|
1 /******************************************************************************* |
|
2 |
|
3 Intel PRO/1000 Linux driver |
|
4 Copyright(c) 1999 - 2012 Intel Corporation. |
|
5 |
|
6 This program is free software; you can redistribute it and/or modify it |
|
7 under the terms and conditions of the GNU General Public License, |
|
8 version 2, as published by the Free Software Foundation. |
|
9 |
|
10 This program is distributed in the hope it will be useful, but WITHOUT |
|
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
|
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
|
13 more details. |
|
14 |
|
15 You should have received a copy of the GNU General Public License along with |
|
16 this program; if not, write to the Free Software Foundation, Inc., |
|
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
|
18 |
|
19 The full GNU General Public License is included in this distribution in |
|
20 the file called "COPYING". |
|
21 |
|
22 Contact Information: |
|
23 Linux NICS <linux.nics@intel.com> |
|
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
|
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
|
26 |
|
27 *******************************************************************************/ |
|
28 |
|
29 /* ethtool support for e1000 */ |
|
30 |
|
31 #include <linux/netdevice.h> |
|
32 #include <linux/interrupt.h> |
|
33 #include <linux/ethtool.h> |
|
34 #include <linux/pci.h> |
|
35 #include <linux/slab.h> |
|
36 #include <linux/delay.h> |
|
37 #include <linux/vmalloc.h> |
|
38 #include <linux/pm_runtime.h> |
|
39 |
|
40 #include "e1000.h" |
|
41 |
|
42 enum {NETDEV_STATS, E1000_STATS}; |
|
43 |
|
44 struct e1000_stats { |
|
45 char stat_string[ETH_GSTRING_LEN]; |
|
46 int type; |
|
47 int sizeof_stat; |
|
48 int stat_offset; |
|
49 }; |
|
50 |
|
51 #define E1000_STAT(str, m) { \ |
|
52 .stat_string = str, \ |
|
53 .type = E1000_STATS, \ |
|
54 .sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \ |
|
55 .stat_offset = offsetof(struct e1000_adapter, m) } |
|
56 #define E1000_NETDEV_STAT(str, m) { \ |
|
57 .stat_string = str, \ |
|
58 .type = NETDEV_STATS, \ |
|
59 .sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \ |
|
60 .stat_offset = offsetof(struct rtnl_link_stats64, m) } |
|
61 |
|
62 static const struct e1000_stats e1000_gstrings_stats[] = { |
|
63 E1000_STAT("rx_packets", stats.gprc), |
|
64 E1000_STAT("tx_packets", stats.gptc), |
|
65 E1000_STAT("rx_bytes", stats.gorc), |
|
66 E1000_STAT("tx_bytes", stats.gotc), |
|
67 E1000_STAT("rx_broadcast", stats.bprc), |
|
68 E1000_STAT("tx_broadcast", stats.bptc), |
|
69 E1000_STAT("rx_multicast", stats.mprc), |
|
70 E1000_STAT("tx_multicast", stats.mptc), |
|
71 E1000_NETDEV_STAT("rx_errors", rx_errors), |
|
72 E1000_NETDEV_STAT("tx_errors", tx_errors), |
|
73 E1000_NETDEV_STAT("tx_dropped", tx_dropped), |
|
74 E1000_STAT("multicast", stats.mprc), |
|
75 E1000_STAT("collisions", stats.colc), |
|
76 E1000_NETDEV_STAT("rx_length_errors", rx_length_errors), |
|
77 E1000_NETDEV_STAT("rx_over_errors", rx_over_errors), |
|
78 E1000_STAT("rx_crc_errors", stats.crcerrs), |
|
79 E1000_NETDEV_STAT("rx_frame_errors", rx_frame_errors), |
|
80 E1000_STAT("rx_no_buffer_count", stats.rnbc), |
|
81 E1000_STAT("rx_missed_errors", stats.mpc), |
|
82 E1000_STAT("tx_aborted_errors", stats.ecol), |
|
83 E1000_STAT("tx_carrier_errors", stats.tncrs), |
|
84 E1000_NETDEV_STAT("tx_fifo_errors", tx_fifo_errors), |
|
85 E1000_NETDEV_STAT("tx_heartbeat_errors", tx_heartbeat_errors), |
|
86 E1000_STAT("tx_window_errors", stats.latecol), |
|
87 E1000_STAT("tx_abort_late_coll", stats.latecol), |
|
88 E1000_STAT("tx_deferred_ok", stats.dc), |
|
89 E1000_STAT("tx_single_coll_ok", stats.scc), |
|
90 E1000_STAT("tx_multi_coll_ok", stats.mcc), |
|
91 E1000_STAT("tx_timeout_count", tx_timeout_count), |
|
92 E1000_STAT("tx_restart_queue", restart_queue), |
|
93 E1000_STAT("rx_long_length_errors", stats.roc), |
|
94 E1000_STAT("rx_short_length_errors", stats.ruc), |
|
95 E1000_STAT("rx_align_errors", stats.algnerrc), |
|
96 E1000_STAT("tx_tcp_seg_good", stats.tsctc), |
|
97 E1000_STAT("tx_tcp_seg_failed", stats.tsctfc), |
|
98 E1000_STAT("rx_flow_control_xon", stats.xonrxc), |
|
99 E1000_STAT("rx_flow_control_xoff", stats.xoffrxc), |
|
100 E1000_STAT("tx_flow_control_xon", stats.xontxc), |
|
101 E1000_STAT("tx_flow_control_xoff", stats.xofftxc), |
|
102 E1000_STAT("rx_long_byte_count", stats.gorc), |
|
103 E1000_STAT("rx_csum_offload_good", hw_csum_good), |
|
104 E1000_STAT("rx_csum_offload_errors", hw_csum_err), |
|
105 E1000_STAT("rx_header_split", rx_hdr_split), |
|
106 E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed), |
|
107 E1000_STAT("tx_smbus", stats.mgptc), |
|
108 E1000_STAT("rx_smbus", stats.mgprc), |
|
109 E1000_STAT("dropped_smbus", stats.mgpdc), |
|
110 E1000_STAT("rx_dma_failed", rx_dma_failed), |
|
111 E1000_STAT("tx_dma_failed", tx_dma_failed), |
|
112 E1000_STAT("uncorr_ecc_errors", uncorr_errors), |
|
113 E1000_STAT("corr_ecc_errors", corr_errors), |
|
114 }; |
|
115 |
|
116 #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) |
|
117 #define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN) |
|
118 static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { |
|
119 "Register test (offline)", "Eeprom test (offline)", |
|
120 "Interrupt test (offline)", "Loopback test (offline)", |
|
121 "Link test (on/offline)" |
|
122 }; |
|
123 #define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test) |
|
124 |
|
125 static int e1000_get_settings(struct net_device *netdev, |
|
126 struct ethtool_cmd *ecmd) |
|
127 { |
|
128 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
129 struct e1000_hw *hw = &adapter->hw; |
|
130 u32 speed; |
|
131 |
|
132 if (hw->phy.media_type == e1000_media_type_copper) { |
|
133 |
|
134 ecmd->supported = (SUPPORTED_10baseT_Half | |
|
135 SUPPORTED_10baseT_Full | |
|
136 SUPPORTED_100baseT_Half | |
|
137 SUPPORTED_100baseT_Full | |
|
138 SUPPORTED_1000baseT_Full | |
|
139 SUPPORTED_Autoneg | |
|
140 SUPPORTED_TP); |
|
141 if (hw->phy.type == e1000_phy_ife) |
|
142 ecmd->supported &= ~SUPPORTED_1000baseT_Full; |
|
143 ecmd->advertising = ADVERTISED_TP; |
|
144 |
|
145 if (hw->mac.autoneg == 1) { |
|
146 ecmd->advertising |= ADVERTISED_Autoneg; |
|
147 /* the e1000 autoneg seems to match ethtool nicely */ |
|
148 ecmd->advertising |= hw->phy.autoneg_advertised; |
|
149 } |
|
150 |
|
151 ecmd->port = PORT_TP; |
|
152 ecmd->phy_address = hw->phy.addr; |
|
153 ecmd->transceiver = XCVR_INTERNAL; |
|
154 |
|
155 } else { |
|
156 ecmd->supported = (SUPPORTED_1000baseT_Full | |
|
157 SUPPORTED_FIBRE | |
|
158 SUPPORTED_Autoneg); |
|
159 |
|
160 ecmd->advertising = (ADVERTISED_1000baseT_Full | |
|
161 ADVERTISED_FIBRE | |
|
162 ADVERTISED_Autoneg); |
|
163 |
|
164 ecmd->port = PORT_FIBRE; |
|
165 ecmd->transceiver = XCVR_EXTERNAL; |
|
166 } |
|
167 |
|
168 speed = -1; |
|
169 ecmd->duplex = -1; |
|
170 |
|
171 if (netif_running(netdev)) { |
|
172 if (netif_carrier_ok(netdev)) { |
|
173 speed = adapter->link_speed; |
|
174 ecmd->duplex = adapter->link_duplex - 1; |
|
175 } |
|
176 } else { |
|
177 u32 status = er32(STATUS); |
|
178 if (status & E1000_STATUS_LU) { |
|
179 if (status & E1000_STATUS_SPEED_1000) |
|
180 speed = SPEED_1000; |
|
181 else if (status & E1000_STATUS_SPEED_100) |
|
182 speed = SPEED_100; |
|
183 else |
|
184 speed = SPEED_10; |
|
185 |
|
186 if (status & E1000_STATUS_FD) |
|
187 ecmd->duplex = DUPLEX_FULL; |
|
188 else |
|
189 ecmd->duplex = DUPLEX_HALF; |
|
190 } |
|
191 } |
|
192 |
|
193 ethtool_cmd_speed_set(ecmd, speed); |
|
194 ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || |
|
195 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; |
|
196 |
|
197 /* MDI-X => 2; MDI =>1; Invalid =>0 */ |
|
198 if ((hw->phy.media_type == e1000_media_type_copper) && |
|
199 netif_carrier_ok(netdev)) |
|
200 ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : |
|
201 ETH_TP_MDI; |
|
202 else |
|
203 ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; |
|
204 |
|
205 if (hw->phy.mdix == AUTO_ALL_MODES) |
|
206 ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; |
|
207 else |
|
208 ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; |
|
209 |
|
210 return 0; |
|
211 } |
|
212 |
|
213 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) |
|
214 { |
|
215 struct e1000_mac_info *mac = &adapter->hw.mac; |
|
216 |
|
217 mac->autoneg = 0; |
|
218 |
|
219 /* Make sure dplx is at most 1 bit and lsb of speed is not set |
|
220 * for the switch() below to work |
|
221 */ |
|
222 if ((spd & 1) || (dplx & ~1)) |
|
223 goto err_inval; |
|
224 |
|
225 /* Fiber NICs only allow 1000 gbps Full duplex */ |
|
226 if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && |
|
227 spd != SPEED_1000 && |
|
228 dplx != DUPLEX_FULL) { |
|
229 goto err_inval; |
|
230 } |
|
231 |
|
232 switch (spd + dplx) { |
|
233 case SPEED_10 + DUPLEX_HALF: |
|
234 mac->forced_speed_duplex = ADVERTISE_10_HALF; |
|
