|
1 /******************************************************************************* |
|
2 |
|
3 Intel PRO/100 Linux driver |
|
4 Copyright(c) 1999 - 2006 Intel Corporation. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms and conditions of the GNU General Public License, |
|
8 version 2, as published by the Free Software Foundation. |
|
9 |
|
10 This program is distributed in the hope it will be useful, but WITHOUT |
|
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
13 more details. |
|
14 |
|
15 You should have received a copy of the GNU General Public License along with |
|
16 this program; if not, write to the Free Software Foundation, Inc., |
|
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
|
18 |
|
19 The full GNU General Public License is included in this distribution in |
|
20 the file called "COPYING". |
|
21 |
|
22 Contact Information: |
|
23 Linux NICS <linux.nics@intel.com> |
|
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
26 |
|
27 *******************************************************************************/ |
|
28 |
|
29 /* |
|
30 * e100.c: Intel(R) PRO/100 ethernet driver |
|
31 * |
|
32 * (Re)written 2003 by scott.feldman@intel.com. Based loosely on |
|
33 * original e100 driver, but better described as a munging of |
|
34 * e100, e1000, eepro100, tg3, 8139cp, and other drivers. |
|
35 * |
|
36 * References: |
|
37 * Intel 8255x 10/100 Mbps Ethernet Controller Family, |
|
38 * Open Source Software Developers Manual, |
|
39 * http://sourceforge.net/projects/e1000 |
|
40 * |
|
41 * |
|
42 * Theory of Operation |
|
43 * |
|
44 * I. General |
|
45 * |
|
46 * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet |
|
47 * controller family, which includes the 82557, 82558, 82559, 82550, |
|
48 * 82551, and 82562 devices. 82558 and greater controllers |
|
49 * integrate the Intel 82555 PHY. The controllers are used in |
|
50 * server and client network interface cards, as well as in |
|
51 * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx |
|
52 * configurations. 8255x supports a 32-bit linear addressing |
|
53 * mode and operates at 33Mhz PCI clock rate. |
|
54 * |
|
55 * II. Driver Operation |
|
56 * |
|
57 * Memory-mapped mode is used exclusively to access the device's |
|
58 * shared-memory structure, the Control/Status Registers (CSR). All |
|
59 * setup, configuration, and control of the device, including queuing |
|
60 * of Tx, Rx, and configuration commands is through the CSR. |
|
61 * cmd_lock serializes accesses to the CSR command register. cb_lock |
|
62 * protects the shared Command Block List (CBL). |
|
63 * |
|
64 * 8255x is highly MII-compliant and all access to the PHY go |
|
65 * through the Management Data Interface (MDI). Consequently, the |
|
66 * driver leverages the mii.c library shared with other MII-compliant |
|
67 * devices. |
|
68 * |
|
69 * Big- and Little-Endian byte order as well as 32- and 64-bit |
|
70 * archs are supported. Weak-ordered memory and non-cache-coherent |
|
71 * archs are supported. |
|
72 * |
|
73 * III. Transmit |
|
74 * |
|
75 * A Tx skb is mapped and hangs off of a TCB. TCBs are linked |
|
76 * together in a fixed-size ring (CBL) thus forming the flexible mode |
|
77 * memory structure. A TCB marked with the suspend-bit indicates |
|
78 * the end of the ring. The last TCB processed suspends the |
|
79 * controller, and the controller can be restarted by issue a CU |
|
80 * resume command to continue from the suspend point, or a CU start |
|
81 * command to start at a given position in the ring. |
|
82 * |
|
83 * Non-Tx commands (config, multicast setup, etc) are linked |
|
84 * into the CBL ring along with Tx commands. The common structure |
|
85 * used for both Tx and non-Tx commands is the Command Block (CB). |
|
86 * |
|
87 * cb_to_use is the next CB to use for queuing a command; cb_to_clean |
|
88 * is the next CB to check for completion; cb_to_send is the first |
|
89 * CB to start on in case of a previous failure to resume. CB clean |
|
90 * up happens in interrupt context in response to a CU interrupt. |
|
91 * cbs_avail keeps track of number of free CB resources available. |
|
92 * |
|
93 * Hardware padding of short packets to minimum packet size is |
|
94 * enabled. 82557 pads with 7Eh, while the later controllers pad |
|
95 * with 00h. |
|
96 * |
|
97 * IV. Receive |
|
98 * |
|
99 * The Receive Frame Area (RFA) comprises a ring of Receive Frame |
|
100 * Descriptors (RFD) + data buffer, thus forming the simplified mode |
|
101 * memory structure. Rx skbs are allocated to contain both the RFD |
|
102 * and the data buffer, but the RFD is pulled off before the skb is |
|
103 * indicated. The data buffer is aligned such that encapsulated |
|
104 * protocol headers are u32-aligned. Since the RFD is part of the |
|
105 * mapped shared memory, and completion status is contained within |
|
106 * the RFD, the RFD must be dma_sync'ed to maintain a consistent |
|
107 * view from software and hardware. |
|
108 * |
|
109 * In order to keep updates to the RFD link field from colliding with |
|
110 * hardware writes to mark packets complete, we use the feature that |
|
111 * hardware will not write to a size 0 descriptor and mark the previous |
|
112 * packet as end-of-list (EL). After updating the link, we remove EL |
|
113 * and only then restore the size such that hardware may use the |
|
114 * previous-to-end RFD. |
|
115 * |
|
116 * Under typical operation, the receive unit (RU) is start once, |
|
117 * and the controller happily fills RFDs as frames arrive. If |
|
118 * replacement RFDs cannot be allocated, or the RU goes non-active, |
|
119 * the RU must be restarted. Frame arrival generates an interrupt, |
|
120 * and Rx indication and re-allocation happen in the same context, |
|
121 * therefore no locking is required. A software-generated interrupt |
|
122 * is generated from the watchdog to recover from a failed allocation |
|
123 * scenario where all Rx resources have been indicated and none re- |
|
124 * placed. |
|
125 * |
|
126 * V. Miscellaneous |
|
127 * |
|
128 * VLAN offloading of tagging, stripping and filtering is not |
|
129 * supported, but driver will accommodate the extra 4-byte VLAN tag |
|
130 * for processing by upper layers. Tx/Rx Checksum offloading is not |
|
131 * supported. Tx Scatter/Gather is not supported. Jumbo Frames is |
|
132 * not supported (hardware limitation). |
|
133 * |
|
134 * MagicPacket(tm) WoL support is enabled/disabled via ethtool. |
|
135 * |
|
136 * Thanks to JC (jchapman@katalix.com) for helping with |
|
137 * testing/troubleshooting the development driver. |
|
138 * |
|
139 * TODO: |
|
140 * o several entry points race with dev->close |
|
141 * o check for tx-no-resources/stop Q races with tx clean/wake Q |
|
142 * |
|
143 * FIXES: |
|
144 * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com> |
|
145 * - Stratus87247: protect MDI control register manipulations |
|
146 * 2009/06/01 - Andreas Mohr <andi at lisas dot de> |
|
147 * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs |
|
148 */ |
|
149 |
|
150 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
|
151 |
|
152 #include <linux/hardirq.h> |
|
153 #include <linux/interrupt.h> |
|
154 #include <linux/module.h> |
|
155 #include <linux/moduleparam.h> |
|
156 #include <linux/kernel.h> |
|
157 #include <linux/types.h> |
|
158 #include <linux/sched.h> |
|
159 #include <linux/slab.h> |
|
160 #include <linux/delay.h> |
|
161 #include <linux/init.h> |
|
162 #include <linux/pci.h> |
|
163 #include <linux/dma-mapping.h> |
|
164 #include <linux/dmapool.h> |
|
165 #include <linux/netdevice.h> |
|
166 #include <linux/etherdevice.h> |
|
167 #include <linux/mii.h> |
|
168 #include <linux/if_vlan.h> |
|
169 #include <linux/skbuff.h> |
|
170 #include <linux/ethtool.h> |
|
171 #include <linux/string.h> |
|
172 #include <linux/firmware.h> |
|
173 #include <linux/rtnetlink.h> |
|
174 #include <asm/unaligned.h> |
|
175 |
|
176 |
|
177 #define DRV_NAME "e100" |
|
178 #define DRV_EXT "-NAPI" |
|
179 #define DRV_VERSION "3.5.24-k2"DRV_EXT |
|
180 #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" |
|
181 #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" |
|
182 |
|
183 #define E100_WATCHDOG_PERIOD (2 * HZ) |
|
184 #define E100_NAPI_WEIGHT 16 |
|
185 |
|
186 #define FIRMWARE_D101M "e100/d101m_ucode.bin" |
|
187 #define FIRMWARE_D101S "e100/d101s_ucode.bin" |
|
188 #define FIRMWARE_D102E "e100/d102e_ucode.bin" |
|
189 |
|
190 MODULE_DESCRIPTION(DRV_DESCRIPTION); |
|
191 MODULE_AUTHOR(DRV_COPYRIGHT); |
|
192 MODULE_LICENSE("GPL"); |
|
193 MODULE_VERSION(DRV_VERSION); |
|
194 MODULE_FIRMWARE(FIRMWARE_D101M); |
|
195 MODULE_FIRMWARE(FIRMWARE_D101S); |
|
196 MODULE_FIRMWARE(FIRMWARE_D102E); |
|
197 |
|
198 static int debug = 3; |
|
199 static int eeprom_bad_csum_allow = 0; |
|
200 static int use_io = 0; |
|
201 module_param(debug, int, 0); |
|
202 module_param(eeprom_bad_csum_allow, int, 0); |
|
203 module_param(use_io, int, 0); |
|
204 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
|
205 MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); |
|
206 MODULE_PARM_DESC(use_io, "Force use of i/o access mode"); |
|
207 |
|
208 #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\ |
|
209 PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \ |
|
210 PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich } |
|
211 static DEFINE_PCI_DEVICE_TABLE(e100_id_table) = { |
|
212 INTEL_8255X_ETHERNET_DEVICE(0x1029, 0), |
|
213 INTEL_8255X_ETHERNET_DEVICE(0x1030, 0), |
|
214 INTEL_8255X_ETHERNET_DEVICE(0x1031, 3), |
|
215 INTEL_8255X_ETHERNET_DEVICE(0x1032, 3), |
|
216 INTEL_8255X_ETHERNET_DEVICE(0x1033, 3), |
|
217 INTEL_8255X_ETHERNET_DEVICE(0x1034, 3), |
|
218 INTEL_8255X_ETHERNET_DEVICE(0x1038, 3), |
|
219 INTEL_8255X_ETHERNET_DEVICE(0x1039, 4), |
|
220 INTEL_8255X_ETHERNET_DEVICE(0x103A, 4), |
|
221 INTEL_8255X_ETHERNET_DEVICE(0x103B, 4), |
|
222 INTEL_8255X_ETHERNET_DEVICE(0x103C, 4), |
|
223 INTEL_8255X_ETHERNET_DEVICE(0x103D, 4), |
|
224 INTEL_8255X_ETHERNET_DEVICE(0x103E, 4), |
|
225 INTEL_8255X_ETHERNET_DEVICE(0x1050, 5), |
|
226 INTEL_8255X_ETHERNET_DEVICE(0x1051, 5), |
|
227 INTEL_8255X_ETHERNET_DEVICE(0x1052, 5), |
|
228 INTEL_8255X_ETHERNET_DEVICE(0x1053, 5), |
|
229 INTEL_8255X_ETHERNET_DEVICE(0x1054, 5), |
|
230 INTEL_8255X_ETHERNET_DEVICE(0x1055, 5), |
|
231 INTEL_8255X_ETHERNET_DEVICE(0x1056, 5), |
|
232 INTEL_8255X_ETHERNET_DEVICE(0x1057, 5), |
|
233 INTEL_8255X_ETHERNET_DEVICE(0x1059, 0), |
|
234 INTEL_8255X_ETHERNET_DEVICE(0x1064, 6), |
|
235 INTEL_8255X_ETHERNET_DEVICE(0x1065, 6), |
|
236 INTEL_8255X_ETHERNET_DEVICE(0x1066, 6), |
|
237 INTEL_8255X_ETHERNET_DEVICE(0x1067, 6), |
|
238 INTEL_8255X_ETHERNET_DEVICE(0x1068, 6), |
|
239 INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), |
|
240 INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), |
|
241 INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), |
|
242 INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), |
|
243 INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), |
|
244 INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), |
|
245 INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), |
|
246 INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), |
|
247 INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7), |
|
248 INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), |
|
249 INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), |
|
250 INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), |
|
251 INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), |
|
252 INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), |
|
253 INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), |
|
254 { 0, } |
|
255 }; |
|
256 MODULE_DEVICE_TABLE(pci, e100_id_table); |
|
257 |
|
258 enum mac { |
|
259 mac_82557_D100_A = 0, |
|
260 mac_82557_D100_B = 1, |
|
261 mac_82557_D100_C = 2, |
|
262 mac_82558_D101_A4 = 4, |
|
263 mac_82558_D101_B0 = 5, |
|
264 mac_82559_D101M = 8, |
|
265 mac_82559_D101S = 9, |
|
266 mac_82550_D102 = 12, |
|
267 mac_82550_D102_C = 13, |
|
268 mac_82551_E = 14, |
|
269 mac_82551_F = 15, |
|
270 mac_82551_10 = 16, |
|
271 mac_unknown = 0xFF, |
|
272 }; |
|
273 |
|
274 enum phy { |
|
275 phy_100a = 0x000003E0, |
|
276 phy_100c = 0x035002A8, |
|
277 phy_82555_tx = 0x015002A8, |
|
278 phy_nsc_tx = 0x5C002000, |
|
279 phy_82562_et = 0x033002A8, |
|
280 phy_82562_em = 0x032002A8, |
|
281 phy_82562_ek = 0x031002A8, |
|
282 phy_82562_eh = 0x017002A8, |
|
283 phy_82552_v = 0xd061004d, |
|
284 phy_unknown = 0xFFFFFFFF, |
|
285 }; |
|
286 |
|
287 /* CSR (Control/Status Registers) */ |
|
288 struct csr { |
|
289 struct { |
|
290 u8 status; |
|
291 u8 stat_ack; |
|
292 u8 cmd_lo; |
|
293 u8 cmd_hi; |
|
294 u32 gen_ptr; |
|
295 } scb; |
|
296 u32 port; |
|
297 u16 flash_ctrl; |
|
298 u8 eeprom_ctrl_lo; |
|
299 u8 eeprom_ctrl_hi; |
|
300 u32 mdi_ctrl; |
|
301 u32 rx_dma_count; |
|
302 }; |
|
303 |
|
304 enum scb_status { |
|
305 rus_no_res = 0x08, |
|
306 rus_ready = 0x10, |
|
307 rus_mask = 0x3C, |
|
308 }; |
|
309 |
|
310 enum ru_state { |
|
311 RU_SUSPENDED = 0, |
|
312 RU_RUNNING = 1, |
|
313 RU_UNINITIALIZED = -1, |
|
314 }; |
|
315 |
|
316 enum scb_stat_ack { |
|
317 stat_ack_not_ours = 0x00, |
|
318 stat_ack_sw_gen = 0x04, |
|
319 stat_ack_rnr = 0x10, |
|
320 stat_ack_cu_idle = 0x20, |
|
321 stat_ack_frame_rx = 0x40, |
|
322 stat_ack_cu_cmd_done = 0x80, |
|
323 stat_ack_not_present = 0xFF, |
|
324 stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx), |
|
325 stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done), |
|
326 }; |
|
327 |
|
328 enum scb_cmd_hi { |
|
329 irq_mask_none = 0x00, |
|
330 irq_mask_all = 0x01, |
|
331 irq_sw_gen = 0x02, |
|
332 }; |
|
333 |
|
334 enum scb_cmd_lo { |
|
335 cuc_nop = 0x00, |
|
336 ruc_start = 0x01, |
|
337 ruc_load_base = 0x06, |
|
338 cuc_start = 0x10, |
|
339 cuc_resume = 0x20, |
|
340 cuc_dump_addr = 0x40, |
|
341 cuc_dump_stats = 0x50, |
|
342 cuc_load_base = 0x60, |
|
343 cuc_dump_reset = 0x70, |
|
344 }; |
|
345 |
|
346 enum cuc_dump { |
|
347 cuc_dump_complete = 0x0000A005, |
|
348 cuc_dump_reset_complete = 0x0000A007, |
|
349 }; |
|
350 |
|
351 enum port { |
|
352 software_reset = 0x0000, |
|
353 selftest = 0x0001, |
|
354 selective_reset = 0x0002, |
|
355 }; |
|
356 |
|
357 enum eeprom_ctrl_lo { |
|
358 eesk = 0x01, |
|
359 eecs = 0x02, |
|
360 eedi = 0x04, |
|
361 eedo = 0x08, |
|
362 }; |
|
363 |
|
364 enum mdi_ctrl { |
|
365 mdi_write = 0x04000000, |
|
366 mdi_read = 0x08000000, |
|
