etherlabmaster: comparison devices/e1000e/ich8lan-3.6-ethercat.c

equal deleted inserted replaced

-:80177f7aa836
+:2fa43746d972
+/*******************************************************************************
+Intel PRO/1000 Linux driver
+Copyright(c) 1999 - 2012 Intel Corporation.
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.
+This program is distributed in the hope it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+The full GNU General Public License is included in this distribution in
+the file called "COPYING".
+Contact Information:
+Linux NICS <linux.nics@intel.com>
+e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+*******************************************************************************/
+/*
+* 82562G 10/100 Network Connection
+* 82562G-2 10/100 Network Connection
+* 82562GT 10/100 Network Connection
+* 82562GT-2 10/100 Network Connection
+* 82562V 10/100 Network Connection
+* 82562V-2 10/100 Network Connection
+* 82566DC-2 Gigabit Network Connection
+* 82566DC Gigabit Network Connection
+* 82566DM-2 Gigabit Network Connection
+* 82566DM Gigabit Network Connection
+* 82566MC Gigabit Network Connection
+* 82566MM Gigabit Network Connection
+* 82567LM Gigabit Network Connection
+* 82567LF Gigabit Network Connection
+* 82567V Gigabit Network Connection
+* 82567LM-2 Gigabit Network Connection
+* 82567LF-2 Gigabit Network Connection
+* 82567V-2 Gigabit Network Connection
+* 82567LF-3 Gigabit Network Connection
+* 82567LM-3 Gigabit Network Connection
+* 82567LM-4 Gigabit Network Connection
+* 82577LM Gigabit Network Connection
+* 82577LC Gigabit Network Connection
+* 82578DM Gigabit Network Connection
+* 82578DC Gigabit Network Connection
+* 82579LM Gigabit Network Connection
+* 82579V Gigabit Network Connection
+*/
+#include "e1000-3.6-ethercat.h"
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	500
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	500
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	3000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+#define E1000_ICH_FWSM_RSPCIPHY	0x00000040 /* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID		0x00008000
+#define E1000_ICH_MNG_IAMT_MODE		0x2
+#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_DEF1_OFF2 <<  8) | \
+				 (ID_LED_DEF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+#define E1000_ICH_NVM_SIG_WORD		0x13
+#define E1000_ICH_NVM_SIG_MASK		0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK    0xC0
+#define E1000_ICH_NVM_SIG_VALUE         0x80
+#define E1000_ICH8_LAN_INIT_TIMEOUT	1500
+#define E1000_FEXTNVM_SW_CONFIG		1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK    0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC  0x08000000
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK    0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC   0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC  0x3
+#define PCIE_ICH8_SNOOP_ALL		PCIE_NO_SNOOP_ALL
+#define E1000_ICH_RAR_ENTRIES		7
+#define E1000_PCH2_RAR_ENTRIES		5 /* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES	12 /* RAR[0], SHRA[0-10] */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+			   ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG  PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL    PHY_REG(776, 18) /* Voltage Regulator Control */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS	0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN	0x0200
+#define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
+#define SW_FLAG_TIMEOUT    1000 /* SW Semaphore flag timeout in milliseconds */
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL		PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS	0x0001
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR            PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK       0x007F
+#define HV_SMB_ADDR_PEC_EN     0x0200
+#define HV_SMB_ADDR_VALID      0x0080
+#define HV_SMB_ADDR_FREQ_MASK           0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT      8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT     12
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
+/* EMI Registers */
+#define I82579_EMI_ADDR         0x10
+#define I82579_EMI_DATA         0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805	/* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD    0x084F	/* Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN    0x2411	/* MSE count before dropping link */
+#define I217_EEE_ADVERTISEMENT  0x8001	/* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY     0x8002	/* IEEE MMD Register 7.61 */
+#define I217_EEE_100_SUPPORTED  (1 << 1)	/* 100BaseTx EEE supported */
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL                 BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE    0x0080
+#define I217_SxCTRL                     PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_ENABLE_LPI_RESET    0x1000
+#define I217_CGFREG                     PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET    0x0002
+#define I217_MEMPWR                     PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010
+/* Strapping Option Register - RO */
+#define E1000_STRAP                     0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+#define E1000_STRAP_SMT_FREQ_MASK       0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT      12
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS            PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU       0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS    0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL      PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW      0x0400
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA                  PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK    0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT   12
+/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+	struct ich8_hsfsts {
+		u16 flcdone    :1; /* bit 0 Flash Cycle Done */
+		u16 flcerr     :1; /* bit 1 Flash Cycle Error */
+		u16 dael       :1; /* bit 2 Direct Access error Log */
+		u16 berasesz   :2; /* bit 4:3 Sector Erase Size */
+		u16 flcinprog  :1; /* bit 5 flash cycle in Progress */
+		u16 reserved1  :2; /* bit 13:6 Reserved */
+		u16 reserved2  :6; /* bit 13:6 Reserved */
+		u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+		u16 flockdn    :1; /* bit 15 Flash Config Lock-Down */
+	} hsf_status;
+	u16 regval;
+};
+/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+	struct ich8_hsflctl {
+		u16 flcgo      :1;   /* 0 Flash Cycle Go */
+		u16 flcycle    :2;   /* 2:1 Flash Cycle */
+		u16 reserved   :5;   /* 7:3 Reserved  */
+		u16 fldbcount  :2;   /* 9:8 Flash Data Byte Count */
+		u16 flockdn    :6;   /* 15:10 Reserved */
+	} hsf_ctrl;
+	u16 regval;
+};
+/* ICH Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+	struct ich8_flracc {
+		u32 grra      :8; /* 0:7 GbE region Read Access */
+		u32 grwa      :8; /* 8:15 GbE region Write Access */
+		u32 gmrag     :8; /* 23:16 GbE Master Read Access Grant */
+		u32 gmwag     :8; /* 31:24 GbE Master Write Access Grant */
+	} hsf_flregacc;
+	u16 regval;
+};
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+	struct ich8_pr {
+		u32 base:13;     /* 0:12 Protected Range Base */
+		u32 reserved1:2; /* 13:14 Reserved */
+		u32 rpe:1;       /* 15 Read Protection Enable */
+		u32 limit:13;    /* 16:28 Protected Range Limit */
+		u32 reserved2:2; /* 29:30 Reserved */
+		u32 wpe:1;       /* 31 Write Protection Enable */
+	} range;
+	u32 regval;
+};
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+						u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data);
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u16 *data);
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 size, u16 *data);
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
+static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readw(hw->flash_address + reg);
+}
+static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
+	return readl(hw->flash_address + reg);
+}
+static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
+{
+	writew(val, hw->flash_address + reg);
+}
+static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+	writel(val, hw->flash_address + reg);
+}
+#define er16flash(reg)		__er16flash(hw, (reg))
+#define er32flash(reg)		__er32flash(hw, (reg))
+#define ew16flash(reg, val)	__ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val)	__ew32flash(hw, (reg), (val))
+/**
+*  e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
+*  @hw: pointer to the HW structure
+*
+*  Test access to the PHY registers by reading the PHY ID registers.  If
+*  the PHY ID is already known (e.g. resume path) compare it with known ID,
+*  otherwise assume the read PHY ID is correct if it is valid.
+*
+*  Assumes the sw/fw/hw semaphore is already acquired.
+**/
+static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
+{
+	u16 phy_reg = 0;
+	u32 phy_id = 0;
+	s32 ret_val;
+	u16 retry_count;
+	for (retry_count = 0; retry_count < 2; retry_count++) {
+		ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
+		if (ret_val || (phy_reg == 0xFFFF))
+			continue;
+		phy_id = (u32)(phy_reg << 16);
+		ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
+		if (ret_val || (phy_reg == 0xFFFF)) {
+			phy_id = 0;
+			continue;
+		}
+		phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+		break;
+	}
+	if (hw->phy.id) {
+		if (hw->phy.id == phy_id)
+			return true;
+	} else if (phy_id) {
+		hw->phy.id = phy_id;
+		hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
+		return true;
+	}
+	/*
+	 * In case the PHY needs to be in mdio slow mode,
+	 * set slow mode and try to get the PHY id again.
+	 */
+	hw->phy.ops.release(hw);
+	ret_val = e1000_set_mdio_slow_mode_hv(hw);
+	if (!ret_val)
+		ret_val = e1000e_get_phy_id(hw);
+	hw->phy.ops.acquire(hw);
+	return !ret_val;
+}
+/**
+*  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
+*  @hw: pointer to the HW structure
+*
+*  Workarounds/flow necessary for PHY initialization during driver load
+*  and resume paths.
+**/
+static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
+{
+	u32 mac_reg, fwsm = er32(FWSM);
+	s32 ret_val;
+	u16 phy_reg;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val) {
+		e_dbg("Failed to initialize PHY flow\n");
+		return ret_val;
+	}
+	/*
+	 * The MAC-PHY interconnect may be in SMBus mode.  If the PHY is
+	 * inaccessible and resetting the PHY is not blocked, toggle the
+	 * LANPHYPC Value bit to force the interconnect to PCIe mode.
+	 */
+	switch (hw->mac.type) {
+	case e1000_pch_lpt:
+		if (e1000_phy_is_accessible_pchlan(hw))
+			break;
+		/*
+		 * Before toggling LANPHYPC, see if PHY is accessible by
+		 * forcing MAC to SMBus mode first.
+		 */
+		mac_reg = er32(CTRL_EXT);
+		mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+		ew32(CTRL_EXT, mac_reg);
+		/* fall-through */
+	case e1000_pch2lan:
+		/*
+		 * Gate automatic PHY configuration by hardware on
+		 * non-managed 82579
+		 */
+		if ((hw->mac.type == e1000_pch2lan) &&
+		    !(fwsm & E1000_ICH_FWSM_FW_VALID))
+			e1000_gate_hw_phy_config_ich8lan(hw, true);
+		if (e1000_phy_is_accessible_pchlan(hw)) {
+			if (hw->mac.type == e1000_pch_lpt) {
+				/* Unforce SMBus mode in PHY */
+				e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
+				phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+				e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
+				/* Unforce SMBus mode in MAC */
+				mac_reg = er32(CTRL_EXT);
+				mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+				ew32(CTRL_EXT, mac_reg);
+			}
+			break;
+		}
+		/* fall-through */
+	case e1000_pchlan:
+		if ((hw->mac.type == e1000_pchlan) &&
+		    (fwsm & E1000_ICH_FWSM_FW_VALID))
+			break;
+		if (hw->phy.ops.check_reset_block(hw)) {
+			e_dbg("Required LANPHYPC toggle blocked by ME\n");
+			break;
+		}
+		e_dbg("Toggling LANPHYPC\n");
+		/* Set Phy Config Counter to 50msec */
+		mac_reg = er32(FEXTNVM3);
+		mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+		mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+		ew32(FEXTNVM3, mac_reg);
+		/* Toggle LANPHYPC Value bit */
+		mac_reg = er32(CTRL);
+		mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+		mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+		ew32(CTRL, mac_reg);
+		e1e_flush();
+		udelay(10);
+		mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+		ew32(CTRL, mac_reg);
+		e1e_flush();
+		if (hw->mac.type < e1000_pch_lpt) {
+			msleep(50);
+		} else {
+			u16 count = 20;
+			do {
+				usleep_range(5000, 10000);
+			} while (!(er32(CTRL_EXT) &
+				   E1000_CTRL_EXT_LPCD) && count--);
+		}
+		break;
+	default:
+		break;
+	}
+	hw->phy.ops.release(hw);
+	/*
+	 * Reset the PHY before any access to it.  Doing so, ensures
+	 * that the PHY is in a known good state before we read/write
+	 * PHY registers.  The generic reset is sufficient here,
+	 * because we haven't determined the PHY type yet.
+	 */
+	ret_val = e1000e_phy_hw_reset_generic(hw);
+	/* Ungate automatic PHY configuration on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+		usleep_range(10000, 20000);
+		e1000_gate_hw_phy_config_ich8lan(hw, false);
+	}
+	return ret_val;
+}
+/**
+*  e1000_init_phy_params_pchlan - Initialize PHY function pointers
+*  @hw: pointer to the HW structure
+*
+*  Initialize family-specific PHY parameters and function pointers.
+**/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+	phy->addr                     = 1;
+	phy->reset_delay_us           = 100;
+	phy->ops.set_page             = e1000_set_page_igp;
+	phy->ops.read_reg             = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg_page        = e1000_read_phy_reg_page_hv;
+	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
+	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
+	phy->ops.write_reg            = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg_page       = e1000_write_phy_reg_page_hv;
+	phy->ops.power_up             = e1000_power_up_phy_copper;
+	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
+	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+	phy->id = e1000_phy_unknown;
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
+	if (ret_val)
+		return ret_val;
+	if (phy->id == e1000_phy_unknown)
+		switch (hw->mac.type) {
+		default:
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
+			if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+				break;
+			/* fall-through */
+		case e1000_pch2lan:
+		case e1000_pch_lpt:
+			/*
+			 * In case the PHY needs to be in mdio slow mode,
+			 * set slow mode and try to get the PHY id again.
