Tue, 14 Aug 2018 12:43:43 +0200merged
Edouard Tisserant [Tue, 14 Aug 2018 12:43:43 +0200] rev 2267
merged

Tue, 14 Aug 2018 11:14:20 +0200NevowServer : Added minimalist css style customization and a link to go to settings page and back
dporopat <denis.poropat@smarteh.si> [Tue, 14 Aug 2018 11:14:20 +0200] rev 2266
NevowServer : Added minimalist css style customization and a link to go to settings page and back

Mon, 13 Aug 2018 15:00:51 +0200fixed setServer call in WampClient module. Was doing nothing because _PySrv wasn't global.
Edouard Tisserant [Mon, 13 Aug 2018 15:00:51 +0200] rev 2265
fixed setServer call in WampClient module. Was doing nothing because _PySrv wasn't global.

Mon, 13 Aug 2018 14:58:59 +0200Removed now deprecated ForceReload from WAMP exposed calls
Edouard Tisserant [Mon, 13 Aug 2018 14:58:59 +0200] rev 2264
Removed now deprecated ForceReload from WAMP exposed calls

Mon, 13 Aug 2018 13:24:48 +0200fixed documentation bug
Edouard Tisserant [Mon, 13 Aug 2018 13:24:48 +0200] rev 2263
fixed documentation bug

Mon, 13 Aug 2018 13:24:28 +0200NevowServer : added addInfoString to allow extensions to declare some read-only strings to be displayed in settings. Also renamed addExtension in addSettings for clarity.
Edouard Tisserant [Mon, 13 Aug 2018 13:24:28 +0200] rev 2262
NevowServer : added addInfoString to allow extensions to declare some read-only strings to be displayed in settings. Also renamed addExtension in addSettings for clarity.

Mon, 13 Aug 2018 11:10:23 +0200fixed problems reported by certification testing : vendor identifier acces rights (now read only), and bvlc_maintenance timer was increasing too fast.
Mario de Sousa <msousa@fe.up.pt> [Mon, 13 Aug 2018 11:10:23 +0200] rev 2261
fixed problems reported by certification testing : vendor identifier acces rights (now read only), and bvlc_maintenance timer was increasing too fast.

Thu, 09 Aug 2018 09:07:09 +0200Some blank lines to make bitbucket's PEP8 2.2.0 happy
Edouard Tisserant [Thu, 09 Aug 2018 09:07:09 +0200] rev 2260
Some blank lines to make bitbucket's PEP8 2.2.0 happy

Wed, 08 Aug 2018 13:46:19 +0200merged Andrey's default
Edouard Tisserant [Wed, 08 Aug 2018 13:46:19 +0200] rev 2259
merged Andrey's default

Wed, 01 Aug 2018 13:09:45 +0300Fix wrong code generation if EN/ENO are used in FBD/LD/SFC
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 01 Aug 2018 13:09:45 +0300] rev 2258
Fix wrong code generation if EN/ENO are used in FBD/LD/SFC

This problem appears for example here

--------
------- | MOVE |
| MOVE1 |------|EN ENO|
------- | |
| |
------- | | -----------
| 23 |------|IN OUT|---| LocalVar0 |
------- -------- -----------


--------
------- | MOVE |
| MOVE2 |------|EN ENO|
------- | |
| |
------- | | -----------
| 15 |------|IN OUT|---| LocalVar0 |
------- -------- -----------

Before wrong code was generated for this case:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
LocalVar0 := MOVE6_OUT;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
LocalVar0 := MOVE4_OUT;

With this patch now following code is generated:

MOVE6_OUT := MOVE(EN := move1, IN := 23, ENO => MOVE6_ENO);
IF MOVE6_ENO THEN
LocalVar0 := MOVE6_OUT;
END_IF;
MOVE4_OUT := MOVE(EN := move2, IN := 15, ENO => MOVE4_ENO);
IF MOVE4_ENO THEN
LocalVar0 := MOVE4_OUT;
END_IF;


See discussion here:
https://sourceforge.net/p/beremiz/mailman/message/36378805/

Tue, 31 Jul 2018 14:17:41 +0300Fix flickering in debug panel
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 31 Jul 2018 14:17:41 +0300] rev 2257
Fix flickering in debug panel

This flickering made debug panel unusable, because most of the time
panel was white. This problem effects wxPython with GTK3+ backend
(at least on GNU/Linux systems).

Removed code IIUC draws box with content of moved debug variable, I
don't see any effect of it neither on GNU/Linux nor on Windows. It
should be safe to remove.

Mon, 30 Jul 2018 19:28:39 +0300Fix non-usable toolbar on wxPython with GTK3+
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 30 Jul 2018 19:28:39 +0300] rev 2256
Fix non-usable toolbar on wxPython with GTK3+

On GNU/Linux if wxPython uses wxWidget with GTK3+ backend (this is
what most modern distributions do), then size of EditorToolBar was
always to store only one button.
This is because GetBestSize() is updated only after pane is shown and
updated.
The code does work correctly on python-wxgtk3.0 (gtk2 backend) on
GNU/Linux and with wxpython 2.8 on Windows.

Mon, 30 Jul 2018 19:02:36 +0300Fix problem with decreasing size of StatusToolBar when tools are removed from toolbar.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 30 Jul 2018 19:02:36 +0300] rev 2255
Fix problem with decreasing size of StatusToolBar when tools are removed from toolbar.

StatusToolBar - toolbar with tool to build, clear, connect, ...
This problem appears only in python-wxgtk3.0. In python-wxgtk2.8 there
was not such problem.

If call StatusToolBar.SetMinSize(wx.DefaultSize), all is working, but
following warning message appears:

(Beremiz.py:15155): Gtk-WARNING **: 18:42:24.115: Negative content
width -6 (allocation 1, extents 4x3) while allocating gadget (node
toolbar, owner GtkToolbar)

To avoid that StatusToolBar.GetToolBitmapSize() is used instead of wx.DefaultSize

Sun, 29 Jul 2018 02:00:03 +0300Add BACnet example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sun, 29 Jul 2018 02:00:03 +0300] rev 2254
Add BACnet example

Fri, 27 Jul 2018 22:01:10 +0000Rework README.md, add examples section, add instructions for Modbus extension, more information about runtime.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 27 Jul 2018 22:01:10 +0000] rev 2253
Rework README.md, add examples section, add instructions for Modbus extension, more information about runtime.

Fri, 27 Jul 2018 15:44:20 +0300Add Modbus example
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 27 Jul 2018 15:44:20 +0300] rev 2252
Add Modbus example

Wed, 08 Aug 2018 13:27:44 +0200Disable source quality checking on ethercat plugin - will fix it later
Edouard Tisserant [Wed, 08 Aug 2018 13:27:44 +0200] rev 2251
Disable source quality checking on ethercat plugin - will fix it later

Wed, 08 Aug 2018 13:26:48 +0200Passed bacnet*.py through autopep8, and attemped to fix manually what went wrong + fixed pylint complains
Edouard Tisserant [Wed, 08 Aug 2018 13:26:48 +0200] rev 2250
Passed bacnet*.py through autopep8, and attemped to fix manually what went wrong + fixed pylint complains

Wed, 08 Aug 2018 10:17:19 +0200More pylint+pep8 conformance
Edouard Tisserant [Wed, 08 Aug 2018 10:17:19 +0200] rev 2249
More pylint+pep8 conformance

Wed, 08 Aug 2018 10:15:51 +0200autopep8 + hand made fixes on ProjectController.py runtime/WampClient.py wxglade_hmi/wxglade_hmi.py
Edouard Tisserant [Wed, 08 Aug 2018 10:15:51 +0200] rev 2248
autopep8 + hand made fixes on ProjectController.py runtime/WampClient.py wxglade_hmi/wxglade_hmi.py

Tue, 07 Aug 2018 13:35:28 +0200pylint on runtime/NevowServer.py
Edouard Tisserant [Tue, 07 Aug 2018 13:35:28 +0200] rev 2247
pylint on runtime/NevowServer.py

Mon, 06 Aug 2018 15:36:09 +0200pep8 on runtime/NevowServer.py
Edouard Tisserant [Mon, 06 Aug 2018 15:36:09 +0200] rev 2246
pep8 on runtime/NevowServer.py

Mon, 06 Aug 2018 14:30:43 +0200merged
Edouard Tisserant [Mon, 06 Aug 2018 14:30:43 +0200] rev 2245
merged

Mon, 06 Aug 2018 13:14:50 +0200Make some POU libraries selected by default or not. This changes structure of features.libraries, please check and update your extensions if they use libraries
Edouard Tisserant [Mon, 06 Aug 2018 13:14:50 +0200] rev 2244
Make some POU libraries selected by default or not. This changes structure of features.libraries, please check and update your extensions if they use libraries

Wed, 04 Jul 2018 17:47:38 +0300remove useless code
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 04 Jul 2018 17:47:38 +0300] rev 2243
remove useless code

1. hotkey is already defined in menu string
2. remove duplicated code

Wed, 04 Jul 2018 16:41:02 +0300Add full screen mode (menu and title are hidden)
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 04 Jul 2018 16:41:02 +0300] rev 2242
Add full screen mode (menu and title are hidden)

It's can be switched by pressing Shift-F12 or by clicking button on the toolbar

Tue, 03 Jul 2018 17:09:11 +0300Add information how to make shelve command work with check_source.sh called from hg hook
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 03 Jul 2018 17:09:11 +0300] rev 2241
Add information how to make shelve command work with check_source.sh called from hg hook

and added coresponding flag handling in check_source.sh

Fri, 29 Jun 2018 17:53:57 +0300Automatically increment IEC-location address if copy of the variable is created
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 17:53:57 +0300] rev 2240
Automatically increment IEC-location address if copy of the variable is created

Fri, 29 Jun 2018 15:36:34 +0300Make information about translation to be in unicode
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 15:36:34 +0300] rev 2239
Make information about translation to be in unicode

This is necessary because some translator's names contains non-ASCII
characters and they are not handled properly in about dialog on Windows

Fri, 29 Jun 2018 13:40:11 +0300Take plcopen_icons.svg as source of png icons as well
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:40:11 +0300] rev 2238
Take plcopen_icons.svg as source of png icons as well

generate poe.ico from png images of different sizes.

Fri, 29 Jun 2018 13:36:32 +0300Add 256x256 and 64x64 Beremiz icons
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:36:32 +0300] rev 2237
Add 256x256 and 64x64 Beremiz icons


remove svg:midPointStop tags from icons.svg, because Inkscape
complained about unsupported tag. It seems that these tags were made
by Adobe Illustrator and aren't supported by any other app.

Fri, 29 Jun 2018 13:30:39 +0300Add PLCOpenEditor icon to plcopen_icons.svg
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 29 Jun 2018 13:30:39 +0300] rev 2236
Add PLCOpenEditor icon to plcopen_icons.svg

add 256x256 size to the icon

Wed, 27 Jun 2018 18:13:31 +0300Fix rounding of thousandths of microseconds in duration editor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 18:13:31 +0300] rev 2235
Fix rounding of thousandths of microseconds in duration editor

Wed, 27 Jun 2018 17:13:06 +0300Add checking value in microseconds field in duration editor dialog
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 17:13:06 +0300] rev 2234
Add checking value in microseconds field in duration editor dialog

Wed, 27 Jun 2018 13:57:03 +0300Catch 'clipboard already open' errors in editors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 13:57:03 +0300] rev 2233
Catch 'clipboard already open' errors in editors

Apparently following commits have not fixed the problem completely,
because it still happens (although not so often).

changeset: 2019:b8f795bdfe9f
user: Andrey Skvortsov <andrej.skvortzov@gmail.com>
date: Fri May 25 17:40:29 2018 +0300
summary: fix hangs on mouse selection in case if wxPython uses wxWidgets with GTK3+ support

changeset: 2018:5ce6d08ff2c7
user: Andrey Skvortsov <andrej.skvortzov@gmail.com>
date: Fri May 25 17:23:15 2018 +0300
summary: make clipboard open minimal time as wxPython documentation recommends

Wed, 27 Jun 2018 10:58:45 +0300If task type is changed from 'interrupt' to 'cyclic' init interval with T#20ms.
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 27 Jun 2018 10:58:45 +0300] rev 2232
If task type is changed from 'interrupt' to 'cyclic' init interval with T#20ms.

Tue, 26 Jun 2018 18:02:51 +0300Explicitly enable required libraries in test projects
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 18:02:51 +0300] rev 2231
Explicitly enable required libraries in test projects

Tue, 26 Jun 2018 17:46:37 +0300Disable by default unlisted in project beremiz.xml libraries
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 17:46:37 +0300] rev 2230
Disable by default unlisted in project beremiz.xml libraries

Used libraries should be explicitly enabled.

Tue, 26 Jun 2018 17:34:15 +0300Fix 'DoGetTextExtent - invalid DC' error
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 17:34:15 +0300] rev 2229
Fix 'DoGetTextExtent - invalid DC' error

most likely this error happens only on certain wx backends.
GTK3+ on GNU/Linux is apparently one of them.
The problem is described in wxWidgets issue tracker.
http://trac.wxwidgets.org/ticket/12486

[-------------------------------------------------------------------------------------------------------------------]
platform:
Linux-4.16.0-2-rt-amd64-x86_64-with-debian-buster-sid

python-version:
2.7.15

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1605, in DispatchDebugValuesProc
self.CallWeakcallables("__tick__", "NewDataAvailable", debug_ticks)
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 1585, in CallWeakcallables
function(*cargs)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 1217, in NewDataAvailable
refresh_rect.Union(element.GetRedrawRect())
File "/home/developer/WorkData/PLC/beremiz/beremiz/graphics/GraphicCommons.py", line 1609, in GetRedrawRect
self.ValueSize = self.Parent.GetMiniTextExtent(self.ComputedValue)
File "/home/developer/WorkData/PLC/beremiz/beremiz/editors/Viewer.py", line 932, in GetMiniTextExtent
return self.MiniTextDC.GetTextExtent(text)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 4127, in GetTextExtent
return _gdi_.DC_GetTextExtent(*args, **kwargs)
<class 'wx._core.PyAssertionError'>: C++ assertion "m_graphicContext" failed at ../src/common/dcgraph.cpp(1160) in DoGetTextExtent(): wxGCDC(cg)::DoGetTextExtent - invalid DC

wx-platform:
__WXGTK__

wx-version:
3.0.2.0

[-------------------------------------------------------------------------------------------------------------------]

traceback:
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/LogViewer.py", line 740, in OnMessageToolTipTimer
self.MessageToolTip.SetFont(self.Font)
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 75, in SetFont
self.RefreshTip()
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 158, in RefreshTip
self.SetClientSize(self.GetToolTipSize())
File "/home/developer/WorkData/PLC/beremiz/beremiz/controls/CustomToolTip.py", line 145, in GetToolTipSize
w, h = dc.GetTextExtent(line)
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_gdi.py", line 4127, in GetTextExtent
return _gdi_.DC_GetTextExtent(*args, **kwargs)
<class 'wx._core.PyAssertionError'>: C++ assertion "m_graphicContext" failed at ../src/common/dcgraph.cpp(1160) in DoGetTextExtent(): wxGCDC(cg)::DoGetTextExtent - invalid DC

[-------------------------------------------------------------------------------------------------------------------]

Tue, 26 Jun 2018 14:48:44 +0300Fix size of ProjectDialog used by PLCOpenEditor
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 14:48:44 +0300] rev 2228
Fix size of ProjectDialog used by PLCOpenEditor

Disable scrolling for ProjectDialog, because otherwise very very small
windows is created.
This regression was introduced by 5701225 ("replaced normal panel with scrolled panel under project
properties").

