1

/*******************************************************************************

     2

     3

  Intel PRO/1000 Linux driver

     4

  Copyright(c) 1999 - 2011 Intel Corporation.

     5

     6

  This program is free software; you can redistribute it and/or modify it

     7

  under the terms and conditions of the GNU General Public License,

     8

  version 2, as published by the Free Software Foundation.

     9

    10

  This program is distributed in the hope it will be useful, but WITHOUT

    11

  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    12

  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    13

  more details.

    14

    15

  You should have received a copy of the GNU General Public License along with

    16

  this program; if not, write to the Free Software Foundation, Inc.,

    17

  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

    18

    19

  The full GNU General Public License is included in this distribution in

    20

  the file called "COPYING".

    21

    22

  Contact Information:

    23

  Linux NICS <linux.nics@intel.com>

    24

  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    25

  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    26

    27

*******************************************************************************/

    28

    29

/*

    30

 * 82571EB Gigabit Ethernet Controller

    31

 * 82571EB Gigabit Ethernet Controller (Copper)

    32

 * 82571EB Gigabit Ethernet Controller (Fiber)

    33

 * 82571EB Dual Port Gigabit Mezzanine Adapter

    34

 * 82571EB Quad Port Gigabit Mezzanine Adapter

    35

 * 82571PT Gigabit PT Quad Port Server ExpressModule

    36

 * 82572EI Gigabit Ethernet Controller (Copper)

    37

 * 82572EI Gigabit Ethernet Controller (Fiber)

    38

 * 82572EI Gigabit Ethernet Controller

    39

 * 82573V Gigabit Ethernet Controller (Copper)

    40

 * 82573E Gigabit Ethernet Controller (Copper)

    41

 * 82573L Gigabit Ethernet Controller

    42

 * 82574L Gigabit Network Connection

    43

 * 82583V Gigabit Network Connection

    44

 */

    45

    46

#include "e1000-3.2-ethercat.h"

    47

    48

#define ID_LED_RESERVED_F746 0xF746

    49

#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \

    50

			      (ID_LED_OFF1_ON2  <<  8) | \

    51

			      (ID_LED_DEF1_DEF2 <<  4) | \

    52

			      (ID_LED_DEF1_DEF2))

    53

    54

#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000

    55

#define AN_RETRY_COUNT          5 /* Autoneg Retry Count value */

    56

#define E1000_BASE1000T_STATUS          10

    57

#define E1000_IDLE_ERROR_COUNT_MASK     0xFF

    58

#define E1000_RECEIVE_ERROR_COUNTER     21

    59

#define E1000_RECEIVE_ERROR_MAX         0xFFFF

    60

    61

#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */

    62

    63

static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);

    64

static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);

    65

static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);

    66

static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);

    67

static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,

    68

				      u16 words, u16 *data);

    69

static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);

    70

static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);

    71

static s32 e1000_setup_link_82571(struct e1000_hw *hw);

    72

static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);

    73

static void e1000_clear_vfta_82571(struct e1000_hw *hw);

    74

static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);

    75

static s32 e1000_led_on_82574(struct e1000_hw *hw);

    76

static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);

    77

static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);

    78

static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);

    79

static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);

    80

static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);

    81

static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);

    82

static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);

    83

    84

/**

    85

 *  e1000_init_phy_params_82571 - Init PHY func ptrs.

    86

 *  @hw: pointer to the HW structure

    87

 **/

    88

static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)

    89

{

    90

	struct e1000_phy_info *phy = &hw->phy;

    91

	s32 ret_val __attribute__ ((unused));

    92

    93

	if (hw->phy.media_type != e1000_media_type_copper) {

    94

		phy->type = e1000_phy_none;

    95

		return 0;

    96

	}

    97

    98

	phy->addr			 = 1;

    99

	phy->autoneg_mask		 = AUTONEG_ADVERTISE_SPEED_DEFAULT;

   100

	phy->reset_delay_us		 = 100;

   101

   102

	phy->ops.power_up		 = e1000_power_up_phy_copper;

