1

/* Intel(R) Gigabit Ethernet Linux driver

     2

 * Copyright(c) 2007-2014 Intel Corporation.

     3

 * This program is free software; you can redistribute it and/or modify it

     4

 * under the terms and conditions of the GNU General Public License,

     5

 * version 2, as published by the Free Software Foundation.

     6

 *

     7

 * This program is distributed in the hope it will be useful, but WITHOUT

     8

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

     9

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    10

 * more details.

    11

 *

    12

 * You should have received a copy of the GNU General Public License along with

    13

 * this program; if not, see <http://www.gnu.org/licenses/>.

    14

 *

    15

 * The full GNU General Public License is included in this distribution in

    16

 * the file called "COPYING".

    17

 *

    18

 * Contact Information:

    19

 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    20

 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    21

 */

    22

    23

#include <linux/if_ether.h>

    24

#include <linux/delay.h>

    25

    26

#include "e1000_mac.h"

    27

#include "e1000_nvm.h"

    28

    29

/**

    30

 *  igb_raise_eec_clk - Raise EEPROM clock

    31

 *  @hw: pointer to the HW structure

    32

 *  @eecd: pointer to the EEPROM

    33

 *

    34

 *  Enable/Raise the EEPROM clock bit.

    35

 **/

    36

static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)

    37

{

    38

	*eecd = *eecd | E1000_EECD_SK;

    39

	wr32(E1000_EECD, *eecd);

    40

	wrfl();

    41

	udelay(hw->nvm.delay_usec);

    42

}

    43

    44

/**

    45

 *  igb_lower_eec_clk - Lower EEPROM clock

    46

 *  @hw: pointer to the HW structure

    47

 *  @eecd: pointer to the EEPROM

    48

 *

    49

 *  Clear/Lower the EEPROM clock bit.

    50

 **/

    51

static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)

    52

{

    53

	*eecd = *eecd & ~E1000_EECD_SK;

    54

	wr32(E1000_EECD, *eecd);

    55

	wrfl();

    56

	udelay(hw->nvm.delay_usec);

    57

}

    58

    59

/**

    60

 *  igb_shift_out_eec_bits - Shift data bits our to the EEPROM

    61

 *  @hw: pointer to the HW structure

    62

 *  @data: data to send to the EEPROM

    63

 *  @count: number of bits to shift out

    64

 *

    65

 *  We need to shift 'count' bits out to the EEPROM.  So, the value in the

    66

 *  "data" parameter will be shifted out to the EEPROM one bit at a time.

    67

 *  In order to do this, "data" must be broken down into bits.

    68

 **/

    69

static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)

    70

{

    71

	struct e1000_nvm_info *nvm = &hw->nvm;

    72

	u32 eecd = rd32(E1000_EECD);

    73

	u32 mask;

    74

    75

	mask = 0x01 << (count - 1);

    76

	if (nvm->type == e1000_nvm_eeprom_spi)

    77

		eecd |= E1000_EECD_DO;

    78

    79

	do {

    80

		eecd &= ~E1000_EECD_DI;

    81

    82

		if (data & mask)

    83

			eecd |= E1000_EECD_DI;

    84

    85

		wr32(E1000_EECD, eecd);

    86

		wrfl();

    87

    88

		udelay(nvm->delay_usec);

    89

    90

		igb_raise_eec_clk(hw, &eecd);

    91

		igb_lower_eec_clk(hw, &eecd);

    92

    93

		mask >>= 1;

    94

	} while (mask);

    95

    96

	eecd &= ~E1000_EECD_DI;

    97

	wr32(E1000_EECD, eecd);

    98

}

    99

   100

/**

   101

 *  igb_shift_in_eec_bits - Shift data bits in from the EEPROM

   102

 *  @hw: pointer to the HW structure

   103

 *  @count: number of bits to shift in

   104

 *

   105

 *  In order to read a register from the EEPROM, we need to shift 'count' bits

   106

 *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to

   107

 *  the EEPROM (setting the SK bit), and then reading the value of the data out

   108

 *  "DO" bit.  During this "shifting in" process the data in "DI" bit should

   109

 *  always be clear.

   110

 **/

   111

static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)

   112

{

   113

	u32 eecd;

   114

	u32 i;

   115

	u16 data;

   116

   117

	eecd = rd32(E1000_EECD);

   118

   119

	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);

   120

	data = 0;

   121

   122

	for (i = 0; i < count; i++) {

   123

		data <<= 1;

   124

		igb_raise_eec_clk(hw, &eecd);

   125

   126

		eecd = rd32(E1000_EECD);

   127

   128

		eecd &= ~E1000_EECD_DI;

   129

		if (eecd & E1000_EECD_DO)

   130

			data |= 1;

   131

   132

		igb_lower_eec_clk(hw, &eecd);

   133

	}

   134

   135

	return data;

   136

}

   137

   138

/**

   139

 *  igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion

   140

 *  @hw: pointer to the HW structure

   141

 *  @ee_reg: EEPROM flag for polling

   142

 *

   143

 *  Polls the EEPROM status bit for either read or write completion based

   144

 *  upon the value of 'ee_reg'.

   145

 **/

   146

static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)

   147

{

   148

	u32 attempts = 100000;

   149

	u32 i, reg = 0;

   150

	s32 ret_val = -E1000_ERR_NVM;

   151

   152

	for (i = 0; i < attempts; i++) {

   153

		if (ee_reg == E1000_NVM_POLL_READ)

   154

			reg = rd32(E1000_EERD);

   155

		else

   156

			reg = rd32(E1000_EEWR);

   157

   158

		if (reg & E1000_NVM_RW_REG_DONE) {

   159

			ret_val = 0;

   160

			break;

   161

		}

   162

   163

		udelay(5);

   164

	}

   165

   166

	return ret_val;

   167

}

   168

   169

/**

   170

 *  igb_acquire_nvm - Generic request for access to EEPROM

   171

 *  @hw: pointer to the HW structure

   172

 *

   173

 *  Set the EEPROM access request bit and wait for EEPROM access grant bit.

   174

 *  Return successful if access grant bit set, else clear the request for

   175

 *  EEPROM access and return -E1000_ERR_NVM (-1).

   176

 **/

   177

s32 igb_acquire_nvm(struct e1000_hw *hw)

   178

{

   179

	u32 eecd = rd32(E1000_EECD);

   180

	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;

   181

	s32 ret_val = 0;

   182

   183

   184

	wr32(E1000_EECD, eecd | E1000_EECD_REQ);

   185

	eecd = rd32(E1000_EECD);

   186

   187

	while (timeout) {

   188

		if (eecd & E1000_EECD_GNT)

   189

			break;

   190

		udelay(5);

   191

		eecd = rd32(E1000_EECD);

   192

		timeout--;

   193

	}

   194

   195

	if (!timeout) {

   196

		eecd &= ~E1000_EECD_REQ;

   197

		wr32(E1000_EECD, eecd);

   198

		hw_dbg("Could not acquire NVM grant\n");

   199

		ret_val = -E1000_ERR_NVM;

   200

	}

   201

   202

	return ret_val;

   203

}

   204

   205

/**

   206

 *  igb_standby_nvm - Return EEPROM to standby state

   207

 *  @hw: pointer to the HW structure

   208

 *

   209

 *  Return the EEPROM to a standby state.

   210

 **/

   211

static void igb_standby_nvm(struct e1000_hw *hw)

   212

{

   213

	struct e1000_nvm_info *nvm = &hw->nvm;

   214

	u32 eecd = rd32(E1000_EECD);

   215

   216

	if (nvm->type == e1000_nvm_eeprom_spi) {

   217

		/* Toggle CS to flush commands */

   218

		eecd |= E1000_EECD_CS;

   219

		wr32(E1000_EECD, eecd);

   220

		wrfl();

   221

		udelay(nvm->delay_usec);

   222

		eecd &= ~E1000_EECD_CS;

   223

		wr32(E1000_EECD, eecd);

   224

		wrfl();

   225

		udelay(nvm->delay_usec);

   226

	}

   227

}

   228

   229

/**

   230

 *  e1000_stop_nvm - Terminate EEPROM command

   231

 *  @hw: pointer to the HW structure

   232

 *

   233

 *  Terminates the current command by inverting the EEPROM's chip select pin.

   234

 **/

   235

static void e1000_stop_nvm(struct e1000_hw *hw)

   236

{

   237

	u32 eecd;

   238

   239

	eecd = rd32(E1000_EECD);

   240

	if (hw->nvm.type == e1000_nvm_eeprom_spi) {

   241

		/* Pull CS high */

   242

		eecd |= E1000_EECD_CS;

   243

		igb_lower_eec_clk(hw, &eecd);

   244

	}

   245

}

   246

   247

/**

   248

 *  igb_release_nvm - Release exclusive access to EEPROM

   249

 *  @hw: pointer to the HW structure

   250

 *

   251

 *  Stop any current commands to the EEPROM and clear the EEPROM request bit.