Tue, 26 Jun 2018 10:37:36 +0300Fix some compilation warnings for better ANSI C compliance
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 26 Jun 2018 10:37:36 +0300] rev 2227
Fix some compilation warnings for better ANSI C compliance

Fri, 20 Jul 2018 11:10:42 +0200Customizable columns in VariableTables (i.e. can be monkey patched properly)
Edouard Tisserant [Fri, 20 Jul 2018 11:10:42 +0200] rev 2226
Customizable columns in VariableTables (i.e. can be monkey patched properly)

Fri, 20 Jul 2018 11:05:17 +0200Merged
Edouard Tisserant [Fri, 20 Jul 2018 11:05:17 +0200] rev 2225
Merged

Thu, 19 Jul 2018 13:32:27 +0200Customizable update of toolbar buttons (i.e. 'methods') according to PLCStatus nevow_service_rework
Edouard Tisserant [Thu, 19 Jul 2018 13:32:27 +0200] rev 2224
Customizable update of toolbar buttons (i.e. 'methods') according to PLCStatus

Fri, 13 Jul 2018 09:06:01 +0200Fixed small typo in error message. nevow_service_rework
Edouard Tisserant [Fri, 13 Jul 2018 09:06:01 +0200] rev 2223
Fixed small typo in error message.

Thu, 12 Jul 2018 09:35:09 +0200WAMP : complains about failure to start WAMP only if it was successfully imported. nevow_service_rework
Edouard Tisserant [Thu, 12 Jul 2018 09:35:09 +0200] rev 2222
WAMP : complains about failure to start WAMP only if it was successfully imported.

Wed, 11 Jul 2018 14:32:19 +0200WAMP: now config and secret given in project files always override those given in commandline. Also made extensions web customisations happen before registration of web interface. nevow_service_rework
Edouard Tisserant [Wed, 11 Jul 2018 14:32:19 +0200] rev 2221
WAMP: now config and secret given in project files always override those given in commandline. Also made extensions web customisations happen before registration of web interface.

Tue, 10 Jul 2018 12:54:05 +0200Moved Wamp configuration file selection logic into runtime/wampclient.py. Added Wamp CRA secret file upload and download. Slightly reworked code for config and secret file loading and saving. nevow_service_rework
Edouard Tisserant [Tue, 10 Jul 2018 12:54:05 +0200] rev 2220
Moved Wamp configuration file selection logic into runtime/wampclient.py. Added Wamp CRA secret file upload and download. Slightly reworked code for config and secret file loading and saving.

Tue, 10 Jul 2018 12:51:28 +0200Added a way for extension to register dedicated URL under settings page URL (i.e. /settings/something) nevow_service_rework
Edouard Tisserant [Tue, 10 Jul 2018 12:51:28 +0200] rev 2219
Added a way for extension to register dedicated URL under settings page URL (i.e. /settings/something)

Fri, 06 Jul 2018 15:09:44 +0200Fixed a bit of everything in WAMP, and added web settings for that same extension. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:09:44 +0200] rev 2218
Fixed a bit of everything in WAMP, and added web settings for that same extension.

Fri, 06 Jul 2018 15:07:40 +0200Added some immutable field (platform) in default runtime web setting page, for the example. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:07:40 +0200] rev 2217
Added some immutable field (platform) in default runtime web setting page, for the example.

Fri, 06 Jul 2018 15:05:03 +0200Fix misc typos in exception handling code. nevow_service_rework
Edouard Tisserant [Fri, 06 Jul 2018 15:05:03 +0200] rev 2216
Fix misc typos in exception handling code.

Thu, 05 Jul 2018 13:46:18 +0200Fixed i18n related typo. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:46:18 +0200] rev 2215
Fixed i18n related typo.

Thu, 05 Jul 2018 13:45:24 +0200Fixed typo nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:45:24 +0200] rev 2214
Fixed typo

Thu, 05 Jul 2018 13:44:54 +0200Better logging of Nevow Server import in case of exception. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 13:44:54 +0200] rev 2213
Better logging of Nevow Server import in case of exception.

Thu, 05 Jul 2018 11:11:01 +0200WampClient : Simplified, removed dead code, use exception for handling failures and misconfiguration, check existence of mandatory parameters. nevow_service_rework
Edouard Tisserant [Thu, 05 Jul 2018 11:11:01 +0200] rev 2212
WampClient : Simplified, removed dead code, use exception for handling failures and misconfiguration, check existence of mandatory parameters.

Wed, 04 Jul 2018 14:17:00 +0200Merged #2486, enhancements to WAMP client : auto reconnecting, wamp conf checking and saving, additional attributes for exposed calls, etc nevow_service_rework
Edouard Tisserant [Wed, 04 Jul 2018 14:17:00 +0200] rev 2211
Merged #2486, enhancements to WAMP client : auto reconnecting, wamp conf checking and saving, additional attributes for exposed calls, etc

Wed, 04 Jul 2018 14:10:03 +0200Nevow based web interface now show simple Log message sending form for basic runtime, and allow extensions to add their own web settings. nevow_service_rework
Edouard Tisserant [Wed, 04 Jul 2018 14:10:03 +0200] rev 2210
Nevow based web interface now show simple Log message sending form for basic runtime, and allow extensions to add their own web settings.

Fri, 22 Jun 2018 14:08:34 +0200Now, runtime extensions should be able to add their own settings to web configuration interface. nevow_service_rework
Edouard Tisserant [Fri, 22 Jun 2018 14:08:34 +0200] rev 2209
Now, runtime extensions should be able to add their own settings to web configuration interface.

Fri, 22 Jun 2018 12:43:33 +0200Embrio of setting form, just to test nevow_service_rework
Edouard Tisserant [Fri, 22 Jun 2018 12:43:33 +0200] rev 2208
Embrio of setting form, just to test

Tue, 05 Jun 2018 15:29:58 +0200#2486 Exception if custom protocol options are wrong. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 05 Jun 2018 15:29:58 +0200] rev 2207
#2486 Exception if custom protocol options are wrong.

Fri, 18 May 2018 11:05:49 +0200#2486 ExposedCalls with register options as a dictionary. #2486
dporopat <denis.poropat@smarteh.si> [Fri, 18 May 2018 11:05:49 +0200] rev 2206
#2486 ExposedCalls with register options as a dictionary.

Mon, 14 May 2018 13:05:54 +0200#2486 Renaming functions. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 13:05:54 +0200] rev 2205
#2486 Renaming functions.

Mon, 14 May 2018 08:45:44 +0200#2486 Reconnect funtion in SaveWampClientConf function. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 08:45:44 +0200] rev 2204
#2486 Reconnect funtion in SaveWampClientConf function.

Wed, 09 May 2018 09:59:53 +0200#2486 Modified reconnect function. Added 'active' parameter to wampconf.json file. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 09:59:53 +0200] rev 2203
#2486 Modified reconnect function. Added 'active' parameter to wampconf.json file.

Thu, 19 Apr 2018 13:40:56 +0200#2486 Adding reconnect funtion to WampClient. Global TransportFactory not needed anymore. #2486
dporopat <denis.poropat@smarteh.si> [Thu, 19 Apr 2018 13:40:56 +0200] rev 2202
#2486 Adding reconnect funtion to WampClient. Global TransportFactory not needed anymore.

Wed, 18 Apr 2018 10:42:33 +0200#2486 Added global TransportFactory, needed in WebInterface reconnecting function. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 18 Apr 2018 10:42:33 +0200] rev 2201
#2486 Added global TransportFactory, needed in WebInterface reconnecting function.

Wed, 18 Apr 2018 10:40:16 +0200#2486 WampClient needs pyro.plcobj before registration calls. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 18 Apr 2018 10:40:16 +0200] rev 2200
#2486 WampClient needs pyro.plcobj before registration calls.

Wed, 11 Apr 2018 10:53:48 +0200#2486 Fix if protocol, register options are not present in wapmconf.json file. #2486
dporopat <denis.poropat@smarteh.si> [Wed, 11 Apr 2018 10:53:48 +0200] rev 2199
#2486 Fix if protocol, register options are not present in wapmconf.json file.

Tue, 10 Apr 2018 12:08:23 +0200#2486 Added ExposedProgressCalls list using details argument for registration progress calls. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 12:08:23 +0200] rev 2198
#2486 Added ExposedProgressCalls list using details argument for registration progress calls.

Tue, 10 Apr 2018 10:44:46 +0200#2486 Unnecessary variable removed. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 10:44:46 +0200] rev 2197
#2486 Unnecessary variable removed.

Tue, 10 Apr 2018 09:54:22 +0200#2486 Added option to use websocket register options. Added function getValidOptins to read options from wampconf.json. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 09:54:22 +0200] rev 2196
#2486 Added option to use websocket register options. Added function getValidOptins to read options from wampconf.json.

Mon, 09 Apr 2018 14:38:38 +0200#2486 Added option to use websocket protocol options. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 09 Apr 2018 14:38:38 +0200] rev 2195
#2486 Added option to use websocket protocol options.

Tue, 27 Mar 2018 10:11:04 +0200#2486 Updated wamp test project to work with the latest Crossbar version. #2486
dporopat <denis.poropat@smarteh.si> [Tue, 27 Mar 2018 10:11:04 +0200] rev 2194
#2486 Updated wamp test project to work with the latest Crossbar version.

Mon, 19 Mar 2018 12:18:07 +0100#2486 Reset delay function added. It resets the delay and the retry counter on reconnect. #2486
dporopat <denis.poropat@smarteh.si> [Mon, 19 Mar 2018 12:18:07 +0100] rev 2193
#2486 Reset delay function added. It resets the delay and the retry counter on reconnect.

Sat, 23 Jun 2018 09:17:20 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 23 Jun 2018 09:17:20 +0200] rev 2192
merge

Sat, 23 Jun 2018 09:16:35 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 23 Jun 2018 09:16:35 +0200] rev 2191
merge

Mon, 18 Jun 2018 12:17:07 +0300Fix compilation warning/error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Jun 2018 12:17:07 +0300] rev 2190
Fix compilation warning/error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]

Mon, 18 Jun 2018 12:12:57 +0300merge
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Mon, 18 Jun 2018 12:12:57 +0300] rev 2189
merge

Fri, 15 Jun 2018 09:48:05 +0200WxGlade HMI extension now does only instanciate wx object who's name match extension's name. If no object match the name and no code is provided in 'start' user python code section, then a warning is issued
Edouard Tisserant [Fri, 15 Jun 2018 09:48:05 +0200] rev 2188
WxGlade HMI extension now does only instanciate wx object who's name match extension's name. If no object match the name and no code is provided in 'start' user python code section, then a warning is issued

Wed, 13 Jun 2018 08:54:13 +0200BACnet : ensure that Init did happen before continuing with PLC startup.
Edouard Tisserant [Wed, 13 Jun 2018 08:54:13 +0200] rev 2187
BACnet : ensure that Init did happen before continuing with PLC startup.

Fri, 15 Jun 2018 16:41:55 +0300Update list of files with strings for i18n and templates for translations
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Jun 2018 16:41:55 +0300] rev 2186
Update list of files with strings for i18n and templates for translations

Fri, 15 Jun 2018 16:30:06 +0300Add small contributing document with information about codestyle checking
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Jun 2018 16:30:06 +0300] rev 2185
Add small contributing document with information about codestyle checking

Fri, 15 Jun 2018 16:12:50 +0300Add argument to set list of source files to check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 15 Jun 2018 16:12:50 +0300] rev 2184
Add argument to set list of source files to check

This is necessary, in case you want to use docker run in pretxncommit
Mercurial hook. Unfortunately for some reason if hg running in
container can't find just created commit defined by $HG_NODE. And it
throws error 'unknown revision'.

Here is example for hgrc.

[hooks]
pretxncommit.linter = hg status -m -n -a -n -I '**.py' --change $HG_NODE > files.lst && docker run --volume=$PWD:/beremiz --workdir="/beremiz" --volume=$PWD/../CanFestival-3:/CanFestival-3 --memory=1g --entrypoint=/beremiz/tests/tools/check_source.sh skvorl/beremiz-requirements --files-to-check files.lst

Sat, 09 Jun 2018 17:59:46 +0300check_source.sh: handle case if there are no files to check
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 09 Jun 2018 17:59:46 +0300] rev 2183
check_source.sh: handle case if there are no files to check

Sat, 09 Jun 2018 17:14:56 +0300Fix linter errors
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 09 Jun 2018 17:14:56 +0300] rev 2182
Fix linter errors

Sat, 09 Jun 2018 17:13:16 +0300Add command line argument to run linter only on changed files
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Sat, 09 Jun 2018 17:13:16 +0300] rev 2181
Add command line argument to run linter only on changed files

./tests/tools/check_source.sh --only-changes

It's recommended to run check_source.sh automatically on each commit,
so the rules are always enforced.
Even better is to use docker for that, so the versions of pep8 and
pylint are the same as on pipeline server.

To do this couple of lines should be added into repository's hgrc file.

