|
1 /******************************************************************************* |
|
2 |
|
3 |
|
4 Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms of the GNU General Public License as published by the Free |
|
8 Software Foundation; either version 2 of the License, or (at your option) |
|
9 any later version. |
|
10 |
|
11 This program is distributed in the hope that it will be useful, but WITHOUT |
|
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
14 more details. |
|
15 |
|
16 You should have received a copy of the GNU General Public License along with |
|
17 this program; if not, write to the Free Software Foundation, Inc., 59 |
|
18 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
|
19 |
|
20 The full GNU General Public License is included in this distribution in the |
|
21 file called LICENSE. |
|
22 |
|
23 Contact Information: |
|
24 Linux NICS <linux.nics@intel.com> |
|
25 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
26 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
27 |
|
28 *******************************************************************************/ |
|
29 |
|
30 #include "e1000.h" |
|
31 |
|
32 /* This is the only thing that needs to be changed to adjust the |
|
33 * maximum number of ports that the driver can manage. |
|
34 */ |
|
35 |
|
36 #define E1000_MAX_NIC 32 |
|
37 |
|
38 #define OPTION_UNSET -1 |
|
39 #define OPTION_DISABLED 0 |
|
40 #define OPTION_ENABLED 1 |
|
41 |
|
42 /* All parameters are treated the same, as an integer array of values. |
|
43 * This macro just reduces the need to repeat the same declaration code |
|
44 * over and over (plus this helps to avoid typo bugs). |
|
45 */ |
|
46 |
|
47 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } |
|
48 /* Module Parameters are always initialized to -1, so that the driver |
|
49 * can tell the difference between no user specified value or the |
|
50 * user asking for the default value. |
|
51 * The true default values are loaded in when e1000_check_options is called. |
|
52 * |
|
53 * This is a GCC extension to ANSI C. |
|
54 * See the item "Labeled Elements in Initializers" in the section |
|
55 * "Extensions to the C Language Family" of the GCC documentation. |
|
56 */ |
|
57 |
|
58 #define E1000_PARAM(X, desc) \ |
|
59 static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ |
|
60 static int num_##X = 0; \ |
|
61 module_param_array_named(X, X, int, &num_##X, 0); \ |
|
62 MODULE_PARM_DESC(X, desc); |
|
63 |
|
64 /* Transmit Descriptor Count |
|
65 * |
|
66 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers |
|
67 * Valid Range: 80-4096 for 82544 and newer |
|
68 * |
|
69 * Default Value: 256 |
|
70 */ |
|
71 |
|
72 E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); |
|
73 |
|
74 /* Receive Descriptor Count |
|
75 * |
|
76 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers |
|
77 * Valid Range: 80-4096 for 82544 and newer |
|
78 * |
|
79 * Default Value: 256 |
|
80 */ |
|
81 |
|
82 E1000_PARAM(RxDescriptors, "Number of receive descriptors"); |
|
83 |
|
84 /* User Specified Speed Override |
|
85 * |
|
86 * Valid Range: 0, 10, 100, 1000 |
|
87 * - 0 - auto-negotiate at all supported speeds |
|
88 * - 10 - only link at 10 Mbps |
|