+			 */
+			ret_val = e1000_set_mdio_slow_mode_hv(hw);
+			if (ret_val)
+				return ret_val;
+			ret_val = e1000e_get_phy_id(hw);
+			if (ret_val)
+				return ret_val;
+			break;
+		}
+	phy->type = e1000e_get_phy_type_from_id(phy->id);
+	switch (phy->type) {
+	case e1000_phy_82577:
+	case e1000_phy_82579:
+	case e1000_phy_i217:
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+		    e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		break;
+	case e1000_phy_82578:
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
+	}
+	return ret_val;
+}
+/**
+*  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
+*  @hw: pointer to the HW structure
+*
+*  Initialize family-specific PHY parameters and function pointers.
+**/
+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 i = 0;
+	phy->addr			= 1;
+	phy->reset_delay_us		= 100;
+	phy->ops.power_up               = e1000_power_up_phy_copper;
+	phy->ops.power_down             = e1000_power_down_phy_copper_ich8lan;
+	/*
+	 * We may need to do this twice - once for IGP and if that fails,
+	 * we'll set BM func pointers and try again
+	 */
+	ret_val = e1000e_determine_phy_address(hw);
+	if (ret_val) {
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.read_reg  = e1000e_read_phy_reg_bm;
+		ret_val = e1000e_determine_phy_address(hw);
+		if (ret_val) {
+			e_dbg("Cannot determine PHY addr. Erroring out\n");
+			return ret_val;
+		}
+	}
+	phy->id = 0;
+	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
+	       (i++ < 100)) {
+		usleep_range(1000, 2000);
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	/* Verify phy id */
+	switch (phy->id) {
+	case IGP03E1000_E_PHY_ID:
+		phy->type = e1000_phy_igp_3;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.get_info = e1000e_get_phy_info_igp;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
+		break;
+	case IFE_E_PHY_ID:
+	case IFE_PLUS_E_PHY_ID:
+	case IFE_C_E_PHY_ID:
+		phy->type = e1000_phy_ife;
+		phy->autoneg_mask = E1000_ALL_NOT_GIG;
+		phy->ops.get_info = e1000_get_phy_info_ife;
+		phy->ops.check_polarity = e1000_check_polarity_ife;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
+		break;
+	case BME1000_E_PHY_ID:
+		phy->type = e1000_phy_bm;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		break;
+	default:
+		return -E1000_ERR_PHY;
+		break;
+	}
+	return 0;
+}
+/**
+*  e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
+*  @hw: pointer to the HW structure
+*
+*  Initialize family-specific NVM parameters and function
+*  pointers.
+**/
+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 gfpreg, sector_base_addr, sector_end_addr;
+	u16 i;
+	/* Can't read flash registers if the register set isn't mapped. */
+	if (!hw->flash_address) {
+		e_dbg("ERROR: Flash registers not mapped\n");
+		return -E1000_ERR_CONFIG;
+	}
+	nvm->type = e1000_nvm_flash_sw;
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+	/*
+	 * sector_X_addr is a "sector"-aligned address (4096 bytes)
+	 * Add 1 to sector_end_addr since this sector is included in
+	 * the overall size.
+	 */
+	sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
+	sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+	/* flash_base_addr is byte-aligned */
+	nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
+	/*
+	 * find total size of the NVM, then cut in half since the total
+	 * size represents two separate NVM banks.
+	 */
+	nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
+				<< FLASH_SECTOR_ADDR_SHIFT;
+	nvm->flash_bank_size /= 2;
+	/* Adjust to word count */
+	nvm->flash_bank_size /= sizeof(u16);
+	nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
+	/* Clear shadow ram */
+	for (i = 0; i < nvm->word_size; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value    = 0xFFFF;
+	}
+	return 0;
+}
+/**
+*  e1000_init_mac_params_ich8lan - Initialize MAC function pointers
+*  @hw: pointer to the HW structure
+*
+*  Initialize family-specific MAC parameters and function
+*  pointers.
+**/
+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	/* Set media type function pointer */
+	hw->phy.media_type = e1000_media_type_copper;
+	/* Set mta register count */
+	mac->mta_reg_count = 32;
+	/* Set rar entry count */
+	mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
+	if (mac->type == e1000_ich8lan)
+		mac->rar_entry_count--;
+	/* FWSM register */
+	mac->has_fwsm = true;
+	/* ARC subsystem not supported */
+	mac->arc_subsystem_valid = false;
+	/* Adaptive IFS supported */
+	mac->adaptive_ifs = true;
+	/* LED and other operations */
+	switch (mac->type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000e_id_led_init_generic;
+		/* blink LED */
+		mac->ops.blink_led = e1000e_blink_led_generic;
+		/* setup LED */
+		mac->ops.setup_led = e1000e_setup_led_generic;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_ich8lan;
+		mac->ops.led_off = e1000_led_off_ich8lan;
+		break;
+	case e1000_pch2lan:
+		mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
+		mac->ops.rar_set = e1000_rar_set_pch2lan;
+		/* fall-through */
+	case e1000_pch_lpt:
+	case e1000_pchlan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
+		/* ID LED init */
+		mac->ops.id_led_init = e1000_id_led_init_pchlan;
+		/* setup LED */
+		mac->ops.setup_led = e1000_setup_led_pchlan;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_pchlan;
+		mac->ops.led_off = e1000_led_off_pchlan;
+		break;
+	default:
+		break;
+	}
+	if (mac->type == e1000_pch_lpt) {
+		mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
+		mac->ops.rar_set = e1000_rar_set_pch_lpt;
+	}
+	/* Enable PCS Lock-loss workaround for ICH8 */
+	if (mac->type == e1000_ich8lan)
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+	/*
+	 * Gate automatic PHY configuration by hardware on managed
+	 * 82579 and i217
+	 */
+	if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) &&
+	    (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		e1000_gate_hw_phy_config_ich8lan(hw, true);
+	return 0;
+}
+/**
+*  e1000_set_eee_pchlan - Enable/disable EEE support
+*  @hw: pointer to the HW structure
+*
+*  Enable/disable EEE based on setting in dev_spec structure.  The bits in
+*  the LPI Control register will remain set only if/when link is up.
+**/
+static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	s32 ret_val = 0;
+	u16 phy_reg;
+	if ((hw->phy.type != e1000_phy_82579) &&
+	    (hw->phy.type != e1000_phy_i217))
+		return 0;
+	ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+	if (ret_val)
+		return ret_val;
+	if (dev_spec->eee_disable)
+		phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
+	else
+		phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
+	ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+	if (ret_val)
+		return ret_val;
+	if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) {
+		/* Save off link partner's EEE ability */
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
+					  I217_EEE_LP_ABILITY);
+		if (ret_val)
+			goto release;
+		e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability);
+		/*
+		 * EEE is not supported in 100Half, so ignore partner's EEE
+		 * in 100 ability if full-duplex is not advertised.
+		 */
+		e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg);
+		if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS))
+			dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED;
+release:
+		hw->phy.ops.release(hw);
+	}
+	return 0;
+}
+/**
+*  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+*  @hw: pointer to the HW structure
+*
+*  Checks to see of the link status of the hardware has changed.  If a
+*  change in link status has been detected, then we read the PHY registers
+*  to get the current speed/duplex if link exists.
+**/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+	u16 phy_reg;
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status)
+		return 0;
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		return ret_val;
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_k1_gig_workaround_hv(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+	/* Clear link partner's EEE ability */
+	hw->dev_spec.ich8lan.eee_lp_ability = 0;
+	if (!link)
+		return 0; /* No link detected */
+	mac->get_link_status = false;
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+		ret_val = e1000_k1_workaround_lv(hw);
+		if (ret_val)
+			return ret_val;
+		/* fall-thru */
+	case e1000_pchlan:
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = e1000_link_stall_workaround_hv(hw);
+			if (ret_val)
+				return ret_val;
+		}
+		/*
+		 * Workaround for PCHx parts in half-duplex:
+		 * Set the number of preambles removed from the packet
+		 * when it is passed from the PHY to the MAC to prevent
+		 * the MAC from misinterpreting the packet type.
+		 */
+		e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg);
+		phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK;
+		if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD)
+			phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT);
+		e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg);
+		break;
+	default:
+		break;
+	}
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+	/* Enable/Disable EEE after link up */
+	ret_val = e1000_set_eee_pchlan(hw);
+	if (ret_val)
+		return ret_val;
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg)
+		return -E1000_ERR_CONFIG;
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	mac->ops.config_collision_dist(hw);
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		e_dbg("Error configuring flow control\n");
+	return ret_val;
+}
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 rc;
+	rc = e1000_init_mac_params_ich8lan(hw);
+	if (rc)
+		return rc;
+	rc = e1000_init_nvm_params_ich8lan(hw);
+	if (rc)
+		return rc;
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		rc = e1000_init_phy_params_ich8lan(hw);
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+		rc = e1000_init_phy_params_pchlan(hw);
+		break;
+	default:
+		break;
+	}
+	if (rc)
+		return rc;
+	/*
+	 * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
+	 * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
+	 */
+	if ((adapter->hw.phy.type == e1000_phy_ife) ||
+	    ((adapter->hw.mac.type >= e1000_pch2lan) &&
+	     (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
+		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+		hw->mac.ops.blink_led = NULL;
+	}
+	if ((adapter->hw.mac.type == e1000_ich8lan) &&
+	    (adapter->hw.phy.type != e1000_phy_ife))
+		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+	/* Enable workaround for 82579 w/ ME enabled */
+	if ((adapter->hw.mac.type == e1000_pch2lan) &&
+	    (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+	/* Disable EEE by default until IEEE802.3az spec is finalized */
+	if (adapter->flags2 & FLAG2_HAS_EEE)
+		adapter->hw.dev_spec.ich8lan.eee_disable = true;
+	return 0;
+}
+static DEFINE_MUTEX(nvm_mutex);
+/**
+*  e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+*  @hw: pointer to the HW structure
+*
+*  Acquires the mutex for performing NVM operations.
+**/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_lock(&nvm_mutex);
+	return 0;
+}
+/**
+*  e1000_release_nvm_ich8lan - Release NVM mutex
+*  @hw: pointer to the HW structure
+*
+*  Releases the mutex used while performing NVM operations.
+**/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+	mutex_unlock(&nvm_mutex);
+}
+/**
+*  e1000_acquire_swflag_ich8lan - Acquire software control flag
+*  @hw: pointer to the HW structure
+*
+*  Acquires the software control flag for performing PHY and select
+*  MAC CSR accesses.
+**/
+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+	s32 ret_val = 0;
+	if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE,
+			     &hw->adapter->state)) {
+		e_dbg("contention for Phy access\n");
+		return -E1000_ERR_PHY;
+	}
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+			break;
+		mdelay(1);
+		timeout--;
+	}
+	if (!timeout) {
+		e_dbg("SW has already locked the resource.\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+	timeout = SW_FLAG_TIMEOUT;
+	extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+	while (timeout) {
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+			break;
+		mdelay(1);
+		timeout--;
+	}
+	if (!timeout) {
+		e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
+		      er32(FWSM), extcnf_ctrl);
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+out:
+	if (ret_val)
+		clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+	return ret_val;
+}
+/**
+*  e1000_release_swflag_ich8lan - Release software control flag
+*  @hw: pointer to the HW structure
+*
+*  Releases the software control flag for performing PHY and select
+*  MAC CSR accesses.
+**/
+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+	} else {
+		e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
+	}
+	clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+}
+/**
+*  e1000_check_mng_mode_ich8lan - Checks management mode
+*  @hw: pointer to the HW structure
+*
+*  This checks if the adapter has any manageability enabled.
+*  This is a function pointer entry point only called by read/write
+*  routines for the PHY and NVM parts.
+**/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       ((fwsm & E1000_FWSM_MODE_MASK) ==
+		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+/**
+*  e1000_check_mng_mode_pchlan - Checks management mode
+*  @hw: pointer to the HW structure
+*
+*  This checks if the adapter has iAMT enabled.
+*  This is a function pointer entry point only called by read/write
+*  routines for the PHY and NVM parts.
+**/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+/**
+*  e1000_rar_set_pch2lan - Set receive address register
+*  @hw: pointer to the HW structure
+*  @addr: pointer to the receive address
+*  @index: receive address array register
+*
+*  Sets the receive address array register at index to the address passed
+*  in by addr.  For 82579, RAR[0] is the base address register that is to
+*  contain the MAC address but RAR[1-6] are reserved for manageability (ME).
+*  Use SHRA[0-3] in place of those reserved for ME.