235 break; |
|
236 case SPEED_10 + DUPLEX_FULL: |
|
237 mac->forced_speed_duplex = ADVERTISE_10_FULL; |
|
238 break; |
|
239 case SPEED_100 + DUPLEX_HALF: |
|
240 mac->forced_speed_duplex = ADVERTISE_100_HALF; |
|
241 break; |
|
242 case SPEED_100 + DUPLEX_FULL: |
|
243 mac->forced_speed_duplex = ADVERTISE_100_FULL; |
|
244 break; |
|
245 case SPEED_1000 + DUPLEX_FULL: |
|
246 mac->autoneg = 1; |
|
247 adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; |
|
248 break; |
|
249 case SPEED_1000 + DUPLEX_HALF: /* not supported */ |
|
250 default: |
|
251 goto err_inval; |
|
252 } |
|
253 |
|
254 /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ |
|
255 adapter->hw.phy.mdix = AUTO_ALL_MODES; |
|
256 |
|
257 return 0; |
|
258 |
|
259 err_inval: |
|
260 e_err("Unsupported Speed/Duplex configuration\n"); |
|
261 return -EINVAL; |
|
262 } |
|
263 |
|
264 static int e1000_set_settings(struct net_device *netdev, |
|
265 struct ethtool_cmd *ecmd) |
|
266 { |
|
267 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
268 struct e1000_hw *hw = &adapter->hw; |
|
269 |
|
270 /* When SoL/IDER sessions are active, autoneg/speed/duplex |
|
271 * cannot be changed |
|
272 */ |
|
273 if (hw->phy.ops.check_reset_block && |
|
274 hw->phy.ops.check_reset_block(hw)) { |
|
275 e_err("Cannot change link characteristics when SoL/IDER is active.\n"); |
|
276 return -EINVAL; |
|
277 } |
|
278 |
|
279 /* MDI setting is only allowed when autoneg enabled because |
|
280 * some hardware doesn't allow MDI setting when speed or |
|
281 * duplex is forced. |
|
282 */ |
|
283 if (ecmd->eth_tp_mdix_ctrl) { |
|
284 if (hw->phy.media_type != e1000_media_type_copper) |
|
285 return -EOPNOTSUPP; |
|
286 |
|
287 if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && |
|
288 (ecmd->autoneg != AUTONEG_ENABLE)) { |
|
289 e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); |
|
290 return -EINVAL; |
|
291 } |
|
292 } |
|
293 |
|
294 while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) |
|
295 usleep_range(1000, 2000); |
|
296 |
|
297 if (ecmd->autoneg == AUTONEG_ENABLE) { |
|
298 hw->mac.autoneg = 1; |
|
299 if (hw->phy.media_type == e1000_media_type_fiber) |
|
300 hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | |
|
301 ADVERTISED_FIBRE | |
|
302 ADVERTISED_Autoneg; |
|
303 else |
|
304 hw->phy.autoneg_advertised = ecmd->advertising | |
|
305 ADVERTISED_TP | |
|
306 ADVERTISED_Autoneg; |
|
307 ecmd->advertising = hw->phy.autoneg_advertised; |
|
308 if (adapter->fc_autoneg) |
|
309 hw->fc.requested_mode = e1000_fc_default; |
|
310 } else { |
|
311 u32 speed = ethtool_cmd_speed(ecmd); |
|
312 /* calling this overrides forced MDI setting */ |
|
313 if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { |
|
314 clear_bit(__E1000_RESETTING, &adapter->state); |
|
315 return -EINVAL; |
|
316 } |
|
317 } |
|
318 |
|
319 /* MDI-X => 2; MDI => 1; Auto => 3 */ |
|
320 if (ecmd->eth_tp_mdix_ctrl) { |
|
321 /* fix up the value for auto (3 => 0) as zero is mapped |
|
322 * internally to auto |
|
323 */ |
|
324 if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) |
|
325 hw->phy.mdix = AUTO_ALL_MODES; |
|
326 else |
|
327 hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; |
|
328 } |
|
329 |
|
330 /* reset the link */ |
|
331 |
|
332 if (netif_running(adapter->netdev)) { |
|
333 e1000e_down(adapter); |
|
334 e1000e_up(adapter); |
|
335 } else |
|
336 e1000e_reset(adapter); |
|
337 |
|
338 clear_bit(__E1000_RESETTING, &adapter->state); |
|
339 return 0; |
|
340 } |
|
341 |
|
342 static void e1000_get_pauseparam(struct net_device *netdev, |
|
343 struct ethtool_pauseparam *pause) |
|
344 { |
|
345 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
346 struct e1000_hw *hw = &adapter->hw; |
|
347 |
|
348 pause->autoneg = |
|
349 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); |
|
350 |
|
351 if (hw->fc.current_mode == e1000_fc_rx_pause) { |
|
352 pause->rx_pause = 1; |
|
353 } else if (hw->fc.current_mode == e1000_fc_tx_pause) { |
|
354 pause->tx_pause = 1; |
|
355 } else if (hw->fc.current_mode == e1000_fc_full) { |
|
356 pause->rx_pause = 1; |
|
357 pause->tx_pause = 1; |
|
358 } |
|
359 } |
|
360 |
|
361 static int e1000_set_pauseparam(struct net_device *netdev, |
|
362 struct ethtool_pauseparam *pause) |
|
363 { |
|
364 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
365 struct e1000_hw *hw = &adapter->hw; |
|
366 int retval = 0; |
|
367 |
|
368 adapter->fc_autoneg = pause->autoneg; |
|
369 |
|
370 while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) |
|
371 usleep_range(1000, 2000); |
|
372 |
|
373 if (adapter->fc_autoneg == AUTONEG_ENABLE) { |
|
374 hw->fc.requested_mode = e1000_fc_default; |
|
375 if (netif_running(adapter->netdev)) { |
|
376 e1000e_down(adapter); |
|
377 e1000e_up(adapter); |
|
378 } else { |
|
379 e1000e_reset(adapter); |
|
380 } |
|
381 } else { |
|
382 if (pause->rx_pause && pause->tx_pause) |
|
383 hw->fc.requested_mode = e1000_fc_full; |
|
384 else if (pause->rx_pause && !pause->tx_pause) |
|
385 hw->fc.requested_mode = e1000_fc_rx_pause; |
|
386 else if (!pause->rx_pause && pause->tx_pause) |
|
387 hw->fc.requested_mode = e1000_fc_tx_pause; |
|
388 else if (!pause->rx_pause && !pause->tx_pause) |
|
389 hw->fc.requested_mode = e1000_fc_none; |
|
390 |
|
391 hw->fc.current_mode = hw->fc.requested_mode; |
|
392 |
|
393 if (hw->phy.media_type == e1000_media_type_fiber) { |
|
394 retval = hw->mac.ops.setup_link(hw); |
|
395 /* implicit goto out */ |
|
396 } else { |
|
397 retval = e1000e_force_mac_fc(hw); |
|
398 if (retval) |
|
399 goto out; |
|
400 e1000e_set_fc_watermarks(hw); |
|
401 } |
|
402 } |
|
403 |
|
404 out: |
|
405 clear_bit(__E1000_RESETTING, &adapter->state); |
|
406 return retval; |
|
407 } |
|
408 |
|
409 static u32 e1000_get_msglevel(struct net_device *netdev) |
|
410 { |
|
411 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
412 return adapter->msg_enable; |
|
413 } |
|
414 |
|
415 static void e1000_set_msglevel(struct net_device *netdev, u32 data) |
|
416 { |
|
417 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
418 adapter->msg_enable = data; |
|
419 } |
|
420 |
|
421 static int e1000_get_regs_len(struct net_device *netdev) |
|
422 { |
|
423 #define E1000_REGS_LEN 32 /* overestimate */ |
|
424 return E1000_REGS_LEN * sizeof(u32); |
|
425 } |
|
426 |
|
427 static void e1000_get_regs(struct net_device *netdev, |
|
428 struct ethtool_regs *regs, void *p) |
|
429 { |
|
430 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
431 struct e1000_hw *hw = &adapter->hw; |
|
432 u32 *regs_buff = p; |
|
433 u16 phy_data; |
|
434 |
|
435 memset(p, 0, E1000_REGS_LEN * sizeof(u32)); |
|
436 |
|
437 regs->version = (1 << 24) | (adapter->pdev->revision << 16) | |
|
438 adapter->pdev->device; |
|
439 |
|
440 regs_buff[0] = er32(CTRL); |
|
441 regs_buff[1] = er32(STATUS); |
|
442 |
|
443 regs_buff[2] = er32(RCTL); |
|
444 regs_buff[3] = er32(RDLEN(0)); |
|
445 regs_buff[4] = er32(RDH(0)); |
|
446 regs_buff[5] = er32(RDT(0)); |
|
447 regs_buff[6] = er32(RDTR); |
|
448 |
|
449 regs_buff[7] = er32(TCTL); |
|
450 regs_buff[8] = er32(TDLEN(0)); |
|
451 regs_buff[9] = er32(TDH(0)); |
|
452 regs_buff[10] = er32(TDT(0)); |
|
453 regs_buff[11] = er32(TIDV); |
|
454 |
|
455 regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ |
|
456 |
|
457 /* ethtool doesn't use anything past this point, so all this |
|
458 * code is likely legacy junk for apps that may or may not exist |
|
459 */ |
|
460 if (hw->phy.type == e1000_phy_m88) { |
|
461 e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); |
|
462 regs_buff[13] = (u32)phy_data; /* cable length */ |
|
463 regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
464 regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
465 regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
466 e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); |
|
467 regs_buff[17] = (u32)phy_data; /* extended 10bt distance */ |
|
468 regs_buff[18] = regs_buff[13]; /* cable polarity */ |
|
469 regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */ |
|
470 regs_buff[20] = regs_buff[17]; /* polarity correction */ |
|
471 /* phy receive errors */ |
|
472 regs_buff[22] = adapter->phy_stats.receive_errors; |
|
473 regs_buff[23] = regs_buff[13]; /* mdix mode */ |
|
474 } |
|
475 regs_buff[21] = 0; /* was idle_errors */ |
|
476 e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); |
|
477 regs_buff[24] = (u32)phy_data; /* phy local receiver status */ |
|
478 regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ |
|
479 } |
|
480 |
|
481 static int e1000_get_eeprom_len(struct net_device *netdev) |
|
482 { |
|
483 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
484 return adapter->hw.nvm.word_size * 2; |
|
485 } |
|
486 |
|
487 static int e1000_get_eeprom(struct net_device *netdev, |
|
488 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
489 { |
|
490 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
491 struct e1000_hw *hw = &adapter->hw; |