367 mdi_ready = 0x10000000, |
|
368 }; |
|
369 |
|
370 enum eeprom_op { |
|
371 op_write = 0x05, |
|
372 op_read = 0x06, |
|
373 op_ewds = 0x10, |
|
374 op_ewen = 0x13, |
|
375 }; |
|
376 |
|
377 enum eeprom_offsets { |
|
378 eeprom_cnfg_mdix = 0x03, |
|
379 eeprom_phy_iface = 0x06, |
|
380 eeprom_id = 0x0A, |
|
381 eeprom_config_asf = 0x0D, |
|
382 eeprom_smbus_addr = 0x90, |
|
383 }; |
|
384 |
|
385 enum eeprom_cnfg_mdix { |
|
386 eeprom_mdix_enabled = 0x0080, |
|
387 }; |
|
388 |
|
389 enum eeprom_phy_iface { |
|
390 NoSuchPhy = 0, |
|
391 I82553AB, |
|
392 I82553C, |
|
393 I82503, |
|
394 DP83840, |
|
395 S80C240, |
|
396 S80C24, |
|
397 I82555, |
|
398 DP83840A = 10, |
|
399 }; |
|
400 |
|
401 enum eeprom_id { |
|
402 eeprom_id_wol = 0x0020, |
|
403 }; |
|
404 |
|
405 enum eeprom_config_asf { |
|
406 eeprom_asf = 0x8000, |
|
407 eeprom_gcl = 0x4000, |
|
408 }; |
|
409 |
|
410 enum cb_status { |
|
411 cb_complete = 0x8000, |
|
412 cb_ok = 0x2000, |
|
413 }; |
|
414 |
|
415 /** |
|
416 * cb_command - Command Block flags |
|
417 * @cb_tx_nc: 0: controler does CRC (normal), 1: CRC from skb memory |
|
418 */ |
|
419 enum cb_command { |
|
420 cb_nop = 0x0000, |
|
421 cb_iaaddr = 0x0001, |
|
422 cb_config = 0x0002, |
|
423 cb_multi = 0x0003, |
|
424 cb_tx = 0x0004, |
|
425 cb_ucode = 0x0005, |
|
426 cb_dump = 0x0006, |
|
427 cb_tx_sf = 0x0008, |
|
428 cb_tx_nc = 0x0010, |
|
429 cb_cid = 0x1f00, |
|
430 cb_i = 0x2000, |
|
431 cb_s = 0x4000, |
|
432 cb_el = 0x8000, |
|
433 }; |
|
434 |
|
435 struct rfd { |
|
436 __le16 status; |
|
437 __le16 command; |
|
438 __le32 link; |
|
439 __le32 rbd; |
|
440 __le16 actual_size; |
|
441 __le16 size; |
|
442 }; |
|
443 |
|
444 struct rx { |
|
445 struct rx *next, *prev; |
|
446 struct sk_buff *skb; |
|
447 dma_addr_t dma_addr; |
|
448 }; |
|
449 |
|
450 #if defined(__BIG_ENDIAN_BITFIELD) |
|
451 #define X(a,b) b,a |
|
452 #else |
|
453 #define X(a,b) a,b |
|
454 #endif |
|
455 struct config { |
|
456 /*0*/ u8 X(byte_count:6, pad0:2); |
|
457 /*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1); |
|
458 /*2*/ u8 adaptive_ifs; |
|
459 /*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1), |
|
460 term_write_cache_line:1), pad3:4); |
|
461 /*4*/ u8 X(rx_dma_max_count:7, pad4:1); |
|
462 /*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1); |
|
463 /*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1), |
|
464 tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1), |
|
465 rx_save_overruns : 1), rx_save_bad_frames : 1); |
|
466 /*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2), |
|
467 pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1), |
|
468 tx_dynamic_tbd:1); |
|
469 /*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1); |
|
470 /*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1), |
|
471 link_status_wake:1), arp_wake:1), mcmatch_wake:1); |
|
472 /*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2), |
|
473 loopback:2); |
|
474 /*11*/ u8 X(linear_priority:3, pad11:5); |
|
475 /*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4); |
|
476 /*13*/ u8 ip_addr_lo; |
|
477 /*14*/ u8 ip_addr_hi; |
|
478 /*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1), |
|
479 wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1), |
|
480 pad15_2:1), crs_or_cdt:1); |
|
481 /*16*/ u8 fc_delay_lo; |
|
482 /*17*/ u8 fc_delay_hi; |
|
483 /*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1), |
|
484 rx_long_ok:1), fc_priority_threshold:3), pad18:1); |
|
485 /*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1), |
|
486 fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1), |
|
487 full_duplex_force:1), full_duplex_pin:1); |
|
488 /*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1); |
|
489 /*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4); |
|
490 /*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6); |
|
491 u8 pad_d102[9]; |
|
492 }; |
|
493 |
|
494 #define E100_MAX_MULTICAST_ADDRS 64 |
|
495 struct multi { |
|
496 __le16 count; |
|
497 u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/]; |
|
498 }; |
|
499 |
|
500 /* Important: keep total struct u32-aligned */ |
|
501 #define UCODE_SIZE 134 |
|
502 struct cb { |
|
503 __le16 status; |
|
504 __le16 command; |
|
505 __le32 link; |
|
506 union { |
|
507 u8 iaaddr[ETH_ALEN]; |
|
508 __le32 ucode[UCODE_SIZE]; |
|
509 struct config config; |
|
510 struct multi multi; |
|
511 struct { |
|
512 u32 tbd_array; |
|
513 u16 tcb_byte_count; |
|
514 u8 threshold; |
|
515 u8 tbd_count; |
|
516 struct { |
|
517 __le32 buf_addr; |
|
518 __le16 size; |
|
519 u16 eol; |
|
520 } tbd; |
|
521 } tcb; |
|
522 __le32 dump_buffer_addr; |
|
523 } u; |
|
524 struct cb *next, *prev; |
|
525 dma_addr_t dma_addr; |
|
526 struct sk_buff *skb; |
|
527 }; |
|
528 |
|
529 enum loopback { |
|
530 lb_none = 0, lb_mac = 1, lb_phy = 3, |
|
531 }; |
|
532 |
|
533 struct stats { |
|
534 __le32 tx_good_frames, tx_max_collisions, tx_late_collisions, |
|
535 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions, |
|
536 tx_multiple_collisions, tx_total_collisions; |
|
537 __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors, |
|
538 rx_resource_errors, rx_overrun_errors, rx_cdt_errors, |
|
539 rx_short_frame_errors; |
|
540 __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported; |
|
541 __le16 xmt_tco_frames, rcv_tco_frames; |
|
542 __le32 complete; |
|
543 }; |
|
544 |
|
545 struct mem { |
|
546 struct { |
|
547 u32 signature; |
|
548 u32 result; |
|
549 } selftest; |
|
550 struct stats stats; |
|
551 u8 dump_buf[596]; |
|
552 }; |
|
553 |
|
554 struct param_range { |
|
555 u32 min; |
|
556 u32 max; |
|
557 u32 count; |
|
558 }; |
|
559 |
|
560 struct params { |
|
561 struct param_range rfds; |
|
562 struct param_range cbs; |
|
563 }; |
|
564 |
|
565 struct nic { |
|
566 /* Begin: frequently used values: keep adjacent for cache effect */ |
|
567 u32 msg_enable ____cacheline_aligned; |
|
568 struct net_device *netdev; |
|
569 struct pci_dev *pdev; |
|
570 u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data); |
|
571 |
|
572 struct rx *rxs ____cacheline_aligned; |
|
573 struct rx *rx_to_use; |
|
574 struct rx *rx_to_clean; |
|
575 struct rfd blank_rfd; |
|
576 enum ru_state ru_running; |
|
577 |
|
578 spinlock_t cb_lock ____cacheline_aligned; |
|
579 spinlock_t cmd_lock; |
|
580 struct csr __iomem *csr; |
|
581 enum scb_cmd_lo cuc_cmd; |
|
582 unsigned int cbs_avail; |
|
583 struct napi_struct napi; |
|
584 struct cb *cbs; |
|
585 struct cb *cb_to_use; |
|
586 struct cb *cb_to_send; |
|
587 struct cb *cb_to_clean; |
|
588 __le16 tx_command; |
|
589 /* End: frequently used values: keep adjacent for cache effect */ |
|
590 |
|
591 enum { |
|
592 ich = (1 << 0), |
|
593 promiscuous = (1 << 1), |
|
594 multicast_all = (1 << 2), |
|
595 wol_magic = (1 << 3), |
|
596 ich_10h_workaround = (1 << 4), |
|
597 } flags ____cacheline_aligned; |
|
598 |
|
599 enum mac mac; |
|
600 enum phy phy; |
|
601 struct params params; |
|
602 struct timer_list watchdog; |
|
603 struct mii_if_info mii; |
|
604 struct work_struct tx_timeout_task; |
|
605 enum loopback loopback; |
|
606 |
|
607 struct mem *mem; |
|
608 dma_addr_t dma_addr; |
|
609 |
|
610 struct pci_pool *cbs_pool; |
|
611 dma_addr_t cbs_dma_addr; |
|
612 u8 adaptive_ifs; |
|
613 u8 tx_threshold; |
|
614 u32 tx_frames; |
|
615 u32 tx_collisions; |
|
616 u32 tx_deferred; |
|
617 u32 tx_single_collisions; |
|
618 u32 tx_multiple_collisions; |
|
619 u32 tx_fc_pause; |
|
620 u32 tx_tco_frames; |
|
621 |
|
622 u32 rx_fc_pause; |
|
623 u32 rx_fc_unsupported; |
|
624 u32 rx_tco_frames; |
|
625 u32 rx_short_frame_errors; |
|
626 u32 rx_over_length_errors; |
|
627 |
|
628 u16 eeprom_wc; |
|
629 __le16 eeprom[256]; |
|
630 spinlock_t mdio_lock; |
|
631 const struct firmware *fw; |
|
632 }; |
|
633 |
|
634 static inline void e100_write_flush(struct nic *nic) |
|
635 { |
|
636 /* Flush previous PCI writes through intermediate bridges |
|
637 * by doing a benign read */ |
|
638 (void)ioread8(&nic->csr->scb.status); |
|
639 } |
|
640 |
|
641 static void e100_enable_irq(struct nic *nic) |
|
642 { |
|
643 unsigned long flags; |
|
644 |
|
645 spin_lock_irqsave(&nic->cmd_lock, flags); |
|
646 iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi); |
|
647 e100_write_flush(nic); |
|
648 spin_unlock_irqrestore(&nic->cmd_lock, flags); |
|
649 } |
|
650 |
|
651 static void e100_disable_irq(struct nic *nic) |
|
652 { |
|
653 unsigned long flags; |
|
654 |
|
655 spin_lock_irqsave(&nic->cmd_lock, flags); |
|
656 iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi); |
|
657 e100_write_flush(nic); |
|
658 spin_unlock_irqrestore(&nic->cmd_lock, flags); |
|
659 } |
|
660 |
|
661 static void e100_hw_reset(struct nic *nic) |
|
662 { |
|
663 /* Put CU and RU into idle with a selective reset to get |
|
664 * device off of PCI bus */ |
|
665 iowrite32(selective_reset, &nic->csr->port); |
|
666 e100_write_flush(nic); udelay(20); |
|
667 |
|
668 /* Now fully reset device */ |
|
669 iowrite32(software_reset, &nic->csr->port); |
|
670 e100_write_flush(nic); udelay(20); |
|
671 |
|
672 /* Mask off our interrupt line - it's unmasked after reset */ |
|
673 e100_disable_irq(nic); |
|
674 } |
|
675 |
|
676 static int e100_self_test(struct nic *nic) |
|
677 { |
|
678 u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest); |
|
679 |
|
680 /* Passing the self-test is a pretty good indication |
|
681 * that the device can DMA to/from host memory */ |
|
682 |
|
683 nic->mem->selftest.signature = 0; |
|
684 nic->mem->selftest.result = 0xFFFFFFFF; |
|
685 |
|
686 iowrite32(selftest | dma_addr, &nic->csr->port); |
|
687 e100_write_flush(nic); |
|
688 /* Wait 10 msec for self-test to complete */ |
|
689 msleep(10); |
|
690 |
|
691 /* Interrupts are enabled after self-test */ |
|
692 e100_disable_irq(nic); |
|
693 |
|
694 /* Check results of self-test */ |
|
695 if (nic->mem->selftest.result != 0) { |
|
696 netif_err(nic, hw, nic->netdev, |
|
697 "Self-test failed: result=0x%08X\n", |
|
698 nic->mem->selftest.result); |
|
699 return -ETIMEDOUT; |
|
700 } |
|
701 if (nic->mem->selftest.signature == 0) { |
|
702 netif_err(nic, hw, nic->netdev, "Self-test failed: timed out\n"); |
|
703 return -ETIMEDOUT; |
|
704 } |
|
705 |
|
706 return 0; |
|
707 } |
|
708 |
|
709 static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data) |
|
710 { |
|
711 u32 cmd_addr_data[3]; |
|
712 u8 ctrl; |
|
713 int i, j; |
|
714 |
|
715 /* Three cmds: write/erase enable, write data, write/erase disable */ |
|
716 cmd_addr_data[0] = op_ewen << (addr_len - 2); |
|
717 cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) | |
|
718 le16_to_cpu(data); |
|
719 cmd_addr_data[2] = op_ewds << (addr_len - 2); |
|
720 |
|
721 /* Bit-bang cmds to write word to eeprom */ |
|
722 for (j = 0; j < 3; j++) { |
|
723 |
|
724 /* Chip select */ |
|
725 iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo); |
|
726 e100_write_flush(nic); udelay(4); |
|
727 |
|
728 for (i = 31; i >= 0; i--) { |
|
729 ctrl = (cmd_addr_data[j] & (1 << i)) ? |
|
730 eecs | eedi : eecs; |
|
731 iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo); |
|
732 e100_write_flush(nic); udelay(4); |
|
733 |
|
734 iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); |
|
735 e100_write_flush(nic); udelay(4); |
|
736 } |
|
737 /* Wait 10 msec for cmd to complete */ |
|
738 msleep(10); |
|
739 |
|
740 /* Chip deselect */ |
|
741 iowrite8(0, &nic->csr->eeprom_ctrl_lo); |
|
742 e100_write_flush(nic); udelay(4); |
|
743 } |
|
744 }; |
|
745 |
|
746 /* General technique stolen from the eepro100 driver - very clever */ |
|
747 static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr) |
|
748 { |
|
749 u32 cmd_addr_data; |
|
750 u16 data = 0; |
|
751 u8 ctrl; |
|
752 int i; |
|
753 |
|
754 cmd_addr_data = ((op_read << *addr_len) | addr) << 16; |
|
755 |
|
756 /* Chip select */ |
|
757 iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo); |
|
758 e100_write_flush(nic); udelay(4); |
|
759 |
|
760 /* Bit-bang to read word from eeprom */ |
|
761 for (i = 31; i >= 0; i--) { |
|
762 ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs; |
|
763 iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo); |
|
764 e100_write_flush(nic); udelay(4); |
|
765 |
|
766 iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); |
|
767 e100_write_flush(nic); udelay(4); |
|
768 |
|
769 /* Eeprom drives a dummy zero to EEDO after receiving |
|
770 * complete address. Use this to adjust addr_len. */ |
|
771 ctrl = ioread8(&nic->csr->eeprom_ctrl_lo); |
|
772 if (!(ctrl & eedo) && i > 16) { |
|
773 *addr_len -= (i - 16); |
|
774 i = 17; |
|
775 } |
|
776 |
|
777 data = (data << 1) | (ctrl & eedo ? 1 : 0); |
|
778 } |
|
779 |
|
780 /* Chip deselect */ |
|
781 iowrite8(0, &nic->csr->eeprom_ctrl_lo); |
|
782 e100_write_flush(nic); udelay(4); |
|
783 |
|
784 return cpu_to_le16(data); |
|
785 }; |
|
786 |
|
787 /* Load entire EEPROM image into driver cache and validate checksum */ |
|
788 static int e100_eeprom_load(struct nic *nic) |
|
789 { |
|
790 u16 addr, addr_len = 8, checksum = 0; |
|
791 |
|
792 /* Try reading with an 8-bit addr len to discover actual addr len */ |
|
793 e100_eeprom_read(nic, &addr_len, 0); |
|
794 nic->eeprom_wc = 1 << addr_len; |
|
795 |
|
796 for (addr = 0; addr < nic->eeprom_wc; addr++) { |
|
797 nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr); |
|
798 if (addr < nic->eeprom_wc - 1) |
|
799 checksum += le16_to_cpu(nic->eeprom[addr]); |
|
800 } |
|
801 |
|
802 /* The checksum, stored in the last word, is calculated such that |
|
803 * the sum of words should be 0xBABA */ |
|
804 if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) { |
|
805 netif_err(nic, probe, nic->netdev, "EEPROM corrupted\n"); |
|
806 if (!eeprom_bad_csum_allow) |
|
807 return -EAGAIN; |
|
808 } |
|
809 |
|
810 return 0; |
|
811 } |
|
812 |
|
813 /* Save (portion of) driver EEPROM cache to device and update checksum */ |
|
814 static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) |
|
815 { |
|
816 u16 addr, addr_len = 8, checksum = 0; |
|
817 |
|
818 /* Try reading with an 8-bit addr len to discover actual addr len */ |
|
819 e100_eeprom_read(nic, &addr_len, 0); |
|
820 nic->eeprom_wc = 1 << addr_len; |
|
821 |
|
822 if (start + count >= nic->eeprom_wc) |
|
823 return -EINVAL; |
|
824 |
|
825 for (addr = start; addr < start + count; addr++) |
|
826 e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]); |
|
827 |
|
828 /* The checksum, stored in the last word, is calculated such that |
|