[----------- cut from .hg/hgrc------------------]

[hooks]
precommit.linter = ./tests/tools/check_source.sh --only-changes
# precommit.linter = docker run -it --volume=$PWD:/beremiz --workdir="/beremiz" --volume=$PWD/../CanFestival-3:/CanFestival-3 --memory=1g --entrypoint=/beremiz/tests/tools/check_source.sh skvorl/beremiz-requirements --only-changes

[-----------------------------------------------]

Fri, 08 Jun 2018 15:10:27 +0300Don't use fixed width labels in WAMP and PYRO dialogs
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 08 Jun 2018 15:10:27 +0300] rev 2180
Don't use fixed width labels in WAMP and PYRO dialogs

This causes problems if labels are translated into other languages and
width wasn't enough.

Thu, 07 Jun 2018 16:58:13 +0300Fix internatialization in UriLocationEditor, PYRO dialog and Modbus configurator
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 16:58:13 +0300] rev 2179
Fix internatialization in UriLocationEditor, PYRO dialog and Modbus configurator

Thu, 07 Jun 2018 16:53:21 +0300Add copyright headers to retain implementation for GNU/Linux and Win32
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 16:53:21 +0300] rev 2178
Add copyright headers to retain implementation for GNU/Linux and Win32

Thu, 07 Jun 2018 16:31:26 +0300Drop support for wxPython 2.6 and below
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 16:31:26 +0300] rev 2177
Drop support for wxPython 2.6 and below

Thu, 07 Jun 2018 14:45:03 +0300Autoresize UriLocationEditor dialog window
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 14:45:03 +0300] rev 2176
Autoresize UriLocationEditor dialog window

Thu, 07 Jun 2018 14:12:18 +0300Fix compilation problem in case of TARGET_LOGGING_DISABLE turned on and TARGET_DEBUG_DISABLE turned off
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 14:12:18 +0300] rev 2175
Fix compilation problem in case of TARGET_LOGGING_DISABLE turned on and TARGET_DEBUG_DISABLE turned off

Thu, 07 Jun 2018 14:04:45 +0300Use the same retain implementation for Win32 targets
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 14:04:45 +0300] rev 2174
Use the same retain implementation for Win32 targets

Currently plc_Win32_main_retain.c is exact copy of
plc_Linux_main_retain.c, because it's not possible to use symbol
links.

It'd be nice in the future to have possibility to modify targets.code.

Thu, 07 Jun 2018 13:45:35 +0300Add retain basic implementation on GNU/Linux
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Thu, 07 Jun 2018 13:45:35 +0300] rev 2173
Add retain basic implementation on GNU/Linux

Retain is saved in file and backup of this file is done every time.
File isn't saved on every PLC cycle to avoid high I/O load.
By default, retain is saved every second and on PLC stop/shutdown.
It's possible to override retain flush period by using CFLAGS option
in project's settings. For example, for 0.5 seconds period
use "-DFILE_RETAIN_SAVE_PERIOD_S=0.5".

Fri, 01 Jun 2018 15:46:17 +0300Add helper function GetRetainSize()
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 01 Jun 2018 15:46:17 +0300] rev 2172
Add helper function GetRetainSize()

it will be useful for retain implementations.

Fri, 01 Jun 2018 12:21:37 +0300use CLOCK_MONOTONIC instead of CLOCK_REALTIME for timer setup
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 01 Jun 2018 12:21:37 +0300] rev 2171
use CLOCK_MONOTONIC instead of CLOCK_REALTIME for timer setup

CLOCK_REALTIME is a wall clock, that could change back and forth (user
changes system time, winter/summer time, NTP corrections and so on).
For real-time application CLOCK_MONOTONIC should be used, it doesn't
have such jumps.

Thu, 31 May 2018 13:07:10 +0300Add function example to first_steps example
Surkov Sergey <surkovsv93@gmail.com> [Thu, 31 May 2018 13:07:10 +0300] rev 2170
Add function example to first_steps example

It'll be used in documentation to show how to create function in
Beremiz.

Fri, 25 May 2018 18:37:59 +0300fix type introduced by f33942053466 (fix pylint warning "(undefined-loop-variable) Using possibly undefined loop variable 'X'")
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 May 2018 18:37:59 +0300] rev 2169
fix type introduced by f33942053466 (fix pylint warning "(undefined-loop-variable) Using possibly undefined loop variable 'X'")

Fri, 25 May 2018 18:34:05 +0300Build by default with optimization level -O2 for GCC
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 May 2018 18:34:05 +0300] rev 2168
Build by default with optimization level -O2 for GCC

before -O0 was used by default, that caused pretty bad performance.

Amd64, i6700k, 4200MHz, GNU/Linux (non-RT kernel), gcc 7.2.0

-------------------------------------
Optimization | EN/ENO |no EN/ENO |
-------------------------------------
default | 11 | 9.5 |
-O3 | 3.9 | 5.2 |
-O2 | 4 | 4.8 |
-Os | 4.1 | 3.5 |
-Ofast | 3.9 | 5.2 |
-------------------------------------

ARM, BBB Cortex-A8, 600Mhz, GNU/Linux, gcc 4.6.3

-------------------------------------
Optimization | EN/ENO |no EN/ENO |
-------------------------------------
default | 273 | 226 |
-O3 | 141.8 | 106.2 |
-O2 | 142 | 107 |
-Os | 152.5 | 112.2 |
-Ofast | 141.7 | 106.2 |
-------------------------------------

For embedded systems with size constaints (like Cortex-Mx, AVR and so
on) I usually use -Os. It gets pretty good results. For
GNU/Linux-based systems -O2 is usually a good choice, as you see the
test results.

Fri, 25 May 2018 17:40:29 +0300fix hangs on mouse selection in case if wxPython uses wxWidgets with GTK3+ support
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 May 2018 17:40:29 +0300] rev 2167
fix hangs on mouse selection in case if wxPython uses wxWidgets with GTK3+ support

This is default configuration on Debian Buster+ and Ubuntu 18.04+.
Probably it'll fix completely problem with 'clipboard already open'
described in the previous commit 5ce6d08f ("make clipboard open minimal time as wxPython documentation recommends")

Fri, 25 May 2018 17:23:15 +0300make clipboard open minimal time as wxPython documentation recommends
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Fri, 25 May 2018 17:23:15 +0300] rev 2166
make clipboard open minimal time as wxPython documentation recommends

https://wxpython.org/Phoenix/docs/html/wx.Clipboard.html#wx.Clipboard.GetData

"Call wx.Clipboard.Open to get ownership of the clipboard. If this
operation returns True, you now own the clipboard. Call
wx.Clipboard.SetData to put data on the clipboard, or
wx.Clipboard.GetData to retrieve data from the clipboard. Call
wx.Clipboard.Close to close the clipboard and relinquish ownership.
You should keep the clipboard open only momentarily."

Maybe it makes situation with pretty annoying error 'clipboard already
open' a little bit better.

traceback:
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/BeremizIDE.py", line 955, in OnSaveProjectMenu
self.RefreshAfterSave()
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/BeremizIDE.py", line 946, in RefreshAfterSave
self._Refresh(TITLE, FILEMENU, EDITMENU, PAGETITLES)
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/IDEFrame.py", line 926, in _Refresh
self.RefreshFunctions[element]()
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/BeremizIDE.py", line 766, in RefreshEditMenu
IDEFrame.RefreshEditMenu(self)
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/IDEFrame.py", line 1185, in RefreshEditMenu
if self.GetCopyBuffer() is not None:
File "/home/developer/WorkData/PLC/beremiz/avangard-beremiz-ide/src/../../beremiz/IDEFrame.py", line 956, in GetCopyBuffer
if wx.TheClipboard.Open():
File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk3/wx/_misc.py", line 5793, in Open
return _misc_.Clipboard_Open(*args, **kwargs)
<class 'wx._core.PyAssertionError'>: C++ assertion "!m_open" failed at ../src/gtk/clipbrd.cpp(598) in Open(): clipboard already open

Sat, 23 Jun 2018 09:08:13 +0200Merged GPL + LGPL v2 or later EtherCAT extension. Fixed headers and copyright notice.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 23 Jun 2018 09:08:13 +0200] rev 2165
Merged GPL + LGPL v2 or later EtherCAT extension. Fixed headers and copyright notice.

Mon, 11 Aug 2014 23:13:35 +0200Propagated matiec changes in FB var accessors
Edouard Tisserant [Mon, 11 Aug 2014 23:13:35 +0200] rev 2164
Propagated matiec changes in FB var accessors

Wed, 02 Apr 2014 21:22:35 +0200Fixed most obvious bugs appear after grafting changes from previous development branches : re-enable openning non-CoE, CoE and CiA 402 nodes config
Edouard Tisserant [Wed, 02 Apr 2014 21:22:35 +0200] rev 2163
Fixed most obvious bugs appear after grafting changes from previous development branches : re-enable openning non-CoE, CoE and CiA 402 nodes config

Wed, 02 Oct 2013 10:46:18 +0200Fixed xslt stylesheet for extracting entries defined in module, rewiting xslt stylesheet to yslt
Laurent Bessard [Wed, 02 Oct 2013 10:46:18 +0200] rev 2162
Fixed xslt stylesheet for extracting entries defined in module, rewiting xslt stylesheet to yslt

Mon, 30 Sep 2013 13:43:02 +0200Fixed bug in information returned for module where entries are defined only in PDO mapping
Laurent Bessard [Mon, 30 Sep 2013 13:43:02 +0200] rev 2161
Fixed bug in information returned for module where entries are defined only in PDO mapping

Fri, 27 Sep 2013 17:49:40 +0200Added support for loading XML file even if not following XSD schema (but still following XML syntax), warning user of errors in XML file
Laurent Bessard [Fri, 27 Sep 2013 17:49:40 +0200] rev 2160
Added support for loading XML file even if not following XSD schema (but still following XML syntax), warning user of errors in XML file

Tue, 24 Sep 2013 15:18:25 +0200Fixed bug when compiling
Laurent Bessard [Tue, 24 Sep 2013 15:18:25 +0200] rev 2159
Fixed bug when compiling

Tue, 24 Sep 2013 00:50:02 +0200Fixed higen example removing obsolete attribute in CIA402 node params file
Laurent Bessard [Tue, 24 Sep 2013 00:50:02 +0200] rev 2158
Fixed higen example removing obsolete attribute in CIA402 node params file

Tue, 24 Sep 2013 00:48:21 +0200Fixed controllers for working with latest version of xmlclass
Laurent Bessard [Tue, 24 Sep 2013 00:48:21 +0200] rev 2157
Fixed controllers for working with latest version of xmlclass

Tue, 25 Jun 2013 00:55:38 +0200Added bug in support for set flag for optional variables activation in axis public struct
Laurent Bessard [Tue, 25 Jun 2013 00:55:38 +0200] rev 2156
Added bug in support for set flag for optional variables activation in axis public struct

Mon, 24 Jun 2013 23:53:57 +0200Added support for set flag for optional variables activation in axis public struct
Laurent Bessard [Mon, 24 Jun 2013 23:53:57 +0200] rev 2155
Added support for set flag for optional variables activation in axis public struct

Mon, 24 Jun 2013 21:03:22 +0200Replaced location for axis ref from %IW(location).0 to %IW(location).402. Added location for network position at %IW(location).
Laurent Bessard [Mon, 24 Jun 2013 21:03:22 +0200] rev 2154
Replaced location for axis ref from %IW(location).0 to %IW(location).402. Added location for network position at %IW(location).

Mon, 24 Jun 2013 09:23:28 +0200Rewrite CIA402 node specific code generating part
Laurent Bessard [Mon, 24 Jun 2013 09:23:28 +0200] rev 2153
Rewrite CIA402 node specific code generating part

Wed, 02 Apr 2014 15:03:32 +0200Cherry-pick and re-commit to legitimate ancestor of commit 'Ethercat Management Function Refactoring Source by RTES Lab.' from youcu <youcu1022@gmail.com>
Edouard Tisserant [Wed, 02 Apr 2014 15:03:32 +0200] rev 2152
Cherry-pick and re-commit to legitimate ancestor of commit 'Ethercat Management Function Refactoring Source by RTES Lab.' from youcu <youcu1022@gmail.com>

Mon, 03 Jun 2013 08:24:08 +0200Fixed bug when drag'n dropping variable in master startup command grid
Laurent Bessard [Mon, 03 Jun 2013 08:24:08 +0200] rev 2151
Fixed bug when drag'n dropping variable in master startup command grid

Tue, 21 May 2013 16:03:40 +0900Moved ratio scaling back to MCL. Rewrote CiA402 C part in a way it can be read and understood by some humans.
Edouard Tisserant [Tue, 21 May 2013 16:03:40 +0900] rev 2150
Moved ratio scaling back to MCL. Rewrote CiA402 C part in a way it can be read and understood by some humans.

