1

/* Intel PRO/1000 Linux driver

     2

 * Copyright(c) 1999 - 2014 Intel Corporation.

     3

 *

     4

 * This program is free software; you can redistribute it and/or modify it

     5

 * under the terms and conditions of the GNU General Public License,

     6

 * version 2, as published by the Free Software Foundation.

     7

 *

     8

 * This program is distributed in the hope it will be useful, but WITHOUT

     9

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    10

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    11

 * more details.

    12

 *

    13

 * The full GNU General Public License is included in this distribution in

    14

 * the file called "COPYING".

    15

 *

    16

 * Contact Information:

    17

 * Linux NICS <linux.nics@intel.com>

    18

 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    19

 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    20

 */

    21

    22

#ifndef _E1000_DEFINES_H_

    23

#define _E1000_DEFINES_H_

    24

    25

/* Number of Transmit and Receive Descriptors must be a multiple of 8 */

    26

#define REQ_TX_DESCRIPTOR_MULTIPLE  8

    27

#define REQ_RX_DESCRIPTOR_MULTIPLE  8

    28

    29

/* Definitions for power management and wakeup registers */

    30

/* Wake Up Control */

    31

#define E1000_WUC_APME		0x00000001	/* APM Enable */

    32

#define E1000_WUC_PME_EN	0x00000002	/* PME Enable */

    33

#define E1000_WUC_PME_STATUS	0x00000004	/* PME Status */

    34

#define E1000_WUC_APMPME	0x00000008	/* Assert PME on APM Wakeup */

    35

#define E1000_WUC_PHY_WAKE	0x00000100	/* if PHY supports wakeup */

    36

    37

/* Wake Up Filter Control */

    38

#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */

    39

#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */

    40

#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */

    41

#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */

    42

#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */

    43

#define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */

    44

    45

/* Wake Up Status */

    46

#define E1000_WUS_LNKC         E1000_WUFC_LNKC

    47

#define E1000_WUS_MAG          E1000_WUFC_MAG

    48

#define E1000_WUS_EX           E1000_WUFC_EX

    49

#define E1000_WUS_MC           E1000_WUFC_MC

    50

#define E1000_WUS_BC           E1000_WUFC_BC

    51

    52

/* Extended Device Control */

    53

#define E1000_CTRL_EXT_LPCD  0x00000004     /* LCD Power Cycle Done */

    54

#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */

    55

#define E1000_CTRL_EXT_FORCE_SMBUS 0x00000800 /* Force SMBus mode */

    56

#define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */

    57

#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */

    58

#define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */

    59

#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */

    60

#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000

    61

#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000

    62

#define E1000_CTRL_EXT_EIAME          0x01000000

    63

#define E1000_CTRL_EXT_DRV_LOAD       0x10000000 /* Driver loaded bit for FW */

    64

#define E1000_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */

    65

#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */

    66

#define E1000_CTRL_EXT_LSECCK         0x00001000

    67

#define E1000_CTRL_EXT_PHYPDEN        0x00100000

    68

    69

/* Receive Descriptor bit definitions */

    70

#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */

    71

#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */

    72

#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */

    73

#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */

    74

#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */

    75

#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */

    76

#define E1000_RXD_ERR_CE        0x01    /* CRC Error */

    77

#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */

    78

#define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */

    79

#define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */

    80

#define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */

    81

#define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */

    82

#define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */

    83

#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */

    84

    85

#define E1000_RXDEXT_STATERR_TST   0x00000100	/* Time Stamp taken */

    86

#define E1000_RXDEXT_STATERR_CE    0x01000000

    87

#define E1000_RXDEXT_STATERR_SE    0x02000000

    88

#define E1000_RXDEXT_STATERR_SEQ   0x04000000

    89

#define E1000_RXDEXT_STATERR_CXE   0x10000000

    90

#define E1000_RXDEXT_STATERR_RXE   0x80000000

    91

    92

/* mask to determine if packets should be dropped due to frame errors */

    93

#define E1000_RXD_ERR_FRAME_ERR_MASK ( \

    94

	E1000_RXD_ERR_CE  |		\

    95

	E1000_RXD_ERR_SE  |		\

    96

	E1000_RXD_ERR_SEQ |		\

    97

	E1000_RXD_ERR_CXE |		\

    98

	E1000_RXD_ERR_RXE)

