|
1 /* |
|
2 |
|
3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux. |
|
4 |
|
5 Maintained by Jeff Garzik <jgarzik@pobox.com> |
|
6 Copyright 2000-2002 Jeff Garzik |
|
7 |
|
8 Much code comes from Donald Becker's rtl8139.c driver, |
|
9 versions 1.13 and older. This driver was originally based |
|
10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13: |
|
11 |
|
12 -----<snip>----- |
|
13 |
|
14 Written 1997-2001 by Donald Becker. |
|
15 This software may be used and distributed according to the |
|
16 terms of the GNU General Public License (GPL), incorporated |
|
17 herein by reference. Drivers based on or derived from this |
|
18 code fall under the GPL and must retain the authorship, |
|
19 copyright and license notice. This file is not a complete |
|
20 program and may only be used when the entire operating |
|
21 system is licensed under the GPL. |
|
22 |
|
23 This driver is for boards based on the RTL8129 and RTL8139 |
|
24 PCI ethernet chips. |
|
25 |
|
26 The author may be reached as becker@scyld.com, or C/O Scyld |
|
27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis |
|
28 MD 21403 |
|
29 |
|
30 Support and updates available at |
|
31 http://www.scyld.com/network/rtl8139.html |
|
32 |
|
33 Twister-tuning table provided by Kinston |
|
34 <shangh@realtek.com.tw>. |
|
35 |
|
36 -----<snip>----- |
|
37 |
|
38 This software may be used and distributed according to the terms |
|
39 of the GNU General Public License, incorporated herein by reference. |
|
40 |
|
41 Contributors: |
|
42 |
|
43 Donald Becker - he wrote the original driver, kudos to him! |
|
44 (but please don't e-mail him for support, this isn't his driver) |
|
45 |
|
46 Tigran Aivazian - bug fixes, skbuff free cleanup |
|
47 |
|
48 Martin Mares - suggestions for PCI cleanup |
|
49 |
|
50 David S. Miller - PCI DMA and softnet updates |
|
51 |
|
52 Ernst Gill - fixes ported from BSD driver |
|
53 |
|
54 Daniel Kobras - identified specific locations of |
|
55 posted MMIO write bugginess |
|
56 |
|
57 Gerard Sharp - bug fix, testing and feedback |
|
58 |
|
59 David Ford - Rx ring wrap fix |
|
60 |
|
61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me |
|
62 to find and fix a crucial bug on older chipsets. |
|
63 |
|
64 Donald Becker/Chris Butterworth/Marcus Westergren - |
|
65 Noticed various Rx packet size-related buglets. |
|
66 |
|
67 Santiago Garcia Mantinan - testing and feedback |
|
68 |
|
69 Jens David - 2.2.x kernel backports |
|
70 |
|
71 Martin Dennett - incredibly helpful insight on undocumented |
|
72 features of the 8139 chips |
|
73 |
|
74 Jean-Jacques Michel - bug fix |
|
75 |
|
76 Tobias Ringström - Rx interrupt status checking suggestion |
|
77 |
|
78 Andrew Morton - Clear blocked signals, avoid |
|
79 buffer overrun setting current->comm. |
|
80 |
|
81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls |
|
82 |
|
83 Robert Kuebel - Save kernel thread from dying on any signal. |
|
84 |
|
85 Submitting bug reports: |
|
86 |
|
87 "rtl8139-diag -mmmaaavvveefN" output |
|
88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log |
|
89 |
|
90 */ |
|
91 |
|
92 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
|
93 |
|
94 #define DRV_NAME "8139too" |
|
95 #define DRV_VERSION "0.9.28" |
|
96 |
|
97 |
|
98 #include <linux/module.h> |
|
99 #include <linux/kernel.h> |
|
100 #include <linux/compiler.h> |
|
101 #include <linux/pci.h> |
|
102 #include <linux/init.h> |
|
103 #include <linux/interrupt.h> |
|
104 #include <linux/netdevice.h> |
|
105 #include <linux/etherdevice.h> |
|
106 #include <linux/rtnetlink.h> |
|
107 #include <linux/delay.h> |
|
108 #include <linux/ethtool.h> |
|
109 #include <linux/mii.h> |
|
110 #include <linux/completion.h> |
|
111 #include <linux/crc32.h> |
|
112 #include <linux/io.h> |
|
113 #include <linux/uaccess.h> |
|
114 #include <linux/gfp.h> |
|
115 #include <asm/irq.h> |
|
116 |
|
117 #define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION |
|
118 |
|
119 /* Default Message level */ |
|
120 #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ |
|
121 NETIF_MSG_PROBE | \ |
|
122 NETIF_MSG_LINK) |
|
123 |
|
124 |
|
125 /* define to 1, 2 or 3 to enable copious debugging info */ |
|
126 #define RTL8139_DEBUG 0 |
|
127 |
|
128 /* define to 1 to disable lightweight runtime debugging checks */ |
|
129 #undef RTL8139_NDEBUG |
|
130 |
|
131 |
|
132 #ifdef RTL8139_NDEBUG |
|
133 # define assert(expr) do {} while (0) |
|
134 #else |
|
135 # define assert(expr) \ |
|
136 if (unlikely(!(expr))) { \ |
|
137 pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ |
|
138 #expr, __FILE__, __func__, __LINE__); \ |
|
139 } |
|
140 #endif |
|
141 |
|
142 |
|
143 /* A few user-configurable values. */ |
|
144 /* media options */ |
|
145 #define MAX_UNITS 8 |
|
146 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; |
|
147 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; |
|
148 |
|
149 /* Whether to use MMIO or PIO. Default to MMIO. */ |
|
150 #ifdef CONFIG_8139TOO_PIO |
|
151 static bool use_io = true; |
|
152 #else |
|
153 static bool use_io = false; |
|
154 #endif |
|
155 |
|
156 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). |
|
157 The RTL chips use a 64 element hash table based on the Ethernet CRC. */ |
|
158 static int multicast_filter_limit = 32; |
|
159 |
|
160 /* bitmapped message enable number */ |
|
161 static int debug = -1; |
|
162 |
|
163 /* |
|
164 * Receive ring size |
|
165 * Warning: 64K ring has hardware issues and may lock up. |
|
166 */ |
|
167 #if defined(CONFIG_SH_DREAMCAST) |
|
168 #define RX_BUF_IDX 0 /* 8K ring */ |
|
169 #else |
|
170 #define RX_BUF_IDX 2 /* 32K ring */ |
|
171 #endif |
|
172 #define RX_BUF_LEN (8192 << RX_BUF_IDX) |
|
173 #define RX_BUF_PAD 16 |
|
174 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ |
|
175 |
|
176 #if RX_BUF_LEN == 65536 |
|
177 #define RX_BUF_TOT_LEN RX_BUF_LEN |
|
178 #else |
|
179 #define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD) |
|
180 #endif |
|
181 |
|
182 /* Number of Tx descriptor registers. */ |
|
183 #define NUM_TX_DESC 4 |
|
184 |
|
185 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/ |
|
186 #define MAX_ETH_FRAME_SIZE 1536 |
|
187 |
|
188 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */ |
|
189 #define TX_BUF_SIZE MAX_ETH_FRAME_SIZE |
|
190 #define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) |
|
191 |
|
192 /* PCI Tuning Parameters |
|
193 Threshold is bytes transferred to chip before transmission starts. */ |
|
194 #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ |
|
195 |
|
196 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ |
|
197 #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */ |
|
198 #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ |
|
199 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ |
|
200 #define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */ |
|
201 |
|
202 /* Operational parameters that usually are not changed. */ |
|
203 /* Time in jiffies before concluding the transmitter is hung. */ |
|
204 #define TX_TIMEOUT (6*HZ) |
|
205 |
|
206 |
|
207 enum { |
|
208 HAS_MII_XCVR = 0x010000, |
|
209 HAS_CHIP_XCVR = 0x020000, |
|
210 HAS_LNK_CHNG = 0x040000, |
|
211 }; |
|
212 |
|
213 #define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */ |
|
214 #define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */ |
|
215 #define RTL_MIN_IO_SIZE 0x80 |
|
216 #define RTL8139B_IO_SIZE 256 |
|
217 |
|
218 #define RTL8129_CAPS HAS_MII_XCVR |
|
219 #define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG) |
|
220 |
|
221 typedef enum { |
|
222 RTL8139 = 0, |
|
223 RTL8129, |
|
224 } board_t; |
|
225 |
|
226 |
|
227 /* indexed by board_t, above */ |
|
228 static const struct { |
|
229 const char *name; |
|
230 u32 hw_flags; |
|
231 } board_info[] = { |
|
232 { "RealTek RTL8139", RTL8139_CAPS }, |
|
233 { "RealTek RTL8129", RTL8129_CAPS }, |
|
234 }; |
|
235 |
|
236 |
|
237 static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = { |
|
238 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
239 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
240 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
241 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
242 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
243 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
244 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
245 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
246 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
247 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
248 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
249 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
250 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
251 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
252 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
253 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
254 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
255 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
256 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
257 |
|
258 #ifdef CONFIG_SH_SECUREEDGE5410 |
|
259 /* Bogus 8139 silicon reports 8129 without external PROM :-( */ |
|
260 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, |
|
261 #endif |
|
262 #ifdef CONFIG_8139TOO_8129 |
|
263 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 }, |
|
264 #endif |
|
265 |
|
266 /* some crazy cards report invalid vendor ids like |
|
267 * 0x0001 here. The other ids are valid and constant, |
|
268 * so we simply don't match on the main vendor id. |
|
269 */ |
|
270 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 }, |
|
271 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 }, |
|
272 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 }, |
|
273 |
|
274 {0,} |
|
275 }; |
|
276 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl); |
|
277 |
|
278 static struct { |
|
279 const char str[ETH_GSTRING_LEN]; |
|
280 } ethtool_stats_keys[] = { |
|
281 { "early_rx" }, |
|
282 { "tx_buf_mapped" }, |
|
283 { "tx_timeouts" }, |
|
284 { "rx_lost_in_ring" }, |
|
285 }; |
|
286 |
|
287 /* The rest of these values should never change. */ |
|
288 |
|
289 /* Symbolic offsets to registers. */ |
|
290 enum RTL8139_registers { |
|
291 MAC0 = 0, /* Ethernet hardware address. */ |
|
292 MAR0 = 8, /* Multicast filter. */ |
|
293 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ |
|
294 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ |
|
295 RxBuf = 0x30, |
|
296 ChipCmd = 0x37, |
|
297 RxBufPtr = 0x38, |
|
298 RxBufAddr = 0x3A, |
|
299 IntrMask = 0x3C, |
|
300 IntrStatus = 0x3E, |
|
301 TxConfig = 0x40, |
|
302 RxConfig = 0x44, |
|
303 Timer = 0x48, /* A general-purpose counter. */ |
|
304 RxMissed = 0x4C, /* 24 bits valid, write clears. */ |
|
305 Cfg9346 = 0x50, |
|
306 Config0 = 0x51, |
|
307 Config1 = 0x52, |
|
308 TimerInt = 0x54, |
|
309 MediaStatus = 0x58, |
|
310 Config3 = 0x59, |
|
311 Config4 = 0x5A, /* absent on RTL-8139A */ |
|
312 HltClk = 0x5B, |
|
313 MultiIntr = 0x5C, |
|
314 TxSummary = 0x60, |
|
315 BasicModeCtrl = 0x62, |
|
316 BasicModeStatus = 0x64, |
|
317 NWayAdvert = 0x66, |
|
318 NWayLPAR = 0x68, |
|
319 NWayExpansion = 0x6A, |
|
320 /* Undocumented registers, but required for proper operation. */ |
|