Thu, 16 May 2013 23:21:01 +0200Added icon for Ethercat extension root and Ethercat master node
Laurent Bessard [Thu, 16 May 2013 23:21:01 +0200] rev 2149
Added icon for Ethercat extension root and Ethercat master node

Fri, 10 May 2013 09:16:07 +0200Fixed bug with global instance declaration
Laurent Bessard [Fri, 10 May 2013 09:16:07 +0200] rev 2148
Fixed bug with global instance declaration

Fri, 10 May 2013 08:44:05 +0200Fix bug in when moving Ethercat slaves fixed
Laurent Bessard [Fri, 10 May 2013 08:44:05 +0200] rev 2147
Fix bug in when moving Ethercat slaves fixed

Wed, 08 May 2013 10:40:06 +0200Added mapping for TouchProbe function in CIA402 slave node
Laurent Bessard [Wed, 08 May 2013 10:40:06 +0200] rev 2146
Added mapping for TouchProbe function in CIA402 slave node

Fri, 03 May 2013 13:47:51 +0200Fixed bug with axes boolean parameters value
Laurent Bessard [Fri, 03 May 2013 13:47:51 +0200] rev 2145
Fixed bug with axes boolean parameters value

Thu, 02 May 2013 13:40:35 +0200Added error message when a device informations can't be found in ESI files
Laurent Bessard [Thu, 02 May 2013 13:40:35 +0200] rev 2144
Added error message when a device informations can't be found in ESI files

Thu, 02 May 2013 10:21:47 +0200Fixed ToolTip on VariablesGrid columns on Windows
Laurent Bessard [Thu, 02 May 2013 10:21:47 +0200] rev 2143
Fixed ToolTip on VariablesGrid columns on Windows

Tue, 30 Apr 2013 01:39:54 +0200Update higen drive example introducing usage of csv mode
Laurent Bessard [Tue, 30 Apr 2013 01:39:54 +0200] rev 2142
Update higen drive example introducing usage of csv mode

Tue, 30 Apr 2013 01:31:47 +0200Merged
Laurent Bessard [Tue, 30 Apr 2013 01:31:47 +0200] rev 2141
Merged

Mon, 29 Apr 2013 11:07:32 +0200Fixed bug in support for module extra params in EthercatCFileGenerator
Laurent Bessard [Mon, 29 Apr 2013 11:07:32 +0200] rev 2140
Fixed bug in support for module extra params in EthercatCFileGenerator

Mon, 29 Apr 2013 11:03:06 +0200Added support for module extra params in EthercatCFileGenerator
Laurent Bessard [Mon, 29 Apr 2013 11:03:06 +0200] rev 2139
Added support for module extra params in EthercatCFileGenerator

Fri, 26 Apr 2013 23:23:09 +0200Fixed support for multiple module extra params in ModulesLibrary
Laurent Bessard [Fri, 26 Apr 2013 23:23:09 +0200] rev 2138
Fixed support for multiple module extra params in ModulesLibrary

Fri, 26 Apr 2013 13:57:10 +0200Added support for multiple module extra params in ModulesLibrary
Laurent Bessard [Fri, 26 Apr 2013 13:57:10 +0200] rev 2137
Added support for multiple module extra params in ModulesLibrary

Thu, 25 Apr 2013 23:01:06 +0200Added support for using CIA402 motion mode csp, csv and cst
Laurent Bessard [Thu, 25 Apr 2013 23:01:06 +0200] rev 2136
Added support for using CIA402 motion mode csp, csv and cst

Fri, 26 Apr 2013 13:59:43 +0200Fixed order of LocationCFilesAndCFLAGS, master was called after slaves in PLC init and retrieve functions
Laurent Bessard [Fri, 26 Apr 2013 13:59:43 +0200] rev 2135
Fixed order of LocationCFilesAndCFLAGS, master was called after slaves in PLC init and retrieve functions

Wed, 24 Apr 2013 23:27:35 +0200Fixed bug on Windows with sizers on Windows in Master Editor panel when its size changed
Laurent Bessard [Wed, 24 Apr 2013 23:27:35 +0200] rev 2134
Fixed bug on Windows with sizers on Windows in Master Editor panel when its size changed

Wed, 24 Apr 2013 17:27:31 +0200Fixed Save As... function in Beremiz
Laurent Bessard [Wed, 24 Apr 2013 17:27:31 +0200] rev 2133
Fixed Save As... function in Beremiz

Mon, 22 Apr 2013 23:54:22 +0200Added support for stopping SDOThreadProc when stopping PLC
Laurent Bessard [Mon, 22 Apr 2013 23:54:22 +0200] rev 2132
Added support for stopping SDOThreadProc when stopping PLC

Mon, 22 Apr 2013 09:30:48 +0200Fixed bug when modifying slave module type
Laurent Bessard [Mon, 22 Apr 2013 09:30:48 +0200] rev 2131
Fixed bug when modifying slave module type

Fri, 19 Apr 2013 00:55:40 +0200Fixed bug in filters behavior on Windows
Laurent Bessard [Fri, 19 Apr 2013 00:55:40 +0200] rev 2130
Fixed bug in filters behavior on Windows

Thu, 18 Apr 2013 00:48:32 +0200Fixed filter behavior in MasterEditor and SlaveEditor
Laurent Bessard [Thu, 18 Apr 2013 00:48:32 +0200] rev 2129
Fixed filter behavior in MasterEditor and SlaveEditor

Tue, 16 Apr 2013 00:53:38 +0200Fixed CIA402 node template for working with MC_Power modification removing implicit set position
Laurent Bessard [Tue, 16 Apr 2013 00:53:38 +0200] rev 2128
Fixed CIA402 node template for working with MC_Power modification removing implicit set position

Mon, 15 Apr 2013 00:40:47 +0200Fix scan network functionality, project tree not refreshed after adding slaves
Laurent Bessard [Mon, 15 Apr 2013 00:40:47 +0200] rev 2127
Fix scan network functionality, project tree not refreshed after adding slaves

Mon, 15 Apr 2013 00:37:59 +0200Rollback last commit
Laurent Bessard [Mon, 15 Apr 2013 00:37:59 +0200] rev 2126
Rollback last commit

Sat, 13 Apr 2013 12:27:49 +0200Fixed CIA402 node template for working with MC_Power modification removing implicit set position
Laurent Bessard [Sat, 13 Apr 2013 12:27:49 +0200] rev 2125
Fixed CIA402 node template for working with MC_Power modification removing implicit set position

Sat, 13 Apr 2013 02:14:37 +0200Fixed bugs in drag'n drop from variables panel in master and slaves editor panel
Laurent Bessard [Sat, 13 Apr 2013 02:14:37 +0200] rev 2124
Fixed bugs in drag'n drop from variables panel in master and slaves editor panel

Sat, 13 Apr 2013 01:40:31 +0200Added initialization of abort_code and result_size to prevent warning message if not used in following code
Laurent Bessard [Sat, 13 Apr 2013 01:40:31 +0200] rev 2123
Added initialization of abort_code and result_size to prevent warning message if not used in following code

Sat, 13 Apr 2013 01:39:05 +0200Fixed header files inclusion in CIA402 node template file
Laurent Bessard [Sat, 13 Apr 2013 01:39:05 +0200] rev 2122
Fixed header files inclusion in CIA402 node template file

Fri, 12 Apr 2013 15:41:22 +0900Fixed (again) some non-clean exit in case of SDO failure at init
Edouard Tisserant [Fri, 12 Apr 2013 15:41:22 +0900] rev 2121
Fixed (again) some non-clean exit in case of SDO failure at init

Thu, 11 Apr 2013 10:32:58 +0200Merged
Laurent Bessard [Thu, 11 Apr 2013 10:32:58 +0200] rev 2120
Merged

Fri, 05 Apr 2013 00:14:00 +0200Fixed ethercat test with higen drive project
Laurent Bessard [Fri, 05 Apr 2013 00:14:00 +0200] rev 2119
Fixed ethercat test with higen drive project

Fri, 05 Apr 2013 00:09:54 +0200Fixed bug when using real axis and simulated axis at the same time (got the same index)
Laurent Bessard [Fri, 05 Apr 2013 00:09:54 +0200] rev 2118
Fixed bug when using real axis and simulated axis at the same time (got the same index)

Fri, 05 Apr 2013 21:47:37 +0900Now failure in template based part of C code also release the master for later use...
Edouard Tisserant [Fri, 05 Apr 2013 21:47:37 +0900] rev 2117
Now failure in template based part of C code also release the master for later use...

Fri, 05 Apr 2013 16:49:41 +0900Better logging, saffer failure at init (allows restart)
Edouard Tisserant [Fri, 05 Apr 2013 16:49:41 +0900] rev 2116
Better logging, saffer failure at init (allows restart)

Fri, 05 Apr 2013 11:55:09 +0900Added error logging when SDO FB fails
Edouard Tisserant [Fri, 05 Apr 2013 11:55:09 +0900] rev 2115
Added error logging when SDO FB fails

Thu, 04 Apr 2013 17:50:43 +0900Added logging based on collecting Kernel logs
Edouard Tisserant [Thu, 04 Apr 2013 17:50:43 +0900] rev 2114
Added logging based on collecting Kernel logs

Thu, 04 Apr 2013 14:32:02 +0900Fixed typo
Edouard Tisserant [Thu, 04 Apr 2013 14:32:02 +0900] rev 2113
Fixed typo

Fri, 29 Mar 2013 14:25:10 +0900Fixed linking with non RTDM etherlab lib. Now with rtdm...
Edouard Tisserant [Fri, 29 Mar 2013 14:25:10 +0900] rev 2112
Fixed linking with non RTDM etherlab lib. Now with rtdm...

Fri, 29 Mar 2013 01:15:01 +0100Split etherlab.py into multiple files
Laurent Bessard [Fri, 29 Mar 2013 01:15:01 +0100] rev 2111
Split etherlab.py into multiple files

Fri, 29 Mar 2013 01:13:17 +0100Fixed bug with process variables grid
Laurent Bessard [Fri, 29 Mar 2013 01:13:17 +0100] rev 2110
Fixed bug with process variables grid

Thu, 28 Mar 2013 18:06:03 +0900Stripped useless depricated comments, changed print format of sdo abort code
Edouard Tisserant [Thu, 28 Mar 2013 18:06:03 +0900] rev 2109
Stripped useless depricated comments, changed print format of sdo abort code

Thu, 28 Mar 2013 15:50:23 +0900Updated generated code to etherlab 1.5.2
Edouard Tisserant [Thu, 28 Mar 2013 15:50:23 +0900] rev 2108
Updated generated code to etherlab 1.5.2

Tue, 26 Mar 2013 12:42:49 +0900Added Logging
Edouard Tisserant [Tue, 26 Mar 2013 12:42:49 +0900] rev 2107
Added Logging

Tue, 26 Mar 2013 09:34:30 +0900Now use beremiz.h
Edouard Tisserant [Tue, 26 Mar 2013 09:34:30 +0900] rev 2106
Now use beremiz.h

Wed, 20 Mar 2013 09:17:15 +0100Fixed bugs in Network Configuration Editor
Laurent Bessard [Wed, 20 Mar 2013 09:17:15 +0100] rev 2105
Fixed bugs in Network Configuration Editor

Thu, 14 Mar 2013 17:29:59 +0900CiA402 now fills NetworkPosition member of public axis struct
Edouard Tisserant [Thu, 14 Mar 2013 17:29:59 +0900] rev 2104
CiA402 now fills NetworkPosition member of public axis struct

Thu, 07 Mar 2013 00:54:45 +0100Fixed bugs in process variables generated code
Laurent Bessard [Thu, 07 Mar 2013 00:54:45 +0100] rev 2103
Fixed bugs in process variables generated code

Wed, 06 Mar 2013 19:25:20 +0100Added specific add menu for directly choose slave type while adding new slave
Laurent Bessard [Wed, 06 Mar 2013 19:25:20 +0100] rev 2102
Added specific add menu for directly choose slave type while adding new slave

Wed, 06 Mar 2013 18:38:17 +0100Added code generation for process variables
Laurent Bessard [Wed, 06 Mar 2013 18:38:17 +0100] rev 2101
Added code generation for process variables

Wed, 06 Mar 2013 18:37:23 +0100Fixed modifications in Startup Commands grid
Laurent Bessard [Wed, 06 Mar 2013 18:37:23 +0100] rev 2100
Fixed modifications in Startup Commands grid

Tue, 05 Mar 2013 23:04:59 +0100Improved Ethercat Network Configurator panels
Laurent Bessard [Tue, 05 Mar 2013 23:04:59 +0100] rev 2099
Improved Ethercat Network Configurator panels

Tue, 05 Mar 2013 00:59:34 +0100Improved Ethercat Network Configurator panels
Laurent Bessard [Tue, 05 Mar 2013 00:59:34 +0100] rev 2098
Improved Ethercat Network Configurator panels

Wed, 27 Feb 2013 22:40:45 +0100Added panel for managing ESI files from project and from database including module PDO alignment setting
Laurent Bessard [Wed, 27 Feb 2013 22:40:45 +0100] rev 2097
Added panel for managing ESI files from project and from database including module PDO alignment setting

Thu, 07 Feb 2013 00:59:50 +0100Added support for MC_*DigitalOutput, MC_ReadAxisInfo and MC_ReadAxisError blocks from MCL in DS402 nodes generated code
Laurent Bessard [Thu, 07 Feb 2013 00:59:50 +0100] rev 2096
Added support for MC_*DigitalOutput, MC_ReadAxisInfo and MC_ReadAxisError blocks from MCL in DS402 nodes generated code

Wed, 30 Jan 2013 23:46:58 +0100Replaced SplitterWindow in ConfTreeNodeEditor by Notebook
Laurent Bessard [Wed, 30 Jan 2013 23:46:58 +0100] rev 2095
Replaced SplitterWindow in ConfTreeNodeEditor by Notebook

Fri, 16 Nov 2012 23:43:45 +0100Fix bug in support for Etherlab specific fieldbus interface function blocks
Laurent Bessard [Fri, 16 Nov 2012 23:43:45 +0100] rev 2094
Fix bug in support for Etherlab specific fieldbus interface function blocks

Fri, 16 Nov 2012 00:23:35 +0100Fix bug in support for Etherlab specific fieldbus interface function blocks
Laurent Bessard [Fri, 16 Nov 2012 00:23:35 +0100] rev 2093
Fix bug in support for Etherlab specific fieldbus interface function blocks

Thu, 15 Nov 2012 22:43:44 +0100Adding support for Etherlab specific function blocks for MCL fieldbus interface function blocks
Laurent Bessard [Thu, 15 Nov 2012 22:43:44 +0100] rev 2092
Adding support for Etherlab specific function blocks for MCL fieldbus interface function blocks

Fri, 09 Nov 2012 11:27:30 +0100Adding support for extracting ActualVelocity from CIA402 nodes PDOs
Laurent Bessard [Fri, 09 Nov 2012 11:27:30 +0100] rev 2091
Adding support for extracting ActualVelocity from CIA402 nodes PDOs

Fri, 09 Nov 2012 11:25:44 +0100Fix bug in EtherLabSDODownload function block
Laurent Bessard [Fri, 09 Nov 2012 11:25:44 +0100] rev 2090
Fix bug in EtherLabSDODownload function block

Wed, 31 Oct 2012 12:06:04 +0100Fix bug when Drag'n Dropping located variables on Windows
Laurent Bessard [Wed, 31 Oct 2012 12:06:04 +0100] rev 2089
Fix bug when Drag'n Dropping located variables on Windows

Wed, 31 Oct 2012 11:54:26 +0100Adding support for using Etherlab SDO function blocks in MCL
Laurent Bessard [Wed, 31 Oct 2012 11:54:26 +0100] rev 2088
Adding support for using Etherlab SDO function blocks in MCL

Tue, 30 Oct 2012 00:22:29 +0100Updating ethercat example for higen drive adding an example of Ethercat SDO upload block usage
Laurent Bessard [Tue, 30 Oct 2012 00:22:29 +0100] rev 2087
Updating ethercat example for higen drive adding an example of Ethercat SDO upload block usage