89 * - 100 - only link at 100 Mbps |
|
90 * - 1000 - only link at 1000 Mbps |
|
91 * |
|
92 * Default Value: 0 |
|
93 */ |
|
94 |
|
95 E1000_PARAM(Speed, "Speed setting"); |
|
96 |
|
97 /* User Specified Duplex Override |
|
98 * |
|
99 * Valid Range: 0-2 |
|
100 * - 0 - auto-negotiate for duplex |
|
101 * - 1 - only link at half duplex |
|
102 * - 2 - only link at full duplex |
|
103 * |
|
104 * Default Value: 0 |
|
105 */ |
|
106 |
|
107 E1000_PARAM(Duplex, "Duplex setting"); |
|
108 |
|
109 /* Auto-negotiation Advertisement Override |
|
110 * |
|
111 * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber) |
|
112 * |
|
113 * The AutoNeg value is a bit mask describing which speed and duplex |
|
114 * combinations should be advertised during auto-negotiation. |
|
115 * The supported speed and duplex modes are listed below |
|
116 * |
|
117 * Bit 7 6 5 4 3 2 1 0 |
|
118 * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10 |
|
119 * Duplex Full Full Half Full Half |
|
120 * |
|
121 * Default Value: 0x2F (copper); 0x20 (fiber) |
|
122 */ |
|
123 |
|
124 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); |
|
125 |
|
126 /* User Specified Flow Control Override |
|
127 * |
|
128 * Valid Range: 0-3 |
|
129 * - 0 - No Flow Control |
|
130 * - 1 - Rx only, respond to PAUSE frames but do not generate them |
|
131 * - 2 - Tx only, generate PAUSE frames but ignore them on receive |
|
132 * - 3 - Full Flow Control Support |
|
133 * |
|
134 * Default Value: Read flow control settings from the EEPROM |
|
135 */ |
|
136 |
|
137 E1000_PARAM(FlowControl, "Flow Control setting"); |
|
138 |
|
139 /* XsumRX - Receive Checksum Offload Enable/Disable |
|
140 * |
|
141 * Valid Range: 0, 1 |
|
142 * - 0 - disables all checksum offload |
|
143 * - 1 - enables receive IP/TCP/UDP checksum offload |
|
144 * on 82543 and newer -based NICs |
|
145 * |
|
146 * Default Value: 1 |
|
147 */ |
|
148 |
|
149 E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); |
|
150 |
|
151 /* Transmit Interrupt Delay in units of 1.024 microseconds |
|
152 * |
|
153 * Valid Range: 0-65535 |
|
154 * |
|
155 * Default Value: 64 |
|
156 */ |
|
157 |
|
158 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); |
|
159 |
|
160 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds |
|
161 * |
|
162 * Valid Range: 0-65535 |
|
163 * |
|
164 * Default Value: 0 |
|
165 */ |
|
166 |
|
167 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); |
|
168 |
|
169 /* Receive Interrupt Delay in units of 1.024 microseconds |
|
170 * |
|
171 * Valid Range: 0-65535 |
|
172 * |
|
173 * Default Value: 0 |
|
174 */ |
|
175 |
|
176 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); |
|
177 |
|
178 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds |
|
179 * |
|
180 * Valid Range: 0-65535 |
|
181 * |
|
182 * Default Value: 128 |
|
183 */ |
|
184 |
|
185 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); |
|
186 |
|
187 /* Interrupt Throttle Rate (interrupts/sec) |
|
188 * |
|
189 * Valid Range: 100-100000 (0=off, 1=dynamic) |
|
190 * |
|
191 * Default Value: 8000 |
|
192 */ |
|
193 |
|
194 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); |
|
195 |
|
196 /* Enable Smart Power Down of the PHY |
|
197 * |
|
198 * Valid Range: 0, 1 |
|
