1

/*******************************************************************************

     2

     3

  Intel PRO/1000 Linux driver

     4

  Copyright(c) 1999 - 2012 Intel Corporation.

     5

     6

  This program is free software; you can redistribute it and/or modify it

     7

  under the terms and conditions of the GNU General Public License,

     8

  version 2, as published by the Free Software Foundation.

     9

    10

  This program is distributed in the hope it will be useful, but WITHOUT

    11

  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    12

  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    13

  more details.

    14

    15

  You should have received a copy of the GNU General Public License along with

    16

  this program; if not, write to the Free Software Foundation, Inc.,

    17

  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

    18

    19

  The full GNU General Public License is included in this distribution in

    20

  the file called "COPYING".

    21

    22

  Contact Information:

    23

  Linux NICS <linux.nics@intel.com>

    24

  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    25

  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    26

    27

*******************************************************************************/

    28

    29

#ifndef _E1000_DEFINES_H_

    30

#define _E1000_DEFINES_H_

    31

    32

#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */

    33

#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */

    34

#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */

    35

#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */

    36

#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */

    37

#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */

    38

#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */

    39

#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */

    40

#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */

    41

#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */

    42

#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */

    43

#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */

    44

#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */

    45

#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */

    46

#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */

    47

#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */

    48

#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */

    49

#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */

    50

    51

/* Number of Transmit and Receive Descriptors must be a multiple of 8 */

    52

#define REQ_TX_DESCRIPTOR_MULTIPLE  8

    53

#define REQ_RX_DESCRIPTOR_MULTIPLE  8

    54

    55

/* Definitions for power management and wakeup registers */

    56

/* Wake Up Control */

    57

#define E1000_WUC_APME       0x00000001 /* APM Enable */

    58

#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */

    59

#define E1000_WUC_PHY_WAKE   0x00000100 /* if PHY supports wakeup */

    60

    61

/* Wake Up Filter Control */

    62

#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */

    63

#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */

    64

#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */

    65

#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */

    66

#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */

    67

#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */

    68

    69

/* Wake Up Status */

    70

#define E1000_WUS_LNKC         E1000_WUFC_LNKC

    71

#define E1000_WUS_MAG          E1000_WUFC_MAG

    72

#define E1000_WUS_EX           E1000_WUFC_EX

    73

#define E1000_WUS_MC           E1000_WUFC_MC

    74

#define E1000_WUS_BC           E1000_WUFC_BC

    75

    76

/* Extended Device Control */

    77

#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */

    78

#define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */

    79

#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */

    80

#define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */

    81

#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */

    82

#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000

    83

#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000

    84

#define E1000_CTRL_EXT_EIAME          0x01000000

    85

#define E1000_CTRL_EXT_DRV_LOAD       0x10000000 /* Driver loaded bit for FW */

    86

#define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */

    87

#define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */

    88

#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */

    89

#define E1000_CTRL_EXT_LSECCK         0x00001000

    90

#define E1000_CTRL_EXT_PHYPDEN        0x00100000

    91

    92

/* Receive Descriptor bit definitions */

    93

#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */

    94

#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */

    95

#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */

    96

#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */

    97

#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */

    98

#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */

    99

#define E1000_RXD_ERR_CE        0x01    /* CRC Error */

   100

#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */

   101

#define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */

   102

#define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */

   103

#define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */

   104

#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */

   105

#define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */

   106

#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */

   107

   108

#define E1000_RXDEXT_STATERR_CE    0x01000000

   109

#define E1000_RXDEXT_STATERR_SE    0x02000000

   110

#define E1000_RXDEXT_STATERR_SEQ   0x04000000

   111

#define E1000_RXDEXT_STATERR_CXE   0x10000000

   112

#define E1000_RXDEXT_STATERR_RXE   0x80000000

   113

   114

/* mask to determine if packets should be dropped due to frame errors */

   115

#define E1000_RXD_ERR_FRAME_ERR_MASK ( \

   116

    E1000_RXD_ERR_CE  |                \

   117

    E1000_RXD_ERR_SE  |                \

   118

    E1000_RXD_ERR_SEQ |                \

   119

    E1000_RXD_ERR_CXE |                \

   120

    E1000_RXD_ERR_RXE)