|
492 u16 *eeprom_buff; |
|
493 int first_word; |
|
494 int last_word; |
|
495 int ret_val = 0; |
|
496 u16 i; |
|
497 |
|
498 if (eeprom->len == 0) |
|
499 return -EINVAL; |
|
500 |
|
501 eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16); |
|
502 |
|
503 first_word = eeprom->offset >> 1; |
|
504 last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
|
505 |
|
506 eeprom_buff = kmalloc(sizeof(u16) * |
|
507 (last_word - first_word + 1), GFP_KERNEL); |
|
508 if (!eeprom_buff) |
|
509 return -ENOMEM; |
|
510 |
|
511 if (hw->nvm.type == e1000_nvm_eeprom_spi) { |
|
512 ret_val = e1000_read_nvm(hw, first_word, |
|
513 last_word - first_word + 1, |
|
514 eeprom_buff); |
|
515 } else { |
|
516 for (i = 0; i < last_word - first_word + 1; i++) { |
|
517 ret_val = e1000_read_nvm(hw, first_word + i, 1, |
|
518 &eeprom_buff[i]); |
|
519 if (ret_val) |
|
520 break; |
|
521 } |
|
522 } |
|
523 |
|
524 if (ret_val) { |
|
525 /* a read error occurred, throw away the result */ |
|
526 memset(eeprom_buff, 0xff, sizeof(u16) * |
|
527 (last_word - first_word + 1)); |
|
528 } else { |
|
529 /* Device's eeprom is always little-endian, word addressable */ |
|
530 for (i = 0; i < last_word - first_word + 1; i++) |
|
531 le16_to_cpus(&eeprom_buff[i]); |
|
532 } |
|
533 |
|
534 memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); |
|
535 kfree(eeprom_buff); |
|
536 |
|
537 return ret_val; |
|
538 } |
|
539 |
|
540 static int e1000_set_eeprom(struct net_device *netdev, |
|
541 struct ethtool_eeprom *eeprom, u8 *bytes) |
|
542 { |
|
543 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
544 struct e1000_hw *hw = &adapter->hw; |
|
545 u16 *eeprom_buff; |
|
546 void *ptr; |
|
547 int max_len; |
|
548 int first_word; |
|
549 int last_word; |
|
550 int ret_val = 0; |
|
551 u16 i; |
|
552 |
|
553 if (eeprom->len == 0) |
|
554 return -EOPNOTSUPP; |
|
555 |
|
556 if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) |
|
557 return -EFAULT; |
|
558 |
|
559 if (adapter->flags & FLAG_READ_ONLY_NVM) |
|
560 return -EINVAL; |
|
561 |
|
562 max_len = hw->nvm.word_size * 2; |
|
563 |
|
564 first_word = eeprom->offset >> 1; |
|
565 last_word = (eeprom->offset + eeprom->len - 1) >> 1; |
|
566 eeprom_buff = kmalloc(max_len, GFP_KERNEL); |
|
567 if (!eeprom_buff) |
|
568 return -ENOMEM; |
|
569 |
|
570 ptr = (void *)eeprom_buff; |
|
571 |
|
572 if (eeprom->offset & 1) { |
|
573 /* need read/modify/write of first changed EEPROM word */ |
|
574 /* only the second byte of the word is being modified */ |
|
575 ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]); |
|
576 ptr++; |
|
577 } |
|
578 if (((eeprom->offset + eeprom->len) & 1) && (!ret_val)) |
|
579 /* need read/modify/write of last changed EEPROM word */ |
|
580 /* only the first byte of the word is being modified */ |
|
581 ret_val = e1000_read_nvm(hw, last_word, 1, |
|
582 &eeprom_buff[last_word - first_word]); |
|
583 |
|
584 if (ret_val) |
|
585 goto out; |
|
586 |
|
587 /* Device's eeprom is always little-endian, word addressable */ |
|
588 for (i = 0; i < last_word - first_word + 1; i++) |
|
589 le16_to_cpus(&eeprom_buff[i]); |
|
590 |
|
591 memcpy(ptr, bytes, eeprom->len); |
|
592 |
|
593 for (i = 0; i < last_word - first_word + 1; i++) |
|
594 cpu_to_le16s(&eeprom_buff[i]); |
|
595 |
|
596 ret_val = e1000_write_nvm(hw, first_word, |
|
597 last_word - first_word + 1, eeprom_buff); |
|
598 |
|
599 if (ret_val) |
|
600 goto out; |
|
601 |
|
602 /* Update the checksum over the first part of the EEPROM if needed |
|
603 * and flush shadow RAM for applicable controllers |
|
604 */ |
|
605 if ((first_word <= NVM_CHECKSUM_REG) || |
|
606 (hw->mac.type == e1000_82583) || |
|
607 (hw->mac.type == e1000_82574) || |
|
608 (hw->mac.type == e1000_82573)) |
|
609 ret_val = e1000e_update_nvm_checksum(hw); |
|
610 |
|
611 out: |
|
612 kfree(eeprom_buff); |
|
613 return ret_val; |
|
614 } |
|
615 |
|
616 static void e1000_get_drvinfo(struct net_device *netdev, |
|
617 struct ethtool_drvinfo *drvinfo) |
|
618 { |
|
619 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
620 |
|
621 strlcpy(drvinfo->driver, e1000e_driver_name, |
|
622 sizeof(drvinfo->driver)); |
|
623 strlcpy(drvinfo->version, e1000e_driver_version, |
|
624 sizeof(drvinfo->version)); |
|
625 |
|
626 /* EEPROM image version # is reported as firmware version # for |
|
627 * PCI-E controllers |
|
628 */ |
|
629 snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), |
|
630 "%d.%d-%d", |
|
631 (adapter->eeprom_vers & 0xF000) >> 12, |
|
632 (adapter->eeprom_vers & 0x0FF0) >> 4, |
|
633 (adapter->eeprom_vers & 0x000F)); |
|
634 |
|
635 strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), |
|
636 sizeof(drvinfo->bus_info)); |
|
637 drvinfo->regdump_len = e1000_get_regs_len(netdev); |
|
638 drvinfo->eedump_len = e1000_get_eeprom_len(netdev); |
|
639 } |
|
640 |
|
641 static void e1000_get_ringparam(struct net_device *netdev, |
|
642 struct ethtool_ringparam *ring) |
|
643 { |
|
644 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
645 |
|
646 ring->rx_max_pending = E1000_MAX_RXD; |
|
647 ring->tx_max_pending = E1000_MAX_TXD; |
|
648 ring->rx_pending = adapter->rx_ring_count; |
|
649 ring->tx_pending = adapter->tx_ring_count; |
|
650 } |
|
651 |
|
652 static int e1000_set_ringparam(struct net_device *netdev, |
|
653 struct ethtool_ringparam *ring) |
|
654 { |
|
655 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
656 struct e1000_ring *temp_tx = NULL, *temp_rx = NULL; |
|
657 int err = 0, size = sizeof(struct e1000_ring); |
|
658 bool set_tx = false, set_rx = false; |
|
659 u16 new_rx_count, new_tx_count; |
|
660 |
|
661 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) |
|
662 return -EINVAL; |
|
663 |
|
664 new_rx_count = clamp_t(u32, ring->rx_pending, E1000_MIN_RXD, |
|
665 E1000_MAX_RXD); |
|
666 new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); |
|
667 |
|
668 new_tx_count = clamp_t(u32, ring->tx_pending, E1000_MIN_TXD, |
|
669 E1000_MAX_TXD); |
|
670 new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); |
|
671 |
|
672 if ((new_tx_count == adapter->tx_ring_count) && |
|
673 (new_rx_count == adapter->rx_ring_count)) |
|
674 /* nothing to do */ |
|
675 return 0; |
|
676 |
|
677 while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) |
|
678 usleep_range(1000, 2000); |
|
679 |
|
680 if (!netif_running(adapter->netdev)) { |
|
681 /* Set counts now and allocate resources during open() */ |
|
682 adapter->tx_ring->count = new_tx_count; |
|
683 adapter->rx_ring->count = new_rx_count; |
|
684 adapter->tx_ring_count = new_tx_count; |
|
685 adapter->rx_ring_count = new_rx_count; |
|
686 goto clear_reset; |
|
687 } |
|
688 |
|
689 set_tx = (new_tx_count != adapter->tx_ring_count); |
|
690 set_rx = (new_rx_count != adapter->rx_ring_count); |
|
691 |
|
692 /* Allocate temporary storage for ring updates */ |
|
693 if (set_tx) { |
|
694 temp_tx = vmalloc(size); |
|
695 if (!temp_tx) { |
|
696 err = -ENOMEM; |
|
697 goto free_temp; |
|
698 } |
|
699 } |
|
700 if (set_rx) { |
|
701 temp_rx = vmalloc(size); |
|
702 if (!temp_rx) { |
|
703 err = -ENOMEM; |
|
704 goto free_temp; |
|
705 } |
|
706 } |
|
707 |
|
708 e1000e_down(adapter); |
|
709 |
|
710 /* We can't just free everything and then setup again, because the |
|
711 * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring |
|
712 * structs. First, attempt to allocate new resources... |
|
713 */ |
|
714 if (set_tx) { |
|
715 memcpy(temp_tx, adapter->tx_ring, size); |
|
716 temp_tx->count = new_tx_count; |
|
717 err = e1000e_setup_tx_resources(temp_tx); |
|
718 if (err) |
|
719 goto err_setup; |
|
720 } |
|
721 if (set_rx) { |
|
722 memcpy(temp_rx, adapter->rx_ring, size); |
|
723 temp_rx->count = new_rx_count; |
|
724 err = e1000e_setup_rx_resources(temp_rx); |
|
725 if (err) |
|
726 goto err_setup_rx; |
|
727 } |
|
728 |
|
729 /* ...then free the old resources and copy back any new ring data */ |
|
730 if (set_tx) { |
|
731 e1000e_free_tx_resources(adapter->tx_ring); |
|
732 memcpy(adapter->tx_ring, temp_tx, size); |
|
733 adapter->tx_ring_count = new_tx_count; |
|
734 } |
|
735 if (set_rx) { |
|
736 e1000e_free_rx_resources(adapter->rx_ring); |
|
737 memcpy(adapter->rx_ring, temp_rx, size); |
|
738 adapter->rx_ring_count = new_rx_count; |
|
739 } |
|
740 |
|
741 err_setup_rx: |
|
742 if (err && set_tx) |
|
743 e1000e_free_tx_resources(temp_tx); |
|
744 err_setup: |
|
745 e1000e_up(adapter); |
|
746 free_temp: |
|
747 vfree(temp_tx); |
|
748 vfree(temp_rx); |
|
749 clear_reset: |
|
750 clear_bit(__E1000_RESETTING, &adapter->state); |
|
751 return err; |
|
752 } |
|
753 |
|
754 static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, |
|
755 int reg, int offset, u32 mask, u32 write) |
|
756 { |
|
757 u32 pat, val; |
|
758 static const u32 test[] = { |
|
759 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; |
|
760 for (pat = 0; pat < ARRAY_SIZE(test); pat++) { |
|
761 E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset, |