199 * |
|
200 * Default Value: 0 (disabled) |
|
201 */ |
|
202 |
|
203 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); |
|
204 |
|
205 /* Enable Kumeran Lock Loss workaround |
|
206 * |
|
207 * Valid Range: 0, 1 |
|
208 * |
|
209 * Default Value: 1 (enabled) |
|
210 */ |
|
211 |
|
212 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); |
|
213 |
|
214 #define AUTONEG_ADV_DEFAULT 0x2F |
|
215 #define AUTONEG_ADV_MASK 0x2F |
|
216 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL |
|
217 |
|
218 #define DEFAULT_RDTR 0 |
|
219 #define MAX_RXDELAY 0xFFFF |
|
220 #define MIN_RXDELAY 0 |
|
221 |
|
222 #define DEFAULT_RADV 128 |
|
223 #define MAX_RXABSDELAY 0xFFFF |
|
224 #define MIN_RXABSDELAY 0 |
|
225 |
|
226 #define DEFAULT_TIDV 64 |
|
227 #define MAX_TXDELAY 0xFFFF |
|
228 #define MIN_TXDELAY 0 |
|
229 |
|
230 #define DEFAULT_TADV 64 |
|
231 #define MAX_TXABSDELAY 0xFFFF |
|
232 #define MIN_TXABSDELAY 0 |
|
233 |
|
234 #define DEFAULT_ITR 8000 |
|
235 #define MAX_ITR 100000 |
|
236 #define MIN_ITR 100 |
|
237 |
|
238 struct e1000_option { |
|
239 enum { enable_option, range_option, list_option } type; |
|
240 char *name; |
|
241 char *err; |
|
242 int def; |
|
243 union { |
|
244 struct { /* range_option info */ |
|
245 int min; |
|
246 int max; |
|
247 } r; |
|
248 struct { /* list_option info */ |
|
249 int nr; |
|
250 struct e1000_opt_list { int i; char *str; } *p; |
|
251 } l; |
|
252 } arg; |
|
253 }; |
|
254 |
|
255 static int __devinit |
|
256 e1000_validate_option(int *value, struct e1000_option *opt, |
|
257 struct e1000_adapter *adapter) |
|
258 { |
|
259 if (*value == OPTION_UNSET) { |
|
260 *value = opt->def; |
|
261 return 0; |
|
262 } |
|
263 |
|
264 switch (opt->type) { |
|
265 case enable_option: |
|
266 switch (*value) { |
|
267 case OPTION_ENABLED: |
|
268 DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name); |
|
269 return 0; |
|
270 case OPTION_DISABLED: |
|
271 DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name); |
|
272 return 0; |
|
273 } |
|
274 break; |
|
275 case range_option: |
|
276 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { |
|
277 DPRINTK(PROBE, INFO, |
|
278 "%s set to %i\n", opt->name, *value); |
|
279 return 0; |
|
280 } |
|
281 break; |
|
282 case list_option: { |
|
283 int i; |
|
284 struct e1000_opt_list *ent; |
|
285 |
|
286 for (i = 0; i < opt->arg.l.nr; i++) { |
|
287 ent = &opt->arg.l.p[i]; |
|
288 if (*value == ent->i) { |
|
289 if (ent->str[0] != '\0') |
|
290 DPRINTK(PROBE, INFO, "%s\n", ent->str); |
|
291 return 0; |
|
292 } |
|
293 } |
|
294 } |
|
295 break; |
|
296 default: |
|
297 BUG(); |
|
298 } |
|
299 |
|
300 DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n", |
|
301 opt->name, *value, opt->err); |
|
302 *value = opt->def; |
|
303 return -1; |
|
304 } |
|
305 |
|
306 static void e1000_check_fiber_options(struct e1000_adapter *adapter); |
|
307 static void e1000_check_copper_options(struct e1000_adapter *adapter); |
|
308 |
|
309 /** |
|
310 * e1000_check_options - Range Checking for Command Line Parameters |
|
311 * @adapter: board private structure |
|
312 * |
|
313 * This routine checks all command line parameters for valid user |
|
314 * input. If an invalid value is given, or if no user specified |