321 FIFOTMS = 0x70, /* FIFO Control and test. */ |
|
322 CSCR = 0x74, /* Chip Status and Configuration Register. */ |
|
323 PARA78 = 0x78, |
|
324 FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */ |
|
325 PARA7c = 0x7c, /* Magic transceiver parameter register. */ |
|
326 Config5 = 0xD8, /* absent on RTL-8139A */ |
|
327 }; |
|
328 |
|
329 enum ClearBitMasks { |
|
330 MultiIntrClear = 0xF000, |
|
331 ChipCmdClear = 0xE2, |
|
332 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), |
|
333 }; |
|
334 |
|
335 enum ChipCmdBits { |
|
336 CmdReset = 0x10, |
|
337 CmdRxEnb = 0x08, |
|
338 CmdTxEnb = 0x04, |
|
339 RxBufEmpty = 0x01, |
|
340 }; |
|
341 |
|
342 /* Interrupt register bits, using my own meaningful names. */ |
|
343 enum IntrStatusBits { |
|
344 PCIErr = 0x8000, |
|
345 PCSTimeout = 0x4000, |
|
346 RxFIFOOver = 0x40, |
|
347 RxUnderrun = 0x20, |
|
348 RxOverflow = 0x10, |
|
349 TxErr = 0x08, |
|
350 TxOK = 0x04, |
|
351 RxErr = 0x02, |
|
352 RxOK = 0x01, |
|
353 |
|
354 RxAckBits = RxFIFOOver | RxOverflow | RxOK, |
|
355 }; |
|
356 |
|
357 enum TxStatusBits { |
|
358 TxHostOwns = 0x2000, |
|
359 TxUnderrun = 0x4000, |
|
360 TxStatOK = 0x8000, |
|
361 TxOutOfWindow = 0x20000000, |
|
362 TxAborted = 0x40000000, |
|
363 TxCarrierLost = 0x80000000, |
|
364 }; |
|
365 enum RxStatusBits { |
|
366 RxMulticast = 0x8000, |
|
367 RxPhysical = 0x4000, |
|
368 RxBroadcast = 0x2000, |
|
369 RxBadSymbol = 0x0020, |
|
370 RxRunt = 0x0010, |
|
371 RxTooLong = 0x0008, |
|
372 RxCRCErr = 0x0004, |
|
373 RxBadAlign = 0x0002, |
|
374 RxStatusOK = 0x0001, |
|
375 }; |
|
376 |
|
377 /* Bits in RxConfig. */ |
|
378 enum rx_mode_bits { |
|
379 AcceptErr = 0x20, |
|
380 AcceptRunt = 0x10, |
|
381 AcceptBroadcast = 0x08, |
|
382 AcceptMulticast = 0x04, |
|
383 AcceptMyPhys = 0x02, |
|
384 AcceptAllPhys = 0x01, |
|
385 }; |
|
386 |
|
387 /* Bits in TxConfig. */ |
|
388 enum tx_config_bits { |
|
389 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */ |
|
390 TxIFGShift = 24, |
|
391 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */ |
|
392 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */ |
|
393 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */ |
|
394 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */ |
|
395 |
|
396 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ |
|
397 TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */ |
|
398 TxClearAbt = (1 << 0), /* Clear abort (WO) */ |
|
399 TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */ |
|
400 TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */ |
|
401 |
|
402 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ |
|
403 }; |
|
404 |
|
405 /* Bits in Config1 */ |
|
406 enum Config1Bits { |
|
407 Cfg1_PM_Enable = 0x01, |
|
408 Cfg1_VPD_Enable = 0x02, |
|
409 Cfg1_PIO = 0x04, |
|
410 Cfg1_MMIO = 0x08, |
|
411 LWAKE = 0x10, /* not on 8139, 8139A */ |
|
412 Cfg1_Driver_Load = 0x20, |
|
413 Cfg1_LED0 = 0x40, |
|
414 Cfg1_LED1 = 0x80, |
|
415 SLEEP = (1 << 1), /* only on 8139, 8139A */ |
|
416 PWRDN = (1 << 0), /* only on 8139, 8139A */ |
|
417 }; |
|
418 |
|
419 /* Bits in Config3 */ |
|
420 enum Config3Bits { |
|
421 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */ |
|
422 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */ |
|
423 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */ |
|
424 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */ |
|
425 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */ |
|
426 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */ |
|
427 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */ |
|
428 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */ |
|
429 }; |
|
430 |
|
431 /* Bits in Config4 */ |
|
432 enum Config4Bits { |
|
433 LWPTN = (1 << 2), /* not on 8139, 8139A */ |
|
434 }; |
|
435 |
|
436 /* Bits in Config5 */ |
|
437 enum Config5Bits { |
|
438 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */ |
|
439 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */ |
|
440 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */ |
|
441 Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */ |
|
442 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */ |
|
443 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */ |
|
444 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */ |
|
445 }; |
|
446 |
|
447 enum RxConfigBits { |
|
448 /* rx fifo threshold */ |
|
449 RxCfgFIFOShift = 13, |
|
450 RxCfgFIFONone = (7 << RxCfgFIFOShift), |
|
451 |
|
452 /* Max DMA burst */ |
|
453 RxCfgDMAShift = 8, |
|
454 RxCfgDMAUnlimited = (7 << RxCfgDMAShift), |
|
455 |
|
456 /* rx ring buffer length */ |
|
457 RxCfgRcv8K = 0, |
|
458 RxCfgRcv16K = (1 << 11), |
|
459 RxCfgRcv32K = (1 << 12), |
|
460 RxCfgRcv64K = (1 << 11) | (1 << 12), |
|
461 |
|
462 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */ |
|
463 RxNoWrap = (1 << 7), |
|
464 }; |
|
465 |
|
466 /* Twister tuning parameters from RealTek. |
|
467 Completely undocumented, but required to tune bad links on some boards. */ |
|
468 enum CSCRBits { |
|
469 CSCR_LinkOKBit = 0x0400, |
|
470 CSCR_LinkChangeBit = 0x0800, |
|
471 CSCR_LinkStatusBits = 0x0f000, |
|
472 CSCR_LinkDownOffCmd = 0x003c0, |
|
473 CSCR_LinkDownCmd = 0x0f3c0, |
|
474 }; |
|
475 |
|
476 enum Cfg9346Bits { |
|
477 Cfg9346_Lock = 0x00, |
|
478 Cfg9346_Unlock = 0xC0, |
|
479 }; |
|
480 |
|
481 typedef enum { |
|
482 CH_8139 = 0, |
|
483 CH_8139_K, |
|
484 CH_8139A, |
|
485 CH_8139A_G, |
|
486 CH_8139B, |
|
487 CH_8130, |
|
488 CH_8139C, |
|
489 CH_8100, |
|
490 CH_8100B_8139D, |
|
491 CH_8101, |
|
492 } chip_t; |
|
493 |
|
494 enum chip_flags { |
|
495 HasHltClk = (1 << 0), |
|
496 HasLWake = (1 << 1), |
|
497 }; |
|
498 |
|
499 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \ |
|
500 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22) |
|
501 #define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1) |
|
502 |
|
503 /* directly indexed by chip_t, above */ |
|
504 static const struct { |
|
505 const char *name; |
|
506 u32 version; /* from RTL8139C/RTL8139D docs */ |
|
507 u32 flags; |
|
508 } rtl_chip_info[] = { |
|
509 { "RTL-8139", |
|
510 HW_REVID(1, 0, 0, 0, 0, 0, 0), |
|
511 HasHltClk, |
|
512 }, |
|
513 |
|
514 { "RTL-8139 rev K", |
|
515 HW_REVID(1, 1, 0, 0, 0, 0, 0), |
|
516 HasHltClk, |
|
517 }, |
|
518 |
|
519 { "RTL-8139A", |
|
520 HW_REVID(1, 1, 1, 0, 0, 0, 0), |
|
521 HasHltClk, /* XXX undocumented? */ |
|
522 }, |
|
523 |
|
524 { "RTL-8139A rev G", |
|
525 HW_REVID(1, 1, 1, 0, 0, 1, 0), |
|
526 HasHltClk, /* XXX undocumented? */ |
|
527 }, |
|
528 |
|
529 { "RTL-8139B", |
|
530 HW_REVID(1, 1, 1, 1, 0, 0, 0), |
|
531 HasLWake, |
|
532 }, |
|
533 |
|
534 { "RTL-8130", |
|
535 HW_REVID(1, 1, 1, 1, 1, 0, 0), |
|
536 HasLWake, |
|
537 }, |
|
538 |
|
539 { "RTL-8139C", |
|
540 HW_REVID(1, 1, 1, 0, 1, 0, 0), |
|
541 HasLWake, |
|
542 }, |
|
543 |
|
544 { "RTL-8100", |
|
545 HW_REVID(1, 1, 1, 1, 0, 1, 0), |
|
546 HasLWake, |
|
547 }, |
|
548 |
|
549 { "RTL-8100B/8139D", |
|
550 HW_REVID(1, 1, 1, 0, 1, 0, 1), |
|
551 HasHltClk /* XXX undocumented? */ |
|
552 | HasLWake, |
|
553 }, |
|
554 |
|
555 { "RTL-8101", |
|
556 HW_REVID(1, 1, 1, 0, 1, 1, 1), |
|
557 HasLWake, |
|
558 }, |
|
559 }; |
|
560 |
|
561 struct rtl_extra_stats { |
|
562 unsigned long early_rx; |
|
563 unsigned long tx_buf_mapped; |
|
564 unsigned long tx_timeouts; |
|
565 unsigned long rx_lost_in_ring; |
|
566 }; |
|
567 |
|
568 struct rtl8139_stats { |
|
569 u64 packets; |
|
570 u64 bytes; |
|
571 struct u64_stats_sync syncp; |
|
572 }; |
|
573 |
|
574 struct rtl8139_private { |
|
575 void __iomem *mmio_addr; |
|
576 int drv_flags; |
|
577 struct pci_dev *pci_dev; |
|
578 u32 msg_enable; |
|
579 struct napi_struct napi; |
|
580 struct net_device *dev; |
|
581 |
|
582 unsigned char *rx_ring; |
|
583 unsigned int cur_rx; /* RX buf index of next pkt */ |
|
584 struct rtl8139_stats rx_stats; |
|
585 dma_addr_t rx_ring_dma; |
|
586 |
|
587 unsigned int tx_flag; |
|
588 unsigned long cur_tx; |
|
589 unsigned long dirty_tx; |
|
590 struct rtl8139_stats tx_stats; |
|
591 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ |
|
592 unsigned char *tx_bufs; /* Tx bounce buffer region. */ |
|
593 dma_addr_t tx_bufs_dma; |
|
594 |
|
595 signed char phys[4]; /* MII device addresses. */ |
|
596 |
|
597 /* Twister tune state. */ |
|
598 char twistie, twist_row, twist_col; |
|
599 |
|
600 unsigned int watchdog_fired : 1; |
|
601 unsigned int default_port : 4; /* Last dev->if_port value. */ |
|
602 unsigned int have_thread : 1; |
|
603 |
|
604 spinlock_t lock; |
|
605 spinlock_t rx_lock; |
|
606 |
|
607 chip_t chipset; |
|
608 u32 rx_config; |
|
609 struct rtl_extra_stats xstats; |
|
610 |
|
611 struct delayed_work thread; |
|
612 |
|
613 struct mii_if_info mii; |
|
614 unsigned int regs_len; |
|
615 unsigned long fifo_copy_timeout; |
|
616 }; |
|
617 |
|
618 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>"); |
|
619 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver"); |
|
620 MODULE_LICENSE("GPL"); |
|
621 MODULE_VERSION(DRV_VERSION); |
|
622 |
|
623 module_param(use_io, bool, 0); |
|
624 MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO"); |
|
625 module_param(multicast_filter_limit, int, 0); |
|
626 module_param_array(media, int, NULL, 0); |
|
627 module_param_array(full_duplex, int, NULL, 0); |
|
628 module_param(debug, int, 0); |
|
629 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number"); |
|
630 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses"); |
|
631 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); |
|
632 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); |
|
633 |
|
634 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); |
|
635 static int rtl8139_open (struct net_device *dev); |
|
636 static int mdio_read (struct net_device *dev, int phy_id, int location); |
|
637 static void mdio_write (struct net_device *dev, int phy_id, int location, |
|
638 int val); |
|
639 static void rtl8139_start_thread(struct rtl8139_private *tp); |
|
640 static void rtl8139_tx_timeout (struct net_device *dev); |
|
641 static void rtl8139_init_ring (struct net_device *dev); |
|
642 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, |
|
643 struct net_device *dev); |
|
644 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
645 static void rtl8139_poll_controller(struct net_device *dev); |
|
646 #endif |
|
647 static int rtl8139_set_mac_address(struct net_device *dev, void *p); |
|
648 static int rtl8139_poll(struct napi_struct *napi, int budget); |
|
649 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance); |
|
650 static int rtl8139_close (struct net_device *dev); |
|
651 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); |
|
652 static struct rtnl_link_stats64 *rtl8139_get_stats64(struct net_device *dev, |
|
653 struct rtnl_link_stats64 |
|
654 *stats); |
|
655 static void rtl8139_set_rx_mode (struct net_device *dev); |
|
656 static void __set_rx_mode (struct net_device *dev); |
|
657 static void rtl8139_hw_start (struct net_device *dev); |
|
658 static void rtl8139_thread (struct work_struct *work); |
|
659 static void rtl8139_tx_timeout_task(struct work_struct *work); |
|
660 static const struct ethtool_ops rtl8139_ethtool_ops; |
|
661 |
|
662 /* write MMIO register, with flush */ |
|
663 /* Flush avoids rtl8139 bug w/ posted MMIO writes */ |