|
762 (test[pat] & write)); |
|
763 val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); |
|
764 if (val != (test[pat] & write & mask)) { |
|
765 e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", |
|
766 reg + offset, val, (test[pat] & write & mask)); |
|
767 *data = reg; |
|
768 return 1; |
|
769 } |
|
770 } |
|
771 return 0; |
|
772 } |
|
773 |
|
774 static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, |
|
775 int reg, u32 mask, u32 write) |
|
776 { |
|
777 u32 val; |
|
778 __ew32(&adapter->hw, reg, write & mask); |
|
779 val = __er32(&adapter->hw, reg); |
|
780 if ((write & mask) != (val & mask)) { |
|
781 e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", |
|
782 reg, (val & mask), (write & mask)); |
|
783 *data = reg; |
|
784 return 1; |
|
785 } |
|
786 return 0; |
|
787 } |
|
788 #define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \ |
|
789 do { \ |
|
790 if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \ |
|
791 return 1; \ |
|
792 } while (0) |
|
793 #define REG_PATTERN_TEST(reg, mask, write) \ |
|
794 REG_PATTERN_TEST_ARRAY(reg, 0, mask, write) |
|
795 |
|
796 #define REG_SET_AND_CHECK(reg, mask, write) \ |
|
797 do { \ |
|
798 if (reg_set_and_check(adapter, data, reg, mask, write)) \ |
|
799 return 1; \ |
|
800 } while (0) |
|
801 |
|
802 static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) |
|
803 { |
|
804 struct e1000_hw *hw = &adapter->hw; |
|
805 struct e1000_mac_info *mac = &adapter->hw.mac; |
|
806 u32 value; |
|
807 u32 before; |
|
808 u32 after; |
|
809 u32 i; |
|
810 u32 toggle; |
|
811 u32 mask; |
|
812 u32 wlock_mac = 0; |
|
813 |
|
814 /* The status register is Read Only, so a write should fail. |
|
815 * Some bits that get toggled are ignored. |
|
816 */ |
|
817 switch (mac->type) { |
|
818 /* there are several bits on newer hardware that are r/w */ |
|
819 case e1000_82571: |
|
820 case e1000_82572: |
|
821 case e1000_80003es2lan: |
|
822 toggle = 0x7FFFF3FF; |
|
823 break; |
|
824 default: |
|
825 toggle = 0x7FFFF033; |
|
826 break; |
|
827 } |
|
828 |
|
829 before = er32(STATUS); |
|
830 value = (er32(STATUS) & toggle); |
|
831 ew32(STATUS, toggle); |
|
832 after = er32(STATUS) & toggle; |
|
833 if (value != after) { |
|
834 e_err("failed STATUS register test got: 0x%08X expected: 0x%08X\n", |
|
835 after, value); |
|
836 *data = 1; |
|
837 return 1; |
|
838 } |
|
839 /* restore previous status */ |
|
840 ew32(STATUS, before); |
|
841 |
|
842 if (!(adapter->flags & FLAG_IS_ICH)) { |
|
843 REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF); |
|
844 REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF); |
|
845 REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF); |
|
846 REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF); |
|
847 } |
|
848 |
|
849 REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF); |
|
850 REG_PATTERN_TEST(E1000_RDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF); |
|
851 REG_PATTERN_TEST(E1000_RDLEN(0), 0x000FFF80, 0x000FFFFF); |
|
852 REG_PATTERN_TEST(E1000_RDH(0), 0x0000FFFF, 0x0000FFFF); |
|
853 REG_PATTERN_TEST(E1000_RDT(0), 0x0000FFFF, 0x0000FFFF); |
|
854 REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8); |
|
855 REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF); |
|
856 REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF); |
|
857 REG_PATTERN_TEST(E1000_TDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF); |
|
858 REG_PATTERN_TEST(E1000_TDLEN(0), 0x000FFF80, 0x000FFFFF); |
|
859 |
|
860 REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000); |
|
861 |
|
862 before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE); |
|
863 REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB); |
|
864 REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000); |
|
865 |
|
866 REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF); |
|
867 REG_PATTERN_TEST(E1000_RDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF); |
|
868 if (!(adapter->flags & FLAG_IS_ICH)) |
|
869 REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF); |
|
870 REG_PATTERN_TEST(E1000_TDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF); |
|
871 REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF); |
|
872 mask = 0x8003FFFF; |
|
873 switch (mac->type) { |
|
874 case e1000_ich10lan: |
|
875 case e1000_pchlan: |
|
876 case e1000_pch2lan: |
|
877 case e1000_pch_lpt: |
|
878 mask |= (1 << 18); |
|
879 break; |
|
880 default: |
|
881 break; |
|
882 } |
|
883 |
|
884 if (mac->type == e1000_pch_lpt) |
|
885 wlock_mac = (er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK) >> |
|
886 E1000_FWSM_WLOCK_MAC_SHIFT; |
|
887 |
|
888 for (i = 0; i < mac->rar_entry_count; i++) { |
|
889 /* Cannot test write-protected SHRAL[n] registers */ |
|
890 if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) |
|
891 continue; |
|
892 |
|
893 REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), |
|
894 mask, 0xFFFFFFFF); |
|
895 } |
|
896 |
|
897 for (i = 0; i < mac->mta_reg_count; i++) |
|
898 REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF); |
|
899 |
|
900 *data = 0; |
|
901 |
|
902 return 0; |
|
903 } |
|
904 |
|
905 static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) |
|
906 { |
|
907 u16 temp; |
|
908 u16 checksum = 0; |
|
909 u16 i; |
|
910 |
|
911 *data = 0; |
|
912 /* Read and add up the contents of the EEPROM */ |
|
913 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { |
|
914 if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) { |
|
915 *data = 1; |
|
916 return *data; |
|
917 } |
|
918 checksum += temp; |
|
919 } |
|
920 |
|
921 /* If Checksum is not Correct return error else test passed */ |
|
922 if ((checksum != (u16) NVM_SUM) && !(*data)) |
|
923 *data = 2; |
|
924 |
|
925 return *data; |
|
926 } |
|
927 |
|
928 static irqreturn_t e1000_test_intr(int irq, void *data) |
|
929 { |
|
930 struct net_device *netdev = (struct net_device *) data; |
|
931 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
932 struct e1000_hw *hw = &adapter->hw; |
|
933 |
|
934 adapter->test_icr |= er32(ICR); |
|
935 |
|
936 return IRQ_HANDLED; |
|
937 } |
|
938 |
|
939 static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) |
|
940 { |
|
941 struct net_device *netdev = adapter->netdev; |
|
942 struct e1000_hw *hw = &adapter->hw; |
|
943 u32 mask; |
|
944 u32 shared_int = 1; |
|
945 u32 irq = adapter->pdev->irq; |
|
946 int i; |
|
947 int ret_val = 0; |
|
948 int int_mode = E1000E_INT_MODE_LEGACY; |
|
949 |
|
950 *data = 0; |
|
951 |
|
952 /* NOTE: we don't test MSI/MSI-X interrupts here, yet */ |
|
953 if (adapter->int_mode == E1000E_INT_MODE_MSIX) { |
|
954 int_mode = adapter->int_mode; |
|
955 e1000e_reset_interrupt_capability(adapter); |
|
956 adapter->int_mode = E1000E_INT_MODE_LEGACY; |
|
957 e1000e_set_interrupt_capability(adapter); |
|
958 } |
|
959 /* Hook up test interrupt handler just for this test */ |
|
960 if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, |
|
961 netdev)) { |
|
962 shared_int = 0; |
|
963 } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, |
|
964 netdev->name, netdev)) { |
|
965 *data = 1; |
|
966 ret_val = -1; |
|
967 goto out; |
|
968 } |
|
969 e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); |
|
970 |
|
971 /* Disable all the interrupts */ |
|
972 ew32(IMC, 0xFFFFFFFF); |
|
973 e1e_flush(); |
|
974 usleep_range(10000, 20000); |
|
975 |
|
976 /* Test each interrupt */ |
|
977 for (i = 0; i < 10; i++) { |
|
978 /* Interrupt to test */ |
|
979 mask = 1 << i; |
|
980 |
|
981 if (adapter->flags & FLAG_IS_ICH) { |
|
982 switch (mask) { |
|
983 case E1000_ICR_RXSEQ: |
|
984 continue; |
|
985 case 0x00000100: |
|
986 if (adapter->hw.mac.type == e1000_ich8lan || |
|
987 adapter->hw.mac.type == e1000_ich9lan) |
|
988 continue; |
|
989 break; |
|
990 default: |
|
991 break; |
|
992 } |
|
993 } |
|
994 |
|
995 if (!shared_int) { |
|
996 /* Disable the interrupt to be reported in |
|
997 * the cause register and then force the same |
|
998 * interrupt and see if one gets posted. If |
|
999 * an interrupt was posted to the bus, the |
|
1000 * test failed. |
|
1001 */ |
|
1002 adapter->test_icr = 0; |
|
1003 ew32(IMC, mask); |
|
1004 ew32(ICS, mask); |
|
1005 e1e_flush(); |
|
1006 usleep_range(10000, 20000); |
|
1007 |
|
1008 if (adapter->test_icr & mask) { |
|
1009 *data = 3; |
|
1010 break; |
|
1011 } |
|
1012 } |
|
1013 |
|
1014 /* Enable the interrupt to be reported in |
|
1015 * the cause register and then force the same |
|
1016 * interrupt and see if one gets posted. If |
|
1017 * an interrupt was not posted to the bus, the |
|
1018 * test failed. |
|
1019 */ |
|
1020 adapter->test_icr = 0; |
|
1021 ew32(IMS, mask); |
|
1022 ew32(ICS, mask); |
|
1023 e1e_flush(); |
|
1024 usleep_range(10000, 20000); |
|
1025 |
|
1026 if (!(adapter->test_icr & mask)) { |
|
1027 *data = 4; |
|
1028 break; |
|
1029 } |
|
1030 |
|
1031 if (!shared_int) { |
|
1032 /* Disable the other interrupts to be reported in |