|
315 * value exists, a default value is used. The final value is stored |
|
316 * in a variable in the adapter structure. |
|
317 **/ |
|
318 |
|
319 void __devinit |
|
320 e1000_check_options(struct e1000_adapter *adapter) |
|
321 { |
|
322 int bd = adapter->bd_number; |
|
323 if (bd >= E1000_MAX_NIC) { |
|
324 DPRINTK(PROBE, NOTICE, |
|
325 "Warning: no configuration for board #%i\n", bd); |
|
326 DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); |
|
327 bd = E1000_MAX_NIC; |
|
328 } |
|
329 |
|
330 { /* Transmit Descriptor Count */ |
|
331 struct e1000_option opt = { |
|
332 .type = range_option, |
|
333 .name = "Transmit Descriptors", |
|
334 .err = "using default of " |
|
335 __MODULE_STRING(E1000_DEFAULT_TXD), |
|
336 .def = E1000_DEFAULT_TXD, |
|
337 .arg = { .r = { .min = E1000_MIN_TXD }} |
|
338 }; |
|
339 struct e1000_tx_ring *tx_ring = adapter->tx_ring; |
|
340 int i; |
|
341 e1000_mac_type mac_type = adapter->hw.mac_type; |
|
342 opt.arg.r.max = mac_type < e1000_82544 ? |
|
343 E1000_MAX_TXD : E1000_MAX_82544_TXD; |
|
344 |
|
345 tx_ring->count = TxDescriptors[bd]; |
|
346 e1000_validate_option(&tx_ring->count, &opt, adapter); |
|
347 E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); |
|
348 for (i = 0; i < adapter->num_tx_queues; i++) |
|
349 tx_ring[i].count = tx_ring->count; |
|
350 } |
|
351 { /* Receive Descriptor Count */ |
|
352 struct e1000_option opt = { |
|
353 .type = range_option, |
|
354 .name = "Receive Descriptors", |
|
355 .err = "using default of " |
|
356 __MODULE_STRING(E1000_DEFAULT_RXD), |
|
357 .def = E1000_DEFAULT_RXD, |
|
358 .arg = { .r = { .min = E1000_MIN_RXD }} |
|
359 }; |
|
360 struct e1000_rx_ring *rx_ring = adapter->rx_ring; |
|
361 int i; |
|
362 e1000_mac_type mac_type = adapter->hw.mac_type; |
|
363 opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : |
|
364 E1000_MAX_82544_RXD; |
|
365 |
|
366 rx_ring->count = RxDescriptors[bd]; |
|
367 e1000_validate_option(&rx_ring->count, &opt, adapter); |
|
368 E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); |
|
369 for (i = 0; i < adapter->num_rx_queues; i++) |
|
370 rx_ring[i].count = rx_ring->count; |
|
371 } |
|
372 { /* Checksum Offload Enable/Disable */ |
|
373 struct e1000_option opt = { |
|
374 .type = enable_option, |
|
375 .name = "Checksum Offload", |
|
376 .err = "defaulting to Enabled", |
|
377 .def = OPTION_ENABLED |
|
378 }; |
|
379 |
|
380 int rx_csum = XsumRX[bd]; |
|
381 e1000_validate_option(&rx_csum, &opt, adapter); |
|
382 adapter->rx_csum = rx_csum; |
|
383 } |
|
384 { /* Flow Control */ |
|
385 |
|
386 struct e1000_opt_list fc_list[] = |
|
387 {{ e1000_fc_none, "Flow Control Disabled" }, |
|
388 { e1000_fc_rx_pause,"Flow Control Receive Only" }, |
|
389 { e1000_fc_tx_pause,"Flow Control Transmit Only" }, |
|
390 { e1000_fc_full, "Flow Control Enabled" }, |
|
391 { e1000_fc_default, "Flow Control Hardware Default" }}; |
|
392 |
|
393 struct e1000_option opt = { |
|
394 .type = list_option, |
|
395 .name = "Flow Control", |
|
396 .err = "reading default settings from EEPROM", |
|
397 .def = e1000_fc_default, |
|
398 .arg = { .l = { .nr = ARRAY_SIZE(fc_list), |
|
399 .p = fc_list }} |
|
400 }; |
|
401 |
|
402 int fc = FlowControl[bd]; |
|