+**/
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+	/*
+	 * HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+	if (index == 0) {
+		ew32(RAL(index), rar_low);
+		e1e_flush();
+		ew32(RAH(index), rar_high);
+		e1e_flush();
+		return;
+	}
+	if (index < hw->mac.rar_entry_count) {
+		s32 ret_val;
+		ret_val = e1000_acquire_swflag_ich8lan(hw);
+		if (ret_val)
+			goto out;
+		ew32(SHRAL(index - 1), rar_low);
+		e1e_flush();
+		ew32(SHRAH(index - 1), rar_high);
+		e1e_flush();
+		e1000_release_swflag_ich8lan(hw);
+		/* verify the register updates */
+		if ((er32(SHRAL(index - 1)) == rar_low) &&
+		    (er32(SHRAH(index - 1)) == rar_high))
+			return;
+		e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n",
+		      (index - 1), er32(FWSM));
+	}
+out:
+	e_dbg("Failed to write receive address at index %d\n", index);
+}
+/**
+*  e1000_rar_set_pch_lpt - Set receive address registers
+*  @hw: pointer to the HW structure
+*  @addr: pointer to the receive address
+*  @index: receive address array register
+*
+*  Sets the receive address register array at index to the address passed
+*  in by addr. For LPT, RAR[0] is the base address register that is to
+*  contain the MAC address. SHRA[0-10] are the shared receive address
+*  registers that are shared between the Host and manageability engine (ME).
+**/
+static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+	u32 rar_low, rar_high;
+	u32 wlock_mac;
+	/*
+	 * HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+	rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+	/* If MAC address zero, no need to set the AV bit */
+	if (rar_low || rar_high)
+		rar_high |= E1000_RAH_AV;
+	if (index == 0) {
+		ew32(RAL(index), rar_low);
+		e1e_flush();
+		ew32(RAH(index), rar_high);
+		e1e_flush();
+		return;
+	}
+	/*
+	 * The manageability engine (ME) can lock certain SHRAR registers that
+	 * it is using - those registers are unavailable for use.
+	 */
+	if (index < hw->mac.rar_entry_count) {
+		wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
+		wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;
+		/* Check if all SHRAR registers are locked */
+		if (wlock_mac == 1)
+			goto out;
+		if ((wlock_mac == 0) || (index <= wlock_mac)) {
+			s32 ret_val;
+			ret_val = e1000_acquire_swflag_ich8lan(hw);
+			if (ret_val)
+				goto out;
+			ew32(SHRAL_PCH_LPT(index - 1), rar_low);
+			e1e_flush();
+			ew32(SHRAH_PCH_LPT(index - 1), rar_high);
+			e1e_flush();
+			e1000_release_swflag_ich8lan(hw);
+			/* verify the register updates */
+			if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) &&
+			    (er32(SHRAH_PCH_LPT(index - 1)) == rar_high))
+				return;
+		}
+	}
+out:
+	e_dbg("Failed to write receive address at index %d\n", index);
+}
+/**
+*  e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
+*  @hw: pointer to the HW structure
+*
+*  Checks if firmware is blocking the reset of the PHY.
+*  This is a function pointer entry point only called by
+*  reset routines.
+**/
+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
+}
+/**
+*  e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
+*  @hw: pointer to the HW structure
+*
+*  Assumes semaphore already acquired.
+*
+**/
+static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
+{
+	u16 phy_data;
+	u32 strap = er32(STRAP);
+	u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
+	    E1000_STRAP_SMT_FREQ_SHIFT;
+	s32 ret_val = 0;
+	strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~HV_SMB_ADDR_MASK;
+	phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
+	phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+	if (hw->phy.type == e1000_phy_i217) {
+		/* Restore SMBus frequency */
+		if (freq--) {
+			phy_data &= ~HV_SMB_ADDR_FREQ_MASK;
+			phy_data |= (freq & (1 << 0)) <<
+			    HV_SMB_ADDR_FREQ_LOW_SHIFT;
+			phy_data |= (freq & (1 << 1)) <<
+			    (HV_SMB_ADDR_FREQ_HIGH_SHIFT - 1);
+		} else {
+			e_dbg("Unsupported SMB frequency in PHY\n");
+		}
+	}
+	return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
+}
+/**
+*  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+*  @hw:   pointer to the HW structure
+*
+*  SW should configure the LCD from the NVM extended configuration region
+*  as a workaround for certain parts.
+**/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+	s32 ret_val = 0;
+	u16 word_addr, reg_data, reg_addr, phy_page = 0;
+	/*
+	 * Initialize the PHY from the NVM on ICH platforms.  This
+	 * is needed due to an issue where the NVM configuration is
+	 * not properly autoloaded after power transitions.
+	 * Therefore, after each PHY reset, we will load the
+	 * configuration data out of the NVM manually.
+	 */
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+		if (phy->type != e1000_phy_igp_3)
+			return ret_val;
+		if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+		    (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+			break;
+		}
+		/* Fall-thru */
+	case e1000_pchlan:
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+		break;
+	default:
+		return ret_val;
+	}
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	data = er32(FEXTNVM);
+	if (!(data & sw_cfg_mask))
+		goto release;
+	/*
+	 * Make sure HW does not configure LCD from PHY
+	 * extended configuration before SW configuration
+	 */
+	data = er32(EXTCNF_CTRL);
+	if ((hw->mac.type < e1000_pch2lan) &&
+	    (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE))
+		goto release;
+	cnf_size = er32(EXTCNF_SIZE);
+	cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+	cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+	if (!cnf_size)
+		goto release;
+	cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+	cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+	if (((hw->mac.type == e1000_pchlan) &&
+	     !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) ||
+	    (hw->mac.type > e1000_pchlan)) {
+		/*
+		 * HW configures the SMBus address and LEDs when the
+		 * OEM and LCD Write Enable bits are set in the NVM.
+		 * When both NVM bits are cleared, SW will configure
+		 * them instead.
+		 */
+		ret_val = e1000_write_smbus_addr(hw);
+		if (ret_val)
+			goto release;
+		data = er32(LEDCTL);
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
+							(u16)data);
+		if (ret_val)
+			goto release;
+	}
+	/* Configure LCD from extended configuration region. */
+	/* cnf_base_addr is in DWORD */
+	word_addr = (u16)(cnf_base_addr << 1);
+	for (i = 0; i < cnf_size; i++) {
+		ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+					 &reg_data);
+		if (ret_val)
+			goto release;
+		ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+					 1, &reg_addr);
+		if (ret_val)
+			goto release;
+		/* Save off the PHY page for future writes. */
+		if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+			phy_page = reg_data;
+			continue;
+		}
+		reg_addr &= PHY_REG_MASK;
+		reg_addr |= phy_page;
+		ret_val = e1e_wphy_locked(hw, (u32)reg_addr, reg_data);
+		if (ret_val)
+			goto release;
+	}
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+/**
+*  e1000_k1_gig_workaround_hv - K1 Si workaround
+*  @hw:   pointer to the HW structure
+*  @link: link up bool flag
+*
+*  If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+*  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
+*  If link is down, the function will restore the default K1 setting located
+*  in the NVM.
+**/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+	s32 ret_val = 0;
+	u16 status_reg = 0;
+	bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+	if (hw->mac.type != e1000_pchlan)
+		return 0;
+	/* Wrap the whole flow with the sw flag */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+	if (link) {
+		if (hw->phy.type == e1000_phy_82578) {
+			ret_val = e1e_rphy_locked(hw, BM_CS_STATUS,
+						  &status_reg);
+			if (ret_val)
+				goto release;
+			status_reg &= BM_CS_STATUS_LINK_UP |
+			              BM_CS_STATUS_RESOLVED |
+			              BM_CS_STATUS_SPEED_MASK;
+			if (status_reg == (BM_CS_STATUS_LINK_UP |
+			                   BM_CS_STATUS_RESOLVED |
+			                   BM_CS_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+		if (hw->phy.type == e1000_phy_82577) {
+			ret_val = e1e_rphy_locked(hw, HV_M_STATUS, &status_reg);
+			if (ret_val)
+				goto release;
+			status_reg &= HV_M_STATUS_LINK_UP |
+			              HV_M_STATUS_AUTONEG_COMPLETE |
+			              HV_M_STATUS_SPEED_MASK;
+			if (status_reg == (HV_M_STATUS_LINK_UP |
+			                   HV_M_STATUS_AUTONEG_COMPLETE |
+			                   HV_M_STATUS_SPEED_1000))
+				k1_enable = false;
+		}
+		/* Link stall fix for link up */
+		ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x0100);
+		if (ret_val)
+			goto release;
+	} else {
+		/* Link stall fix for link down */
+		ret_val = e1e_wphy_locked(hw, PHY_REG(770, 19), 0x4100);
+		if (ret_val)
+			goto release;
+	}
+	ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+/**
+*  e1000_configure_k1_ich8lan - Configure K1 power state
+*  @hw: pointer to the HW structure
+*  @enable: K1 state to configure
+*
+*  Configure the K1 power state based on the provided parameter.
+*  Assumes semaphore already acquired.
+*
+*  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+**/
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+	s32 ret_val = 0;
+	u32 ctrl_reg = 0;
+	u32 ctrl_ext = 0;
+	u32 reg = 0;
+	u16 kmrn_reg = 0;
+	ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					      &kmrn_reg);
+	if (ret_val)
+		return ret_val;
+	if (k1_enable)
+		kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+	else
+		kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+	ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					       kmrn_reg);
+	if (ret_val)
+		return ret_val;
+	udelay(20);
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_reg = er32(CTRL);
+	reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+	reg |= E1000_CTRL_FRCSPD;
+	ew32(CTRL, reg);
+	ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+	e1e_flush();
+	udelay(20);
+	ew32(CTRL, ctrl_reg);
+	ew32(CTRL_EXT, ctrl_ext);
+	e1e_flush();
+	udelay(20);
+	return 0;
+}
+/**
+*  e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+*  @hw:       pointer to the HW structure
+*  @d0_state: boolean if entering d0 or d3 device state
+*
+*  SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+*  collectively called OEM bits.  The OEM Write Enable bit and SW Config bit
+*  in NVM determines whether HW should configure LPLU and Gbe Disable.
+**/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+	s32 ret_val = 0;
+	u32 mac_reg;
+	u16 oem_reg;
+	if (hw->mac.type < e1000_pchlan)
+		return ret_val;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	if (hw->mac.type == e1000_pchlan) {
+		mac_reg = er32(EXTCNF_CTRL);
+		if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+			goto release;
+	}
+	mac_reg = er32(FEXTNVM);
+	if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+		goto release;
+	mac_reg = er32(PHY_CTRL);
+	ret_val = e1e_rphy_locked(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		goto release;
+	oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+	if (d0_state) {
+		if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+		if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+			oem_reg |= HV_OEM_BITS_LPLU;
+	} else {
+		if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
+			       E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
+			oem_reg |= HV_OEM_BITS_GBE_DIS;
+		if (mac_reg & (E1000_PHY_CTRL_D0A_LPLU |
+			       E1000_PHY_CTRL_NOND0A_LPLU))
+			oem_reg |= HV_OEM_BITS_LPLU;
+	}
+	/* Set Restart auto-neg to activate the bits */
+	if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
+	    !hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+	ret_val = e1e_wphy_locked(hw, HV_OEM_BITS, oem_reg);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+/**
+*  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+*  @hw:   pointer to the HW structure
+**/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+	ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+	data |= HV_KMRN_MDIO_SLOW;
+	ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+	return ret_val;
+}
+/**
+*  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+*  done after every PHY reset.
+**/
+static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 phy_data;
+	if (hw->mac.type != e1000_pchlan)
+		return 0;
+	/* Set MDIO slow mode before any other MDIO access */
+	if (hw->phy.type == e1000_phy_82577) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	if (((hw->phy.type == e1000_phy_82577) &&
+	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
+	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
+		/* Disable generation of early preamble */
+		ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
+		if (ret_val)
+			return ret_val;
+		/* Preamble tuning for SSC */
+		ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204);
+		if (ret_val)
+			return ret_val;
+	}
+	if (hw->phy.type == e1000_phy_82578) {
+		/*
+		 * Return registers to default by doing a soft reset then
+		 * writing 0x3140 to the control register.
+		 */
+		if (hw->phy.revision < 2) {
+			e1000e_phy_sw_reset(hw);
+			ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140);
+		}
+	}
+	/* Select page 0 */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	hw->phy.addr = 1;
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		return ret_val;
+	/*
+	 * Configure the K1 Si workaround during phy reset assuming there is
+	 * link so that it disables K1 if link is in 1Gbps.
+	 */
+	ret_val = e1000_k1_gig_workaround_hv(hw, true);
+	if (ret_val)
+		return ret_val;
+	/* Workaround for link disconnects on a busy hub in half duplex */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1e_rphy_locked(hw, BM_PORT_GEN_CFG, &phy_data);
+	if (ret_val)
+		goto release;
+	ret_val = e1e_wphy_locked(hw, BM_PORT_GEN_CFG, phy_data & 0x00FF);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+/**
+*  e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+*  @hw:   pointer to the HW structure
+**/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+	u16 i, phy_reg = 0;
+	s32 ret_val;
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return;
+	ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+	if (ret_val)
+		goto release;
+	/* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+	for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+		mac_reg = er32(RAL(i));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
+					   (u16)((mac_reg >> 16) & 0xFFFF));
+		mac_reg = er32(RAH(i));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
+					   (u16)((mac_reg & E1000_RAH_AV)
+						 >> 16));
+	}
+	e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+release:
+	hw->phy.ops.release(hw);
+}
+/**
+*  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+*  with 82579 PHY
+*  @hw: pointer to the HW structure
+*  @enable: flag to enable/disable workaround when enabling/disabling jumbos
+**/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+	s32 ret_val = 0;
+	u16 phy_reg, data;
+	u32 mac_reg;
+	u16 i;
+	if (hw->mac.type < e1000_pch2lan)
+		return 0;
+	/* disable Rx path while enabling/disabling workaround */
+	e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+	if (ret_val)
+		return ret_val;
+	if (enable) {
+		/*
+		 * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+		 * SHRAL/H) and initial CRC values to the MAC
+		 */
+		for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+			u8 mac_addr[ETH_ALEN] = {0};
+			u32 addr_high, addr_low;
+			addr_high = er32(RAH(i));
+			if (!(addr_high & E1000_RAH_AV))
+				continue;
+			addr_low = er32(RAL(i));
+			mac_addr[0] = (addr_low & 0xFF);
+			mac_addr[1] = ((addr_low >> 8) & 0xFF);
+			mac_addr[2] = ((addr_low >> 16) & 0xFF);
+			mac_addr[3] = ((addr_low >> 24) & 0xFF);
+			mac_addr[4] = (addr_high & 0xFF);
+			mac_addr[5] = ((addr_high >> 8) & 0xFF);
+			ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
+		}
+		/* Write Rx addresses to the PHY */
+		e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+		/* Enable jumbo frame workaround in the MAC */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(1 << 14);
+		mac_reg |= (7 << 15);
+		ew32(FFLT_DBG, mac_reg);
+		mac_reg = er32(RCTL);
+		mac_reg |= E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data | (1 << 0));
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			return ret_val;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			return ret_val;
+		/* Enable jumbo frame workaround in the PHY */
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		data |= (0x37 << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x1A << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xF100);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+		if (ret_val)
+			return ret_val;
+	} else {
+		/* Write MAC register values back to h/w defaults */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(0xF << 14);
+		ew32(FFLT_DBG, mac_reg);
+		mac_reg = er32(RCTL);
+		mac_reg &= ~E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data & ~(1 << 0));
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			return ret_val;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			return ret_val;
+		/* Write PHY register values back to h/w defaults */
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data |= (1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x8 << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+		if (ret_val)
+			return ret_val;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+		if (ret_val)
+			return ret_val;
+	}
+	/* re-enable Rx path after enabling/disabling workaround */
+	return e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+}
+/**
+*  e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+*  done after every PHY reset.
+**/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	if (hw->mac.type != e1000_pch2lan)
+		return 0;
+	/* Set MDIO slow mode before any other MDIO access */
+	ret_val = e1000_set_mdio_slow_mode_hv(hw);
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD);
+	if (ret_val)
+		goto release;
+	/* set MSE higher to enable link to stay up when noise is high */
+	ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034);
+	if (ret_val)
+		goto release;
+	ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN);
+	if (ret_val)
+		goto release;
+	/* drop link after 5 times MSE threshold was reached */
+	ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005);
+release:
+	hw->phy.ops.release(hw);
+	return ret_val;
+}
+/**
+*  e1000_k1_gig_workaround_lv - K1 Si workaround
+*  @hw:   pointer to the HW structure
+*
+*  Workaround to set the K1 beacon duration for 82579 parts
+**/
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 status_reg = 0;
+	u32 mac_reg;
+	u16 phy_reg;
+	if (hw->mac.type != e1000_pch2lan)
+		return 0;
+	/* Set K1 beacon duration based on 1Gbps speed or otherwise */
+	ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
+	if (ret_val)
+		return ret_val;
+	if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
+	    == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
+		mac_reg = er32(FEXTNVM4);
+		mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
+		ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+		if (ret_val)
+			return ret_val;
+		if (status_reg & HV_M_STATUS_SPEED_1000) {
+			u16 pm_phy_reg;
+			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
+			phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+			/* LV 1G Packet drop issue wa  */
+			ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg);
+			if (ret_val)
+				return ret_val;
+			pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA;
+			ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg);
+			if (ret_val)
+				return ret_val;
+		} else {
+			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
+			phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+		}
+		ew32(FEXTNVM4, mac_reg);
+		ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+	}
+	return ret_val;
+}
+/**
+*  e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
+*  @hw:   pointer to the HW structure
+*  @gate: boolean set to true to gate, false to ungate
+*
+*  Gate/ungate the automatic PHY configuration via hardware; perform
+*  the configuration via software instead.
+**/
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
+{
+	u32 extcnf_ctrl;
+	if (hw->mac.type < e1000_pch2lan)
+		return;
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	if (gate)
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+	else
+		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+/**
+*  e1000_lan_init_done_ich8lan - Check for PHY config completion
+*  @hw: pointer to the HW structure
+*
+*  Check the appropriate indication the MAC has finished configuring the
+*  PHY after a software reset.
+**/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+	/* Wait for basic configuration completes before proceeding */
+	do {
+		data = er32(STATUS);
+		data &= E1000_STATUS_LAN_INIT_DONE;
+		udelay(100);
+	} while ((!data) && --loop);
+	/*
+	 * If basic configuration is incomplete before the above loop
+	 * count reaches 0, loading the configuration from NVM will
+	 * leave the PHY in a bad state possibly resulting in no link.
+	 */
+	if (loop == 0)
+		e_dbg("LAN_INIT_DONE not set, increase timeout\n");
+	/* Clear the Init Done bit for the next init event */
+	data = er32(STATUS);
+	data &= ~E1000_STATUS_LAN_INIT_DONE;
+	ew32(STATUS, data);
+}
+/**
+*  e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset
+*  @hw: pointer to the HW structure
+**/
+static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 reg;
+	if (hw->phy.ops.check_reset_block(hw))
+		return 0;
+	/* Allow time for h/w to get to quiescent state after reset */
+	usleep_range(10000, 20000);
+	/* Perform any necessary post-reset workarounds */
+	switch (hw->mac.type) {
+	case e1000_pchlan:
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_pch2lan:
+		ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	default:
+		break;
+	}
+	/* Clear the host wakeup bit after lcd reset */
+	if (hw->mac.type >= e1000_pchlan) {
+		e1e_rphy(hw, BM_PORT_GEN_CFG, &reg);
+		reg &= ~BM_WUC_HOST_WU_BIT;
+		e1e_wphy(hw, BM_PORT_GEN_CFG, reg);
+	}
+	/* Configure the LCD with the extended configuration region in NVM */
+	ret_val = e1000_sw_lcd_config_ich8lan(hw);
+	if (ret_val)
+		return ret_val;
+	/* Configure the LCD with the OEM bits in NVM */
+	ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+	if (hw->mac.type == e1000_pch2lan) {
+		/* Ungate automatic PHY configuration on non-managed 82579 */
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			usleep_range(10000, 20000);
+			e1000_gate_hw_phy_config_ich8lan(hw, false);
+		}
+		/* Set EEE LPI Update Timer to 200usec */
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
+					  I82579_LPI_UPDATE_TIMER);
+		if (!ret_val)
+			ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387);
+		hw->phy.ops.release(hw);
+	}
+	return ret_val;
+}
+/**
+*  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
+*  @hw: pointer to the HW structure
+*
+*  Resets the PHY
+*  This is a function pointer entry point called by drivers
+*  or other shared routines.
+**/
+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	/* Gate automatic PHY configuration by hardware on non-managed 82579 */
+	if ((hw->mac.type == e1000_pch2lan) &&
+	    !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+		e1000_gate_hw_phy_config_ich8lan(hw, true);
+	ret_val = e1000e_phy_hw_reset_generic(hw);
+	if (ret_val)
+		return ret_val;
+	return e1000_post_phy_reset_ich8lan(hw);
+}
+/**
+*  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+*  @hw: pointer to the HW structure
+*  @active: true to enable LPLU, false to disable
+*
+*  Sets the LPLU state according to the active flag.  For PCH, if OEM write
+*  bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+*  the phy speed. This function will manually set the LPLU bit and restart
+*  auto-neg as hw would do. D3 and D0 LPLU will call the same function
+*  since it configures the same bit.
+**/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+	s32 ret_val = 0;
+	u16 oem_reg;
+	ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+	if (ret_val)
+		return ret_val;
+	if (active)
+		oem_reg |= HV_OEM_BITS_LPLU;
+	else
+		oem_reg &= ~HV_OEM_BITS_LPLU;
+	if (!hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+	return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+}
+/**
+*  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
+*  @hw: pointer to the HW structure
+*  @active: true to enable LPLU, false to disable
+*
+*  Sets the LPLU D0 state according to the active flag.  When
+*  activating LPLU this function also disables smart speed
+*  and vice versa.  LPLU will not be activated unless the
+*  device autonegotiation advertisement meets standards of
+*  either 10 or 10/100 or 10/100/1000 at all duplexes.
+*  This is a function pointer entry point only called by
+*  PHY setup routines.
+**/
+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 phy_ctrl;
+	s32 ret_val = 0;
+	u16 data;
+	if (phy->type == e1000_phy_ife)
+		return 0;
+	phy_ctrl = er32(PHY_CTRL);
+	if (active) {
+		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+		/*
+		 * Call gig speed drop workaround on LPLU before accessing
+		 * any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+		if (ret_val)
+			return ret_val;
+	} else {
+		phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	}
+	return 0;
+}
+/**
+*  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
+*  @hw: pointer to the HW structure
+*  @active: true to enable LPLU, false to disable
+*
+*  Sets the LPLU D3 state according to the active flag.  When
+*  activating LPLU this function also disables smart speed
+*  and vice versa.  LPLU will not be activated unless the
+*  device autonegotiation advertisement meets standards of
+*  either 10 or 10/100 or 10/100/1000 at all duplexes.
+*  This is a function pointer entry point only called by
+*  PHY setup routines.
+**/
+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 phy_ctrl;
+	s32 ret_val = 0;
+	u16 data;
+	phy_ctrl = er32(PHY_CTRL);
+	if (!active) {
+		phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+		/*
+		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
+		 * during Dx states where the power conservation is most
+		 * important.  During driver activity we should enable
+		 * SmartSpeed, so performance is maintained.
+		 */
+		if (phy->smart_speed == e1000_smart_speed_on) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+			data |= IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		} else if (phy->smart_speed == e1000_smart_speed_off) {
+			ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   &data);
+			if (ret_val)
+				return ret_val;
+			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+			ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+					   data);
+			if (ret_val)
+				return ret_val;
+		}
+	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+		phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+		ew32(PHY_CTRL, phy_ctrl);
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+		/*
+		 * Call gig speed drop workaround on LPLU before accessing
+		 * any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+		/* When LPLU is enabled, we should disable SmartSpeed */
+		ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+		if (ret_val)
+			return ret_val;
+		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+	}
+	return ret_val;
+}
+/**
+*  e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+*  @hw: pointer to the HW structure
+*  @bank:  pointer to the variable that returns the active bank
+*
+*  Reads signature byte from the NVM using the flash access registers.
+*  Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
+**/
+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
+	u32 eecd;
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
+	u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
+	u8 sig_byte = 0;
+	s32 ret_val;
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+		eecd = er32(EECD);
+		if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
+		    E1000_EECD_SEC1VAL_VALID_MASK) {
+			if (eecd & E1000_EECD_SEC1VAL)
+				*bank = 1;
+			else
+				*bank = 0;
+			return 0;
+		}
+		e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
+		/* fall-thru */
+	default:
+		/* set bank to 0 in case flash read fails */
+		*bank = 0;
+		/* Check bank 0 */
+		ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
+		                                        &sig_byte);
+		if (ret_val)
+			return ret_val;
+		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+		    E1000_ICH_NVM_SIG_VALUE) {
+			*bank = 0;
+			return 0;
+		}
+		/* Check bank 1 */
+		ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
+		                                        bank1_offset,
+		                                        &sig_byte);
+		if (ret_val)
+			return ret_val;
+		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+		    E1000_ICH_NVM_SIG_VALUE) {
+			*bank = 1;
+			return 0;
+		}
+		e_dbg("ERROR: No valid NVM bank present\n");
+		return -E1000_ERR_NVM;
+	}
+}
+/**
+*  e1000_read_nvm_ich8lan - Read word(s) from the NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset (in bytes) of the word(s) to read.
+*  @words: Size of data to read in words
+*  @data: Pointer to the word(s) to read at offset.