|
1033 * the cause register and then force the other |
|
1034 * interrupts and see if any get posted. If |
|
1035 * an interrupt was posted to the bus, the |
|
1036 * test failed. |
|
1037 */ |
|
1038 adapter->test_icr = 0; |
|
1039 ew32(IMC, ~mask & 0x00007FFF); |
|
1040 ew32(ICS, ~mask & 0x00007FFF); |
|
1041 e1e_flush(); |
|
1042 usleep_range(10000, 20000); |
|
1043 |
|
1044 if (adapter->test_icr) { |
|
1045 *data = 5; |
|
1046 break; |
|
1047 } |
|
1048 } |
|
1049 } |
|
1050 |
|
1051 /* Disable all the interrupts */ |
|
1052 ew32(IMC, 0xFFFFFFFF); |
|
1053 e1e_flush(); |
|
1054 usleep_range(10000, 20000); |
|
1055 |
|
1056 /* Unhook test interrupt handler */ |
|
1057 free_irq(irq, netdev); |
|
1058 |
|
1059 out: |
|
1060 if (int_mode == E1000E_INT_MODE_MSIX) { |
|
1061 e1000e_reset_interrupt_capability(adapter); |
|
1062 adapter->int_mode = int_mode; |
|
1063 e1000e_set_interrupt_capability(adapter); |
|
1064 } |
|
1065 |
|
1066 return ret_val; |
|
1067 } |
|
1068 |
|
1069 static void e1000_free_desc_rings(struct e1000_adapter *adapter) |
|
1070 { |
|
1071 struct e1000_ring *tx_ring = &adapter->test_tx_ring; |
|
1072 struct e1000_ring *rx_ring = &adapter->test_rx_ring; |
|
1073 struct pci_dev *pdev = adapter->pdev; |
|
1074 int i; |
|
1075 |
|
1076 if (tx_ring->desc && tx_ring->buffer_info) { |
|
1077 for (i = 0; i < tx_ring->count; i++) { |
|
1078 if (tx_ring->buffer_info[i].dma) |
|
1079 dma_unmap_single(&pdev->dev, |
|
1080 tx_ring->buffer_info[i].dma, |
|
1081 tx_ring->buffer_info[i].length, |
|
1082 DMA_TO_DEVICE); |
|
1083 if (tx_ring->buffer_info[i].skb) |
|
1084 dev_kfree_skb(tx_ring->buffer_info[i].skb); |
|
1085 } |
|
1086 } |
|
1087 |
|
1088 if (rx_ring->desc && rx_ring->buffer_info) { |
|
1089 for (i = 0; i < rx_ring->count; i++) { |
|
1090 if (rx_ring->buffer_info[i].dma) |
|
1091 dma_unmap_single(&pdev->dev, |
|
1092 rx_ring->buffer_info[i].dma, |
|
1093 2048, DMA_FROM_DEVICE); |
|
1094 if (rx_ring->buffer_info[i].skb) |
|
1095 dev_kfree_skb(rx_ring->buffer_info[i].skb); |
|
1096 } |
|
1097 } |
|
1098 |
|
1099 if (tx_ring->desc) { |
|
1100 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, |
|
1101 tx_ring->dma); |
|
1102 tx_ring->desc = NULL; |
|
1103 } |
|
1104 if (rx_ring->desc) { |
|
1105 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, |
|
1106 rx_ring->dma); |
|
1107 rx_ring->desc = NULL; |
|
1108 } |
|
1109 |
|
1110 kfree(tx_ring->buffer_info); |
|
1111 tx_ring->buffer_info = NULL; |
|
1112 kfree(rx_ring->buffer_info); |
|
1113 rx_ring->buffer_info = NULL; |
|
1114 } |
|
1115 |
|
1116 static int e1000_setup_desc_rings(struct e1000_adapter *adapter) |
|
1117 { |
|
1118 struct e1000_ring *tx_ring = &adapter->test_tx_ring; |
|
1119 struct e1000_ring *rx_ring = &adapter->test_rx_ring; |
|
1120 struct pci_dev *pdev = adapter->pdev; |
|
1121 struct e1000_hw *hw = &adapter->hw; |
|
1122 u32 rctl; |
|
1123 int i; |
|
1124 int ret_val; |
|
1125 |
|
1126 /* Setup Tx descriptor ring and Tx buffers */ |
|
1127 |
|
1128 if (!tx_ring->count) |
|
1129 tx_ring->count = E1000_DEFAULT_TXD; |
|
1130 |
|
1131 tx_ring->buffer_info = kcalloc(tx_ring->count, |
|
1132 sizeof(struct e1000_buffer), |
|
1133 GFP_KERNEL); |
|
1134 if (!tx_ring->buffer_info) { |
|
1135 ret_val = 1; |
|
1136 goto err_nomem; |
|
1137 } |
|
1138 |
|
1139 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); |
|
1140 tx_ring->size = ALIGN(tx_ring->size, 4096); |
|
1141 tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, |
|
1142 &tx_ring->dma, GFP_KERNEL); |
|
1143 if (!tx_ring->desc) { |
|
1144 ret_val = 2; |
|
1145 goto err_nomem; |
|
1146 } |
|
1147 tx_ring->next_to_use = 0; |
|
1148 tx_ring->next_to_clean = 0; |
|
1149 |
|
1150 ew32(TDBAL(0), ((u64) tx_ring->dma & 0x00000000FFFFFFFF)); |
|
1151 ew32(TDBAH(0), ((u64) tx_ring->dma >> 32)); |
|
1152 ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc)); |
|
1153 ew32(TDH(0), 0); |
|
1154 ew32(TDT(0), 0); |
|
1155 ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR | |
|
1156 E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | |
|
1157 E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT); |
|
1158 |
|
1159 for (i = 0; i < tx_ring->count; i++) { |
|
1160 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); |
|
1161 struct sk_buff *skb; |
|
1162 unsigned int skb_size = 1024; |
|
1163 |
|
1164 skb = alloc_skb(skb_size, GFP_KERNEL); |
|
1165 if (!skb) { |
|
1166 ret_val = 3; |
|
1167 goto err_nomem; |
|
1168 } |
|
1169 skb_put(skb, skb_size); |
|
1170 tx_ring->buffer_info[i].skb = skb; |
|
1171 tx_ring->buffer_info[i].length = skb->len; |
|
1172 tx_ring->buffer_info[i].dma = |
|
1173 dma_map_single(&pdev->dev, skb->data, skb->len, |
|
1174 DMA_TO_DEVICE); |
|
1175 if (dma_mapping_error(&pdev->dev, |
|
1176 tx_ring->buffer_info[i].dma)) { |
|
1177 ret_val = 4; |
|
1178 goto err_nomem; |
|
1179 } |
|
1180 tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma); |
|
1181 tx_desc->lower.data = cpu_to_le32(skb->len); |
|
1182 tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | |
|
1183 E1000_TXD_CMD_IFCS | |
|
1184 E1000_TXD_CMD_RS); |
|
1185 tx_desc->upper.data = 0; |
|
1186 } |
|
1187 |
|
1188 /* Setup Rx descriptor ring and Rx buffers */ |
|
1189 |
|
1190 if (!rx_ring->count) |
|
1191 rx_ring->count = E1000_DEFAULT_RXD; |
|
1192 |
|
1193 rx_ring->buffer_info = kcalloc(rx_ring->count, |
|
1194 sizeof(struct e1000_buffer), |
|
1195 GFP_KERNEL); |
|
1196 if (!rx_ring->buffer_info) { |
|
1197 ret_val = 5; |
|
1198 goto err_nomem; |
|
1199 } |
|
1200 |
|
1201 rx_ring->size = rx_ring->count * sizeof(union e1000_rx_desc_extended); |
|
1202 rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, |
|
1203 &rx_ring->dma, GFP_KERNEL); |
|
1204 if (!rx_ring->desc) { |
|
1205 ret_val = 6; |
|
1206 goto err_nomem; |
|
1207 } |
|
1208 rx_ring->next_to_use = 0; |
|
1209 rx_ring->next_to_clean = 0; |
|
1210 |
|
1211 rctl = er32(RCTL); |
|
1212 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX)) |
|
1213 ew32(RCTL, rctl & ~E1000_RCTL_EN); |
|
1214 ew32(RDBAL(0), ((u64) rx_ring->dma & 0xFFFFFFFF)); |
|
1215 ew32(RDBAH(0), ((u64) rx_ring->dma >> 32)); |
|
1216 ew32(RDLEN(0), rx_ring->size); |
|
1217 ew32(RDH(0), 0); |
|
1218 ew32(RDT(0), 0); |
|
1219 rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | |
|
1220 E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE | |
|
1221 E1000_RCTL_SBP | E1000_RCTL_SECRC | |
|
1222 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | |
|
1223 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); |
|
1224 ew32(RCTL, rctl); |
|
1225 |
|
1226 for (i = 0; i < rx_ring->count; i++) { |
|
1227 union e1000_rx_desc_extended *rx_desc; |
|
1228 struct sk_buff *skb; |
|
1229 |
|
1230 skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL); |
|
1231 if (!skb) { |
|
1232 ret_val = 7; |
|
1233 goto err_nomem; |
|
1234 } |
|
1235 skb_reserve(skb, NET_IP_ALIGN); |
|
1236 rx_ring->buffer_info[i].skb = skb; |
|
1237 rx_ring->buffer_info[i].dma = |
|
1238 dma_map_single(&pdev->dev, skb->data, 2048, |
|
1239 DMA_FROM_DEVICE); |
|
1240 if (dma_mapping_error(&pdev->dev, |
|
1241 rx_ring->buffer_info[i].dma)) { |
|
1242 ret_val = 8; |
|
1243 goto err_nomem; |
|
1244 } |
|
1245 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); |
|
1246 rx_desc->read.buffer_addr = |
|
1247 cpu_to_le64(rx_ring->buffer_info[i].dma); |
|
1248 memset(skb->data, 0x00, skb->len); |
|
1249 } |
|
1250 |
|
1251 return 0; |
|
1252 |
|
1253 err_nomem: |
|
1254 e1000_free_desc_rings(adapter); |
|
1255 return ret_val; |
|
1256 } |
|
1257 |
|
1258 static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) |
|
1259 { |
|
1260 /* Write out to PHY registers 29 and 30 to disable the Receiver. */ |
|
1261 e1e_wphy(&adapter->hw, 29, 0x001F); |
|
1262 e1e_wphy(&adapter->hw, 30, 0x8FFC); |
|
1263 e1e_wphy(&adapter->hw, 29, 0x001A); |
|
1264 e1e_wphy(&adapter->hw, 30, 0x8FF0); |
|
1265 } |
|
1266 |
|
1267 static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) |
|
1268 { |
|
1269 struct e1000_hw *hw = &adapter->hw; |
|
1270 u32 ctrl_reg = 0; |
|
1271 u16 phy_reg = 0; |
|
1272 s32 ret_val = 0; |
|
1273 |
|
1274 hw->mac.autoneg = 0; |
|
1275 |
|
1276 if (hw->phy.type == e1000_phy_ife) { |
|
1277 /* force 100, set loopback */ |
|
1278 e1e_wphy(hw, PHY_CONTROL, 0x6100); |
|
1279 |
|
1280 /* Now set up the MAC to the same speed/duplex as the PHY. */ |
|
1281 ctrl_reg = er32(CTRL); |
|
1282 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ |
|
1283 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ |
|
1284 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ |
|
1285 E1000_CTRL_SPD_100 |/* Force Speed to 100 */ |
|
1286 E1000_CTRL_FD); /* Force Duplex to FULL */ |
|
1287 |
|
1288 ew32(CTRL, ctrl_reg); |
|
1289 e1e_flush(); |
|
1290 udelay(500); |
|
1291 |
|
1292 return 0; |
|
1293 } |
|
1294 |
|
1295 /* Specific PHY configuration for loopback */ |
|
1296 switch (hw->phy.type) { |
|
1297 case e1000_phy_m88: |
|
1298 /* Auto-MDI/MDIX Off */ |
|
