
|
811 |
|
812 static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) |
|
813 { |
|
814 struct net_device *netdev = adapter->netdev; |
|
815 u32 mask, i = 0; |
|
816 bool shared_int = true; |
|
817 u32 irq = adapter->pdev->irq; |
|
818 struct e1000_hw *hw = &adapter->hw; |
|
819 |
|
820 *data = 0; |
|
821 |
|
822 /* NOTE: we don't test MSI interrupts here, yet */ |
|
823 /* Hook up test interrupt handler just for this test */ |
|
824 if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, |
|
825 netdev)) |
|
826 shared_int = false; |
|
827 else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, |
|
828 netdev->name, netdev)) { |
|
829 *data = 1; |
|
830 return -1; |
|
831 } |
|
832 e_info(hw, "testing %s interrupt\n", (shared_int ? |
|
833 "shared" : "unshared")); |
|
834 |
|
835 /* Disable all the interrupts */ |
|
836 ew32(IMC, 0xFFFFFFFF); |
|
837 E1000_WRITE_FLUSH(); |
|
838 msleep(10); |
|
839 |
|
840 /* Test each interrupt */ |
|
841 for (; i < 10; i++) { |
|
842 |
|
843 /* Interrupt to test */ |
|
844 mask = 1 << i; |
|
845 |
|
846 if (!shared_int) { |
|
847 /* Disable the interrupt to be reported in |
|
848 * the cause register and then force the same |
|
849 * interrupt and see if one gets posted. If |
|
850 * an interrupt was posted to the bus, the |
|
851 * test failed. |
|
852 */ |
|
853 adapter->test_icr = 0; |
|
854 ew32(IMC, mask); |
|
855 ew32(ICS, mask); |
|
856 E1000_WRITE_FLUSH(); |
|
857 msleep(10); |
|
858 |
|
859 if (adapter->test_icr & mask) { |
|
860 *data = 3; |
|
861 break; |
|
862 } |
|
863 } |
|
864 |
|
865 /* Enable the interrupt to be reported in |
|
866 * the cause register and then force the same |
|
867 * interrupt and see if one gets posted. If |
|
868 * an interrupt was not posted to the bus, the |
|
869 * test failed. |
|
870 */ |
|
871 adapter->test_icr = 0; |
|
872 ew32(IMS, mask); |
|
873 ew32(ICS, mask); |
|
874 E1000_WRITE_FLUSH(); |
|
875 msleep(10); |
|
876 |
|
877 if (!(adapter->test_icr & mask)) { |
|
878 *data = 4; |
|
879 break; |
|
880 } |
|
881 |
|
882 if (!shared_int) { |
|
883 /* Disable the other interrupts to be reported in |
|
884 * the cause register and then force the other |
|
885 * interrupts and see if any get posted. If |
|
886 * an interrupt was posted to the bus, the |
|
887 * test failed. |
|
888 */ |
|
889 adapter->test_icr = 0; |
|
890 ew32(IMC, ~mask & 0x00007FFF); |
|
891 ew32(ICS, ~mask & 0x00007FFF); |
|
892 E1000_WRITE_FLUSH(); |
|
893 msleep(10); |
|
894 |
|
895 if (adapter->test_icr) { |
|
896 *data = 5; |
|
897 break; |
|
898 } |
|
899 } |
|
900 } |
|
901 |
|
902 /* Disable all the interrupts */ |
|
903 ew32(IMC, 0xFFFFFFFF); |
|
904 E1000_WRITE_FLUSH(); |
|
905 msleep(10); |
|
906 |
|
907 /* Unhook test interrupt handler */ |
|
908 free_irq(irq, netdev); |
|
909 |
|
910 return *data; |
|
911 } |
|
912 |
|
913 static void e1000_free_desc_rings(struct e1000_adapter *adapter) |
|
914 { |
|
915 struct e1000_tx_ring *txdr = &adapter->test_tx_ring; |
|
916 struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; |
|
917 struct pci_dev *pdev = adapter->pdev; |
|
918 int i; |
|
919 |
|
920 if (txdr->desc && txdr->buffer_info) { |
|
921 for (i = 0; i < txdr->count; i++) { |
|
922 if (txdr->buffer_info[i].dma) |
|
923 dma_unmap_single(&pdev->dev, |
|
924 txdr->buffer_info[i].dma, |
|
925 txdr->buffer_info[i].length, |
|
926 DMA_TO_DEVICE); |
|
927 if (txdr->buffer_info[i].skb) |
|
928 dev_kfree_skb(txdr->buffer_info[i].skb); |
|
929 } |
|
930 } |
|
931 |
|
932 if (rxdr->desc && rxdr->buffer_info) { |
|
933 for (i = 0; i < rxdr->count; i++) { |
|
934 if (rxdr->buffer_info[i].dma) |
|
935 dma_unmap_single(&pdev->dev, |
|
936 rxdr->buffer_info[i].dma, |
|
937 rxdr->buffer_info[i].length, |
|
938 DMA_FROM_DEVICE); |
|
939 if (rxdr->buffer_info[i].skb) |
|
940 dev_kfree_skb(rxdr->buffer_info[i].skb); |
|
941 } |
|
942 } |
|
943 |
|
944 if (txdr->desc) { |
|
945 dma_free_coherent(&pdev->dev, txdr->size, txdr->desc, |
|
946 txdr->dma); |
|
947 txdr->desc = NULL; |
|
948 } |
|
949 if (rxdr->desc) { |
|
950 dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc, |
|
951 rxdr->dma); |
|
952 rxdr->desc = NULL; |
|
953 } |
|
954 |
|
955 kfree(txdr->buffer_info); |
|
956 txdr->buffer_info = NULL; |
|
957 kfree(rxdr->buffer_info); |
|
958 rxdr->buffer_info = NULL; |
|
959 } |
|
960 |
|
