|
1 /******************************************************************************* |
|
2 |
|
3 Intel PRO/1000 Linux driver |
|
4 Copyright(c) 1999 - 2013 Intel Corporation. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms and conditions of the GNU General Public License, |
|
8 version 2, as published by the Free Software Foundation. |
|
9 |
|
10 This program is distributed in the hope it will be useful, but WITHOUT |
|
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
13 more details. |
|
14 |
|
15 You should have received a copy of the GNU General Public License along with |
|
16 this program; if not, write to the Free Software Foundation, Inc., |
|
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
|
18 |
|
19 The full GNU General Public License is included in this distribution in |
|
20 the file called "COPYING". |
|
21 |
|
22 Contact Information: |
|
23 Linux NICS <linux.nics@intel.com> |
|
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
26 |
|
27 *******************************************************************************/ |
|
28 |
|
29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
|
30 |
|
31 #include <linux/module.h> |
|
32 #include <linux/types.h> |
|
33 #include <linux/init.h> |
|
34 #include <linux/pci.h> |
|
35 #include <linux/vmalloc.h> |
|
36 #include <linux/pagemap.h> |
|
37 #include <linux/delay.h> |
|
38 #include <linux/netdevice.h> |
|
39 #include <linux/interrupt.h> |
|
40 #include <linux/tcp.h> |
|
41 #include <linux/ipv6.h> |
|
42 #include <linux/slab.h> |
|
43 #include <net/checksum.h> |
|
44 #include <net/ip6_checksum.h> |
|
45 #include <linux/ethtool.h> |
|
46 #include <linux/if_vlan.h> |
|
47 #include <linux/cpu.h> |
|
48 #include <linux/smp.h> |
|
49 #include <linux/pm_qos.h> |
|
50 #include <linux/pm_runtime.h> |
|
51 #include <linux/aer.h> |
|
52 #include <linux/prefetch.h> |
|
53 |
|
54 #include "e1000.h" |
|
55 |
|
56 #define DRV_EXTRAVERSION "-k" |
|
57 |
|
58 #define DRV_VERSION "2.3.2" DRV_EXTRAVERSION |
|
59 char e1000e_driver_name[] = "e1000e"; |
|
60 const char e1000e_driver_version[] = DRV_VERSION; |
|
61 |
|
62 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) |
|
63 static int debug = -1; |
|
64 module_param(debug, int, 0); |
|
65 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
|
66 |
|
67 static const struct e1000_info *e1000_info_tbl[] = { |
|
68 [board_82571] = &e1000_82571_info, |
|
69 [board_82572] = &e1000_82572_info, |
|
70 [board_82573] = &e1000_82573_info, |
|
71 [board_82574] = &e1000_82574_info, |
|
72 [board_82583] = &e1000_82583_info, |
|
73 [board_80003es2lan] = &e1000_es2_info, |
|
74 [board_ich8lan] = &e1000_ich8_info, |
|
75 [board_ich9lan] = &e1000_ich9_info, |
|
76 [board_ich10lan] = &e1000_ich10_info, |
|
77 [board_pchlan] = &e1000_pch_info, |
|
78 [board_pch2lan] = &e1000_pch2_info, |
|
79 [board_pch_lpt] = &e1000_pch_lpt_info, |
|
80 }; |
|
81 |
|
82 struct e1000_reg_info { |
|
83 u32 ofs; |
|
84 char *name; |
|
85 }; |
|
86 |
|
87 static const struct e1000_reg_info e1000_reg_info_tbl[] = { |
|
88 /* General Registers */ |
|
89 {E1000_CTRL, "CTRL"}, |
|
90 {E1000_STATUS, "STATUS"}, |
|
91 {E1000_CTRL_EXT, "CTRL_EXT"}, |
|
92 |
|
93 /* Interrupt Registers */ |
|
94 {E1000_ICR, "ICR"}, |
|
95 |
|
96 /* Rx Registers */ |
|
97 {E1000_RCTL, "RCTL"}, |
|
98 {E1000_RDLEN(0), "RDLEN"}, |
|
99 {E1000_RDH(0), "RDH"}, |
|
100 {E1000_RDT(0), "RDT"}, |
|
101 {E1000_RDTR, "RDTR"}, |
|
102 {E1000_RXDCTL(0), "RXDCTL"}, |
|
103 {E1000_ERT, "ERT"}, |
|
104 {E1000_RDBAL(0), "RDBAL"}, |
|
105 {E1000_RDBAH(0), "RDBAH"}, |
|
106 {E1000_RDFH, "RDFH"}, |
|
107 {E1000_RDFT, "RDFT"}, |
|
108 {E1000_RDFHS, "RDFHS"}, |
|
109 {E1000_RDFTS, "RDFTS"}, |
|
110 {E1000_RDFPC, "RDFPC"}, |
|
111 |
|
112 /* Tx Registers */ |
|
113 {E1000_TCTL, "TCTL"}, |
|
114 {E1000_TDBAL(0), "TDBAL"}, |
|
115 {E1000_TDBAH(0), "TDBAH"}, |
|
116 {E1000_TDLEN(0), "TDLEN"}, |
|
117 {E1000_TDH(0), "TDH"}, |
|
118 {E1000_TDT(0), "TDT"}, |
|
119 {E1000_TIDV, "TIDV"}, |
|
120 {E1000_TXDCTL(0), "TXDCTL"}, |
|
121 {E1000_TADV, "TADV"}, |
|
122 {E1000_TARC(0), "TARC"}, |
|
123 {E1000_TDFH, "TDFH"}, |
|
124 {E1000_TDFT, "TDFT"}, |
|
125 {E1000_TDFHS, "TDFHS"}, |
|
126 {E1000_TDFTS, "TDFTS"}, |
|
127 {E1000_TDFPC, "TDFPC"}, |
|
128 |
|
129 /* List Terminator */ |
|
130 {0, NULL} |
|
131 }; |
|
132 |
|
133 /** |
|
134 * e1000_regdump - register printout routine |
|
135 * @hw: pointer to the HW structure |
|
136 * @reginfo: pointer to the register info table |
|
137 **/ |
|
138 static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) |
|
139 { |
|
140 int n = 0; |
|
141 char rname[16]; |
|
142 u32 regs[8]; |
|
143 |
|
144 switch (reginfo->ofs) { |
|
145 case E1000_RXDCTL(0): |
|
146 for (n = 0; n < 2; n++) |
|
147 regs[n] = __er32(hw, E1000_RXDCTL(n)); |
|
148 break; |
|
149 case E1000_TXDCTL(0): |
|
150 for (n = 0; n < 2; n++) |
|
151 regs[n] = __er32(hw, E1000_TXDCTL(n)); |
|
152 break; |
|
153 case E1000_TARC(0): |
|
154 for (n = 0; n < 2; n++) |
|
155 regs[n] = __er32(hw, E1000_TARC(n)); |
|
156 break; |
|
157 default: |
|
158 pr_info("%-15s %08x\n", |
|
159 reginfo->name, __er32(hw, reginfo->ofs)); |
|
160 return; |
|
161 } |
|
162 |
|
163 snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]"); |
|
164 pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]); |
|
165 } |
|
166 |
|
167 static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, |
|
168 struct e1000_buffer *bi) |
|
169 { |
|
170 int i; |
|
171 struct e1000_ps_page *ps_page; |
|
172 |
|
173 for (i = 0; i < adapter->rx_ps_pages; i++) { |
|
174 ps_page = &bi->ps_pages[i]; |
|
175 |
|
176 if (ps_page->page) { |
|
177 pr_info("packet dump for ps_page %d:\n", i); |
|
178 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, |
|
179 16, 1, page_address(ps_page->page), |
|
180 PAGE_SIZE, true); |
|
181 } |
|
182 } |
|
183 } |
|
184 |
|
185 /** |
|
186 * e1000e_dump - Print registers, Tx-ring and Rx-ring |
|
187 * @adapter: board private structure |
|
188 **/ |
|
189 static void e1000e_dump(struct e1000_adapter *adapter) |
|
190 { |
|
191 struct net_device *netdev = adapter->netdev; |
|
192 struct e1000_hw *hw = &adapter->hw; |
|
193 struct e1000_reg_info *reginfo; |
|
194 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
195 struct e1000_tx_desc *tx_desc; |
|
196 struct my_u0 { |
|
197 __le64 a; |
|
198 __le64 b; |
|
199 } *u0; |
|
200 struct e1000_buffer *buffer_info; |
|
201 struct e1000_ring *rx_ring = adapter->rx_ring; |
|
202 union e1000_rx_desc_packet_split *rx_desc_ps; |
|
203 union e1000_rx_desc_extended *rx_desc; |
|
204 struct my_u1 { |
|
205 __le64 a; |
|
206 __le64 b; |
|
207 __le64 c; |
|
208 __le64 d; |
|
209 } *u1; |
|
210 u32 staterr; |
|
211 int i = 0; |
|
212 |
|
213 if (!netif_msg_hw(adapter)) |
|
214 return; |
|
215 |
|
216 /* Print netdevice Info */ |
|
217 if (netdev) { |
|
218 dev_info(&adapter->pdev->dev, "Net device Info\n"); |
|
219 pr_info("Device Name state trans_start last_rx\n"); |
|
220 pr_info("%-15s %016lX %016lX %016lX\n", netdev->name, |
|
221 netdev->state, netdev->trans_start, netdev->last_rx); |
|
222 } |
|
223 |
|
224 /* Print Registers */ |
|
225 dev_info(&adapter->pdev->dev, "Register Dump\n"); |
|
226 pr_info(" Register Name Value\n"); |
|
227 for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl; |
|
228 reginfo->name; reginfo++) { |
|
229 e1000_regdump(hw, reginfo); |
|
230 } |
|
231 |
|
232 /* Print Tx Ring Summary */ |
|
233 if (!netdev || !netif_running(netdev)) |
|
234 return; |
|
235 |
|
236 dev_info(&adapter->pdev->dev, "Tx Ring Summary\n"); |
|
237 pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n"); |
|
238 buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean]; |
|
239 pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n", |
|
240 0, tx_ring->next_to_use, tx_ring->next_to_clean, |
|
241 (unsigned long long)buffer_info->dma, |
|
242 buffer_info->length, |
|
243 buffer_info->next_to_watch, |
|
244 (unsigned long long)buffer_info->time_stamp); |
|
245 |
|
246 /* Print Tx Ring */ |
|
247 if (!netif_msg_tx_done(adapter)) |
|
248 goto rx_ring_summary; |
|
249 |
|
250 dev_info(&adapter->pdev->dev, "Tx Ring Dump\n"); |
|
251 |
|
252 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) |
|
253 * |
|
254 * Legacy Transmit Descriptor |
|
255 * +--------------------------------------------------------------+ |
|
256 * 0 | Buffer Address [63:0] (Reserved on Write Back) | |
|
257 * +--------------------------------------------------------------+ |
|
258 * 8 | Special | CSS | Status | CMD | CSO | Length | |
|
259 * +--------------------------------------------------------------+ |
|
260 * 63 48 47 36 35 32 31 24 23 16 15 0 |
|
261 * |
|
262 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload |
|
263 * 63 48 47 40 39 32 31 16 15 8 7 0 |
|
264 * +----------------------------------------------------------------+ |
|
265 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS | |
|
266 * +----------------------------------------------------------------+ |
|
267 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN | |
|
268 * +----------------------------------------------------------------+ |
|
269 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 |
|
270 * |
|
271 * Extended Data Descriptor (DTYP=0x1) |
|
272 * +----------------------------------------------------------------+ |
|
273 * 0 | Buffer Address [63:0] | |
|
274 * +----------------------------------------------------------------+ |
|
275 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN | |
|
276 * +----------------------------------------------------------------+ |
|
277 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 |
|
278 */ |
|
279 pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n"); |
|
280 pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n"); |
|
281 pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n"); |
|
282 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { |
|
283 const char *next_desc; |
|
284 tx_desc = E1000_TX_DESC(*tx_ring, i); |
|
285 buffer_info = &tx_ring->buffer_info[i]; |
|
286 u0 = (struct my_u0 *)tx_desc; |
|
287 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean) |
|
288 next_desc = " NTC/U"; |
|
289 else if (i == tx_ring->next_to_use) |
|
290 next_desc = " NTU"; |
|
291 else if (i == tx_ring->next_to_clean) |
|
292 next_desc = " NTC"; |
|
293 else |
|
294 next_desc = ""; |
|
295 pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n", |
|
296 (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' : |
|
297 ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), |
|
298 i, |
|
299 (unsigned long long)le64_to_cpu(u0->a), |
|
300 (unsigned long long)le64_to_cpu(u0->b), |
|
301 (unsigned long long)buffer_info->dma, |
|
302 buffer_info->length, buffer_info->next_to_watch, |
|
303 (unsigned long long)buffer_info->time_stamp, |
|
304 buffer_info->skb, next_desc); |
|
305 |
|
306 if (netif_msg_pktdata(adapter) && buffer_info->skb) |
|
307 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, |
|
308 16, 1, buffer_info->skb->data, |
|
309 buffer_info->skb->len, true); |
|
310 } |
|
311 |
|
312 /* Print Rx Ring Summary */ |
|
313 rx_ring_summary: |
|
314 dev_info(&adapter->pdev->dev, "Rx Ring Summary\n"); |
|
315 pr_info("Queue [NTU] [NTC]\n"); |
|
316 pr_info(" %5d %5X %5X\n", |
|
317 0, rx_ring->next_to_use, rx_ring->next_to_clean); |
|
318 |
|
319 /* Print Rx Ring */ |
|
320 if (!netif_msg_rx_status(adapter)) |
|
321 return; |
|
322 |
|
323 dev_info(&adapter->pdev->dev, "Rx Ring Dump\n"); |
|
324 switch (adapter->rx_ps_pages) { |
|
325 case 1: |
|
326 case 2: |
|
327 case 3: |
|
328 /* [Extended] Packet Split Receive Descriptor Format |
|
329 * |
|
330 * +-----------------------------------------------------+ |
|
331 * 0 | Buffer Address 0 [63:0] | |
|
332 * +-----------------------------------------------------+ |
|
333 * 8 | Buffer Address 1 [63:0] | |
|
334 * +-----------------------------------------------------+ |
|
335 * 16 | Buffer Address 2 [63:0] | |
|
336 * +-----------------------------------------------------+ |
|
337 * 24 | Buffer Address 3 [63:0] | |
|
338 * +-----------------------------------------------------+ |
|
339 */ |
|
340 pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n"); |
|
341 /* [Extended] Receive Descriptor (Write-Back) Format |
|
342 * |
|
343 * 63 48 47 32 31 13 12 8 7 4 3 0 |
|
344 * +------------------------------------------------------+ |
|
345 * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS | |
|
346 * | Checksum | Ident | | Queue | | Type | |
|
347 * +------------------------------------------------------+ |
|
348 * 8 | VLAN Tag | Length | Extended Error | Extended Status | |
|
349 * +------------------------------------------------------+ |
|
350 * 63 48 47 32 31 20 19 0 |
|
351 */ |
|
352 pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n"); |
|
353 for (i = 0; i < rx_ring->count; i++) { |
|
354 const char *next_desc; |
|
355 buffer_info = &rx_ring->buffer_info[i]; |
|
356 rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i); |
|
357 u1 = (struct my_u1 *)rx_desc_ps; |
|
358 staterr = |
|
359 le32_to_cpu(rx_desc_ps->wb.middle.status_error); |
|
360 |
|
361 if (i == rx_ring->next_to_use) |
|
362 next_desc = " NTU"; |
|
363 else if (i == rx_ring->next_to_clean) |
|
364 next_desc = " NTC"; |
|
365 else |
|
366 next_desc = ""; |
|
367 |
|
368 if (staterr & E1000_RXD_STAT_DD) { |
|
369 /* Descriptor Done */ |
|
370 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n", |
|
371 "RWB", i, |
|
372 (unsigned long long)le64_to_cpu(u1->a), |
|
373 (unsigned long long)le64_to_cpu(u1->b), |
|
374 (unsigned long long)le64_to_cpu(u1->c), |
|
375 (unsigned long long)le64_to_cpu(u1->d), |
|
376 buffer_info->skb, next_desc); |
|
377 } else { |
|
378 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n", |
|
379 "R ", i, |
|
380 (unsigned long long)le64_to_cpu(u1->a), |
|
381 (unsigned long long)le64_to_cpu(u1->b), |
|
382 (unsigned long long)le64_to_cpu(u1->c), |
|
383 (unsigned long long)le64_to_cpu(u1->d), |
|
384 (unsigned long long)buffer_info->dma, |
|
385 buffer_info->skb, next_desc); |
|
386 |
|
387 if (netif_msg_pktdata(adapter)) |
|
388 e1000e_dump_ps_pages(adapter, |
|
389 buffer_info); |
|
390 } |
|
391 } |
|
392 break; |
|
393 default: |
|
394 case 0: |
|
395 /* Extended Receive Descriptor (Read) Format |
|
396 * |
|
397 * +-----------------------------------------------------+ |
|
398 * 0 | Buffer Address [63:0] | |
|
399 * +-----------------------------------------------------+ |
|
400 * 8 | Reserved | |
|
401 * +-----------------------------------------------------+ |
|
402 */ |
|
403 pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n"); |
|
404 /* Extended Receive Descriptor (Write-Back) Format |
|
405 * |
|
406 * 63 48 47 32 31 24 23 4 3 0 |
|
407 * +------------------------------------------------------+ |
|
408 * | RSS Hash | | | | |
|
409 * 0 +-------------------+ Rsvd | Reserved | MRQ RSS | |
|
410 * | Packet | IP | | | Type | |
|
411 * | Checksum | Ident | | | | |
|
412 * +------------------------------------------------------+ |
|
413 * 8 | VLAN Tag | Length | Extended Error | Extended Status | |
|
414 * +------------------------------------------------------+ |
|
415 * 63 48 47 32 31 20 19 0 |
|
416 */ |
|
417 pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n"); |
|
418 |
|
419 for (i = 0; i < rx_ring->count; i++) { |
|
420 const char *next_desc; |
|
421 |
|
422 buffer_info = &rx_ring->buffer_info[i]; |
|
423 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
424 u1 = (struct my_u1 *)rx_desc; |
|
425 staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
|
426 |
|
427 if (i == rx_ring->next_to_use) |
|
428 next_desc = " NTU"; |
|
429 else if (i == rx_ring->next_to_clean) |
|
430 next_desc = " NTC"; |
|
431 else |
|
432 next_desc = ""; |
|
433 |
|
434 if (staterr & E1000_RXD_STAT_DD) { |
|
435 /* Descriptor Done */ |
|
436 pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n", |
|
437 "RWB", i, |
|
438 (unsigned long long)le64_to_cpu(u1->a), |
|
439 (unsigned long long)le64_to_cpu(u1->b), |
|
440 buffer_info->skb, next_desc); |
|
441 } else { |
|
442 pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n", |
|
443 "R ", i, |
|
444 (unsigned long long)le64_to_cpu(u1->a), |
|
445 (unsigned long long)le64_to_cpu(u1->b), |
|
446 (unsigned long long)buffer_info->dma, |
|
447 buffer_info->skb, next_desc); |
|
448 |
|
449 if (netif_msg_pktdata(adapter) && |
|
450 buffer_info->skb) |
|
451 print_hex_dump(KERN_INFO, "", |
|
452 DUMP_PREFIX_ADDRESS, 16, |
|
453 1, |
|
454 buffer_info->skb->data, |
|
455 adapter->rx_buffer_len, |
|
456 true); |
|
457 } |
|
458 } |
|
459 } |
|
460 } |
|
461 |
|
462 /** |
|
463 * e1000_desc_unused - calculate if we have unused descriptors |
|
464 **/ |
|
465 static int e1000_desc_unused(struct e1000_ring *ring) |
|
466 { |
|
467 if (ring->next_to_clean > ring->next_to_use) |
|
468 return ring->next_to_clean - ring->next_to_use - 1; |
|
469 |
|
470 return ring->count + ring->next_to_clean - ring->next_to_use - 1; |
|
471 } |
|
472 |
|
473 /** |
|
474 * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp |
|
475 * @adapter: board private structure |
|
476 * @hwtstamps: time stamp structure to update |
|
477 * @systim: unsigned 64bit system time value. |
|
478 * |
|
479 * Convert the system time value stored in the RX/TXSTMP registers into a |
|
480 * hwtstamp which can be used by the upper level time stamping functions. |
|
481 * |
|
482 * The 'systim_lock' spinlock is used to protect the consistency of the |
|
483 * system time value. This is needed because reading the 64 bit time |
|
484 * value involves reading two 32 bit registers. The first read latches the |
|
485 * value. |
|
486 **/ |
|
487 static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter, |
|
488 struct skb_shared_hwtstamps *hwtstamps, |
|
489 u64 systim) |
|
490 { |
|
491 u64 ns; |
|
492 unsigned long flags; |
|
493 |
|
494 spin_lock_irqsave(&adapter->systim_lock, flags); |
|
495 ns = timecounter_cyc2time(&adapter->tc, systim); |
|
496 spin_unlock_irqrestore(&adapter->systim_lock, flags); |
|
497 |
|
498 memset(hwtstamps, 0, sizeof(*hwtstamps)); |
|
499 hwtstamps->hwtstamp = ns_to_ktime(ns); |
|
500 } |
|
501 |
|
502 /** |
|
503 * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp |
|
504 * @adapter: board private structure |
|
505 * @status: descriptor extended error and status field |
|
506 * @skb: particular skb to include time stamp |
|
507 * |
|
508 * If the time stamp is valid, convert it into the timecounter ns value |
|
509 * and store that result into the shhwtstamps structure which is passed |
|
510 * up the network stack. |
|
511 **/ |
|
512 static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status, |
|
513 struct sk_buff *skb) |
|
514 { |
|
515 struct e1000_hw *hw = &adapter->hw; |
|
516 u64 rxstmp; |
|
517 |
|
518 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) || |
|
519 !(status & E1000_RXDEXT_STATERR_TST) || |
|
520 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) |
|
521 return; |
|
522 |
|
523 /* The Rx time stamp registers contain the time stamp. No other |
|
524 * received packet will be time stamped until the Rx time stamp |
|
525 * registers are read. Because only one packet can be time stamped |
|
526 * at a time, the register values must belong to this packet and |
|
527 * therefore none of the other additional attributes need to be |
|
528 * compared. |
|
529 */ |
|
530 rxstmp = (u64)er32(RXSTMPL); |
|
531 rxstmp |= (u64)er32(RXSTMPH) << 32; |
|
532 e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp); |
|
533 |
|
534 adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP; |
|
535 } |
|
536 |
|
537 /** |
|
538 * e1000_receive_skb - helper function to handle Rx indications |
|
539 * @adapter: board private structure |
|
540 * @staterr: descriptor extended error and status field as written by hardware |
|
541 * @vlan: descriptor vlan field as written by hardware (no le/be conversion) |
|
542 * @skb: pointer to sk_buff to be indicated to stack |
|
543 **/ |
|
544 static void e1000_receive_skb(struct e1000_adapter *adapter, |
|
545 struct net_device *netdev, struct sk_buff *skb, |
|
546 u32 staterr, __le16 vlan) |
|
547 { |
|
548 u16 tag = le16_to_cpu(vlan); |
|
549 |
|
550 e1000e_rx_hwtstamp(adapter, staterr, skb); |
|
551 |
|
552 skb->protocol = eth_type_trans(skb, netdev); |
|
553 |
|
554 if (staterr & E1000_RXD_STAT_VP) |
|
555 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag); |
|
556 |
|
557 napi_gro_receive(&adapter->napi, skb); |
|
558 } |
|
559 |
|
560 /** |
|
561 * e1000_rx_checksum - Receive Checksum Offload |
|
562 * @adapter: board private structure |
|
563 * @status_err: receive descriptor status and error fields |
|
564 * @csum: receive descriptor csum field |
|
565 * @sk_buff: socket buffer with received data |
|
566 **/ |
|
567 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, |
|
568 struct sk_buff *skb) |
|
569 { |
|
570 u16 status = (u16)status_err; |
|
571 u8 errors = (u8)(status_err >> 24); |
|
572 |
|
573 skb_checksum_none_assert(skb); |
|
574 |
|
575 /* Rx checksum disabled */ |
|
576 if (!(adapter->netdev->features & NETIF_F_RXCSUM)) |
|
577 return; |
|
578 |
|
579 /* Ignore Checksum bit is set */ |
|
580 if (status & E1000_RXD_STAT_IXSM) |
|
581 return; |
|
582 |
|
583 /* TCP/UDP checksum error bit or IP checksum error bit is set */ |
|
584 if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) { |
|
585 /* let the stack verify checksum errors */ |
|
586 adapter->hw_csum_err++; |
|
587 return; |
|
588 } |
|
589 |
|
590 /* TCP/UDP Checksum has not been calculated */ |
|
591 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) |
|
592 return; |
|
593 |
|
594 /* It must be a TCP or UDP packet with a valid checksum */ |
|
595 skb->ip_summed = CHECKSUM_UNNECESSARY; |
|
596 adapter->hw_csum_good++; |
|
597 } |
|
598 |
|
599 static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i) |
|
600 { |
|
601 struct e1000_adapter *adapter = rx_ring->adapter; |
|
602 struct e1000_hw *hw = &adapter->hw; |
|
603 s32 ret_val = __ew32_prepare(hw); |
|
604 |
|
605 writel(i, rx_ring->tail); |
|
606 |
|
607 if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) { |
|
608 u32 rctl = er32(RCTL); |
|
609 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
610 e_err("ME firmware caused invalid RDT - resetting\n"); |
|
611 schedule_work(&adapter->reset_task); |
|
612 } |
|
613 } |
|
614 |
|
615 static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i) |
|
616 { |
|
617 struct e1000_adapter *adapter = tx_ring->adapter; |
|
618 struct e1000_hw *hw = &adapter->hw; |
|
619 s32 ret_val = __ew32_prepare(hw); |
|
620 |
|
621 writel(i, tx_ring->tail); |
|
622 |
|
623 if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) { |
|
624 u32 tctl = er32(TCTL); |
|
625 ew32(TCTL, tctl & ~E1000_TCTL_EN); |
|
626 e_err("ME firmware caused invalid TDT - resetting\n"); |
|
627 schedule_work(&adapter->reset_task); |
|
628 } |
|
629 } |
|
630 |
|
631 /** |
|
632 * e1000_alloc_rx_buffers - Replace used receive buffers |
|
633 * @rx_ring: Rx descriptor ring |
|
634 **/ |
|
635 static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring, |
|
636 int cleaned_count, gfp_t gfp) |
|
637 { |
|
638 struct e1000_adapter *adapter = rx_ring->adapter; |
|
639 struct net_device *netdev = adapter->netdev; |
|
640 struct pci_dev *pdev = adapter->pdev; |
|
641 union e1000_rx_desc_extended *rx_desc; |
|
642 struct e1000_buffer *buffer_info; |
|
643 struct sk_buff *skb; |
|
644 unsigned int i; |
|
645 unsigned int bufsz = adapter->rx_buffer_len; |
|
646 |
|
647 i = rx_ring->next_to_use; |
|
648 buffer_info = &rx_ring->buffer_info[i]; |
|
649 |
|
650 while (cleaned_count--) { |
|
651 skb = buffer_info->skb; |
|
652 if (skb) { |
|
653 skb_trim(skb, 0); |
|
654 goto map_skb; |
|
655 } |
|
656 |
|
657 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp); |
|
658 if (!skb) { |
|
659 /* Better luck next round */ |
|
660 adapter->alloc_rx_buff_failed++; |
|
661 break; |
|
662 } |
|
663 |
|
664 buffer_info->skb = skb; |
|
665 map_skb: |
|
666 buffer_info->dma = dma_map_single(&pdev->dev, skb->data, |
|
667 adapter->rx_buffer_len, |
|
668 DMA_FROM_DEVICE); |
|
669 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { |
|
670 dev_err(&pdev->dev, "Rx DMA map failed\n"); |
|
671 adapter->rx_dma_failed++; |
|
672 break; |
|
673 } |
|
674 |
|
675 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
676 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); |
|
677 |
|
678 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { |
|
679 /* Force memory writes to complete before letting h/w |
|
680 * know there are new descriptors to fetch. (Only |
|
681 * applicable for weak-ordered memory model archs, |
|
682 * such as IA-64). |
|
683 */ |
|
684 wmb(); |
|
685 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
686 e1000e_update_rdt_wa(rx_ring, i); |
|
687 else |
|
688 writel(i, rx_ring->tail); |
|
689 } |
|
690 i++; |
|
691 if (i == rx_ring->count) |
|
692 i = 0; |
|
693 buffer_info = &rx_ring->buffer_info[i]; |
|
694 } |
|
695 |
|
696 rx_ring->next_to_use = i; |
|
697 } |
|
698 |
|
699 /** |
|
700 * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split |
|
701 * @rx_ring: Rx descriptor ring |
|
702 **/ |
|
703 static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring, |
|
704 int cleaned_count, gfp_t gfp) |
|
705 { |
|
706 struct e1000_adapter *adapter = rx_ring->adapter; |
|
707 struct net_device *netdev = adapter->netdev; |
|
708 struct pci_dev *pdev = adapter->pdev; |
|
709 union e1000_rx_desc_packet_split *rx_desc; |
|
710 struct e1000_buffer *buffer_info; |
|
711 struct e1000_ps_page *ps_page; |
|
712 struct sk_buff *skb; |
|
713 unsigned int i, j; |
|
714 |
|
715 i = rx_ring->next_to_use; |
|
716 buffer_info = &rx_ring->buffer_info[i]; |
|
717 |
|
718 while (cleaned_count--) { |
|
719 rx_desc = E1000_RX_DESC_PS(*rx_ring, i); |
|
720 |
|
721 for (j = 0; j < PS_PAGE_BUFFERS; j++) { |
|
722 ps_page = &buffer_info->ps_pages[j]; |
|
723 if (j >= adapter->rx_ps_pages) { |
|
724 /* all unused desc entries get hw null ptr */ |
|
725 rx_desc->read.buffer_addr[j + 1] = |
|
726 ~cpu_to_le64(0); |
|
727 continue; |
|
728 } |
|
729 if (!ps_page->page) { |
|
730 ps_page->page = alloc_page(gfp); |
|
731 if (!ps_page->page) { |
|
732 adapter->alloc_rx_buff_failed++; |
|
733 goto no_buffers; |
|
734 } |
|
735 ps_page->dma = dma_map_page(&pdev->dev, |
|
736 ps_page->page, |
|
737 0, PAGE_SIZE, |
|
738 DMA_FROM_DEVICE); |
|
739 if (dma_mapping_error(&pdev->dev, |
|
740 ps_page->dma)) { |
|
741 dev_err(&adapter->pdev->dev, |
|
742 "Rx DMA page map failed\n"); |
|
743 adapter->rx_dma_failed++; |
|
744 goto no_buffers; |
|
745 } |
|
746 } |
|
747 /* Refresh the desc even if buffer_addrs |
|
748 * didn't change because each write-back |
|
749 * erases this info. |
|
750 */ |
|
751 rx_desc->read.buffer_addr[j + 1] = |
|
752 cpu_to_le64(ps_page->dma); |
|
753 } |
|
754 |
|
755 skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0, |
|
756 gfp); |
|
757 |
|
758 if (!skb) { |
|
759 adapter->alloc_rx_buff_failed++; |
|
760 break; |
|
761 } |
|
762 |
|
763 buffer_info->skb = skb; |
|
764 buffer_info->dma = dma_map_single(&pdev->dev, skb->data, |
|
765 adapter->rx_ps_bsize0, |
|
766 DMA_FROM_DEVICE); |
|
767 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { |
|
768 dev_err(&pdev->dev, "Rx DMA map failed\n"); |
|
769 adapter->rx_dma_failed++; |
|
770 /* cleanup skb */ |
|
771 dev_kfree_skb_any(skb); |
|
772 buffer_info->skb = NULL; |
|
773 break; |
|
774 } |
|
775 |
|
776 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); |
|
777 |
|
778 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { |
|
779 /* Force memory writes to complete before letting h/w |
|
780 * know there are new descriptors to fetch. (Only |
|
781 * applicable for weak-ordered memory model archs, |
|
782 * such as IA-64). |
|
783 */ |
|
784 wmb(); |
|
785 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
786 e1000e_update_rdt_wa(rx_ring, i << 1); |
|
787 else |
|
788 writel(i << 1, rx_ring->tail); |
|
789 } |
|
790 |
|
791 i++; |
|
792 if (i == rx_ring->count) |
|
793 i = 0; |
|
794 buffer_info = &rx_ring->buffer_info[i]; |
|
795 } |
|
796 |
|
797 no_buffers: |
|
798 rx_ring->next_to_use = i; |
|
799 } |
|
800 |
|
801 /** |
|
802 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers |
|
803 * @rx_ring: Rx descriptor ring |
|
804 * @cleaned_count: number of buffers to allocate this pass |
|
805 **/ |
|
806 |
|
807 static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring, |
|
808 int cleaned_count, gfp_t gfp) |
|
809 { |
|
810 struct e1000_adapter *adapter = rx_ring->adapter; |
|
811 struct net_device *netdev = adapter->netdev; |
|
812 struct pci_dev *pdev = adapter->pdev; |
|
813 union e1000_rx_desc_extended *rx_desc; |
|
814 struct e1000_buffer *buffer_info; |
|
815 struct sk_buff *skb; |
|
816 unsigned int i; |
|
817 unsigned int bufsz = 256 - 16; /* for skb_reserve */ |
|
818 |
|
819 i = rx_ring->next_to_use; |
|
820 buffer_info = &rx_ring->buffer_info[i]; |
|
821 |
|
822 while (cleaned_count--) { |
|
823 skb = buffer_info->skb; |
|
824 if (skb) { |
|
825 skb_trim(skb, 0); |
|
826 goto check_page; |
|
827 } |
|
828 |
|
829 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp); |
|
830 if (unlikely(!skb)) { |
|
831 /* Better luck next round */ |
|
832 adapter->alloc_rx_buff_failed++; |
|
833 break; |
|
834 } |
|
835 |
|
836 buffer_info->skb = skb; |
|
837 check_page: |
|
838 /* allocate a new page if necessary */ |
|
839 if (!buffer_info->page) { |
|
840 buffer_info->page = alloc_page(gfp); |
|
841 if (unlikely(!buffer_info->page)) { |
|
842 adapter->alloc_rx_buff_failed++; |
|
843 break; |
|
844 } |
|
845 } |
|
846 |
|
847 if (!buffer_info->dma) { |
|
848 buffer_info->dma = dma_map_page(&pdev->dev, |
|
849 buffer_info->page, 0, |
|
850 PAGE_SIZE, |
|
851 DMA_FROM_DEVICE); |
|
852 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { |
|
853 adapter->alloc_rx_buff_failed++; |
|
854 break; |
|
855 } |
|
856 } |
|
857 |
|
858 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
859 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); |
|
860 |
|
861 if (unlikely(++i == rx_ring->count)) |
|
862 i = 0; |
|
863 buffer_info = &rx_ring->buffer_info[i]; |
|
864 } |
|
865 |
|
866 if (likely(rx_ring->next_to_use != i)) { |
|
867 rx_ring->next_to_use = i; |
|
868 if (unlikely(i-- == 0)) |
|
869 i = (rx_ring->count - 1); |
|
870 |
|
871 /* Force memory writes to complete before letting h/w |
|
872 * know there are new descriptors to fetch. (Only |
|
873 * applicable for weak-ordered memory model archs, |
|
874 * such as IA-64). |
|
875 */ |
|
876 wmb(); |
|
877 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
878 e1000e_update_rdt_wa(rx_ring, i); |
|
879 else |
|
880 writel(i, rx_ring->tail); |
|
881 } |
|
882 } |
|
883 |
|
884 static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss, |
|
885 struct sk_buff *skb) |
|
886 { |
|
887 if (netdev->features & NETIF_F_RXHASH) |
|
888 skb->rxhash = le32_to_cpu(rss); |
|
889 } |
|
890 |
|
891 /** |
|
892 * e1000_clean_rx_irq - Send received data up the network stack |
|
893 * @rx_ring: Rx descriptor ring |
|
894 * |
|
895 * the return value indicates whether actual cleaning was done, there |
|
896 * is no guarantee that everything was cleaned |
|
897 **/ |
|
898 static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, |
|
899 int work_to_do) |