Thu, 25 Oct 2012 19:55:02 +0200Adding block library for SDO download and SDO upload
Laurent Bessard [Thu, 25 Oct 2012 19:55:02 +0200] rev 2086
Adding block library for SDO download and SDO upload

Fri, 19 Oct 2012 16:37:54 +0200Fix bug in CIA402 slave digital inputs
Laurent Bessard [Fri, 19 Oct 2012 16:37:54 +0200] rev 2085
Fix bug in CIA402 slave digital inputs

Fri, 19 Oct 2012 12:43:42 +0200Adding support to enable CIA402 slave digital inputs
Laurent Bessard [Fri, 19 Oct 2012 12:43:42 +0200] rev 2084
Adding support to enable CIA402 slave digital inputs

Thu, 18 Oct 2012 01:23:35 +0200Fix Axis_Ref type defined in VariableLocationTree
Laurent Bessard [Thu, 18 Oct 2012 01:23:35 +0200] rev 2083
Fix Axis_Ref type defined in VariableLocationTree

Wed, 17 Oct 2012 19:12:08 +0200Adding support for selecting a PDO in a list of mutually exclusive configured PDOs in Ethercat Network Configurator
Laurent Bessard [Wed, 17 Oct 2012 19:12:08 +0200] rev 2082
Adding support for selecting a PDO in a list of mutually exclusive configured PDOs in Ethercat Network Configurator

Sat, 13 Oct 2012 22:48:05 +0200Fix bug in endianization in value transmit and received by SDO
Laurent Bessard [Sat, 13 Oct 2012 22:48:05 +0200] rev 2081
Fix bug in endianization in value transmit and received by SDO

Sun, 23 Sep 2012 23:52:47 +0200Fix bug when modifying slave position
Laurent Bessard [Sun, 23 Sep 2012 23:52:47 +0200] rev 2080
Fix bug when modifying slave position

Sun, 23 Sep 2012 23:25:57 +0200Fix C code Generator to use CoE section contained in the slave ESI file for defining Ethercat network configuration
Laurent Bessard [Sun, 23 Sep 2012 23:25:57 +0200] rev 2079
Fix C code Generator to use CoE section contained in the slave ESI file for defining Ethercat network configuration

Sat, 22 Sep 2012 12:07:06 +0200Merged
Laurent Bessard [Sat, 22 Sep 2012 12:07:06 +0200] rev 2078
Merged

Wed, 19 Sep 2012 11:03:25 +0200Fix bug when modifying slave position
Laurent Bessard [Wed, 19 Sep 2012 11:03:25 +0200] rev 2077
Fix bug when modifying slave position

Fri, 21 Sep 2012 16:02:33 +0200Better jitter compensation before sending Ethercat frame. Jitter can be compensed in both directions, within some limits
Edouard Tisserant [Fri, 21 Sep 2012 16:02:33 +0200] rev 2076
Better jitter compensation before sending Ethercat frame. Jitter can be compensed in both directions, within some limits

Wed, 19 Sep 2012 03:30:58 +0200Different etherlab sequencing within retrieve and publish. Now, timer is polled after PLC exec until frame have to be sent. This slightly reduce jitter, compared to previous sequencing
Edouard Tisserant [Wed, 19 Sep 2012 03:30:58 +0200] rev 2075
Different etherlab sequencing within retrieve and publish. Now, timer is polled after PLC exec until frame have to be sent. This slightly reduce jitter, compared to previous sequencing

Thu, 13 Sep 2012 11:07:51 +0200Adding support for loading Profile dictionaries only if needed
Laurent Bessard [Thu, 13 Sep 2012 11:07:51 +0200] rev 2074
Adding support for loading Profile dictionaries only if needed

Wed, 12 Sep 2012 18:13:28 +0200Fix bug modules present in all groups with the same name even if they are defined by different vendors
Laurent Bessard [Wed, 12 Sep 2012 18:13:28 +0200] rev 2073
Fix bug modules present in all groups with the same name even if they are defined by different vendors

Sun, 09 Sep 2012 22:59:07 +0200Fix bug variable entries table column headers not translated
Laurent Bessard [Sun, 09 Sep 2012 22:59:07 +0200] rev 2072
Fix bug variable entries table column headers not translated

Fri, 07 Sep 2012 18:30:35 +0200Fix import after integration of plcopeneditor into Beremiz
Laurent Bessard [Fri, 07 Sep 2012 18:30:35 +0200] rev 2071
Fix import after integration of plcopeneditor into Beremiz

Tue, 04 Sep 2012 15:00:35 +0200Removing call to UpdateAxis and ComputeAxis in CIA DS402 node generated retrieve and publish functions. These calls have been transfered to MCL library retrieve and publish functions.
Laurent Bessard [Tue, 04 Sep 2012 15:00:35 +0200] rev 2070
Removing call to UpdateAxis and ComputeAxis in CIA DS402 node generated retrieve and publish functions. These calls have been transfered to MCL library retrieve and publish functions.

Fri, 20 Jul 2012 02:13:07 +0200Fix bug with AXIS_REF allocation
Laurent Bessard [Fri, 20 Jul 2012 02:13:07 +0200] rev 2069
Fix bug with AXIS_REF allocation

Mon, 25 Jun 2012 20:06:17 +0200Adding support using plcopeneditor bitmap library for icon request
Laurent Bessard [Mon, 25 Jun 2012 20:06:17 +0200] rev 2068
Adding support using plcopeneditor bitmap library for icon request

Mon, 25 Jun 2012 12:12:51 +0200Fix bug slave information panel not refreshed when slave type changed
Laurent Bessard [Mon, 25 Jun 2012 12:12:51 +0200] rev 2067
Fix bug slave information panel not refreshed when slave type changed

Tue, 19 Jun 2012 20:28:05 +0200Fix bug when modifying node parameters
Laurent Bessard [Tue, 19 Jun 2012 20:28:05 +0200] rev 2066
Fix bug when modifying node parameters

Mon, 11 Jun 2012 02:37:23 +0200Merged
laurent [Mon, 11 Jun 2012 02:37:23 +0200] rev 2065
Merged

Mon, 11 Jun 2012 02:25:57 +0200Fix disable dynamic PDOs support
Laurent Bessard [Mon, 11 Jun 2012 02:25:57 +0200] rev 2064
Fix disable dynamic PDOs support

Mon, 11 Jun 2012 01:21:26 +0200Fix bug with AXIS_REF located variable drag'n drop and disable dynamic PDOs support
Laurent Bessard [Mon, 11 Jun 2012 01:21:26 +0200] rev 2063
Fix bug with AXIS_REF located variable drag'n drop and disable dynamic PDOs support

Sun, 10 Jun 2012 20:16:17 +0200Adding support for getting CIA402 slave AXIS_REF located variables and disabling dynamic PDO mapping algorithm for drives than doesn't support this functionality
Laurent Bessard [Sun, 10 Jun 2012 20:16:17 +0200] rev 2062
Adding support for getting CIA402 slave AXIS_REF located variables and disabling dynamic PDO mapping algorithm for drives than doesn't support this functionality

Mon, 04 Jun 2012 19:00:58 +0200Changed AXIS_REF registration call name
Edouard Tisserant [Mon, 04 Jun 2012 19:00:58 +0200] rev 2061
Changed AXIS_REF registration call name

Wed, 23 May 2012 16:30:41 +0200Fixing bug on ConfNodeEditors refresh
Laurent Bessard [Wed, 23 May 2012 16:30:41 +0200] rev 2060
Fixing bug on ConfNodeEditors refresh

Wed, 23 May 2012 16:13:49 +0200fixed multiple cia402 instance symbol collision
Edouard Tisserant [Wed, 23 May 2012 16:13:49 +0200] rev 2059
fixed multiple cia402 instance symbol collision

Wed, 23 May 2012 10:39:14 +0200Replacing Panel by ScrolledWindow for displaying node information for more clarity when window is small
Laurent Bessard [Wed, 23 May 2012 10:39:14 +0200] rev 2058
Replacing Panel by ScrolledWindow for displaying node information for more clarity when window is small

Tue, 22 May 2012 22:28:05 +0200Removing ModesOfOperation parameter until handled by MCL
Laurent Bessard [Tue, 22 May 2012 22:28:05 +0200] rev 2057
Removing ModesOfOperation parameter until handled by MCL

Mon, 21 May 2012 18:47:56 +0200Fix bug with VariablesList on Windows
laurent [Mon, 21 May 2012 18:47:56 +0200] rev 2056
Fix bug with VariablesList on Windows

Mon, 21 May 2012 10:21:41 +0200refactoring
laurent [Mon, 21 May 2012 10:21:41 +0200] rev 2055
refactoring

Mon, 21 May 2012 10:07:35 +0200Merged
laurent [Mon, 21 May 2012 10:07:35 +0200] rev 2054
Merged

Mon, 21 May 2012 10:07:11 +0200refactoring
laurent [Mon, 21 May 2012 10:07:11 +0200] rev 2053
refactoring

Mon, 21 May 2012 09:31:15 +0200Merged
laurent [Mon, 21 May 2012 09:31:15 +0200] rev 2052
Merged

Fri, 18 May 2012 18:51:07 +0200refactoring
laurent [Fri, 18 May 2012 18:51:07 +0200] rev 2051
refactoring

Mon, 21 May 2012 04:34:10 +0200Fixed example build with installer 1.1
Edouard Tisserant [Mon, 21 May 2012 04:34:10 +0200] rev 2050
Fixed example build with installer 1.1

Sun, 20 May 2012 23:05:36 +0200updated examples also
Edouard Tisserant [Sun, 20 May 2012 23:05:36 +0200] rev 2049
updated examples also

Sun, 20 May 2012 22:42:37 +0200reflected changes in beremiz extension mechanism
Edouard Tisserant [Sun, 20 May 2012 22:42:37 +0200] rev 2048
reflected changes in beremiz extension mechanism

Mon, 14 May 2012 07:43:40 +0900Fixed wrong PDO in unused sync managers\nFix higen drive ethercat example
edouard_and_laurent [Mon, 14 May 2012 07:43:40 +0900] rev 2047
Fixed wrong PDO in unused sync managers\nFix higen drive ethercat example

Mon, 30 Apr 2012 16:21:30 +0200Fix Ethercat xsd files
laurent [Mon, 30 Apr 2012 16:21:30 +0200] rev 2046
Fix Ethercat xsd files

Sun, 01 Apr 2012 16:36:41 +0200Adding test project using higen drive
laurent [Sun, 01 Apr 2012 16:36:41 +0200] rev 2045
Adding test project using higen drive

Sat, 31 Mar 2012 15:13:14 +0200Adding forgotten icons
laurent [Sat, 31 Mar 2012 15:13:14 +0200] rev 2044
Adding forgotten icons

Wed, 21 Mar 2012 11:15:47 +0100Adding plugin icons and replacing reference to DS402 by CIA402
laurent [Wed, 21 Mar 2012 11:15:47 +0100] rev 2043
Adding plugin icons and replacing reference to DS402 by CIA402

Mon, 19 Mar 2012 00:45:19 +0100Adding support for remotely scanning Etherlab network and automatically configure it
laurent [Mon, 19 Mar 2012 00:45:19 +0100] rev 2042
Adding support for remotely scanning Etherlab network and automatically configure it

Sun, 18 Mar 2012 23:57:32 +0100Defining all slaves as Etherlab master subplugin instead of editing them in an editor with vertical notebook
laurent [Sun, 18 Mar 2012 23:57:32 +0100] rev 2041
Defining all slaves as Etherlab master subplugin instead of editing them in an editor with vertical notebook

Sun, 11 Mar 2012 21:57:00 +0100Adding Ethercat network scan command for testing (print result, network configuration not modified)
laurent [Sun, 11 Mar 2012 21:57:00 +0100] rev 2040
Adding Ethercat network scan command for testing (print result, network configuration not modified)

Sun, 11 Mar 2012 21:53:35 +0100Adding support for uploading default value for unused entries in output pdos from slaves before starting master
laurent [Sun, 11 Mar 2012 21:53:35 +0100] rev 2039
Adding support for uploading default value for unused entries in output pdos from slaves before starting master

Sun, 11 Mar 2012 19:32:44 +0100Replacing wx.Grid control by a wx.TreeListCtrl for displaying slaves entries
laurent [Sun, 11 Mar 2012 19:32:44 +0100] rev 2038
Replacing wx.Grid control by a wx.TreeListCtrl for displaying slaves entries

Wed, 29 Feb 2012 12:00:20 +0100Fix bug when trying to drag'n drop variable from slave variables grid
laurent [Wed, 29 Feb 2012 12:00:20 +0100] rev 2037
Fix bug when trying to drag'n drop variable from slave variables grid

Thu, 23 Feb 2012 23:34:40 +0100Adding support for setting TargetPosition only if PositionSetPoint value from MCL is valid
laurent [Thu, 23 Feb 2012 23:34:40 +0100] rev 2036
Adding support for setting TargetPosition only if PositionSetPoint value from MCL is valid

Thu, 23 Feb 2012 15:48:19 +0100Fix bug with PowerFeedback value
laurent [Thu, 23 Feb 2012 15:48:19 +0100] rev 2035
Fix bug with PowerFeedback value

Wed, 22 Feb 2012 01:39:22 +0100Adding support for MCL
laurent [Wed, 22 Feb 2012 01:39:22 +0100] rev 2034
Adding support for MCL

Thu, 16 Feb 2012 18:40:13 +0100Added test directory
Edouard Tisserant [Thu, 16 Feb 2012 18:40:13 +0100] rev 2033
Added test directory

Wed, 15 Feb 2012 00:38:26 +0100Adding support for DS402 node subplugin (only simple state transition implemented)
laurent [Wed, 15 Feb 2012 00:38:26 +0100] rev 2032
Adding support for DS402 node subplugin (only simple state transition implemented)

Tue, 07 Feb 2012 19:45:45 +0100Fix some issues regarding arbitrary variable mapping
laurent [Tue, 07 Feb 2012 19:45:45 +0100] rev 2031
Fix some issues regarding arbitrary variable mapping

Wed, 01 Feb 2012 00:04:58 +0100Moving Add and Remove button to Plugin menu items
laurent [Wed, 01 Feb 2012 00:04:58 +0100] rev 2030
Moving Add and Remove button to Plugin menu items

Tue, 17 Jan 2012 17:24:53 +0100Adding support for displaying slave sync managers and profile object dictionary and for arbitrarily mapping variable through variable location
laurent [Tue, 17 Jan 2012 17:24:53 +0100] rev 2029
Adding support for displaying slave sync managers and profile object dictionary and for arbitrarily mapping variable through variable location

Tue, 10 Jan 2012 15:11:22 +0100Merge with Donggu modifications
laurent [Tue, 10 Jan 2012 15:11:22 +0100] rev 2028
Merge with Donggu modifications

Tue, 10 Jan 2012 15:10:08 +0100Merge with Donggu modifications
laurent [Tue, 10 Jan 2012 15:10:08 +0100] rev 2027
Merge with Donggu modifications

Sun, 08 Jan 2012 19:05:05 +0100Adding support for drag'n dropping located variables from topology panel to configurations and resources variable panel for declaring global located variables
laurent [Sun, 08 Jan 2012 19:05:05 +0100] rev 2026
Adding support for drag'n dropping located variables from topology panel to configurations and resources variable panel for declaring global located variables

Thu, 22 Dec 2011 14:52:18 +0900Master relase code added
Donggu Kang <dgkang@higenmotor.com> [Thu, 22 Dec 2011 14:52:18 +0900] rev 2025
Master relase code added

Thu, 22 Dec 2011 14:44:58 +0900Master release code added
Donggu Kang <dgkang@higenmotor.com> [Thu, 22 Dec 2011 14:44:58 +0900] rev 2024
Master release code added

Tue, 20 Dec 2011 23:43:27 +0100Adding support for not configuring pdos when not mandatory and not needed by locations defined in PLC program. Adding support for displaying locations tree in Topology panel and BrowseLocationsDialog. Merging pdos grid and variables grid into one single grid in slave infos panel.
laurent [Tue, 20 Dec 2011 23:43:27 +0100] rev 2023
Adding support for not configuring pdos when not mandatory and not needed by locations defined in PLC program. Adding support for displaying locations tree in Topology panel and BrowseLocationsDialog. Merging pdos grid and variables grid into one single grid in slave infos panel.