   103

	phy->ops.power_down		 = e1000_power_down_phy_copper_82571;

   104

   105

	switch (hw->mac.type) {

   106

	case e1000_82571:

   107

	case e1000_82572:

   108

		phy->type		 = e1000_phy_igp_2;

   109

		break;

   110

	case e1000_82573:

   111

		phy->type		 = e1000_phy_m88;

   112

		break;

   113

	case e1000_82574:

   114

	case e1000_82583:

   115

		phy->type		 = e1000_phy_bm;

   116

		phy->ops.acquire = e1000_get_hw_semaphore_82574;

   117

		phy->ops.release = e1000_put_hw_semaphore_82574;

   118

		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;

   119

		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;

   120

		break;

   121

	default:

   122

		return -E1000_ERR_PHY;

   123

		break;

   124

	}

   125

   126

	/* This can only be done after all function pointers are setup. */

   127

	ret_val = e1000_get_phy_id_82571(hw);

   128

	if (ret_val) {

   129

		e_dbg("Error getting PHY ID\n");

   130

		return ret_val;

   131

	}

   132

   133

	/* Verify phy id */

   134

	switch (hw->mac.type) {

   135

	case e1000_82571:

   136

	case e1000_82572:

   137

		if (phy->id != IGP01E1000_I_PHY_ID)

   138

			ret_val = -E1000_ERR_PHY;

   139

		break;

   140

	case e1000_82573:

   141

		if (phy->id != M88E1111_I_PHY_ID)

   142

			ret_val = -E1000_ERR_PHY;

   143

		break;

   144

	case e1000_82574:

   145

	case e1000_82583:

   146

		if (phy->id != BME1000_E_PHY_ID_R2)

   147

			ret_val = -E1000_ERR_PHY;

   148

		break;

   149

	default:

   150

		ret_val = -E1000_ERR_PHY;

   151

		break;

   152

	}

   153

   154

	if (ret_val)

   155

		e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);

   156

   157

	return ret_val;

   158

}

   159

   160

/**

   161

 *  e1000_init_nvm_params_82571 - Init NVM func ptrs.

   162

 *  @hw: pointer to the HW structure

   163

 **/

   164

static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)

   165

{

   166

	struct e1000_nvm_info *nvm = &hw->nvm;

   167

	u32 eecd = er32(EECD);

   168

	u16 size;

   169

   170

	nvm->opcode_bits = 8;

   171

	nvm->delay_usec = 1;

   172

	switch (nvm->override) {

   173

	case e1000_nvm_override_spi_large:

   174

		nvm->page_size = 32;

   175

		nvm->address_bits = 16;

   176

		break;

   177

	case e1000_nvm_override_spi_small:

   178

		nvm->page_size = 8;

   179

		nvm->address_bits = 8;

   180

		break;

   181

	default:

   182

		nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;

   183

		nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;

   184

		break;

   185

	}

   186

   187

	switch (hw->mac.type) {

   188

	case e1000_82573:

   189

	case e1000_82574:

   190

	case e1000_82583:

   191

		if (((eecd >> 15) & 0x3) == 0x3) {

   192

			nvm->type = e1000_nvm_flash_hw;

   193

			nvm->word_size = 2048;

   194

			/*

   195

			 * Autonomous Flash update bit must be cleared due

   196

			 * to Flash update issue.

   197

			 */

   198

			eecd &= ~E1000_EECD_AUPDEN;

   199

			ew32(EECD, eecd);

   200

			break;

   201

		}

   202

		/* Fall Through */

   203

	default:

   204

		nvm->type = e1000_nvm_eeprom_spi;

   205

		size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>

   206

				  E1000_EECD_SIZE_EX_SHIFT);

   207

		/*

   208

		 * Added to a constant, "size" becomes the left-shift value

   209

		 * for setting word_size.

   210

		 */

   211

		size += NVM_WORD_SIZE_BASE_SHIFT;

   212

   213

		/* EEPROM access above 16k is unsupported */

   214

		if (size > 14)

   215

			size = 14;

   216

		nvm->word_size	= 1 << size;

   217

		break;

   218

	}

   219

   220

	/* Function Pointers */

   221

	switch (hw->mac.type) {

   222

	case e1000_82574:

   223

	case e1000_82583:

   224

		nvm->ops.acquire = e1000_get_hw_semaphore_82574;

   225

		nvm->ops.release = e1000_put_hw_semaphore_82574;

   226

		break;

   227

	default:

   228

		break;

   229

	}

   230

   231

	return 0;

   232

}

   233

   234

/**

   235

 *  e1000_init_mac_params_82571 - Init MAC func ptrs.

   236

 *  @hw: pointer to the HW structure

   237

 **/

   238

static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)

   239

{

   240

	struct e1000_hw *hw = &adapter->hw;

   241

	struct e1000_mac_info *mac = &hw->mac;

   242

	struct e1000_mac_operations *func = &mac->ops;

   243

	u32 swsm = 0;

   244

	u32 swsm2 = 0;

   245

	bool force_clear_smbi = false;

   246

   247

	/* Set media type */

   248

	switch (adapter->pdev->device) {

   249

	case E1000_DEV_ID_82571EB_FIBER:

   250

	case E1000_DEV_ID_82572EI_FIBER:

   251

	case E1000_DEV_ID_82571EB_QUAD_FIBER:

   252

		hw->phy.media_type = e1000_media_type_fiber;

   253

		break;

   254

	case E1000_DEV_ID_82571EB_SERDES:

   255

	case E1000_DEV_ID_82572EI_SERDES:

   256

	case E1000_DEV_ID_82571EB_SERDES_DUAL:

   257

	case E1000_DEV_ID_82571EB_SERDES_QUAD:

   258

		hw->phy.media_type = e1000_media_type_internal_serdes;

   259

		break;

   260

	default:

   261

		hw->phy.media_type = e1000_media_type_copper;

   262

		break;

   263

	}

   264

   265

	/* Set mta register count */

   266

	mac->mta_reg_count = 128;

   267

	/* Set rar entry count */

   268

	mac->rar_entry_count = E1000_RAR_ENTRIES;

   269

	/* Adaptive IFS supported */

   270

	mac->adaptive_ifs = true;

   271

   272

	/* check for link */

   273

	switch (hw->phy.media_type) {

   274

	case e1000_media_type_copper:

   275

		func->setup_physical_interface = e1000_setup_copper_link_82571;

   276

		func->check_for_link = e1000e_check_for_copper_link;

   277

		func->get_link_up_info = e1000e_get_speed_and_duplex_copper;

   278

		break;

   279

	case e1000_media_type_fiber:

   280

		func->setup_physical_interface =

   281

			e1000_setup_fiber_serdes_link_82571;

   282

		func->check_for_link = e1000e_check_for_fiber_link;

   283

		func->get_link_up_info =

   284

			e1000e_get_speed_and_duplex_fiber_serdes;

   285

		break;

   286

	case e1000_media_type_internal_serdes:

   287

		func->setup_physical_interface =

   288

			e1000_setup_fiber_serdes_link_82571;

   289

		func->check_for_link = e1000_check_for_serdes_link_82571;

   290

		func->get_link_up_info =

   291

			e1000e_get_speed_and_duplex_fiber_serdes;

   292

		break;

   293

	default:

   294

		return -E1000_ERR_CONFIG;

   295

		break;

   296

	}

   297

   298

	switch (hw->mac.type) {

   299

	case e1000_82573:

   300

		func->set_lan_id = e1000_set_lan_id_single_port;

   301

		func->check_mng_mode = e1000e_check_mng_mode_generic;

   302

		func->led_on = e1000e_led_on_generic;

   303

		func->blink_led = e1000e_blink_led_generic;

   304

   305

		/* FWSM register */

   306

		mac->has_fwsm = true;

   307

		/*

   308

		 * ARC supported; valid only if manageability features are

   309

		 * enabled.

   310

		 */

   311

		mac->arc_subsystem_valid =

   312

			(er32(FWSM) & E1000_FWSM_MODE_MASK)

   313

			? true : false;

   314

		break;

   315

	case e1000_82574:

   316

	case e1000_82583:

   317

		func->set_lan_id = e1000_set_lan_id_single_port;

   318

		func->check_mng_mode = e1000_check_mng_mode_82574;

   319

		func->led_on = e1000_led_on_82574;

   320

		break;

   321

	default:

   322

		func->check_mng_mode = e1000e_check_mng_mode_generic;

   323

		func->led_on = e1000e_led_on_generic;

   324

		func->blink_led = e1000e_blink_led_generic;

   325

   326

		/* FWSM register */

   327

		mac->has_fwsm = true;

   328

		break;

   329

	}

   330

   331

	/*

   332

	 * Ensure that the inter-port SWSM.SMBI lock bit is clear before

   333

	 * first NVM or PHY access. This should be done for single-port

   334

	 * devices, and for one port only on dual-port devices so that

   335

	 * for those devices we can still use the SMBI lock to synchronize

   336

	 * inter-port accesses to the PHY & NVM.

   337

	 */

   338

	switch (hw->mac.type) {

   339

	case e1000_82571:

   340

	case e1000_82572:

   341

		swsm2 = er32(SWSM2);

   342

   343

		if (!(swsm2 & E1000_SWSM2_LOCK)) {

   344

			/* Only do this for the first interface on this card */

   345

			ew32(SWSM2,

   346

			    swsm2 | E1000_SWSM2_LOCK);

   347

			force_clear_smbi = true;

   348

		} else

   349

			force_clear_smbi = false;

   350

		break;

   351

	default:

   352

		force_clear_smbi = true;

   353

		break;

   354

	}

   355

   356

	if (force_clear_smbi) {

   357

		/* Make sure SWSM.SMBI is clear */

   358

		swsm = er32(SWSM);

   359

		if (swsm & E1000_SWSM_SMBI) {

   360

			/* This bit should not be set on a first interface, and

   361

			 * indicates that the bootagent or EFI code has

   362

			 * improperly left this bit enabled

   363

			 */

   364

			e_dbg("Please update your 82571 Bootagent\n");

   365

		}

   366

		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);

   367

	}

   368

   369

	/*

   370

	 * Initialize device specific counter of SMBI acquisition

   371

	 * timeouts.

   372

	 */

   373

	 hw->dev_spec.e82571.smb_counter = 0;

   374

   375

	return 0;

   376

}

   377

   378

static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)

   379

{

   380

	struct e1000_hw *hw = &adapter->hw;

   381

	static int global_quad_port_a; /* global port a indication */

   382

	struct pci_dev *pdev = adapter->pdev;

   383

	int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;

   384

	s32 rc;

   385

   386

	rc = e1000_init_mac_params_82571(adapter);

   387

	if (rc)

   388

		return rc;

   389

   390

	rc = e1000_init_nvm_params_82571(hw);

   391

	if (rc)

   392

		return rc;

   393

   394

	rc = e1000_init_phy_params_82571(hw);

   395

	if (rc)

   396

		return rc;

   397

   398

	/* tag quad port adapters first, it's used below */

   399

	switch (pdev->device) {

   400

	case E1000_DEV_ID_82571EB_QUAD_COPPER:

   401

	case E1000_DEV_ID_82571EB_QUAD_FIBER:

   402

	case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:

   403

	case E1000_DEV_ID_82571PT_QUAD_COPPER:

   404

		adapter->flags |= FLAG_IS_QUAD_PORT;

   405

		/* mark the first port */

   406

		if (global_quad_port_a == 0)

   407

			adapter->flags |= FLAG_IS_QUAD_PORT_A;

   408

		/* Reset for multiple quad port adapters */

   409

		global_quad_port_a++;

   410

		if (global_quad_port_a == 4)

   411

			global_quad_port_a = 0;

   412

		break;

   413

	default:

   414

		break;

