1

Generator of Canopen SYNC message (cobid = 0x80)

     2

---------------------------------------------

     3

francis.dupin@inrets.fr

     4

27 Janv 2005. 

     5

Revised 13 Dec 2006

     6

     7

     8

Status of the code :

     9

====================

    10

Tested with 

    11

- CanFestival 3 rc2 (cvs version)

    12

- gcc port for HC12 release 3.1

    13

- Microcontroler MC9S12DP256 

    14

on board  T-board (http://www.elektronikladen.de)

    15

    16

    17

    18

To build the example

    19

--------------------

    20

a) Compile CanFestival for hcs12 :

    21

  Go to the root of CanFestival and enter

    22

  ./configure --target=hcs12

    23

  make clean all

    24

    25

b) Build the example

    26

--------------------

    27

 cd examples/gene_SYNC_HCS12

    28

    29

 make clean all

    30

    31

    32

What does the node ?

    33

====================

    34

Just reset it, it should send the SYNC (cobId 0x80) every 10 ms

    35

Informations availables if you connect the serial port 0 to a terminal configured at 38400 8N1

    36

    37

    38

    39

    40

    41

The default values :

    42

nodeId = 0x03

    43

CAN rate = 250 kbps

    44

Please read appli.c, these values can be modified by switch.

    45

    46

    47

If you put the node in operational state, the CAN messages received are filtered : Only the NMT and Nodeguard can be received.

    48

The parameters of the filter are mapped in the object dictionary, so that the filter can be configured by SDO before entering in operational state. See the object dictionary index 2015 to 2023. To have the values applied, always download at 0x2023 index 0 the value 1 before entering in operational.

    49

    50

Read the file objdict.c to see the capabilities of the node. 

    51

    52

    53

    54

    55

    56

    57

    58

    59