   252

 **/

   253

void igb_release_nvm(struct e1000_hw *hw)

   254

{

   255

	u32 eecd;

   256

   257

	e1000_stop_nvm(hw);

   258

   259

	eecd = rd32(E1000_EECD);

   260

	eecd &= ~E1000_EECD_REQ;

   261

	wr32(E1000_EECD, eecd);

   262

}

   263

   264

/**

   265

 *  igb_ready_nvm_eeprom - Prepares EEPROM for read/write

   266

 *  @hw: pointer to the HW structure

   267

 *

   268

 *  Setups the EEPROM for reading and writing.

   269

 **/

   270

static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)

   271

{

   272

	struct e1000_nvm_info *nvm = &hw->nvm;

   273

	u32 eecd = rd32(E1000_EECD);

   274

	s32 ret_val = 0;

   275

	u16 timeout = 0;

   276

	u8 spi_stat_reg;

   277

   278

   279

	if (nvm->type == e1000_nvm_eeprom_spi) {

   280

		/* Clear SK and CS */

   281

		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);

   282

		wr32(E1000_EECD, eecd);

   283

		wrfl();

   284

		udelay(1);

   285

		timeout = NVM_MAX_RETRY_SPI;

   286

   287

		/* Read "Status Register" repeatedly until the LSB is cleared.

   288

		 * The EEPROM will signal that the command has been completed

   289

		 * by clearing bit 0 of the internal status register.  If it's

   290

		 * not cleared within 'timeout', then error out.

   291

		 */

   292

		while (timeout) {

   293

			igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,

   294

					       hw->nvm.opcode_bits);

   295

			spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);

   296

			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))

   297

				break;

   298

   299

			udelay(5);

   300

			igb_standby_nvm(hw);

   301

			timeout--;

   302

		}

   303

   304

		if (!timeout) {

   305

			hw_dbg("SPI NVM Status error\n");

   306

			ret_val = -E1000_ERR_NVM;

   307

			goto out;

   308

		}

   309

	}

   310

   311

out:

   312

	return ret_val;

   313

}

   314

   315

/**

   316

 *  igb_read_nvm_spi - Read EEPROM's using SPI

   317

 *  @hw: pointer to the HW structure

   318

 *  @offset: offset of word in the EEPROM to read

   319

 *  @words: number of words to read

   320

 *  @data: word read from the EEPROM

   321

 *

   322

 *  Reads a 16 bit word from the EEPROM.

   323

 **/

   324

s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)

   325

{

   326

	struct e1000_nvm_info *nvm = &hw->nvm;

   327

	u32 i = 0;

   328

	s32 ret_val;

   329

	u16 word_in;

   330

	u8 read_opcode = NVM_READ_OPCODE_SPI;

   331

   332

	/* A check for invalid values:  offset too large, too many words,

   333

	 * and not enough words.

   334

	 */

   335

	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||

   336

	    (words == 0)) {

   337

		hw_dbg("nvm parameter(s) out of bounds\n");

   338

		ret_val = -E1000_ERR_NVM;

   339

		goto out;

   340

	}

   341

   342

	ret_val = nvm->ops.acquire(hw);

   343

	if (ret_val)

   344

		goto out;

   345

   346

	ret_val = igb_ready_nvm_eeprom(hw);

   347

	if (ret_val)

   348

		goto release;

   349

   350

	igb_standby_nvm(hw);

   351

   352

	if ((nvm->address_bits == 8) && (offset >= 128))

   353

		read_opcode |= NVM_A8_OPCODE_SPI;

   354

   355

	/* Send the READ command (opcode + addr) */

   356

	igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);

   357

	igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);

   358

   359

	/* Read the data.  SPI NVMs increment the address with each byte

   360

	 * read and will roll over if reading beyond the end.  This allows

   361

	 * us to read the whole NVM from any offset

   362

	 */

   363

	for (i = 0; i < words; i++) {

   364

		word_in = igb_shift_in_eec_bits(hw, 16);

   365

		data[i] = (word_in >> 8) | (word_in << 8);

   366

	}

   367

   368

release:

   369

	nvm->ops.release(hw);

   370

   371

out:

   372

	return ret_val;

   373

}

   374

   375

/**

   376

 *  igb_read_nvm_eerd - Reads EEPROM using EERD register

   377

 *  @hw: pointer to the HW structure

   378

 *  @offset: offset of word in the EEPROM to read

   379

 *  @words: number of words to read

   380

 *  @data: word read from the EEPROM

   381

 *

   382

 *  Reads a 16 bit word from the EEPROM using the EERD register.

   383

 **/

   384

s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)

   385

{

   386

	struct e1000_nvm_info *nvm = &hw->nvm;

   387

	u32 i, eerd = 0;

   388

	s32 ret_val = 0;

   389

   390

	/* A check for invalid values:  offset too large, too many words,

   391

	 * and not enough words.

   392

	 */

   393

	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||

   394

	    (words == 0)) {

   395

		hw_dbg("nvm parameter(s) out of bounds\n");

   396

		ret_val = -E1000_ERR_NVM;

   397

		goto out;

   398

	}

   399

   400

	for (i = 0; i < words; i++) {

   401

		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +

   402

			E1000_NVM_RW_REG_START;

   403

   404

		wr32(E1000_EERD, eerd);

   405

		ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);

   406

		if (ret_val)

   407

			break;

   408

   409

		data[i] = (rd32(E1000_EERD) >>

   410

			E1000_NVM_RW_REG_DATA);

   411

	}

   412

   413

out:

   414

	return ret_val;

   415

}

   416

   417

/**

   418

 *  igb_write_nvm_spi - Write to EEPROM using SPI

   419

 *  @hw: pointer to the HW structure

   420

 *  @offset: offset within the EEPROM to be written to

   421

 *  @words: number of words to write

   422

 *  @data: 16 bit word(s) to be written to the EEPROM

   423

 *

   424

 *  Writes data to EEPROM at offset using SPI interface.

   425

 *

   426

 *  If e1000_update_nvm_checksum is not called after this function , the

   427

 *  EEPROM will most likley contain an invalid checksum.

   428

 **/

   429

s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)

   430

{

   431

	struct e1000_nvm_info *nvm = &hw->nvm;

   432

	s32 ret_val = -E1000_ERR_NVM;

   433

	u16 widx = 0;

   434

   435

	/* A check for invalid values:  offset too large, too many words,

   436

	 * and not enough words.

   437

	 */

   438

	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||

   439

	    (words == 0)) {

   440

		hw_dbg("nvm parameter(s) out of bounds\n");

   441

		return ret_val;

   442

	}

   443

   444

	while (widx < words) {

   445

		u8 write_opcode = NVM_WRITE_OPCODE_SPI;

   446

   447

		ret_val = nvm->ops.acquire(hw);

   448

		if (ret_val)

   449

			return ret_val;

   450

   451

		ret_val = igb_ready_nvm_eeprom(hw);

   452

		if (ret_val) {

   453

			nvm->ops.release(hw);

   454

			return ret_val;

   455

		}

   456

   457

		igb_standby_nvm(hw);

   458

   459

		/* Send the WRITE ENABLE command (8 bit opcode) */

   460

		igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,

   461

					 nvm->opcode_bits);

   462

   463

		igb_standby_nvm(hw);

   464

   465

		/* Some SPI eeproms use the 8th address bit embedded in the

   466

		 * opcode

   467

		 */

   468

		if ((nvm->address_bits == 8) && (offset >= 128))

   469

			write_opcode |= NVM_A8_OPCODE_SPI;

   470

   471

		/* Send the Write command (8-bit opcode + addr) */

   472

		igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);

   473

		igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),

   474

					 nvm->address_bits);

   475

   476

		/* Loop to allow for up to whole page write of eeprom */

   477

		while (widx < words) {

   478

			u16 word_out = data[widx];

   479

   480

			word_out = (word_out >> 8) | (word_out << 8);

   481

			igb_shift_out_eec_bits(hw, word_out, 16);

   482

			widx++;

   483

   484

			if ((((offset + widx) * 2) % nvm->page_size) == 0) {

   485

				igb_standby_nvm(hw);

   486

				break;

   487

			}

   488

		}

   489

		usleep_range(1000, 2000);

   490

		nvm->ops.release(hw);

   491

	}

   492

   493

	return ret_val;

   494

}

   495

   496

/**

   497

 *  igb_read_part_string - Read device part number

   498

 *  @hw: pointer to the HW structure

   499

 *  @part_num: pointer to device part number

   500

 *  @part_num_size: size of part number buffer

   501

 *

   502

 *  Reads the product board assembly (PBA) number from the EEPROM and stores

   503

 *  the value in part_num.

   504

 **/

   505

s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)

   506

{

   507

	s32 ret_val;

   508

	u16 nvm_data;

   509

	u16 pointer;

   510

	u16 offset;

   511

	u16 length;

   512

   513

	if (part_num == NULL) {

   514

		hw_dbg("PBA string buffer was null\n");

   515

		ret_val = E1000_ERR_INVALID_ARGUMENT;

   516

		goto out;

   517

	}

   518

   519

	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);

   520

	if (ret_val) {

   521

		hw_dbg("NVM Read Error\n");

   522

		goto out;

   523

	}

   524

   525

	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);

   526

	if (ret_val) {

   527

		hw_dbg("NVM Read Error\n");

   528

		goto out;

   529

	}

   530