   121

   122

/* Same mask, but for extended and packet split descriptors */

   123

#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \

   124

    E1000_RXDEXT_STATERR_CE  |            \

   125

    E1000_RXDEXT_STATERR_SE  |            \

   126

    E1000_RXDEXT_STATERR_SEQ |            \

   127

    E1000_RXDEXT_STATERR_CXE |            \

   128

    E1000_RXDEXT_STATERR_RXE)

   129

   130

#define E1000_MRQC_RSS_FIELD_MASK              0xFFFF0000

   131

#define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000

   132

#define E1000_MRQC_RSS_FIELD_IPV4              0x00020000

   133

#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX       0x00040000

   134

#define E1000_MRQC_RSS_FIELD_IPV6              0x00100000

   135

#define E1000_MRQC_RSS_FIELD_IPV6_TCP          0x00200000

   136

   137

#define E1000_RXDPS_HDRSTAT_HDRSP              0x00008000

   138

   139

/* Management Control */

   140

#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */

   141

#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */

   142

#define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */

   143

#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */

   144

#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */

   145

/* Enable MAC address filtering */

   146

#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000

   147

/* Enable MNG packets to host memory */

   148

#define E1000_MANC_EN_MNG2HOST   0x00200000

   149

   150

#define E1000_MANC2H_PORT_623    0x00000020 /* Port 0x26f */

   151

#define E1000_MANC2H_PORT_664    0x00000040 /* Port 0x298 */

   152

#define E1000_MDEF_PORT_623      0x00000800 /* Port 0x26f */

   153

#define E1000_MDEF_PORT_664      0x00000400 /* Port 0x298 */

   154

   155

/* Receive Control */

   156

#define E1000_RCTL_EN             0x00000002    /* enable */

   157

#define E1000_RCTL_SBP            0x00000004    /* store bad packet */

   158

#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */

   159

#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */

   160

#define E1000_RCTL_LPE            0x00000020    /* long packet enable */

   161

#define E1000_RCTL_LBM_NO         0x00000000    /* no loopback mode */

   162

#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */

   163

#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */

   164

#define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */

   165

#define E1000_RCTL_RDMTS_HALF     0x00000000    /* Rx desc min threshold size */

   166

#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */

   167

#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */

   168

#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */

   169

/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */

   170

#define E1000_RCTL_SZ_2048        0x00000000    /* Rx buffer size 2048 */

   171

#define E1000_RCTL_SZ_1024        0x00010000    /* Rx buffer size 1024 */

   172

#define E1000_RCTL_SZ_512         0x00020000    /* Rx buffer size 512 */

   173

#define E1000_RCTL_SZ_256         0x00030000    /* Rx buffer size 256 */

   174

/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */

   175

#define E1000_RCTL_SZ_16384       0x00010000    /* Rx buffer size 16384 */

   176

#define E1000_RCTL_SZ_8192        0x00020000    /* Rx buffer size 8192 */

   177

#define E1000_RCTL_SZ_4096        0x00030000    /* Rx buffer size 4096 */

   178

#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */

   179

#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */

   180

#define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */

   181

#define E1000_RCTL_DPF            0x00400000    /* Discard Pause Frames */

   182

#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */

   183

#define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */

   184

#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */

   185

   186

/*

   187

 * Use byte values for the following shift parameters

   188

 * Usage:

   189

 *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &

   190

 *                  E1000_PSRCTL_BSIZE0_MASK) |

   191

 *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &

   192

 *                  E1000_PSRCTL_BSIZE1_MASK) |

   193

 *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &

   194

 *                  E1000_PSRCTL_BSIZE2_MASK) |

   195

 *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;

   196

 *                  E1000_PSRCTL_BSIZE3_MASK))