   415

	}

   416

   417

	switch (adapter->hw.mac.type) {

   418

	case e1000_82571:

   419

		/* these dual ports don't have WoL on port B at all */

   420

		if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||

   421

		     (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||

   422

		     (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&

   423

		    (is_port_b))

   424

			adapter->flags &= ~FLAG_HAS_WOL;

   425

		/* quad ports only support WoL on port A */

   426

		if (adapter->flags & FLAG_IS_QUAD_PORT &&

   427

		    (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))

   428

			adapter->flags &= ~FLAG_HAS_WOL;

   429

		/* Does not support WoL on any port */

   430

		if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)

   431

			adapter->flags &= ~FLAG_HAS_WOL;

   432

		break;

   433

	case e1000_82573:

   434

		if (pdev->device == E1000_DEV_ID_82573L) {

   435

			adapter->flags |= FLAG_HAS_JUMBO_FRAMES;

   436

			adapter->max_hw_frame_size = DEFAULT_JUMBO;

   437

		}

   438

		break;

   439

	default:

   440

		break;

   441

	}

   442

   443

	return 0;

   444

}

   445

   446

/**

   447

 *  e1000_get_phy_id_82571 - Retrieve the PHY ID and revision

   448

 *  @hw: pointer to the HW structure

   449

 *

   450

 *  Reads the PHY registers and stores the PHY ID and possibly the PHY

   451

 *  revision in the hardware structure.

   452

 **/

   453

static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)

   454

{

   455

	struct e1000_phy_info *phy = &hw->phy;

   456

	s32 ret_val;

   457

	u16 phy_id = 0;

   458

   459

	switch (hw->mac.type) {

   460

	case e1000_82571:

   461

	case e1000_82572:

   462

		/*

   463

		 * The 82571 firmware may still be configuring the PHY.

   464

		 * In this case, we cannot access the PHY until the

   465

		 * configuration is done.  So we explicitly set the

   466

		 * PHY ID.

   467

		 */

   468

		phy->id = IGP01E1000_I_PHY_ID;

   469

		break;

   470

	case e1000_82573:

   471

		return e1000e_get_phy_id(hw);

   472

		break;

   473

	case e1000_82574:

   474

	case e1000_82583:

   475

		ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);

   476

		if (ret_val)

   477

			return ret_val;

   478

   479

		phy->id = (u32)(phy_id << 16);

   480

		udelay(20);

   481

		ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);

   482

		if (ret_val)

   483

			return ret_val;

   484

   485

		phy->id |= (u32)(phy_id);

   486

		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);

   487

		break;

   488

	default:

   489

		return -E1000_ERR_PHY;

   490

		break;

   491

	}

   492

   493

	return 0;

   494

}

   495

   496

/**

   497

 *  e1000_get_hw_semaphore_82571 - Acquire hardware semaphore

   498

 *  @hw: pointer to the HW structure

   499

 *

   500

 *  Acquire the HW semaphore to access the PHY or NVM

   501

 **/

   502

static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)

   503

{

   504

	u32 swsm;

   505

	s32 sw_timeout = hw->nvm.word_size + 1;

   506

	s32 fw_timeout = hw->nvm.word_size + 1;

   507

	s32 i = 0;

   508

   509

	/*

   510

	 * If we have timedout 3 times on trying to acquire

   511

	 * the inter-port SMBI semaphore, there is old code

   512

	 * operating on the other port, and it is not

   513

	 * releasing SMBI. Modify the number of times that

   514

	 * we try for the semaphore to interwork with this

   515

	 * older code.

   516

	 */

   517

	if (hw->dev_spec.e82571.smb_counter > 2)

   518

		sw_timeout = 1;

   519

   520

	/* Get the SW semaphore */

   521

	while (i < sw_timeout) {

   522

		swsm = er32(SWSM);

   523

		if (!(swsm & E1000_SWSM_SMBI))

   524

			break;

   525

   526

		udelay(50);

   527

		i++;

   528

	}

   529

   530

	if (i == sw_timeout) {