1299 e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); |
|
1300 /* reset to update Auto-MDI/MDIX */ |
|
1301 e1e_wphy(hw, PHY_CONTROL, 0x9140); |
|
1302 /* autoneg off */ |
|
1303 e1e_wphy(hw, PHY_CONTROL, 0x8140); |
|
1304 break; |
|
1305 case e1000_phy_gg82563: |
|
1306 e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); |
|
1307 break; |
|
1308 case e1000_phy_bm: |
|
1309 /* Set Default MAC Interface speed to 1GB */ |
|
1310 e1e_rphy(hw, PHY_REG(2, 21), &phy_reg); |
|
1311 phy_reg &= ~0x0007; |
|
1312 phy_reg |= 0x006; |
|
1313 e1e_wphy(hw, PHY_REG(2, 21), phy_reg); |
|
1314 /* Assert SW reset for above settings to take effect */ |
|
1315 e1000e_commit_phy(hw); |
|
1316 mdelay(1); |
|
1317 /* Force Full Duplex */ |
|
1318 e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); |
|
1319 e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C); |
|
1320 /* Set Link Up (in force link) */ |
|
1321 e1e_rphy(hw, PHY_REG(776, 16), &phy_reg); |
|
1322 e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040); |
|
1323 /* Force Link */ |
|
1324 e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); |
|
1325 e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040); |
|
1326 /* Set Early Link Enable */ |
|
1327 e1e_rphy(hw, PHY_REG(769, 20), &phy_reg); |
|
1328 e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400); |
|
1329 break; |
|
1330 case e1000_phy_82577: |
|
1331 case e1000_phy_82578: |
|
1332 /* Workaround: K1 must be disabled for stable 1Gbps operation */ |
|
1333 ret_val = hw->phy.ops.acquire(hw); |
|
1334 if (ret_val) { |
|
1335 e_err("Cannot setup 1Gbps loopback.\n"); |
|
1336 return ret_val; |
|
1337 } |
|
1338 e1000_configure_k1_ich8lan(hw, false); |
|
1339 hw->phy.ops.release(hw); |
|
1340 break; |
|
1341 case e1000_phy_82579: |
|
1342 /* Disable PHY energy detect power down */ |
|
1343 e1e_rphy(hw, PHY_REG(0, 21), &phy_reg); |
|
1344 e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3)); |
|
1345 /* Disable full chip energy detect */ |
|
1346 e1e_rphy(hw, PHY_REG(776, 18), &phy_reg); |
|
1347 e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1); |
|
1348 /* Enable loopback on the PHY */ |
|
1349 #define I82577_PHY_LBK_CTRL 19 |
|
1350 e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001); |
|
1351 break; |
|
1352 default: |
|
1353 break; |
|
1354 } |
|
1355 |
|
1356 /* force 1000, set loopback */ |
|
1357 e1e_wphy(hw, PHY_CONTROL, 0x4140); |
|
1358 mdelay(250); |
|
1359 |
|
1360 /* Now set up the MAC to the same speed/duplex as the PHY. */ |
|
1361 ctrl_reg = er32(CTRL); |
|
1362 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ |
|
1363 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ |
|
1364 E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ |
|
1365 E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ |
|
1366 E1000_CTRL_FD); /* Force Duplex to FULL */ |
|
1367 |
|
1368 if (adapter->flags & FLAG_IS_ICH) |
|
1369 ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */ |
|
1370 |
|
1371 if (hw->phy.media_type == e1000_media_type_copper && |
|
1372 hw->phy.type == e1000_phy_m88) { |
|
1373 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ |
|
1374 } else { |
|
1375 /* Set the ILOS bit on the fiber Nic if half duplex link is |
|
1376 * detected. |
|
1377 */ |
|
1378 if ((er32(STATUS) & E1000_STATUS_FD) == 0) |
|
1379 ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); |
|
1380 } |
|
1381 |
|
1382 ew32(CTRL, ctrl_reg); |
|
1383 |
|
1384 /* Disable the receiver on the PHY so when a cable is plugged in, the |
|
1385 * PHY does not begin to autoneg when a cable is reconnected to the NIC. |
|
1386 */ |
|
1387 if (hw->phy.type == e1000_phy_m88) |
|
1388 e1000_phy_disable_receiver(adapter); |
|
1389 |
|
1390 udelay(500); |
|
1391 |
|
1392 return 0; |
|
1393 } |
|
1394 |
|
1395 static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) |
|
1396 { |
|
1397 struct e1000_hw *hw = &adapter->hw; |
|
1398 u32 ctrl = er32(CTRL); |
|
1399 int link = 0; |
|
1400 |
|
1401 /* special requirements for 82571/82572 fiber adapters */ |
|
1402 |
|
1403 /* jump through hoops to make sure link is up because serdes |
|
1404 * link is hardwired up |
|
1405 */ |
|
1406 ctrl |= E1000_CTRL_SLU; |
|
1407 ew32(CTRL, ctrl); |
|
1408 |
|
1409 /* disable autoneg */ |
|
1410 ctrl = er32(TXCW); |
|
1411 ctrl &= ~(1 << 31); |
|
1412 ew32(TXCW, ctrl); |
|
1413 |
|
1414 link = (er32(STATUS) & E1000_STATUS_LU); |
|
1415 |
|
1416 if (!link) { |
|
1417 /* set invert loss of signal */ |
|
1418 ctrl = er32(CTRL); |
|
1419 ctrl |= E1000_CTRL_ILOS; |
|
1420 ew32(CTRL, ctrl); |
|
1421 } |
|
1422 |
|
1423 /* special write to serdes control register to enable SerDes analog |
|
1424 * loopback |
|
1425 */ |
|
1426 #define E1000_SERDES_LB_ON 0x410 |
|
1427 ew32(SCTL, E1000_SERDES_LB_ON); |
|
1428 e1e_flush(); |
|
1429 usleep_range(10000, 20000); |
|
1430 |
|
1431 return 0; |
|
1432 } |
|
1433 |
|
1434 /* only call this for fiber/serdes connections to es2lan */ |
|
1435 static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter) |
|
1436 { |
|
1437 struct e1000_hw *hw = &adapter->hw; |
|
1438 u32 ctrlext = er32(CTRL_EXT); |
|
1439 u32 ctrl = er32(CTRL); |
|
1440 |
|
1441 /* save CTRL_EXT to restore later, reuse an empty variable (unused |
|
1442 * on mac_type 80003es2lan) |
|
1443 */ |
|
1444 adapter->tx_fifo_head = ctrlext; |
|
1445 |
|
1446 /* clear the serdes mode bits, putting the device into mac loopback */ |
|
1447 ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; |
|
1448 ew32(CTRL_EXT, ctrlext); |
|
1449 |
|
1450 /* force speed to 1000/FD, link up */ |
|
1451 ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); |
|
1452 ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | |
|
1453 E1000_CTRL_SPD_1000 | E1000_CTRL_FD); |
|
1454 ew32(CTRL, ctrl); |
|
1455 |
|
1456 /* set mac loopback */ |
|
1457 ctrl = er32(RCTL); |
|
1458 ctrl |= E1000_RCTL_LBM_MAC; |
|
1459 ew32(RCTL, ctrl); |
|
1460 |
|
1461 /* set testing mode parameters (no need to reset later) */ |
|
1462 #define KMRNCTRLSTA_OPMODE (0x1F << 16) |
|
1463 #define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582 |
|
1464 ew32(KMRNCTRLSTA, |
|
1465 (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII)); |
|
1466 |
|
1467 return 0; |
|
1468 } |
|
1469 |
|
1470 static int e1000_setup_loopback_test(struct e1000_adapter *adapter) |
|
1471 { |
|
1472 struct e1000_hw *hw = &adapter->hw; |
|
1473 u32 rctl; |
|
1474 |
|
1475 if (hw->phy.media_type == e1000_media_type_fiber || |
|
1476 hw->phy.media_type == e1000_media_type_internal_serdes) { |
|
1477 switch (hw->mac.type) { |
|
1478 case e1000_80003es2lan: |
|
1479 return e1000_set_es2lan_mac_loopback(adapter); |
|
1480 break; |
|
1481 case e1000_82571: |
|
1482 case e1000_82572: |
|
1483 return e1000_set_82571_fiber_loopback(adapter); |
|
1484 break; |
|
1485 default: |
|
1486 rctl = er32(RCTL); |
|
1487 rctl |= E1000_RCTL_LBM_TCVR; |
|
1488 ew32(RCTL, rctl); |
|
1489 return 0; |
|
1490 } |
|
1491 } else if (hw->phy.media_type == e1000_media_type_copper) { |
|
1492 return e1000_integrated_phy_loopback(adapter); |
|
1493 } |
|
1494 |
|
1495 return 7; |
|
1496 } |
|
1497 |
|
1498 static void e1000_loopback_cleanup(struct e1000_adapter *adapter) |
|
1499 { |
|
1500 struct e1000_hw *hw = &adapter->hw; |
|
1501 u32 rctl; |
|
1502 u16 phy_reg; |
|
1503 |
|
1504 rctl = er32(RCTL); |
|
1505 rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); |
|
1506 ew32(RCTL, rctl); |
|
1507 |
|
1508 switch (hw->mac.type) { |
|
1509 case e1000_80003es2lan: |
|
1510 if (hw->phy.media_type == e1000_media_type_fiber || |
|
1511 hw->phy.media_type == e1000_media_type_internal_serdes) { |
|
1512 /* restore CTRL_EXT, stealing space from tx_fifo_head */ |
|
1513 ew32(CTRL_EXT, adapter->tx_fifo_head); |
|
1514 adapter->tx_fifo_head = 0; |
|
1515 } |
|
1516 /* fall through */ |
|
1517 case e1000_82571: |
|
1518 case e1000_82572: |
|
1519 if (hw->phy.media_type == e1000_media_type_fiber || |
|
1520 hw->phy.media_type == e1000_media_type_internal_serdes) { |
|
1521 #define E1000_SERDES_LB_OFF 0x400 |
|
1522 ew32(SCTL, E1000_SERDES_LB_OFF); |
|
1523 e1e_flush(); |
|
1524 usleep_range(10000, 20000); |
|
1525 break; |
|
1526 } |
|
1527 /* Fall Through */ |
|
1528 default: |
|
1529 hw->mac.autoneg = 1; |
|
1530 if (hw->phy.type == e1000_phy_gg82563) |
|
1531 e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); |
|
1532 e1e_rphy(hw, PHY_CONTROL, &phy_reg); |
|
1533 if (phy_reg & MII_CR_LOOPBACK) { |
|
1534 phy_reg &= ~MII_CR_LOOPBACK; |
|
1535 e1e_wphy(hw, PHY_CONTROL, phy_reg); |
|
1536 e1000e_commit_phy(hw); |
|
1537 } |
|
1538 break; |
|
1539 } |
|
1540 } |
|
1541 |
|
1542 static void e1000_create_lbtest_frame(struct sk_buff *skb, |
|
1543 unsigned int frame_size) |
|
1544 { |
|
1545 memset(skb->data, 0xFF, frame_size); |
|
1546 frame_size &= ~1; |
|
1547 memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); |
|
1548 memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); |
|