961 static int e1000_setup_desc_rings(struct e1000_adapter *adapter) |
|
962 { |
|
963 struct e1000_hw *hw = &adapter->hw; |
|
964 struct e1000_tx_ring *txdr = &adapter->test_tx_ring; |
|
965 struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; |
|
966 struct pci_dev *pdev = adapter->pdev; |
|
967 u32 rctl; |
|
968 int i, ret_val; |
|
969 |
|
970 /* Setup Tx descriptor ring and Tx buffers */ |
|
971 |
|
972 if (!txdr->count) |
|
973 txdr->count = E1000_DEFAULT_TXD; |
|
974 |
|
975 txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer), |
|
976 GFP_KERNEL); |
|
977 if (!txdr->buffer_info) { |
|
978 ret_val = 1; |
|
979 goto err_nomem; |
|
980 } |
|
981 |
|
982 txdr->size = txdr->count * sizeof(struct e1000_tx_desc); |
|
983 txdr->size = ALIGN(txdr->size, 4096); |
|
984 txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma, |
|
985 GFP_KERNEL); |
|
986 if (!txdr->desc) { |
|
987 ret_val = 2; |
|
988 goto err_nomem; |
|
989 } |
|
990 memset(txdr->desc, 0, txdr->size); |
|
991 txdr->next_to_use = txdr->next_to_clean = 0; |
|
992 |
|
993 ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF)); |
|
994 ew32(TDBAH, ((u64)txdr->dma >> 32)); |
|
995 ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc)); |
|
996 ew32(TDH, 0); |
|
997 ew32(TDT, 0); |
|
998 ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | |
|
999 E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | |
|
1000 E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); |
|
1001 |
|
1002 for (i = 0; i < txdr->count; i++) { |
|
1003 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i); |
|
1004 struct sk_buff *skb; |
|
1005 unsigned int size = 1024; |
|
1006 |
|
1007 skb = alloc_skb(size, GFP_KERNEL); |
|
1008 if (!skb) { |
|
1009 ret_val = 3; |
|
1010 goto err_nomem; |
|
1011 } |
|
1012 skb_put(skb, size); |
|
1013 txdr->buffer_info[i].skb = skb; |
|
1014 txdr->buffer_info[i].length = skb->len; |
|
1015 txdr->buffer_info[i].dma = |
|
1016 dma_map_single(&pdev->dev, skb->data, skb->len, |
|
1017 DMA_TO_DEVICE); |
|
1018 tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); |
|
1019 tx_desc->lower.data = cpu_to_le32(skb->len); |
|
1020 tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | |
|
1021 E1000_TXD_CMD_IFCS | |
|
1022 E1000_TXD_CMD_RPS); |
|
1023 tx_desc->upper.data = 0; |
|
1024 } |
|
1025 |
|
1026 /* Setup Rx descriptor ring and Rx buffers */ |
|
1027 |
|
1028 if (!rxdr->count) |
|
1029 rxdr->count = E1000_DEFAULT_RXD; |
|
1030 |
|
1031 rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), |
|
1032 GFP_KERNEL); |
|
1033 if (!rxdr->buffer_info) { |
|
1034 ret_val = 4; |
|
1035 goto err_nomem; |
|
1036 } |
|
1037 |
|
1038 rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); |
|
1039 rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, |
|
1040 GFP_KERNEL); |
|
1041 if (!rxdr->desc) { |
|
1042 ret_val = 5; |
|
1043 goto err_nomem; |
|
1044 } |
|
1045 memset(rxdr->desc, 0, rxdr->size); |
|
1046 rxdr->next_to_use = rxdr->next_to_clean = 0; |
|
1047 |
|
1048 rctl = er32(RCTL); |
|
1049 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
1050 ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF)); |
|
1051 ew32(RDBAH, ((u64)rxdr->dma >> 32)); |
|
1052 ew32(RDLEN, rxdr->size); |
|
1053 ew32(RDH, 0); |
|
1054 ew32(RDT, 0); |
|
1055 rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | |
|
1056 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | |
|
1057 (hw->mc_filter_type << E1000_RCTL_MO_SHIFT); |
|
1058 ew32(RCTL, rctl); |
|
1059 |
|
1060 for (i = 0; i < rxdr->count; i++) { |
|
1061 struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); |
|
1062 struct sk_buff *skb; |
|
1063 |
|
1064 skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); |
|
1065 if (!skb) { |
|
1066 ret_val = 6; |
|
1067 goto err_nomem; |
|
1068 } |
|
1069 skb_reserve(skb, NET_IP_ALIGN); |
|
1070 rxdr->buffer_info[i].skb = skb; |
|
1071 rxdr->buffer_info[i].length = E1000_RXBUFFER_2048; |
|
1072 rxdr->buffer_info[i].dma = |
|
1073 dma_map_single(&pdev->dev, skb->data, |
|
1074 E1000_RXBUFFER_2048, DMA_FROM_DEVICE); |
|
1075 rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); |
|
1076 memset(skb->data, 0x00, skb->len); |
|
1077 } |
|
1078 |
|
1079 return 0; |
|
1080 |
|
1081 err_nomem: |
|
1082 e1000_free_desc_rings(adapter); |
|
1083 return ret_val; |
|
1084 } |
|
1085 |
|
1086 static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) |
|
1087 { |
|
1088 struct e1000_hw *hw = &adapter->hw; |
|
1089 |
|
1090 /* Write out to PHY registers 29 and 30 to disable the Receiver. */ |
|
1091 e1000_write_phy_reg(hw, 29, 0x001F); |
|
1092 e1000_write_phy_reg(hw, 30, 0x8FFC); |
|
1093 e1000_write_phy_reg(hw, 29, 0x001A); |
|
1094 e1000_write_phy_reg(hw, 30, 0x8FF0); |
|
1095 } |
|
1096 |
|
1097 static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter) |
|
1098 { |
|
1099 struct e1000_hw *hw = &adapter->hw; |
|
1100 u16 phy_reg; |
|
1101 |
|
1102 /* Because we reset the PHY above, we need to re-force TX_CLK in the |
|
1103 * Extended PHY Specific Control Register to 25MHz clock. This |
|
1104 * value defaults back to a 2.5MHz clock when the PHY is reset. |
|
1105 */ |
|
1106 e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); |
|
1107 phy_reg |= M88E1000_EPSCR_TX_CLK_25; |
|
1108 e1000_write_phy_reg(hw, |
|
1109 M88E1000_EXT_PHY_SPEC_CTRL, phy_reg); |
|
1110 |
|
1111 /* In addition, because of the s/w reset above, we need to enable |
|
1112 * CRS on TX. This must be set for both full and half duplex |
|
1113 * operation. |
|
1114 */ |
|
1115 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); |
|
1116 phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX; |
|
1117 e1000_write_phy_reg(hw, |
|
1118 M88E1000_PHY_SPEC_CTRL, phy_reg); |
|
1119 } |
|
1120 |
|
1121 static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) |
|
1122 { |
|
1123 struct e1000_hw *hw = &adapter->hw; |
|
1124 u32 ctrl_reg; |
|
1125 u16 phy_reg; |
|
1126 |
|
1127 /* Setup the Device Control Register for PHY loopback test. */ |
|
1128 |
|
1129 ctrl_reg = er32(CTRL); |
|
1130 ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */ |
|
1131 E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ |
|
1132 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ |
|
1133 E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */ |
|
1134 E1000_CTRL_FD); /* Force Duplex to FULL */ |
|
1135 |
|
1136 ew32(CTRL, ctrl_reg); |
|
1137 |
|
1138 /* Read the PHY Specific Control Register (0x10) */ |
|
1139 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg); |
|
1140 |
|
1141 /* Clear Auto-Crossover bits in PHY Specific Control Register |
|
1142 * (bits 6:5). |
|
1143 */ |
|
1144 phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE; |
|
1145 e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg); |
|
1146 |
|
1147 /* Perform software reset on the PHY */ |
|
1148 e1000_phy_reset(hw); |
|
1149 |
|
1150 /* Have to setup TX_CLK and TX_CRS after software reset */ |
|
1151 e1000_phy_reset_clk_and_crs(adapter); |
|
1152 |
|
1153 e1000_write_phy_reg(hw, PHY_CTRL, 0x8100); |
|
1154 |
|
1155 /* Wait for reset to complete. */ |
|
1156 udelay(500); |
|
1157 |
|
1158 /* Have to setup TX_CLK and TX_CRS after software reset */ |
|
1159 e1000_phy_reset_clk_and_crs(adapter); |
|
1160 |
|
1161 /* Write out to PHY registers 29 and 30 to disable the Receiver. */ |
|
1162 e1000_phy_disable_receiver(adapter); |
|
1163 |
|
1164 /* Set the loopback bit in the PHY control register. */ |
|
1165 e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); |
|
1166 phy_reg |= MII_CR_LOOPBACK; |
|
1167 e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); |
|
1168 |
|
1169 /* Setup TX_CLK and TX_CRS one more time. */ |
|
1170 e1000_phy_reset_clk_and_crs(adapter); |
|
1171 |
|
1172 /* Check Phy Configuration */ |
|
1173 e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); |
|
1174 if (phy_reg != 0x4100) |
|
1175 return 9; |
|
1176 |
|
1177 e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); |
|
1178 if (phy_reg != 0x0070) |
|
1179 return 10; |
|
1180 |
|
1181 e1000_read_phy_reg(hw, 29, &phy_reg); |
|
1182 if (phy_reg != 0x001A) |
|
1183 return 11; |
|
1184 |
|
1185 return 0; |
|
1186 } |
|
1187 |
|
1188 static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) |
|
1189 { |
|
1190 struct e1000_hw *hw = &adapter->hw; |
|
1191 u32 ctrl_reg = 0; |
|
1192 u32 stat_reg = 0; |
|
1193 |
|
1194 hw->autoneg = false; |
|
1195 |
|
1196 if (hw->phy_type == e1000_phy_m88) { |
|
1197 /* Auto-MDI/MDIX Off */ |
|
1198 e1000_write_phy_reg(hw, |
|
1199 M88E1000_PHY_SPEC_CTRL, 0x0808); |
|
1200 /* reset to update Auto-MDI/MDIX */ |
|
1201 e1000_write_phy_reg(hw, PHY_CTRL, 0x9140); |
|
1202 /* autoneg off */ |
|
1203 e1000_write_phy_reg(hw, PHY_CTRL, 0x8140); |
|
1204 } |
|
1205 |
|
1206 ctrl_reg = er32(CTRL); |
|
1207 |
|
1208 /* force 1000, set loopback */ |
|
1209 e1000_write_phy_reg(hw, PHY_CTRL, 0x4140); |
|
1210 |
|
1211 /* Now set up the MAC to the same speed/duplex as the PHY. */ |
|
1212 ctrl_reg = er32(CTRL); |
|
1213 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ |
|
1214 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ |
|
1215 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ |
|
1216 E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ |
|
1217 E1000_CTRL_FD); /* Force Duplex to FULL */ |
|
1218 |
|
1219 if (hw->media_type == e1000_media_type_copper && |
|
1220 hw->phy_type == e1000_phy_m88) |
|
1221 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ |
|
1222 else { |
|
1223 /* Set the ILOS bit on the fiber Nic is half |
|
1224 * duplex link is detected. */ |
|
1225 stat_reg = er32(STATUS); |
|
1226 if ((stat_reg & E1000_STATUS_FD) == 0) |
|
1227 ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); |
|
1228 } |
|
1229 |
|
1230 ew32(CTRL, ctrl_reg); |
|
1231 |
|
1232 /* Disable the receiver on the PHY so when a cable is plugged in, the |
|
1233 * PHY does not begin to autoneg when a cable is reconnected to the NIC. |
|
1234 */ |
|
1235 if (hw->phy_type == e1000_phy_m88) |
|
1236 e1000_phy_disable_receiver(adapter); |
|
1237 |
|
1238 udelay(500); |
|
1239 |
|
1240 return 0; |
|
1241 } |
|
1242 |
|
1243 static int e1000_set_phy_loopback(struct e1000_adapter *adapter) |
|
1244 { |
|
1245 struct e1000_hw *hw = &adapter->hw; |
|
1246 u16 phy_reg = 0; |
|
1247 u16 count = 0; |
|
1248 |
|
1249 switch (hw->mac_type) { |
|
1250 case e1000_82543: |
|
1251 if (hw->media_type == e1000_media_type_copper) { |
|
1252 /* Attempt to setup Loopback mode on Non-integrated PHY. |
|
1253 * Some PHY registers get corrupted at random, so |
|
1254 * attempt this 10 times. |
|
1255 */ |
|
1256 while (e1000_nonintegrated_phy_loopback(adapter) && |
|
1257 count++ < 10); |
|
1258 if (count < 11) |
|
1259 return 0; |
|
1260 } |
|
1261 break; |
|
1262 |
|
1263 case e1000_82544: |
|
1264 case e1000_82540: |
|
1265 case e1000_82545: |
|
1266 case e1000_82545_rev_3: |
|
1267 case e1000_82546: |
|
1268 case e1000_82546_rev_3: |
|
1269 case e1000_82541: |
|
1270 case e1000_82541_rev_2: |
|
1271 case e1000_82547: |
|
1272 case e1000_82547_rev_2: |
|
1273 return e1000_integrated_phy_loopback(adapter); |
|
1274 break; |
|
1275 default: |
|
1276 /* Default PHY loopback work is to read the MII |
|
1277 * control register and assert bit 14 (loopback mode). |
|
1278 */ |
|
1279 e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); |
|
1280 phy_reg |= MII_CR_LOOPBACK; |
|
1281 e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); |
|
1282 return 0; |
|
1283 break; |
|
1284 } |
|
1285 |
|
1286 return 8; |
|
1287 } |
|
1288 |
|
1289 static int e1000_setup_loopback_test(struct e1000_adapter *adapter) |
|
1290 { |
|
1291 struct e1000_hw *hw = &adapter->hw; |
|
1292 u32 rctl; |
|
1293 |
|
1294 if (hw->media_type == e1000_media_type_fiber || |
|
1295 hw->media_type == e1000_media_type_internal_serdes) { |
|
1296 switch (hw->mac_type) { |
|
1297 case e1000_82545: |
|
1298 case e1000_82546: |
|
1299 case e1000_82545_rev_3: |
|
1300 case e1000_82546_rev_3: |
|
1301 return e1000_set_phy_loopback(adapter); |
|
1302 break; |
|
1303 default: |
|
1304 rctl = er32(RCTL); |
|
1305 rctl |= E1000_RCTL_LBM_TCVR; |
|
1306 ew32(RCTL, rctl); |
|
1307 return 0; |
|
1308 } |
|
1309 } else if (hw->media_type == e1000_media_type_copper) |
|
1310 return e1000_set_phy_loopback(adapter); |
|
1311 |
|
1312 return 7; |
|
1313 } |
|
1314 |
|
1315 static void e1000_loopback_cleanup(struct e1000_adapter *adapter) |
|
1316 { |
|
1317 struct e1000_hw *hw = &adapter->hw; |
|
1318 u32 rctl; |
|
1319 u16 phy_reg; |
|
1320 |
|
1321 rctl = er32(RCTL); |
|
1322 rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); |
|
1323 ew32(RCTL, rctl); |
|
1324 |
|
1325 switch (hw->mac_type) { |
|
1326 case e1000_82545: |
|
1327 case e1000_82546: |
|
1328 case e1000_82545_rev_3: |
|
1329 case e1000_82546_rev_3: |
|
1330 default: |
|
1331 hw->autoneg = true; |
|
1332 e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); |
|
1333 if (phy_reg & MII_CR_LOOPBACK) { |
|
1334 phy_reg &= ~MII_CR_LOOPBACK; |
|
1335 e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); |
|
1336 e1000_phy_reset(hw); |
|
1337 } |
|
1338 break; |
|
1339 } |
|
1340 } |
|
1341 |
|
1342 static void e1000_create_lbtest_frame(struct sk_buff *skb, |
|
1343 unsigned int frame_size) |
|
1344 { |
|
1345 memset(skb->data, 0xFF, frame_size); |
|
1346 frame_size &= ~1; |
|
1347 memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); |
|
1348 memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); |
|
1349 memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); |
|
1350 } |
|
1351 |
|
1352 static int e1000_check_lbtest_frame(struct sk_buff *skb, |
|
1353 unsigned int frame_size) |
|
1354 { |
|
1355 frame_size &= ~1; |
|
1356 if (*(skb->data + 3) == 0xFF) { |
|
1357 if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && |
|
1358 (*(skb->data + frame_size / 2 + 12) == 0xAF)) { |
|
1359 return 0; |
|
1360 } |
|
1361 } |
|
1362 return 13; |
|
1363 } |
|
1364 |
|
1365 static int e1000_run_loopback_test(struct e1000_adapter *adapter) |
|
1366 { |
|
1367 struct e1000_hw *hw = &adapter->hw; |
|
1368 struct e1000_tx_ring *txdr = &adapter->test_tx_ring; |
|
1369 struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; |
|
1370 struct pci_dev *pdev = adapter->pdev; |
|
1371 int i, j, k, l, lc, good_cnt, ret_val=0; |
|
1372 unsigned long time; |
|
1373 |
|
1374 ew32(RDT, rxdr->count - 1); |
|
1375 |
|
1376 /* Calculate the loop count based on the largest descriptor ring |
|
1377 * The idea is to wrap the largest ring a number of times using 64 |
|
1378 * send/receive pairs during each loop |
|
1379 */ |
|
1380 |
|
1381 if (rxdr->count <= txdr->count) |
|
1382 lc = ((txdr->count / 64) * 2) + 1; |
|
1383 else |
|
1384 lc = ((rxdr->count / 64) * 2) + 1; |
|
1385 |
|
1386 k = l = 0; |
|
1387 for (j = 0; j <= lc; j++) { /* loop count loop */ |
|
1388 for (i = 0; i < 64; i++) { /* send the packets */ |
|
1389 e1000_create_lbtest_frame(txdr->buffer_info[i].skb, |
|
1390 1024); |
|
1391 dma_sync_single_for_device(&pdev->dev, |
|
1392 txdr->buffer_info[k].dma, |
|
1393 txdr->buffer_info[k].length, |
|
1394 DMA_TO_DEVICE); |
|
1395 if (unlikely(++k == txdr->count)) k = 0; |
|
1396 } |
|
1397 ew32(TDT, k); |
|
1398 E1000_WRITE_FLUSH(); |
|
1399 msleep(200); |
|
1400 time = jiffies; /* set the start time for the receive */ |
|
1401 good_cnt = 0; |
|
1402 do { /* receive the sent packets */ |
|
1403 dma_sync_single_for_cpu(&pdev->dev, |
|
1404 rxdr->buffer_info[l].dma, |
|
1405 rxdr->buffer_info[l].length, |
|
1406 DMA_FROM_DEVICE); |
|
1407 |
|
1408 ret_val = e1000_check_lbtest_frame( |
|
1409 rxdr->buffer_info[l].skb, |
|
1410 1024); |
|
1411 if (!ret_val) |
|
1412 good_cnt++; |
|
1413 if (unlikely(++l == rxdr->count)) l = 0; |
|
1414 /* time + 20 msecs (200 msecs on 2.4) is more than |
|
1415 * enough time to complete the receives, if it's |
|
1416 * exceeded, break and error off |
|
1417 */ |
|
1418 } while (good_cnt < 64 && jiffies < (time + 20)); |
|
1419 if (good_cnt != 64) { |
|
1420 ret_val = 13; /* ret_val is the same as mis-compare */ |
|
1421 break; |
|
1422 } |
|
1423 if (jiffies >= (time + 2)) { |
|
1424 ret_val = 14; /* error code for time out error */ |
|
1425 break; |
|
1426 } |
|
1427 } /* end loop count loop */ |
|
1428 return ret_val; |
|
1429 } |
|
1430 |
|
1431 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) |
|
1432 { |
|
1433 *data = e1000_setup_desc_rings(adapter); |
|
1434 if (*data) |
|
1435 goto out; |
|
1436 *data = e1000_setup_loopback_test(adapter); |
|
1437 if (*data) |
|
1438 goto err_loopback; |
|
1439 *data = e1000_run_loopback_test(adapter); |
|
1440 e1000_loopback_cleanup(adapter); |
|
1441 |
|
1442 err_loopback: |
|
1443 e1000_free_desc_rings(adapter); |
|
1444 out: |
|
1445 return *data; |
|
1446 } |
|
1447 |
|
1448 static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) |
|
1449 { |
|
1450 struct e1000_hw *hw = &adapter->hw; |
|
1451 *data = 0; |
|
1452 if (hw->media_type == e1000_media_type_internal_serdes) { |
|
1453 int i = 0; |
|
1454 hw->serdes_has_link = false; |
|
1455 |
|
1456 /* On some blade server designs, link establishment |
|
1457 * could take as long as 2-3 minutes */ |
|
1458 do { |
|
1459 e1000_check_for_link(hw); |
|
1460 if (hw->serdes_has_link) |
|
1461 return *data; |
|
1462 msleep(20); |
|
1463 } while (i++ < 3750); |
|
1464 |
|
1465 *data = 1; |
|
1466 } else { |
|
1467 e1000_check_for_link(hw); |
|
1468 if (hw->autoneg) /* if auto_neg is set wait for it */ |
|
1469 msleep(4000); |
|
1470 |
|
1471 if (!(er32(STATUS) & E1000_STATUS_LU)) { |
|
1472 *data = 1; |
|
1473 } |
|
1474 } |
|
1475 return *data; |
|
1476 } |
|
1477 |
|
1478 static int e1000_get_sset_count(struct net_device *netdev, int sset) |
|
1479 { |
|
1480 switch (sset) { |
|
1481 case ETH_SS_TEST: |
|
1482 return E1000_TEST_LEN; |
|
1483 case ETH_SS_STATS: |
|
1484 return E1000_STATS_LEN; |
|
1485 default: |
|
1486 return -EOPNOTSUPP; |
|
1487 } |
|
1488 } |
|
1489 |
|
1490 static void e1000_diag_test(struct net_device *netdev, |
|
1491 struct ethtool_test *eth_test, u64 *data) |
|
1492 { |
|
1493 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1494 struct e1000_hw *hw = &adapter->hw; |
|
1495 bool if_running = netif_running(netdev); |
|
1496 |
|
1497 set_bit(__E1000_TESTING, &adapter->flags); |
|
1498 if (eth_test->flags == ETH_TEST_FL_OFFLINE) { |
|
1499 /* Offline tests */ |
|
1500 |
|
1501 /* save speed, duplex, autoneg settings */ |
|
1502 u16 autoneg_advertised = hw->autoneg_advertised; |
|
1503 u8 forced_speed_duplex = hw->forced_speed_duplex; |
|
1504 u8 autoneg = hw->autoneg; |
|
1505 |
|
1506 e_info(hw, "offline testing starting\n"); |
|
1507 |
|
1508 /* Link test performed before hardware reset so autoneg doesn't |
|
1509 * interfere with test result */ |
|
1510 if (e1000_link_test(adapter, &data[4])) |
|
1511 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1512 |
|
1513 if (if_running) |
|
1514 /* indicate we're in test mode */ |
|
1515 dev_close(netdev); |
|
1516 else |
|
1517 e1000_reset(adapter); |
|
1518 |
|
1519 if (e1000_reg_test(adapter, &data[0])) |
|
1520 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1521 |
|
1522 e1000_reset(adapter); |
|
1523 if (e1000_eeprom_test(adapter, &data[1])) |
|
1524 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1525 |
|
1526 e1000_reset(adapter); |
|
1527 if (e1000_intr_test(adapter, &data[2])) |
|
1528 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1529 |
|
1530 e1000_reset(adapter); |
|
1531 /* make sure the phy is powered up */ |
|
1532 e1000_power_up_phy(adapter); |
|
1533 if (e1000_loopback_test(adapter, &data[3])) |
|
1534 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1535 |
|
1536 /* restore speed, duplex, autoneg settings */ |
|
1537 hw->autoneg_advertised = autoneg_advertised; |
|
1538 hw->forced_speed_duplex = forced_speed_duplex; |
|
1539 hw->autoneg = autoneg; |
|
1540 |
|
1541 e1000_reset(adapter); |
|
1542 clear_bit(__E1000_TESTING, &adapter->flags); |
|
1543 if (if_running) |
|
1544 dev_open(netdev); |
|
1545 } else { |
|
1546 e_info(hw, "online testing starting\n"); |
|
1547 /* Online tests */ |
|
1548 if (e1000_link_test(adapter, &data[4])) |
|
1549 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1550 |
|
1551 /* Online tests aren't run; pass by default */ |
|
1552 data[0] = 0; |
|
1553 data[1] = 0; |
|
1554 data[2] = 0; |
|
1555 data[3] = 0; |
|
1556 |
|
1557 clear_bit(__E1000_TESTING, &adapter->flags); |
|
1558 } |
|
1559 msleep_interruptible(4 * 1000); |
|
1560 } |
|
1561 |
|
1562 static int e1000_wol_exclusion(struct e1000_adapter *adapter, |
|
1563 struct ethtool_wolinfo *wol) |
|
1564 { |
|
1565 struct e1000_hw *hw = &adapter->hw; |
|
1566 int retval = 1; /* fail by default */ |
|
1567 |
|
1568 switch (hw->device_id) { |
|
1569 case E1000_DEV_ID_82542: |
|
1570 case E1000_DEV_ID_82543GC_FIBER: |
|
1571 case E1000_DEV_ID_82543GC_COPPER: |
|
1572 case E1000_DEV_ID_82544EI_FIBER: |
|
1573 case E1000_DEV_ID_82546EB_QUAD_COPPER: |
|
1574 case E1000_DEV_ID_82545EM_FIBER: |
|
1575 case E1000_DEV_ID_82545EM_COPPER: |
|
1576 case E1000_DEV_ID_82546GB_QUAD_COPPER: |
|
1577 case E1000_DEV_ID_82546GB_PCIE: |
|
1578 /* these don't support WoL at all */ |
|
1579 wol->supported = 0; |
|
1580 break; |
|
1581 case E1000_DEV_ID_82546EB_FIBER: |
|
1582 case E1000_DEV_ID_82546GB_FIBER: |
|
1583 /* Wake events not supported on port B */ |
|
1584 if (er32(STATUS) & E1000_STATUS_FUNC_1) { |
|
1585 wol->supported = 0; |
|
1586 break; |
|
1587 } |
|
1588 /* return success for non excluded adapter ports */ |
|
1589 retval = 0; |
|
1590 break; |
|
1591 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: |
|
1592 /* quad port adapters only support WoL on port A */ |
|
1593 if (!adapter->quad_port_a) { |
|