|
664 #define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) |
|
665 #define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) |
|
666 #define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) |
|
667 |
|
668 /* write MMIO register */ |
|
669 #define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) |
|
670 #define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) |
|
671 #define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) |
|
672 |
|
673 /* read MMIO register */ |
|
674 #define RTL_R8(reg) ioread8 (ioaddr + (reg)) |
|
675 #define RTL_R16(reg) ioread16 (ioaddr + (reg)) |
|
676 #define RTL_R32(reg) ioread32 (ioaddr + (reg)) |
|
677 |
|
678 |
|
679 static const u16 rtl8139_intr_mask = |
|
680 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | |
|
681 TxErr | TxOK | RxErr | RxOK; |
|
682 |
|
683 static const u16 rtl8139_norx_intr_mask = |
|
684 PCIErr | PCSTimeout | RxUnderrun | |
|
685 TxErr | TxOK | RxErr ; |
|
686 |
|
687 #if RX_BUF_IDX == 0 |
|
688 static const unsigned int rtl8139_rx_config = |
|
689 RxCfgRcv8K | RxNoWrap | |
|
690 (RX_FIFO_THRESH << RxCfgFIFOShift) | |
|
691 (RX_DMA_BURST << RxCfgDMAShift); |
|
692 #elif RX_BUF_IDX == 1 |
|
693 static const unsigned int rtl8139_rx_config = |
|
694 RxCfgRcv16K | RxNoWrap | |
|
695 (RX_FIFO_THRESH << RxCfgFIFOShift) | |
|
696 (RX_DMA_BURST << RxCfgDMAShift); |
|
697 #elif RX_BUF_IDX == 2 |
|
698 static const unsigned int rtl8139_rx_config = |
|
699 RxCfgRcv32K | RxNoWrap | |
|
700 (RX_FIFO_THRESH << RxCfgFIFOShift) | |
|
701 (RX_DMA_BURST << RxCfgDMAShift); |
|
702 #elif RX_BUF_IDX == 3 |
|
703 static const unsigned int rtl8139_rx_config = |
|
704 RxCfgRcv64K | |
|
705 (RX_FIFO_THRESH << RxCfgFIFOShift) | |
|
706 (RX_DMA_BURST << RxCfgDMAShift); |
|
707 #else |
|
708 #error "Invalid configuration for 8139_RXBUF_IDX" |
|
709 #endif |
|
710 |
|
711 static const unsigned int rtl8139_tx_config = |
|
712 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift); |
|
713 |
|
714 static void __rtl8139_cleanup_dev (struct net_device *dev) |
|
715 { |
|
716 struct rtl8139_private *tp = netdev_priv(dev); |
|
717 struct pci_dev *pdev; |
|
718 |
|
719 assert (dev != NULL); |
|
720 assert (tp->pci_dev != NULL); |
|
721 pdev = tp->pci_dev; |
|
722 |
|
723 if (tp->mmio_addr) |
|
724 pci_iounmap (pdev, tp->mmio_addr); |
|
725 |
|
726 /* it's ok to call this even if we have no regions to free */ |
|
727 pci_release_regions (pdev); |
|
728 |
|
729 free_netdev(dev); |
|
730 pci_set_drvdata (pdev, NULL); |
|
731 } |
|
732 |
|
733 |
|
734 static void rtl8139_chip_reset (void __iomem *ioaddr) |
|
735 { |
|
736 int i; |
|
737 |
|
738 /* Soft reset the chip. */ |
|
739 RTL_W8 (ChipCmd, CmdReset); |
|
740 |
|
741 /* Check that the chip has finished the reset. */ |
|
742 for (i = 1000; i > 0; i--) { |
|
743 barrier(); |
|
744 if ((RTL_R8 (ChipCmd) & CmdReset) == 0) |
|
745 break; |
|
746 udelay (10); |
|
747 } |
|
748 } |
|
749 |
|
750 |
|
751 static struct net_device *rtl8139_init_board(struct pci_dev *pdev) |
|
752 { |
|
753 struct device *d = &pdev->dev; |
|
754 void __iomem *ioaddr; |
|
755 struct net_device *dev; |
|
756 struct rtl8139_private *tp; |
|
757 u8 tmp8; |
|
758 int rc, disable_dev_on_err = 0; |
|
759 unsigned int i, bar; |
|
760 unsigned long io_len; |
|
761 u32 version; |
|
762 static const struct { |
|
763 unsigned long mask; |
|
764 char *type; |
|
765 } res[] = { |
|
766 { IORESOURCE_IO, "PIO" }, |
|
767 { IORESOURCE_MEM, "MMIO" } |
|
768 }; |
|
769 |
|
770 assert (pdev != NULL); |
|
771 |
|
772 /* dev and priv zeroed in alloc_etherdev */ |
|
773 dev = alloc_etherdev (sizeof (*tp)); |
|
774 if (dev == NULL) |
|
775 return ERR_PTR(-ENOMEM); |
|
776 |
|
777 SET_NETDEV_DEV(dev, &pdev->dev); |
|
778 |
|
779 tp = netdev_priv(dev); |
|
780 tp->pci_dev = pdev; |
|
781 |
|
782 /* enable device (incl. PCI PM wakeup and hotplug setup) */ |
|
783 rc = pci_enable_device (pdev); |
|
784 if (rc) |
|
785 goto err_out; |
|
786 |
|
787 rc = pci_request_regions (pdev, DRV_NAME); |
|
788 if (rc) |
|
789 goto err_out; |
|
790 disable_dev_on_err = 1; |
|
791 |
|
792 pci_set_master (pdev); |
|
793 |
|
794 retry: |
|
795 /* PIO bar register comes first. */ |
|
796 bar = !use_io; |
|
797 |
|
798 io_len = pci_resource_len(pdev, bar); |
|
799 |
|
800 dev_dbg(d, "%s region size = 0x%02lX\n", res[bar].type, io_len); |
|
801 |
|
802 if (!(pci_resource_flags(pdev, bar) & res[bar].mask)) { |
|
803 dev_err(d, "region #%d not a %s resource, aborting\n", bar, |
|
804 res[bar].type); |
|
805 rc = -ENODEV; |
|
806 goto err_out; |
|
807 } |
|
808 if (io_len < RTL_MIN_IO_SIZE) { |
|
809 dev_err(d, "Invalid PCI %s region size(s), aborting\n", |
|
810 res[bar].type); |
|
811 rc = -ENODEV; |
|
812 goto err_out; |
|
813 } |
|
814 |
|
815 ioaddr = pci_iomap(pdev, bar, 0); |
|
816 if (!ioaddr) { |
|
817 dev_err(d, "cannot map %s\n", res[bar].type); |
|
818 if (!use_io) { |
|
819 use_io = true; |
|
820 goto retry; |
|
821 } |
|
822 rc = -ENODEV; |
|
823 goto err_out; |
|
824 } |
|
825 tp->regs_len = io_len; |
|
826 tp->mmio_addr = ioaddr; |
|
827 |
|
828 /* Bring old chips out of low-power mode. */ |
|
829 RTL_W8 (HltClk, 'R'); |
|
830 |
|
831 /* check for missing/broken hardware */ |
|
832 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { |
|
833 dev_err(&pdev->dev, "Chip not responding, ignoring board\n"); |
|
834 rc = -EIO; |
|
835 goto err_out; |
|
836 } |
|
837 |
|
838 /* identify chip attached to board */ |
|
839 version = RTL_R32 (TxConfig) & HW_REVID_MASK; |
|
840 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++) |
|
841 if (version == rtl_chip_info[i].version) { |
|
842 tp->chipset = i; |
|
843 goto match; |
|
844 } |
|
845 |
|
846 /* if unknown chip, assume array element #0, original RTL-8139 in this case */ |
|
847 i = 0; |
|
848 dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n"); |
|
849 dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig)); |
|
850 tp->chipset = 0; |
|
851 |
|
852 match: |
|
853 pr_debug("chipset id (%d) == index %d, '%s'\n", |
|
854 version, i, rtl_chip_info[i].name); |
|
855 |
|
856 if (tp->chipset >= CH_8139B) { |
|
857 u8 new_tmp8 = tmp8 = RTL_R8 (Config1); |
|
858 pr_debug("PCI PM wakeup\n"); |
|
859 if ((rtl_chip_info[tp->chipset].flags & HasLWake) && |
|
860 (tmp8 & LWAKE)) |
|
861 new_tmp8 &= ~LWAKE; |
|
862 new_tmp8 |= Cfg1_PM_Enable; |
|
863 if (new_tmp8 != tmp8) { |
|
864 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
865 RTL_W8 (Config1, tmp8); |
|
866 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
867 } |
|
868 if (rtl_chip_info[tp->chipset].flags & HasLWake) { |
|
869 tmp8 = RTL_R8 (Config4); |
|
870 if (tmp8 & LWPTN) { |
|
871 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
872 RTL_W8 (Config4, tmp8 & ~LWPTN); |
|
873 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
874 } |
|
875 } |
|
876 } else { |
|
877 pr_debug("Old chip wakeup\n"); |
|
878 tmp8 = RTL_R8 (Config1); |
|
879 tmp8 &= ~(SLEEP | PWRDN); |
|
880 RTL_W8 (Config1, tmp8); |
|
881 } |
|
882 |
|
883 rtl8139_chip_reset (ioaddr); |
|
884 |
|
885 return dev; |
|
886 |
|
887 err_out: |
|
888 __rtl8139_cleanup_dev (dev); |
|
889 if (disable_dev_on_err) |
|
890 pci_disable_device (pdev); |
|
891 return ERR_PTR(rc); |
|
892 } |
|
893 |
|
894 static int rtl8139_set_features(struct net_device *dev, netdev_features_t features) |
|
895 { |
|
896 struct rtl8139_private *tp = netdev_priv(dev); |
|
897 unsigned long flags; |
|
898 netdev_features_t changed = features ^ dev->features; |
|
899 void __iomem *ioaddr = tp->mmio_addr; |
|
900 |
|
901 if (!(changed & (NETIF_F_RXALL))) |
|
902 return 0; |
|
903 |
|
904 spin_lock_irqsave(&tp->lock, flags); |
|
905 |
|
906 if (changed & NETIF_F_RXALL) { |
|
907 int rx_mode = tp->rx_config; |
|
908 if (features & NETIF_F_RXALL) |
|
909 rx_mode |= (AcceptErr | AcceptRunt); |
|
910 else |
|
911 rx_mode &= ~(AcceptErr | AcceptRunt); |
|
912 tp->rx_config = rtl8139_rx_config | rx_mode; |
|
913 RTL_W32_F(RxConfig, tp->rx_config); |
|
914 } |
|
915 |
|
916 spin_unlock_irqrestore(&tp->lock, flags); |
|
917 |
|
918 return 0; |
|
919 } |
|
920 |
|
921 static const struct net_device_ops rtl8139_netdev_ops = { |
|
922 .ndo_open = rtl8139_open, |
|
923 .ndo_stop = rtl8139_close, |
|
924 .ndo_get_stats64 = rtl8139_get_stats64, |
|
925 .ndo_change_mtu = eth_change_mtu, |
|
926 .ndo_validate_addr = eth_validate_addr, |
|
927 .ndo_set_mac_address = rtl8139_set_mac_address, |
|
928 .ndo_start_xmit = rtl8139_start_xmit, |
|
929 .ndo_set_rx_mode = rtl8139_set_rx_mode, |
|
930 .ndo_do_ioctl = netdev_ioctl, |
|
931 .ndo_tx_timeout = rtl8139_tx_timeout, |
|
932 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
933 .ndo_poll_controller = rtl8139_poll_controller, |
|
934 #endif |
|
935 .ndo_set_features = rtl8139_set_features, |
|
936 }; |
|
937 |
|
938 static int rtl8139_init_one(struct pci_dev *pdev, |
|
939 const struct pci_device_id *ent) |
|
940 { |
|
941 struct net_device *dev = NULL; |
|
942 struct rtl8139_private *tp; |
|
943 int i, addr_len, option; |
|
944 void __iomem *ioaddr; |
|
945 static int board_idx = -1; |
|
946 |
|
947 assert (pdev != NULL); |
|
948 assert (ent != NULL); |
|
949 |
|
950 board_idx++; |
|
951 |
|
952 /* when we're built into the kernel, the driver version message |
|
953 * is only printed if at least one 8139 board has been found |
|
954 */ |
|
955 #ifndef MODULE |
|
956 { |
|
957 static int printed_version; |
|
958 if (!printed_version++) |
|
959 pr_info(RTL8139_DRIVER_NAME "\n"); |
|
960 } |
|
961 #endif |
|
962 |
|
963 if (pdev->vendor == PCI_VENDOR_ID_REALTEK && |
|
964 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) { |
|
965 dev_info(&pdev->dev, |
|
966 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n", |
|
967 pdev->vendor, pdev->device, pdev->revision); |
|
968 return -ENODEV; |
|
969 } |
|
970 |
|
971 if (pdev->vendor == PCI_VENDOR_ID_REALTEK && |
|
972 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && |
|
973 pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS && |
|
974 pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) { |
|
975 pr_info("OQO Model 2 detected. Forcing PIO\n"); |
|
976 use_io = 1; |
|
977 } |
|
978 |
|
979 dev = rtl8139_init_board (pdev); |
|
980 if (IS_ERR(dev)) |
|
981 return PTR_ERR(dev); |
|
982 |
|
983 assert (dev != NULL); |
|
984 tp = netdev_priv(dev); |
|
985 tp->dev = dev; |
|
986 |
|
987 ioaddr = tp->mmio_addr; |
|
988 assert (ioaddr != NULL); |
|
989 |
|
990 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6; |
|
991 for (i = 0; i < 3; i++) |
|
992 ((__le16 *) (dev->dev_addr))[i] = |
|
993 cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len)); |
|
994 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
|
995 |
|
996 /* The Rtl8139-specific entries in the device structure. */ |
|
997 dev->netdev_ops = &rtl8139_netdev_ops; |
|
998 dev->ethtool_ops = &rtl8139_ethtool_ops; |
|
999 dev->watchdog_timeo = TX_TIMEOUT; |
|
1000 netif_napi_add(dev, &tp->napi, rtl8139_poll, 64); |
|
1001 |
|
1002 /* note: the hardware is not capable of sg/csum/highdma, however |
|
1003 * through the use of skb_copy_and_csum_dev we enable these |
|
1004 * features |
|
1005 */ |
|
1006 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; |
|
1007 dev->vlan_features = dev->features; |
|
1008 |
|