   197

 * where value0 = [128..16256],  default=256

   198

 *       value1 = [1024..64512], default=4096

   199

 *       value2 = [0..64512],    default=4096

   200

 *       value3 = [0..64512],    default=0

   201

 */

   202

   203

#define E1000_PSRCTL_BSIZE0_MASK   0x0000007F

   204

#define E1000_PSRCTL_BSIZE1_MASK   0x00003F00

   205

#define E1000_PSRCTL_BSIZE2_MASK   0x003F0000

   206

#define E1000_PSRCTL_BSIZE3_MASK   0x3F000000

   207

   208

#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */

   209

#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */

   210

#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */

   211

#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */

   212

   213

/* SWFW_SYNC Definitions */

   214

#define E1000_SWFW_EEP_SM   0x1

   215

#define E1000_SWFW_PHY0_SM  0x2

   216

#define E1000_SWFW_PHY1_SM  0x4

   217

#define E1000_SWFW_CSR_SM   0x8

   218

   219

/* Device Control */

   220

#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */

   221

#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */

   222

#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */

   223

#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */

   224

#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */

   225

#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */

   226

#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */

   227

#define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */

   228

#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */

   229

#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */

   230

#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */

   231

#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */

   232

#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */

   233

#define E1000_CTRL_LANPHYPC_VALUE    0x00020000 /* SW value of LANPHYPC */

   234

#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */

   235

#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */

   236

#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */

   237

#define E1000_CTRL_RST      0x04000000  /* Global reset */

   238

#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */

   239

#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */

   240

#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */

   241

#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */

   242

   243

/*

   244

 * Bit definitions for the Management Data IO (MDIO) and Management Data

   245

 * Clock (MDC) pins in the Device Control Register.

   246

 */

   247

   248

/* Device Status */

   249

#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */

   250

#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */

   251

#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */

   252

#define E1000_STATUS_FUNC_SHIFT 2

   253

#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */

   254

#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */

   255

#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */

   256

#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */

   257

#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */

   258

#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */

   259

#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */

   260

#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */

   261

   262

/* Constants used to interpret the masked PCI-X bus speed. */

   263

   264

#define HALF_DUPLEX 1

   265

#define FULL_DUPLEX 2

   266

   267

   268

#define ADVERTISE_10_HALF                 0x0001

   269

#define ADVERTISE_10_FULL                 0x0002

   270

#define ADVERTISE_100_HALF                0x0004

   271

#define ADVERTISE_100_FULL                0x0008

   272

#define ADVERTISE_1000_HALF               0x0010 /* Not used, just FYI */

   273

#define ADVERTISE_1000_FULL               0x0020

   274

   275

/* 1000/H is not supported, nor spec-compliant. */

   276

#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF |   ADVERTISE_10_FULL | \

   277

				ADVERTISE_100_HALF |  ADVERTISE_100_FULL | \

   278

						     ADVERTISE_1000_FULL)

   279

#define E1000_ALL_NOT_GIG      ( ADVERTISE_10_HALF |   ADVERTISE_10_FULL | \

   280

				ADVERTISE_100_HALF |  ADVERTISE_100_FULL)

   281

#define E1000_ALL_100_SPEED    (ADVERTISE_100_HALF |  ADVERTISE_100_FULL)

   282

#define E1000_ALL_10_SPEED      (ADVERTISE_10_HALF |   ADVERTISE_10_FULL)

   283

#define E1000_ALL_HALF_DUPLEX   (ADVERTISE_10_HALF |  ADVERTISE_100_HALF)