Sun, 18 Dec 2011 19:42:13 +0100First working implementation of Beremiz plugin for etherlab
laurent [Sun, 18 Dec 2011 19:42:13 +0100] rev 2022
First working implementation of Beremiz plugin for etherlab

Mon, 11 Jun 2018 08:34:15 +0200merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 11 Jun 2018 08:34:15 +0200] rev 2021
merge

Fri, 08 Jun 2018 13:28:00 +0200Add BACnet extension from Mario de Sousa <msousa@fe.up.pt>
Edouard Tisserant [Fri, 08 Jun 2018 13:28:00 +0200] rev 2020
Add BACnet extension from Mario de Sousa <msousa@fe.up.pt>

Fri, 08 Jun 2018 09:43:48 +0200Make Modbus extension license compatible with the rest of Beremiz IDE python code : GPLv2.
Edouard Tisserant [Fri, 08 Jun 2018 09:43:48 +0200] rev 2019
Make Modbus extension license compatible with the rest of Beremiz IDE python code : GPLv2.

Mon, 04 Jun 2018 11:22:08 +0200Commented out safety check to prevent deadlock in wxEvaluator, since wx Mainloop is not anymore in main thread. That safety check actually leads to having wx code running outside of MainLoop
Edouard Tisserant [Mon, 04 Jun 2018 11:22:08 +0200] rev 2018
Commented out safety check to prevent deadlock in wxEvaluator, since wx Mainloop is not anymore in main thread. That safety check actually leads to having wx code running outside of MainLoop

Wed, 23 May 2018 20:22:45 +0200Merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Wed, 23 May 2018 20:22:45 +0200] rev 2017
Merge

Wed, 23 May 2018 12:13:48 +0300Print version information about software used for tests
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 12:13:48 +0300] rev 2016
Print version information about software used for tests

Wed, 23 May 2018 11:48:34 +0300Fix codestyle
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 11:48:34 +0300] rev 2015
Fix codestyle

Wed, 23 May 2018 11:47:56 +0300Fix typos introduced by 9fa2f8e "Fixed random segfault happening when loading new PLC in runtime, when using Xenonai."
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Wed, 23 May 2018 11:47:56 +0300] rev 2014
Fix typos introduced by 9fa2f8e "Fixed random segfault happening when loading new PLC in runtime, when using Xenonai."

Tue, 22 May 2018 17:28:18 +0300merged changes in README.md
Andrey Skvortsov <andrej.skvortzov@gmail.com> [Tue, 22 May 2018 17:28:18 +0300] rev 2013
merged changes in README.md

Mon, 12 Mar 2018 14:10:19 +0000add python-cycler dependence in readme
Sergey Surkov <surkovsv93@gmail.com> [Mon, 12 Mar 2018 14:10:19 +0000] rev 2012
add python-cycler dependence in readme

Wed, 23 May 2018 10:53:57 +0200Make Modbus mutexes non blocking for PLC. If data related to some modbus request is alredy locked when PLC wants to access it, then data isn't copied to/from PLC
Edouard Tisserant [Wed, 23 May 2018 10:53:57 +0200] rev 2011
Make Modbus mutexes non blocking for PLC. If data related to some modbus request is alredy locked when PLC wants to access it, then data isn't copied to/from PLC

Thu, 17 May 2018 09:33:58 +0200Merged #2476, URI dialog fixes
Edouard Tisserant [Thu, 17 May 2018 09:33:58 +0200] rev 2010
Merged #2476, URI dialog fixes

Thu, 17 May 2018 09:33:14 +0200close branch #2476 - URI dialog fixed #2476
Edouard Tisserant [Thu, 17 May 2018 09:33:14 +0200] rev 2009
close branch #2476 - URI dialog fixed

Mon, 14 May 2018 13:26:35 +0200#2476 Changes to the comment. #2476
dporopat <denis.poropat@smarteh.si> [Mon, 14 May 2018 13:26:35 +0200] rev 2008
#2476 Changes to the comment.

Thu, 10 May 2018 13:11:11 +0200#2476 Connectors dialog module added. #2476
dporopat <denis.poropat@smarteh.si> [Thu, 10 May 2018 13:11:11 +0200] rev 2007
#2476 Connectors dialog module added.

Wed, 09 May 2018 15:09:54 +0200#2476 Separate connectors dialogs from connectors module. #2476
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 15:09:54 +0200] rev 2006
#2476 Separate connectors dialogs from connectors module.

Wed, 09 May 2018 11:16:27 +0200#2476 Additional check added if we can import wx. #2476
dporopat <denis.poropat@smarteh.si> [Wed, 09 May 2018 11:16:27 +0200] rev 2005
#2476 Additional check added if we can import wx.

Thu, 10 May 2018 08:33:50 +0200Allow deleting configuration tree node with no corresponding directory in project tree
Edouard Tisserant [Thu, 10 May 2018 08:33:50 +0200] rev 2004
Allow deleting configuration tree node with no corresponding directory in project tree

Mon, 07 May 2018 15:10:39 +0200Support unicode in LDFLAGS returned by extensions
Edouard Tisserant [Mon, 07 May 2018 15:10:39 +0200] rev 2003
Support unicode in LDFLAGS returned by extensions

Mon, 07 May 2018 14:19:08 +0200Fixed typos
Edouard Tisserant [Mon, 07 May 2018 14:19:08 +0200] rev 2002
Fixed typos

Fri, 20 Apr 2018 11:21:20 +0200#2476 Added uri location editor, getting connectors from list in Beremiz. #2476
dporopat <denis.poropat@smarteh.si> [Fri, 20 Apr 2018 11:21:20 +0200] rev 2001
#2476 Added uri location editor, getting connectors from list in Beremiz.

Fri, 27 Apr 2018 16:32:53 +0200Fixed random segfault happening when loading new PLC in runtime, when using Xenonai.
Edouard Tisserant [Fri, 27 Apr 2018 16:32:53 +0200] rev 2000
Fixed random segfault happening when loading new PLC in runtime, when using Xenonai.

Thu, 19 Apr 2018 15:17:05 +0200PEP-8 and PyLint
Edouard Tisserant [Thu, 19 Apr 2018 15:17:05 +0200] rev 1999
PEP-8 and PyLint

Thu, 19 Apr 2018 15:03:23 +0200merged Denis change to apply input as we type in CTN configuration forms text fieds
Edouard Tisserant [Thu, 19 Apr 2018 15:03:23 +0200] rev 1998
merged Denis change to apply input as we type in CTN configuration forms text fieds

Thu, 19 Apr 2018 14:53:42 +0200PEP-8 and PyLint
Edouard Tisserant [Thu, 19 Apr 2018 14:53:42 +0200] rev 1997
PEP-8 and PyLint

Thu, 19 Apr 2018 13:09:41 +0200Add safety check to prevent exception when disconnecting while debugging
Edouard Tisserant [Thu, 19 Apr 2018 13:09:41 +0200] rev 1996
Add safety check to prevent exception when disconnecting while debugging

Thu, 19 Apr 2018 13:02:13 +0200Removed DebugThread. Take advantage of the fact that buffering is done in runtime. No need to poll for traces more than ten per second, then use simple wxTimer for that. Also removed Debug Lock since now everything happens in wx' mainloop.
Edouard Tisserant [Thu, 19 Apr 2018 13:02:13 +0200] rev 1995
Removed DebugThread. Take advantage of the fact that buffering is done in runtime. No need to poll for traces more than ten per second, then use simple wxTimer for that. Also removed Debug Lock since now everything happens in wx' mainloop.

Thu, 19 Apr 2018 12:22:40 +0200Rework of runtime non-real-time threading, and shared object dynamic loading :
Edouard Tisserant [Thu, 19 Apr 2018 12:22:40 +0200] rev 1994
Rework of runtime non-real-time threading, and shared object dynamic loading :
- All exposed operations on PLCObject are now serialized through main thread
(@RunInMain). Only one exception : python trace thread calling _GetDebugData
- Re-loading of same shared object is prevented. dlclose/delte/rewrite/dlopen
don't happen in that case. This is a workaround for some xenomai copperplate
bug triggering segfault, inbetween delete and rewrite.
- Trace thread now waits for data, dies if no data, and dies instead of
suspending as before when no data consumed after 3 seconds.
- Disabled threading in Pyro client
- Enforced auxiliary threads starting sequence : Pyro -> [UI] ->
PLCWorker.RunLoop

Tue, 17 Apr 2018 11:19:18 +0200Stripped forgotten debug code
Edouard Tisserant [Tue, 17 Apr 2018 11:19:18 +0200] rev 1993
Stripped forgotten debug code

Thu, 19 Apr 2018 15:06:10 +0200close branch #2476
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 19 Apr 2018 15:06:10 +0200] rev 1992
close branch

Thu, 19 Apr 2018 09:50:00 +0200#2476 Fix for saving text in URI edit text box. No need to click out of URI edit text box to save edited text. #2476
dporopat <denis.poropat@smarteh.si> [Thu, 19 Apr 2018 09:50:00 +0200] rev 1991
#2476 Fix for saving text in URI edit text box. No need to click out of URI edit text box to save edited text.

Mon, 16 Apr 2018 16:11:18 +0200Fixed Xenomai 3 PLC stop freeze. Now use explicit finish command with pipes. Closing both ends of pipes doesn't abort blocking read anymore.
Edouard Tisserant [Mon, 16 Apr 2018 16:11:18 +0200] rev 1990
Fixed Xenomai 3 PLC stop freeze. Now use explicit finish command with pipes. Closing both ends of pipes doesn't abort blocking read anymore.

Mon, 16 Apr 2018 11:00:04 +0200More canonical test.
Edouard Tisserant [Mon, 16 Apr 2018 11:00:04 +0200] rev 1989
More canonical test.
There is an exception happening around here in some cases when connection is dropped while waiting for answer. Not sure that this fixes it but this is anyhow better.

Sat, 14 Apr 2018 10:09:33 +0200PLCObject got more methods serialized through worker : Start, Stop, NewPLC.
Edouard Tisserant [Sat, 14 Apr 2018 10:09:33 +0200] rev 1988
PLCObject got more methods serialized through worker : Start, Stop, NewPLC.
This particularly helps with initialization/startup/re-load problems
when targeting Xenomai. It should help in general for runtime robustness,
since those operations aren't meant to be executed concurrently.

Fri, 13 Apr 2018 00:29:52 +0200Fixed implementation of runtime worker that ensure that PLCObject Load and Unload methods always run main thread.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 13 Apr 2018 00:29:52 +0200] rev 1987
Fixed implementation of runtime worker that ensure that PLCObject Load and Unload methods always run main thread.

Thu, 12 Apr 2018 22:32:43 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 12 Apr 2018 22:32:43 +0200] rev 1986
merged

Thu, 12 Apr 2018 22:32:12 +0200merged
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 12 Apr 2018 22:32:12 +0200] rev 1985
merged

Thu, 12 Apr 2018 22:20:38 +0200Intermediate state while implementing runtime worker to ensure that PLCObject Load and Unload methods always run main thread.
Edouard Tisserant [Thu, 12 Apr 2018 22:20:38 +0200] rev 1984
Intermediate state while implementing runtime worker to ensure that PLCObject Load and Unload methods always run main thread.

Thu, 12 Apr 2018 16:38:09 +0200Stripped more dead code.
Edouard Tisserant [Thu, 12 Apr 2018 16:38:09 +0200] rev 1983
Stripped more dead code.

Thu, 12 Apr 2018 16:33:44 +0200Cleanup of some dead code in PYRO connector.
Edouard Tisserant [Thu, 12 Apr 2018 16:33:44 +0200] rev 1982
Cleanup of some dead code in PYRO connector.

Thu, 12 Apr 2018 16:31:30 +0200Added logging in Xenomai init phase.
Edouard Tisserant [Thu, 12 Apr 2018 16:31:30 +0200] rev 1981
Added logging in Xenomai init phase.

Thu, 12 Apr 2018 16:29:43 +0200Apply new RT Pipes API from Xenomai 3
Edouard Tisserant [Thu, 12 Apr 2018 16:29:43 +0200] rev 1980
Apply new RT Pipes API from Xenomai 3

Thu, 12 Apr 2018 16:27:22 +0200Removed useless try/except in Canfestival.py
Edouard Tisserant [Thu, 12 Apr 2018 16:27:22 +0200] rev 1979
Removed useless try/except in Canfestival.py

Tue, 10 Apr 2018 13:36:36 +0200#2579 On showing search result, text color of tree item is set to white. We need to change back color to show the result.
dporopat <denis.poropat@smarteh.si> [Tue, 10 Apr 2018 13:36:36 +0200] rev 1978
#2579 On showing search result, text color of tree item is set to white. We need to change back color to show the result.