+*
+*  Reads a word(s) from the NVM using the flash access registers.
+**/
+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 act_offset;
+	s32 ret_val = 0;
+	u32 bank = 0;
+	u16 i, word;
+	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		ret_val = -E1000_ERR_NVM;
+		goto out;
+	}
+	nvm->ops.acquire(hw);
+	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+	act_offset = (bank) ? nvm->flash_bank_size : 0;
+	act_offset += offset;
+	ret_val = 0;
+	for (i = 0; i < words; i++) {
+		if (dev_spec->shadow_ram[offset+i].modified) {
+			data[i] = dev_spec->shadow_ram[offset+i].value;
+		} else {
+			ret_val = e1000_read_flash_word_ich8lan(hw,
+								act_offset + i,
+								&word);
+			if (ret_val)
+				break;
+			data[i] = word;
+		}
+	}
+	nvm->ops.release(hw);
+out:
+	if (ret_val)
+		e_dbg("NVM read error: %d\n", ret_val);
+	return ret_val;
+}
+/**
+*  e1000_flash_cycle_init_ich8lan - Initialize flash
+*  @hw: pointer to the HW structure
+*
+*  This function does initial flash setup so that a new read/write/erase cycle
+*  can be started.
+**/
+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
+{
+	union ich8_hws_flash_status hsfsts;
+	s32 ret_val = -E1000_ERR_NVM;
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	/* Check if the flash descriptor is valid */
+	if (!hsfsts.hsf_status.fldesvalid) {
+		e_dbg("Flash descriptor invalid.  SW Sequencing must be used.\n");
+		return -E1000_ERR_NVM;
+	}
+	/* Clear FCERR and DAEL in hw status by writing 1 */
+	hsfsts.hsf_status.flcerr = 1;
+	hsfsts.hsf_status.dael = 1;
+	ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+	/*
+	 * Either we should have a hardware SPI cycle in progress
+	 * bit to check against, in order to start a new cycle or
+	 * FDONE bit should be changed in the hardware so that it
+	 * is 1 after hardware reset, which can then be used as an
+	 * indication whether a cycle is in progress or has been
+	 * completed.
+	 */
+	if (!hsfsts.hsf_status.flcinprog) {
+		/*
+		 * There is no cycle running at present,
+		 * so we can start a cycle.
+		 * Begin by setting Flash Cycle Done.
+		 */
+		hsfsts.hsf_status.flcdone = 1;
+		ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+		ret_val = 0;
+	} else {
+		s32 i;
+		/*
+		 * Otherwise poll for sometime so the current
+		 * cycle has a chance to end before giving up.
+		 */
+		for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (!hsfsts.hsf_status.flcinprog) {
+				ret_val = 0;
+				break;
+			}
+			udelay(1);
+		}
+		if (!ret_val) {
+			/*
+			 * Successful in waiting for previous cycle to timeout,
+			 * now set the Flash Cycle Done.
+			 */
+			hsfsts.hsf_status.flcdone = 1;
+			ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+		} else {
+			e_dbg("Flash controller busy, cannot get access\n");
+		}
+	}
+	return ret_val;
+}
+/**
+*  e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
+*  @hw: pointer to the HW structure
+*  @timeout: maximum time to wait for completion
+*
+*  This function starts a flash cycle and waits for its completion.
+**/
+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
+{
+	union ich8_hws_flash_ctrl hsflctl;
+	union ich8_hws_flash_status hsfsts;
+	u32 i = 0;
+	/* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+	hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+	hsflctl.hsf_ctrl.flcgo = 1;
+	ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+	/* wait till FDONE bit is set to 1 */
+	do {
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.flcdone)
+			break;
+		udelay(1);
+	} while (i++ < timeout);
+	if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
+		return 0;
+	return -E1000_ERR_NVM;
+}
+/**
+*  e1000_read_flash_word_ich8lan - Read word from flash
+*  @hw: pointer to the HW structure
+*  @offset: offset to data location
+*  @data: pointer to the location for storing the data
+*
+*  Reads the flash word at offset into data.  Offset is converted
+*  to bytes before read.
+**/
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u16 *data)
+{
+	/* Must convert offset into bytes. */
+	offset <<= 1;
+	return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
+}
+/**
+*  e1000_read_flash_byte_ich8lan - Read byte from flash
+*  @hw: pointer to the HW structure
+*  @offset: The offset of the byte to read.
+*  @data: Pointer to a byte to store the value read.
+*
+*  Reads a single byte from the NVM using the flash access registers.
+**/
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 *data)
+{
+	s32 ret_val;
+	u16 word = 0;
+	ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
+	if (ret_val)
+		return ret_val;
+	*data = (u8)word;
+	return 0;
+}
+/**
+*  e1000_read_flash_data_ich8lan - Read byte or word from NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset (in bytes) of the byte or word to read.
+*  @size: Size of data to read, 1=byte 2=word
+*  @data: Pointer to the word to store the value read.
+*
+*  Reads a byte or word from the NVM using the flash access registers.
+**/
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					 u8 size, u16 *data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	u32 flash_data = 0;
+	s32 ret_val = -E1000_ERR_NVM;
+	u8 count = 0;
+	if (size < 1  || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+		return -E1000_ERR_NVM;
+	flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			    hw->nvm.flash_base_addr;
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+		hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+		/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+		hsflctl.hsf_ctrl.fldbcount = size - 1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+		ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+		ret_val = e1000_flash_cycle_ich8lan(hw,
+						ICH_FLASH_READ_COMMAND_TIMEOUT);
+		/*
+		 * Check if FCERR is set to 1, if set to 1, clear it
+		 * and try the whole sequence a few more times, else
+		 * read in (shift in) the Flash Data0, the order is
+		 * least significant byte first msb to lsb
+		 */
+		if (!ret_val) {
+			flash_data = er32flash(ICH_FLASH_FDATA0);
+			if (size == 1)
+				*data = (u8)(flash_data & 0x000000FF);
+			else if (size == 2)
+				*data = (u16)(flash_data & 0x0000FFFF);
+			break;
+		} else {
+			/*
+			 * If we've gotten here, then things are probably
+			 * completely hosed, but if the error condition is
+			 * detected, it won't hurt to give it another try...
+			 * ICH_FLASH_CYCLE_REPEAT_COUNT times.
+			 */
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (hsfsts.hsf_status.flcerr) {
+				/* Repeat for some time before giving up. */
+				continue;
+			} else if (!hsfsts.hsf_status.flcdone) {
+				e_dbg("Timeout error - flash cycle did not complete.\n");
+				break;
+			}
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+	return ret_val;
+}
+/**
+*  e1000_write_nvm_ich8lan - Write word(s) to the NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset (in bytes) of the word(s) to write.
+*  @words: Size of data to write in words
+*  @data: Pointer to the word(s) to write at offset.
+*
+*  Writes a byte or word to the NVM using the flash access registers.
+**/
+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u16 i;
+	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+	    (words == 0)) {
+		e_dbg("nvm parameter(s) out of bounds\n");
+		return -E1000_ERR_NVM;
+	}
+	nvm->ops.acquire(hw);
+	for (i = 0; i < words; i++) {
+		dev_spec->shadow_ram[offset+i].modified = true;
+		dev_spec->shadow_ram[offset+i].value = data[i];
+	}
+	nvm->ops.release(hw);
+	return 0;
+}
+/**
+*  e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
+*  @hw: pointer to the HW structure
+*
+*  The NVM checksum is updated by calling the generic update_nvm_checksum,
+*  which writes the checksum to the shadow ram.  The changes in the shadow
+*  ram are then committed to the EEPROM by processing each bank at a time
+*  checking for the modified bit and writing only the pending changes.
+*  After a successful commit, the shadow ram is cleared and is ready for
+*  future writes.
+**/
+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
+	s32 ret_val;
+	u16 data;
+	ret_val = e1000e_update_nvm_checksum_generic(hw);
+	if (ret_val)
+		goto out;
+	if (nvm->type != e1000_nvm_flash_sw)
+		goto out;
+	nvm->ops.acquire(hw);
+	/*
+	 * We're writing to the opposite bank so if we're on bank 1,
+	 * write to bank 0 etc.  We also need to erase the segment that
+	 * is going to be written
+	 */
+	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+	if (ret_val) {
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
+		bank = 0;
+	}
+	if (bank == 0) {
+		new_bank_offset = nvm->flash_bank_size;
+		old_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
+		if (ret_val)
+			goto release;
+	} else {
+		old_bank_offset = nvm->flash_bank_size;
+		new_bank_offset = 0;
+		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
+		if (ret_val)
+			goto release;
+	}
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+		/*
+		 * Determine whether to write the value stored
+		 * in the other NVM bank or a modified value stored
+		 * in the shadow RAM
+		 */
+		if (dev_spec->shadow_ram[i].modified) {
+			data = dev_spec->shadow_ram[i].value;
+		} else {
+			ret_val = e1000_read_flash_word_ich8lan(hw, i +
+			                                        old_bank_offset,
+			                                        &data);
+			if (ret_val)
+				break;
+		}
+		/*
+		 * If the word is 0x13, then make sure the signature bits
+		 * (15:14) are 11b until the commit has completed.
+		 * This will allow us to write 10b which indicates the
+		 * signature is valid.  We want to do this after the write
+		 * has completed so that we don't mark the segment valid
+		 * while the write is still in progress
+		 */
+		if (i == E1000_ICH_NVM_SIG_WORD)
+			data |= E1000_ICH_NVM_SIG_MASK;
+		/* Convert offset to bytes. */
+		act_offset = (i + new_bank_offset) << 1;
+		udelay(100);
+		/* Write the bytes to the new bank. */
+		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+							       act_offset,
+							       (u8)data);
+		if (ret_val)
+			break;
+		udelay(100);
+		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+							  act_offset + 1,
+							  (u8)(data >> 8));
+		if (ret_val)
+			break;
+	}
+	/*
+	 * Don't bother writing the segment valid bits if sector
+	 * programming failed.
+	 */
+	if (ret_val) {
+		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
+		e_dbg("Flash commit failed.\n");
+		goto release;
+	}
+	/*
+	 * Finally validate the new segment by setting bit 15:14
+	 * to 10b in word 0x13 , this can be done without an
+	 * erase as well since these bits are 11 to start with
+	 * and we need to change bit 14 to 0b
+	 */
+	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
+	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
+	if (ret_val)
+		goto release;
+	data &= 0xBFFF;
+	ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+						       act_offset * 2 + 1,
+						       (u8)(data >> 8));
+	if (ret_val)
+		goto release;
+	/*
+	 * And invalidate the previously valid segment by setting
+	 * its signature word (0x13) high_byte to 0b. This can be
+	 * done without an erase because flash erase sets all bits
+	 * to 1's. We can write 1's to 0's without an erase
+	 */
+	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
+	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
+	if (ret_val)
+		goto release;
+	/* Great!  Everything worked, we can now clear the cached entries. */
+	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+		dev_spec->shadow_ram[i].modified = false;
+		dev_spec->shadow_ram[i].value = 0xFFFF;
+	}
+release:
+	nvm->ops.release(hw);
+	/*
+	 * Reload the EEPROM, or else modifications will not appear
+	 * until after the next adapter reset.
+	 */
+	if (!ret_val) {
+		nvm->ops.reload(hw);
+		usleep_range(10000, 20000);
+	}
+out:
+	if (ret_val)
+		e_dbg("NVM update error: %d\n", ret_val);
+	return ret_val;
+}
+/**
+*  e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
+*  @hw: pointer to the HW structure
+*
+*  Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
+*  If the bit is 0, that the EEPROM had been modified, but the checksum was not
+*  calculated, in which case we need to calculate the checksum and set bit 6.
+**/
+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+	/*
+	 * Read 0x19 and check bit 6.  If this bit is 0, the checksum
+	 * needs to be fixed.  This bit is an indication that the NVM
+	 * was prepared by OEM software and did not calculate the
+	 * checksum...a likely scenario.
+	 */
+	ret_val = e1000_read_nvm(hw, 0x19, 1, &data);
+	if (ret_val)
+		return ret_val;
+	if (!(data & 0x40)) {
+		data |= 0x40;
+		ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000e_update_nvm_checksum(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	return e1000e_validate_nvm_checksum_generic(hw);
+}
+/**
+*  e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+*  @hw: pointer to the HW structure
+*
+*  To prevent malicious write/erase of the NVM, set it to be read-only
+*  so that the hardware ignores all write/erase cycles of the NVM via
+*  the flash control registers.  The shadow-ram copy of the NVM will
+*  still be updated, however any updates to this copy will not stick
+*  across driver reloads.
+**/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	union ich8_flash_protected_range pr0;
+	union ich8_hws_flash_status hsfsts;
+	u32 gfpreg;
+	nvm->ops.acquire(hw);
+	gfpreg = er32flash(ICH_FLASH_GFPREG);
+	/* Write-protect GbE Sector of NVM */
+	pr0.regval = er32flash(ICH_FLASH_PR0);
+	pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+	pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+	pr0.range.wpe = true;
+	ew32flash(ICH_FLASH_PR0, pr0.regval);
+	/*
+	 * Lock down a subset of GbE Flash Control Registers, e.g.
