1

#------------------------------------------------------------------------------

     2

#

     3

#  EtherCAT master sysconfig file

     4

#

     5

#  $Id$

     6

#

     7

#  vim: spelllang=en spell tw=78

     8

#

     9

#------------------------------------------------------------------------------

    10

    11

#

    12

# Main Ethernet devices.

    13

#

    14

# The MASTER<X>_DEVICE variable specifies the Ethernet device for a master

    15

# with index 'X'.

    16

#

    17

# Specify the MAC address (hexadecimal with colons) of the Ethernet device to

    18

# use. Example: "00:00:08:44:ab:66"

    19

#

    20

# The broadcast address "ff:ff:ff:ff:ff:ff" has a special meaning: It tells

    21

# the master to accept the first device offered by any Ethernet driver.

    22

#

    23

# The MASTER<X>_DEVICE variables also determine, how many masters will be

    24

# created: A non-empty variable MASTER0_DEVICE will create one master, adding a

    25

# non-empty variable MASTER1_DEVICE will create a second master, and so on.

    26

#

    27

MASTER0_DEVICE=""

    28

#MASTER1_DEVICE=""

    29

    30

#

    31

# Backup Ethernet devices

    32

#

    33

# The MASTER<X>_BACKUP variables specify the devices used for redundancy. They

    34

# behaves nearly the same as the MASTER<X>_DEVICE variable, except that it

    35

# does not interpret the ff:ff:ff:ff:ff:ff address.

    36

#

    37

#MASTER0_BACKUP=""

    38

    39

#

    40

# Ethernet driver modules to use for EtherCAT operation.

    41

#

    42

# Specify a non-empty list of Ethernet drivers, that shall be used for EtherCAT

    43

# operation.

    44

#

    45

# Except for the generic Ethernet driver module, the init script will try to

    46

# unload the usual Ethernet driver modules in the list and replace them with

    47

# the EtherCAT-capable ones. If a certain (EtherCAT-capable) driver is not

    48

# found, a warning will appear.

    49

#

    50

# Possible values: 8139too, e100, e1000, e1000e, r8169, generic, ccat.

    51

# Separate multiple drivers with spaces.

    52

#

    53

# Note: The e100, e1000, e1000e, r8169 and ccat drivers are not built by

    54

# default. Enable them with the --enable-<driver> configure switches.

    55

#

    56

# Attention: When using the generic driver, the corresponding Ethernet device

    57

# has to be activated (with OS methods, for example 'ip link set ethX up'),

    58

# before the master is started, otherwise all frames will time out.

    59

#

    60

DEVICE_MODULES=""

    61

    62

#

    63

# Flags for loading kernel modules.

    64

#

    65

# This can usually be left empty. Adjust this variable, if you have problems

    66

# with module loading.

    67

#

    68

#MODPROBE_FLAGS="-b"

    69

    70

#------------------------------------------------------------------------------