Thu, 29 Mar 2018 23:33:36 +0200PEP-8...
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 29 Mar 2018 23:33:36 +0200] rev 1977
PEP-8...

Thu, 29 Mar 2018 23:25:26 +0200Fixed bug that was creating many frames at starup on Windows
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 29 Mar 2018 23:25:26 +0200] rev 1976
Fixed bug that was creating many frames at starup on Windows

Sun, 25 Mar 2018 16:22:36 +0200re-merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 25 Mar 2018 16:22:36 +0200] rev 1975
re-merge

Mon, 19 Mar 2018 16:18:17 +0100Xenomai 3
Edouard Tisserant [Mon, 19 Mar 2018 16:18:17 +0100] rev 1974
Xenomai 3

Fri, 02 Mar 2018 17:01:25 +0100merged Sergeys changes
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 02 Mar 2018 17:01:25 +0100] rev 1973
merged Sergeys changes

Mon, 19 Feb 2018 19:36:43 +0300fix bug with indelible values in some 'optional' fields in project properties panel
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:36:43 +0300] rev 1972
fix bug with indelible values in some 'optional' fields in project properties panel

only 'required' fields should be indelible

Mon, 19 Feb 2018 19:10:07 +0300make the URI model compatible with https
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:10:07 +0300] rev 1971
make the URI model compatible with https

Mon, 19 Feb 2018 19:02:25 +0300add address validation in Company URL field
Surkov Sergey <surkovsv93@gmail.com> [Mon, 19 Feb 2018 19:02:25 +0300] rev 1970
add address validation in Company URL field

Fri, 02 Feb 2018 17:16:04 +0300remove duplicating code for variables name generate
Surkov Sergey <surkovsv93@gmail.com> [Fri, 02 Feb 2018 17:16:04 +0300] rev 1969
remove duplicating code for variables name generate

Wed, 31 Jan 2018 16:31:01 +0300add fields autocomplete when adding task or instance in resources
Surkov Sergey <surkovsv93@gmail.com> [Wed, 31 Jan 2018 16:31:01 +0300] rev 1968
add fields autocomplete when adding task or instance in resources

values will be copied from previous row, first row fills with the default values

Thu, 18 Jan 2018 14:24:44 +0300fix search in TextViewer objects, search returns only first entry
Surkov Sergey <surkovsv93@gmail.com> [Thu, 18 Jan 2018 14:24:44 +0300] rev 1967
fix search in TextViewer objects, search returns only first entry

side effect of a63bb40

Thu, 18 Jan 2018 14:03:29 +0300fix import order according to PEP8
Surkov Sergey <surkovsv93@gmail.com> [Thu, 18 Jan 2018 14:03:29 +0300] rev 1966
fix import order according to PEP8

Mon, 15 Jan 2018 12:06:24 +0300fix default time range choice for debug variable panel
Surkov Sergey <surkovsv93@gmail.com> [Mon, 15 Jan 2018 12:06:24 +0300] rev 1965
fix default time range choice for debug variable panel

only localized versions were affected

Fri, 12 Jan 2018 18:36:02 +0300enlarge canvas border for debug variable graphic viewer
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 18:36:02 +0300] rev 1964
enlarge canvas border for debug variable graphic viewer

Fri, 12 Jan 2018 18:33:54 +0300fix rounding milliseconds from nanoseconds
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 18:33:54 +0300] rev 1963
fix rounding milliseconds from nanoseconds

example:rounding 299999 ns to 300ms, if division result is an
integer, remainder will be lost, and result will be 299.

Fri, 12 Jan 2018 17:56:48 +0300fix display TIME type variables in debug variable panel
Surkov Sergey <surkovsv93@gmail.com> [Fri, 12 Jan 2018 17:56:48 +0300] rev 1962
fix display TIME type variables in debug variable panel

Thu, 01 Mar 2018 14:28:55 +0100fix for test app from skv. thanks
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 14:28:55 +0100] rev 1961
fix for test app from skv. thanks

Thu, 01 Mar 2018 10:28:17 +0100Prevent catching exception if exception handling was not enabled (or disabled by test test app).
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 10:28:17 +0100] rev 1960
Prevent catching exception if exception handling was not enabled (or disabled by test test app).

Thu, 01 Mar 2018 09:41:12 +0100pep8 and pylint hate me
Edouard Tisserant <edouard.tisserant@gmail.com> [Thu, 01 Mar 2018 09:41:12 +0100] rev 1959
pep8 and pylint hate me

Wed, 28 Feb 2018 16:10:05 +0100Fixed typo introduced in 5736d25bb393
Edouard Tisserant [Wed, 28 Feb 2018 16:10:05 +0100] rev 1958
Fixed typo introduced in 5736d25bb393

Fri, 23 Feb 2018 11:16:25 +0100GetEditedElementInstancesInfos now optimized as well. Forgotten because not using [R.I.P]LibraryResolver, but still XSLT compiling was hapenning on each call.
Edouard Tisserant [Fri, 23 Feb 2018 11:16:25 +0100] rev 1957
GetEditedElementInstancesInfos now optimized as well. Forgotten because not using [R.I.P]LibraryResolver, but still XSLT compiling was hapenning on each call.

Tue, 20 Feb 2018 15:09:01 +0100Another attempt to make BitBuket's version of pylint happy.
Edouard Tisserant [Tue, 20 Feb 2018 15:09:01 +0100] rev 1956
Another attempt to make BitBuket's version of pylint happy.

Tue, 20 Feb 2018 14:46:12 +0100Attempt to make BitBuket's version of pep8 and pylint happy.
Edouard Tisserant [Tue, 20 Feb 2018 14:46:12 +0100] rev 1955
Attempt to make BitBuket's version of pep8 and pylint happy.

Tue, 20 Feb 2018 14:24:30 +0100Removed dead slow code
Edouard Tisserant [Tue, 20 Feb 2018 14:24:30 +0100] rev 1954
Removed dead slow code

Tue, 20 Feb 2018 14:16:51 +0100PEP8 and PyLint conformance: whitespaces and stuff
Edouard Tisserant [Tue, 20 Feb 2018 14:16:51 +0100] rev 1953
PEP8 and PyLint conformance: whitespaces and stuff

Tue, 20 Feb 2018 11:24:40 +0100Copy pasted, no time wasted !
Edouard Tisserant [Tue, 20 Feb 2018 11:24:40 +0100] rev 1952
Copy pasted, no time wasted !

Tue, 20 Feb 2018 11:24:10 +0100GetVariableDictionary and GetPouInterfaceReturnType optimized with new VariableInfoCollector based on XSLTModelQuery. Moved corresponding definitions out of PLCControler.py.
Edouard Tisserant [Tue, 20 Feb 2018 11:24:10 +0100] rev 1951
GetVariableDictionary and GetPouInterfaceReturnType optimized with new VariableInfoCollector based on XSLTModelQuery. Moved corresponding definitions out of PLCControler.py.

Mon, 19 Feb 2018 15:46:50 +0100GetPouInstanceTagName optimized with XSLTModelQuery.
Edouard Tisserant [Mon, 19 Feb 2018 15:46:50 +0100] rev 1950
GetPouInstanceTagName optimized with XSLTModelQuery.

Mon, 19 Feb 2018 15:15:36 +0100Better writing of some xpath added in previous commits about XSLT optimization.
Edouard Tisserant [Mon, 19 Feb 2018 15:15:36 +0100] rev 1949
Better writing of some xpath added in previous commits about XSLT optimization.

Mon, 19 Feb 2018 15:14:30 +0100Moved some definitions away from controller class, and adaped references them through all code.
Edouard Tisserant [Mon, 19 Feb 2018 15:14:30 +0100] rev 1948
Moved some definitions away from controller class, and adaped references them through all code.

Mon, 19 Feb 2018 13:24:57 +0100Hook Beremiz Launcher AppStart to AdvancedSplash OnPaint event in order to ensure image is beeing displayed before loading.
Edouard Tisserant [Mon, 19 Feb 2018 13:24:57 +0100] rev 1947
Hook Beremiz Launcher AppStart to AdvancedSplash OnPaint event in order to ensure image is beeing displayed before loading.

Sun, 18 Feb 2018 22:29:35 +0100Avoid endline escaping in multiline xpath epressions in xslt. '&#10;' Is apparently ignored but never know...
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 22:29:35 +0100] rev 1946
Avoid endline escaping in multiline xpath epressions in xslt. '&#10;' Is apparently ignored but never know...

Sun, 18 Feb 2018 21:51:33 +0100Fixed earlier XSLT optimizations. Some/most results were missing.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 21:51:33 +0100] rev 1945
Fixed earlier XSLT optimizations. Some/most results were missing.

Sun, 18 Feb 2018 21:30:48 +0100Moved some code from PLCController.py to other modules. Added necessary imports.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sun, 18 Feb 2018 21:30:48 +0100] rev 1944
Moved some code from PLCController.py to other modules. Added necessary imports.

Sat, 17 Feb 2018 23:58:47 +0100GetPouVariables optimized with XSLTModelQuery
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 17 Feb 2018 23:58:47 +0100] rev 1943
GetPouVariables optimized with XSLTModelQuery

Sat, 17 Feb 2018 16:42:56 +0100Added /plcopen/InstancesPathCollector.py, to move more model xslt querying code away from PLCController.py.
Edouard Tisserant <edouard.tisserant@gmail.com> [Sat, 17 Feb 2018 16:42:56 +0100] rev 1942
Added /plcopen/InstancesPathCollector.py, to move more model xslt querying code away from PLCController.py.

Fri, 16 Feb 2018 18:38:30 +0100Fixed Exception dialog disapearing after a view second when exception occurs during app startup.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 18:38:30 +0100] rev 1941
Fixed Exception dialog disapearing after a view second when exception occurs during app startup.
Problem was caused by splashscreen timeout, wx closing averything else if there is no more main frame.
Changes:
- no more timeout for splashscreen
- use wx.App OnInit method to give first operation to mainloop, object are then now created in mainloop
- main loop is then created _before_ showing splash screen
- no more wxyield or wx processevent tricks needed to display splash screen
- exception handler not blocking anymore on dialog (callafter)
- because of mainloop being there before everything, exit must be called explicitely if exception caught during startup -> exit parameter in handle_exception + try/except around startup calls

UNTESTED ON WINDOWS

Fri, 16 Feb 2018 18:24:55 +0100Moved XSLTModelQuery class to own module in plcopen package.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 18:24:55 +0100] rev 1940
Moved XSLTModelQuery class to own module in plcopen package.

Fri, 16 Feb 2018 13:00:06 +0100Added a class to speedup all XSLT queries. WIP, now only for instances_path.xslt / GetInstanceList()
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 13:00:06 +0100] rev 1939
Added a class to speedup all XSLT queries. WIP, now only for instances_path.xslt / GetInstanceList()

Fri, 16 Feb 2018 03:24:11 +0100Stripped useless node creation in instances_path stylesheet.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 03:24:11 +0100] rev 1938
Stripped useless node creation in instances_path stylesheet.

Fri, 16 Feb 2018 02:29:10 +0100This should really help GetInstanceList to perform better: resolver removed, no more deepcopy, no more useless xml serialization, no more node-set() calls.
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 02:29:10 +0100] rev 1937
This should really help GetInstanceList to perform better: resolver removed, no more deepcopy, no more useless xml serialization, no more node-set() calls.

Fri, 16 Feb 2018 01:48:48 +0100YSLT auto indent trick is useless here, added yslt_noindent.yml2, regenerated XSLT files
Edouard Tisserant <edouard.tisserant@gmail.com> [Fri, 16 Feb 2018 01:48:48 +0100] rev 1936
YSLT auto indent trick is useless here, added yslt_noindent.yml2, regenerated XSLT files

Fri, 16 Feb 2018 01:38:34 +0100Prevent compiling XSLT on each call of GetInstanceList. To be continued. More optimization needed here. 100x would be fine...
Edouard Tisserant [Fri, 16 Feb 2018 01:38:34 +0100] rev 1935
Prevent compiling XSLT on each call of GetInstanceList. To be continued. More optimization needed here. 100x would be fine...

Wed, 14 Feb 2018 15:39:27 +0100Changed meaning of -c commandline argument for Beremiz service : only gives DEFAULT wamp config.
Edouard Tisserant [Wed, 14 Feb 2018 15:39:27 +0100] rev 1934
Changed meaning of -c commandline argument for Beremiz service : only gives DEFAULT wamp config.
If existing project already has a wamp config, it is taken instead.

Wed, 14 Feb 2018 14:50:10 +0100Factorized duplicated code
Edouard Tisserant [Wed, 14 Feb 2018 14:50:10 +0100] rev 1933
Factorized duplicated code

Wed, 14 Feb 2018 14:48:40 +0100Better variable naming, and small optimization.
Edouard Tisserant [Wed, 14 Feb 2018 14:48:40 +0100] rev 1932
Better variable naming, and small optimization.

Tue, 13 Feb 2018 14:01:20 +0100Unclutter graphics package scope.
Edouard Tisserant [Tue, 13 Feb 2018 14:01:20 +0100] rev 1931
Unclutter graphics package scope.
Moved some import statements from "graphics" package to "viewer" module.
It also avoid systematic import of everything in graphics when we only need one submodule.

Tue, 13 Feb 2018 13:57:53 +0100Removed dead code
Edouard Tisserant [Tue, 13 Feb 2018 13:57:53 +0100] rev 1930
Removed dead code

Mon, 12 Feb 2018 13:18:53 +0100Fixed pyro timeout for runtime, was set too short and runtime was disconnecting when building PLC
Edouard Tisserant [Mon, 12 Feb 2018 13:18:53 +0100] rev 1929
Fixed pyro timeout for runtime, was set too short and runtime was disconnecting when building PLC

Mon, 12 Feb 2018 11:34:07 +0100Ask to stop PLC before transfer if it is running
Edouard Tisserant [Mon, 12 Feb 2018 11:34:07 +0100] rev 1928
Ask to stop PLC before transfer if it is running

Mon, 12 Feb 2018 11:32:48 +0100Factorized some repeated refresh code into a method, to allow customisation.
Edouard Tisserant [Mon, 12 Feb 2018 11:32:48 +0100] rev 1927
Factorized some repeated refresh code into a method, to allow customisation.