403 e1000_validate_option(&fc, &opt, adapter); |
|
404 adapter->hw.fc = adapter->hw.original_fc = fc; |
|
405 } |
|
406 { /* Transmit Interrupt Delay */ |
|
407 struct e1000_option opt = { |
|
408 .type = range_option, |
|
409 .name = "Transmit Interrupt Delay", |
|
410 .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), |
|
411 .def = DEFAULT_TIDV, |
|
412 .arg = { .r = { .min = MIN_TXDELAY, |
|
413 .max = MAX_TXDELAY }} |
|
414 }; |
|
415 |
|
416 adapter->tx_int_delay = TxIntDelay[bd]; |
|
417 e1000_validate_option(&adapter->tx_int_delay, &opt, adapter); |
|
418 } |
|
419 { /* Transmit Absolute Interrupt Delay */ |
|
420 struct e1000_option opt = { |
|
421 .type = range_option, |
|
422 .name = "Transmit Absolute Interrupt Delay", |
|
423 .err = "using default of " __MODULE_STRING(DEFAULT_TADV), |
|
424 .def = DEFAULT_TADV, |
|
425 .arg = { .r = { .min = MIN_TXABSDELAY, |
|
426 .max = MAX_TXABSDELAY }} |
|
427 }; |
|
428 |
|
429 adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; |
|
430 e1000_validate_option(&adapter->tx_abs_int_delay, &opt, |
|
431 adapter); |
|
432 } |
|
433 { /* Receive Interrupt Delay */ |
|
434 struct e1000_option opt = { |
|
435 .type = range_option, |
|
436 .name = "Receive Interrupt Delay", |
|
437 .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), |
|
438 .def = DEFAULT_RDTR, |
|
439 .arg = { .r = { .min = MIN_RXDELAY, |
|
440 .max = MAX_RXDELAY }} |
|
441 }; |
|
442 |
|
443 adapter->rx_int_delay = RxIntDelay[bd]; |
|
444 e1000_validate_option(&adapter->rx_int_delay, &opt, adapter); |
|
445 } |
|
446 { /* Receive Absolute Interrupt Delay */ |
|
447 struct e1000_option opt = { |
|
448 .type = range_option, |
|
449 .name = "Receive Absolute Interrupt Delay", |
|
450 .err = "using default of " __MODULE_STRING(DEFAULT_RADV), |
|
451 .def = DEFAULT_RADV, |
|
452 .arg = { .r = { .min = MIN_RXABSDELAY, |
|
453 .max = MAX_RXABSDELAY }} |
|
454 }; |
|
455 |
|
456 adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; |
|
457 e1000_validate_option(&adapter->rx_abs_int_delay, &opt, |
|
458 adapter); |
|
459 } |
|
460 { /* Interrupt Throttling Rate */ |
|
461 struct e1000_option opt = { |
|
462 .type = range_option, |
|
463 .name = "Interrupt Throttling Rate (ints/sec)", |
|
464 .err = "using default of " __MODULE_STRING(DEFAULT_ITR), |
|
465 .def = DEFAULT_ITR, |
|
466 .arg = { .r = { .min = MIN_ITR, |
|
467 .max = MAX_ITR }} |
|
468 }; |
|
469 |
|
470 adapter->itr = InterruptThrottleRate[bd]; |
|
471 switch (adapter->itr) { |
|
472 case 0: |
|
473 DPRINTK(PROBE, INFO, "%s turned off\n", opt.name); |
|
474 break; |
|
475 case 1: |
|
476 DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", |
|
477 opt.name); |
|
478 break; |
|
479 default: |
|
480 e1000_validate_option(&adapter->itr, &opt, adapter); |
|
481 break; |
|
482 } |
|
483 } |
|
484 { /* Smart Power Down */ |
|
485 struct e1000_option opt = { |
|
486 .type = enable_option, |
|
487 .name = "PHY Smart Power Down", |
|
488 .err = "defaulting to Disabled", |
|
489 .def = OPTION_DISABLED |
|
490 }; |
|
491 |
|
492 int spd = SmartPowerDownEnable[bd]; |
|
493 e1000_validate_option(&spd, &opt, adapter); |
|
494 adapter->smart_power_down = spd; |
|
495 } |
|
496 { /* Kumeran Lock Loss Workaround */ |