+	 * PR0 to prevent the write-protection from being lifted.
+	 * Once FLOCKDN is set, the registers protected by it cannot
+	 * be written until FLOCKDN is cleared by a hardware reset.
+	 */
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	hsfsts.hsf_status.flockdn = true;
+	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+	nvm->ops.release(hw);
+}
+/**
+*  e1000_write_flash_data_ich8lan - Writes bytes to the NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset (in bytes) of the byte/word to read.
+*  @size: Size of data to read, 1=byte 2=word
+*  @data: The byte(s) to write to the NVM.
+*
+*  Writes one/two bytes to the NVM using the flash access registers.
+**/
+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+					  u8 size, u16 data)
+{
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	u32 flash_data = 0;
+	s32 ret_val;
+	u8 count = 0;
+	if (size < 1 || size > 2 || data > size * 0xff ||
+	    offset > ICH_FLASH_LINEAR_ADDR_MASK)
+		return -E1000_ERR_NVM;
+	flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+			    hw->nvm.flash_base_addr;
+	do {
+		udelay(1);
+		/* Steps */
+		ret_val = e1000_flash_cycle_init_ich8lan(hw);
+		if (ret_val)
+			break;
+		hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+		/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+		hsflctl.hsf_ctrl.fldbcount = size -1;
+		hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+		ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+		ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+		if (size == 1)
+			flash_data = (u32)data & 0x00FF;
+		else
+			flash_data = (u32)data;
+		ew32flash(ICH_FLASH_FDATA0, flash_data);
+		/*
+		 * check if FCERR is set to 1 , if set to 1, clear it
+		 * and try the whole sequence a few more times else done
+		 */
+		ret_val = e1000_flash_cycle_ich8lan(hw,
+					       ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+		if (!ret_val)
+			break;
+		/*
+		 * If we're here, then things are most likely
+		 * completely hosed, but if the error condition
+		 * is detected, it won't hurt to give it another
+		 * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+		 */
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.flcerr)
+			/* Repeat for some time before giving up. */
+			continue;
+		if (!hsfsts.hsf_status.flcdone) {
+			e_dbg("Timeout error - flash cycle did not complete.\n");
+			break;
+		}
+	} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+	return ret_val;
+}
+/**
+*  e1000_write_flash_byte_ich8lan - Write a single byte to NVM
+*  @hw: pointer to the HW structure
+*  @offset: The index of the byte to read.
+*  @data: The byte to write to the NVM.
+*
+*  Writes a single byte to the NVM using the flash access registers.
+**/
+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+					  u8 data)
+{
+	u16 word = (u16)data;
+	return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
+}
+/**
+*  e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
+*  @hw: pointer to the HW structure
+*  @offset: The offset of the byte to write.
+*  @byte: The byte to write to the NVM.
+*
+*  Writes a single byte to the NVM using the flash access registers.
+*  Goes through a retry algorithm before giving up.
+**/
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+						u32 offset, u8 byte)
+{
+	s32 ret_val;
+	u16 program_retries;
+	ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+	if (!ret_val)
+		return ret_val;
+	for (program_retries = 0; program_retries < 100; program_retries++) {
+		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
+		udelay(100);
+		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+		if (!ret_val)
+			break;
+	}
+	if (program_retries == 100)
+		return -E1000_ERR_NVM;
+	return 0;
+}
+/**
+*  e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
+*  @hw: pointer to the HW structure
+*  @bank: 0 for first bank, 1 for second bank, etc.
+*
+*  Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
+*  bank N is 4096 * N + flash_reg_addr.
+**/
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
+{
+	struct e1000_nvm_info *nvm = &hw->nvm;
+	union ich8_hws_flash_status hsfsts;
+	union ich8_hws_flash_ctrl hsflctl;
+	u32 flash_linear_addr;
+	/* bank size is in 16bit words - adjust to bytes */
+	u32 flash_bank_size = nvm->flash_bank_size * 2;
+	s32 ret_val;
+	s32 count = 0;
+	s32 j, iteration, sector_size;
+	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+	/*
+	 * Determine HW Sector size: Read BERASE bits of hw flash status
+	 * register
+	 * 00: The Hw sector is 256 bytes, hence we need to erase 16
+	 *     consecutive sectors.  The start index for the nth Hw sector
+	 *     can be calculated as = bank * 4096 + n * 256
+	 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+	 *     The start index for the nth Hw sector can be calculated
+	 *     as = bank * 4096
+	 * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
+	 *     (ich9 only, otherwise error condition)
+	 * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
+	 */
+	switch (hsfsts.hsf_status.berasesz) {
+	case 0:
+		/* Hw sector size 256 */
+		sector_size = ICH_FLASH_SEG_SIZE_256;
+		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
+		break;
+	case 1:
+		sector_size = ICH_FLASH_SEG_SIZE_4K;
+		iteration = 1;
+		break;
+	case 2:
+		sector_size = ICH_FLASH_SEG_SIZE_8K;
+		iteration = 1;
+		break;
+	case 3:
+		sector_size = ICH_FLASH_SEG_SIZE_64K;
+		iteration = 1;
+		break;
+	default:
+		return -E1000_ERR_NVM;
+	}
+	/* Start with the base address, then add the sector offset. */
+	flash_linear_addr = hw->nvm.flash_base_addr;
+	flash_linear_addr += (bank) ? flash_bank_size : 0;
+	for (j = 0; j < iteration ; j++) {
+		do {
+			/* Steps */
+			ret_val = e1000_flash_cycle_init_ich8lan(hw);
+			if (ret_val)
+				return ret_val;
+			/*
+			 * Write a value 11 (block Erase) in Flash
+			 * Cycle field in hw flash control
+			 */
+			hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+			hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+			ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+			/*
+			 * Write the last 24 bits of an index within the
+			 * block into Flash Linear address field in Flash
+			 * Address.
+			 */
+			flash_linear_addr += (j * sector_size);
+			ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+			ret_val = e1000_flash_cycle_ich8lan(hw,
+					       ICH_FLASH_ERASE_COMMAND_TIMEOUT);
+			if (!ret_val)
+				break;
+			/*
+			 * Check if FCERR is set to 1.  If 1,
+			 * clear it and try the whole sequence
+			 * a few more times else Done
+			 */
+			hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+			if (hsfsts.hsf_status.flcerr)
+				/* repeat for some time before giving up */
+				continue;
+			else if (!hsfsts.hsf_status.flcdone)
+				return ret_val;
+		} while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
+	}
+	return 0;
+}
+/**
+*  e1000_valid_led_default_ich8lan - Set the default LED settings
+*  @hw: pointer to the HW structure
+*  @data: Pointer to the LED settings
+*
+*  Reads the LED default settings from the NVM to data.  If the NVM LED
+*  settings is all 0's or F's, set the LED default to a valid LED default
+*  setting.
+**/
+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
+{
+	s32 ret_val;
+	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		return ret_val;
+	}
+	if (*data == ID_LED_RESERVED_0000 ||
+	    *data == ID_LED_RESERVED_FFFF)
+		*data = ID_LED_DEFAULT_ICH8LAN;
+	return 0;
+}
+/**
+*  e1000_id_led_init_pchlan - store LED configurations
+*  @hw: pointer to the HW structure
+*
+*  PCH does not control LEDs via the LEDCTL register, rather it uses
+*  the PHY LED configuration register.
+*
+*  PCH also does not have an "always on" or "always off" mode which
+*  complicates the ID feature.  Instead of using the "on" mode to indicate
+*  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
+*  use "link_up" mode.  The LEDs will still ID on request if there is no
+*  link based on logic in e1000_led_[on|off]_pchlan().
+**/
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
+	u16 data, i, temp, shift;
+	/* Get default ID LED modes */
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		return ret_val;
+	mac->ledctl_default = er32(LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
+		shift = (i * 5);
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_on << shift);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_on << shift);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+	return 0;
+}
+/**
+*  e1000_get_bus_info_ich8lan - Get/Set the bus type and width
+*  @hw: pointer to the HW structure
+*
+*  ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
+*  register, so the the bus width is hard coded.
+**/
+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_bus_info *bus = &hw->bus;
+	s32 ret_val;
+	ret_val = e1000e_get_bus_info_pcie(hw);
+	/*
+	 * ICH devices are "PCI Express"-ish.  They have
+	 * a configuration space, but do not contain
+	 * PCI Express Capability registers, so bus width
+	 * must be hardcoded.
+	 */
+	if (bus->width == e1000_bus_width_unknown)
+		bus->width = e1000_bus_width_pcie_x1;
+	return ret_val;
+}
+/**
+*  e1000_reset_hw_ich8lan - Reset the hardware
+*  @hw: pointer to the HW structure
+*
+*  Does a full reset of the hardware which includes a reset of the PHY and
+*  MAC.
+**/
+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u16 kum_cfg;
+	u32 ctrl, reg;
+	s32 ret_val;
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = e1000e_disable_pcie_master(hw);
+	if (ret_val)
+		e_dbg("PCI-E Master disable polling has failed.\n");
+	e_dbg("Masking off all interrupts\n");
+	ew32(IMC, 0xffffffff);
+	/*
+	 * Disable the Transmit and Receive units.  Then delay to allow
+	 * any pending transactions to complete before we hit the MAC
+	 * with the global reset.
+	 */
+	ew32(RCTL, 0);
+	ew32(TCTL, E1000_TCTL_PSP);
+	e1e_flush();
+	usleep_range(10000, 20000);
+	/* Workaround for ICH8 bit corruption issue in FIFO memory */
+	if (hw->mac.type == e1000_ich8lan) {
+		/* Set Tx and Rx buffer allocation to 8k apiece. */
+		ew32(PBA, E1000_PBA_8K);
+		/* Set Packet Buffer Size to 16k. */
+		ew32(PBS, E1000_PBS_16K);
+	}
+	if (hw->mac.type == e1000_pchlan) {
+		/* Save the NVM K1 bit setting */
+		ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg);
+		if (ret_val)
+			return ret_val;
+		if (kum_cfg & E1000_NVM_K1_ENABLE)
+			dev_spec->nvm_k1_enabled = true;
+		else
+			dev_spec->nvm_k1_enabled = false;
+	}
+	ctrl = er32(CTRL);
+	if (!hw->phy.ops.check_reset_block(hw)) {
+		/*
+		 * Full-chip reset requires MAC and PHY reset at the same
+		 * time to make sure the interface between MAC and the
+		 * external PHY is reset.
+		 */
+		ctrl |= E1000_CTRL_PHY_RST;
+		/*
+		 * Gate automatic PHY configuration by hardware on
+		 * non-managed 82579
+		 */
+		if ((hw->mac.type == e1000_pch2lan) &&
+		    !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+			e1000_gate_hw_phy_config_ich8lan(hw, true);
+	}
+	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	e_dbg("Issuing a global reset to ich8lan\n");
+	ew32(CTRL, (ctrl | E1000_CTRL_RST));
+	/* cannot issue a flush here because it hangs the hardware */
+	msleep(20);
+	/* Set Phy Config Counter to 50msec */
+	if (hw->mac.type == e1000_pch2lan) {
+		reg = er32(FEXTNVM3);
+		reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+		reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+		ew32(FEXTNVM3, reg);
+	}
+	if (!ret_val)
+		clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
+	if (ctrl & E1000_CTRL_PHY_RST) {
+		ret_val = hw->phy.ops.get_cfg_done(hw);
+		if (ret_val)
+			return ret_val;
+		ret_val = e1000_post_phy_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	/*
+	 * For PCH, this write will make sure that any noise
+	 * will be detected as a CRC error and be dropped rather than show up
+	 * as a bad packet to the DMA engine.
+	 */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(CRC_OFFSET, 0x65656565);
+	ew32(IMC, 0xffffffff);
+	er32(ICR);
+	reg = er32(KABGTXD);
+	reg |= E1000_KABGTXD_BGSQLBIAS;
+	ew32(KABGTXD, reg);
+	return 0;
+}
+/**
+*  e1000_init_hw_ich8lan - Initialize the hardware
+*  @hw: pointer to the HW structure
+*
+*  Prepares the hardware for transmit and receive by doing the following:
+*   - initialize hardware bits
+*   - initialize LED identification
+*   - setup receive address registers
+*   - setup flow control
+*   - setup transmit descriptors
+*   - clear statistics
+**/
+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	u32 ctrl_ext, txdctl, snoop;
+	s32 ret_val;
+	u16 i;
+	e1000_initialize_hw_bits_ich8lan(hw);
+	/* Initialize identification LED */
+	ret_val = mac->ops.id_led_init(hw);
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
+	/* Setup the receive address. */
+	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+	/* Zero out the Multicast HASH table */
+	e_dbg("Zeroing the MTA\n");
+	for (i = 0; i < mac->mta_reg_count; i++)
+		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Disable wakeup by clearing the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		e1e_rphy(hw, BM_PORT_GEN_CFG, &i);
+		i &= ~BM_WUC_HOST_WU_BIT;
+		e1e_wphy(hw, BM_PORT_GEN_CFG, i);
+		ret_val = e1000_phy_hw_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+	/* Setup link and flow control */
+	ret_val = mac->ops.setup_link(hw);
+	/* Set the transmit descriptor write-back policy for both queues */
+	txdctl = er32(TXDCTL(0));
+	txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+		 E1000_TXDCTL_FULL_TX_DESC_WB;
+	txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+		 E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+	ew32(TXDCTL(0), txdctl);
+	txdctl = er32(TXDCTL(1));
+	txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+		 E1000_TXDCTL_FULL_TX_DESC_WB;
+	txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+		 E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+	ew32(TXDCTL(1), txdctl);
+	/*
+	 * ICH8 has opposite polarity of no_snoop bits.