1549 memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); |
|
1550 } |
|
1551 |
|
1552 static int e1000_check_lbtest_frame(struct sk_buff *skb, |
|
1553 unsigned int frame_size) |
|
1554 { |
|
1555 frame_size &= ~1; |
|
1556 if (*(skb->data + 3) == 0xFF) |
|
1557 if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && |
|
1558 (*(skb->data + frame_size / 2 + 12) == 0xAF)) |
|
1559 return 0; |
|
1560 return 13; |
|
1561 } |
|
1562 |
|
1563 static int e1000_run_loopback_test(struct e1000_adapter *adapter) |
|
1564 { |
|
1565 struct e1000_ring *tx_ring = &adapter->test_tx_ring; |
|
1566 struct e1000_ring *rx_ring = &adapter->test_rx_ring; |
|
1567 struct pci_dev *pdev = adapter->pdev; |
|
1568 struct e1000_hw *hw = &adapter->hw; |
|
1569 int i, j, k, l; |
|
1570 int lc; |
|
1571 int good_cnt; |
|
1572 int ret_val = 0; |
|
1573 unsigned long time; |
|
1574 |
|
1575 ew32(RDT(0), rx_ring->count - 1); |
|
1576 |
|
1577 /* Calculate the loop count based on the largest descriptor ring |
|
1578 * The idea is to wrap the largest ring a number of times using 64 |
|
1579 * send/receive pairs during each loop |
|
1580 */ |
|
1581 |
|
1582 if (rx_ring->count <= tx_ring->count) |
|
1583 lc = ((tx_ring->count / 64) * 2) + 1; |
|
1584 else |
|
1585 lc = ((rx_ring->count / 64) * 2) + 1; |
|
1586 |
|
1587 k = 0; |
|
1588 l = 0; |
|
1589 for (j = 0; j <= lc; j++) { /* loop count loop */ |
|
1590 for (i = 0; i < 64; i++) { /* send the packets */ |
|
1591 e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb, |
|
1592 1024); |
|
1593 dma_sync_single_for_device(&pdev->dev, |
|
1594 tx_ring->buffer_info[k].dma, |
|
1595 tx_ring->buffer_info[k].length, |
|
1596 DMA_TO_DEVICE); |
|
1597 k++; |
|
1598 if (k == tx_ring->count) |
|
1599 k = 0; |
|
1600 } |
|
1601 ew32(TDT(0), k); |
|
1602 e1e_flush(); |
|
1603 msleep(200); |
|
1604 time = jiffies; /* set the start time for the receive */ |
|
1605 good_cnt = 0; |
|
1606 do { /* receive the sent packets */ |
|
1607 dma_sync_single_for_cpu(&pdev->dev, |
|
1608 rx_ring->buffer_info[l].dma, 2048, |
|
1609 DMA_FROM_DEVICE); |
|
1610 |
|
1611 ret_val = e1000_check_lbtest_frame( |
|
1612 rx_ring->buffer_info[l].skb, 1024); |
|
1613 if (!ret_val) |
|
1614 good_cnt++; |
|
1615 l++; |
|
1616 if (l == rx_ring->count) |
|
1617 l = 0; |
|
1618 /* time + 20 msecs (200 msecs on 2.4) is more than |
|
1619 * enough time to complete the receives, if it's |
|
1620 * exceeded, break and error off |
|
1621 */ |
|
1622 } while ((good_cnt < 64) && !time_after(jiffies, time + 20)); |
|
1623 if (good_cnt != 64) { |
|
1624 ret_val = 13; /* ret_val is the same as mis-compare */ |
|
1625 break; |
|
1626 } |
|
1627 if (jiffies >= (time + 20)) { |
|
1628 ret_val = 14; /* error code for time out error */ |
|
1629 break; |
|
1630 } |
|
1631 } /* end loop count loop */ |
|
1632 return ret_val; |
|
1633 } |
|
1634 |
|
1635 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) |
|
1636 { |
|
1637 struct e1000_hw *hw = &adapter->hw; |
|
1638 |
|
1639 /* PHY loopback cannot be performed if SoL/IDER sessions are active */ |
|
1640 if (hw->phy.ops.check_reset_block && |
|
1641 hw->phy.ops.check_reset_block(hw)) { |
|
1642 e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); |
|
1643 *data = 0; |
|
1644 goto out; |
|
1645 } |
|
1646 |
|
1647 *data = e1000_setup_desc_rings(adapter); |
|
1648 if (*data) |
|
1649 goto out; |
|
1650 |
|
1651 *data = e1000_setup_loopback_test(adapter); |
|
1652 if (*data) |
|
1653 goto err_loopback; |
|
1654 |
|
1655 *data = e1000_run_loopback_test(adapter); |
|
1656 e1000_loopback_cleanup(adapter); |
|
1657 |
|
1658 err_loopback: |
|
1659 e1000_free_desc_rings(adapter); |
|
1660 out: |
|
1661 return *data; |
|
1662 } |
|
1663 |
|
1664 static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) |
|
1665 { |
|
1666 struct e1000_hw *hw = &adapter->hw; |
|
1667 |
|
1668 *data = 0; |
|
1669 if (hw->phy.media_type == e1000_media_type_internal_serdes) { |
|
1670 int i = 0; |
|
1671 hw->mac.serdes_has_link = false; |
|
1672 |
|
1673 /* On some blade server designs, link establishment |
|
1674 * could take as long as 2-3 minutes |
|
1675 */ |
|
1676 do { |
|
1677 hw->mac.ops.check_for_link(hw); |
|
1678 if (hw->mac.serdes_has_link) |
|
1679 return *data; |
|
1680 msleep(20); |
|
1681 } while (i++ < 3750); |
|
1682 |
|
1683 *data = 1; |
|
1684 } else { |
|
1685 hw->mac.ops.check_for_link(hw); |
|
1686 if (hw->mac.autoneg) |
|
1687 /* On some Phy/switch combinations, link establishment |
|
1688 * can take a few seconds more than expected. |
|
1689 */ |
|
1690 msleep(5000); |
|
1691 |
|
1692 if (!(er32(STATUS) & E1000_STATUS_LU)) |
|
1693 *data = 1; |
|
1694 } |
|
1695 return *data; |
|
1696 } |
|
1697 |
|
1698 static int e1000e_get_sset_count(struct net_device *netdev, int sset) |
|
1699 { |
|
1700 switch (sset) { |
|
1701 case ETH_SS_TEST: |
|
1702 return E1000_TEST_LEN; |
|
1703 case ETH_SS_STATS: |
|
1704 return E1000_STATS_LEN; |
|
1705 default: |
|
1706 return -EOPNOTSUPP; |
|
1707 } |
|
1708 } |
|
1709 |
|
1710 static void e1000_diag_test(struct net_device *netdev, |
|
1711 struct ethtool_test *eth_test, u64 *data) |
|
1712 { |
|
1713 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1714 u16 autoneg_advertised; |
|
1715 u8 forced_speed_duplex; |
|
1716 u8 autoneg; |
|
1717 bool if_running = netif_running(netdev); |
|
1718 |
|
1719 set_bit(__E1000_TESTING, &adapter->state); |
|
1720 |
|
1721 if (!if_running) { |
|
1722 /* Get control of and reset hardware */ |
|
1723 if (adapter->flags & FLAG_HAS_AMT) |
|
1724 e1000e_get_hw_control(adapter); |
|
1725 |
|
1726 e1000e_power_up_phy(adapter); |
|
1727 |
|
1728 adapter->hw.phy.autoneg_wait_to_complete = 1; |
|
1729 e1000e_reset(adapter); |
|
1730 adapter->hw.phy.autoneg_wait_to_complete = 0; |
|
1731 } |
|
1732 |
|
1733 if (eth_test->flags == ETH_TEST_FL_OFFLINE) { |
|
1734 /* Offline tests */ |
|
1735 |
|
1736 /* save speed, duplex, autoneg settings */ |
|
1737 autoneg_advertised = adapter->hw.phy.autoneg_advertised; |
|
1738 forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; |
|
1739 autoneg = adapter->hw.mac.autoneg; |
|
1740 |
|
1741 e_info("offline testing starting\n"); |
|
1742 |
|
1743 if (if_running) |
|
1744 /* indicate we're in test mode */ |
|
1745 dev_close(netdev); |
|
1746 |
|
1747 if (e1000_reg_test(adapter, &data[0])) |
|
1748 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1749 |
|
1750 e1000e_reset(adapter); |
|
1751 if (e1000_eeprom_test(adapter, &data[1])) |
|
1752 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1753 |
|
1754 e1000e_reset(adapter); |
|
1755 if (e1000_intr_test(adapter, &data[2])) |
|
1756 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1757 |
|
1758 e1000e_reset(adapter); |
|
1759 if (e1000_loopback_test(adapter, &data[3])) |
|
1760 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1761 |
|
1762 /* force this routine to wait until autoneg complete/timeout */ |
|
1763 adapter->hw.phy.autoneg_wait_to_complete = 1; |
|
1764 e1000e_reset(adapter); |
|
1765 adapter->hw.phy.autoneg_wait_to_complete = 0; |
|
1766 |
|
1767 if (e1000_link_test(adapter, &data[4])) |
|
1768 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1769 |
|
1770 /* restore speed, duplex, autoneg settings */ |
|
1771 adapter->hw.phy.autoneg_advertised = autoneg_advertised; |
|
1772 adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; |
|
1773 adapter->hw.mac.autoneg = autoneg; |
|
1774 e1000e_reset(adapter); |
|
1775 |
|
1776 clear_bit(__E1000_TESTING, &adapter->state); |
|
1777 if (if_running) |
|
1778 dev_open(netdev); |
|
1779 } else { |
|
1780 /* Online tests */ |
|
1781 |
|
1782 e_info("online testing starting\n"); |
|
1783 |
|
1784 /* register, eeprom, intr and loopback tests not run online */ |
|
1785 data[0] = 0; |
|
1786 data[1] = 0; |
|
1787 data[2] = 0; |
|
1788 data[3] = 0; |
|
1789 |
|
1790 if (e1000_link_test(adapter, &data[4])) |
|
1791 eth_test->flags |= ETH_TEST_FL_FAILED; |
|
1792 |
|
1793 clear_bit(__E1000_TESTING, &adapter->state); |
|
1794 } |
|
1795 |
|
1796 if (!if_running) { |
|
1797 e1000e_reset(adapter); |
|
1798 |
|
1799 if (adapter->flags & FLAG_HAS_AMT) |
|
1800 e1000e_release_hw_control(adapter); |
|
1801 } |
|
1802 |
|
1803 msleep_interruptible(4 * 1000); |
|
1804 } |
|
1805 |
|
1806 static void e1000_get_wol(struct net_device *netdev, |
|
1807 struct ethtool_wolinfo *wol) |
|
1808 { |
|
1809 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1810 |
|
1811 wol->supported = 0; |
|
1812 wol->wolopts = 0; |
|
1813 |
|
1814 if (!(adapter->flags & FLAG_HAS_WOL) || |
|
1815 !device_can_wakeup(&adapter->pdev->dev)) |
|
1816 return; |
|
1817 |
|
1818 wol->supported = WAKE_UCAST | WAKE_MCAST | |
|
1819 WAKE_BCAST | WAKE_MAGIC | WAKE_PHY; |
|
1820 |
|
1821 /* apply any specific unsupported masks here */ |
|
1822 if (adapter->flags & FLAG_NO_WAKE_UCAST) { |
|
1823 wol->supported &= ~WAKE_UCAST; |
|
1824 |
|
1825 if (adapter->wol & E1000_WUFC_EX) |
|
1826 e_err("Interface does not support directed (unicast) frame wake-up packets\n"); |