|
497 struct e1000_option opt = { |
|
498 .type = enable_option, |
|
499 .name = "Kumeran Lock Loss Workaround", |
|
500 .err = "defaulting to Enabled", |
|
501 .def = OPTION_ENABLED |
|
502 }; |
|
503 |
|
504 int kmrn_lock_loss = KumeranLockLoss[bd]; |
|
505 e1000_validate_option(&kmrn_lock_loss, &opt, adapter); |
|
506 adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss; |
|
507 } |
|
508 |
|
509 switch (adapter->hw.media_type) { |
|
510 case e1000_media_type_fiber: |
|
511 case e1000_media_type_internal_serdes: |
|
512 e1000_check_fiber_options(adapter); |
|
513 break; |
|
514 case e1000_media_type_copper: |
|
515 e1000_check_copper_options(adapter); |
|
516 break; |
|
517 default: |
|
518 BUG(); |
|
519 } |
|
520 } |
|
521 |
|
522 /** |
|
523 * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version |
|
524 * @adapter: board private structure |
|
525 * |
|
526 * Handles speed and duplex options on fiber adapters |
|
527 **/ |
|
528 |
|
529 static void __devinit |
|
530 e1000_check_fiber_options(struct e1000_adapter *adapter) |
|
531 { |
|
532 int bd = adapter->bd_number; |
|
533 bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; |
|
534 if ((Speed[bd] != OPTION_UNSET)) { |
|
535 DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, " |
|
536 "parameter ignored\n"); |
|
537 } |
|
538 |
|
539 if ((Duplex[bd] != OPTION_UNSET)) { |
|
540 DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, " |
|
541 "parameter ignored\n"); |
|
542 } |
|
543 |
|
544 if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) { |
|
545 DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is " |
|
546 "not valid for fiber adapters, " |
|
547 "parameter ignored\n"); |
|
548 } |
|
549 } |
|
550 |
|
551 /** |
|
552 * e1000_check_copper_options - Range Checking for Link Options, Copper Version |
|
553 * @adapter: board private structure |
|
554 * |
|
555 * Handles speed and duplex options on copper adapters |
|
556 **/ |
|
557 |
|
558 static void __devinit |
|
559 e1000_check_copper_options(struct e1000_adapter *adapter) |
|
560 { |
|
561 int speed, dplx, an; |
|
562 int bd = adapter->bd_number; |
|
563 bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd; |
|
564 |
|
565 { /* Speed */ |
|
566 struct e1000_opt_list speed_list[] = {{ 0, "" }, |
|
567 { SPEED_10, "" }, |
|
568 { SPEED_100, "" }, |
|
569 { SPEED_1000, "" }}; |
|
570 |
|
571 struct e1000_option opt = { |
|
572 .type = list_option, |
|
573 .name = "Speed", |
|
574 .err = "parameter ignored", |
|
575 .def = 0, |
|
576 .arg = { .l = { .nr = ARRAY_SIZE(speed_list), |
|
577 .p = speed_list }} |
|
578 }; |
|
579 |
|
580 speed = Speed[bd]; |
|
581 e1000_validate_option(&speed, &opt, adapter); |
|
582 } |
|
583 { /* Duplex */ |
|
584 struct e1000_opt_list dplx_list[] = {{ 0, "" }, |
|
585 { HALF_DUPLEX, "" }, |
|
586 { FULL_DUPLEX, "" }}; |
|
587 |
|
588 struct e1000_option opt = { |
|
589 .type = list_option, |
|
590 .name = "Duplex", |
|
591 .err = "parameter ignored", |
|
592 .def = 0, |
|
593 .arg = { .l = { .nr = ARRAY_SIZE(dplx_list), |
|
594 .p = dplx_list }} |
|
595 }; |
|
596 |
|
597 if (e1000_check_phy_reset_block(&adapter->hw)) { |
|
598 DPRINTK(PROBE, INFO, |
|
599 "Link active due to SoL/IDER Session. " |
|