829 * the sum of words should be 0xBABA */ |
|
830 for (addr = 0; addr < nic->eeprom_wc - 1; addr++) |
|
831 checksum += le16_to_cpu(nic->eeprom[addr]); |
|
832 nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum); |
|
833 e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1, |
|
834 nic->eeprom[nic->eeprom_wc - 1]); |
|
835 |
|
836 return 0; |
|
837 } |
|
838 |
|
839 #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ |
|
840 #define E100_WAIT_SCB_FAST 20 /* delay like the old code */ |
|
841 static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) |
|
842 { |
|
843 unsigned long flags; |
|
844 unsigned int i; |
|
845 int err = 0; |
|
846 |
|
847 spin_lock_irqsave(&nic->cmd_lock, flags); |
|
848 |
|
849 /* Previous command is accepted when SCB clears */ |
|
850 for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) { |
|
851 if (likely(!ioread8(&nic->csr->scb.cmd_lo))) |
|
852 break; |
|
853 cpu_relax(); |
|
854 if (unlikely(i > E100_WAIT_SCB_FAST)) |
|
855 udelay(5); |
|
856 } |
|
857 if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) { |
|
858 err = -EAGAIN; |
|
859 goto err_unlock; |
|
860 } |
|
861 |
|
862 if (unlikely(cmd != cuc_resume)) |
|
863 iowrite32(dma_addr, &nic->csr->scb.gen_ptr); |
|
864 iowrite8(cmd, &nic->csr->scb.cmd_lo); |
|
865 |
|
866 err_unlock: |
|
867 spin_unlock_irqrestore(&nic->cmd_lock, flags); |
|
868 |
|
869 return err; |
|
870 } |
|
871 |
|
872 static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, |
|
873 void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) |
|
874 { |
|
875 struct cb *cb; |
|
876 unsigned long flags; |
|
877 int err = 0; |
|
878 |
|
879 spin_lock_irqsave(&nic->cb_lock, flags); |
|
880 |
|
881 if (unlikely(!nic->cbs_avail)) { |
|
882 err = -ENOMEM; |
|
883 goto err_unlock; |
|
884 } |
|
885 |
|
886 cb = nic->cb_to_use; |
|
887 nic->cb_to_use = cb->next; |
|
888 nic->cbs_avail--; |
|
889 cb->skb = skb; |
|
890 |
|
891 if (unlikely(!nic->cbs_avail)) |
|
892 err = -ENOSPC; |
|
893 |
|
894 cb_prepare(nic, cb, skb); |
|
895 |
|
896 /* Order is important otherwise we'll be in a race with h/w: |
|
897 * set S-bit in current first, then clear S-bit in previous. */ |
|
898 cb->command |= cpu_to_le16(cb_s); |
|
899 wmb(); |
|
900 cb->prev->command &= cpu_to_le16(~cb_s); |
|
901 |
|
902 while (nic->cb_to_send != nic->cb_to_use) { |
|
903 if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd, |
|
904 nic->cb_to_send->dma_addr))) { |
|
905 /* Ok, here's where things get sticky. It's |
|
906 * possible that we can't schedule the command |
|
907 * because the controller is too busy, so |
|
908 * let's just queue the command and try again |
|
909 * when another command is scheduled. */ |
|
910 if (err == -ENOSPC) { |
|
911 //request a reset |
|
912 schedule_work(&nic->tx_timeout_task); |
|
913 } |
|
914 break; |
|
915 } else { |
|
916 nic->cuc_cmd = cuc_resume; |
|
917 nic->cb_to_send = nic->cb_to_send->next; |
|
918 } |
|
919 } |
|
920 |
|
921 err_unlock: |
|
922 spin_unlock_irqrestore(&nic->cb_lock, flags); |
|
923 |
|
924 return err; |
|
925 } |
|
926 |
|
927 static int mdio_read(struct net_device *netdev, int addr, int reg) |
|
928 { |
|
929 struct nic *nic = netdev_priv(netdev); |
|
930 return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0); |
|
931 } |
|
932 |
|
933 static void mdio_write(struct net_device *netdev, int addr, int reg, int data) |
|
934 { |
|
935 struct nic *nic = netdev_priv(netdev); |
|
936 |
|
937 nic->mdio_ctrl(nic, addr, mdi_write, reg, data); |
|
938 } |
|
939 |
|
940 /* the standard mdio_ctrl() function for usual MII-compliant hardware */ |
|
941 static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) |
|
942 { |
|
943 u32 data_out = 0; |
|
944 unsigned int i; |
|
945 unsigned long flags; |
|
946 |
|
947 |
|
948 /* |
|
949 * Stratus87247: we shouldn't be writing the MDI control |
|
950 * register until the Ready bit shows True. Also, since |
|
951 * manipulation of the MDI control registers is a multi-step |
|
952 * procedure it should be done under lock. |
|
953 */ |
|
954 spin_lock_irqsave(&nic->mdio_lock, flags); |
|
955 for (i = 100; i; --i) { |
|
956 if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready) |
|
957 break; |
|
958 udelay(20); |
|
959 } |
|
960 if (unlikely(!i)) { |
|
961 netdev_err(nic->netdev, "e100.mdio_ctrl won't go Ready\n"); |
|
962 spin_unlock_irqrestore(&nic->mdio_lock, flags); |
|
963 return 0; /* No way to indicate timeout error */ |
|
964 } |
|
965 iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl); |
|
966 |
|
967 for (i = 0; i < 100; i++) { |
|
968 udelay(20); |
|
969 if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready) |
|
970 break; |
|
971 } |
|
972 spin_unlock_irqrestore(&nic->mdio_lock, flags); |
|
973 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
974 "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n", |
|
975 dir == mdi_read ? "READ" : "WRITE", |
|
976 addr, reg, data, data_out); |
|
977 return (u16)data_out; |
|
978 } |
|
979 |
|
980 /* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */ |
|
981 static u16 mdio_ctrl_phy_82552_v(struct nic *nic, |
|
982 u32 addr, |
|
983 u32 dir, |
|
984 u32 reg, |
|
985 u16 data) |
|
986 { |
|
987 if ((reg == MII_BMCR) && (dir == mdi_write)) { |
|
988 if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) { |
|
989 u16 advert = mdio_read(nic->netdev, nic->mii.phy_id, |
|
990 MII_ADVERTISE); |
|
991 |
|
992 /* |
|
993 * Workaround Si issue where sometimes the part will not |
|
994 * autoneg to 100Mbps even when advertised. |
|
995 */ |
|
996 if (advert & ADVERTISE_100FULL) |
|
997 data |= BMCR_SPEED100 | BMCR_FULLDPLX; |
|
998 else if (advert & ADVERTISE_100HALF) |
|
999 data |= BMCR_SPEED100; |
|
1000 } |
|
1001 } |
|
1002 return mdio_ctrl_hw(nic, addr, dir, reg, data); |
|
1003 } |
|
1004 |
|
1005 /* Fully software-emulated mdio_ctrl() function for cards without |
|
1006 * MII-compliant PHYs. |
|
1007 * For now, this is mainly geared towards 80c24 support; in case of further |
|
1008 * requirements for other types (i82503, ...?) either extend this mechanism |
|
1009 * or split it, whichever is cleaner. |
|
1010 */ |
|
1011 static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic, |
|
1012 u32 addr, |
|
1013 u32 dir, |
|
1014 u32 reg, |
|
1015 u16 data) |
|
1016 { |
|
1017 /* might need to allocate a netdev_priv'ed register array eventually |
|
1018 * to be able to record state changes, but for now |
|
1019 * some fully hardcoded register handling ought to be ok I guess. */ |
|
1020 |
|
1021 if (dir == mdi_read) { |
|
1022 switch (reg) { |
|
1023 case MII_BMCR: |
|
1024 /* Auto-negotiation, right? */ |
|
1025 return BMCR_ANENABLE | |
|
1026 BMCR_FULLDPLX; |
|
1027 case MII_BMSR: |
|
1028 return BMSR_LSTATUS /* for mii_link_ok() */ | |
|
1029 BMSR_ANEGCAPABLE | |
|
1030 BMSR_10FULL; |
|
1031 case MII_ADVERTISE: |
|
1032 /* 80c24 is a "combo card" PHY, right? */ |
|
1033 return ADVERTISE_10HALF | |
|
1034 ADVERTISE_10FULL; |
|
1035 default: |
|
1036 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1037 "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", |
|
1038 dir == mdi_read ? "READ" : "WRITE", |
|
1039 addr, reg, data); |
|
1040 return 0xFFFF; |
|
1041 } |
|
1042 } else { |
|
1043 switch (reg) { |
|
1044 default: |
|
1045 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1046 "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", |
|
1047 dir == mdi_read ? "READ" : "WRITE", |
|
1048 addr, reg, data); |
|
1049 return 0xFFFF; |
|
1050 } |
|
1051 } |
|
1052 } |
|
1053 static inline int e100_phy_supports_mii(struct nic *nic) |
|
1054 { |
|
1055 /* for now, just check it by comparing whether we |
|
1056 are using MII software emulation. |
|
1057 */ |
|
1058 return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated); |
|
1059 } |
|
1060 |
|
1061 static void e100_get_defaults(struct nic *nic) |
|
1062 { |
|
1063 struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; |
|
1064 struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; |
|
1065 |
|
1066 /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ |
|
1067 nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision; |
|
1068 if (nic->mac == mac_unknown) |
|
1069 nic->mac = mac_82557_D100_A; |
|
1070 |
|
1071 nic->params.rfds = rfds; |
|
1072 nic->params.cbs = cbs; |
|
1073 |
|
1074 /* Quadwords to DMA into FIFO before starting frame transmit */ |
|
1075 nic->tx_threshold = 0xE0; |
|
1076 |
|
1077 /* no interrupt for every tx completion, delay = 256us if not 557 */ |
|
1078 nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | |
|
1079 ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); |
|
1080 |
|
1081 /* Template for a freshly allocated RFD */ |
|
1082 nic->blank_rfd.command = 0; |
|
1083 nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF); |
|
1084 nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); |
|
1085 |
|
1086 /* MII setup */ |
|
1087 nic->mii.phy_id_mask = 0x1F; |
|
1088 nic->mii.reg_num_mask = 0x1F; |
|
1089 nic->mii.dev = nic->netdev; |
|
1090 nic->mii.mdio_read = mdio_read; |
|
1091 nic->mii.mdio_write = mdio_write; |
|
1092 } |
|
1093 |
|
1094 static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) |
|
1095 { |
|
1096 struct config *config = &cb->u.config; |
|
1097 u8 *c = (u8 *)config; |
|
1098 struct net_device *netdev = nic->netdev; |
|
1099 |
|
1100 cb->command = cpu_to_le16(cb_config); |
|
1101 |
|
1102 memset(config, 0, sizeof(struct config)); |
|
1103 |
|
1104 config->byte_count = 0x16; /* bytes in this struct */ |
|
1105 config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */ |
|
1106 config->direct_rx_dma = 0x1; /* reserved */ |
|
1107 config->standard_tcb = 0x1; /* 1=standard, 0=extended */ |
|
1108 config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */ |
|
1109 config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */ |
|
1110 config->tx_underrun_retry = 0x3; /* # of underrun retries */ |
|
1111 if (e100_phy_supports_mii(nic)) |
|
1112 config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */ |
|
1113 config->pad10 = 0x6; |
|
1114 config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */ |
|
1115 config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */ |
|
1116 config->ifs = 0x6; /* x16 = inter frame spacing */ |
|
1117 config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */ |
|
1118 config->pad15_1 = 0x1; |
|
1119 config->pad15_2 = 0x1; |
|
1120 config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */ |
|
1121 config->fc_delay_hi = 0x40; /* time delay for fc frame */ |
|
1122 config->tx_padding = 0x1; /* 1=pad short frames */ |
|
1123 config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */ |
|
1124 config->pad18 = 0x1; |
|
1125 config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */ |
|
1126 config->pad20_1 = 0x1F; |
|
1127 config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */ |
|
1128 config->pad21_1 = 0x5; |
|
1129 |
|
1130 config->adaptive_ifs = nic->adaptive_ifs; |
|
1131 config->loopback = nic->loopback; |
|
1132 |
|
1133 if (nic->mii.force_media && nic->mii.full_duplex) |
|
1134 config->full_duplex_force = 0x1; /* 1=force, 0=auto */ |
|
1135 |
|
1136 if (nic->flags & promiscuous || nic->loopback) { |
|
1137 config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */ |
|
1138 config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */ |
|
1139 config->promiscuous_mode = 0x1; /* 1=on, 0=off */ |
|
1140 } |
|
1141 |
|
1142 if (unlikely(netdev->features & NETIF_F_RXFCS)) |
|
1143 config->rx_crc_transfer = 0x1; /* 1=save, 0=discard */ |
|
1144 |
|
1145 if (nic->flags & multicast_all) |
|
1146 config->multicast_all = 0x1; /* 1=accept, 0=no */ |
|
1147 |
|
1148 /* disable WoL when up */ |
|
1149 if (netif_running(nic->netdev) || !(nic->flags & wol_magic)) |
|
1150 config->magic_packet_disable = 0x1; /* 1=off, 0=on */ |
|
1151 |
|
1152 if (nic->mac >= mac_82558_D101_A4) { |
|
1153 config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */ |
|
1154 config->mwi_enable = 0x1; /* 1=enable, 0=disable */ |
|
1155 config->standard_tcb = 0x0; /* 1=standard, 0=extended */ |
|
1156 config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */ |
|
1157 if (nic->mac >= mac_82559_D101M) { |
|
1158 config->tno_intr = 0x1; /* TCO stats enable */ |
|
1159 /* Enable TCO in extended config */ |
|
1160 if (nic->mac >= mac_82551_10) { |
|
1161 config->byte_count = 0x20; /* extended bytes */ |
|
1162 config->rx_d102_mode = 0x1; /* GMRC for TCO */ |
|
1163 } |
|
1164 } else { |
|
1165 config->standard_stat_counter = 0x0; |
|
1166 } |
|
1167 } |
|
1168 |
|
1169 if (netdev->features & NETIF_F_RXALL) { |
|
1170 config->rx_save_overruns = 0x1; /* 1=save, 0=discard */ |
|
1171 config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */ |
|
1172 config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */ |
|
1173 } |
|
1174 |
|
1175 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1176 "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", |
|
1177 c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]); |
|
1178 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1179 "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", |
|
1180 c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]); |
|
1181 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1182 "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", |
|
1183 c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); |
|
1184 } |
|
1185 |
|
1186 /************************************************************************* |
|
1187 * CPUSaver parameters |
|
1188 * |
|
1189 * All CPUSaver parameters are 16-bit literals that are part of a |
|
1190 * "move immediate value" instruction. By changing the value of |
|
1191 * the literal in the instruction before the code is loaded, the |
|
1192 * driver can change the algorithm. |
|
1193 * |
|
1194 * INTDELAY - This loads the dead-man timer with its initial value. |
|
1195 * When this timer expires the interrupt is asserted, and the |
|
1196 * timer is reset each time a new packet is received. (see |
|
1197 * BUNDLEMAX below to set the limit on number of chained packets) |
|
1198 * The current default is 0x600 or 1536. Experiments show that |
|
1199 * the value should probably stay within the 0x200 - 0x1000. |
|
1200 * |
|
1201 * BUNDLEMAX - |
|
1202 * This sets the maximum number of frames that will be bundled. In |
|
1203 * some situations, such as the TCP windowing algorithm, it may be |
|
1204 * better to limit the growth of the bundle size than let it go as |
|
1205 * high as it can, because that could cause too much added latency. |
|
1206 * The default is six, because this is the number of packets in the |
|
1207 * default TCP window size. A value of 1 would make CPUSaver indicate |
|
1208 * an interrupt for every frame received. If you do not want to put |
|
1209 * a limit on the bundle size, set this value to xFFFF. |
|
1210 * |
|
1211 * BUNDLESMALL - |
|
1212 * This contains a bit-mask describing the minimum size frame that |
|
1213 * will be bundled. The default masks the lower 7 bits, which means |
|
1214 * that any frame less than 128 bytes in length will not be bundled, |
|
1215 * but will instead immediately generate an interrupt. This does |
|
1216 * not affect the current bundle in any way. Any frame that is 128 |
|
1217 * bytes or large will be bundled normally. This feature is meant |
|
1218 * to provide immediate indication of ACK frames in a TCP environment. |
|
1219 * Customers were seeing poor performance when a machine with CPUSaver |
|
1220 * enabled was sending but not receiving. The delay introduced when |
|
1221 * the ACKs were received was enough to reduce total throughput, because |
|
1222 * the sender would sit idle until the ACK was finally seen. |
|
1223 * |
|
1224 * The current default is 0xFF80, which masks out the lower 7 bits. |
|
1225 * This means that any frame which is x7F (127) bytes or smaller |
|
1226 * will cause an immediate interrupt. Because this value must be a |
|
1227 * bit mask, there are only a few valid values that can be used. To |
|
1228 * turn this feature off, the driver can write the value xFFFF to the |
|
1229 * lower word of this instruction (in the same way that the other |
|
1230 * parameters are used). Likewise, a value of 0xF800 (2047) would |
|
1231 * cause an interrupt to be generated for every frame, because all |
|
1232 * standard Ethernet frames are <= 2047 bytes in length. |
|
1233 *************************************************************************/ |
|
1234 |
|
1235 /* if you wish to disable the ucode functionality, while maintaining the |
|
1236 * workarounds it provides, set the following defines to: |
|
1237 * BUNDLESMALL 0 |
|
1238 * BUNDLEMAX 1 |
|
1239 * INTDELAY 1 |
|
1240 */ |
|
1241 #define BUNDLESMALL 1 |
|
1242 #define BUNDLEMAX (u16)6 |
|
1243 #define INTDELAY (u16)1536 /* 0x600 */ |
|
1244 |
|
1245 /* Initialize firmware */ |
|
1246 static const struct firmware *e100_request_firmware(struct nic *nic) |
|
1247 { |
|
1248 const char *fw_name; |
|
1249 const struct firmware *fw = nic->fw; |
|
1250 u8 timer, bundle, min_size; |
|
1251 int err = 0; |
|
1252 bool required = false; |
|
1253 |
|
1254 /* do not load u-code for ICH devices */ |
|
1255 if (nic->flags & ich) |
|
1256 return NULL; |
|
1257 |
|
1258 /* Search for ucode match against h/w revision |
|
1259 * |
|
1260 * Based on comments in the source code for the FreeBSD fxp |
|
1261 * driver, the FIRMWARE_D102E ucode includes both CPUSaver and |
|
1262 * |
|
1263 * "fixes for bugs in the B-step hardware (specifically, bugs |
|
1264 * with Inline Receive)." |
|
1265 * |
|
1266 * So we must fail if it cannot be loaded. |
|
1267 * |
|
1268 * The other microcode files are only required for the optional |
|
1269 * CPUSaver feature. Nice to have, but no reason to fail. |
|
1270 */ |
|
1271 if (nic->mac == mac_82559_D101M) { |
|
1272 fw_name = FIRMWARE_D101M; |
|
1273 } else if (nic->mac == mac_82559_D101S) { |
|
1274 fw_name = FIRMWARE_D101S; |
|
1275 } else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10) { |
|
1276 fw_name = FIRMWARE_D102E; |
|
1277 required = true; |
|
1278 } else { /* No ucode on other devices */ |
|
1279 return NULL; |
|
1280 } |
|
1281 |
|
1282 /* If the firmware has not previously been loaded, request a pointer |
|
1283 * to it. If it was previously loaded, we are reinitializing the |
|
1284 * adapter, possibly in a resume from hibernate, in which case |
|
1285 * request_firmware() cannot be used. |
|
1286 */ |
|
1287 if (!fw) |
|
1288 err = request_firmware(&fw, fw_name, &nic->pdev->dev); |
|
1289 |
|
1290 if (err) { |
|
1291 if (required) { |
|
1292 netif_err(nic, probe, nic->netdev, |
|
1293 "Failed to load firmware \"%s\": %d\n", |
|
1294 fw_name, err); |
|
1295 return ERR_PTR(err); |
|
1296 } else { |
|
1297 netif_info(nic, probe, nic->netdev, |
|
1298 "CPUSaver disabled. Needs \"%s\": %d\n", |
|
1299 fw_name, err); |
|
1300 return NULL; |
|
1301 } |
|
1302 } |
|
1303 |
|
1304 /* Firmware should be precisely UCODE_SIZE (words) plus three bytes |
|
1305 indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */ |
|
1306 if (fw->size != UCODE_SIZE * 4 + 3) { |
|
1307 netif_err(nic, probe, nic->netdev, |
|
1308 "Firmware \"%s\" has wrong size %zu\n", |
|
1309 fw_name, fw->size); |
|
1310 release_firmware(fw); |
|
1311 return ERR_PTR(-EINVAL); |
|
1312 } |
|
1313 |
|
1314 /* Read timer, bundle and min_size from end of firmware blob */ |
|
1315 timer = fw->data[UCODE_SIZE * 4]; |
|
1316 bundle = fw->data[UCODE_SIZE * 4 + 1]; |
|
1317 min_size = fw->data[UCODE_SIZE * 4 + 2]; |
|
1318 |
|
1319 if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE || |
|
1320 min_size >= UCODE_SIZE) { |
|
1321 netif_err(nic, probe, nic->netdev, |
|
1322 "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n", |
|
1323 fw_name, timer, bundle, min_size); |
|
1324 release_firmware(fw); |
|
1325 return ERR_PTR(-EINVAL); |
|
1326 } |
|
1327 |
|
1328 /* OK, firmware is validated and ready to use. Save a pointer |
|
1329 * to it in the nic */ |
|
1330 nic->fw = fw; |
|
1331 return fw; |
|
1332 } |
|
1333 |
|
1334 static void e100_setup_ucode(struct nic *nic, struct cb *cb, |
|
1335 struct sk_buff *skb) |
|
1336 { |
|
1337 const struct firmware *fw = (void *)skb; |
|
1338 u8 timer, bundle, min_size; |
|
1339 |
|
1340 /* It's not a real skb; we just abused the fact that e100_exec_cb |
|
1341 will pass it through to here... */ |
|
1342 cb->skb = NULL; |
|
1343 |
|
1344 /* firmware is stored as little endian already */ |
|
1345 memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4); |
|
1346 |
|
1347 /* Read timer, bundle and min_size from end of firmware blob */ |
|
1348 timer = fw->data[UCODE_SIZE * 4]; |
|
1349 bundle = fw->data[UCODE_SIZE * 4 + 1]; |
|
1350 min_size = fw->data[UCODE_SIZE * 4 + 2]; |
|
1351 |
|
1352 /* Insert user-tunable settings in cb->u.ucode */ |
|
1353 cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000); |
|
1354 cb->u.ucode[timer] |= cpu_to_le32(INTDELAY); |
|
1355 cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000); |
|
1356 cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX); |
|
1357 cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000); |
|
1358 cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80); |
|
1359 |
|
1360 cb->command = cpu_to_le16(cb_ucode | cb_el); |
|
1361 } |
|
1362 |
|
1363 static inline int e100_load_ucode_wait(struct nic *nic) |
|
1364 { |
|
1365 const struct firmware *fw; |
|
1366 int err = 0, counter = 50; |
|
1367 struct cb *cb = nic->cb_to_clean; |
|
1368 |
|
1369 fw = e100_request_firmware(nic); |
|
1370 /* If it's NULL, then no ucode is required */ |
|
1371 if (!fw || IS_ERR(fw)) |
|
1372 return PTR_ERR(fw); |
|
1373 |
|
1374 if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode))) |
|
1375 netif_err(nic, probe, nic->netdev, |
|
1376 "ucode cmd failed with error %d\n", err); |
|
1377 |
|
1378 /* must restart cuc */ |
|
1379 nic->cuc_cmd = cuc_start; |
|
1380 |
|
1381 /* wait for completion */ |
|
1382 e100_write_flush(nic); |
|
1383 udelay(10); |
|
1384 |
|
1385 /* wait for possibly (ouch) 500ms */ |
|
1386 while (!(cb->status & cpu_to_le16(cb_complete))) { |
|
1387 msleep(10); |
|
1388 if (!--counter) break; |
|
1389 } |
|
1390 |
|
1391 /* ack any interrupts, something could have been set */ |
|
1392 iowrite8(~0, &nic->csr->scb.stat_ack); |
|
1393 |
|
1394 /* if the command failed, or is not OK, notify and return */ |
|
1395 if (!counter || !(cb->status & cpu_to_le16(cb_ok))) { |
|
1396 netif_err(nic, probe, nic->netdev, "ucode load failed\n"); |
|
1397 err = -EPERM; |
|
1398 } |
|
1399 |
|
1400 return err; |
|
1401 } |
|
1402 |
|
1403 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, |
|
1404 struct sk_buff *skb) |
|
1405 { |
|
1406 cb->command = cpu_to_le16(cb_iaaddr); |
|
1407 memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN); |
|
1408 } |
|
1409 |
|
1410 static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) |
|
1411 { |
|
1412 cb->command = cpu_to_le16(cb_dump); |
|
1413 cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr + |
|
1414 offsetof(struct mem, dump_buf)); |
|
1415 } |
|
1416 |
|
1417 static int e100_phy_check_without_mii(struct nic *nic) |
|
1418 { |
|
1419 u8 phy_type; |
|
1420 int without_mii; |
|
1421 |
|
1422 phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f; |
|
1423 |
|
1424 switch (phy_type) { |
|
1425 case NoSuchPhy: /* Non-MII PHY; UNTESTED! */ |
|
1426 case I82503: /* Non-MII PHY; UNTESTED! */ |
|
1427 case S80C24: /* Non-MII PHY; tested and working */ |
|
1428 /* paragraph from the FreeBSD driver, "FXP_PHY_80C24": |
|
1429 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter |
|
1430 * doesn't have a programming interface of any sort. The |
|
1431 * media is sensed automatically based on how the link partner |
|
1432 * is configured. This is, in essence, manual configuration. |
|
1433 */ |
|
1434 netif_info(nic, probe, nic->netdev, |
|
1435 "found MII-less i82503 or 80c24 or other PHY\n"); |
|
1436 |
|
1437 nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated; |
|
1438 nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */ |
|
1439 |
|
1440 /* these might be needed for certain MII-less cards... |
|
1441 * nic->flags |= ich; |
|
1442 * nic->flags |= ich_10h_workaround; */ |
|
1443 |
|
1444 without_mii = 1; |
|
1445 break; |
|
1446 default: |
|
1447 without_mii = 0; |
|
1448 break; |
|
1449 } |
|
1450 return without_mii; |
|
1451 } |
|
1452 |
|
1453 #define NCONFIG_AUTO_SWITCH 0x0080 |
|
1454 #define MII_NSC_CONG MII_RESV1 |
|
1455 #define NSC_CONG_ENABLE 0x0100 |
|
1456 #define NSC_CONG_TXREADY 0x0400 |
|
1457 #define ADVERTISE_FC_SUPPORTED 0x0400 |
|
1458 static int e100_phy_init(struct nic *nic) |
|
1459 { |
|
1460 struct net_device *netdev = nic->netdev; |
|
1461 u32 addr; |
|
1462 u16 bmcr, stat, id_lo, id_hi, cong; |
|
1463 |
|
1464 /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */ |
|
1465 for (addr = 0; addr < 32; addr++) { |
|
1466 nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr; |
|
1467 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR); |
|
1468 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR); |
|
1469 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR); |
|
1470 if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0)))) |
|
1471 break; |
|
1472 } |
|
1473 if (addr == 32) { |
|
1474 /* uhoh, no PHY detected: check whether we seem to be some |
|
1475 * weird, rare variant which is *known* to not have any MII. |
|
1476 * But do this AFTER MII checking only, since this does |
|
1477 * lookup of EEPROM values which may easily be unreliable. */ |
|
1478 if (e100_phy_check_without_mii(nic)) |
|
1479 return 0; /* simply return and hope for the best */ |
|
1480 else { |
|
1481 /* for unknown cases log a fatal error */ |
|
1482 netif_err(nic, hw, nic->netdev, |
|
1483 "Failed to locate any known PHY, aborting\n"); |
|
1484 return -EAGAIN; |
|
1485 } |
|
1486 } else |
|
1487 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1488 "phy_addr = %d\n", nic->mii.phy_id); |
|
1489 |
|
1490 /* Get phy ID */ |
|
1491 id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); |
|
1492 id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); |
|
1493 nic->phy = (u32)id_hi << 16 | (u32)id_lo; |
|
1494 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1495 "phy ID = 0x%08X\n", nic->phy); |
|
1496 |
|
1497 /* Select the phy and isolate the rest */ |
|
1498 for (addr = 0; addr < 32; addr++) { |
|
1499 if (addr != nic->mii.phy_id) { |
|
1500 mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); |
|
1501 } else if (nic->phy != phy_82552_v) { |
|
1502 bmcr = mdio_read(netdev, addr, MII_BMCR); |
|
1503 mdio_write(netdev, addr, MII_BMCR, |
|
1504 bmcr & ~BMCR_ISOLATE); |
|
1505 } |
|
1506 } |
|
1507 /* |
|
1508 * Workaround for 82552: |
|
1509 * Clear the ISOLATE bit on selected phy_id last (mirrored on all |
|
1510 * other phy_id's) using bmcr value from addr discovery loop above. |
|
1511 */ |
|
1512 if (nic->phy == phy_82552_v) |
|
1513 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, |
|
1514 bmcr & ~BMCR_ISOLATE); |
|
1515 |
|
1516 /* Handle National tx phys */ |
|
1517 #define NCS_PHY_MODEL_MASK 0xFFF0FFFF |
|
1518 if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { |
|
1519 /* Disable congestion control */ |
|
1520 cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG); |
|
1521 cong |= NSC_CONG_TXREADY; |
|
1522 cong &= ~NSC_CONG_ENABLE; |
|
1523 mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong); |
|
1524 } |
|
1525 |
|
1526 if (nic->phy == phy_82552_v) { |
|
1527 u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE); |
|
1528 |
|
1529 /* assign special tweaked mdio_ctrl() function */ |
|
1530 nic->mdio_ctrl = mdio_ctrl_phy_82552_v; |
|
1531 |
|
1532 /* Workaround Si not advertising flow-control during autoneg */ |
|
1533 advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; |
|
1534 mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert); |
|
1535 |
|
1536 /* Reset for the above changes to take effect */ |
|
1537 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR); |
|
1538 bmcr |= BMCR_RESET; |
|
1539 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); |
|
1540 } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && |
|
1541 (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && |
|
1542 !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { |
|
1543 /* enable/disable MDI/MDI-X auto-switching. */ |
|
1544 mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, |
|
1545 nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); |
|
1546 } |
|
1547 |
|
1548 return 0; |
|
1549 } |
|
1550 |
|
1551 static int e100_hw_init(struct nic *nic) |
|
1552 { |
|
1553 int err = 0; |
|
1554 |
|
1555 e100_hw_reset(nic); |
|
1556 |
|
1557 netif_err(nic, hw, nic->netdev, "e100_hw_init\n"); |
|
1558 if (!in_interrupt() && (err = e100_self_test(nic))) |
|
1559 return err; |
|
1560 |
|
1561 if ((err = e100_phy_init(nic))) |
|
1562 return err; |
|
1563 if ((err = e100_exec_cmd(nic, cuc_load_base, 0))) |
|
1564 return err; |
|
1565 if ((err = e100_exec_cmd(nic, ruc_load_base, 0))) |
|
1566 return err; |
|
1567 if ((err = e100_load_ucode_wait(nic))) |
|
1568 return err; |
|
1569 if ((err = e100_exec_cb(nic, NULL, e100_configure))) |
|
1570 return err; |
|
1571 if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr))) |
|
1572 return err; |
|
1573 if ((err = e100_exec_cmd(nic, cuc_dump_addr, |
|
1574 nic->dma_addr + offsetof(struct mem, stats)))) |
|
1575 return err; |
|
1576 if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0))) |
|
1577 return err; |
|
1578 |
|
1579 e100_disable_irq(nic); |
|
1580 |
|
1581 return 0; |
|
1582 } |
|
1583 |
|
1584 static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) |
|
1585 { |
|
1586 struct net_device *netdev = nic->netdev; |
|
1587 struct netdev_hw_addr *ha; |
|
1588 u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS); |
|
1589 |
|
1590 cb->command = cpu_to_le16(cb_multi); |
|
1591 cb->u.multi.count = cpu_to_le16(count * ETH_ALEN); |
|
1592 i = 0; |
|
1593 netdev_for_each_mc_addr(ha, netdev) { |
|
1594 if (i == count) |
|
1595 break; |
|
1596 memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr, |
|
1597 ETH_ALEN); |
|
1598 } |
|
1599 } |
|
1600 |
|
1601 static void e100_set_multicast_list(struct net_device *netdev) |
|
1602 { |
|
1603 struct nic *nic = netdev_priv(netdev); |
|
1604 |
|
1605 netif_printk(nic, hw, KERN_DEBUG, nic->netdev, |
|
1606 "mc_count=%d, flags=0x%04X\n", |
|
1607 netdev_mc_count(netdev), netdev->flags); |
|
1608 |
|
1609 if (netdev->flags & IFF_PROMISC) |
|
1610 nic->flags |= promiscuous; |
|
1611 else |
|
1612 nic->flags &= ~promiscuous; |
|
1613 |
|
1614 if (netdev->flags & IFF_ALLMULTI || |
|
1615 netdev_mc_count(netdev) > E100_MAX_MULTICAST_ADDRS) |
|
1616 nic->flags |= multicast_all; |
|
1617 else |
|
1618 nic->flags &= ~multicast_all; |
|
1619 |
|
1620 e100_exec_cb(nic, NULL, e100_configure); |
|
1621 e100_exec_cb(nic, NULL, e100_multi); |
|
1622 } |
|
1623 |
|
1624 static void e100_update_stats(struct nic *nic) |
|
1625 { |
|
1626 struct net_device *dev = nic->netdev; |
|
1627 struct net_device_stats *ns = &dev->stats; |
|
1628 struct stats *s = &nic->mem->stats; |
|
1629 __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause : |
|
1630 (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames : |
|
1631 &s->complete; |
|
1632 |
|
1633 /* Device's stats reporting may take several microseconds to |
|
1634 * complete, so we're always waiting for results of the |
|
1635 * previous command. */ |
|
1636 |
|
1637 if (*complete == cpu_to_le32(cuc_dump_reset_complete)) { |
|
1638 *complete = 0; |
|
1639 nic->tx_frames = le32_to_cpu(s->tx_good_frames); |
|
1640 nic->tx_collisions = le32_to_cpu(s->tx_total_collisions); |
|
1641 ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions); |
|
1642 ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions); |
|
1643 ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs); |
|
1644 ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns); |
|
1645 ns->collisions += nic->tx_collisions; |
|
1646 ns->tx_errors += le32_to_cpu(s->tx_max_collisions) + |
|
1647 le32_to_cpu(s->tx_lost_crs); |
|
1648 nic->rx_short_frame_errors += |
|
1649 le32_to_cpu(s->rx_short_frame_errors); |
|
1650 ns->rx_length_errors = nic->rx_short_frame_errors + |
|
1651 nic->rx_over_length_errors; |
|
1652 ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors); |
|
1653 ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors); |
|
1654 ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors); |
|
1655 ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors); |
|
1656 ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors); |
|
1657 ns->rx_errors += le32_to_cpu(s->rx_crc_errors) + |
|
1658 le32_to_cpu(s->rx_alignment_errors) + |
|
1659 le32_to_cpu(s->rx_short_frame_errors) + |
|
1660 le32_to_cpu(s->rx_cdt_errors); |
|
1661 nic->tx_deferred += le32_to_cpu(s->tx_deferred); |
|
1662 nic->tx_single_collisions += |
|
1663 le32_to_cpu(s->tx_single_collisions); |
|
1664 nic->tx_multiple_collisions += |
|
1665 le32_to_cpu(s->tx_multiple_collisions); |
|
1666 if (nic->mac >= mac_82558_D101_A4) { |
|
1667 nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause); |
|
1668 nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause); |
|
1669 nic->rx_fc_unsupported += |
|
1670 le32_to_cpu(s->fc_rcv_unsupported); |
|
1671 if (nic->mac >= mac_82559_D101M) { |
|
1672 nic->tx_tco_frames += |
|
1673 le16_to_cpu(s->xmt_tco_frames); |
|
1674 nic->rx_tco_frames += |
|
1675 le16_to_cpu(s->rcv_tco_frames); |
|
1676 } |
|
1677 } |
|
1678 } |
|
1679 |
|
1680 |
|
1681 if (e100_exec_cmd(nic, cuc_dump_reset, 0)) |
|
1682 netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, |
|
1683 "exec cuc_dump_reset failed\n"); |
|
1684 } |
|
1685 |
|
1686 static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) |
|
1687 { |
|
1688 /* Adjust inter-frame-spacing (IFS) between two transmits if |
|
1689 * we're getting collisions on a half-duplex connection. */ |
|
1690 |
|
1691 if (duplex == DUPLEX_HALF) { |
|
1692 u32 prev = nic->adaptive_ifs; |
|
1693 u32 min_frames = (speed == SPEED_100) ? 1000 : 100; |
|
1694 |
|
1695 if ((nic->tx_frames / 32 < nic->tx_collisions) && |
|
1696 (nic->tx_frames > min_frames)) { |
|
1697 if (nic->adaptive_ifs < 60) |
|
1698 nic->adaptive_ifs += 5; |
|
1699 } else if (nic->tx_frames < min_frames) { |
|
1700 if (nic->adaptive_ifs >= 5) |
|
1701 nic->adaptive_ifs -= 5; |
|
1702 } |
|
1703 if (nic->adaptive_ifs != prev) |
|
1704 e100_exec_cb(nic, NULL, e100_configure); |
|
1705 } |
|
1706 } |
|
1707 |
|
1708 static void e100_watchdog(unsigned long data) |
|
1709 { |
|
1710 struct nic *nic = (struct nic *)data; |
|
1711 struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET }; |
|
1712 u32 speed; |
|
1713 |
|
1714 netif_printk(nic, timer, KERN_DEBUG, nic->netdev, |
|
1715 "right now = %ld\n", jiffies); |
|
1716 |
|
1717 /* mii library handles link maintenance tasks */ |
|
1718 |
|
1719 mii_ethtool_gset(&nic->mii, &cmd); |
|
1720 speed = ethtool_cmd_speed(&cmd); |
|
1721 |
|
1722 if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) { |
|
1723 netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n", |
|
1724 speed == SPEED_100 ? 100 : 10, |
|
1725 cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); |
|
1726 } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) { |
|
1727 netdev_info(nic->netdev, "NIC Link is Down\n"); |
|
1728 } |
|
1729 |
|
1730 mii_check_link(&nic->mii); |
|
1731 |
|
1732 /* Software generated interrupt to recover from (rare) Rx |
|
1733 * allocation failure. |
|
1734 * Unfortunately have to use a spinlock to not re-enable interrupts |
|
1735 * accidentally, due to hardware that shares a register between the |
|
1736 * interrupt mask bit and the SW Interrupt generation bit */ |
|
1737 spin_lock_irq(&nic->cmd_lock); |
|
1738 iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi); |
|
1739 e100_write_flush(nic); |
|
1740 spin_unlock_irq(&nic->cmd_lock); |
|
1741 |
|
1742 e100_update_stats(nic); |
|
1743 e100_adjust_adaptive_ifs(nic, speed, cmd.duplex); |
|
1744 |
|
1745 if (nic->mac <= mac_82557_D100_C) |
|
1746 /* Issue a multicast command to workaround a 557 lock up */ |
|
1747 e100_set_multicast_list(nic->netdev); |
|
1748 |
|
1749 if (nic->flags & ich && speed == SPEED_10 && cmd.duplex == DUPLEX_HALF) |
|
1750 /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */ |
|
1751 nic->flags |= ich_10h_workaround; |
|
1752 else |
|
1753 nic->flags &= ~ich_10h_workaround; |
|
1754 |
|
1755 mod_timer(&nic->watchdog, |
|
1756 round_jiffies(jiffies + E100_WATCHDOG_PERIOD)); |
|
1757 } |
|
1758 |
|
1759 static void e100_xmit_prepare(struct nic *nic, struct cb *cb, |
|
1760 struct sk_buff *skb) |
|
1761 { |
|
1762 cb->command = nic->tx_command; |
|
1763 |
|
1764 /* |
|
1765 * Use the last 4 bytes of the SKB payload packet as the CRC, used for |
|
1766 * testing, ie sending frames with bad CRC. |
|
1767 */ |
|
1768 if (unlikely(skb->no_fcs)) |
|
1769 cb->command |= __constant_cpu_to_le16(cb_tx_nc); |
|
1770 else |
|
1771 cb->command &= ~__constant_cpu_to_le16(cb_tx_nc); |
|
1772 |
|
1773 /* interrupt every 16 packets regardless of delay */ |
|
1774 if ((nic->cbs_avail & ~15) == nic->cbs_avail) |
|
1775 cb->command |= cpu_to_le16(cb_i); |
|
1776 cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); |
|
1777 cb->u.tcb.tcb_byte_count = 0; |
|
1778 cb->u.tcb.threshold = nic->tx_threshold; |
|
1779 cb->u.tcb.tbd_count = 1; |
|
1780 cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, |
|
1781 skb->data, skb->len, PCI_DMA_TODEVICE)); |
|
1782 /* check for mapping failure? */ |
|
1783 cb->u.tcb.tbd.size = cpu_to_le16(skb->len); |
|
1784 skb_tx_timestamp(skb); |
|
1785 } |
|
1786 |
|
1787 static netdev_tx_t e100_xmit_frame(struct sk_buff *skb, |
|
1788 struct net_device *netdev) |
|
1789 { |
|
1790 struct nic *nic = netdev_priv(netdev); |
|
1791 int err; |
|
1792 |
|
1793 if (nic->flags & ich_10h_workaround) { |
|
1794 /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang. |
|
1795 Issue a NOP command followed by a 1us delay before |
|
1796 issuing the Tx command. */ |
|
1797 if (e100_exec_cmd(nic, cuc_nop, 0)) |
|
1798 netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, |
|
1799 "exec cuc_nop failed\n"); |
|
1800 udelay(1); |
|
1801 } |
|
1802 |
|
1803 err = e100_exec_cb(nic, skb, e100_xmit_prepare); |
|
1804 |
|
1805 switch (err) { |
|
1806 case -ENOSPC: |
|
1807 /* We queued the skb, but now we're out of space. */ |
|
1808 netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, |
|
1809 "No space for CB\n"); |
|
1810 netif_stop_queue(netdev); |
|
1811 break; |
|
1812 case -ENOMEM: |
|
1813 /* This is a hard error - log it. */ |
|
1814 netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, |
|
1815 "Out of Tx resources, returning skb\n"); |
|
1816 netif_stop_queue(netdev); |
|
1817 return NETDEV_TX_BUSY; |
|
1818 } |
|
1819 |
|
1820 return NETDEV_TX_OK; |
|
1821 } |
|
1822 |
|
1823 static int e100_tx_clean(struct nic *nic) |
|
1824 { |
|
1825 struct net_device *dev = nic->netdev; |
|
1826 struct cb *cb; |
|
1827 int tx_cleaned = 0; |
|
1828 |
|
1829 spin_lock(&nic->cb_lock); |
|
1830 |
|
1831 /* Clean CBs marked complete */ |
|
1832 for (cb = nic->cb_to_clean; |
|
1833 cb->status & cpu_to_le16(cb_complete); |
|
1834 cb = nic->cb_to_clean = cb->next) { |
|
1835 rmb(); /* read skb after status */ |
|
1836 netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev, |
|
1837 "cb[%d]->status = 0x%04X\n", |
|
1838 (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), |
|
1839 cb->status); |
|
1840 |
|
1841 if (likely(cb->skb != NULL)) { |
|
1842 dev->stats.tx_packets++; |
|
1843 dev->stats.tx_bytes += cb->skb->len; |
|
1844 |
|
1845 pci_unmap_single(nic->pdev, |
|
1846 le32_to_cpu(cb->u.tcb.tbd.buf_addr), |
|
1847 le16_to_cpu(cb->u.tcb.tbd.size), |
|
1848 PCI_DMA_TODEVICE); |
|
1849 dev_kfree_skb_any(cb->skb); |
|
1850 cb->skb = NULL; |
|
1851 tx_cleaned = 1; |
|
1852 } |
|
1853 cb->status = 0; |
|
1854 nic->cbs_avail++; |
|
1855 } |
|
1856 |
|
1857 spin_unlock(&nic->cb_lock); |
|
1858 |
|
1859 /* Recover from running out of Tx resources in xmit_frame */ |
|
1860 if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev))) |
|
1861 netif_wake_queue(nic->netdev); |
|
1862 |
|
1863 return tx_cleaned; |
|
1864 } |
|
1865 |
|
1866 static void e100_clean_cbs(struct nic *nic) |
|
1867 { |
|
1868 if (nic->cbs) { |
|
1869 while (nic->cbs_avail != nic->params.cbs.count) { |
|
1870 struct cb *cb = nic->cb_to_clean; |
|
1871 if (cb->skb) { |
|
1872 pci_unmap_single(nic->pdev, |
|
1873 le32_to_cpu(cb->u.tcb.tbd.buf_addr), |
|
1874 le16_to_cpu(cb->u.tcb.tbd.size), |
|
1875 PCI_DMA_TODEVICE); |
|
1876 dev_kfree_skb(cb->skb); |
|
1877 } |
|
1878 nic->cb_to_clean = nic->cb_to_clean->next; |
|
1879 nic->cbs_avail++; |
|
1880 } |
|
1881 pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr); |
|
1882 nic->cbs = NULL; |
|
1883 nic->cbs_avail = 0; |
|
1884 } |
|
1885 nic->cuc_cmd = cuc_start; |
|
1886 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = |
|
1887 nic->cbs; |
|
1888 } |
|
1889 |
|
1890 static int e100_alloc_cbs(struct nic *nic) |
|
1891 { |
|
1892 struct cb *cb; |
|
1893 unsigned int i, count = nic->params.cbs.count; |
|
1894 |
|
1895 nic->cuc_cmd = cuc_start; |
|
1896 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL; |
|
1897 nic->cbs_avail = 0; |
|
1898 |
|
1899 nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL, |
|
1900 &nic->cbs_dma_addr); |
|
1901 if (!nic->cbs) |
|
1902 return -ENOMEM; |
|
1903 memset(nic->cbs, 0, count * sizeof(struct cb)); |
|
1904 |
|
1905 for (cb = nic->cbs, i = 0; i < count; cb++, i++) { |
|
1906 cb->next = (i + 1 < count) ? cb + 1 : nic->cbs; |
|
1907 cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1; |
|
1908 |
|
1909 cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb); |
|
1910 cb->link = cpu_to_le32(nic->cbs_dma_addr + |
|
1911 ((i+1) % count) * sizeof(struct cb)); |
|
1912 } |
|
1913 |
|
1914 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs; |
|
1915 nic->cbs_avail = count; |
|
1916 |
|
1917 return 0; |
|
1918 } |
|
1919 |
|
1920 static inline void e100_start_receiver(struct nic *nic, struct rx *rx) |
|
1921 { |
|
1922 if (!nic->rxs) return; |
|
1923 if (RU_SUSPENDED != nic->ru_running) return; |
|
1924 |
|
1925 /* handle init time starts */ |
|
1926 if (!rx) rx = nic->rxs; |
|
1927 |
|
1928 /* (Re)start RU if suspended or idle and RFA is non-NULL */ |
|
1929 if (rx->skb) { |
|
1930 e100_exec_cmd(nic, ruc_start, rx->dma_addr); |
|
1931 nic->ru_running = RU_RUNNING; |
|
1932 } |
|
1933 } |
|
1934 |
|
1935 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) |
|
1936 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) |
|
1937 { |
|
1938 if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN))) |
|
1939 return -ENOMEM; |
|
1940 |
|
1941 /* Init, and map the RFD. */ |
|
1942 skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd)); |
|
1943 rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, |
|
1944 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); |
|
1945 |
|
1946 if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) { |
|
1947 dev_kfree_skb_any(rx->skb); |
|
1948 rx->skb = NULL; |
|
1949 rx->dma_addr = 0; |
|
1950 return -ENOMEM; |
|
1951 } |
|
1952 |
|
1953 /* Link the RFD to end of RFA by linking previous RFD to |
|
1954 * this one. We are safe to touch the previous RFD because |
|
1955 * it is protected by the before last buffer's el bit being set */ |
|
1956 if (rx->prev->skb) { |
|
1957 struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; |
|
1958 put_unaligned_le32(rx->dma_addr, &prev_rfd->link); |
|
1959 pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, |
|
1960 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); |
|
1961 } |
|
1962 |
|
1963 return 0; |
|
1964 } |
|
1965 |
|
1966 static int e100_rx_indicate(struct nic *nic, struct rx *rx, |
|
1967 unsigned int *work_done, unsigned int work_to_do) |
|
1968 { |
|
1969 struct net_device *dev = nic->netdev; |
|
1970 struct sk_buff *skb = rx->skb; |
|
1971 struct rfd *rfd = (struct rfd *)skb->data; |
|
1972 u16 rfd_status, actual_size; |
|
1973 u16 fcs_pad = 0; |
|
1974 |
|
1975 if (unlikely(work_done && *work_done >= work_to_do)) |
|
1976 return -EAGAIN; |
|
1977 |
|
1978 /* Need to sync before taking a peek at cb_complete bit */ |
|
1979 pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, |
|
1980 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); |
|
1981 rfd_status = le16_to_cpu(rfd->status); |
|
1982 |
|
1983 netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev, |
|
1984 "status=0x%04X\n", rfd_status); |
|
1985 rmb(); /* read size after status bit */ |
|
1986 |
|
1987 /* If data isn't ready, nothing to indicate */ |
|
1988 if (unlikely(!(rfd_status & cb_complete))) { |
|
1989 /* If the next buffer has the el bit, but we think the receiver |
|
1990 * is still running, check to see if it really stopped while |
|
1991 * we had interrupts off. |
|
1992 * This allows for a fast restart without re-enabling |
|
1993 * interrupts */ |
|
1994 if ((le16_to_cpu(rfd->command) & cb_el) && |
|
1995 (RU_RUNNING == nic->ru_running)) |
|
1996 |
|
1997 if (ioread8(&nic->csr->scb.status) & rus_no_res) |
|
1998 nic->ru_running = RU_SUSPENDED; |
|
1999 pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, |
|
2000 sizeof(struct rfd), |
|
2001 PCI_DMA_FROMDEVICE); |
|
2002 return -ENODATA; |
|
2003 } |
|
2004 |
|
2005 /* Get actual data size */ |
|
2006 if (unlikely(dev->features & NETIF_F_RXFCS)) |
|
2007 fcs_pad = 4; |
|
2008 actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF; |
|
2009 if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd))) |
|
2010 actual_size = RFD_BUF_LEN - sizeof(struct rfd); |
|
2011 |
|
2012 /* Get data */ |
|
2013 pci_unmap_single(nic->pdev, rx->dma_addr, |
|
2014 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); |
|
2015 |
|
2016 /* If this buffer has the el bit, but we think the receiver |
|
2017 * is still running, check to see if it really stopped while |
|
2018 * we had interrupts off. |
|
2019 * This allows for a fast restart without re-enabling interrupts. |
|
2020 * This can happen when the RU sees the size change but also sees |
|
2021 * the el bit set. */ |
|
2022 if ((le16_to_cpu(rfd->command) & cb_el) && |
|
2023 (RU_RUNNING == nic->ru_running)) { |
|
2024 |
|
2025 if (ioread8(&nic->csr->scb.status) & rus_no_res) |
|
2026 nic->ru_running = RU_SUSPENDED; |
|
2027 } |
|
2028 |
|
2029 /* Pull off the RFD and put the actual data (minus eth hdr) */ |
|
2030 skb_reserve(skb, sizeof(struct rfd)); |
|
2031 skb_put(skb, actual_size); |
|
2032 skb->protocol = eth_type_trans(skb, nic->netdev); |
|
2033 |
|
2034 /* If we are receiving all frames, then don't bother |
|
2035 * checking for errors. |
|
2036 */ |
|
2037 if (unlikely(dev->features & NETIF_F_RXALL)) { |
|
2038 if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad) |
|
2039 /* Received oversized frame, but keep it. */ |
|
2040 nic->rx_over_length_errors++; |
|
2041 goto process_skb; |
|
2042 } |
|
2043 |
|
2044 if (unlikely(!(rfd_status & cb_ok))) { |
|
2045 /* Don't indicate if hardware indicates errors */ |
|
2046 dev_kfree_skb_any(skb); |
|
2047 } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad) { |
|
2048 /* Don't indicate oversized frames */ |
|
2049 nic->rx_over_length_errors++; |
|
2050 dev_kfree_skb_any(skb); |
|
2051 } else { |
|
2052 process_skb: |
|
2053 dev->stats.rx_packets++; |
|
2054 dev->stats.rx_bytes += (actual_size - fcs_pad); |
|
2055 netif_receive_skb(skb); |
|
2056 if (work_done) |
|
2057 (*work_done)++; |
|
2058 } |
|
2059 |
|
2060 rx->skb = NULL; |
|
2061 |
|
2062 return 0; |
|
2063 } |
|
2064 |
|
2065 static void e100_rx_clean(struct nic *nic, unsigned int *work_done, |
|
2066 unsigned int work_to_do) |
|
2067 { |
|
2068 struct rx *rx; |
|
2069 int restart_required = 0, err = 0; |
|
2070 struct rx *old_before_last_rx, *new_before_last_rx; |
|
2071 struct rfd *old_before_last_rfd, *new_before_last_rfd; |
|
2072 |
|
2073 /* Indicate newly arrived packets */ |
|
2074 for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) { |
|
2075 err = e100_rx_indicate(nic, rx, work_done, work_to_do); |
|
2076 /* Hit quota or no more to clean */ |
|
2077 if (-EAGAIN == err || -ENODATA == err) |
|
2078 break; |
|
2079 } |
|
2080 |
|
2081 |
|
2082 /* On EAGAIN, hit quota so have more work to do, restart once |
|
2083 * cleanup is complete. |
|
2084 * Else, are we already rnr? then pay attention!!! this ensures that |
|
2085 * the state machine progression never allows a start with a |
|
2086 * partially cleaned list, avoiding a race between hardware |
|
2087 * and rx_to_clean when in NAPI mode */ |
|
2088 if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running) |
|
2089 restart_required = 1; |
|
2090 |
|
2091 old_before_last_rx = nic->rx_to_use->prev->prev; |
|
2092 old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data; |
|
2093 |
|
2094 /* Alloc new skbs to refill list */ |
|
2095 for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) { |
|
2096 if (unlikely(e100_rx_alloc_skb(nic, rx))) |
|
2097 break; /* Better luck next time (see watchdog) */ |
|
2098 } |
|
2099 |
|
2100 new_before_last_rx = nic->rx_to_use->prev->prev; |
|
2101 if (new_before_last_rx != old_before_last_rx) { |
|
2102 /* Set the el-bit on the buffer that is before the last buffer. |
|
2103 * This lets us update the next pointer on the last buffer |
|
2104 * without worrying about hardware touching it. |
|
2105 * We set the size to 0 to prevent hardware from touching this |
|
2106 * buffer. |
|
2107 * When the hardware hits the before last buffer with el-bit |
|
2108 * and size of 0, it will RNR interrupt, the RUS will go into |
|
2109 * the No Resources state. It will not complete nor write to |
|
2110 * this buffer. */ |
|
2111 new_before_last_rfd = |
|
2112 (struct rfd *)new_before_last_rx->skb->data; |
|
2113 new_before_last_rfd->size = 0; |
|
2114 new_before_last_rfd->command |= cpu_to_le16(cb_el); |
|
2115 pci_dma_sync_single_for_device(nic->pdev, |
|
2116 new_before_last_rx->dma_addr, sizeof(struct rfd), |
|
2117 PCI_DMA_BIDIRECTIONAL); |
|
2118 |
|
2119 /* Now that we have a new stopping point, we can clear the old |
|
2120 * stopping point. We must sync twice to get the proper |
|
2121 * ordering on the hardware side of things. */ |
|
2122 old_before_last_rfd->command &= ~cpu_to_le16(cb_el); |
|
2123 pci_dma_sync_single_for_device(nic->pdev, |
|
2124 old_before_last_rx->dma_addr, sizeof(struct rfd), |
|
2125 PCI_DMA_BIDIRECTIONAL); |
|
2126 old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN |
|
2127 + ETH_FCS_LEN); |
|
2128 pci_dma_sync_single_for_device(nic->pdev, |
|
2129 old_before_last_rx->dma_addr, sizeof(struct rfd), |
|
2130 PCI_DMA_BIDIRECTIONAL); |
|
2131 } |
|
2132 |
|
2133 if (restart_required) { |
|
2134 // ack the rnr? |
|
2135 iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack); |
|
2136 e100_start_receiver(nic, nic->rx_to_clean); |
|
2137 if (work_done) |
|
2138 (*work_done)++; |
|
2139 } |
|
2140 } |
|
2141 |
|
2142 static void e100_rx_clean_list(struct nic *nic) |
|
2143 { |
|
2144 struct rx *rx; |
|
2145 unsigned int i, count = nic->params.rfds.count; |
|
2146 |
|
2147 nic->ru_running = RU_UNINITIALIZED; |
|
2148 |
|
2149 if (nic->rxs) { |
|
2150 for (rx = nic->rxs, i = 0; i < count; rx++, i++) { |
|
2151 if (rx->skb) { |
|
2152 pci_unmap_single(nic->pdev, rx->dma_addr, |
|
2153 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); |
|
2154 dev_kfree_skb(rx->skb); |
|
2155 } |
|
2156 } |
|
2157 kfree(nic->rxs); |
|
2158 nic->rxs = NULL; |
|
2159 } |
|
2160 |
|
2161 nic->rx_to_use = nic->rx_to_clean = NULL; |
|
2162 } |
|
2163 |
|
2164 static int e100_rx_alloc_list(struct nic *nic) |
|
2165 { |
|
2166 struct rx *rx; |
|
2167 unsigned int i, count = nic->params.rfds.count; |
|
2168 struct rfd *before_last; |
|
2169 |
|
2170 nic->rx_to_use = nic->rx_to_clean = NULL; |
|
2171 nic->ru_running = RU_UNINITIALIZED; |
|
2172 |
|
2173 if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC))) |
|
2174 return -ENOMEM; |
|
2175 |
|
2176 for (rx = nic->rxs, i = 0; i < count; rx++, i++) { |
|
2177 rx->next = (i + 1 < count) ? rx + 1 : nic->rxs; |
|
2178 rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1; |
|
2179 if (e100_rx_alloc_skb(nic, rx)) { |
|
2180 e100_rx_clean_list(nic); |
|
2181 return -ENOMEM; |
|
2182 } |
|
2183 } |
|
2184 /* Set the el-bit on the buffer that is before the last buffer. |
|
2185 * This lets us update the next pointer on the last buffer without |
|
2186 * worrying about hardware touching it. |
|
2187 * We set the size to 0 to prevent hardware from touching this buffer. |
|
2188 * When the hardware hits the before last buffer with el-bit and size |
|
2189 * of 0, it will RNR interrupt, the RU will go into the No Resources |
|
2190 * state. It will not complete nor write to this buffer. */ |
|
2191 rx = nic->rxs->prev->prev; |
|
2192 before_last = (struct rfd *)rx->skb->data; |
|
2193 before_last->command |= cpu_to_le16(cb_el); |
|
2194 before_last->size = 0; |
|
2195 pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, |
|
2196 sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); |
|
2197 |
|
2198 nic->rx_to_use = nic->rx_to_clean = nic->rxs; |
|
2199 nic->ru_running = RU_SUSPENDED; |
|
2200 |
|
2201 return 0; |
|
2202 } |
|
2203 |
|
2204 static irqreturn_t e100_intr(int irq, void *dev_id) |
|
2205 { |
|
2206 struct net_device *netdev = dev_id; |
|
2207 struct nic *nic = netdev_priv(netdev); |
|
2208 u8 stat_ack = ioread8(&nic->csr->scb.stat_ack); |
|
2209 |
|
2210 netif_printk(nic, intr, KERN_DEBUG, nic->netdev, |
|
2211 "stat_ack = 0x%02X\n", stat_ack); |
|
2212 |
|
2213 if (stat_ack == stat_ack_not_ours || /* Not our interrupt */ |
|
2214 stat_ack == stat_ack_not_present) /* Hardware is ejected */ |
|
2215 return IRQ_NONE; |
|
2216 |
|
2217 /* Ack interrupt(s) */ |
|
2218 iowrite8(stat_ack, &nic->csr->scb.stat_ack); |
|
2219 |
|
2220 /* We hit Receive No Resource (RNR); restart RU after cleaning */ |
|
2221 if (stat_ack & stat_ack_rnr) |
|
2222 nic->ru_running = RU_SUSPENDED; |
|
2223 |
|
2224 if (likely(napi_schedule_prep(&nic->napi))) { |
|
2225 e100_disable_irq(nic); |
|
2226 __napi_schedule(&nic->napi); |
|
2227 } |
|
2228 |
|
2229 return IRQ_HANDLED; |
|
2230 } |
|
2231 |
|
2232 static int e100_poll(struct napi_struct *napi, int budget) |
|
2233 { |
|
2234 struct nic *nic = container_of(napi, struct nic, napi); |
|
2235 unsigned int work_done = 0; |
|
2236 |
|
2237 e100_rx_clean(nic, &work_done, budget); |
|
2238 e100_tx_clean(nic); |
|
2239 |
|
2240 /* If budget not fully consumed, exit the polling mode */ |
|
2241 if (work_done < budget) { |
|
2242 napi_complete(napi); |
|
2243 e100_enable_irq(nic); |
|
2244 } |
|
2245 |
|
2246 return work_done; |
|
2247 } |
|
2248 |
|
2249 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
2250 static void e100_netpoll(struct net_device *netdev) |
|
2251 { |
|
2252 struct nic *nic = netdev_priv(netdev); |
|
2253 |
|
2254 e100_disable_irq(nic); |
|
2255 e100_intr(nic->pdev->irq, netdev); |
|
2256 e100_tx_clean(nic); |
|
2257 e100_enable_irq(nic); |
|
2258 } |
|
2259 #endif |
|
2260 |
|
2261 static int e100_set_mac_address(struct net_device *netdev, void *p) |
|
2262 { |
|
2263 struct nic *nic = netdev_priv(netdev); |
|
2264 struct sockaddr *addr = p; |
|
2265 |
|
2266 if (!is_valid_ether_addr(addr->sa_data)) |
|
2267 return -EADDRNOTAVAIL; |
|
2268 |
|
2269 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
|
2270 e100_exec_cb(nic, NULL, e100_setup_iaaddr); |
|
2271 |
|
2272 return 0; |
|
2273 } |
|
2274 |
|
2275 static int e100_change_mtu(struct net_device *netdev, int new_mtu) |
|
2276 { |
|
2277 if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN) |
|
2278 return -EINVAL; |
|
2279 netdev->mtu = new_mtu; |
|
2280 return 0; |
|
2281 } |
|
2282 |
|
2283 static int e100_asf(struct nic *nic) |
|
2284 { |
|
2285 /* ASF can be enabled from eeprom */ |
|
2286 return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) && |
|
2287 (nic->eeprom[eeprom_config_asf] & eeprom_asf) && |
|
2288 !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && |
|
2289 ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE); |
|
2290 } |
|
2291 |
|
2292 static int e100_up(struct nic *nic) |
|
2293 { |
|
2294 int err; |
|
2295 |
|
2296 if ((err = e100_rx_alloc_list(nic))) |
|
2297 return err; |
|
2298 if ((err = e100_alloc_cbs(nic))) |
|
2299 goto err_rx_clean_list; |
|
2300 if ((err = e100_hw_init(nic))) |
|
2301 goto err_clean_cbs; |
|
2302 e100_set_multicast_list(nic->netdev); |
|
2303 e100_start_receiver(nic, NULL); |
|
2304 mod_timer(&nic->watchdog, jiffies); |
|
2305 if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED, |
|
2306 nic->netdev->name, nic->netdev))) |
|
2307 goto err_no_irq; |
|
2308 netif_wake_queue(nic->netdev); |
|
2309 napi_enable(&nic->napi); |
|
2310 /* enable ints _after_ enabling poll, preventing a race between |
|
2311 * disable ints+schedule */ |
|
2312 e100_enable_irq(nic); |
|
2313 return 0; |
|
2314 |
|
2315 err_no_irq: |
|
2316 del_timer_sync(&nic->watchdog); |
|
2317 err_clean_cbs: |
|
2318 e100_clean_cbs(nic); |
|
2319 err_rx_clean_list: |
|
2320 e100_rx_clean_list(nic); |
|
2321 return err; |
|
2322 } |
|
2323 |
|
2324 static void e100_down(struct nic *nic) |
|
2325 { |
|
2326 /* wait here for poll to complete */ |
|
2327 napi_disable(&nic->napi); |
|
2328 netif_stop_queue(nic->netdev); |
|
2329 e100_hw_reset(nic); |
|
2330 free_irq(nic->pdev->irq, nic->netdev); |
|
2331 del_timer_sync(&nic->watchdog); |
|
2332 netif_carrier_off(nic->netdev); |
|
2333 e100_clean_cbs(nic); |
|
2334 e100_rx_clean_list(nic); |
|
2335 } |
|
2336 |
|
2337 static void e100_tx_timeout(struct net_device *netdev) |
|
2338 { |
|
2339 struct nic *nic = netdev_priv(netdev); |
|
2340 |
|
2341 /* Reset outside of interrupt context, to avoid request_irq |
|
2342 * in interrupt context */ |
|
2343 schedule_work(&nic->tx_timeout_task); |
|
2344 } |
|
2345 |
|
2346 static void e100_tx_timeout_task(struct work_struct *work) |
|
2347 { |
|
2348 struct nic *nic = container_of(work, struct nic, tx_timeout_task); |
|
2349 struct net_device *netdev = nic->netdev; |
|
2350 |
|
2351 netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, |
|
2352 "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status)); |
|
2353 |
|
2354 rtnl_lock(); |
|
2355 if (netif_running(netdev)) { |
|
2356 e100_down(netdev_priv(netdev)); |
|
2357 e100_up(netdev_priv(netdev)); |
|
2358 } |
|
2359 rtnl_unlock(); |
|
2360 } |
|
2361 |
|
2362 static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) |
|
2363 { |
|
2364 int err; |
|
2365 struct sk_buff *skb; |
|
2366 |
|
2367 /* Use driver resources to perform internal MAC or PHY |
|
2368 * loopback test. A single packet is prepared and transmitted |
|
2369 * in loopback mode, and the test passes if the received |
|
2370 * packet compares byte-for-byte to the transmitted packet. */ |
|
2371 |
|
2372 if ((err = e100_rx_alloc_list(nic))) |
|
2373 return err; |
|
2374 if ((err = e100_alloc_cbs(nic))) |
|
2375 goto err_clean_rx; |
|
2376 |
|
2377 /* ICH PHY loopback is broken so do MAC loopback instead */ |
|
2378 if (nic->flags & ich && loopback_mode == lb_phy) |
|
2379 loopback_mode = lb_mac; |
|
2380 |
|
2381 nic->loopback = loopback_mode; |
|
2382 if ((err = e100_hw_init(nic))) |
|
2383 goto err_loopback_none; |
|
2384 |
|
2385 if (loopback_mode == lb_phy) |
|
2386 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, |
|
2387 BMCR_LOOPBACK); |
|
2388 |
|
2389 e100_start_receiver(nic, NULL); |
|
2390 |
|
2391 if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) { |
|
2392 err = -ENOMEM; |
|
2393 goto err_loopback_none; |
|
2394 } |
|
2395 skb_put(skb, ETH_DATA_LEN); |
|
2396 memset(skb->data, 0xFF, ETH_DATA_LEN); |
|
2397 e100_xmit_frame(skb, nic->netdev); |
|
2398 |
|
2399 msleep(10); |
|
2400 |
|
2401 pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, |
|
2402 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); |
|
2403 |
|
2404 if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), |
|
2405 skb->data, ETH_DATA_LEN)) |
|
2406 err = -EAGAIN; |
|
2407 |
|
2408 err_loopback_none: |
|
2409 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0); |
|
2410 nic->loopback = lb_none; |
|
2411 e100_clean_cbs(nic); |
|
2412 e100_hw_reset(nic); |
|
2413 err_clean_rx: |
|
2414 e100_rx_clean_list(nic); |
|
2415 return err; |
|
2416 } |
|
2417 |
|
2418 #define MII_LED_CONTROL 0x1B |
|
2419 #define E100_82552_LED_OVERRIDE 0x19 |
|
2420 #define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */ |
|
2421 #define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */ |
|
2422 |
|
2423 static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) |
|
2424 { |
|
2425 struct nic *nic = netdev_priv(netdev); |
|
2426 return mii_ethtool_gset(&nic->mii, cmd); |
|
2427 } |
|
2428 |
|
2429 static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd) |
|
2430 { |
|
2431 struct nic *nic = netdev_priv(netdev); |
|
2432 int err; |
|
2433 |
|
2434 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET); |
|
2435 err = mii_ethtool_sset(&nic->mii, cmd); |
|
2436 e100_exec_cb(nic, NULL, e100_configure); |
|
2437 |
|
2438 return err; |
|
2439 } |
|
2440 |
|
2441 static void e100_get_drvinfo(struct net_device *netdev, |
|
2442 struct ethtool_drvinfo *info) |
|
2443 { |
|
2444 struct nic *nic = netdev_priv(netdev); |
|
2445 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
|
2446 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
|
2447 strlcpy(info->bus_info, pci_name(nic->pdev), |
|
2448 sizeof(info->bus_info)); |
|
2449 } |
|
2450 |
|
2451 #define E100_PHY_REGS 0x1C |
|
2452 static int e100_get_regs_len(struct net_device *netdev) |
|
2453 { |
|
2454 struct nic *nic = netdev_priv(netdev); |
|
2455 return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf); |
|
2456 } |
|
2457 |
|
2458 static void e100_get_regs(struct net_device *netdev, |
|
2459 struct ethtool_regs *regs, void *p) |
|
2460 { |
|
2461 struct nic *nic = netdev_priv(netdev); |
|
2462 u32 *buff = p; |
|
2463 int i; |
|
2464 |
|
2465 regs->version = (1 << 24) | nic->pdev->revision; |
|
2466 buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 | |
|
2467 ioread8(&nic->csr->scb.cmd_lo) << 16 | |
|
2468 ioread16(&nic->csr->scb.status); |
|
2469 for (i = E100_PHY_REGS; i >= 0; i--) |
|
2470 buff[1 + E100_PHY_REGS - i] = |
|
2471 mdio_read(netdev, nic->mii.phy_id, i); |
|
2472 memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf)); |
|
2473 e100_exec_cb(nic, NULL, e100_dump); |
|
2474 msleep(10); |
|
2475 memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf, |
|
2476 sizeof(nic->mem->dump_buf)); |
|
2477 } |
|
2478 |
|
2479 static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) |
|
2480 { |
|
2481 struct nic *nic = netdev_priv(netdev); |
|
2482 wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0; |
|
2483 wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0; |
|
2484 } |
|
2485 |
|
2486 static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) |
|
2487 { |
|
2488 struct nic *nic = netdev_priv(netdev); |
|
2489 |
|
2490 if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) || |
|
2491 !device_can_wakeup(&nic->pdev->dev)) |
|
2492 return -EOPNOTSUPP; |
|
2493 |
|
2494 if (wol->wolopts) |
|
2495 nic->flags |= wol_magic; |
|
2496 else |
|
2497 nic->flags &= ~wol_magic; |
|
2498 |
|
2499 device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts); |
|
2500 |
|
2501 e100_exec_cb(nic, NULL, e100_configure); |
|
2502 |
|
2503 return 0; |
|
2504 } |
|
2505 |
|
2506 static u32 e100_get_msglevel(struct net_device *netdev) |
|
2507 { |
|
2508 struct nic *nic = netdev_priv(netdev); |
|
2509 return nic->msg_enable; |
|
2510 } |
|
2511 |
|
2512 static void e100_set_msglevel(struct net_device *netdev, u32 value) |
|
2513 { |
|
2514 struct nic *nic = netdev_priv(netdev); |
|
2515 nic->msg_enable = value; |
|
2516 } |
|
2517 |
|
2518 static int e100_nway_reset(struct net_device *netdev) |
|
2519 { |
|
2520 struct nic *nic = netdev_priv(netdev); |
|
2521 return mii_nway_restart(&nic->mii); |
|
2522 } |
|
2523 |
|
2524 static u32 e100_get_link(struct net_device *netdev) |
|
2525 { |
|
2526 struct nic *nic = netdev_priv(netdev); |
|
2527 return mii_link_ok(&nic->mii); |
|
2528 } |
|
2529 |
|
2530 static int e100_get_eeprom_len(struct net_device *netdev) |
|
2531 { |
|
2532 struct nic *nic = netdev_priv(netdev); |
|
2533 return nic->eeprom_wc << 1; |
|
2534 } |
|
2535 |
|
2536 #define E100_EEPROM_MAGIC 0x1234 |
|
2537 static int e100_get_eeprom(struct net_device *netdev, |
|
2538 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
2539 { |
|
2540 struct nic *nic = netdev_priv(netdev); |
|
2541 |
|
2542 eeprom->magic = E100_EEPROM_MAGIC; |
|
2543 memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len); |
|
2544 |
|
2545 return 0; |
|
2546 } |
|
2547 |
|
2548 static int e100_set_eeprom(struct net_device *netdev, |
|
2549 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
2550 { |
|
2551 struct nic *nic = netdev_priv(netdev); |
|
2552 |
|
2553 if (eeprom->magic != E100_EEPROM_MAGIC) |
|
2554 return -EINVAL; |
|
2555 |
|
2556 memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len); |
|
2557 |
|
2558 return e100_eeprom_save(nic, eeprom->offset >> 1, |
|
2559 (eeprom->len >> 1) + 1); |
|
2560 } |
|
2561 |
|
2562 static void e100_get_ringparam(struct net_device *netdev, |
|
2563 struct ethtool_ringparam *ring) |
|
2564 { |
|
2565 struct nic *nic = netdev_priv(netdev); |
|
2566 struct param_range *rfds = &nic->params.rfds; |
|
2567 struct param_range *cbs = &nic->params.cbs; |
|
2568 |
|
2569 ring->rx_max_pending = rfds->max; |
|
2570 ring->tx_max_pending = cbs->max; |
|
2571 ring->rx_pending = rfds->count; |
|
2572 ring->tx_pending = cbs->count; |
|
2573 } |
|
2574 |
|
2575 static int e100_set_ringparam(struct net_device *netdev, |
|
2576 struct ethtool_ringparam *ring) |
|
2577 { |
|
2578 struct nic *nic = netdev_priv(netdev); |
|
2579 struct param_range *rfds = &nic->params.rfds; |
|
2580 struct param_range *cbs = &nic->params.cbs; |
|
2581 |
|
2582 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) |
|
2583 return -EINVAL; |
|
2584 |
|
2585 if (netif_running(netdev)) |
|
2586 e100_down(nic); |
|
2587 rfds->count = max(ring->rx_pending, rfds->min); |
|
2588 rfds->count = min(rfds->count, rfds->max); |
|
2589 cbs->count = max(ring->tx_pending, cbs->min); |
|
2590 cbs->count = min(cbs->count, cbs->max); |
|
2591 netif_info(nic, drv, nic->netdev, "Ring Param settings: rx: %d, tx %d\n", |
|
2592 rfds->count, cbs->count); |
|
2593 if (netif_running(netdev)) |
|
2594 e100_up(nic); |
|
2595 |
|
2596 return 0; |
|
2597 } |
|
2598 |
|
2599 static const char e100_gstrings_test[][ETH_GSTRING_LEN] = { |
|
2600 "Link test (on/offline)", |
|
2601 "Eeprom test (on/offline)", |
|
2602 "Self test (offline)", |
|
2603 "Mac loopback (offline)", |
|
2604 "Phy loopback (offline)", |
|
2605 }; |
|
2606 #define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test) |
|
2607 |
|
2608 static void e100_diag_test(struct net_device *netdev, |
|
2609 struct ethtool_test *test, u64 *data) |
|
2610 { |
|
2611 struct ethtool_cmd cmd; |
|
2612 struct nic *nic = netdev_priv(netdev); |
|
2613 int i, err; |
|
2614 |
|
2615 memset(data, 0, E100_TEST_LEN * sizeof(u64)); |
|
2616 data[0] = !mii_link_ok(&nic->mii); |
|
2617 data[1] = e100_eeprom_load(nic); |
|
2618 if (test->flags & ETH_TEST_FL_OFFLINE) { |
|
2619 |
|
2620 /* save speed, duplex & autoneg settings */ |
|
2621 err = mii_ethtool_gset(&nic->mii, &cmd); |
|
2622 |
|
2623 if (netif_running(netdev)) |
|
2624 e100_down(nic); |
|
2625 data[2] = e100_self_test(nic); |
|
2626 data[3] = e100_loopback_test(nic, lb_mac); |
|
2627 data[4] = e100_loopback_test(nic, lb_phy); |
|
2628 |
|
2629 /* restore speed, duplex & autoneg settings */ |
|
2630 err = mii_ethtool_sset(&nic->mii, &cmd); |
|
2631 |
|
2632 if (netif_running(netdev)) |
|
2633 e100_up(nic); |
|
2634 } |
|
2635 for (i = 0; i < E100_TEST_LEN; i++) |
|
2636 test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; |
|
2637 |
|
2638 msleep_interruptible(4 * 1000); |
|
2639 } |
|
2640 |
|
2641 static int e100_set_phys_id(struct net_device *netdev, |
|
2642 enum ethtool_phys_id_state state) |
|
2643 { |
|
2644 struct nic *nic = netdev_priv(netdev); |
|
2645 enum led_state { |
|
2646 led_on = 0x01, |
|
2647 led_off = 0x04, |
|
2648 led_on_559 = 0x05, |
|
2649 led_on_557 = 0x07, |
|
2650 }; |
|
2651 u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE : |
|
2652 MII_LED_CONTROL; |
|
2653 u16 leds = 0; |
|
2654 |
|
2655 switch (state) { |
|
2656 case ETHTOOL_ID_ACTIVE: |
|
2657 return 2; |
|
2658 |
|
2659 case ETHTOOL_ID_ON: |
|
2660 leds = (nic->phy == phy_82552_v) ? E100_82552_LED_ON : |
|
2661 (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559; |
|
2662 break; |
|
2663 |
|
2664 case ETHTOOL_ID_OFF: |
|
2665 leds = (nic->phy == phy_82552_v) ? E100_82552_LED_OFF : led_off; |
|
2666 break; |
|
2667 |
|
2668 case ETHTOOL_ID_INACTIVE: |
|
2669 break; |
|
2670 } |
|
2671 |
|
2672 mdio_write(netdev, nic->mii.phy_id, led_reg, leds); |
|
2673 return 0; |
|
2674 } |
|
2675 |
|
2676 static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = { |
|
2677 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors", |
|
2678 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions", |
|
2679 "rx_length_errors", "rx_over_errors", "rx_crc_errors", |
|
2680 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors", |
|
2681 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", |
|
2682 "tx_heartbeat_errors", "tx_window_errors", |
|
2683 /* device-specific stats */ |
|
2684 "tx_deferred", "tx_single_collisions", "tx_multi_collisions", |
|
2685 "tx_flow_control_pause", "rx_flow_control_pause", |
|
2686 "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets", |
|
2687 "rx_short_frame_errors", "rx_over_length_errors", |
|
2688 }; |
|
2689 #define E100_NET_STATS_LEN 21 |
|
2690 #define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats) |
|
2691 |
|
2692 static int e100_get_sset_count(struct net_device *netdev, int sset) |
|
2693 { |
|
2694 switch (sset) { |
|
2695 case ETH_SS_TEST: |
|
2696 return E100_TEST_LEN; |
|
2697 case ETH_SS_STATS: |
|
2698 return E100_STATS_LEN; |
|
2699 default: |
|
2700 return -EOPNOTSUPP; |
|
2701 } |
|
2702 } |
|
2703 |
|
2704 static void e100_get_ethtool_stats(struct net_device *netdev, |
|
2705 struct ethtool_stats *stats, u64 *data) |
|
2706 { |
|
2707 struct nic *nic = netdev_priv(netdev); |
|
2708 int i; |
|
2709 |
|
2710 for (i = 0; i < E100_NET_STATS_LEN; i++) |
|
2711 data[i] = ((unsigned long *)&netdev->stats)[i]; |
|
2712 |
|
2713 data[i++] = nic->tx_deferred; |
|
2714 data[i++] = nic->tx_single_collisions; |
|
2715 data[i++] = nic->tx_multiple_collisions; |
|
2716 data[i++] = nic->tx_fc_pause; |
|
2717 data[i++] = nic->rx_fc_pause; |
|
2718 data[i++] = nic->rx_fc_unsupported; |
|
2719 data[i++] = nic->tx_tco_frames; |
|
2720 data[i++] = nic->rx_tco_frames; |
|
2721 data[i++] = nic->rx_short_frame_errors; |
|
2722 data[i++] = nic->rx_over_length_errors; |
|
2723 } |
|
2724 |
|
2725 static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data) |
|
2726 { |
|
2727 switch (stringset) { |
|
2728 case ETH_SS_TEST: |
|
2729 memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test)); |
|
2730 break; |
|
2731 case ETH_SS_STATS: |
|
2732 memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats)); |
|
2733 break; |
|
2734 } |
|
2735 } |
|
2736 |
|
2737 static const struct ethtool_ops e100_ethtool_ops = { |
|
2738 .get_settings = e100_get_settings, |
|
2739 .set_settings = e100_set_settings, |
|
2740 .get_drvinfo = e100_get_drvinfo, |
|
2741 .get_regs_len = e100_get_regs_len, |
|
2742 .get_regs = e100_get_regs, |
|
2743 .get_wol = e100_get_wol, |
|
2744 .set_wol = e100_set_wol, |
|
2745 .get_msglevel = e100_get_msglevel, |
|
2746 .set_msglevel = e100_set_msglevel, |
|
2747 .nway_reset = e100_nway_reset, |
|
2748 .get_link = e100_get_link, |
|
2749 .get_eeprom_len = e100_get_eeprom_len, |
|
2750 .get_eeprom = e100_get_eeprom, |
|
2751 .set_eeprom = e100_set_eeprom, |
|
2752 .get_ringparam = e100_get_ringparam, |
|
2753 .set_ringparam = e100_set_ringparam, |
|
2754 .self_test = e100_diag_test, |
|
2755 .get_strings = e100_get_strings, |
|
2756 .set_phys_id = e100_set_phys_id, |
|
2757 .get_ethtool_stats = e100_get_ethtool_stats, |
|
2758 .get_sset_count = e100_get_sset_count, |
|
2759 .get_ts_info = ethtool_op_get_ts_info, |
|
2760 }; |
|
2761 |
|
2762 static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
|
2763 { |
|
2764 struct nic *nic = netdev_priv(netdev); |
|
2765 |
|
2766 return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL); |
|
2767 } |
|
2768 |
|
2769 static int e100_alloc(struct nic *nic) |
|
2770 { |
|
2771 nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem), |
|
2772 &nic->dma_addr); |
|
2773 return nic->mem ? 0 : -ENOMEM; |
|
2774 } |
|
2775 |
|
2776 static void e100_free(struct nic *nic) |
|
2777 { |
|
2778 if (nic->mem) { |
|
2779 pci_free_consistent(nic->pdev, sizeof(struct mem), |
|
2780 nic->mem, nic->dma_addr); |
|
2781 nic->mem = NULL; |
|
2782 } |
|
2783 } |
|
2784 |
|
2785 static int e100_open(struct net_device *netdev) |
|
2786 { |
|
2787 struct nic *nic = netdev_priv(netdev); |
|
2788 int err = 0; |
|
2789 |
|
2790 netif_carrier_off(netdev); |
|
2791 if ((err = e100_up(nic))) |
|
2792 netif_err(nic, ifup, nic->netdev, "Cannot open interface, aborting\n"); |
|
2793 return err; |
|
2794 } |
|
2795 |
|
2796 static int e100_close(struct net_device *netdev) |
|
2797 { |
|
2798 e100_down(netdev_priv(netdev)); |
|
2799 return 0; |
|
2800 } |
|
2801 |
|
2802 static int e100_set_features(struct net_device *netdev, |
|
2803 netdev_features_t features) |
|
2804 { |
|
2805 struct nic *nic = netdev_priv(netdev); |
|
2806 netdev_features_t changed = features ^ netdev->features; |
|
2807 |
|
2808 if (!(changed & (NETIF_F_RXFCS | NETIF_F_RXALL))) |
|
2809 return 0; |
|
2810 |
|
2811 netdev->features = features; |
|
2812 e100_exec_cb(nic, NULL, e100_configure); |
|
2813 return 0; |
|
2814 } |
|
2815 |
|
2816 static const struct net_device_ops e100_netdev_ops = { |
|
2817 .ndo_open = e100_open, |
|
2818 .ndo_stop = e100_close, |
|
2819 .ndo_start_xmit = e100_xmit_frame, |
|
2820 .ndo_validate_addr = eth_validate_addr, |
|
2821 .ndo_set_rx_mode = e100_set_multicast_list, |
|
2822 .ndo_set_mac_address = e100_set_mac_address, |
|
2823 .ndo_change_mtu = e100_change_mtu, |
|
2824 .ndo_do_ioctl = e100_do_ioctl, |
|
2825 .ndo_tx_timeout = e100_tx_timeout, |
|
2826 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
2827 .ndo_poll_controller = e100_netpoll, |
|
2828 #endif |
|
2829 .ndo_set_features = e100_set_features, |
|
2830 }; |
|
2831 |
|
2832 static int __devinit e100_probe(struct pci_dev *pdev, |
|
2833 const struct pci_device_id *ent) |
|
2834 { |
|
2835 struct net_device *netdev; |
|
2836 struct nic *nic; |
|
2837 int err; |
|
2838 |
|
2839 if (!(netdev = alloc_etherdev(sizeof(struct nic)))) |
|
2840 return -ENOMEM; |
|
2841 |
|
2842 netdev->hw_features |= NETIF_F_RXFCS; |
|
2843 netdev->priv_flags |= IFF_SUPP_NOFCS; |
|
2844 netdev->hw_features |= NETIF_F_RXALL; |
|
2845 |
|
2846 netdev->netdev_ops = &e100_netdev_ops; |
|
2847 SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops); |
|
2848 netdev->watchdog_timeo = E100_WATCHDOG_PERIOD; |
|
2849 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); |
|
2850 |
|
2851 nic = netdev_priv(netdev); |
|
2852 netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT); |
|
2853 nic->netdev = netdev; |
|
2854 nic->pdev = pdev; |
|
2855 nic->msg_enable = (1 << debug) - 1; |
|
2856 nic->mdio_ctrl = mdio_ctrl_hw; |
|
2857 pci_set_drvdata(pdev, netdev); |
|
2858 |
|
2859 if ((err = pci_enable_device(pdev))) { |
|
2860 netif_err(nic, probe, nic->netdev, "Cannot enable PCI device, aborting\n"); |
|
2861 goto err_out_free_dev; |
|
2862 } |
|
2863 |
|
2864 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
|
2865 netif_err(nic, probe, nic->netdev, "Cannot find proper PCI device base address, aborting\n"); |
|
2866 err = -ENODEV; |
|
2867 goto err_out_disable_pdev; |
|
2868 } |
|
2869 |
|
2870 if ((err = pci_request_regions(pdev, DRV_NAME))) { |
|
2871 netif_err(nic, probe, nic->netdev, "Cannot obtain PCI resources, aborting\n"); |
|
2872 goto err_out_disable_pdev; |
|
2873 } |
|
2874 |
|
2875 if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { |
|
2876 netif_err(nic, probe, nic->netdev, "No usable DMA configuration, aborting\n"); |
|
2877 goto err_out_free_res; |
|
2878 } |
|
2879 |
|
2880 SET_NETDEV_DEV(netdev, &pdev->dev); |
|
2881 |
|
2882 if (use_io) |
|
2883 netif_info(nic, probe, nic->netdev, "using i/o access mode\n"); |
|
2884 |
|
2885 nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr)); |
|
2886 if (!nic->csr) { |
|
2887 netif_err(nic, probe, nic->netdev, "Cannot map device registers, aborting\n"); |
|
2888 err = -ENOMEM; |
|
2889 goto err_out_free_res; |
|
2890 } |
|
2891 |
|
2892 if (ent->driver_data) |
|
2893 nic->flags |= ich; |
|
2894 else |
|
2895 nic->flags &= ~ich; |
|
2896 |
|
2897 e100_get_defaults(nic); |
|
2898 |
|
2899 /* D100 MAC doesn't allow rx of vlan packets with normal MTU */ |
|
2900 if (nic->mac < mac_82558_D101_A4) |
|
2901 netdev->features |= NETIF_F_VLAN_CHALLENGED; |
|
2902 |
|
2903 /* locks must be initialized before calling hw_reset */ |
|
2904 spin_lock_init(&nic->cb_lock); |
|
2905 spin_lock_init(&nic->cmd_lock); |
|
2906 spin_lock_init(&nic->mdio_lock); |
|
2907 |
|
2908 /* Reset the device before pci_set_master() in case device is in some |
|
2909 * funky state and has an interrupt pending - hint: we don't have the |
|
2910 * interrupt handler registered yet. */ |
|
2911 e100_hw_reset(nic); |
|
2912 |
|
2913 pci_set_master(pdev); |
|
2914 |
|
2915 init_timer(&nic->watchdog); |
|
2916 nic->watchdog.function = e100_watchdog; |
|
2917 nic->watchdog.data = (unsigned long)nic; |
|
2918 |
|
2919 INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task); |
|
2920 |
|
2921 if ((err = e100_alloc(nic))) { |
|
2922 netif_err(nic, probe, nic->netdev, "Cannot alloc driver memory, aborting\n"); |
|
2923 goto err_out_iounmap; |
|
2924 } |
|
2925 |
|
2926 if ((err = e100_eeprom_load(nic))) |
|
2927 goto err_out_free; |
|
2928 |
|
2929 e100_phy_init(nic); |
|
2930 |
|
2931 memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); |
|
2932 memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); |
|
2933 if (!is_valid_ether_addr(netdev->perm_addr)) { |
|
2934 if (!eeprom_bad_csum_allow) { |
|
2935 netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n"); |
|
2936 err = -EAGAIN; |
|
2937 goto err_out_free; |
|
2938 } else { |
|
2939 netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, you MUST configure one.\n"); |
|
2940 } |
|
2941 } |
|
2942 |
|
2943 /* Wol magic packet can be enabled from eeprom */ |
|
2944 if ((nic->mac >= mac_82558_D101_A4) && |
|
2945 (nic->eeprom[eeprom_id] & eeprom_id_wol)) { |
|
2946 nic->flags |= wol_magic; |
|
2947 device_set_wakeup_enable(&pdev->dev, true); |
|
2948 } |
|
2949 |
|
2950 /* ack any pending wake events, disable PME */ |
|
2951 pci_pme_active(pdev, false); |
|
2952 |
|
2953 strcpy(netdev->name, "eth%d"); |
|
2954 if ((err = register_netdev(netdev))) { |
|
2955 netif_err(nic, probe, nic->netdev, "Cannot register net device, aborting\n"); |
|
2956 goto err_out_free; |
|
2957 } |
|
2958 nic->cbs_pool = pci_pool_create(netdev->name, |
|
2959 nic->pdev, |
|
2960 nic->params.cbs.max * sizeof(struct cb), |
|
2961 sizeof(u32), |
|
2962 0); |
|
2963 netif_info(nic, probe, nic->netdev, |
|
2964 "addr 0x%llx, irq %d, MAC addr %pM\n", |
|
2965 (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), |
|
2966 pdev->irq, netdev->dev_addr); |
|
2967 |
|
2968 return 0; |
|
2969 |
|
2970 err_out_free: |
|
2971 e100_free(nic); |
|
2972 err_out_iounmap: |
|
2973 pci_iounmap(pdev, nic->csr); |
|
2974 err_out_free_res: |
|
2975 pci_release_regions(pdev); |
|
2976 err_out_disable_pdev: |
|
2977 pci_disable_device(pdev); |
|
2978 err_out_free_dev: |
|
2979 pci_set_drvdata(pdev, NULL); |
|
2980 free_netdev(netdev); |
|
2981 return err; |
|
2982 } |
|
2983 |
|
2984 static void __devexit e100_remove(struct pci_dev *pdev) |
|
2985 { |
|
2986 struct net_device *netdev = pci_get_drvdata(pdev); |
|
2987 |
|
2988 if (netdev) { |
|
2989 struct nic *nic = netdev_priv(netdev); |
|
2990 unregister_netdev(netdev); |
|
2991 e100_free(nic); |
|
2992 pci_iounmap(pdev, nic->csr); |
|
2993 pci_pool_destroy(nic->cbs_pool); |
|
2994 free_netdev(netdev); |
|
2995 pci_release_regions(pdev); |
|
2996 pci_disable_device(pdev); |
|
2997 pci_set_drvdata(pdev, NULL); |
|
2998 } |
|
2999 } |
|
3000 |
|
3001 #define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */ |
|
3002 #define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */ |
|
3003 #define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */ |
|
3004 static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake) |
|
3005 { |
|
3006 struct net_device *netdev = pci_get_drvdata(pdev); |
|
3007 struct nic *nic = netdev_priv(netdev); |
|
3008 |
|
3009 if (netif_running(netdev)) |
|
3010 e100_down(nic); |
|
3011 netif_device_detach(netdev); |
|
3012 |
|
3013 pci_save_state(pdev); |
|
3014 |
|
3015 if ((nic->flags & wol_magic) | e100_asf(nic)) { |
|
3016 /* enable reverse auto-negotiation */ |
|
3017 if (nic->phy == phy_82552_v) { |
|
3018 u16 smartspeed = mdio_read(netdev, nic->mii.phy_id, |
|
3019 E100_82552_SMARTSPEED); |
|
3020 |
|
3021 mdio_write(netdev, nic->mii.phy_id, |
|
3022 E100_82552_SMARTSPEED, smartspeed | |
|
3023 E100_82552_REV_ANEG | E100_82552_ANEG_NOW); |
|
3024 } |
|
3025 *enable_wake = true; |
|
3026 } else { |
|
3027 *enable_wake = false; |
|
3028 } |
|
3029 |
|
3030 pci_disable_device(pdev); |
|
3031 } |
|
3032 |
|
3033 static int __e100_power_off(struct pci_dev *pdev, bool wake) |
|
3034 { |
|
3035 if (wake) |
|
3036 return pci_prepare_to_sleep(pdev); |
|
3037 |
|
3038 pci_wake_from_d3(pdev, false); |
|
3039 pci_set_power_state(pdev, PCI_D3hot); |
|
3040 |
|
3041 return 0; |
|
3042 } |
|
3043 |
|
3044 #ifdef CONFIG_PM |
|
3045 static int e100_suspend(struct pci_dev *pdev, pm_message_t state) |
|
3046 { |
|
3047 bool wake; |
|
3048 __e100_shutdown(pdev, &wake); |
|
3049 return __e100_power_off(pdev, wake); |
|
3050 } |
|
3051 |
|
3052 static int e100_resume(struct pci_dev *pdev) |
|
3053 { |
|
3054 struct net_device *netdev = pci_get_drvdata(pdev); |
|
3055 struct nic *nic = netdev_priv(netdev); |
|
3056 |
|
3057 pci_set_power_state(pdev, PCI_D0); |
|
3058 pci_restore_state(pdev); |
|
3059 /* ack any pending wake events, disable PME */ |
|
3060 pci_enable_wake(pdev, 0, 0); |
|
3061 |
|
3062 /* disable reverse auto-negotiation */ |
|
3063 if (nic->phy == phy_82552_v) { |
|
3064 u16 smartspeed = mdio_read(netdev, nic->mii.phy_id, |
|
3065 E100_82552_SMARTSPEED); |
|
3066 |
|
3067 mdio_write(netdev, nic->mii.phy_id, |
|
3068 E100_82552_SMARTSPEED, |
|
3069 smartspeed & ~(E100_82552_REV_ANEG)); |
|
3070 } |
|
3071 |
|
3072 netif_device_attach(netdev); |
|
3073 if (netif_running(netdev)) |
|
3074 e100_up(nic); |
|
3075 |
|
3076 return 0; |
|
3077 } |
|
3078 #endif /* CONFIG_PM */ |
|
3079 |
|
3080 static void e100_shutdown(struct pci_dev *pdev) |
|
3081 { |
|
3082 bool wake; |
|
3083 __e100_shutdown(pdev, &wake); |
|
3084 if (system_state == SYSTEM_POWER_OFF) |
|
3085 __e100_power_off(pdev, wake); |
|
3086 } |
|
3087 |
|
3088 /* ------------------ PCI Error Recovery infrastructure -------------- */ |
|
3089 /** |
|
3090 * e100_io_error_detected - called when PCI error is detected. |
|
3091 * @pdev: Pointer to PCI device |
|
3092 * @state: The current pci connection state |
|
3093 */ |
|
3094 static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) |
|
3095 { |
|
3096 struct net_device *netdev = pci_get_drvdata(pdev); |
|
3097 struct nic *nic = netdev_priv(netdev); |
|
3098 |
|
3099 netif_device_detach(netdev); |
|
3100 |
|
3101 if (state == pci_channel_io_perm_failure) |
|
3102 return PCI_ERS_RESULT_DISCONNECT; |
|
3103 |
|
3104 if (netif_running(netdev)) |
|
3105 e100_down(nic); |
|
3106 pci_disable_device(pdev); |
|
3107 |
|
3108 /* Request a slot reset. */ |
|
3109 return PCI_ERS_RESULT_NEED_RESET; |
|
3110 } |
|
3111 |
|
3112 /** |
|
3113 * e100_io_slot_reset - called after the pci bus has been reset. |
|
3114 * @pdev: Pointer to PCI device |
|
3115 * |
|
3116 * Restart the card from scratch. |
|
3117 */ |
|
3118 static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev) |
|
3119 { |
|
3120 struct net_device *netdev = pci_get_drvdata(pdev); |
|
3121 struct nic *nic = netdev_priv(netdev); |
|
3122 |
|
3123 if (pci_enable_device(pdev)) { |
|
3124 pr_err("Cannot re-enable PCI device after reset\n"); |
|
3125 return PCI_ERS_RESULT_DISCONNECT; |
|
3126 } |
|
3127 pci_set_master(pdev); |
|
3128 |
|
3129 /* Only one device per card can do a reset */ |
|
3130 if (0 != PCI_FUNC(pdev->devfn)) |
|
3131 return PCI_ERS_RESULT_RECOVERED; |
|
3132 e100_hw_reset(nic); |
|
3133 e100_phy_init(nic); |
|
3134 |
|
3135 return PCI_ERS_RESULT_RECOVERED; |
|
3136 } |
|
3137 |
|
3138 /** |
|
3139 * e100_io_resume - resume normal operations |
|
3140 * @pdev: Pointer to PCI device |
|
3141 * |
|
3142 * Resume normal operations after an error recovery |
|
3143 * sequence has been completed. |
|
3144 */ |
|
3145 static void e100_io_resume(struct pci_dev *pdev) |
|
3146 { |
|
3147 struct net_device *netdev = pci_get_drvdata(pdev); |
|
3148 struct nic *nic = netdev_priv(netdev); |
|
3149 |
|
3150 /* ack any pending wake events, disable PME */ |
|
3151 pci_enable_wake(pdev, 0, 0); |
|
3152 |
|
3153 netif_device_attach(netdev); |
|
3154 if (netif_running(netdev)) { |
|
3155 e100_open(netdev); |
|
3156 mod_timer(&nic->watchdog, jiffies); |
|
3157 } |
|
3158 } |
|
3159 |
|
3160 static struct pci_error_handlers e100_err_handler = { |
|
3161 .error_detected = e100_io_error_detected, |
|
3162 .slot_reset = e100_io_slot_reset, |
|
3163 .resume = e100_io_resume, |
|
3164 }; |
|
3165 |
|
3166 static struct pci_driver e100_driver = { |
|
3167 .name = DRV_NAME, |
|
3168 .id_table = e100_id_table, |
|
3169 .probe = e100_probe, |
|
3170 .remove = __devexit_p(e100_remove), |
|
3171 #ifdef CONFIG_PM |
|
3172 /* Power Management hooks */ |
|
3173 .suspend = e100_suspend, |
|
3174 .resume = e100_resume, |
|
3175 #endif |
|
3176 .shutdown = e100_shutdown, |
|
3177 .err_handler = &e100_err_handler, |
|
3178 }; |
|
3179 |
|
3180 static int __init e100_init_module(void) |
|
3181 { |
|
3182 if (((1 << debug) - 1) & NETIF_MSG_DRV) { |
|
3183 pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); |
|
3184 pr_info("%s\n", DRV_COPYRIGHT); |
|
3185 } |
|
3186 return pci_register_driver(&e100_driver); |
|
3187 } |
|
3188 |
|
3189 static void __exit e100_cleanup_module(void) |
|
3190 { |
|
3191 pci_unregister_driver(&e100_driver); |
|
3192 } |
|
3193 |
|
3194 module_init(e100_init_module); |
|
3195 module_exit(e100_cleanup_module); |