1594 wol->supported = 0; |
|
1595 break; |
|
1596 } |
|
1597 /* return success for non excluded adapter ports */ |
|
1598 retval = 0; |
|
1599 break; |
|
1600 default: |
|
1601 /* dual port cards only support WoL on port A from now on |
|
1602 * unless it was enabled in the eeprom for port B |
|
1603 * so exclude FUNC_1 ports from having WoL enabled */ |
|
1604 if (er32(STATUS) & E1000_STATUS_FUNC_1 && |
|
1605 !adapter->eeprom_wol) { |
|
1606 wol->supported = 0; |
|
1607 break; |
|
1608 } |
|
1609 |
|
1610 retval = 0; |
|
1611 } |
|
1612 |
|
1613 return retval; |
|
1614 } |
|
1615 |
|
1616 static void e1000_get_wol(struct net_device *netdev, |
|
1617 struct ethtool_wolinfo *wol) |
|
1618 { |
|
1619 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1620 struct e1000_hw *hw = &adapter->hw; |
|
1621 |
|
1622 wol->supported = WAKE_UCAST | WAKE_MCAST | |
|
1623 WAKE_BCAST | WAKE_MAGIC; |
|
1624 wol->wolopts = 0; |
|
1625 |
|
1626 /* this function will set ->supported = 0 and return 1 if wol is not |
|
1627 * supported by this hardware */ |
|
1628 if (e1000_wol_exclusion(adapter, wol) || |
|
1629 !device_can_wakeup(&adapter->pdev->dev)) |
|
1630 return; |
|
1631 |
|
1632 /* apply any specific unsupported masks here */ |
|
1633 switch (hw->device_id) { |
|
1634 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: |
|
1635 /* KSP3 does not suppport UCAST wake-ups */ |
|
1636 wol->supported &= ~WAKE_UCAST; |
|
1637 |
|
1638 if (adapter->wol & E1000_WUFC_EX) |
|
1639 e_err(drv, "Interface does not support directed " |
|
1640 "(unicast) frame wake-up packets\n"); |
|
1641 break; |
|
1642 default: |
|
1643 break; |
|
1644 } |
|
1645 |
|
1646 if (adapter->wol & E1000_WUFC_EX) |
|
1647 wol->wolopts |= WAKE_UCAST; |
|
1648 if (adapter->wol & E1000_WUFC_MC) |
|
1649 wol->wolopts |= WAKE_MCAST; |
|
1650 if (adapter->wol & E1000_WUFC_BC) |
|
1651 wol->wolopts |= WAKE_BCAST; |
|
1652 if (adapter->wol & E1000_WUFC_MAG) |
|
1653 wol->wolopts |= WAKE_MAGIC; |
|
1654 } |
|
1655 |
|
1656 static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) |
|
1657 { |
|
1658 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1659 struct e1000_hw *hw = &adapter->hw; |
|
1660 |
|
1661 if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) |
|
1662 return -EOPNOTSUPP; |
|
1663 |
|
1664 if (e1000_wol_exclusion(adapter, wol) || |
|
1665 !device_can_wakeup(&adapter->pdev->dev)) |
|
1666 return wol->wolopts ? -EOPNOTSUPP : 0; |
|
1667 |
|
1668 switch (hw->device_id) { |
|
1669 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: |
|
1670 if (wol->wolopts & WAKE_UCAST) { |
|
1671 e_err(drv, "Interface does not support directed " |
|
1672 "(unicast) frame wake-up packets\n"); |
|
1673 return -EOPNOTSUPP; |
|
1674 } |
|
1675 break; |
|
1676 default: |
|
1677 break; |
|
1678 } |
|
1679 |
|
1680 /* these settings will always override what we currently have */ |
|
1681 adapter->wol = 0; |
|
1682 |
|
1683 if (wol->wolopts & WAKE_UCAST) |
|
1684 adapter->wol |= E1000_WUFC_EX; |
|
1685 if (wol->wolopts & WAKE_MCAST) |
|
1686 adapter->wol |= E1000_WUFC_MC; |
|
1687 if (wol->wolopts & WAKE_BCAST) |
|
1688 adapter->wol |= E1000_WUFC_BC; |
|
1689 if (wol->wolopts & WAKE_MAGIC) |
|
1690 adapter->wol |= E1000_WUFC_MAG; |
|
1691 |
|
1692 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
|
1693 |
|
1694 return 0; |
|
1695 } |
|
1696 |
|
1697 static int e1000_set_phys_id(struct net_device *netdev, |
|
1698 enum ethtool_phys_id_state state) |
|
1699 { |
|
1700 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1701 struct e1000_hw *hw = &adapter->hw; |
|
1702 |
|
1703 switch (state) { |
|
1704 case ETHTOOL_ID_ACTIVE: |
|
1705 e1000_setup_led(hw); |
|
1706 return 2; |
|
1707 |
|
1708 case ETHTOOL_ID_ON: |
|
1709 e1000_led_on(hw); |
|
1710 break; |
|
1711 |
|
1712 case ETHTOOL_ID_OFF: |
|
1713 e1000_led_off(hw); |
|
1714 break; |
|
1715 |
|
1716 case ETHTOOL_ID_INACTIVE: |
|
1717 e1000_cleanup_led(hw); |
|
1718 } |
|
1719 |
|
1720 return 0; |
|
1721 } |
|
1722 |
|
1723 static int e1000_get_coalesce(struct net_device *netdev, |
|
1724 struct ethtool_coalesce *ec) |
|
1725 { |
|
1726 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1727 |
|
1728 if (adapter->hw.mac_type < e1000_82545) |
|
1729 return -EOPNOTSUPP; |
|
1730 |
|
1731 if (adapter->itr_setting <= 4) |
|
1732 ec->rx_coalesce_usecs = adapter->itr_setting; |
|
1733 else |
|
1734 ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting; |
|
1735 |
|
1736 return 0; |
|
1737 } |
|
1738 |
|
1739 static int e1000_set_coalesce(struct net_device *netdev, |
|
1740 struct ethtool_coalesce *ec) |
|
1741 { |
|
1742 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1743 struct e1000_hw *hw = &adapter->hw; |
|
1744 |
|
1745 if (hw->mac_type < e1000_82545) |
|
1746 return -EOPNOTSUPP; |
|
1747 |
|
1748 if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) || |
|
1749 ((ec->rx_coalesce_usecs > 4) && |
|
1750 (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) || |
|
1751 (ec->rx_coalesce_usecs == 2)) |
|
1752 return -EINVAL; |
|
1753 |
|
1754 if (ec->rx_coalesce_usecs == 4) { |
|
1755 adapter->itr = adapter->itr_setting = 4; |
|
1756 } else if (ec->rx_coalesce_usecs <= 3) { |
|
1757 adapter->itr = 20000; |
|
1758 adapter->itr_setting = ec->rx_coalesce_usecs; |
|
1759 } else { |
|
1760 adapter->itr = (1000000 / ec->rx_coalesce_usecs); |
|
1761 adapter->itr_setting = adapter->itr & ~3; |
|
1762 } |
|
1763 |
|
1764 if (adapter->itr_setting != 0) |
|
1765 ew32(ITR, 1000000000 / (adapter->itr * 256)); |
|
1766 else |
|
1767 ew32(ITR, 0); |
|
1768 |
|
1769 return 0; |
|
1770 } |
|
1771 |
|
1772 static int e1000_nway_reset(struct net_device *netdev) |
|
1773 { |
|
1774 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1775 if (netif_running(netdev)) |
|
1776 e1000_reinit_locked(adapter); |
|
1777 return 0; |
|
1778 } |
|
1779 |
|
1780 static void e1000_get_ethtool_stats(struct net_device *netdev, |
|
1781 struct ethtool_stats *stats, u64 *data) |
|
1782 { |
|
1783 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1784 int i; |
|
1785 char *p = NULL; |
|
1786 |
|
1787 e1000_update_stats(adapter); |
|
1788 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { |
|
1789 switch (e1000_gstrings_stats[i].type) { |
|
1790 case NETDEV_STATS: |
|
1791 p = (char *) netdev + |
|
1792 e1000_gstrings_stats[i].stat_offset; |
|
1793 break; |
|
1794 case E1000_STATS: |
|
1795 p = (char *) adapter + |
|
1796 e1000_gstrings_stats[i].stat_offset; |
|
1797 break; |
|
1798 } |
|
1799 |
|
1800 data[i] = (e1000_gstrings_stats[i].sizeof_stat == |
|
1801 sizeof(u64)) ? *(u64 *)p : *(u32 *)p; |
|
1802 } |
|
1803 /* BUG_ON(i != E1000_STATS_LEN); */ |
|
1804 } |
|
1805 |
|
1806 static void e1000_get_strings(struct net_device *netdev, u32 stringset, |
|
1807 u8 *data) |
|
1808 { |
|
1809 u8 *p = data; |
|
1810 int i; |
|
1811 |
|
1812 switch (stringset) { |
|
1813 case ETH_SS_TEST: |
|
1814 memcpy(data, *e1000_gstrings_test, |
|
1815 sizeof(e1000_gstrings_test)); |
|
1816 break; |
|
1817 case ETH_SS_STATS: |
|
1818 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { |
|
1819 memcpy(p, e1000_gstrings_stats[i].stat_string, |
|
1820 ETH_GSTRING_LEN); |
|
1821 p += ETH_GSTRING_LEN; |
|
1822 } |
|
1823 /* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */ |
|
1824 break; |
|
1825 } |
|
1826 } |
|
1827 |
|
1828 static const struct ethtool_ops e1000_ethtool_ops = { |
|
1829 .get_settings = e1000_get_settings, |
|
1830 .set_settings = e1000_set_settings, |
|
1831 .get_drvinfo = e1000_get_drvinfo, |
|
1832 .get_regs_len = e1000_get_regs_len, |
|
1833 .get_regs = e1000_get_regs, |
|
1834 .get_wol = e1000_get_wol, |
|
1835 .set_wol = e1000_set_wol, |
|
1836 .get_msglevel = e1000_get_msglevel, |
|
1837 .set_msglevel = e1000_set_msglevel, |
|
1838 .nway_reset = e1000_nway_reset, |
|
1839 .get_link = e1000_get_link, |
|
1840 .get_eeprom_len = e1000_get_eeprom_len, |
|
1841 .get_eeprom = e1000_get_eeprom, |
|
1842 .set_eeprom = e1000_set_eeprom, |
|
1843 .get_ringparam = e1000_get_ringparam, |
|
1844 .set_ringparam = e1000_set_ringparam, |
|
1845 .get_pauseparam = e1000_get_pauseparam, |
|
1846 .set_pauseparam = e1000_set_pauseparam, |
|
1847 .self_test = e1000_diag_test, |
|
1848 .get_strings = e1000_get_strings, |
|
1849 .set_phys_id = e1000_set_phys_id, |
|
1850 .get_ethtool_stats = e1000_get_ethtool_stats, |
|
1851 .get_sset_count = e1000_get_sset_count, |
|
1852 .get_coalesce = e1000_get_coalesce, |
|
1853 .set_coalesce = e1000_set_coalesce, |
|
1854 .get_ts_info = ethtool_op_get_ts_info, |
|
1855 }; |
|
1856 |
|
1857 void e1000_set_ethtool_ops(struct net_device *netdev) |
|
1858 { |
|
1859 SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); |
|
1860 } |