1009 dev->hw_features |= NETIF_F_RXALL; |
|
1010 dev->hw_features |= NETIF_F_RXFCS; |
|
1011 |
|
1012 /* tp zeroed and aligned in alloc_etherdev */ |
|
1013 tp = netdev_priv(dev); |
|
1014 |
|
1015 /* note: tp->chipset set in rtl8139_init_board */ |
|
1016 tp->drv_flags = board_info[ent->driver_data].hw_flags; |
|
1017 tp->mmio_addr = ioaddr; |
|
1018 tp->msg_enable = |
|
1019 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1)); |
|
1020 spin_lock_init (&tp->lock); |
|
1021 spin_lock_init (&tp->rx_lock); |
|
1022 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); |
|
1023 tp->mii.dev = dev; |
|
1024 tp->mii.mdio_read = mdio_read; |
|
1025 tp->mii.mdio_write = mdio_write; |
|
1026 tp->mii.phy_id_mask = 0x3f; |
|
1027 tp->mii.reg_num_mask = 0x1f; |
|
1028 |
|
1029 /* dev is fully set up and ready to use now */ |
|
1030 pr_debug("about to register device named %s (%p)...\n", |
|
1031 dev->name, dev); |
|
1032 i = register_netdev (dev); |
|
1033 if (i) goto err_out; |
|
1034 |
|
1035 pci_set_drvdata (pdev, dev); |
|
1036 |
|
1037 netdev_info(dev, "%s at 0x%p, %pM, IRQ %d\n", |
|
1038 board_info[ent->driver_data].name, |
|
1039 ioaddr, dev->dev_addr, pdev->irq); |
|
1040 |
|
1041 netdev_dbg(dev, "Identified 8139 chip type '%s'\n", |
|
1042 rtl_chip_info[tp->chipset].name); |
|
1043 |
|
1044 /* Find the connected MII xcvrs. |
|
1045 Doing this in open() would allow detecting external xcvrs later, but |
|
1046 takes too much time. */ |
|
1047 #ifdef CONFIG_8139TOO_8129 |
|
1048 if (tp->drv_flags & HAS_MII_XCVR) { |
|
1049 int phy, phy_idx = 0; |
|
1050 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) { |
|
1051 int mii_status = mdio_read(dev, phy, 1); |
|
1052 if (mii_status != 0xffff && mii_status != 0x0000) { |
|
1053 u16 advertising = mdio_read(dev, phy, 4); |
|
1054 tp->phys[phy_idx++] = phy; |
|
1055 netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n", |
|
1056 phy, mii_status, advertising); |
|
1057 } |
|
1058 } |
|
1059 if (phy_idx == 0) { |
|
1060 netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n"); |
|
1061 tp->phys[0] = 32; |
|
1062 } |
|
1063 } else |
|
1064 #endif |
|
1065 tp->phys[0] = 32; |
|
1066 tp->mii.phy_id = tp->phys[0]; |
|
1067 |
|
1068 /* The lower four bits are the media type. */ |
|
1069 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; |
|
1070 if (option > 0) { |
|
1071 tp->mii.full_duplex = (option & 0x210) ? 1 : 0; |
|
1072 tp->default_port = option & 0xFF; |
|
1073 if (tp->default_port) |
|
1074 tp->mii.force_media = 1; |
|
1075 } |
|
1076 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0) |
|
1077 tp->mii.full_duplex = full_duplex[board_idx]; |
|
1078 if (tp->mii.full_duplex) { |
|
1079 netdev_info(dev, "Media type forced to Full Duplex\n"); |
|
1080 /* Changing the MII-advertised media because might prevent |
|
1081 re-connection. */ |
|
1082 tp->mii.force_media = 1; |
|
1083 } |
|
1084 if (tp->default_port) { |
|
1085 netdev_info(dev, " Forcing %dMbps %s-duplex operation\n", |
|
1086 (option & 0x20 ? 100 : 10), |
|
1087 (option & 0x10 ? "full" : "half")); |
|
1088 mdio_write(dev, tp->phys[0], 0, |
|
1089 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */ |
|
1090 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */ |
|
1091 } |
|
1092 |
|
1093 /* Put the chip into low-power mode. */ |
|
1094 if (rtl_chip_info[tp->chipset].flags & HasHltClk) |
|
1095 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ |
|
1096 |
|
1097 return 0; |
|
1098 |
|
1099 err_out: |
|
1100 __rtl8139_cleanup_dev (dev); |
|
1101 pci_disable_device (pdev); |
|
1102 return i; |
|
1103 } |
|
1104 |
|
1105 |
|
1106 static void rtl8139_remove_one(struct pci_dev *pdev) |
|
1107 { |
|
1108 struct net_device *dev = pci_get_drvdata (pdev); |
|
1109 struct rtl8139_private *tp = netdev_priv(dev); |
|
1110 |
|
1111 assert (dev != NULL); |
|
1112 |
|
1113 cancel_delayed_work_sync(&tp->thread); |
|
1114 |
|
1115 unregister_netdev (dev); |
|
1116 |
|
1117 __rtl8139_cleanup_dev (dev); |
|
1118 pci_disable_device (pdev); |
|
1119 } |
|
1120 |
|
1121 |
|
1122 /* Serial EEPROM section. */ |
|
1123 |
|
1124 /* EEPROM_Ctrl bits. */ |
|
1125 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ |
|
1126 #define EE_CS 0x08 /* EEPROM chip select. */ |
|
1127 #define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */ |
|
1128 #define EE_WRITE_0 0x00 |
|
1129 #define EE_WRITE_1 0x02 |
|
1130 #define EE_DATA_READ 0x01 /* EEPROM chip data out. */ |
|
1131 #define EE_ENB (0x80 | EE_CS) |
|
1132 |
|
1133 /* Delay between EEPROM clock transitions. |
|
1134 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. |
|
1135 */ |
|
1136 |
|
1137 #define eeprom_delay() (void)RTL_R8(Cfg9346) |
|
1138 |
|
1139 /* The EEPROM commands include the alway-set leading bit. */ |
|
1140 #define EE_WRITE_CMD (5) |
|
1141 #define EE_READ_CMD (6) |
|
1142 #define EE_ERASE_CMD (7) |
|
1143 |
|
1144 static int read_eeprom(void __iomem *ioaddr, int location, int addr_len) |
|
1145 { |
|
1146 int i; |
|
1147 unsigned retval = 0; |
|
1148 int read_cmd = location | (EE_READ_CMD << addr_len); |
|
1149 |
|
1150 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); |
|
1151 RTL_W8 (Cfg9346, EE_ENB); |
|
1152 eeprom_delay (); |
|
1153 |
|
1154 /* Shift the read command bits out. */ |
|
1155 for (i = 4 + addr_len; i >= 0; i--) { |
|
1156 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; |
|
1157 RTL_W8 (Cfg9346, EE_ENB | dataval); |
|
1158 eeprom_delay (); |
|
1159 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); |
|
1160 eeprom_delay (); |
|
1161 } |
|
1162 RTL_W8 (Cfg9346, EE_ENB); |
|
1163 eeprom_delay (); |
|
1164 |
|
1165 for (i = 16; i > 0; i--) { |
|
1166 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); |
|
1167 eeprom_delay (); |
|
1168 retval = |
|
1169 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : |
|
1170 0); |
|
1171 RTL_W8 (Cfg9346, EE_ENB); |
|
1172 eeprom_delay (); |
|
1173 } |
|
1174 |
|
1175 /* Terminate the EEPROM access. */ |
|
1176 RTL_W8(Cfg9346, 0); |
|
1177 eeprom_delay (); |
|
1178 |
|
1179 return retval; |
|
1180 } |
|
1181 |
|
1182 /* MII serial management: mostly bogus for now. */ |
|
1183 /* Read and write the MII management registers using software-generated |
|
1184 serial MDIO protocol. |
|
1185 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually |
|
1186 met by back-to-back PCI I/O cycles, but we insert a delay to avoid |
|
1187 "overclocking" issues. */ |
|
1188 #define MDIO_DIR 0x80 |
|
1189 #define MDIO_DATA_OUT 0x04 |
|
1190 #define MDIO_DATA_IN 0x02 |
|
1191 #define MDIO_CLK 0x01 |
|
1192 #define MDIO_WRITE0 (MDIO_DIR) |
|
1193 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) |
|
1194 |
|
1195 #define mdio_delay() RTL_R8(Config4) |
|
1196 |
|
1197 |
|
1198 static const char mii_2_8139_map[8] = { |
|
1199 BasicModeCtrl, |
|
1200 BasicModeStatus, |
|
1201 0, |
|
1202 0, |
|
1203 NWayAdvert, |
|
1204 NWayLPAR, |
|
1205 NWayExpansion, |
|
1206 0 |
|
1207 }; |
|
1208 |
|
1209 |
|
1210 #ifdef CONFIG_8139TOO_8129 |
|
1211 /* Syncronize the MII management interface by shifting 32 one bits out. */ |
|
1212 static void mdio_sync (void __iomem *ioaddr) |
|
1213 { |
|
1214 int i; |
|
1215 |
|
1216 for (i = 32; i >= 0; i--) { |
|
1217 RTL_W8 (Config4, MDIO_WRITE1); |
|
1218 mdio_delay (); |
|
1219 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); |
|
1220 mdio_delay (); |
|
1221 } |
|
1222 } |
|
1223 #endif |
|
1224 |
|
1225 static int mdio_read (struct net_device *dev, int phy_id, int location) |
|
1226 { |
|
1227 struct rtl8139_private *tp = netdev_priv(dev); |
|
1228 int retval = 0; |
|
1229 #ifdef CONFIG_8139TOO_8129 |
|
1230 void __iomem *ioaddr = tp->mmio_addr; |
|
1231 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
|
1232 int i; |
|
1233 #endif |
|
1234 |
|
1235 if (phy_id > 31) { /* Really a 8139. Use internal registers. */ |
|
1236 void __iomem *ioaddr = tp->mmio_addr; |
|
1237 return location < 8 && mii_2_8139_map[location] ? |
|
1238 RTL_R16 (mii_2_8139_map[location]) : 0; |
|
1239 } |
|
1240 |
|
1241 #ifdef CONFIG_8139TOO_8129 |
|
1242 mdio_sync (ioaddr); |
|
1243 /* Shift the read command bits out. */ |
|
1244 for (i = 15; i >= 0; i--) { |
|
1245 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; |
|
1246 |
|
1247 RTL_W8 (Config4, MDIO_DIR | dataval); |
|
1248 mdio_delay (); |
|
1249 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); |
|
1250 mdio_delay (); |
|
1251 } |
|
1252 |
|
1253 /* Read the two transition, 16 data, and wire-idle bits. */ |
|
1254 for (i = 19; i > 0; i--) { |
|
1255 RTL_W8 (Config4, 0); |
|
1256 mdio_delay (); |
|
1257 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); |
|
1258 RTL_W8 (Config4, MDIO_CLK); |
|
1259 mdio_delay (); |
|
1260 } |
|
1261 #endif |
|
1262 |
|
1263 return (retval >> 1) & 0xffff; |
|
1264 } |
|
1265 |
|
1266 |
|
1267 static void mdio_write (struct net_device *dev, int phy_id, int location, |
|
1268 int value) |
|
1269 { |
|
1270 struct rtl8139_private *tp = netdev_priv(dev); |
|
1271 #ifdef CONFIG_8139TOO_8129 |
|
1272 void __iomem *ioaddr = tp->mmio_addr; |
|
1273 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; |
|
1274 int i; |
|
1275 #endif |
|
1276 |
|
1277 if (phy_id > 31) { /* Really a 8139. Use internal registers. */ |
|
1278 void __iomem *ioaddr = tp->mmio_addr; |
|
1279 if (location == 0) { |
|
1280 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
1281 RTL_W16 (BasicModeCtrl, value); |
|
1282 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
1283 } else if (location < 8 && mii_2_8139_map[location]) |
|
1284 RTL_W16 (mii_2_8139_map[location], value); |
|
1285 return; |
|
1286 } |
|
1287 |
|
1288 #ifdef CONFIG_8139TOO_8129 |
|
1289 mdio_sync (ioaddr); |
|
1290 |
|
1291 /* Shift the command bits out. */ |
|
1292 for (i = 31; i >= 0; i--) { |
|
1293 int dataval = |
|
1294 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
|
1295 RTL_W8 (Config4, dataval); |
|
1296 mdio_delay (); |
|
1297 RTL_W8 (Config4, dataval | MDIO_CLK); |
|
1298 mdio_delay (); |
|
1299 } |
|
1300 /* Clear out extra bits. */ |
|
1301 for (i = 2; i > 0; i--) { |
|
1302 RTL_W8 (Config4, 0); |
|
1303 mdio_delay (); |
|
1304 RTL_W8 (Config4, MDIO_CLK); |
|
1305 mdio_delay (); |
|
1306 } |
|
1307 #endif |
|
1308 } |
|
1309 |
|
1310 |
|
1311 static int rtl8139_open (struct net_device *dev) |
|
1312 { |
|
1313 struct rtl8139_private *tp = netdev_priv(dev); |
|
1314 void __iomem *ioaddr = tp->mmio_addr; |
|
1315 const int irq = tp->pci_dev->irq; |
|
1316 int retval; |
|
1317 |
|
1318 retval = request_irq(irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev); |
|
1319 if (retval) |
|
1320 return retval; |
|
1321 |
|
1322 tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, |
|
1323 &tp->tx_bufs_dma, GFP_KERNEL); |
|
1324 tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, |
|
1325 &tp->rx_ring_dma, GFP_KERNEL); |
|
1326 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { |
|
1327 free_irq(irq, dev); |
|
1328 |
|
1329 if (tp->tx_bufs) |
|
1330 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, |
|
1331 tp->tx_bufs, tp->tx_bufs_dma); |
|
1332 if (tp->rx_ring) |
|
1333 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, |
|
1334 tp->rx_ring, tp->rx_ring_dma); |
|
1335 |
|
1336 return -ENOMEM; |
|
1337 |
|
1338 } |
|
1339 |
|
1340 napi_enable(&tp->napi); |