    99

   100

/* Same mask, but for extended and packet split descriptors */

   101

#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \

   102

	E1000_RXDEXT_STATERR_CE  |	\

   103

	E1000_RXDEXT_STATERR_SE  |	\

   104

	E1000_RXDEXT_STATERR_SEQ |	\

   105

	E1000_RXDEXT_STATERR_CXE |	\

   106

	E1000_RXDEXT_STATERR_RXE)

   107

   108

#define E1000_MRQC_RSS_FIELD_MASK              0xFFFF0000

   109

#define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000

   110

#define E1000_MRQC_RSS_FIELD_IPV4              0x00020000

   111

#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX       0x00040000

   112

#define E1000_MRQC_RSS_FIELD_IPV6              0x00100000

   113

#define E1000_MRQC_RSS_FIELD_IPV6_TCP          0x00200000

   114

   115

#define E1000_RXDPS_HDRSTAT_HDRSP              0x00008000

   116

   117

/* Management Control */

   118

#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */

   119

#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */

   120

#define E1000_MANC_ARP_EN        0x00002000 /* Enable ARP Request Filtering */

   121

#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */

   122

#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */

   123

/* Enable MAC address filtering */

   124

#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000

   125

/* Enable MNG packets to host memory */

   126

#define E1000_MANC_EN_MNG2HOST   0x00200000

   127

   128

#define E1000_MANC2H_PORT_623    0x00000020 /* Port 0x26f */

   129

#define E1000_MANC2H_PORT_664    0x00000040 /* Port 0x298 */

   130

#define E1000_MDEF_PORT_623      0x00000800 /* Port 0x26f */

   131

#define E1000_MDEF_PORT_664      0x00000400 /* Port 0x298 */

   132

   133

/* Receive Control */

   134

#define E1000_RCTL_EN             0x00000002    /* enable */

   135

#define E1000_RCTL_SBP            0x00000004    /* store bad packet */

   136

#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */

   137

#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */

   138

#define E1000_RCTL_LPE            0x00000020    /* long packet enable */

   139

#define E1000_RCTL_LBM_NO         0x00000000    /* no loopback mode */

   140

#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */

   141

#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */

   142

#define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */

   143

#define E1000_RCTL_RDMTS_HALF     0x00000000    /* Rx desc min threshold size */

   144

#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */

   145

#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */

   146

#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */

   147

/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */

   148

#define E1000_RCTL_SZ_2048        0x00000000    /* Rx buffer size 2048 */

   149

#define E1000_RCTL_SZ_1024        0x00010000    /* Rx buffer size 1024 */

   150

#define E1000_RCTL_SZ_512         0x00020000    /* Rx buffer size 512 */

   151

#define E1000_RCTL_SZ_256         0x00030000    /* Rx buffer size 256 */

   152

/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */

   153

#define E1000_RCTL_SZ_16384       0x00010000    /* Rx buffer size 16384 */

   154

#define E1000_RCTL_SZ_8192        0x00020000    /* Rx buffer size 8192 */

   155

#define E1000_RCTL_SZ_4096        0x00030000    /* Rx buffer size 4096 */

   156

#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */

   157

#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */

   158

#define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */

   159

#define E1000_RCTL_DPF            0x00400000    /* Discard Pause Frames */

   160

#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */

   161

#define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */

   162

#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */

   163

   164

/* Use byte values for the following shift parameters

   165

 * Usage:

   166

 *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &

   167

 *                  E1000_PSRCTL_BSIZE0_MASK) |

   168

 *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &

   169

 *                  E1000_PSRCTL_BSIZE1_MASK) |

   170

 *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &

   171

 *                  E1000_PSRCTL_BSIZE2_MASK) |

   172

 *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;

   173

 *                  E1000_PSRCTL_BSIZE3_MASK))

   174

 * where value0 = [128..16256],  default=256

   175

 *       value1 = [1024..64512], default=4096

   176

 *       value2 = [0..64512],    default=4096

   177

 *       value3 = [0..64512],    default=0

   178

 */

   179

   180

#define E1000_PSRCTL_BSIZE0_MASK   0x0000007F

   181

#define E1000_PSRCTL_BSIZE1_MASK   0x00003F00

   182

#define E1000_PSRCTL_BSIZE2_MASK   0x003F0000

   183

#define E1000_PSRCTL_BSIZE3_MASK   0x3F000000

   184

   185

#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */

   186

#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */

   187

#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */

   188

#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */

   189

   190

/* SWFW_SYNC Definitions */

   191

#define E1000_SWFW_EEP_SM   0x1

   192

#define E1000_SWFW_PHY0_SM  0x2

   193

#define E1000_SWFW_PHY1_SM  0x4

   194

#define E1000_SWFW_CSR_SM   0x8

   195

   196

/* Device Control */

   197

#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */

   198

#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */

   199

#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */

   200

#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */

   201

#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */

   202

#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */

   203

#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */

   204

#define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */

   205

#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */

   206

#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */

   207

#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */

   208

#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */

   209

#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */

   210

#define E1000_CTRL_LANPHYPC_VALUE    0x00020000 /* SW value of LANPHYPC */

   211

#define E1000_CTRL_MEHE     0x00080000  /* Memory Error Handling Enable */

   212

#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */

   213

#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */

   214

#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */

   215

#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */

   216

#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */

   217

#define E1000_CTRL_RST      0x04000000  /* Global reset */

   218

#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */

   219

#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */

   220

#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */

   221

#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */

   222

   223

#define E1000_PCS_LCTL_FORCE_FCTRL	0x80

   224

   225

#define E1000_PCS_LSTS_AN_COMPLETE	0x10000

   226

   227

/* Device Status */

   228

#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */

   229

#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */

   230

#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */

   231

#define E1000_STATUS_FUNC_SHIFT 2

   232

#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */

   233

#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */

   234

#define E1000_STATUS_SPEED_MASK 0x000000C0

   235

#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */

   236

#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */

   237

#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */

   238

#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */

   239

#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */

   240

#define E1000_STATUS_GIO_MASTER_ENABLE	0x00080000	/* Master Req status */

   241

   242

#define HALF_DUPLEX 1

   243

#define FULL_DUPLEX 2

   244

   245

#define ADVERTISE_10_HALF                 0x0001

   246

#define ADVERTISE_10_FULL                 0x0002

   247

#define ADVERTISE_100_HALF                0x0004

   248

#define ADVERTISE_100_FULL                0x0008

   249

#define ADVERTISE_1000_HALF               0x0010 /* Not used, just FYI */

   250

#define ADVERTISE_1000_FULL               0x0020

   251

   252

/* 1000/H is not supported, nor spec-compliant. */

   253

#define E1000_ALL_SPEED_DUPLEX	( \

   254

	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \

   255

	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)

   256

#define E1000_ALL_NOT_GIG	( \

   257

	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \

   258

	ADVERTISE_100_FULL)

   259

#define E1000_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)

   260

#define E1000_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)

   261

#define E1000_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)