600 "Speed/Duplex/AutoNeg parameter ignored.\n"); |
|
601 return; |
|
602 } |
|
603 dplx = Duplex[bd]; |
|
604 e1000_validate_option(&dplx, &opt, adapter); |
|
605 } |
|
606 |
|
607 if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) { |
|
608 DPRINTK(PROBE, INFO, |
|
609 "AutoNeg specified along with Speed or Duplex, " |
|
610 "parameter ignored\n"); |
|
611 adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; |
|
612 } else { /* Autoneg */ |
|
613 struct e1000_opt_list an_list[] = |
|
614 #define AA "AutoNeg advertising " |
|
615 {{ 0x01, AA "10/HD" }, |
|
616 { 0x02, AA "10/FD" }, |
|
617 { 0x03, AA "10/FD, 10/HD" }, |
|
618 { 0x04, AA "100/HD" }, |
|
619 { 0x05, AA "100/HD, 10/HD" }, |
|
620 { 0x06, AA "100/HD, 10/FD" }, |
|
621 { 0x07, AA "100/HD, 10/FD, 10/HD" }, |
|
622 { 0x08, AA "100/FD" }, |
|
623 { 0x09, AA "100/FD, 10/HD" }, |
|
624 { 0x0a, AA "100/FD, 10/FD" }, |
|
625 { 0x0b, AA "100/FD, 10/FD, 10/HD" }, |
|
626 { 0x0c, AA "100/FD, 100/HD" }, |
|
627 { 0x0d, AA "100/FD, 100/HD, 10/HD" }, |
|
628 { 0x0e, AA "100/FD, 100/HD, 10/FD" }, |
|
629 { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" }, |
|
630 { 0x20, AA "1000/FD" }, |
|
631 { 0x21, AA "1000/FD, 10/HD" }, |
|
632 { 0x22, AA "1000/FD, 10/FD" }, |
|
633 { 0x23, AA "1000/FD, 10/FD, 10/HD" }, |
|
634 { 0x24, AA "1000/FD, 100/HD" }, |
|
635 { 0x25, AA "1000/FD, 100/HD, 10/HD" }, |
|
636 { 0x26, AA "1000/FD, 100/HD, 10/FD" }, |
|
637 { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" }, |
|
638 { 0x28, AA "1000/FD, 100/FD" }, |
|
639 { 0x29, AA "1000/FD, 100/FD, 10/HD" }, |
|
640 { 0x2a, AA "1000/FD, 100/FD, 10/FD" }, |
|
641 { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" }, |
|
642 { 0x2c, AA "1000/FD, 100/FD, 100/HD" }, |
|
643 { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" }, |
|
644 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" }, |
|
645 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }}; |
|
646 |
|
647 struct e1000_option opt = { |
|
648 .type = list_option, |
|
649 .name = "AutoNeg", |
|
650 .err = "parameter ignored", |
|
651 .def = AUTONEG_ADV_DEFAULT, |
|
652 .arg = { .l = { .nr = ARRAY_SIZE(an_list), |
|
653 .p = an_list }} |
|
654 }; |
|
655 |
|
656 an = AutoNeg[bd]; |
|
657 e1000_validate_option(&an, &opt, adapter); |
|
658 adapter->hw.autoneg_advertised = an; |
|
659 } |
|
660 |
|
661 switch (speed + dplx) { |
|
662 case 0: |
|
663 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
664 if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET) |
|
665 DPRINTK(PROBE, INFO, |
|
666 "Speed and duplex autonegotiation enabled\n"); |
|
667 break; |
|
668 case HALF_DUPLEX: |
|
669 DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n"); |
|
670 DPRINTK(PROBE, INFO, "Using Autonegotiation at " |
|
671 "Half Duplex only\n"); |
|
672 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
673 adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | |
|
674 ADVERTISE_100_HALF; |
|
675 break; |
|
676 case FULL_DUPLEX: |
|
677 DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n"); |
|
678 DPRINTK(PROBE, INFO, "Using Autonegotiation at " |
|
679 "Full Duplex only\n"); |
|
680 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
681 adapter->hw.autoneg_advertised = ADVERTISE_10_FULL | |