+	 * By default, we should use snoop behavior.
+	 */
+	if (mac->type == e1000_ich8lan)
+		snoop = PCIE_ICH8_SNOOP_ALL;
+	else
+		snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
+	e1000e_set_pcie_no_snoop(hw, snoop);
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+	ew32(CTRL_EXT, ctrl_ext);
+	/*
+	 * Clear all of the statistics registers (clear on read).  It is
+	 * important that we do this after we have tried to establish link
+	 * because the symbol error count will increment wildly if there
+	 * is no link.
+	 */
+	e1000_clear_hw_cntrs_ich8lan(hw);
+	return ret_val;
+}
+/**
+*  e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
+*  @hw: pointer to the HW structure
+*
+*  Sets/Clears required hardware bits necessary for correctly setting up the
+*  hardware for transmit and receive.
+**/
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
+{
+	u32 reg;
+	/* Extended Device Control */
+	reg = er32(CTRL_EXT);
+	reg |= (1 << 22);
+	/* Enable PHY low-power state when MAC is at D3 w/o WoL */
+	if (hw->mac.type >= e1000_pchlan)
+		reg |= E1000_CTRL_EXT_PHYPDEN;
+	ew32(CTRL_EXT, reg);
+	/* Transmit Descriptor Control 0 */
+	reg = er32(TXDCTL(0));
+	reg |= (1 << 22);
+	ew32(TXDCTL(0), reg);
+	/* Transmit Descriptor Control 1 */
+	reg = er32(TXDCTL(1));
+	reg |= (1 << 22);
+	ew32(TXDCTL(1), reg);
+	/* Transmit Arbitration Control 0 */
+	reg = er32(TARC(0));
+	if (hw->mac.type == e1000_ich8lan)
+		reg |= (1 << 28) | (1 << 29);
+	reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
+	ew32(TARC(0), reg);
+	/* Transmit Arbitration Control 1 */
+	reg = er32(TARC(1));
+	if (er32(TCTL) & E1000_TCTL_MULR)
+		reg &= ~(1 << 28);
+	else
+		reg |= (1 << 28);
+	reg |= (1 << 24) | (1 << 26) | (1 << 30);
+	ew32(TARC(1), reg);
+	/* Device Status */
+	if (hw->mac.type == e1000_ich8lan) {
+		reg = er32(STATUS);
+		reg &= ~(1 << 31);
+		ew32(STATUS, reg);
+	}
+	/*
+	 * work-around descriptor data corruption issue during nfs v2 udp
+	 * traffic, just disable the nfs filtering capability
+	 */
+	reg = er32(RFCTL);
+	reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+	/*
+	 * Disable IPv6 extension header parsing because some malformed
+	 * IPv6 headers can hang the Rx.
+	 */
+	if (hw->mac.type == e1000_ich8lan)
+		reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+	ew32(RFCTL, reg);
+}
+/**
+*  e1000_setup_link_ich8lan - Setup flow control and link settings
+*  @hw: pointer to the HW structure
+*
+*  Determines which flow control settings to use, then configures flow
+*  control.  Calls the appropriate media-specific link configuration
+*  function.  Assuming the adapter has a valid link partner, a valid link
+*  should be established.  Assumes the hardware has previously been reset
+*  and the transmitter and receiver are not enabled.
+**/
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	if (hw->phy.ops.check_reset_block(hw))
+		return 0;
+	/*
+	 * ICH parts do not have a word in the NVM to determine
+	 * the default flow control setting, so we explicitly
+	 * set it to full.
+	 */
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		/* Workaround h/w hang when Tx flow control enabled */
+		if (hw->mac.type == e1000_pchlan)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else
+			hw->fc.requested_mode = e1000_fc_full;
+	}
+	/*
+	 * Save off the requested flow control mode for use later.  Depending
+	 * on the link partner's capabilities, we may or may not use this mode.
+	 */
+	hw->fc.current_mode = hw->fc.requested_mode;
+	e_dbg("After fix-ups FlowControl is now = %x\n",
+		hw->fc.current_mode);
+	/* Continue to configure the copper link. */
+	ret_val = hw->mac.ops.setup_physical_interface(hw);
+	if (ret_val)
+		return ret_val;
+	ew32(FCTTV, hw->fc.pause_time);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
+	    (hw->phy.type == e1000_phy_i217) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ew32(FCRTV_PCH, hw->fc.refresh_time);
+		ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+				   hw->fc.pause_time);
+		if (ret_val)
+			return ret_val;
+	}
+	return e1000e_set_fc_watermarks(hw);
+}
+/**
+*  e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface
+*  @hw: pointer to the HW structure
+*
+*  Configures the kumeran interface to the PHY to wait the appropriate time
+*  when polling the PHY, then call the generic setup_copper_link to finish
+*  configuring the copper link.
+**/
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+	s32 ret_val;
+	u16 reg_data;
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_SLU;
+	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+	ew32(CTRL, ctrl);
+	/*
+	 * Set the mac to wait the maximum time between each iteration
+	 * and increase the max iterations when polling the phy;
+	 * this fixes erroneous timeouts at 10Mbps.
+	 */
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
+	if (ret_val)
+		return ret_val;
+	ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+	                               &reg_data);
+	if (ret_val)
+		return ret_val;
+	reg_data |= 0x3F;
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+	                                reg_data);
+	if (ret_val)
+		return ret_val;
+	switch (hw->phy.type) {
+	case e1000_phy_igp_3:
+		ret_val = e1000e_copper_link_setup_igp(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_bm:
+	case e1000_phy_82578:
+		ret_val = e1000e_copper_link_setup_m88(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_82577:
+	case e1000_phy_82579:
+	case e1000_phy_i217:
+		ret_val = e1000_copper_link_setup_82577(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_ife:
+		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		if (ret_val)
+			return ret_val;
+		reg_data &= ~IFE_PMC_AUTO_MDIX;
+		switch (hw->phy.mdix) {
+		case 1:
+			reg_data &= ~IFE_PMC_FORCE_MDIX;
+			break;
+		case 2:
+			reg_data |= IFE_PMC_FORCE_MDIX;
+			break;
+		case 0:
+		default:
+			reg_data |= IFE_PMC_AUTO_MDIX;
+			break;
+		}
+		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		if (ret_val)
+			return ret_val;
+		break;
+	default:
+		break;
+	}
+	return e1000e_setup_copper_link(hw);
+}
+/**
+*  e1000_get_link_up_info_ich8lan - Get current link speed and duplex
+*  @hw: pointer to the HW structure
+*  @speed: pointer to store current link speed
+*  @duplex: pointer to store the current link duplex
+*
+*  Calls the generic get_speed_and_duplex to retrieve the current link
+*  information and then calls the Kumeran lock loss workaround for links at
+*  gigabit speeds.
+**/
+static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
+					  u16 *duplex)
+{
+	s32 ret_val;
+	ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
+	if (ret_val)
+		return ret_val;
+	if ((hw->mac.type == e1000_ich8lan) &&
+	    (hw->phy.type == e1000_phy_igp_3) &&
+	    (*speed == SPEED_1000)) {
+		ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
+	}
+	return ret_val;
+}
+/**
+*  e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround
+*  @hw: pointer to the HW structure
+*
+*  Work-around for 82566 Kumeran PCS lock loss:
+*  On link status change (i.e. PCI reset, speed change) and link is up and
+*  speed is gigabit-
+*    0) if workaround is optionally disabled do nothing
+*    1) wait 1ms for Kumeran link to come up
+*    2) check Kumeran Diagnostic register PCS lock loss bit
+*    3) if not set the link is locked (all is good), otherwise...
+*    4) reset the PHY
+*    5) repeat up to 10 times
+*  Note: this is only called for IGP3 copper when speed is 1gb.
+**/
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 phy_ctrl;
+	s32 ret_val;
+	u16 i, data;
+	bool link;
+	if (!dev_spec->kmrn_lock_loss_workaround_enabled)
+		return 0;
+	/*
+	 * Make sure link is up before proceeding.  If not just return.
+	 * Attempting this while link is negotiating fouled up link
+	 * stability
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (!link)
+		return 0;
+	for (i = 0; i < 10; i++) {
+		/* read once to clear */
+		ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+		if (ret_val)
+			return ret_val;
+		/* and again to get new status */
+		ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+		if (ret_val)
+			return ret_val;
+		/* check for PCS lock */
+		if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+			return 0;
+		/* Issue PHY reset */
+		e1000_phy_hw_reset(hw);
+		mdelay(5);
+	}
+	/* Disable GigE link negotiation */
+	phy_ctrl = er32(PHY_CTRL);
+	phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
+		     E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+	ew32(PHY_CTRL, phy_ctrl);
+	/*
+	 * Call gig speed drop workaround on Gig disable before accessing
+	 * any PHY registers
+	 */
+	e1000e_gig_downshift_workaround_ich8lan(hw);
+	/* unable to acquire PCS lock */
+	return -E1000_ERR_PHY;
+}
+/**
+*  e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+*  @hw: pointer to the HW structure
+*  @state: boolean value used to set the current Kumeran workaround state
+*
+*  If ICH8, set the current Kumeran workaround state (enabled - true
+*  /disabled - false).
+**/
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+						 bool state)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	if (hw->mac.type != e1000_ich8lan) {
+		e_dbg("Workaround applies to ICH8 only.\n");
+		return;
+	}
+	dev_spec->kmrn_lock_loss_workaround_enabled = state;
+}
+/**
+*  e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3
+*  @hw: pointer to the HW structure
+*
+*  Workaround for 82566 power-down on D3 entry:
+*    1) disable gigabit link
+*    2) write VR power-down enable
+*    3) read it back
+*  Continue if successful, else issue LCD reset and repeat
+**/
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
+{
+	u32 reg;
+	u16 data;
+	u8  retry = 0;
+	if (hw->phy.type != e1000_phy_igp_3)
+		return;
+	/* Try the workaround twice (if needed) */
+	do {
+		/* Disable link */
+		reg = er32(PHY_CTRL);
+		reg |= (E1000_PHY_CTRL_GBE_DISABLE |
+			E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+		ew32(PHY_CTRL, reg);
+		/*
+		 * Call gig speed drop workaround on Gig disable before
+		 * accessing any PHY registers
+		 */
+		if (hw->mac.type == e1000_ich8lan)
+			e1000e_gig_downshift_workaround_ich8lan(hw);
+		/* Write VR power-down enable */
+		e1e_rphy(hw, IGP3_VR_CTRL, &data);
+		data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+		e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN);
+		/* Read it back and test */
+		e1e_rphy(hw, IGP3_VR_CTRL, &data);
+		data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+		if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
+			break;
+		/* Issue PHY reset and repeat at most one more time */
+		reg = er32(CTRL);
+		ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+		retry++;
+	} while (retry);
+}
+/**
+*  e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
+*  @hw: pointer to the HW structure
+*
+*  Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
+*  LPLU, Gig disable, MDIC PHY reset):
+*    1) Set Kumeran Near-end loopback
+*    2) Clear Kumeran Near-end loopback
+*  Should only be called for ICH8[m] devices with any 1G Phy.
+**/
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 reg_data;
+	if ((hw->mac.type != e1000_ich8lan) || (hw->phy.type == e1000_phy_ife))
+		return;
+	ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+				      &reg_data);
+	if (ret_val)
+		return;
+	reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+				       reg_data);
+	if (ret_val)
+		return;
+	reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
+	ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+				       reg_data);
+}
+/**
+*  e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
+*  @hw: pointer to the HW structure
+*
+*  During S0 to Sx transition, it is possible the link remains at gig
+*  instead of negotiating to a lower speed.  Before going to Sx, set
+*  'Gig Disable' to force link speed negotiation to a lower speed based on
+*  the LPLU setting in the NVM or custom setting.  For PCH and newer parts,
+*  the OEM bits PHY register (LED, GbE disable and LPLU configurations) also
+*  needs to be written.
+*  Parts that support (and are linked to a partner which support) EEE in
+*  100Mbps should disable LPLU since 100Mbps w/ EEE requires less power
+*  than 10Mbps w/o EEE.
+**/
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	u32 phy_ctrl;
+	s32 ret_val;
+	phy_ctrl = er32(PHY_CTRL);
+	phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+	if (hw->phy.type == e1000_phy_i217) {
+		u16 phy_reg;
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			goto out;
+		if (!dev_spec->eee_disable) {
+			u16 eee_advert;
+			ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
+						  I217_EEE_ADVERTISEMENT);
+			if (ret_val)
+				goto release;
+			e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert);
+			/*
+			 * Disable LPLU if both link partners support 100BaseT
+			 * EEE and 100Full is advertised on both ends of the
+			 * link.
+			 */
+			if ((eee_advert & I217_EEE_100_SUPPORTED) &&
+			    (dev_spec->eee_lp_ability &
+			     I217_EEE_100_SUPPORTED) &&
+			    (hw->phy.autoneg_advertised & ADVERTISE_100_FULL))
+				phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
+					      E1000_PHY_CTRL_NOND0A_LPLU);
+		}
+		/*
+		 * For i217 Intel Rapid Start Technology support,
+		 * when the system is going into Sx and no manageability engine
+		 * is present, the driver must configure proxy to reset only on
+		 * power good.  LPI (Low Power Idle) state must also reset only
+		 * on power good, as well as the MTA (Multicast table array).
+		 * The SMBus release must also be disabled on LCD reset.
+		 */
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			/* Enable proxy to reset only on power good. */
+			e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg);
+			phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE;
+			e1e_wphy_locked(hw, I217_PROXY_CTRL, phy_reg);
+			/*
+			 * Set bit enable LPI (EEE) to reset only on
+			 * power good.
+			 */
+			e1e_rphy_locked(hw, I217_SxCTRL, &phy_reg);
+			phy_reg |= I217_SxCTRL_ENABLE_LPI_RESET;
+			e1e_wphy_locked(hw, I217_SxCTRL, phy_reg);
+			/* Disable the SMB release on LCD reset. */
+			e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
+			phy_reg &= ~I217_MEMPWR_DISABLE_SMB_RELEASE;
+			e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);
+		}
+		/*
+		 * Enable MTA to reset for Intel Rapid Start Technology
+		 * Support
+		 */
+		e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
+		phy_reg |= I217_CGFREG_ENABLE_MTA_RESET;
+		e1e_wphy_locked(hw, I217_CGFREG, phy_reg);
+release:
+		hw->phy.ops.release(hw);
+	}
+out:
+	ew32(PHY_CTRL, phy_ctrl);
+	if (hw->mac.type == e1000_ich8lan)
+		e1000e_gig_downshift_workaround_ich8lan(hw);
+	if (hw->mac.type >= e1000_pchlan) {
+		e1000_oem_bits_config_ich8lan(hw, false);
+		/* Reset PHY to activate OEM bits on 82577/8 */
+		if (hw->mac.type == e1000_pchlan)
+			e1000e_phy_hw_reset_generic(hw);
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return;
+		e1000_write_smbus_addr(hw);
+		hw->phy.ops.release(hw);
+	}
+}
+/**
+*  e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
+*  @hw: pointer to the HW structure
+*
+*  During Sx to S0 transitions on non-managed devices or managed devices
+*  on which PHY resets are not blocked, if the PHY registers cannot be
+*  accessed properly by the s/w toggle the LANPHYPC value to power cycle
+*  the PHY.
+*  On i217, setup Intel Rapid Start Technology.
+**/
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	if (hw->mac.type < e1000_pch2lan)
+		return;
+	ret_val = e1000_init_phy_workarounds_pchlan(hw);
+	if (ret_val) {
+		e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
+		return;
+	}
+	/*
+	 * For i217 Intel Rapid Start Technology support when the system
+	 * is transitioning from Sx and no manageability engine is present
+	 * configure SMBus to restore on reset, disable proxy, and enable
+	 * the reset on MTA (Multicast table array).
+	 */
+	if (hw->phy.type == e1000_phy_i217) {
+		u16 phy_reg;
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			e_dbg("Failed to setup iRST\n");
+			return;
+		}
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			/*
+			 * Restore clear on SMB if no manageability engine
+			 * is present
+			 */
+			ret_val = e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg);
+			if (ret_val)
+				goto release;
+			phy_reg |= I217_MEMPWR_DISABLE_SMB_RELEASE;
+			e1e_wphy_locked(hw, I217_MEMPWR, phy_reg);
+			/* Disable Proxy */
+			e1e_wphy_locked(hw, I217_PROXY_CTRL, 0);
+		}
+		/* Enable reset on MTA */
+		ret_val = e1e_rphy_locked(hw, I217_CGFREG, &phy_reg);
+		if (ret_val)
+			goto release;
+		phy_reg &= ~I217_CGFREG_ENABLE_MTA_RESET;
+		e1e_wphy_locked(hw, I217_CGFREG, phy_reg);
+release:
+		if (ret_val)
+			e_dbg("Error %d in resume workarounds\n", ret_val);
+		hw->phy.ops.release(hw);
+	}
+}
+/**
+*  e1000_cleanup_led_ich8lan - Restore the default LED operation
+*  @hw: pointer to the HW structure
+*
+*  Return the LED back to the default configuration.
+**/
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+	ew32(LEDCTL, hw->mac.ledctl_default);
+	return 0;
+}
+/**
+*  e1000_led_on_ich8lan - Turn LEDs on
+*  @hw: pointer to the HW structure
+*
+*  Turn on the LEDs.
+**/
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+				(IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+	ew32(LEDCTL, hw->mac.ledctl_mode2);
+	return 0;
+}
+/**
+*  e1000_led_off_ich8lan - Turn LEDs off
+*  @hw: pointer to the HW structure
+*
+*  Turn off the LEDs.
+**/
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
+{
+	if (hw->phy.type == e1000_phy_ife)
+		return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+				(IFE_PSCL_PROBE_MODE |
+				 IFE_PSCL_PROBE_LEDS_OFF));
+	ew32(LEDCTL, hw->mac.ledctl_mode1);
+	return 0;
+}
+/**
+*  e1000_setup_led_pchlan - Configures SW controllable LED
+*  @hw: pointer to the HW structure
+*
+*  This prepares the SW controllable LED for use.
+**/
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
+{
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
+}
+/**
+*  e1000_cleanup_led_pchlan - Restore the default LED operation
+*  @hw: pointer to the HW structure
+*
+*  Return the LED back to the default configuration.
+**/
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
+{
+	return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
+}
+/**
+*  e1000_led_on_pchlan - Turn LEDs on
+*  @hw: pointer to the HW structure
+*
+*  Turn on the LEDs.
+**/
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode2;
+	u32 i, led;
+	/*
+	 * If no link, then turn LED on by setting the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode2.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+/**
+*  e1000_led_off_pchlan - Turn LEDs off
+*  @hw: pointer to the HW structure
+*
+*  Turn off the LEDs.
+**/
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode1;
+	u32 i, led;
+	/*
+	 * If no link, then turn LED off by clearing the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode1.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+	return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+/**
+*  e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset
+*  @hw: pointer to the HW structure
+*
+*  Read appropriate register for the config done bit for completion status
+*  and configure the PHY through s/w for EEPROM-less parts.
+*
+*  NOTE: some silicon which is EEPROM-less will fail trying to read the
+*  config done bit, so only an error is logged and continues.  If we were
+*  to return with error, EEPROM-less silicon would not be able to be reset
+*  or change link.
+**/
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 bank = 0;
+	u32 status;
+	e1000e_get_cfg_done(hw);
+	/* Wait for indication from h/w that it has completed basic config */
+	if (hw->mac.type >= e1000_ich10lan) {
+		e1000_lan_init_done_ich8lan(hw);
+	} else {
+		ret_val = e1000e_get_auto_rd_done(hw);
+		if (ret_val) {
+			/*
+			 * When auto config read does not complete, do not
+			 * return with an error. This can happen in situations
+			 * where there is no eeprom and prevents getting link.
+			 */
+			e_dbg("Auto Read Done did not complete\n");
+			ret_val = 0;
+		}
+	}
+	/* Clear PHY Reset Asserted bit */
+	status = er32(STATUS);
+	if (status & E1000_STATUS_PHYRA)
+		ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+	else
+		e_dbg("PHY Reset Asserted not set - needs delay\n");
+	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
+	if (hw->mac.type <= e1000_ich9lan) {
+		if (!(er32(EECD) & E1000_EECD_PRES) &&
+		    (hw->phy.type == e1000_phy_igp_3)) {
+			e1000e_phy_init_script_igp3(hw);
+		}
+	} else {
+		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
+			/* Maybe we should do a basic PHY config */
+			e_dbg("EEPROM not present\n");
+			ret_val = -E1000_ERR_CONFIG;
+		}
+	}
+	return ret_val;
+}
+/**
+* e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
+* @hw: pointer to the HW structure
+*
+* In the case of a PHY power down to save power, or to turn off link during a
+* driver unload, or wake on lan is not enabled, remove the link.
+**/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+}
+/**
+*  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
+*  @hw: pointer to the HW structure
+*
+*  Clears hardware counters specific to the silicon family and calls
+*  clear_hw_cntrs_generic to clear all general purpose counters.
+**/
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
+{
+	u16 phy_data;
+	s32 ret_val;
+	e1000e_clear_hw_cntrs_base(hw);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+	er32(IAC);
+	er32(ICRXOC);
+	/* Clear PHY statistics registers */
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
+	    (hw->phy.type == e1000_phy_i217) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return;
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
+		if (ret_val)
+			goto release;
+		hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+release:
+		hw->phy.ops.release(hw);
+	}
+}
+static const struct e1000_mac_operations ich8_mac_ops = {
+	/* check_mng_mode dependent on mac type */
+	.check_for_link		= e1000_check_for_copper_link_ich8lan,
+	/* cleanup_led dependent on mac type */
+	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
+	.get_bus_info		= e1000_get_bus_info_ich8lan,
+	.set_lan_id		= e1000_set_lan_id_single_port,
+	.get_link_up_info	= e1000_get_link_up_info_ich8lan,
+	/* led_on dependent on mac type */
+	/* led_off dependent on mac type */
+	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.reset_hw		= e1000_reset_hw_ich8lan,
+	.init_hw		= e1000_init_hw_ich8lan,
+	.setup_link		= e1000_setup_link_ich8lan,
+	.setup_physical_interface= e1000_setup_copper_link_ich8lan,
+	/* id_led_init dependent on mac type */
+	.config_collision_dist	= e1000e_config_collision_dist_generic,
+	.rar_set		= e1000e_rar_set_generic,
+};
+static const struct e1000_phy_operations ich8_phy_ops = {
+	.acquire		= e1000_acquire_swflag_ich8lan,
+	.check_reset_block	= e1000_check_reset_block_ich8lan,
+	.commit			= NULL,
+	.get_cfg_done		= e1000_get_cfg_done_ich8lan,
+	.get_cable_length	= e1000e_get_cable_length_igp_2,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_release_swflag_ich8lan,
+	.reset			= e1000_phy_hw_reset_ich8lan,
+	.set_d0_lplu_state	= e1000_set_d0_lplu_state_ich8lan,
+	.set_d3_lplu_state	= e1000_set_d3_lplu_state_ich8lan,
+	.write_reg		= e1000e_write_phy_reg_igp,
+};
+static const struct e1000_nvm_operations ich8_nvm_ops = {
+	.acquire		= e1000_acquire_nvm_ich8lan,
+	.read		 	= e1000_read_nvm_ich8lan,
+	.release		= e1000_release_nvm_ich8lan,
+	.reload			= e1000e_reload_nvm_generic,
+	.update			= e1000_update_nvm_checksum_ich8lan,
+	.valid_led_default	= e1000_valid_led_default_ich8lan,
+	.validate		= e1000_validate_nvm_checksum_ich8lan,
+	.write			= e1000_write_nvm_ich8lan,
+};
+const struct e1000_info e1000_ich8_info = {
+	.mac			= e1000_ich8lan,
+	.flags			= FLAG_HAS_WOL
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 8,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+const struct e1000_info e1000_ich9_info = {
+	.mac			= e1000_ich9lan,
+	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+const struct e1000_info e1000_ich10_info = {
+	.mac			= e1000_ich10lan,
+	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_APME_IN_WUC,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+const struct e1000_info e1000_pch_info = {
+	.mac			= e1000_pchlan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS,
+	.pba			= 26,
+	.max_hw_frame_size	= 4096,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+const struct e1000_info e1000_pch2_info = {
+	.mac			= e1000_pch2lan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+const struct e1000_info e1000_pch_lpt_info = {
+	.mac			= e1000_pch_lpt,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};

branch	stable-1.5
changeset 2546	2fa43746d972