|
1341 |
|
1342 tp->mii.full_duplex = tp->mii.force_media; |
|
1343 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; |
|
1344 |
|
1345 rtl8139_init_ring (dev); |
|
1346 rtl8139_hw_start (dev); |
|
1347 netif_start_queue (dev); |
|
1348 |
|
1349 netif_dbg(tp, ifup, dev, |
|
1350 "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n", |
|
1351 __func__, |
|
1352 (unsigned long long)pci_resource_start (tp->pci_dev, 1), |
|
1353 irq, RTL_R8 (MediaStatus), |
|
1354 tp->mii.full_duplex ? "full" : "half"); |
|
1355 |
|
1356 rtl8139_start_thread(tp); |
|
1357 |
|
1358 return 0; |
|
1359 } |
|
1360 |
|
1361 |
|
1362 static void rtl_check_media (struct net_device *dev, unsigned int init_media) |
|
1363 { |
|
1364 struct rtl8139_private *tp = netdev_priv(dev); |
|
1365 |
|
1366 if (tp->phys[0] >= 0) { |
|
1367 mii_check_media(&tp->mii, netif_msg_link(tp), init_media); |
|
1368 } |
|
1369 } |
|
1370 |
|
1371 /* Start the hardware at open or resume. */ |
|
1372 static void rtl8139_hw_start (struct net_device *dev) |
|
1373 { |
|
1374 struct rtl8139_private *tp = netdev_priv(dev); |
|
1375 void __iomem *ioaddr = tp->mmio_addr; |
|
1376 u32 i; |
|
1377 u8 tmp; |
|
1378 |
|
1379 /* Bring old chips out of low-power mode. */ |
|
1380 if (rtl_chip_info[tp->chipset].flags & HasHltClk) |
|
1381 RTL_W8 (HltClk, 'R'); |
|
1382 |
|
1383 rtl8139_chip_reset (ioaddr); |
|
1384 |
|
1385 /* unlock Config[01234] and BMCR register writes */ |
|
1386 RTL_W8_F (Cfg9346, Cfg9346_Unlock); |
|
1387 /* Restore our idea of the MAC address. */ |
|
1388 RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); |
|
1389 RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); |
|
1390 |
|
1391 tp->cur_rx = 0; |
|
1392 |
|
1393 /* init Rx ring buffer DMA address */ |
|
1394 RTL_W32_F (RxBuf, tp->rx_ring_dma); |
|
1395 |
|
1396 /* Must enable Tx/Rx before setting transfer thresholds! */ |
|
1397 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); |
|
1398 |
|
1399 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; |
|
1400 RTL_W32 (RxConfig, tp->rx_config); |
|
1401 RTL_W32 (TxConfig, rtl8139_tx_config); |
|
1402 |
|
1403 rtl_check_media (dev, 1); |
|
1404 |
|
1405 if (tp->chipset >= CH_8139B) { |
|
1406 /* Disable magic packet scanning, which is enabled |
|
1407 * when PM is enabled in Config1. It can be reenabled |
|
1408 * via ETHTOOL_SWOL if desired. */ |
|
1409 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic); |
|
1410 } |
|
1411 |
|
1412 netdev_dbg(dev, "init buffer addresses\n"); |
|
1413 |
|
1414 /* Lock Config[01234] and BMCR register writes */ |
|
1415 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
1416 |
|
1417 /* init Tx buffer DMA addresses */ |
|
1418 for (i = 0; i < NUM_TX_DESC; i++) |
|
1419 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); |
|
1420 |
|
1421 RTL_W32 (RxMissed, 0); |
|
1422 |
|
1423 rtl8139_set_rx_mode (dev); |
|
1424 |
|
1425 /* no early-rx interrupts */ |
|
1426 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear); |
|
1427 |
|
1428 /* make sure RxTx has started */ |
|
1429 tmp = RTL_R8 (ChipCmd); |
|
1430 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb))) |
|
1431 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); |
|
1432 |
|
1433 /* Enable all known interrupts by setting the interrupt mask. */ |
|
1434 RTL_W16 (IntrMask, rtl8139_intr_mask); |
|
1435 } |
|
1436 |
|
1437 |
|
1438 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
|
1439 static void rtl8139_init_ring (struct net_device *dev) |
|
1440 { |
|
1441 struct rtl8139_private *tp = netdev_priv(dev); |
|
1442 int i; |
|
1443 |
|
1444 tp->cur_rx = 0; |
|
1445 tp->cur_tx = 0; |
|
1446 tp->dirty_tx = 0; |
|
1447 |
|
1448 for (i = 0; i < NUM_TX_DESC; i++) |
|
1449 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; |
|
1450 } |
|
1451 |
|
1452 |
|
1453 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */ |
|
1454 static int next_tick = 3 * HZ; |
|
1455 |
|
1456 #ifndef CONFIG_8139TOO_TUNE_TWISTER |
|
1457 static inline void rtl8139_tune_twister (struct net_device *dev, |
|
1458 struct rtl8139_private *tp) {} |
|
1459 #else |
|
1460 enum TwisterParamVals { |
|
1461 PARA78_default = 0x78fa8388, |
|
1462 PARA7c_default = 0xcb38de43, /* param[0][3] */ |
|
1463 PARA7c_xxx = 0xcb38de43, |
|
1464 }; |
|
1465 |
|
1466 static const unsigned long param[4][4] = { |
|
1467 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, |
|
1468 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, |
|
1469 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, |
|
1470 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} |
|
1471 }; |
|
1472 |
|
1473 static void rtl8139_tune_twister (struct net_device *dev, |
|
1474 struct rtl8139_private *tp) |
|
1475 { |
|
1476 int linkcase; |
|
1477 void __iomem *ioaddr = tp->mmio_addr; |
|
1478 |
|
1479 /* This is a complicated state machine to configure the "twister" for |
|
1480 impedance/echos based on the cable length. |
|
1481 All of this is magic and undocumented. |
|
1482 */ |
|
1483 switch (tp->twistie) { |
|
1484 case 1: |
|
1485 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) { |
|
1486 /* We have link beat, let us tune the twister. */ |
|
1487 RTL_W16 (CSCR, CSCR_LinkDownOffCmd); |
|
1488 tp->twistie = 2; /* Change to state 2. */ |
|
1489 next_tick = HZ / 10; |
|
1490 } else { |
|
1491 /* Just put in some reasonable defaults for when beat returns. */ |
|
1492 RTL_W16 (CSCR, CSCR_LinkDownCmd); |
|
1493 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */ |
|
1494 RTL_W32 (PARA78, PARA78_default); |
|
1495 RTL_W32 (PARA7c, PARA7c_default); |
|
1496 tp->twistie = 0; /* Bail from future actions. */ |
|
1497 } |
|
1498 break; |
|
1499 case 2: |
|
1500 /* Read how long it took to hear the echo. */ |
|
1501 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits; |
|
1502 if (linkcase == 0x7000) |
|
1503 tp->twist_row = 3; |
|
1504 else if (linkcase == 0x3000) |
|
1505 tp->twist_row = 2; |
|
1506 else if (linkcase == 0x1000) |
|
1507 tp->twist_row = 1; |
|
1508 else |
|
1509 tp->twist_row = 0; |
|
1510 tp->twist_col = 0; |
|
1511 tp->twistie = 3; /* Change to state 2. */ |
|
1512 next_tick = HZ / 10; |
|
1513 break; |
|
1514 case 3: |
|
1515 /* Put out four tuning parameters, one per 100msec. */ |
|
1516 if (tp->twist_col == 0) |
|
1517 RTL_W16 (FIFOTMS, 0); |
|
1518 RTL_W32 (PARA7c, param[(int) tp->twist_row] |
|
1519 [(int) tp->twist_col]); |
|
1520 next_tick = HZ / 10; |
|
1521 if (++tp->twist_col >= 4) { |
|
1522 /* For short cables we are done. |
|
1523 For long cables (row == 3) check for mistune. */ |
|
1524 tp->twistie = |
|
1525 (tp->twist_row == 3) ? 4 : 0; |
|
1526 } |
|
1527 break; |
|
1528 case 4: |
|
1529 /* Special case for long cables: check for mistune. */ |
|
1530 if ((RTL_R16 (CSCR) & |
|
1531 CSCR_LinkStatusBits) == 0x7000) { |
|
1532 tp->twistie = 0; |
|
1533 break; |
|
1534 } else { |
|
1535 RTL_W32 (PARA7c, 0xfb38de03); |
|
1536 tp->twistie = 5; |
|
1537 next_tick = HZ / 10; |
|
1538 } |
|
1539 break; |
|
1540 case 5: |
|
1541 /* Retune for shorter cable (column 2). */ |
|
1542 RTL_W32 (FIFOTMS, 0x20); |
|
1543 RTL_W32 (PARA78, PARA78_default); |
|
1544 RTL_W32 (PARA7c, PARA7c_default); |
|
1545 RTL_W32 (FIFOTMS, 0x00); |
|
1546 tp->twist_row = 2; |
|
1547 tp->twist_col = 0; |
|
1548 tp->twistie = 3; |
|
1549 next_tick = HZ / 10; |
|
1550 break; |
|
1551 |
|
1552 default: |
|
1553 /* do nothing */ |
|
1554 break; |
|
1555 } |
|
1556 } |
|
1557 #endif /* CONFIG_8139TOO_TUNE_TWISTER */ |
|
1558 |
|
1559 static inline void rtl8139_thread_iter (struct net_device *dev, |
|
1560 struct rtl8139_private *tp, |
|
1561 void __iomem *ioaddr) |
|
1562 { |
|
1563 int mii_lpa; |
|
1564 |
|
1565 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA); |
|
1566 |
|
1567 if (!tp->mii.force_media && mii_lpa != 0xffff) { |
|
1568 int duplex = ((mii_lpa & LPA_100FULL) || |
|
1569 (mii_lpa & 0x01C0) == 0x0040); |
|
1570 if (tp->mii.full_duplex != duplex) { |
|
1571 tp->mii.full_duplex = duplex; |
|
1572 |
|
1573 if (mii_lpa) { |
|
1574 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n", |
|
1575 tp->mii.full_duplex ? "full" : "half", |
|
1576 tp->phys[0], mii_lpa); |
|
1577 } else { |
|
1578 netdev_info(dev, "media is unconnected, link down, or incompatible connection\n"); |
|
1579 } |
|
1580 #if 0 |
|
1581 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
1582 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20); |
|
1583 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
1584 #endif |
|
1585 } |
|
1586 } |
|
1587 |
|
1588 next_tick = HZ * 60; |
|
1589 |
|
1590 rtl8139_tune_twister (dev, tp); |
|
1591 |
|
1592 netdev_dbg(dev, "Media selection tick, Link partner %04x\n", |
|
1593 RTL_R16(NWayLPAR)); |
|
1594 netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n", |
|
1595 RTL_R16(IntrMask), RTL_R16(IntrStatus)); |
|
1596 netdev_dbg(dev, "Chip config %02x %02x\n", |
|
1597 RTL_R8(Config0), RTL_R8(Config1)); |
|
1598 } |
|
1599 |
|
1600 static void rtl8139_thread (struct work_struct *work) |
|
1601 { |
|
1602 struct rtl8139_private *tp = |
|
1603 container_of(work, struct rtl8139_private, thread.work); |
|
1604 struct net_device *dev = tp->mii.dev; |
|
1605 unsigned long thr_delay = next_tick; |
|
1606 |
|
1607 rtnl_lock(); |
|
1608 |
|
1609 if (!netif_running(dev)) |
|
1610 goto out_unlock; |
|
1611 |
|
1612 if (tp->watchdog_fired) { |
|
1613 tp->watchdog_fired = 0; |
|
1614 rtl8139_tx_timeout_task(work); |
|
1615 } else |
|
1616 rtl8139_thread_iter(dev, tp, tp->mmio_addr); |
|
1617 |
|
1618 if (tp->have_thread) |
|
1619 schedule_delayed_work(&tp->thread, thr_delay); |
|
1620 out_unlock: |
|
1621 rtnl_unlock (); |
|
1622 } |
|
1623 |
|
1624 static void rtl8139_start_thread(struct rtl8139_private *tp) |
|
1625 { |
|
1626 tp->twistie = 0; |
|
1627 if (tp->chipset == CH_8139_K) |
|
1628 tp->twistie = 1; |
|
1629 else if (tp->drv_flags & HAS_LNK_CHNG) |
|
1630 return; |
|
1631 |
|
1632 tp->have_thread = 1; |
|
1633 tp->watchdog_fired = 0; |
|
1634 |
|
1635 schedule_delayed_work(&tp->thread, next_tick); |
|
1636 } |
|
1637 |
|
1638 static inline void rtl8139_tx_clear (struct rtl8139_private *tp) |
|
1639 { |
|
1640 tp->cur_tx = 0; |
|
1641 tp->dirty_tx = 0; |
|
1642 |
|
1643 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */ |
|
1644 } |
|
1645 |
|
1646 static void rtl8139_tx_timeout_task (struct work_struct *work) |
|
1647 { |
|
1648 struct rtl8139_private *tp = |
|
1649 container_of(work, struct rtl8139_private, thread.work); |
|
1650 struct net_device *dev = tp->mii.dev; |
|
1651 void __iomem *ioaddr = tp->mmio_addr; |
|
1652 int i; |
|
1653 u8 tmp8; |
|
1654 |
|
1655 netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n", |
|
1656 RTL_R8(ChipCmd), RTL_R16(IntrStatus), |
|
1657 RTL_R16(IntrMask), RTL_R8(MediaStatus)); |
|
1658 /* Emit info to figure out what went wrong. */ |
|
1659 netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n", |
|
1660 tp->cur_tx, tp->dirty_tx); |
|
1661 for (i = 0; i < NUM_TX_DESC; i++) |
|
1662 netdev_dbg(dev, "Tx descriptor %d is %08x%s\n", |
|
1663 i, RTL_R32(TxStatus0 + (i * 4)), |
|
1664 i == tp->dirty_tx % NUM_TX_DESC ? |
|
1665 " (queue head)" : ""); |
|
1666 |
|
1667 tp->xstats.tx_timeouts++; |
|
1668 |
|
1669 /* disable Tx ASAP, if not already */ |
|
1670 tmp8 = RTL_R8 (ChipCmd); |
|
1671 if (tmp8 & CmdTxEnb) |
|
1672 RTL_W8 (ChipCmd, CmdRxEnb); |
|
1673 |
|
1674 spin_lock_bh(&tp->rx_lock); |
|
1675 /* Disable interrupts by clearing the interrupt mask. */ |
|
1676 RTL_W16 (IntrMask, 0x0000); |
|
1677 |
|
1678 /* Stop a shared interrupt from scavenging while we are. */ |
|
1679 spin_lock_irq(&tp->lock); |
|
1680 rtl8139_tx_clear (tp); |
|
1681 spin_unlock_irq(&tp->lock); |
|
1682 |
|
1683 /* ...and finally, reset everything */ |
|
1684 if (netif_running(dev)) { |
|
1685 rtl8139_hw_start (dev); |
|
1686 netif_wake_queue (dev); |
|
1687 } |
|
1688 spin_unlock_bh(&tp->rx_lock); |
|
1689 } |
|
1690 |
|
1691 static void rtl8139_tx_timeout (struct net_device *dev) |
|
1692 { |
|
1693 struct rtl8139_private *tp = netdev_priv(dev); |
|
1694 |
|
1695 tp->watchdog_fired = 1; |
|
1696 if (!tp->have_thread) { |
|
1697 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); |
|
1698 schedule_delayed_work(&tp->thread, next_tick); |
|
1699 } |
|
1700 } |
|
1701 |
|
1702 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, |
|
1703 struct net_device *dev) |
|
1704 { |
|
1705 struct rtl8139_private *tp = netdev_priv(dev); |
|
1706 void __iomem *ioaddr = tp->mmio_addr; |
|
1707 unsigned int entry; |
|
1708 unsigned int len = skb->len; |
|
1709 unsigned long flags; |
|
1710 |
|
1711 /* Calculate the next Tx descriptor entry. */ |
|
1712 entry = tp->cur_tx % NUM_TX_DESC; |
|
1713 |
|
1714 /* Note: the chip doesn't have auto-pad! */ |
|
1715 if (likely(len < TX_BUF_SIZE)) { |
|
1716 if (len < ETH_ZLEN) |
|
1717 memset(tp->tx_buf[entry], 0, ETH_ZLEN); |
|
1718 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]); |
|
1719 dev_kfree_skb(skb); |
|
1720 } else { |
|
1721 dev_kfree_skb(skb); |
|
1722 dev->stats.tx_dropped++; |
|
1723 return NETDEV_TX_OK; |
|
1724 } |
|
1725 |
|
1726 spin_lock_irqsave(&tp->lock, flags); |
|
1727 /* |
|
1728 * Writing to TxStatus triggers a DMA transfer of the data |
|
1729 * copied to tp->tx_buf[entry] above. Use a memory barrier |
|
1730 * to make sure that the device sees the updated data. |
|
1731 */ |
|
1732 wmb(); |
|
1733 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)), |
|
1734 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN)); |
|
1735 |
|
1736 tp->cur_tx++; |
|
1737 |
|
1738 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx) |
|
1739 netif_stop_queue (dev); |
|
1740 spin_unlock_irqrestore(&tp->lock, flags); |
|
1741 |
|
1742 netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n", |
|
1743 len, entry); |
|
1744 |
|
1745 return NETDEV_TX_OK; |
|
1746 } |
|
1747 |
|
1748 |
|
1749 static void rtl8139_tx_interrupt (struct net_device *dev, |
|
1750 struct rtl8139_private *tp, |
|
1751 void __iomem *ioaddr) |
|
1752 { |
|
1753 unsigned long dirty_tx, tx_left; |
|
1754 |
|
1755 assert (dev != NULL); |
|
1756 assert (ioaddr != NULL); |
|
1757 |
|
1758 dirty_tx = tp->dirty_tx; |
|
1759 tx_left = tp->cur_tx - dirty_tx; |
|
1760 while (tx_left > 0) { |
|
1761 int entry = dirty_tx % NUM_TX_DESC; |
|
1762 int txstatus; |
|
1763 |
|
1764 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32))); |
|
1765 |
|
1766 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) |
|
1767 break; /* It still hasn't been Txed */ |
|
1768 |
|
1769 /* Note: TxCarrierLost is always asserted at 100mbps. */ |
|
1770 if (txstatus & (TxOutOfWindow | TxAborted)) { |
|
1771 /* There was an major error, log it. */ |
|
1772 netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n", |
|
1773 txstatus); |
|
1774 dev->stats.tx_errors++; |
|
1775 if (txstatus & TxAborted) { |
|
1776 dev->stats.tx_aborted_errors++; |
|
1777 RTL_W32 (TxConfig, TxClearAbt); |
|
1778 RTL_W16 (IntrStatus, TxErr); |
|
1779 wmb(); |
|
1780 } |
|
1781 if (txstatus & TxCarrierLost) |
|
1782 dev->stats.tx_carrier_errors++; |
|
1783 if (txstatus & TxOutOfWindow) |
|
1784 dev->stats.tx_window_errors++; |
|
1785 } else { |
|
1786 if (txstatus & TxUnderrun) { |
|
1787 /* Add 64 to the Tx FIFO threshold. */ |
|
1788 if (tp->tx_flag < 0x00300000) |
|
1789 tp->tx_flag += 0x00020000; |
|
1790 dev->stats.tx_fifo_errors++; |
|
1791 } |
|
1792 dev->stats.collisions += (txstatus >> 24) & 15; |
|
1793 u64_stats_update_begin(&tp->tx_stats.syncp); |
|
1794 tp->tx_stats.packets++; |
|
1795 tp->tx_stats.bytes += txstatus & 0x7ff; |
|
1796 u64_stats_update_end(&tp->tx_stats.syncp); |
|
1797 } |
|
1798 |
|
1799 dirty_tx++; |
|
1800 tx_left--; |
|
1801 } |
|
1802 |
|
1803 #ifndef RTL8139_NDEBUG |
|
1804 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) { |
|
1805 netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n", |
|
1806 dirty_tx, tp->cur_tx); |
|
1807 dirty_tx += NUM_TX_DESC; |
|
1808 } |
|
1809 #endif /* RTL8139_NDEBUG */ |
|
1810 |
|
1811 /* only wake the queue if we did work, and the queue is stopped */ |
|
1812 if (tp->dirty_tx != dirty_tx) { |
|
1813 tp->dirty_tx = dirty_tx; |
|
1814 mb(); |
|
1815 netif_wake_queue (dev); |
|
1816 } |
|
1817 } |
|
1818 |
|
1819 |
|
1820 /* TODO: clean this up! Rx reset need not be this intensive */ |
|
1821 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, |
|
1822 struct rtl8139_private *tp, void __iomem *ioaddr) |
|
1823 { |
|
1824 u8 tmp8; |
|
1825 #ifdef CONFIG_8139_OLD_RX_RESET |
|
1826 int tmp_work; |
|
1827 #endif |
|
1828 |
|
1829 netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n", |
|
1830 rx_status); |
|
1831 dev->stats.rx_errors++; |
|
1832 if (!(rx_status & RxStatusOK)) { |
|
1833 if (rx_status & RxTooLong) { |
|
1834 netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n", |
|
1835 rx_status); |
|
1836 /* A.C.: The chip hangs here. */ |
|
1837 } |
|
1838 if (rx_status & (RxBadSymbol | RxBadAlign)) |
|
1839 dev->stats.rx_frame_errors++; |
|
1840 if (rx_status & (RxRunt | RxTooLong)) |
|
1841 dev->stats.rx_length_errors++; |
|
1842 if (rx_status & RxCRCErr) |
|
1843 dev->stats.rx_crc_errors++; |
|
1844 } else { |
|
1845 tp->xstats.rx_lost_in_ring++; |
|
1846 } |
|
1847 |
|
1848 #ifndef CONFIG_8139_OLD_RX_RESET |
|
1849 tmp8 = RTL_R8 (ChipCmd); |
|
1850 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb); |
|
1851 RTL_W8 (ChipCmd, tmp8); |
|
1852 RTL_W32 (RxConfig, tp->rx_config); |
|
1853 tp->cur_rx = 0; |
|
1854 #else |
|
1855 /* Reset the receiver, based on RealTek recommendation. (Bug?) */ |
|
1856 |
|
1857 /* disable receive */ |
|
1858 RTL_W8_F (ChipCmd, CmdTxEnb); |
|
1859 tmp_work = 200; |
|
1860 while (--tmp_work > 0) { |
|
1861 udelay(1); |
|
1862 tmp8 = RTL_R8 (ChipCmd); |
|
1863 if (!(tmp8 & CmdRxEnb)) |
|
1864 break; |
|
1865 } |
|
1866 if (tmp_work <= 0) |
|
1867 netdev_warn(dev, "rx stop wait too long\n"); |
|
1868 /* restart receive */ |
|
1869 tmp_work = 200; |
|
1870 while (--tmp_work > 0) { |
|
1871 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb); |
|
1872 udelay(1); |
|
1873 tmp8 = RTL_R8 (ChipCmd); |
|
1874 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) |
|
1875 break; |
|
1876 } |
|
1877 if (tmp_work <= 0) |
|
1878 netdev_warn(dev, "tx/rx enable wait too long\n"); |
|
1879 |
|
1880 /* and reinitialize all rx related registers */ |
|
1881 RTL_W8_F (Cfg9346, Cfg9346_Unlock); |
|
1882 /* Must enable Tx/Rx before setting transfer thresholds! */ |
|
1883 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); |
|
1884 |
|
1885 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; |
|
1886 RTL_W32 (RxConfig, tp->rx_config); |
|
1887 tp->cur_rx = 0; |
|
1888 |
|
1889 netdev_dbg(dev, "init buffer addresses\n"); |
|
1890 |
|
1891 /* Lock Config[01234] and BMCR register writes */ |
|
1892 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
1893 |
|
1894 /* init Rx ring buffer DMA address */ |
|
1895 RTL_W32_F (RxBuf, tp->rx_ring_dma); |
|
1896 |
|
1897 /* A.C.: Reset the multicast list. */ |
|
1898 __set_rx_mode (dev); |
|
1899 #endif |
|
1900 } |
|
1901 |
|
1902 #if RX_BUF_IDX == 3 |
|
1903 static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring, |
|
1904 u32 offset, unsigned int size) |
|
1905 { |
|
1906 u32 left = RX_BUF_LEN - offset; |
|
1907 |
|
1908 if (size > left) { |
|
1909 skb_copy_to_linear_data(skb, ring + offset, left); |
|
1910 skb_copy_to_linear_data_offset(skb, left, ring, size - left); |
|
1911 } else |
|
1912 skb_copy_to_linear_data(skb, ring + offset, size); |
|
1913 } |
|
1914 #endif |
|
1915 |
|
1916 static void rtl8139_isr_ack(struct rtl8139_private *tp) |
|
1917 { |
|
1918 void __iomem *ioaddr = tp->mmio_addr; |
|
1919 u16 status; |
|
1920 |
|
1921 status = RTL_R16 (IntrStatus) & RxAckBits; |
|
1922 |
|
1923 /* Clear out errors and receive interrupts */ |
|
1924 if (likely(status != 0)) { |
|
1925 if (unlikely(status & (RxFIFOOver | RxOverflow))) { |
|
1926 tp->dev->stats.rx_errors++; |
|
1927 if (status & RxFIFOOver) |
|
1928 tp->dev->stats.rx_fifo_errors++; |
|
1929 } |
|
1930 RTL_W16_F (IntrStatus, RxAckBits); |
|
1931 } |
|
1932 } |
|
1933 |
|
1934 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, |
|
1935 int budget) |
|
1936 { |
|
1937 void __iomem *ioaddr = tp->mmio_addr; |
|
1938 int received = 0; |
|
1939 unsigned char *rx_ring = tp->rx_ring; |
|
1940 unsigned int cur_rx = tp->cur_rx; |
|
1941 unsigned int rx_size = 0; |
|
1942 |
|
1943 netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", |
|
1944 __func__, (u16)cur_rx, |
|
1945 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); |
|
1946 |
|
1947 while (netif_running(dev) && received < budget && |
|
1948 (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) { |
|
1949 u32 ring_offset = cur_rx % RX_BUF_LEN; |
|
1950 u32 rx_status; |
|
1951 unsigned int pkt_size; |
|
1952 struct sk_buff *skb; |
|
1953 |
|
1954 rmb(); |
|
1955 |
|
1956 /* read size+status of next frame from DMA ring buffer */ |
|
1957 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset)); |
|
1958 rx_size = rx_status >> 16; |
|
1959 if (likely(!(dev->features & NETIF_F_RXFCS))) |
|
1960 pkt_size = rx_size - 4; |
|
1961 else |
|
1962 pkt_size = rx_size; |
|
1963 |
|
1964 netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n", |
|
1965 __func__, rx_status, rx_size, cur_rx); |
|
1966 #if RTL8139_DEBUG > 2 |
|
1967 print_hex_dump(KERN_DEBUG, "Frame contents: ", |
|
1968 DUMP_PREFIX_OFFSET, 16, 1, |
|
1969 &rx_ring[ring_offset], 70, true); |
|
1970 #endif |
|
1971 |
|
1972 /* Packet copy from FIFO still in progress. |
|
1973 * Theoretically, this should never happen |
|
1974 * since EarlyRx is disabled. |
|
1975 */ |
|
1976 if (unlikely(rx_size == 0xfff0)) { |
|
1977 if (!tp->fifo_copy_timeout) |
|
1978 tp->fifo_copy_timeout = jiffies + 2; |
|
1979 else if (time_after(jiffies, tp->fifo_copy_timeout)) { |
|
1980 netdev_dbg(dev, "hung FIFO. Reset\n"); |
|
1981 rx_size = 0; |
|
1982 goto no_early_rx; |
|
1983 } |
|
1984 netif_dbg(tp, intr, dev, "fifo copy in progress\n"); |
|
1985 tp->xstats.early_rx++; |
|
1986 break; |
|
1987 } |
|
1988 |
|
1989 no_early_rx: |
|
1990 tp->fifo_copy_timeout = 0; |
|
1991 |
|
1992 /* If Rx err or invalid rx_size/rx_status received |
|
1993 * (which happens if we get lost in the ring), |
|
1994 * Rx process gets reset, so we abort any further |
|
1995 * Rx processing. |
|
1996 */ |
|
1997 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) || |
|
1998 (rx_size < 8) || |
|
1999 (!(rx_status & RxStatusOK)))) { |
|
2000 if ((dev->features & NETIF_F_RXALL) && |
|
2001 (rx_size <= (MAX_ETH_FRAME_SIZE + 4)) && |
|
2002 (rx_size >= 8) && |
|
2003 (!(rx_status & RxStatusOK))) { |
|
2004 /* Length is at least mostly OK, but pkt has |
|
2005 * error. I'm hoping we can handle some of these |
|
2006 * errors without resetting the chip. --Ben |
|
2007 */ |
|
2008 dev->stats.rx_errors++; |
|
2009 if (rx_status & RxCRCErr) { |
|
2010 dev->stats.rx_crc_errors++; |
|
2011 goto keep_pkt; |
|
2012 } |
|
2013 if (rx_status & RxRunt) { |
|
2014 dev->stats.rx_length_errors++; |
|
2015 goto keep_pkt; |
|
2016 } |
|
2017 } |
|
2018 rtl8139_rx_err (rx_status, dev, tp, ioaddr); |
|
2019 received = -1; |
|
2020 goto out; |
|
2021 } |
|
2022 |
|
2023 keep_pkt: |
|
2024 /* Malloc up new buffer, compatible with net-2e. */ |
|
2025 /* Omit the four octet CRC from the length. */ |
|
2026 |
|
2027 skb = netdev_alloc_skb_ip_align(dev, pkt_size); |
|
2028 if (likely(skb)) { |
|
2029 #if RX_BUF_IDX == 3 |
|
2030 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size); |
|
2031 #else |
|
2032 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size); |
|
2033 #endif |
|
2034 skb_put (skb, pkt_size); |
|
2035 |
|
2036 skb->protocol = eth_type_trans (skb, dev); |
|
2037 |
|
2038 u64_stats_update_begin(&tp->rx_stats.syncp); |
|
2039 tp->rx_stats.packets++; |
|
2040 tp->rx_stats.bytes += pkt_size; |
|
2041 u64_stats_update_end(&tp->rx_stats.syncp); |
|
2042 |
|
2043 netif_receive_skb (skb); |
|
2044 } else { |
|
2045 if (net_ratelimit()) |
|
2046 netdev_warn(dev, "Memory squeeze, dropping packet\n"); |
|
2047 dev->stats.rx_dropped++; |
|
2048 } |
|
2049 received++; |
|
2050 |
|
2051 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; |
|
2052 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16)); |
|
2053 |
|
2054 rtl8139_isr_ack(tp); |
|
2055 } |
|
2056 |
|
2057 if (unlikely(!received || rx_size == 0xfff0)) |
|
2058 rtl8139_isr_ack(tp); |
|
2059 |
|
2060 netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", |
|
2061 __func__, cur_rx, |
|
2062 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); |
|
2063 |
|
2064 tp->cur_rx = cur_rx; |
|
2065 |
|
2066 /* |
|
2067 * The receive buffer should be mostly empty. |
|
2068 * Tell NAPI to reenable the Rx irq. |
|
2069 */ |
|
2070 if (tp->fifo_copy_timeout) |
|
2071 received = budget; |
|
2072 |
|
2073 out: |
|
2074 return received; |
|
2075 } |
|
2076 |
|
2077 |
|
2078 static void rtl8139_weird_interrupt (struct net_device *dev, |
|
2079 struct rtl8139_private *tp, |
|
2080 void __iomem *ioaddr, |
|
2081 int status, int link_changed) |
|
2082 { |
|
2083 netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status); |
|
2084 |
|
2085 assert (dev != NULL); |
|
2086 assert (tp != NULL); |
|
2087 assert (ioaddr != NULL); |
|
2088 |
|
2089 /* Update the error count. */ |
|
2090 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); |
|
2091 RTL_W32 (RxMissed, 0); |
|
2092 |
|
2093 if ((status & RxUnderrun) && link_changed && |
|
2094 (tp->drv_flags & HAS_LNK_CHNG)) { |
|
2095 rtl_check_media(dev, 0); |
|
2096 status &= ~RxUnderrun; |
|
2097 } |
|
2098 |
|
2099 if (status & (RxUnderrun | RxErr)) |
|
2100 dev->stats.rx_errors++; |
|
2101 |
|
2102 if (status & PCSTimeout) |
|
2103 dev->stats.rx_length_errors++; |
|
2104 if (status & RxUnderrun) |
|
2105 dev->stats.rx_fifo_errors++; |
|
2106 if (status & PCIErr) { |
|
2107 u16 pci_cmd_status; |
|
2108 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status); |
|
2109 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status); |
|
2110 |
|
2111 netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status); |
|
2112 } |
|
2113 } |
|
2114 |
|
2115 static int rtl8139_poll(struct napi_struct *napi, int budget) |
|
2116 { |
|
2117 struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi); |
|
2118 struct net_device *dev = tp->dev; |
|
2119 void __iomem *ioaddr = tp->mmio_addr; |
|
2120 int work_done; |
|
2121 |
|
2122 spin_lock(&tp->rx_lock); |
|
2123 work_done = 0; |
|
2124 if (likely(RTL_R16(IntrStatus) & RxAckBits)) |
|
2125 work_done += rtl8139_rx(dev, tp, budget); |
|
2126 |
|
2127 if (work_done < budget) { |
|
2128 unsigned long flags; |
|
2129 /* |
|
2130 * Order is important since data can get interrupted |
|
2131 * again when we think we are done. |
|
2132 */ |
|
2133 spin_lock_irqsave(&tp->lock, flags); |
|
2134 __napi_complete(napi); |
|
2135 RTL_W16_F(IntrMask, rtl8139_intr_mask); |
|
2136 spin_unlock_irqrestore(&tp->lock, flags); |
|
2137 } |
|
2138 spin_unlock(&tp->rx_lock); |
|
2139 |
|
2140 return work_done; |
|
2141 } |
|
2142 |
|
2143 /* The interrupt handler does all of the Rx thread work and cleans up |
|
2144 after the Tx thread. */ |
|
2145 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance) |
|
2146 { |
|
2147 struct net_device *dev = (struct net_device *) dev_instance; |
|
2148 struct rtl8139_private *tp = netdev_priv(dev); |
|
2149 void __iomem *ioaddr = tp->mmio_addr; |
|
2150 u16 status, ackstat; |
|
2151 int link_changed = 0; /* avoid bogus "uninit" warning */ |
|
2152 int handled = 0; |
|
2153 |
|
2154 spin_lock (&tp->lock); |
|
2155 status = RTL_R16 (IntrStatus); |
|
2156 |
|
2157 /* shared irq? */ |
|
2158 if (unlikely((status & rtl8139_intr_mask) == 0)) |
|
2159 goto out; |
|
2160 |
|
2161 handled = 1; |
|
2162 |
|
2163 /* h/w no longer present (hotplug?) or major error, bail */ |
|
2164 if (unlikely(status == 0xFFFF)) |
|
2165 goto out; |
|
2166 |
|
2167 /* close possible race's with dev_close */ |
|
2168 if (unlikely(!netif_running(dev))) { |
|
2169 RTL_W16 (IntrMask, 0); |
|
2170 goto out; |
|
2171 } |
|
2172 |
|
2173 /* Acknowledge all of the current interrupt sources ASAP, but |
|
2174 an first get an additional status bit from CSCR. */ |
|
2175 if (unlikely(status & RxUnderrun)) |
|
2176 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit; |
|
2177 |
|
2178 ackstat = status & ~(RxAckBits | TxErr); |
|
2179 if (ackstat) |
|
2180 RTL_W16 (IntrStatus, ackstat); |
|
2181 |
|
2182 /* Receive packets are processed by poll routine. |
|
2183 If not running start it now. */ |
|
2184 if (status & RxAckBits){ |
|
2185 if (napi_schedule_prep(&tp->napi)) { |
|
2186 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask); |
|
2187 __napi_schedule(&tp->napi); |
|
2188 } |
|
2189 } |
|
2190 |
|
2191 /* Check uncommon events with one test. */ |
|
2192 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr))) |
|
2193 rtl8139_weird_interrupt (dev, tp, ioaddr, |
|
2194 status, link_changed); |
|
2195 |
|
2196 if (status & (TxOK | TxErr)) { |
|
2197 rtl8139_tx_interrupt (dev, tp, ioaddr); |
|
2198 if (status & TxErr) |
|
2199 RTL_W16 (IntrStatus, TxErr); |
|
2200 } |
|
2201 out: |
|
2202 spin_unlock (&tp->lock); |
|
2203 |
|
2204 netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n", |
|
2205 RTL_R16(IntrStatus)); |
|
2206 return IRQ_RETVAL(handled); |
|
2207 } |
|
2208 |
|
2209 #ifdef CONFIG_NET_POLL_CONTROLLER |
|
2210 /* |
|
2211 * Polling receive - used by netconsole and other diagnostic tools |
|
2212 * to allow network i/o with interrupts disabled. |
|
2213 */ |
|
2214 static void rtl8139_poll_controller(struct net_device *dev) |
|
2215 { |
|
2216 struct rtl8139_private *tp = netdev_priv(dev); |
|
2217 const int irq = tp->pci_dev->irq; |
|
2218 |
|
2219 disable_irq(irq); |
|
2220 rtl8139_interrupt(irq, dev); |
|
2221 enable_irq(irq); |
|
2222 } |
|
2223 #endif |
|
2224 |
|
2225 static int rtl8139_set_mac_address(struct net_device *dev, void *p) |
|
2226 { |
|
2227 struct rtl8139_private *tp = netdev_priv(dev); |
|
2228 void __iomem *ioaddr = tp->mmio_addr; |
|
2229 struct sockaddr *addr = p; |
|
2230 |
|
2231 if (!is_valid_ether_addr(addr->sa_data)) |
|
2232 return -EADDRNOTAVAIL; |
|
2233 |
|
2234 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
|
2235 |
|
2236 spin_lock_irq(&tp->lock); |
|
2237 |
|
2238 RTL_W8_F(Cfg9346, Cfg9346_Unlock); |
|
2239 RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0))); |
|
2240 RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4))); |
|
2241 RTL_W8_F(Cfg9346, Cfg9346_Lock); |
|
2242 |
|
2243 spin_unlock_irq(&tp->lock); |
|
2244 |
|
2245 return 0; |
|
2246 } |
|
2247 |
|
2248 static int rtl8139_close (struct net_device *dev) |
|
2249 { |
|
2250 struct rtl8139_private *tp = netdev_priv(dev); |
|
2251 void __iomem *ioaddr = tp->mmio_addr; |
|
2252 unsigned long flags; |
|
2253 |
|
2254 netif_stop_queue(dev); |
|
2255 napi_disable(&tp->napi); |
|
2256 |
|
2257 netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n", |
|
2258 RTL_R16(IntrStatus)); |
|
2259 |
|
2260 spin_lock_irqsave (&tp->lock, flags); |
|
2261 |
|
2262 /* Stop the chip's Tx and Rx DMA processes. */ |
|
2263 RTL_W8 (ChipCmd, 0); |
|
2264 |
|
2265 /* Disable interrupts by clearing the interrupt mask. */ |
|
2266 RTL_W16 (IntrMask, 0); |
|
2267 |
|
2268 /* Update the error counts. */ |
|
2269 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); |
|
2270 RTL_W32 (RxMissed, 0); |
|
2271 |
|
2272 spin_unlock_irqrestore (&tp->lock, flags); |
|
2273 |
|
2274 free_irq(tp->pci_dev->irq, dev); |
|
2275 |
|
2276 rtl8139_tx_clear (tp); |
|
2277 |
|
2278 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, |
|
2279 tp->rx_ring, tp->rx_ring_dma); |
|
2280 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, |
|
2281 tp->tx_bufs, tp->tx_bufs_dma); |
|
2282 tp->rx_ring = NULL; |
|
2283 tp->tx_bufs = NULL; |
|
2284 |
|
2285 /* Green! Put the chip in low-power mode. */ |
|
2286 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
2287 |
|
2288 if (rtl_chip_info[tp->chipset].flags & HasHltClk) |
|
2289 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ |
|
2290 |
|
2291 return 0; |
|
2292 } |
|
2293 |
|
2294 |
|
2295 /* Get the ethtool Wake-on-LAN settings. Assumes that wol points to |
|
2296 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and |
|
2297 other threads or interrupts aren't messing with the 8139. */ |
|
2298 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
|
2299 { |
|
2300 struct rtl8139_private *tp = netdev_priv(dev); |
|
2301 void __iomem *ioaddr = tp->mmio_addr; |
|
2302 |
|
2303 spin_lock_irq(&tp->lock); |
|
2304 if (rtl_chip_info[tp->chipset].flags & HasLWake) { |
|
2305 u8 cfg3 = RTL_R8 (Config3); |
|
2306 u8 cfg5 = RTL_R8 (Config5); |
|
2307 |
|
2308 wol->supported = WAKE_PHY | WAKE_MAGIC |
|
2309 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; |
|
2310 |
|
2311 wol->wolopts = 0; |
|
2312 if (cfg3 & Cfg3_LinkUp) |
|
2313 wol->wolopts |= WAKE_PHY; |
|
2314 if (cfg3 & Cfg3_Magic) |
|
2315 wol->wolopts |= WAKE_MAGIC; |
|
2316 /* (KON)FIXME: See how netdev_set_wol() handles the |
|
2317 following constants. */ |
|
2318 if (cfg5 & Cfg5_UWF) |
|
2319 wol->wolopts |= WAKE_UCAST; |
|
2320 if (cfg5 & Cfg5_MWF) |
|
2321 wol->wolopts |= WAKE_MCAST; |
|
2322 if (cfg5 & Cfg5_BWF) |
|
2323 wol->wolopts |= WAKE_BCAST; |
|
2324 } |
|
2325 spin_unlock_irq(&tp->lock); |
|
2326 } |
|
2327 |
|
2328 |
|
2329 /* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes |
|
2330 that wol points to kernel memory and other threads or interrupts |
|
2331 aren't messing with the 8139. */ |
|
2332 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
|
2333 { |
|
2334 struct rtl8139_private *tp = netdev_priv(dev); |
|
2335 void __iomem *ioaddr = tp->mmio_addr; |
|
2336 u32 support; |
|
2337 u8 cfg3, cfg5; |
|
2338 |
|
2339 support = ((rtl_chip_info[tp->chipset].flags & HasLWake) |
|
2340 ? (WAKE_PHY | WAKE_MAGIC |
|
2341 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST) |
|
2342 : 0); |
|
2343 if (wol->wolopts & ~support) |
|
2344 return -EINVAL; |
|
2345 |
|
2346 spin_lock_irq(&tp->lock); |
|
2347 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic); |
|
2348 if (wol->wolopts & WAKE_PHY) |
|
2349 cfg3 |= Cfg3_LinkUp; |
|
2350 if (wol->wolopts & WAKE_MAGIC) |
|
2351 cfg3 |= Cfg3_Magic; |
|
2352 RTL_W8 (Cfg9346, Cfg9346_Unlock); |
|
2353 RTL_W8 (Config3, cfg3); |
|
2354 RTL_W8 (Cfg9346, Cfg9346_Lock); |
|
2355 |
|
2356 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF); |
|
2357 /* (KON)FIXME: These are untested. We may have to set the |
|
2358 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no |
|
2359 documentation. */ |
|
2360 if (wol->wolopts & WAKE_UCAST) |
|
2361 cfg5 |= Cfg5_UWF; |
|
2362 if (wol->wolopts & WAKE_MCAST) |
|
2363 cfg5 |= Cfg5_MWF; |
|
2364 if (wol->wolopts & WAKE_BCAST) |
|
2365 cfg5 |= Cfg5_BWF; |
|
2366 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */ |
|
2367 spin_unlock_irq(&tp->lock); |
|
2368 |
|
2369 return 0; |
|
2370 } |
|
2371 |
|
2372 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
|
2373 { |
|
2374 struct rtl8139_private *tp = netdev_priv(dev); |
|
2375 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
|
2376 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
|
2377 strlcpy(info->bus_info, pci_name(tp->pci_dev), sizeof(info->bus_info)); |
|
2378 info->regdump_len = tp->regs_len; |
|
2379 } |
|
2380 |
|
2381 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
|
2382 { |
|
2383 struct rtl8139_private *tp = netdev_priv(dev); |
|
2384 spin_lock_irq(&tp->lock); |
|
2385 mii_ethtool_gset(&tp->mii, cmd); |
|
2386 spin_unlock_irq(&tp->lock); |
|
2387 return 0; |
|
2388 } |
|
2389 |
|
2390 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
|
2391 { |
|
2392 struct rtl8139_private *tp = netdev_priv(dev); |
|
2393 int rc; |
|
2394 spin_lock_irq(&tp->lock); |
|
2395 rc = mii_ethtool_sset(&tp->mii, cmd); |
|
2396 spin_unlock_irq(&tp->lock); |
|
2397 return rc; |
|
2398 } |
|
2399 |
|
2400 static int rtl8139_nway_reset(struct net_device *dev) |
|
2401 { |
|
2402 struct rtl8139_private *tp = netdev_priv(dev); |
|
2403 return mii_nway_restart(&tp->mii); |
|
2404 } |
|
2405 |
|
2406 static u32 rtl8139_get_link(struct net_device *dev) |
|
2407 { |
|
2408 struct rtl8139_private *tp = netdev_priv(dev); |
|
2409 return mii_link_ok(&tp->mii); |
|
2410 } |
|
2411 |
|
2412 static u32 rtl8139_get_msglevel(struct net_device *dev) |
|
2413 { |
|
2414 struct rtl8139_private *tp = netdev_priv(dev); |
|
2415 return tp->msg_enable; |
|
2416 } |
|
2417 |
|
2418 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum) |
|
2419 { |
|
2420 struct rtl8139_private *tp = netdev_priv(dev); |
|
2421 tp->msg_enable = datum; |
|
2422 } |
|
2423 |
|
2424 static int rtl8139_get_regs_len(struct net_device *dev) |
|
2425 { |
|
2426 struct rtl8139_private *tp; |
|
2427 /* TODO: we are too slack to do reg dumping for pio, for now */ |
|
2428 if (use_io) |
|
2429 return 0; |
|
2430 tp = netdev_priv(dev); |
|
2431 return tp->regs_len; |
|
2432 } |
|
2433 |
|
2434 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) |
|
2435 { |
|
2436 struct rtl8139_private *tp; |
|
2437 |
|
2438 /* TODO: we are too slack to do reg dumping for pio, for now */ |
|
2439 if (use_io) |
|
2440 return; |
|
2441 tp = netdev_priv(dev); |
|
2442 |
|
2443 regs->version = RTL_REGS_VER; |
|
2444 |
|
2445 spin_lock_irq(&tp->lock); |
|
2446 memcpy_fromio(regbuf, tp->mmio_addr, regs->len); |
|
2447 spin_unlock_irq(&tp->lock); |
|
2448 } |
|
2449 |
|
2450 static int rtl8139_get_sset_count(struct net_device *dev, int sset) |
|
2451 { |
|
2452 switch (sset) { |
|
2453 case ETH_SS_STATS: |
|
2454 return RTL_NUM_STATS; |
|
2455 default: |
|
2456 return -EOPNOTSUPP; |
|
2457 } |
|
2458 } |
|
2459 |
|
2460 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) |
|
2461 { |
|
2462 struct rtl8139_private *tp = netdev_priv(dev); |
|
2463 |
|
2464 data[0] = tp->xstats.early_rx; |
|
2465 data[1] = tp->xstats.tx_buf_mapped; |
|
2466 data[2] = tp->xstats.tx_timeouts; |
|
2467 data[3] = tp->xstats.rx_lost_in_ring; |
|
2468 } |
|
2469 |
|
2470 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
|
2471 { |
|
2472 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys)); |
|
2473 } |
|
2474 |
|
2475 static const struct ethtool_ops rtl8139_ethtool_ops = { |
|
2476 .get_drvinfo = rtl8139_get_drvinfo, |
|
2477 .get_settings = rtl8139_get_settings, |
|
2478 .set_settings = rtl8139_set_settings, |
|
2479 .get_regs_len = rtl8139_get_regs_len, |
|
2480 .get_regs = rtl8139_get_regs, |
|
2481 .nway_reset = rtl8139_nway_reset, |
|
2482 .get_link = rtl8139_get_link, |
|
2483 .get_msglevel = rtl8139_get_msglevel, |
|
2484 .set_msglevel = rtl8139_set_msglevel, |
|
2485 .get_wol = rtl8139_get_wol, |
|
2486 .set_wol = rtl8139_set_wol, |
|
2487 .get_strings = rtl8139_get_strings, |
|
2488 .get_sset_count = rtl8139_get_sset_count, |
|
2489 .get_ethtool_stats = rtl8139_get_ethtool_stats, |
|
2490 }; |
|
2491 |
|
2492 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
|
2493 { |
|
2494 struct rtl8139_private *tp = netdev_priv(dev); |
|
2495 int rc; |
|
2496 |
|
2497 if (!netif_running(dev)) |
|
2498 return -EINVAL; |
|
2499 |
|
2500 spin_lock_irq(&tp->lock); |
|
2501 rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL); |
|
2502 spin_unlock_irq(&tp->lock); |
|
2503 |
|
2504 return rc; |
|
2505 } |
|
2506 |
|
2507 |
|
2508 static struct rtnl_link_stats64 * |
|
2509 rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) |
|
2510 { |
|
2511 struct rtl8139_private *tp = netdev_priv(dev); |
|
2512 void __iomem *ioaddr = tp->mmio_addr; |
|
2513 unsigned long flags; |
|
2514 unsigned int start; |
|
2515 |
|
2516 if (netif_running(dev)) { |
|
2517 spin_lock_irqsave (&tp->lock, flags); |
|
2518 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); |
|
2519 RTL_W32 (RxMissed, 0); |
|
2520 spin_unlock_irqrestore (&tp->lock, flags); |
|
2521 } |
|
2522 |
|
2523 netdev_stats_to_stats64(stats, &dev->stats); |
|
2524 |
|
2525 do { |
|
2526 start = u64_stats_fetch_begin_bh(&tp->rx_stats.syncp); |
|
2527 stats->rx_packets = tp->rx_stats.packets; |
|
2528 stats->rx_bytes = tp->rx_stats.bytes; |
|
2529 } while (u64_stats_fetch_retry_bh(&tp->rx_stats.syncp, start)); |
|
2530 |
|
2531 do { |
|
2532 start = u64_stats_fetch_begin_bh(&tp->tx_stats.syncp); |
|
2533 stats->tx_packets = tp->tx_stats.packets; |
|
2534 stats->tx_bytes = tp->tx_stats.bytes; |
|
2535 } while (u64_stats_fetch_retry_bh(&tp->tx_stats.syncp, start)); |
|
2536 |
|
2537 return stats; |
|
2538 } |
|
2539 |
|
2540 /* Set or clear the multicast filter for this adaptor. |
|
2541 This routine is not state sensitive and need not be SMP locked. */ |
|
2542 |
|
2543 static void __set_rx_mode (struct net_device *dev) |
|
2544 { |
|
2545 struct rtl8139_private *tp = netdev_priv(dev); |
|
2546 void __iomem *ioaddr = tp->mmio_addr; |
|
2547 u32 mc_filter[2]; /* Multicast hash filter */ |
|
2548 int rx_mode; |
|
2549 u32 tmp; |
|
2550 |
|
2551 netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n", |
|
2552 dev->flags, RTL_R32(RxConfig)); |
|
2553 |
|
2554 /* Note: do not reorder, GCC is clever about common statements. */ |
|
2555 if (dev->flags & IFF_PROMISC) { |
|
2556 rx_mode = |
|
2557 AcceptBroadcast | AcceptMulticast | AcceptMyPhys | |
|
2558 AcceptAllPhys; |
|
2559 mc_filter[1] = mc_filter[0] = 0xffffffff; |
|
2560 } else if ((netdev_mc_count(dev) > multicast_filter_limit) || |
|
2561 (dev->flags & IFF_ALLMULTI)) { |
|
2562 /* Too many to filter perfectly -- accept all multicasts. */ |
|
2563 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; |
|
2564 mc_filter[1] = mc_filter[0] = 0xffffffff; |
|
2565 } else { |
|
2566 struct netdev_hw_addr *ha; |
|
2567 rx_mode = AcceptBroadcast | AcceptMyPhys; |
|
2568 mc_filter[1] = mc_filter[0] = 0; |
|
2569 netdev_for_each_mc_addr(ha, dev) { |
|
2570 int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; |
|
2571 |
|
2572 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); |
|
2573 rx_mode |= AcceptMulticast; |
|
2574 } |
|
2575 } |
|
2576 |
|
2577 if (dev->features & NETIF_F_RXALL) |
|
2578 rx_mode |= (AcceptErr | AcceptRunt); |
|
2579 |
|
2580 /* We can safely update without stopping the chip. */ |
|
2581 tmp = rtl8139_rx_config | rx_mode; |
|
2582 if (tp->rx_config != tmp) { |
|
2583 RTL_W32_F (RxConfig, tmp); |
|
2584 tp->rx_config = tmp; |
|
2585 } |
|
2586 RTL_W32_F (MAR0 + 0, mc_filter[0]); |
|
2587 RTL_W32_F (MAR0 + 4, mc_filter[1]); |
|
2588 } |
|
2589 |
|
2590 static void rtl8139_set_rx_mode (struct net_device *dev) |
|
2591 { |
|
2592 unsigned long flags; |
|
2593 struct rtl8139_private *tp = netdev_priv(dev); |
|
2594 |
|
2595 spin_lock_irqsave (&tp->lock, flags); |
|
2596 __set_rx_mode(dev); |
|
2597 spin_unlock_irqrestore (&tp->lock, flags); |
|
2598 } |
|
2599 |
|
2600 #ifdef CONFIG_PM |
|
2601 |
|
2602 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) |
|
2603 { |
|
2604 struct net_device *dev = pci_get_drvdata (pdev); |
|
2605 struct rtl8139_private *tp = netdev_priv(dev); |
|
2606 void __iomem *ioaddr = tp->mmio_addr; |
|
2607 unsigned long flags; |
|
2608 |
|
2609 pci_save_state (pdev); |
|
2610 |
|
2611 if (!netif_running (dev)) |
|
2612 return 0; |
|
2613 |
|
2614 netif_device_detach (dev); |
|
2615 |
|
2616 spin_lock_irqsave (&tp->lock, flags); |
|
2617 |
|
2618 /* Disable interrupts, stop Tx and Rx. */ |
|
2619 RTL_W16 (IntrMask, 0); |
|
2620 RTL_W8 (ChipCmd, 0); |
|
2621 |
|
2622 /* Update the error counts. */ |
|
2623 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); |
|
2624 RTL_W32 (RxMissed, 0); |
|
2625 |
|
2626 spin_unlock_irqrestore (&tp->lock, flags); |
|
2627 |
|
2628 pci_set_power_state (pdev, PCI_D3hot); |
|
2629 |
|
2630 return 0; |
|
2631 } |
|
2632 |
|
2633 |
|
2634 static int rtl8139_resume (struct pci_dev *pdev) |
|
2635 { |
|
2636 struct net_device *dev = pci_get_drvdata (pdev); |
|
2637 |
|
2638 pci_restore_state (pdev); |
|
2639 if (!netif_running (dev)) |
|
2640 return 0; |
|
2641 pci_set_power_state (pdev, PCI_D0); |
|
2642 rtl8139_init_ring (dev); |
|
2643 rtl8139_hw_start (dev); |
|
2644 netif_device_attach (dev); |
|
2645 return 0; |
|
2646 } |
|
2647 |
|
2648 #endif /* CONFIG_PM */ |
|
2649 |
|
2650 |
|
2651 static struct pci_driver rtl8139_pci_driver = { |
|
2652 .name = DRV_NAME, |
|
2653 .id_table = rtl8139_pci_tbl, |
|
2654 .probe = rtl8139_init_one, |
|
2655 .remove = rtl8139_remove_one, |
|
2656 #ifdef CONFIG_PM |
|
2657 .suspend = rtl8139_suspend, |
|
2658 .resume = rtl8139_resume, |
|
2659 #endif /* CONFIG_PM */ |
|
2660 }; |
|
2661 |
|
2662 |
|
2663 static int __init rtl8139_init_module (void) |
|
2664 { |
|
2665 /* when we're a module, we always print a version message, |
|
2666 * even if no 8139 board is found. |
|
2667 */ |
|
2668 #ifdef MODULE |
|
2669 pr_info(RTL8139_DRIVER_NAME "\n"); |
|
2670 #endif |
|
2671 |
|
2672 return pci_register_driver(&rtl8139_pci_driver); |
|
2673 } |
|
2674 |
|
2675 |
|
2676 static void __exit rtl8139_cleanup_module (void) |
|
2677 { |
|
2678 pci_unregister_driver (&rtl8139_pci_driver); |
|
2679 } |
|
2680 |
|
2681 |
|
2682 module_init(rtl8139_init_module); |
|
2683 module_exit(rtl8139_cleanup_module); |