   262

   263

#define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX

   264

   265

/* LED Control */

   266

#define E1000_PHY_LED0_MODE_MASK          0x00000007

   267

#define E1000_PHY_LED0_IVRT               0x00000008

   268

#define E1000_PHY_LED0_MASK               0x0000001F

   269

   270

#define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F

   271

#define E1000_LEDCTL_LED0_MODE_SHIFT      0

   272

#define E1000_LEDCTL_LED0_IVRT            0x00000040

   273

#define E1000_LEDCTL_LED0_BLINK           0x00000080

   274

   275

#define E1000_LEDCTL_MODE_LINK_UP       0x2

   276

#define E1000_LEDCTL_MODE_LED_ON        0xE

   277

#define E1000_LEDCTL_MODE_LED_OFF       0xF

   278

   279

/* Transmit Descriptor bit definitions */

   280

#define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */

   281

#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */

   282

#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */

   283

#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */

   284

#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */

   285

#define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */

   286

#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */

   287

#define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */

   288

#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */

   289

#define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */

   290

#define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */

   291

#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */

   292

#define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */

   293

#define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */

   294

#define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */

   295

#define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */

   296

#define E1000_TXD_CMD_IP     0x02000000 /* IP packet */

   297

#define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */

   298

#define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */

   299

#define E1000_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */

   300

   301

/* Transmit Control */

   302

#define E1000_TCTL_EN     0x00000002    /* enable Tx */

   303

#define E1000_TCTL_PSP    0x00000008    /* pad short packets */

   304

#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */

   305

#define E1000_TCTL_COLD   0x003ff000    /* collision distance */

   306

#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */

   307

#define E1000_TCTL_MULR   0x10000000    /* Multiple request support */

   308

   309

/* SerDes Control */

   310

#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400

   311

#define E1000_SCTL_ENABLE_SERDES_LOOPBACK	0x0410

   312

   313

/* Receive Checksum Control */

   314

#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */

   315

#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */

   316

#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */

   317

   318

/* Header split receive */

   319

#define E1000_RFCTL_NFSW_DIS            0x00000040

   320

#define E1000_RFCTL_NFSR_DIS            0x00000080

   321

#define E1000_RFCTL_ACK_DIS             0x00001000

   322

#define E1000_RFCTL_EXTEN               0x00008000

   323

#define E1000_RFCTL_IPV6_EX_DIS         0x00010000

   324

#define E1000_RFCTL_NEW_IPV6_EXT_DIS    0x00020000

   325

   326

/* Collision related configuration parameters */

   327

#define E1000_COLLISION_THRESHOLD       15

   328

#define E1000_CT_SHIFT                  4

   329

#define E1000_COLLISION_DISTANCE        63

   330

#define E1000_COLD_SHIFT                12

   331

   332

/* Default values for the transmit IPG register */

   333

#define DEFAULT_82543_TIPG_IPGT_COPPER 8

   334

   335

#define E1000_TIPG_IPGT_MASK  0x000003FF

   336

   337

#define DEFAULT_82543_TIPG_IPGR1 8

   338

#define E1000_TIPG_IPGR1_SHIFT  10

   339

   340

#define DEFAULT_82543_TIPG_IPGR2 6

   341

#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7

   342

#define E1000_TIPG_IPGR2_SHIFT  20

   343

   344

#define MAX_JUMBO_FRAME_SIZE    0x3F00

   345

   346

/* Extended Configuration Control and Size */