|
900 { |
|
901 struct e1000_adapter *adapter = rx_ring->adapter; |
|
902 struct net_device *netdev = adapter->netdev; |
|
903 struct pci_dev *pdev = adapter->pdev; |
|
904 struct e1000_hw *hw = &adapter->hw; |
|
905 union e1000_rx_desc_extended *rx_desc, *next_rxd; |
|
906 struct e1000_buffer *buffer_info, *next_buffer; |
|
907 u32 length, staterr; |
|
908 unsigned int i; |
|
909 int cleaned_count = 0; |
|
910 bool cleaned = false; |
|
911 unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
|
912 |
|
913 i = rx_ring->next_to_clean; |
|
914 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
915 staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
|
916 buffer_info = &rx_ring->buffer_info[i]; |
|
917 |
|
918 while (staterr & E1000_RXD_STAT_DD) { |
|
919 struct sk_buff *skb; |
|
920 |
|
921 if (*work_done >= work_to_do) |
|
922 break; |
|
923 (*work_done)++; |
|
924 rmb(); /* read descriptor and rx_buffer_info after status DD */ |
|
925 |
|
926 skb = buffer_info->skb; |
|
927 buffer_info->skb = NULL; |
|
928 |
|
929 prefetch(skb->data - NET_IP_ALIGN); |
|
930 |
|
931 i++; |
|
932 if (i == rx_ring->count) |
|
933 i = 0; |
|
934 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i); |
|
935 prefetch(next_rxd); |
|
936 |
|
937 next_buffer = &rx_ring->buffer_info[i]; |
|
938 |
|
939 cleaned = true; |
|
940 cleaned_count++; |
|
941 dma_unmap_single(&pdev->dev, buffer_info->dma, |
|
942 adapter->rx_buffer_len, DMA_FROM_DEVICE); |
|
943 buffer_info->dma = 0; |
|
944 |
|
945 length = le16_to_cpu(rx_desc->wb.upper.length); |
|
946 |
|
947 /* !EOP means multiple descriptors were used to store a single |
|
948 * packet, if that's the case we need to toss it. In fact, we |
|
949 * need to toss every packet with the EOP bit clear and the |
|
950 * next frame that _does_ have the EOP bit set, as it is by |
|
951 * definition only a frame fragment |
|
952 */ |
|
953 if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) |
|
954 adapter->flags2 |= FLAG2_IS_DISCARDING; |
|
955 |
|
956 if (adapter->flags2 & FLAG2_IS_DISCARDING) { |
|
957 /* All receives must fit into a single buffer */ |
|
958 e_dbg("Receive packet consumed multiple buffers\n"); |
|
959 /* recycle */ |
|
960 buffer_info->skb = skb; |
|
961 if (staterr & E1000_RXD_STAT_EOP) |
|
962 adapter->flags2 &= ~FLAG2_IS_DISCARDING; |
|
963 goto next_desc; |
|
964 } |
|
965 |
|
966 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && |
|
967 !(netdev->features & NETIF_F_RXALL))) { |
|
968 /* recycle */ |
|
969 buffer_info->skb = skb; |
|
970 goto next_desc; |
|
971 } |
|
972 |
|
973 /* adjust length to remove Ethernet CRC */ |
|
974 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { |
|
975 /* If configured to store CRC, don't subtract FCS, |
|
976 * but keep the FCS bytes out of the total_rx_bytes |
|
977 * counter |
|
978 */ |
|
979 if (netdev->features & NETIF_F_RXFCS) |
|
980 total_rx_bytes -= 4; |
|
981 else |
|
982 length -= 4; |
|
983 } |
|
984 |
|
985 total_rx_bytes += length; |
|
986 total_rx_packets++; |
|
987 |
|
988 /* code added for copybreak, this should improve |
|
989 * performance for small packets with large amounts |
|
990 * of reassembly being done in the stack |
|
991 */ |
|
992 if (length < copybreak) { |
|
993 struct sk_buff *new_skb = |
|
994 netdev_alloc_skb_ip_align(netdev, length); |
|
995 if (new_skb) { |
|
996 skb_copy_to_linear_data_offset(new_skb, |
|
997 -NET_IP_ALIGN, |
|
998 (skb->data - |
|
999 NET_IP_ALIGN), |
|
1000 (length + |
|
1001 NET_IP_ALIGN)); |
|
1002 /* save the skb in buffer_info as good */ |
|
1003 buffer_info->skb = skb; |
|
1004 skb = new_skb; |
|
1005 } |
|
1006 /* else just continue with the old one */ |
|
1007 } |
|
1008 /* end copybreak code */ |
|
1009 skb_put(skb, length); |
|
1010 |
|
1011 /* Receive Checksum Offload */ |
|
1012 e1000_rx_checksum(adapter, staterr, skb); |
|
1013 |
|
1014 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); |
|
1015 |
|
1016 e1000_receive_skb(adapter, netdev, skb, staterr, |
|
1017 rx_desc->wb.upper.vlan); |
|
1018 |
|
1019 next_desc: |
|
1020 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF); |
|
1021 |
|
1022 /* return some buffers to hardware, one at a time is too slow */ |
|
1023 if (cleaned_count >= E1000_RX_BUFFER_WRITE) { |
|
1024 adapter->alloc_rx_buf(rx_ring, cleaned_count, |
|
1025 GFP_ATOMIC); |
|
1026 cleaned_count = 0; |
|
1027 } |
|
1028 |
|
1029 /* use prefetched values */ |
|
1030 rx_desc = next_rxd; |
|
1031 buffer_info = next_buffer; |
|
1032 |
|
1033 staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
|
1034 } |
|
1035 rx_ring->next_to_clean = i; |
|
1036 |
|
1037 cleaned_count = e1000_desc_unused(rx_ring); |
|
1038 if (cleaned_count) |
|
1039 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); |
|
1040 |
|
1041 adapter->total_rx_bytes += total_rx_bytes; |
|
1042 adapter->total_rx_packets += total_rx_packets; |
|
1043 return cleaned; |
|
1044 } |
|
1045 |
|
1046 static void e1000_put_txbuf(struct e1000_ring *tx_ring, |
|
1047 struct e1000_buffer *buffer_info) |
|
1048 { |
|
1049 struct e1000_adapter *adapter = tx_ring->adapter; |
|
1050 |
|
1051 if (buffer_info->dma) { |
|
1052 if (buffer_info->mapped_as_page) |
|
1053 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma, |
|
1054 buffer_info->length, DMA_TO_DEVICE); |
|
1055 else |
|
1056 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma, |
|
1057 buffer_info->length, DMA_TO_DEVICE); |
|
1058 buffer_info->dma = 0; |
|
1059 } |
|
1060 if (buffer_info->skb) { |
|
1061 dev_kfree_skb_any(buffer_info->skb); |
|
1062 buffer_info->skb = NULL; |
|
1063 } |
|
1064 buffer_info->time_stamp = 0; |
|
1065 } |
|
1066 |
|
1067 static void e1000_print_hw_hang(struct work_struct *work) |
|
1068 { |
|
1069 struct e1000_adapter *adapter = container_of(work, |
|
1070 struct e1000_adapter, |
|
1071 print_hang_task); |
|
1072 struct net_device *netdev = adapter->netdev; |
|
1073 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
1074 unsigned int i = tx_ring->next_to_clean; |
|
1075 unsigned int eop = tx_ring->buffer_info[i].next_to_watch; |
|
1076 struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); |
|
1077 struct e1000_hw *hw = &adapter->hw; |
|
1078 u16 phy_status, phy_1000t_status, phy_ext_status; |
|
1079 u16 pci_status; |
|
1080 |
|
1081 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
1082 return; |
|
1083 |
|
1084 if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) { |
|
1085 /* May be block on write-back, flush and detect again |
|
1086 * flush pending descriptor writebacks to memory |
|
1087 */ |
|
1088 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); |
|
1089 /* execute the writes immediately */ |
|
1090 e1e_flush(); |
|
1091 /* Due to rare timing issues, write to TIDV again to ensure |
|
1092 * the write is successful |
|
1093 */ |
|
1094 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); |
|
1095 /* execute the writes immediately */ |
|
1096 e1e_flush(); |
|
1097 adapter->tx_hang_recheck = true; |
|
1098 return; |
|
1099 } |
|
1100 /* Real hang detected */ |
|
1101 adapter->tx_hang_recheck = false; |
|
1102 netif_stop_queue(netdev); |
|
1103 |
|
1104 e1e_rphy(hw, MII_BMSR, &phy_status); |
|
1105 e1e_rphy(hw, MII_STAT1000, &phy_1000t_status); |
|
1106 e1e_rphy(hw, MII_ESTATUS, &phy_ext_status); |
|
1107 |
|
1108 pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); |
|
1109 |
|
1110 /* detected Hardware unit hang */ |
|
1111 e_err("Detected Hardware Unit Hang:\n" |
|
1112 " TDH <%x>\n" |
|
1113 " TDT <%x>\n" |
|
1114 " next_to_use <%x>\n" |
|
1115 " next_to_clean <%x>\n" |
|
1116 "buffer_info[next_to_clean]:\n" |
|
1117 " time_stamp <%lx>\n" |
|
1118 " next_to_watch <%x>\n" |
|
1119 " jiffies <%lx>\n" |
|
1120 " next_to_watch.status <%x>\n" |
|
1121 "MAC Status <%x>\n" |
|
1122 "PHY Status <%x>\n" |
|
1123 "PHY 1000BASE-T Status <%x>\n" |
|
1124 "PHY Extended Status <%x>\n" |
|
1125 "PCI Status <%x>\n", |
|
1126 readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use, |
|
1127 tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp, |
|
1128 eop, jiffies, eop_desc->upper.fields.status, er32(STATUS), |
|
1129 phy_status, phy_1000t_status, phy_ext_status, pci_status); |
|
1130 |
|
1131 /* Suggest workaround for known h/w issue */ |
|
1132 if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) |
|
1133 e_err("Try turning off Tx pause (flow control) via ethtool\n"); |
|
1134 } |
|
1135 |
|
1136 /** |
|
1137 * e1000e_tx_hwtstamp_work - check for Tx time stamp |
|
1138 * @work: pointer to work struct |
|
1139 * |
|
1140 * This work function polls the TSYNCTXCTL valid bit to determine when a |
|
1141 * timestamp has been taken for the current stored skb. The timestamp must |
|
1142 * be for this skb because only one such packet is allowed in the queue. |
|
1143 */ |
|
1144 static void e1000e_tx_hwtstamp_work(struct work_struct *work) |
|
1145 { |
|
1146 struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, |
|
1147 tx_hwtstamp_work); |
|
1148 struct e1000_hw *hw = &adapter->hw; |
|
1149 |
|
1150 if (!adapter->tx_hwtstamp_skb) |
|
1151 return; |
|
1152 |
|
1153 if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { |
|
1154 struct skb_shared_hwtstamps shhwtstamps; |
|
1155 u64 txstmp; |
|
1156 |
|
1157 txstmp = er32(TXSTMPL); |
|
1158 txstmp |= (u64)er32(TXSTMPH) << 32; |
|
1159 |
|
1160 e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); |
|
1161 |
|
1162 skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); |
|
1163 dev_kfree_skb_any(adapter->tx_hwtstamp_skb); |
|
1164 adapter->tx_hwtstamp_skb = NULL; |
|
1165 } else { |
|
1166 /* reschedule to check later */ |
|
1167 schedule_work(&adapter->tx_hwtstamp_work); |
|
1168 } |
|
1169 } |
|
1170 |
|
1171 /** |
|
1172 * e1000_clean_tx_irq - Reclaim resources after transmit completes |
|
1173 * @tx_ring: Tx descriptor ring |
|
1174 * |
|
1175 * the return value indicates whether actual cleaning was done, there |
|
1176 * is no guarantee that everything was cleaned |
|
1177 **/ |
|
1178 static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) |
|
1179 { |
|
1180 struct e1000_adapter *adapter = tx_ring->adapter; |
|
1181 struct net_device *netdev = adapter->netdev; |
|
1182 struct e1000_hw *hw = &adapter->hw; |
|
1183 struct e1000_tx_desc *tx_desc, *eop_desc; |
|
1184 struct e1000_buffer *buffer_info; |
|
1185 unsigned int i, eop; |
|
1186 unsigned int count = 0; |
|
1187 unsigned int total_tx_bytes = 0, total_tx_packets = 0; |
|
1188 unsigned int bytes_compl = 0, pkts_compl = 0; |
|
1189 |
|
1190 i = tx_ring->next_to_clean; |
|
1191 eop = tx_ring->buffer_info[i].next_to_watch; |
|
1192 eop_desc = E1000_TX_DESC(*tx_ring, eop); |
|
1193 |
|
1194 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && |
|
1195 (count < tx_ring->count)) { |
|
1196 bool cleaned = false; |
|
1197 rmb(); /* read buffer_info after eop_desc */ |
|
1198 for (; !cleaned; count++) { |
|
1199 tx_desc = E1000_TX_DESC(*tx_ring, i); |
|
1200 buffer_info = &tx_ring->buffer_info[i]; |
|
1201 cleaned = (i == eop); |
|
1202 |
|
1203 if (cleaned) { |
|
1204 total_tx_packets += buffer_info->segs; |
|
1205 total_tx_bytes += buffer_info->bytecount; |
|
1206 if (buffer_info->skb) { |
|
1207 bytes_compl += buffer_info->skb->len; |
|
1208 pkts_compl++; |
|
1209 } |
|
1210 } |
|
1211 |
|
1212 e1000_put_txbuf(tx_ring, buffer_info); |
|
1213 tx_desc->upper.data = 0; |
|
1214 |
|
1215 i++; |
|
1216 if (i == tx_ring->count) |
|
1217 i = 0; |
|
1218 } |
|
1219 |
|
1220 if (i == tx_ring->next_to_use) |
|
1221 break; |
|
1222 eop = tx_ring->buffer_info[i].next_to_watch; |
|
1223 eop_desc = E1000_TX_DESC(*tx_ring, eop); |
|
1224 } |
|
1225 |
|
1226 tx_ring->next_to_clean = i; |
|
1227 |
|
1228 netdev_completed_queue(netdev, pkts_compl, bytes_compl); |
|
1229 |
|
1230 #define TX_WAKE_THRESHOLD 32 |
|
1231 if (count && netif_carrier_ok(netdev) && |
|
1232 e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { |
|
1233 /* Make sure that anybody stopping the queue after this |
|
1234 * sees the new next_to_clean. |
|
1235 */ |
|
1236 smp_mb(); |
|
1237 |
|
1238 if (netif_queue_stopped(netdev) && |
|
1239 !(test_bit(__E1000_DOWN, &adapter->state))) { |
|
1240 netif_wake_queue(netdev); |
|
1241 ++adapter->restart_queue; |
|
1242 } |
|
1243 } |
|
1244 |
|
1245 if (adapter->detect_tx_hung) { |
|
1246 /* Detect a transmit hang in hardware, this serializes the |
|
1247 * check with the clearing of time_stamp and movement of i |
|
1248 */ |
|
1249 adapter->detect_tx_hung = false; |
|
1250 if (tx_ring->buffer_info[i].time_stamp && |
|
1251 time_after(jiffies, tx_ring->buffer_info[i].time_stamp |
|
1252 + (adapter->tx_timeout_factor * HZ)) && |
|
1253 !(er32(STATUS) & E1000_STATUS_TXOFF)) |
|
1254 schedule_work(&adapter->print_hang_task); |
|
1255 else |
|
1256 adapter->tx_hang_recheck = false; |
|
1257 } |
|
1258 adapter->total_tx_bytes += total_tx_bytes; |
|
1259 adapter->total_tx_packets += total_tx_packets; |
|
1260 return count < tx_ring->count; |
|
1261 } |
|
1262 |
|
1263 /** |
|
1264 * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split |
|
1265 * @rx_ring: Rx descriptor ring |
|
1266 * |
|
1267 * the return value indicates whether actual cleaning was done, there |
|
1268 * is no guarantee that everything was cleaned |
|
1269 **/ |
|
1270 static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, |
|
1271 int work_to_do) |
|
1272 { |
|
1273 struct e1000_adapter *adapter = rx_ring->adapter; |
|
1274 struct e1000_hw *hw = &adapter->hw; |
|
1275 union e1000_rx_desc_packet_split *rx_desc, *next_rxd; |
|
1276 struct net_device *netdev = adapter->netdev; |
|
1277 struct pci_dev *pdev = adapter->pdev; |
|
1278 struct e1000_buffer *buffer_info, *next_buffer; |
|
1279 struct e1000_ps_page *ps_page; |
|
1280 struct sk_buff *skb; |
|
1281 unsigned int i, j; |
|
1282 u32 length, staterr; |
|
1283 int cleaned_count = 0; |
|
1284 bool cleaned = false; |
|
1285 unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
|
1286 |
|
1287 i = rx_ring->next_to_clean; |
|
1288 rx_desc = E1000_RX_DESC_PS(*rx_ring, i); |
|
1289 staterr = le32_to_cpu(rx_desc->wb.middle.status_error); |
|
1290 buffer_info = &rx_ring->buffer_info[i]; |
|
1291 |
|
1292 while (staterr & E1000_RXD_STAT_DD) { |
|
1293 if (*work_done >= work_to_do) |
|
1294 break; |
|
1295 (*work_done)++; |
|
1296 skb = buffer_info->skb; |
|
1297 rmb(); /* read descriptor and rx_buffer_info after status DD */ |
|
1298 |
|
1299 /* in the packet split case this is header only */ |
|
1300 prefetch(skb->data - NET_IP_ALIGN); |
|
1301 |
|
1302 i++; |
|
1303 if (i == rx_ring->count) |
|
1304 i = 0; |
|
1305 next_rxd = E1000_RX_DESC_PS(*rx_ring, i); |
|
1306 prefetch(next_rxd); |
|
1307 |
|
1308 next_buffer = &rx_ring->buffer_info[i]; |
|
1309 |
|
1310 cleaned = true; |
|
1311 cleaned_count++; |
|
1312 dma_unmap_single(&pdev->dev, buffer_info->dma, |
|
1313 adapter->rx_ps_bsize0, DMA_FROM_DEVICE); |
|
1314 buffer_info->dma = 0; |
|
1315 |
|
1316 /* see !EOP comment in other Rx routine */ |
|
1317 if (!(staterr & E1000_RXD_STAT_EOP)) |
|
1318 adapter->flags2 |= FLAG2_IS_DISCARDING; |
|
1319 |
|
1320 if (adapter->flags2 & FLAG2_IS_DISCARDING) { |
|
1321 e_dbg("Packet Split buffers didn't pick up the full packet\n"); |
|
1322 dev_kfree_skb_irq(skb); |
|
1323 if (staterr & E1000_RXD_STAT_EOP) |
|
1324 adapter->flags2 &= ~FLAG2_IS_DISCARDING; |
|
1325 goto next_desc; |
|
1326 } |
|
1327 |
|
1328 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && |
|
1329 !(netdev->features & NETIF_F_RXALL))) { |
|
1330 dev_kfree_skb_irq(skb); |
|
1331 goto next_desc; |
|
1332 } |
|
1333 |
|
1334 length = le16_to_cpu(rx_desc->wb.middle.length0); |
|
1335 |
|
1336 if (!length) { |
|
1337 e_dbg("Last part of the packet spanning multiple descriptors\n"); |
|
1338 dev_kfree_skb_irq(skb); |
|
1339 goto next_desc; |
|
1340 } |
|
1341 |
|
1342 /* Good Receive */ |
|
1343 skb_put(skb, length); |
|
1344 |
|
1345 { |
|
1346 /* this looks ugly, but it seems compiler issues make |
|
1347 * it more efficient than reusing j |
|
1348 */ |
|
1349 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); |
|
1350 |
|
1351 /* page alloc/put takes too long and effects small |
|
1352 * packet throughput, so unsplit small packets and |
|
1353 * save the alloc/put only valid in softirq (napi) |
|
1354 * context to call kmap_* |
|
1355 */ |
|
1356 if (l1 && (l1 <= copybreak) && |
|
1357 ((length + l1) <= adapter->rx_ps_bsize0)) { |
|
1358 u8 *vaddr; |
|
1359 |
|
1360 ps_page = &buffer_info->ps_pages[0]; |
|
1361 |
|
1362 /* there is no documentation about how to call |
|
1363 * kmap_atomic, so we can't hold the mapping |
|
1364 * very long |
|
1365 */ |
|
1366 dma_sync_single_for_cpu(&pdev->dev, |
|
1367 ps_page->dma, |
|
1368 PAGE_SIZE, |
|
1369 DMA_FROM_DEVICE); |
|
1370 vaddr = kmap_atomic(ps_page->page); |
|
1371 memcpy(skb_tail_pointer(skb), vaddr, l1); |
|
1372 kunmap_atomic(vaddr); |
|
1373 dma_sync_single_for_device(&pdev->dev, |
|
1374 ps_page->dma, |
|
1375 PAGE_SIZE, |
|
1376 DMA_FROM_DEVICE); |
|
1377 |
|
1378 /* remove the CRC */ |
|
1379 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { |
|
1380 if (!(netdev->features & NETIF_F_RXFCS)) |
|
1381 l1 -= 4; |
|
1382 } |
|
1383 |
|
1384 skb_put(skb, l1); |
|
1385 goto copydone; |
|
1386 } /* if */ |
|
1387 } |
|
1388 |
|
1389 for (j = 0; j < PS_PAGE_BUFFERS; j++) { |
|
1390 length = le16_to_cpu(rx_desc->wb.upper.length[j]); |
|
1391 if (!length) |
|
1392 break; |
|
1393 |
|
1394 ps_page = &buffer_info->ps_pages[j]; |
|
1395 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, |
|
1396 DMA_FROM_DEVICE); |
|
1397 ps_page->dma = 0; |
|
1398 skb_fill_page_desc(skb, j, ps_page->page, 0, length); |
|
1399 ps_page->page = NULL; |
|
1400 skb->len += length; |
|
1401 skb->data_len += length; |
|
1402 skb->truesize += PAGE_SIZE; |
|
1403 } |
|
1404 |
|
1405 /* strip the ethernet crc, problem is we're using pages now so |
|
1406 * this whole operation can get a little cpu intensive |
|
1407 */ |
|
1408 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) { |
|
1409 if (!(netdev->features & NETIF_F_RXFCS)) |
|
1410 pskb_trim(skb, skb->len - 4); |
|
1411 } |
|
1412 |
|
1413 copydone: |
|
1414 total_rx_bytes += skb->len; |
|
1415 total_rx_packets++; |
|
1416 |
|
1417 e1000_rx_checksum(adapter, staterr, skb); |
|
1418 |
|
1419 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); |
|
1420 |
|
1421 if (rx_desc->wb.upper.header_status & |
|
1422 cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)) |
|
1423 adapter->rx_hdr_split++; |
|
1424 |
|
1425 e1000_receive_skb(adapter, netdev, skb, staterr, |
|
1426 rx_desc->wb.middle.vlan); |
|
1427 |
|
1428 next_desc: |
|
1429 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF); |
|
1430 buffer_info->skb = NULL; |
|
1431 |
|
1432 /* return some buffers to hardware, one at a time is too slow */ |
|
1433 if (cleaned_count >= E1000_RX_BUFFER_WRITE) { |
|
1434 adapter->alloc_rx_buf(rx_ring, cleaned_count, |
|
1435 GFP_ATOMIC); |
|
1436 cleaned_count = 0; |
|
1437 } |
|
1438 |
|
1439 /* use prefetched values */ |
|
1440 rx_desc = next_rxd; |
|
1441 buffer_info = next_buffer; |
|
1442 |
|
1443 staterr = le32_to_cpu(rx_desc->wb.middle.status_error); |
|
1444 } |
|
1445 rx_ring->next_to_clean = i; |
|
1446 |
|
1447 cleaned_count = e1000_desc_unused(rx_ring); |
|
1448 if (cleaned_count) |
|
1449 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); |
|
1450 |
|
1451 adapter->total_rx_bytes += total_rx_bytes; |
|
1452 adapter->total_rx_packets += total_rx_packets; |
|
1453 return cleaned; |
|
1454 } |
|
1455 |
|
1456 /** |
|
1457 * e1000_consume_page - helper function |
|
1458 **/ |
|
1459 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb, |
|
1460 u16 length) |
|
1461 { |
|
1462 bi->page = NULL; |
|
1463 skb->len += length; |
|
1464 skb->data_len += length; |
|
1465 skb->truesize += PAGE_SIZE; |
|
1466 } |
|
1467 |
|
1468 /** |
|
1469 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy |
|
1470 * @adapter: board private structure |
|
1471 * |
|
1472 * the return value indicates whether actual cleaning was done, there |
|
1473 * is no guarantee that everything was cleaned |
|
1474 **/ |
|
1475 static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, |
|
1476 int work_to_do) |
|
1477 { |
|
1478 struct e1000_adapter *adapter = rx_ring->adapter; |
|
1479 struct net_device *netdev = adapter->netdev; |
|
1480 struct pci_dev *pdev = adapter->pdev; |
|
1481 union e1000_rx_desc_extended *rx_desc, *next_rxd; |
|
1482 struct e1000_buffer *buffer_info, *next_buffer; |
|
1483 u32 length, staterr; |
|
1484 unsigned int i; |
|
1485 int cleaned_count = 0; |
|
1486 bool cleaned = false; |
|
1487 unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
|
1488 struct skb_shared_info *shinfo; |
|
1489 |
|
1490 i = rx_ring->next_to_clean; |
|
1491 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
1492 staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
|
1493 buffer_info = &rx_ring->buffer_info[i]; |
|
1494 |
|
1495 while (staterr & E1000_RXD_STAT_DD) { |
|
1496 struct sk_buff *skb; |
|
1497 |
|
1498 if (*work_done >= work_to_do) |
|
1499 break; |
|
1500 (*work_done)++; |
|
1501 rmb(); /* read descriptor and rx_buffer_info after status DD */ |
|
1502 |
|
1503 skb = buffer_info->skb; |
|
1504 buffer_info->skb = NULL; |
|
1505 |
|
1506 ++i; |
|
1507 if (i == rx_ring->count) |
|
1508 i = 0; |
|
1509 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i); |
|
1510 prefetch(next_rxd); |
|
1511 |
|
1512 next_buffer = &rx_ring->buffer_info[i]; |
|
1513 |
|
1514 cleaned = true; |
|
1515 cleaned_count++; |
|
1516 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE, |
|
1517 DMA_FROM_DEVICE); |
|
1518 buffer_info->dma = 0; |
|
1519 |
|
1520 length = le16_to_cpu(rx_desc->wb.upper.length); |
|
1521 |
|
1522 /* errors is only valid for DD + EOP descriptors */ |
|
1523 if (unlikely((staterr & E1000_RXD_STAT_EOP) && |
|
1524 ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) && |
|
1525 !(netdev->features & NETIF_F_RXALL)))) { |
|
1526 /* recycle both page and skb */ |
|
1527 buffer_info->skb = skb; |
|
1528 /* an error means any chain goes out the window too */ |
|
1529 if (rx_ring->rx_skb_top) |
|
1530 dev_kfree_skb_irq(rx_ring->rx_skb_top); |
|
1531 rx_ring->rx_skb_top = NULL; |
|
1532 goto next_desc; |
|
1533 } |
|
1534 #define rxtop (rx_ring->rx_skb_top) |
|
1535 if (!(staterr & E1000_RXD_STAT_EOP)) { |
|
1536 /* this descriptor is only the beginning (or middle) */ |
|
1537 if (!rxtop) { |
|
1538 /* this is the beginning of a chain */ |
|
1539 rxtop = skb; |
|
1540 skb_fill_page_desc(rxtop, 0, buffer_info->page, |
|
1541 0, length); |
|
1542 } else { |
|
1543 /* this is the middle of a chain */ |
|
1544 shinfo = skb_shinfo(rxtop); |
|
1545 skb_fill_page_desc(rxtop, shinfo->nr_frags, |
|
1546 buffer_info->page, 0, |
|
1547 length); |
|
1548 /* re-use the skb, only consumed the page */ |
|
1549 buffer_info->skb = skb; |
|
1550 } |
|
1551 e1000_consume_page(buffer_info, rxtop, length); |
|
1552 goto next_desc; |
|
1553 } else { |
|
1554 if (rxtop) { |
|
1555 /* end of the chain */ |
|
1556 shinfo = skb_shinfo(rxtop); |
|
1557 skb_fill_page_desc(rxtop, shinfo->nr_frags, |
|
1558 buffer_info->page, 0, |
|
1559 length); |
|
1560 /* re-use the current skb, we only consumed the |
|
1561 * page |
|
1562 */ |
|
1563 buffer_info->skb = skb; |
|
1564 skb = rxtop; |
|
1565 rxtop = NULL; |
|
1566 e1000_consume_page(buffer_info, skb, length); |
|
1567 } else { |
|
1568 /* no chain, got EOP, this buf is the packet |
|
1569 * copybreak to save the put_page/alloc_page |
|
1570 */ |
|
1571 if (length <= copybreak && |
|
1572 skb_tailroom(skb) >= length) { |
|
1573 u8 *vaddr; |
|
1574 vaddr = kmap_atomic(buffer_info->page); |
|
1575 memcpy(skb_tail_pointer(skb), vaddr, |
|
1576 length); |
|
1577 kunmap_atomic(vaddr); |
|
1578 /* re-use the page, so don't erase |
|
1579 * buffer_info->page |
|
1580 */ |
|
1581 skb_put(skb, length); |
|
1582 } else { |
|
1583 skb_fill_page_desc(skb, 0, |
|
1584 buffer_info->page, 0, |
|
1585 length); |
|
1586 e1000_consume_page(buffer_info, skb, |
|
1587 length); |
|
1588 } |
|
1589 } |
|
1590 } |
|
1591 |
|
1592 /* Receive Checksum Offload */ |
|
1593 e1000_rx_checksum(adapter, staterr, skb); |
|
1594 |
|
1595 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb); |
|
1596 |
|
1597 /* probably a little skewed due to removing CRC */ |
|
1598 total_rx_bytes += skb->len; |
|
1599 total_rx_packets++; |
|
1600 |
|
1601 /* eth type trans needs skb->data to point to something */ |
|
1602 if (!pskb_may_pull(skb, ETH_HLEN)) { |
|
1603 e_err("pskb_may_pull failed.\n"); |
|
1604 dev_kfree_skb_irq(skb); |
|
1605 goto next_desc; |
|
1606 } |
|
1607 |
|
1608 e1000_receive_skb(adapter, netdev, skb, staterr, |
|
1609 rx_desc->wb.upper.vlan); |
|
1610 |
|
1611 next_desc: |
|
1612 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF); |
|
1613 |
|
1614 /* return some buffers to hardware, one at a time is too slow */ |
|
1615 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) { |
|
1616 adapter->alloc_rx_buf(rx_ring, cleaned_count, |
|
1617 GFP_ATOMIC); |
|
1618 cleaned_count = 0; |
|
1619 } |
|
1620 |
|
1621 /* use prefetched values */ |
|
1622 rx_desc = next_rxd; |
|
1623 buffer_info = next_buffer; |
|
1624 |
|
1625 staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
|
1626 } |
|
1627 rx_ring->next_to_clean = i; |
|
1628 |
|
1629 cleaned_count = e1000_desc_unused(rx_ring); |
|
1630 if (cleaned_count) |
|
1631 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC); |
|
1632 |
|
1633 adapter->total_rx_bytes += total_rx_bytes; |
|
1634 adapter->total_rx_packets += total_rx_packets; |
|
1635 return cleaned; |
|
1636 } |
|
1637 |
|
1638 /** |
|
1639 * e1000_clean_rx_ring - Free Rx Buffers per Queue |
|
1640 * @rx_ring: Rx descriptor ring |
|
1641 **/ |
|
1642 static void e1000_clean_rx_ring(struct e1000_ring *rx_ring) |
|
1643 { |
|
1644 struct e1000_adapter *adapter = rx_ring->adapter; |
|
1645 struct e1000_buffer *buffer_info; |
|
1646 struct e1000_ps_page *ps_page; |
|
1647 struct pci_dev *pdev = adapter->pdev; |
|
1648 unsigned int i, j; |
|
1649 |
|
1650 /* Free all the Rx ring sk_buffs */ |
|
1651 for (i = 0; i < rx_ring->count; i++) { |
|
1652 buffer_info = &rx_ring->buffer_info[i]; |
|
1653 if (buffer_info->dma) { |
|
1654 if (adapter->clean_rx == e1000_clean_rx_irq) |
|
1655 dma_unmap_single(&pdev->dev, buffer_info->dma, |
|
1656 adapter->rx_buffer_len, |
|
1657 DMA_FROM_DEVICE); |
|
1658 else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq) |
|
1659 dma_unmap_page(&pdev->dev, buffer_info->dma, |
|
1660 PAGE_SIZE, DMA_FROM_DEVICE); |
|
1661 else if (adapter->clean_rx == e1000_clean_rx_irq_ps) |
|
1662 dma_unmap_single(&pdev->dev, buffer_info->dma, |
|
1663 adapter->rx_ps_bsize0, |
|
1664 DMA_FROM_DEVICE); |
|
1665 buffer_info->dma = 0; |
|
1666 } |
|
1667 |
|
1668 if (buffer_info->page) { |
|
1669 put_page(buffer_info->page); |
|
1670 buffer_info->page = NULL; |
|
1671 } |
|
1672 |
|
1673 if (buffer_info->skb) { |
|
1674 dev_kfree_skb(buffer_info->skb); |
|
1675 buffer_info->skb = NULL; |
|
1676 } |
|
1677 |
|
1678 for (j = 0; j < PS_PAGE_BUFFERS; j++) { |
|
1679 ps_page = &buffer_info->ps_pages[j]; |
|
1680 if (!ps_page->page) |
|
1681 break; |
|
1682 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE, |
|
1683 DMA_FROM_DEVICE); |
|
1684 ps_page->dma = 0; |
|
1685 put_page(ps_page->page); |
|
1686 ps_page->page = NULL; |
|
1687 } |
|
1688 } |
|
1689 |
|
1690 /* there also may be some cached data from a chained receive */ |
|
1691 if (rx_ring->rx_skb_top) { |
|
1692 dev_kfree_skb(rx_ring->rx_skb_top); |
|
1693 rx_ring->rx_skb_top = NULL; |
|
1694 } |
|
1695 |
|
1696 /* Zero out the descriptor ring */ |
|
1697 memset(rx_ring->desc, 0, rx_ring->size); |
|
1698 |
|
1699 rx_ring->next_to_clean = 0; |
|
1700 rx_ring->next_to_use = 0; |
|
1701 adapter->flags2 &= ~FLAG2_IS_DISCARDING; |
|
1702 |
|
1703 writel(0, rx_ring->head); |
|
1704 if (rx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
1705 e1000e_update_rdt_wa(rx_ring, 0); |
|
1706 else |
|
1707 writel(0, rx_ring->tail); |
|
1708 } |
|
1709 |
|
1710 static void e1000e_downshift_workaround(struct work_struct *work) |
|
1711 { |
|
1712 struct e1000_adapter *adapter = container_of(work, |
|
1713 struct e1000_adapter, |
|
1714 downshift_task); |
|
1715 |
|
1716 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
1717 return; |
|
1718 |
|
1719 e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); |
|
1720 } |
|
1721 |
|
1722 /** |
|
1723 * e1000_intr_msi - Interrupt Handler |
|
1724 * @irq: interrupt number |
|
1725 * @data: pointer to a network interface device structure |
|
1726 **/ |
|
1727 static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) |
|
1728 { |
|
1729 struct net_device *netdev = data; |
|
1730 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1731 struct e1000_hw *hw = &adapter->hw; |
|
1732 u32 icr = er32(ICR); |
|
1733 |
|
1734 /* read ICR disables interrupts using IAM */ |
|
1735 if (icr & E1000_ICR_LSC) { |
|
1736 hw->mac.get_link_status = true; |
|
1737 /* ICH8 workaround-- Call gig speed drop workaround on cable |
|
1738 * disconnect (LSC) before accessing any PHY registers |
|
1739 */ |
|
1740 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && |
|
1741 (!(er32(STATUS) & E1000_STATUS_LU))) |
|
1742 schedule_work(&adapter->downshift_task); |
|
1743 |
|
1744 /* 80003ES2LAN workaround-- For packet buffer work-around on |
|
1745 * link down event; disable receives here in the ISR and reset |
|
1746 * adapter in watchdog |
|
1747 */ |
|
1748 if (netif_carrier_ok(netdev) && |
|
1749 adapter->flags & FLAG_RX_NEEDS_RESTART) { |
|
1750 /* disable receives */ |
|
1751 u32 rctl = er32(RCTL); |
|
1752 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
1753 adapter->flags |= FLAG_RESTART_NOW; |
|
1754 } |
|
1755 /* guard against interrupt when we're going down */ |
|
1756 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
1757 mod_timer(&adapter->watchdog_timer, jiffies + 1); |
|
1758 } |
|
1759 |
|
1760 /* Reset on uncorrectable ECC error */ |
|
1761 if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { |
|
1762 u32 pbeccsts = er32(PBECCSTS); |
|
1763 |
|
1764 adapter->corr_errors += |
|
1765 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; |
|
1766 adapter->uncorr_errors += |
|
1767 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> |
|
1768 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; |
|
1769 |
|
1770 /* Do the reset outside of interrupt context */ |
|
1771 schedule_work(&adapter->reset_task); |
|
1772 |
|
1773 /* return immediately since reset is imminent */ |
|
1774 return IRQ_HANDLED; |
|
1775 } |
|
1776 |
|
1777 if (napi_schedule_prep(&adapter->napi)) { |
|
1778 adapter->total_tx_bytes = 0; |
|
1779 adapter->total_tx_packets = 0; |
|
1780 adapter->total_rx_bytes = 0; |
|
1781 adapter->total_rx_packets = 0; |
|
1782 __napi_schedule(&adapter->napi); |
|
1783 } |
|
1784 |
|
1785 return IRQ_HANDLED; |
|
1786 } |
|
1787 |
|
1788 /** |
|
1789 * e1000_intr - Interrupt Handler |
|
1790 * @irq: interrupt number |
|
1791 * @data: pointer to a network interface device structure |
|
1792 **/ |
|
1793 static irqreturn_t e1000_intr(int __always_unused irq, void *data) |
|
1794 { |
|
1795 struct net_device *netdev = data; |
|
1796 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1797 struct e1000_hw *hw = &adapter->hw; |
|
1798 u32 rctl, icr = er32(ICR); |
|
1799 |
|
1800 if (!icr || test_bit(__E1000_DOWN, &adapter->state)) |