   284

   285

#define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX

   286

   287

/* LED Control */

   288

#define E1000_PHY_LED0_MODE_MASK          0x00000007

   289

#define E1000_PHY_LED0_IVRT               0x00000008

   290

#define E1000_PHY_LED0_MASK               0x0000001F

   291

   292

#define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F

   293

#define E1000_LEDCTL_LED0_MODE_SHIFT      0

   294

#define E1000_LEDCTL_LED0_IVRT            0x00000040

   295

#define E1000_LEDCTL_LED0_BLINK           0x00000080

   296

   297

#define E1000_LEDCTL_MODE_LINK_UP       0x2

   298

#define E1000_LEDCTL_MODE_LED_ON        0xE

   299

#define E1000_LEDCTL_MODE_LED_OFF       0xF

   300

   301

/* Transmit Descriptor bit definitions */

   302

#define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */

   303

#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */

   304

#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */

   305

#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */

   306

#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */

   307

#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */

   308

#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */

   309

#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */

   310

#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */

   311

#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */

   312

#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */

   313

#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */

   314

#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */

   315

#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */

   316

#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */

   317

#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */

   318

#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */

   319

#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */

   320

#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */

   321

   322

/* Transmit Control */

   323

#define E1000_TCTL_EN     0x00000002    /* enable Tx */

   324

#define E1000_TCTL_PSP    0x00000008    /* pad short packets */

   325

#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */

   326

#define E1000_TCTL_COLD   0x003ff000    /* collision distance */

   327

#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */

   328

#define E1000_TCTL_MULR   0x10000000    /* Multiple request support */

   329

   330

/* Transmit Arbitration Count */

   331

   332

/* SerDes Control */

   333

#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400

   334

   335

/* Receive Checksum Control */

   336

#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */

   337

#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */

   338

#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */

   339

   340

/* Header split receive */

   341

#define E1000_RFCTL_NFSW_DIS            0x00000040

   342

#define E1000_RFCTL_NFSR_DIS            0x00000080

   343

#define E1000_RFCTL_ACK_DIS             0x00001000

   344

#define E1000_RFCTL_EXTEN               0x00008000

   345

#define E1000_RFCTL_IPV6_EX_DIS         0x00010000

   346

#define E1000_RFCTL_NEW_IPV6_EXT_DIS    0x00020000

   347

   348

/* Collision related configuration parameters */

   349

#define E1000_COLLISION_THRESHOLD       15

   350

#define E1000_CT_SHIFT                  4

   351

#define E1000_COLLISION_DISTANCE        63

   352

#define E1000_COLD_SHIFT                12

   353

   354

/* Default values for the transmit IPG register */

   355

#define DEFAULT_82543_TIPG_IPGT_COPPER 8

   356

   357

#define E1000_TIPG_IPGT_MASK  0x000003FF

   358

   359

#define DEFAULT_82543_TIPG_IPGR1 8

   360

#define E1000_TIPG_IPGR1_SHIFT  10

   361

   362

#define DEFAULT_82543_TIPG_IPGR2 6

   363

#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7

   364

#define E1000_TIPG_IPGR2_SHIFT  20

   365

   366

#define MAX_JUMBO_FRAME_SIZE    0x3F00

   367

   368

/* Extended Configuration Control and Size */

   369

#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020

   370

#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001

   371

#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008

   372

#define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020

   373

#define E1000_EXTCNF_CTRL_GATE_PHY_CFG           0x00000080

   374

#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000

   375

#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16

   376

#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK   0x0FFF0000

   377

#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT          16

   378

   379

#define E1000_PHY_CTRL_D0A_LPLU           0x00000002

   380

#define E1000_PHY_CTRL_NOND0A_LPLU        0x00000004

   381

#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008

   382

#define E1000_PHY_CTRL_GBE_DISABLE        0x00000040

   383

   384

#define E1000_KABGTXD_BGSQLBIAS           0x00050000

   385

   386

/* PBA constants */

   387

#define E1000_PBA_8K  0x0008    /* 8KB */

   388

#define E1000_PBA_16K 0x0010    /* 16KB */

   389

   390

#define E1000_PBS_16K E1000_PBA_16K

   391

   392

#define IFS_MAX       80

   393

#define IFS_MIN       40

   394

#define IFS_RATIO     4

   395

#define IFS_STEP      10

   396

#define MIN_NUM_XMITS 1000

   397

   398

/* SW Semaphore Register */

   399

#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */

   400

#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */

   401

#define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */

   402

   403

#define E1000_SWSM2_LOCK        0x00000002 /* Secondary driver semaphore bit */

   404

   405

/* Interrupt Cause Read */

   406

#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */

   407

#define E1000_ICR_LSC           0x00000004 /* Link Status Change */

   408

#define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */

   409

#define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */

   410

#define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */

   411

#define E1000_ICR_INT_ASSERTED  0x80000000 /* If this bit asserted, the driver should claim the interrupt */

   412

#define E1000_ICR_RXQ0          0x00100000 /* Rx Queue 0 Interrupt */

   413

#define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */

   414

#define E1000_ICR_TXQ0          0x00400000 /* Tx Queue 0 Interrupt */

   415

#define E1000_ICR_TXQ1          0x00800000 /* Tx Queue 1 Interrupt */

   416

#define E1000_ICR_OTHER         0x01000000 /* Other Interrupts */

   417

   418

/* PBA ECC Register */

   419

#define E1000_PBA_ECC_COUNTER_MASK  0xFFF00000 /* ECC counter mask */

   420

#define E1000_PBA_ECC_COUNTER_SHIFT 20         /* ECC counter shift value */

   421

#define E1000_PBA_ECC_CORR_EN       0x00000001 /* ECC correction enable */

   422

#define E1000_PBA_ECC_STAT_CLR      0x00000002 /* Clear ECC error counter */

   423

#define E1000_PBA_ECC_INT_EN        0x00000004 /* Enable ICR bit 5 for ECC */

   424

   425

/*

   426

 * This defines the bits that are set in the Interrupt Mask

   427

 * Set/Read Register.  Each bit is documented below:

   428

 *   o RXT0   = Receiver Timer Interrupt (ring 0)

   429

 *   o TXDW   = Transmit Descriptor Written Back

   430

 *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)