   347

#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020

   348

#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001

   349

#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008

   350

#define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020

   351

#define E1000_EXTCNF_CTRL_GATE_PHY_CFG           0x00000080

   352

#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000

   353

#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16

   354

#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK   0x0FFF0000

   355

#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT          16

   356

   357

#define E1000_PHY_CTRL_D0A_LPLU           0x00000002

   358

#define E1000_PHY_CTRL_NOND0A_LPLU        0x00000004

   359

#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008

   360

#define E1000_PHY_CTRL_GBE_DISABLE        0x00000040

   361

   362

#define E1000_KABGTXD_BGSQLBIAS           0x00050000

   363

   364

/* Low Power IDLE Control */

   365

#define E1000_LPIC_LPIET_SHIFT		24	/* Low Power Idle Entry Time */

   366

   367

/* PBA constants */

   368

#define E1000_PBA_8K  0x0008    /* 8KB */

   369

#define E1000_PBA_16K 0x0010    /* 16KB */

   370

   371

#define E1000_PBA_RXA_MASK	0xFFFF

   372

   373

#define E1000_PBS_16K E1000_PBA_16K

   374

   375

/* Uncorrectable/correctable ECC Error counts and enable bits */

   376

#define E1000_PBECCSTS_CORR_ERR_CNT_MASK	0x000000FF

   377

#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK	0x0000FF00

   378

#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT	8

   379

#define E1000_PBECCSTS_ECC_ENABLE		0x00010000

   380

   381

#define IFS_MAX       80

   382

#define IFS_MIN       40

   383

#define IFS_RATIO     4

   384

#define IFS_STEP      10

   385

#define MIN_NUM_XMITS 1000

   386

   387

/* SW Semaphore Register */

   388

#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */

   389

#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */

   390

#define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */

   391

   392

#define E1000_SWSM2_LOCK        0x00000002 /* Secondary driver semaphore bit */

   393

   394

/* Interrupt Cause Read */

   395

#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */

   396

#define E1000_ICR_LSC           0x00000004 /* Link Status Change */

   397

#define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */

   398

#define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */

   399

#define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */

   400

#define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */

   401

/* If this bit asserted, the driver should claim the interrupt */

   402

#define E1000_ICR_INT_ASSERTED	0x80000000

   403

#define E1000_ICR_RXQ0          0x00100000 /* Rx Queue 0 Interrupt */

   404

#define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */

   405

#define E1000_ICR_TXQ0          0x00400000 /* Tx Queue 0 Interrupt */

   406

#define E1000_ICR_TXQ1          0x00800000 /* Tx Queue 1 Interrupt */

   407

#define E1000_ICR_OTHER         0x01000000 /* Other Interrupts */

   408

   409

/* PBA ECC Register */

   410

#define E1000_PBA_ECC_COUNTER_MASK  0xFFF00000 /* ECC counter mask */

   411

#define E1000_PBA_ECC_COUNTER_SHIFT 20         /* ECC counter shift value */

   412

#define E1000_PBA_ECC_CORR_EN       0x00000001 /* ECC correction enable */

   413

#define E1000_PBA_ECC_STAT_CLR      0x00000002 /* Clear ECC error counter */

   414

#define E1000_PBA_ECC_INT_EN        0x00000004 /* Enable ICR bit 5 for ECC */

   415

   416

/* This defines the bits that are set in the Interrupt Mask

   417

 * Set/Read Register.  Each bit is documented below:

   418

 *   o RXT0   = Receiver Timer Interrupt (ring 0)

   419

 *   o TXDW   = Transmit Descriptor Written Back

   420

 *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)

   421

 *   o RXSEQ  = Receive Sequence Error

   422

 *   o LSC    = Link Status Change

   423

 */

   424

#define IMS_ENABLE_MASK ( \

   425

	E1000_IMS_RXT0   |    \

   426

	E1000_IMS_TXDW   |    \

   427

	E1000_IMS_RXDMT0 |    \

   428

	E1000_IMS_RXSEQ  |    \

   429

	E1000_IMS_LSC)

   430

   431

/* Interrupt Mask Set */

   432

#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */

   433

#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */

   434

#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */

   435

#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */

   436

#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */

   437

#define E1000_IMS_ECCER     E1000_ICR_ECCER     /* Uncorrectable ECC Error */

   438

#define E1000_IMS_RXQ0      E1000_ICR_RXQ0      /* Rx Queue 0 Interrupt */

   439

#define E1000_IMS_RXQ1      E1000_ICR_RXQ1      /* Rx Queue 1 Interrupt */

   440

#define E1000_IMS_TXQ0      E1000_ICR_TXQ0      /* Tx Queue 0 Interrupt */

   441

#define E1000_IMS_TXQ1      E1000_ICR_TXQ1      /* Tx Queue 1 Interrupt */

   442

#define E1000_IMS_OTHER     E1000_ICR_OTHER     /* Other Interrupts */

   443

   444

/* Interrupt Cause Set */

   445

#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */

   446

#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */

   447

#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */

   448

   449

/* Transmit Descriptor Control */

   450

#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */

   451

#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */

   452

#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */

   453

#define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */

   454

#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */

   455

#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */

   456

/* Enable the counting of desc. still to be processed. */

   457

#define E1000_TXDCTL_COUNT_DESC 0x00400000

   458

   459

/* Flow Control Constants */

   460

#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001

   461

#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100

   462

#define FLOW_CONTROL_TYPE         0x8808

   463

   464

/* 802.1q VLAN Packet Size */

   465

#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */

   466

   467

/* Receive Address

   468

 * Number of high/low register pairs in the RAR. The RAR (Receive Address

   469

 * Registers) holds the directed and multicast addresses that we monitor.

   470

 * Technically, we have 16 spots.  However, we reserve one of these spots

   471

 * (RAR[15]) for our directed address used by controllers with

   472

 * manageability enabled, allowing us room for 15 multicast addresses.

   473

 */

   474

#define E1000_RAR_ENTRIES     15

   475

#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */

   476

#define E1000_RAL_MAC_ADDR_LEN 4

   477

#define E1000_RAH_MAC_ADDR_LEN 2

   478

   479

/* Error Codes */

   480

#define E1000_ERR_NVM      1

   481

#define E1000_ERR_PHY      2

   482

#define E1000_ERR_CONFIG   3

   483

#define E1000_ERR_PARAM    4

   484

#define E1000_ERR_MAC_INIT 5

   485

#define E1000_ERR_PHY_TYPE 6

   486

#define E1000_ERR_RESET   9

   487

#define E1000_ERR_MASTER_REQUESTS_PENDING 10

   488

#define E1000_ERR_HOST_INTERFACE_COMMAND 11

   489

#define E1000_BLK_PHY_RESET   12

   490

#define E1000_ERR_SWFW_SYNC 13

   491

#define E1000_NOT_IMPLEMENTED 14

   492

#define E1000_ERR_INVALID_ARGUMENT  16

   493

#define E1000_ERR_NO_SPACE          17

   494

#define E1000_ERR_NVM_PBA_SECTION   18

   495

   496

/* Loop limit on how long we wait for auto-negotiation to complete */

   497

#define FIBER_LINK_UP_LIMIT               50

   498

#define COPPER_LINK_UP_LIMIT              10

   499

#define PHY_AUTO_NEG_LIMIT                45

   500

#define PHY_FORCE_LIMIT                   20

   501

/* Number of 100 microseconds we wait for PCI Express master disable */

   502

#define MASTER_DISABLE_TIMEOUT      800

   503

/* Number of milliseconds we wait for PHY configuration done after MAC reset */

   504

#define PHY_CFG_TIMEOUT             100

   505

/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */

   506

#define MDIO_OWNERSHIP_TIMEOUT      10

   507

/* Number of milliseconds for NVM auto read done after MAC reset. */

   508

#define AUTO_READ_DONE_TIMEOUT      10

   509

   510

/* Flow Control */

   511

#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */

   512

#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */

   513

#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */

   514

   515

/* Transmit Configuration Word */

   516

#define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */

   517

#define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */

   518

#define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */

   519

#define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */

   520

#define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */

   521

   522

/* Receive Configuration Word */

   523

#define E1000_RXCW_CW         0x0000ffff        /* RxConfigWord mask */

   524

#define E1000_RXCW_IV         0x08000000        /* Receive config invalid */

   525

#define E1000_RXCW_C          0x20000000        /* Receive config */

   526

#define E1000_RXCW_SYNCH      0x40000000        /* Receive config synch */

   527

   528

#define E1000_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */

   529

#define E1000_TSYNCTXCTL_ENABLED	0x00000010 /* enable Tx timestamping */

   530