|
1801 return IRQ_NONE; /* Not our interrupt */ |
|
1802 |
|
1803 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is |
|
1804 * not set, then the adapter didn't send an interrupt |
|
1805 */ |
|
1806 if (!(icr & E1000_ICR_INT_ASSERTED)) |
|
1807 return IRQ_NONE; |
|
1808 |
|
1809 /* Interrupt Auto-Mask...upon reading ICR, |
|
1810 * interrupts are masked. No need for the |
|
1811 * IMC write |
|
1812 */ |
|
1813 |
|
1814 if (icr & E1000_ICR_LSC) { |
|
1815 hw->mac.get_link_status = true; |
|
1816 /* ICH8 workaround-- Call gig speed drop workaround on cable |
|
1817 * disconnect (LSC) before accessing any PHY registers |
|
1818 */ |
|
1819 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && |
|
1820 (!(er32(STATUS) & E1000_STATUS_LU))) |
|
1821 schedule_work(&adapter->downshift_task); |
|
1822 |
|
1823 /* 80003ES2LAN workaround-- |
|
1824 * For packet buffer work-around on link down event; |
|
1825 * disable receives here in the ISR and |
|
1826 * reset adapter in watchdog |
|
1827 */ |
|
1828 if (netif_carrier_ok(netdev) && |
|
1829 (adapter->flags & FLAG_RX_NEEDS_RESTART)) { |
|
1830 /* disable receives */ |
|
1831 rctl = er32(RCTL); |
|
1832 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
1833 adapter->flags |= FLAG_RESTART_NOW; |
|
1834 } |
|
1835 /* guard against interrupt when we're going down */ |
|
1836 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
1837 mod_timer(&adapter->watchdog_timer, jiffies + 1); |
|
1838 } |
|
1839 |
|
1840 /* Reset on uncorrectable ECC error */ |
|
1841 if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { |
|
1842 u32 pbeccsts = er32(PBECCSTS); |
|
1843 |
|
1844 adapter->corr_errors += |
|
1845 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; |
|
1846 adapter->uncorr_errors += |
|
1847 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> |
|
1848 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; |
|
1849 |
|
1850 /* Do the reset outside of interrupt context */ |
|
1851 schedule_work(&adapter->reset_task); |
|
1852 |
|
1853 /* return immediately since reset is imminent */ |
|
1854 return IRQ_HANDLED; |
|
1855 } |
|
1856 |
|
1857 if (napi_schedule_prep(&adapter->napi)) { |
|
1858 adapter->total_tx_bytes = 0; |
|
1859 adapter->total_tx_packets = 0; |
|
1860 adapter->total_rx_bytes = 0; |
|
1861 adapter->total_rx_packets = 0; |
|
1862 __napi_schedule(&adapter->napi); |
|
1863 } |
|
1864 |
|
1865 return IRQ_HANDLED; |
|
1866 } |
|
1867 |
|
1868 static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) |
|
1869 { |
|
1870 struct net_device *netdev = data; |
|
1871 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1872 struct e1000_hw *hw = &adapter->hw; |
|
1873 u32 icr = er32(ICR); |
|
1874 |
|
1875 if (!(icr & E1000_ICR_INT_ASSERTED)) { |
|
1876 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
1877 ew32(IMS, E1000_IMS_OTHER); |
|
1878 return IRQ_NONE; |
|
1879 } |
|
1880 |
|
1881 if (icr & adapter->eiac_mask) |
|
1882 ew32(ICS, (icr & adapter->eiac_mask)); |
|
1883 |
|
1884 if (icr & E1000_ICR_OTHER) { |
|
1885 if (!(icr & E1000_ICR_LSC)) |
|
1886 goto no_link_interrupt; |
|
1887 hw->mac.get_link_status = true; |
|
1888 /* guard against interrupt when we're going down */ |
|
1889 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
1890 mod_timer(&adapter->watchdog_timer, jiffies + 1); |
|
1891 } |
|
1892 |
|
1893 no_link_interrupt: |
|
1894 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
1895 ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); |
|
1896 |
|
1897 return IRQ_HANDLED; |
|
1898 } |
|
1899 |
|
1900 static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data) |
|
1901 { |
|
1902 struct net_device *netdev = data; |
|
1903 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1904 struct e1000_hw *hw = &adapter->hw; |
|
1905 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
1906 |
|
1907 adapter->total_tx_bytes = 0; |
|
1908 adapter->total_tx_packets = 0; |
|
1909 |
|
1910 if (!e1000_clean_tx_irq(tx_ring)) |
|
1911 /* Ring was not completely cleaned, so fire another interrupt */ |
|
1912 ew32(ICS, tx_ring->ims_val); |
|
1913 |
|
1914 return IRQ_HANDLED; |
|
1915 } |
|
1916 |
|
1917 static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data) |
|
1918 { |
|
1919 struct net_device *netdev = data; |
|
1920 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1921 struct e1000_ring *rx_ring = adapter->rx_ring; |
|
1922 |
|
1923 /* Write the ITR value calculated at the end of the |
|
1924 * previous interrupt. |
|
1925 */ |
|
1926 if (rx_ring->set_itr) { |
|
1927 writel(1000000000 / (rx_ring->itr_val * 256), |
|
1928 rx_ring->itr_register); |
|
1929 rx_ring->set_itr = 0; |
|
1930 } |
|
1931 |
|
1932 if (napi_schedule_prep(&adapter->napi)) { |
|
1933 adapter->total_rx_bytes = 0; |
|
1934 adapter->total_rx_packets = 0; |
|
1935 __napi_schedule(&adapter->napi); |
|
1936 } |
|
1937 return IRQ_HANDLED; |
|
1938 } |
|
1939 |
|
1940 /** |
|
1941 * e1000_configure_msix - Configure MSI-X hardware |
|
1942 * |
|
1943 * e1000_configure_msix sets up the hardware to properly |
|
1944 * generate MSI-X interrupts. |
|
1945 **/ |
|
1946 static void e1000_configure_msix(struct e1000_adapter *adapter) |
|
1947 { |
|
1948 struct e1000_hw *hw = &adapter->hw; |
|
1949 struct e1000_ring *rx_ring = adapter->rx_ring; |
|
1950 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
1951 int vector = 0; |
|
1952 u32 ctrl_ext, ivar = 0; |
|
1953 |
|
1954 adapter->eiac_mask = 0; |
|
1955 |
|
1956 /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */ |
|
1957 if (hw->mac.type == e1000_82574) { |
|
1958 u32 rfctl = er32(RFCTL); |
|
1959 rfctl |= E1000_RFCTL_ACK_DIS; |
|
1960 ew32(RFCTL, rfctl); |
|
1961 } |
|
1962 |
|
1963 /* Configure Rx vector */ |
|
1964 rx_ring->ims_val = E1000_IMS_RXQ0; |
|
1965 adapter->eiac_mask |= rx_ring->ims_val; |
|
1966 if (rx_ring->itr_val) |
|
1967 writel(1000000000 / (rx_ring->itr_val * 256), |
|
1968 rx_ring->itr_register); |
|
1969 else |
|
1970 writel(1, rx_ring->itr_register); |
|
1971 ivar = E1000_IVAR_INT_ALLOC_VALID | vector; |
|
1972 |
|
1973 /* Configure Tx vector */ |
|
1974 tx_ring->ims_val = E1000_IMS_TXQ0; |
|
1975 vector++; |
|
1976 if (tx_ring->itr_val) |
|
1977 writel(1000000000 / (tx_ring->itr_val * 256), |
|
1978 tx_ring->itr_register); |
|
1979 else |
|
1980 writel(1, tx_ring->itr_register); |
|
1981 adapter->eiac_mask |= tx_ring->ims_val; |
|
1982 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8); |
|
1983 |
|
1984 /* set vector for Other Causes, e.g. link changes */ |
|
1985 vector++; |
|
1986 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16); |
|
1987 if (rx_ring->itr_val) |
|
1988 writel(1000000000 / (rx_ring->itr_val * 256), |
|
1989 hw->hw_addr + E1000_EITR_82574(vector)); |
|
1990 else |
|
1991 writel(1, hw->hw_addr + E1000_EITR_82574(vector)); |
|
1992 |
|
1993 /* Cause Tx interrupts on every write back */ |
|
1994 ivar |= (1 << 31); |
|
1995 |
|
1996 ew32(IVAR, ivar); |
|
1997 |
|
1998 /* enable MSI-X PBA support */ |
|
1999 ctrl_ext = er32(CTRL_EXT); |
|
2000 ctrl_ext |= E1000_CTRL_EXT_PBA_CLR; |
|
2001 |
|
2002 /* Auto-Mask Other interrupts upon ICR read */ |
|
2003 ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER); |
|
2004 ctrl_ext |= E1000_CTRL_EXT_EIAME; |
|
2005 ew32(CTRL_EXT, ctrl_ext); |
|
2006 e1e_flush(); |
|
2007 } |
|
2008 |
|
2009 void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter) |
|
2010 { |
|
2011 if (adapter->msix_entries) { |
|
2012 pci_disable_msix(adapter->pdev); |
|
2013 kfree(adapter->msix_entries); |
|
2014 adapter->msix_entries = NULL; |
|
2015 } else if (adapter->flags & FLAG_MSI_ENABLED) { |
|
2016 pci_disable_msi(adapter->pdev); |
|
2017 adapter->flags &= ~FLAG_MSI_ENABLED; |
|
2018 } |
|
2019 } |
|
2020 |
|
2021 /** |
|
2022 * e1000e_set_interrupt_capability - set MSI or MSI-X if supported |
|
2023 * |
|
2024 * Attempt to configure interrupts using the best available |
|
2025 * capabilities of the hardware and kernel. |
|
2026 **/ |
|
2027 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) |
|
2028 { |
|
2029 int err; |
|
2030 int i; |
|
2031 |
|
2032 switch (adapter->int_mode) { |
|
2033 case E1000E_INT_MODE_MSIX: |
|
2034 if (adapter->flags & FLAG_HAS_MSIX) { |
|
2035 adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */ |
|
2036 adapter->msix_entries = kcalloc(adapter->num_vectors, |
|
2037 sizeof(struct |
|
2038 msix_entry), |
|
2039 GFP_KERNEL); |
|
2040 if (adapter->msix_entries) { |
|
2041 for (i = 0; i < adapter->num_vectors; i++) |
|
2042 adapter->msix_entries[i].entry = i; |
|
2043 |
|
2044 err = pci_enable_msix(adapter->pdev, |
|
2045 adapter->msix_entries, |
|
2046 adapter->num_vectors); |
|
2047 if (err == 0) |
|
2048 return; |
|
2049 } |
|
2050 /* MSI-X failed, so fall through and try MSI */ |
|
2051 e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n"); |
|
2052 e1000e_reset_interrupt_capability(adapter); |
|
2053 } |
|
2054 adapter->int_mode = E1000E_INT_MODE_MSI; |
|
2055 /* Fall through */ |
|
2056 case E1000E_INT_MODE_MSI: |
|
2057 if (!pci_enable_msi(adapter->pdev)) { |
|
2058 adapter->flags |= FLAG_MSI_ENABLED; |
|
2059 } else { |
|
2060 adapter->int_mode = E1000E_INT_MODE_LEGACY; |
|
2061 e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n"); |
|
2062 } |
|
2063 /* Fall through */ |
|
2064 case E1000E_INT_MODE_LEGACY: |
|
2065 /* Don't do anything; this is the system default */ |
|
2066 break; |
|
2067 } |
|
2068 |
|
2069 /* store the number of vectors being used */ |
|
2070 adapter->num_vectors = 1; |
|
2071 } |
|
2072 |
|
2073 /** |
|
2074 * e1000_request_msix - Initialize MSI-X interrupts |
|
2075 * |
|
2076 * e1000_request_msix allocates MSI-X vectors and requests interrupts from the |
|
2077 * kernel. |
|
2078 **/ |
|
2079 static int e1000_request_msix(struct e1000_adapter *adapter) |
|
2080 { |
|
2081 struct net_device *netdev = adapter->netdev; |
|
2082 int err = 0, vector = 0; |
|
2083 |
|
2084 if (strlen(netdev->name) < (IFNAMSIZ - 5)) |
|
2085 snprintf(adapter->rx_ring->name, |
|
2086 sizeof(adapter->rx_ring->name) - 1, |
|
2087 "%s-rx-0", netdev->name); |
|
2088 else |
|
2089 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); |
|
2090 err = request_irq(adapter->msix_entries[vector].vector, |
|
2091 e1000_intr_msix_rx, 0, adapter->rx_ring->name, |
|
2092 netdev); |
|
2093 if (err) |
|
2094 return err; |
|
2095 adapter->rx_ring->itr_register = adapter->hw.hw_addr + |
|
2096 E1000_EITR_82574(vector); |
|
2097 adapter->rx_ring->itr_val = adapter->itr; |
|
2098 vector++; |
|
2099 |
|
2100 if (strlen(netdev->name) < (IFNAMSIZ - 5)) |
|
2101 snprintf(adapter->tx_ring->name, |
|
2102 sizeof(adapter->tx_ring->name) - 1, |
|
2103 "%s-tx-0", netdev->name); |
|
2104 else |
|
2105 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); |
|
2106 err = request_irq(adapter->msix_entries[vector].vector, |
|
2107 e1000_intr_msix_tx, 0, adapter->tx_ring->name, |
|
2108 netdev); |
|
2109 if (err) |
|
2110 return err; |
|
2111 adapter->tx_ring->itr_register = adapter->hw.hw_addr + |
|
2112 E1000_EITR_82574(vector); |
|
2113 adapter->tx_ring->itr_val = adapter->itr; |
|
2114 vector++; |
|
2115 |
|
2116 err = request_irq(adapter->msix_entries[vector].vector, |
|
2117 e1000_msix_other, 0, netdev->name, netdev); |
|
2118 if (err) |
|
2119 return err; |
|
2120 |
|
2121 e1000_configure_msix(adapter); |
|
2122 |
|
2123 return 0; |
|
2124 } |
|
2125 |
|
2126 /** |
|
2127 * e1000_request_irq - initialize interrupts |
|
2128 * |
|
2129 * Attempts to configure interrupts using the best available |
|
2130 * capabilities of the hardware and kernel. |
|
2131 **/ |
|
2132 static int e1000_request_irq(struct e1000_adapter *adapter) |
|
2133 { |
|
2134 struct net_device *netdev = adapter->netdev; |
|
2135 int err; |
|
2136 |
|
2137 if (adapter->msix_entries) { |
|
2138 err = e1000_request_msix(adapter); |
|
2139 if (!err) |
|
2140 return err; |
|
2141 /* fall back to MSI */ |
|
2142 e1000e_reset_interrupt_capability(adapter); |
|
2143 adapter->int_mode = E1000E_INT_MODE_MSI; |
|
2144 e1000e_set_interrupt_capability(adapter); |
|
2145 } |
|
2146 if (adapter->flags & FLAG_MSI_ENABLED) { |
|
2147 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0, |
|
2148 netdev->name, netdev); |
|
2149 if (!err) |
|
2150 return err; |
|
2151 |
|
2152 /* fall back to legacy interrupt */ |
|
2153 e1000e_reset_interrupt_capability(adapter); |
|
2154 adapter->int_mode = E1000E_INT_MODE_LEGACY; |
|
2155 } |
|
2156 |
|
2157 err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED, |
|
2158 netdev->name, netdev); |
|
2159 if (err) |
|
2160 e_err("Unable to allocate interrupt, Error: %d\n", err); |
|
2161 |
|
2162 return err; |
|
2163 } |
|
2164 |
|
2165 static void e1000_free_irq(struct e1000_adapter *adapter) |
|
2166 { |
|
2167 struct net_device *netdev = adapter->netdev; |
|
2168 |
|
2169 if (adapter->msix_entries) { |
|
2170 int vector = 0; |
|
2171 |
|
2172 free_irq(adapter->msix_entries[vector].vector, netdev); |
|
2173 vector++; |
|
2174 |
|
2175 free_irq(adapter->msix_entries[vector].vector, netdev); |
|
2176 vector++; |
|
2177 |
|
2178 /* Other Causes interrupt vector */ |
|
2179 free_irq(adapter->msix_entries[vector].vector, netdev); |
|
2180 return; |
|
2181 } |
|
2182 |
|
2183 free_irq(adapter->pdev->irq, netdev); |
|
2184 } |
|
2185 |
|
2186 /** |
|
2187 * e1000_irq_disable - Mask off interrupt generation on the NIC |
|
2188 **/ |
|
2189 static void e1000_irq_disable(struct e1000_adapter *adapter) |
|
2190 { |
|
2191 struct e1000_hw *hw = &adapter->hw; |
|
2192 |
|
2193 ew32(IMC, ~0); |
|
2194 if (adapter->msix_entries) |
|
2195 ew32(EIAC_82574, 0); |
|
2196 e1e_flush(); |
|
2197 |
|
2198 if (adapter->msix_entries) { |
|
2199 int i; |
|
2200 for (i = 0; i < adapter->num_vectors; i++) |
|
2201 synchronize_irq(adapter->msix_entries[i].vector); |
|
2202 } else { |
|
2203 synchronize_irq(adapter->pdev->irq); |
|
2204 } |
|
2205 } |
|
2206 |
|
2207 /** |
|
2208 * e1000_irq_enable - Enable default interrupt generation settings |
|
2209 **/ |
|
2210 static void e1000_irq_enable(struct e1000_adapter *adapter) |
|
2211 { |
|
2212 struct e1000_hw *hw = &adapter->hw; |
|
2213 |
|
2214 if (adapter->msix_entries) { |
|
2215 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); |
|
2216 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); |
|
2217 } else if (hw->mac.type == e1000_pch_lpt) { |
|
2218 ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); |
|
2219 } else { |
|
2220 ew32(IMS, IMS_ENABLE_MASK); |
|
2221 } |
|
2222 e1e_flush(); |
|
2223 } |
|
2224 |
|
2225 /** |
|
2226 * e1000e_get_hw_control - get control of the h/w from f/w |
|
2227 * @adapter: address of board private structure |
|
2228 * |
|
2229 * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. |
|
2230 * For ASF and Pass Through versions of f/w this means that |
|
2231 * the driver is loaded. For AMT version (only with 82573) |
|
2232 * of the f/w this means that the network i/f is open. |
|
2233 **/ |
|
2234 void e1000e_get_hw_control(struct e1000_adapter *adapter) |
|
2235 { |
|
2236 struct e1000_hw *hw = &adapter->hw; |
|
2237 u32 ctrl_ext; |
|
2238 u32 swsm; |
|
2239 |
|
2240 /* Let firmware know the driver has taken over */ |
|
2241 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { |
|
2242 swsm = er32(SWSM); |
|
2243 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); |
|
2244 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { |
|
2245 ctrl_ext = er32(CTRL_EXT); |
|
2246 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); |
|
2247 } |
|
2248 } |
|
2249 |
|
2250 /** |
|
2251 * e1000e_release_hw_control - release control of the h/w to f/w |
|
2252 * @adapter: address of board private structure |
|
2253 * |
|
2254 * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. |
|
2255 * For ASF and Pass Through versions of f/w this means that the |
|
2256 * driver is no longer loaded. For AMT version (only with 82573) i |
|
2257 * of the f/w this means that the network i/f is closed. |
|
2258 * |
|
2259 **/ |
|
2260 void e1000e_release_hw_control(struct e1000_adapter *adapter) |
|
2261 { |
|
2262 struct e1000_hw *hw = &adapter->hw; |
|
2263 u32 ctrl_ext; |
|
2264 u32 swsm; |
|
2265 |
|
2266 /* Let firmware taken over control of h/w */ |
|
2267 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) { |
|
2268 swsm = er32(SWSM); |
|
2269 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); |
|
2270 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { |
|
2271 ctrl_ext = er32(CTRL_EXT); |
|
2272 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); |
|
2273 } |
|
2274 } |
|
2275 |
|
2276 /** |
|
2277 * e1000_alloc_ring_dma - allocate memory for a ring structure |
|
2278 **/ |
|
2279 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, |
|
2280 struct e1000_ring *ring) |
|
2281 { |
|
2282 struct pci_dev *pdev = adapter->pdev; |
|
2283 |
|
2284 ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, |
|
2285 GFP_KERNEL); |
|
2286 if (!ring->desc) |
|
2287 return -ENOMEM; |
|
2288 |
|
2289 return 0; |
|
2290 } |
|
2291 |
|
2292 /** |
|
2293 * e1000e_setup_tx_resources - allocate Tx resources (Descriptors) |
|
2294 * @tx_ring: Tx descriptor ring |
|
2295 * |
|
2296 * Return 0 on success, negative on failure |
|
2297 **/ |
|
2298 int e1000e_setup_tx_resources(struct e1000_ring *tx_ring) |
|
2299 { |
|
2300 struct e1000_adapter *adapter = tx_ring->adapter; |
|
2301 int err = -ENOMEM, size; |
|
2302 |
|
2303 size = sizeof(struct e1000_buffer) * tx_ring->count; |
|
2304 tx_ring->buffer_info = vzalloc(size); |
|
2305 if (!tx_ring->buffer_info) |
|
2306 goto err; |
|
2307 |
|
2308 /* round up to nearest 4K */ |
|
2309 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); |
|
2310 tx_ring->size = ALIGN(tx_ring->size, 4096); |
|
2311 |
|
2312 err = e1000_alloc_ring_dma(adapter, tx_ring); |
|
2313 if (err) |
|
2314 goto err; |
|
2315 |
|
2316 tx_ring->next_to_use = 0; |
|
2317 tx_ring->next_to_clean = 0; |
|
2318 |
|
2319 return 0; |
|
2320 err: |
|
2321 vfree(tx_ring->buffer_info); |
|
2322 e_err("Unable to allocate memory for the transmit descriptor ring\n"); |
|
2323 return err; |
|
2324 } |
|
2325 |
|
2326 /** |
|
2327 * e1000e_setup_rx_resources - allocate Rx resources (Descriptors) |
|
2328 * @rx_ring: Rx descriptor ring |
|
2329 * |
|
2330 * Returns 0 on success, negative on failure |
|
2331 **/ |
|
2332 int e1000e_setup_rx_resources(struct e1000_ring *rx_ring) |
|
2333 { |
|
2334 struct e1000_adapter *adapter = rx_ring->adapter; |
|
2335 struct e1000_buffer *buffer_info; |
|
2336 int i, size, desc_len, err = -ENOMEM; |
|
2337 |
|
2338 size = sizeof(struct e1000_buffer) * rx_ring->count; |
|
2339 rx_ring->buffer_info = vzalloc(size); |
|
2340 if (!rx_ring->buffer_info) |
|
2341 goto err; |
|
2342 |
|
2343 for (i = 0; i < rx_ring->count; i++) { |
|
2344 buffer_info = &rx_ring->buffer_info[i]; |
|
2345 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS, |
|
2346 sizeof(struct e1000_ps_page), |
|
2347 GFP_KERNEL); |
|
2348 if (!buffer_info->ps_pages) |
|
2349 goto err_pages; |
|
2350 } |
|
2351 |
|
2352 desc_len = sizeof(union e1000_rx_desc_packet_split); |
|
2353 |
|
2354 /* Round up to nearest 4K */ |
|
2355 rx_ring->size = rx_ring->count * desc_len; |
|
2356 rx_ring->size = ALIGN(rx_ring->size, 4096); |
|
2357 |
|
2358 err = e1000_alloc_ring_dma(adapter, rx_ring); |
|
2359 if (err) |
|
2360 goto err_pages; |
|
2361 |
|
2362 rx_ring->next_to_clean = 0; |
|
2363 rx_ring->next_to_use = 0; |
|
2364 rx_ring->rx_skb_top = NULL; |
|
2365 |
|
2366 return 0; |
|
2367 |
|
2368 err_pages: |
|
2369 for (i = 0; i < rx_ring->count; i++) { |
|
2370 buffer_info = &rx_ring->buffer_info[i]; |
|
2371 kfree(buffer_info->ps_pages); |
|
2372 } |
|
2373 err: |
|
2374 vfree(rx_ring->buffer_info); |
|
2375 e_err("Unable to allocate memory for the receive descriptor ring\n"); |
|
2376 return err; |
|
2377 } |
|
2378 |
|
2379 /** |
|
2380 * e1000_clean_tx_ring - Free Tx Buffers |
|
2381 * @tx_ring: Tx descriptor ring |
|
2382 **/ |
|
2383 static void e1000_clean_tx_ring(struct e1000_ring *tx_ring) |
|
2384 { |
|
2385 struct e1000_adapter *adapter = tx_ring->adapter; |
|
2386 struct e1000_buffer *buffer_info; |
|
2387 unsigned long size; |
|
2388 unsigned int i; |
|
2389 |
|
2390 for (i = 0; i < tx_ring->count; i++) { |
|
2391 buffer_info = &tx_ring->buffer_info[i]; |
|
2392 e1000_put_txbuf(tx_ring, buffer_info); |
|
2393 } |
|
2394 |
|
2395 netdev_reset_queue(adapter->netdev); |
|
2396 size = sizeof(struct e1000_buffer) * tx_ring->count; |
|
2397 memset(tx_ring->buffer_info, 0, size); |
|
2398 |
|
2399 memset(tx_ring->desc, 0, tx_ring->size); |
|
2400 |
|
2401 tx_ring->next_to_use = 0; |
|
2402 tx_ring->next_to_clean = 0; |
|
2403 |
|
2404 writel(0, tx_ring->head); |
|
2405 if (tx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
2406 e1000e_update_tdt_wa(tx_ring, 0); |
|
2407 else |
|
2408 writel(0, tx_ring->tail); |
|
2409 } |
|
2410 |
|
2411 /** |
|
2412 * e1000e_free_tx_resources - Free Tx Resources per Queue |
|
2413 * @tx_ring: Tx descriptor ring |
|
2414 * |
|
2415 * Free all transmit software resources |
|
2416 **/ |
|
2417 void e1000e_free_tx_resources(struct e1000_ring *tx_ring) |
|
2418 { |
|
2419 struct e1000_adapter *adapter = tx_ring->adapter; |
|
2420 struct pci_dev *pdev = adapter->pdev; |
|
2421 |
|
2422 e1000_clean_tx_ring(tx_ring); |
|
2423 |
|
2424 vfree(tx_ring->buffer_info); |
|
2425 tx_ring->buffer_info = NULL; |
|
2426 |
|
2427 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, |
|
2428 tx_ring->dma); |
|
2429 tx_ring->desc = NULL; |
|
2430 } |
|
2431 |
|
2432 /** |
|
2433 * e1000e_free_rx_resources - Free Rx Resources |
|
2434 * @rx_ring: Rx descriptor ring |
|
2435 * |
|
2436 * Free all receive software resources |
|
2437 **/ |
|
2438 void e1000e_free_rx_resources(struct e1000_ring *rx_ring) |
|
2439 { |
|
2440 struct e1000_adapter *adapter = rx_ring->adapter; |
|
2441 struct pci_dev *pdev = adapter->pdev; |
|
2442 int i; |
|
2443 |
|
2444 e1000_clean_rx_ring(rx_ring); |
|
2445 |
|
2446 for (i = 0; i < rx_ring->count; i++) |
|
2447 kfree(rx_ring->buffer_info[i].ps_pages); |
|
2448 |
|
2449 vfree(rx_ring->buffer_info); |
|
2450 rx_ring->buffer_info = NULL; |
|
2451 |
|
2452 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, |
|
2453 rx_ring->dma); |
|
2454 rx_ring->desc = NULL; |
|
2455 } |
|
2456 |
|
2457 /** |
|
2458 * e1000_update_itr - update the dynamic ITR value based on statistics |
|
2459 * @adapter: pointer to adapter |
|
2460 * @itr_setting: current adapter->itr |
|
2461 * @packets: the number of packets during this measurement interval |
|
2462 * @bytes: the number of bytes during this measurement interval |
|
2463 * |
|
2464 * Stores a new ITR value based on packets and byte |
|
2465 * counts during the last interrupt. The advantage of per interrupt |
|
2466 * computation is faster updates and more accurate ITR for the current |
|
2467 * traffic pattern. Constants in this function were computed |
|
2468 * based on theoretical maximum wire speed and thresholds were set based |
|
2469 * on testing data as well as attempting to minimize response time |
|
2470 * while increasing bulk throughput. This functionality is controlled |
|
2471 * by the InterruptThrottleRate module parameter. |
|
2472 **/ |
|
2473 static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) |
|
2474 { |
|
2475 unsigned int retval = itr_setting; |
|
2476 |
|
2477 if (packets == 0) |
|
2478 return itr_setting; |
|
2479 |
|
2480 switch (itr_setting) { |
|
2481 case lowest_latency: |
|
2482 /* handle TSO and jumbo frames */ |
|
2483 if (bytes / packets > 8000) |
|
2484 retval = bulk_latency; |
|
2485 else if ((packets < 5) && (bytes > 512)) |
|
2486 retval = low_latency; |
|
2487 break; |
|
2488 case low_latency: /* 50 usec aka 20000 ints/s */ |
|
2489 if (bytes > 10000) { |
|
2490 /* this if handles the TSO accounting */ |
|
2491 if (bytes / packets > 8000) |
|
2492 retval = bulk_latency; |
|
2493 else if ((packets < 10) || ((bytes / packets) > 1200)) |
|
2494 retval = bulk_latency; |
|
2495 else if ((packets > 35)) |
|
2496 retval = lowest_latency; |
|
2497 } else if (bytes / packets > 2000) { |
|
2498 retval = bulk_latency; |
|
2499 } else if (packets <= 2 && bytes < 512) { |
|
2500 retval = lowest_latency; |
|
2501 } |
|
2502 break; |
|
2503 case bulk_latency: /* 250 usec aka 4000 ints/s */ |
|
2504 if (bytes > 25000) { |
|
2505 if (packets > 35) |
|
2506 retval = low_latency; |
|
2507 } else if (bytes < 6000) { |
|
2508 retval = low_latency; |
|
2509 } |
|
2510 break; |
|
2511 } |
|
2512 |
|
2513 return retval; |
|
2514 } |
|
2515 |
|
2516 static void e1000_set_itr(struct e1000_adapter *adapter) |
|
2517 { |
|
2518 u16 current_itr; |
|
2519 u32 new_itr = adapter->itr; |
|
2520 |
|
2521 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ |
|
2522 if (adapter->link_speed != SPEED_1000) { |
|
2523 current_itr = 0; |
|
2524 new_itr = 4000; |
|
2525 goto set_itr_now; |
|
2526 } |
|
2527 |
|
2528 if (adapter->flags2 & FLAG2_DISABLE_AIM) { |
|
2529 new_itr = 0; |
|
2530 goto set_itr_now; |
|
2531 } |
|
2532 |
|
2533 adapter->tx_itr = e1000_update_itr(adapter->tx_itr, |
|
2534 adapter->total_tx_packets, |
|
2535 adapter->total_tx_bytes); |
|
2536 /* conservative mode (itr 3) eliminates the lowest_latency setting */ |
|
2537 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency) |
|
2538 adapter->tx_itr = low_latency; |
|
2539 |
|
2540 adapter->rx_itr = e1000_update_itr(adapter->rx_itr, |
|
2541 adapter->total_rx_packets, |
|
2542 adapter->total_rx_bytes); |
|
2543 /* conservative mode (itr 3) eliminates the lowest_latency setting */ |
|
2544 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) |
|
2545 adapter->rx_itr = low_latency; |
|
2546 |
|
2547 current_itr = max(adapter->rx_itr, adapter->tx_itr); |
|
2548 |
|
2549 /* counts and packets in update_itr are dependent on these numbers */ |
|
2550 switch (current_itr) { |
|
2551 case lowest_latency: |
|
2552 new_itr = 70000; |
|
2553 break; |
|
2554 case low_latency: |
|
2555 new_itr = 20000; /* aka hwitr = ~200 */ |
|
2556 break; |
|
2557 case bulk_latency: |
|
2558 new_itr = 4000; |
|
2559 break; |
|
2560 default: |
|
2561 break; |
|
2562 } |
|
2563 |
|
2564 set_itr_now: |
|
2565 if (new_itr != adapter->itr) { |
|
2566 /* this attempts to bias the interrupt rate towards Bulk |
|
2567 * by adding intermediate steps when interrupt rate is |
|
2568 * increasing |
|
2569 */ |
|
2570 new_itr = new_itr > adapter->itr ? |
|
2571 min(adapter->itr + (new_itr >> 2), new_itr) : new_itr; |
|
2572 adapter->itr = new_itr; |
|
2573 adapter->rx_ring->itr_val = new_itr; |
|
2574 if (adapter->msix_entries) |
|
2575 adapter->rx_ring->set_itr = 1; |
|
2576 else |
|
2577 e1000e_write_itr(adapter, new_itr); |
|
2578 } |
|
2579 } |
|
2580 |
|
2581 /** |
|
2582 * e1000e_write_itr - write the ITR value to the appropriate registers |
|
2583 * @adapter: address of board private structure |
|
2584 * @itr: new ITR value to program |
|
2585 * |
|
2586 * e1000e_write_itr determines if the adapter is in MSI-X mode |
|
2587 * and, if so, writes the EITR registers with the ITR value. |
|
2588 * Otherwise, it writes the ITR value into the ITR register. |
|
2589 **/ |
|
2590 void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr) |
|
2591 { |
|
2592 struct e1000_hw *hw = &adapter->hw; |
|
2593 u32 new_itr = itr ? 1000000000 / (itr * 256) : 0; |
|
2594 |
|
2595 if (adapter->msix_entries) { |
|
2596 int vector; |
|
2597 |
|
2598 for (vector = 0; vector < adapter->num_vectors; vector++) |
|
2599 writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector)); |
|
2600 } else { |
|
2601 ew32(ITR, new_itr); |
|
2602 } |
|
2603 } |
|
2604 |
|
2605 /** |
|
2606 * e1000_alloc_queues - Allocate memory for all rings |
|
2607 * @adapter: board private structure to initialize |
|
2608 **/ |
|
2609 static int e1000_alloc_queues(struct e1000_adapter *adapter) |
|
2610 { |
|
2611 int size = sizeof(struct e1000_ring); |
|
2612 |
|
2613 adapter->tx_ring = kzalloc(size, GFP_KERNEL); |
|
2614 if (!adapter->tx_ring) |
|
2615 goto err; |
|
2616 adapter->tx_ring->count = adapter->tx_ring_count; |
|
2617 adapter->tx_ring->adapter = adapter; |
|
2618 |
|
2619 adapter->rx_ring = kzalloc(size, GFP_KERNEL); |
|
2620 if (!adapter->rx_ring) |
|
2621 goto err; |
|
2622 adapter->rx_ring->count = adapter->rx_ring_count; |
|
2623 adapter->rx_ring->adapter = adapter; |
|
2624 |
|
2625 return 0; |
|
2626 err: |
|
2627 e_err("Unable to allocate memory for queues\n"); |
|
2628 kfree(adapter->rx_ring); |
|
2629 kfree(adapter->tx_ring); |
|
2630 return -ENOMEM; |
|
2631 } |
|
2632 |
|
2633 /** |
|
2634 * e1000e_poll - NAPI Rx polling callback |
|
2635 * @napi: struct associated with this polling callback |
|
2636 * @weight: number of packets driver is allowed to process this poll |
|
2637 **/ |
|
2638 static int e1000e_poll(struct napi_struct *napi, int weight) |
|
2639 { |
|
2640 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, |
|
2641 napi); |
|
2642 struct e1000_hw *hw = &adapter->hw; |
|
2643 struct net_device *poll_dev = adapter->netdev; |
|
2644 int tx_cleaned = 1, work_done = 0; |
|
2645 |
|
2646 adapter = netdev_priv(poll_dev); |
|
2647 |
|
2648 if (!adapter->msix_entries || |
|
2649 (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) |
|
2650 tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring); |
|
2651 |
|
2652 adapter->clean_rx(adapter->rx_ring, &work_done, weight); |
|
2653 |
|
2654 if (!tx_cleaned) |
|
2655 work_done = weight; |
|
2656 |
|
2657 /* If weight not fully consumed, exit the polling mode */ |
|
2658 if (work_done < weight) { |
|
2659 if (adapter->itr_setting & 3) |
|
2660 e1000_set_itr(adapter); |
|
2661 napi_complete(napi); |
|
2662 if (!test_bit(__E1000_DOWN, &adapter->state)) { |
|
2663 if (adapter->msix_entries) |
|
2664 ew32(IMS, adapter->rx_ring->ims_val); |
|
2665 else |
|
2666 e1000_irq_enable(adapter); |
|
2667 } |
|
2668 } |
|
2669 |
|
2670 return work_done; |
|
2671 } |
|
2672 |
|
2673 static int e1000_vlan_rx_add_vid(struct net_device *netdev, |
|
2674 __always_unused __be16 proto, u16 vid) |
|
2675 { |
|
2676 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
2677 struct e1000_hw *hw = &adapter->hw; |
|
2678 u32 vfta, index; |
|
2679 |
|
2680 /* don't update vlan cookie if already programmed */ |
|
2681 if ((adapter->hw.mng_cookie.status & |
|
2682 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && |
|
2683 (vid == adapter->mng_vlan_id)) |
|
2684 return 0; |
|
2685 |
|
2686 /* add VID to filter table */ |
|
2687 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { |
|
2688 index = (vid >> 5) & 0x7F; |
|
2689 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); |
|
2690 vfta |= (1 << (vid & 0x1F)); |
|
2691 hw->mac.ops.write_vfta(hw, index, vfta); |
|
2692 } |
|
2693 |
|
2694 set_bit(vid, adapter->active_vlans); |
|
2695 |
|
2696 return 0; |
|
2697 } |
|
2698 |
|
2699 static int e1000_vlan_rx_kill_vid(struct net_device *netdev, |
|
2700 __always_unused __be16 proto, u16 vid) |
|
2701 { |
|
2702 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
2703 struct e1000_hw *hw = &adapter->hw; |
|
2704 u32 vfta, index; |
|
2705 |
|
2706 if ((adapter->hw.mng_cookie.status & |
|
2707 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && |
|
2708 (vid == adapter->mng_vlan_id)) { |
|
2709 /* release control to f/w */ |
|
2710 e1000e_release_hw_control(adapter); |
|
2711 return 0; |
|
2712 } |
|
2713 |
|
2714 /* remove VID from filter table */ |
|
2715 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { |
|
2716 index = (vid >> 5) & 0x7F; |
|
2717 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); |
|
2718 vfta &= ~(1 << (vid & 0x1F)); |
|
2719 hw->mac.ops.write_vfta(hw, index, vfta); |
|
2720 } |
|
2721 |
|
2722 clear_bit(vid, adapter->active_vlans); |
|
2723 |
|
2724 return 0; |
|
2725 } |
|
2726 |
|
2727 /** |
|
2728 * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering |
|
2729 * @adapter: board private structure to initialize |
|
2730 **/ |
|
2731 static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter) |
|
2732 { |
|
2733 struct net_device *netdev = adapter->netdev; |
|
2734 struct e1000_hw *hw = &adapter->hw; |
|
2735 u32 rctl; |
|
2736 |
|
2737 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { |
|
2738 /* disable VLAN receive filtering */ |
|
2739 rctl = er32(RCTL); |
|
2740 rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN); |
|
2741 ew32(RCTL, rctl); |
|
2742 |
|
2743 if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) { |
|
2744 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), |
|
2745 adapter->mng_vlan_id); |
|
2746 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; |
|
2747 } |
|
2748 } |
|
2749 } |
|
2750 |
|
2751 /** |
|
2752 * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering |
|
2753 * @adapter: board private structure to initialize |
|
2754 **/ |
|
2755 static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) |
|
2756 { |
|
2757 struct e1000_hw *hw = &adapter->hw; |
|
2758 u32 rctl; |
|
2759 |
|
2760 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { |
|
2761 /* enable VLAN receive filtering */ |
|
2762 rctl = er32(RCTL); |
|
2763 rctl |= E1000_RCTL_VFE; |
|
2764 rctl &= ~E1000_RCTL_CFIEN; |
|
2765 ew32(RCTL, rctl); |
|
2766 } |
|
2767 } |
|
2768 |
|
2769 /** |
|
2770 * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping |
|
2771 * @adapter: board private structure to initialize |
|
2772 **/ |
|
2773 static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) |
|
2774 { |
|
2775 struct e1000_hw *hw = &adapter->hw; |
|
2776 u32 ctrl; |
|
2777 |
|
2778 /* disable VLAN tag insert/strip */ |
|
2779 ctrl = er32(CTRL); |
|
2780 ctrl &= ~E1000_CTRL_VME; |
|
2781 ew32(CTRL, ctrl); |
|
2782 } |
|
2783 |
|
2784 /** |
|
2785 * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping |
|
2786 * @adapter: board private structure to initialize |
|
2787 **/ |
|
2788 static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter) |
|
2789 { |
|
2790 struct e1000_hw *hw = &adapter->hw; |
|
2791 u32 ctrl; |
|
2792 |
|
2793 /* enable VLAN tag insert/strip */ |
|
2794 ctrl = er32(CTRL); |
|
2795 ctrl |= E1000_CTRL_VME; |
|
2796 ew32(CTRL, ctrl); |
|
2797 } |
|
2798 |
|
2799 static void e1000_update_mng_vlan(struct e1000_adapter *adapter) |
|
2800 { |
|
2801 struct net_device *netdev = adapter->netdev; |
|
2802 u16 vid = adapter->hw.mng_cookie.vlan_id; |
|
2803 u16 old_vid = adapter->mng_vlan_id; |
|
2804 |
|
2805 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { |
|
2806 e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid); |
|
2807 adapter->mng_vlan_id = vid; |
|
2808 } |
|
2809 |
|
2810 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid)) |
|
2811 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid); |
|
2812 } |
|
2813 |
|
2814 static void e1000_restore_vlan(struct e1000_adapter *adapter) |
|
2815 { |
|
2816 u16 vid; |
|
2817 |
|
2818 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); |
|
2819 |
|
2820 for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) |
|
2821 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); |
|
2822 } |
|
2823 |
|
2824 static void e1000_init_manageability_pt(struct e1000_adapter *adapter) |
|
2825 { |
|
2826 struct e1000_hw *hw = &adapter->hw; |
|
2827 u32 manc, manc2h, mdef, i, j; |
|
2828 |
|
2829 if (!(adapter->flags & FLAG_MNG_PT_ENABLED)) |
|
2830 return; |
|
2831 |
|
2832 manc = er32(MANC); |
|
2833 |
|
2834 /* enable receiving management packets to the host. this will probably |
|
2835 * generate destination unreachable messages from the host OS, but |
|
2836 * the packets will be handled on SMBUS |
|
2837 */ |
|
2838 manc |= E1000_MANC_EN_MNG2HOST; |
|
2839 manc2h = er32(MANC2H); |
|
2840 |
|
2841 switch (hw->mac.type) { |
|
2842 default: |
|
2843 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664); |
|
2844 break; |
|
2845 case e1000_82574: |
|
2846 case e1000_82583: |
|
2847 /* Check if IPMI pass-through decision filter already exists; |
|
2848 * if so, enable it. |
|
2849 */ |
|
2850 for (i = 0, j = 0; i < 8; i++) { |
|
2851 mdef = er32(MDEF(i)); |
|
2852 |
|
2853 /* Ignore filters with anything other than IPMI ports */ |
|
2854 if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) |
|
2855 continue; |
|
2856 |
|
2857 /* Enable this decision filter in MANC2H */ |
|
2858 if (mdef) |
|
2859 manc2h |= (1 << i); |
|
2860 |
|
2861 j |= mdef; |
|
2862 } |
|
2863 |
|
2864 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664)) |
|
2865 break; |
|
2866 |
|
2867 /* Create new decision filter in an empty filter */ |
|
2868 for (i = 0, j = 0; i < 8; i++) |
|
2869 if (er32(MDEF(i)) == 0) { |
|
2870 ew32(MDEF(i), (E1000_MDEF_PORT_623 | |
|
2871 E1000_MDEF_PORT_664)); |
|
2872 manc2h |= (1 << 1); |
|
2873 j++; |
|
2874 break; |
|
2875 } |
|
2876 |
|
2877 if (!j) |
|
2878 e_warn("Unable to create IPMI pass-through filter\n"); |
|
2879 break; |
|
2880 } |
|
2881 |
|
2882 ew32(MANC2H, manc2h); |
|
2883 ew32(MANC, manc); |
|
2884 } |
|
2885 |
|
2886 /** |
|
2887 * e1000_configure_tx - Configure Transmit Unit after Reset |
|
2888 * @adapter: board private structure |
|
2889 * |
|
2890 * Configure the Tx unit of the MAC after a reset. |
|
2891 **/ |
|
2892 static void e1000_configure_tx(struct e1000_adapter *adapter) |
|
2893 { |
|
2894 struct e1000_hw *hw = &adapter->hw; |
|
2895 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
2896 u64 tdba; |
|
2897 u32 tdlen, tarc; |
|
2898 |
|
2899 /* Setup the HW Tx Head and Tail descriptor pointers */ |
|
2900 tdba = tx_ring->dma; |
|
2901 tdlen = tx_ring->count * sizeof(struct e1000_tx_desc); |
|
2902 ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32))); |
|
2903 ew32(TDBAH(0), (tdba >> 32)); |
|
2904 ew32(TDLEN(0), tdlen); |
|
2905 ew32(TDH(0), 0); |
|
2906 ew32(TDT(0), 0); |
|
2907 tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); |
|
2908 tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); |
|
2909 |
|
2910 /* Set the Tx Interrupt Delay register */ |
|
2911 ew32(TIDV, adapter->tx_int_delay); |
|
2912 /* Tx irq moderation */ |
|
2913 ew32(TADV, adapter->tx_abs_int_delay); |
|
2914 |
|
2915 if (adapter->flags2 & FLAG2_DMA_BURST) { |
|
2916 u32 txdctl = er32(TXDCTL(0)); |
|
2917 txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH | |
|
2918 E1000_TXDCTL_WTHRESH); |
|
2919 /* set up some performance related parameters to encourage the |
|
2920 * hardware to use the bus more efficiently in bursts, depends |
|
2921 * on the tx_int_delay to be enabled, |
|
2922 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls |
|
2923 * hthresh = 1 ==> prefetch when one or more available |
|
2924 * pthresh = 0x1f ==> prefetch if internal cache 31 or less |
|
2925 * BEWARE: this seems to work but should be considered first if |
|
2926 * there are Tx hangs or other Tx related bugs |
|
2927 */ |
|
2928 txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE; |
|
2929 ew32(TXDCTL(0), txdctl); |
|
2930 } |
|
2931 /* erratum work around: set txdctl the same for both queues */ |
|
2932 ew32(TXDCTL(1), er32(TXDCTL(0))); |
|
2933 |
|
2934 if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { |
|
2935 tarc = er32(TARC(0)); |
|
2936 /* set the speed mode bit, we'll clear it if we're not at |
|
2937 * gigabit link later |
|
2938 */ |
|
2939 #define SPEED_MODE_BIT (1 << 21) |
|
2940 tarc |= SPEED_MODE_BIT; |
|
2941 ew32(TARC(0), tarc); |
|
2942 } |
|
2943 |
|
2944 /* errata: program both queues to unweighted RR */ |
|
2945 if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { |
|
2946 tarc = er32(TARC(0)); |
|
2947 tarc |= 1; |
|
2948 ew32(TARC(0), tarc); |
|
2949 tarc = er32(TARC(1)); |
|
2950 tarc |= 1; |
|
2951 ew32(TARC(1), tarc); |
|
2952 } |
|
2953 |
|
2954 /* Setup Transmit Descriptor Settings for eop descriptor */ |
|
2955 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; |
|
2956 |
|
2957 /* only set IDE if we are delaying interrupts using the timers */ |
|
2958 if (adapter->tx_int_delay) |
|
2959 adapter->txd_cmd |= E1000_TXD_CMD_IDE; |
|
2960 |
|
2961 /* enable Report Status bit */ |
|
2962 adapter->txd_cmd |= E1000_TXD_CMD_RS; |
|
2963 |
|
2964 hw->mac.ops.config_collision_dist(hw); |
|
2965 } |
|
2966 |
|
2967 /** |
|
2968 * e1000_setup_rctl - configure the receive control registers |
|
2969 * @adapter: Board private structure |
|
2970 **/ |
|
2971 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ |
|
2972 (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) |
|
2973 static void e1000_setup_rctl(struct e1000_adapter *adapter) |
|
2974 { |
|
2975 struct e1000_hw *hw = &adapter->hw; |
|
2976 u32 rctl, rfctl; |
|
2977 u32 pages = 0; |
|
2978 |
|
2979 /* Workaround Si errata on PCHx - configure jumbo frame flow. |
|
2980 * If jumbo frames not set, program related MAC/PHY registers |
|
2981 * to h/w defaults |
|
2982 */ |
|
2983 if (hw->mac.type >= e1000_pch2lan) { |
|
2984 s32 ret_val; |
|
2985 |
|
2986 if (adapter->netdev->mtu > ETH_DATA_LEN) |
|
2987 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); |
|
2988 else |
|
2989 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); |
|
2990 |
|
2991 if (ret_val) |
|
2992 e_dbg("failed to enable|disable jumbo frame workaround mode\n"); |
|
2993 } |
|
2994 |
|
2995 /* Program MC offset vector base */ |
|
2996 rctl = er32(RCTL); |
|
2997 rctl &= ~(3 << E1000_RCTL_MO_SHIFT); |
|
2998 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | |
|
2999 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | |
|
3000 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); |
|
3001 |
|
3002 /* Do not Store bad packets */ |
|
3003 rctl &= ~E1000_RCTL_SBP; |
|
3004 |
|
3005 /* Enable Long Packet receive */ |
|
3006 if (adapter->netdev->mtu <= ETH_DATA_LEN) |
|
3007 rctl &= ~E1000_RCTL_LPE; |
|
3008 else |
|
3009 rctl |= E1000_RCTL_LPE; |
|
3010 |
|
3011 /* Some systems expect that the CRC is included in SMBUS traffic. The |
|
3012 * hardware strips the CRC before sending to both SMBUS (BMC) and to |
|
3013 * host memory when this is enabled |
|
3014 */ |
|
3015 if (adapter->flags2 & FLAG2_CRC_STRIPPING) |
|
3016 rctl |= E1000_RCTL_SECRC; |
|
3017 |
|
3018 /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */ |
|
3019 if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) { |
|
3020 u16 phy_data; |
|
3021 |
|
3022 e1e_rphy(hw, PHY_REG(770, 26), &phy_data); |
|
3023 phy_data &= 0xfff8; |
|
3024 phy_data |= (1 << 2); |
|
3025 e1e_wphy(hw, PHY_REG(770, 26), phy_data); |
|
3026 |
|
3027 e1e_rphy(hw, 22, &phy_data); |
|
3028 phy_data &= 0x0fff; |
|
3029 phy_data |= (1 << 14); |
|
3030 e1e_wphy(hw, 0x10, 0x2823); |
|
3031 e1e_wphy(hw, 0x11, 0x0003); |
|
3032 e1e_wphy(hw, 22, phy_data); |
|
3033 } |
|
3034 |
|
3035 /* Setup buffer sizes */ |
|
3036 rctl &= ~E1000_RCTL_SZ_4096; |
|
3037 rctl |= E1000_RCTL_BSEX; |
|
3038 switch (adapter->rx_buffer_len) { |
|
3039 case 2048: |
|
3040 default: |
|
3041 rctl |= E1000_RCTL_SZ_2048; |
|
3042 rctl &= ~E1000_RCTL_BSEX; |
|
3043 break; |
|
3044 case 4096: |
|
3045 rctl |= E1000_RCTL_SZ_4096; |
|
3046 break; |
|
3047 case 8192: |
|
3048 rctl |= E1000_RCTL_SZ_8192; |
|
3049 break; |
|
3050 case 16384: |
|
3051 rctl |= E1000_RCTL_SZ_16384; |
|
3052 break; |
|
3053 } |
|
3054 |
|
3055 /* Enable Extended Status in all Receive Descriptors */ |
|
3056 rfctl = er32(RFCTL); |
|
3057 rfctl |= E1000_RFCTL_EXTEN; |
|
3058 ew32(RFCTL, rfctl); |
|
3059 |
|
3060 /* 82571 and greater support packet-split where the protocol |
|
3061 * header is placed in skb->data and the packet data is |
|
3062 * placed in pages hanging off of skb_shinfo(skb)->nr_frags. |
|
3063 * In the case of a non-split, skb->data is linearly filled, |
|
3064 * followed by the page buffers. Therefore, skb->data is |
|
3065 * sized to hold the largest protocol header. |
|
3066 * |
|
3067 * allocations using alloc_page take too long for regular MTU |
|
3068 * so only enable packet split for jumbo frames |
|
3069 * |
|
3070 * Using pages when the page size is greater than 16k wastes |
|
3071 * a lot of memory, since we allocate 3 pages at all times |
|
3072 * per packet. |
|
3073 */ |
|
3074 pages = PAGE_USE_COUNT(adapter->netdev->mtu); |
|
3075 if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE)) |
|
3076 adapter->rx_ps_pages = pages; |
|
3077 else |
|
3078 adapter->rx_ps_pages = 0; |
|
3079 |
|
3080 if (adapter->rx_ps_pages) { |
|
3081 u32 psrctl = 0; |
|
3082 |
|
3083 /* Enable Packet split descriptors */ |
|
3084 rctl |= E1000_RCTL_DTYP_PS; |
|
3085 |
|
3086 psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; |
|
3087 |
|
3088 switch (adapter->rx_ps_pages) { |
|
3089 case 3: |
|
3090 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT; |
|
3091 /* fall-through */ |
|
3092 case 2: |
|
3093 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT; |
|
3094 /* fall-through */ |
|
3095 case 1: |
|
3096 psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT; |
|
3097 break; |
|
3098 } |
|
3099 |
|
3100 ew32(PSRCTL, psrctl); |
|
3101 } |
|
3102 |
|
3103 /* This is useful for sniffing bad packets. */ |
|
3104 if (adapter->netdev->features & NETIF_F_RXALL) { |
|
3105 /* UPE and MPE will be handled by normal PROMISC logic |
|
3106 * in e1000e_set_rx_mode |
|
3107 */ |
|
3108 rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ |
|
3109 E1000_RCTL_BAM | /* RX All Bcast Pkts */ |
|
3110 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ |
|
3111 |
|
3112 rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */ |
|
3113 E1000_RCTL_DPF | /* Allow filtered pause */ |
|
3114 E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */ |
|
3115 /* Do not mess with E1000_CTRL_VME, it affects transmit as well, |
|
3116 * and that breaks VLANs. |
|
3117 */ |
|
3118 } |
|
3119 |
|
3120 ew32(RCTL, rctl); |
|
3121 /* just started the receive unit, no need to restart */ |
|
3122 adapter->flags &= ~FLAG_RESTART_NOW; |
|
3123 } |
|
3124 |
|
3125 /** |
|
3126 * e1000_configure_rx - Configure Receive Unit after Reset |
|
3127 * @adapter: board private structure |
|
3128 * |
|
3129 * Configure the Rx unit of the MAC after a reset. |
|
3130 **/ |
|
3131 static void e1000_configure_rx(struct e1000_adapter *adapter) |
|
3132 { |
|
3133 struct e1000_hw *hw = &adapter->hw; |
|
3134 struct e1000_ring *rx_ring = adapter->rx_ring; |
|
3135 u64 rdba; |
|
3136 u32 rdlen, rctl, rxcsum, ctrl_ext; |
|
3137 |
|
3138 if (adapter->rx_ps_pages) { |
|
3139 /* this is a 32 byte descriptor */ |
|
3140 rdlen = rx_ring->count * |
|
3141 sizeof(union e1000_rx_desc_packet_split); |
|
3142 adapter->clean_rx = e1000_clean_rx_irq_ps; |
|
3143 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; |
|
3144 } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { |
|
3145 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended); |
|
3146 adapter->clean_rx = e1000_clean_jumbo_rx_irq; |
|
3147 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers; |
|
3148 } else { |
|
3149 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended); |
|
3150 adapter->clean_rx = e1000_clean_rx_irq; |
|
3151 adapter->alloc_rx_buf = e1000_alloc_rx_buffers; |
|
3152 } |
|
3153 |
|
3154 /* disable receives while setting up the descriptors */ |
|
3155 rctl = er32(RCTL); |
|
3156 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) |
|
3157 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
3158 e1e_flush(); |
|
3159 usleep_range(10000, 20000); |
|
3160 |
|
3161 if (adapter->flags2 & FLAG2_DMA_BURST) { |
|
3162 /* set the writeback threshold (only takes effect if the RDTR |
|
3163 * is set). set GRAN=1 and write back up to 0x4 worth, and |
|
3164 * enable prefetching of 0x20 Rx descriptors |
|
3165 * granularity = 01 |
|
3166 * wthresh = 04, |
|
3167 * hthresh = 04, |
|
3168 * pthresh = 0x20 |
|
3169 */ |
|
3170 ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE); |
|
3171 ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE); |
|
3172 |
|
3173 /* override the delay timers for enabling bursting, only if |
|
3174 * the value was not set by the user via module options |
|
3175 */ |
|
3176 if (adapter->rx_int_delay == DEFAULT_RDTR) |
|
3177 adapter->rx_int_delay = BURST_RDTR; |
|
3178 if (adapter->rx_abs_int_delay == DEFAULT_RADV) |
|
3179 adapter->rx_abs_int_delay = BURST_RADV; |
|
3180 } |
|
3181 |
|
3182 /* set the Receive Delay Timer Register */ |
|
3183 ew32(RDTR, adapter->rx_int_delay); |
|
3184 |
|
3185 /* irq moderation */ |
|
3186 ew32(RADV, adapter->rx_abs_int_delay); |
|
3187 if ((adapter->itr_setting != 0) && (adapter->itr != 0)) |
|
3188 e1000e_write_itr(adapter, adapter->itr); |
|
3189 |
|
3190 ctrl_ext = er32(CTRL_EXT); |
|
3191 /* Auto-Mask interrupts upon ICR access */ |
|
3192 ctrl_ext |= E1000_CTRL_EXT_IAME; |
|
3193 ew32(IAM, 0xffffffff); |
|
3194 ew32(CTRL_EXT, ctrl_ext); |
|
3195 e1e_flush(); |
|
3196 |
|
3197 /* Setup the HW Rx Head and Tail Descriptor Pointers and |
|
3198 * the Base and Length of the Rx Descriptor Ring |
|
3199 */ |
|
3200 rdba = rx_ring->dma; |
|
3201 ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32))); |
|
3202 ew32(RDBAH(0), (rdba >> 32)); |
|
3203 ew32(RDLEN(0), rdlen); |
|
3204 ew32(RDH(0), 0); |
|
3205 ew32(RDT(0), 0); |
|
3206 rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); |
|
3207 rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); |
|
3208 |
|
3209 /* Enable Receive Checksum Offload for TCP and UDP */ |
|
3210 rxcsum = er32(RXCSUM); |
|
3211 if (adapter->netdev->features & NETIF_F_RXCSUM) |
|
3212 rxcsum |= E1000_RXCSUM_TUOFL; |
|
3213 else |
|
3214 rxcsum &= ~E1000_RXCSUM_TUOFL; |
|
3215 ew32(RXCSUM, rxcsum); |
|
3216 |
|
3217 /* With jumbo frames, excessive C-state transition latencies result |
|
3218 * in dropped transactions. |
|
3219 */ |
|
3220 if (adapter->netdev->mtu > ETH_DATA_LEN) { |
|
3221 u32 lat = |
|
3222 ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 - |
|
3223 adapter->max_frame_size) * 8 / 1000; |
|
3224 |
|
3225 if (adapter->flags & FLAG_IS_ICH) { |
|
3226 u32 rxdctl = er32(RXDCTL(0)); |
|
3227 ew32(RXDCTL(0), rxdctl | 0x3); |
|
3228 } |
|
3229 |
|
3230 pm_qos_update_request(&adapter->netdev->pm_qos_req, lat); |
|
3231 } else { |
|
3232 pm_qos_update_request(&adapter->netdev->pm_qos_req, |
|
3233 PM_QOS_DEFAULT_VALUE); |
|
3234 } |
|
3235 |
|
3236 /* Enable Receives */ |
|
3237 ew32(RCTL, rctl); |
|
3238 } |
|
3239 |
|
3240 /** |
|
3241 * e1000e_write_mc_addr_list - write multicast addresses to MTA |
|
3242 * @netdev: network interface device structure |
|
3243 * |
|
3244 * Writes multicast address list to the MTA hash table. |
|
3245 * Returns: -ENOMEM on failure |
|
3246 * 0 on no addresses written |
|
3247 * X on writing X addresses to MTA |
|
3248 */ |
|
3249 static int e1000e_write_mc_addr_list(struct net_device *netdev) |
|
3250 { |
|
3251 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
3252 struct e1000_hw *hw = &adapter->hw; |
|
3253 struct netdev_hw_addr *ha; |
|
3254 u8 *mta_list; |
|
3255 int i; |
|
3256 |
|
3257 if (netdev_mc_empty(netdev)) { |
|
3258 /* nothing to program, so clear mc list */ |
|
3259 hw->mac.ops.update_mc_addr_list(hw, NULL, 0); |
|
3260 return 0; |
|
3261 } |
|
3262 |
|
3263 mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC); |
|
3264 if (!mta_list) |
|
3265 return -ENOMEM; |
|
3266 |
|
3267 /* update_mc_addr_list expects a packed array of only addresses. */ |
|
3268 i = 0; |
|
3269 netdev_for_each_mc_addr(ha, netdev) |
|
3270 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); |
|
3271 |
|
3272 hw->mac.ops.update_mc_addr_list(hw, mta_list, i); |
|
3273 kfree(mta_list); |
|
3274 |
|
3275 return netdev_mc_count(netdev); |
|
3276 } |
|
3277 |
|
3278 /** |
|
3279 * e1000e_write_uc_addr_list - write unicast addresses to RAR table |
|
3280 * @netdev: network interface device structure |
|
3281 * |
|
3282 * Writes unicast address list to the RAR table. |
|
3283 * Returns: -ENOMEM on failure/insufficient address space |
|
3284 * 0 on no addresses written |
|
3285 * X on writing X addresses to the RAR table |
|
3286 **/ |
|
3287 static int e1000e_write_uc_addr_list(struct net_device *netdev) |
|
3288 { |
|
3289 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
3290 struct e1000_hw *hw = &adapter->hw; |
|
3291 unsigned int rar_entries = hw->mac.rar_entry_count; |
|
3292 int count = 0; |
|
3293 |
|
3294 /* save a rar entry for our hardware address */ |
|
3295 rar_entries--; |
|
3296 |
|
3297 /* save a rar entry for the LAA workaround */ |
|
3298 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) |
|
3299 rar_entries--; |
|
3300 |
|
3301 /* return ENOMEM indicating insufficient memory for addresses */ |
|
3302 if (netdev_uc_count(netdev) > rar_entries) |
|
3303 return -ENOMEM; |
|
3304 |
|
3305 if (!netdev_uc_empty(netdev) && rar_entries) { |
|
3306 struct netdev_hw_addr *ha; |
|
3307 |
|
3308 /* write the addresses in reverse order to avoid write |
|
3309 * combining |
|
3310 */ |
|
3311 netdev_for_each_uc_addr(ha, netdev) { |
|
3312 if (!rar_entries) |
|
3313 break; |
|
3314 hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); |
|
3315 count++; |
|
3316 } |
|
3317 } |
|
3318 |
|
3319 /* zero out the remaining RAR entries not used above */ |
|
3320 for (; rar_entries > 0; rar_entries--) { |
|
3321 ew32(RAH(rar_entries), 0); |
|
3322 ew32(RAL(rar_entries), 0); |
|
3323 } |
|
3324 e1e_flush(); |
|
3325 |
|
3326 return count; |
|
3327 } |
|
3328 |
|
3329 /** |
|
3330 * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set |
|
3331 * @netdev: network interface device structure |
|
3332 * |
|
3333 * The ndo_set_rx_mode entry point is called whenever the unicast or multicast |
|
3334 * address list or the network interface flags are updated. This routine is |
|
3335 * responsible for configuring the hardware for proper unicast, multicast, |
|
3336 * promiscuous mode, and all-multi behavior. |
|
3337 **/ |
|
3338 static void e1000e_set_rx_mode(struct net_device *netdev) |
|
3339 { |
|
3340 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
3341 struct e1000_hw *hw = &adapter->hw; |
|
3342 u32 rctl; |
|
3343 |
|
3344 /* Check for Promiscuous and All Multicast modes */ |
|
3345 rctl = er32(RCTL); |
|
3346 |
|
3347 /* clear the affected bits */ |
|
3348 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); |
|
3349 |
|
3350 if (netdev->flags & IFF_PROMISC) { |
|
3351 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); |
|
3352 /* Do not hardware filter VLANs in promisc mode */ |
|
3353 e1000e_vlan_filter_disable(adapter); |
|
3354 } else { |
|
3355 int count; |
|
3356 |
|
3357 if (netdev->flags & IFF_ALLMULTI) { |
|
3358 rctl |= E1000_RCTL_MPE; |
|
3359 } else { |
|
3360 /* Write addresses to the MTA, if the attempt fails |
|
3361 * then we should just turn on promiscuous mode so |
|
3362 * that we can at least receive multicast traffic |
|
3363 */ |
|
3364 count = e1000e_write_mc_addr_list(netdev); |
|
3365 if (count < 0) |
|
3366 rctl |= E1000_RCTL_MPE; |
|
3367 } |
|
3368 e1000e_vlan_filter_enable(adapter); |
|
3369 /* Write addresses to available RAR registers, if there is not |
|
3370 * sufficient space to store all the addresses then enable |
|
3371 * unicast promiscuous mode |
|
3372 */ |
|
3373 count = e1000e_write_uc_addr_list(netdev); |
|
3374 if (count < 0) |
|
3375 rctl |= E1000_RCTL_UPE; |
|
3376 } |
|
3377 |
|
3378 ew32(RCTL, rctl); |
|
3379 |
|
3380 if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) |
|
3381 e1000e_vlan_strip_enable(adapter); |
|
3382 else |
|
3383 e1000e_vlan_strip_disable(adapter); |
|
3384 } |
|
3385 |
|
3386 static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) |
|
3387 { |
|
3388 struct e1000_hw *hw = &adapter->hw; |
|
3389 u32 mrqc, rxcsum; |
|
3390 int i; |
|
3391 static const u32 rsskey[10] = { |
|
3392 0xda565a6d, 0xc20e5b25, 0x3d256741, 0xb08fa343, 0xcb2bcad0, |
|
3393 0xb4307bae, 0xa32dcb77, 0x0cf23080, 0x3bb7426a, 0xfa01acbe |
|
3394 }; |
|
3395 |
|
3396 /* Fill out hash function seed */ |
|
3397 for (i = 0; i < 10; i++) |
|
3398 ew32(RSSRK(i), rsskey[i]); |
|
3399 |
|
3400 /* Direct all traffic to queue 0 */ |
|
3401 for (i = 0; i < 32; i++) |
|
3402 ew32(RETA(i), 0); |
|
3403 |
|
3404 /* Disable raw packet checksumming so that RSS hash is placed in |
|
3405 * descriptor on writeback. |
|
3406 */ |
|
3407 rxcsum = er32(RXCSUM); |
|
3408 rxcsum |= E1000_RXCSUM_PCSD; |
|
3409 |
|
3410 ew32(RXCSUM, rxcsum); |
|
3411 |
|
3412 mrqc = (E1000_MRQC_RSS_FIELD_IPV4 | |
|
3413 E1000_MRQC_RSS_FIELD_IPV4_TCP | |
|
3414 E1000_MRQC_RSS_FIELD_IPV6 | |
|
3415 E1000_MRQC_RSS_FIELD_IPV6_TCP | |
|
3416 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); |
|
3417 |
|
3418 ew32(MRQC, mrqc); |
|
3419 } |
|
3420 |
|
3421 /** |
|
3422 * e1000e_get_base_timinca - get default SYSTIM time increment attributes |
|
3423 * @adapter: board private structure |
|
3424 * @timinca: pointer to returned time increment attributes |
|
3425 * |
|
3426 * Get attributes for incrementing the System Time Register SYSTIML/H at |
|
3427 * the default base frequency, and set the cyclecounter shift value. |
|
3428 **/ |
|
3429 s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) |
|
3430 { |
|
3431 struct e1000_hw *hw = &adapter->hw; |
|
3432 u32 incvalue, incperiod, shift; |
|
3433 |
|
3434 /* Make sure clock is enabled on I217 before checking the frequency */ |
|
3435 if ((hw->mac.type == e1000_pch_lpt) && |
|
3436 !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && |
|
3437 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { |
|
3438 u32 fextnvm7 = er32(FEXTNVM7); |
|
3439 |
|
3440 if (!(fextnvm7 & (1 << 0))) { |
|
3441 ew32(FEXTNVM7, fextnvm7 | (1 << 0)); |
|
3442 e1e_flush(); |
|
3443 } |
|
3444 } |
|
3445 |
|
3446 switch (hw->mac.type) { |
|
3447 case e1000_pch2lan: |
|
3448 case e1000_pch_lpt: |
|
3449 /* On I217, the clock frequency is 25MHz or 96MHz as |
|
3450 * indicated by the System Clock Frequency Indication |
|
3451 */ |
|
3452 if ((hw->mac.type != e1000_pch_lpt) || |
|
3453 (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { |
|
3454 /* Stable 96MHz frequency */ |
|
3455 incperiod = INCPERIOD_96MHz; |
|
3456 incvalue = INCVALUE_96MHz; |
|
3457 shift = INCVALUE_SHIFT_96MHz; |
|
3458 adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; |
|
3459 break; |
|
3460 } |
|
3461 /* fall-through */ |
|
3462 case e1000_82574: |
|
3463 case e1000_82583: |
|
3464 /* Stable 25MHz frequency */ |
|
3465 incperiod = INCPERIOD_25MHz; |
|
3466 incvalue = INCVALUE_25MHz; |
|
3467 shift = INCVALUE_SHIFT_25MHz; |
|
3468 adapter->cc.shift = shift; |
|
3469 break; |
|
3470 default: |
|
3471 return -EINVAL; |
|
3472 } |
|
3473 |
|
3474 *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) | |
|
3475 ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK)); |
|
3476 |
|
3477 return 0; |
|
3478 } |
|
3479 |
|
3480 /** |
|
3481 * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable |
|
3482 * @adapter: board private structure |
|
3483 * |
|
3484 * Outgoing time stamping can be enabled and disabled. Play nice and |
|
3485 * disable it when requested, although it shouldn't cause any overhead |
|
3486 * when no packet needs it. At most one packet in the queue may be |
|
3487 * marked for time stamping, otherwise it would be impossible to tell |
|
3488 * for sure to which packet the hardware time stamp belongs. |
|
3489 * |
|
3490 * Incoming time stamping has to be configured via the hardware filters. |
|
3491 * Not all combinations are supported, in particular event type has to be |
|
3492 * specified. Matching the kind of event packet is not supported, with the |
|
3493 * exception of "all V2 events regardless of level 2 or 4". |
|
3494 **/ |
|
3495 static int e1000e_config_hwtstamp(struct e1000_adapter *adapter) |
|
3496 { |
|
3497 struct e1000_hw *hw = &adapter->hw; |
|
3498 struct hwtstamp_config *config = &adapter->hwtstamp_config; |
|
3499 u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; |
|
3500 u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; |
|
3501 u32 rxmtrl = 0; |
|
3502 u16 rxudp = 0; |
|
3503 bool is_l4 = false; |
|
3504 bool is_l2 = false; |
|
3505 u32 regval; |
|
3506 s32 ret_val; |
|
3507 |
|
3508 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) |
|
3509 return -EINVAL; |
|
3510 |
|
3511 /* flags reserved for future extensions - must be zero */ |
|
3512 if (config->flags) |
|
3513 return -EINVAL; |
|
3514 |
|
3515 switch (config->tx_type) { |
|
3516 case HWTSTAMP_TX_OFF: |
|
3517 tsync_tx_ctl = 0; |
|
3518 break; |
|
3519 case HWTSTAMP_TX_ON: |
|
3520 break; |
|
3521 default: |
|
3522 return -ERANGE; |
|
3523 } |
|
3524 |
|
3525 switch (config->rx_filter) { |
|
3526 case HWTSTAMP_FILTER_NONE: |
|
3527 tsync_rx_ctl = 0; |
|
3528 break; |
|
3529 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: |
|
3530 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; |
|
3531 rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE; |
|
3532 is_l4 = true; |
|
3533 break; |
|
3534 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: |
|
3535 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1; |
|
3536 rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE; |
|
3537 is_l4 = true; |
|
3538 break; |
|
3539 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: |
|
3540 /* Also time stamps V2 L2 Path Delay Request/Response */ |
|
3541 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; |
|
3542 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; |
|
3543 is_l2 = true; |
|
3544 break; |
|
3545 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: |
|
3546 /* Also time stamps V2 L2 Path Delay Request/Response. */ |
|
3547 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2; |
|
3548 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; |
|
3549 is_l2 = true; |
|
3550 break; |
|
3551 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: |
|
3552 /* Hardware cannot filter just V2 L4 Sync messages; |
|
3553 * fall-through to V2 (both L2 and L4) Sync. |
|
3554 */ |
|
3555 case HWTSTAMP_FILTER_PTP_V2_SYNC: |
|
3556 /* Also time stamps V2 Path Delay Request/Response. */ |
|
3557 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; |
|
3558 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE; |
|
3559 is_l2 = true; |
|
3560 is_l4 = true; |
|
3561 break; |
|
3562 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: |
|
3563 /* Hardware cannot filter just V2 L4 Delay Request messages; |
|
3564 * fall-through to V2 (both L2 and L4) Delay Request. |
|
3565 */ |
|
3566 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: |
|
3567 /* Also time stamps V2 Path Delay Request/Response. */ |
|
3568 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2; |
|
3569 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE; |
|
3570 is_l2 = true; |
|
3571 is_l4 = true; |
|
3572 break; |
|
3573 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: |
|
3574 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: |
|
3575 /* Hardware cannot filter just V2 L4 or L2 Event messages; |
|
3576 * fall-through to all V2 (both L2 and L4) Events. |
|
3577 */ |
|
3578 case HWTSTAMP_FILTER_PTP_V2_EVENT: |
|
3579 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2; |
|
3580 config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; |
|
3581 is_l2 = true; |
|
3582 is_l4 = true; |
|
3583 break; |
|
3584 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: |
|
3585 /* For V1, the hardware can only filter Sync messages or |
|
3586 * Delay Request messages but not both so fall-through to |
|
3587 * time stamp all packets. |
|
3588 */ |
|
3589 case HWTSTAMP_FILTER_ALL: |
|
3590 is_l2 = true; |
|
3591 is_l4 = true; |
|
3592 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL; |
|
3593 config->rx_filter = HWTSTAMP_FILTER_ALL; |
|
3594 break; |
|
3595 default: |
|
3596 return -ERANGE; |
|
3597 } |
|
3598 |
|
3599 /* enable/disable Tx h/w time stamping */ |
|
3600 regval = er32(TSYNCTXCTL); |
|
3601 regval &= ~E1000_TSYNCTXCTL_ENABLED; |
|
3602 regval |= tsync_tx_ctl; |
|
3603 ew32(TSYNCTXCTL, regval); |
|
3604 if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != |
|
3605 (regval & E1000_TSYNCTXCTL_ENABLED)) { |
|
3606 e_err("Timesync Tx Control register not set as expected\n"); |
|
3607 return -EAGAIN; |
|
3608 } |
|
3609 |
|
3610 /* enable/disable Rx h/w time stamping */ |
|
3611 regval = er32(TSYNCRXCTL); |
|
3612 regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK); |
|
3613 regval |= tsync_rx_ctl; |
|
3614 ew32(TSYNCRXCTL, regval); |
|
3615 if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED | |
|
3616 E1000_TSYNCRXCTL_TYPE_MASK)) != |
|
3617 (regval & (E1000_TSYNCRXCTL_ENABLED | |
|
3618 E1000_TSYNCRXCTL_TYPE_MASK))) { |
|
3619 e_err("Timesync Rx Control register not set as expected\n"); |
|
3620 return -EAGAIN; |
|
3621 } |
|
3622 |
|
3623 /* L2: define ethertype filter for time stamped packets */ |
|
3624 if (is_l2) |
|
3625 rxmtrl |= ETH_P_1588; |
|
3626 |
|
3627 /* define which PTP packets get time stamped */ |
|
3628 ew32(RXMTRL, rxmtrl); |
|
3629 |
|
3630 /* Filter by destination port */ |
|
3631 if (is_l4) { |
|
3632 rxudp = PTP_EV_PORT; |
|
3633 cpu_to_be16s(&rxudp); |
|
3634 } |
|
3635 ew32(RXUDP, rxudp); |
|
3636 |
|
3637 e1e_flush(); |
|
3638 |
|
3639 /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */ |
|
3640 er32(RXSTMPH); |
|
3641 er32(TXSTMPH); |
|
3642 |
|
3643 /* Get and set the System Time Register SYSTIM base frequency */ |
|
3644 ret_val = e1000e_get_base_timinca(adapter, ®val); |
|
3645 if (ret_val) |
|
3646 return ret_val; |
|
3647 ew32(TIMINCA, regval); |
|
3648 |
|
3649 /* reset the ns time counter */ |
|
3650 timecounter_init(&adapter->tc, &adapter->cc, |
|
3651 ktime_to_ns(ktime_get_real())); |
|
3652 |
|
3653 return 0; |
|
3654 } |
|
3655 |
|
3656 /** |
|
3657 * e1000_configure - configure the hardware for Rx and Tx |
|
3658 * @adapter: private board structure |
|
3659 **/ |
|
3660 static void e1000_configure(struct e1000_adapter *adapter) |
|
3661 { |
|
3662 struct e1000_ring *rx_ring = adapter->rx_ring; |
|
3663 |
|
3664 e1000e_set_rx_mode(adapter->netdev); |
|
3665 |
|
3666 e1000_restore_vlan(adapter); |
|
3667 e1000_init_manageability_pt(adapter); |
|
3668 |
|
3669 e1000_configure_tx(adapter); |
|
3670 |
|
3671 if (adapter->netdev->features & NETIF_F_RXHASH) |
|
3672 e1000e_setup_rss_hash(adapter); |
|
3673 e1000_setup_rctl(adapter); |
|
3674 e1000_configure_rx(adapter); |
|
3675 adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL); |
|
3676 } |
|
3677 |
|
3678 /** |
|
3679 * e1000e_power_up_phy - restore link in case the phy was powered down |
|
3680 * @adapter: address of board private structure |
|
3681 * |
|
3682 * The phy may be powered down to save power and turn off link when the |
|
3683 * driver is unloaded and wake on lan is not enabled (among others) |
|
3684 * *** this routine MUST be followed by a call to e1000e_reset *** |
|
3685 **/ |
|
3686 void e1000e_power_up_phy(struct e1000_adapter *adapter) |
|
3687 { |
|
3688 if (adapter->hw.phy.ops.power_up) |
|
3689 adapter->hw.phy.ops.power_up(&adapter->hw); |
|
3690 |
|
3691 adapter->hw.mac.ops.setup_link(&adapter->hw); |
|
3692 } |
|
3693 |
|
3694 /** |
|
3695 * e1000_power_down_phy - Power down the PHY |
|
3696 * |
|
3697 * Power down the PHY so no link is implied when interface is down. |
|
3698 * The PHY cannot be powered down if management or WoL is active. |
|
3699 */ |
|
3700 static void e1000_power_down_phy(struct e1000_adapter *adapter) |
|
3701 { |
|
3702 /* WoL is enabled */ |
|
3703 if (adapter->wol) |
|
3704 return; |
|
3705 |
|
3706 if (adapter->hw.phy.ops.power_down) |
|
3707 adapter->hw.phy.ops.power_down(&adapter->hw); |
|
3708 } |
|
3709 |
|
3710 /** |
|
3711 * e1000e_reset - bring the hardware into a known good state |
|
3712 * |
|
3713 * This function boots the hardware and enables some settings that |
|
3714 * require a configuration cycle of the hardware - those cannot be |
|
3715 * set/changed during runtime. After reset the device needs to be |
|
3716 * properly configured for Rx, Tx etc. |
|
3717 */ |
|
3718 void e1000e_reset(struct e1000_adapter *adapter) |
|
3719 { |
|
3720 struct e1000_mac_info *mac = &adapter->hw.mac; |
|
3721 struct e1000_fc_info *fc = &adapter->hw.fc; |
|
3722 struct e1000_hw *hw = &adapter->hw; |
|
3723 u32 tx_space, min_tx_space, min_rx_space; |
|
3724 u32 pba = adapter->pba; |
|
3725 u16 hwm; |
|
3726 |
|
3727 /* reset Packet Buffer Allocation to default */ |
|
3728 ew32(PBA, pba); |
|
3729 |
|
3730 if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { |
|
3731 /* To maintain wire speed transmits, the Tx FIFO should be |
|
3732 * large enough to accommodate two full transmit packets, |
|
3733 * rounded up to the next 1KB and expressed in KB. Likewise, |
|
3734 * the Rx FIFO should be large enough to accommodate at least |
|
3735 * one full receive packet and is similarly rounded up and |
|
3736 * expressed in KB. |
|
3737 */ |
|
3738 pba = er32(PBA); |
|
3739 /* upper 16 bits has Tx packet buffer allocation size in KB */ |
|
3740 tx_space = pba >> 16; |
|
3741 /* lower 16 bits has Rx packet buffer allocation size in KB */ |
|
3742 pba &= 0xffff; |
|
3743 /* the Tx fifo also stores 16 bytes of information about the Tx |
|
3744 * but don't include ethernet FCS because hardware appends it |
|
3745 */ |
|
3746 min_tx_space = (adapter->max_frame_size + |
|
3747 sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2; |
|
3748 min_tx_space = ALIGN(min_tx_space, 1024); |
|
3749 min_tx_space >>= 10; |
|
3750 /* software strips receive CRC, so leave room for it */ |
|
3751 min_rx_space = adapter->max_frame_size; |
|
3752 min_rx_space = ALIGN(min_rx_space, 1024); |
|
3753 min_rx_space >>= 10; |
|
3754 |
|
3755 /* If current Tx allocation is less than the min Tx FIFO size, |
|
3756 * and the min Tx FIFO size is less than the current Rx FIFO |
|
3757 * allocation, take space away from current Rx allocation |
|
3758 */ |
|
3759 if ((tx_space < min_tx_space) && |
|
3760 ((min_tx_space - tx_space) < pba)) { |
|
3761 pba -= min_tx_space - tx_space; |
|
3762 |
|
3763 /* if short on Rx space, Rx wins and must trump Tx |
|
3764 * adjustment |
|
3765 */ |
|
3766 if (pba < min_rx_space) |
|
3767 pba = min_rx_space; |
|
3768 } |
|
3769 |
|
3770 ew32(PBA, pba); |
|
3771 } |
|
3772 |
|
3773 /* flow control settings |
|
3774 * |
|
3775 * The high water mark must be low enough to fit one full frame |
|
3776 * (or the size used for early receive) above it in the Rx FIFO. |
|
3777 * Set it to the lower of: |
|
3778 * - 90% of the Rx FIFO size, and |
|
3779 * - the full Rx FIFO size minus one full frame |
|
3780 */ |
|
3781 if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) |
|
3782 fc->pause_time = 0xFFFF; |
|
3783 else |
|
3784 fc->pause_time = E1000_FC_PAUSE_TIME; |
|
3785 fc->send_xon = true; |
|
3786 fc->current_mode = fc->requested_mode; |
|
3787 |
|
3788 switch (hw->mac.type) { |
|
3789 case e1000_ich9lan: |
|
3790 case e1000_ich10lan: |
|
3791 if (adapter->netdev->mtu > ETH_DATA_LEN) { |
|
3792 pba = 14; |
|
3793 ew32(PBA, pba); |
|
3794 fc->high_water = 0x2800; |
|
3795 fc->low_water = fc->high_water - 8; |
|
3796 break; |
|
3797 } |
|
3798 /* fall-through */ |
|
3799 default: |
|
3800 hwm = min(((pba << 10) * 9 / 10), |
|
3801 ((pba << 10) - adapter->max_frame_size)); |
|
3802 |
|
3803 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ |
|
3804 fc->low_water = fc->high_water - 8; |
|
3805 break; |
|
3806 case e1000_pchlan: |
|
3807 /* Workaround PCH LOM adapter hangs with certain network |
|
3808 * loads. If hangs persist, try disabling Tx flow control. |
|
3809 */ |
|
3810 if (adapter->netdev->mtu > ETH_DATA_LEN) { |
|
3811 fc->high_water = 0x3500; |
|
3812 fc->low_water = 0x1500; |
|
3813 } else { |
|
3814 fc->high_water = 0x5000; |
|
3815 fc->low_water = 0x3000; |
|
3816 } |
|
3817 fc->refresh_time = 0x1000; |
|
3818 break; |
|
3819 case e1000_pch2lan: |
|
3820 case e1000_pch_lpt: |
|
3821 fc->refresh_time = 0x0400; |
|
3822 |
|
3823 if (adapter->netdev->mtu <= ETH_DATA_LEN) { |
|
3824 fc->high_water = 0x05C20; |
|
3825 fc->low_water = 0x05048; |
|
3826 fc->pause_time = 0x0650; |
|
3827 break; |
|
3828 } |
|
3829 |
|
3830 pba = 14; |
|
3831 ew32(PBA, pba); |
|
3832 fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH; |
|
3833 fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL; |
|
3834 break; |
|
3835 } |
|
3836 |
|
3837 /* Alignment of Tx data is on an arbitrary byte boundary with the |
|
3838 * maximum size per Tx descriptor limited only to the transmit |
|
3839 * allocation of the packet buffer minus 96 bytes with an upper |
|
3840 * limit of 24KB due to receive synchronization limitations. |
|
3841 */ |
|
3842 adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, |
|
3843 24 << 10); |
|
3844 |
|
3845 /* Disable Adaptive Interrupt Moderation if 2 full packets cannot |
|
3846 * fit in receive buffer. |
|
3847 */ |
|
3848 if (adapter->itr_setting & 0x3) { |
|
3849 if ((adapter->max_frame_size * 2) > (pba << 10)) { |
|
3850 if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) { |
|
3851 dev_info(&adapter->pdev->dev, |
|
3852 "Interrupt Throttle Rate off\n"); |
|
3853 adapter->flags2 |= FLAG2_DISABLE_AIM; |
|
3854 e1000e_write_itr(adapter, 0); |
|
3855 } |
|
3856 } else if (adapter->flags2 & FLAG2_DISABLE_AIM) { |
|
3857 dev_info(&adapter->pdev->dev, |
|
3858 "Interrupt Throttle Rate on\n"); |
|
3859 adapter->flags2 &= ~FLAG2_DISABLE_AIM; |
|
3860 adapter->itr = 20000; |
|
3861 e1000e_write_itr(adapter, adapter->itr); |
|
3862 } |
|
3863 } |
|
3864 |
|
3865 /* Allow time for pending master requests to run */ |
|
3866 mac->ops.reset_hw(hw); |
|
3867 |
|
3868 /* For parts with AMT enabled, let the firmware know |
|
3869 * that the network interface is in control |
|
3870 */ |
|
3871 if (adapter->flags & FLAG_HAS_AMT) |
|
3872 e1000e_get_hw_control(adapter); |
|
3873 |
|
3874 ew32(WUC, 0); |
|
3875 |
|
3876 if (mac->ops.init_hw(hw)) |
|
3877 e_err("Hardware Error\n"); |
|
3878 |
|
3879 e1000_update_mng_vlan(adapter); |
|
3880 |
|
3881 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ |
|
3882 ew32(VET, ETH_P_8021Q); |
|
3883 |
|
3884 e1000e_reset_adaptive(hw); |
|
3885 |
|
3886 /* initialize systim and reset the ns time counter */ |
|
3887 e1000e_config_hwtstamp(adapter); |
|
3888 |
|
3889 /* Set EEE advertisement as appropriate */ |
|
3890 if (adapter->flags2 & FLAG2_HAS_EEE) { |
|
3891 s32 ret_val; |
|
3892 u16 adv_addr; |
|
3893 |
|
3894 switch (hw->phy.type) { |
|
3895 case e1000_phy_82579: |
|
3896 adv_addr = I82579_EEE_ADVERTISEMENT; |
|
3897 break; |
|
3898 case e1000_phy_i217: |
|
3899 adv_addr = I217_EEE_ADVERTISEMENT; |
|
3900 break; |
|
3901 default: |
|
3902 dev_err(&adapter->pdev->dev, |
|
3903 "Invalid PHY type setting EEE advertisement\n"); |
|
3904 return; |
|
3905 } |
|
3906 |
|
3907 ret_val = hw->phy.ops.acquire(hw); |
|
3908 if (ret_val) { |
|
3909 dev_err(&adapter->pdev->dev, |
|
3910 "EEE advertisement - unable to acquire PHY\n"); |
|
3911 return; |
|
3912 } |
|
3913 |
|
3914 e1000_write_emi_reg_locked(hw, adv_addr, |
|
3915 hw->dev_spec.ich8lan.eee_disable ? |
|
3916 0 : adapter->eee_advert); |
|
3917 |
|
3918 hw->phy.ops.release(hw); |
|
3919 } |
|
3920 |
|
3921 if (!netif_running(adapter->netdev) && |
|
3922 !test_bit(__E1000_TESTING, &adapter->state)) { |
|
3923 e1000_power_down_phy(adapter); |
|
3924 return; |
|
3925 } |
|
3926 |
|
3927 e1000_get_phy_info(hw); |
|
3928 |
|
3929 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && |
|
3930 !(adapter->flags & FLAG_SMART_POWER_DOWN)) { |
|
3931 u16 phy_data = 0; |
|
3932 /* speed up time to link by disabling smart power down, ignore |
|
3933 * the return value of this function because there is nothing |
|
3934 * different we would do if it failed |
|
3935 */ |
|
3936 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); |
|
3937 phy_data &= ~IGP02E1000_PM_SPD; |
|
3938 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); |
|
3939 } |
|
3940 } |
|
3941 |
|
3942 int e1000e_up(struct e1000_adapter *adapter) |
|
3943 { |
|
3944 struct e1000_hw *hw = &adapter->hw; |
|
3945 |
|
3946 /* hardware has been reset, we need to reload some things */ |
|
3947 e1000_configure(adapter); |
|
3948 |
|
3949 clear_bit(__E1000_DOWN, &adapter->state); |
|
3950 |
|
3951 if (adapter->msix_entries) |
|
3952 e1000_configure_msix(adapter); |
|
3953 e1000_irq_enable(adapter); |
|
3954 |
|
3955 netif_start_queue(adapter->netdev); |
|
3956 |
|
3957 /* fire a link change interrupt to start the watchdog */ |
|
3958 if (adapter->msix_entries) |
|
3959 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); |
|
3960 else |
|
3961 ew32(ICS, E1000_ICS_LSC); |
|
3962 |
|
3963 return 0; |
|
3964 } |
|
3965 |
|
3966 static void e1000e_flush_descriptors(struct e1000_adapter *adapter) |
|
3967 { |
|
3968 struct e1000_hw *hw = &adapter->hw; |
|
3969 |
|
3970 if (!(adapter->flags2 & FLAG2_DMA_BURST)) |
|
3971 return; |
|
3972 |
|
3973 /* flush pending descriptor writebacks to memory */ |
|
3974 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); |
|
3975 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); |
|
3976 |
|
3977 /* execute the writes immediately */ |
|
3978 e1e_flush(); |
|
3979 |
|
3980 /* due to rare timing issues, write to TIDV/RDTR again to ensure the |
|
3981 * write is successful |
|
3982 */ |
|
3983 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); |
|
3984 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); |
|
3985 |
|
3986 /* execute the writes immediately */ |
|
3987 e1e_flush(); |
|
3988 } |
|
3989 |
|
3990 static void e1000e_update_stats(struct e1000_adapter *adapter); |
|
3991 |
|
3992 void e1000e_down(struct e1000_adapter *adapter) |
|
3993 { |
|
3994 struct net_device *netdev = adapter->netdev; |
|
3995 struct e1000_hw *hw = &adapter->hw; |
|
3996 u32 tctl, rctl; |
|
3997 |
|
3998 /* signal that we're down so the interrupt handler does not |
|
3999 * reschedule our watchdog timer |
|
4000 */ |
|
4001 set_bit(__E1000_DOWN, &adapter->state); |
|
4002 |
|
4003 /* disable receives in the hardware */ |
|
4004 rctl = er32(RCTL); |
|
4005 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) |
|
4006 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
4007 /* flush and sleep below */ |
|
4008 |
|
4009 netif_stop_queue(netdev); |
|
4010 |
|
4011 /* disable transmits in the hardware */ |
|
4012 tctl = er32(TCTL); |
|
4013 tctl &= ~E1000_TCTL_EN; |
|
4014 ew32(TCTL, tctl); |
|
4015 |
|
4016 /* flush both disables and wait for them to finish */ |
|
4017 e1e_flush(); |
|
4018 usleep_range(10000, 20000); |
|
4019 |
|
4020 e1000_irq_disable(adapter); |
|
4021 |
|
4022 napi_synchronize(&adapter->napi); |
|
4023 |
|
4024 del_timer_sync(&adapter->watchdog_timer); |
|
4025 del_timer_sync(&adapter->phy_info_timer); |
|
4026 |
|
4027 netif_carrier_off(netdev); |
|
4028 |
|
4029 spin_lock(&adapter->stats64_lock); |
|
4030 e1000e_update_stats(adapter); |
|
4031 spin_unlock(&adapter->stats64_lock); |
|
4032 |
|
4033 e1000e_flush_descriptors(adapter); |
|
4034 e1000_clean_tx_ring(adapter->tx_ring); |
|
4035 e1000_clean_rx_ring(adapter->rx_ring); |
|
4036 |
|
4037 adapter->link_speed = 0; |
|
4038 adapter->link_duplex = 0; |
|
4039 |
|
4040 /* Disable Si errata workaround on PCHx for jumbo frame flow */ |
|
4041 if ((hw->mac.type >= e1000_pch2lan) && |
|
4042 (adapter->netdev->mtu > ETH_DATA_LEN) && |
|
4043 e1000_lv_jumbo_workaround_ich8lan(hw, false)) |
|
4044 e_dbg("failed to disable jumbo frame workaround mode\n"); |
|
4045 |
|
4046 if (!pci_channel_offline(adapter->pdev)) |
|
4047 e1000e_reset(adapter); |
|
4048 |
|
4049 /* TODO: for power management, we could drop the link and |
|
4050 * pci_disable_device here. |
|
4051 */ |
|
4052 } |
|
4053 |
|
4054 void e1000e_reinit_locked(struct e1000_adapter *adapter) |
|
4055 { |
|
4056 might_sleep(); |
|
4057 while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) |
|
4058 usleep_range(1000, 2000); |
|
4059 e1000e_down(adapter); |
|
4060 e1000e_up(adapter); |
|
4061 clear_bit(__E1000_RESETTING, &adapter->state); |
|
4062 } |
|
4063 |
|
4064 /** |
|
4065 * e1000e_cyclecounter_read - read raw cycle counter (used by time counter) |
|
4066 * @cc: cyclecounter structure |
|
4067 **/ |
|
4068 static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) |
|
4069 { |
|
4070 struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, |
|
4071 cc); |
|
4072 struct e1000_hw *hw = &adapter->hw; |
|
4073 cycle_t systim; |
|
4074 |
|
4075 /* latch SYSTIMH on read of SYSTIML */ |
|
4076 systim = (cycle_t)er32(SYSTIML); |
|
4077 systim |= (cycle_t)er32(SYSTIMH) << 32; |
|
4078 |
|
4079 return systim; |
|
4080 } |
|
4081 |
|
4082 /** |
|
4083 * e1000_sw_init - Initialize general software structures (struct e1000_adapter) |
|
4084 * @adapter: board private structure to initialize |
|
4085 * |
|
4086 * e1000_sw_init initializes the Adapter private data structure. |
|
4087 * Fields are initialized based on PCI device information and |
|
4088 * OS network device settings (MTU size). |
|
4089 **/ |
|
4090 static int e1000_sw_init(struct e1000_adapter *adapter) |
|
4091 { |
|
4092 struct net_device *netdev = adapter->netdev; |
|
4093 |
|
4094 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; |
|
4095 adapter->rx_ps_bsize0 = 128; |
|
4096 adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
|
4097 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; |
|
4098 adapter->tx_ring_count = E1000_DEFAULT_TXD; |
|
4099 adapter->rx_ring_count = E1000_DEFAULT_RXD; |
|
4100 |
|
4101 spin_lock_init(&adapter->stats64_lock); |
|
4102 |
|
4103 e1000e_set_interrupt_capability(adapter); |
|
4104 |
|
4105 if (e1000_alloc_queues(adapter)) |
|
4106 return -ENOMEM; |
|
4107 |
|
4108 /* Setup hardware time stamping cyclecounter */ |
|
4109 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { |
|
4110 adapter->cc.read = e1000e_cyclecounter_read; |
|
4111 adapter->cc.mask = CLOCKSOURCE_MASK(64); |
|
4112 adapter->cc.mult = 1; |
|
4113 /* cc.shift set in e1000e_get_base_tininca() */ |
|
4114 |
|
4115 spin_lock_init(&adapter->systim_lock); |
|
4116 INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work); |
|
4117 } |
|
4118 |
|
4119 /* Explicitly disable IRQ since the NIC can be in any state. */ |
|
4120 e1000_irq_disable(adapter); |
|
4121 |
|
4122 set_bit(__E1000_DOWN, &adapter->state); |
|
4123 return 0; |
|
4124 } |
|
4125 |
|
4126 /** |
|
4127 * e1000_intr_msi_test - Interrupt Handler |
|
4128 * @irq: interrupt number |
|
4129 * @data: pointer to a network interface device structure |
|
4130 **/ |
|
4131 static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data) |
|
4132 { |
|
4133 struct net_device *netdev = data; |
|
4134 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
4135 struct e1000_hw *hw = &adapter->hw; |
|
4136 u32 icr = er32(ICR); |
|
4137 |
|
4138 e_dbg("icr is %08X\n", icr); |
|
4139 if (icr & E1000_ICR_RXSEQ) { |
|
4140 adapter->flags &= ~FLAG_MSI_TEST_FAILED; |
|
4141 /* Force memory writes to complete before acknowledging the |
|
4142 * interrupt is handled. |
|
4143 */ |
|
4144 wmb(); |
|
4145 } |
|
4146 |
|
4147 return IRQ_HANDLED; |
|
4148 } |
|
4149 |
|
4150 /** |
|
4151 * e1000_test_msi_interrupt - Returns 0 for successful test |
|
4152 * @adapter: board private struct |
|
4153 * |
|
4154 * code flow taken from tg3.c |
|
4155 **/ |
|
4156 static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) |
|
4157 { |
|
4158 struct net_device *netdev = adapter->netdev; |
|
4159 struct e1000_hw *hw = &adapter->hw; |
|
4160 int err; |
|
4161 |
|
4162 /* poll_enable hasn't been called yet, so don't need disable */ |
|
4163 /* clear any pending events */ |
|
4164 er32(ICR); |
|
4165 |
|
4166 /* free the real vector and request a test handler */ |
|
4167 e1000_free_irq(adapter); |
|
4168 e1000e_reset_interrupt_capability(adapter); |
|
4169 |
|
4170 /* Assume that the test fails, if it succeeds then the test |
|
4171 * MSI irq handler will unset this flag |
|
4172 */ |
|
4173 adapter->flags |= FLAG_MSI_TEST_FAILED; |
|
4174 |
|
4175 err = pci_enable_msi(adapter->pdev); |
|
4176 if (err) |
|
4177 goto msi_test_failed; |
|
4178 |
|
4179 err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0, |
|
4180 netdev->name, netdev); |
|
4181 if (err) { |
|
4182 pci_disable_msi(adapter->pdev); |
|
4183 goto msi_test_failed; |
|
4184 } |
|
4185 |
|
4186 /* Force memory writes to complete before enabling and firing an |
|
4187 * interrupt. |
|
4188 */ |
|
4189 wmb(); |
|
4190 |
|
4191 e1000_irq_enable(adapter); |
|
4192 |
|
4193 /* fire an unusual interrupt on the test handler */ |
|
4194 ew32(ICS, E1000_ICS_RXSEQ); |
|
4195 e1e_flush(); |
|
4196 msleep(100); |
|
4197 |
|
4198 e1000_irq_disable(adapter); |
|
4199 |
|
4200 rmb(); /* read flags after interrupt has been fired */ |
|
4201 |
|
4202 if (adapter->flags & FLAG_MSI_TEST_FAILED) { |
|
4203 adapter->int_mode = E1000E_INT_MODE_LEGACY; |
|
4204 e_info("MSI interrupt test failed, using legacy interrupt.\n"); |
|
4205 } else { |
|
4206 e_dbg("MSI interrupt test succeeded!\n"); |
|
4207 } |
|
4208 |
|
4209 free_irq(adapter->pdev->irq, netdev); |
|
4210 pci_disable_msi(adapter->pdev); |
|
4211 |
|
4212 msi_test_failed: |
|
4213 e1000e_set_interrupt_capability(adapter); |
|
4214 return e1000_request_irq(adapter); |
|
4215 } |
|
4216 |
|
4217 /** |
|
4218 * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored |
|
4219 * @adapter: board private struct |
|
4220 * |
|
4221 * code flow taken from tg3.c, called with e1000 interrupts disabled. |
|
4222 **/ |
|
4223 static int e1000_test_msi(struct e1000_adapter *adapter) |
|
4224 { |
|
4225 int err; |
|
4226 u16 pci_cmd; |
|
4227 |
|
4228 if (!(adapter->flags & FLAG_MSI_ENABLED)) |
|
4229 return 0; |
|
4230 |
|
4231 /* disable SERR in case the MSI write causes a master abort */ |
|
4232 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); |
|
4233 if (pci_cmd & PCI_COMMAND_SERR) |
|
4234 pci_write_config_word(adapter->pdev, PCI_COMMAND, |
|
4235 pci_cmd & ~PCI_COMMAND_SERR); |
|
4236 |
|
4237 err = e1000_test_msi_interrupt(adapter); |
|
4238 |
|
4239 /* re-enable SERR */ |
|
4240 if (pci_cmd & PCI_COMMAND_SERR) { |
|
4241 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd); |
|
4242 pci_cmd |= PCI_COMMAND_SERR; |
|
4243 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd); |
|
4244 } |
|
4245 |
|
4246 return err; |
|
4247 } |
|
4248 |
|
4249 /** |
|
4250 * e1000_open - Called when a network interface is made active |
|
4251 * @netdev: network interface device structure |
|
4252 * |
|
4253 * Returns 0 on success, negative value on failure |
|
4254 * |
|
4255 * The open entry point is called when a network interface is made |
|
4256 * active by the system (IFF_UP). At this point all resources needed |
|
4257 * for transmit and receive operations are allocated, the interrupt |
|
4258 * handler is registered with the OS, the watchdog timer is started, |
|
4259 * and the stack is notified that the interface is ready. |
|
4260 **/ |
|
4261 static int e1000_open(struct net_device *netdev) |
|
4262 { |
|
4263 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
4264 struct e1000_hw *hw = &adapter->hw; |
|
4265 struct pci_dev *pdev = adapter->pdev; |
|
4266 int err; |
|
4267 |
|
4268 /* disallow open during test */ |
|
4269 if (test_bit(__E1000_TESTING, &adapter->state)) |
|
4270 return -EBUSY; |
|
4271 |
|
4272 pm_runtime_get_sync(&pdev->dev); |
|
4273 |
|
4274 netif_carrier_off(netdev); |
|
4275 |
|
4276 /* allocate transmit descriptors */ |
|
4277 err = e1000e_setup_tx_resources(adapter->tx_ring); |
|
4278 if (err) |
|
4279 goto err_setup_tx; |
|
4280 |
|
4281 /* allocate receive descriptors */ |
|
4282 err = e1000e_setup_rx_resources(adapter->rx_ring); |
|
4283 if (err) |
|
4284 goto err_setup_rx; |
|
4285 |
|
4286 /* If AMT is enabled, let the firmware know that the network |
|
4287 * interface is now open and reset the part to a known state. |
|
4288 */ |
|
4289 if (adapter->flags & FLAG_HAS_AMT) { |
|
4290 e1000e_get_hw_control(adapter); |
|
4291 e1000e_reset(adapter); |
|
4292 } |
|
4293 |
|
4294 e1000e_power_up_phy(adapter); |
|
4295 |
|
4296 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; |
|
4297 if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) |
|
4298 e1000_update_mng_vlan(adapter); |
|
4299 |
|
4300 /* DMA latency requirement to workaround jumbo issue */ |
|
4301 pm_qos_add_request(&adapter->netdev->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, |
|
4302 PM_QOS_DEFAULT_VALUE); |
|
4303 |
|
4304 /* before we allocate an interrupt, we must be ready to handle it. |
|
4305 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt |
|
4306 * as soon as we call pci_request_irq, so we have to setup our |
|
4307 * clean_rx handler before we do so. |
|
4308 */ |
|
4309 e1000_configure(adapter); |
|
4310 |
|
4311 err = e1000_request_irq(adapter); |
|
4312 if (err) |
|
4313 goto err_req_irq; |
|
4314 |
|
4315 /* Work around PCIe errata with MSI interrupts causing some chipsets to |
|
4316 * ignore e1000e MSI messages, which means we need to test our MSI |
|
4317 * interrupt now |
|
4318 */ |
|
4319 if (adapter->int_mode != E1000E_INT_MODE_LEGACY) { |
|
4320 err = e1000_test_msi(adapter); |
|
4321 if (err) { |
|
4322 e_err("Interrupt allocation failed\n"); |
|
4323 goto err_req_irq; |
|
4324 } |
|
4325 } |
|
4326 |
|
4327 /* From here on the code is the same as e1000e_up() */ |
|
4328 clear_bit(__E1000_DOWN, &adapter->state); |
|
4329 |
|
4330 napi_enable(&adapter->napi); |
|
4331 |
|
4332 e1000_irq_enable(adapter); |
|
4333 |
|
4334 adapter->tx_hang_recheck = false; |
|
4335 netif_start_queue(netdev); |
|
4336 |
|
4337 adapter->idle_check = true; |
|
4338 hw->mac.get_link_status = true; |
|
4339 pm_runtime_put(&pdev->dev); |
|
4340 |
|
4341 /* fire a link status change interrupt to start the watchdog */ |
|
4342 if (adapter->msix_entries) |
|
4343 ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER); |
|
4344 else |
|
4345 ew32(ICS, E1000_ICS_LSC); |
|
4346 |
|
4347 return 0; |
|
4348 |
|
4349 err_req_irq: |
|
4350 e1000e_release_hw_control(adapter); |
|
4351 e1000_power_down_phy(adapter); |
|
4352 e1000e_free_rx_resources(adapter->rx_ring); |
|
4353 err_setup_rx: |
|
4354 e1000e_free_tx_resources(adapter->tx_ring); |
|
4355 err_setup_tx: |
|
4356 e1000e_reset(adapter); |
|
4357 pm_runtime_put_sync(&pdev->dev); |
|
4358 |
|
4359 return err; |
|
4360 } |
|
4361 |
|
4362 /** |
|
4363 * e1000_close - Disables a network interface |
|
4364 * @netdev: network interface device structure |
|
4365 * |
|
4366 * Returns 0, this is not allowed to fail |
|
4367 * |
|
4368 * The close entry point is called when an interface is de-activated |
|
4369 * by the OS. The hardware is still under the drivers control, but |
|
4370 * needs to be disabled. A global MAC reset is issued to stop the |
|
4371 * hardware, and all transmit and receive resources are freed. |
|
4372 **/ |
|
4373 static int e1000_close(struct net_device *netdev) |
|
4374 { |
|
4375 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
4376 struct pci_dev *pdev = adapter->pdev; |
|
4377 int count = E1000_CHECK_RESET_COUNT; |
|
4378 |
|
4379 while (test_bit(__E1000_RESETTING, &adapter->state) && count--) |
|
4380 usleep_range(10000, 20000); |
|
4381 |
|
4382 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); |
|
4383 |
|
4384 pm_runtime_get_sync(&pdev->dev); |
|
4385 |
|
4386 if (!test_bit(__E1000_DOWN, &adapter->state)) { |
|
4387 e1000e_down(adapter); |
|
4388 e1000_free_irq(adapter); |
|
4389 } |
|
4390 |
|
4391 napi_disable(&adapter->napi); |
|
4392 |
|
4393 e1000_power_down_phy(adapter); |
|
4394 |
|
4395 e1000e_free_tx_resources(adapter->tx_ring); |
|
4396 e1000e_free_rx_resources(adapter->rx_ring); |
|
4397 |
|
4398 /* kill manageability vlan ID if supported, but not if a vlan with |
|
4399 * the same ID is registered on the host OS (let 8021q kill it) |
|
4400 */ |
|
4401 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) |
|
4402 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), |
|
4403 adapter->mng_vlan_id); |
|
4404 |
|
4405 /* If AMT is enabled, let the firmware know that the network |
|
4406 * interface is now closed |
|
4407 */ |
|
4408 if ((adapter->flags & FLAG_HAS_AMT) && |
|
4409 !test_bit(__E1000_TESTING, &adapter->state)) |
|
4410 e1000e_release_hw_control(adapter); |
|
4411 |
|
4412 pm_qos_remove_request(&adapter->netdev->pm_qos_req); |
|
4413 |
|
4414 pm_runtime_put_sync(&pdev->dev); |
|
4415 |
|
4416 return 0; |
|
4417 } |
|
4418 |
|
4419 /** |
|
4420 * e1000_set_mac - Change the Ethernet Address of the NIC |
|
4421 * @netdev: network interface device structure |
|
4422 * @p: pointer to an address structure |
|
4423 * |
|
4424 * Returns 0 on success, negative on failure |
|
4425 **/ |
|
4426 static int e1000_set_mac(struct net_device *netdev, void *p) |
|
4427 { |
|
4428 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
4429 struct e1000_hw *hw = &adapter->hw; |
|
4430 struct sockaddr *addr = p; |
|
4431 |
|
4432 if (!is_valid_ether_addr(addr->sa_data)) |
|
4433 return -EADDRNOTAVAIL; |
|
4434 |
|
4435 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
|
4436 memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); |
|
4437 |
|
4438 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0); |
|
4439 |
|
4440 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) { |
|
4441 /* activate the work around */ |
|
4442 e1000e_set_laa_state_82571(&adapter->hw, 1); |
|
4443 |
|
4444 /* Hold a copy of the LAA in RAR[14] This is done so that |
|
4445 * between the time RAR[0] gets clobbered and the time it |
|
4446 * gets fixed (in e1000_watchdog), the actual LAA is in one |
|
4447 * of the RARs and no incoming packets directed to this port |
|
4448 * are dropped. Eventually the LAA will be in RAR[0] and |
|
4449 * RAR[14] |
|
4450 */ |
|
4451 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, |
|
4452 adapter->hw.mac.rar_entry_count - 1); |
|
4453 } |
|
4454 |
|
4455 return 0; |
|
4456 } |
|
4457 |
|
4458 /** |
|
4459 * e1000e_update_phy_task - work thread to update phy |
|
4460 * @work: pointer to our work struct |
|
4461 * |
|
4462 * this worker thread exists because we must acquire a |
|
4463 * semaphore to read the phy, which we could msleep while |
|
4464 * waiting for it, and we can't msleep in a timer. |
|
4465 **/ |
|
4466 static void e1000e_update_phy_task(struct work_struct *work) |
|
4467 { |
|
4468 struct e1000_adapter *adapter = container_of(work, |
|
4469 struct e1000_adapter, |
|
4470 update_phy_task); |
|
4471 |
|
4472 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
4473 return; |
|
4474 |
|
4475 e1000_get_phy_info(&adapter->hw); |
|
4476 } |
|
4477 |
|
4478 /** |
|
4479 * e1000_update_phy_info - timre call-back to update PHY info |
|
4480 * @data: pointer to adapter cast into an unsigned long |
|
4481 * |
|
4482 * Need to wait a few seconds after link up to get diagnostic information from |
|
4483 * the phy |
|
4484 **/ |
|
4485 static void e1000_update_phy_info(unsigned long data) |
|
4486 { |
|
4487 struct e1000_adapter *adapter = (struct e1000_adapter *)data; |
|
4488 |
|
4489 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
4490 return; |
|
4491 |
|
4492 schedule_work(&adapter->update_phy_task); |
|
4493 } |
|
4494 |
|
4495 /** |
|
4496 * e1000e_update_phy_stats - Update the PHY statistics counters |
|
4497 * @adapter: board private structure |
|
4498 * |
|
4499 * Read/clear the upper 16-bit PHY registers and read/accumulate lower |
|
4500 **/ |
|
4501 static void e1000e_update_phy_stats(struct e1000_adapter *adapter) |
|
4502 { |
|
4503 struct e1000_hw *hw = &adapter->hw; |
|
4504 s32 ret_val; |
|
4505 u16 phy_data; |
|
4506 |
|
4507 ret_val = hw->phy.ops.acquire(hw); |
|
4508 if (ret_val) |
|
4509 return; |
|
4510 |
|
4511 /* A page set is expensive so check if already on desired page. |
|
4512 * If not, set to the page with the PHY status registers. |
|
4513 */ |
|
4514 hw->phy.addr = 1; |
|
4515 ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, |
|
4516 &phy_data); |
|
4517 if (ret_val) |
|
4518 goto release; |
|
4519 if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) { |
|
4520 ret_val = hw->phy.ops.set_page(hw, |
|
4521 HV_STATS_PAGE << IGP_PAGE_SHIFT); |
|
4522 if (ret_val) |
|
4523 goto release; |
|
4524 } |
|
4525 |
|
4526 /* Single Collision Count */ |
|
4527 hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data); |
|
4528 ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data); |
|
4529 if (!ret_val) |
|
4530 adapter->stats.scc += phy_data; |
|
4531 |
|
4532 /* Excessive Collision Count */ |
|
4533 hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data); |
|
4534 ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data); |
|
4535 if (!ret_val) |
|
4536 adapter->stats.ecol += phy_data; |
|
4537 |
|
4538 /* Multiple Collision Count */ |
|
4539 hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data); |
|
4540 ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data); |
|
4541 if (!ret_val) |
|
4542 adapter->stats.mcc += phy_data; |
|
4543 |
|
4544 /* Late Collision Count */ |
|
4545 hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data); |
|
4546 ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data); |
|
4547 if (!ret_val) |
|
4548 adapter->stats.latecol += phy_data; |
|
4549 |
|
4550 /* Collision Count - also used for adaptive IFS */ |
|
4551 hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data); |
|
4552 ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data); |
|
4553 if (!ret_val) |
|
4554 hw->mac.collision_delta = phy_data; |
|
4555 |
|
4556 /* Defer Count */ |
|
4557 hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data); |
|
4558 ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data); |
|
4559 if (!ret_val) |
|
4560 adapter->stats.dc += phy_data; |
|
4561 |
|
4562 /* Transmit with no CRS */ |
|
4563 hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data); |
|
4564 ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data); |
|
4565 if (!ret_val) |
|
4566 adapter->stats.tncrs += phy_data; |
|
4567 |
|
4568 release: |
|
4569 hw->phy.ops.release(hw); |
|
4570 } |
|
4571 |
|
4572 /** |
|
4573 * e1000e_update_stats - Update the board statistics counters |
|
4574 * @adapter: board private structure |
|
4575 **/ |
|
4576 static void e1000e_update_stats(struct e1000_adapter *adapter) |
|
4577 { |
|
4578 struct net_device *netdev = adapter->netdev; |
|
4579 struct e1000_hw *hw = &adapter->hw; |
|
4580 struct pci_dev *pdev = adapter->pdev; |
|
4581 |
|
4582 /* Prevent stats update while adapter is being reset, or if the pci |
|
4583 * connection is down. |
|
4584 */ |
|
4585 if (adapter->link_speed == 0) |
|
4586 return; |
|
4587 if (pci_channel_offline(pdev)) |
|
4588 return; |
|
4589 |
|
4590 adapter->stats.crcerrs += er32(CRCERRS); |
|
4591 adapter->stats.gprc += er32(GPRC); |
|
4592 adapter->stats.gorc += er32(GORCL); |
|
4593 er32(GORCH); /* Clear gorc */ |
|
4594 adapter->stats.bprc += er32(BPRC); |
|
4595 adapter->stats.mprc += er32(MPRC); |
|
4596 adapter->stats.roc += er32(ROC); |
|
4597 |
|
4598 adapter->stats.mpc += er32(MPC); |
|
4599 |
|
4600 /* Half-duplex statistics */ |
|
4601 if (adapter->link_duplex == HALF_DUPLEX) { |
|
4602 if (adapter->flags2 & FLAG2_HAS_PHY_STATS) { |
|
4603 e1000e_update_phy_stats(adapter); |
|
4604 } else { |
|
4605 adapter->stats.scc += er32(SCC); |
|
4606 adapter->stats.ecol += er32(ECOL); |
|
4607 adapter->stats.mcc += er32(MCC); |
|
4608 adapter->stats.latecol += er32(LATECOL); |
|
4609 adapter->stats.dc += er32(DC); |
|
4610 |
|
4611 hw->mac.collision_delta = er32(COLC); |
|
4612 |
|
4613 if ((hw->mac.type != e1000_82574) && |
|
4614 (hw->mac.type != e1000_82583)) |
|
4615 adapter->stats.tncrs += er32(TNCRS); |
|
4616 } |
|
4617 adapter->stats.colc += hw->mac.collision_delta; |
|
4618 } |
|
4619 |
|
4620 adapter->stats.xonrxc += er32(XONRXC); |
|
4621 adapter->stats.xontxc += er32(XONTXC); |
|
4622 adapter->stats.xoffrxc += er32(XOFFRXC); |
|
4623 adapter->stats.xofftxc += er32(XOFFTXC); |
|
4624 adapter->stats.gptc += er32(GPTC); |
|
4625 adapter->stats.gotc += er32(GOTCL); |
|
4626 er32(GOTCH); /* Clear gotc */ |
|
4627 adapter->stats.rnbc += er32(RNBC); |
|
4628 adapter->stats.ruc += er32(RUC); |
|
4629 |
|
4630 adapter->stats.mptc += er32(MPTC); |
|
4631 adapter->stats.bptc += er32(BPTC); |
|
4632 |
|
4633 /* used for adaptive IFS */ |
|
4634 |
|
4635 hw->mac.tx_packet_delta = er32(TPT); |
|
4636 adapter->stats.tpt += hw->mac.tx_packet_delta; |
|
4637 |
|
4638 adapter->stats.algnerrc += er32(ALGNERRC); |
|
4639 adapter->stats.rxerrc += er32(RXERRC); |
|
4640 adapter->stats.cexterr += er32(CEXTERR); |
|
4641 adapter->stats.tsctc += er32(TSCTC); |
|
4642 adapter->stats.tsctfc += er32(TSCTFC); |
|
4643 |
|
4644 /* Fill out the OS statistics structure */ |
|
4645 netdev->stats.multicast = adapter->stats.mprc; |
|
4646 netdev->stats.collisions = adapter->stats.colc; |
|
4647 |
|
4648 /* Rx Errors */ |
|
4649 |
|
4650 /* RLEC on some newer hardware can be incorrect so build |
|
4651 * our own version based on RUC and ROC |
|
4652 */ |
|
4653 netdev->stats.rx_errors = adapter->stats.rxerrc + |
|
4654 adapter->stats.crcerrs + adapter->stats.algnerrc + |
|
4655 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; |
|
4656 netdev->stats.rx_length_errors = adapter->stats.ruc + |
|
4657 adapter->stats.roc; |
|
4658 netdev->stats.rx_crc_errors = adapter->stats.crcerrs; |
|
4659 netdev->stats.rx_frame_errors = adapter->stats.algnerrc; |
|
4660 netdev->stats.rx_missed_errors = adapter->stats.mpc; |
|
4661 |
|
4662 /* Tx Errors */ |
|
4663 netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol; |
|
4664 netdev->stats.tx_aborted_errors = adapter->stats.ecol; |
|
4665 netdev->stats.tx_window_errors = adapter->stats.latecol; |
|
4666 netdev->stats.tx_carrier_errors = adapter->stats.tncrs; |
|
4667 |
|
4668 /* Tx Dropped needs to be maintained elsewhere */ |
|
4669 |
|
4670 /* Management Stats */ |
|
4671 adapter->stats.mgptc += er32(MGTPTC); |
|
4672 adapter->stats.mgprc += er32(MGTPRC); |
|
4673 adapter->stats.mgpdc += er32(MGTPDC); |
|
4674 |
|
4675 /* Correctable ECC Errors */ |
|
4676 if (hw->mac.type == e1000_pch_lpt) { |
|
4677 u32 pbeccsts = er32(PBECCSTS); |
|
4678 adapter->corr_errors += |
|
4679 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; |
|
4680 adapter->uncorr_errors += |
|
4681 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> |
|
4682 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; |
|
4683 } |
|
4684 } |
|
4685 |
|
4686 /** |
|
4687 * e1000_phy_read_status - Update the PHY register status snapshot |
|
4688 * @adapter: board private structure |
|
4689 **/ |
|
4690 static void e1000_phy_read_status(struct e1000_adapter *adapter) |
|
4691 { |
|
4692 struct e1000_hw *hw = &adapter->hw; |
|
4693 struct e1000_phy_regs *phy = &adapter->phy_regs; |
|
4694 |
|
4695 if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) && |
|
4696 (er32(STATUS) & E1000_STATUS_LU) && |
|
4697 (adapter->hw.phy.media_type == e1000_media_type_copper)) { |
|
4698 int ret_val; |
|
4699 |
|
4700 ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); |
|
4701 ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); |
|
4702 ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); |
|
4703 ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa); |
|
4704 ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion); |
|
4705 ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000); |
|
4706 ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000); |
|
4707 ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); |
|
4708 if (ret_val) |
|
4709 e_warn("Error reading PHY register\n"); |
|
4710 } else { |
|
4711 /* Do not read PHY registers if link is not up |
|
4712 * Set values to typical power-on defaults |
|
4713 */ |
|
4714 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); |
|
4715 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | |
|
4716 BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE | |
|
4717 BMSR_ERCAP); |
|
4718 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP | |
|
4719 ADVERTISE_ALL | ADVERTISE_CSMA); |
|
4720 phy->lpa = 0; |
|
4721 phy->expansion = EXPANSION_ENABLENPAGE; |
|
4722 phy->ctrl1000 = ADVERTISE_1000FULL; |
|
4723 phy->stat1000 = 0; |
|
4724 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); |
|
4725 } |
|
4726 } |
|
4727 |
|
4728 static void e1000_print_link_info(struct e1000_adapter *adapter) |
|
4729 { |
|
4730 struct e1000_hw *hw = &adapter->hw; |
|
4731 u32 ctrl = er32(CTRL); |
|
4732 |
|
4733 /* Link status message must follow this format for user tools */ |
|
4734 pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", |
|
4735 adapter->netdev->name, adapter->link_speed, |
|
4736 adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half", |
|
4737 (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : |
|
4738 (ctrl & E1000_CTRL_RFCE) ? "Rx" : |
|
4739 (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None"); |
|
4740 } |
|
4741 |
|
4742 static bool e1000e_has_link(struct e1000_adapter *adapter) |
|
4743 { |
|
4744 struct e1000_hw *hw = &adapter->hw; |
|
4745 bool link_active = false; |
|
4746 s32 ret_val = 0; |
|
4747 |
|
4748 /* get_link_status is set on LSC (link status) interrupt or |
|
4749 * Rx sequence error interrupt. get_link_status will stay |
|
4750 * false until the check_for_link establishes link |
|
4751 * for copper adapters ONLY |
|
4752 */ |
|
4753 switch (hw->phy.media_type) { |
|
4754 case e1000_media_type_copper: |
|
4755 if (hw->mac.get_link_status) { |
|
4756 ret_val = hw->mac.ops.check_for_link(hw); |
|
4757 link_active = !hw->mac.get_link_status; |
|
4758 } else { |
|
4759 link_active = true; |
|
4760 } |
|
4761 break; |
|
4762 case e1000_media_type_fiber: |
|
4763 ret_val = hw->mac.ops.check_for_link(hw); |
|
4764 link_active = !!(er32(STATUS) & E1000_STATUS_LU); |
|
4765 break; |
|
4766 case e1000_media_type_internal_serdes: |
|
4767 ret_val = hw->mac.ops.check_for_link(hw); |
|
4768 link_active = adapter->hw.mac.serdes_has_link; |
|
4769 break; |
|
4770 default: |
|
4771 case e1000_media_type_unknown: |
|
4772 break; |
|
4773 } |
|
4774 |
|
4775 if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && |
|
4776 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { |
|
4777 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ |
|
4778 e_info("Gigabit has been disabled, downgrading speed\n"); |
|
4779 } |
|
4780 |
|
4781 return link_active; |
|
4782 } |
|
4783 |
|
4784 static void e1000e_enable_receives(struct e1000_adapter *adapter) |
|
4785 { |
|
4786 /* make sure the receive unit is started */ |
|
4787 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && |
|
4788 (adapter->flags & FLAG_RESTART_NOW)) { |
|
4789 struct e1000_hw *hw = &adapter->hw; |
|
4790 u32 rctl = er32(RCTL); |
|
4791 ew32(RCTL, rctl | E1000_RCTL_EN); |
|
4792 adapter->flags &= ~FLAG_RESTART_NOW; |
|
4793 } |
|
4794 } |
|
4795 |
|
4796 static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) |
|
4797 { |
|
4798 struct e1000_hw *hw = &adapter->hw; |
|
4799 |
|
4800 /* With 82574 controllers, PHY needs to be checked periodically |
|
4801 * for hung state and reset, if two calls return true |
|
4802 */ |
|
4803 if (e1000_check_phy_82574(hw)) |
|
4804 adapter->phy_hang_count++; |
|
4805 else |
|
4806 adapter->phy_hang_count = 0; |
|
4807 |
|
4808 if (adapter->phy_hang_count > 1) { |
|
4809 adapter->phy_hang_count = 0; |
|
4810 schedule_work(&adapter->reset_task); |
|
4811 } |
|
4812 } |
|
4813 |
|
4814 /** |
|
4815 * e1000_watchdog - Timer Call-back |
|
4816 * @data: pointer to adapter cast into an unsigned long |
|
4817 **/ |
|
4818 static void e1000_watchdog(unsigned long data) |
|
4819 { |
|
4820 struct e1000_adapter *adapter = (struct e1000_adapter *)data; |
|
4821 |
|
4822 /* Do the rest outside of interrupt context */ |
|
4823 schedule_work(&adapter->watchdog_task); |
|
4824 |
|
4825 /* TODO: make this use queue_delayed_work() */ |
|
4826 } |
|
4827 |
|
4828 static void e1000_watchdog_task(struct work_struct *work) |
|
4829 { |
|
4830 struct e1000_adapter *adapter = container_of(work, |
|
4831 struct e1000_adapter, |
|
4832 watchdog_task); |
|
4833 struct net_device *netdev = adapter->netdev; |
|
4834 struct e1000_mac_info *mac = &adapter->hw.mac; |
|
4835 struct e1000_phy_info *phy = &adapter->hw.phy; |
|
4836 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
4837 struct e1000_hw *hw = &adapter->hw; |
|
4838 u32 link, tctl; |
|
4839 |
|
4840 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
4841 return; |
|
4842 |
|
4843 link = e1000e_has_link(adapter); |
|
4844 if ((netif_carrier_ok(netdev)) && link) { |
|
4845 /* Cancel scheduled suspend requests. */ |
|
4846 pm_runtime_resume(netdev->dev.parent); |
|
4847 |
|
4848 e1000e_enable_receives(adapter); |
|
4849 goto link_up; |
|
4850 } |
|
4851 |
|
4852 if ((e1000e_enable_tx_pkt_filtering(hw)) && |
|
4853 (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) |
|
4854 e1000_update_mng_vlan(adapter); |
|
4855 |
|
4856 if (link) { |
|
4857 if (!netif_carrier_ok(netdev)) { |
|
4858 bool txb2b = true; |
|
4859 |
|
4860 /* Cancel scheduled suspend requests. */ |
|
4861 pm_runtime_resume(netdev->dev.parent); |
|
4862 |
|
4863 /* update snapshot of PHY registers on LSC */ |
|
4864 e1000_phy_read_status(adapter); |
|
4865 mac->ops.get_link_up_info(&adapter->hw, |
|
4866 &adapter->link_speed, |
|
4867 &adapter->link_duplex); |
|
4868 e1000_print_link_info(adapter); |
|
4869 |
|
4870 /* check if SmartSpeed worked */ |
|
4871 e1000e_check_downshift(hw); |
|
4872 if (phy->speed_downgraded) |
|
4873 netdev_warn(netdev, |
|
4874 "Link Speed was downgraded by SmartSpeed\n"); |
|
4875 |
|
4876 /* On supported PHYs, check for duplex mismatch only |
|
4877 * if link has autonegotiated at 10/100 half |
|
4878 */ |
|
4879 if ((hw->phy.type == e1000_phy_igp_3 || |
|
4880 hw->phy.type == e1000_phy_bm) && |
|
4881 hw->mac.autoneg && |
|
4882 (adapter->link_speed == SPEED_10 || |
|
4883 adapter->link_speed == SPEED_100) && |
|
4884 (adapter->link_duplex == HALF_DUPLEX)) { |
|
4885 u16 autoneg_exp; |
|
4886 |
|
4887 e1e_rphy(hw, MII_EXPANSION, &autoneg_exp); |
|
4888 |
|
4889 if (!(autoneg_exp & EXPANSION_NWAY)) |
|
4890 e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n"); |
|
4891 } |
|
4892 |
|
4893 /* adjust timeout factor according to speed/duplex */ |
|
4894 adapter->tx_timeout_factor = 1; |
|
4895 switch (adapter->link_speed) { |
|
4896 case SPEED_10: |
|
4897 txb2b = false; |
|
4898 adapter->tx_timeout_factor = 16; |
|
4899 break; |
|
4900 case SPEED_100: |
|
4901 txb2b = false; |
|
4902 adapter->tx_timeout_factor = 10; |
|
4903 break; |
|
4904 } |
|
4905 |
|
4906 /* workaround: re-program speed mode bit after |
|
4907 * link-up event |
|
4908 */ |
|
4909 if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && |
|
4910 !txb2b) { |
|
4911 u32 tarc0; |
|
4912 tarc0 = er32(TARC(0)); |
|
4913 tarc0 &= ~SPEED_MODE_BIT; |
|
4914 ew32(TARC(0), tarc0); |
|
4915 } |
|
4916 |
|
4917 /* disable TSO for pcie and 10/100 speeds, to avoid |
|
4918 * some hardware issues |
|
4919 */ |
|
4920 if (!(adapter->flags & FLAG_TSO_FORCE)) { |
|
4921 switch (adapter->link_speed) { |
|
4922 case SPEED_10: |
|
4923 case SPEED_100: |
|
4924 e_info("10/100 speed: disabling TSO\n"); |
|
4925 netdev->features &= ~NETIF_F_TSO; |
|
4926 netdev->features &= ~NETIF_F_TSO6; |
|
4927 break; |
|
4928 case SPEED_1000: |
|
4929 netdev->features |= NETIF_F_TSO; |
|
4930 netdev->features |= NETIF_F_TSO6; |
|
4931 break; |
|
4932 default: |
|
4933 /* oops */ |
|
4934 break; |
|
4935 } |
|
4936 } |
|
4937 |
|
4938 /* enable transmits in the hardware, need to do this |
|
4939 * after setting TARC(0) |
|
4940 */ |
|
4941 tctl = er32(TCTL); |
|
4942 tctl |= E1000_TCTL_EN; |
|
4943 ew32(TCTL, tctl); |
|
4944 |
|
4945 /* Perform any post-link-up configuration before |
|
4946 * reporting link up. |
|
4947 */ |
|
4948 if (phy->ops.cfg_on_link_up) |
|
4949 phy->ops.cfg_on_link_up(hw); |
|
4950 |
|
4951 netif_carrier_on(netdev); |
|
4952 |
|
4953 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
4954 mod_timer(&adapter->phy_info_timer, |
|
4955 round_jiffies(jiffies + 2 * HZ)); |
|
4956 } |
|
4957 } else { |
|
4958 if (netif_carrier_ok(netdev)) { |
|
4959 adapter->link_speed = 0; |
|
4960 adapter->link_duplex = 0; |
|
4961 /* Link status message must follow this format */ |
|
4962 pr_info("%s NIC Link is Down\n", adapter->netdev->name); |
|
4963 netif_carrier_off(netdev); |
|
4964 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
4965 mod_timer(&adapter->phy_info_timer, |
|
4966 round_jiffies(jiffies + 2 * HZ)); |
|
4967 |
|
4968 /* The link is lost so the controller stops DMA. |
|
4969 * If there is queued Tx work that cannot be done |
|
4970 * or if on an 8000ES2LAN which requires a Rx packet |
|
4971 * buffer work-around on link down event, reset the |
|
4972 * controller to flush the Tx/Rx packet buffers. |
|
4973 * (Do the reset outside of interrupt context). |
|
4974 */ |
|
4975 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || |
|
4976 (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) |
|
4977 adapter->flags |= FLAG_RESTART_NOW; |
|
4978 else |
|
4979 pm_schedule_suspend(netdev->dev.parent, |
|
4980 LINK_TIMEOUT); |
|
4981 } |
|
4982 } |
|
4983 |
|
4984 link_up: |
|
4985 spin_lock(&adapter->stats64_lock); |
|
4986 e1000e_update_stats(adapter); |
|
4987 |
|
4988 mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old; |
|
4989 adapter->tpt_old = adapter->stats.tpt; |
|
4990 mac->collision_delta = adapter->stats.colc - adapter->colc_old; |
|
4991 adapter->colc_old = adapter->stats.colc; |
|
4992 |
|
4993 adapter->gorc = adapter->stats.gorc - adapter->gorc_old; |
|
4994 adapter->gorc_old = adapter->stats.gorc; |
|
4995 adapter->gotc = adapter->stats.gotc - adapter->gotc_old; |
|
4996 adapter->gotc_old = adapter->stats.gotc; |
|
4997 spin_unlock(&adapter->stats64_lock); |
|
4998 |
|
4999 if (adapter->flags & FLAG_RESTART_NOW) { |
|
5000 schedule_work(&adapter->reset_task); |
|
5001 /* return immediately since reset is imminent */ |
|
5002 return; |
|
5003 } |
|
5004 |
|
5005 e1000e_update_adaptive(&adapter->hw); |
|
5006 |
|
5007 /* Simple mode for Interrupt Throttle Rate (ITR) */ |
|
5008 if (adapter->itr_setting == 4) { |
|
5009 /* Symmetric Tx/Rx gets a reduced ITR=2000; |
|
5010 * Total asymmetrical Tx or Rx gets ITR=8000; |
|
5011 * everyone else is between 2000-8000. |
|
5012 */ |
|
5013 u32 goc = (adapter->gotc + adapter->gorc) / 10000; |
|
5014 u32 dif = (adapter->gotc > adapter->gorc ? |
|
5015 adapter->gotc - adapter->gorc : |
|
5016 adapter->gorc - adapter->gotc) / 10000; |
|
5017 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; |
|
5018 |
|
5019 e1000e_write_itr(adapter, itr); |
|
5020 } |
|
5021 |
|
5022 /* Cause software interrupt to ensure Rx ring is cleaned */ |
|
5023 if (adapter->msix_entries) |
|
5024 ew32(ICS, adapter->rx_ring->ims_val); |
|
5025 else |
|
5026 ew32(ICS, E1000_ICS_RXDMT0); |
|
5027 |
|
5028 /* flush pending descriptors to memory before detecting Tx hang */ |
|
5029 e1000e_flush_descriptors(adapter); |
|
5030 |
|
5031 /* Force detection of hung controller every watchdog period */ |
|
5032 adapter->detect_tx_hung = true; |
|
5033 |
|
5034 /* With 82571 controllers, LAA may be overwritten due to controller |
|
5035 * reset from the other port. Set the appropriate LAA in RAR[0] |
|
5036 */ |
|
5037 if (e1000e_get_laa_state_82571(hw)) |
|
5038 hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0); |
|
5039 |
|
5040 if (adapter->flags2 & FLAG2_CHECK_PHY_HANG) |
|
5041 e1000e_check_82574_phy_workaround(adapter); |
|
5042 |
|
5043 /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */ |
|
5044 if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) { |
|
5045 if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) && |
|
5046 (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) { |
|
5047 er32(RXSTMPH); |
|
5048 adapter->rx_hwtstamp_cleared++; |
|
5049 } else { |
|
5050 adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP; |
|
5051 } |
|
5052 } |
|
5053 |
|
5054 /* Reset the timer */ |
|
5055 if (!test_bit(__E1000_DOWN, &adapter->state)) |
|
5056 mod_timer(&adapter->watchdog_timer, |
|
5057 round_jiffies(jiffies + 2 * HZ)); |
|
5058 } |
|
5059 |
|
5060 #define E1000_TX_FLAGS_CSUM 0x00000001 |
|
5061 #define E1000_TX_FLAGS_VLAN 0x00000002 |
|
5062 #define E1000_TX_FLAGS_TSO 0x00000004 |
|
5063 #define E1000_TX_FLAGS_IPV4 0x00000008 |
|
5064 #define E1000_TX_FLAGS_NO_FCS 0x00000010 |
|
5065 #define E1000_TX_FLAGS_HWTSTAMP 0x00000020 |
|
5066 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 |
|
5067 #define E1000_TX_FLAGS_VLAN_SHIFT 16 |
|
5068 |
|
5069 static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) |
|
5070 { |
|
5071 struct e1000_context_desc *context_desc; |
|
5072 struct e1000_buffer *buffer_info; |
|
5073 unsigned int i; |
|
5074 u32 cmd_length = 0; |
|
5075 u16 ipcse = 0, mss; |
|
5076 u8 ipcss, ipcso, tucss, tucso, hdr_len; |
|
5077 |
|
5078 if (!skb_is_gso(skb)) |
|
5079 return 0; |
|
5080 |
|
5081 if (skb_header_cloned(skb)) { |
|
5082 int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
|
5083 |
|
5084 if (err) |
|
5085 return err; |
|
5086 } |
|
5087 |
|
5088 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
|
5089 mss = skb_shinfo(skb)->gso_size; |
|
5090 if (skb->protocol == htons(ETH_P_IP)) { |
|
5091 struct iphdr *iph = ip_hdr(skb); |
|
5092 iph->tot_len = 0; |
|
5093 iph->check = 0; |
|
5094 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, |
|
5095 0, IPPROTO_TCP, 0); |
|
5096 cmd_length = E1000_TXD_CMD_IP; |
|
5097 ipcse = skb_transport_offset(skb) - 1; |
|
5098 } else if (skb_is_gso_v6(skb)) { |
|
5099 ipv6_hdr(skb)->payload_len = 0; |
|
5100 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, |
|
5101 &ipv6_hdr(skb)->daddr, |
|
5102 0, IPPROTO_TCP, 0); |
|
5103 ipcse = 0; |
|
5104 } |
|
5105 ipcss = skb_network_offset(skb); |
|
5106 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; |
|
5107 tucss = skb_transport_offset(skb); |
|
5108 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; |
|
5109 |
|
5110 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | |
|
5111 E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); |
|
5112 |
|
5113 i = tx_ring->next_to_use; |
|
5114 context_desc = E1000_CONTEXT_DESC(*tx_ring, i); |
|
5115 buffer_info = &tx_ring->buffer_info[i]; |
|
5116 |
|
5117 context_desc->lower_setup.ip_fields.ipcss = ipcss; |
|
5118 context_desc->lower_setup.ip_fields.ipcso = ipcso; |
|
5119 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); |
|
5120 context_desc->upper_setup.tcp_fields.tucss = tucss; |
|
5121 context_desc->upper_setup.tcp_fields.tucso = tucso; |
|
5122 context_desc->upper_setup.tcp_fields.tucse = 0; |
|
5123 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); |
|
5124 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; |
|
5125 context_desc->cmd_and_length = cpu_to_le32(cmd_length); |
|
5126 |
|
5127 buffer_info->time_stamp = jiffies; |
|
5128 buffer_info->next_to_watch = i; |
|
5129 |
|
5130 i++; |
|
5131 if (i == tx_ring->count) |
|
5132 i = 0; |
|
5133 tx_ring->next_to_use = i; |
|
5134 |
|
5135 return 1; |
|
5136 } |
|
5137 |
|
5138 static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) |
|
5139 { |
|
5140 struct e1000_adapter *adapter = tx_ring->adapter; |
|
5141 struct e1000_context_desc *context_desc; |
|
5142 struct e1000_buffer *buffer_info; |
|
5143 unsigned int i; |
|
5144 u8 css; |
|
5145 u32 cmd_len = E1000_TXD_CMD_DEXT; |
|
5146 __be16 protocol; |
|
5147 |
|
5148 if (skb->ip_summed != CHECKSUM_PARTIAL) |
|
5149 return 0; |
|
5150 |
|
5151 if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) |
|
5152 protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; |
|
5153 else |
|
5154 protocol = skb->protocol; |
|
5155 |
|
5156 switch (protocol) { |
|
5157 case cpu_to_be16(ETH_P_IP): |
|
5158 if (ip_hdr(skb)->protocol == IPPROTO_TCP) |
|
5159 cmd_len |= E1000_TXD_CMD_TCP; |
|
5160 break; |
|
5161 case cpu_to_be16(ETH_P_IPV6): |
|
5162 /* XXX not handling all IPV6 headers */ |
|
5163 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) |
|
5164 cmd_len |= E1000_TXD_CMD_TCP; |
|
5165 break; |
|
5166 default: |
|
5167 if (unlikely(net_ratelimit())) |
|
5168 e_warn("checksum_partial proto=%x!\n", |
|
5169 be16_to_cpu(protocol)); |
|
5170 break; |
|
5171 } |
|
5172 |
|
5173 css = skb_checksum_start_offset(skb); |
|
5174 |
|
5175 i = tx_ring->next_to_use; |
|
5176 buffer_info = &tx_ring->buffer_info[i]; |
|
5177 context_desc = E1000_CONTEXT_DESC(*tx_ring, i); |
|
5178 |
|
5179 context_desc->lower_setup.ip_config = 0; |
|
5180 context_desc->upper_setup.tcp_fields.tucss = css; |
|
5181 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; |
|
5182 context_desc->upper_setup.tcp_fields.tucse = 0; |
|
5183 context_desc->tcp_seg_setup.data = 0; |
|
5184 context_desc->cmd_and_length = cpu_to_le32(cmd_len); |
|
5185 |
|
5186 buffer_info->time_stamp = jiffies; |
|
5187 buffer_info->next_to_watch = i; |
|
5188 |
|
5189 i++; |
|
5190 if (i == tx_ring->count) |
|
5191 i = 0; |
|
5192 tx_ring->next_to_use = i; |
|
5193 |
|
5194 return 1; |
|
5195 } |
|
5196 |
|
5197 static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, |
|
5198 unsigned int first, unsigned int max_per_txd, |
|
5199 unsigned int nr_frags) |
|
5200 { |
|
5201 struct e1000_adapter *adapter = tx_ring->adapter; |
|
5202 struct pci_dev *pdev = adapter->pdev; |
|
5203 struct e1000_buffer *buffer_info; |
|
5204 unsigned int len = skb_headlen(skb); |
|
5205 unsigned int offset = 0, size, count = 0, i; |
|
5206 unsigned int f, bytecount, segs; |
|
5207 |
|
5208 i = tx_ring->next_to_use; |
|
5209 |
|
5210 while (len) { |
|
5211 buffer_info = &tx_ring->buffer_info[i]; |
|
5212 size = min(len, max_per_txd); |
|
5213 |
|
5214 buffer_info->length = size; |
|
5215 buffer_info->time_stamp = jiffies; |
|
5216 buffer_info->next_to_watch = i; |
|
5217 buffer_info->dma = dma_map_single(&pdev->dev, |
|
5218 skb->data + offset, |
|
5219 size, DMA_TO_DEVICE); |
|
5220 buffer_info->mapped_as_page = false; |
|
5221 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) |
|
5222 goto dma_error; |
|
5223 |
|
5224 len -= size; |
|
5225 offset += size; |
|
5226 count++; |
|
5227 |
|
5228 if (len) { |
|
5229 i++; |
|
5230 if (i == tx_ring->count) |
|
5231 i = 0; |
|
5232 } |
|
5233 } |
|
5234 |
|
5235 for (f = 0; f < nr_frags; f++) { |
|
5236 const struct skb_frag_struct *frag; |
|
5237 |
|
5238 frag = &skb_shinfo(skb)->frags[f]; |
|
5239 len = skb_frag_size(frag); |
|
5240 offset = 0; |
|
5241 |
|
5242 while (len) { |
|
5243 i++; |
|
5244 if (i == tx_ring->count) |
|
5245 i = 0; |
|
5246 |
|
5247 buffer_info = &tx_ring->buffer_info[i]; |
|
5248 size = min(len, max_per_txd); |
|
5249 |
|
5250 buffer_info->length = size; |
|
5251 buffer_info->time_stamp = jiffies; |
|
5252 buffer_info->next_to_watch = i; |
|
5253 buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, |
|
5254 offset, size, |
|
5255 DMA_TO_DEVICE); |
|
5256 buffer_info->mapped_as_page = true; |
|
5257 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) |
|
5258 goto dma_error; |
|
5259 |
|
5260 len -= size; |
|
5261 offset += size; |
|
5262 count++; |
|
5263 } |
|
5264 } |
|
5265 |
|
5266 segs = skb_shinfo(skb)->gso_segs ? : 1; |
|
5267 /* multiply data chunks by size of headers */ |
|
5268 bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len; |
|
5269 |
|
5270 tx_ring->buffer_info[i].skb = skb; |
|
5271 tx_ring->buffer_info[i].segs = segs; |
|
5272 tx_ring->buffer_info[i].bytecount = bytecount; |
|
5273 tx_ring->buffer_info[first].next_to_watch = i; |
|
5274 |
|
5275 return count; |
|
5276 |
|
5277 dma_error: |
|
5278 dev_err(&pdev->dev, "Tx DMA map failed\n"); |
|
5279 buffer_info->dma = 0; |
|
5280 if (count) |
|
5281 count--; |
|
5282 |
|
5283 while (count--) { |
|
5284 if (i == 0) |
|
5285 i += tx_ring->count; |
|
5286 i--; |
|
5287 buffer_info = &tx_ring->buffer_info[i]; |
|
5288 e1000_put_txbuf(tx_ring, buffer_info); |
|
5289 } |
|
5290 |
|
5291 return 0; |
|
5292 } |
|
5293 |
|
5294 static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) |
|
5295 { |
|
5296 struct e1000_adapter *adapter = tx_ring->adapter; |
|
5297 struct e1000_tx_desc *tx_desc = NULL; |
|
5298 struct e1000_buffer *buffer_info; |
|
5299 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; |
|
5300 unsigned int i; |
|
5301 |
|
5302 if (tx_flags & E1000_TX_FLAGS_TSO) { |
|
5303 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | |
|
5304 E1000_TXD_CMD_TSE; |
|
5305 txd_upper |= E1000_TXD_POPTS_TXSM << 8; |
|
5306 |
|
5307 if (tx_flags & E1000_TX_FLAGS_IPV4) |
|
5308 txd_upper |= E1000_TXD_POPTS_IXSM << 8; |
|
5309 } |
|
5310 |
|
5311 if (tx_flags & E1000_TX_FLAGS_CSUM) { |
|
5312 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; |
|
5313 txd_upper |= E1000_TXD_POPTS_TXSM << 8; |
|
5314 } |
|
5315 |
|
5316 if (tx_flags & E1000_TX_FLAGS_VLAN) { |
|
5317 txd_lower |= E1000_TXD_CMD_VLE; |
|
5318 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); |
|
5319 } |
|
5320 |
|
5321 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) |
|
5322 txd_lower &= ~(E1000_TXD_CMD_IFCS); |
|
5323 |
|
5324 if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) { |
|
5325 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; |
|
5326 txd_upper |= E1000_TXD_EXTCMD_TSTAMP; |
|
5327 } |
|
5328 |
|
5329 i = tx_ring->next_to_use; |
|
5330 |
|
5331 do { |
|
5332 buffer_info = &tx_ring->buffer_info[i]; |
|
5333 tx_desc = E1000_TX_DESC(*tx_ring, i); |
|
5334 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); |
|
5335 tx_desc->lower.data = cpu_to_le32(txd_lower | |
|
5336 buffer_info->length); |
|
5337 tx_desc->upper.data = cpu_to_le32(txd_upper); |
|
5338 |
|
5339 i++; |
|
5340 if (i == tx_ring->count) |
|
5341 i = 0; |
|
5342 } while (--count > 0); |
|
5343 |
|
5344 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); |
|
5345 |
|
5346 /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */ |
|
5347 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) |
|
5348 tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS)); |
|
5349 |
|
5350 /* Force memory writes to complete before letting h/w |
|
5351 * know there are new descriptors to fetch. (Only |
|
5352 * applicable for weak-ordered memory model archs, |
|
5353 * such as IA-64). |
|
5354 */ |
|
5355 wmb(); |
|
5356 |
|
5357 tx_ring->next_to_use = i; |
|
5358 |
|
5359 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) |
|
5360 e1000e_update_tdt_wa(tx_ring, i); |
|
5361 else |
|
5362 writel(i, tx_ring->tail); |
|
5363 |
|
5364 /* we need this if more than one processor can write to our tail |
|
5365 * at a time, it synchronizes IO on IA64/Altix systems |
|
5366 */ |
|
5367 mmiowb(); |
|
5368 } |
|
5369 |
|
5370 #define MINIMUM_DHCP_PACKET_SIZE 282 |
|
5371 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, |
|
5372 struct sk_buff *skb) |
|
5373 { |
|
5374 struct e1000_hw *hw = &adapter->hw; |
|
5375 u16 length, offset; |
|
5376 |
|
5377 if (vlan_tx_tag_present(skb) && |
|
5378 !((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && |
|
5379 (adapter->hw.mng_cookie.status & |
|
5380 E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) |
|
5381 return 0; |
|
5382 |
|
5383 if (skb->len <= MINIMUM_DHCP_PACKET_SIZE) |
|
5384 return 0; |
|
5385 |
|
5386 if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP)) |
|
5387 return 0; |
|
5388 |
|
5389 { |
|
5390 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14); |
|
5391 struct udphdr *udp; |
|
5392 |
|
5393 if (ip->protocol != IPPROTO_UDP) |
|
5394 return 0; |
|
5395 |
|
5396 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2)); |
|
5397 if (ntohs(udp->dest) != 67) |
|
5398 return 0; |
|
5399 |
|
5400 offset = (u8 *)udp + 8 - skb->data; |
|
5401 length = skb->len - offset; |
|
5402 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length); |
|
5403 } |
|
5404 |
|
5405 return 0; |
|
5406 } |
|
5407 |
|
5408 static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) |
|
5409 { |
|
5410 struct e1000_adapter *adapter = tx_ring->adapter; |
|
5411 |
|
5412 netif_stop_queue(adapter->netdev); |
|
5413 /* Herbert's original patch had: |
|
5414 * smp_mb__after_netif_stop_queue(); |
|
5415 * but since that doesn't exist yet, just open code it. |
|
5416 */ |
|
5417 smp_mb(); |
|
5418 |
|
5419 /* We need to check again in a case another CPU has just |
|
5420 * made room available. |
|
5421 */ |
|
5422 if (e1000_desc_unused(tx_ring) < size) |
|
5423 return -EBUSY; |
|
5424 |
|
5425 /* A reprieve! */ |
|
5426 netif_start_queue(adapter->netdev); |
|
5427 ++adapter->restart_queue; |
|
5428 return 0; |
|
5429 } |
|
5430 |
|
5431 static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) |
|
5432 { |
|
5433 BUG_ON(size > tx_ring->count); |
|
5434 |
|
5435 if (e1000_desc_unused(tx_ring) >= size) |
|
5436 return 0; |
|
5437 return __e1000_maybe_stop_tx(tx_ring, size); |
|
5438 } |
|
5439 |
|
5440 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, |
|
5441 struct net_device *netdev) |
|
5442 { |
|
5443 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5444 struct e1000_ring *tx_ring = adapter->tx_ring; |
|
5445 unsigned int first; |
|
5446 unsigned int tx_flags = 0; |
|
5447 unsigned int len = skb_headlen(skb); |
|
5448 unsigned int nr_frags; |
|
5449 unsigned int mss; |
|
5450 int count = 0; |
|
5451 int tso; |
|
5452 unsigned int f; |
|
5453 |
|
5454 if (test_bit(__E1000_DOWN, &adapter->state)) { |
|
5455 dev_kfree_skb_any(skb); |
|
5456 return NETDEV_TX_OK; |
|
5457 } |
|
5458 |
|
5459 if (skb->len <= 0) { |
|
5460 dev_kfree_skb_any(skb); |
|
5461 return NETDEV_TX_OK; |
|
5462 } |
|
5463 |
|
5464 /* The minimum packet size with TCTL.PSP set is 17 bytes so |
|
5465 * pad skb in order to meet this minimum size requirement |
|
5466 */ |
|
5467 if (unlikely(skb->len < 17)) { |
|
5468 if (skb_pad(skb, 17 - skb->len)) |
|
5469 return NETDEV_TX_OK; |
|
5470 skb->len = 17; |
|
5471 skb_set_tail_pointer(skb, 17); |
|
5472 } |
|
5473 |
|
5474 mss = skb_shinfo(skb)->gso_size; |
|
5475 if (mss) { |
|
5476 u8 hdr_len; |
|
5477 |
|
5478 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data |
|
5479 * points to just header, pull a few bytes of payload from |
|
5480 * frags into skb->data |
|
5481 */ |
|
5482 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); |
|
5483 /* we do this workaround for ES2LAN, but it is un-necessary, |
|
5484 * avoiding it could save a lot of cycles |
|
5485 */ |
|
5486 if (skb->data_len && (hdr_len == len)) { |
|
5487 unsigned int pull_size; |
|
5488 |
|
5489 pull_size = min_t(unsigned int, 4, skb->data_len); |
|
5490 if (!__pskb_pull_tail(skb, pull_size)) { |
|
5491 e_err("__pskb_pull_tail failed.\n"); |
|
5492 dev_kfree_skb_any(skb); |
|
5493 return NETDEV_TX_OK; |
|
5494 } |
|
5495 len = skb_headlen(skb); |
|
5496 } |
|
5497 } |
|
5498 |
|
5499 /* reserve a descriptor for the offload context */ |
|
5500 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) |
|
5501 count++; |
|
5502 count++; |
|
5503 |
|
5504 count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); |
|
5505 |
|
5506 nr_frags = skb_shinfo(skb)->nr_frags; |
|
5507 for (f = 0; f < nr_frags; f++) |
|
5508 count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), |
|
5509 adapter->tx_fifo_limit); |
|
5510 |
|
5511 if (adapter->hw.mac.tx_pkt_filtering) |
|
5512 e1000_transfer_dhcp_info(adapter, skb); |
|
5513 |
|
5514 /* need: count + 2 desc gap to keep tail from touching |
|
5515 * head, otherwise try next time |
|
5516 */ |
|
5517 if (e1000_maybe_stop_tx(tx_ring, count + 2)) |
|
5518 return NETDEV_TX_BUSY; |
|
5519 |
|
5520 if (vlan_tx_tag_present(skb)) { |
|
5521 tx_flags |= E1000_TX_FLAGS_VLAN; |
|
5522 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); |
|
5523 } |
|
5524 |
|
5525 first = tx_ring->next_to_use; |
|
5526 |
|
5527 tso = e1000_tso(tx_ring, skb); |
|
5528 if (tso < 0) { |
|
5529 dev_kfree_skb_any(skb); |
|
5530 return NETDEV_TX_OK; |
|
5531 } |
|
5532 |
|
5533 if (tso) |
|
5534 tx_flags |= E1000_TX_FLAGS_TSO; |
|
5535 else if (e1000_tx_csum(tx_ring, skb)) |
|
5536 tx_flags |= E1000_TX_FLAGS_CSUM; |
|
5537 |
|
5538 /* Old method was to assume IPv4 packet by default if TSO was enabled. |
|
5539 * 82571 hardware supports TSO capabilities for IPv6 as well... |
|
5540 * no longer assume, we must. |
|
5541 */ |
|
5542 if (skb->protocol == htons(ETH_P_IP)) |
|
5543 tx_flags |= E1000_TX_FLAGS_IPV4; |
|
5544 |
|
5545 if (unlikely(skb->no_fcs)) |
|
5546 tx_flags |= E1000_TX_FLAGS_NO_FCS; |
|
5547 |
|
5548 /* if count is 0 then mapping error has occurred */ |
|
5549 count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, |
|
5550 nr_frags); |
|
5551 if (count) { |
|
5552 if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && |
|
5553 !adapter->tx_hwtstamp_skb)) { |
|
5554 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
|
5555 tx_flags |= E1000_TX_FLAGS_HWTSTAMP; |
|
5556 adapter->tx_hwtstamp_skb = skb_get(skb); |
|
5557 schedule_work(&adapter->tx_hwtstamp_work); |
|
5558 } else { |
|
5559 skb_tx_timestamp(skb); |
|
5560 } |
|
5561 |
|
5562 netdev_sent_queue(netdev, skb->len); |
|
5563 e1000_tx_queue(tx_ring, tx_flags, count); |
|
5564 /* Make sure there is space in the ring for the next send. */ |
|
5565 e1000_maybe_stop_tx(tx_ring, |
|
5566 (MAX_SKB_FRAGS * |
|
5567 DIV_ROUND_UP(PAGE_SIZE, |
|
5568 adapter->tx_fifo_limit) + 2)); |
|
5569 } else { |
|
5570 dev_kfree_skb_any(skb); |
|
5571 tx_ring->buffer_info[first].time_stamp = 0; |
|
5572 tx_ring->next_to_use = first; |
|
5573 } |
|
5574 |
|
5575 return NETDEV_TX_OK; |
|
5576 } |
|
5577 |
|
5578 /** |
|
5579 * e1000_tx_timeout - Respond to a Tx Hang |
|
5580 * @netdev: network interface device structure |
|
5581 **/ |
|
5582 static void e1000_tx_timeout(struct net_device *netdev) |
|
5583 { |
|
5584 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5585 |
|
5586 /* Do the reset outside of interrupt context */ |
|
5587 adapter->tx_timeout_count++; |
|
5588 schedule_work(&adapter->reset_task); |
|
5589 } |
|
5590 |
|
5591 static void e1000_reset_task(struct work_struct *work) |
|
5592 { |
|
5593 struct e1000_adapter *adapter; |
|
5594 adapter = container_of(work, struct e1000_adapter, reset_task); |
|
5595 |
|
5596 /* don't run the task if already down */ |
|
5597 if (test_bit(__E1000_DOWN, &adapter->state)) |
|
5598 return; |
|
5599 |
|
5600 if (!(adapter->flags & FLAG_RESTART_NOW)) { |
|
5601 e1000e_dump(adapter); |
|
5602 e_err("Reset adapter unexpectedly\n"); |
|
5603 } |
|
5604 e1000e_reinit_locked(adapter); |
|
5605 } |
|
5606 |
|
5607 /** |
|
5608 * e1000_get_stats64 - Get System Network Statistics |
|
5609 * @netdev: network interface device structure |
|
5610 * @stats: rtnl_link_stats64 pointer |
|
5611 * |
|
5612 * Returns the address of the device statistics structure. |
|
5613 **/ |
|
5614 struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, |
|
5615 struct rtnl_link_stats64 *stats) |
|
5616 { |
|
5617 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5618 |
|
5619 memset(stats, 0, sizeof(struct rtnl_link_stats64)); |
|
5620 spin_lock(&adapter->stats64_lock); |
|
5621 e1000e_update_stats(adapter); |
|
5622 /* Fill out the OS statistics structure */ |
|
5623 stats->rx_bytes = adapter->stats.gorc; |
|
5624 stats->rx_packets = adapter->stats.gprc; |
|
5625 stats->tx_bytes = adapter->stats.gotc; |
|
5626 stats->tx_packets = adapter->stats.gptc; |
|
5627 stats->multicast = adapter->stats.mprc; |
|
5628 stats->collisions = adapter->stats.colc; |
|
5629 |
|
5630 /* Rx Errors */ |
|
5631 |
|
5632 /* RLEC on some newer hardware can be incorrect so build |
|
5633 * our own version based on RUC and ROC |
|
5634 */ |
|
5635 stats->rx_errors = adapter->stats.rxerrc + |
|
5636 adapter->stats.crcerrs + adapter->stats.algnerrc + |
|
5637 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; |
|
5638 stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc; |
|
5639 stats->rx_crc_errors = adapter->stats.crcerrs; |
|
5640 stats->rx_frame_errors = adapter->stats.algnerrc; |
|
5641 stats->rx_missed_errors = adapter->stats.mpc; |
|
5642 |
|
5643 /* Tx Errors */ |
|
5644 stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol; |
|
5645 stats->tx_aborted_errors = adapter->stats.ecol; |
|
5646 stats->tx_window_errors = adapter->stats.latecol; |
|
5647 stats->tx_carrier_errors = adapter->stats.tncrs; |
|
5648 |
|
5649 /* Tx Dropped needs to be maintained elsewhere */ |
|
5650 |
|
5651 spin_unlock(&adapter->stats64_lock); |
|
5652 return stats; |
|
5653 } |
|
5654 |
|
5655 /** |
|
5656 * e1000_change_mtu - Change the Maximum Transfer Unit |
|
5657 * @netdev: network interface device structure |
|
5658 * @new_mtu: new value for maximum frame size |
|
5659 * |
|
5660 * Returns 0 on success, negative on failure |
|
5661 **/ |
|
5662 static int e1000_change_mtu(struct net_device *netdev, int new_mtu) |
|
5663 { |
|
5664 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5665 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; |
|
5666 |
|
5667 /* Jumbo frame support */ |
|
5668 if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && |
|
5669 !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { |
|
5670 e_err("Jumbo Frames not supported.\n"); |
|
5671 return -EINVAL; |
|
5672 } |
|
5673 |
|
5674 /* Supported frame sizes */ |
|
5675 if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || |
|
5676 (max_frame > adapter->max_hw_frame_size)) { |
|
5677 e_err("Unsupported MTU setting\n"); |
|
5678 return -EINVAL; |
|
5679 } |
|
5680 |
|
5681 /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ |
|
5682 if ((adapter->hw.mac.type >= e1000_pch2lan) && |
|
5683 !(adapter->flags2 & FLAG2_CRC_STRIPPING) && |
|
5684 (new_mtu > ETH_DATA_LEN)) { |
|
5685 e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n"); |
|
5686 return -EINVAL; |
|
5687 } |
|
5688 |
|
5689 while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) |
|
5690 usleep_range(1000, 2000); |
|
5691 /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ |
|
5692 adapter->max_frame_size = max_frame; |
|
5693 e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); |
|
5694 netdev->mtu = new_mtu; |
|
5695 if (netif_running(netdev)) |
|
5696 e1000e_down(adapter); |
|
5697 |
|
5698 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN |
|
5699 * means we reserve 2 more, this pushes us to allocate from the next |
|
5700 * larger slab size. |
|
5701 * i.e. RXBUFFER_2048 --> size-4096 slab |
|
5702 * However with the new *_jumbo_rx* routines, jumbo receives will use |
|
5703 * fragmented skbs |
|
5704 */ |
|
5705 |
|
5706 if (max_frame <= 2048) |
|
5707 adapter->rx_buffer_len = 2048; |
|
5708 else |
|
5709 adapter->rx_buffer_len = 4096; |
|
5710 |
|
5711 /* adjust allocation if LPE protects us, and we aren't using SBP */ |
|
5712 if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || |
|
5713 (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) |
|
5714 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN |
|
5715 + ETH_FCS_LEN; |
|
5716 |
|
5717 if (netif_running(netdev)) |
|
5718 e1000e_up(adapter); |
|
5719 else |
|
5720 e1000e_reset(adapter); |
|
5721 |
|
5722 clear_bit(__E1000_RESETTING, &adapter->state); |
|
5723 |
|
5724 return 0; |
|
5725 } |
|
5726 |
|
5727 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, |
|
5728 int cmd) |
|
5729 { |
|
5730 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5731 struct mii_ioctl_data *data = if_mii(ifr); |
|
5732 |
|
5733 if (adapter->hw.phy.media_type != e1000_media_type_copper) |
|
5734 return -EOPNOTSUPP; |
|
5735 |
|
5736 switch (cmd) { |
|
5737 case SIOCGMIIPHY: |
|
5738 data->phy_id = adapter->hw.phy.addr; |
|
5739 break; |
|
5740 case SIOCGMIIREG: |
|
5741 e1000_phy_read_status(adapter); |
|
5742 |
|
5743 switch (data->reg_num & 0x1F) { |
|
5744 case MII_BMCR: |
|
5745 data->val_out = adapter->phy_regs.bmcr; |
|
5746 break; |
|
5747 case MII_BMSR: |
|
5748 data->val_out = adapter->phy_regs.bmsr; |
|
5749 break; |
|
5750 case MII_PHYSID1: |
|
5751 data->val_out = (adapter->hw.phy.id >> 16); |
|
5752 break; |
|
5753 case MII_PHYSID2: |
|
5754 data->val_out = (adapter->hw.phy.id & 0xFFFF); |
|
5755 break; |
|
5756 case MII_ADVERTISE: |
|
5757 data->val_out = adapter->phy_regs.advertise; |
|
5758 break; |
|
5759 case MII_LPA: |
|
5760 data->val_out = adapter->phy_regs.lpa; |
|
5761 break; |
|
5762 case MII_EXPANSION: |
|
5763 data->val_out = adapter->phy_regs.expansion; |
|
5764 break; |
|
5765 case MII_CTRL1000: |
|
5766 data->val_out = adapter->phy_regs.ctrl1000; |
|
5767 break; |
|
5768 case MII_STAT1000: |
|
5769 data->val_out = adapter->phy_regs.stat1000; |
|
5770 break; |
|
5771 case MII_ESTATUS: |
|
5772 data->val_out = adapter->phy_regs.estatus; |
|
5773 break; |
|
5774 default: |
|
5775 return -EIO; |
|
5776 } |
|
5777 break; |
|
5778 case SIOCSMIIREG: |
|
5779 default: |
|
5780 return -EOPNOTSUPP; |
|
5781 } |
|
5782 return 0; |
|
5783 } |
|
5784 |
|
5785 /** |
|
5786 * e1000e_hwtstamp_ioctl - control hardware time stamping |
|
5787 * @netdev: network interface device structure |
|
5788 * @ifreq: interface request |
|
5789 * |
|
5790 * Outgoing time stamping can be enabled and disabled. Play nice and |
|
5791 * disable it when requested, although it shouldn't cause any overhead |
|
5792 * when no packet needs it. At most one packet in the queue may be |
|
5793 * marked for time stamping, otherwise it would be impossible to tell |
|
5794 * for sure to which packet the hardware time stamp belongs. |
|
5795 * |
|
5796 * Incoming time stamping has to be configured via the hardware filters. |
|
5797 * Not all combinations are supported, in particular event type has to be |
|
5798 * specified. Matching the kind of event packet is not supported, with the |
|
5799 * exception of "all V2 events regardless of level 2 or 4". |
|
5800 **/ |
|
5801 static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr) |
|
5802 { |
|
5803 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5804 struct hwtstamp_config config; |
|
5805 int ret_val; |
|
5806 |
|
5807 if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) |
|
5808 return -EFAULT; |
|
5809 |
|
5810 adapter->hwtstamp_config = config; |
|
5811 |
|
5812 ret_val = e1000e_config_hwtstamp(adapter); |
|
5813 if (ret_val) |
|
5814 return ret_val; |
|
5815 |
|
5816 config = adapter->hwtstamp_config; |
|
5817 |
|
5818 switch (config.rx_filter) { |
|
5819 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: |
|
5820 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: |
|
5821 case HWTSTAMP_FILTER_PTP_V2_SYNC: |
|
5822 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: |
|
5823 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: |
|
5824 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: |
|
5825 /* With V2 type filters which specify a Sync or Delay Request, |
|
5826 * Path Delay Request/Response messages are also time stamped |
|
5827 * by hardware so notify the caller the requested packets plus |
|
5828 * some others are time stamped. |
|
5829 */ |
|
5830 config.rx_filter = HWTSTAMP_FILTER_SOME; |
|
5831 break; |
|
5832 default: |
|
5833 break; |
|
5834 } |
|
5835 |
|
5836 return copy_to_user(ifr->ifr_data, &config, |
|
5837 sizeof(config)) ? -EFAULT : 0; |
|
5838 } |
|
5839 |
|
5840 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
|
5841 { |
|
5842 switch (cmd) { |
|
5843 case SIOCGMIIPHY: |
|
5844 case SIOCGMIIREG: |
|
5845 case SIOCSMIIREG: |
|
5846 return e1000_mii_ioctl(netdev, ifr, cmd); |
|
5847 case SIOCSHWTSTAMP: |
|
5848 return e1000e_hwtstamp_ioctl(netdev, ifr); |
|
5849 default: |
|
5850 return -EOPNOTSUPP; |
|
5851 } |
|
5852 } |
|
5853 |
|
5854 static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) |
|
5855 { |
|
5856 struct e1000_hw *hw = &adapter->hw; |
|
5857 u32 i, mac_reg; |
|
5858 u16 phy_reg, wuc_enable; |
|
5859 int retval; |
|
5860 |
|
5861 /* copy MAC RARs to PHY RARs */ |
|
5862 e1000_copy_rx_addrs_to_phy_ich8lan(hw); |
|
5863 |
|
5864 retval = hw->phy.ops.acquire(hw); |
|
5865 if (retval) { |
|
5866 e_err("Could not acquire PHY\n"); |
|
5867 return retval; |
|
5868 } |
|
5869 |
|
5870 /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */ |
|
5871 retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable); |
|
5872 if (retval) |
|
5873 goto release; |
|
5874 |
|
5875 /* copy MAC MTA to PHY MTA - only needed for pchlan */ |
|
5876 for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) { |
|
5877 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i); |
|
5878 hw->phy.ops.write_reg_page(hw, BM_MTA(i), |
|
5879 (u16)(mac_reg & 0xFFFF)); |
|
5880 hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1, |
|
5881 (u16)((mac_reg >> 16) & 0xFFFF)); |
|
5882 } |
|
5883 |
|
5884 /* configure PHY Rx Control register */ |
|
5885 hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg); |
|
5886 mac_reg = er32(RCTL); |
|
5887 if (mac_reg & E1000_RCTL_UPE) |
|
5888 phy_reg |= BM_RCTL_UPE; |
|
5889 if (mac_reg & E1000_RCTL_MPE) |
|
5890 phy_reg |= BM_RCTL_MPE; |
|
5891 phy_reg &= ~(BM_RCTL_MO_MASK); |
|
5892 if (mac_reg & E1000_RCTL_MO_3) |
|
5893 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT) |
|
5894 << BM_RCTL_MO_SHIFT); |
|
5895 if (mac_reg & E1000_RCTL_BAM) |
|
5896 phy_reg |= BM_RCTL_BAM; |
|
5897 if (mac_reg & E1000_RCTL_PMCF) |
|
5898 phy_reg |= BM_RCTL_PMCF; |
|
5899 mac_reg = er32(CTRL); |
|
5900 if (mac_reg & E1000_CTRL_RFCE) |
|
5901 phy_reg |= BM_RCTL_RFCE; |
|
5902 hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg); |
|
5903 |
|
5904 /* enable PHY wakeup in MAC register */ |
|
5905 ew32(WUFC, wufc); |
|
5906 ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN); |
|
5907 |
|
5908 /* configure and enable PHY wakeup in PHY registers */ |
|
5909 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc); |
|
5910 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); |
|
5911 |
|
5912 /* activate PHY wakeup */ |
|
5913 wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT; |
|
5914 retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable); |
|
5915 if (retval) |
|
5916 e_err("Could not set PHY Host Wakeup bit\n"); |
|
5917 release: |
|
5918 hw->phy.ops.release(hw); |
|
5919 |
|
5920 return retval; |
|
5921 } |
|
5922 |
|
5923 static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) |
|
5924 { |
|
5925 struct net_device *netdev = pci_get_drvdata(pdev); |
|
5926 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
5927 struct e1000_hw *hw = &adapter->hw; |
|
5928 u32 ctrl, ctrl_ext, rctl, status; |
|
5929 /* Runtime suspend should only enable wakeup for link changes */ |
|
5930 u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; |
|
5931 int retval = 0; |
|
5932 |
|
5933 netif_device_detach(netdev); |
|
5934 |
|
5935 if (netif_running(netdev)) { |
|
5936 int count = E1000_CHECK_RESET_COUNT; |
|
5937 |
|
5938 while (test_bit(__E1000_RESETTING, &adapter->state) && count--) |
|
5939 usleep_range(10000, 20000); |
|
5940 |
|
5941 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); |
|
5942 e1000e_down(adapter); |
|
5943 e1000_free_irq(adapter); |
|
5944 } |
|
5945 e1000e_reset_interrupt_capability(adapter); |
|
5946 |
|
5947 status = er32(STATUS); |
|
5948 if (status & E1000_STATUS_LU) |
|
5949 wufc &= ~E1000_WUFC_LNKC; |
|
5950 |
|
5951 if (wufc) { |
|
5952 e1000_setup_rctl(adapter); |
|
5953 e1000e_set_rx_mode(netdev); |
|
5954 |
|
5955 /* turn on all-multi mode if wake on multicast is enabled */ |
|
5956 if (wufc & E1000_WUFC_MC) { |
|
5957 rctl = er32(RCTL); |
|
5958 rctl |= E1000_RCTL_MPE; |
|
5959 ew32(RCTL, rctl); |
|
5960 } |
|
5961 |
|
5962 ctrl = er32(CTRL); |
|
5963 ctrl |= E1000_CTRL_ADVD3WUC; |
|
5964 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)) |
|
5965 ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT; |
|
5966 ew32(CTRL, ctrl); |
|
5967 |
|
5968 if (adapter->hw.phy.media_type == e1000_media_type_fiber || |
|
5969 adapter->hw.phy.media_type == |
|
5970 e1000_media_type_internal_serdes) { |
|
5971 /* keep the laser running in D3 */ |
|
5972 ctrl_ext = er32(CTRL_EXT); |
|
5973 ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA; |
|
5974 ew32(CTRL_EXT, ctrl_ext); |
|
5975 } |
|
5976 |
|
5977 if (adapter->flags & FLAG_IS_ICH) |
|
5978 e1000_suspend_workarounds_ich8lan(&adapter->hw); |
|
5979 |
|
5980 /* Allow time for pending master requests to run */ |
|
5981 e1000e_disable_pcie_master(&adapter->hw); |
|
5982 |
|
5983 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { |
|
5984 /* enable wakeup by the PHY */ |
|
5985 retval = e1000_init_phy_wakeup(adapter, wufc); |
|
5986 if (retval) |
|
5987 return retval; |
|
5988 } else { |
|
5989 /* enable wakeup by the MAC */ |
|
5990 ew32(WUFC, wufc); |
|
5991 ew32(WUC, E1000_WUC_PME_EN); |
|
5992 } |
|
5993 } else { |
|
5994 ew32(WUC, 0); |
|
5995 ew32(WUFC, 0); |
|
5996 } |
|
5997 |
|
5998 if (adapter->hw.phy.type == e1000_phy_igp_3) |
|
5999 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); |
|
6000 |
|
6001 /* Release control of h/w to f/w. If f/w is AMT enabled, this |
|
6002 * would have already happened in close and is redundant. |
|
6003 */ |
|
6004 e1000e_release_hw_control(adapter); |
|
6005 |
|
6006 pci_clear_master(pdev); |
|
6007 |
|
6008 /* The pci-e switch on some quad port adapters will report a |
|
6009 * correctable error when the MAC transitions from D0 to D3. To |
|
6010 * prevent this we need to mask off the correctable errors on the |
|
6011 * downstream port of the pci-e switch. |
|
6012 * |
|
6013 * We don't have the associated upstream bridge while assigning |
|
6014 * the PCI device into guest. For example, the KVM on power is |
|
6015 * one of the cases. |
|
6016 */ |
|
6017 if (adapter->flags & FLAG_IS_QUAD_PORT) { |
|
6018 struct pci_dev *us_dev = pdev->bus->self; |
|
6019 u16 devctl; |
|
6020 |
|
6021 if (!us_dev) |
|
6022 return 0; |
|
6023 |
|
6024 pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl); |
|
6025 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, |
|
6026 (devctl & ~PCI_EXP_DEVCTL_CERE)); |
|
6027 |
|
6028 pci_save_state(pdev); |
|
6029 pci_prepare_to_sleep(pdev); |
|
6030 |
|
6031 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); |
|
6032 } |
|
6033 |
|
6034 return 0; |
|
6035 } |
|
6036 |
|
6037 /** |
|
6038 * e1000e_disable_aspm - Disable ASPM states |
|
6039 * @pdev: pointer to PCI device struct |
|
6040 * @state: bit-mask of ASPM states to disable |
|
6041 * |
|
6042 * Some devices *must* have certain ASPM states disabled per hardware errata. |
|
6043 **/ |
|
6044 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) |
|
6045 { |
|
6046 struct pci_dev *parent = pdev->bus->self; |
|
6047 u16 aspm_dis_mask = 0; |
|
6048 u16 pdev_aspmc, parent_aspmc; |
|
6049 |
|
6050 switch (state) { |
|
6051 case PCIE_LINK_STATE_L0S: |
|
6052 case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1: |
|
6053 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S; |
|
6054 /* fall-through - can't have L1 without L0s */ |
|
6055 case PCIE_LINK_STATE_L1: |
|
6056 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1; |
|
6057 break; |
|
6058 default: |
|
6059 return; |
|
6060 } |
|
6061 |
|
6062 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); |
|
6063 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; |
|
6064 |
|
6065 if (parent) { |
|
6066 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, |
|
6067 &parent_aspmc); |
|
6068 parent_aspmc &= PCI_EXP_LNKCTL_ASPMC; |
|
6069 } |
|
6070 |
|
6071 /* Nothing to do if the ASPM states to be disabled already are */ |
|
6072 if (!(pdev_aspmc & aspm_dis_mask) && |
|
6073 (!parent || !(parent_aspmc & aspm_dis_mask))) |
|
6074 return; |
|
6075 |
|
6076 dev_info(&pdev->dev, "Disabling ASPM %s %s\n", |
|
6077 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ? |
|
6078 "L0s" : "", |
|
6079 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ? |
|
6080 "L1" : ""); |
|
6081 |
|
6082 #ifdef CONFIG_PCIEASPM |
|
6083 pci_disable_link_state_locked(pdev, state); |
|
6084 |
|
6085 /* Double-check ASPM control. If not disabled by the above, the |
|
6086 * BIOS is preventing that from happening (or CONFIG_PCIEASPM is |
|
6087 * not enabled); override by writing PCI config space directly. |
|
6088 */ |
|
6089 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc); |
|
6090 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC; |
|
6091 |
|
6092 if (!(aspm_dis_mask & pdev_aspmc)) |
|
6093 return; |
|
6094 #endif |
|
6095 |
|
6096 /* Both device and parent should have the same ASPM setting. |
|
6097 * Disable ASPM in downstream component first and then upstream. |
|
6098 */ |
|
6099 pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask); |
|
6100 |
|
6101 if (parent) |
|
6102 pcie_capability_clear_word(parent, PCI_EXP_LNKCTL, |
|
6103 aspm_dis_mask); |
|
6104 } |
|
6105 |
|
6106 #ifdef CONFIG_PM |
|
6107 static bool e1000e_pm_ready(struct e1000_adapter *adapter) |
|
6108 { |
|
6109 return !!adapter->tx_ring->buffer_info; |
|
6110 } |
|
6111 |
|
6112 static int __e1000_resume(struct pci_dev *pdev) |
|
6113 { |
|
6114 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6115 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6116 struct e1000_hw *hw = &adapter->hw; |
|
6117 u16 aspm_disable_flag = 0; |
|
6118 u32 err; |
|
6119 |
|
6120 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) |
|
6121 aspm_disable_flag = PCIE_LINK_STATE_L0S; |
|
6122 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) |
|
6123 aspm_disable_flag |= PCIE_LINK_STATE_L1; |
|
6124 if (aspm_disable_flag) |
|
6125 e1000e_disable_aspm(pdev, aspm_disable_flag); |
|
6126 |
|
6127 pci_set_master(pdev); |
|
6128 |
|
6129 e1000e_set_interrupt_capability(adapter); |
|
6130 if (netif_running(netdev)) { |
|
6131 err = e1000_request_irq(adapter); |
|
6132 if (err) |
|
6133 return err; |
|
6134 } |
|
6135 |
|
6136 if (hw->mac.type >= e1000_pch2lan) |
|
6137 e1000_resume_workarounds_pchlan(&adapter->hw); |
|
6138 |
|
6139 e1000e_power_up_phy(adapter); |
|
6140 |
|
6141 /* report the system wakeup cause from S3/S4 */ |
|
6142 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { |
|
6143 u16 phy_data; |
|
6144 |
|
6145 e1e_rphy(&adapter->hw, BM_WUS, &phy_data); |
|
6146 if (phy_data) { |
|
6147 e_info("PHY Wakeup cause - %s\n", |
|
6148 phy_data & E1000_WUS_EX ? "Unicast Packet" : |
|
6149 phy_data & E1000_WUS_MC ? "Multicast Packet" : |
|
6150 phy_data & E1000_WUS_BC ? "Broadcast Packet" : |
|
6151 phy_data & E1000_WUS_MAG ? "Magic Packet" : |
|
6152 phy_data & E1000_WUS_LNKC ? |
|
6153 "Link Status Change" : "other"); |
|
6154 } |
|
6155 e1e_wphy(&adapter->hw, BM_WUS, ~0); |
|
6156 } else { |
|
6157 u32 wus = er32(WUS); |
|
6158 if (wus) { |
|
6159 e_info("MAC Wakeup cause - %s\n", |
|
6160 wus & E1000_WUS_EX ? "Unicast Packet" : |
|
6161 wus & E1000_WUS_MC ? "Multicast Packet" : |
|
6162 wus & E1000_WUS_BC ? "Broadcast Packet" : |
|
6163 wus & E1000_WUS_MAG ? "Magic Packet" : |
|
6164 wus & E1000_WUS_LNKC ? "Link Status Change" : |
|
6165 "other"); |
|
6166 } |
|
6167 ew32(WUS, ~0); |
|
6168 } |
|
6169 |
|
6170 e1000e_reset(adapter); |
|
6171 |
|
6172 e1000_init_manageability_pt(adapter); |
|
6173 |
|
6174 if (netif_running(netdev)) |
|
6175 e1000e_up(adapter); |
|
6176 |
|
6177 netif_device_attach(netdev); |
|
6178 |
|
6179 /* If the controller has AMT, do not set DRV_LOAD until the interface |
|
6180 * is up. For all other cases, let the f/w know that the h/w is now |
|
6181 * under the control of the driver. |
|
6182 */ |
|
6183 if (!(adapter->flags & FLAG_HAS_AMT)) |
|
6184 e1000e_get_hw_control(adapter); |
|
6185 |
|
6186 return 0; |
|
6187 } |
|
6188 |
|
6189 #ifdef CONFIG_PM_SLEEP |
|
6190 static int e1000_suspend(struct device *dev) |
|
6191 { |
|
6192 struct pci_dev *pdev = to_pci_dev(dev); |
|
6193 |
|
6194 return __e1000_shutdown(pdev, false); |
|
6195 } |
|
6196 |
|
6197 static int e1000_resume(struct device *dev) |
|
6198 { |
|
6199 struct pci_dev *pdev = to_pci_dev(dev); |
|
6200 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6201 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6202 |
|
6203 if (e1000e_pm_ready(adapter)) |
|
6204 adapter->idle_check = true; |
|
6205 |
|
6206 return __e1000_resume(pdev); |
|
6207 } |
|
6208 #endif /* CONFIG_PM_SLEEP */ |
|
6209 |
|
6210 #ifdef CONFIG_PM_RUNTIME |
|
6211 static int e1000_runtime_suspend(struct device *dev) |
|
6212 { |
|
6213 struct pci_dev *pdev = to_pci_dev(dev); |
|
6214 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6215 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6216 |
|
6217 if (!e1000e_pm_ready(adapter)) |
|
6218 return 0; |
|
6219 |
|
6220 return __e1000_shutdown(pdev, true); |
|
6221 } |
|
6222 |
|
6223 static int e1000_idle(struct device *dev) |
|
6224 { |
|
6225 struct pci_dev *pdev = to_pci_dev(dev); |
|
6226 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6227 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6228 |
|
6229 if (!e1000e_pm_ready(adapter)) |
|
6230 return 0; |
|
6231 |
|
6232 if (adapter->idle_check) { |
|
6233 adapter->idle_check = false; |
|
6234 if (!e1000e_has_link(adapter)) |
|
6235 pm_schedule_suspend(dev, MSEC_PER_SEC); |
|
6236 } |
|
6237 |
|
6238 return -EBUSY; |
|
6239 } |
|
6240 |
|
6241 static int e1000_runtime_resume(struct device *dev) |
|
6242 { |
|
6243 struct pci_dev *pdev = to_pci_dev(dev); |
|
6244 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6245 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6246 |
|
6247 if (!e1000e_pm_ready(adapter)) |
|
6248 return 0; |
|
6249 |
|
6250 adapter->idle_check = !dev->power.runtime_auto; |
|
6251 return __e1000_resume(pdev); |
|
6252 } |
|
6253 #endif /* CONFIG_PM_RUNTIME */ |
|
6254 #endif /* CONFIG_PM */ |
|
6255 |
|
6256 static void e1000_shutdown(struct pci_dev *pdev) |
|
6257 { |
|
6258 __e1000_shutdown(pdev, false); |
|
6259 } |
|
6260 |
|
6261 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
6262 |
|
6263 static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data) |
|
6264 { |
|
6265 struct net_device *netdev = data; |
|
6266 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6267 |
|
6268 if (adapter->msix_entries) { |
|
6269 int vector, msix_irq; |
|
6270 |
|
6271 vector = 0; |
|
6272 msix_irq = adapter->msix_entries[vector].vector; |
|
6273 disable_irq(msix_irq); |
|
6274 e1000_intr_msix_rx(msix_irq, netdev); |
|
6275 enable_irq(msix_irq); |
|
6276 |
|
6277 vector++; |
|
6278 msix_irq = adapter->msix_entries[vector].vector; |
|
6279 disable_irq(msix_irq); |
|
6280 e1000_intr_msix_tx(msix_irq, netdev); |
|
6281 enable_irq(msix_irq); |
|
6282 |
|
6283 vector++; |
|
6284 msix_irq = adapter->msix_entries[vector].vector; |
|
6285 disable_irq(msix_irq); |
|
6286 e1000_msix_other(msix_irq, netdev); |
|
6287 enable_irq(msix_irq); |
|
6288 } |
|
6289 |
|
6290 return IRQ_HANDLED; |
|
6291 } |
|
6292 |
|
6293 /** |
|
6294 * e1000_netpoll |
|
6295 * @netdev: network interface device structure |
|
6296 * |
|
6297 * Polling 'interrupt' - used by things like netconsole to send skbs |
|
6298 * without having to re-enable interrupts. It's not called while |
|
6299 * the interrupt routine is executing. |
|
6300 */ |
|
6301 static void e1000_netpoll(struct net_device *netdev) |
|
6302 { |
|
6303 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6304 |
|
6305 switch (adapter->int_mode) { |
|
6306 case E1000E_INT_MODE_MSIX: |
|
6307 e1000_intr_msix(adapter->pdev->irq, netdev); |
|
6308 break; |
|
6309 case E1000E_INT_MODE_MSI: |
|
6310 disable_irq(adapter->pdev->irq); |
|
6311 e1000_intr_msi(adapter->pdev->irq, netdev); |
|
6312 enable_irq(adapter->pdev->irq); |
|
6313 break; |
|
6314 default: /* E1000E_INT_MODE_LEGACY */ |
|
6315 disable_irq(adapter->pdev->irq); |
|
6316 e1000_intr(adapter->pdev->irq, netdev); |
|
6317 enable_irq(adapter->pdev->irq); |
|
6318 break; |
|
6319 } |
|
6320 } |
|
6321 #endif |
|
6322 |
|
6323 /** |
|
6324 * e1000_io_error_detected - called when PCI error is detected |
|
6325 * @pdev: Pointer to PCI device |
|
6326 * @state: The current pci connection state |
|
6327 * |
|
6328 * This function is called after a PCI bus error affecting |
|
6329 * this device has been detected. |
|
6330 */ |
|
6331 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, |
|
6332 pci_channel_state_t state) |
|
6333 { |
|
6334 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6335 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6336 |
|
6337 netif_device_detach(netdev); |
|
6338 |
|
6339 if (state == pci_channel_io_perm_failure) |
|
6340 return PCI_ERS_RESULT_DISCONNECT; |
|
6341 |
|
6342 if (netif_running(netdev)) |
|
6343 e1000e_down(adapter); |
|
6344 pci_disable_device(pdev); |
|
6345 |
|
6346 /* Request a slot slot reset. */ |
|
6347 return PCI_ERS_RESULT_NEED_RESET; |
|
6348 } |
|
6349 |
|
6350 /** |
|
6351 * e1000_io_slot_reset - called after the pci bus has been reset. |
|
6352 * @pdev: Pointer to PCI device |
|
6353 * |
|
6354 * Restart the card from scratch, as if from a cold-boot. Implementation |
|
6355 * resembles the first-half of the e1000_resume routine. |
|
6356 */ |
|
6357 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) |
|
6358 { |
|
6359 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6360 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6361 struct e1000_hw *hw = &adapter->hw; |
|
6362 u16 aspm_disable_flag = 0; |
|
6363 int err; |
|
6364 pci_ers_result_t result; |
|
6365 |
|
6366 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S) |
|
6367 aspm_disable_flag = PCIE_LINK_STATE_L0S; |
|
6368 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) |
|
6369 aspm_disable_flag |= PCIE_LINK_STATE_L1; |
|
6370 if (aspm_disable_flag) |
|
6371 e1000e_disable_aspm(pdev, aspm_disable_flag); |
|
6372 |
|
6373 err = pci_enable_device_mem(pdev); |
|
6374 if (err) { |
|
6375 dev_err(&pdev->dev, |
|
6376 "Cannot re-enable PCI device after reset.\n"); |
|
6377 result = PCI_ERS_RESULT_DISCONNECT; |
|
6378 } else { |
|
6379 pdev->state_saved = true; |
|
6380 pci_restore_state(pdev); |
|
6381 pci_set_master(pdev); |
|
6382 |
|
6383 pci_enable_wake(pdev, PCI_D3hot, 0); |
|
6384 pci_enable_wake(pdev, PCI_D3cold, 0); |
|
6385 |
|
6386 e1000e_reset(adapter); |
|
6387 ew32(WUS, ~0); |
|
6388 result = PCI_ERS_RESULT_RECOVERED; |
|
6389 } |
|
6390 |
|
6391 pci_cleanup_aer_uncorrect_error_status(pdev); |
|
6392 |
|
6393 return result; |
|
6394 } |
|
6395 |
|
6396 /** |
|
6397 * e1000_io_resume - called when traffic can start flowing again. |
|
6398 * @pdev: Pointer to PCI device |
|
6399 * |
|
6400 * This callback is called when the error recovery driver tells us that |
|
6401 * its OK to resume normal operation. Implementation resembles the |
|
6402 * second-half of the e1000_resume routine. |
|
6403 */ |
|
6404 static void e1000_io_resume(struct pci_dev *pdev) |
|
6405 { |
|
6406 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6407 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6408 |
|
6409 e1000_init_manageability_pt(adapter); |
|
6410 |
|
6411 if (netif_running(netdev)) { |
|
6412 if (e1000e_up(adapter)) { |
|
6413 dev_err(&pdev->dev, |
|
6414 "can't bring device back up after reset\n"); |
|
6415 return; |
|
6416 } |
|
6417 } |
|
6418 |
|
6419 netif_device_attach(netdev); |
|
6420 |
|
6421 /* If the controller has AMT, do not set DRV_LOAD until the interface |
|
6422 * is up. For all other cases, let the f/w know that the h/w is now |
|
6423 * under the control of the driver. |
|
6424 */ |
|
6425 if (!(adapter->flags & FLAG_HAS_AMT)) |
|
6426 e1000e_get_hw_control(adapter); |
|
6427 } |
|
6428 |
|
6429 static void e1000_print_device_info(struct e1000_adapter *adapter) |
|
6430 { |
|
6431 struct e1000_hw *hw = &adapter->hw; |
|
6432 struct net_device *netdev = adapter->netdev; |
|
6433 u32 ret_val; |
|
6434 u8 pba_str[E1000_PBANUM_LENGTH]; |
|
6435 |
|
6436 /* print bus type/speed/width info */ |
|
6437 e_info("(PCI Express:2.5GT/s:%s) %pM\n", |
|
6438 /* bus width */ |
|
6439 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : |
|
6440 "Width x1"), |
|
6441 /* MAC address */ |
|
6442 netdev->dev_addr); |
|
6443 e_info("Intel(R) PRO/%s Network Connection\n", |
|
6444 (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); |
|
6445 ret_val = e1000_read_pba_string_generic(hw, pba_str, |
|
6446 E1000_PBANUM_LENGTH); |
|
6447 if (ret_val) |
|
6448 strlcpy((char *)pba_str, "Unknown", sizeof(pba_str)); |
|
6449 e_info("MAC: %d, PHY: %d, PBA No: %s\n", |
|
6450 hw->mac.type, hw->phy.type, pba_str); |
|
6451 } |
|
6452 |
|
6453 static void e1000_eeprom_checks(struct e1000_adapter *adapter) |
|
6454 { |
|
6455 struct e1000_hw *hw = &adapter->hw; |
|
6456 int ret_val; |
|
6457 u16 buf = 0; |
|
6458 |
|
6459 if (hw->mac.type != e1000_82573) |
|
6460 return; |
|
6461 |
|
6462 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); |
|
6463 le16_to_cpus(&buf); |
|
6464 if (!ret_val && (!(buf & (1 << 0)))) { |
|
6465 /* Deep Smart Power Down (DSPD) */ |
|
6466 dev_warn(&adapter->pdev->dev, |
|
6467 "Warning: detected DSPD enabled in EEPROM\n"); |
|
6468 } |
|
6469 } |
|
6470 |
|
6471 static int e1000_set_features(struct net_device *netdev, |
|
6472 netdev_features_t features) |
|
6473 { |
|
6474 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6475 netdev_features_t changed = features ^ netdev->features; |
|
6476 |
|
6477 if (changed & (NETIF_F_TSO | NETIF_F_TSO6)) |
|
6478 adapter->flags |= FLAG_TSO_FORCE; |
|
6479 |
|
6480 if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX | |
|
6481 NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS | |
|
6482 NETIF_F_RXALL))) |
|
6483 return 0; |
|
6484 |
|
6485 if (changed & NETIF_F_RXFCS) { |
|
6486 if (features & NETIF_F_RXFCS) { |
|
6487 adapter->flags2 &= ~FLAG2_CRC_STRIPPING; |
|
6488 } else { |
|
6489 /* We need to take it back to defaults, which might mean |
|
6490 * stripping is still disabled at the adapter level. |
|
6491 */ |
|
6492 if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING) |
|
6493 adapter->flags2 |= FLAG2_CRC_STRIPPING; |
|
6494 else |
|
6495 adapter->flags2 &= ~FLAG2_CRC_STRIPPING; |
|
6496 } |
|
6497 } |
|
6498 |
|
6499 netdev->features = features; |
|
6500 |
|
6501 if (netif_running(netdev)) |
|
6502 e1000e_reinit_locked(adapter); |
|
6503 else |
|
6504 e1000e_reset(adapter); |
|
6505 |
|
6506 return 0; |
|
6507 } |
|
6508 |
|
6509 static const struct net_device_ops e1000e_netdev_ops = { |
|
6510 .ndo_open = e1000_open, |
|
6511 .ndo_stop = e1000_close, |
|
6512 .ndo_start_xmit = e1000_xmit_frame, |
|
6513 .ndo_get_stats64 = e1000e_get_stats64, |
|
6514 .ndo_set_rx_mode = e1000e_set_rx_mode, |
|
6515 .ndo_set_mac_address = e1000_set_mac, |
|
6516 .ndo_change_mtu = e1000_change_mtu, |
|
6517 .ndo_do_ioctl = e1000_ioctl, |
|
6518 .ndo_tx_timeout = e1000_tx_timeout, |
|
6519 .ndo_validate_addr = eth_validate_addr, |
|
6520 |
|
6521 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid, |
|
6522 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid, |
|
6523 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
6524 .ndo_poll_controller = e1000_netpoll, |
|
6525 #endif |
|
6526 .ndo_set_features = e1000_set_features, |
|
6527 }; |
|
6528 |
|
6529 /** |
|
6530 * e1000_probe - Device Initialization Routine |
|
6531 * @pdev: PCI device information struct |
|
6532 * @ent: entry in e1000_pci_tbl |
|
6533 * |
|
6534 * Returns 0 on success, negative on failure |
|
6535 * |
|
6536 * e1000_probe initializes an adapter identified by a pci_dev structure. |
|
6537 * The OS initialization, configuring of the adapter private structure, |
|
6538 * and a hardware reset occur. |
|
6539 **/ |
|
6540 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
|
6541 { |
|
6542 struct net_device *netdev; |
|
6543 struct e1000_adapter *adapter; |
|
6544 struct e1000_hw *hw; |
|
6545 const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; |
|
6546 resource_size_t mmio_start, mmio_len; |
|
6547 resource_size_t flash_start, flash_len; |
|
6548 static int cards_found; |
|
6549 u16 aspm_disable_flag = 0; |
|
6550 int bars, i, err, pci_using_dac; |
|
6551 u16 eeprom_data = 0; |
|
6552 u16 eeprom_apme_mask = E1000_EEPROM_APME; |
|
6553 |
|
6554 if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S) |
|
6555 aspm_disable_flag = PCIE_LINK_STATE_L0S; |
|
6556 if (ei->flags2 & FLAG2_DISABLE_ASPM_L1) |
|
6557 aspm_disable_flag |= PCIE_LINK_STATE_L1; |
|
6558 if (aspm_disable_flag) |
|
6559 e1000e_disable_aspm(pdev, aspm_disable_flag); |
|
6560 |
|
6561 err = pci_enable_device_mem(pdev); |
|
6562 if (err) |
|
6563 return err; |
|
6564 |
|
6565 pci_using_dac = 0; |
|
6566 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); |
|
6567 if (!err) { |
|
6568 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); |
|
6569 if (!err) |
|
6570 pci_using_dac = 1; |
|
6571 } else { |
|
6572 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
|
6573 if (err) { |
|
6574 err = dma_set_coherent_mask(&pdev->dev, |
|
6575 DMA_BIT_MASK(32)); |
|
6576 if (err) { |
|
6577 dev_err(&pdev->dev, |
|
6578 "No usable DMA configuration, aborting\n"); |
|
6579 goto err_dma; |
|
6580 } |
|
6581 } |
|
6582 } |
|
6583 |
|
6584 bars = pci_select_bars(pdev, IORESOURCE_MEM); |
|
6585 err = pci_request_selected_regions_exclusive(pdev, bars, |
|
6586 e1000e_driver_name); |
|
6587 if (err) |
|
6588 goto err_pci_reg; |
|
6589 |
|
6590 /* AER (Advanced Error Reporting) hooks */ |
|
6591 pci_enable_pcie_error_reporting(pdev); |
|
6592 |
|
6593 pci_set_master(pdev); |
|
6594 /* PCI config space info */ |
|
6595 err = pci_save_state(pdev); |
|
6596 if (err) |
|
6597 goto err_alloc_etherdev; |
|
6598 |
|
6599 err = -ENOMEM; |
|
6600 netdev = alloc_etherdev(sizeof(struct e1000_adapter)); |
|
6601 if (!netdev) |
|
6602 goto err_alloc_etherdev; |
|
6603 |
|
6604 SET_NETDEV_DEV(netdev, &pdev->dev); |
|
6605 |
|
6606 netdev->irq = pdev->irq; |
|
6607 |
|
6608 pci_set_drvdata(pdev, netdev); |
|
6609 adapter = netdev_priv(netdev); |
|
6610 hw = &adapter->hw; |
|
6611 adapter->netdev = netdev; |
|
6612 adapter->pdev = pdev; |
|
6613 adapter->ei = ei; |
|
6614 adapter->pba = ei->pba; |
|
6615 adapter->flags = ei->flags; |
|
6616 adapter->flags2 = ei->flags2; |
|
6617 adapter->hw.adapter = adapter; |
|
6618 adapter->hw.mac.type = ei->mac; |
|
6619 adapter->max_hw_frame_size = ei->max_hw_frame_size; |
|
6620 adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); |
|
6621 |
|
6622 mmio_start = pci_resource_start(pdev, 0); |
|
6623 mmio_len = pci_resource_len(pdev, 0); |
|
6624 |
|
6625 err = -EIO; |
|
6626 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len); |
|
6627 if (!adapter->hw.hw_addr) |
|
6628 goto err_ioremap; |
|
6629 |
|
6630 if ((adapter->flags & FLAG_HAS_FLASH) && |
|
6631 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { |
|
6632 flash_start = pci_resource_start(pdev, 1); |
|
6633 flash_len = pci_resource_len(pdev, 1); |
|
6634 adapter->hw.flash_address = ioremap(flash_start, flash_len); |
|
6635 if (!adapter->hw.flash_address) |
|
6636 goto err_flashmap; |
|
6637 } |
|
6638 |
|
6639 /* Set default EEE advertisement */ |
|
6640 if (adapter->flags2 & FLAG2_HAS_EEE) |
|
6641 adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; |
|
6642 |
|
6643 /* construct the net_device struct */ |
|
6644 netdev->netdev_ops = &e1000e_netdev_ops; |
|
6645 e1000e_set_ethtool_ops(netdev); |
|
6646 netdev->watchdog_timeo = 5 * HZ; |
|
6647 netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64); |
|
6648 strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); |
|
6649 |
|
6650 netdev->mem_start = mmio_start; |
|
6651 netdev->mem_end = mmio_start + mmio_len; |
|
6652 |
|
6653 adapter->bd_number = cards_found++; |
|
6654 |
|
6655 e1000e_check_options(adapter); |
|
6656 |
|
6657 /* setup adapter struct */ |
|
6658 err = e1000_sw_init(adapter); |
|
6659 if (err) |
|
6660 goto err_sw_init; |
|
6661 |
|
6662 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); |
|
6663 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); |
|
6664 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); |
|
6665 |
|
6666 err = ei->get_variants(adapter); |
|
6667 if (err) |
|
6668 goto err_hw_init; |
|
6669 |
|
6670 if ((adapter->flags & FLAG_IS_ICH) && |
|
6671 (adapter->flags & FLAG_READ_ONLY_NVM)) |
|
6672 e1000e_write_protect_nvm_ich8lan(&adapter->hw); |
|
6673 |
|
6674 hw->mac.ops.get_bus_info(&adapter->hw); |
|
6675 |
|
6676 adapter->hw.phy.autoneg_wait_to_complete = 0; |
|
6677 |
|
6678 /* Copper options */ |
|
6679 if (adapter->hw.phy.media_type == e1000_media_type_copper) { |
|
6680 adapter->hw.phy.mdix = AUTO_ALL_MODES; |
|
6681 adapter->hw.phy.disable_polarity_correction = 0; |
|
6682 adapter->hw.phy.ms_type = e1000_ms_hw_default; |
|
6683 } |
|
6684 |
|
6685 if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) |
|
6686 dev_info(&pdev->dev, |
|
6687 "PHY reset is blocked due to SOL/IDER session.\n"); |
|
6688 |
|
6689 /* Set initial default active device features */ |
|
6690 netdev->features = (NETIF_F_SG | |
|
6691 NETIF_F_HW_VLAN_CTAG_RX | |
|
6692 NETIF_F_HW_VLAN_CTAG_TX | |
|
6693 NETIF_F_TSO | |
|
6694 NETIF_F_TSO6 | |
|
6695 NETIF_F_RXHASH | |
|
6696 NETIF_F_RXCSUM | |
|
6697 NETIF_F_HW_CSUM); |
|
6698 |
|
6699 /* Set user-changeable features (subset of all device features) */ |
|
6700 netdev->hw_features = netdev->features; |
|
6701 netdev->hw_features |= NETIF_F_RXFCS; |
|
6702 netdev->priv_flags |= IFF_SUPP_NOFCS; |
|
6703 netdev->hw_features |= NETIF_F_RXALL; |
|
6704 |
|
6705 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) |
|
6706 netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; |
|
6707 |
|
6708 netdev->vlan_features |= (NETIF_F_SG | |
|
6709 NETIF_F_TSO | |
|
6710 NETIF_F_TSO6 | |
|
6711 NETIF_F_HW_CSUM); |
|
6712 |
|
6713 netdev->priv_flags |= IFF_UNICAST_FLT; |
|
6714 |
|
6715 if (pci_using_dac) { |
|
6716 netdev->features |= NETIF_F_HIGHDMA; |
|
6717 netdev->vlan_features |= NETIF_F_HIGHDMA; |
|
6718 } |
|
6719 |
|
6720 if (e1000e_enable_mng_pass_thru(&adapter->hw)) |
|
6721 adapter->flags |= FLAG_MNG_PT_ENABLED; |
|
6722 |
|
6723 /* before reading the NVM, reset the controller to |
|
6724 * put the device in a known good starting state |
|
6725 */ |
|
6726 adapter->hw.mac.ops.reset_hw(&adapter->hw); |
|
6727 |
|
6728 /* systems with ASPM and others may see the checksum fail on the first |
|
6729 * attempt. Let's give it a few tries |
|
6730 */ |
|
6731 for (i = 0;; i++) { |
|
6732 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) |
|
6733 break; |
|
6734 if (i == 2) { |
|
6735 dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n"); |
|
6736 err = -EIO; |
|
6737 goto err_eeprom; |
|
6738 } |
|
6739 } |
|
6740 |
|
6741 e1000_eeprom_checks(adapter); |
|
6742 |
|
6743 /* copy the MAC address */ |
|
6744 if (e1000e_read_mac_addr(&adapter->hw)) |
|
6745 dev_err(&pdev->dev, |
|
6746 "NVM Read Error while reading MAC address\n"); |
|
6747 |
|
6748 memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); |
|
6749 |
|
6750 if (!is_valid_ether_addr(netdev->dev_addr)) { |
|
6751 dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", |
|
6752 netdev->dev_addr); |
|
6753 err = -EIO; |
|
6754 goto err_eeprom; |
|
6755 } |
|
6756 |
|
6757 init_timer(&adapter->watchdog_timer); |
|
6758 adapter->watchdog_timer.function = e1000_watchdog; |
|
6759 adapter->watchdog_timer.data = (unsigned long)adapter; |
|
6760 |
|
6761 init_timer(&adapter->phy_info_timer); |
|
6762 adapter->phy_info_timer.function = e1000_update_phy_info; |
|
6763 adapter->phy_info_timer.data = (unsigned long)adapter; |
|
6764 |
|
6765 INIT_WORK(&adapter->reset_task, e1000_reset_task); |
|
6766 INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); |
|
6767 INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); |
|
6768 INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); |
|
6769 INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); |
|
6770 |
|
6771 /* Initialize link parameters. User can change them with ethtool */ |
|
6772 adapter->hw.mac.autoneg = 1; |
|
6773 adapter->fc_autoneg = true; |
|
6774 adapter->hw.fc.requested_mode = e1000_fc_default; |
|
6775 adapter->hw.fc.current_mode = e1000_fc_default; |
|
6776 adapter->hw.phy.autoneg_advertised = 0x2f; |
|
6777 |
|
6778 /* Initial Wake on LAN setting - If APM wake is enabled in |
|
6779 * the EEPROM, enable the ACPI Magic Packet filter |
|
6780 */ |
|
6781 if (adapter->flags & FLAG_APME_IN_WUC) { |
|
6782 /* APME bit in EEPROM is mapped to WUC.APME */ |
|
6783 eeprom_data = er32(WUC); |
|
6784 eeprom_apme_mask = E1000_WUC_APME; |
|
6785 if ((hw->mac.type > e1000_ich10lan) && |
|
6786 (eeprom_data & E1000_WUC_PHY_WAKE)) |
|
6787 adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP; |
|
6788 } else if (adapter->flags & FLAG_APME_IN_CTRL3) { |
|
6789 if (adapter->flags & FLAG_APME_CHECK_PORT_B && |
|
6790 (adapter->hw.bus.func == 1)) |
|
6791 e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B, |
|
6792 1, &eeprom_data); |
|
6793 else |
|
6794 e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A, |
|
6795 1, &eeprom_data); |
|
6796 } |
|
6797 |
|
6798 /* fetch WoL from EEPROM */ |
|
6799 if (eeprom_data & eeprom_apme_mask) |
|
6800 adapter->eeprom_wol |= E1000_WUFC_MAG; |
|
6801 |
|
6802 /* now that we have the eeprom settings, apply the special cases |
|
6803 * where the eeprom may be wrong or the board simply won't support |
|
6804 * wake on lan on a particular port |
|
6805 */ |
|
6806 if (!(adapter->flags & FLAG_HAS_WOL)) |
|
6807 adapter->eeprom_wol = 0; |
|
6808 |
|
6809 /* initialize the wol settings based on the eeprom settings */ |
|
6810 adapter->wol = adapter->eeprom_wol; |
|
6811 |
|
6812 /* make sure adapter isn't asleep if manageability is enabled */ |
|
6813 if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || |
|
6814 (hw->mac.ops.check_mng_mode(hw))) |
|
6815 device_wakeup_enable(&pdev->dev); |
|
6816 |
|
6817 /* save off EEPROM version number */ |
|
6818 e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); |
|
6819 |
|
6820 /* reset the hardware with the new settings */ |
|
6821 e1000e_reset(adapter); |
|
6822 |
|
6823 /* If the controller has AMT, do not set DRV_LOAD until the interface |
|
6824 * is up. For all other cases, let the f/w know that the h/w is now |
|
6825 * under the control of the driver. |
|
6826 */ |
|
6827 if (!(adapter->flags & FLAG_HAS_AMT)) |
|
6828 e1000e_get_hw_control(adapter); |
|
6829 |
|
6830 strlcpy(netdev->name, "eth%d", sizeof(netdev->name)); |
|
6831 err = register_netdev(netdev); |
|
6832 if (err) |
|
6833 goto err_register; |
|
6834 |
|
6835 /* carrier off reporting is important to ethtool even BEFORE open */ |
|
6836 netif_carrier_off(netdev); |
|
6837 |
|
6838 /* init PTP hardware clock */ |
|
6839 e1000e_ptp_init(adapter); |
|
6840 |
|
6841 e1000_print_device_info(adapter); |
|
6842 |
|
6843 if (pci_dev_run_wake(pdev)) |
|
6844 pm_runtime_put_noidle(&pdev->dev); |
|
6845 |
|
6846 return 0; |
|
6847 |
|
6848 err_register: |
|
6849 if (!(adapter->flags & FLAG_HAS_AMT)) |
|
6850 e1000e_release_hw_control(adapter); |
|
6851 err_eeprom: |
|
6852 if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw)) |
|
6853 e1000_phy_hw_reset(&adapter->hw); |
|
6854 err_hw_init: |
|
6855 kfree(adapter->tx_ring); |
|
6856 kfree(adapter->rx_ring); |
|
6857 err_sw_init: |
|
6858 if (adapter->hw.flash_address) |
|
6859 iounmap(adapter->hw.flash_address); |
|
6860 e1000e_reset_interrupt_capability(adapter); |
|
6861 err_flashmap: |
|
6862 iounmap(adapter->hw.hw_addr); |
|
6863 err_ioremap: |
|
6864 free_netdev(netdev); |
|
6865 err_alloc_etherdev: |
|
6866 pci_release_selected_regions(pdev, |
|
6867 pci_select_bars(pdev, IORESOURCE_MEM)); |
|
6868 err_pci_reg: |
|
6869 err_dma: |
|
6870 pci_disable_device(pdev); |
|
6871 return err; |
|
6872 } |
|
6873 |
|
6874 /** |
|
6875 * e1000_remove - Device Removal Routine |
|
6876 * @pdev: PCI device information struct |
|
6877 * |
|
6878 * e1000_remove is called by the PCI subsystem to alert the driver |
|
6879 * that it should release a PCI device. The could be caused by a |
|
6880 * Hot-Plug event, or because the driver is going to be removed from |
|
6881 * memory. |
|
6882 **/ |
|
6883 static void e1000_remove(struct pci_dev *pdev) |
|
6884 { |
|
6885 struct net_device *netdev = pci_get_drvdata(pdev); |
|
6886 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
6887 bool down = test_bit(__E1000_DOWN, &adapter->state); |
|
6888 |
|
6889 e1000e_ptp_remove(adapter); |
|
6890 |
|
6891 /* The timers may be rescheduled, so explicitly disable them |
|
6892 * from being rescheduled. |
|
6893 */ |
|
6894 if (!down) |
|
6895 set_bit(__E1000_DOWN, &adapter->state); |
|
6896 del_timer_sync(&adapter->watchdog_timer); |
|
6897 del_timer_sync(&adapter->phy_info_timer); |
|
6898 |
|
6899 cancel_work_sync(&adapter->reset_task); |
|
6900 cancel_work_sync(&adapter->watchdog_task); |
|
6901 cancel_work_sync(&adapter->downshift_task); |
|
6902 cancel_work_sync(&adapter->update_phy_task); |
|
6903 cancel_work_sync(&adapter->print_hang_task); |
|
6904 |
|
6905 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { |
|
6906 cancel_work_sync(&adapter->tx_hwtstamp_work); |
|
6907 if (adapter->tx_hwtstamp_skb) { |
|
6908 dev_kfree_skb_any(adapter->tx_hwtstamp_skb); |
|
6909 adapter->tx_hwtstamp_skb = NULL; |
|
6910 } |
|
6911 } |
|
6912 |
|
6913 if (!(netdev->flags & IFF_UP)) |
|
6914 e1000_power_down_phy(adapter); |
|
6915 |
|
6916 /* Don't lie to e1000_close() down the road. */ |
|
6917 if (!down) |
|
6918 clear_bit(__E1000_DOWN, &adapter->state); |
|
6919 unregister_netdev(netdev); |
|
6920 |
|
6921 if (pci_dev_run_wake(pdev)) |
|
6922 pm_runtime_get_noresume(&pdev->dev); |
|
6923 |
|
6924 /* Release control of h/w to f/w. If f/w is AMT enabled, this |
|
6925 * would have already happened in close and is redundant. |
|
6926 */ |
|
6927 e1000e_release_hw_control(adapter); |
|
6928 |
|
6929 e1000e_reset_interrupt_capability(adapter); |
|
6930 kfree(adapter->tx_ring); |
|
6931 kfree(adapter->rx_ring); |
|
6932 |
|
6933 iounmap(adapter->hw.hw_addr); |
|
6934 if (adapter->hw.flash_address) |
|
6935 iounmap(adapter->hw.flash_address); |
|
6936 pci_release_selected_regions(pdev, |
|
6937 pci_select_bars(pdev, IORESOURCE_MEM)); |
|
6938 |
|
6939 free_netdev(netdev); |
|
6940 |
|
6941 /* AER disable */ |
|
6942 pci_disable_pcie_error_reporting(pdev); |
|
6943 |
|
6944 pci_disable_device(pdev); |
|
6945 } |
|
6946 |
|
6947 /* PCI Error Recovery (ERS) */ |
|
6948 static const struct pci_error_handlers e1000_err_handler = { |
|
6949 .error_detected = e1000_io_error_detected, |
|
6950 .slot_reset = e1000_io_slot_reset, |
|
6951 .resume = e1000_io_resume, |
|
6952 }; |
|
6953 |
|
6954 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { |
|
6955 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, |
|
6956 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, |
|
6957 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, |
|
6958 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), |
|
6959 board_82571 }, |
|
6960 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 }, |
|
6961 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 }, |
|
6962 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, |
|
6963 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, |
|
6964 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, |
|
6965 |
|
6966 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, |
|
6967 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, |
|
6968 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, |
|
6969 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, |
|
6970 |
|
6971 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, |
|
6972 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, |
|
6973 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, |
|
6974 |
|
6975 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, |
|
6976 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 }, |
|
6977 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 }, |
|
6978 |
|
6979 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), |
|
6980 board_80003es2lan }, |
|
6981 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), |
|
6982 board_80003es2lan }, |
|
6983 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT), |
|
6984 board_80003es2lan }, |
|
6985 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), |
|
6986 board_80003es2lan }, |
|
6987 |
|
6988 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, |
|
6989 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, |
|
6990 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, |
|
6991 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan }, |
|
6992 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, |
|
6993 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, |
|
6994 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, |
|
6995 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan }, |
|
6996 |
|
6997 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, |
|
6998 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, |
|
6999 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, |
|
7000 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan }, |
|
7001 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan }, |
|
7002 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan }, |
|
7003 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan }, |
|
7004 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan }, |
|
7005 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan }, |
|
7006 |
|
7007 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan }, |
|
7008 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan }, |
|
7009 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan }, |
|
7010 |
|
7011 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan }, |
|
7012 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan }, |
|
7013 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan }, |
|
7014 |
|
7015 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan }, |
|
7016 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan }, |
|
7017 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan }, |
|
7018 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan }, |
|
7019 |
|
7020 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan }, |
|
7021 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan }, |
|
7022 |
|
7023 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt }, |
|
7024 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, |
|
7025 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt }, |
|
7026 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt }, |
|
7027 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt }, |
|
7028 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, |
|
7029 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, |
|
7030 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, |
|
7031 |
|
7032 { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ |
|
7033 }; |
|
7034 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); |
|
7035 |
|
7036 #ifdef CONFIG_PM |
|
7037 static const struct dev_pm_ops e1000_pm_ops = { |
|
7038 SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume) |
|
7039 SET_RUNTIME_PM_OPS(e1000_runtime_suspend, e1000_runtime_resume, |
|
7040 e1000_idle) |
|
7041 }; |
|
7042 #endif |
|
7043 |
|
7044 /* PCI Device API Driver */ |
|
7045 static struct pci_driver e1000_driver = { |
|
7046 .name = e1000e_driver_name, |
|
7047 .id_table = e1000_pci_tbl, |
|
7048 .probe = e1000_probe, |
|
7049 .remove = e1000_remove, |
|
7050 #ifdef CONFIG_PM |
|
7051 .driver = { |
|
7052 .pm = &e1000_pm_ops, |
|
7053 }, |
|
7054 #endif |
|
7055 .shutdown = e1000_shutdown, |
|
7056 .err_handler = &e1000_err_handler |
|
7057 }; |
|
7058 |
|
7059 /** |
|
7060 * e1000_init_module - Driver Registration Routine |
|
7061 * |
|
7062 * e1000_init_module is the first routine called when the driver is |
|
7063 * loaded. All it does is register with the PCI subsystem. |
|
7064 **/ |
|
7065 static int __init e1000_init_module(void) |
|
7066 { |
|
7067 int ret; |
|
7068 pr_info("Intel(R) PRO/1000 Network Driver - %s\n", |
|
7069 e1000e_driver_version); |
|
7070 pr_info("Copyright(c) 1999 - 2013 Intel Corporation.\n"); |
|
7071 ret = pci_register_driver(&e1000_driver); |
|
7072 |
|
7073 return ret; |
|
7074 } |
|
7075 module_init(e1000_init_module); |
|
7076 |
|
7077 /** |
|
7078 * e1000_exit_module - Driver Exit Cleanup Routine |
|
7079 * |
|
7080 * e1000_exit_module is called just before the driver is removed |
|
7081 * from memory. |
|
7082 **/ |
|
7083 static void __exit e1000_exit_module(void) |
|
7084 { |
|
7085 pci_unregister_driver(&e1000_driver); |
|
7086 } |
|
7087 module_exit(e1000_exit_module); |
|
7088 |
|
7089 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
|
7090 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); |
|
7091 MODULE_LICENSE("GPL"); |
|
7092 MODULE_VERSION(DRV_VERSION); |
|
7093 |
|
7094 /* netdev.c */ |