|
1827 } |
|
1828 |
|
1829 if (adapter->wol & E1000_WUFC_EX) |
|
1830 wol->wolopts |= WAKE_UCAST; |
|
1831 if (adapter->wol & E1000_WUFC_MC) |
|
1832 wol->wolopts |= WAKE_MCAST; |
|
1833 if (adapter->wol & E1000_WUFC_BC) |
|
1834 wol->wolopts |= WAKE_BCAST; |
|
1835 if (adapter->wol & E1000_WUFC_MAG) |
|
1836 wol->wolopts |= WAKE_MAGIC; |
|
1837 if (adapter->wol & E1000_WUFC_LNKC) |
|
1838 wol->wolopts |= WAKE_PHY; |
|
1839 } |
|
1840 |
|
1841 static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) |
|
1842 { |
|
1843 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1844 |
|
1845 if (!(adapter->flags & FLAG_HAS_WOL) || |
|
1846 !device_can_wakeup(&adapter->pdev->dev) || |
|
1847 (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | |
|
1848 WAKE_MAGIC | WAKE_PHY))) |
|
1849 return -EOPNOTSUPP; |
|
1850 |
|
1851 /* these settings will always override what we currently have */ |
|
1852 adapter->wol = 0; |
|
1853 |
|
1854 if (wol->wolopts & WAKE_UCAST) |
|
1855 adapter->wol |= E1000_WUFC_EX; |
|
1856 if (wol->wolopts & WAKE_MCAST) |
|
1857 adapter->wol |= E1000_WUFC_MC; |
|
1858 if (wol->wolopts & WAKE_BCAST) |
|
1859 adapter->wol |= E1000_WUFC_BC; |
|
1860 if (wol->wolopts & WAKE_MAGIC) |
|
1861 adapter->wol |= E1000_WUFC_MAG; |
|
1862 if (wol->wolopts & WAKE_PHY) |
|
1863 adapter->wol |= E1000_WUFC_LNKC; |
|
1864 |
|
1865 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
|
1866 |
|
1867 return 0; |
|
1868 } |
|
1869 |
|
1870 static int e1000_set_phys_id(struct net_device *netdev, |
|
1871 enum ethtool_phys_id_state state) |
|
1872 { |
|
1873 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1874 struct e1000_hw *hw = &adapter->hw; |
|
1875 |
|
1876 switch (state) { |
|
1877 case ETHTOOL_ID_ACTIVE: |
|
1878 if (!hw->mac.ops.blink_led) |
|
1879 return 2; /* cycle on/off twice per second */ |
|
1880 |
|
1881 hw->mac.ops.blink_led(hw); |
|
1882 break; |
|
1883 |
|
1884 case ETHTOOL_ID_INACTIVE: |
|
1885 if (hw->phy.type == e1000_phy_ife) |
|
1886 e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); |
|
1887 hw->mac.ops.led_off(hw); |
|
1888 hw->mac.ops.cleanup_led(hw); |
|
1889 break; |
|
1890 |
|
1891 case ETHTOOL_ID_ON: |
|
1892 hw->mac.ops.led_on(hw); |
|
1893 break; |
|
1894 |
|
1895 case ETHTOOL_ID_OFF: |
|
1896 hw->mac.ops.led_off(hw); |
|
1897 break; |
|
1898 } |
|
1899 return 0; |
|
1900 } |
|
1901 |
|
1902 static int e1000_get_coalesce(struct net_device *netdev, |
|
1903 struct ethtool_coalesce *ec) |
|
1904 { |
|
1905 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1906 |
|
1907 if (adapter->itr_setting <= 4) |
|
1908 ec->rx_coalesce_usecs = adapter->itr_setting; |
|
1909 else |
|
1910 ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting; |
|
1911 |
|
1912 return 0; |
|
1913 } |
|
1914 |
|
1915 static int e1000_set_coalesce(struct net_device *netdev, |
|
1916 struct ethtool_coalesce *ec) |
|
1917 { |
|
1918 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1919 |
|
1920 if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) || |
|
1921 ((ec->rx_coalesce_usecs > 4) && |
|
1922 (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) || |
|
1923 (ec->rx_coalesce_usecs == 2)) |
|
1924 return -EINVAL; |
|
1925 |
|
1926 if (ec->rx_coalesce_usecs == 4) { |
|
1927 adapter->itr_setting = 4; |
|
1928 adapter->itr = adapter->itr_setting; |
|
1929 } else if (ec->rx_coalesce_usecs <= 3) { |
|
1930 adapter->itr = 20000; |
|
1931 adapter->itr_setting = ec->rx_coalesce_usecs; |
|
1932 } else { |
|
1933 adapter->itr = (1000000 / ec->rx_coalesce_usecs); |
|
1934 adapter->itr_setting = adapter->itr & ~3; |
|
1935 } |
|
1936 |
|
1937 if (adapter->itr_setting != 0) |
|
1938 e1000e_write_itr(adapter, adapter->itr); |
|
1939 else |
|
1940 e1000e_write_itr(adapter, 0); |
|
1941 |
|
1942 return 0; |
|
1943 } |
|
1944 |
|
1945 static int e1000_nway_reset(struct net_device *netdev) |
|
1946 { |
|
1947 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1948 |
|
1949 if (!netif_running(netdev)) |
|
1950 return -EAGAIN; |
|
1951 |
|
1952 if (!adapter->hw.mac.autoneg) |
|
1953 return -EINVAL; |
|
1954 |
|
1955 e1000e_reinit_locked(adapter); |
|
1956 |
|
1957 return 0; |
|
1958 } |
|
1959 |
|
1960 static void e1000_get_ethtool_stats(struct net_device *netdev, |
|
1961 struct ethtool_stats *stats, |
|
1962 u64 *data) |
|
1963 { |
|
1964 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
1965 struct rtnl_link_stats64 net_stats; |
|
1966 int i; |
|
1967 char *p = NULL; |
|
1968 |
|
1969 e1000e_get_stats64(netdev, &net_stats); |
|
1970 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { |
|
1971 switch (e1000_gstrings_stats[i].type) { |
|
1972 case NETDEV_STATS: |
|
1973 p = (char *) &net_stats + |
|
1974 e1000_gstrings_stats[i].stat_offset; |
|
1975 break; |
|
1976 case E1000_STATS: |
|
1977 p = (char *) adapter + |
|
1978 e1000_gstrings_stats[i].stat_offset; |
|
1979 break; |
|
1980 default: |
|
1981 data[i] = 0; |
|
1982 continue; |
|
1983 } |
|
1984 |
|
1985 data[i] = (e1000_gstrings_stats[i].sizeof_stat == |
|
1986 sizeof(u64)) ? *(u64 *)p : *(u32 *)p; |
|
1987 } |
|
1988 } |
|
1989 |
|
1990 static void e1000_get_strings(struct net_device *netdev, u32 stringset, |
|
1991 u8 *data) |
|
1992 { |
|
1993 u8 *p = data; |
|
1994 int i; |
|
1995 |
|
1996 switch (stringset) { |
|
1997 case ETH_SS_TEST: |
|
1998 memcpy(data, e1000_gstrings_test, sizeof(e1000_gstrings_test)); |
|
1999 break; |
|
2000 case ETH_SS_STATS: |
|
2001 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { |
|
2002 memcpy(p, e1000_gstrings_stats[i].stat_string, |
|
2003 ETH_GSTRING_LEN); |
|
2004 p += ETH_GSTRING_LEN; |
|
2005 } |
|
2006 break; |
|
2007 } |
|
2008 } |
|
2009 |
|
2010 static int e1000_get_rxnfc(struct net_device *netdev, |
|
2011 struct ethtool_rxnfc *info, u32 *rule_locs) |
|
2012 { |
|
2013 info->data = 0; |
|
2014 |
|
2015 switch (info->cmd) { |
|
2016 case ETHTOOL_GRXFH: { |
|
2017 struct e1000_adapter *adapter = netdev_priv(netdev); |
|
2018 struct e1000_hw *hw = &adapter->hw; |
|
2019 u32 mrqc = er32(MRQC); |
|
2020 |
|
2021 if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK)) |
|
2022 return 0; |
|
2023 |
|
2024 switch (info->flow_type) { |
|
2025 case TCP_V4_FLOW: |
|
2026 if (mrqc & E1000_MRQC_RSS_FIELD_IPV4_TCP) |
|
2027 info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; |
|
2028 /* fall through */ |
|
2029 case UDP_V4_FLOW: |
|
2030 case SCTP_V4_FLOW: |
|
2031 case AH_ESP_V4_FLOW: |
|
2032 case IPV4_FLOW: |
|
2033 if (mrqc & E1000_MRQC_RSS_FIELD_IPV4) |
|
2034 info->data |= RXH_IP_SRC | RXH_IP_DST; |
|
2035 break; |
|
2036 case TCP_V6_FLOW: |
|
2037 if (mrqc & E1000_MRQC_RSS_FIELD_IPV6_TCP) |
|
2038 info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; |
|
2039 /* fall through */ |
|
2040 case UDP_V6_FLOW: |
|
2041 case SCTP_V6_FLOW: |
|
2042 case AH_ESP_V6_FLOW: |
|
2043 case IPV6_FLOW: |
|
2044 if (mrqc & E1000_MRQC_RSS_FIELD_IPV6) |
|
2045 info->data |= RXH_IP_SRC | RXH_IP_DST; |
|
2046 break; |
|
2047 default: |
|
2048 break; |
|
2049 } |
|
2050 return 0; |
|
2051 } |
|
2052 default: |
|
2053 return -EOPNOTSUPP; |
|
2054 } |
|
2055 } |
|
2056 |
|
2057 static int e1000e_ethtool_begin(struct net_device *netdev) |
|
2058 { |
|
2059 return pm_runtime_get_sync(netdev->dev.parent); |
|
2060 } |
|
2061 |
|
2062 static void e1000e_ethtool_complete(struct net_device *netdev) |
|
2063 { |
|
2064 pm_runtime_put_sync(netdev->dev.parent); |
|
2065 } |
|
2066 |
|
2067 static const struct ethtool_ops e1000_ethtool_ops = { |
|
2068 .begin = e1000e_ethtool_begin, |
|
2069 .complete = e1000e_ethtool_complete, |
|
2070 .get_settings = e1000_get_settings, |
|
2071 .set_settings = e1000_set_settings, |
|
2072 .get_drvinfo = e1000_get_drvinfo, |
|
2073 .get_regs_len = e1000_get_regs_len, |
|
2074 .get_regs = e1000_get_regs, |
|
2075 .get_wol = e1000_get_wol, |
|
2076 .set_wol = e1000_set_wol, |
|
2077 .get_msglevel = e1000_get_msglevel, |
|
2078 .set_msglevel = e1000_set_msglevel, |
|
2079 .nway_reset = e1000_nway_reset, |
|
2080 .get_link = ethtool_op_get_link, |
|
2081 .get_eeprom_len = e1000_get_eeprom_len, |
|
2082 .get_eeprom = e1000_get_eeprom, |
|
2083 .set_eeprom = e1000_set_eeprom, |
|
2084 .get_ringparam = e1000_get_ringparam, |
|
2085 .set_ringparam = e1000_set_ringparam, |
|
2086 .get_pauseparam = e1000_get_pauseparam, |
|
2087 .set_pauseparam = e1000_set_pauseparam, |
|
2088 .self_test = e1000_diag_test, |
|
2089 .get_strings = e1000_get_strings, |
|
2090 .set_phys_id = e1000_set_phys_id, |
|
2091 .get_ethtool_stats = e1000_get_ethtool_stats, |
|
2092 .get_sset_count = e1000e_get_sset_count, |
|
2093 .get_coalesce = e1000_get_coalesce, |
|
2094 .set_coalesce = e1000_set_coalesce, |
|
2095 .get_rxnfc = e1000_get_rxnfc, |
|
2096 .get_ts_info = ethtool_op_get_ts_info, |
|
2097 }; |
|
2098 |
|
2099 void e1000e_set_ethtool_ops(struct net_device *netdev) |
|
2100 { |
|
2101 SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); |
|
2102 } |