1

/*******************************************************************************

     2

     3

  Intel PRO/1000 Linux driver

     4

  Copyright(c) 1999 - 2013 Intel Corporation.

     5

     6

  This program is free software; you can redistribute it and/or modify it

     7

  under the terms and conditions of the GNU General Public License,

     8

  version 2, as published by the Free Software Foundation.

     9

    10

  This program is distributed in the hope it will be useful, but WITHOUT

    11

  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

    12

  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

    13

  more details.

    14

    15

  You should have received a copy of the GNU General Public License along with

    16

  this program; if not, write to the Free Software Foundation, Inc.,

    17

  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

    18

    19

  The full GNU General Public License is included in this distribution in

    20

  the file called "COPYING".

    21

    22

  Contact Information:

    23

  Linux NICS <linux.nics@intel.com>

    24

  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>

    25

  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

    26

    27

*******************************************************************************/

    28

    29

#ifndef _E1000E_ICH8LAN_H_

    30

#define _E1000E_ICH8LAN_H_

    31

    32

#define ICH_FLASH_GFPREG		0x0000

    33

#define ICH_FLASH_HSFSTS		0x0004

    34

#define ICH_FLASH_HSFCTL		0x0006

    35

#define ICH_FLASH_FADDR			0x0008

    36

#define ICH_FLASH_FDATA0		0x0010

    37

#define ICH_FLASH_PR0			0x0074

    38

    39

/* Requires up to 10 seconds when MNG might be accessing part. */

    40

#define ICH_FLASH_READ_COMMAND_TIMEOUT	10000000

    41

#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	10000000

    42

#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	10000000

    43

#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF

    44

#define ICH_FLASH_CYCLE_REPEAT_COUNT	10

    45

    46

#define ICH_CYCLE_READ			0

    47

#define ICH_CYCLE_WRITE			2

    48

#define ICH_CYCLE_ERASE			3

    49

    50

#define FLASH_GFPREG_BASE_MASK		0x1FFF

    51

#define FLASH_SECTOR_ADDR_SHIFT		12

    52

    53

#define ICH_FLASH_SEG_SIZE_256		256

    54

#define ICH_FLASH_SEG_SIZE_4K		4096

    55

#define ICH_FLASH_SEG_SIZE_8K		8192

    56

#define ICH_FLASH_SEG_SIZE_64K		65536

    57

    58

#define E1000_ICH_FWSM_RSPCIPHY	0x00000040	/* Reset PHY on PCI Reset */

    59

/* FW established a valid mode */

    60

#define E1000_ICH_FWSM_FW_VALID	0x00008000

    61

#define E1000_ICH_FWSM_PCIM2PCI	0x01000000	/* ME PCIm-to-PCI active */

    62

#define E1000_ICH_FWSM_PCIM2PCI_COUNT	2000

    63

    64

#define E1000_ICH_MNG_IAMT_MODE		0x2

    65

    66

#define E1000_FWSM_WLOCK_MAC_MASK	0x0380

    67

#define E1000_FWSM_WLOCK_MAC_SHIFT	7

    68

    69

/* Shared Receive Address Registers */

    70

#define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))

    71

#define E1000_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))

    72

    73

#define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \

    74

				 (ID_LED_OFF1_OFF2 <<  8) | \

    75

				 (ID_LED_OFF1_ON2  <<  4) | \

    76

				 (ID_LED_DEF1_DEF2))

    77

    78

#define E1000_ICH_NVM_SIG_WORD		0x13

    79

#define E1000_ICH_NVM_SIG_MASK		0xC000

    80

#define E1000_ICH_NVM_VALID_SIG_MASK	0xC0

    81

#define E1000_ICH_NVM_SIG_VALUE		0x80

    82

    83

#define E1000_ICH8_LAN_INIT_TIMEOUT	1500

    84

    85

#define E1000_FEXTNVM_SW_CONFIG		1

    86

#define E1000_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27)	/* different on ICH8M */

    87

    88

#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK	0x0C000000

    89

#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC	0x08000000

    90

    91

#define E1000_FEXTNVM4_BEACON_DURATION_MASK	0x7

    92

#define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7

    93

#define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3

    94

    95

#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100

    96

#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200

    97

    98

#define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL

    99

   100

#define E1000_ICH_RAR_ENTRIES	7

   101

#define E1000_PCH2_RAR_ENTRIES	5	/* RAR[0], SHRA[0-3] */

   102

#define E1000_PCH_LPT_RAR_ENTRIES	12	/* RAR[0], SHRA[0-10] */

   103

   104

#define PHY_PAGE_SHIFT		5

   105

#define PHY_REG(page, reg)	(((page) << PHY_PAGE_SHIFT) | \

   106

				 ((reg) & MAX_PHY_REG_ADDRESS))

   107

#define IGP3_KMRN_DIAG	PHY_REG(770, 19)	/* KMRN Diagnostic */

   108

#define IGP3_VR_CTRL	PHY_REG(776, 18)	/* Voltage Regulator Control */

   109

   110

#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS		0x0002

   111

#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK	0x0300

   112

#define IGP3_VR_CTRL_MODE_SHUTDOWN		0x0200

   113

   114

/* PHY Wakeup Registers and defines */

   115

#define BM_PORT_GEN_CFG		PHY_REG(BM_PORT_CTRL_PAGE, 17)

   116

#define BM_RCTL			PHY_REG(BM_WUC_PAGE, 0)

   117

#define BM_WUC			PHY_REG(BM_WUC_PAGE, 1)

   118

#define BM_WUFC			PHY_REG(BM_WUC_PAGE, 2)

   119

#define BM_WUS			PHY_REG(BM_WUC_PAGE, 3)

   120

#define BM_RAR_L(_i)		(BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))

   121

#define BM_RAR_M(_i)		(BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))

   122

#define BM_RAR_H(_i)		(BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))

   123

#define BM_RAR_CTRL(_i)		(BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))

   124

#define BM_MTA(_i)		(BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))

   125

   126

#define BM_RCTL_UPE		0x0001	/* Unicast Promiscuous Mode */

   127

#define BM_RCTL_MPE		0x0002	/* Multicast Promiscuous Mode */

   128

#define BM_RCTL_MO_SHIFT	3	/* Multicast Offset Shift */

   129

#define BM_RCTL_MO_MASK		(3 << 3)	/* Multicast Offset Mask */

   130

#define BM_RCTL_BAM		0x0020	/* Broadcast Accept Mode */

   131

#define BM_RCTL_PMCF		0x0040	/* Pass MAC Control Frames */

   132

#define BM_RCTL_RFCE		0x0080	/* Rx Flow Control Enable */

   133

   134

#define HV_LED_CONFIG		PHY_REG(768, 30)	/* LED Configuration */

   135

#define HV_MUX_DATA_CTRL	PHY_REG(776, 16)

   136

#define HV_MUX_DATA_CTRL_GEN_TO_MAC	0x0400

   137

#define HV_MUX_DATA_CTRL_FORCE_SPEED	0x0004

   138

#define HV_STATS_PAGE	778

   139

/* Half-duplex collision counts */

   140

#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16)	/* Single Collision */

   141

#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)

   142

#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18)	/* Excessive Coll. */

   143

#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)

   144

#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20)	/* Multiple Collision */

   145

#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)

   146

#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23)	/* Late Collision */

   147

#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)

   148

#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25)	/* Collision */

   149

#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)

   150

#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27)	/* Defer Count */

   151

#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)

   152

#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29)	/* Tx with no CRS */

   153

#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)

   154

   155

#define E1000_FCRTV_PCH	0x05F40	/* PCH Flow Control Refresh Timer Value */

   156

   157

#define E1000_NVM_K1_CONFIG	0x1B	/* NVM K1 Config Word */

   158

#define E1000_NVM_K1_ENABLE	0x1	/* NVM Enable K1 bit */

   159

   160

/* SMBus Control Phy Register */

   161

#define CV_SMB_CTRL		PHY_REG(769, 23)

   162

#define CV_SMB_CTRL_FORCE_SMBUS	0x0001

   163

   164

/* SMBus Address Phy Register */

   165

#define HV_SMB_ADDR		PHY_REG(768, 26)

   166

#define HV_SMB_ADDR_MASK	0x007F

   167

#define HV_SMB_ADDR_PEC_EN	0x0200

   168

#define HV_SMB_ADDR_VALID	0x0080

   169

#define HV_SMB_ADDR_FREQ_MASK		0x1100

   170

#define HV_SMB_ADDR_FREQ_LOW_SHIFT	8

   171

#define HV_SMB_ADDR_FREQ_HIGH_SHIFT	12

   172

   173

/* Strapping Option Register - RO */

   174

#define E1000_STRAP			0x0000C

   175

#define E1000_STRAP_SMBUS_ADDRESS_MASK	0x00FE0000

   176

#define E1000_STRAP_SMBUS_ADDRESS_SHIFT	17

   177

#define E1000_STRAP_SMT_FREQ_MASK	0x00003000

   178

#define E1000_STRAP_SMT_FREQ_SHIFT	12

   179

   180

/* OEM Bits Phy Register */

   181

#define HV_OEM_BITS		PHY_REG(768, 25)

   182

#define HV_OEM_BITS_LPLU	0x0004	/* Low Power Link Up */

   183

#define HV_OEM_BITS_GBE_DIS	0x0040	/* Gigabit Disable */

   184

#define HV_OEM_BITS_RESTART_AN	0x0400	/* Restart Auto-negotiation */

   185

   186

/* KMRN Mode Control */

   187

#define HV_KMRN_MODE_CTRL	PHY_REG(769, 16)

   188

#define HV_KMRN_MDIO_SLOW	0x0400

   189

   190

/* KMRN FIFO Control and Status */

   191

#define HV_KMRN_FIFO_CTRLSTA			PHY_REG(770, 16)

   192

#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK	0x7000

   193

#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT	12

   194

   195

/* PHY Power Management Control */

   196

#define HV_PM_CTRL		PHY_REG(770, 17)

   197

#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100

   198

   199

#define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */

   200

   201

/* Inband Control */

   202

#define I217_INBAND_CTRL				PHY_REG(770, 18)

   203

#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00

   204

#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8

   205

   206

/* PHY Low Power Idle Control */

   207

#define I82579_LPI_CTRL				PHY_REG(772, 20)

   208

#define I82579_LPI_CTRL_100_ENABLE		0x2000

   209

#define I82579_LPI_CTRL_1000_ENABLE		0x4000

   210

#define I82579_LPI_CTRL_ENABLE_MASK		0x6000

   211

#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80

   212

   213

/* Extended Management Interface (EMI) Registers */

   214

#define I82579_EMI_ADDR		0x10

   215

#define I82579_EMI_DATA		0x11

   216

#define I82579_LPI_UPDATE_TIMER	0x4805	/* in 40ns units + 40 ns base value */

   217

#define I82579_MSE_THRESHOLD	0x084F	/* 82579 Mean Square Error Threshold */

   218

#define I82577_MSE_THRESHOLD	0x0887	/* 82577 Mean Square Error Threshold */

   219

#define I82579_MSE_LINK_DOWN	0x2411	/* MSE count before dropping link */

   220

#define I82579_RX_CONFIG		0x3412	/* Receive configuration */

   221

#define I82579_EEE_PCS_STATUS		0x182E	/* IEEE MMD Register 3.1 >> 8 */

   222

#define I82579_EEE_CAPABILITY		0x0410	/* IEEE MMD Register 3.20 */

   223

#define I82579_EEE_ADVERTISEMENT	0x040E	/* IEEE MMD Register 7.60 */

   224

#define I82579_EEE_LP_ABILITY		0x040F	/* IEEE MMD Register 7.61 */

   225

#define I82579_EEE_100_SUPPORTED	(1 << 1)	/* 100BaseTx EEE */

   226

#define I82579_EEE_1000_SUPPORTED	(1 << 2)	/* 1000BaseTx EEE */

   227

#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */

   228

#define I217_EEE_CAPABILITY	0x8000	/* IEEE MMD Register 3.20 */

   229

#define I217_EEE_ADVERTISEMENT	0x8001	/* IEEE MMD Register 7.60 */

   230

#define I217_EEE_LP_ABILITY	0x8002	/* IEEE MMD Register 7.61 */

   231

   232

#define E1000_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */

   233

#define E1000_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */

   234

   235

/* Intel Rapid Start Technology Support */

   236

#define I217_PROXY_CTRL		BM_PHY_REG(BM_WUC_PAGE, 70)

   237

#define I217_PROXY_CTRL_AUTO_DISABLE	0x0080

   238

#define I217_SxCTRL			PHY_REG(BM_PORT_CTRL_PAGE, 28)

   239

#define I217_SxCTRL_ENABLE_LPI_RESET	0x1000

   240

#define I217_CGFREG			PHY_REG(772, 29)

   241

#define I217_CGFREG_ENABLE_MTA_RESET	0x0002

   242

#define I217_MEMPWR			PHY_REG(772, 26)

   243

#define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010

   244

   245

/* Receive Address Initial CRC Calculation */

   246

#define E1000_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))

   247

   248

/* Latency Tolerance Reporting */

   249

#define E1000_LTRV			0x000F8

   250

#define E1000_LTRV_SCALE_MAX		5

   251

#define E1000_LTRV_SCALE_FACTOR		5

   252

#define E1000_LTRV_REQ_SHIFT		15

   253

#define E1000_LTRV_NOSNOOP_SHIFT	16

   254

#define E1000_LTRV_SEND			(1 << 30)

   255

   256

/* Proprietary Latency Tolerance Reporting PCI Capability */

   257

#define E1000_PCI_LTR_CAP_LPT		0xA8

   258

   259

void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);

   260

void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,

   261

						  bool state);

   262

void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);

   263

void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);

   264

void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);

   265

void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);

   266

s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);

   267

void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);

   268

s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);

   269

s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);

   270

s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);

   271

#endif /* _E1000E_ICH8LAN_H_ */