|
682 ADVERTISE_100_FULL | |
|
683 ADVERTISE_1000_FULL; |
|
684 break; |
|
685 case SPEED_10: |
|
686 DPRINTK(PROBE, INFO, "10 Mbps Speed specified " |
|
687 "without Duplex\n"); |
|
688 DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n"); |
|
689 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
690 adapter->hw.autoneg_advertised = ADVERTISE_10_HALF | |
|
691 ADVERTISE_10_FULL; |
|
692 break; |
|
693 case SPEED_10 + HALF_DUPLEX: |
|
694 DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n"); |
|
695 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
696 adapter->hw.forced_speed_duplex = e1000_10_half; |
|
697 adapter->hw.autoneg_advertised = 0; |
|
698 break; |
|
699 case SPEED_10 + FULL_DUPLEX: |
|
700 DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n"); |
|
701 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
702 adapter->hw.forced_speed_duplex = e1000_10_full; |
|
703 adapter->hw.autoneg_advertised = 0; |
|
704 break; |
|
705 case SPEED_100: |
|
706 DPRINTK(PROBE, INFO, "100 Mbps Speed specified " |
|
707 "without Duplex\n"); |
|
708 DPRINTK(PROBE, INFO, "Using Autonegotiation at " |
|
709 "100 Mbps only\n"); |
|
710 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
711 adapter->hw.autoneg_advertised = ADVERTISE_100_HALF | |
|
712 ADVERTISE_100_FULL; |
|
713 break; |
|
714 case SPEED_100 + HALF_DUPLEX: |
|
715 DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n"); |
|
716 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
717 adapter->hw.forced_speed_duplex = e1000_100_half; |
|
718 adapter->hw.autoneg_advertised = 0; |
|
719 break; |
|
720 case SPEED_100 + FULL_DUPLEX: |
|
721 DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n"); |
|
722 adapter->hw.autoneg = adapter->fc_autoneg = 0; |
|
723 adapter->hw.forced_speed_duplex = e1000_100_full; |
|
724 adapter->hw.autoneg_advertised = 0; |
|
725 break; |
|
726 case SPEED_1000: |
|
727 DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without " |
|
728 "Duplex\n"); |
|
729 DPRINTK(PROBE, INFO, |
|
730 "Using Autonegotiation at 1000 Mbps " |
|
731 "Full Duplex only\n"); |
|
732 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
733 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; |
|
734 break; |
|
735 case SPEED_1000 + HALF_DUPLEX: |
|
736 DPRINTK(PROBE, INFO, |
|
737 "Half Duplex is not supported at 1000 Mbps\n"); |
|
738 DPRINTK(PROBE, INFO, |
|
739 "Using Autonegotiation at 1000 Mbps " |
|
740 "Full Duplex only\n"); |
|
741 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
742 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; |
|
743 break; |
|
744 case SPEED_1000 + FULL_DUPLEX: |
|
745 DPRINTK(PROBE, INFO, |
|
746 "Using Autonegotiation at 1000 Mbps Full Duplex only\n"); |
|
747 adapter->hw.autoneg = adapter->fc_autoneg = 1; |
|
748 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; |
|
749 break; |
|
750 default: |
|
751 BUG(); |
|
752 } |
|
753 |
|
754 /* Speed, AutoNeg and MDI/MDI-X must all play nice */ |
|
755 if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) { |
|
756 DPRINTK(PROBE, INFO, |
|
757 "Speed, AutoNeg and MDI-X specifications are " |
|
758 "incompatible. Setting MDI-X to a compatible value.\n"); |
|
759 } |
|
760 } |
|
761 |