script/ethercat.conf
branchstable-1.5
changeset 2690 d984f57bef97
parent 2561 4839e81d2bdd
equal deleted inserted replaced
2689:61c7f0681247 2690:d984f57bef97
    37 #MASTER0_BACKUP=""
    37 #MASTER0_BACKUP=""
    38 
    38 
    39 #
    39 #
    40 # Ethernet driver modules to use for EtherCAT operation.
    40 # Ethernet driver modules to use for EtherCAT operation.
    41 #
    41 #
    42 # Specify a non-empty list of Ethernet drivers, that shall be used for EtherCAT
    42 # Specify a non-empty list of Ethernet drivers, that shall be used for
    43 # operation.
    43 # EtherCAT operation.
    44 #
    44 #
    45 # Except for the generic Ethernet driver module, the init script will try to
    45 # Except for the generic Ethernet driver module, the init script will try to
    46 # unload the usual Ethernet driver modules in the list and replace them with
    46 # unload the usual Ethernet driver modules in the list and replace them with
    47 # the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not
    47 # the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not
    48 # found, a warning will appear.
    48 # found, a warning will appear.
    49 #
    49 #
    50 # Possible values: 8139too, e100, e1000, e1000e, r8169, generic, ccat.
    50 # Possible values: 8139too, e100, e1000, e1000e, r8169, generic, ccat, igb.
    51 # Separate multiple drivers with spaces.
    51 # Separate multiple drivers with spaces.
    52 #
    52 #
    53 # Note: The e100, e1000, e1000e, r8169 and ccat drivers are not built by
    53 # Note: The e100, e1000, e1000e, r8169, ccat and igb drivers are not built by
    54 # default. Enable them with the --enable-<driver> configure switches.
    54 # default. Enable them with the --enable-<driver> configure switches.
    55 #
    55 #
    56 # Attention: When using the generic driver, the corresponding Ethernet device
    56 # Attention: When using the generic driver, the corresponding Ethernet device
    57 # has to be activated (with OS methods, for example 'ip link set ethX up'),
    57 # has to be activated (with OS methods, for example 'ip link set ethX up'),
    58 # before the master is started, otherwise all frames will time out.
    58 # before the master is started, otherwise all frames will time out.