Mon, 05 Feb 2018 16:23:51 +0100Launcher : add a debug attribute, instead of BMZ_DBG, so that customization can use it.
Edouard Tisserant [Mon, 05 Feb 2018 16:23:51 +0100] rev 1926
Launcher : add a debug attribute, instead of BMZ_DBG, so that customization can use it.

Fri, 02 Feb 2018 16:25:32 +0100Stripped old dead code.
Edouard Tisserant [Fri, 02 Feb 2018 16:25:32 +0100] rev 1925
Stripped old dead code.

Fri, 02 Feb 2018 16:24:56 +0100More changes in Launcher. Modules to be loaded in the background are given in a list, and assigned as object attributes. Also splitted CreateUI into CloseSplashScreen and CreatueUI.
Edouard Tisserant [Fri, 02 Feb 2018 16:24:56 +0100] rev 1924
More changes in Launcher. Modules to be loaded in the background are given in a list, and assigned as object attributes. Also splitted CreateUI into CloseSplashScreen and CreatueUI.

Fri, 02 Feb 2018 16:22:25 +0100ClassImporter now accepts string, callable or class, for compatibility with some old extensions.
Edouard Tisserant [Fri, 02 Feb 2018 16:22:25 +0100] rev 1923
ClassImporter now accepts string, callable or class, for compatibility with some old extensions.

Fri, 02 Feb 2018 11:12:03 +0100Launcher: ShowUI call moves from preStart to start. ShowUI() split into CreateUI() and ShowUI(). Start()'s arguments are passed to CreateUI()
Edouard Tisserant [Fri, 02 Feb 2018 11:12:03 +0100] rev 1922
Launcher: ShowUI call moves from preStart to start. ShowUI() split into CreateUI() and ShowUI(). Start()'s arguments are passed to CreateUI()
This is meant to allow customizations to pass own pre-instanciated controller to UI at startup.

Fri, 02 Feb 2018 11:07:39 +0100Launcher: allows customizations to specify what globals passed to extensions
Edouard Tisserant [Fri, 02 Feb 2018 11:07:39 +0100] rev 1921
Launcher: allows customizations to specify what globals passed to extensions

Fri, 02 Feb 2018 11:06:41 +0100Documentation
Edouard Tisserant [Fri, 02 Feb 2018 11:06:41 +0100] rev 1920
Documentation

Thu, 01 Feb 2018 14:51:18 +0100Another set of meaningless changes to satisfy PEP8 and PyLint.
Edouard Tisserant [Thu, 01 Feb 2018 14:51:18 +0100] rev 1919
Another set of meaningless changes to satisfy PEP8 and PyLint.

Wed, 31 Jan 2018 15:25:30 +0100PEP8 conformity for modbus. Most of it done by autopep8, plus some easy refactoring.
Edouard Tisserant [Wed, 31 Jan 2018 15:25:30 +0100] rev 1918
PEP8 conformity for modbus. Most of it done by autopep8, plus some easy refactoring.

Wed, 31 Jan 2018 15:22:43 +0100Add some class factory function to ease declaration of simple POU libraries in customizations (i.e. TC6 XML file only, no special C code generation)
Edouard Tisserant [Wed, 31 Jan 2018 15:22:43 +0100] rev 1917
Add some class factory function to ease declaration of simple POU libraries in customizations (i.e. TC6 XML file only, no special C code generation)

Wed, 31 Jan 2018 15:20:42 +0100Small pep8 conformity enforcement.
Edouard Tisserant [Wed, 31 Jan 2018 15:20:42 +0100] rev 1916
Small pep8 conformity enforcement.

Wed, 31 Jan 2018 11:29:17 +0100Better have globals passed to python extensions (-e) than locals.
Edouard Tisserant [Wed, 31 Jan 2018 11:29:17 +0100] rev 1915
Better have globals passed to python extensions (-e) than locals.

Wed, 31 Jan 2018 11:21:08 +0100launcher : move call to ShowSplashScreen and BackgroundInitialization to PreStart()
Edouard Tisserant [Wed, 31 Jan 2018 11:21:08 +0100] rev 1914
launcher : move call to ShowSplashScreen and BackgroundInitialization to PreStart()
It doesn't change behaviour of launcher in beremiz, but may have some impact on some customizations.
Some customizations need to squeeze some bitmap folder init in between app creation and ShowSplashScreen

Tue, 30 Jan 2018 16:23:50 +0100modbus extension code cleanup, from smarteh's patch
Edouard Tisserant [Tue, 30 Jan 2018 16:23:50 +0100] rev 1913
modbus extension code cleanup, from smarteh's patch

Tue, 30 Jan 2018 16:06:58 +0100Merged Mario's modbus branch. Fixed line endings.
Edouard Tisserant [Tue, 30 Jan 2018 16:06:58 +0100] rev 1912
Merged Mario's modbus branch. Fixed line endings.

Fri, 24 Mar 2017 12:07:47 +0000merge
Mario de Sousa <msousa@fe.up.pt> [Fri, 24 Mar 2017 12:07:47 +0000] rev 1911
merge

Sun, 05 Mar 2017 00:38:25 +0000Ignore bug report files.
Mario de Sousa <msousa@fe.up.pt> [Sun, 05 Mar 2017 00:38:25 +0000] rev 1910
Ignore bug report files.

Sun, 05 Mar 2017 00:37:54 +0000Add support for Modbus (TCP and RTU) working as master & slave
Mario de Sousa <msousa@fe.up.pt> [Sun, 05 Mar 2017 00:37:54 +0000] rev 1909
Add support for Modbus (TCP and RTU) working as master & slave

Mon, 29 Jan 2018 13:31:14 +0100merge
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 29 Jan 2018 13:31:14 +0100] rev 1908
merge

Wed, 24 Jan 2018 16:12:49 +0100fixed erro introduced 2 commits ago (-e) : tuples have no reverse() method
Edouard Tisserant [Wed, 24 Jan 2018 16:12:49 +0100] rev 1907
fixed erro introduced 2 commits ago (-e) : tuples have no reverse() method

Wed, 24 Jan 2018 15:44:36 +0100Trying to get better logging/display of exceptions at runtime's startup
Edouard Tisserant [Wed, 24 Jan 2018 15:44:36 +0100] rev 1906
Trying to get better logging/display of exceptions at runtime's startup

Wed, 24 Jan 2018 14:48:49 +0100Changed way to deal with extensions arguments (-e) so that path and filename are stored independently and accessible for extensions themselves.
Edouard Tisserant [Wed, 24 Jan 2018 14:48:49 +0100] rev 1905
Changed way to deal with extensions arguments (-e) so that path and filename are stored independently and accessible for extensions themselves.

Mon, 29 Jan 2018 12:56:49 +0100Textviewer : moved call to Colourise in a better place, so that ST highlighting gets also updated when typing in some case, not only IL
Edouard Tisserant <edouard.tisserant@gmail.com> [Mon, 29 Jan 2018 12:56:49 +0100] rev 1904
Textviewer : moved call to Colourise in a better place, so that ST highlighting gets also updated when typing in some case, not only IL

Fri, 19 Jan 2018 15:12:23 +0100Main runtime template C code : Added HAVE_RETAIN preprocessor definition for customized build to signal it provides IEC-61131 Retain memory handling function. Removed targets/Xenomai/plc_Xenomai_noretain.c, now useless.
Edouard Tisserant [Fri, 19 Jan 2018 15:12:23 +0100] rev 1903
Main runtime template C code : Added HAVE_RETAIN preprocessor definition for customized build to signal it provides IEC-61131 Retain memory handling function. Removed targets/Xenomai/plc_Xenomai_noretain.c, now useless.

Mon, 15 Jan 2018 14:43:53 +0100Clarify licensing, and packaging of runtime only files :
Edouard Tisserant [Mon, 15 Jan 2018 14:43:53 +0100] rev 1902
Clarify licensing, and packaging of runtime only files :
- moved and split targets/typemapping.py into runtime/typemapping.py and runtime/loglevels.py
- added runtime_files.list pointing to files necessary for runtime, and referring to runtime license

Thu, 11 Jan 2018 15:41:20 +0100Enforced check_source.sh pep8 and pylint rules.
Edouard Tisserant [Thu, 11 Jan 2018 15:41:20 +0100] rev 1901
Enforced check_source.sh pep8 and pylint rules.

Thu, 11 Jan 2018 15:39:58 +0100runtime/WAMP: Fixed secret loading into configuration. Fixed secret commandline switch handling.
Edouard Tisserant [Thu, 11 Jan 2018 15:39:58 +0100] rev 1900
runtime/WAMP: Fixed secret loading into configuration. Fixed secret commandline switch handling.

Thu, 11 Jan 2018 13:02:09 +0100runtime/WAMP : was 'Added time print on session left.' from dporopat. Purpose is to log (dis/re)connection, to help debugging connection problem
Edouard Tisserant [Thu, 11 Jan 2018 13:02:09 +0100] rev 1899
runtime/WAMP : was 'Added time print on session left.' from dporopat. Purpose is to log (dis/re)connection, to help debugging connection problem

Thu, 11 Jan 2018 12:48:49 +0100runtime/Wamp : adapt to unicode being enforced in latest crossbar API. Updated some documentation, to explain why there is unused definitions like SubscribedEvents or DoOnJoin.
Edouard Tisserant [Thu, 11 Jan 2018 12:48:49 +0100] rev 1898
runtime/Wamp : adapt to unicode being enforced in latest crossbar API. Updated some documentation, to explain why there is unused definitions like SubscribedEvents or DoOnJoin.

Wed, 10 Jan 2018 15:36:03 +0100Extend python<->PLC global variable description "GlobalDesc" to support Initial value setting.
Edouard Tisserant [Wed, 10 Jan 2018 15:36:03 +0100] rev 1897
Extend python<->PLC global variable description "GlobalDesc" to support Initial value setting.

Rebased from dporopat change "add initial value to runtime.py file", which means :
- GlobalDesc is used by some customized beremiz python runtime
- Those runtimes need to know what is initial value of these special variables

Wed, 10 Jan 2018 14:35:04 +0100update tests/wamp README file, based on changes from dporopat.
Edouard Tisserant [Wed, 10 Jan 2018 14:35:04 +0100] rev 1896
update tests/wamp README file, based on changes from dporopat.

Wed, 10 Jan 2018 13:23:40 +0100Fixed WAMP test (crossbar confile upgrade and use same ID on both PLC and IDE side)
Edouard Tisserant [Wed, 10 Jan 2018 13:23:40 +0100] rev 1895
Fixed WAMP test (crossbar confile upgrade and use same ID on both PLC and IDE side)

Wed, 10 Jan 2018 13:21:42 +0100Fixed changes from dporopat and agregorcic about WAMP CRA and config.
Edouard Tisserant [Wed, 10 Jan 2018 13:21:42 +0100] rev 1894
Fixed changes from dporopat and agregorcic about WAMP CRA and config.

Tue, 09 Jan 2018 15:08:08 +0100WAMP runtime : changes from dporopat and agregorcic, adding CRA (-s) and changed way to load WAMP conf (-c)
Edouard Tisserant [Tue, 09 Jan 2018 15:08:08 +0100] rev 1893
WAMP runtime : changes from dporopat and agregorcic, adding CRA (-s) and changed way to load WAMP conf (-c)
- added Challenge Response Authentication,
- use -s commandline switch to give the shared secret.
- WAMP configuration now either given as -c commandline switch
or taken as default wampconf.json in project files.

Tue, 09 Jan 2018 14:52:56 +0100Set WAMP registration option so that reconnecting while earlier session still didn't timeout is possible (in case of connection lost, for example).
Edouard Tisserant [Tue, 09 Jan 2018 14:52:56 +0100] rev 1892
Set WAMP registration option so that reconnecting while earlier session still didn't timeout is possible (in case of connection lost, for example).

Tue, 09 Jan 2018 14:50:41 +0100More canonical overload of ReconnectingClientFactory (according twisted doc)
Edouard Tisserant [Tue, 09 Jan 2018 14:50:41 +0100] rev 1891
More canonical overload of ReconnectingClientFactory (according twisted doc)

Tue, 09 Jan 2018 14:42:23 +0100non significant print syntax change. ready for py3.
Edouard Tisserant [Tue, 09 Jan 2018 14:42:23 +0100] rev 1890
non significant print syntax change. ready for py3.

Tue, 09 Jan 2018 14:38:45 +0100whitespace cosmetic for pep8
Edouard Tisserant [Tue, 09 Jan 2018 14:38:45 +0100] rev 1889
whitespace cosmetic for pep8

Mon, 08 Jan 2018 11:09:02 +0100Added arbitrary timeout on Pyro, to force it to free memory after disconnect.
Edouard Tisserant [Mon, 08 Jan 2018 11:09:02 +0100] rev 1888
Added arbitrary timeout on Pyro, to force it to free memory after disconnect.

Fri, 05 Jan 2018 15:39:02 +0100Moved code from to Beremiz_service.py Server class Start method to Loop method to allow customisation by hot patching. Also renamed Stop method as _stop and use Restart instead of Stop from everywhere else to make it clear that _stop actually does restart...
Edouard Tisserant [Fri, 05 Jan 2018 15:39:02 +0100] rev 1887
Moved code from to Beremiz_service.py Server class Start method to Loop method to allow customisation by hot patching. Also renamed Stop method as _stop and use Restart instead of Stop from everywhere else to make it clear that _stop actually does restart...

Thu, 04 Jan 2018 16:00:35 +0100enforce PEP8 in previous commit
Edouard Tisserant [Thu, 04 Jan 2018 16:00:35 +0100] rev 1886
enforce PEP8 in previous commit

Fri, 20 Jan 2017 13:22:31 +0100replaced normal panel with scrolled panel under project properties
dporopat <denis.poropat@smarteh.si> [Fri, 20 Jan 2017 13:22:31 +0100] rev 1885
replaced normal panel with scrolled panel under project properties

Tue, 05 Dec 2017 12:38:04 +0300fix missing root in empty search results panel
Surkov Sergey <surkovsv93@gmail.com> [Tue, 05 Dec 2017 12:38:04 +0300] rev 1884
fix missing root in empty search results panel