   431

 *   o RXSEQ  = Receive Sequence Error

   432

 *   o LSC    = Link Status Change

   433

 */

   434

#define IMS_ENABLE_MASK ( \

   435

    E1000_IMS_RXT0   |    \

   436

    E1000_IMS_TXDW   |    \

   437

    E1000_IMS_RXDMT0 |    \

   438

    E1000_IMS_RXSEQ  |    \

   439

    E1000_IMS_LSC)

   440

   441

/* Interrupt Mask Set */

   442

#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */

   443

#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */

   444

#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */

   445

#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */

   446

#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */

   447

#define E1000_IMS_RXQ0      E1000_ICR_RXQ0      /* Rx Queue 0 Interrupt */

   448

#define E1000_IMS_RXQ1      E1000_ICR_RXQ1      /* Rx Queue 1 Interrupt */

   449

#define E1000_IMS_TXQ0      E1000_ICR_TXQ0      /* Tx Queue 0 Interrupt */

   450

#define E1000_IMS_TXQ1      E1000_ICR_TXQ1      /* Tx Queue 1 Interrupt */

   451

#define E1000_IMS_OTHER     E1000_ICR_OTHER     /* Other Interrupts */

   452

   453

/* Interrupt Cause Set */

   454

#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */

   455

#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */

   456

#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */

   457

   458

/* Transmit Descriptor Control */

   459

#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */

   460

#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */

   461

#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */

   462

#define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */

   463

#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */

   464

#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */

   465

/* Enable the counting of desc. still to be processed. */

   466

#define E1000_TXDCTL_COUNT_DESC 0x00400000

   467

   468

/* Flow Control Constants */

   469

#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001

   470

#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100

   471

#define FLOW_CONTROL_TYPE         0x8808

   472

   473

/* 802.1q VLAN Packet Size */

   474

#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */

   475

   476

/* Receive Address */

   477

/*

   478

 * Number of high/low register pairs in the RAR. The RAR (Receive Address

   479

 * Registers) holds the directed and multicast addresses that we monitor.

   480

 * Technically, we have 16 spots.  However, we reserve one of these spots

   481

 * (RAR[15]) for our directed address used by controllers with

   482

 * manageability enabled, allowing us room for 15 multicast addresses.

   483

 */

   484

#define E1000_RAR_ENTRIES     15

   485

#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */

   486

#define E1000_RAL_MAC_ADDR_LEN 4

   487

#define E1000_RAH_MAC_ADDR_LEN 2

   488

   489

/* Error Codes */

   490

#define E1000_ERR_NVM      1

   491

#define E1000_ERR_PHY      2

   492

#define E1000_ERR_CONFIG   3

   493

#define E1000_ERR_PARAM    4

   494

#define E1000_ERR_MAC_INIT 5

   495

#define E1000_ERR_PHY_TYPE 6

   496

#define E1000_ERR_RESET   9

   497

#define E1000_ERR_MASTER_REQUESTS_PENDING 10

   498

#define E1000_ERR_HOST_INTERFACE_COMMAND 11

   499

#define E1000_BLK_PHY_RESET   12

   500

#define E1000_ERR_SWFW_SYNC 13

   501

#define E1000_NOT_IMPLEMENTED 14

   502

#define E1000_ERR_INVALID_ARGUMENT  16

   503

#define E1000_ERR_NO_SPACE          17

   504

#define E1000_ERR_NVM_PBA_SECTION   18

   505

   506

/* Loop limit on how long we wait for auto-negotiation to complete */

   507

#define FIBER_LINK_UP_LIMIT               50

   508

#define COPPER_LINK_UP_LIMIT              10

   509

#define PHY_AUTO_NEG_LIMIT                45

   510

#define PHY_FORCE_LIMIT                   20

   511

/* Number of 100 microseconds we wait for PCI Express master disable */

   512

#define MASTER_DISABLE_TIMEOUT      800

   513

/* Number of milliseconds we wait for PHY configuration done after MAC reset */

   514

#define PHY_CFG_TIMEOUT             100

   515

/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */

   516

#define MDIO_OWNERSHIP_TIMEOUT      10

   517

/* Number of milliseconds for NVM auto read done after MAC reset. */

   518

#define AUTO_READ_DONE_TIMEOUT      10

   519

   520

/* Flow Control */

   521

#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */

   522

#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */

   523

#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */

   524

   525

/* Transmit Configuration Word */

   526

#define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */

   527

#define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */

   528

#define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */

   529

#define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */